1 /* 2 * Disk Array driver for HP Smart Array SAS controllers 3 * Copyright 2016 Microsemi Corporation 4 * Copyright 2014-2015 PMC-Sierra, Inc. 5 * Copyright 2000,2009-2015 Hewlett-Packard Development Company, L.P. 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License as published by 9 * the Free Software Foundation; version 2 of the License. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or 14 * NON INFRINGEMENT. See the GNU General Public License for more details. 15 * 16 * Questions/Comments/Bugfixes to esc.storagedev@microsemi.com 17 * 18 */ 19 20 #include <linux/module.h> 21 #include <linux/interrupt.h> 22 #include <linux/types.h> 23 #include <linux/pci.h> 24 #include <linux/kernel.h> 25 #include <linux/slab.h> 26 #include <linux/delay.h> 27 #include <linux/fs.h> 28 #include <linux/timer.h> 29 #include <linux/init.h> 30 #include <linux/spinlock.h> 31 #include <linux/compat.h> 32 #include <linux/blktrace_api.h> 33 #include <linux/uaccess.h> 34 #include <linux/io.h> 35 #include <linux/dma-mapping.h> 36 #include <linux/completion.h> 37 #include <linux/moduleparam.h> 38 #include <scsi/scsi.h> 39 #include <scsi/scsi_cmnd.h> 40 #include <scsi/scsi_device.h> 41 #include <scsi/scsi_host.h> 42 #include <scsi/scsi_tcq.h> 43 #include <scsi/scsi_eh.h> 44 #include <scsi/scsi_transport_sas.h> 45 #include <scsi/scsi_dbg.h> 46 #include <linux/cciss_ioctl.h> 47 #include <linux/string.h> 48 #include <linux/bitmap.h> 49 #include <linux/atomic.h> 50 #include <linux/jiffies.h> 51 #include <linux/percpu-defs.h> 52 #include <linux/percpu.h> 53 #include <asm/unaligned.h> 54 #include <asm/div64.h> 55 #include "hpsa_cmd.h" 56 #include "hpsa.h" 57 58 /* 59 * HPSA_DRIVER_VERSION must be 3 byte values (0-255) separated by '.' 60 * with an optional trailing '-' followed by a byte value (0-255). 61 */ 62 #define HPSA_DRIVER_VERSION "3.4.20-170" 63 #define DRIVER_NAME "HP HPSA Driver (v " HPSA_DRIVER_VERSION ")" 64 #define HPSA "hpsa" 65 66 /* How long to wait for CISS doorbell communication */ 67 #define CLEAR_EVENT_WAIT_INTERVAL 20 /* ms for each msleep() call */ 68 #define MODE_CHANGE_WAIT_INTERVAL 10 /* ms for each msleep() call */ 69 #define MAX_CLEAR_EVENT_WAIT 30000 /* times 20 ms = 600 s */ 70 #define MAX_MODE_CHANGE_WAIT 2000 /* times 10 ms = 20 s */ 71 #define MAX_IOCTL_CONFIG_WAIT 1000 72 73 /*define how many times we will try a command because of bus resets */ 74 #define MAX_CMD_RETRIES 3 75 /* How long to wait before giving up on a command */ 76 #define HPSA_EH_PTRAID_TIMEOUT (240 * HZ) 77 78 /* Embedded module documentation macros - see modules.h */ 79 MODULE_AUTHOR("Hewlett-Packard Company"); 80 MODULE_DESCRIPTION("Driver for HP Smart Array Controller version " \ 81 HPSA_DRIVER_VERSION); 82 MODULE_SUPPORTED_DEVICE("HP Smart Array Controllers"); 83 MODULE_VERSION(HPSA_DRIVER_VERSION); 84 MODULE_LICENSE("GPL"); 85 MODULE_ALIAS("cciss"); 86 87 static int hpsa_simple_mode; 88 module_param(hpsa_simple_mode, int, S_IRUGO|S_IWUSR); 89 MODULE_PARM_DESC(hpsa_simple_mode, 90 "Use 'simple mode' rather than 'performant mode'"); 91 92 /* define the PCI info for the cards we can control */ 93 static const struct pci_device_id hpsa_pci_device_id[] = { 94 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3241}, 95 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3243}, 96 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3245}, 97 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3247}, 98 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249}, 99 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324A}, 100 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324B}, 101 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3233}, 102 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x3350}, 103 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x3351}, 104 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x3352}, 105 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x3353}, 106 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x3354}, 107 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x3355}, 108 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x3356}, 109 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103c, 0x1920}, 110 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1921}, 111 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1922}, 112 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1923}, 113 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1924}, 114 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103c, 0x1925}, 115 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1926}, 116 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1928}, 117 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1929}, 118 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21BD}, 119 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21BE}, 120 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21BF}, 121 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21C0}, 122 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21C1}, 123 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21C2}, 124 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21C3}, 125 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21C4}, 126 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21C5}, 127 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21C6}, 128 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21C7}, 129 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21C8}, 130 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21C9}, 131 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21CA}, 132 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21CB}, 133 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21CC}, 134 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21CD}, 135 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21CE}, 136 {PCI_VENDOR_ID_ADAPTEC2, 0x0290, 0x9005, 0x0580}, 137 {PCI_VENDOR_ID_ADAPTEC2, 0x0290, 0x9005, 0x0581}, 138 {PCI_VENDOR_ID_ADAPTEC2, 0x0290, 0x9005, 0x0582}, 139 {PCI_VENDOR_ID_ADAPTEC2, 0x0290, 0x9005, 0x0583}, 140 {PCI_VENDOR_ID_ADAPTEC2, 0x0290, 0x9005, 0x0584}, 141 {PCI_VENDOR_ID_ADAPTEC2, 0x0290, 0x9005, 0x0585}, 142 {PCI_VENDOR_ID_HP_3PAR, 0x0075, 0x1590, 0x0076}, 143 {PCI_VENDOR_ID_HP_3PAR, 0x0075, 0x1590, 0x0087}, 144 {PCI_VENDOR_ID_HP_3PAR, 0x0075, 0x1590, 0x007D}, 145 {PCI_VENDOR_ID_HP_3PAR, 0x0075, 0x1590, 0x0088}, 146 {PCI_VENDOR_ID_HP, 0x333f, 0x103c, 0x333f}, 147 {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 148 PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0}, 149 {PCI_VENDOR_ID_COMPAQ, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 150 PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0}, 151 {0,} 152 }; 153 154 MODULE_DEVICE_TABLE(pci, hpsa_pci_device_id); 155 156 /* board_id = Subsystem Device ID & Vendor ID 157 * product = Marketing Name for the board 158 * access = Address of the struct of function pointers 159 */ 160 static struct board_type products[] = { 161 {0x40700E11, "Smart Array 5300", &SA5A_access}, 162 {0x40800E11, "Smart Array 5i", &SA5B_access}, 163 {0x40820E11, "Smart Array 532", &SA5B_access}, 164 {0x40830E11, "Smart Array 5312", &SA5B_access}, 165 {0x409A0E11, "Smart Array 641", &SA5A_access}, 166 {0x409B0E11, "Smart Array 642", &SA5A_access}, 167 {0x409C0E11, "Smart Array 6400", &SA5A_access}, 168 {0x409D0E11, "Smart Array 6400 EM", &SA5A_access}, 169 {0x40910E11, "Smart Array 6i", &SA5A_access}, 170 {0x3225103C, "Smart Array P600", &SA5A_access}, 171 {0x3223103C, "Smart Array P800", &SA5A_access}, 172 {0x3234103C, "Smart Array P400", &SA5A_access}, 173 {0x3235103C, "Smart Array P400i", &SA5A_access}, 174 {0x3211103C, "Smart Array E200i", &SA5A_access}, 175 {0x3212103C, "Smart Array E200", &SA5A_access}, 176 {0x3213103C, "Smart Array E200i", &SA5A_access}, 177 {0x3214103C, "Smart Array E200i", &SA5A_access}, 178 {0x3215103C, "Smart Array E200i", &SA5A_access}, 179 {0x3237103C, "Smart Array E500", &SA5A_access}, 180 {0x323D103C, "Smart Array P700m", &SA5A_access}, 181 {0x3241103C, "Smart Array P212", &SA5_access}, 182 {0x3243103C, "Smart Array P410", &SA5_access}, 183 {0x3245103C, "Smart Array P410i", &SA5_access}, 184 {0x3247103C, "Smart Array P411", &SA5_access}, 185 {0x3249103C, "Smart Array P812", &SA5_access}, 186 {0x324A103C, "Smart Array P712m", &SA5_access}, 187 {0x324B103C, "Smart Array P711m", &SA5_access}, 188 {0x3233103C, "HP StorageWorks 1210m", &SA5_access}, /* alias of 333f */ 189 {0x3350103C, "Smart Array P222", &SA5_access}, 190 {0x3351103C, "Smart Array P420", &SA5_access}, 191 {0x3352103C, "Smart Array P421", &SA5_access}, 192 {0x3353103C, "Smart Array P822", &SA5_access}, 193 {0x3354103C, "Smart Array P420i", &SA5_access}, 194 {0x3355103C, "Smart Array P220i", &SA5_access}, 195 {0x3356103C, "Smart Array P721m", &SA5_access}, 196 {0x1920103C, "Smart Array P430i", &SA5_access}, 197 {0x1921103C, "Smart Array P830i", &SA5_access}, 198 {0x1922103C, "Smart Array P430", &SA5_access}, 199 {0x1923103C, "Smart Array P431", &SA5_access}, 200 {0x1924103C, "Smart Array P830", &SA5_access}, 201 {0x1925103C, "Smart Array P831", &SA5_access}, 202 {0x1926103C, "Smart Array P731m", &SA5_access}, 203 {0x1928103C, "Smart Array P230i", &SA5_access}, 204 {0x1929103C, "Smart Array P530", &SA5_access}, 205 {0x21BD103C, "Smart Array P244br", &SA5_access}, 206 {0x21BE103C, "Smart Array P741m", &SA5_access}, 207 {0x21BF103C, "Smart HBA H240ar", &SA5_access}, 208 {0x21C0103C, "Smart Array P440ar", &SA5_access}, 209 {0x21C1103C, "Smart Array P840ar", &SA5_access}, 210 {0x21C2103C, "Smart Array P440", &SA5_access}, 211 {0x21C3103C, "Smart Array P441", &SA5_access}, 212 {0x21C4103C, "Smart Array", &SA5_access}, 213 {0x21C5103C, "Smart Array P841", &SA5_access}, 214 {0x21C6103C, "Smart HBA H244br", &SA5_access}, 215 {0x21C7103C, "Smart HBA H240", &SA5_access}, 216 {0x21C8103C, "Smart HBA H241", &SA5_access}, 217 {0x21C9103C, "Smart Array", &SA5_access}, 218 {0x21CA103C, "Smart Array P246br", &SA5_access}, 219 {0x21CB103C, "Smart Array P840", &SA5_access}, 220 {0x21CC103C, "Smart Array", &SA5_access}, 221 {0x21CD103C, "Smart Array", &SA5_access}, 222 {0x21CE103C, "Smart HBA", &SA5_access}, 223 {0x05809005, "SmartHBA-SA", &SA5_access}, 224 {0x05819005, "SmartHBA-SA 8i", &SA5_access}, 225 {0x05829005, "SmartHBA-SA 8i8e", &SA5_access}, 226 {0x05839005, "SmartHBA-SA 8e", &SA5_access}, 227 {0x05849005, "SmartHBA-SA 16i", &SA5_access}, 228 {0x05859005, "SmartHBA-SA 4i4e", &SA5_access}, 229 {0x00761590, "HP Storage P1224 Array Controller", &SA5_access}, 230 {0x00871590, "HP Storage P1224e Array Controller", &SA5_access}, 231 {0x007D1590, "HP Storage P1228 Array Controller", &SA5_access}, 232 {0x00881590, "HP Storage P1228e Array Controller", &SA5_access}, 233 {0x333f103c, "HP StorageWorks 1210m Array Controller", &SA5_access}, 234 {0xFFFF103C, "Unknown Smart Array", &SA5_access}, 235 }; 236 237 static struct scsi_transport_template *hpsa_sas_transport_template; 238 static int hpsa_add_sas_host(struct ctlr_info *h); 239 static void hpsa_delete_sas_host(struct ctlr_info *h); 240 static int hpsa_add_sas_device(struct hpsa_sas_node *hpsa_sas_node, 241 struct hpsa_scsi_dev_t *device); 242 static void hpsa_remove_sas_device(struct hpsa_scsi_dev_t *device); 243 static struct hpsa_scsi_dev_t 244 *hpsa_find_device_by_sas_rphy(struct ctlr_info *h, 245 struct sas_rphy *rphy); 246 247 #define SCSI_CMD_BUSY ((struct scsi_cmnd *)&hpsa_cmd_busy) 248 static const struct scsi_cmnd hpsa_cmd_busy; 249 #define SCSI_CMD_IDLE ((struct scsi_cmnd *)&hpsa_cmd_idle) 250 static const struct scsi_cmnd hpsa_cmd_idle; 251 static int number_of_controllers; 252 253 static irqreturn_t do_hpsa_intr_intx(int irq, void *dev_id); 254 static irqreturn_t do_hpsa_intr_msi(int irq, void *dev_id); 255 static int hpsa_ioctl(struct scsi_device *dev, unsigned int cmd, 256 void __user *arg); 257 258 #ifdef CONFIG_COMPAT 259 static int hpsa_compat_ioctl(struct scsi_device *dev, unsigned int cmd, 260 void __user *arg); 261 #endif 262 263 static void cmd_free(struct ctlr_info *h, struct CommandList *c); 264 static struct CommandList *cmd_alloc(struct ctlr_info *h); 265 static void cmd_tagged_free(struct ctlr_info *h, struct CommandList *c); 266 static struct CommandList *cmd_tagged_alloc(struct ctlr_info *h, 267 struct scsi_cmnd *scmd); 268 static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h, 269 void *buff, size_t size, u16 page_code, unsigned char *scsi3addr, 270 int cmd_type); 271 static void hpsa_free_cmd_pool(struct ctlr_info *h); 272 #define VPD_PAGE (1 << 8) 273 #define HPSA_SIMPLE_ERROR_BITS 0x03 274 275 static int hpsa_scsi_queue_command(struct Scsi_Host *h, struct scsi_cmnd *cmd); 276 static void hpsa_scan_start(struct Scsi_Host *); 277 static int hpsa_scan_finished(struct Scsi_Host *sh, 278 unsigned long elapsed_time); 279 static int hpsa_change_queue_depth(struct scsi_device *sdev, int qdepth); 280 281 static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd); 282 static int hpsa_slave_alloc(struct scsi_device *sdev); 283 static int hpsa_slave_configure(struct scsi_device *sdev); 284 static void hpsa_slave_destroy(struct scsi_device *sdev); 285 286 static void hpsa_update_scsi_devices(struct ctlr_info *h); 287 static int check_for_unit_attention(struct ctlr_info *h, 288 struct CommandList *c); 289 static void check_ioctl_unit_attention(struct ctlr_info *h, 290 struct CommandList *c); 291 /* performant mode helper functions */ 292 static void calc_bucket_map(int *bucket, int num_buckets, 293 int nsgs, int min_blocks, u32 *bucket_map); 294 static void hpsa_free_performant_mode(struct ctlr_info *h); 295 static int hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h); 296 static inline u32 next_command(struct ctlr_info *h, u8 q); 297 static int hpsa_find_cfg_addrs(struct pci_dev *pdev, void __iomem *vaddr, 298 u32 *cfg_base_addr, u64 *cfg_base_addr_index, 299 u64 *cfg_offset); 300 static int hpsa_pci_find_memory_BAR(struct pci_dev *pdev, 301 unsigned long *memory_bar); 302 static int hpsa_lookup_board_id(struct pci_dev *pdev, u32 *board_id, 303 bool *legacy_board); 304 static int wait_for_device_to_become_ready(struct ctlr_info *h, 305 unsigned char lunaddr[], 306 int reply_queue); 307 static int hpsa_wait_for_board_state(struct pci_dev *pdev, void __iomem *vaddr, 308 int wait_for_ready); 309 static inline void finish_cmd(struct CommandList *c); 310 static int hpsa_wait_for_mode_change_ack(struct ctlr_info *h); 311 #define BOARD_NOT_READY 0 312 #define BOARD_READY 1 313 static void hpsa_drain_accel_commands(struct ctlr_info *h); 314 static void hpsa_flush_cache(struct ctlr_info *h); 315 static int hpsa_scsi_ioaccel_queue_command(struct ctlr_info *h, 316 struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len, 317 u8 *scsi3addr, struct hpsa_scsi_dev_t *phys_disk); 318 static void hpsa_command_resubmit_worker(struct work_struct *work); 319 static u32 lockup_detected(struct ctlr_info *h); 320 static int detect_controller_lockup(struct ctlr_info *h); 321 static void hpsa_disable_rld_caching(struct ctlr_info *h); 322 static inline int hpsa_scsi_do_report_phys_luns(struct ctlr_info *h, 323 struct ReportExtendedLUNdata *buf, int bufsize); 324 static bool hpsa_vpd_page_supported(struct ctlr_info *h, 325 unsigned char scsi3addr[], u8 page); 326 static int hpsa_luns_changed(struct ctlr_info *h); 327 static bool hpsa_cmd_dev_match(struct ctlr_info *h, struct CommandList *c, 328 struct hpsa_scsi_dev_t *dev, 329 unsigned char *scsi3addr); 330 331 static inline struct ctlr_info *sdev_to_hba(struct scsi_device *sdev) 332 { 333 unsigned long *priv = shost_priv(sdev->host); 334 return (struct ctlr_info *) *priv; 335 } 336 337 static inline struct ctlr_info *shost_to_hba(struct Scsi_Host *sh) 338 { 339 unsigned long *priv = shost_priv(sh); 340 return (struct ctlr_info *) *priv; 341 } 342 343 static inline bool hpsa_is_cmd_idle(struct CommandList *c) 344 { 345 return c->scsi_cmd == SCSI_CMD_IDLE; 346 } 347 348 /* extract sense key, asc, and ascq from sense data. -1 means invalid. */ 349 static void decode_sense_data(const u8 *sense_data, int sense_data_len, 350 u8 *sense_key, u8 *asc, u8 *ascq) 351 { 352 struct scsi_sense_hdr sshdr; 353 bool rc; 354 355 *sense_key = -1; 356 *asc = -1; 357 *ascq = -1; 358 359 if (sense_data_len < 1) 360 return; 361 362 rc = scsi_normalize_sense(sense_data, sense_data_len, &sshdr); 363 if (rc) { 364 *sense_key = sshdr.sense_key; 365 *asc = sshdr.asc; 366 *ascq = sshdr.ascq; 367 } 368 } 369 370 static int check_for_unit_attention(struct ctlr_info *h, 371 struct CommandList *c) 372 { 373 u8 sense_key, asc, ascq; 374 int sense_len; 375 376 if (c->err_info->SenseLen > sizeof(c->err_info->SenseInfo)) 377 sense_len = sizeof(c->err_info->SenseInfo); 378 else 379 sense_len = c->err_info->SenseLen; 380 381 decode_sense_data(c->err_info->SenseInfo, sense_len, 382 &sense_key, &asc, &ascq); 383 if (sense_key != UNIT_ATTENTION || asc == 0xff) 384 return 0; 385 386 switch (asc) { 387 case STATE_CHANGED: 388 dev_warn(&h->pdev->dev, 389 "%s: a state change detected, command retried\n", 390 h->devname); 391 break; 392 case LUN_FAILED: 393 dev_warn(&h->pdev->dev, 394 "%s: LUN failure detected\n", h->devname); 395 break; 396 case REPORT_LUNS_CHANGED: 397 dev_warn(&h->pdev->dev, 398 "%s: report LUN data changed\n", h->devname); 399 /* 400 * Note: this REPORT_LUNS_CHANGED condition only occurs on the external 401 * target (array) devices. 402 */ 403 break; 404 case POWER_OR_RESET: 405 dev_warn(&h->pdev->dev, 406 "%s: a power on or device reset detected\n", 407 h->devname); 408 break; 409 case UNIT_ATTENTION_CLEARED: 410 dev_warn(&h->pdev->dev, 411 "%s: unit attention cleared by another initiator\n", 412 h->devname); 413 break; 414 default: 415 dev_warn(&h->pdev->dev, 416 "%s: unknown unit attention detected\n", 417 h->devname); 418 break; 419 } 420 return 1; 421 } 422 423 static int check_for_busy(struct ctlr_info *h, struct CommandList *c) 424 { 425 if (c->err_info->CommandStatus != CMD_TARGET_STATUS || 426 (c->err_info->ScsiStatus != SAM_STAT_BUSY && 427 c->err_info->ScsiStatus != SAM_STAT_TASK_SET_FULL)) 428 return 0; 429 dev_warn(&h->pdev->dev, HPSA "device busy"); 430 return 1; 431 } 432 433 static u32 lockup_detected(struct ctlr_info *h); 434 static ssize_t host_show_lockup_detected(struct device *dev, 435 struct device_attribute *attr, char *buf) 436 { 437 int ld; 438 struct ctlr_info *h; 439 struct Scsi_Host *shost = class_to_shost(dev); 440 441 h = shost_to_hba(shost); 442 ld = lockup_detected(h); 443 444 return sprintf(buf, "ld=%d\n", ld); 445 } 446 447 static ssize_t host_store_hp_ssd_smart_path_status(struct device *dev, 448 struct device_attribute *attr, 449 const char *buf, size_t count) 450 { 451 int status, len; 452 struct ctlr_info *h; 453 struct Scsi_Host *shost = class_to_shost(dev); 454 char tmpbuf[10]; 455 456 if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) 457 return -EACCES; 458 len = count > sizeof(tmpbuf) - 1 ? sizeof(tmpbuf) - 1 : count; 459 strncpy(tmpbuf, buf, len); 460 tmpbuf[len] = '\0'; 461 if (sscanf(tmpbuf, "%d", &status) != 1) 462 return -EINVAL; 463 h = shost_to_hba(shost); 464 h->acciopath_status = !!status; 465 dev_warn(&h->pdev->dev, 466 "hpsa: HP SSD Smart Path %s via sysfs update.\n", 467 h->acciopath_status ? "enabled" : "disabled"); 468 return count; 469 } 470 471 static ssize_t host_store_raid_offload_debug(struct device *dev, 472 struct device_attribute *attr, 473 const char *buf, size_t count) 474 { 475 int debug_level, len; 476 struct ctlr_info *h; 477 struct Scsi_Host *shost = class_to_shost(dev); 478 char tmpbuf[10]; 479 480 if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) 481 return -EACCES; 482 len = count > sizeof(tmpbuf) - 1 ? sizeof(tmpbuf) - 1 : count; 483 strncpy(tmpbuf, buf, len); 484 tmpbuf[len] = '\0'; 485 if (sscanf(tmpbuf, "%d", &debug_level) != 1) 486 return -EINVAL; 487 if (debug_level < 0) 488 debug_level = 0; 489 h = shost_to_hba(shost); 490 h->raid_offload_debug = debug_level; 491 dev_warn(&h->pdev->dev, "hpsa: Set raid_offload_debug level = %d\n", 492 h->raid_offload_debug); 493 return count; 494 } 495 496 static ssize_t host_store_rescan(struct device *dev, 497 struct device_attribute *attr, 498 const char *buf, size_t count) 499 { 500 struct ctlr_info *h; 501 struct Scsi_Host *shost = class_to_shost(dev); 502 h = shost_to_hba(shost); 503 hpsa_scan_start(h->scsi_host); 504 return count; 505 } 506 507 static ssize_t host_show_firmware_revision(struct device *dev, 508 struct device_attribute *attr, char *buf) 509 { 510 struct ctlr_info *h; 511 struct Scsi_Host *shost = class_to_shost(dev); 512 unsigned char *fwrev; 513 514 h = shost_to_hba(shost); 515 if (!h->hba_inquiry_data) 516 return 0; 517 fwrev = &h->hba_inquiry_data[32]; 518 return snprintf(buf, 20, "%c%c%c%c\n", 519 fwrev[0], fwrev[1], fwrev[2], fwrev[3]); 520 } 521 522 static ssize_t host_show_commands_outstanding(struct device *dev, 523 struct device_attribute *attr, char *buf) 524 { 525 struct Scsi_Host *shost = class_to_shost(dev); 526 struct ctlr_info *h = shost_to_hba(shost); 527 528 return snprintf(buf, 20, "%d\n", 529 atomic_read(&h->commands_outstanding)); 530 } 531 532 static ssize_t host_show_transport_mode(struct device *dev, 533 struct device_attribute *attr, char *buf) 534 { 535 struct ctlr_info *h; 536 struct Scsi_Host *shost = class_to_shost(dev); 537 538 h = shost_to_hba(shost); 539 return snprintf(buf, 20, "%s\n", 540 h->transMethod & CFGTBL_Trans_Performant ? 541 "performant" : "simple"); 542 } 543 544 static ssize_t host_show_hp_ssd_smart_path_status(struct device *dev, 545 struct device_attribute *attr, char *buf) 546 { 547 struct ctlr_info *h; 548 struct Scsi_Host *shost = class_to_shost(dev); 549 550 h = shost_to_hba(shost); 551 return snprintf(buf, 30, "HP SSD Smart Path %s\n", 552 (h->acciopath_status == 1) ? "enabled" : "disabled"); 553 } 554 555 /* List of controllers which cannot be hard reset on kexec with reset_devices */ 556 static u32 unresettable_controller[] = { 557 0x324a103C, /* Smart Array P712m */ 558 0x324b103C, /* Smart Array P711m */ 559 0x3223103C, /* Smart Array P800 */ 560 0x3234103C, /* Smart Array P400 */ 561 0x3235103C, /* Smart Array P400i */ 562 0x3211103C, /* Smart Array E200i */ 563 0x3212103C, /* Smart Array E200 */ 564 0x3213103C, /* Smart Array E200i */ 565 0x3214103C, /* Smart Array E200i */ 566 0x3215103C, /* Smart Array E200i */ 567 0x3237103C, /* Smart Array E500 */ 568 0x323D103C, /* Smart Array P700m */ 569 0x40800E11, /* Smart Array 5i */ 570 0x409C0E11, /* Smart Array 6400 */ 571 0x409D0E11, /* Smart Array 6400 EM */ 572 0x40700E11, /* Smart Array 5300 */ 573 0x40820E11, /* Smart Array 532 */ 574 0x40830E11, /* Smart Array 5312 */ 575 0x409A0E11, /* Smart Array 641 */ 576 0x409B0E11, /* Smart Array 642 */ 577 0x40910E11, /* Smart Array 6i */ 578 }; 579 580 /* List of controllers which cannot even be soft reset */ 581 static u32 soft_unresettable_controller[] = { 582 0x40800E11, /* Smart Array 5i */ 583 0x40700E11, /* Smart Array 5300 */ 584 0x40820E11, /* Smart Array 532 */ 585 0x40830E11, /* Smart Array 5312 */ 586 0x409A0E11, /* Smart Array 641 */ 587 0x409B0E11, /* Smart Array 642 */ 588 0x40910E11, /* Smart Array 6i */ 589 /* Exclude 640x boards. These are two pci devices in one slot 590 * which share a battery backed cache module. One controls the 591 * cache, the other accesses the cache through the one that controls 592 * it. If we reset the one controlling the cache, the other will 593 * likely not be happy. Just forbid resetting this conjoined mess. 594 * The 640x isn't really supported by hpsa anyway. 