1 /************************************************************************** 2 * Initio 9100 device driver for Linux. 3 * 4 * Copyright (c) 1994-1998 Initio Corporation 5 * Copyright (c) 1998 Bas Vermeulen <bvermeul@blackstar.xs4all.nl> 6 * Copyright (c) 2004 Christoph Hellwig <hch@lst.de> 7 * Copyright (c) 2007 Red Hat 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License as published by 11 * the Free Software Foundation; either version 2, or (at your option) 12 * any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; see the file COPYING. If not, write to 21 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. 22 * 23 * 24 ************************************************************************* 25 * 26 * DESCRIPTION: 27 * 28 * This is the Linux low-level SCSI driver for Initio INI-9X00U/UW SCSI host 29 * adapters 30 * 31 * 08/06/97 hc - v1.01h 32 * - Support inic-940 and inic-935 33 * 09/26/97 hc - v1.01i 34 * - Make correction from J.W. Schultz suggestion 35 * 10/13/97 hc - Support reset function 36 * 10/21/97 hc - v1.01j 37 * - Support 32 LUN (SCSI 3) 38 * 01/14/98 hc - v1.01k 39 * - Fix memory allocation problem 40 * 03/04/98 hc - v1.01l 41 * - Fix tape rewind which will hang the system problem 42 * - Set can_queue to initio_num_scb 43 * 06/25/98 hc - v1.01m 44 * - Get it work for kernel version >= 2.1.75 45 * - Dynamic assign SCSI bus reset holding time in initio_init() 46 * 07/02/98 hc - v1.01n 47 * - Support 0002134A 48 * 08/07/98 hc - v1.01o 49 * - Change the initio_abort_srb routine to use scsi_done. <01> 50 * 09/07/98 hl - v1.02 51 * - Change the INI9100U define and proc_dir_entry to 52 * reflect the newer Kernel 2.1.118, but the v1.o1o 53 * should work with Kernel 2.1.118. 54 * 09/20/98 wh - v1.02a 55 * - Support Abort command. 56 * - Handle reset routine. 57 * 09/21/98 hl - v1.03 58 * - remove comments. 59 * 12/09/98 bv - v1.03a 60 * - Removed unused code 61 * 12/13/98 bv - v1.03b 62 * - Remove cli() locking for kernels >= 2.1.95. This uses 63 * spinlocks to serialize access to the pSRB_head and 64 * pSRB_tail members of the HCS structure. 65 * 09/01/99 bv - v1.03d 66 * - Fixed a deadlock problem in SMP. 67 * 21/01/99 bv - v1.03e 68 * - Add support for the Domex 3192U PCI SCSI 69 * This is a slightly modified patch by 70 * Brian Macy <bmacy@sunshinecomputing.com> 71 * 22/02/99 bv - v1.03f 72 * - Didn't detect the INIC-950 in 2.0.x correctly. 73 * Now fixed. 74 * 05/07/99 bv - v1.03g 75 * - Changed the assumption that HZ = 100 76 * 10/17/03 mc - v1.04 77 * - added new DMA API support 78 * 06/01/04 jmd - v1.04a 79 * - Re-add reset_bus support 80 **************************************************************************/ 81 82 #include <linux/module.h> 83 #include <linux/errno.h> 84 #include <linux/delay.h> 85 #include <linux/pci.h> 86 #include <linux/init.h> 87 #include <linux/blkdev.h> 88 #include <linux/spinlock.h> 89 #include <linux/stat.h> 90 #include <linux/kernel.h> 91 #include <linux/proc_fs.h> 92 #include <linux/string.h> 93 #include <linux/interrupt.h> 94 #include <linux/ioport.h> 95 #include <linux/slab.h> 96 #include <linux/jiffies.h> 97 #include <linux/dma-mapping.h> 98 #include <asm/io.h> 99 100 #include <scsi/scsi.h> 101 #include <scsi/scsi_cmnd.h> 102 #include <scsi/scsi_device.h> 103 #include <scsi/scsi_host.h> 104 #include <scsi/scsi_tcq.h> 105 106 #include "initio.h" 107 108 #define SENSE_SIZE 14 109 110 #define i91u_MAXQUEUE 2 111 #define i91u_REVID "Initio INI-9X00U/UW SCSI device driver; Revision: 1.04a" 112 113 #ifdef DEBUG_i91u 114 static unsigned int i91u_debug = DEBUG_DEFAULT; 115 #endif 116 117 static int initio_tag_enable = 1; 118 119 #ifdef DEBUG_i91u 120 static int setup_debug = 0; 121 #endif 122 123 static void i91uSCBPost(u8 * pHcb, u8 * pScb); 124 125 #define DEBUG_INTERRUPT 0 126 #define DEBUG_QUEUE 0 127 #define DEBUG_STATE 0 128 #define INT_DISC 0 129 130 /*--- forward references ---*/ 131 static struct scsi_ctrl_blk *initio_find_busy_scb(struct initio_host * host, u16 tarlun); 132 static struct scsi_ctrl_blk *initio_find_done_scb(struct initio_host * host); 133 134 static int tulip_main(struct initio_host * host); 135 136 static int initio_next_state(struct initio_host * host); 137 static int initio_state_1(struct initio_host * host); 138 static int initio_state_2(struct initio_host * host); 139 static int initio_state_3(struct initio_host * host); 140 static int initio_state_4(struct initio_host * host); 141 static int initio_state_5(struct initio_host * host); 142 static int initio_state_6(struct initio_host * host); 143 static int initio_state_7(struct initio_host * host); 144 static int initio_xfer_data_in(struct initio_host * host); 145 static int initio_xfer_data_out(struct initio_host * host); 146 static int initio_xpad_in(struct initio_host * host); 147 static int initio_xpad_out(struct initio_host * host); 148 static int initio_status_msg(struct initio_host * host); 149 150 static int initio_msgin(struct initio_host * host); 151 static int initio_msgin_sync(struct initio_host * host); 152 static int initio_msgin_accept(struct initio_host * host); 153 static int initio_msgout_reject(struct initio_host * host); 154 static int initio_msgin_extend(struct initio_host * host); 155 156 static int initio_msgout_ide(struct initio_host * host); 157 static int initio_msgout_abort_targ(struct initio_host * host); 158 static int initio_msgout_abort_tag(struct initio_host * host); 159 160 static int initio_bus_device_reset(struct initio_host * host); 161 static void initio_select_atn(struct initio_host * host, struct scsi_ctrl_blk * scb); 162 static void initio_select_atn3(struct initio_host * host, struct scsi_ctrl_blk * scb); 163 static void initio_select_atn_stop(struct initio_host * host, struct scsi_ctrl_blk * scb); 164 static int int_initio_busfree(struct initio_host * host); 165 static int int_initio_scsi_rst(struct initio_host * host); 166 static int int_initio_bad_seq(struct initio_host * host); 167 static int int_initio_resel(struct initio_host * host); 168 static int initio_sync_done(struct initio_host * host); 169 static int wdtr_done(struct initio_host * host); 170 static int wait_tulip(struct initio_host * host); 171 static int initio_wait_done_disc(struct initio_host * host); 172 static int initio_wait_disc(struct initio_host * host); 173 static void tulip_scsi(struct initio_host * host); 174 static int initio_post_scsi_rst(struct initio_host * host); 175 176 static void initio_se2_ew_en(unsigned long base); 177 static void initio_se2_ew_ds(unsigned long base); 178 static int initio_se2_rd_all(unsigned long base); 179 static void initio_se2_update_all(unsigned long base); /* setup default pattern */ 180 static void initio_read_eeprom(unsigned long base); 181 182 /* ---- INTERNAL VARIABLES ---- */ 183 184 static NVRAM i91unvram; 185 static NVRAM *i91unvramp; 186 187 static u8 i91udftNvRam[64] = 188 { 189 /*----------- header -----------*/ 190 0x25, 0xc9, /* Signature */ 191 0x40, /* Size */ 192 0x01, /* Revision */ 193 /* -- Host Adapter Structure -- */ 194 0x95, /* ModelByte0 */ 195 0x00, /* ModelByte1 */ 196 0x00, /* ModelInfo */ 197 0x01, /* NumOfCh */ 198 NBC1_DEFAULT, /* BIOSConfig1 */ 199 0, /* BIOSConfig2 */ 200 0, /* HAConfig1 */ 201 0, /* HAConfig2 */ 202 /* SCSI channel 0 and target Structure */ 203 7, /* SCSIid */ 204 NCC1_DEFAULT, /* SCSIconfig1 */ 205 0, /* SCSIconfig2 */ 206 0x10, /* NumSCSItarget */ 207 208 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, 209 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, 210 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, 211 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, 212 213 /* SCSI channel 1 and target Structure */ 214 7, /* SCSIid */ 215 NCC1_DEFAULT, /* SCSIconfig1 */ 216 0, /* SCSIconfig2 */ 217 0x10, /* NumSCSItarget */ 218 219 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, 220 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, 221 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, 222 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, 223 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 224 0, 0}; /* - CheckSum - */ 225 226 227 static u8 initio_rate_tbl[8] = /* fast 20 */ 228 { 229 /* nanosecond divide by 4 */ 230 12, /* 50ns, 20M */ 231 18, /* 75ns, 13.3M */ 232 25, /* 100ns, 10M */ 233 31, /* 125ns, 8M */ 234 37, /* 150ns, 6.6M */ 235 43, /* 175ns, 5.7M */ 236 50, /* 200ns, 5M */ 237 62 /* 250ns, 4M */ 238 }; 239 240 static void initio_do_pause(unsigned amount) 241 { 242 /* Pause for amount jiffies */ 243 unsigned long the_time = jiffies + amount; 244 245 while (time_before_eq(jiffies, the_time)) 246 cpu_relax(); 247 } 248 249 /*-- forward reference --*/ 250 251 /****************************************************************** 252 Input: instruction for Serial E2PROM 253 254 EX: se2_rd(0 call se2_instr() to send address and read command 255 256 StartBit OP_Code Address Data 257 --------- -------- ------------------ ------- 258 1 1 , 0 A5,A4,A3,A2,A1,A0 D15-D0 259 260 +----------------------------------------------------- 261 | 262 CS -----+ 263 +--+ +--+ +--+ +--+ +--+ 264 ^ | ^ | ^ | ^ | ^ | 265 | | | | | | | | | | 266 CLK -------+ +--+ +--+ +--+ +--+ +-- 267 (leading edge trigger) 268 269 +--1-----1--+ 270 | SB OP | OP A5 A4 271 DI ----+ +--0------------------ 272 (address and cmd sent to nvram) 273 274 -------------------------------------------+ 275 | 276 DO +--- 277 (data sent from nvram) 278 279 280 ******************************************************************/ 281 282 /** 283 * initio_se2_instr - bitbang an instruction 284 * @base: Base of InitIO controller 285 * @instr: Instruction for serial E2PROM 286 * 287 * Bitbang an instruction out to the serial E2Prom 288 */ 289 290 static void initio_se2_instr(unsigned long base, u8 instr) 291 { 292 int i; 293 u8 b; 294 295 outb(SE2CS | SE2DO, base + TUL_NVRAM); /* cs+start bit */ 296 udelay(30); 297 outb(SE2CS | SE2CLK | SE2DO, base + TUL_NVRAM); /* +CLK */ 298 udelay(30); 299 300 for (i = 0; i < 8; i++) { 301 if (instr & 0x80) 302 b = SE2CS | SE2DO; /* -CLK+dataBit */ 303 else 304 b = SE2CS; /* -CLK */ 305 outb(b, base + TUL_NVRAM); 306 udelay(30); 307 outb(b | SE2CLK, base + TUL_NVRAM); /* +CLK */ 308 udelay(30); 309 instr <<= 1; 310 } 311 outb(SE2CS, base + TUL_NVRAM); /* -CLK */ 312 udelay(30); 313 } 314 315 316 /** 317 * initio_se2_ew_en - Enable erase/write 318 * @base: Base address of InitIO controller 319 * 320 * Enable erase/write state of serial EEPROM 321 */ 322 void initio_se2_ew_en(unsigned long base) 323 { 324 initio_se2_instr(base, 0x30); /* EWEN */ 325 outb(0, base + TUL_NVRAM); /* -CS */ 326 udelay(30); 327 } 328 329 330 /** 331 * initio_se2_ew_ds - Disable erase/write 332 * @base: Base address of InitIO controller 333 * 334 * Disable erase/write state of serial EEPROM 335 */ 336 void initio_se2_ew_ds(unsigned long base) 337 { 338 initio_se2_instr(base, 0); /* EWDS */ 339 outb(0, base + TUL_NVRAM); /* -CS */ 340 udelay(30); 341 } 342 343 344 /** 345 * initio_se2_rd - read E2PROM word 346 * @base: Base of InitIO controller 347 * @addr: Address of word in E2PROM 348 * 349 * Read a word from the NV E2PROM device 350 */ 351 static u16 initio_se2_rd(unsigned long base, u8 addr) 352 { 353 u8 instr, rb; 354 u16 val = 0; 355 int i; 356 