595 */ 596 0x409C0E11, /* Smart Array 6400 */ 597 0x409D0E11, /* Smart Array 6400 EM */ 598 }; 599 600 static int board_id_in_array(u32 a[], int nelems, u32 board_id) 601 { 602 int i; 603 604 for (i = 0; i < nelems; i++) 605 if (a[i] == board_id) 606 return 1; 607 return 0; 608 } 609 610 static int ctlr_is_hard_resettable(u32 board_id) 611 { 612 return !board_id_in_array(unresettable_controller, 613 ARRAY_SIZE(unresettable_controller), board_id); 614 } 615 616 static int ctlr_is_soft_resettable(u32 board_id) 617 { 618 return !board_id_in_array(soft_unresettable_controller, 619 ARRAY_SIZE(soft_unresettable_controller), board_id); 620 } 621 622 static int ctlr_is_resettable(u32 board_id) 623 { 624 return ctlr_is_hard_resettable(board_id) || 625 ctlr_is_soft_resettable(board_id); 626 } 627 628 static ssize_t host_show_resettable(struct device *dev, 629 struct device_attribute *attr, char *buf) 630 { 631 struct ctlr_info *h; 632 struct Scsi_Host *shost = class_to_shost(dev); 633 634 h = shost_to_hba(shost); 635 return snprintf(buf, 20, "%d\n", ctlr_is_resettable(h->board_id)); 636 } 637 638 static inline int is_logical_dev_addr_mode(unsigned char scsi3addr[]) 639 { 640 return (scsi3addr[3] & 0xC0) == 0x40; 641 } 642 643 static const char * const raid_label[] = { "0", "4", "1(+0)", "5", "5+1", "6", 644 "1(+0)ADM", "UNKNOWN", "PHYS DRV" 645 }; 646 #define HPSA_RAID_0 0 647 #define HPSA_RAID_4 1 648 #define HPSA_RAID_1 2 /* also used for RAID 10 */ 649 #define HPSA_RAID_5 3 /* also used for RAID 50 */ 650 #define HPSA_RAID_51 4 651 #define HPSA_RAID_6 5 /* also used for RAID 60 */ 652 #define HPSA_RAID_ADM 6 /* also used for RAID 1+0 ADM */ 653 #define RAID_UNKNOWN (ARRAY_SIZE(raid_label) - 2) 654 #define PHYSICAL_DRIVE (ARRAY_SIZE(raid_label) - 1) 655 656 static inline bool is_logical_device(struct hpsa_scsi_dev_t *device) 657 { 658 return !device->physical_device; 659 } 660 661 static ssize_t raid_level_show(struct device *dev, 662 struct device_attribute *attr, char *buf) 663 { 664 ssize_t l = 0; 665 unsigned char rlevel; 666 struct ctlr_info *h; 667 struct scsi_device *sdev; 668 struct hpsa_scsi_dev_t *hdev; 669 unsigned long flags; 670 671 sdev = to_scsi_device(dev); 672 h = sdev_to_hba(sdev); 673 spin_lock_irqsave(&h->lock, flags); 674 hdev = sdev->hostdata; 675 if (!hdev) { 676 spin_unlock_irqrestore(&h->lock, flags); 677 return -ENODEV; 678 } 679 680 /* Is this even a logical drive? */ 681 if (!is_logical_device(hdev)) { 682 spin_unlock_irqrestore(&h->lock, flags); 683 l = snprintf(buf, PAGE_SIZE, "N/A\n"); 684 return l; 685 } 686 687 rlevel = hdev->raid_level; 688 spin_unlock_irqrestore(&h->lock, flags); 689 if (rlevel > RAID_UNKNOWN) 690 rlevel = RAID_UNKNOWN; 691 l = snprintf(buf, PAGE_SIZE, "RAID %s\n", raid_label[rlevel]); 692 return l; 693 } 694 695 static ssize_t lunid_show(struct device *dev, 696 struct device_attribute *attr, char *buf) 697 { 698 struct ctlr_info *h; 699 struct scsi_device *sdev; 700 struct hpsa_scsi_dev_t *hdev; 701 unsigned long flags; 702 unsigned char lunid[8]; 703 704 sdev = to_scsi_device(dev); 705 h = sdev_to_hba(sdev); 706 spin_lock_irqsave(&h->lock, flags); 707 hdev = sdev->hostdata; 708 if (!hdev) { 709 spin_unlock_irqrestore(&h->lock, flags); 710 return -ENODEV; 711 } 712 memcpy(lunid, hdev->scsi3addr, sizeof(lunid)); 713 spin_unlock_irqrestore(&h->lock, flags); 714 return snprintf(buf, 20, "0x%8phN\n", lunid); 715 } 716 717 static ssize_t unique_id_show(struct device *dev, 718 struct device_attribute *attr, char *buf) 719 { 720 struct ctlr_info *h; 721 struct scsi_device *sdev; 722 struct hpsa_scsi_dev_t *hdev; 723 unsigned long flags; 724 unsigned char sn[16]; 725 726 sdev = to_scsi_device(dev); 727 h = sdev_to_hba(sdev); 728 spin_lock_irqsave(&h->lock, flags); 729 hdev = sdev->hostdata; 730 if (!hdev) { 731 spin_unlock_irqrestore(&h->lock, flags); 732 return -ENODEV; 733 } 734 memcpy(sn, hdev->device_id, sizeof(sn)); 735 spin_unlock_irqrestore(&h->lock, flags); 736 return snprintf(buf, 16 * 2 + 2, 737 "%02X%02X%02X%02X%02X%02X%02X%02X" 738 "%02X%02X%02X%02X%02X%02X%02X%02X\n", 739 sn[0], sn[1], sn[2], sn[3], 740 sn[4], sn[5], sn[6], sn[7], 741 sn[8], sn[9], sn[10], sn[11], 742 sn[12], sn[13], sn[14], sn[15]); 743 } 744 745 static ssize_t sas_address_show(struct device *dev, 746 struct device_attribute *attr, char *buf) 747 { 748 struct ctlr_info *h; 749 struct scsi_device *sdev; 750 struct hpsa_scsi_dev_t *hdev; 751 unsigned long flags; 752 u64 sas_address; 753 754 sdev = to_scsi_device(dev); 755 h = sdev_to_hba(sdev); 756 spin_lock_irqsave(&h->lock, flags); 757 hdev = sdev->hostdata; 758 if (!hdev || is_logical_device(hdev) || !hdev->expose_device) { 759 spin_unlock_irqrestore(&h->lock, flags); 760 return -ENODEV; 761 } 762 sas_address = hdev->sas_address; 763 spin_unlock_irqrestore(&h->lock, flags); 764 765 return snprintf(buf, PAGE_SIZE, "0x%016llx\n", sas_address); 766 } 767 768 static ssize_t host_show_hp_ssd_smart_path_enabled(struct device *dev, 769 struct device_attribute *attr, char *buf) 770 { 771 struct ctlr_info *h; 772 struct scsi_device *sdev; 773 struct hpsa_scsi_dev_t *hdev; 774 unsigned long flags; 775 int offload_enabled; 776 777 sdev = to_scsi_device(dev); 778 h = sdev_to_hba(sdev); 779 spin_lock_irqsave(&h->lock, flags); 780 hdev = sdev->hostdata; 781 if (!hdev) { 782 spin_unlock_irqrestore(&h->lock, flags); 783 return -ENODEV; 784 } 785 offload_enabled = hdev->offload_enabled; 786 spin_unlock_irqrestore(&h->lock, flags); 787 788 if (hdev->devtype == TYPE_DISK || hdev->devtype == TYPE_ZBC) 789 return snprintf(buf, 20, "%d\n", offload_enabled); 790 else 791 return snprintf(buf, 40, "%s\n", 792 "Not applicable for a controller"); 793 } 794 795 #define MAX_PATHS 8 796 static ssize_t path_info_show(struct device *dev, 797 struct device_attribute *attr, char *buf) 798 { 799 struct ctlr_info *h; 800 struct scsi_device *sdev; 801 struct hpsa_scsi_dev_t *hdev; 802 unsigned long flags; 803 int i; 804 int output_len = 0; 805 u8 box; 806 u8 bay; 807 u8 path_map_index = 0; 808 char *active; 809 unsigned char phys_connector[2]; 810 811 sdev = to_scsi_device(dev); 812 h = sdev_to_hba(sdev); 813 spin_lock_irqsave(&h->devlock, flags); 814 hdev = sdev->hostdata; 815 if (!hdev) { 816 spin_unlock_irqrestore(&h->devlock, flags); 817 return -ENODEV; 818 } 819 820 bay = hdev->bay; 821 for (i = 0; i < MAX_PATHS; i++) { 822 path_map_index = 1<<i; 823 if (i == hdev->active_path_index) 824 active = "Active"; 825 else if (hdev->path_map & path_map_index) 826 active = "Inactive"; 827 else 828 continue; 829 830 output_len += scnprintf(buf + output_len, 831 PAGE_SIZE - output_len, 832 "[%d:%d:%d:%d] %20.20s ", 833 h->scsi_host->host_no, 834 hdev->bus, hdev->target, hdev->lun, 835 scsi_device_type(hdev->devtype)); 836 837 if (hdev->devtype == TYPE_RAID || is_logical_device(hdev)) { 838 output_len += scnprintf(buf + output_len, 839 PAGE_SIZE - output_len, 840 "%s\n", active); 841 continue; 842 } 843 844 box = hdev->box[i]; 845 memcpy(&phys_connector, &hdev->phys_connector[i], 846 sizeof(phys_connector)); 847 if (phys_connector[0] < '0') 848 phys_connector[0] = '0'; 849 if (phys_connector[1] < '0') 850 phys_connector[1] = '0'; 851 output_len += scnprintf(buf + output_len, 852 PAGE_SIZE - output_len, 853 "PORT: %.2s ", 854 phys_connector); 855 if ((hdev->devtype == TYPE_DISK || hdev->devtype == TYPE_ZBC) && 856 hdev->expose_device) { 857 if (box == 0 || box == 0xFF) { 858 output_len += scnprintf(buf + output_len, 859 PAGE_SIZE - output_len, 860 "BAY: %hhu %s\n", 861 bay, active); 862 } else { 863 output_len += scnprintf(buf + output_len, 864 PAGE_SIZE - output_len, 865 "BOX: %hhu BAY: %hhu %s\n", 866 box, bay, active); 867 } 868 } else if (box != 0 && box != 0xFF) { 869 output_len += scnprintf(buf + output_len, 870 PAGE_SIZE - output_len, "BOX: %hhu %s\n", 871 box, active); 872 } else 873 output_len += scnprintf(buf + output_len, 874 PAGE_SIZE - output_len, "%s\n", active); 875 } 876 877 spin_unlock_irqrestore(&h->devlock, flags); 878 return output_len; 879 } 880 881 static ssize_t host_show_ctlr_num(struct device *dev, 882 struct device_attribute *attr, char *buf) 883 { 884 struct ctlr_info *h; 885 struct Scsi_Host *shost = class_to_shost(dev); 886 887 h = shost_to_hba(shost); 888 return snprintf(buf, 20, "%d\n", h->ctlr); 889 } 890 891 static ssize_t host_show_legacy_board(struct device *dev, 892 struct device_attribute *attr, char *buf) 893 { 894 struct ctlr_info *h; 895 struct Scsi_Host *shost = class_to_shost(dev); 896 897 h = shost_to_hba(shost); 898 return snprintf(buf, 20, "%d\n", h->legacy_board ? 1 : 0); 899 } 900 901 static DEVICE_ATTR_RO(raid_level); 902 static DEVICE_ATTR_RO(lunid); 903 static DEVICE_ATTR_RO(unique_id); 904 static DEVICE_ATTR(rescan, S_IWUSR, NULL, host_store_rescan); 905 static DEVICE_ATTR_RO(sas_address); 906 static DEVICE_ATTR(hp_ssd_smart_path_enabled, S_IRUGO, 907 host_show_hp_ssd_smart_path_enabled, NULL); 908 static DEVICE_ATTR_RO(path_info); 909 static DEVICE_ATTR(hp_ssd_smart_path_status, S_IWUSR|S_IRUGO|S_IROTH, 910 host_show_hp_ssd_smart_path_status, 911 host_store_hp_ssd_smart_path_status); 912 static DEVICE_ATTR(raid_offload_debug, S_IWUSR, NULL, 913 host_store_raid_offload_debug); 914 static DEVICE_ATTR(firmware_revision, S_IRUGO, 915 host_show_firmware_revision, NULL); 916 static DEVICE_ATTR(commands_outstanding, S_IRUGO, 917 host_show_commands_outstanding, NULL); 918 static DEVICE_ATTR(transport_mode, S_IRUGO, 919 host_show_transport_mode, NULL); 920 static DEVICE_ATTR(resettable, S_IRUGO, 921 host_show_resettable, NULL); 922 static DEVICE_ATTR(lockup_detected, S_IRUGO, 923 host_show_lockup_detected, NULL); 924 static DEVICE_ATTR(ctlr_num, S_IRUGO, 925 host_show_ctlr_num, NULL); 926 static DEVICE_ATTR(legacy_board, S_IRUGO, 927 host_show_legacy_board, NULL); 928 929 static struct device_attribute *hpsa_sdev_attrs[] = { 930 &dev_attr_raid_level, 931 &dev_attr_lunid, 932 &dev_attr_unique_id, 933 &dev_attr_hp_ssd_smart_path_enabled, 934 &dev_attr_path_info, 935 &dev_attr_sas_address, 936 NULL, 937 }; 938 939 static struct device_attribute *hpsa_shost_attrs[] = { 940 &dev_attr_rescan, 941 &dev_attr_firmware_revision, 942 &dev_attr_commands_outstanding, 943 &dev_attr_transport_mode, 944 &dev_attr_resettable, 945 &dev_attr_hp_ssd_smart_path_status, 946 &dev_attr_raid_offload_debug, 947 &dev_attr_lockup_detected, 948 &dev_attr_ctlr_num, 949 &dev_attr_legacy_board, 950 NULL, 951 }; 952 953 #define HPSA_NRESERVED_CMDS (HPSA_CMDS_RESERVED_FOR_DRIVER +\ 954 HPSA_MAX_CONCURRENT_PASSTHRUS) 955 956 static struct scsi_host_template hpsa_driver_template = { 957 .module = THIS_MODULE, 958 .name = HPSA, 959 .proc_name = HPSA, 960 .queuecommand = hpsa_scsi_queue_command, 961 .scan_start = hpsa_scan_start, 962 .scan_finished = hpsa_scan_finished, 963 .change_queue_depth = hpsa_change_queue_depth, 964 .this_id = -1, 965 .eh_device_reset_handler = hpsa_eh_device_reset_handler, 966 .ioctl = hpsa_ioctl, 967 .slave_alloc = hpsa_slave_alloc, 968 .slave_configure = hpsa_slave_configure, 969 .slave_destroy = hpsa_slave_destroy, 970 #ifdef CONFIG_COMPAT 971 .compat_ioctl = hpsa_compat_ioctl, 972 #endif 973 .sdev_attrs = hpsa_sdev_attrs, 974 .shost_attrs = hpsa_shost_attrs, 975 .max_sectors = 2048, 976 .no_write_same = 1, 977 }; 978 979 static inline u32 next_command(struct ctlr_info *h, u8 q) 980 { 981 u32 a; 982 struct reply_queue_buffer *rq = &h->reply_queue[q]; 983 984 if (h->transMethod & CFGTBL_Trans_io_accel1) 985 return h->access.command_completed(h, q); 986 987 if (unlikely(!(h->transMethod & CFGTBL_Trans_Performant))) 988 return h->access.command_completed(h, q); 989 990 if ((rq->head[rq->current_entry] & 1) == rq->wraparound) { 991 a = rq->head[rq->current_entry]; 992 rq->current_entry++; 993 atomic_dec(&h->commands_outstanding); 994 } else { 995 a = FIFO_EMPTY; 996 } 997 /* Check for wraparound */ 998 if (rq->current_entry == h->max_commands) { 999 rq->current_entry = 0; 1000 rq->wraparound ^= 1; 1001 } 1002 return a; 1003 } 1004 1005 /* 1006 * There are some special bits in the bus address of the 1007 * command that we have to set for the controller to know 1008 * how to process the command: 1009 * 1010 * Normal performant mode: 1011 * bit 0: 1 means performant mode, 0 means simple mode. 1012 * bits 1-3 = block fetch table entry 1013 * bits 4-6 = command type (== 0) 1014 * 1015 * ioaccel1 mode: 1016 * bit 0 = "performant mode" bit. 1017 * bits 1-3 = block fetch table entry 1018 * bits 4-6 = command type (== 110) 1019 * (command type is needed because ioaccel1 mode 1020 * commands are submitted through the same register as normal 1021 * mode commands, so this is how the controller knows whether 1022 * the command is normal mode or ioaccel1 mode.) 1023 * 1024 * ioaccel2 mode: 1025 * bit 0 = "performant mode" bit. 1026 * bits 1-4 = block fetch table entry (note extra bit) 1027 * bits 4-6 = not needed, because ioaccel2 mode has 1028 * a separate special register for submitting commands. 1029 */ 1030 1031 /* 1032 * set_performant_mode: Modify the tag for cciss performant 1033 * set bit 0 for pull model, bits 3-1 for block fetch 1034 * register number 1035 */ 1036 #define DEFAULT_REPLY_QUEUE (-1) 1037 static void set_performant_mode(struct ctlr_info *h, struct CommandList *c, 1038 int reply_queue) 1039 { 1040 if (likely(h->transMethod & CFGTBL_Trans_Performant)) { 1041 c->busaddr |= 1 | (h->blockFetchTable[c->Header.SGList] << 1); 1042 if (unlikely(!h->msix_vectors)) 1043 return; 1044 c->Header.ReplyQueue = reply_queue; 1045 } 1046 } 1047 1048 static void set_ioaccel1_performant_mode(struct ctlr_info *h, 1049 struct CommandList *c, 1050 int reply_queue) 1051 { 1052 struct io_accel1_cmd *cp = &h->ioaccel_cmd_pool[c->cmdindex]; 1053 1054 /* 1055 * Tell the controller to post the reply to the queue for this 1056 * processor. This seems to give the best I/O throughput. 1057 */ 1058 cp->ReplyQueue = reply_queue; 1059 /* 1060 * Set the bits in the address sent down to include: 1061 * - performant mode bit (bit 0) 1062 * - pull count (bits 1-3) 1063 * - command type (bits 4-6) 1064 */ 1065 c->busaddr |= 1 | (h->ioaccel1_blockFetchTable[c->Header.SGList] << 1) | 1066 IOACCEL1_BUSADDR_CMDTYPE; 1067 } 1068 1069 static void set_ioaccel2_tmf_performant_mode(struct ctlr_info *h, 1070 struct CommandList *c, 1071 int reply_queue) 1072 { 1073 struct hpsa_tmf_struct *cp = (struct hpsa_tmf_struct *) 1074 &h->ioaccel2_cmd_pool[c->cmdindex]; 1075 1076 /* Tell the controller to post the reply to the queue for this 1077 * processor. This seems to give the best I/O throughput. 1078 */ 1079 cp->reply_queue = reply_queue; 1080 /* Set the bits in the address sent down to include: 1081 * - performant mode bit not used in ioaccel mode 2 1082 * - pull count (bits 0-3) 1083 * - command type isn't needed for ioaccel2 1084 */ 1085 c->busaddr |= h->ioaccel2_blockFetchTable[0]; 1086 } 1087 1088 static void set_ioaccel2_performant_mode(struct ctlr_info *h, 1089 struct CommandList *c, 1090 int reply_queue) 1091 { 1092 struct io_accel2_cmd *cp = &h->ioaccel2_cmd_pool[c->cmdindex]; 1093 1094 /* 1095 * Tell the controller to post the reply to the queue for this 1096 * processor. This seems to give the best I/O throughput. 1097 */ 1098 cp->reply_queue = reply_queue; 1099 /* 1100 * Set the bits in the address sent down to include: 1101 * - performant mode bit not used in ioaccel mode 2 1102 * - pull count (bits 0-3) 1103 * - command type isn't needed for ioaccel2 1104 */ 1105 c->busaddr |= (h->ioaccel2_blockFetchTable[cp->sg_count]); 1106 } 1107 1108 static int is_firmware_flash_cmd(u8 *cdb) 1109 { 1110 return cdb[0] == BMIC_WRITE && cdb[6] == BMIC_FLASH_FIRMWARE; 1111 } 1112 1113 /* 1114 * During firmware flash, the heartbeat register may not update as frequently 1115 * as it should. So we dial down lockup detection during firmware flash. and 1116 * dial it back up when firmware flash completes. 1117 */ 1118 #define HEARTBEAT_SAMPLE_INTERVAL_DURING_FLASH (240 * HZ) 1119 #define HEARTBEAT_SAMPLE_INTERVAL (30 * HZ) 1120 #define HPSA_EVENT_MONITOR_INTERVAL (15 * HZ) 1121 static void dial_down_lockup_detection_during_fw_flash(struct ctlr_info *h, 1122 struct CommandList *c) 1123 { 1124 if (!is_firmware_flash_cmd(c->Request.CDB)) 1125 return; 1126 atomic_inc(&h->firmware_flash_in_progress); 1127 h->heartbeat_sample_interval = HEARTBEAT_SAMPLE_INTERVAL_DURING_FLASH; 1128 } 1129 1130 static void dial_up_lockup_detection_on_fw_flash_complete(struct ctlr_info *h, 1131 struct CommandList *c) 1132 { 1133 if (is_firmware_flash_cmd(c->Request.CDB) && 1134 atomic_dec_and_test(&h->firmware_flash_in_progress)) 1135 h->heartbeat_sample_interval = HEARTBEAT_SAMPLE_INTERVAL; 1136 } 1137 1138 static void __enqueue_cmd_and_start_io(struct ctlr_info *h, 1139 struct CommandList *c, int reply_queue) 1140 { 1141 dial_down_lockup_detection_during_fw_flash(h, c); 1142 atomic_inc(&h->commands_outstanding); 1143 if (c->device) 1144 atomic_inc(&c->device->commands_outstanding); 1145 1146 reply_queue = h->reply_map[raw_smp_processor_id()]; 1147 switch (c->cmd_type) { 1148 case CMD_IOACCEL1: 1149 set_ioaccel1_performant_mode(h, c, reply_queue); 1150 writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET); 1151 break; 1152 case CMD_IOACCEL2: 1153 set_ioaccel2_performant_mode(h, c, reply_queue); 1154 writel(c->busaddr, h->vaddr + IOACCEL2_INBOUND_POSTQ_32); 1155 break; 1156 case IOACCEL2_TMF: 1157 set_ioaccel2_tmf_performant_mode(h, c, reply_queue); 1158 writel(c->busaddr, h->vaddr + IOACCEL2_INBOUND_POSTQ_32); 1159 break; 1160 default: 1161 set_performant_mode(h, c, reply_queue); 1162 h->access.submit_command(h, c); 1163 } 1164 } 1165 1166 static void enqueue_cmd_and_start_io(struct ctlr_info *h, struct CommandList *c) 1167 { 1168 __enqueue_cmd_and_start_io(h, c, DEFAULT_REPLY_QUEUE); 1169 } 1170 1171 static inline int is_hba_lunid(unsigned char scsi3addr[]) 1172 { 1173 return memcmp(scsi3addr, RAID_CTLR_LUNID, 8) == 0; 1174 } 1175 1176 static inline int is_scsi_rev_5(struct ctlr_info *h) 1177 { 1178 if (!h->hba_inquiry_data) 1179 return 0; 1180 if ((h->hba_inquiry_data[2] & 0x07) == 5) 1181 return 1; 1182 return 0; 1183 } 1184 1185 static int hpsa_find_target_lun(struct ctlr_info *h, 1186 unsigned char scsi3addr[], int bus, int *target, int *lun) 1187 { 1188 /* finds an unused bus, target, lun for a new physical device 1189 * assumes h->devlock is held 1190 */ 1191 int i, found = 0; 1192 DECLARE_BITMAP(lun_taken, HPSA_MAX_DEVICES); 1193 1194 bitmap_zero(lun_taken, HPSA_MAX_DEVICES); 1195 1196 for (i = 0; i < h->ndevices; i++) { 1197 if (h->dev[i]->bus == bus && h->dev[i]->target != -1) 1198 __set_bit(h->dev[i]->target, lun_taken); 1199 } 1200 1201 i = find_first_zero_bit(lun_taken, HPSA_MAX_DEVICES); 1202 if (i < HPSA_MAX_DEVICES) { 1203 /* *bus = 1; */ 1204 *target = i; 1205 *lun = 0; 1206 found = 1; 1207 } 1208 return !found; 1209 } 1210 1211 static void hpsa_show_dev_msg(const char *level, struct ctlr_info *h, 1212 struct hpsa_scsi_dev_t *dev, char *description) 1213 { 1214 #define LABEL_SIZE 25 1215 char label[LABEL_SIZE]; 1216 1217 if (h == NULL || h->pdev == NULL || h->scsi_host == NULL) 1218 return; 1219 1220 switch (dev->devtype) { 1221 case TYPE_RAID: 1222 snprintf(label, LABEL_SIZE, "controller"); 1223 break; 1224 case TYPE_ENCLOSURE: 1225 snprintf(label, LABEL_SIZE, "enclosure"); 1226 break; 1227 case TYPE_DISK: 1228 case TYPE_ZBC: 1229 if (dev->external) 1230 snprintf(label, LABEL_SIZE, "external"); 1231 else if (!is_logical_dev_addr_mode(dev->scsi3addr)) 1232 snprintf(label, LABEL_SIZE, "%s", 1233 raid_label[PHYSICAL_DRIVE]); 1234 else 1235 snprintf(label, LABEL_SIZE, "RAID-%s", 1236 dev->raid_level > RAID_UNKNOWN ? "?" : 1237 raid_label[dev->raid_level]); 1238 break; 1239 case TYPE_ROM: 1240 snprintf(label, LABEL_SIZE, "rom"); 1241 break; 1242 case TYPE_TAPE: 1243 snprintf(label, LABEL_SIZE, "tape"); 1244 break; 1245 case TYPE_MEDIUM_CHANGER: 1246 snprintf(label, LABEL_SIZE, "changer"); 1247 break; 1248 default: 1249 snprintf(label, LABEL_SIZE, "UNKNOWN"); 1250 break; 1251 } 1252 1253 dev_printk(level, &h->pdev->dev, 1254 "scsi %d:%d:%d:%d: %s %s %.8s %.16s %s SSDSmartPathCap%c En%c Exp=%d\n", 1255 h->scsi_host->host_no, dev->bus, dev->target, dev->lun, 1256 description, 1257 scsi_device_type(dev->devtype), 1258 dev->vendor, 1259 dev->model, 1260 label, 1261 dev->offload_config ? '+' : '-', 1262 dev->offload_to_be_enabled ? '+' : '-', 1263 dev->expose_device); 1264 } 1265 1266 /* Add an entry into h->dev[] array. */ 1267 static int hpsa_scsi_add_entry(struct ctlr_info *h, 1268 struct hpsa_scsi_dev_t *device, 1269 struct hpsa_scsi_dev_t *added[], int *nadded) 1270 { 1271 /* assumes h->devlock is held */ 1272 int n = h->ndevices; 1273 int i; 1274 unsigned char addr1[8], addr2[8]; 1275 struct hpsa_scsi_dev_t *sd; 1276 1277 if (n >= HPSA_MAX_DEVICES) { 1278 dev_err(&h->pdev->dev, "too many devices, some will be " 1279 "inaccessible.\n"); 1280 return -1; 1281 } 1282 1283 /* physical devices do not have lun or target assigned until now. */ 1284 if (device->lun != -1) 1285 /* Logical device, lun is already assigned. */ 1286 goto lun_assigned; 1287 1288 /* If this device a non-zero lun of a multi-lun device 1289 * byte 4 of the 8-byte LUN addr will contain the logical 1290 * unit no, zero otherwise. 1291 */ 1292 if (device->scsi3addr[4] == 0) { 1293 /* This is not a non-zero lun of a multi-lun device */ 1294 if (hpsa_find_target_lun(h, device->scsi3addr, 1295 device->bus, &device->target, &device->lun) != 0) 1296 return -1; 1297 goto lun_assigned; 1298 } 1299 1300 /* This is a non-zero lun of a multi-lun device. 1301 * Search through our list and find the device which 1302 * has the same 8 byte LUN address, excepting byte 4 and 5. 1303 * Assign the same bus and target for this new LUN. 1304 * Use the logical unit number from the firmware. 1305 */ 1306 memcpy(addr1, device->scsi3addr, 8); 1307 addr1[4] = 0; 1308 addr1[5] = 0; 1309 for (i = 0; i < n; i++) { 1310 sd = h->dev[i]; 1311 memcpy(addr2, sd->scsi3addr, 8); 1312 addr2[4] = 0; 1313 addr2[5] = 0; 1314 /* differ only in byte 4 and 5? */ 1315 if (memcmp(addr1, addr2, 8) == 0) { 1316 device->bus = sd->bus; 1317 device->target = sd->target; 1318 device->lun = device->scsi3addr[4]; 1319 break; 1320 } 1321 } 1322 if (device->lun == -1) { 1323 dev_warn(&h->pdev->dev, "physical device with no LUN=0," 1324 " suspect firmware bug or unsupported hardware " 1325 "configuration.\n"); 1326 return -1; 1327 } 1328 1329 lun_assigned: 1330 1331 h->dev[n] = device; 1332 h->ndevices++; 1333 added[*nadded] = device; 1334 (*nadded)++; 1335 hpsa_show_dev_msg(KERN_INFO, h, device, 1336 device->expose_device ? "added" : "masked"); 1337 return 0; 1338 } 1339 1340 /* 1341 * Called during a scan operation. 1342 * 1343 * Update an entry in h->dev[] array. 1344 */ 1345 static void hpsa_scsi_update_entry(struct ctlr_info *h, 1346 int entry, struct hpsa_scsi_dev_t *new_entry) 1347 { 1348 /* assumes h->devlock is held */ 1349 BUG_ON(entry < 0 || entry >= HPSA_MAX_DEVICES); 1350 1351 /* Raid level changed. */ 1352 h->dev[entry]->raid_level = new_entry->raid_level; 1353 1354 /* 1355 * ioacccel_handle may have changed for a dual domain disk 1356 */ 1357 h->dev[entry]->ioaccel_handle = new_entry->ioaccel_handle; 1358 1359 /* Raid offload parameters changed. Careful about the ordering. */ 1360 if (new_entry->offload_config && new_entry->offload_to_be_enabled) { 1361 /* 1362 * if drive is newly offload_enabled, we want to copy the 1363 * raid map data first. If previously offload_enabled and 1364 * offload_config were set, raid map data had better be 1365 * the same as it was before. If raid map data has changed 1366 * then it had better be the case that 1367 * h->dev[entry]->offload_enabled is currently 0. 1368 */ 1369 h->dev[entry]->raid_map = new_entry->raid_map; 1370 h->dev[entry]->ioaccel_handle = new_entry->ioaccel_handle; 1371 } 1372 if (new_entry->offload_to_be_enabled) { 1373 h->dev[entry]->ioaccel_handle = new_entry->ioaccel_handle; 1374 wmb(); /* set ioaccel_handle *before* hba_ioaccel_enabled */ 1375 } 1376 h->dev[entry]->hba_ioaccel_enabled = new_entry->hba_ioaccel_enabled; 1377 h->dev[entry]->offload_config = new_entry->offload_config; 1378 h->dev[entry]->offload_to_mirror = new_entry->offload_to_mirror; 1379 h->dev[entry]->queue_depth = new_entry->queue_depth; 1380 1381 /* 1382 * We can turn off ioaccel offload now, but need to delay turning 1383 * ioaccel on until we can update h->dev[entry]->phys_disk[], but we 1384 * can't do that until all the devices are updated. 1385 */ 1386 h->dev[entry]->offload_to_be_enabled = new_entry->offload_to_be_enabled; 1387 1388 /* 1389 * turn ioaccel off immediately if told to do so. 1390 */ 1391 if (!new_entry->offload_to_be_enabled) 1392 h->dev[entry]->offload_enabled = 0; 1393 1394 hpsa_show_dev_msg(KERN_INFO, h, h->dev[entry], "updated"); 1395 } 1396 1397 /* Replace an entry from h->dev[] array. */ 1398 static void hpsa_scsi_replace_entry(struct ctlr_info *h, 1399 int entry, struct hpsa_scsi_dev_t *new_entry, 1400 struct hpsa_scsi_dev_t *added[], int *nadded, 1401 struct hpsa_scsi_dev_t *removed[], int *nremoved) 1402 { 1403 /* assumes h->devlock is held */ 1404 BUG_ON(entry < 0 || entry >= HPSA_MAX_DEVICES); 1405 removed[*nremoved] = h->dev[entry]; 1406 (*nremoved)++; 1407 1408 /* 1409 * New physical devices won't have target/lun assigned yet 1410 * so we need to preserve the values in the slot we are replacing. 1411 */ 1412 if (new_entry->target == -1) { 1413 new_entry->target = h->dev[entry]->target; 1414 new_entry->lun = h->dev[entry]->lun; 1415 } 1416 1417 h->dev[entry] = new_entry; 1418 added[*nadded] = new_entry; 1419 (*nadded)++; 1420 1421 hpsa_show_dev_msg(KERN_INFO, h, new_entry, "replaced"); 1422 } 1423 1424 /* Remove an entry from h->dev[] array. */ 1425 static void hpsa_scsi_remove_entry(struct ctlr_info *h, int entry, 1426 struct hpsa_scsi_dev_t *removed[], int *nremoved) 1427 { 1428 /* assumes h->devlock is held */ 1429 int i; 1430 struct hpsa_scsi_dev_t *sd; 1431 1432 BUG_ON(entry < 0 || entry >= HPSA_MAX_DEVICES); 1433 1434 sd = h->dev[entry]; 1435 removed[*nremoved] = h->dev[entry]; 1436 (*nremoved)++; 1437 1438 for (i = entry; i < h->ndevices-1; i++) 1439 h->dev[i] = h->dev[i+1]; 1440 h->ndevices--; 1441 hpsa_show_dev_msg(KERN_INFO, h, sd, "removed"); 1442 } 1443 1444 #define SCSI3ADDR_EQ(a, b) ( \ 1445 (a)[7] == (b)[7] && \ 1446 (a)[6] == (b)[6] && \ 1447 (a)[5] == (b)[5] && \ 1448 (a)[4] == (b)[4] && \ 1449 (a)[3] == (b)[3] && \ 1450 (a)[2] == (b)[2] && \ 1451 (a)[1] == (b)[1] && \ 1452 (a)[0] == (b)[0]) 1453 1454 static void fixup_botched_add(struct ctlr_info *h, 1455 struct hpsa_scsi_dev_t *added) 1456 { 1457 /* called when scsi_add_device fails in order to re-adjust 1458 * h->dev[] to match the mid layer's view. 1459 */ 1460 unsigned long flags; 1461 int i, j; 1462 1463 spin_lock_irqsave(&h->lock, flags); 1464 for (i = 0; i < h->ndevices; i++) { 1465 if (h->dev[i] == added) { 1466 for (j = i; j < h->ndevices-1; j++) 1467 h->dev[j] = h->dev[j+1]; 1468 h->ndevices--; 1469 break; 1470 } 1471 } 1472 spin_unlock_irqrestore(&h->lock, flags); 1473 kfree(added); 1474 } 1475 1476 static inline int device_is_the_same(struct hpsa_scsi_dev_t *dev1, 1477 struct hpsa_scsi_dev_t *dev2) 1478 { 1479 /* we compare everything except lun and target as these 1480 * are not yet assigned. Compare parts likely 1481 * to differ first 1482 */ 1483 if (memcmp(dev1->scsi3addr, dev2->scsi3addr, 1484 sizeof(dev1->scsi3addr)) != 0) 1485 return 0; 1486 if (memcmp(dev1->device_id, dev2->device_id, 1487 sizeof(dev1->device_id)) != 0) 1488 return 0; 1489 if (memcmp(dev1->model, dev2->model, sizeof(dev1->model)) != 0) 1490 return 0; 1491 if (memcmp(dev1->vendor, dev2->vendor, sizeof(dev1->vendor)) != 0) 1492 return 0; 1493 if (dev1->devtype != dev2->devtype) 1494 return 0; 1495 if (dev1->bus != dev2->bus) 1496 return 0; 1497 return 1; 1498 } 1499 1500 static inline int device_updated(struct hpsa_scsi_dev_t *dev1, 1501 struct hpsa_scsi_dev_t *dev2) 1502 { 1503 /* Device attributes that can change, but don't mean 1504 * that the device is a different device, nor that the OS 1505 * needs to be told anything about the change. 1506 */ 1507 if (dev1->raid_level != dev2->raid_level) 1508 return 1; 1509 if (dev1->offload_config != dev2->offload_config) 1510 return 1; 1511 if (dev1->offload_to_be_enabled != dev2->offload_to_be_enabled) 1512 return 1; 1513 if (!is_logical_dev_addr_mode(dev1->scsi3addr)) 1514 if (dev1->queue_depth != dev2->queue_depth) 1515 return 1; 1516 /* 1517 * This can happen for dual domain devices. An active 1518 * path change causes the ioaccel handle to change 1519 * 1520 * for example note the handle differences between p0 and p1 1521 * Device WWN ,WWN hash,Handle 1522 * D016 p0|0x3 [02]P2E:01:01,0x5000C5005FC4DACA,0x9B5616,0x01030003 1523 * p1 0x5000C5005FC4DAC9,0x6798C0,0x00040004 1524 */ 1525 if (dev1->ioaccel_handle != dev2->ioaccel_handle) 1526 return 1; 1527 return 0; 1528 } 1529 1530 /* Find needle in haystack. If exact match found, return DEVICE_SAME, 1531 * and return needle location in *index. If scsi3addr matches, but not 1532 * vendor, model, serial num, etc. return DEVICE_CHANGED, and return needle 1533 * location in *index. 1534 * In the case of a minor device attribute change, such as RAID level, just 1535 * return DEVICE_UPDATED, along with the updated device's location in index. 1536 * If needle not found, return DEVICE_NOT_FOUND. 1537 */ 1538 static int hpsa_scsi_find_entry(struct hpsa_scsi_dev_t *needle, 1539 struct hpsa_scsi_dev_t *haystack[], int haystack_size, 1540 int *index) 1541 { 1542 int i; 1543 #define DEVICE_NOT_FOUND 0 1544 #define DEVICE_CHANGED 1 1545 #define DEVICE_SAME 2 1546 #define DEVICE_UPDATED 3 1547 if (needle == NULL) 1548 return DEVICE_NOT_FOUND; 1549 1550 for (i = 0; i < haystack_size; i++) { 1551 if (haystack[i] == NULL) /* previously removed. */ 1552 continue; 1553 if (SCSI3ADDR_EQ(needle->scsi3addr, haystack[i]->scsi3addr)) { 1554 *index = i; 1555 if (device_is_the_same(needle, haystack[i])) { 1556 if (device_updated(needle, haystack[i])) 1557 return DEVICE_UPDATED; 1558 return DEVICE_SAME; 1559 } else { 1560 /* Keep offline devices offline */ 1561 if (needle->volume_offline) 1562 return DEVICE_NOT_FOUND; 1563 return DEVICE_CHANGED; 1564 } 1565 } 1566 } 1567 *index = -1; 1568 return DEVICE_NOT_FOUND; 1569 } 1570 1571 static void hpsa_monitor_offline_device(struct ctlr_info *h, 1572 unsigned char scsi3addr[]) 1573 { 1574 struct offline_device_entry *device; 1575 unsigned long flags; 1576 1577 /* Check to see if device is already on the list */ 1578 spin_lock_irqsave(&h->offline_device_lock, flags); 1579 list_for_each_entry(device, &h->offline_device_list, offline_list) { 1580 if (memcmp(device->scsi3addr, scsi3addr, 1581 sizeof(device->scsi3addr)) == 0) { 1582 spin_unlock_irqrestore(&h->offline_device_lock, flags); 1583 return; 1584 } 1585 } 1586 spin_unlock_irqrestore(&h->offline_device_lock, flags); 1587 1588 /* Device is not on the list, add it. */ 1589 device = kmalloc(sizeof(*device), GFP_KERNEL); 1590 if (!device) 1591 return; 1592 1593 memcpy(device->scsi3addr, scsi3addr, sizeof(device->scsi3addr)); 1594 spin_lock_irqsave(&h->offline_device_lock, flags); 1595 list_add_tail(&device->offline_list, &h->offline_device_list); 1596 spin_unlock_irqrestore(&h->offline_device_lock, flags); 1597 } 1598 1599 /* Print a message explaining various offline volume states */ 1600 static void hpsa_show_volume_status(struct ctlr_info *h, 1601 struct hpsa_scsi_dev_t *sd) 1602 { 1603 if (sd->volume_offline == HPSA_VPD_LV_STATUS_UNSUPPORTED) 1604 dev_info(&h->pdev->dev, 1605 "C%d:B%d:T%d:L%d Volume status is not available through vital product data pages.