357 instr = (u8) (addr | 0x80); 358 initio_se2_instr(base, instr); /* READ INSTR */ 359 360 for (i = 15; i >= 0; i--) { 361 outb(SE2CS | SE2CLK, base + TUL_NVRAM); /* +CLK */ 362 udelay(30); 363 outb(SE2CS, base + TUL_NVRAM); /* -CLK */ 364 365 /* sample data after the following edge of clock */ 366 rb = inb(base + TUL_NVRAM); 367 rb &= SE2DI; 368 val += (rb << i); 369 udelay(30); /* 6/20/95 */ 370 } 371 372 outb(0, base + TUL_NVRAM); /* no chip select */ 373 udelay(30); 374 return val; 375 } 376 377 /** 378 * initio_se2_wr - read E2PROM word 379 * @base: Base of InitIO controller 380 * @addr: Address of word in E2PROM 381 * @val: Value to write 382 * 383 * Write a word to the NV E2PROM device. Used when recovering from 384 * a problem with the NV. 385 */ 386 static void initio_se2_wr(unsigned long base, u8 addr, u16 val) 387 { 388 u8 rb; 389 u8 instr; 390 int i; 391 392 instr = (u8) (addr | 0x40); 393 initio_se2_instr(base, instr); /* WRITE INSTR */ 394 for (i = 15; i >= 0; i--) { 395 if (val & 0x8000) 396 outb(SE2CS | SE2DO, base + TUL_NVRAM); /* -CLK+dataBit 1 */ 397 else 398 outb(SE2CS, base + TUL_NVRAM); /* -CLK+dataBit 0 */ 399 udelay(30); 400 outb(SE2CS | SE2CLK, base + TUL_NVRAM); /* +CLK */ 401 udelay(30); 402 val <<= 1; 403 } 404 outb(SE2CS, base + TUL_NVRAM); /* -CLK */ 405 udelay(30); 406 outb(0, base + TUL_NVRAM); /* -CS */ 407 udelay(30); 408 409 outb(SE2CS, base + TUL_NVRAM); /* +CS */ 410 udelay(30); 411 412 for (;;) { 413 outb(SE2CS | SE2CLK, base + TUL_NVRAM); /* +CLK */ 414 udelay(30); 415 outb(SE2CS, base + TUL_NVRAM); /* -CLK */ 416 udelay(30); 417 if ((rb = inb(base + TUL_NVRAM)) & SE2DI) 418 break; /* write complete */ 419 } 420 outb(0, base + TUL_NVRAM); /* -CS */ 421 } 422 423 /** 424 * initio_se2_rd_all - read hostadapter NV configuration 425 * @base: Base address of InitIO controller 426 * 427 * Reads the E2PROM data into main memory. Ensures that the checksum 428 * and header marker are valid. Returns 1 on success -1 on error. 429 */ 430 431 static int initio_se2_rd_all(unsigned long base) 432 { 433 int i; 434 u16 chksum = 0; 435 u16 *np; 436 437 i91unvramp = &i91unvram; 438 np = (u16 *) i91unvramp; 439 for (i = 0; i < 32; i++) 440 *np++ = initio_se2_rd(base, i); 441 442 /* Is signature "ini" ok ? */ 443 if (i91unvramp->NVM_Signature != INI_SIGNATURE) 444 return -1; 445 /* Is ckecksum ok ? */ 446 np = (u16 *) i91unvramp; 447 for (i = 0; i < 31; i++) 448 chksum += *np++; 449 if (i91unvramp->NVM_CheckSum != chksum) 450 return -1; 451 return 1; 452 } 453 454 /** 455 * initio_se2_update_all - Update E2PROM 456 * @base: Base of InitIO controller 457 * 458 * Update the E2PROM by wrting any changes into the E2PROM 459 * chip, rewriting the checksum. 460 */ 461 static void initio_se2_update_all(unsigned long base) 462 { /* setup default pattern */ 463 int i; 464 u16 chksum = 0; 465 u16 *np, *np1; 466 467 i91unvramp = &i91unvram; 468 /* Calculate checksum first */ 469 np = (u16 *) i91udftNvRam; 470 for (i = 0; i < 31; i++) 471 chksum += *np++; 472 *np = chksum; 473 initio_se2_ew_en(base); /* Enable write */ 474 475 np = (u16 *) i91udftNvRam; 476 np1 = (u16 *) i91unvramp; 477 for (i = 0; i < 32; i++, np++, np1++) { 478 if (*np != *np1) 479 initio_se2_wr(base, i, *np); 480 } 481 initio_se2_ew_ds(base); /* Disable write */ 482 } 483 484 /** 485 * initio_read_eeprom - Retrieve configuration 486 * @base: Base of InitIO Host Adapter 487 * 488 * Retrieve the host adapter configuration data from E2Prom. If the 489 * data is invalid then the defaults are used and are also restored 490 * into the E2PROM. This forms the access point for the SCSI driver 491 * into the E2PROM layer, the other functions for the E2PROM are all 492 * internal use. 493 * 494 * Must be called single threaded, uses a shared global area. 495 */ 496 497 static void initio_read_eeprom(unsigned long base) 498 { 499 u8 gctrl; 500 501 i91unvramp = &i91unvram; 502 /* Enable EEProm programming */ 503 gctrl = inb(base + TUL_GCTRL); 504 outb(gctrl | TUL_GCTRL_EEPROM_BIT, base + TUL_GCTRL); 505 if (initio_se2_rd_all(base) != 1) { 506 initio_se2_update_all(base); /* setup default pattern */ 507 initio_se2_rd_all(base); /* load again */ 508 } 509 /* Disable EEProm programming */ 510 gctrl = inb(base + TUL_GCTRL); 511 outb(gctrl & ~TUL_GCTRL_EEPROM_BIT, base + TUL_GCTRL); 512 } 513 514 /** 515 * initio_stop_bm - stop bus master 516 * @host: InitIO we are stopping 517 * 518 * Stop any pending DMA operation, aborting the DMA if necessary 519 */ 520 521 static void initio_stop_bm(struct initio_host * host) 522 { 523 524 if (inb(host->addr + TUL_XStatus) & XPEND) { /* if DMA xfer is pending, abort DMA xfer */ 525 outb(TAX_X_ABT | TAX_X_CLR_FIFO, host->addr + TUL_XCmd); 526 /* wait Abort DMA xfer done */ 527 while ((inb(host->addr + TUL_Int) & XABT) == 0) 528 cpu_relax(); 529 } 530 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); 531 } 532 533 /** 534 * initio_reset_scsi - Reset SCSI host controller 535 * @host: InitIO host to reset 536 * @seconds: Recovery time 537 * 538 * Perform a full reset of the SCSI subsystem. 539 */ 540 541 static int initio_reset_scsi(struct initio_host * host, int seconds) 542 { 543 outb(TSC_RST_BUS, host->addr + TUL_SCtrl0); 544 545 while (!((host->jsint = inb(host->addr + TUL_SInt)) & TSS_SCSIRST_INT)) 546 cpu_relax(); 547 548 /* reset tulip chip */ 549 outb(0, host->addr + TUL_SSignal); 550 551 /* Stall for a while, wait for target's firmware ready,make it 2 sec ! */ 552 /* SONY 5200 tape drive won't work if only stall for 1 sec */ 553 /* FIXME: this is a very long busy wait right now */ 554 initio_do_pause(seconds * HZ); 555 556 inb(host->addr + TUL_SInt); 557 return SCSI_RESET_SUCCESS; 558 } 559 560 /** 561 * initio_init - set up an InitIO host adapter 562 * @host: InitIO host adapter 563 * @num_scbs: Number of SCBS 564 * @bios_addr: BIOS address 565 * 566 * Set up the host adapter and devices according to the configuration 567 * retrieved from the E2PROM. 568 * 569 * Locking: Calls E2PROM layer code which is not re-enterable so must 570 * run single threaded for now. 571 */ 572 573 static void initio_init(struct initio_host * host, u8 *bios_addr) 574 { 575 int i; 576 u8 *flags; 577 u8 *heads; 578 579 /* Get E2Prom configuration */ 580 initio_read_eeprom(host->addr); 581 if (i91unvramp->NVM_SCSIInfo[0].NVM_NumOfTarg == 8) 582 host->max_tar = 8; 583 else 584 host->max_tar = 16; 585 586 host->config = i91unvramp->NVM_SCSIInfo[0].NVM_ChConfig1; 587 588 host->scsi_id = i91unvramp->NVM_SCSIInfo[0].NVM_ChSCSIID; 589 host->idmask = ~(1 << host->scsi_id); 590 591 #ifdef CHK_PARITY 592 /* Enable parity error response */ 593 outb(inb(host->addr + TUL_PCMD) | 0x40, host->addr + TUL_PCMD); 594 #endif 595 596 /* Mask all the interrupt */ 597 outb(0x1F, host->addr + TUL_Mask); 598 599 initio_stop_bm(host); 600 /* --- Initialize the tulip --- */ 601 outb(TSC_RST_CHIP, host->addr + TUL_SCtrl0); 602 603 /* program HBA's SCSI ID */ 604 outb(host->scsi_id << 4, host->addr + TUL_SScsiId); 605 606 /* Enable Initiator Mode ,phase latch,alternate sync period mode, 607 disable SCSI reset */ 608 if (host->config & HCC_EN_PAR) 609 host->sconf1 = (TSC_INITDEFAULT | TSC_EN_SCSI_PAR); 610 else 611 host->sconf1 = (TSC_INITDEFAULT); 612 outb(host->sconf1, host->addr + TUL_SConfig); 613 614 /* Enable HW reselect */ 615 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); 616 617 outb(0, host->addr + TUL_SPeriod); 618 619 /* selection time out = 250 ms */ 620 outb(153, host->addr + TUL_STimeOut); 621 622 /* Enable SCSI terminator */ 623 outb((host->config & (HCC_ACT_TERM1 | HCC_ACT_TERM2)), 624 host->addr + TUL_XCtrl); 625 outb(((host->config & HCC_AUTO_TERM) >> 4) | 626 (inb(host->addr + TUL_GCTRL1) & 0xFE), 627 host->addr + TUL_GCTRL1); 628 629 for (i = 0, 630 flags = & (i91unvramp->NVM_SCSIInfo[0].NVM_Targ0Config), 631 heads = bios_addr + 0x180; 632 i < host->max_tar; 633 i++, flags++) { 634 host->targets[i].flags = *flags & ~(TCF_SYNC_DONE | TCF_WDTR_DONE); 635 if (host->targets[i].flags & TCF_EN_255) 636 host->targets[i].drv_flags = TCF_DRV_255_63; 637 else 638 host->targets[i].drv_flags = 0; 639 host->targets[i].js_period = 0; 640 host->targets[i].sconfig0 = host->sconf1; 641 host->targets[i].heads = *heads++; 642 if (host->targets[i].heads == 255) 643 host->targets[i].drv_flags = TCF_DRV_255_63; 644 else 645 host->targets[i].drv_flags = 0; 646 host->targets[i].sectors = *heads++; 647 host->targets[i].flags &= ~TCF_BUSY; 648 host->act_tags[i] = 0; 649 host->max_tags[i] = 0xFF; 650 } /* for */ 651 printk("i91u: PCI Base=0x%04X, IRQ=%d, BIOS=0x%04X0, SCSI ID=%d\n", 652 host->addr, host->pci_dev->irq, 653 host->bios_addr, host->scsi_id); 654 /* Reset SCSI Bus */ 655 if (host->config & HCC_SCSI_RESET) { 656 printk(KERN_INFO "i91u: Reset SCSI Bus ... \n"); 657 initio_reset_scsi(host, 10); 658 } 659 outb(0x17, host->addr + TUL_SCFG1); 660 outb(0xE9, host->addr + TUL_SIntEnable); 661 } 662 663 /** 664 * initio_alloc_scb - Allocate an SCB 665 * @host: InitIO host we are allocating for 666 * 667 * Walk the SCB list for the controller and allocate a free SCB if 668 * one exists. 669 */ 670 static struct scsi_ctrl_blk *initio_alloc_scb(struct initio_host *host) 671 { 672 struct scsi_ctrl_blk *scb; 673 unsigned long flags; 674 675 spin_lock_irqsave(&host->avail_lock, flags); 676 if ((scb = host->first_avail) != NULL) { 677 #if DEBUG_QUEUE 678 printk("find scb at %p\n", scb); 679 #endif 680 if ((host->first_avail = scb->next) == NULL) 681 host->last_avail = NULL; 682 scb->next = NULL; 683 scb->status = SCB_RENT; 684 } 685 spin_unlock_irqrestore(&host->avail_lock, flags); 686 return scb; 687 } 688 689 /** 690 * initio_release_scb - Release an SCB 691 * @host: InitIO host that owns the SCB 692 * @cmnd: SCB command block being returned 693 * 694 * Return an allocated SCB to the host free list 695 */ 696 697 static void initio_release_scb(struct initio_host * host, struct scsi_ctrl_blk * cmnd) 698 { 699 unsigned long flags; 700 701 #if DEBUG_QUEUE 702 printk("Release SCB %p; ", cmnd); 703 #endif 704 spin_lock_irqsave(&(host->avail_lock), flags); 705 cmnd->srb = NULL; 706 cmnd->status = 0; 707 cmnd->next = NULL; 708 if (host->last_avail != NULL) { 709 host->last_avail->next = cmnd; 710 host->last_avail = cmnd; 711 } else { 712 host->first_avail = cmnd; 713 host->last_avail = cmnd; 714 } 715 spin_unlock_irqrestore(&(host->avail_lock), flags); 716 } 717 718 /***************************************************************************/ 719 static void initio_append_pend_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp) 720 { 721 722 #if DEBUG_QUEUE 723 printk("Append pend SCB %p; ", scbp); 724 #endif 725 scbp->status = SCB_PEND; 726 scbp->next = NULL; 727 if (host->last_pending != NULL) { 728 host->last_pending->next = scbp; 729 host->last_pending = scbp; 730 } else { 731 host->first_pending = scbp; 732 host->last_pending = scbp; 733 } 734 } 735 736 /***************************************************************************/ 737 static void initio_push_pend_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp) 738 { 739 740 #if DEBUG_QUEUE 741 printk("Push pend SCB %p; ", scbp); 742 #endif 743 scbp->status = SCB_PEND; 744 if ((scbp->next = host->first_pending) != NULL) { 745 host->first_pending = scbp; 746 } else { 747 host->first_pending = scbp; 748 host->last_pending = scbp; 749 } 750 } 751 752 static struct scsi_ctrl_blk *initio_find_first_pend_scb(struct initio_host * host) 753 { 754 struct scsi_ctrl_blk *first; 755 756 757 first = host->first_pending; 758 while (first != NULL) { 759 if (first->opcode != ExecSCSI) 760 return first; 761 if (first->tagmsg == 0) { 762 if ((host->act_tags[first->target] == 0) && 763 !