\n", 1606 h->scsi_host->host_no, 1607 sd->bus, sd->target, sd->lun); 1608 switch (sd->volume_offline) { 1609 case HPSA_LV_OK: 1610 break; 1611 case HPSA_LV_UNDERGOING_ERASE: 1612 dev_info(&h->pdev->dev, 1613 "C%d:B%d:T%d:L%d Volume is undergoing background erase process.\n", 1614 h->scsi_host->host_no, 1615 sd->bus, sd->target, sd->lun); 1616 break; 1617 case HPSA_LV_NOT_AVAILABLE: 1618 dev_info(&h->pdev->dev, 1619 "C%d:B%d:T%d:L%d Volume is waiting for transforming volume.\n", 1620 h->scsi_host->host_no, 1621 sd->bus, sd->target, sd->lun); 1622 break; 1623 case HPSA_LV_UNDERGOING_RPI: 1624 dev_info(&h->pdev->dev, 1625 "C%d:B%d:T%d:L%d Volume is undergoing rapid parity init.\n", 1626 h->scsi_host->host_no, 1627 sd->bus, sd->target, sd->lun); 1628 break; 1629 case HPSA_LV_PENDING_RPI: 1630 dev_info(&h->pdev->dev, 1631 "C%d:B%d:T%d:L%d Volume is queued for rapid parity initialization process.\n", 1632 h->scsi_host->host_no, 1633 sd->bus, sd->target, sd->lun); 1634 break; 1635 case HPSA_LV_ENCRYPTED_NO_KEY: 1636 dev_info(&h->pdev->dev, 1637 "C%d:B%d:T%d:L%d Volume is encrypted and cannot be accessed because key is not present.\n", 1638 h->scsi_host->host_no, 1639 sd->bus, sd->target, sd->lun); 1640 break; 1641 case HPSA_LV_PLAINTEXT_IN_ENCRYPT_ONLY_CONTROLLER: 1642 dev_info(&h->pdev->dev, 1643 "C%d:B%d:T%d:L%d Volume is not encrypted and cannot be accessed because controller is in encryption-only mode.\n", 1644 h->scsi_host->host_no, 1645 sd->bus, sd->target, sd->lun); 1646 break; 1647 case HPSA_LV_UNDERGOING_ENCRYPTION: 1648 dev_info(&h->pdev->dev, 1649 "C%d:B%d:T%d:L%d Volume is undergoing encryption process.\n", 1650 h->scsi_host->host_no, 1651 sd->bus, sd->target, sd->lun); 1652 break; 1653 case HPSA_LV_UNDERGOING_ENCRYPTION_REKEYING: 1654 dev_info(&h->pdev->dev, 1655 "C%d:B%d:T%d:L%d Volume is undergoing encryption re-keying process.\n", 1656 h->scsi_host->host_no, 1657 sd->bus, sd->target, sd->lun); 1658 break; 1659 case HPSA_LV_ENCRYPTED_IN_NON_ENCRYPTED_CONTROLLER: 1660 dev_info(&h->pdev->dev, 1661 "C%d:B%d:T%d:L%d Volume is encrypted and cannot be accessed because controller does not have encryption enabled.\n", 1662 h->scsi_host->host_no, 1663 sd->bus, sd->target, sd->lun); 1664 break; 1665 case HPSA_LV_PENDING_ENCRYPTION: 1666 dev_info(&h->pdev->dev, 1667 "C%d:B%d:T%d:L%d Volume is pending migration to encrypted state, but process has not started.\n", 1668 h->scsi_host->host_no, 1669 sd->bus, sd->target, sd->lun); 1670 break; 1671 case HPSA_LV_PENDING_ENCRYPTION_REKEYING: 1672 dev_info(&h->pdev->dev, 1673 "C%d:B%d:T%d:L%d Volume is encrypted and is pending encryption rekeying.\n", 1674 h->scsi_host->host_no, 1675 sd->bus, sd->target, sd->lun); 1676 break; 1677 } 1678 } 1679 1680 /* 1681 * Figure the list of physical drive pointers for a logical drive with 1682 * raid offload configured. 1683 */ 1684 static void hpsa_figure_phys_disk_ptrs(struct ctlr_info *h, 1685 struct hpsa_scsi_dev_t *dev[], int ndevices, 1686 struct hpsa_scsi_dev_t *logical_drive) 1687 { 1688 struct raid_map_data *map = &logical_drive->raid_map; 1689 struct raid_map_disk_data *dd = &map->data[0]; 1690 int i, j; 1691 int total_disks_per_row = le16_to_cpu(map->data_disks_per_row) + 1692 le16_to_cpu(map->metadata_disks_per_row); 1693 int nraid_map_entries = le16_to_cpu(map->row_cnt) * 1694 le16_to_cpu(map->layout_map_count) * 1695 total_disks_per_row; 1696 int nphys_disk = le16_to_cpu(map->layout_map_count) * 1697 total_disks_per_row; 1698 int qdepth; 1699 1700 if (nraid_map_entries > RAID_MAP_MAX_ENTRIES) 1701 nraid_map_entries = RAID_MAP_MAX_ENTRIES; 1702 1703 logical_drive->nphysical_disks = nraid_map_entries; 1704 1705 qdepth = 0; 1706 for (i = 0; i < nraid_map_entries; i++) { 1707 logical_drive->phys_disk[i] = NULL; 1708 if (!logical_drive->offload_config) 1709 continue; 1710 for (j = 0; j < ndevices; j++) { 1711 if (dev[j] == NULL) 1712 continue; 1713 if (dev[j]->devtype != TYPE_DISK && 1714 dev[j]->devtype != TYPE_ZBC) 1715 continue; 1716 if (is_logical_device(dev[j])) 1717 continue; 1718 if (dev[j]->ioaccel_handle != dd[i].ioaccel_handle) 1719 continue; 1720 1721 logical_drive->phys_disk[i] = dev[j]; 1722 if (i < nphys_disk) 1723 qdepth = min(h->nr_cmds, qdepth + 1724 logical_drive->phys_disk[i]->queue_depth); 1725 break; 1726 } 1727 1728 /* 1729 * This can happen if a physical drive is removed and 1730 * the logical drive is degraded. In that case, the RAID 1731 * map data will refer to a physical disk which isn't actually 1732 * present. And in that case offload_enabled should already 1733 * be 0, but we'll turn it off here just in case 1734 */ 1735 if (!logical_drive->phys_disk[i]) { 1736 dev_warn(&h->pdev->dev, 1737 "%s: [%d:%d:%d:%d] A phys disk component of LV is missing, turning off offload_enabled for LV.\n", 1738 __func__, 1739 h->scsi_host->host_no, logical_drive->bus, 1740 logical_drive->target, logical_drive->lun); 1741 logical_drive->offload_enabled = 0; 1742 logical_drive->offload_to_be_enabled = 0; 1743 logical_drive->queue_depth = 8; 1744 } 1745 } 1746 if (nraid_map_entries) 1747 /* 1748 * This is correct for reads, too high for full stripe writes, 1749 * way too high for partial stripe writes 1750 */ 1751 logical_drive->queue_depth = qdepth; 1752 else { 1753 if (logical_drive->external) 1754 logical_drive->queue_depth = EXTERNAL_QD; 1755 else 1756 logical_drive->queue_depth = h->nr_cmds; 1757 } 1758 } 1759 1760 static void hpsa_update_log_drive_phys_drive_ptrs(struct ctlr_info *h, 1761 struct hpsa_scsi_dev_t *dev[], int ndevices) 1762 { 1763 int i; 1764 1765 for (i = 0; i < ndevices; i++) { 1766 if (dev[i] == NULL) 1767 continue; 1768 if (dev[i]->devtype != TYPE_DISK && 1769 dev[i]->devtype != TYPE_ZBC) 1770 continue; 1771 if (!is_logical_device(dev[i])) 1772 continue; 1773 1774 /* 1775 * If offload is currently enabled, the RAID map and 1776 * phys_disk[] assignment *better* not be changing 1777 * because we would be changing ioaccel phsy_disk[] pointers 1778 * on a ioaccel volume processing I/O requests. 1779 * 1780 * If an ioaccel volume status changed, initially because it was 1781 * re-configured and thus underwent a transformation, or 1782 * a drive failed, we would have received a state change 1783 * request and ioaccel should have been turned off. When the 1784 * transformation completes, we get another state change 1785 * request to turn ioaccel back on. In this case, we need 1786 * to update the ioaccel information. 1787 * 1788 * Thus: If it is not currently enabled, but will be after 1789 * the scan completes, make sure the ioaccel pointers 1790 * are up to date. 1791 */ 1792 1793 if (!dev[i]->offload_enabled && dev[i]->offload_to_be_enabled) 1794 hpsa_figure_phys_disk_ptrs(h, dev, ndevices, dev[i]); 1795 } 1796 } 1797 1798 static int hpsa_add_device(struct ctlr_info *h, struct hpsa_scsi_dev_t *device) 1799 { 1800 int rc = 0; 1801 1802 if (!h->scsi_host) 1803 return 1; 1804 1805 if (is_logical_device(device)) /* RAID */ 1806 rc = scsi_add_device(h->scsi_host, device->bus, 1807 device->target, device->lun); 1808 else /* HBA */ 1809 rc = hpsa_add_sas_device(h->sas_host, device); 1810 1811 return rc; 1812 } 1813 1814 static int hpsa_find_outstanding_commands_for_dev(struct ctlr_info *h, 1815 struct hpsa_scsi_dev_t *dev) 1816 { 1817 int i; 1818 int count = 0; 1819 1820 for (i = 0; i < h->nr_cmds; i++) { 1821 struct CommandList *c = h->cmd_pool + i; 1822 int refcount = atomic_inc_return(&c->refcount); 1823 1824 if (refcount > 1 && hpsa_cmd_dev_match(h, c, dev, 1825 dev->scsi3addr)) { 1826 unsigned long flags; 1827 1828 spin_lock_irqsave(&h->lock, flags); /* Implied MB */ 1829 if (!hpsa_is_cmd_idle(c)) 1830 ++count; 1831 spin_unlock_irqrestore(&h->lock, flags); 1832 } 1833 1834 cmd_free(h, c); 1835 } 1836 1837 return count; 1838 } 1839 1840 #define NUM_WAIT 20 1841 static void hpsa_wait_for_outstanding_commands_for_dev(struct ctlr_info *h, 1842 struct hpsa_scsi_dev_t *device) 1843 { 1844 int cmds = 0; 1845 int waits = 0; 1846 int num_wait = NUM_WAIT; 1847 1848 if (device->external) 1849 num_wait = HPSA_EH_PTRAID_TIMEOUT; 1850 1851 while (1) { 1852 cmds = hpsa_find_outstanding_commands_for_dev(h, device); 1853 if (cmds == 0) 1854 break; 1855 if (++waits > num_wait) 1856 break; 1857 msleep(1000); 1858 } 1859 1860 if (waits > num_wait) { 1861 dev_warn(&h->pdev->dev, 1862 "%s: removing device [%d:%d:%d:%d] with %d outstanding commands!\n", 1863 __func__, 1864 h->scsi_host->host_no, 1865 device->bus, device->target, device->lun, cmds); 1866 } 1867 } 1868 1869 static void hpsa_remove_device(struct ctlr_info *h, 1870 struct hpsa_scsi_dev_t *device) 1871 { 1872 struct scsi_device *sdev = NULL; 1873 1874 if (!h->scsi_host) 1875 return; 1876 1877 /* 1878 * Allow for commands to drain 1879 */ 1880 device->removed = 1; 1881 hpsa_wait_for_outstanding_commands_for_dev(h, device); 1882 1883 if (is_logical_device(device)) { /* RAID */ 1884 sdev = scsi_device_lookup(h->scsi_host, device->bus, 1885 device->target, device->lun); 1886 if (sdev) { 1887 scsi_remove_device(sdev); 1888 scsi_device_put(sdev); 1889 } else { 1890 /* 1891 * We don't expect to get here. Future commands 1892 * to this device will get a selection timeout as 1893 * if the device were gone. 1894 */ 1895 hpsa_show_dev_msg(KERN_WARNING, h, device, 1896 "didn't find device for removal."); 1897 } 1898 } else { /* HBA */ 1899 1900 hpsa_remove_sas_device(device); 1901 } 1902 } 1903 1904 static void adjust_hpsa_scsi_table(struct ctlr_info *h, 1905 struct hpsa_scsi_dev_t *sd[], int nsds) 1906 { 1907 /* sd contains scsi3 addresses and devtypes, and inquiry 1908 * data. This function takes what's in sd to be the current 1909 * reality and updates h->dev[] to reflect that reality. 1910 */ 1911 int i, entry, device_change, changes = 0; 1912 struct hpsa_scsi_dev_t *csd; 1913 unsigned long flags; 1914 struct hpsa_scsi_dev_t **added, **removed; 1915 int nadded, nremoved; 1916 1917 /* 1918 * A reset can cause a device status to change 1919 * re-schedule the scan to see what happened. 1920 */ 1921 spin_lock_irqsave(&h->reset_lock, flags); 1922 if (h->reset_in_progress) { 1923 h->drv_req_rescan = 1; 1924 spin_unlock_irqrestore(&h->reset_lock, flags); 1925 return; 1926 } 1927 spin_unlock_irqrestore(&h->reset_lock, flags); 1928 1929 added = kcalloc(HPSA_MAX_DEVICES, sizeof(*added), GFP_KERNEL); 1930 removed = kcalloc(HPSA_MAX_DEVICES, sizeof(*removed), GFP_KERNEL); 1931 1932 if (!added || !removed) { 1933 dev_warn(&h->pdev->dev, "out of memory in " 1934 "adjust_hpsa_scsi_table\n"); 1935 goto free_and_out; 1936 } 1937 1938 spin_lock_irqsave(&h->devlock, flags); 1939 1940 /* find any devices in h->dev[] that are not in 1941 * sd[] and remove them from h->dev[], and for any 1942 * devices which have changed, remove the old device 1943 * info and add the new device info. 1944 * If minor device attributes change, just update 1945 * the existing device structure. 1946 */ 1947 i = 0; 1948 nremoved = 0; 1949 nadded = 0; 1950 while (i < h->ndevices) { 1951 csd = h->dev[i]; 1952 device_change = hpsa_scsi_find_entry(csd, sd, nsds, &entry); 1953 if (device_change == DEVICE_NOT_FOUND) { 1954 changes++; 1955 hpsa_scsi_remove_entry(h, i, removed, &nremoved); 1956 continue; /* remove ^^^, hence i not incremented */ 1957 } else if (device_change == DEVICE_CHANGED) { 1958 changes++; 1959 hpsa_scsi_replace_entry(h, i, sd[entry], 1960 added, &nadded, removed, &nremoved); 1961 /* Set it to NULL to prevent it from being freed 1962 * at the bottom of hpsa_update_scsi_devices() 1963 */ 1964 sd[entry] = NULL; 1965 } else if (device_change == DEVICE_UPDATED) { 1966 hpsa_scsi_update_entry(h, i, sd[entry]); 1967 } 1968 i++; 1969 } 1970 1971 /* Now, make sure every device listed in sd[] is also 1972 * listed in h->dev[], adding them if they aren't found 1973 */ 1974 1975 for (i = 0; i < nsds; i++) { 1976 if (!sd[i]) /* if already added above. */ 1977 continue; 1978 1979 /* Don't add devices which are NOT READY, FORMAT IN PROGRESS 1980 * as the SCSI mid-layer does not handle such devices well. 1981 * It relentlessly loops sending TUR at 3Hz, then READ(10) 1982 * at 160Hz, and prevents the system from coming up. 1983 */ 1984 if (sd[i]->volume_offline) { 1985 hpsa_show_volume_status(h, sd[i]); 1986 hpsa_show_dev_msg(KERN_INFO, h, sd[i], "offline"); 1987 continue; 1988 } 1989 1990 device_change = hpsa_scsi_find_entry(sd[i], h->dev, 1991 h->ndevices, &entry); 1992 if (device_change == DEVICE_NOT_FOUND) { 1993 changes++; 1994 if (hpsa_scsi_add_entry(h, sd[i], added, &nadded) != 0) 1995 break; 1996 sd[i] = NULL; /* prevent from being freed later. */ 1997 } else if (device_change == DEVICE_CHANGED) { 1998 /* should never happen... */ 1999 changes++; 2000 dev_warn(&h->pdev->dev, 2001 "device unexpectedly changed.\n"); 2002 /* but if it does happen, we just ignore that device */ 2003 } 2004 } 2005 hpsa_update_log_drive_phys_drive_ptrs(h, h->dev, h->ndevices); 2006 2007 /* 2008 * Now that h->dev[]->phys_disk[] is coherent, we can enable 2009 * any logical drives that need it enabled. 2010 * 2011 * The raid map should be current by now. 2012 * 2013 * We are updating the device list used for I/O requests. 2014 */ 2015 for (i = 0; i < h->ndevices; i++) { 2016 if (h->dev[i] == NULL) 2017 continue; 2018 h->dev[i]->offload_enabled = h->dev[i]->offload_to_be_enabled; 2019 } 2020 2021 spin_unlock_irqrestore(&h->devlock, flags); 2022 2023 /* Monitor devices which are in one of several NOT READY states to be 2024 * brought online later. This must be done without holding h->devlock, 2025 * so don't touch h->dev[] 2026 */ 2027 for (i = 0; i < nsds; i++) { 2028 if (!sd[i]) /* if already added above. */ 2029 continue; 2030 if (sd[i]->volume_offline) 2031 hpsa_monitor_offline_device(h, sd[i]->scsi3addr); 2032 } 2033 2034 /* Don't notify scsi mid layer of any changes the first time through 2035 * (or if there are no changes) scsi_scan_host will do it later the 2036 * first time through. 2037 */ 2038 if (!changes) 2039 goto free_and_out; 2040 2041 /* Notify scsi mid layer of any removed devices */ 2042 for (i = 0; i < nremoved; i++) { 2043 if (removed[i] == NULL) 2044 continue; 2045 if (removed[i]->expose_device) 2046 hpsa_remove_device(h, removed[i]); 2047 kfree(removed[i]); 2048 removed[i] = NULL; 2049 } 2050 2051 /* Notify scsi mid layer of any added devices */ 2052 for (i = 0; i < nadded; i++) { 2053 int rc = 0; 2054 2055 if (added[i] == NULL) 2056 continue; 2057 if (!(added[i]->expose_device)) 2058 continue; 2059 rc = hpsa_add_device(h, added[i]); 2060 if (!rc) 2061 continue; 2062 dev_warn(&h->pdev->dev, 2063 "addition failed %d, device not added.", rc); 2064 /* now we have to remove it from h->dev, 2065 * since it didn't get added to scsi mid layer 2066 */ 2067 fixup_botched_add(h, added[i]); 2068 h->drv_req_rescan = 1; 2069 } 2070 2071 free_and_out: 2072 kfree(added); 2073 kfree(removed); 2074 } 2075 2076 /* 2077 * Lookup bus/target/lun and return corresponding struct hpsa_scsi_dev_t * 2078 * Assume's h->devlock is held. 2079 */ 2080 static struct hpsa_scsi_dev_t *lookup_hpsa_scsi_dev(struct ctlr_info *h, 2081 int bus, int target, int lun) 2082 { 2083 int i; 2084 struct hpsa_scsi_dev_t *sd; 2085 2086 for (i = 0; i < h->ndevices; i++) { 2087 sd = h->dev[i]; 2088 if (sd->bus == bus && sd->target == target && sd->lun == lun) 2089 return sd; 2090 } 2091 return NULL; 2092 } 2093 2094 static int hpsa_slave_alloc(struct scsi_device *sdev) 2095 { 2096 struct hpsa_scsi_dev_t *sd = NULL; 2097 unsigned long flags; 2098 struct ctlr_info *h; 2099 2100 h = sdev_to_hba(sdev); 2101 spin_lock_irqsave(&h->devlock, flags); 2102 if (sdev_channel(sdev) == HPSA_PHYSICAL_DEVICE_BUS) { 2103 struct scsi_target *starget; 2104 struct sas_rphy *rphy; 2105 2106 starget = scsi_target(sdev); 2107 rphy = target_to_rphy(starget); 2108 sd = hpsa_find_device_by_sas_rphy(h, rphy); 2109 if (sd) { 2110 sd->target = sdev_id(sdev); 2111 sd->lun = sdev->lun; 2112 } 2113 } 2114 if (!sd) 2115 sd = lookup_hpsa_scsi_dev(h, sdev_channel(sdev), 2116 sdev_id(sdev), sdev->lun); 2117 2118 if (sd && sd->expose_device) { 2119 atomic_set(&sd->ioaccel_cmds_out, 0); 2120 sdev->hostdata = sd; 2121 } else 2122 sdev->hostdata = NULL; 2123 spin_unlock_irqrestore(&h->devlock, flags); 2124 return 0; 2125 } 2126 2127 /* configure scsi device based on internal per-device structure */ 2128 static int hpsa_slave_configure(struct scsi_device *sdev) 2129 { 2130 struct hpsa_scsi_dev_t *sd; 2131 int queue_depth; 2132 2133 sd = sdev->hostdata; 2134 sdev->no_uld_attach = !sd || !sd->expose_device; 2135 2136 if (sd) { 2137 sd->was_removed = 0; 2138 if (sd->external) { 2139 queue_depth = EXTERNAL_QD; 2140 sdev->eh_timeout = HPSA_EH_PTRAID_TIMEOUT; 2141 blk_queue_rq_timeout(sdev->request_queue, 2142 HPSA_EH_PTRAID_TIMEOUT); 2143 } else { 2144 queue_depth = sd->queue_depth != 0 ? 2145 sd->queue_depth : sdev->host->can_queue; 2146 } 2147 } else 2148 queue_depth = sdev->host->can_queue; 2149 2150 scsi_change_queue_depth(sdev, queue_depth); 2151 2152 return 0; 2153 } 2154 2155 static void hpsa_slave_destroy(struct scsi_device *sdev) 2156 { 2157 struct hpsa_scsi_dev_t *hdev = NULL; 2158 2159 hdev = sdev->hostdata; 2160 2161 if (hdev) 2162 hdev->was_removed = 1; 2163 } 2164 2165 static void hpsa_free_ioaccel2_sg_chain_blocks(struct ctlr_info *h) 2166 { 2167 int i; 2168 2169 if (!h->ioaccel2_cmd_sg_list) 2170 return; 2171 for (i = 0; i < h->nr_cmds; i++) { 2172 kfree(h->ioaccel2_cmd_sg_list[i]); 2173 h->ioaccel2_cmd_sg_list[i] = NULL; 2174 } 2175 kfree(h->ioaccel2_cmd_sg_list); 2176 h->ioaccel2_cmd_sg_list = NULL; 2177 } 2178 2179 static int hpsa_allocate_ioaccel2_sg_chain_blocks(struct ctlr_info *h) 2180 { 2181 int i; 2182 2183 if (h->chainsize <= 0) 2184 return 0; 2185 2186 h->ioaccel2_cmd_sg_list = 2187 kcalloc(h->nr_cmds, sizeof(*h->ioaccel2_cmd_sg_list), 2188 GFP_KERNEL); 2189 if (!h->ioaccel2_cmd_sg_list) 2190 return -ENOMEM; 2191 for (i = 0; i < h->nr_cmds; i++) { 2192 h->ioaccel2_cmd_sg_list[i] = 2193 kmalloc_array(h->maxsgentries, 2194 sizeof(*h->ioaccel2_cmd_sg_list[i]), 2195 GFP_KERNEL); 2196 if (!h->ioaccel2_cmd_sg_list[i]) 2197 goto clean; 2198 } 2199 return 0; 2200 2201 clean: 2202 hpsa_free_ioaccel2_sg_chain_blocks(h); 2203 return -ENOMEM; 2204 } 2205 2206 static void hpsa_free_sg_chain_blocks(struct ctlr_info *h) 2207 { 2208 int i; 2209 2210 if (!h->cmd_sg_list) 2211 return; 2212 for (i = 0; i < h->nr_cmds; i++) { 2213 kfree(h->cmd_sg_list[i]); 2214 h->cmd_sg_list[i] = NULL; 2215 } 2216 kfree(h->cmd_sg_list); 2217 h->cmd_sg_list = NULL; 2218 } 2219 2220 static int hpsa_alloc_sg_chain_blocks(struct ctlr_info *h) 2221 { 2222 int i; 2223 2224 if (h->chainsize <= 0) 2225 return 0; 2226 2227 h->cmd_sg_list = kcalloc(h->nr_cmds, sizeof(*h->cmd_sg_list), 2228 GFP_KERNEL); 2229 if (!h->cmd_sg_list) 2230 return -ENOMEM; 2231 2232 for (i = 0; i < h->nr_cmds; i++) { 2233 h->cmd_sg_list[i] = kmalloc_array(h->chainsize, 2234 sizeof(*h->cmd_sg_list[i]), 2235 GFP_KERNEL); 2236 if (!h->cmd_sg_list[i]) 2237 goto clean; 2238 2239 } 2240 return 0; 2241 2242 clean: 2243 hpsa_free_sg_chain_blocks(h); 2244 return -ENOMEM; 2245 } 2246 2247 static int hpsa_map_ioaccel2_sg_chain_block(struct ctlr_info *h, 2248 struct io_accel2_cmd *cp, struct CommandList *c) 2249 { 2250 struct ioaccel2_sg_element *chain_block; 2251 u64 temp64; 2252 u32 chain_size; 2253 2254 chain_block = h->ioaccel2_cmd_sg_list[c->cmdindex]; 2255 chain_size = le32_to_cpu(cp->sg[0].length); 2256 temp64 = dma_map_single(&h->pdev->dev, chain_block, chain_size, 2257 DMA_TO_DEVICE); 2258 if (dma_mapping_error(&h->pdev->dev, temp64)) { 2259 /* prevent subsequent unmapping */ 2260 cp->sg->address = 0; 2261 return -1; 2262 } 2263 cp->sg->address = cpu_to_le64(temp64); 2264 return 0; 2265 } 2266 2267 static void hpsa_unmap_ioaccel2_sg_chain_block(struct ctlr_info *h, 2268 struct io_accel2_cmd *cp) 2269 { 2270 struct ioaccel2_sg_element *chain_sg; 2271 u64 temp64; 2272 u32 chain_size; 2273 2274 chain_sg = cp->sg; 2275 temp64 = le64_to_cpu(chain_sg->address); 2276 chain_size = le32_to_cpu(cp->sg[0].length); 2277 dma_unmap_single(&h->pdev->dev, temp64, chain_size, DMA_TO_DEVICE); 2278 } 2279 2280 static int hpsa_map_sg_chain_block(struct ctlr_info *h, 2281 struct CommandList *c) 2282 { 2283 struct SGDescriptor *chain_sg, *chain_block; 2284 u64 temp64; 2285 u32 chain_len; 2286 2287 chain_sg = &c->SG[h->max_cmd_sg_entries - 1]; 2288 chain_block = h->cmd_sg_list[c->cmdindex]; 2289 chain_sg->Ext = cpu_to_le32(HPSA_SG_CHAIN); 2290 chain_len = sizeof(*chain_sg) * 2291 (le16_to_cpu(c->Header.SGTotal) - h->max_cmd_sg_entries); 2292 chain_sg->Len = cpu_to_le32(chain_len); 2293 temp64 = dma_map_single(&h->pdev->dev, chain_block, chain_len, 2294 DMA_TO_DEVICE); 2295 if (dma_mapping_error(&h->pdev->dev, temp64)) { 2296 /* prevent subsequent unmapping */ 2297 chain_sg->Addr = cpu_to_le64(0); 2298 return -1; 2299 } 2300 chain_sg->Addr = cpu_to_le64(temp64); 2301 return 0; 2302 } 2303 2304 static void hpsa_unmap_sg_chain_block(struct ctlr_info *h, 2305 struct CommandList *c) 2306 { 2307 struct SGDescriptor *chain_sg; 2308 2309 if (le16_to_cpu(c->Header.SGTotal) <= h->max_cmd_sg_entries) 2310 return; 2311 2312 chain_sg = &c->SG[h->max_cmd_sg_entries - 1]; 2313 dma_unmap_single(&h->pdev->dev, le64_to_cpu(chain_sg->Addr), 2314 le32_to_cpu(chain_sg->Len), DMA_TO_DEVICE); 2315 } 2316 2317 2318 /* Decode the various types of errors on ioaccel2 path. 2319 * Return 1 for any error that should generate a RAID path retry. 2320 * Return 0 for errors that don't require a RAID path retry. 2321 */ 2322 static int handle_ioaccel_mode2_error(struct ctlr_info *h, 2323 struct CommandList *c, 2324 struct scsi_cmnd *cmd, 2325 struct io_accel2_cmd *c2, 2326 struct hpsa_scsi_dev_t *dev) 2327 { 2328 int data_len; 2329 int retry = 0; 2330 u32 ioaccel2_resid = 0; 2331 2332 switch (c2->error_data.serv_response) { 2333 case IOACCEL2_SERV_RESPONSE_COMPLETE: 2334 switch (c2->error_data.status) { 2335 case IOACCEL2_STATUS_SR_TASK_COMP_GOOD: 2336 if (cmd) 2337 cmd->result = 0; 2338 break; 2339 case IOACCEL2_STATUS_SR_TASK_COMP_CHK_COND: 2340 cmd->result |= SAM_STAT_CHECK_CONDITION; 2341 if (c2->error_data.data_present != 2342 IOACCEL2_SENSE_DATA_PRESENT) { 2343 memset(cmd->sense_buffer, 0, 2344 SCSI_SENSE_BUFFERSIZE); 2345 break; 2346 } 2347 /* copy the sense data */ 2348 data_len = c2->error_data.sense_data_len; 2349 if (data_len > SCSI_SENSE_BUFFERSIZE) 2350 data_len = SCSI_SENSE_BUFFERSIZE; 2351 if (data_len > sizeof(c2->error_data.sense_data_buff)) 2352 data_len = 2353 sizeof(c2->error_data.sense_data_buff); 2354 memcpy(cmd->sense_buffer, 2355 c2->error_data.sense_data_buff, data_len); 2356 retry = 1; 2357 break; 2358 case IOACCEL2_STATUS_SR_TASK_COMP_BUSY: 2359 retry = 1; 2360 break; 2361 case IOACCEL2_STATUS_SR_TASK_COMP_RES_CON: 2362 retry = 1; 2363 break; 2364 case IOACCEL2_STATUS_SR_TASK_COMP_SET_FULL: 2365 retry = 1; 2366 break; 2367 case IOACCEL2_STATUS_SR_TASK_COMP_ABORTED: 2368 retry = 1; 2369 break; 2370 default: 2371 retry = 1; 2372 break; 2373 } 2374 break; 2375 case IOACCEL2_SERV_RESPONSE_FAILURE: 2376 switch (c2->error_data.status) { 2377 case IOACCEL2_STATUS_SR_IO_ERROR: 2378 case IOACCEL2_STATUS_SR_IO_ABORTED: 2379 case IOACCEL2_STATUS_SR_OVERRUN: 2380 retry = 1; 2381 break; 2382 case IOACCEL2_STATUS_SR_UNDERRUN: 2383 cmd->result = (DID_OK << 16); /* host byte */ 2384 cmd->result |= (COMMAND_COMPLETE << 8); /* msg byte */ 2385 ioaccel2_resid = get_unaligned_le32( 2386 &c2->error_data.resid_cnt[0]); 2387 scsi_set_resid(cmd, ioaccel2_resid); 2388 break; 2389 case IOACCEL2_STATUS_SR_NO_PATH_TO_DEVICE: 2390 case IOACCEL2_STATUS_SR_INVALID_DEVICE: 2391 case IOACCEL2_STATUS_SR_IOACCEL_DISABLED: 2392 /* 2393 * Did an HBA disk disappear? We will eventually 2394 * get a state change event from the controller but 2395 * in the meantime, we need to tell the OS that the 2396 * HBA disk is no longer there and stop I/O 2397 * from going down. This allows the potential re-insert 2398 * of the disk to get the same device node. 2399 */ 2400 if (dev->physical_device && dev->expose_device) { 2401 cmd->result = DID_NO_CONNECT << 16; 2402 dev->removed = 1; 2403 h->drv_req_rescan = 1; 2404 dev_warn(&h->pdev->dev, 2405 "%s: device is gone!\n", __func__); 2406 } else 2407 /* 2408 * Retry by sending down the RAID path. 2409 * We will get an event from ctlr to 2410 * trigger rescan regardless. 2411 */ 2412 retry = 1; 2413 break; 2414 default: 2415 retry = 1; 2416 } 2417 break; 2418 case IOACCEL2_SERV_RESPONSE_TMF_COMPLETE: 2419 break; 2420 case IOACCEL2_SERV_RESPONSE_TMF_SUCCESS: 2421 break; 2422 case IOACCEL2_SERV_RESPONSE_TMF_REJECTED: 2423 retry = 1; 2424 break; 2425 case IOACCEL2_SERV_RESPONSE_TMF_WRONG_LUN: 2426 break; 2427 default: 2428 retry = 1; 2429 break; 2430 } 2431 2432 if (dev->in_reset) 2433 retry = 0; 2434 2435 return retry; /* retry on raid path? */ 2436 } 2437 2438 static void hpsa_cmd_resolve_events(struct ctlr_info *h, 2439 struct CommandList *c) 2440 { 2441 struct hpsa_scsi_dev_t *dev = c->device; 2442 2443 /* 2444 * Reset c->scsi_cmd here so that the reset handler will know 2445 * this command has completed. Then, check to see if the handler is 2446 * waiting for this command, and, if so, wake it. 2447 */ 2448 c->scsi_cmd = SCSI_CMD_IDLE; 2449 mb(); /* Declare command idle before checking for pending events. */ 2450 if (dev) { 2451 atomic_dec(&dev->commands_outstanding); 2452 if (dev->in_reset && 2453 atomic_read(&dev->commands_outstanding) <= 0) 2454 wake_up_all(&h->event_sync_wait_queue); 2455 } 2456 } 2457 2458 static void hpsa_cmd_resolve_and_free(struct ctlr_info *h, 2459 struct CommandList *c) 2460 { 2461 hpsa_cmd_resolve_events(h, c); 2462 cmd_tagged_free(h, c); 2463 } 2464 2465 static void hpsa_cmd_free_and_done(struct ctlr_info *h, 2466 struct CommandList *c, struct scsi_cmnd *cmd) 2467 { 2468 hpsa_cmd_resolve_and_free(h, c); 2469 if (cmd && cmd->scsi_done) 2470 cmd->scsi_done(cmd); 2471 } 2472 2473 static void hpsa_retry_cmd(struct ctlr_info *h, struct CommandList *c) 2474 { 2475 INIT_WORK(&c->work, hpsa_command_resubmit_worker); 2476 queue_work_on(raw_smp_processor_id(), h->resubmit_wq, &c->work); 2477 } 2478 2479 static void process_ioaccel2_completion(struct ctlr_info *h, 2480 struct CommandList *c, struct scsi_cmnd *cmd, 2481 struct hpsa_scsi_dev_t *dev) 2482 { 2483 struct io_accel2_cmd *c2 = &h->ioaccel2_cmd_pool[c->cmdindex]; 2484 2485 /* check for good status */ 2486 if (likely(c2->error_data.serv_response == 0 && 2487 c2->error_data.status == 0)) { 2488 cmd->result = 0; 2489 return hpsa_cmd_free_and_done(h, c, cmd); 2490 } 2491 2492 /* 2493 * Any RAID offload error results in retry which will use 2494 * the normal I/O path so the controller can handle whatever is 2495 * wrong. 2496 */ 2497 if (is_logical_device(dev) && 2498 c2->error_data.serv_response == 2499 IOACCEL2_SERV_RESPONSE_FAILURE) { 2500 if (c2->error_data.status == 2501 IOACCEL2_STATUS_SR_IOACCEL_DISABLED) { 2502 dev->offload_enabled = 0; 2503 dev->offload_to_be_enabled = 0; 2504 } 2505 2506 if (dev->in_reset) { 2507 cmd->result = DID_RESET << 16; 2508 return hpsa_cmd_free_and_done(h, c, cmd); 2509 } 2510 2511 return hpsa_retry_cmd(h, c); 2512 } 2513 2514 if (handle_ioaccel_mode2_error(h, c, cmd, c2, dev)) 2515 return hpsa_retry_cmd(h, c); 2516 2517 return hpsa_cmd_free_and_done(h, c, cmd); 2518 } 2519 2520 /* Returns 0 on success, < 0 otherwise. */ 2521 static int hpsa_evaluate_tmf_status(struct ctlr_info *h, 2522 struct CommandList *cp) 2523 { 2524 u8 tmf_status = cp->err_info->ScsiStatus; 2525 2526 switch (tmf_status) { 2527 case CISS_TMF_COMPLETE: 2528 /* 2529 * CISS_TMF_COMPLETE never happens, instead, 2530 * ei->CommandStatus == 0 for this case. 2531 */ 2532 case CISS_TMF_SUCCESS: 2533 return 0; 2534 case CISS_TMF_INVALID_FRAME: 2535 case CISS_TMF_NOT_SUPPORTED: 2536 case CISS_TMF_FAILED: 2537 case CISS_TMF_WRONG_LUN: 2538 case CISS_TMF_OVERLAPPED_TAG: 2539 break; 2540 default: 2541 dev_warn(&h->pdev->dev, "Unknown TMF status: 0x%02x\n", 2542 tmf_status); 2543 break; 2544 } 2545 return -tmf_status; 2546 } 2547 2548 static void complete_scsi_command(struct CommandList *cp) 2549 { 2550 struct scsi_cmnd *cmd; 2551 struct ctlr_info *h; 2552 struct ErrorInfo *ei; 2553 struct hpsa_scsi_dev_t *dev; 2554 struct io_accel2_cmd *c2; 2555 2556 u8 sense_key; 2557 u8 asc; /* additional sense code */ 2558 u8 ascq; /* additional sense code qualifier */ 2559 unsigned long sense_data_size; 2560 2561 ei = cp->err_info; 2562 cmd = cp->scsi_cmd; 2563 h = cp->h; 2564 2565 if (!cmd->device) { 2566 cmd->result = DID_NO_CONNECT << 16; 2567 return hpsa_cmd_free_and_done(h, cp, cmd); 2568 } 2569 2570 dev = cmd->device->hostdata; 2571 if (!dev) { 2572 cmd->result = DID_NO_CONNECT << 16; 2573 return hpsa_cmd_free_and_done(h, cp, cmd); 2574 } 2575 c2 = &h->ioaccel2_cmd_pool[cp->cmdindex]; 2576 2577 scsi_dma_unmap(cmd); /* undo the DMA mappings */ 2578 if ((cp->cmd_type == CMD_SCSI) && 2579 (le16_to_cpu(cp->Header.SGTotal) > h->max_cmd_sg_entries)) 2580 hpsa_unmap_sg_chain_block(h, cp); 2581 2582 if ((cp->cmd_type == CMD_IOACCEL2) && 2583 (c2->sg[0].chain_indicator == IOACCEL2_CHAIN)) 2584 hpsa_unmap_ioaccel2_sg_chain_block(h, c2); 2585 2586 cmd->result = (DID_OK << 16); /* host byte */ 2587 cmd->result |= (COMMAND_COMPLETE << 8); /* msg byte */ 2588 2589 /* SCSI command has already been cleaned up in SML */ 2590 if (dev->was_removed) { 2591 hpsa_cmd_resolve_and_free(h, cp); 2592 return; 2593 } 2594 2595 if (cp->cmd_type == CMD_IOACCEL2 || cp->cmd_type == CMD_IOACCEL1) { 2596 if (dev->physical_device && dev->expose_device && 2597 dev->removed) { 2598 cmd->result = DID_NO_CONNECT << 16; 2599 return hpsa_cmd_free_and_done(h, cp, cmd); 2600 } 2601 if (likely(cp->phys_disk != NULL)) 2602 atomic_dec(&cp->phys_disk->ioaccel_cmds_out); 2603 } 2604 2605 /* 2606 * We check for lockup status here as it may be set for 2607 * CMD_SCSI, CMD_IOACCEL1 and CMD_IOACCEL2 commands by 2608 * fail_all_oustanding_cmds() 2609 */ 2610 if (unlikely(ei->CommandStatus == CMD_CTLR_LOCKUP)) { 2611 /* DID_NO_CONNECT will prevent a retry */ 2612 cmd->result = DID_NO_CONNECT << 16; 2613 return hpsa_cmd_free_and_done(h, cp, cmd); 2614 } 2615 2616 if (cp->cmd_type == CMD_IOACCEL2) 2617 return process_ioaccel2_completion(h, cp, cmd, dev); 2618 2619 scsi_set_resid(cmd, ei->ResidualCnt); 2620 if (ei->CommandStatus == 0) 2621 return hpsa_cmd_free_and_done(h, cp, cmd); 2622 2623 /* For I/O accelerator commands, copy over some fields to the normal 2624 * CISS header used below for error handling. 2625 */ 2626 if (cp->cmd_type == CMD_IOACCEL1) { 2627 struct io_accel1_cmd *c = &h->ioaccel_cmd_pool[cp->cmdindex]; 2628 cp->Header.SGList = scsi_sg_count(cmd); 2629 cp->Header.SGTotal = cpu_to_le16(cp->Header.SGList); 2630 cp->Request.CDBLen = le16_to_cpu(c->io_flags) & 2631 IOACCEL1_IOFLAGS_CDBLEN_MASK; 2632 cp->Header.tag = c->tag; 2633 memcpy(cp->Header.LUN.LunAddrBytes, c->CISS_LUN, 8); 2634 memcpy(cp->Request.CDB, c->CDB, cp->Request.CDBLen); 2635 2636 /* Any RAID offload error results in retry which will use 2637 * the normal I/O path so the controller can handle whatever's 2638 * wrong. 2639 */ 2640 if (is_logical_device(dev)) { 2641 if (ei->CommandStatus == CMD_IOACCEL_DISABLED) 2642 dev->offload_enabled = 0; 2643 return hpsa_retry_cmd(h, cp); 2644 } 2645 } 2646 2647 /* an error has occurred */ 2648 switch (ei->CommandStatus) { 2649 2650 case CMD_TARGET_STATUS: 2651 cmd->result |= ei->ScsiStatus; 2652 /* copy the sense data */ 2653 if (SCSI_SENSE_BUFFERSIZE < sizeof(ei->SenseInfo)) 2654 sense_data_size = SCSI_SENSE_BUFFERSIZE; 2655 else 2656 sense_data_size = sizeof(ei->SenseInfo); 2657 if (ei->SenseLen < sense_data_size) 2658 sense_data_size = ei->SenseLen; 2659 memcpy(cmd->sense_buffer, ei->SenseInfo, sense_data_size); 2660 if (ei->ScsiStatus) 2661 decode_sense_data(ei->SenseInfo, sense_data_size, 2662 &sense_key, &asc, &ascq); 2663 if (ei->ScsiStatus == SAM_STAT_CHECK_CONDITION) { 2664 switch (sense_key) { 2665 case ABORTED_COMMAND: 2666 cmd->result |= DID_SOFT_ERROR << 16; 2667 break; 2668 case UNIT_ATTENTION: 2669 if (asc == 0x3F && ascq == 0x0E) 2670 h->drv_req_rescan = 1; 2671 break; 2672 case ILLEGAL_REQUEST: 2673 if (asc == 0x25 && ascq == 0x00) { 2674 dev->removed = 1; 2675 cmd->result = DID_NO_CONNECT << 16; 2676 } 2677 break; 2678 } 2679 break; 2680 } 2681 /* Problem was not a check condition 2682 * Pass it up to the upper layers... 2683 */ 2684 if (ei->ScsiStatus) { 2685 dev_warn(&h->pdev->dev, "cp %p has status 0x%x " 2686 "Sense: 0x%x, ASC: 0x%x, ASCQ: 0x%x, " 2687 "Returning result: 0x%x\n", 2688 cp, ei->ScsiStatus, 2689 sense_key, asc, ascq, 2690 cmd->result); 2691 } else { /* scsi status is zero??? How??? */ 2692 dev_warn(&h->pdev->dev, "cp %p SCSI status was 0. " 2693 "Returning no connection.\n", cp), 2694 2695 /* Ordinarily, this case should never happen, 2696 * but there is a bug in some released firmware 2697 * revisions that allows it to happen if, for 2698 * example, a 4100 backplane loses power and 2699 * the tape drive is in it. We assume that 2700 * it's a fatal error of some kind because we 2701 * can't show that it wasn't. We will make it 2702 * look like selection timeout since that is 2703 * the most common reason for this to occur, 2704 * and it's severe enough. 2705 */ 2706 2707 cmd->result = DID_NO_CONNECT << 16; 2708 } 2709 break; 2710 2711 case CMD_DATA_UNDERRUN: /* let mid layer handle it. */ 2712 break; 2713 case CMD_DATA_OVERRUN: 2714 dev_warn(&h->pdev->dev, 2715 "CDB %16phN data overrun\n", cp->Request.CDB); 2716 break; 2717 case CMD_INVALID: { 2718 /* print_bytes(cp, sizeof(*cp), 1, 0); 2719 print_cmd(cp); */ 2720 /* We get CMD_INVALID if you address a non-existent device 2721 * instead of a selection timeout (no response). You will 2722 * see this if you yank out a drive, then try to access it. 2723 * This is kind of a shame because it means that any other 2724 * CMD_INVALID (e.g. driver bug) will get interpreted as a 2725 * missing target. */ 2726 cmd->result = DID_NO_CONNECT << 16; 2727 } 2728 break; 2729 case CMD_PROTOCOL_ERR: 2730 cmd->result = DID_ERROR << 16; 2731 dev_warn(&h->pdev->dev, "CDB %16phN : protocol error\n", 2732 cp->Request.CDB); 2733 break; 2734 case CMD_HARDWARE_ERR: 2735 cmd->result = DID_ERROR << 16; 2736 dev_warn(&h->pdev->dev, "CDB %16phN : hardware error\n", 2737 cp->Request.CDB); 2738 break; 2739 case CMD_CONNECTION_LOST: 2740 cmd->result = DID_ERROR << 16; 2741 dev_warn(&h->pdev->dev, "CDB %16phN : connection lost\n", 2742 cp->Request.CDB); 2743 break; 2744 case CMD_ABORTED: 2745 cmd->result = DID_ABORT << 16; 2746 break; 2747 case CMD_ABORT_FAILED: 2748 cmd->result = DID_ERROR << 16; 2749 dev_warn(&h->pdev->dev, "CDB %16phN : abort failed\n", 2750 cp->Request.CDB); 2751 break; 2752 case CMD_UNSOLICITED_ABORT: 2753 cmd->result = DID_SOFT_ERROR << 16; /* retry the command */ 2754 dev_warn(&h->pdev->dev, "CDB %16phN : unsolicited abort\n", 2755 cp->Request.CDB); 2756 break; 2757 case CMD_TIMEOUT: 2758 cmd->result = DID_TIME_OUT << 16; 2759 dev_warn(&h->pdev->dev, "CDB %16phN timed out\n", 2760 cp->Request.CDB); 2761 break; 2762 case CMD_UNABORTABLE: 2763 cmd->result = DID_ERROR << 16; 2764 dev_warn(&h->pdev->dev, "Command unabortable\n"); 2765 break; 2766 case CMD_TMF_STATUS: 2767 if (hpsa_evaluate_tmf_status(h, cp)) /* TMF failed? */ 2768 cmd->result = DID_ERROR << 16; 2769 break; 2770 case CMD_IOACCEL_DISABLED: 2771 /* This only handles the direct pass-through case since RAID 2772 * offload is handled above. Just attempt a retry. 2773 */ 2774 cmd->result = DID_SOFT_ERROR << 16; 2775 dev_warn(&h->pdev->dev, 2776 "cp %p had HP SSD Smart Path error\n", cp); 2777 break; 2778 default: 2779 cmd->result = DID_ERROR << 16; 2780 dev_warn(&h->pdev->dev, "cp %p returned unknown status %x\n", 2781 cp, ei->CommandStatus); 2782 } 2783 2784 return hpsa_cmd_free_and_done(h, cp, cmd); 2785 } 2786 2787 static void hpsa_pci_unmap(struct pci_dev *pdev, struct CommandList *c, 2788 int sg_used, enum dma_data_direction data_direction) 2789 { 2790 int i; 2791 2792 for (i = 0; i < sg_used; i++) 2793 dma_unmap_single(&pdev->dev, le64_to_cpu(c->SG[i].Addr), 2794 le32_to_cpu(c->SG[i].Len), 2795 data_direction); 2796 } 2797 2798 static int hpsa_map_one(struct pci_dev *pdev, 2799 struct CommandList *cp, 2800 unsigned char *buf, 2801 size_t buflen, 2802 enum dma_data_direction data_direction) 2803 { 2804 u64 addr64; 2805 2806 if (buflen == 0 || data_direction == DMA_NONE) { 2807 cp->Header.SGList = 0; 2808 cp->Header.SGTotal = cpu_to_le16(0); 2809 return 0; 2810 } 2811 2812 addr64 = dma_map_single(&pdev->dev, buf, buflen, data_direction); 2813 if (dma_mapping_error(&pdev->dev, addr64)) { 2814 /* Prevent subsequent unmap of something never mapped */ 2815 cp->Header.SGList = 0; 2816 cp->Header.SGTotal = cpu_to_le16(0); 2817 return -1; 2818 } 2819 cp->SG[0].Addr = cpu_to_le64(addr64); 2820 cp->SG[0].Len = cpu_to_le32(buflen); 2821 cp->SG[0].Ext = cpu_to_le32(HPSA_SG_LAST); /* we are not chaining */ 2822 cp->Header.SGList = 1; /* no. SGs contig in this cmd */ 2823 cp->Header.SGTotal = cpu_to_le16(1); /* total sgs in cmd list */ 2824 return 0; 2825 } 2826 2827 #define NO_TIMEOUT ((unsigned long) -1) 2828 #define DEFAULT_TIMEOUT 30000 /* milliseconds */ 2829 static int hpsa_scsi_do_simple_cmd_core(struct ctlr_info *h, 2830 struct CommandList *c, int reply_queue, unsigned long timeout_msecs) 2831 { 2832 DECLARE_COMPLETION_ONSTACK(wait); 2833 2834 c->waiting = &wait; 2835 __enqueue_cmd_and_start_io(h, c, reply_queue); 2836 if (timeout_msecs == NO_TIMEOUT) { 2837 /* TODO: get rid of this no-timeout thing */ 2838 wait_for_completion_io(&wait); 2839 return IO_OK; 2840 } 2841 if (!wait_for_completion_io_timeout(&wait, 2842 msecs_to_jiffies(timeout_msecs))) { 2843 dev_warn(&h->pdev->dev, "Command timed out.\n"); 2844 return -ETIMEDOUT; 2845 } 2846 return IO_OK; 2847 } 2848 2849 static int hpsa_scsi_do_simple_cmd(struct ctlr_info *h, struct CommandList *c, 2850 int reply_queue, unsigned long timeout_msecs) 2851 { 2852 if (unlikely(lockup_detected(h))) { 2853 c->err_info->CommandStatus = CMD_CTLR_LOCKUP; 2854 return IO_OK; 2855 } 2856 return hpsa_scsi_do_simple_cmd_core(h, c, reply_queue, timeout_msecs); 2857 } 2858 2859 static u32 lockup_detected(struct ctlr_info *h) 2860 { 2861 int cpu; 2862 u32 rc, *lockup_detected; 2863 2864 cpu = get_cpu(); 2865 lockup_detected = per_cpu_ptr(h->lockup_detected, cpu); 2866 rc = *lockup_detected; 2867 put_cpu(); 2868 return rc; 2869 } 2870 2871 #define MAX_DRIVER_CMD_RETRIES 25 2872 static int hpsa_scsi_do_simple_cmd_with_retry(struct ctlr_info *h, 2873 struct CommandList *c, enum dma_data_direction data_direction, 2874 unsigned long timeout_msecs) 2875 { 2876 int backoff_time = 10, retry_count = 0; 2877 int rc; 2878 2879 do { 2880 memset(c->err_info, 0, sizeof(*c->err_info)); 2881 rc = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE, 2882 timeout_msecs); 2883 if (rc) 2884 break; 2885 retry_count++; 2886 if (retry_count > 3) { 2887 msleep(backoff_time); 2888 if (backoff_time < 1000) 2889 backoff_time *= 2; 2890 } 2891 } while ((check_for_unit_attention(h, c) || 2892 check_for_busy(h, c)) && 2893 retry_count <= MAX_DRIVER_CMD_RETRIES); 2894 hpsa_pci_unmap(h->pdev, c, 1, data_direction); 2895 if (retry_count > MAX_DRIVER_CMD_RETRIES) 2896 rc = -EIO; 2897 return rc; 2898 } 2899 2900 static void hpsa_print_cmd(struct ctlr_info *h, char *txt, 2901 struct CommandList *c) 2902 { 2903 const u8 *cdb = c->Request.CDB; 2904 const u8 *lun = c->Header.LUN.LunAddrBytes; 2905 2906 dev_warn(&h->pdev->dev, "%s: LUN:%8phN CDB:%16phN\n", 2907 txt, lun, cdb); 2908 } 2909 2910 static void hpsa_scsi_interpret_error(struct ctlr_info *h, 2911 struct CommandList *cp) 2912 { 2913 const struct ErrorInfo *ei = cp->err_info; 2914 struct device *d = &cp->h->pdev->dev; 2915 u8 sense_key, asc, ascq; 2916 int sense_len; 2917 2918 switch (ei->CommandStatus) { 2919 case CMD_TARGET_STATUS: 2920 if (ei->SenseLen > sizeof(ei->SenseInfo)) 2921 sense_len = sizeof(ei->SenseInfo); 2922 else 2923 sense_len = ei->SenseLen; 2924 decode_sense_data(ei->SenseInfo, sense_len, 2925 &sense_key, &asc, &ascq); 2926 hpsa_print_cmd(h, "SCSI status", cp); 2927 if (ei->ScsiStatus == SAM_STAT_CHECK_CONDITION) 2928 dev_warn(d, "SCSI Status = 02, Sense key = 0x%02x, ASC = 0x%02x, ASCQ = 0x%02x\n", 2929 sense_key, asc, ascq); 2930 else 2931 dev_warn(d, "SCSI Status = 0x%02x\n", ei->ScsiStatus); 2932 if (ei->ScsiStatus == 0) 2933 dev_warn(d, "SCSI status is abnormally zero. " 2934 "(probably indicates selection timeout " 2935 "reported incorrectly due to a known " 2936 "firmware bug, circa July, 2001.)\n"); 2937 break; 2938 case CMD_DATA_UNDERRUN: /* let mid layer handle it. */ 2939 break; 2940 case CMD_DATA_OVERRUN: 2941 hpsa_print_cmd(h, "overrun condition", cp); 2942 break; 2943 case CMD_INVALID: { 2944 /* controller unfortunately reports SCSI passthru's 2945 * to non-existent targets as invalid commands. 2946 */ 2947 hpsa_print_cmd(h, "invalid command", cp); 2948 dev_warn(d, "probably means device no longer present\n"); 2949 } 2950 break; 2951 case CMD_PROTOCOL_ERR: 2952 hpsa_print_cmd(h, "protocol error", cp); 2953 break; 2954 case CMD_HARDWARE_ERR: 2955 hpsa_print_cmd(h, "hardware error", cp); 2956 break; 2957 case CMD_CONNECTION_LOST: 2958 hpsa_print_cmd(h, "connection lost", cp); 2959 break; 2960 case CMD_ABORTED: 2961 hpsa_print_cmd(h, "aborted", cp); 2962 break; 2963 case CMD_ABORT_FAILED: 2964 hpsa_print_cmd(h, "abort failed", cp); 2965 break; 2966 case CMD_UNSOLICITED_ABORT: 2967 hpsa_print_cmd(h, "unsolicited abort", cp); 2968 break; 2969 case CMD_TIMEOUT: 2970 hpsa_print_cmd(h, "timed out", cp); 2971 break; 2972 case CMD_UNABORTABLE: 2973 hpsa_print_cmd(h, "unabortable", cp); 2974 break; 2975 case CMD_CTLR_LOCKUP: 2976 hpsa_print_cmd(h, "controller lockup detected", cp); 2977 break; 2978 default: 2979 hpsa_print_cmd(h, "unknown status", cp); 2980 dev_warn(d, "Unknown command status %x\n", 2981 ei->CommandStatus); 2982 } 2983 } 2984 2985 static int hpsa_do_receive_diagnostic(struct ctlr_info *h, u8 *scsi3addr, 2986 u8 page, u8 *buf, size_t bufsize) 2987 { 2988 int rc = IO_OK; 2989 struct CommandList *c; 2990 struct ErrorInfo *ei; 2991 2992 c = cmd_alloc(h); 2993 if (fill_cmd(c, RECEIVE_DIAGNOSTIC, h, buf, bufsize, 2994 page, scsi3addr, TYPE_CMD)) { 2995 rc = -1; 2996 goto out; 2997 } 2998 rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE, 2999 NO_TIMEOUT); 3000 if (rc) 3001 goto out; 3002 ei = c->err_info; 3003 if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) { 3004 hpsa_scsi_interpret_error(h, c); 3005 rc = -1; 3006 } 3007 out: 3008 cmd_free(h, c); 3009 return rc; 3010 } 3011 3012 static u64 hpsa_get_enclosure_logical_identifier(struct ctlr_info *h, 3013 u8 *scsi3addr) 3014 { 3015 u8 *buf; 3016 u64 sa = 0; 3017 int rc = 0; 3018 3019 buf = kzalloc(1024, GFP_KERNEL); 3020 if (!buf) 3021 return 0; 3022 3023 rc = hpsa_do_receive_diagnostic(h, scsi3addr, RECEIVE_DIAGNOSTIC, 3024 buf, 1024); 3025 3026 if (rc) 3027 goto out; 3028 3029 sa = get_unaligned_be64(buf+12); 3030 3031 out: 3032 kfree(buf); 3033 return sa; 3034 } 3035 3036 static int hpsa_scsi_do_inquiry(struct ctlr_info *h, unsigned char *scsi3addr, 3037 u16 page, unsigned char *buf, 3038 unsigned char bufsize) 3039 { 3040 int rc = IO_OK; 3041 struct CommandList *c; 3042 struct ErrorInfo *ei; 3043 3044 c = cmd_alloc(h); 3045 3046 if (fill_cmd(c, HPSA_INQUIRY, h, buf, bufsize, 3047 page, scsi3addr, TYPE_CMD)) { 3048 rc = -1; 3049 goto out; 3050 } 3051 rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE, 3052 NO_TIMEOUT); 3053 if (rc) 3054 goto out; 3055 ei = c->err_info; 3056 if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) { 3057 hpsa_scsi_interpret_error(h, c); 3058 rc = -1; 3059 } 3060 out: 3061 cmd_free(h, c); 3062 return rc; 3063 } 3064 3065 static int hpsa_send_reset(struct ctlr_info *h, struct hpsa_scsi_dev_t *dev, 3066 u8 reset_type, int reply_queue) 3067 { 3068 int rc = IO_OK; 3069 struct CommandList *c; 3070 struct ErrorInfo *ei; 3071 3072 c = cmd_alloc(h); 3073 c->device = dev; 3074 3075 /* fill_cmd can't fail here, no data buffer to map. */ 3076 (void) fill_cmd(c, reset_type, h, NULL, 0, 0, dev->scsi3addr, TYPE_MSG); 3077 rc = hpsa_scsi_do_simple_cmd(h, c, reply_queue, NO_TIMEOUT); 3078 if (rc) { 3079 dev_warn(&h->pdev->dev, "Failed to send reset command\n"); 3080 goto out; 3081 } 3082 /* no unmap needed here because no data xfer. */ 3083 3084 ei = c->err_info; 3085 if (ei->CommandStatus != 0) { 3086 hpsa_scsi_interpret_error(h, c); 3087 rc = -1; 3088 } 3089 out: 3090 cmd_free(h, c); 3091 return rc; 3092 } 3093 3094 static bool hpsa_cmd_dev_match(struct ctlr_info *h, struct CommandList *c, 3095 struct hpsa_scsi_dev_t *dev, 3096 unsigned char *scsi3addr) 3097 { 3098 int i; 3099 bool match = false; 3100 struct io_accel2_cmd *c2 = &h->ioaccel2_cmd_pool[c->cmdindex]; 3101 struct hpsa_tmf_struct *ac = (struct hpsa_tmf_struct *) c2; 3102 3103 if (hpsa_is_cmd_idle(c)) 3104 return false; 3105 3106 switch (c->cmd_type) { 3107 case CMD_SCSI: 3108 case CMD_IOCTL_PEND: 3109 match = !memcmp(scsi3addr, &c->Header.LUN.LunAddrBytes, 3110 sizeof(c->Header.LUN.LunAddrBytes)); 3111 break; 3112 3113 case CMD_IOACCEL1: 3114 case CMD_IOACCEL2: 3115 if (c->phys_disk == dev) { 3116 /* HBA mode match */ 3117 match = true; 3118 } else { 3119 /* Possible RAID mode -- check each phys dev. */ 3120 /* FIXME: Do we need to take out a lock here? If 3121 * so, we could just call hpsa_get_pdisk_of_ioaccel2() 3122 * instead. */ 3123 for (i = 0; i < dev->nphysical_disks && !match; i++) { 3124 /* FIXME: an alternate test might be 3125 * 3126 * match = dev->phys_disk[i]->ioaccel_handle 3127 * == c2->scsi_nexus; */ 3128 match = dev->phys_disk[i] == c->phys_disk; 3129 } 3130 } 3131 break; 3132 3133 case IOACCEL2_TMF: 3134 for (i = 0; i < dev->nphysical_disks && !match; i++) { 3135 match = dev->phys_disk[i]->ioaccel_handle == 3136 le32_to_cpu(ac->it_nexus); 3137 } 3138 break; 3139 3140 case 0: /* The command is in the middle of being initialized. */ 3141 match = false; 3142 break; 3143 3144 default: 3145 dev_err(&h->pdev->dev, "unexpected cmd_type: %d\n", 3146 c->cmd_type); 3147 BUG(); 3148 } 3149 3150 return match; 3151 } 3152 3153 static int hpsa_do_reset(struct ctlr_info *h, struct hpsa_scsi_dev_t *dev, 3154 u8 reset_type, int reply_queue) 3155 { 3156 int rc = 0; 3157 3158 /* We can really only handle one reset at a time */ 3159 if (mutex_lock_interruptible(&h->reset_mutex) == -EINTR) { 3160 dev_warn(&h->pdev->dev, "concurrent reset wait interrupted.\n"); 3161 return -EINTR; 3162 } 3163 3164 rc = hpsa_send_reset(h, dev, reset_type, reply_queue); 3165 if (!rc) { 3166 /* incremented by sending the reset request */ 3167 atomic_dec(&dev->commands_outstanding); 3168 wait_event(h->event_sync_wait_queue, 3169 atomic_read(&dev->commands_outstanding) <= 0 || 3170 lockup_detected(h)); 3171 } 3172 3173 if (unlikely(lockup_detected(h))) { 3174 dev_warn(&h->pdev->dev, 3175 "Controller lockup detected during reset wait\n"); 3176 rc = -ENODEV; 3177 } 3178 3179 if (!rc) 3180 rc = wait_for_device_to_become_ready(h, dev->scsi3addr, 0); 3181 3182 mutex_unlock(&h->reset_mutex); 3183 return rc; 3184 } 3185 3186 static void hpsa_get_raid_level(struct ctlr_info *h, 3187 unsigned char *scsi3addr, unsigned char *raid_level) 3188 { 3189 int rc; 3190 unsigned char *buf; 3191 3192 *raid_level = RAID_UNKNOWN; 3193 buf = kzalloc(64, GFP_KERNEL); 3194 if (!buf) 3195 return; 3196 3197 if (!hpsa_vpd_page_supported(h, scsi3addr, 3198 HPSA_VPD_LV_DEVICE_GEOMETRY)) 3199 goto exit; 3200 3201 rc = hpsa_scsi_do_inquiry(h, scsi3addr, VPD_PAGE | 3202 HPSA_VPD_LV_DEVICE_GEOMETRY, buf, 64); 3203 3204 if (rc == 0) 3205 *raid_level = buf[8]; 3206 if (*raid_level > RAID_UNKNOWN) 3207 *raid_level = RAID_UNKNOWN; 3208 exit: 3209 kfree(buf); 3210 return; 3211 } 3212 3213 #define HPSA_MAP_DEBUG 3214 #ifdef HPSA_MAP_DEBUG 3215 static void hpsa_debug_map_buff(struct ctlr_info *h, int rc, 3216 struct raid_map_data *map_buff) 3217 { 3218 struct raid_map_disk_data *dd = &map_buff->data[0]; 3219 int map, row, col; 3220 u16 map_cnt, row_cnt, disks_per_row; 3221 3222 if (rc != 0) 3223 return; 3224 3225 /* Show details only if debugging has been activated. */ 3226 if (h->raid_offload_debug < 2) 3227 return; 3228 3229 dev_info(&h->pdev->dev, "structure_size = %u\n", 3230 le32_to_cpu(map_buff->structure_size)); 3231 dev_info(&h->pdev->dev, "volume_blk_size = %u\n", 3232 le32_to_cpu(map_buff->volume_blk_size)); 3233 dev_info(&h->pdev->dev, "volume_blk_cnt = 0x%llx\n", 3234 le64_to_cpu(map_buff->volume_blk_cnt)); 3235 dev_info(&h->pdev->dev, "physicalBlockShift = %u\n", 3236 map_buff->phys_blk_shift); 3237 dev_info(&h->pdev->dev, "parity_rotation_shift = %u\n", 3238 map_buff->parity_rotation_shift); 3239 dev_info(&h->pdev->dev, "strip_size = %u\n", 3240 le16_to_cpu(map_buff->strip_size)); 3241 dev_info(&h->pdev->dev, "disk_starting_blk = 0x%llx\n", 3242 le64_to_cpu(map_buff->disk_starting_blk)); 3243 dev_info(&h->pdev->dev, "disk_blk_cnt = 0x%llx\n", 3244 le64_to_cpu(map_buff->disk_blk_cnt)); 3245 dev_info(&h->pdev->dev, "data_disks_per_row = %u\n", 3246 le16_to_cpu(map_buff->data_disks_per_row)); 3247 dev_info(&h->pdev->dev, "metadata_disks_per_row = %u\n", 3248 le16_to_cpu(map_buff->metadata_disks_per_row)); 3249 dev_info(&h->pdev->dev, "row_cnt = %u\n", 3250 le16_to_cpu(map_buff->row_cnt)); 3251 dev_info(&h->pdev->dev, "layout_map_count = %u\n", 3252 le16_to_cpu(map_buff->layout_map_count)); 3253 dev_info(&h->pdev->dev, "flags = 0x%x\n", 3254 le16_to_cpu(map_buff->flags)); 3255 dev_info(&h->pdev->dev, "encryption = %s\n", 3256 le16_to_cpu(map_buff->flags) & 3257 RAID_MAP_FLAG_ENCRYPT_ON ? "ON" : "OFF"); 3258 dev_info(&h->pdev->dev, "dekindex = %u\n", 3259 le16_to_cpu(map_buff->dekindex)); 3260 map_cnt = le16_to_cpu(map_buff->layout_map_count); 3261 for (map = 0; map < map_cnt; map++) { 3262 dev_info(&h->pdev->dev, "Map%u:\n", map); 3263 row_cnt = le16_to_cpu(map_buff->row_cnt); 3264 for (row = 0; row < row_cnt; row++) { 3265 dev_info(&h->pdev->dev, " Row%u:\n", row); 3266 disks_per_row = 3267 le16_to_cpu(map_buff->data_disks_per_row); 3268 for (col = 0; col < disks_per_row; col++, dd++) 3269 dev_info(&h->pdev->dev, 3270 " D%02u: h=0x%04x xor=%u,%u\n", 3271 col, dd->ioaccel_handle, 3272 dd->xor_mult[0], dd->xor_mult[1]); 3273 disks_per_row = 3274 le16_to_cpu(map_buff->metadata_disks_per_row); 3275 for (col = 0; col < disks_per_row; col++, dd++) 3276 dev_info(&h->pdev->dev, 3277 " M%02u: h=0x%04x xor=%u,%u\n", 3278 col, dd->ioaccel_handle, 3279 dd->xor_mult[0], dd->xor_mult[1]); 3280 } 3281 } 3282 } 3283 #else 3284 static void hpsa_debug_map_buff(__attribute__((unused)) struct ctlr_info *h, 3285 __attribute__((unused)) int rc, 3286 __attribute__((unused)) struct raid_map_data *map_buff) 3287 { 3288 } 3289 #endif 3290 3291 static int hpsa_get_raid_map(struct ctlr_info *h, 3292 unsigned char *scsi3addr, struct hpsa_scsi_dev_t *this_device) 3293 { 3294 int rc = 0; 3295 struct CommandList *c; 3296 struct ErrorInfo *ei; 3297 3298 c = cmd_alloc(h); 3299 3300 if (fill_cmd(c, HPSA_GET_RAID_MAP, h, &this_device->raid_map, 3301 sizeof(this_device->raid_map), 0, 3302 scsi3addr, TYPE_CMD)) { 3303 dev_warn(&h->pdev->dev, "hpsa_get_raid_map fill_cmd failed\n"); 3304 cmd_free(h, c); 3305 return -1; 3306 } 3307 rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE, 3308 NO_TIMEOUT); 3309 if (rc) 3310 goto out; 3311 ei = c->err_info; 3312 if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) { 3313 hpsa_scsi_interpret_error(h, c); 3314 rc = -1; 3315 goto out; 3316 } 3317 cmd_free(h, c); 3318 3319 /* @todo in the future, dynamically allocate RAID map memory */ 3320 if (le32_to_cpu(this_device->raid_map.structure_size) > 3321 sizeof(this_device->raid_map)) { 3322 dev_warn(&h->pdev->dev, "RAID map size is too large!\n"); 3323 rc = -1; 3324 } 3325 hpsa_debug_map_buff(h, rc, &this_device->raid_map); 3326 return rc; 3327 out: 3328 cmd_free(h, c); 3329 return rc; 3330 } 3331 3332 static int hpsa_bmic_sense_subsystem_information(struct ctlr_info *h, 3333 unsigned char scsi3addr[], u16 bmic_device_index, 3334 struct bmic_sense_subsystem_info *buf, size_t bufsize) 3335 { 3336 int rc = IO_OK; 3337 struct CommandList *c; 3338 struct ErrorInfo *ei; 3339 3340 c = cmd_alloc(h); 3341 3342 rc = fill_cmd(c, BMIC_SENSE_SUBSYSTEM_INFORMATION, h, buf, bufsize, 3343 0, RAID_CTLR_LUNID, TYPE_CMD); 3344 if (rc) 3345 goto out; 3346 3347 c->Request.CDB[2] = bmic_device_index & 0xff; 3348 c->Request.CDB[9] = (bmic_device_index >> 8) & 0xff; 3349 3350 rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE, 3351 NO_TIMEOUT); 3352 if (rc) 3353 goto out; 3354 ei = c->err_info; 3355 if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) { 3356 hpsa_scsi_interpret_error(h, c); 3357 rc = -1; 3358 } 3359 out: 3360 cmd_free(h, c); 3361 return rc; 3362 } 3363 3364 static int hpsa_bmic_id_controller(struct ctlr_info *h, 3365 struct bmic_identify_controller *buf, size_t bufsize) 3366 { 3367 int rc = IO_OK; 3368 struct CommandList *c; 3369 struct ErrorInfo *ei; 3370 3371 c = cmd_alloc(h); 3372 3373 rc = fill_cmd(c, BMIC_IDENTIFY_CONTROLLER, h, buf, bufsize, 3374 0, RAID_CTLR_LUNID, TYPE_CMD); 3375 if (rc) 3376 goto out; 3377 3378 rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE, 3379 NO_TIMEOUT); 3380 if (rc) 3381 goto out; 3382 ei = c->err_info; 3383 if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) { 3384 hpsa_scsi_interpret_error(h, c); 3385 rc = -1; 3386 } 3387 out: 3388 cmd_free(h, c); 3389 return rc; 3390 } 3391 3392 static int hpsa_bmic_id_physical_device(struct ctlr_info *h, 3393 unsigned char scsi3addr[], u16 bmic_device_index, 3394 struct bmic_identify_physical_device *buf, size_t bufsize) 3395 { 3396 int rc = IO_OK; 3397 struct CommandList *c; 3398 struct ErrorInfo *ei; 3399 3400 c = cmd_alloc(h); 3401 rc = fill_cmd(c, BMIC_IDENTIFY_PHYSICAL_DEVICE, h, buf, bufsize, 3402 0, RAID_CTLR_LUNID, TYPE_CMD); 3403 if (rc) 3404 goto out; 3405 3406 c->Request.CDB[2] = bmic_device_index & 0xff; 3407 c->Request.CDB[9] = (bmic_device_index >> 8) & 0xff; 3408 3409 hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE, 3410 NO_TIMEOUT); 3411 ei = c->err_info; 3412 if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) { 3413 hpsa_scsi_interpret_error(h, c); 3414 rc = -1; 3415 } 3416 out: 3417 cmd_free(h, c); 3418 3419 return rc; 3420 } 3421 3422 /* 3423 * get enclosure information 3424 * struct ReportExtendedLUNdata *rlep - Used for BMIC drive number 3425 * struct hpsa_scsi_dev_t *encl_dev - device entry for enclosure 3426 * Uses id_physical_device to determine the box_index. 