(host->targets[first->target].flags & TCF_BUSY)) 764 return first; 765 } else { 766 if ((host->act_tags[first->target] >= 767 host->max_tags[first->target]) | 768 (host->targets[first->target].flags & TCF_BUSY)) { 769 first = first->next; 770 continue; 771 } 772 return first; 773 } 774 first = first->next; 775 } 776 return first; 777 } 778 779 static void initio_unlink_pend_scb(struct initio_host * host, struct scsi_ctrl_blk * scb) 780 { 781 struct scsi_ctrl_blk *tmp, *prev; 782 783 #if DEBUG_QUEUE 784 printk("unlink pend SCB %p; ", scb); 785 #endif 786 787 prev = tmp = host->first_pending; 788 while (tmp != NULL) { 789 if (scb == tmp) { /* Unlink this SCB */ 790 if (tmp == host->first_pending) { 791 if ((host->first_pending = tmp->next) == NULL) 792 host->last_pending = NULL; 793 } else { 794 prev->next = tmp->next; 795 if (tmp == host->last_pending) 796 host->last_pending = prev; 797 } 798 tmp->next = NULL; 799 break; 800 } 801 prev = tmp; 802 tmp = tmp->next; 803 } 804 } 805 806 static void initio_append_busy_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp) 807 { 808 809 #if DEBUG_QUEUE 810 printk("append busy SCB %p; ", scbp); 811 #endif 812 if (scbp->tagmsg) 813 host->act_tags[scbp->target]++; 814 else 815 host->targets[scbp->target].flags |= TCF_BUSY; 816 scbp->status = SCB_BUSY; 817 scbp->next = NULL; 818 if (host->last_busy != NULL) { 819 host->last_busy->next = scbp; 820 host->last_busy = scbp; 821 } else { 822 host->first_busy = scbp; 823 host->last_busy = scbp; 824 } 825 } 826 827 /***************************************************************************/ 828 static struct scsi_ctrl_blk *initio_pop_busy_scb(struct initio_host * host) 829 { 830 struct scsi_ctrl_blk *tmp; 831 832 833 if ((tmp = host->first_busy) != NULL) { 834 if ((host->first_busy = tmp->next) == NULL) 835 host->last_busy = NULL; 836 tmp->next = NULL; 837 if (tmp->tagmsg) 838 host->act_tags[tmp->target]--; 839 else 840 host->targets[tmp->target].flags &= ~TCF_BUSY; 841 } 842 #if DEBUG_QUEUE 843 printk("Pop busy SCB %p; ", tmp); 844 #endif 845 return tmp; 846 } 847 848 /***************************************************************************/ 849 static void initio_unlink_busy_scb(struct initio_host * host, struct scsi_ctrl_blk * scb) 850 { 851 struct scsi_ctrl_blk *tmp, *prev; 852 853 #if DEBUG_QUEUE 854 printk("unlink busy SCB %p; ", scb); 855 #endif 856 857 prev = tmp = host->first_busy; 858 while (tmp != NULL) { 859 if (scb == tmp) { /* Unlink this SCB */ 860 if (tmp == host->first_busy) { 861 if ((host->first_busy = tmp->next) == NULL) 862 host->last_busy = NULL; 863 } else { 864 prev->next = tmp->next; 865 if (tmp == host->last_busy) 866 host->last_busy = prev; 867 } 868 tmp->next = NULL; 869 if (tmp->tagmsg) 870 host->act_tags[tmp->target]--; 871 else 872 host->targets[tmp->target].flags &= ~TCF_BUSY; 873 break; 874 } 875 prev = tmp; 876 tmp = tmp->next; 877 } 878 return; 879 } 880 881 struct scsi_ctrl_blk *initio_find_busy_scb(struct initio_host * host, u16 tarlun) 882 { 883 struct scsi_ctrl_blk *tmp, *prev; 884 u16 scbp_tarlun; 885 886 887 prev = tmp = host->first_busy; 888 while (tmp != NULL) { 889 scbp_tarlun = (tmp->lun << 8) | (tmp->target); 890 if (scbp_tarlun == tarlun) { /* Unlink this SCB */ 891 break; 892 } 893 prev = tmp; 894 tmp = tmp->next; 895 } 896 #if DEBUG_QUEUE 897 printk("find busy SCB %p; ", tmp); 898 #endif 899 return tmp; 900 } 901 902 static void initio_append_done_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp) 903 { 904 #if DEBUG_QUEUE 905 printk("append done SCB %p; ", scbp); 906 #endif 907 908 scbp->status = SCB_DONE; 909 scbp->next = NULL; 910 if (host->last_done != NULL) { 911 host->last_done->next = scbp; 912 host->last_done = scbp; 913 } else { 914 host->first_done = scbp; 915 host->last_done = scbp; 916 } 917 } 918 919 struct scsi_ctrl_blk *initio_find_done_scb(struct initio_host * host) 920 { 921 struct scsi_ctrl_blk *tmp; 922 923 if ((tmp = host->first_done) != NULL) { 924 if ((host->first_done = tmp->next) == NULL) 925 host->last_done = NULL; 926 tmp->next = NULL; 927 } 928 #if DEBUG_QUEUE 929 printk("find done SCB %p; ",tmp); 930 #endif 931 return tmp; 932 } 933 934 static int initio_abort_srb(struct initio_host * host, struct scsi_cmnd *srbp) 935 { 936 unsigned long flags; 937 struct scsi_ctrl_blk *tmp, *prev; 938 939 spin_lock_irqsave(&host->semaph_lock, flags); 940 941 if ((host->semaph == 0) && (host->active == NULL)) { 942 /* disable Jasmin SCSI Int */ 943 outb(0x1F, host->addr + TUL_Mask); 944 spin_unlock_irqrestore(&host->semaph_lock, flags); 945 /* FIXME: synchronize_irq needed ? */ 946 tulip_main(host); 947 spin_lock_irqsave(&host->semaph_lock, flags); 948 host->semaph = 1; 949 outb(0x0F, host->addr + TUL_Mask); 950 spin_unlock_irqrestore(&host->semaph_lock, flags); 951 return SCSI_ABORT_SNOOZE; 952 } 953 prev = tmp = host->first_pending; /* Check Pend queue */ 954 while (tmp != NULL) { 955 /* 07/27/98 */ 956 if (tmp->srb == srbp) { 957 if (tmp == host->active) { 958 spin_unlock_irqrestore(&host->semaph_lock, flags); 959 return SCSI_ABORT_BUSY; 960 } else if (tmp == host->first_pending) { 961 if ((host->first_pending = tmp->next) == NULL) 962 host->last_pending = NULL; 963 } else { 964 prev->next = tmp->next; 965 if (tmp == host->last_pending) 966 host->last_pending = prev; 967 } 968 tmp->hastat = HOST_ABORTED; 969 tmp->flags |= SCF_DONE; 970 if (tmp->flags & SCF_POST) 971 (*tmp->post) ((u8 *) host, (u8 *) tmp); 972 spin_unlock_irqrestore(&host->semaph_lock, flags); 973 return SCSI_ABORT_SUCCESS; 974 } 975 prev = tmp; 976 tmp = tmp->next; 977 } 978 979 prev = tmp = host->first_busy; /* Check Busy queue */ 980 while (tmp != NULL) { 981 if (tmp->srb == srbp) { 982 if (tmp == host->active) { 983 spin_unlock_irqrestore(&host->semaph_lock, flags); 984 return SCSI_ABORT_BUSY; 985 } else if (tmp->tagmsg == 0) { 986 spin_unlock_irqrestore(&host->semaph_lock, flags); 987 return SCSI_ABORT_BUSY; 988 } else { 989 host->act_tags[tmp->target]--; 990 if (tmp == host->first_busy) { 991 if ((host->first_busy = tmp->next) == NULL) 992 host->last_busy = NULL; 993 } else { 994 prev->next = tmp->next; 995 if (tmp == host->last_busy) 996 host->last_busy = prev; 997 } 998 tmp->next = NULL; 999 1000 1001 tmp->hastat = HOST_ABORTED; 1002 tmp->flags |= SCF_DONE; 1003 if (tmp->flags & SCF_POST) 1004 (*tmp->post) ((u8 *) host, (u8 *) tmp); 1005 spin_unlock_irqrestore(&host->semaph_lock, flags); 1006 return SCSI_ABORT_SUCCESS; 1007 } 1008 } 1009 prev = tmp; 1010 tmp = tmp->next; 1011 } 1012 spin_unlock_irqrestore(&host->semaph_lock, flags); 1013 return SCSI_ABORT_NOT_RUNNING; 1014 } 1015 1016 /***************************************************************************/ 1017 static int initio_bad_seq(struct initio_host * host) 1018 { 1019 struct scsi_ctrl_blk *scb; 1020 1021 printk("initio_bad_seg c=%d\n", host->index); 1022 1023 if ((scb = host->active) != NULL) { 1024 initio_unlink_busy_scb(host, scb); 1025 scb->hastat = HOST_BAD_PHAS; 1026 scb->tastat = 0; 1027 initio_append_done_scb(host, scb); 1028 } 1029 initio_stop_bm(host); 1030 initio_reset_scsi(host, 8); /* 7/29/98 */ 1031 return initio_post_scsi_rst(host); 1032 } 1033 1034 1035 /************************************************************************/ 1036 static void initio_exec_scb(struct initio_host * host, struct scsi_ctrl_blk * scb) 1037 { 1038 unsigned long flags; 1039 1040 scb->mode = 0; 1041 1042 scb->sgidx = 0; 1043 scb->sgmax = scb->sglen; 1044 1045 spin_lock_irqsave(&host->semaph_lock, flags); 1046 1047 initio_append_pend_scb(host, scb); /* Append this SCB to Pending queue */ 1048 1049 /* VVVVV 07/21/98 */ 1050 if (host->semaph == 1) { 1051 /* Disable Jasmin SCSI Int */ 1052 outb(0x1F, host->addr + TUL_Mask); 1053 host->semaph = 0; 1054 spin_unlock_irqrestore(&host->semaph_lock, flags); 1055 1056 tulip_main(host); 1057 1058 spin_lock_irqsave(&host->semaph_lock, flags); 1059 host->semaph = 1; 1060 outb(0x0F, host->addr + TUL_Mask); 1061 } 1062 spin_unlock_irqrestore(&host->semaph_lock, flags); 1063 return; 1064 } 1065 1066 /***************************************************************************/ 1067 static int initio_isr(struct initio_host * host) 1068 { 1069 if (inb(host->addr + TUL_Int) & TSS_INT_PENDING) { 1070 if (host->semaph == 1) { 1071 outb(0x1F, host->addr + TUL_Mask); 1072 /* Disable Tulip SCSI Int */ 1073 host->semaph = 0; 1074 1075 tulip_main(host); 1076 1077 host->semaph = 1; 1078 outb(0x0F, host->addr + TUL_Mask); 1079 return 1; 1080 } 1081 } 1082 return 0; 1083 } 1084 1085 static int tulip_main(struct initio_host * host) 1086 { 1087 struct scsi_ctrl_blk *scb; 1088 1089 for (;;) { 1090 tulip_scsi(host); /* Call tulip_scsi */ 1091 1092 /* Walk the list of completed SCBs */ 1093 while ((scb = initio_find_done_scb(host)) != NULL) { /* find done entry */ 1094 if (scb->tastat == INI_QUEUE_FULL) { 1095 host->max_tags[scb->target] = 1096 host->act_tags[scb->target] - 1; 1097 scb->tastat = 0; 1098 initio_append_pend_scb(host, scb); 1099 continue; 1100 } 1101 if (!(scb->mode & SCM_RSENS)) { /* not in auto req. sense mode */ 1102 if (scb->tastat == 2) { 1103 1104 /* clr sync. nego flag */ 1105 1106 if (scb->flags & SCF_SENSE) { 1107 u8 len; 1108 len = scb->senselen; 1109 if (len == 0) 1110 len = 1; 1111 scb->buflen = scb->senselen; 1112 scb->bufptr = scb->senseptr; 1113 scb->flags &= ~(SCF_SG | SCF_DIR); /* for xfer_data_in */ 1114 /* so, we won't report wrong direction in xfer_data_in, 1115 and won't report HOST_DO_DU in state_6 */ 1116 scb->mode = SCM_RSENS; 1117 scb->ident &= 0xBF; /* Disable Disconnect */ 1118 scb->tagmsg = 0; 1119 scb->tastat = 0; 1120 scb->cdblen = 6; 1121 scb->cdb[0] = SCSICMD_RequestSense; 1122 scb->cdb[1] = 0; 1123 scb->cdb[2] = 0; 1124 scb->cdb[3] = 0; 1125 scb->cdb[4] = len; 1126 scb->cdb[5] = 0; 1127 initio_push_pend_scb(host, scb); 1128 break; 1129 } 1130 } 1131 } else { /* in request sense mode */ 1132 1133 if (scb->tastat == 2) { /* check contition status again after sending 1134 requset sense cmd 0x3 */ 1135 scb->hastat = HOST_BAD_PHAS; 1136 } 1137 scb->tastat = 2; 1138 } 1139 scb->flags |= SCF_DONE; 1140 if (scb->flags & SCF_POST) { 1141 /* FIXME: only one post method and lose casts */ 1142 (*scb->post) ((u8 *) host, (u8 *) scb); 1143 } 1144 } /* while */ 1145 /* find_active: */ 1146 if (inb(host->addr + TUL_SStatus0) & TSS_INT_PENDING) 1147 continue; 1148 if (host->active) /* return to OS and wait for xfer_done_ISR/Selected_ISR */ 1149 return 1; /* return to OS, enable interrupt */ 1150 /* Check pending SCB */ 1151 if (initio_find_first_pend_scb(host) == NULL) 1152 return 1; /* return to OS, enable interrupt */ 1153 } /* End of for loop */ 1154 /* statement won't reach here */ 1155 } 1156 1157 static void tulip_scsi(struct initio_host * host) 1158 { 1159 struct scsi_ctrl_blk *scb; 1160 struct target_control *active_tc; 1161 1162 /* make sure to service