3427 */ 3428 static void hpsa_get_enclosure_info(struct ctlr_info *h, 3429 unsigned char *scsi3addr, 3430 struct ReportExtendedLUNdata *rlep, int rle_index, 3431 struct hpsa_scsi_dev_t *encl_dev) 3432 { 3433 int rc = -1; 3434 struct CommandList *c = NULL; 3435 struct ErrorInfo *ei = NULL; 3436 struct bmic_sense_storage_box_params *bssbp = NULL; 3437 struct bmic_identify_physical_device *id_phys = NULL; 3438 struct ext_report_lun_entry *rle = &rlep->LUN[rle_index]; 3439 u16 bmic_device_index = 0; 3440 3441 encl_dev->eli = 3442 hpsa_get_enclosure_logical_identifier(h, scsi3addr); 3443 3444 bmic_device_index = GET_BMIC_DRIVE_NUMBER(&rle->lunid[0]); 3445 3446 if (encl_dev->target == -1 || encl_dev->lun == -1) { 3447 rc = IO_OK; 3448 goto out; 3449 } 3450 3451 if (bmic_device_index == 0xFF00 || MASKED_DEVICE(&rle->lunid[0])) { 3452 rc = IO_OK; 3453 goto out; 3454 } 3455 3456 bssbp = kzalloc(sizeof(*bssbp), GFP_KERNEL); 3457 if (!bssbp) 3458 goto out; 3459 3460 id_phys = kzalloc(sizeof(*id_phys), GFP_KERNEL); 3461 if (!id_phys) 3462 goto out; 3463 3464 rc = hpsa_bmic_id_physical_device(h, scsi3addr, bmic_device_index, 3465 id_phys, sizeof(*id_phys)); 3466 if (rc) { 3467 dev_warn(&h->pdev->dev, "%s: id_phys failed %d bdi[0x%x]\n", 3468 __func__, encl_dev->external, bmic_device_index); 3469 goto out; 3470 } 3471 3472 c = cmd_alloc(h); 3473 3474 rc = fill_cmd(c, BMIC_SENSE_STORAGE_BOX_PARAMS, h, bssbp, 3475 sizeof(*bssbp), 0, RAID_CTLR_LUNID, TYPE_CMD); 3476 3477 if (rc) 3478 goto out; 3479 3480 if (id_phys->phys_connector[1] == 'E') 3481 c->Request.CDB[5] = id_phys->box_index; 3482 else 3483 c->Request.CDB[5] = 0; 3484 3485 rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE, 3486 NO_TIMEOUT); 3487 if (rc) 3488 goto out; 3489 3490 ei = c->err_info; 3491 if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) { 3492 rc = -1; 3493 goto out; 3494 } 3495 3496 encl_dev->box[id_phys->active_path_number] = bssbp->phys_box_on_port; 3497 memcpy(&encl_dev->phys_connector[id_phys->active_path_number], 3498 bssbp->phys_connector, sizeof(bssbp->phys_connector)); 3499 3500 rc = IO_OK; 3501 out: 3502 kfree(bssbp); 3503 kfree(id_phys); 3504 3505 if (c) 3506 cmd_free(h, c); 3507 3508 if (rc != IO_OK) 3509 hpsa_show_dev_msg(KERN_INFO, h, encl_dev, 3510 "Error, could not get enclosure information"); 3511 } 3512 3513 static u64 hpsa_get_sas_address_from_report_physical(struct ctlr_info *h, 3514 unsigned char *scsi3addr) 3515 { 3516 struct ReportExtendedLUNdata *physdev; 3517 u32 nphysicals; 3518 u64 sa = 0; 3519 int i; 3520 3521 physdev = kzalloc(sizeof(*physdev), GFP_KERNEL); 3522 if (!physdev) 3523 return 0; 3524 3525 if (hpsa_scsi_do_report_phys_luns(h, physdev, sizeof(*physdev))) { 3526 dev_err(&h->pdev->dev, "report physical LUNs failed.\n"); 3527 kfree(physdev); 3528 return 0; 3529 } 3530 nphysicals = get_unaligned_be32(physdev->LUNListLength) / 24; 3531 3532 for (i = 0; i < nphysicals; i++) 3533 if (!memcmp(&physdev->LUN[i].lunid[0], scsi3addr, 8)) { 3534 sa = get_unaligned_be64(&physdev->LUN[i].wwid[0]); 3535 break; 3536 } 3537 3538 kfree(physdev); 3539 3540 return sa; 3541 } 3542 3543 static void hpsa_get_sas_address(struct ctlr_info *h, unsigned char *scsi3addr, 3544 struct hpsa_scsi_dev_t *dev) 3545 { 3546 int rc; 3547 u64 sa = 0; 3548 3549 if (is_hba_lunid(scsi3addr)) { 3550 struct bmic_sense_subsystem_info *ssi; 3551 3552 ssi = kzalloc(sizeof(*ssi), GFP_KERNEL); 3553 if (!ssi) 3554 return; 3555 3556 rc = hpsa_bmic_sense_subsystem_information(h, 3557 scsi3addr, 0, ssi, sizeof(*ssi)); 3558 if (rc == 0) { 3559 sa = get_unaligned_be64(ssi->primary_world_wide_id); 3560 h->sas_address = sa; 3561 } 3562 3563 kfree(ssi); 3564 } else 3565 sa = hpsa_get_sas_address_from_report_physical(h, scsi3addr); 3566 3567 dev->sas_address = sa; 3568 } 3569 3570 static void hpsa_ext_ctrl_present(struct ctlr_info *h, 3571 struct ReportExtendedLUNdata *physdev) 3572 { 3573 u32 nphysicals; 3574 int i; 3575 3576 if (h->discovery_polling) 3577 return; 3578 3579 nphysicals = (get_unaligned_be32(physdev->LUNListLength) / 24) + 1; 3580 3581 for (i = 0; i < nphysicals; i++) { 3582 if (physdev->LUN[i].device_type == 3583 BMIC_DEVICE_TYPE_CONTROLLER 3584 && !is_hba_lunid(physdev->LUN[i].lunid)) { 3585 dev_info(&h->pdev->dev, 3586 "External controller present, activate discovery polling and disable rld caching\n"); 3587 hpsa_disable_rld_caching(h); 3588 h->discovery_polling = 1; 3589 break; 3590 } 3591 } 3592 } 3593 3594 /* Get a device id from inquiry page 0x83 */ 3595 static bool hpsa_vpd_page_supported(struct ctlr_info *h, 3596 unsigned char scsi3addr[], u8 page) 3597 { 3598 int rc; 3599 int i; 3600 int pages; 3601 unsigned char *buf, bufsize; 3602 3603 buf = kzalloc(256, GFP_KERNEL); 3604 if (!buf) 3605 return false; 3606 3607 /* Get the size of the page list first */ 3608 rc = hpsa_scsi_do_inquiry(h, scsi3addr, 3609 VPD_PAGE | HPSA_VPD_SUPPORTED_PAGES, 3610 buf, HPSA_VPD_HEADER_SZ); 3611 if (rc != 0) 3612 goto exit_unsupported; 3613 pages = buf[3]; 3614 if ((pages + HPSA_VPD_HEADER_SZ) <= 255) 3615 bufsize = pages + HPSA_VPD_HEADER_SZ; 3616 else 3617 bufsize = 255; 3618 3619 /* Get the whole VPD page list */ 3620 rc = hpsa_scsi_do_inquiry(h, scsi3addr, 3621 VPD_PAGE | HPSA_VPD_SUPPORTED_PAGES, 3622 buf, bufsize); 3623 if (rc != 0) 3624 goto exit_unsupported; 3625 3626 pages = buf[3]; 3627 for (i = 1; i <= pages; i++) 3628 if (buf[3 + i] == page) 3629 goto exit_supported; 3630 exit_unsupported: 3631 kfree(buf); 3632 return false; 3633 exit_supported: 3634 kfree(buf); 3635 return true; 3636 } 3637 3638 /* 3639 * Called during a scan operation. 3640 * Sets ioaccel status on the new device list, not the existing device list 3641 * 3642 * The device list used during I/O will be updated later in 3643 * adjust_hpsa_scsi_table. 3644 */ 3645 static void hpsa_get_ioaccel_status(struct ctlr_info *h, 3646 unsigned char *scsi3addr, struct hpsa_scsi_dev_t *this_device) 3647 { 3648 int rc; 3649 unsigned char *buf; 3650 u8 ioaccel_status; 3651 3652 this_device->offload_config = 0; 3653 this_device->offload_enabled = 0; 3654 this_device->offload_to_be_enabled = 0; 3655 3656 buf = kzalloc(64, GFP_KERNEL); 3657 if (!buf) 3658 return; 3659 if (!hpsa_vpd_page_supported(h, scsi3addr, HPSA_VPD_LV_IOACCEL_STATUS)) 3660 goto out; 3661 rc = hpsa_scsi_do_inquiry(h, scsi3addr, 3662 VPD_PAGE | HPSA_VPD_LV_IOACCEL_STATUS, buf, 64); 3663 if (rc != 0) 3664 goto out; 3665 3666 #define IOACCEL_STATUS_BYTE 4 3667 #define OFFLOAD_CONFIGURED_BIT 0x01 3668 #define OFFLOAD_ENABLED_BIT 0x02 3669 ioaccel_status = buf[IOACCEL_STATUS_BYTE]; 3670 this_device->offload_config = 3671 !!(ioaccel_status & OFFLOAD_CONFIGURED_BIT); 3672 if (this_device->offload_config) { 3673 this_device->offload_to_be_enabled = 3674 !!(ioaccel_status & OFFLOAD_ENABLED_BIT); 3675 if (hpsa_get_raid_map(h, scsi3addr, this_device)) 3676 this_device->offload_to_be_enabled = 0; 3677 } 3678 3679 out: 3680 kfree(buf); 3681 return; 3682 } 3683 3684 /* Get the device id from inquiry page 0x83 */ 3685 static int hpsa_get_device_id(struct ctlr_info *h, unsigned char *scsi3addr, 3686 unsigned char *device_id, int index, int buflen) 3687 { 3688 int rc; 3689 unsigned char *buf; 3690 3691 /* Does controller have VPD for device id? */ 3692 if (!hpsa_vpd_page_supported(h, scsi3addr, HPSA_VPD_LV_DEVICE_ID)) 3693 return 1; /* not supported */ 3694 3695 buf = kzalloc(64, GFP_KERNEL); 3696 if (!buf) 3697 return -ENOMEM; 3698 3699 rc = hpsa_scsi_do_inquiry(h, scsi3addr, VPD_PAGE | 3700 HPSA_VPD_LV_DEVICE_ID, buf, 64); 3701 if (rc == 0) { 3702 if (buflen > 16) 3703 buflen = 16; 3704 memcpy(device_id, &buf[8], buflen); 3705 } 3706 3707 kfree(buf); 3708 3709 return rc; /*0 - got id, otherwise, didn't */ 3710 } 3711 3712 static int hpsa_scsi_do_report_luns(struct ctlr_info *h, int logical, 3713 void *buf, int bufsize, 3714 int extended_response) 3715 { 3716 int rc = IO_OK; 3717 struct CommandList *c; 3718 unsigned char scsi3addr[8]; 3719 struct ErrorInfo *ei; 3720 3721 c = cmd_alloc(h); 3722 3723 /* address the controller */ 3724 memset(scsi3addr, 0, sizeof(scsi3addr)); 3725 if (fill_cmd(c, logical ? HPSA_REPORT_LOG : HPSA_REPORT_PHYS, h, 3726 buf, bufsize, 0, scsi3addr, TYPE_CMD)) { 3727 rc = -EAGAIN; 3728 goto out; 3729 } 3730 if (extended_response) 3731 c->Request.CDB[1] = extended_response; 3732 rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE, 3733 NO_TIMEOUT); 3734 if (rc) 3735 goto out; 3736 ei = c->err_info; 3737 if (ei->CommandStatus != 0 && 3738 ei->CommandStatus != CMD_DATA_UNDERRUN) { 3739 hpsa_scsi_interpret_error(h, c); 3740 rc = -EIO; 3741 } else { 3742 struct ReportLUNdata *rld = buf; 3743 3744 if (rld->extended_response_flag != extended_response) { 3745 if (!h->legacy_board) { 3746 dev_err(&h->pdev->dev, 3747 "report luns requested format %u, got %u\n", 3748 extended_response, 3749 rld->extended_response_flag); 3750 rc = -EINVAL; 3751 } else 3752 rc = -EOPNOTSUPP; 3753 } 3754 } 3755 out: 3756 cmd_free(h, c); 3757 return rc; 3758 } 3759 3760 static inline int hpsa_scsi_do_report_phys_luns(struct ctlr_info *h, 3761 struct ReportExtendedLUNdata *buf, int bufsize) 3762 { 3763 int rc; 3764 struct ReportLUNdata *lbuf; 3765 3766 rc = hpsa_scsi_do_report_luns(h, 0, buf, bufsize, 3767 HPSA_REPORT_PHYS_EXTENDED); 3768 if (!rc || rc != -EOPNOTSUPP) 3769 return rc; 3770 3771 /* REPORT PHYS EXTENDED is not supported */ 3772 lbuf = kzalloc(sizeof(*lbuf), GFP_KERNEL); 3773 if (!lbuf) 3774 return -ENOMEM; 3775 3776 rc = hpsa_scsi_do_report_luns(h, 0, lbuf, sizeof(*lbuf), 0); 3777 if (!rc) { 3778 int i; 3779 u32 nphys; 3780 3781 /* Copy ReportLUNdata header */ 3782 memcpy(buf, lbuf, 8); 3783 nphys = be32_to_cpu(*((__be32 *)lbuf->LUNListLength)) / 8; 3784 for (i = 0; i < nphys; i++) 3785 memcpy(buf->LUN[i].lunid, lbuf->LUN[i], 8); 3786 } 3787 kfree(lbuf); 3788 return rc; 3789 } 3790 3791 static inline int hpsa_scsi_do_report_log_luns(struct ctlr_info *h, 3792 struct ReportLUNdata *buf, int bufsize) 3793 { 3794 return hpsa_scsi_do_report_luns(h, 1, buf, bufsize, 0); 3795 } 3796 3797 static inline void hpsa_set_bus_target_lun(struct hpsa_scsi_dev_t *device, 3798 int bus, int target, int lun) 3799 { 3800 device->bus = bus; 3801 device->target = target; 3802 device->lun = lun; 3803 } 3804 3805 /* Use VPD inquiry to get details of volume status */ 3806 static int hpsa_get_volume_status(struct ctlr_info *h, 3807 unsigned char scsi3addr[]) 3808 { 3809 int rc; 3810 int status; 3811 int size; 3812 unsigned char *buf; 3813 3814 buf = kzalloc(64, GFP_KERNEL); 3815 if (!buf) 3816 return HPSA_VPD_LV_STATUS_UNSUPPORTED; 3817 3818 /* Does controller have VPD for logical volume status? */ 3819 if (!hpsa_vpd_page_supported(h, scsi3addr, HPSA_VPD_LV_STATUS)) 3820 goto exit_failed; 3821 3822 /* Get the size of the VPD return buffer */ 3823 rc = hpsa_scsi_do_inquiry(h, scsi3addr, VPD_PAGE | HPSA_VPD_LV_STATUS, 3824 buf, HPSA_VPD_HEADER_SZ); 3825 if (rc != 0) 3826 goto exit_failed; 3827 size = buf[3]; 3828 3829 /* Now get the whole VPD buffer */ 3830 rc = hpsa_scsi_do_inquiry(h, scsi3addr, VPD_PAGE | HPSA_VPD_LV_STATUS, 3831 buf, size + HPSA_VPD_HEADER_SZ); 3832 if (rc != 0) 3833 goto exit_failed; 3834 status = buf[4]; /* status byte */ 3835 3836 kfree(buf); 3837 return status; 3838 exit_failed: 3839 kfree(buf); 3840 return HPSA_VPD_LV_STATUS_UNSUPPORTED; 3841 } 3842 3843 /* Determine offline status of a volume. 3844 * Return either: 3845 * 0 (not offline) 3846 * 0xff (offline for unknown reasons) 3847 * # (integer code indicating one of several NOT READY states 3848 * describing why a volume is to be kept offline) 3849 */ 3850 static unsigned char hpsa_volume_offline(struct ctlr_info *h, 3851 unsigned char scsi3addr[]) 3852 { 3853 struct CommandList *c; 3854 unsigned char *sense; 3855 u8 sense_key, asc, ascq; 3856 int sense_len; 3857 int rc, ldstat = 0; 3858 u16 cmd_status; 3859 u8 scsi_status; 3860 #define ASC_LUN_NOT_READY 0x04 3861 #define ASCQ_LUN_NOT_READY_FORMAT_IN_PROGRESS 0x04 3862 #define ASCQ_LUN_NOT_READY_INITIALIZING_CMD_REQ 0x02 3863 3864 c = cmd_alloc(h); 3865 3866 (void) fill_cmd(c, TEST_UNIT_READY, h, NULL, 0, 0, scsi3addr, TYPE_CMD); 3867 rc = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE, 3868 NO_TIMEOUT); 3869 if (rc) { 3870 cmd_free(h, c); 3871 return HPSA_VPD_LV_STATUS_UNSUPPORTED; 3872 } 3873 sense = c->err_info->SenseInfo; 3874 if (c->err_info->SenseLen > sizeof(c->err_info->SenseInfo)) 3875 sense_len = sizeof(c->err_info->SenseInfo); 3876 else 3877 sense_len = c->err_info->SenseLen; 3878 decode_sense_data(sense, sense_len, &sense_key, &asc, &ascq); 3879 cmd_status = c->err_info->CommandStatus; 3880 scsi_status = c->err_info->ScsiStatus; 3881 cmd_free(h, c); 3882 3883 /* Determine the reason for not ready state */ 3884 ldstat = hpsa_get_volume_status(h, scsi3addr); 3885 3886 /* Keep volume offline in certain cases: */ 3887 switch (ldstat) { 3888 case HPSA_LV_FAILED: 3889 case HPSA_LV_UNDERGOING_ERASE: 3890 case HPSA_LV_NOT_AVAILABLE: 3891 case HPSA_LV_UNDERGOING_RPI: 3892 case HPSA_LV_PENDING_RPI: 3893 case HPSA_LV_ENCRYPTED_NO_KEY: 3894 case HPSA_LV_PLAINTEXT_IN_ENCRYPT_ONLY_CONTROLLER: 3895 case HPSA_LV_UNDERGOING_ENCRYPTION: 3896 case HPSA_LV_UNDERGOING_ENCRYPTION_REKEYING: 3897 case HPSA_LV_ENCRYPTED_IN_NON_ENCRYPTED_CONTROLLER: 3898 return ldstat; 3899 case HPSA_VPD_LV_STATUS_UNSUPPORTED: 3900 /* If VPD status page isn't available, 3901 * use ASC/ASCQ to determine state 3902 */ 3903 if ((ascq == ASCQ_LUN_NOT_READY_FORMAT_IN_PROGRESS) || 3904 (ascq == ASCQ_LUN_NOT_READY_INITIALIZING_CMD_REQ)) 3905 return ldstat; 3906 break; 3907 default: 3908 break; 3909 } 3910 return HPSA_LV_OK; 3911 } 3912 3913 static int hpsa_update_device_info(struct ctlr_info *h, 3914 unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device, 3915 unsigned char *is_OBDR_device) 3916 { 3917 3918 #define OBDR_SIG_OFFSET 43 3919 #define OBDR_TAPE_SIG "$DR-10" 3920 #define OBDR_SIG_LEN (sizeof(OBDR_TAPE_SIG) - 1) 3921 #define OBDR_TAPE_INQ_SIZE (OBDR_SIG_OFFSET + OBDR_SIG_LEN) 3922 3923 unsigned char *inq_buff; 3924 unsigned char *obdr_sig; 3925 int rc = 0; 3926 3927 inq_buff = kzalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL); 3928 if (!inq_buff) { 3929 rc = -ENOMEM; 3930 goto bail_out; 3931 } 3932 3933 /* Do an inquiry to the device to see what it is. */ 3934 if (hpsa_scsi_do_inquiry(h, scsi3addr, 0, inq_buff, 3935 (unsigned char) OBDR_TAPE_INQ_SIZE) != 0) { 3936 dev_err(&h->pdev->dev, 3937 "%s: inquiry failed, device will be skipped.\n", 3938 __func__); 3939 rc = HPSA_INQUIRY_FAILED; 3940 goto bail_out; 3941 } 3942 3943 scsi_sanitize_inquiry_string(&inq_buff[8], 8); 3944 scsi_sanitize_inquiry_string(&inq_buff[16], 16); 3945 3946 this_device->devtype = (inq_buff[0] & 0x1f); 3947 memcpy(this_device->scsi3addr, scsi3addr, 8); 3948 memcpy(this_device->vendor, &inq_buff[8], 3949 sizeof(this_device->vendor)); 3950 memcpy(this_device->model, &inq_buff[16], 3951 sizeof(this_device->model)); 3952 this_device->rev = inq_buff[2]; 3953 memset(this_device->device_id, 0, 3954 sizeof(this_device->device_id)); 3955 if (hpsa_get_device_id(h, scsi3addr, this_device->device_id, 8, 3956 sizeof(this_device->device_id)) < 0) { 3957 dev_err(&h->pdev->dev, 3958 "hpsa%d: %s: can't get device id for [%d:%d:%d:%d]\t%s\t%.16s\n", 3959 h->ctlr, __func__, 3960 h->scsi_host->host_no, 3961 this_device->bus, this_device->target, 3962 this_device->lun, 3963 scsi_device_type(this_device->devtype), 3964 this_device->model); 3965 rc = HPSA_LV_FAILED; 3966 goto bail_out; 3967 } 3968 3969 if ((this_device->devtype == TYPE_DISK || 3970 this_device->devtype == TYPE_ZBC) && 3971 is_logical_dev_addr_mode(scsi3addr)) { 3972 unsigned char volume_offline; 3973 3974 hpsa_get_raid_level(h, scsi3addr, &this_device->raid_level); 3975 if (h->fw_support & MISC_FW_RAID_OFFLOAD_BASIC) 3976 hpsa_get_ioaccel_status(h, scsi3addr, this_device); 3977 volume_offline = hpsa_volume_offline(h, scsi3addr); 3978 if (volume_offline == HPSA_VPD_LV_STATUS_UNSUPPORTED && 3979 h->legacy_board) { 3980 /* 3981 * Legacy boards might not support volume status 3982 */ 3983 dev_info(&h->pdev->dev, 3984 "C0:T%d:L%d Volume status not available, assuming online.\n", 3985 this_device->target, this_device->lun); 3986 volume_offline = 0; 3987 } 3988 this_device->volume_offline = volume_offline; 3989 if (volume_offline == HPSA_LV_FAILED) { 3990 rc = HPSA_LV_FAILED; 3991 dev_err(&h->pdev->dev, 3992 "%s: LV failed, device will be skipped.\n", 3993 __func__); 3994 goto bail_out; 3995 } 3996 } else { 3997 this_device->raid_level = RAID_UNKNOWN; 3998 this_device->offload_config = 0; 3999 this_device->offload_enabled = 0; 4000 this_device->offload_to_be_enabled = 0; 4001 this_device->hba_ioaccel_enabled = 0; 4002 this_device->volume_offline = 0; 4003 this_device->queue_depth = h->nr_cmds; 4004 } 4005 4006 if (this_device->external) 4007 this_device->queue_depth = EXTERNAL_QD; 4008 4009 if (is_OBDR_device) { 4010 /* See if this is a One-Button-Disaster-Recovery device 4011 * by looking for "$DR-10" at offset 43 in inquiry data. 4012 */ 4013 obdr_sig = &inq_buff[OBDR_SIG_OFFSET]; 4014 *is_OBDR_device = (this_device->devtype == TYPE_ROM && 4015 strncmp(obdr_sig, OBDR_TAPE_SIG, 4016 OBDR_SIG_LEN) == 0); 4017 } 4018 kfree(inq_buff); 4019 return 0; 4020 4021 bail_out: 4022 kfree(inq_buff); 4023 return rc; 4024 } 4025 4026 /* 4027 * Helper function to assign bus, target, lun mapping of devices. 4028 * Logical drive target and lun are assigned at this time, but 4029 * physical device lun and target assignment are deferred (assigned 4030 * in hpsa_find_target_lun, called by hpsa_scsi_add_entry.) 4031 */ 4032 static void figure_bus_target_lun(struct ctlr_info *h, 4033 u8 *lunaddrbytes, struct hpsa_scsi_dev_t *device) 4034 { 4035 u32 lunid = get_unaligned_le32(lunaddrbytes); 4036 4037 if (!is_logical_dev_addr_mode(lunaddrbytes)) { 4038 /* physical device, target and lun filled in later */ 4039 if (is_hba_lunid(lunaddrbytes)) { 4040 int bus = HPSA_HBA_BUS; 4041 4042 if (!device->rev) 4043 bus = HPSA_LEGACY_HBA_BUS; 4044 hpsa_set_bus_target_lun(device, 4045 bus, 0, lunid & 0x3fff); 4046 } else 4047 /* defer target, lun assignment for physical devices */ 4048 hpsa_set_bus_target_lun(device, 4049 HPSA_PHYSICAL_DEVICE_BUS, -1, -1); 4050 return; 4051 } 4052 /* It's a logical device */ 4053 if (device->external) { 4054 hpsa_set_bus_target_lun(device, 4055 HPSA_EXTERNAL_RAID_VOLUME_BUS, (lunid >> 16) & 0x3fff, 4056 lunid & 0x00ff); 4057 return; 4058 } 4059 hpsa_set_bus_target_lun(device, HPSA_RAID_VOLUME_BUS, 4060 0, lunid & 0x3fff); 4061 } 4062 4063 static int figure_external_status(struct ctlr_info *h, int raid_ctlr_position, 4064 int i, int nphysicals, int nlocal_logicals) 4065 { 4066 /* In report logicals, local logicals are listed first, 4067 * then any externals. 4068 */ 4069 int logicals_start = nphysicals + (raid_ctlr_position == 0); 4070 4071 if (i == raid_ctlr_position) 4072 return 0; 4073 4074 if (i < logicals_start) 4075 return 0; 4076 4077 /* i is in logicals range, but still within local logicals */ 4078 if ((i - nphysicals - (raid_ctlr_position == 0)) < nlocal_logicals) 4079 return 0; 4080 4081 return 1; /* it's an external lun */ 4082 } 4083 4084 /* 4085 * Do CISS_REPORT_PHYS and CISS_REPORT_LOG. Data is returned in physdev, 4086 * logdev. The number of luns in physdev and logdev are returned in 4087 * *nphysicals and *nlogicals, respectively. 4088 * Returns 0 on success, -1 otherwise. 4089 */ 4090 static int hpsa_gather_lun_info(struct ctlr_info *h, 4091 struct ReportExtendedLUNdata *physdev, u32 *nphysicals, 4092 struct ReportLUNdata *logdev, u32 *nlogicals) 4093 { 4094 if (hpsa_scsi_do_report_phys_luns(h, physdev, sizeof(*physdev))) { 4095 dev_err(&h->pdev->dev, "report physical LUNs failed.\n"); 4096 return -1; 4097 } 4098 *nphysicals = be32_to_cpu(*((__be32 *)physdev->LUNListLength)) / 24; 4099 if (*nphysicals > HPSA_MAX_PHYS_LUN) { 4100 dev_warn(&h->pdev->dev, "maximum physical LUNs (%d) exceeded. %d LUNs ignored.\n", 4101 HPSA_MAX_PHYS_LUN, *nphysicals - HPSA_MAX_PHYS_LUN); 4102 *nphysicals = HPSA_MAX_PHYS_LUN; 4103 } 4104 if (hpsa_scsi_do_report_log_luns(h, logdev, sizeof(*logdev))) { 4105 dev_err(&h->pdev->dev, "report logical LUNs failed.\n"); 4106 return -1; 4107 } 4108 *nlogicals = be32_to_cpu(*((__be32 *) logdev->LUNListLength)) / 8; 4109 /* Reject Logicals in excess of our max capability. */ 4110 if (*nlogicals > HPSA_MAX_LUN) { 4111 dev_warn(&h->pdev->dev, 4112 "maximum logical LUNs (%d) exceeded. " 4113 "%d LUNs ignored.\n", HPSA_MAX_LUN, 4114 *nlogicals - HPSA_MAX_LUN); 4115 *nlogicals = HPSA_MAX_LUN; 4116 } 4117 if (*nlogicals + *nphysicals > HPSA_MAX_PHYS_LUN) { 4118 dev_warn(&h->pdev->dev, 4119 "maximum logical + physical LUNs (%d) exceeded. " 4120 "%d LUNs ignored.\n", HPSA_MAX_PHYS_LUN, 4121 *nphysicals + *nlogicals - HPSA_MAX_PHYS_LUN); 4122 *nlogicals = HPSA_MAX_PHYS_LUN - *nphysicals; 4123 } 4124 return 0; 4125 } 4126 4127 static u8 *figure_lunaddrbytes(struct ctlr_info *h, int raid_ctlr_position, 4128 int i, int nphysicals, int nlogicals, 4129 struct ReportExtendedLUNdata *physdev_list, 4130 struct ReportLUNdata *logdev_list) 4131 { 4132 /* Helper function, figure out where the LUN ID info is coming from 4133 * given index i, lists of physical and logical devices, where in 4134 * the list the raid controller is supposed to appear (first or last) 4135 */ 4136 4137 int logicals_start = nphysicals + (raid_ctlr_position == 0); 4138 int last_device = nphysicals + nlogicals + (raid_ctlr_position == 0); 4139 4140 if (i == raid_ctlr_position) 4141 return RAID_CTLR_LUNID; 4142 4143 if (i < logicals_start) 4144 return &physdev_list->LUN[i - 4145 (raid_ctlr_position == 0)].lunid[0]; 4146 4147 if (i < last_device) 4148 return &logdev_list->LUN[i - nphysicals - 4149 (raid_ctlr_position == 0)][0]; 4150 BUG(); 4151 return NULL; 4152 } 4153 4154 /* get physical drive ioaccel handle and queue depth */ 4155 static void hpsa_get_ioaccel_drive_info(struct ctlr_info *h, 4156 struct hpsa_scsi_dev_t *dev, 4157 struct ReportExtendedLUNdata *rlep, int rle_index, 4158 struct bmic_identify_physical_device *id_phys) 4159 { 4160 int rc; 4161 struct ext_report_lun_entry *rle; 4162 4163 rle = &rlep->LUN[rle_index]; 4164 4165 dev->ioaccel_handle = rle->ioaccel_handle; 4166 if ((rle->device_flags & 0x08) && dev->ioaccel_handle) 4167 dev->hba_ioaccel_enabled = 1; 4168 memset(id_phys, 0, sizeof(*id_phys)); 4169 rc = hpsa_bmic_id_physical_device(h, &rle->lunid[0], 4170 GET_BMIC_DRIVE_NUMBER(&rle->lunid[0]), id_phys, 4171 sizeof(*id_phys)); 4172 if (!rc) 4173 /* Reserve space for FW operations */ 4174 #define DRIVE_CMDS_RESERVED_FOR_FW 2 4175 #define DRIVE_QUEUE_DEPTH 7 4176 dev->queue_depth = 4177 le16_to_cpu(id_phys->current_queue_depth_limit) - 4178 DRIVE_CMDS_RESERVED_FOR_FW; 4179 else 4180 dev->queue_depth = DRIVE_QUEUE_DEPTH; /* conservative */ 4181 } 4182 4183 static void hpsa_get_path_info(struct hpsa_scsi_dev_t *this_device, 4184 struct ReportExtendedLUNdata *rlep, int rle_index, 4185 struct bmic_identify_physical_device *id_phys) 4186 { 4187 struct ext_report_lun_entry *rle = &rlep->LUN[rle_index]; 4188 4189 if ((rle->device_flags & 0x08) && this_device->ioaccel_handle) 4190 this_device->hba_ioaccel_enabled = 1; 4191 4192 memcpy(&this_device->active_path_index, 4193 &id_phys->active_path_number, 4194 sizeof(this_device->active_path_index)); 4195 memcpy(&this_device->path_map, 4196 &id_phys->redundant_path_present_map, 4197 sizeof(this_device->path_map)); 4198 memcpy(&this_device->box, 4199 &id_phys->alternate_paths_phys_box_on_port, 4200 sizeof(this_device->box)); 4201 memcpy(&this_device->phys_connector, 4202 &id_phys->alternate_paths_phys_connector, 4203 sizeof(this_device->phys_connector)); 4204 memcpy(&this_device->bay, 4205 &id_phys->phys_bay_in_box, 4206 sizeof(this_device->bay)); 4207 } 4208 4209 /* get number of local logical disks. */ 4210 static int hpsa_set_local_logical_count(struct ctlr_info *h, 4211 struct bmic_identify_controller *id_ctlr, 4212 u32 *nlocals) 4213 { 4214 int rc; 4215 4216 if (!id_ctlr) { 4217 dev_warn(&h->pdev->dev, "%s: id_ctlr buffer is NULL.\n", 4218 __func__); 4219 return -ENOMEM; 4220 } 4221 memset(id_ctlr, 0, sizeof(*id_ctlr)); 4222 rc = hpsa_bmic_id_controller(h, id_ctlr, sizeof(*id_ctlr)); 4223 if (!rc) 4224 if (id_ctlr->configured_logical_drive_count < 255) 4225 *nlocals = id_ctlr->configured_logical_drive_count; 4226 else 4227 *nlocals = le16_to_cpu( 4228 id_ctlr->extended_logical_unit_count); 4229 else 4230 *nlocals = -1; 4231 return rc; 4232 } 4233 4234 static bool hpsa_is_disk_spare(struct ctlr_info *h, u8 *lunaddrbytes) 4235 { 4236 struct bmic_identify_physical_device *id_phys; 4237 bool is_spare = false; 4238 int rc; 4239 4240 id_phys = kzalloc(sizeof(*id_phys), GFP_KERNEL); 4241 if (!id_phys) 4242 return false; 4243 4244 rc = hpsa_bmic_id_physical_device(h, 4245 lunaddrbytes, 4246 GET_BMIC_DRIVE_NUMBER(lunaddrbytes), 4247 id_phys, sizeof(*id_phys)); 4248 if (rc == 0) 4249 is_spare = (id_phys->more_flags >> 6) & 0x01; 4250 4251 kfree(id_phys); 4252 return is_spare; 4253 } 4254 4255 #define RPL_DEV_FLAG_NON_DISK 0x1 4256 #define RPL_DEV_FLAG_UNCONFIG_DISK_REPORTING_SUPPORTED 0x2 4257 #define RPL_DEV_FLAG_UNCONFIG_DISK 0x4 4258 4259 #define BMIC_DEVICE_TYPE_ENCLOSURE 6 4260 4261 static bool hpsa_skip_device(struct ctlr_info *h, u8 *lunaddrbytes, 4262 struct ext_report_lun_entry *rle) 4263 { 4264 u8 device_flags; 4265 u8 device_type; 4266 4267 if (!MASKED_DEVICE(lunaddrbytes)) 4268 return false; 4269 4270 device_flags = rle->device_flags; 4271 device_type = rle->device_type; 4272 4273 if (device_flags & RPL_DEV_FLAG_NON_DISK) { 4274 if (device_type == BMIC_DEVICE_TYPE_ENCLOSURE) 4275 return false; 4276 return true; 4277 } 4278 4279 if (!(device_flags & RPL_DEV_FLAG_UNCONFIG_DISK_REPORTING_SUPPORTED)) 4280 return false; 4281 4282 if (device_flags & RPL_DEV_FLAG_UNCONFIG_DISK) 4283 return false; 4284 4285 /* 4286 * Spares may be spun down, we do not want to 4287 * do an Inquiry to a RAID set spare drive as 4288 * that would have them spun up, that is a 4289 * performance hit because I/O to the RAID device 4290 * stops while the spin up occurs which can take 4291 * over 50 seconds. 4292 */ 4293 if (hpsa_is_disk_spare(h, lunaddrbytes)) 4294 return true; 4295 4296 return false; 4297 } 4298 4299 static void hpsa_update_scsi_devices(struct ctlr_info *h) 4300 { 4301 /* the idea here is we could get notified 4302 * that some devices have changed, so we do a report 4303 * physical luns and report logical luns cmd, and adjust 4304 * our list of devices accordingly. 4305 * 4306 * The scsi3addr's of devices won't change so long as the 4307 * adapter is not reset. That means we can rescan and 4308 * tell which devices we already know about, vs. new 4309 * devices, vs. disappearing devices. 