interrupt asap */ 1163 if ((host->jsstatus0 = inb(host->addr + TUL_SStatus0)) & TSS_INT_PENDING) { 1164 host->phase = host->jsstatus0 & TSS_PH_MASK; 1165 host->jsstatus1 = inb(host->addr + TUL_SStatus1); 1166 host->jsint = inb(host->addr + TUL_SInt); 1167 if (host->jsint & TSS_SCSIRST_INT) { /* SCSI bus reset detected */ 1168 int_initio_scsi_rst(host); 1169 return; 1170 } 1171 if (host->jsint & TSS_RESEL_INT) { /* if selected/reselected interrupt */ 1172 if (int_initio_resel(host) == 0) 1173 initio_next_state(host); 1174 return; 1175 } 1176 if (host->jsint & TSS_SEL_TIMEOUT) { 1177 int_initio_busfree(host); 1178 return; 1179 } 1180 if (host->jsint & TSS_DISC_INT) { /* BUS disconnection */ 1181 int_initio_busfree(host); /* unexpected bus free or sel timeout */ 1182 return; 1183 } 1184 if (host->jsint & (TSS_FUNC_COMP | TSS_BUS_SERV)) { /* func complete or Bus service */ 1185 if ((scb = host->active) != NULL) 1186 initio_next_state(host); 1187 return; 1188 } 1189 } 1190 if (host->active != NULL) 1191 return; 1192 1193 if ((scb = initio_find_first_pend_scb(host)) == NULL) 1194 return; 1195 1196 /* program HBA's SCSI ID & target SCSI ID */ 1197 outb((host->scsi_id << 4) | (scb->target & 0x0F), 1198 host->addr + TUL_SScsiId); 1199 if (scb->opcode == ExecSCSI) { 1200 active_tc = &host->targets[scb->target]; 1201 1202 if (scb->tagmsg) 1203 active_tc->drv_flags |= TCF_DRV_EN_TAG; 1204 else 1205 active_tc->drv_flags &= ~TCF_DRV_EN_TAG; 1206 1207 outb(active_tc->js_period, host->addr + TUL_SPeriod); 1208 if ((active_tc->flags & (TCF_WDTR_DONE | TCF_NO_WDTR)) == 0) { /* do wdtr negotiation */ 1209 initio_select_atn_stop(host, scb); 1210 } else { 1211 if ((active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0) { /* do sync negotiation */ 1212 initio_select_atn_stop(host, scb); 1213 } else { 1214 if (scb->tagmsg) 1215 initio_select_atn3(host, scb); 1216 else 1217 initio_select_atn(host, scb); 1218 } 1219 } 1220 if (scb->flags & SCF_POLL) { 1221 while (wait_tulip(host) != -1) { 1222 if (initio_next_state(host) == -1) 1223 break; 1224 } 1225 } 1226 } else if (scb->opcode == BusDevRst) { 1227 initio_select_atn_stop(host, scb); 1228 scb->next_state = 8; 1229 if (scb->flags & SCF_POLL) { 1230 while (wait_tulip(host) != -1) { 1231 if (initio_next_state(host) == -1) 1232 break; 1233 } 1234 } 1235 } else if (scb->opcode == AbortCmd) { 1236 if (initio_abort_srb(host, scb->srb) != 0) { 1237 initio_unlink_pend_scb(host, scb); 1238 initio_release_scb(host, scb); 1239 } else { 1240 scb->opcode = BusDevRst; 1241 initio_select_atn_stop(host, scb); 1242 scb->next_state = 8; 1243 } 1244 } else { 1245 initio_unlink_pend_scb(host, scb); 1246 scb->hastat = 0x16; /* bad command */ 1247 initio_append_done_scb(host, scb); 1248 } 1249 return; 1250 } 1251 1252 /** 1253 * initio_next_state - Next SCSI state 1254 * @host: InitIO host we are processing 1255 * 1256 * Progress the active command block along the state machine 1257 * until we hit a state which we must wait for activity to occur. 1258 * 1259 * Returns zero or a negative code. 1260 */ 1261 1262 static int initio_next_state(struct initio_host * host) 1263 { 1264 int next; 1265 1266 next = host->active->next_state; 1267 for (;;) { 1268 switch (next) { 1269 case 1: 1270 next = initio_state_1(host); 1271 break; 1272 case 2: 1273 next = initio_state_2(host); 1274 break; 1275 case 3: 1276 next = initio_state_3(host); 1277 break; 1278 case 4: 1279 next = initio_state_4(host); 1280 break; 1281 case 5: 1282 next = initio_state_5(host); 1283 break; 1284 case 6: 1285 next = initio_state_6(host); 1286 break; 1287 case 7: 1288 next = initio_state_7(host); 1289 break; 1290 case 8: 1291 return initio_bus_device_reset(host); 1292 default: 1293 return initio_bad_seq(host); 1294 } 1295 if (next <= 0) 1296 return next; 1297 } 1298 } 1299 1300 1301 /** 1302 * initio_state_1 - SCSI state machine 1303 * @host: InitIO host we are controlling 1304 * 1305 * Perform SCSI state processing for Select/Attention/Stop 1306 */ 1307 1308 static int initio_state_1(struct initio_host * host) 1309 { 1310 struct scsi_ctrl_blk *scb = host->active; 1311 struct target_control *active_tc = host->active_tc; 1312 #if DEBUG_STATE 1313 printk("-s1-"); 1314 #endif 1315 1316 /* Move the SCB from pending to busy */ 1317 initio_unlink_pend_scb(host, scb); 1318 initio_append_busy_scb(host, scb); 1319 1320 outb(active_tc->sconfig0, host->addr + TUL_SConfig ); 1321 /* ATN on */ 1322 if (host->phase == MSG_OUT) { 1323 outb(TSC_EN_BUS_IN | TSC_HW_RESELECT, host->addr + TUL_SCtrl1); 1324 outb(scb->ident, host->addr + TUL_SFifo); 1325 1326 if (scb->tagmsg) { 1327 outb(scb->tagmsg, host->addr + TUL_SFifo); 1328 outb(scb->tagid, host->addr + TUL_SFifo); 1329 } 1330 if ((active_tc->flags & (TCF_WDTR_DONE | TCF_NO_WDTR)) == 0) { 1331 active_tc->flags |= TCF_WDTR_DONE; 1332 outb(MSG_EXTEND, host->addr + TUL_SFifo); 1333 outb(2, host->addr + TUL_SFifo); /* Extended msg length */ 1334 outb(3, host->addr + TUL_SFifo); /* Sync request */ 1335 outb(1, host->addr + TUL_SFifo); /* Start from 16 bits */ 1336 } else if ((active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0) { 1337 active_tc->flags |= TCF_SYNC_DONE; 1338 outb(MSG_EXTEND, host->addr + TUL_SFifo); 1339 outb(3, host->addr + TUL_SFifo); /* extended msg length */ 1340 outb(1, host->addr + TUL_SFifo); /* sync request */ 1341 outb(initio_rate_tbl[active_tc->flags & TCF_SCSI_RATE], host->addr + TUL_SFifo); 1342 outb(MAX_OFFSET, host->addr + TUL_SFifo); /* REQ/ACK offset */ 1343 } 1344 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); 1345 if (wait_tulip(host) == -1) 1346 return -1; 1347 } 1348 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); 1349 outb((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)), host->addr + TUL_SSignal); 1350 /* Into before CDB xfer */ 1351 return 3; 1352 } 1353 1354 1355 /** 1356 * initio_state_2 - SCSI state machine 1357 * @host: InitIO host we are controlling 1358 * 1359 * state after selection with attention 1360 * state after selection with attention3 1361 */ 1362 1363 static int initio_state_2(struct initio_host * host) 1364 { 1365 struct scsi_ctrl_blk *scb = host->active; 1366 struct target_control *active_tc = host->active_tc; 1367 #if DEBUG_STATE 1368 printk("-s2-"); 1369 #endif 1370 1371 initio_unlink_pend_scb(host, scb); 1372 initio_append_busy_scb(host, scb); 1373 1374 outb(active_tc->sconfig0, host->addr + TUL_SConfig); 1375 1376 if (host->jsstatus1 & TSS_CMD_PH_CMP) 1377 return 4; 1378 1379 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); 1380 outb((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)), host->addr + TUL_SSignal); 1381 /* Into before CDB xfer */ 1382 return 3; 1383 } 1384 1385 /** 1386 * initio_state_3 - SCSI state machine 1387 * @host: InitIO host we are controlling 1388 * 1389 * state before CDB xfer is done 1390 */ 1391 1392 static int initio_state_3(struct initio_host * host) 1393 { 1394 struct scsi_ctrl_blk *scb = host->active; 1395 struct target_control *active_tc = host->active_tc; 1396 int i; 1397 1398 #if DEBUG_STATE 1399 printk("-s3-"); 1400 #endif 1401 for (;;) { 1402 switch (host->phase) { 1403 case CMD_OUT: /* Command out phase */ 1404 for (i = 0; i < (int) scb->cdblen; i++) 1405 outb(scb->cdb[i], host->addr + TUL_SFifo); 1406 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); 1407 if (wait_tulip(host) == -1) 1408 return -1; 1409 if (host->phase == CMD_OUT) 1410 return initio_bad_seq(host); 1411 return 4; 1412 1413 case MSG_IN: /* Message in phase */ 1414 scb->next_state = 3; 1415 if (initio_msgin(host) == -1) 1416 return -1; 1417 break; 1418 1419 case STATUS_IN: /* Status phase */ 1420 if (initio_status_msg(host) == -1) 1421 return -1; 1422 break; 1423 1424 case MSG_OUT: /* Message out phase */ 1425 if (active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) { 1426 outb(MSG_NOP, host->addr + TUL_SFifo); /* msg nop */ 1427 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); 1428 if (wait_tulip(host) == -1) 1429 return -1; 1430 } else { 1431 active_tc->flags |= TCF_SYNC_DONE; 1432 1433 outb(MSG_EXTEND, host->addr + TUL_SFifo); 1434 outb(3, host->addr + TUL_SFifo); /* ext. msg len */ 1435 outb(1, host->addr + TUL_SFifo); /* sync request */ 1436 outb(initio_rate_tbl[active_tc->flags & TCF_SCSI_RATE], host->addr + TUL_SFifo); 1437 outb(MAX_OFFSET, host->addr + TUL_SFifo); /* REQ/ACK offset */ 1438 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); 1439 if (wait_tulip(host) == -1) 1440 return -1; 1441 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); 1442 outb(inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7), host->addr + TUL_SSignal); 1443 1444 } 1445 break; 1446 default: 1447 return initio_bad_seq(host); 1448 } 1449 } 1450 } 1451 1452 /** 1453 * initio_state_4 - SCSI state machine 1454 * @host: InitIO host we are controlling 1455 * 1456 * SCSI state machine. State 4 1457 */ 1458 1459 static int initio_state_4(struct initio_host * host) 1460 { 1461 struct scsi_ctrl_blk *scb = host->active; 1462 1463 #if DEBUG_STATE 1464 printk("-s4-"); 1465 #endif 1466 if ((scb->flags & SCF_DIR) == SCF_NO_XF) { 1467 return 6; /* Go to state 6 (After data) */ 1468 } 1469 for (;;) { 1470 if (scb->buflen == 0) 1471 return 6; 1472 1473 switch (host->phase) { 1474 1475 case STATUS_IN: /* Status phase */ 1476 if ((scb->flags & SCF_DIR) != 0) /* if direction bit set then report data underrun */ 1477 scb->hastat = HOST_DO_DU; 1478 if ((initio_status_msg(host)) == -1) 1479 return -1; 1480 break; 1481 1482 case MSG_IN: /* Message in phase */ 1483 scb->next_state = 0x4; 1484 if (initio_msgin(host) == -1) 1485 return -1; 1486 break; 1487 1488 case MSG_OUT: /* Message out phase */ 1489 if (host->jsstatus0 & TSS_PAR_ERROR) { 1490 scb->buflen = 0; 1491 scb->hastat = HOST_DO_DU; 1492 if (initio_msgout_ide(host) == -1) 1493 return -1; 1494 return 6; 1495 } else { 1496 outb(MSG_NOP, host->addr + TUL_SFifo); /* msg nop */ 1497 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); 1498 if (wait_tulip(host) == -1) 1499 return -1; 1500 } 1501 break; 1502 1503 case DATA_IN: /* Data in phase */ 1504 return initio_xfer_data_in(host); 1505 1506 case DATA_OUT: /* Data out phase */ 1507 return initio_xfer_data_out(host); 1508 1509 default: 1510 return initio_bad_seq(host); 1511 } 1512 } 1513 } 1514 1515 1516 /** 1517 * initio_state_5 - SCSI state machine 1518 * @host: InitIO host we are controlling 1519 * 1520 * State after dma xfer done or phase change before xfer done 1521 */ 1522 1523 static int initio_state_5(struct initio_host * host) 1524 { 1525 struct scsi_ctrl_blk *scb = host->active; 1526 long cnt, xcnt; /* cannot use unsigned !! code: if (xcnt < 0) */ 1527 1528 #if DEBUG_STATE 1529 printk("-s5-"); 1530 #endif 1531 /*------ get remaining count -------*/ 1532 cnt = inl(host->addr + TUL_SCnt0) & 0x0FFFFFF; 1533 1534 if (inb(host->addr + TUL_XCmd) & 0x20) { 1535 /* ----------------------- DATA_IN ----------------------------- */ 1536 /* check scsi parity error */ 1537 if (host->jsstatus0 & TSS_PAR_ERROR) 1538 scb->hastat = HOST_DO_DU; 1539 if (inb(host->addr + TUL_XStatus) & XPEND) { /* DMA xfer pending, Send STOP */ 1540 /* tell Hardware scsi xfer has been terminated */ 1541 outb(inb(host->addr + TUL_XCtrl) | 0x80, host->addr + TUL_XCtrl); 1542 /* wait until DMA xfer not pending */ 1543 while (inb(host->addr + TUL_XStatus) & XPEND) 1544 cpu_relax(); 1545 } 1546 } else { 1547 /*-------- DATA OUT -----------*/ 1548 if ((inb(host->addr + TUL_SStatus1) & TSS_XFER_CMP) == 0) { 1549 if (host->active_tc->js_period & TSC_WIDE_SCSI) 1550 cnt += (inb(host->addr + TUL_SFifoCnt) & 0x1F) << 1; 1551 else 1552 cnt += (inb(host->addr + TUL_SFifoCnt) & 0x1F); 1553 } 1554 if (inb(host->addr + TUL_XStatus) & XPEND) { /* if DMA xfer is pending, abort DMA xfer */ 1555 outb(TAX_X_ABT, host->addr + TUL_XCmd); 1556 /* wait Abort DMA xfer done */ 1557 while ((inb(host->addr + TUL_Int) & XABT) == 0) 1558 cpu_relax(); 1559 } 1560 if ((cnt == 1) && (host->phase == DATA_OUT)) { 1561 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); 1562 if (wait_tulip(host) == -1) 1563 return -1; 1564 cnt = 0; 1565 } else { 1566 if ((inb(host->addr + TUL_SStatus1) & TSS_XFER_CMP) == 0) 1567 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); 1568 } 1569 } 1570 if (cnt == 0) { 1571 scb->buflen = 0; 1572 return 6; /* After Data */ 1573 } 1574 /* Update active data pointer */ 1575 xcnt = (long) scb->buflen - cnt; /* xcnt== bytes already xferred */ 1576 scb->buflen = (u32) cnt; /* cnt == bytes left to be xferred */ 1577 if (scb->flags & SCF_SG) { 1578 struct sg_entry *sgp; 1579 unsigned long i; 1580 1581 sgp = &scb->sglist[scb->sgidx]; 1582 for (i = scb->sgidx; i < scb->sgmax; sgp++, i++) { 1583 xcnt -= (long) sgp->len; 1584 if (xcnt < 0) { /* this sgp xfer half done */ 1585 xcnt += (long) sgp->len; /* xcnt == bytes xferred in this sgp */ 1586 sgp->data += (u32) xcnt; /* new ptr to be xfer */ 1587 sgp->len -= (u32) xcnt; /* new len to be xfer */ 1588 scb->bufptr += ((u32) (i - scb->sgidx) << 3); 1589 /* new SG table ptr */ 1590 scb->sglen = (u8) (scb->sgmax - i); 1591 /* new SG table len */ 1592 scb->sgidx = (u16) i; 1593 /* for next disc and come in this loop */ 1594 return 4; /* Go to state 4 */ 1595 } 1596 /* else (xcnt >= 0 , i.e. this sgp already xferred */ 1597 } /* for */ 1598 return 6; /* Go to state 6 */ 1599 } else { 1600 scb->bufptr += (u32) xcnt; 1601 } 1602 return 4; /* Go to state 4 */ 1603 } 1604 1605 /** 1606 * initio_state_6 - SCSI state machine 1607 * @host: InitIO host we are controlling 1608 * 1609 * State after Data phase 1610 */ 1611 1612 static int initio_state_6(struct initio_host * host) 1613 { 1614 struct scsi_ctrl_blk *scb = host->active; 1615 1616 #if DEBUG_STATE 1617 printk("-s6-"); 1618 #endif 1619 for (;;) { 1620 switch (host->phase) { 1621 case STATUS_IN: /* Status phase */ 1622 if ((initio_status_msg(host)) == -1) 1623 return -1; 1624 break; 1625 1626 case MSG_IN: /* Message in phase */ 1627 scb->next_state = 6; 1628 if ((initio_msgin(host)) == -1) 1629 return -1; 1630 break; 1631 1632 case MSG_OUT: /* Message out phase */ 1633 outb(MSG_NOP, host->addr + TUL_SFifo); /* msg nop */ 1634 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); 1635 if (wait_tulip(host) == -1) 1636 return -1; 1637 break; 1638 1639 case DATA_IN: /* Data in phase */ 1640 return initio_xpad_in(host); 1641 1642 case DATA_OUT: /* Data out phase */ 1643 return initio_xpad_out(host); 1644 1645 default: 1646 return initio_bad_seq(host); 1647 } 1648 } 1649 } 1650 1651 /** 1652 * initio_state_7 - SCSI state machine 1653 * @host: InitIO host we are controlling 1654 * 1655 */ 1656 1657 int initio_state_7(struct initio_host * host) 1658 { 1659 int cnt, i; 1660 1661 #if DEBUG_STATE 1662 printk("-s7-"); 1663 #endif 1664 /* flush SCSI FIFO */ 1665 cnt = inb(host->addr + TUL_SFifoCnt) & 0x1F; 1666 if (cnt) { 1667 for (i = 0; i < cnt; i++) 1668 inb(host->addr + TUL_SFifo); 1669 } 1670 switch (host->phase) { 1671 case DATA_IN: /* Data in phase */ 1672 case DATA_OUT: /* Data out phase */ 1673 return initio_bad_seq(host); 1674 default: 1675 return 6; /* Go to state 6 */ 1676 } 1677 } 1678 1679 /** 1680 * initio_xfer_data_in - Commence data input 1681 * @host: InitIO host in use 1682 * 1683 * Commence a block of data transfer. The transfer itself will 1684 * be managed by the controller and we will get a completion (or 1685 * failure) interrupt. 1686 */ 1687 static int initio_xfer_data_in(struct initio_host * host) 1688 { 1689 struct scsi_ctrl_blk *scb = host->active; 1690 1691 if ((scb->flags & SCF_DIR) == SCF_DOUT) 1692 return 6; /* wrong direction */ 1693 1694 outl(scb->buflen, host->addr + TUL_SCnt0); 1695 outb(TSC_XF_DMA_IN, host->addr + TUL_SCmd); /* 7/25/95 */ 1696 1697 if (scb->flags & SCF_SG) { /* S/G xfer */ 1698 outl(((u32) scb->sglen) << 3, host->addr + TUL_XCntH); 1699 outl(scb->bufptr, host->addr + TUL_XAddH); 1700 outb(TAX_SG_IN, host->addr + TUL_XCmd); 1701 } else { 1702 outl(scb->buflen, host->addr + TUL_XCntH); 1703 outl(scb->bufptr, host->addr + TUL_XAddH); 1704 outb(TAX_X_IN, host->addr + TUL_XCmd); 1705 } 1706 scb->next_state = 0x5; 1707 return 0; /* return to OS, wait xfer done , let jas_isr come in */ 1708 } 1709 1710 /** 1711 * initio_xfer_data_out - Commence data output 1712 * @host: InitIO host in use 1713 * 1714 * Commence a block of data transfer. The transfer itself will 1715 * be managed by the controller and we will get a completion (or 1716 * failure) interrupt. 1717 */ 1718 1719 static int initio_xfer_data_out(struct initio_host * host) 1720 { 1721 struct scsi_ctrl_blk *scb = host->active; 1722 1723 if ((scb->flags & SCF_DIR) == SCF_DIN) 1724 return 6; /* wrong direction */ 1725 1726 outl(scb->buflen, host->addr + TUL_SCnt0); 1727 outb(TSC_XF_DMA_OUT, host->addr + TUL_SCmd); 1728 1729 if (scb->flags & SCF_SG) { /* S/G xfer */ 1730 outl(((u32) scb->sglen) << 3, host->addr + TUL_XCntH); 1731 outl(scb->bufptr, host->addr + TUL_XAddH); 1732 outb(TAX_SG_OUT, host->addr + TUL_XCmd); 1733 } else { 1734 outl(scb->buflen, host->addr + TUL_XCntH); 1735 outl(scb->bufptr, host->addr + TUL_XAddH); 1736 outb(TAX_X_OUT, host->addr + TUL_XCmd); 1737 } 1738 1739 scb->next_state = 0x5; 1740 return 0; /* return to OS, wait xfer done , let jas_isr come in */ 1741 } 1742 1743 int initio_xpad_in(struct initio_host * host) 1744 { 1745 struct scsi_ctrl_blk *scb = host->active; 1746 struct target_control *active_tc = host->active_tc; 1747 1748 if ((scb->flags & SCF_DIR) != SCF_NO_DCHK) 1749 scb->hastat = HOST_DO_DU; /* over run */ 1750 for (;;) { 1751 if (active_tc->js_period & TSC_WIDE_SCSI) 1752 outl(2, host->addr + TUL_SCnt0); 1753 else 1754 outl(1, host->addr + TUL_SCnt0); 1755 1756 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd); 1757 if (wait_tulip(host) == -1) 1758 return -1; 1759 if (host->phase != DATA_IN) { 1760 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); 1761 return 6; 1762 } 1763 inb(host->addr + TUL_SFifo); 1764 } 1765 } 1766 1767 int initio_xpad_out(struct initio_host * host) 1768 { 1769 struct scsi_ctrl_blk *scb = host->active; 1770 struct target_control *active_tc = host->active_tc; 1771 1772 if ((scb->flags & SCF_DIR) != SCF_NO_DCHK) 1773 scb->hastat = HOST_DO_DU; /* over run */ 1774 for (;;) { 1775 if (active_tc->js_period & TSC_WIDE_SCSI) 1776 outl(2, host->addr + TUL_SCnt0); 1777 else 1778 outl(1, host->addr + TUL_SCnt0); 1779 1780 outb(0, host->addr + TUL_SFifo); 1781 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); 1782 if ((wait_tulip(host)) == -1) 1783 return -1; 1784 if (host->phase != DATA_OUT) { /* Disable wide CPU to allow read 16 bits */ 1785 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); 1786 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); 1787 return 6; 1788 } 1789 } 1790 } 1791 1792 int initio_status_msg(struct initio_host * host) 1793 { /* status & MSG_IN */ 1794 struct scsi_ctrl_blk *scb = host->active; 1795 u8 msg; 1796 1797 outb(TSC_CMD_COMP, host->addr + TUL_SCmd); 1798 if (wait_tulip(host) == -1) 1799 return -1; 1800 1801 /* get status */ 1802 scb->tastat = inb(host->addr + TUL_SFifo); 1803 1804 if (host->phase == MSG_OUT) { 1805 if (host->jsstatus0 & TSS_PAR_ERROR) 1806 outb(MSG_PARITY, host->addr + TUL_SFifo); 1807 else 1808 outb(MSG_NOP, host->addr + TUL_SFifo); 1809 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); 1810 return wait_tulip(host); 1811 } 1812 if (host->phase == MSG_IN) { 1813 msg = inb(host->addr + TUL_SFifo); 1814 if (host->jsstatus0 & TSS_PAR_ERROR) { /* Parity error */ 1815 if ((initio_msgin_accept(host)) == -1) 1816 return -1; 1817 if (host->phase != MSG_OUT) 1818 return initio_bad_seq(host); 1819 outb(MSG_PARITY, host->addr + TUL_SFifo); 1820 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); 1821 return wait_tulip(host); 1822 } 1823 if (msg == 0) { /* Command complete */ 1824 1825 if ((scb->tastat & 0x18) == 0x10) /* No link support */ 1826 return initio_bad_seq(host); 1827 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); 1828 outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd); 1829 return initio_wait_done_disc(host); 1830 1831 } 1832 if (msg == MSG_LINK_COMP || msg == MSG_LINK_FLAG) { 1833 if ((scb->tastat & 0x18) == 0x10) 1834 return initio_msgin_accept(host); 1835 } 1836 } 1837 return initio_bad_seq(host); 1838 } 1839 1840 1841 /* scsi bus free */ 1842 int int_initio_busfree(struct initio_host * host) 1843 { 1844 struct scsi_ctrl_blk *scb = host->active; 1845 1846 if (scb != NULL) { 1847 if (scb->status & SCB_SELECT) { /* selection timeout */ 1848 initio_unlink_pend_scb(host, scb); 1849 scb->hastat = HOST_SEL_TOUT; 1850 initio_append_done_scb(host, scb); 1851 } else { /* Unexpected bus free */ 1852 initio_unlink_busy_scb(host, scb); 1853 scb->hastat = HOST_BUS_FREE; 1854 initio_append_done_scb(host, scb); 1855 } 1856 host->active = NULL; 1857 host->active_tc = NULL; 1858 } 1859 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */ 1860 outb(TSC_INITDEFAULT, host->addr + TUL_SConfig); 1861 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */ 1862 return -1; 1863 } 1864 1865 1866 /** 1867 * int_initio_scsi_rst - SCSI reset occurred 1868 * @host: Host seeing the reset 1869 * 1870 * A SCSI bus reset has occurred. Clean up any pending transfer 1871 * the hardware is doing by DMA and then abort all active and 1872 * disconnected commands. The mid layer should sort the rest out 1873 * for us 1874 */ 1875 1876 static int int_initio_scsi_rst(struct initio_host * host) 1877 { 1878 struct scsi_ctrl_blk *scb; 1879 int i; 1880 1881 /* if DMA xfer is pending, abort DMA xfer */ 1882 if (inb(host->addr + TUL_XStatus) & 0x01) { 1883 outb(TAX_X_ABT | TAX_X_CLR_FIFO, host->addr + TUL_XCmd); 1884 /* wait Abort DMA xfer done */ 1885 while ((inb(host->addr + TUL_Int) & 0x04) == 0) 1886 cpu_relax(); 1887 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); 1888 } 1889 /* Abort all active & disconnected scb */ 1890 while ((scb = initio_pop_busy_scb(host)) != NULL) { 1891 scb->hastat = HOST_BAD_PHAS; 1892 initio_append_done_scb(host, scb); 1893 } 1894 host->active = NULL; 1895 host->active_tc = NULL; 1896 1897 /* clr sync nego. done flag */ 1898 for (i = 0; i < host->max_tar; i++) 1899 host->targets[i].flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE); 1900 return -1; 1901 } 1902 1903 /** 1904 * int_initio_scsi_resel - Reselection occurred 1905 * @host: InitIO host adapter 1906 * 1907 * A SCSI reselection event has been signalled and the interrupt 1908 * is now being processed. Work out which command block needs attention 1909 * and continue processing that command. 