4310 */ 4311 struct ReportExtendedLUNdata *physdev_list = NULL; 4312 struct ReportLUNdata *logdev_list = NULL; 4313 struct bmic_identify_physical_device *id_phys = NULL; 4314 struct bmic_identify_controller *id_ctlr = NULL; 4315 u32 nphysicals = 0; 4316 u32 nlogicals = 0; 4317 u32 nlocal_logicals = 0; 4318 u32 ndev_allocated = 0; 4319 struct hpsa_scsi_dev_t **currentsd, *this_device, *tmpdevice; 4320 int ncurrent = 0; 4321 int i, n_ext_target_devs, ndevs_to_allocate; 4322 int raid_ctlr_position; 4323 bool physical_device; 4324 DECLARE_BITMAP(lunzerobits, MAX_EXT_TARGETS); 4325 4326 currentsd = kcalloc(HPSA_MAX_DEVICES, sizeof(*currentsd), GFP_KERNEL); 4327 physdev_list = kzalloc(sizeof(*physdev_list), GFP_KERNEL); 4328 logdev_list = kzalloc(sizeof(*logdev_list), GFP_KERNEL); 4329 tmpdevice = kzalloc(sizeof(*tmpdevice), GFP_KERNEL); 4330 id_phys = kzalloc(sizeof(*id_phys), GFP_KERNEL); 4331 id_ctlr = kzalloc(sizeof(*id_ctlr), GFP_KERNEL); 4332 4333 if (!currentsd || !physdev_list || !logdev_list || 4334 !tmpdevice || !id_phys || !id_ctlr) { 4335 dev_err(&h->pdev->dev, "out of memory\n"); 4336 goto out; 4337 } 4338 memset(lunzerobits, 0, sizeof(lunzerobits)); 4339 4340 h->drv_req_rescan = 0; /* cancel scheduled rescan - we're doing it. */ 4341 4342 if (hpsa_gather_lun_info(h, physdev_list, &nphysicals, 4343 logdev_list, &nlogicals)) { 4344 h->drv_req_rescan = 1; 4345 goto out; 4346 } 4347 4348 /* Set number of local logicals (non PTRAID) */ 4349 if (hpsa_set_local_logical_count(h, id_ctlr, &nlocal_logicals)) { 4350 dev_warn(&h->pdev->dev, 4351 "%s: Can't determine number of local logical devices.\n", 4352 __func__); 4353 } 4354 4355 /* We might see up to the maximum number of logical and physical disks 4356 * plus external target devices, and a device for the local RAID 4357 * controller. 4358 */ 4359 ndevs_to_allocate = nphysicals + nlogicals + MAX_EXT_TARGETS + 1; 4360 4361 hpsa_ext_ctrl_present(h, physdev_list); 4362 4363 /* Allocate the per device structures */ 4364 for (i = 0; i < ndevs_to_allocate; i++) { 4365 if (i >= HPSA_MAX_DEVICES) { 4366 dev_warn(&h->pdev->dev, "maximum devices (%d) exceeded." 4367 " %d devices ignored.\n", HPSA_MAX_DEVICES, 4368 ndevs_to_allocate - HPSA_MAX_DEVICES); 4369 break; 4370 } 4371 4372 currentsd[i] = kzalloc(sizeof(*currentsd[i]), GFP_KERNEL); 4373 if (!currentsd[i]) { 4374 h->drv_req_rescan = 1; 4375 goto out; 4376 } 4377 ndev_allocated++; 4378 } 4379 4380 if (is_scsi_rev_5(h)) 4381 raid_ctlr_position = 0; 4382 else 4383 raid_ctlr_position = nphysicals + nlogicals; 4384 4385 /* adjust our table of devices */ 4386 n_ext_target_devs = 0; 4387 for (i = 0; i < nphysicals + nlogicals + 1; i++) { 4388 u8 *lunaddrbytes, is_OBDR = 0; 4389 int rc = 0; 4390 int phys_dev_index = i - (raid_ctlr_position == 0); 4391 bool skip_device = false; 4392 4393 memset(tmpdevice, 0, sizeof(*tmpdevice)); 4394 4395 physical_device = i < nphysicals + (raid_ctlr_position == 0); 4396 4397 /* Figure out where the LUN ID info is coming from */ 4398 lunaddrbytes = figure_lunaddrbytes(h, raid_ctlr_position, 4399 i, nphysicals, nlogicals, physdev_list, logdev_list); 4400 4401 /* Determine if this is a lun from an external target array */ 4402 tmpdevice->external = 4403 figure_external_status(h, raid_ctlr_position, i, 4404 nphysicals, nlocal_logicals); 4405 4406 /* 4407 * Skip over some devices such as a spare. 4408 */ 4409 if (!tmpdevice->external && physical_device) { 4410 skip_device = hpsa_skip_device(h, lunaddrbytes, 4411 &physdev_list->LUN[phys_dev_index]); 4412 if (skip_device) 4413 continue; 4414 } 4415 4416 /* Get device type, vendor, model, device id, raid_map */ 4417 rc = hpsa_update_device_info(h, lunaddrbytes, tmpdevice, 4418 &is_OBDR); 4419 if (rc == -ENOMEM) { 4420 dev_warn(&h->pdev->dev, 4421 "Out of memory, rescan deferred.\n"); 4422 h->drv_req_rescan = 1; 4423 goto out; 4424 } 4425 if (rc) { 4426 h->drv_req_rescan = 1; 4427 continue; 4428 } 4429 4430 figure_bus_target_lun(h, lunaddrbytes, tmpdevice); 4431 this_device = currentsd[ncurrent]; 4432 4433 *this_device = *tmpdevice; 4434 this_device->physical_device = physical_device; 4435 4436 /* 4437 * Expose all devices except for physical devices that 4438 * are masked. 4439 */ 4440 if (MASKED_DEVICE(lunaddrbytes) && this_device->physical_device) 4441 this_device->expose_device = 0; 4442 else 4443 this_device->expose_device = 1; 4444 4445 4446 /* 4447 * Get the SAS address for physical devices that are exposed. 4448 */ 4449 if (this_device->physical_device && this_device->expose_device) 4450 hpsa_get_sas_address(h, lunaddrbytes, this_device); 4451 4452 switch (this_device->devtype) { 4453 case TYPE_ROM: 4454 /* We don't *really* support actual CD-ROM devices, 4455 * just "One Button Disaster Recovery" tape drive 4456 * which temporarily pretends to be a CD-ROM drive. 4457 * So we check that the device is really an OBDR tape 4458 * device by checking for "$DR-10" in bytes 43-48 of 4459 * the inquiry data. 4460 */ 4461 if (is_OBDR) 4462 ncurrent++; 4463 break; 4464 case TYPE_DISK: 4465 case TYPE_ZBC: 4466 if (this_device->physical_device) { 4467 /* The disk is in HBA mode. */ 4468 /* Never use RAID mapper in HBA mode. */ 4469 this_device->offload_enabled = 0; 4470 hpsa_get_ioaccel_drive_info(h, this_device, 4471 physdev_list, phys_dev_index, id_phys); 4472 hpsa_get_path_info(this_device, 4473 physdev_list, phys_dev_index, id_phys); 4474 } 4475 ncurrent++; 4476 break; 4477 case TYPE_TAPE: 4478 case TYPE_MEDIUM_CHANGER: 4479 ncurrent++; 4480 break; 4481 case TYPE_ENCLOSURE: 4482 if (!this_device->external) 4483 hpsa_get_enclosure_info(h, lunaddrbytes, 4484 physdev_list, phys_dev_index, 4485 this_device); 4486 ncurrent++; 4487 break; 4488 case TYPE_RAID: 4489 /* Only present the Smartarray HBA as a RAID controller. 4490 * If it's a RAID controller other than the HBA itself 4491 * (an external RAID controller, MSA500 or similar) 4492 * don't present it. 4493 */ 4494 if (!is_hba_lunid(lunaddrbytes)) 4495 break; 4496 ncurrent++; 4497 break; 4498 default: 4499 break; 4500 } 4501 if (ncurrent >= HPSA_MAX_DEVICES) 4502 break; 4503 } 4504 4505 if (h->sas_host == NULL) { 4506 int rc = 0; 4507 4508 rc = hpsa_add_sas_host(h); 4509 if (rc) { 4510 dev_warn(&h->pdev->dev, 4511 "Could not add sas host %d\n", rc); 4512 goto out; 4513 } 4514 } 4515 4516 adjust_hpsa_scsi_table(h, currentsd, ncurrent); 4517 out: 4518 kfree(tmpdevice); 4519 for (i = 0; i < ndev_allocated; i++) 4520 kfree(currentsd[i]); 4521 kfree(currentsd); 4522 kfree(physdev_list); 4523 kfree(logdev_list); 4524 kfree(id_ctlr); 4525 kfree(id_phys); 4526 } 4527 4528 static void hpsa_set_sg_descriptor(struct SGDescriptor *desc, 4529 struct scatterlist *sg) 4530 { 4531 u64 addr64 = (u64) sg_dma_address(sg); 4532 unsigned int len = sg_dma_len(sg); 4533 4534 desc->Addr = cpu_to_le64(addr64); 4535 desc->Len = cpu_to_le32(len); 4536 desc->Ext = 0; 4537 } 4538 4539 /* 4540 * hpsa_scatter_gather takes a struct scsi_cmnd, (cmd), and does the pci 4541 * dma mapping and fills in the scatter gather entries of the 4542 * hpsa command, cp. 4543 */ 4544 static int hpsa_scatter_gather(struct ctlr_info *h, 4545 struct CommandList *cp, 4546 struct scsi_cmnd *cmd) 4547 { 4548 struct scatterlist *sg; 4549 int use_sg, i, sg_limit, chained, last_sg; 4550 struct SGDescriptor *curr_sg; 4551 4552 BUG_ON(scsi_sg_count(cmd) > h->maxsgentries); 4553 4554 use_sg = scsi_dma_map(cmd); 4555 if (use_sg < 0) 4556 return use_sg; 4557 4558 if (!use_sg) 4559 goto sglist_finished; 4560 4561 /* 4562 * If the number of entries is greater than the max for a single list, 4563 * then we have a chained list; we will set up all but one entry in the 4564 * first list (the last entry is saved for link information); 4565 * otherwise, we don't have a chained list and we'll set up at each of 4566 * the entries in the one list. 4567 */ 4568 curr_sg = cp->SG; 4569 chained = use_sg > h->max_cmd_sg_entries; 4570 sg_limit = chained ? h->max_cmd_sg_entries - 1 : use_sg; 4571 last_sg = scsi_sg_count(cmd) - 1; 4572 scsi_for_each_sg(cmd, sg, sg_limit, i) { 4573 hpsa_set_sg_descriptor(curr_sg, sg); 4574 curr_sg++; 4575 } 4576 4577 if (chained) { 4578 /* 4579 * Continue with the chained list. Set curr_sg to the chained 4580 * list. Modify the limit to the total count less the entries 4581 * we've already set up. Resume the scan at the list entry 4582 * where the previous loop left off. 4583 */ 4584 curr_sg = h->cmd_sg_list[cp->cmdindex]; 4585 sg_limit = use_sg - sg_limit; 4586 for_each_sg(sg, sg, sg_limit, i) { 4587 hpsa_set_sg_descriptor(curr_sg, sg); 4588 curr_sg++; 4589 } 4590 } 4591 4592 /* Back the pointer up to the last entry and mark it as "last". */ 4593 (curr_sg - 1)->Ext = cpu_to_le32(HPSA_SG_LAST); 4594 4595 if (use_sg + chained > h->maxSG) 4596 h->maxSG = use_sg + chained; 4597 4598 if (chained) { 4599 cp->Header.SGList = h->max_cmd_sg_entries; 4600 cp->Header.SGTotal = cpu_to_le16(use_sg + 1); 4601 if (hpsa_map_sg_chain_block(h, cp)) { 4602 scsi_dma_unmap(cmd); 4603 return -1; 4604 } 4605 return 0; 4606 } 4607 4608 sglist_finished: 4609 4610 cp->Header.SGList = (u8) use_sg; /* no. SGs contig in this cmd */ 4611 cp->Header.SGTotal = cpu_to_le16(use_sg); /* total sgs in cmd list */ 4612 return 0; 4613 } 4614 4615 static inline void warn_zero_length_transfer(struct ctlr_info *h, 4616 u8 *cdb, int cdb_len, 4617 const char *func) 4618 { 4619 dev_warn(&h->pdev->dev, 4620 "%s: Blocking zero-length request: CDB:%*phN\n", 4621 func, cdb_len, cdb); 4622 } 4623 4624 #define IO_ACCEL_INELIGIBLE 1 4625 /* zero-length transfers trigger hardware errors. */ 4626 static bool is_zero_length_transfer(u8 *cdb) 4627 { 4628 u32 block_cnt; 4629 4630 /* Block zero-length transfer sizes on certain commands. */ 4631 switch (cdb[0]) { 4632 case READ_10: 4633 case WRITE_10: 4634 case VERIFY: /* 0x2F */ 4635 case WRITE_VERIFY: /* 0x2E */ 4636 block_cnt = get_unaligned_be16(&cdb[7]); 4637 break; 4638 case READ_12: 4639 case WRITE_12: 4640 case VERIFY_12: /* 0xAF */ 4641 case WRITE_VERIFY_12: /* 0xAE */ 4642 block_cnt = get_unaligned_be32(&cdb[6]); 4643 break; 4644 case READ_16: 4645 case WRITE_16: 4646 case VERIFY_16: /* 0x8F */ 4647 block_cnt = get_unaligned_be32(&cdb[10]); 4648 break; 4649 default: 4650 return false; 4651 } 4652 4653 return block_cnt == 0; 4654 } 4655 4656 static int fixup_ioaccel_cdb(u8 *cdb, int *cdb_len) 4657 { 4658 int is_write = 0; 4659 u32 block; 4660 u32 block_cnt; 4661 4662 /* Perform some CDB fixups if needed using 10 byte reads/writes only */ 4663 switch (cdb[0]) { 4664 case WRITE_6: 4665 case WRITE_12: 4666 is_write = 1; 4667 /* fall through */ 4668 case READ_6: 4669 case READ_12: 4670 if (*cdb_len == 6) { 4671 block = (((cdb[1] & 0x1F) << 16) | 4672 (cdb[2] << 8) | 4673 cdb[3]); 4674 block_cnt = cdb[4]; 4675 if (block_cnt == 0) 4676 block_cnt = 256; 4677 } else { 4678 BUG_ON(*cdb_len != 12); 4679 block = get_unaligned_be32(&cdb[2]); 4680 block_cnt = get_unaligned_be32(&cdb[6]); 4681 } 4682 if (block_cnt > 0xffff) 4683 return IO_ACCEL_INELIGIBLE; 4684 4685 cdb[0] = is_write ? WRITE_10 : READ_10; 4686 cdb[1] = 0; 4687 cdb[2] = (u8) (block >> 24); 4688 cdb[3] = (u8) (block >> 16); 4689 cdb[4] = (u8) (block >> 8); 4690 cdb[5] = (u8) (block); 4691 cdb[6] = 0; 4692 cdb[7] = (u8) (block_cnt >> 8); 4693 cdb[8] = (u8) (block_cnt); 4694 cdb[9] = 0; 4695 *cdb_len = 10; 4696 break; 4697 } 4698 return 0; 4699 } 4700 4701 static int hpsa_scsi_ioaccel1_queue_command(struct ctlr_info *h, 4702 struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len, 4703 u8 *scsi3addr, struct hpsa_scsi_dev_t *phys_disk) 4704 { 4705 struct scsi_cmnd *cmd = c->scsi_cmd; 4706 struct io_accel1_cmd *cp = &h->ioaccel_cmd_pool[c->cmdindex]; 4707 unsigned int len; 4708 unsigned int total_len = 0; 4709 struct scatterlist *sg; 4710 u64 addr64; 4711 int use_sg, i; 4712 struct SGDescriptor *curr_sg; 4713 u32 control = IOACCEL1_CONTROL_SIMPLEQUEUE; 4714 4715 /* TODO: implement chaining support */ 4716 if (scsi_sg_count(cmd) > h->ioaccel_maxsg) { 4717 atomic_dec(&phys_disk->ioaccel_cmds_out); 4718 return IO_ACCEL_INELIGIBLE; 4719 } 4720 4721 BUG_ON(cmd->cmd_len > IOACCEL1_IOFLAGS_CDBLEN_MAX); 4722 4723 if (is_zero_length_transfer(cdb)) { 4724 warn_zero_length_transfer(h, cdb, cdb_len, __func__); 4725 atomic_dec(&phys_disk->ioaccel_cmds_out); 4726 return IO_ACCEL_INELIGIBLE; 4727 } 4728 4729 if (fixup_ioaccel_cdb(cdb, &cdb_len)) { 4730 atomic_dec(&phys_disk->ioaccel_cmds_out); 4731 return IO_ACCEL_INELIGIBLE; 4732 } 4733 4734 c->cmd_type = CMD_IOACCEL1; 4735 4736 /* Adjust the DMA address to point to the accelerated command buffer */ 4737 c->busaddr = (u32) h->ioaccel_cmd_pool_dhandle + 4738 (c->cmdindex * sizeof(*cp)); 4739 BUG_ON(c->busaddr & 0x0000007F); 4740 4741 use_sg = scsi_dma_map(cmd); 4742 if (use_sg < 0) { 4743 atomic_dec(&phys_disk->ioaccel_cmds_out); 4744 return use_sg; 4745 } 4746 4747 if (use_sg) { 4748 curr_sg = cp->SG; 4749 scsi_for_each_sg(cmd, sg, use_sg, i) { 4750 addr64 = (u64) sg_dma_address(sg); 4751 len = sg_dma_len(sg); 4752 total_len += len; 4753 curr_sg->Addr = cpu_to_le64(addr64); 4754 curr_sg->Len = cpu_to_le32(len); 4755 curr_sg->Ext = cpu_to_le32(0); 4756 curr_sg++; 4757 } 4758 (--curr_sg)->Ext = cpu_to_le32(HPSA_SG_LAST); 4759 4760 switch (cmd->sc_data_direction) { 4761 case DMA_TO_DEVICE: 4762 control |= IOACCEL1_CONTROL_DATA_OUT; 4763 break; 4764 case DMA_FROM_DEVICE: 4765 control |= IOACCEL1_CONTROL_DATA_IN; 4766 break; 4767 case DMA_NONE: 4768 control |= IOACCEL1_CONTROL_NODATAXFER; 4769 break; 4770 default: 4771 dev_err(&h->pdev->dev, "unknown data direction: %d\n", 4772 cmd->sc_data_direction); 4773 BUG(); 4774 break; 4775 } 4776 } else { 4777 control |= IOACCEL1_CONTROL_NODATAXFER; 4778 } 4779 4780 c->Header.SGList = use_sg; 4781 /* Fill out the command structure to submit */ 4782 cp->dev_handle = cpu_to_le16(ioaccel_handle & 0xFFFF); 4783 cp->transfer_len = cpu_to_le32(total_len); 4784 cp->io_flags = cpu_to_le16(IOACCEL1_IOFLAGS_IO_REQ | 4785 (cdb_len & IOACCEL1_IOFLAGS_CDBLEN_MASK)); 4786 cp->control = cpu_to_le32(control); 4787 memcpy(cp->CDB, cdb, cdb_len); 4788 memcpy(cp->CISS_LUN, scsi3addr, 8); 4789 /* Tag was already set at init time. */ 4790 enqueue_cmd_and_start_io(h, c); 4791 return 0; 4792 } 4793 4794 /* 4795 * Queue a command directly to a device behind the controller using the 4796 * I/O accelerator path. 4797 */ 4798 static int hpsa_scsi_ioaccel_direct_map(struct ctlr_info *h, 4799 struct CommandList *c) 4800 { 4801 struct scsi_cmnd *cmd = c->scsi_cmd; 4802 struct hpsa_scsi_dev_t *dev = cmd->device->hostdata; 4803 4804 if (!dev) 4805 return -1; 4806 4807 c->phys_disk = dev; 4808 4809 if (dev->in_reset) 4810 return -1; 4811 4812 return hpsa_scsi_ioaccel_queue_command(h, c, dev->ioaccel_handle, 4813 cmd->cmnd, cmd->cmd_len, dev->scsi3addr, dev); 4814 } 4815 4816 /* 4817 * Set encryption parameters for the ioaccel2 request 4818 */ 4819 static void set_encrypt_ioaccel2(struct ctlr_info *h, 4820 struct CommandList *c, struct io_accel2_cmd *cp) 4821 { 4822 struct scsi_cmnd *cmd = c->scsi_cmd; 4823 struct hpsa_scsi_dev_t *dev = cmd->device->hostdata; 4824 struct raid_map_data *map = &dev->raid_map; 4825 u64 first_block; 4826 4827 /* Are we doing encryption on this device */ 4828 if (!(le16_to_cpu(map->flags) & RAID_MAP_FLAG_ENCRYPT_ON)) 4829 return; 4830 /* Set the data encryption key index. */ 4831 cp->dekindex = map->dekindex; 4832 4833 /* Set the encryption enable flag, encoded into direction field. */ 4834 cp->direction |= IOACCEL2_DIRECTION_ENCRYPT_MASK; 4835 4836 /* Set encryption tweak values based on logical block address 4837 * If block size is 512, tweak value is LBA. 4838 * For other block sizes, tweak is (LBA * block size)/ 512) 4839 */ 4840 switch (cmd->cmnd[0]) { 4841 /* Required? 6-byte cdbs eliminated by fixup_ioaccel_cdb */ 4842 case READ_6: 4843 case WRITE_6: 4844 first_block = (((cmd->cmnd[1] & 0x1F) << 16) | 4845 (cmd->cmnd[2] << 8) | 4846 cmd->cmnd[3]); 4847 break; 4848 case WRITE_10: 4849 case READ_10: 4850 /* Required? 12-byte cdbs eliminated by fixup_ioaccel_cdb */ 4851 case WRITE_12: 4852 case READ_12: 4853 first_block = get_unaligned_be32(&cmd->cmnd[2]); 4854 break; 4855 case WRITE_16: 4856 case READ_16: 4857 first_block = get_unaligned_be64(&cmd->cmnd[2]); 4858 break; 4859 default: 4860 dev_err(&h->pdev->dev, 4861 "ERROR: %s: size (0x%x) not supported for encryption\n", 4862 __func__, cmd->cmnd[0]); 4863 BUG(); 4864 break; 4865 } 4866 4867 if (le32_to_cpu(map->volume_blk_size) != 512) 4868 first_block = first_block * 4869 le32_to_cpu(map->volume_blk_size)/512; 4870 4871 cp->tweak_lower = cpu_to_le32(first_block); 4872 cp->tweak_upper = cpu_to_le32(first_block >> 32); 4873 } 4874 4875 static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h, 4876 struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len, 4877 u8 *scsi3addr, struct hpsa_scsi_dev_t *phys_disk) 4878 { 4879 struct scsi_cmnd *cmd = c->scsi_cmd; 4880 struct io_accel2_cmd *cp = &h->ioaccel2_cmd_pool[c->cmdindex]; 4881 struct ioaccel2_sg_element *curr_sg; 4882 int use_sg, i; 4883 struct scatterlist *sg; 4884 u64 addr64; 4885 u32 len; 4886 u32 total_len = 0; 4887 4888 if (!cmd->device) 4889 return -1; 4890 4891 if (!cmd->device->hostdata) 4892 return -1; 4893 4894 BUG_ON(scsi_sg_count(cmd) > h->maxsgentries); 4895 4896 if (is_zero_length_transfer(cdb)) { 4897 warn_zero_length_transfer(h, cdb, cdb_len, __func__); 4898 atomic_dec(&phys_disk->ioaccel_cmds_out); 4899 return IO_ACCEL_INELIGIBLE; 4900 } 4901 4902 if (fixup_ioaccel_cdb(cdb, &cdb_len)) { 4903 atomic_dec(&phys_disk->ioaccel_cmds_out); 4904 return IO_ACCEL_INELIGIBLE; 4905 } 4906 4907 c->cmd_type = CMD_IOACCEL2; 4908 /* Adjust the DMA address to point to the accelerated command buffer */ 4909 c->busaddr = (u32) h->ioaccel2_cmd_pool_dhandle + 4910 (c->cmdindex * sizeof(*cp)); 4911 BUG_ON(c->busaddr & 0x0000007F); 4912 4913 memset(cp, 0, sizeof(*cp)); 4914 cp->IU_type = IOACCEL2_IU_TYPE; 4915 4916 use_sg = scsi_dma_map(cmd); 4917 if (use_sg < 0) { 4918 atomic_dec(&phys_disk->ioaccel_cmds_out); 4919 return use_sg; 4920 } 4921 4922 if (use_sg) { 4923 curr_sg = cp->sg; 4924 if (use_sg > h->ioaccel_maxsg) { 4925 addr64 = le64_to_cpu( 4926 h->ioaccel2_cmd_sg_list[c->cmdindex]->address); 4927 curr_sg->address = cpu_to_le64(addr64); 4928 curr_sg->length = 0; 4929 curr_sg->reserved[0] = 0; 4930 curr_sg->reserved[1] = 0; 4931 curr_sg->reserved[2] = 0; 4932 curr_sg->chain_indicator = IOACCEL2_CHAIN; 4933 4934 curr_sg = h->ioaccel2_cmd_sg_list[c->cmdindex]; 4935 } 4936 scsi_for_each_sg(cmd, sg, use_sg, i) { 4937 addr64 = (u64) sg_dma_address(sg); 4938 len = sg_dma_len(sg); 4939 total_len += len; 4940 curr_sg->address = cpu_to_le64(addr64); 4941 curr_sg->length = cpu_to_le32(len); 4942 curr_sg->reserved[0] = 0; 4943 curr_sg->reserved[1] = 0; 4944 curr_sg->reserved[2] = 0; 4945 curr_sg->chain_indicator = 0; 4946 curr_sg++; 4947 } 4948 4949 /* 4950 * Set the last s/g element bit 4951 */ 4952 (curr_sg - 1)->chain_indicator = IOACCEL2_LAST_SG; 4953 4954 switch (cmd->sc_data_direction) { 4955 case DMA_TO_DEVICE: 4956 cp->direction &= ~IOACCEL2_DIRECTION_MASK; 4957 cp->direction |= IOACCEL2_DIR_DATA_OUT; 4958 break; 4959 case DMA_FROM_DEVICE: 4960 cp->direction &= ~IOACCEL2_DIRECTION_MASK; 4961 cp->direction |= IOACCEL2_DIR_DATA_IN; 4962 break; 4963 case DMA_NONE: 4964 cp->direction &= ~IOACCEL2_DIRECTION_MASK; 4965 cp->direction |= IOACCEL2_DIR_NO_DATA; 4966 break; 4967 default: 4968 dev_err(&h->pdev->dev, "unknown data direction: %d\n", 4969 cmd->sc_data_direction); 4970 BUG(); 4971 break; 4972 } 4973 } else { 4974 cp->direction &= ~IOACCEL2_DIRECTION_MASK; 4975 cp->direction |= IOACCEL2_DIR_NO_DATA; 4976 } 4977 4978 /* Set encryption parameters, if necessary */ 4979 set_encrypt_ioaccel2(h, c, cp); 4980 4981 cp->scsi_nexus = cpu_to_le32(ioaccel_handle); 4982 cp->Tag = cpu_to_le32(c->cmdindex << DIRECT_LOOKUP_SHIFT); 4983 memcpy(cp->cdb, cdb, sizeof(cp->cdb)); 4984 4985 cp->data_len = cpu_to_le32(total_len); 4986 cp->err_ptr = cpu_to_le64(c->busaddr + 4987 offsetof(struct io_accel2_cmd, error_data)); 4988 cp->err_len = cpu_to_le32(sizeof(cp->error_data)); 4989 4990 /* fill in sg elements */ 4991 if (use_sg > h->ioaccel_maxsg) { 4992 cp->sg_count = 1; 4993 cp->sg[0].length = cpu_to_le32(use_sg * sizeof(cp->sg[0])); 4994 if (hpsa_map_ioaccel2_sg_chain_block(h, cp, c)) { 4995 atomic_dec(&phys_disk->ioaccel_cmds_out); 4996 scsi_dma_unmap(cmd); 4997 return -1; 4998 } 4999 } else 5000 cp->sg_count = (u8) use_sg; 5001 5002 if (phys_disk->in_reset) { 5003 cmd->result = DID_RESET << 16; 5004 return -1; 5005 } 5006 5007 enqueue_cmd_and_start_io(h, c); 5008 return 0; 5009 } 5010 5011 /* 5012 * Queue a command to the correct I/O accelerator path. 5013 */ 5014 static int hpsa_scsi_ioaccel_queue_command(struct ctlr_info *h, 5015 struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len, 5016 u8 *scsi3addr, struct hpsa_scsi_dev_t *phys_disk) 5017 { 5018 if (!c->scsi_cmd->device) 5019 return -1; 5020 5021 if (!c->scsi_cmd->device->hostdata) 5022 return -1; 5023 5024 if (phys_disk->in_reset) 5025 return -1; 5026 5027 /* Try to honor the device's queue depth */ 5028 if (atomic_inc_return(&phys_disk->ioaccel_cmds_out) > 5029 phys_disk->queue_depth) { 5030 atomic_dec(&phys_disk->ioaccel_cmds_out); 5031 return IO_ACCEL_INELIGIBLE; 5032 } 5033 if (h->transMethod & CFGTBL_Trans_io_accel1) 5034 return hpsa_scsi_ioaccel1_queue_command(h, c, ioaccel_handle, 5035 cdb, cdb_len, scsi3addr, 5036 phys_disk); 5037 else 5038 return hpsa_scsi_ioaccel2_queue_command(h, c, ioaccel_handle, 5039 cdb, cdb_len, scsi3addr, 5040 phys_disk); 5041 } 5042 5043 static void raid_map_helper(struct raid_map_data *map, 5044 int offload_to_mirror, u32 *map_index, u32 *current_group) 5045 { 5046 if (offload_to_mirror == 0) { 5047 /* use physical disk in the first mirrored group. */ 5048 *map_index %= le16_to_cpu(map->data_disks_per_row); 5049 return; 5050 } 5051 do { 5052 /* determine mirror group that *map_index indicates */ 5053 *current_group = *map_index / 5054 le16_to_cpu(map->data_disks_per_row); 5055 if (offload_to_mirror == *current_group) 5056 continue; 5057 if (*current_group < le16_to_cpu(map->layout_map_count) - 1) { 5058 /* select map index from next group */ 5059 *map_index += le16_to_cpu(map->data_disks_per_row); 5060 (*current_group)++; 5061 } else { 5062 /* select map index from first group */ 5063 *map_index %= le16_to_cpu(map->data_disks_per_row); 5064 *current_group = 0; 5065 } 5066 } while (offload_to_mirror != *current_group); 5067 } 5068 5069 /* 5070 * Attempt to perform offload RAID mapping for a logical volume I/O. 5071 */ 5072 static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h, 5073 struct CommandList *c) 5074 { 5075 struct scsi_cmnd *cmd = c->scsi_cmd; 5076 struct hpsa_scsi_dev_t *dev = cmd->device->hostdata; 5077 struct raid_map_data *map = &dev->raid_map; 5078 struct raid_map_disk_data *dd = &map->data[0]; 5079 int is_write = 0; 5080 u32 map_index; 5081 u64 first_block, last_block; 5082 u32 block_cnt; 5083 u32 blocks_per_row; 5084 u64 first_row, last_row; 5085 u32 first_row_offset, last_row_offset; 5086 u32 first_column, last_column; 5087 u64 r0_first_row, r0_last_row; 5088 u32 r5or6_blocks_per_row; 5089 u64 r5or6_first_row, r5or6_last_row; 5090 u32 r5or6_first_row_offset, r5or6_last_row_offset; 5091 u32 r5or6_first_column, r5or6_last_column; 5092 u32 total_disks_per_row; 5093 u32 stripesize; 5094 u32 first_group, last_group, current_group; 5095 u32 map_row; 5096 u32 disk_handle; 5097 u64 disk_block; 5098 u32 disk_block_cnt; 5099 u8 cdb[16]; 5100 u8 cdb_len; 5101 u16 strip_size; 5102 #if BITS_PER_LONG == 32 5103 u64 tmpdiv; 5104 #endif 5105 int offload_to_mirror; 5106 5107 if (!dev) 5108 return -1; 5109 5110 if (dev->in_reset) 5111 return -1; 5112 5113 /* check for valid opcode, get LBA and block count */ 5114 switch (cmd->cmnd[0]) { 5115 case WRITE_6: 5116 is_write = 1; 5117 /* fall through */ 5118 case READ_6: 5119 first_block = (((cmd->cmnd[1] & 0x1F) << 16) | 5120 (cmd->cmnd[2] << 8) | 5121 cmd->cmnd[3]); 5122 block_cnt = cmd->cmnd[4]; 5123 if (block_cnt == 0) 5124 block_cnt = 256; 5125 break; 5126 case WRITE_10: 5127 is_write = 1; 5128 /* fall through */ 5129 case READ_10: 5130 first_block = 5131 (((u64) cmd->cmnd[2]) << 24) | 5132 (((u64) cmd->cmnd[3]) << 16) | 5133 (((u64) cmd->cmnd[4]) << 8) | 5134 cmd->cmnd[5]; 5135 block_cnt = 5136 (((u32) cmd->cmnd[7]) << 8) | 5137 cmd->cmnd[8]; 5138 break; 5139 case WRITE_12: 5140 is_write = 1; 5141 /* fall through */ 5142 case READ_12: 5143 first_block = 5144 (((u64) cmd->cmnd[2]) << 24) | 5145 (((u64) cmd->cmnd[3]) << 16) | 5146 (((u64) cmd->cmnd[4]) << 8) | 5147 cmd->cmnd[5]; 5148 block_cnt = 5149 (((u32) cmd->cmnd[6]) << 24) | 5150 (((u32) cmd->cmnd[7]) << 16) | 5151 (((u32) cmd->cmnd[8]) << 8) | 5152 cmd->cmnd[9]; 5153 break; 5154 case WRITE_16: 5155 is_write = 1; 5156 /* fall through */ 5157 case READ_16: 5158 first_block = 5159 (((u64) cmd->cmnd[2]) << 56) | 5160 (((u64) cmd->cmnd[3]) << 48) | 5161 (((u64) cmd->cmnd[4]) << 40) | 5162 (((u64) cmd->cmnd[5]) << 32) | 5163 (((u64) cmd->cmnd[6]) << 24) | 5164 (((u64) cmd->cmnd[7]) << 16) | 5165 (((u64) cmd->cmnd[8]) << 8) | 5166 cmd->cmnd[9]; 5167 block_cnt = 5168 (((u32) cmd->cmnd[10]) << 24) | 5169 (((u32) cmd->cmnd[11]) << 16) | 5170 (((u32) cmd->cmnd[12]) << 8) | 5171 cmd->cmnd[13]; 5172 break; 5173 default: 5174 return IO_ACCEL_INELIGIBLE; /* process via normal I/O path */ 5175 } 5176 last_block = first_block + block_cnt - 1; 5177 5178 /* check for write to non-RAID-0 */ 5179 if (is_write && dev->raid_level != 0) 5180 return IO_ACCEL_INELIGIBLE; 5181 5182 /* check for invalid block or wraparound */ 5183 if (last_block >= le64_to_cpu(map->volume_blk_cnt) || 5184 last_block < first_block) 5185 return IO_ACCEL_INELIGIBLE; 5186 5187 /* calculate stripe information for the request */ 5188 blocks_per_row = le16_to_cpu(map->data_disks_per_row) * 5189 le16_to_cpu(map->strip_size); 5190 strip_size = le16_to_cpu(map->strip_size); 5191 #if BITS_PER_LONG == 32 5192 tmpdiv = first_block; 5193 (void) do_div(tmpdiv, blocks_per_row); 5194 first_row = tmpdiv; 5195 tmpdiv = last_block; 5196 (void) do_div(tmpdiv, blocks_per_row); 5197 last_row = tmpdiv; 5198 first_row_offset = (u32) (first_block - (first_row * blocks_per_row)); 5199 last_row_offset = (u32) (last_block - (last_row * blocks_per_row)); 5200 tmpdiv = first_row_offset; 5201 (void) do_div(tmpdiv, strip_size); 5202 first_column = tmpdiv; 5203 tmpdiv = last_row_offset; 5204 (void) do_div(tmpdiv, strip_size); 5205 last_column = tmpdiv; 5206 #else 5207 first_row = first_block / blocks_per_row; 5208 last_row = last_block / blocks_per_row; 5209 first_row_offset = (u32) (first_block - (first_row * blocks_per_row)); 5210 last_row_offset = (u32) (last_block - (last_row * blocks_per_row)); 5211 first_column = first_row_offset / strip_size; 5212 last_column = last_row_offset / strip_size; 5213 #endif 5214 5215 /* if this isn't a single row/column then give to the controller */ 5216 if ((first_row != last_row) || (first_column != last_column)) 5217 return IO_ACCEL_INELIGIBLE; 5218 5219 /* proceeding with driver mapping */ 5220 total_disks_per_row = le16_to_cpu(map->data_disks_per_row) + 5221 le16_to_cpu(map->metadata_disks_per_row); 5222 map_row = ((u32)(first_row >> map->parity_rotation_shift)) % 5223 le16_to_cpu(map->row_cnt); 5224 map_index = (map_row * total_disks_per_row) + first_column; 5225 5226 switch (dev->raid_level) { 5227 case HPSA_RAID_0: 5228 break; /* nothing special to do */ 5229 case HPSA_RAID_1: 5230 /* Handles load balance across RAID 1 members. 5231 * (2-drive R1 and R10 with even # of drives.) 5232 * Appropriate for SSDs, not optimal for HDDs 5233 */ 5234 BUG_ON(le16_to_cpu(map->layout_map_count) != 2); 5235 if (dev->offload_to_mirror) 5236 map_index += le16_to_cpu(map->data_disks_per_row); 5237 dev->offload_to_mirror = !dev->offload_to_mirror; 5238 break; 5239 case HPSA_RAID_ADM: 5240 /* Handles N-way mirrors (R1-ADM) 5241 * and R10 with # of drives divisible by 3.) 5242 */ 5243 BUG_ON(le16_to_cpu(map->layout_map_count) != 3); 5244 5245 offload_to_mirror = dev->offload_to_mirror; 5246 raid_map_helper(map, offload_to_mirror, 5247 &map_index, ¤t_group); 5248 /* set mirror group to use next time */ 5249 offload_to_mirror = 5250 (offload_to_mirror >= 5251 le16_to_cpu(map->layout_map_count) - 1) 5252 ? 