1910 */ 1911 1912 int int_initio_resel(struct initio_host * host) 1913 { 1914 struct scsi_ctrl_blk *scb; 1915 struct target_control *active_tc; 1916 u8 tag, msg = 0; 1917 u8 tar, lun; 1918 1919 if ((scb = host->active) != NULL) { 1920 /* FIXME: Why check and not just clear ? */ 1921 if (scb->status & SCB_SELECT) /* if waiting for selection complete */ 1922 scb->status &= ~SCB_SELECT; 1923 host->active = NULL; 1924 } 1925 /* --------- get target id---------------------- */ 1926 tar = inb(host->addr + TUL_SBusId); 1927 /* ------ get LUN from Identify message----------- */ 1928 lun = inb(host->addr + TUL_SIdent) & 0x0F; 1929 /* 07/22/98 from 0x1F -> 0x0F */ 1930 active_tc = &host->targets[tar]; 1931 host->active_tc = active_tc; 1932 outb(active_tc->sconfig0, host->addr + TUL_SConfig); 1933 outb(active_tc->js_period, host->addr + TUL_SPeriod); 1934 1935 /* ------------- tag queueing ? ------------------- */ 1936 if (active_tc->drv_flags & TCF_DRV_EN_TAG) { 1937 if ((initio_msgin_accept(host)) == -1) 1938 return -1; 1939 if (host->phase != MSG_IN) 1940 goto no_tag; 1941 outl(1, host->addr + TUL_SCnt0); 1942 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd); 1943 if (wait_tulip(host) == -1) 1944 return -1; 1945 msg = inb(host->addr + TUL_SFifo); /* Read Tag Message */ 1946 1947 if (msg < MSG_STAG || msg > MSG_OTAG) /* Is simple Tag */ 1948 goto no_tag; 1949 1950 if (initio_msgin_accept(host) == -1) 1951 return -1; 1952 1953 if (host->phase != MSG_IN) 1954 goto no_tag; 1955 1956 outl(1, host->addr + TUL_SCnt0); 1957 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd); 1958 if (wait_tulip(host) == -1) 1959 return -1; 1960 tag = inb(host->addr + TUL_SFifo); /* Read Tag ID */ 1961 scb = host->scb + tag; 1962 if (scb->target != tar || scb->lun != lun) { 1963 return initio_msgout_abort_tag(host); 1964 } 1965 if (scb->status != SCB_BUSY) { /* 03/24/95 */ 1966 return initio_msgout_abort_tag(host); 1967 } 1968 host->active = scb; 1969 if ((initio_msgin_accept(host)) == -1) 1970 return -1; 1971 } else { /* No tag */ 1972 no_tag: 1973 if ((scb = initio_find_busy_scb(host, tar | (lun << 8))) == NULL) { 1974 return initio_msgout_abort_targ(host); 1975 } 1976 host->active = scb; 1977 if (!(active_tc->drv_flags & TCF_DRV_EN_TAG)) { 1978 if ((initio_msgin_accept(host)) == -1) 1979 return -1; 1980 } 1981 } 1982 return 0; 1983 } 1984 1985 /** 1986 * int_initio_bad_seq - out of phase 1987 * @host: InitIO host flagging event 1988 * 1989 * We have ended up out of phase somehow. Reset the host controller 1990 * and throw all our toys out of the pram. Let the midlayer clean up 1991 */ 1992 1993 static int int_initio_bad_seq(struct initio_host * host) 1994 { /* target wrong phase */ 1995 struct scsi_ctrl_blk *scb; 1996 int i; 1997 1998 initio_reset_scsi(host, 10); 1999 2000 while ((scb = initio_pop_busy_scb(host)) != NULL) { 2001 scb->hastat = HOST_BAD_PHAS; 2002 initio_append_done_scb(host, scb); 2003 } 2004 for (i = 0; i < host->max_tar; i++) 2005 host->targets[i].flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE); 2006 return -1; 2007 } 2008 2009 2010 /** 2011 * initio_msgout_abort_targ - abort a tag 2012 * @host: InitIO host 2013 * 2014 * Abort when the target/lun does not match or when our SCB is not 2015 * busy. Used by untagged commands. 2016 */ 2017 2018 static int initio_msgout_abort_targ(struct initio_host * host) 2019 { 2020 2021 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal); 2022 if (initio_msgin_accept(host) == -1) 2023 return -1; 2024 if (host->phase != MSG_OUT) 2025 return initio_bad_seq(host); 2026 2027 outb(MSG_ABORT, host->addr + TUL_SFifo); 2028 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); 2029 2030 return initio_wait_disc(host); 2031 } 2032 2033 /** 2034 * initio_msgout_abort_tag - abort a tag 2035 * @host: InitIO host 2036 * 2037 * Abort when the target/lun does not match or when our SCB is not 2038 * busy. Used for tagged commands. 2039 */ 2040 2041 static int initio_msgout_abort_tag(struct initio_host * host) 2042 { 2043 2044 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal); 2045 if (initio_msgin_accept(host) == -1) 2046 return -1; 2047 if (host->phase != MSG_OUT) 2048 return initio_bad_seq(host); 2049 2050 outb(MSG_ABORT_TAG, host->addr + TUL_SFifo); 2051 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); 2052 2053 return initio_wait_disc(host); 2054 2055 } 2056 2057 /** 2058 * initio_msgin - Message in 2059 * @host: InitIO Host 2060 * 2061 * Process incoming message 2062 */ 2063 static int initio_msgin(struct initio_host * host) 2064 { 2065 struct target_control *active_tc; 2066 2067 for (;;) { 2068 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); 2069 2070 outl(1, host->addr + TUL_SCnt0); 2071 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd); 2072 if (wait_tulip(host) == -1) 2073 return -1; 2074 2075 switch (inb(host->addr + TUL_SFifo)) { 2076 case MSG_DISC: /* Disconnect msg */ 2077 outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd); 2078 return initio_wait_disc(host); 2079 case MSG_SDP: 2080 case MSG_RESTORE: 2081 case MSG_NOP: 2082 initio_msgin_accept(host); 2083 break; 2084 case MSG_REJ: /* Clear ATN first */ 2085 outb((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)), 2086 host->addr + TUL_SSignal); 2087 active_tc = host->active_tc; 2088 if ((active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0) /* do sync nego */ 2089 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), 2090 host->addr + TUL_SSignal); 2091 initio_msgin_accept(host); 2092 break; 2093 case MSG_EXTEND: /* extended msg */ 2094 initio_msgin_extend(host); 2095 break; 2096 case MSG_IGNOREWIDE: 2097 initio_msgin_accept(host); 2098 break; 2099 case MSG_COMP: 2100 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); 2101 outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd); 2102 return initio_wait_done_disc(host); 2103 default: 2104 initio_msgout_reject(host); 2105 break; 2106 } 2107 if (host->phase != MSG_IN) 2108 return host->phase; 2109 } 2110 /* statement won't reach here */ 2111 } 2112 2113 static int initio_msgout_reject(struct initio_host * host) 2114 { 2115 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal); 2116 2117 if (initio_msgin_accept(host) == -1) 2118 return -1; 2119 2120 if (host->phase == MSG_OUT) { 2121 outb(MSG_REJ, host->addr + TUL_SFifo); /* Msg reject */ 2122 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); 2123 return wait_tulip(host); 2124 } 2125 return host->phase; 2126 } 2127 2128 static int initio_msgout_ide(struct initio_host * host) 2129 { 2130 outb(MSG_IDE, host->addr + TUL_SFifo); /* Initiator Detected Error */ 2131 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); 2132 return wait_tulip(host); 2133 } 2134 2135 static int initio_msgin_extend(struct initio_host * host) 2136 { 2137 u8 len, idx; 2138 2139 if (initio_msgin_accept(host) != MSG_IN) 2140 return host->phase; 2141 2142 /* Get extended msg length */ 2143 outl(1, host->addr + TUL_SCnt0); 2144 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd); 2145 if (wait_tulip(host) == -1) 2146 return -1; 2147 2148 len = inb(host->addr + TUL_SFifo); 2149 host->msg[0] = len; 2150 for (idx = 1; len != 0; len--) { 2151 2152 if ((initio_msgin_accept(host)) != MSG_IN) 2153 return host->phase; 2154 outl(1, host->addr + TUL_SCnt0); 2155 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd); 2156 if (wait_tulip(host) == -1) 2157 return -1; 2158 host->msg[idx++] = inb(host->addr + TUL_SFifo); 2159 } 2160 if (host->msg[1] == 1) { /* if it's synchronous data transfer request */ 2161 u8 r; 2162 if (host->msg[0] != 3) /* if length is not right */ 2163 return initio_msgout_reject(host); 2164 if (host->active_tc->flags & TCF_NO_SYNC_NEGO) { /* Set OFFSET=0 to do async, nego back */ 2165 host->msg[3] = 0; 2166 } else { 2167 if (initio_msgin_sync(host) == 0 && 2168 (host->active_tc->flags & TCF_SYNC_DONE)) { 2169 initio_sync_done(host); 2170 return initio_msgin_accept(host); 2171 } 2172 } 2173 2174 r = inb(host->addr + TUL_SSignal); 2175 outb((r & (TSC_SET_ACK | 7)) | TSC_SET_ATN, 2176 host->addr + TUL_SSignal); 2177 if (initio_msgin_accept(host) != MSG_OUT) 2178 return host->phase; 2179 /* sync msg out */ 2180 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); 2181 2182 initio_sync_done(host); 2183 2184 outb(MSG_EXTEND, host->addr + TUL_SFifo); 2185 outb(3, host->addr + TUL_SFifo); 2186 outb(1, host->addr + TUL_SFifo); 2187 outb(host->msg[2], host->addr + TUL_SFifo); 2188 outb(host->msg[3], host->addr + TUL_SFifo); 2189 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); 2190 return wait_tulip(host); 2191 } 2192 if (host->msg[0] != 2 || host->msg[1] != 3) 2193 return initio_msgout_reject(host); 2194 /* if it's WIDE DATA XFER REQ */ 2195 if (host->active_tc->flags & TCF_NO_WDTR) { 2196 host->msg[2] = 0; 2197 } else { 2198 if (host->msg[2] > 2) /* > 32 bits */ 2199 return initio_msgout_reject(host); 2200 if (host->msg[2] == 2) { /* == 32 */ 2201 host->msg[2] = 1; 2202 } else { 2203 if ((host->active_tc->flags & TCF_NO_WDTR) == 0) { 2204 wdtr_done(host); 2205 if ((host->active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0) 2206 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal); 2207 return initio_msgin_accept(host); 2208 } 2209 } 2210 } 2211 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal); 2212 2213 if (initio_msgin_accept(host) != MSG_OUT) 2214 return host->phase; 2215 /* WDTR msg out */ 2216 outb(MSG_EXTEND, host->addr + TUL_SFifo); 2217 outb(2, host->addr + TUL_SFifo); 2218 outb(3, host->addr + TUL_SFifo); 2219 outb(host->msg[2], host->addr + TUL_SFifo); 2220 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); 2221 return wait_tulip(host); 2222 } 2223 2224 static int initio_msgin_sync(struct initio_host * host) 2225 { 2226 char default_period; 2227 2228 default_period = initio_rate_tbl[host->active_tc->flags & TCF_SCSI_RATE]; 2229 if (host->msg[3] > MAX_OFFSET) { 2230 host->msg[3] = MAX_OFFSET; 2231 if (host->msg[2] < default_period) { 2232 host->msg[2] = default_period; 2233 return 1; 2234 } 2235 if (host->msg[2] >= 59) /* Change to async */ 2236 host->msg[3] = 0; 2237 return 1; 2238 } 2239 /* offset requests asynchronous transfers ? */ 2240 if (host->msg[3] == 0) { 2241 return 0; 2242 } 2243 if (host->msg[2] < default_period) { 2244 host->msg[2] = default_period; 2245 return 1; 2246 } 2247 if (host->msg[2] >= 59) { 2248 host->msg[3] = 0; 2249 return 1; 2250 } 2251 return 0; 2252 } 2253 2254 static int wdtr_done(struct initio_host * host) 2255 { 2256 host->active_tc->flags &= ~TCF_SYNC_DONE; 2257 host->active_tc->flags |= TCF_WDTR_DONE; 2258 2259 host->active_tc->js_period = 0; 2260 if (host->msg[2]) /* if 16 bit */ 2261 host->active_tc->js_period |= TSC_WIDE_SCSI; 2262 host->active_tc->sconfig0 &= ~TSC_ALT_PERIOD; 2263 outb(host->active_tc->sconfig0, host->addr + TUL_SConfig); 2264 outb(host->active_tc->js_period, host->addr + TUL_SPeriod); 2265 2266 return 1; 2267 } 2268 2269 static int initio_sync_done(struct initio_host * host) 2270 { 2271 int i; 2272 2273 host->active_tc->flags |= TCF_SYNC_DONE; 2274 2275 if (host->msg[3]) { 2276 host->active_tc->js_period |= host->msg[3]; 2277 for (i = 0; i < 8; i++) { 2278 if (initio_rate_tbl[i] >= host->msg[2]) /* pick the big one */ 2279 break; 2280 } 2281 host->active_tc->js_period |= (i << 4); 2282 host->active_tc->sconfig0 |= TSC_ALT_PERIOD; 2283 } 2284 outb(host->active_tc->sconfig0, host->addr + TUL_SConfig); 2285 outb(host->active_tc->js_period, host->addr + TUL_SPeriod); 2286 2287 return -1; 2288 } 2289 2290 2291 static int initio_post_scsi_rst(struct initio_host * host) 2292 { 2293 struct scsi_ctrl_blk *scb; 2294 struct target_control *active_tc; 2295 int i; 2296 2297 host->active = NULL; 2298 host->active_tc = NULL; 2299 host->flags = 0; 2300 2301 while ((scb = initio_pop_busy_scb(host)) != NULL) { 2302 scb->hastat = HOST_BAD_PHAS; 2303 initio_append_done_scb(host, scb); 2304 } 2305 /* clear sync done flag */ 2306 active_tc = &host->targets[0]; 2307 for (i = 0; i < host->max_tar; active_tc++, i++) { 2308 active_tc->flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE); 2309 /* Initialize the sync. xfer register values to an asyn xfer */ 2310 active_tc->js_period = 0; 2311 active_tc->sconfig0 = host->sconf1; 2312 host->act_tags[0] = 0; /* 07/22/98 */ 2313 host->targets[i].flags &= ~TCF_BUSY; /* 07/22/98 */ 2314 } /* for */ 2315 2316 return -1; 2317 } 2318 2319 static void initio_select_atn_stop(struct initio_host * host, struct scsi_ctrl_blk * scb) 2320 { 2321 scb->status |= SCB_SELECT; 2322 scb->next_state = 0x1; 2323 host->active = scb; 2324 host->active_tc = &host->targets[scb->target]; 2325 outb(TSC_SELATNSTOP, host->addr + TUL_SCmd); 2326 } 2327 2328 2329 static void initio_select_atn(struct initio_host * host, struct scsi_ctrl_blk * scb) 2330 { 2331 int i; 2332 2333 scb->status |= SCB_SELECT; 2334 scb->next_state = 0x2; 2335 2336 outb(scb->ident, host->addr + TUL_SFifo); 2337 for (i = 0; i < (int) scb->cdblen; i++) 2338 outb(scb->cdb[i], host->addr + TUL_SFifo); 2339 host->active_tc = &host->targets[scb->target]; 2340 host->active = scb; 2341 outb(TSC_SEL_ATN, host->addr + TUL_SCmd); 2342 } 2343 2344 static void initio_select_atn3(struct initio_host * host, struct scsi_ctrl_blk * scb) 2345 { 2346 int i; 2347 2348 scb->status |= SCB_SELECT; 2349 scb->next_state = 0x2; 2350 2351 outb(scb->ident, host->addr + TUL_SFifo); 2352 outb(scb->tagmsg, host->addr + TUL_SFifo); 2353 outb(scb->tagid, host->addr + TUL_SFifo); 2354 for (i = 0; i < scb->cdblen; i++) 2355 outb(scb->cdb[i], host->addr + TUL_SFifo); 2356 host->active_tc = &host->targets[scb->target]; 2357 host->active = scb; 2358 outb(TSC_SEL_ATN3, host->addr + TUL_SCmd); 2359 } 2360 2361 /** 2362 * initio_bus_device_reset - SCSI Bus Device Reset 2363 * @host: InitIO host to reset 2364 * 2365 * Perform a device reset and abort all pending SCBs for the 2366 * victim device 2367 */ 2368 int initio_bus_device_reset(struct initio_host * host) 2369 { 2370 struct scsi_ctrl_blk *scb = host->active; 2371 struct target_control *active_tc = host->active_tc; 2372 struct scsi_ctrl_blk *tmp, *prev; 2373 u8 tar; 2374 2375 if (host->phase != MSG_OUT) 2376 return int_initio_bad_seq(host); /* Unexpected phase */ 2377 2378 initio_unlink_pend_scb(host, scb); 2379 initio_release_scb(host, scb); 2380 2381 2382 tar = scb->target; /* target */ 2383 active_tc->flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE | TCF_BUSY); 2384 /* clr sync. nego & WDTR flags 07/22/98 */ 2385 2386 /* abort all SCB with same target */ 2387 prev = tmp = host->first_busy; /* Check Busy queue */ 2388 while (tmp != NULL) { 2389 if (tmp->target == tar) { 2390 /* unlink it */ 2391 if (tmp == host->first_busy) { 2392 if ((host->first_busy = tmp->next) == NULL) 2393 host->last_busy = NULL; 2394 } else { 2395 prev->next = tmp->next; 2396 if (tmp == host->last_busy) 2397 host->last_busy = prev; 2398 } 2399 tmp->hastat = HOST_ABORTED; 2400 initio_append_done_scb(host, tmp); 2401 } 2402 /* Previous haven't change */ 2403 else { 2404 prev = tmp; 2405 } 2406 tmp = tmp->next; 2407 } 2408 outb(MSG_DEVRST, host->addr + TUL_SFifo); 2409 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); 2410 return initio_wait_disc(host); 2411 2412 } 2413 2414 static int initio_msgin_accept(struct initio_host * host) 2415 { 2416 outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd); 2417 return wait_tulip(host); 2418 } 2419 2420 static int wait_tulip(struct initio_host * host) 2421 { 2422 2423 while (!((host->jsstatus0 = inb(host->addr + TUL_SStatus0)) 2424 & TSS_INT_PENDING)) 2425 cpu_relax(); 2426 2427 host->jsint = inb(host->addr + TUL_SInt); 2428 host->phase = host->jsstatus0 & TSS_PH_MASK; 2429 host->jsstatus1 = inb(host->addr + TUL_SStatus1); 2430 2431 if (host->jsint & TSS_RESEL_INT) /* if SCSI bus reset detected */ 2432 return int_initio_resel(host); 2433 if (host->jsint & TSS_SEL_TIMEOUT) /* if selected/reselected timeout interrupt */ 2434 return int_initio_busfree(host); 2435 if (host->jsint & TSS_SCSIRST_INT) /* if SCSI bus reset detected */ 2436 return int_initio_scsi_rst(host); 2437 2438 if (host->jsint & TSS_DISC_INT) { /* BUS disconnection */ 2439 if (host->flags & HCF_EXPECT_DONE_DISC) { 2440 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */ 2441 initio_unlink_busy_scb(host, host->active); 2442 host->active->hastat = 0; 2443 initio_append_done_scb(host, host->active); 2444 host->active = NULL; 2445 host->active_tc = NULL; 2446 host->flags &= ~HCF_EXPECT_DONE_DISC; 2447 outb(TSC_INITDEFAULT, host->addr + TUL_SConfig); 2448 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */ 2449 return -1; 2450 } 2451 if (host->flags & HCF_EXPECT_DISC) { 2452 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */ 2453 host->active = NULL; 2454 host->active_tc = NULL; 2455 host->flags &= ~HCF_EXPECT_DISC; 2456 outb(TSC_INITDEFAULT, host->addr + TUL_SConfig); 2457 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */ 2458 return -1; 2459 } 2460 return int_initio_busfree(host); 2461 } 2462 /* The old code really does the below. Can probably be removed */ 2463 if (host->jsint & (TSS_FUNC_COMP | TSS_BUS_SERV)) 2464 return host->phase; 2465 return host->phase; 2466 } 2467 2468 static int initio_wait_disc(struct initio_host * host) 2469 { 2470 while (!((host->jsstatus0 = inb(host->addr + TUL_SStatus0)) & TSS_INT_PENDING)) 2471 cpu_relax(); 2472 2473 host->jsint = inb(host->addr + TUL_SInt); 2474 2475 if (host->jsint & TSS_SCSIRST_INT) /* if SCSI bus reset detected */ 2476 return int_initio_scsi_rst(host); 2477 if (host->jsint & TSS_DISC_INT) { /* BUS disconnection */ 2478 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */ 2479 outb(TSC_INITDEFAULT, host->addr + TUL_SConfig); 2480 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */ 2481 host->active = NULL; 2482 return -1; 2483 } 2484 return initio_bad_seq(host); 2485 } 2486 2487 static int initio_wait_done_disc(struct initio_host * host) 2488 { 2489 while (!((host->jsstatus0 = inb(host->addr + TUL_SStatus0)) 2490 & TSS_INT_PENDING)) 2491 cpu_relax(); 2492 2493 host->jsint = inb(host->addr + TUL_SInt); 2494 2495 if (host->jsint & TSS_SCSIRST_INT) /* if SCSI bus reset detected */ 2496 return int_initio_scsi_rst(host); 2497 if (host->jsint & TSS_DISC_INT) { /* BUS disconnection */ 2498 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */ 2499 outb(TSC_INITDEFAULT, host->addr + TUL_SConfig); 2500 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */ 2501 initio_unlink_busy_scb(host, host->active); 2502 2503 initio_append_done_scb(host, host->active); 2504 host->active = NULL; 2505 return -1; 2506 } 2507 return initio_bad_seq(host); 2508 } 2509 2510 /** 2511 * i91u_intr - IRQ handler 2512 * @irqno: IRQ number 2513 * @dev_id: IRQ identifier 2514 * 2515 * Take the relevant locks and then invoke the actual isr processing 2516 * code under the lock. 2517 */ 2518 2519 static irqreturn_t i91u_intr(int irqno, void *dev_id) 2520 { 2521 struct Scsi_Host *dev = dev_id; 2522 unsigned long flags; 2523 int r; 2524 2525 spin_lock_irqsave(dev->host_lock, flags); 2526 r = initio_isr((struct initio_host *)dev->hostdata); 2527 spin_unlock_irqrestore(dev->host_lock, flags); 2528 if (r) 2529 return IRQ_HANDLED; 2530 else 2531 return IRQ_NONE; 2532 } 2533 2534 2535 /** 2536 * initio_build_scb - Build the mappings and SCB 2537 * @host: InitIO host taking the command 2538 * @cblk: Firmware command block 2539 * @cmnd: SCSI midlayer command block 2540 * 2541 * Translate the abstract SCSI command into a firmware command block 2542 * suitable for feeding to the InitIO host controller. This also requires 2543 * we build the scatter gather lists and ensure they are mapped properly. 2544 */ 2545 2546 static void initio_build_scb(struct initio_host * host, struct scsi_ctrl_blk * cblk, struct scsi_cmnd * cmnd) 2547 { /* Create corresponding SCB */ 2548 struct scatterlist *sglist; 2549 struct sg_entry *sg; /* Pointer to SG list */ 2550 int i, nseg; 2551 long total_len; 2552 dma_addr_t dma_addr; 2553 2554 /* Fill in the command headers */ 2555 cblk->post = i91uSCBPost; /* i91u's callback routine */ 2556 cblk->srb = cmnd; 2557 cblk->opcode = ExecSCSI; 2558 cblk->flags = SCF_POST; /* After SCSI done, call post routine */ 2559 cblk->target = cmnd->device->id; 2560 cblk->lun = cmnd->device->lun; 2561 cblk->ident = cmnd->device->lun | DISC_ALLOW; 2562 2563 cblk->flags |= SCF_SENSE; /* Turn on auto request sense */ 2564 2565 /* Map the sense buffer into bus memory */ 2566 dma_addr = dma_map_single(&host->pci_dev->dev, cmnd->sense_buffer, 2567 SENSE_SIZE, DMA_FROM_DEVICE); 2568 cblk->senseptr = (u32)dma_addr; 2569 cblk->senselen = SENSE_SIZE; 2570 cmnd->SCp.ptr = (char *)(unsigned long)dma_addr; 2571 cblk->cdblen = cmnd->cmd_len; 2572 2573 /* Clear the returned status */ 2574 cblk->hastat = 0; 2575 cblk->tastat = 0; 2576 /* Command the command */ 2577 memcpy(cblk->cdb, cmnd->cmnd, cmnd->cmd_len); 2578 2579 /* Set up tags */ 2580 if (cmnd->device->tagged_supported) { /* Tag Support */ 2581 cblk->tagmsg = SIMPLE_QUEUE_TAG; /* Do simple tag only */ 2582 } else { 2583 cblk->tagmsg = 0; /* No tag support */ 2584 } 2585 2586 /* todo handle map_sg error */ 2587 nseg = scsi_dma_map(cmnd); 2588 BUG_ON(nseg < 0); 2589 if (nseg) { 2590 dma_addr = dma_map_single(&host->pci_dev->dev, &cblk->sglist[0], 2591 sizeof(struct sg_entry) * TOTAL_SG_ENTRY, 2592 DMA_BIDIRECTIONAL); 2593 cblk->bufptr = (u32)dma_addr; 2594 cmnd->SCp.dma_handle = dma_addr; 2595 2596 cblk->sglen = nseg; 2597 2598 cblk->flags |= SCF_SG; /* Turn on SG list flag */ 2599 total_len = 0; 2600 sg = &cblk->sglist[0]; 2601 scsi_for_each_sg(cmnd, sglist, cblk->sglen, i) { 2602 sg->data = cpu_to_le32((u32)sg_dma_address(sglist)); 2603 sg->len = cpu_to_le32((u32)sg_dma_len(sglist)); 2604 total_len += sg_dma_len(sglist); 2605 ++sg; 2606 } 2607 2608 cblk->buflen = (scsi_bufflen(cmnd) > total_len) ? 