0 : offload_to_mirror + 1; 5253 dev->offload_to_mirror = offload_to_mirror; 5254 /* Avoid direct use of dev->offload_to_mirror within this 5255 * function since multiple threads might simultaneously 5256 * increment it beyond the range of dev->layout_map_count -1. 5257 */ 5258 break; 5259 case HPSA_RAID_5: 5260 case HPSA_RAID_6: 5261 if (le16_to_cpu(map->layout_map_count) <= 1) 5262 break; 5263 5264 /* Verify first and last block are in same RAID group */ 5265 r5or6_blocks_per_row = 5266 le16_to_cpu(map->strip_size) * 5267 le16_to_cpu(map->data_disks_per_row); 5268 BUG_ON(r5or6_blocks_per_row == 0); 5269 stripesize = r5or6_blocks_per_row * 5270 le16_to_cpu(map->layout_map_count); 5271 #if BITS_PER_LONG == 32 5272 tmpdiv = first_block; 5273 first_group = do_div(tmpdiv, stripesize); 5274 tmpdiv = first_group; 5275 (void) do_div(tmpdiv, r5or6_blocks_per_row); 5276 first_group = tmpdiv; 5277 tmpdiv = last_block; 5278 last_group = do_div(tmpdiv, stripesize); 5279 tmpdiv = last_group; 5280 (void) do_div(tmpdiv, r5or6_blocks_per_row); 5281 last_group = tmpdiv; 5282 #else 5283 first_group = (first_block % stripesize) / r5or6_blocks_per_row; 5284 last_group = (last_block % stripesize) / r5or6_blocks_per_row; 5285 #endif 5286 if (first_group != last_group) 5287 return IO_ACCEL_INELIGIBLE; 5288 5289 /* Verify request is in a single row of RAID 5/6 */ 5290 #if BITS_PER_LONG == 32 5291 tmpdiv = first_block; 5292 (void) do_div(tmpdiv, stripesize); 5293 first_row = r5or6_first_row = r0_first_row = tmpdiv; 5294 tmpdiv = last_block; 5295 (void) do_div(tmpdiv, stripesize); 5296 r5or6_last_row = r0_last_row = tmpdiv; 5297 #else 5298 first_row = r5or6_first_row = r0_first_row = 5299 first_block / stripesize; 5300 r5or6_last_row = r0_last_row = last_block / stripesize; 5301 #endif 5302 if (r5or6_first_row != r5or6_last_row) 5303 return IO_ACCEL_INELIGIBLE; 5304 5305 5306 /* Verify request is in a single column */ 5307 #if BITS_PER_LONG == 32 5308 tmpdiv = first_block; 5309 first_row_offset = do_div(tmpdiv, stripesize); 5310 tmpdiv = first_row_offset; 5311 first_row_offset = (u32) do_div(tmpdiv, r5or6_blocks_per_row); 5312 r5or6_first_row_offset = first_row_offset; 5313 tmpdiv = last_block; 5314 r5or6_last_row_offset = do_div(tmpdiv, stripesize); 5315 tmpdiv = r5or6_last_row_offset; 5316 r5or6_last_row_offset = do_div(tmpdiv, r5or6_blocks_per_row); 5317 tmpdiv = r5or6_first_row_offset; 5318 (void) do_div(tmpdiv, map->strip_size); 5319 first_column = r5or6_first_column = tmpdiv; 5320 tmpdiv = r5or6_last_row_offset; 5321 (void) do_div(tmpdiv, map->strip_size); 5322 r5or6_last_column = tmpdiv; 5323 #else 5324 first_row_offset = r5or6_first_row_offset = 5325 (u32)((first_block % stripesize) % 5326 r5or6_blocks_per_row); 5327 5328 r5or6_last_row_offset = 5329 (u32)((last_block % stripesize) % 5330 r5or6_blocks_per_row); 5331 5332 first_column = r5or6_first_column = 5333 r5or6_first_row_offset / le16_to_cpu(map->strip_size); 5334 r5or6_last_column = 5335 r5or6_last_row_offset / le16_to_cpu(map->strip_size); 5336 #endif 5337 if (r5or6_first_column != r5or6_last_column) 5338 return IO_ACCEL_INELIGIBLE; 5339 5340 /* Request is eligible */ 5341 map_row = ((u32)(first_row >> map->parity_rotation_shift)) % 5342 le16_to_cpu(map->row_cnt); 5343 5344 map_index = (first_group * 5345 (le16_to_cpu(map->row_cnt) * total_disks_per_row)) + 5346 (map_row * total_disks_per_row) + first_column; 5347 break; 5348 default: 5349 return IO_ACCEL_INELIGIBLE; 5350 } 5351 5352 if (unlikely(map_index >= RAID_MAP_MAX_ENTRIES)) 5353 return IO_ACCEL_INELIGIBLE; 5354 5355 c->phys_disk = dev->phys_disk[map_index]; 5356 if (!c->phys_disk) 5357 return IO_ACCEL_INELIGIBLE; 5358 5359 disk_handle = dd[map_index].ioaccel_handle; 5360 disk_block = le64_to_cpu(map->disk_starting_blk) + 5361 first_row * le16_to_cpu(map->strip_size) + 5362 (first_row_offset - first_column * 5363 le16_to_cpu(map->strip_size)); 5364 disk_block_cnt = block_cnt; 5365 5366 /* handle differing logical/physical block sizes */ 5367 if (map->phys_blk_shift) { 5368 disk_block <<= map->phys_blk_shift; 5369 disk_block_cnt <<= map->phys_blk_shift; 5370 } 5371 BUG_ON(disk_block_cnt > 0xffff); 5372 5373 /* build the new CDB for the physical disk I/O */ 5374 if (disk_block > 0xffffffff) { 5375 cdb[0] = is_write ? WRITE_16 : READ_16; 5376 cdb[1] = 0; 5377 cdb[2] = (u8) (disk_block >> 56); 5378 cdb[3] = (u8) (disk_block >> 48); 5379 cdb[4] = (u8) (disk_block >> 40); 5380 cdb[5] = (u8) (disk_block >> 32); 5381 cdb[6] = (u8) (disk_block >> 24); 5382 cdb[7] = (u8) (disk_block >> 16); 5383 cdb[8] = (u8) (disk_block >> 8); 5384 cdb[9] = (u8) (disk_block); 5385 cdb[10] = (u8) (disk_block_cnt >> 24); 5386 cdb[11] = (u8) (disk_block_cnt >> 16); 5387 cdb[12] = (u8) (disk_block_cnt >> 8); 5388 cdb[13] = (u8) (disk_block_cnt); 5389 cdb[14] = 0; 5390 cdb[15] = 0; 5391 cdb_len = 16; 5392 } else { 5393 cdb[0] = is_write ? WRITE_10 : READ_10; 5394 cdb[1] = 0; 5395 cdb[2] = (u8) (disk_block >> 24); 5396 cdb[3] = (u8) (disk_block >> 16); 5397 cdb[4] = (u8) (disk_block >> 8); 5398 cdb[5] = (u8) (disk_block); 5399 cdb[6] = 0; 5400 cdb[7] = (u8) (disk_block_cnt >> 8); 5401 cdb[8] = (u8) (disk_block_cnt); 5402 cdb[9] = 0; 5403 cdb_len = 10; 5404 } 5405 return hpsa_scsi_ioaccel_queue_command(h, c, disk_handle, cdb, cdb_len, 5406 dev->scsi3addr, 5407 dev->phys_disk[map_index]); 5408 } 5409 5410 /* 5411 * Submit commands down the "normal" RAID stack path 5412 * All callers to hpsa_ciss_submit must check lockup_detected 5413 * beforehand, before (opt.) and after calling cmd_alloc 5414 */ 5415 static int hpsa_ciss_submit(struct ctlr_info *h, 5416 struct CommandList *c, struct scsi_cmnd *cmd, 5417 struct hpsa_scsi_dev_t *dev) 5418 { 5419 cmd->host_scribble = (unsigned char *) c; 5420 c->cmd_type = CMD_SCSI; 5421 c->scsi_cmd = cmd; 5422 c->Header.ReplyQueue = 0; /* unused in simple mode */ 5423 memcpy(&c->Header.LUN.LunAddrBytes[0], &dev->scsi3addr[0], 8); 5424 c->Header.tag = cpu_to_le64((c->cmdindex << DIRECT_LOOKUP_SHIFT)); 5425 5426 /* Fill in the request block... */ 5427 5428 c->Request.Timeout = 0; 5429 BUG_ON(cmd->cmd_len > sizeof(c->Request.CDB)); 5430 c->Request.CDBLen = cmd->cmd_len; 5431 memcpy(c->Request.CDB, cmd->cmnd, cmd->cmd_len); 5432 switch (cmd->sc_data_direction) { 5433 case DMA_TO_DEVICE: 5434 c->Request.type_attr_dir = 5435 TYPE_ATTR_DIR(TYPE_CMD, ATTR_SIMPLE, XFER_WRITE); 5436 break; 5437 case DMA_FROM_DEVICE: 5438 c->Request.type_attr_dir = 5439 TYPE_ATTR_DIR(TYPE_CMD, ATTR_SIMPLE, XFER_READ); 5440 break; 5441 case DMA_NONE: 5442 c->Request.type_attr_dir = 5443 TYPE_ATTR_DIR(TYPE_CMD, ATTR_SIMPLE, XFER_NONE); 5444 break; 5445 case DMA_BIDIRECTIONAL: 5446 /* This can happen if a buggy application does a scsi passthru 5447 * and sets both inlen and outlen to non-zero. ( see 5448 * ../scsi/scsi_ioctl.c:scsi_ioctl_send_command() ) 5449 */ 5450 5451 c->Request.type_attr_dir = 5452 TYPE_ATTR_DIR(TYPE_CMD, ATTR_SIMPLE, XFER_RSVD); 5453 /* This is technically wrong, and hpsa controllers should 5454 * reject it with CMD_INVALID, which is the most correct 5455 * response, but non-fibre backends appear to let it 5456 * slide by, and give the same results as if this field 5457 * were set correctly. Either way is acceptable for 5458 * our purposes here. 5459 */ 5460 5461 break; 5462 5463 default: 5464 dev_err(&h->pdev->dev, "unknown data direction: %d\n", 5465 cmd->sc_data_direction); 5466 BUG(); 5467 break; 5468 } 5469 5470 if (hpsa_scatter_gather(h, c, cmd) < 0) { /* Fill SG list */ 5471 hpsa_cmd_resolve_and_free(h, c); 5472 return SCSI_MLQUEUE_HOST_BUSY; 5473 } 5474 5475 if (dev->in_reset) { 5476 hpsa_cmd_resolve_and_free(h, c); 5477 return SCSI_MLQUEUE_HOST_BUSY; 5478 } 5479 5480 enqueue_cmd_and_start_io(h, c); 5481 /* the cmd'll come back via intr handler in complete_scsi_command() */ 5482 return 0; 5483 } 5484 5485 static void hpsa_cmd_init(struct ctlr_info *h, int index, 5486 struct CommandList *c) 5487 { 5488 dma_addr_t cmd_dma_handle, err_dma_handle; 5489 5490 /* Zero out all of commandlist except the last field, refcount */ 5491 memset(c, 0, offsetof(struct CommandList, refcount)); 5492 c->Header.tag = cpu_to_le64((u64) (index << DIRECT_LOOKUP_SHIFT)); 5493 cmd_dma_handle = h->cmd_pool_dhandle + index * sizeof(*c); 5494 c->err_info = h->errinfo_pool + index; 5495 memset(c->err_info, 0, sizeof(*c->err_info)); 5496 err_dma_handle = h->errinfo_pool_dhandle 5497 + index * sizeof(*c->err_info); 5498 c->cmdindex = index; 5499 c->busaddr = (u32) cmd_dma_handle; 5500 c->ErrDesc.Addr = cpu_to_le64((u64) err_dma_handle); 5501 c->ErrDesc.Len = cpu_to_le32((u32) sizeof(*c->err_info)); 5502 c->h = h; 5503 c->scsi_cmd = SCSI_CMD_IDLE; 5504 } 5505 5506 static void hpsa_preinitialize_commands(struct ctlr_info *h) 5507 { 5508 int i; 5509 5510 for (i = 0; i < h->nr_cmds; i++) { 5511 struct CommandList *c = h->cmd_pool + i; 5512 5513 hpsa_cmd_init(h, i, c); 5514 atomic_set(&c->refcount, 0); 5515 } 5516 } 5517 5518 static inline void hpsa_cmd_partial_init(struct ctlr_info *h, int index, 5519 struct CommandList *c) 5520 { 5521 dma_addr_t cmd_dma_handle = h->cmd_pool_dhandle + index * sizeof(*c); 5522 5523 BUG_ON(c->cmdindex != index); 5524 5525 memset(c->Request.CDB, 0, sizeof(c->Request.CDB)); 5526 memset(c->err_info, 0, sizeof(*c->err_info)); 5527 c->busaddr = (u32) cmd_dma_handle; 5528 } 5529 5530 static int hpsa_ioaccel_submit(struct ctlr_info *h, 5531 struct CommandList *c, struct scsi_cmnd *cmd) 5532 { 5533 struct hpsa_scsi_dev_t *dev = cmd->device->hostdata; 5534 int rc = IO_ACCEL_INELIGIBLE; 5535 5536 if (!dev) 5537 return SCSI_MLQUEUE_HOST_BUSY; 5538 5539 if (dev->in_reset) 5540 return SCSI_MLQUEUE_HOST_BUSY; 5541 5542 if (hpsa_simple_mode) 5543 return IO_ACCEL_INELIGIBLE; 5544 5545 cmd->host_scribble = (unsigned char *) c; 5546 5547 if (dev->offload_enabled) { 5548 hpsa_cmd_init(h, c->cmdindex, c); 5549 c->cmd_type = CMD_SCSI; 5550 c->scsi_cmd = cmd; 5551 rc = hpsa_scsi_ioaccel_raid_map(h, c); 5552 if (rc < 0) /* scsi_dma_map failed. */ 5553 rc = SCSI_MLQUEUE_HOST_BUSY; 5554 } else if (dev->hba_ioaccel_enabled) { 5555 hpsa_cmd_init(h, c->cmdindex, c); 5556 c->cmd_type = CMD_SCSI; 5557 c->scsi_cmd = cmd; 5558 rc = hpsa_scsi_ioaccel_direct_map(h, c); 5559 if (rc < 0) /* scsi_dma_map failed. */ 5560 rc = SCSI_MLQUEUE_HOST_BUSY; 5561 } 5562 return rc; 5563 } 5564 5565 static void hpsa_command_resubmit_worker(struct work_struct *work) 5566 { 5567 struct scsi_cmnd *cmd; 5568 struct hpsa_scsi_dev_t *dev; 5569 struct CommandList *c = container_of(work, struct CommandList, work); 5570 5571 cmd = c->scsi_cmd; 5572 dev = cmd->device->hostdata; 5573 if (!dev) { 5574 cmd->result = DID_NO_CONNECT << 16; 5575 return hpsa_cmd_free_and_done(c->h, c, cmd); 5576 } 5577 5578 if (dev->in_reset) { 5579 cmd->result = DID_RESET << 16; 5580 return hpsa_cmd_free_and_done(c->h, c, cmd); 5581 } 5582 5583 if (c->cmd_type == CMD_IOACCEL2) { 5584 struct ctlr_info *h = c->h; 5585 struct io_accel2_cmd *c2 = &h->ioaccel2_cmd_pool[c->cmdindex]; 5586 int rc; 5587 5588 if (c2->error_data.serv_response == 5589 IOACCEL2_STATUS_SR_TASK_COMP_SET_FULL) { 5590 rc = hpsa_ioaccel_submit(h, c, cmd); 5591 if (rc == 0) 5592 return; 5593 if (rc == SCSI_MLQUEUE_HOST_BUSY) { 5594 /* 5595 * If we get here, it means dma mapping failed. 5596 * Try again via scsi mid layer, which will 5597 * then get SCSI_MLQUEUE_HOST_BUSY. 5598 */ 5599 cmd->result = DID_IMM_RETRY << 16; 5600 return hpsa_cmd_free_and_done(h, c, cmd); 5601 } 5602 /* else, fall thru and resubmit down CISS path */ 5603 } 5604 } 5605 hpsa_cmd_partial_init(c->h, c->cmdindex, c); 5606 if (hpsa_ciss_submit(c->h, c, cmd, dev)) { 5607 /* 5608 * If we get here, it means dma mapping failed. Try 5609 * again via scsi mid layer, which will then get 5610 * SCSI_MLQUEUE_HOST_BUSY. 5611 * 5612 * hpsa_ciss_submit will have already freed c 5613 * if it encountered a dma mapping failure. 5614 */ 5615 cmd->result = DID_IMM_RETRY << 16; 5616 cmd->scsi_done(cmd); 5617 } 5618 } 5619 5620 /* Running in struct Scsi_Host->host_lock less mode */ 5621 static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd) 5622 { 5623 struct ctlr_info *h; 5624 struct hpsa_scsi_dev_t *dev; 5625 struct CommandList *c; 5626 int rc = 0; 5627 5628 /* Get the ptr to our adapter structure out of cmd->host. */ 5629 h = sdev_to_hba(cmd->device); 5630 5631 BUG_ON(cmd->request->tag < 0); 5632 5633 dev = cmd->device->hostdata; 5634 if (!dev) { 5635 cmd->result = DID_NO_CONNECT << 16; 5636 cmd->scsi_done(cmd); 5637 return 0; 5638 } 5639 5640 if (dev->removed) { 5641 cmd->result = DID_NO_CONNECT << 16; 5642 cmd->scsi_done(cmd); 5643 return 0; 5644 } 5645 5646 if (unlikely(lockup_detected(h))) { 5647 cmd->result = DID_NO_CONNECT << 16; 5648 cmd->scsi_done(cmd); 5649 return 0; 5650 } 5651 5652 if (dev->in_reset) 5653 return SCSI_MLQUEUE_DEVICE_BUSY; 5654 5655 c = cmd_tagged_alloc(h, cmd); 5656 if (c == NULL) 5657 return SCSI_MLQUEUE_DEVICE_BUSY; 5658 5659 /* 5660 * This is necessary because the SML doesn't zero out this field during 5661 * error recovery. 5662 */ 5663 cmd->result = 0; 5664 5665 /* 5666 * Call alternate submit routine for I/O accelerated commands. 5667 * Retries always go down the normal I/O path. 5668 */ 5669 if (likely(cmd->retries == 0 && 5670 !blk_rq_is_passthrough(cmd->request) && 5671 h->acciopath_status)) { 5672 rc = hpsa_ioaccel_submit(h, c, cmd); 5673 if (rc == 0) 5674 return 0; 5675 if (rc == SCSI_MLQUEUE_HOST_BUSY) { 5676 hpsa_cmd_resolve_and_free(h, c); 5677 return SCSI_MLQUEUE_HOST_BUSY; 5678 } 5679 } 5680 return hpsa_ciss_submit(h, c, cmd, dev); 5681 } 5682 5683 static void hpsa_scan_complete(struct ctlr_info *h) 5684 { 5685 unsigned long flags; 5686 5687 spin_lock_irqsave(&h->scan_lock, flags); 5688 h->scan_finished = 1; 5689 wake_up(&h->scan_wait_queue); 5690 spin_unlock_irqrestore(&h->scan_lock, flags); 5691 } 5692 5693 static void hpsa_scan_start(struct Scsi_Host *sh) 5694 { 5695 struct ctlr_info *h = shost_to_hba(sh); 5696 unsigned long flags; 5697 5698 /* 5699 * Don't let rescans be initiated on a controller known to be locked 5700 * up. If the controller locks up *during* a rescan, that thread is 5701 * probably hosed, but at least we can prevent new rescan threads from 5702 * piling up on a locked up controller. 5703 */ 5704 if (unlikely(lockup_detected(h))) 5705 return hpsa_scan_complete(h); 5706 5707 /* 5708 * If a scan is already waiting to run, no need to add another 5709 */ 5710 spin_lock_irqsave(&h->scan_lock, flags); 5711 if (h->scan_waiting) { 5712 spin_unlock_irqrestore(&h->scan_lock, flags); 5713 return; 5714 } 5715 5716 spin_unlock_irqrestore(&h->scan_lock, flags); 5717 5718 /* wait until any scan already in progress is finished. */ 5719 while (1) { 5720 spin_lock_irqsave(&h->scan_lock, flags); 5721 if (h->scan_finished) 5722 break; 5723 h->scan_waiting = 1; 5724 spin_unlock_irqrestore(&h->scan_lock, flags); 5725 wait_event(h->scan_wait_queue, h->scan_finished); 5726 /* Note: We don't need to worry about a race between this 5727 * thread and driver unload because the midlayer will 5728 * have incremented the reference count, so unload won't 5729 * happen if we're in here. 5730 */ 5731 } 5732 h->scan_finished = 0; /* mark scan as in progress */ 5733 h->scan_waiting = 0; 5734 spin_unlock_irqrestore(&h->scan_lock, flags); 5735 5736 if (unlikely(lockup_detected(h))) 5737 return hpsa_scan_complete(h); 5738 5739 /* 5740 * Do the scan after a reset completion 5741 */ 5742 spin_lock_irqsave(&h->reset_lock, flags); 5743 if (h->reset_in_progress) { 5744 h->drv_req_rescan = 1; 5745 spin_unlock_irqrestore(&h->reset_lock, flags); 5746 hpsa_scan_complete(h); 5747 return; 5748 } 5749 spin_unlock_irqrestore(&h->reset_lock, flags); 5750 5751 hpsa_update_scsi_devices(h); 5752 5753 hpsa_scan_complete(h); 5754 } 5755 5756 static int hpsa_change_queue_depth(struct scsi_device *sdev, int qdepth) 5757 { 5758 struct hpsa_scsi_dev_t *logical_drive = sdev->hostdata; 5759 5760 if (!logical_drive) 5761 return -ENODEV; 5762 5763 if (qdepth < 1) 5764 qdepth = 1; 5765 else if (qdepth > logical_drive->queue_depth) 5766 qdepth = logical_drive->queue_depth; 5767 5768 return scsi_change_queue_depth(sdev, qdepth); 5769 } 5770 5771 static int hpsa_scan_finished(struct Scsi_Host *sh, 5772 unsigned long elapsed_time) 5773 { 5774 struct ctlr_info *h = shost_to_hba(sh); 5775 unsigned long flags; 5776 int finished; 5777 5778 spin_lock_irqsave(&h->scan_lock, flags); 5779 finished = h->scan_finished; 5780 spin_unlock_irqrestore(&h->scan_lock, flags); 5781 return finished; 5782 } 5783 5784 static int hpsa_scsi_host_alloc(struct ctlr_info *h) 5785 { 5786 struct Scsi_Host *sh; 5787 5788 sh = scsi_host_alloc(&hpsa_driver_template, sizeof(h)); 5789 if (sh == NULL) { 5790 dev_err(&h->pdev->dev, "scsi_host_alloc failed\n"); 5791 return -ENOMEM; 5792 } 5793 5794 sh->io_port = 0; 5795 sh->n_io_port = 0; 5796 sh->this_id = -1; 5797 sh->max_channel = 3; 5798 sh->max_cmd_len = MAX_COMMAND_SIZE; 5799 sh->max_lun = HPSA_MAX_LUN; 5800 sh->max_id = HPSA_MAX_LUN; 5801 sh->can_queue = h->nr_cmds - HPSA_NRESERVED_CMDS; 5802 sh->cmd_per_lun = sh->can_queue; 5803 sh->sg_tablesize = h->maxsgentries; 5804 sh->transportt = hpsa_sas_transport_template; 5805 sh->hostdata[0] = (unsigned long) h; 5806 sh->irq = pci_irq_vector(h->pdev, 0); 5807 sh->unique_id = sh->irq; 5808 5809 h->scsi_host = sh; 5810 return 0; 5811 } 5812 5813 static int hpsa_scsi_add_host(struct ctlr_info *h) 5814 { 5815 int rv; 5816 5817 rv = scsi_add_host(h->scsi_host, &h->pdev->dev); 5818 if (rv) { 5819 dev_err(&h->pdev->dev, "scsi_add_host failed\n"); 5820 return rv; 5821 } 5822 scsi_scan_host(h->scsi_host); 5823 return 0; 5824 } 5825 5826 /* 5827 * The block layer has already gone to the trouble of picking out a unique, 5828 * small-integer tag for this request. We use an offset from that value as 5829 * an index to select our command block. (The offset allows us to reserve the 5830 * low-numbered entries for our own uses.) 5831 */ 5832 static int hpsa_get_cmd_index(struct scsi_cmnd *scmd) 5833 { 5834 int idx = scmd->request->tag; 5835 5836 if (idx < 0) 5837 return idx; 5838 5839 /* Offset to leave space for internal cmds. */ 5840 return idx += HPSA_NRESERVED_CMDS; 5841 } 5842 5843 /* 5844 * Send a TEST_UNIT_READY command to the specified LUN using the specified 5845 * reply queue; returns zero if the unit is ready, and non-zero otherwise. 5846 */ 5847 static int hpsa_send_test_unit_ready(struct ctlr_info *h, 5848 struct CommandList *c, unsigned char lunaddr[], 5849 int reply_queue) 5850 { 5851 int rc; 5852 5853 /* Send the Test Unit Ready, fill_cmd can't fail, no mapping */ 5854 (void) fill_cmd(c, TEST_UNIT_READY, h, 5855 NULL, 0, 0, lunaddr, TYPE_CMD); 5856 rc = hpsa_scsi_do_simple_cmd(h, c, reply_queue, NO_TIMEOUT); 5857 if (rc) 5858 return rc; 5859 /* no unmap needed here because no data xfer. */ 5860 5861 /* Check if the unit is already ready. */ 5862 if (c->err_info->CommandStatus == CMD_SUCCESS) 5863 return 0; 5864 5865 /* 5866 * The first command sent after reset will receive "unit attention" to 5867 * indicate that the LUN has been reset...this is actually what we're 5868 * looking for (but, success is good too). 5869 */ 5870 if (c->err_info->CommandStatus == CMD_TARGET_STATUS && 5871 c->err_info->ScsiStatus == SAM_STAT_CHECK_CONDITION && 5872 (c->err_info->SenseInfo[2] == NO_SENSE || 5873 c->err_info->SenseInfo[2] == UNIT_ATTENTION)) 5874 return 0; 5875 5876 return 1; 5877 } 5878 5879 /* 5880 * Wait for a TEST_UNIT_READY command to complete, retrying as necessary; 5881 * returns zero when the unit is ready, and non-zero when giving up. 5882 */ 5883 static int hpsa_wait_for_test_unit_ready(struct ctlr_info *h, 5884 struct CommandList *c, 5885 unsigned char lunaddr[], int reply_queue) 5886 { 5887 int rc; 5888 int count = 0; 5889 int waittime = 1; /* seconds */ 5890 5891 /* Send test unit ready until device ready, or give up. */ 5892 for (count = 0; count < HPSA_TUR_RETRY_LIMIT; count++) { 5893 5894 /* 5895 * Wait for a bit. do this first, because if we send 5896 * the TUR right away, the reset will just abort it. 5897 */ 5898 msleep(1000 * waittime); 5899 5900 rc = hpsa_send_test_unit_ready(h, c, lunaddr, reply_queue); 5901 if (!rc) 5902 break; 5903 5904 /* Increase wait time with each try, up to a point. */ 5905 if (waittime < HPSA_MAX_WAIT_INTERVAL_SECS) 5906 waittime *= 2; 5907 5908 dev_warn(&h->pdev->dev, 5909 "waiting %d secs for device to become ready.\n", 5910 waittime); 5911 } 5912 5913 return rc; 5914 } 5915 5916 static int wait_for_device_to_become_ready(struct ctlr_info *h, 5917 unsigned char lunaddr[], 5918 int reply_queue) 5919 { 5920 int first_queue; 5921 int last_queue; 5922 int rq; 5923 int rc = 0; 5924 struct CommandList *c; 5925 5926 c = cmd_alloc(h); 5927 5928 /* 5929 * If no specific reply queue was requested, then send the TUR 5930 * repeatedly, requesting a reply on each reply queue; otherwise execute 5931 * the loop exactly once using only the specified queue. 5932 */ 5933 if (reply_queue == DEFAULT_REPLY_QUEUE) { 5934 first_queue = 0; 5935 last_queue = h->nreply_queues - 1; 5936 } else { 5937 first_queue = reply_queue; 5938 last_queue = reply_queue; 5939 } 5940 5941 for (rq = first_queue; rq <= last_queue; rq++) { 5942 rc = hpsa_wait_for_test_unit_ready(h, c, lunaddr, rq); 5943 if (rc) 5944 break; 5945 } 5946 5947 if (rc) 5948 dev_warn(&h->pdev->dev, "giving up on device.\n"); 5949 else 5950 dev_warn(&h->pdev->dev, "device is ready.\n"); 5951 5952 cmd_free(h, c); 5953 return rc; 5954 } 5955 5956 /* Need at least one of these error handlers to keep ../scsi/hosts.c from 5957 * complaining. Doing a host- or bus-reset can't do anything good here. 5958 */ 5959 static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd) 5960 { 5961 int rc = SUCCESS; 5962 int i; 5963 struct ctlr_info *h; 5964 struct hpsa_scsi_dev_t *dev = NULL; 5965 u8 reset_type; 5966 char msg[48]; 5967 unsigned long flags; 5968 5969 /* find the controller to which the command to be aborted was sent */ 5970 h = sdev_to_hba(scsicmd->device); 5971 if (h == NULL) /* paranoia */ 5972 return FAILED; 5973 5974 spin_lock_irqsave(&h->reset_lock, flags); 5975 h->reset_in_progress = 1; 5976 spin_unlock_irqrestore(&h->reset_lock, flags); 5977 5978 if (lockup_detected(h)) { 5979 rc = FAILED; 5980 goto return_reset_status; 5981 } 5982 5983 dev = scsicmd->device->hostdata; 5984 if (!dev) { 5985 dev_err(&h->pdev->dev, "%s: device lookup failed\n", __func__); 5986 rc = FAILED; 5987 goto return_reset_status; 5988 } 5989 5990 if (dev->devtype == TYPE_ENCLOSURE) { 5991 rc = SUCCESS; 5992 goto return_reset_status; 5993 } 5994 5995 /* if controller locked up, we can guarantee command won't complete */ 5996 if (lockup_detected(h)) { 5997 snprintf(msg, sizeof(msg), 5998 "cmd %d RESET FAILED, lockup detected", 5999 hpsa_get_cmd_index(scsicmd)); 6000 hpsa_show_dev_msg(KERN_WARNING, h, dev, msg); 6001 rc = FAILED; 6002 goto return_reset_status; 6003 } 6004 6005 /* this reset request might be the result of a lockup; check */ 6006 if (detect_controller_lockup(h)) { 6007 snprintf(msg, sizeof(msg), 6008 "cmd %d RESET FAILED, new lockup detected", 6009 hpsa_get_cmd_index(scsicmd)); 6010 hpsa_show_dev_msg(KERN_WARNING, h, dev, msg); 6011 rc = FAILED; 6012 goto return_reset_status; 6013 } 6014 6015 /* Do not attempt on controller */ 6016 if (is_hba_lunid(dev->scsi3addr)) { 6017 rc = SUCCESS; 6018 goto return_reset_status; 6019 } 6020 6021 if (is_logical_dev_addr_mode(dev->scsi3addr)) 6022 reset_type = HPSA_DEVICE_RESET_MSG; 6023 else 6024 reset_type = HPSA_PHYS_TARGET_RESET; 6025 6026 sprintf(msg, "resetting %s", 6027 reset_type == HPSA_DEVICE_RESET_MSG ? "logical " : "physical "); 6028 hpsa_show_dev_msg(KERN_WARNING, h, dev, msg); 6029 6030 /* 6031 * wait to see if any commands will complete before sending reset 6032 */ 6033 dev->in_reset = true; /* block any new cmds from OS for this device */ 6034 for (i = 0; i < 10; i++) { 6035 if (atomic_read(&dev->commands_outstanding) > 0) 6036 msleep(1000); 6037 else 6038 break; 6039 } 6040 6041 /* send a reset to the SCSI LUN which the command was sent to */ 6042 rc = hpsa_do_reset(h, dev, reset_type, DEFAULT_REPLY_QUEUE); 6043 if (rc == 0) 6044 rc = SUCCESS; 6045 else 6046 rc = FAILED; 6047 6048 sprintf(msg, "reset %s %s", 6049 reset_type == HPSA_DEVICE_RESET_MSG ? "logical " : "physical ", 6050 rc == SUCCESS ? "completed successfully" : "failed"); 6051 hpsa_show_dev_msg(KERN_WARNING, h, dev, msg); 6052 6053 return_reset_status: 6054 spin_lock_irqsave(&h->reset_lock, flags); 6055 h->reset_in_progress = 0; 6056 if (dev) 6057 dev->in_reset = false; 6058 spin_unlock_irqrestore(&h->reset_lock, flags); 6059 return rc; 6060 } 6061 6062 /* 6063 * For operations with an associated SCSI command, a command block is allocated 6064 * at init, and managed by cmd_tagged_alloc() and cmd_tagged_free() using the 6065 * block request tag as an index into a table of entries. cmd_tagged_free() is 6066 * the complement, although cmd_free() may be called instead. 6067 */ 6068 static struct CommandList *cmd_tagged_alloc(struct ctlr_info *h, 6069 struct scsi_cmnd *scmd) 6070 { 6071 int idx = hpsa_get_cmd_index(scmd); 6072 struct CommandList *c = h->cmd_pool + idx; 6073 6074 if (idx < HPSA_NRESERVED_CMDS || idx >= h->nr_cmds) { 6075 dev_err(&h->pdev->dev, "Bad block tag: %d not in [%d..%d]\n", 6076 idx, HPSA_NRESERVED_CMDS, h->nr_cmds - 1); 6077 /* The index value comes from the block layer, so if it's out of 6078 * bounds, it's probably not our bug. 6079 */ 6080 BUG(); 6081 } 6082 6083 if (unlikely(!hpsa_is_cmd_idle(c))) { 6084 /* 6085 * We expect that the SCSI layer will hand us a unique tag 6086 * value. Thus, there should never be a collision here between 6087 * two requests...because if the selected command isn't idle 6088 * then someone is going to be very disappointed. 6089 */ 6090 if (idx != h->last_collision_tag) { /* Print once per tag */ 6091 dev_warn(&h->pdev->dev, 6092 "%s: tag collision (tag=%d)\n", __func__, idx); 6093 if (scmd) 6094 scsi_print_command(scmd); 6095 h->last_collision_tag = idx; 6096 } 6097 return NULL; 6098 } 6099 6100 atomic_inc(&c->refcount); 6101 6102 hpsa_cmd_partial_init(h, idx, c); 6103 return c; 6104 } 6105 6106 static void cmd_tagged_free(struct ctlr_info *h, struct CommandList *c) 6107 { 6108 /* 6109 * Release our reference to the block. We don't need to do anything 6110 * else to free it, because it is accessed by index. 6111 */ 6112 (void)atomic_dec(&c->refcount); 6113 } 6114 6115 /* 6116 * For operations that cannot sleep, a command block is allocated at init, 6117 * and managed by cmd_alloc() and cmd_free() using a simple bitmap to track 6118 * which ones are free or in use. Lock must be held when calling this. 6119 * cmd_free() is the complement. 6120 * This function never gives up and returns NULL. If it hangs, 6121 * another thread must call cmd_free() to free some tags. 6122 */ 6123 6124 static struct CommandList *cmd_alloc(struct ctlr_info *h) 6125 { 6126 struct CommandList *c; 6127 int refcount, i; 6128 int offset = 0; 6129 6130 /* 6131 * There is some *extremely* small but non-zero chance that that 6132 * multiple threads could get in here, and one thread could 6133 * be scanning through the list of bits looking for a free 6134 * one, but the free ones are always behind him, and other 6135 * threads sneak in behind him and eat them before he can 6136 * get to them, so that while there is always a free one, a 6137 * very unlucky thread might be starved anyway, never able to 6138 * beat the other threads. In reality, this happens so 6139 * infrequently as to be indistinguishable from never. 