2609 total_len : scsi_bufflen(cmnd); 2610 } else { /* No data transfer required */ 2611 cblk->buflen = 0; 2612 cblk->sglen = 0; 2613 } 2614 } 2615 2616 /** 2617 * i91u_queuecommand - Queue a new command if possible 2618 * @cmd: SCSI command block from the mid layer 2619 * @done: Completion handler 2620 * 2621 * Attempts to queue a new command with the host adapter. Will return 2622 * zero if successful or indicate a host busy condition if not (which 2623 * will cause the mid layer to call us again later with the command) 2624 */ 2625 2626 static int i91u_queuecommand_lck(struct scsi_cmnd *cmd, 2627 void (*done)(struct scsi_cmnd *)) 2628 { 2629 struct initio_host *host = (struct initio_host *) cmd->device->host->hostdata; 2630 struct scsi_ctrl_blk *cmnd; 2631 2632 cmd->scsi_done = done; 2633 2634 cmnd = initio_alloc_scb(host); 2635 if (!cmnd) 2636 return SCSI_MLQUEUE_HOST_BUSY; 2637 2638 initio_build_scb(host, cmnd, cmd); 2639 initio_exec_scb(host, cmnd); 2640 return 0; 2641 } 2642 2643 static DEF_SCSI_QCMD(i91u_queuecommand) 2644 2645 /** 2646 * i91u_bus_reset - reset the SCSI bus 2647 * @cmnd: Command block we want to trigger the reset for 2648 * 2649 * Initiate a SCSI bus reset sequence 2650 */ 2651 2652 static int i91u_bus_reset(struct scsi_cmnd * cmnd) 2653 { 2654 struct initio_host *host; 2655 2656 host = (struct initio_host *) cmnd->device->host->hostdata; 2657 2658 spin_lock_irq(cmnd->device->host->host_lock); 2659 initio_reset_scsi(host, 0); 2660 spin_unlock_irq(cmnd->device->host->host_lock); 2661 2662 return SUCCESS; 2663 } 2664 2665 /** 2666 * i91u_biospararm - return the "logical geometry 2667 * @sdev: SCSI device 2668 * @dev; Matching block device 2669 * @capacity: Sector size of drive 2670 * @info_array: Return space for BIOS geometry 2671 * 2672 * Map the device geometry in a manner compatible with the host 2673 * controller BIOS behaviour. 2674 * 2675 * FIXME: limited to 2^32 sector devices. 2676 */ 2677 2678 static int i91u_biosparam(struct scsi_device *sdev, struct block_device *dev, 2679 sector_t capacity, int *info_array) 2680 { 2681 struct initio_host *host; /* Point to Host adapter control block */ 2682 struct target_control *tc; 2683 2684 host = (struct initio_host *) sdev->host->hostdata; 2685 tc = &host->targets[sdev->id]; 2686 2687 if (tc->heads) { 2688 info_array[0] = tc->heads; 2689 info_array[1] = tc->sectors; 2690 info_array[2] = (unsigned long)capacity / tc->heads / tc->sectors; 2691 } else { 2692 if (tc->drv_flags & TCF_DRV_255_63) { 2693 info_array[0] = 255; 2694 info_array[1] = 63; 2695 info_array[2] = (unsigned long)capacity / 255 / 63; 2696 } else { 2697 info_array[0] = 64; 2698 info_array[1] = 32; 2699 info_array[2] = (unsigned long)capacity >> 11; 2700 } 2701 } 2702 2703 #if defined(DEBUG_BIOSPARAM) 2704 if (i91u_debug & debug_biosparam) { 2705 printk("bios geometry: head=%d, sec=%d, cyl=%d\n", 2706 info_array[0], info_array[1], info_array[2]); 2707 printk("WARNING: check, if the bios geometry is correct.\n"); 2708 } 2709 #endif 2710 2711 return 0; 2712 } 2713 2714 /** 2715 * i91u_unmap_scb - Unmap a command 2716 * @pci_dev: PCI device the command is for 2717 * @cmnd: The command itself 2718 * 2719 * Unmap any PCI mapping/IOMMU resources allocated when the command 2720 * was mapped originally as part of initio_build_scb 2721 */ 2722 2723 static void i91u_unmap_scb(struct pci_dev *pci_dev, struct scsi_cmnd *cmnd) 2724 { 2725 /* auto sense buffer */ 2726 if (cmnd->SCp.ptr) { 2727 dma_unmap_single(&pci_dev->dev, 2728 (dma_addr_t)((unsigned long)cmnd->SCp.ptr), 2729 SENSE_SIZE, DMA_FROM_DEVICE); 2730 cmnd->SCp.ptr = NULL; 2731 } 2732 2733 /* request buffer */ 2734 if (scsi_sg_count(cmnd)) { 2735 dma_unmap_single(&pci_dev->dev, cmnd->SCp.dma_handle, 2736 sizeof(struct sg_entry) * TOTAL_SG_ENTRY, 2737 DMA_BIDIRECTIONAL); 2738 2739 scsi_dma_unmap(cmnd); 2740 } 2741 } 2742 2743 /** 2744 * i91uSCBPost - SCSI callback 2745 * @host: Pointer to host adapter control block. 2746 * @cmnd: Pointer to SCSI control block. 2747 * 2748 * This is callback routine be called when tulip finish one 2749 * SCSI command. 2750 */ 2751 2752 static void i91uSCBPost(u8 * host_mem, u8 * cblk_mem) 2753 { 2754 struct scsi_cmnd *cmnd; /* Pointer to SCSI request block */ 2755 struct initio_host *host; 2756 struct scsi_ctrl_blk *cblk; 2757 2758 host = (struct initio_host *) host_mem; 2759 cblk = (struct scsi_ctrl_blk *) cblk_mem; 2760 if ((cmnd = cblk->srb) == NULL) { 2761 printk(KERN_ERR "i91uSCBPost: SRB pointer is empty\n"); 2762 WARN_ON(1); 2763 initio_release_scb(host, cblk); /* Release SCB for current channel */ 2764 return; 2765 } 2766 2767 /* 2768 * Remap the firmware error status into a mid layer one 2769 */ 2770 switch (cblk->hastat) { 2771 case 0x0: 2772 case 0xa: /* Linked command complete without error and linked normally */ 2773 case 0xb: /* Linked command complete without error interrupt generated */ 2774 cblk->hastat = 0; 2775 break; 2776 2777 case 0x11: /* Selection time out-The initiator selection or target 2778 reselection was not complete within the SCSI Time out period */ 2779 cblk->hastat = DID_TIME_OUT; 2780 break; 2781 2782 case 0x14: /* Target bus phase sequence failure-An invalid bus phase or bus 2783 phase sequence was requested by the target. The host adapter 2784 will generate a SCSI Reset Condition, notifying the host with 2785 a SCRD interrupt */ 2786 cblk->hastat = DID_RESET; 2787 break; 2788 2789 case 0x1a: /* SCB Aborted. 07/21/98 */ 2790 cblk->hastat = DID_ABORT; 2791 break; 2792 2793 case 0x12: /* Data overrun/underrun-The target attempted to transfer more data 2794 than was allocated by the Data Length field or the sum of the 2795 Scatter / Gather Data Length fields. */ 2796 case 0x13: /* Unexpected bus free-The target dropped the SCSI BSY at an unexpected time. */ 2797 case 0x16: /* Invalid SCB Operation Code. */ 2798 2799 default: 2800 printk("ini9100u: %x %x\n", cblk->hastat, cblk->tastat); 2801 cblk->hastat = DID_ERROR; /* Couldn't find any better */ 2802 break; 2803 } 2804 2805 cmnd->result = cblk->tastat | (cblk->hastat << 16); 2806 i91u_unmap_scb(host->pci_dev, cmnd); 2807 cmnd->scsi_done(cmnd); /* Notify system DONE */ 2808 initio_release_scb(host, cblk); /* Release SCB for current channel */ 2809 } 2810 2811 static struct scsi_host_template initio_template = { 2812 .proc_name = "INI9100U", 2813 .name = "Initio INI-9X00U/UW SCSI device driver", 2814 .queuecommand = i91u_queuecommand, 2815 .eh_bus_reset_handler = i91u_bus_reset, 2816 .bios_param = i91u_biosparam, 2817 .can_queue = MAX_TARGETS * i91u_MAXQUEUE, 2818 .this_id = 1, 2819 .sg_tablesize = SG_ALL, 2820 .use_clustering = ENABLE_CLUSTERING, 2821 }; 2822 2823 static int initio_probe_one(struct pci_dev *pdev, 2824 const struct pci_device_id *id) 2825 { 2826 struct Scsi_Host *shost; 2827 struct initio_host *host; 2828 u32 reg; 2829 u16 bios_seg; 2830 struct scsi_ctrl_blk *scb, *tmp, *prev = NULL /* silence gcc */; 2831 int num_scb, i, error; 2832 2833 error = pci_enable_device(pdev); 2834 if (error) 2835 return error; 2836 2837 pci_read_config_dword(pdev, 0x44, (u32 *) & reg); 2838 bios_seg = (u16) (reg & 0xFF); 2839 if (((reg & 0xFF00) >> 8) == 0xFF) 2840 reg = 0; 2841 bios_seg = (bios_seg << 8) + ((u16) ((reg & 0xFF00) >> 8)); 2842 2843 if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { 2844 printk(KERN_WARNING "i91u: Could not set 32 bit DMA mask\n"); 2845 error = -ENODEV; 2846 goto out_disable_device; 2847 } 2848 shost = scsi_host_alloc(&initio_template, sizeof(struct initio_host)); 2849 if (!shost) { 2850 printk(KERN_WARNING "initio: Could not allocate host structure.\n"); 2851 error = -ENOMEM; 2852 goto out_disable_device; 2853 } 2854 host = (struct initio_host *)shost->hostdata; 2855 memset(host, 0, sizeof(struct initio_host)); 2856 host->addr = pci_resource_start(pdev, 0); 2857 host->bios_addr = bios_seg; 2858 2859 if (!request_region(host->addr, 256, "i91u")) { 2860 printk(KERN_WARNING "initio: I/O port range 0x%x is busy.\n", host->addr); 2861 error = -ENODEV; 2862 goto out_host_put; 2863 } 2864 2865 if (initio_tag_enable) /* 1.01i */ 2866 num_scb = MAX_TARGETS * i91u_MAXQUEUE; 2867 else 2868 num_scb = MAX_TARGETS + 3; /* 1-tape, 1-CD_ROM, 1- extra */ 2869 2870 for (; num_scb >= MAX_TARGETS + 3; num_scb--) { 2871 i = num_scb * sizeof(struct scsi_ctrl_blk); 2872 if ((scb = kzalloc(i, GFP_DMA)) != NULL) 2873 break; 2874 } 2875 2876 if (!scb) { 2877 printk(KERN_WARNING "initio: Cannot allocate SCB array.\n"); 2878 error = -ENOMEM; 2879 goto out_release_region; 2880 } 2881 2882 host->pci_dev = pdev; 2883 2884 host->semaph = 1; 2885 spin_lock_init(&host->semaph_lock); 2886 host->num_scbs = num_scb; 2887 host->scb = scb; 2888 host->next_pending = scb; 2889 host->next_avail = scb; 2890 for (i = 0, tmp = scb; i < num_scb; i++, tmp++) { 2891 tmp->tagid = i; 2892 if (i != 0) 2893 prev->next = tmp; 2894 prev = tmp; 2895 } 2896 prev->next = NULL; 2897 host->scb_end = tmp; 2898 host->first_avail = scb; 2899 host->last_avail = prev; 2900 spin_lock_init(&host->avail_lock); 2901 2902 initio_init(host, phys_to_virt(((u32)bios_seg << 4))); 2903 2904 host->jsstatus0 = 0; 2905 2906 shost->io_port = host->addr; 2907 shost->n_io_port = 0xff; 2908 shost->can_queue = num_scb; /* 03/05/98 */ 2909 shost->unique_id = host->addr; 2910 shost->max_id = host->max_tar; 2911 shost->max_lun = 32; /* 10/21/97 */ 2912 shost->irq = pdev->irq; 2913 shost->this_id = host->scsi_id; /* Assign HCS index */ 2914 shost->base = host->addr; 2915 shost->sg_tablesize = TOTAL_SG_ENTRY; 2916 2917 error = request_irq(pdev->irq, i91u_intr, IRQF_SHARED, "i91u", shost); 2918 if (error < 0) { 2919 printk(KERN_WARNING "initio: Unable to request IRQ %d\n", pdev->irq); 2920 goto out_free_scbs; 2921 } 2922 2923 pci_set_drvdata(pdev, shost); 2924 2925 error = scsi_add_host(shost, &pdev->dev); 2926 if (error) 2927 goto out_free_irq; 2928 scsi_scan_host(shost); 2929 return 0; 2930 out_free_irq: 2931 free_irq(pdev->irq, shost); 2932 out_free_scbs: 2933 kfree(host->scb); 2934 out_release_region: 2935 release_region(host->addr, 256); 2936 out_host_put: 2937 scsi_host_put(shost); 2938 out_disable_device: 2939 pci_disable_device(pdev); 2940 return error; 2941 } 2942 2943 /** 2944 * initio_remove_one - control shutdown 2945 * @pdev: PCI device being released 2946 * 2947 * Release the resources assigned to this adapter after it has 2948 * finished being used. 2949 */ 2950 2951 static void initio_remove_one(struct pci_dev *pdev) 2952 { 2953 struct Scsi_Host *host = pci_get_drvdata(pdev); 2954 struct initio_host *s = (struct initio_host *)host->hostdata; 2955 scsi_remove_host(host); 2956 free_irq(pdev->irq, host); 2957 release_region(s->addr, 256); 2958 scsi_host_put(host); 2959 pci_disable_device(pdev); 2960 } 2961 2962 MODULE_LICENSE("GPL"); 2963 2964 static struct pci_device_id initio_pci_tbl[] = { 2965 {PCI_VENDOR_ID_INIT, 0x9500, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, 2966 {PCI_VENDOR_ID_INIT, 0x9400, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, 2967 {PCI_VENDOR_ID_INIT, 0x9401, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, 2968 {PCI_VENDOR_ID_INIT, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, 2969 {PCI_VENDOR_ID_DOMEX, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, 2970 {0,} 2971 }; 2972 MODULE_DEVICE_TABLE(pci, initio_pci_tbl); 2973 2974 static struct pci_driver initio_pci_driver = { 2975 .name = "initio", 2976 .id_table = initio_pci_tbl, 2977 .probe = initio_probe_one, 2978 .remove = initio_remove_one, 2979 }; 2980 2981 static int __init initio_init_driver(void) 2982 { 2983 return pci_register_driver(&initio_pci_driver); 2984 } 2985 2986 static void __exit initio_exit_driver(void) 2987 { 2988 pci_unregister_driver(&initio_pci_driver); 2989 } 2990 2991 MODULE_DESCRIPTION("Initio INI-9X00U/UW SCSI device driver"); 2992 MODULE_AUTHOR("Initio Corporation"); 2993 MODULE_LICENSE("GPL"); 2994 2995 module_init(initio_init_driver); 2996 module_exit(initio_exit_driver); 2997