6140 * 6141 * Note that we start allocating commands before the SCSI host structure 6142 * is initialized. Since the search starts at bit zero, this 6143 * all works, since we have at least one command structure available; 6144 * however, it means that the structures with the low indexes have to be 6145 * reserved for driver-initiated requests, while requests from the block 6146 * layer will use the higher indexes. 6147 */ 6148 6149 for (;;) { 6150 i = find_next_zero_bit(h->cmd_pool_bits, 6151 HPSA_NRESERVED_CMDS, 6152 offset); 6153 if (unlikely(i >= HPSA_NRESERVED_CMDS)) { 6154 offset = 0; 6155 continue; 6156 } 6157 c = h->cmd_pool + i; 6158 refcount = atomic_inc_return(&c->refcount); 6159 if (unlikely(refcount > 1)) { 6160 cmd_free(h, c); /* already in use */ 6161 offset = (i + 1) % HPSA_NRESERVED_CMDS; 6162 continue; 6163 } 6164 set_bit(i & (BITS_PER_LONG - 1), 6165 h->cmd_pool_bits + (i / BITS_PER_LONG)); 6166 break; /* it's ours now. */ 6167 } 6168 hpsa_cmd_partial_init(h, i, c); 6169 c->device = NULL; 6170 return c; 6171 } 6172 6173 /* 6174 * This is the complementary operation to cmd_alloc(). Note, however, in some 6175 * corner cases it may also be used to free blocks allocated by 6176 * cmd_tagged_alloc() in which case the ref-count decrement does the trick and 6177 * the clear-bit is harmless. 6178 */ 6179 static void cmd_free(struct ctlr_info *h, struct CommandList *c) 6180 { 6181 if (atomic_dec_and_test(&c->refcount)) { 6182 int i; 6183 6184 i = c - h->cmd_pool; 6185 clear_bit(i & (BITS_PER_LONG - 1), 6186 h->cmd_pool_bits + (i / BITS_PER_LONG)); 6187 } 6188 } 6189 6190 #ifdef CONFIG_COMPAT 6191 6192 static int hpsa_ioctl32_passthru(struct scsi_device *dev, unsigned int cmd, 6193 void __user *arg) 6194 { 6195 IOCTL32_Command_struct __user *arg32 = 6196 (IOCTL32_Command_struct __user *) arg; 6197 IOCTL_Command_struct arg64; 6198 IOCTL_Command_struct __user *p = compat_alloc_user_space(sizeof(arg64)); 6199 int err; 6200 u32 cp; 6201 6202 memset(&arg64, 0, sizeof(arg64)); 6203 err = 0; 6204 err |= copy_from_user(&arg64.LUN_info, &arg32->LUN_info, 6205 sizeof(arg64.LUN_info)); 6206 err |= copy_from_user(&arg64.Request, &arg32->Request, 6207 sizeof(arg64.Request)); 6208 err |= copy_from_user(&arg64.error_info, &arg32->error_info, 6209 sizeof(arg64.error_info)); 6210 err |= get_user(arg64.buf_size, &arg32->buf_size); 6211 err |= get_user(cp, &arg32->buf); 6212 arg64.buf = compat_ptr(cp); 6213 err |= copy_to_user(p, &arg64, sizeof(arg64)); 6214 6215 if (err) 6216 return -EFAULT; 6217 6218 err = hpsa_ioctl(dev, CCISS_PASSTHRU, p); 6219 if (err) 6220 return err; 6221 err |= copy_in_user(&arg32->error_info, &p->error_info, 6222 sizeof(arg32->error_info)); 6223 if (err) 6224 return -EFAULT; 6225 return err; 6226 } 6227 6228 static int hpsa_ioctl32_big_passthru(struct scsi_device *dev, 6229 unsigned int cmd, void __user *arg) 6230 { 6231 BIG_IOCTL32_Command_struct __user *arg32 = 6232 (BIG_IOCTL32_Command_struct __user *) arg; 6233 BIG_IOCTL_Command_struct arg64; 6234 BIG_IOCTL_Command_struct __user *p = 6235 compat_alloc_user_space(sizeof(arg64)); 6236 int err; 6237 u32 cp; 6238 6239 memset(&arg64, 0, sizeof(arg64)); 6240 err = 0; 6241 err |= copy_from_user(&arg64.LUN_info, &arg32->LUN_info, 6242 sizeof(arg64.LUN_info)); 6243 err |= copy_from_user(&arg64.Request, &arg32->Request, 6244 sizeof(arg64.Request)); 6245 err |= copy_from_user(&arg64.error_info, &arg32->error_info, 6246 sizeof(arg64.error_info)); 6247 err |= get_user(arg64.buf_size, &arg32->buf_size); 6248 err |= get_user(arg64.malloc_size, &arg32->malloc_size); 6249 err |= get_user(cp, &arg32->buf); 6250 arg64.buf = compat_ptr(cp); 6251 err |= copy_to_user(p, &arg64, sizeof(arg64)); 6252 6253 if (err) 6254 return -EFAULT; 6255 6256 err = hpsa_ioctl(dev, CCISS_BIG_PASSTHRU, p); 6257 if (err) 6258 return err; 6259 err |= copy_in_user(&arg32->error_info, &p->error_info, 6260 sizeof(arg32->error_info)); 6261 if (err) 6262 return -EFAULT; 6263 return err; 6264 } 6265 6266 static int hpsa_compat_ioctl(struct scsi_device *dev, unsigned int cmd, 6267 void __user *arg) 6268 { 6269 switch (cmd) { 6270 case CCISS_GETPCIINFO: 6271 case CCISS_GETINTINFO: 6272 case CCISS_SETINTINFO: 6273 case CCISS_GETNODENAME: 6274 case CCISS_SETNODENAME: 6275 case CCISS_GETHEARTBEAT: 6276 case CCISS_GETBUSTYPES: 6277 case CCISS_GETFIRMVER: 6278 case CCISS_GETDRIVVER: 6279 case CCISS_REVALIDVOLS: 6280 case CCISS_DEREGDISK: 6281 case CCISS_REGNEWDISK: 6282 case CCISS_REGNEWD: 6283 case CCISS_RESCANDISK: 6284 case CCISS_GETLUNINFO: 6285 return hpsa_ioctl(dev, cmd, arg); 6286 6287 case CCISS_PASSTHRU32: 6288 return hpsa_ioctl32_passthru(dev, cmd, arg); 6289 case CCISS_BIG_PASSTHRU32: 6290 return hpsa_ioctl32_big_passthru(dev, cmd, arg); 6291 6292 default: 6293 return -ENOIOCTLCMD; 6294 } 6295 } 6296 #endif 6297 6298 static int hpsa_getpciinfo_ioctl(struct ctlr_info *h, void __user *argp) 6299 { 6300 struct hpsa_pci_info pciinfo; 6301 6302 if (!argp) 6303 return -EINVAL; 6304 pciinfo.domain = pci_domain_nr(h->pdev->bus); 6305 pciinfo.bus = h->pdev->bus->number; 6306 pciinfo.dev_fn = h->pdev->devfn; 6307 pciinfo.board_id = h->board_id; 6308 if (copy_to_user(argp, &pciinfo, sizeof(pciinfo))) 6309 return -EFAULT; 6310 return 0; 6311 } 6312 6313 static int hpsa_getdrivver_ioctl(struct ctlr_info *h, void __user *argp) 6314 { 6315 DriverVer_type DriverVer; 6316 unsigned char vmaj, vmin, vsubmin; 6317 int rc; 6318 6319 rc = sscanf(HPSA_DRIVER_VERSION, "%hhu.%hhu.%hhu", 6320 &vmaj, &vmin, &vsubmin); 6321 if (rc != 3) { 6322 dev_info(&h->pdev->dev, "driver version string '%s' " 6323 "unrecognized.", HPSA_DRIVER_VERSION); 6324 vmaj = 0; 6325 vmin = 0; 6326 vsubmin = 0; 6327 } 6328 DriverVer = (vmaj << 16) | (vmin << 8) | vsubmin; 6329 if (!argp) 6330 return -EINVAL; 6331 if (copy_to_user(argp, &DriverVer, sizeof(DriverVer_type))) 6332 return -EFAULT; 6333 return 0; 6334 } 6335 6336 static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp) 6337 { 6338 IOCTL_Command_struct iocommand; 6339 struct CommandList *c; 6340 char *buff = NULL; 6341 u64 temp64; 6342 int rc = 0; 6343 6344 if (!argp) 6345 return -EINVAL; 6346 if (!capable(CAP_SYS_RAWIO)) 6347 return -EPERM; 6348 if (copy_from_user(&iocommand, argp, sizeof(iocommand))) 6349 return -EFAULT; 6350 if ((iocommand.buf_size < 1) && 6351 (iocommand.Request.Type.Direction != XFER_NONE)) { 6352 return -EINVAL; 6353 } 6354 if (iocommand.buf_size > 0) { 6355 buff = kmalloc(iocommand.buf_size, GFP_KERNEL); 6356 if (buff == NULL) 6357 return -ENOMEM; 6358 if (iocommand.Request.Type.Direction & XFER_WRITE) { 6359 /* Copy the data into the buffer we created */ 6360 if (copy_from_user(buff, iocommand.buf, 6361 iocommand.buf_size)) { 6362 rc = -EFAULT; 6363 goto out_kfree; 6364 } 6365 } else { 6366 memset(buff, 0, iocommand.buf_size); 6367 } 6368 } 6369 c = cmd_alloc(h); 6370 6371 /* Fill in the command type */ 6372 c->cmd_type = CMD_IOCTL_PEND; 6373 c->scsi_cmd = SCSI_CMD_BUSY; 6374 /* Fill in Command Header */ 6375 c->Header.ReplyQueue = 0; /* unused in simple mode */ 6376 if (iocommand.buf_size > 0) { /* buffer to fill */ 6377 c->Header.SGList = 1; 6378 c->Header.SGTotal = cpu_to_le16(1); 6379 } else { /* no buffers to fill */ 6380 c->Header.SGList = 0; 6381 c->Header.SGTotal = cpu_to_le16(0); 6382 } 6383 memcpy(&c->Header.LUN, &iocommand.LUN_info, sizeof(c->Header.LUN)); 6384 6385 /* Fill in Request block */ 6386 memcpy(&c->Request, &iocommand.Request, 6387 sizeof(c->Request)); 6388 6389 /* Fill in the scatter gather information */ 6390 if (iocommand.buf_size > 0) { 6391 temp64 = dma_map_single(&h->pdev->dev, buff, 6392 iocommand.buf_size, DMA_BIDIRECTIONAL); 6393 if (dma_mapping_error(&h->pdev->dev, (dma_addr_t) temp64)) { 6394 c->SG[0].Addr = cpu_to_le64(0); 6395 c->SG[0].Len = cpu_to_le32(0); 6396 rc = -ENOMEM; 6397 goto out; 6398 } 6399 c->SG[0].Addr = cpu_to_le64(temp64); 6400 c->SG[0].Len = cpu_to_le32(iocommand.buf_size); 6401 c->SG[0].Ext = cpu_to_le32(HPSA_SG_LAST); /* not chaining */ 6402 } 6403 rc = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE, 6404 NO_TIMEOUT); 6405 if (iocommand.buf_size > 0) 6406 hpsa_pci_unmap(h->pdev, c, 1, DMA_BIDIRECTIONAL); 6407 check_ioctl_unit_attention(h, c); 6408 if (rc) { 6409 rc = -EIO; 6410 goto out; 6411 } 6412 6413 /* Copy the error information out */ 6414 memcpy(&iocommand.error_info, c->err_info, 6415 sizeof(iocommand.error_info)); 6416 if (copy_to_user(argp, &iocommand, sizeof(iocommand))) { 6417 rc = -EFAULT; 6418 goto out; 6419 } 6420 if ((iocommand.Request.Type.Direction & XFER_READ) && 6421 iocommand.buf_size > 0) { 6422 /* Copy the data out of the buffer we created */ 6423 if (copy_to_user(iocommand.buf, buff, iocommand.buf_size)) { 6424 rc = -EFAULT; 6425 goto out; 6426 } 6427 } 6428 out: 6429 cmd_free(h, c); 6430 out_kfree: 6431 kfree(buff); 6432 return rc; 6433 } 6434 6435 static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp) 6436 { 6437 BIG_IOCTL_Command_struct *ioc; 6438 struct CommandList *c; 6439 unsigned char **buff = NULL; 6440 int *buff_size = NULL; 6441 u64 temp64; 6442 BYTE sg_used = 0; 6443 int status = 0; 6444 u32 left; 6445 u32 sz; 6446 BYTE __user *data_ptr; 6447 6448 if (!argp) 6449 return -EINVAL; 6450 if (!capable(CAP_SYS_RAWIO)) 6451 return -EPERM; 6452 ioc = vmemdup_user(argp, sizeof(*ioc)); 6453 if (IS_ERR(ioc)) { 6454 status = PTR_ERR(ioc); 6455 goto cleanup1; 6456 } 6457 if ((ioc->buf_size < 1) && 6458 (ioc->Request.Type.Direction != XFER_NONE)) { 6459 status = -EINVAL; 6460 goto cleanup1; 6461 } 6462 /* Check kmalloc limits using all SGs */ 6463 if (ioc->malloc_size > MAX_KMALLOC_SIZE) { 6464 status = -EINVAL; 6465 goto cleanup1; 6466 } 6467 if (ioc->buf_size > ioc->malloc_size * SG_ENTRIES_IN_CMD) { 6468 status = -EINVAL; 6469 goto cleanup1; 6470 } 6471 buff = kcalloc(SG_ENTRIES_IN_CMD, sizeof(char *), GFP_KERNEL); 6472 if (!buff) { 6473 status = -ENOMEM; 6474 goto cleanup1; 6475 } 6476 buff_size = kmalloc_array(SG_ENTRIES_IN_CMD, sizeof(int), GFP_KERNEL); 6477 if (!buff_size) { 6478 status = -ENOMEM; 6479 goto cleanup1; 6480 } 6481 left = ioc->buf_size; 6482 data_ptr = ioc->buf; 6483 while (left) { 6484 sz = (left > ioc->malloc_size) ? ioc->malloc_size : left; 6485 buff_size[sg_used] = sz; 6486 buff[sg_used] = kmalloc(sz, GFP_KERNEL); 6487 if (buff[sg_used] == NULL) { 6488 status = -ENOMEM; 6489 goto cleanup1; 6490 } 6491 if (ioc->Request.Type.Direction & XFER_WRITE) { 6492 if (copy_from_user(buff[sg_used], data_ptr, sz)) { 6493 status = -EFAULT; 6494 goto cleanup1; 6495 } 6496 } else 6497 memset(buff[sg_used], 0, sz); 6498 left -= sz; 6499 data_ptr += sz; 6500 sg_used++; 6501 } 6502 c = cmd_alloc(h); 6503 6504 c->cmd_type = CMD_IOCTL_PEND; 6505 c->scsi_cmd = SCSI_CMD_BUSY; 6506 c->Header.ReplyQueue = 0; 6507 c->Header.SGList = (u8) sg_used; 6508 c->Header.SGTotal = cpu_to_le16(sg_used); 6509 memcpy(&c->Header.LUN, &ioc->LUN_info, sizeof(c->Header.LUN)); 6510 memcpy(&c->Request, &ioc->Request, sizeof(c->Request)); 6511 if (ioc->buf_size > 0) { 6512 int i; 6513 for (i = 0; i < sg_used; i++) { 6514 temp64 = dma_map_single(&h->pdev->dev, buff[i], 6515 buff_size[i], DMA_BIDIRECTIONAL); 6516 if (dma_mapping_error(&h->pdev->dev, 6517 (dma_addr_t) temp64)) { 6518 c->SG[i].Addr = cpu_to_le64(0); 6519 c->SG[i].Len = cpu_to_le32(0); 6520 hpsa_pci_unmap(h->pdev, c, i, 6521 DMA_BIDIRECTIONAL); 6522 status = -ENOMEM; 6523 goto cleanup0; 6524 } 6525 c->SG[i].Addr = cpu_to_le64(temp64); 6526 c->SG[i].Len = cpu_to_le32(buff_size[i]); 6527 c->SG[i].Ext = cpu_to_le32(0); 6528 } 6529 c->SG[--i].Ext = cpu_to_le32(HPSA_SG_LAST); 6530 } 6531 status = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE, 6532 NO_TIMEOUT); 6533 if (sg_used) 6534 hpsa_pci_unmap(h->pdev, c, sg_used, DMA_BIDIRECTIONAL); 6535 check_ioctl_unit_attention(h, c); 6536 if (status) { 6537 status = -EIO; 6538 goto cleanup0; 6539 } 6540 6541 /* Copy the error information out */ 6542 memcpy(&ioc->error_info, c->err_info, sizeof(ioc->error_info)); 6543 if (copy_to_user(argp, ioc, sizeof(*ioc))) { 6544 status = -EFAULT; 6545 goto cleanup0; 6546 } 6547 if ((ioc->Request.Type.Direction & XFER_READ) && ioc->buf_size > 0) { 6548 int i; 6549 6550 /* Copy the data out of the buffer we created */ 6551 BYTE __user *ptr = ioc->buf; 6552 for (i = 0; i < sg_used; i++) { 6553 if (copy_to_user(ptr, buff[i], buff_size[i])) { 6554 status = -EFAULT; 6555 goto cleanup0; 6556 } 6557 ptr += buff_size[i]; 6558 } 6559 } 6560 status = 0; 6561 cleanup0: 6562 cmd_free(h, c); 6563 cleanup1: 6564 if (buff) { 6565 int i; 6566 6567 for (i = 0; i < sg_used; i++) 6568 kfree(buff[i]); 6569 kfree(buff); 6570 } 6571 kfree(buff_size); 6572 kvfree(ioc); 6573 return status; 6574 } 6575 6576 static void check_ioctl_unit_attention(struct ctlr_info *h, 6577 struct CommandList *c) 6578 { 6579 if (c->err_info->CommandStatus == CMD_TARGET_STATUS && 6580 c->err_info->ScsiStatus != SAM_STAT_CHECK_CONDITION) 6581 (void) check_for_unit_attention(h, c); 6582 } 6583 6584 /* 6585 * ioctl 6586 */ 6587 static int hpsa_ioctl(struct scsi_device *dev, unsigned int cmd, 6588 void __user *arg) 6589 { 6590 struct ctlr_info *h; 6591 void __user *argp = (void __user *)arg; 6592 int rc; 6593 6594 h = sdev_to_hba(dev); 6595 6596 switch (cmd) { 6597 case CCISS_DEREGDISK: 6598 case CCISS_REGNEWDISK: 6599 case CCISS_REGNEWD: 6600 hpsa_scan_start(h->scsi_host); 6601 return 0; 6602 case CCISS_GETPCIINFO: 6603 return hpsa_getpciinfo_ioctl(h, argp); 6604 case CCISS_GETDRIVVER: 6605 return hpsa_getdrivver_ioctl(h, argp); 6606 case CCISS_PASSTHRU: 6607 if (atomic_dec_if_positive(&h->passthru_cmds_avail) < 0) 6608 return -EAGAIN; 6609 rc = hpsa_passthru_ioctl(h, argp); 6610 atomic_inc(&h->passthru_cmds_avail); 6611 return rc; 6612 case CCISS_BIG_PASSTHRU: 6613 if (atomic_dec_if_positive(&h->passthru_cmds_avail) < 0) 6614 return -EAGAIN; 6615 rc = hpsa_big_passthru_ioctl(h, argp); 6616 atomic_inc(&h->passthru_cmds_avail); 6617 return rc; 6618 default: 6619 return -ENOTTY; 6620 } 6621 } 6622 6623 static void hpsa_send_host_reset(struct ctlr_info *h, u8 reset_type) 6624 { 6625 struct CommandList *c; 6626 6627 c = cmd_alloc(h); 6628 6629 /* fill_cmd can't fail here, no data buffer to map */ 6630 (void) fill_cmd(c, HPSA_DEVICE_RESET_MSG, h, NULL, 0, 0, 6631 RAID_CTLR_LUNID, TYPE_MSG); 6632 c->Request.CDB[1] = reset_type; /* fill_cmd defaults to target reset */ 6633 c->waiting = NULL; 6634 enqueue_cmd_and_start_io(h, c); 6635 /* Don't wait for completion, the reset won't complete. Don't free 6636 * the command either. This is the last command we will send before 6637 * re-initializing everything, so it doesn't matter and won't leak. 6638 */ 6639 return; 6640 } 6641 6642 static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h, 6643 void *buff, size_t size, u16 page_code, unsigned char *scsi3addr, 6644 int cmd_type) 6645 { 6646 enum dma_data_direction dir = DMA_NONE; 6647 6648 c->cmd_type = CMD_IOCTL_PEND; 6649 c->scsi_cmd = SCSI_CMD_BUSY; 6650 c->Header.ReplyQueue = 0; 6651 if (buff != NULL && size > 0) { 6652 c->Header.SGList = 1; 6653 c->Header.SGTotal = cpu_to_le16(1); 6654 } else { 6655 c->Header.SGList = 0; 6656 c->Header.SGTotal = cpu_to_le16(0); 6657 } 6658 memcpy(c->Header.LUN.LunAddrBytes, scsi3addr, 8); 6659 6660 if (cmd_type == TYPE_CMD) { 6661 switch (cmd) { 6662 case HPSA_INQUIRY: 6663 /* are we trying to read a vital product page */ 6664 if (page_code & VPD_PAGE) { 6665 c->Request.CDB[1] = 0x01; 6666 c->Request.CDB[2] = (page_code & 0xff); 6667 } 6668 c->Request.CDBLen = 6; 6669 c->Request.type_attr_dir = 6670 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ); 6671 c->Request.Timeout = 0; 6672 c->Request.CDB[0] = HPSA_INQUIRY; 6673 c->Request.CDB[4] = size & 0xFF; 6674 break; 6675 case RECEIVE_DIAGNOSTIC: 6676 c->Request.CDBLen = 6; 6677 c->Request.type_attr_dir = 6678 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ); 6679 c->Request.Timeout = 0; 6680 c->Request.CDB[0] = cmd; 6681 c->Request.CDB[1] = 1; 6682 c->Request.CDB[2] = 1; 6683 c->Request.CDB[3] = (size >> 8) & 0xFF; 6684 c->Request.CDB[4] = size & 0xFF; 6685 break; 6686 case HPSA_REPORT_LOG: 6687 case HPSA_REPORT_PHYS: 6688 /* Talking to controller so It's a physical command 6689 mode = 00 target = 0. Nothing to write. 6690 */ 6691 c->Request.CDBLen = 12; 6692 c->Request.type_attr_dir = 6693 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ); 6694 c->Request.Timeout = 0; 6695 c->Request.CDB[0] = cmd; 6696 c->Request.CDB[6] = (size >> 24) & 0xFF; /* MSB */ 6697 c->Request.CDB[7] = (size >> 16) & 0xFF; 6698 c->Request.CDB[8] = (size >> 8) & 0xFF; 6699 c->Request.CDB[9] = size & 0xFF; 6700 break; 6701 case BMIC_SENSE_DIAG_OPTIONS: 6702 c->Request.CDBLen = 16; 6703 c->Request.type_attr_dir = 6704 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ); 6705 c->Request.Timeout = 0; 6706 /* Spec says this should be BMIC_WRITE */ 6707 c->Request.CDB[0] = BMIC_READ; 6708 c->Request.CDB[6] = BMIC_SENSE_DIAG_OPTIONS; 6709 break; 6710 case BMIC_SET_DIAG_OPTIONS: 6711 c->Request.CDBLen = 16; 6712 c->Request.type_attr_dir = 6713 TYPE_ATTR_DIR(cmd_type, 6714 ATTR_SIMPLE, XFER_WRITE); 6715 c->Request.Timeout = 0; 6716 c->Request.CDB[0] = BMIC_WRITE; 6717 c->Request.CDB[6] = BMIC_SET_DIAG_OPTIONS; 6718 break; 6719 case HPSA_CACHE_FLUSH: 6720 c->Request.CDBLen = 12; 6721 c->Request.type_attr_dir = 6722 TYPE_ATTR_DIR(cmd_type, 6723 ATTR_SIMPLE, XFER_WRITE); 6724 c->Request.Timeout = 0; 6725 c->Request.CDB[0] = BMIC_WRITE; 6726 c->Request.CDB[6] = BMIC_CACHE_FLUSH; 6727 c->Request.CDB[7] = (size >> 8) & 0xFF; 6728 c->Request.CDB[8] = size & 0xFF; 6729 break; 6730 case TEST_UNIT_READY: 6731 c->Request.CDBLen = 6; 6732 c->Request.type_attr_dir = 6733 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_NONE); 6734 c->Request.Timeout = 0; 6735 break; 6736 case HPSA_GET_RAID_MAP: 6737 c->Request.CDBLen = 12; 6738 c->Request.type_attr_dir = 6739 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ); 6740 c->Request.Timeout = 0; 6741 c->Request.CDB[0] = HPSA_CISS_READ; 6742 c->Request.CDB[1] = cmd; 6743 c->Request.CDB[6] = (size >> 24) & 0xFF; /* MSB */ 6744 c->Request.CDB[7] = (size >> 16) & 0xFF; 6745 c->Request.CDB[8] = (size >> 8) & 0xFF; 6746 c->Request.CDB[9] = size & 0xFF; 6747 break; 6748 case BMIC_SENSE_CONTROLLER_PARAMETERS: 6749 c->Request.CDBLen = 10; 6750 c->Request.type_attr_dir = 6751 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ); 6752 c->Request.Timeout = 0; 6753 c->Request.CDB[0] = BMIC_READ; 6754 c->Request.CDB[6] = BMIC_SENSE_CONTROLLER_PARAMETERS; 6755 c->Request.CDB[7] = (size >> 16) & 0xFF; 6756 c->Request.CDB[8] = (size >> 8) & 0xFF; 6757 break; 6758 case BMIC_IDENTIFY_PHYSICAL_DEVICE: 6759 c->Request.CDBLen = 10; 6760 c->Request.type_attr_dir = 6761 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ); 6762 c->Request.Timeout = 0; 6763 c->Request.CDB[0] = BMIC_READ; 6764 c->Request.CDB[6] = BMIC_IDENTIFY_PHYSICAL_DEVICE; 6765 c->Request.CDB[7] = (size >> 16) & 0xFF; 6766 c->Request.CDB[8] = (size >> 8) & 0XFF; 6767 break; 6768 case BMIC_SENSE_SUBSYSTEM_INFORMATION: 6769 c->Request.CDBLen = 10; 6770 c->Request.type_attr_dir = 6771 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ); 6772 c->Request.Timeout = 0; 6773 c->Request.CDB[0] = BMIC_READ; 6774 c->Request.CDB[6] = BMIC_SENSE_SUBSYSTEM_INFORMATION; 6775 c->Request.CDB[7] = (size >> 16) & 0xFF; 6776 c->Request.CDB[8] = (size >> 8) & 0XFF; 6777 break; 6778 case BMIC_SENSE_STORAGE_BOX_PARAMS: 6779 c->Request.CDBLen = 10; 6780 c->Request.type_attr_dir = 6781 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ); 6782 c->Request.Timeout = 0; 6783 c->Request.CDB[0] = BMIC_READ; 6784 c->Request.CDB[6] = BMIC_SENSE_STORAGE_BOX_PARAMS; 6785 c->Request.CDB[7] = (size >> 16) & 0xFF; 6786 c->Request.CDB[8] = (size >> 8) & 0XFF; 6787 break; 6788 case BMIC_IDENTIFY_CONTROLLER: 6789 c->Request.CDBLen = 10; 6790 c->Request.type_attr_dir = 6791 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ); 6792 c->Request.Timeout = 0; 6793 c->Request.CDB[0] = BMIC_READ; 6794 c->Request.CDB[1] = 0; 6795 c->Request.CDB[2] = 0; 6796 c->Request.CDB[3] = 0; 6797 c->Request.CDB[4] = 0; 6798 c->Request.CDB[5] = 0; 6799 c->Request.CDB[6] = BMIC_IDENTIFY_CONTROLLER; 6800 c->Request.CDB[7] = (size >> 16) & 0xFF; 6801 c->Request.CDB[8] = (size >> 8) & 0XFF; 6802 c->Request.CDB[9] = 0; 6803 break; 6804 default: 6805 dev_warn(&h->pdev->dev, "unknown command 0x%c\n", cmd); 6806 BUG(); 6807 } 6808 } else if (cmd_type == TYPE_MSG) { 6809 switch (cmd) { 6810 6811 case HPSA_PHYS_TARGET_RESET: 6812 c->Request.CDBLen = 16; 6813 c->Request.type_attr_dir = 6814 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_NONE); 6815 c->Request.Timeout = 0; /* Don't time out */ 6816 memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB)); 6817 c->Request.CDB[0] = HPSA_RESET; 6818 c->Request.CDB[1] = HPSA_TARGET_RESET_TYPE; 6819 /* Physical target reset needs no control bytes 4-7*/ 6820 c->Request.CDB[4] = 0x00; 6821 c->Request.CDB[5] = 0x00; 6822 c->Request.CDB[6] = 0x00; 6823 c->Request.CDB[7] = 0x00; 6824 break; 6825 case HPSA_DEVICE_RESET_MSG: 6826 c->Request.CDBLen = 16; 6827 c->Request.type_attr_dir = 6828 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_NONE); 6829 c->Request.Timeout = 0; /* Don't time out */ 6830 memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB)); 6831 c->Request.CDB[0] = cmd; 6832 c->Request.CDB[1] = HPSA_RESET_TYPE_LUN; 6833 /* If bytes 4-7 are zero, it means reset the */ 6834 /* LunID device */ 6835 c->Request.CDB[4] = 0x00; 6836 c->Request.CDB[5] = 0x00; 6837 c->Request.CDB[6] = 0x00; 6838 c->Request.CDB[7] = 0x00; 6839 break; 6840 default: 6841 dev_warn(&h->pdev->dev, "unknown message type %d\n", 6842 cmd); 6843 BUG(); 6844 } 6845 } else { 6846 dev_warn(&h->pdev->dev, "unknown command type %d\n", cmd_type); 6847 BUG(); 6848 } 6849 6850 switch (GET_DIR(c->Request.type_attr_dir)) { 6851 case XFER_READ: 6852 dir = DMA_FROM_DEVICE; 6853 break; 6854 case XFER_WRITE: 6855 dir = DMA_TO_DEVICE; 6856 break; 6857 case XFER_NONE: 6858 dir = DMA_NONE; 6859 break; 6860 default: 6861 dir = DMA_BIDIRECTIONAL; 6862 } 6863 if (hpsa_map_one(h->pdev, c, buff, size, dir)) 6864 return -1; 6865 return 0; 6866 } 6867 6868 /* 6869 * Map (physical) PCI mem into (virtual) kernel space 6870 */ 6871 static void __iomem *remap_pci_mem(ulong base, ulong size) 6872 { 6873 ulong page_base = ((ulong) base) & PAGE_MASK; 6874 ulong page_offs = ((ulong) base) - page_base; 6875 void __iomem *page_remapped = ioremap_nocache(page_base, 6876 page_offs + size); 6877 6878 return page_remapped ? (page_remapped + page_offs) : NULL; 6879 } 6880 6881 static inline unsigned long get_next_completion(struct ctlr_info *h, u8 q) 6882 { 6883 return h->access.command_completed(h, q); 6884 } 6885 6886 static inline bool interrupt_pending(struct ctlr_info *h) 6887 { 6888 return h->access.intr_pending(h); 6889 } 6890 6891 static inline long interrupt_not_for_us(struct ctlr_info *h) 6892 { 6893 return (h->access.intr_pending(h) == 0) || 6894 (h->interrupts_enabled == 0); 6895 } 6896 6897 static inline int bad_tag(struct ctlr_info *h, u32 tag_index, 6898 u32 raw_tag) 6899 { 6900 if (unlikely(tag_index >= h->nr_cmds)) { 6901 dev_warn(&h->pdev->dev, "bad tag 0x%08x ignored.\n", raw_tag); 6902 return 1; 6903 } 6904 return 0; 6905 } 6906 6907 static inline void finish_cmd(struct CommandList *c) 6908 { 6909 dial_up_lockup_detection_on_fw_flash_complete(c->h, c); 6910 if (likely(c->cmd_type == CMD_IOACCEL1 || c->cmd_type == CMD_SCSI 6911 || c->cmd_type == CMD_IOACCEL2)) 6912 complete_scsi_command(c); 6913 else if (c->cmd_type == CMD_IOCTL_PEND || c->cmd_type == IOACCEL2_TMF) 6914 complete(c->waiting); 6915 } 6916 6917 /* process completion of an indexed ("direct lookup") command */ 6918 static inline void process_indexed_cmd(struct ctlr_info *h, 6919 u32 raw_tag) 6920 { 6921 u32 tag_index; 6922 struct CommandList *c; 6923 6924 tag_index = raw_tag >> DIRECT_LOOKUP_SHIFT; 6925 if (!bad_tag(h, tag_index, raw_tag)) { 6926 c = h->cmd_pool + tag_index; 6927 finish_cmd(c); 6928 } 6929 } 6930 6931 /* Some controllers, like p400, will give us one interrupt 6932 * after a soft reset, even if we turned interrupts off. 6933 * Only need to check for this in the hpsa_xxx_discard_completions 6934 * functions. 6935 */ 6936 static int ignore_bogus_interrupt(struct ctlr_info *h) 6937 { 6938 if (likely(!reset_devices)) 6939 return 0; 6940 6941 if (likely(h->interrupts_enabled)) 6942 return 0; 6943 6944 dev_info(&h->pdev->dev, "Received interrupt while interrupts disabled " 6945 "(known firmware bug.) Ignoring.\n"); 6946 6947 return 1; 6948 } 6949 6950 /* 6951 * Convert &h->q[x] (passed to interrupt handlers) back to h. 6952 * Relies on (h-q[x] == x) being true for x such that 6953 * 0 <= x < MAX_REPLY_QUEUES. 6954 */ 6955 static struct ctlr_info *queue_to_hba(u8 *queue) 6956 { 6957 return container_of((queue - *queue), struct ctlr_info, q[0]); 6958 } 6959 6960 static irqreturn_t hpsa_intx_discard_completions(int irq, void *queue) 6961 { 6962 struct ctlr_info *h = queue_to_hba(queue); 6963 u8 q = *(u8 *) queue; 6964 u32 raw_tag; 6965 6966 if (ignore_bogus_interrupt(h)) 6967 return IRQ_NONE; 6968 6969 if (interrupt_not_for_us(h)) 6970 return IRQ_NONE; 6971 h->last_intr_timestamp = get_jiffies_64(); 6972 while (interrupt_pending(h)) { 6973 raw_tag = get_next_completion(h, q); 6974 while (raw_tag != FIFO_EMPTY) 6975 raw_tag = next_command(h, q); 6976 } 6977 return IRQ_HANDLED; 6978 } 6979 6980 static irqreturn_t hpsa_msix_discard_completions(int irq, void *queue) 6981 { 6982 struct ctlr_info *h = queue_to_hba(queue); 6983 u32 raw_tag; 6984 u8 q = *(u8 *) queue; 6985 6986 if (ignore_bogus_interrupt(h)) 6987 return IRQ_NONE; 6988 6989 h->last_intr_timestamp = get_jiffies_64(); 6990 raw_tag = get_next_completion(h, q); 6991 while (raw_tag != FIFO_EMPTY) 6992 raw_tag = next_command(h, q); 6993 return IRQ_HANDLED; 6994 } 6995 6996 static irqreturn_t do_hpsa_intr_intx(int irq, void *queue) 6997 { 6998 struct ctlr_info *h = queue_to_hba((u8 *) queue); 6999 u32 raw_tag; 7000 u8 q = *(u8 *) queue; 7001 7002 if (interrupt_not_for_us(h)) 7003 return IRQ_NONE; 7004 h->last_intr_timestamp = get_jiffies_64(); 7005 while (interrupt_pending(h)) { 7006 raw_tag = get_next_completion(h, q); 7007 while (raw_tag != FIFO_EMPTY) { 7008 process_indexed_cmd(h, raw_tag); 7009 raw_tag = next_command(h, q); 7010 } 7011 } 7012 return IRQ_HANDLED; 7013 } 7014 7015 static irqreturn_t do_hpsa_intr_msi(int irq, void *queue) 7016 { 7017 struct ctlr_info *h = queue_to_hba(queue); 7018 u32 raw_tag; 7019 u8 q = *(u8 *) queue; 7020 7021 h->last_intr_timestamp = get_jiffies_64(); 7022 raw_tag = get_next_completion(h, q); 7023 while (raw_tag != FIFO_EMPTY) { 7024 process_indexed_cmd(h, raw_tag); 7025 raw_tag = next_command(h, q); 7026 } 7027 return IRQ_HANDLED; 7028 } 7029 7030 /* Send a message CDB to the firmware. Careful, this only works 7031 * in simple mode, not performant mode due to the tag lookup. 7032 * We only ever use this immediately after a controller reset. 7033 */ 7034 static int hpsa_message(struct pci_dev *pdev, unsigned char opcode, 7035 unsigned char type) 7036 { 7037 struct Command { 7038 struct CommandListHeader CommandHeader; 7039 struct RequestBlock Request; 7040 struct ErrDescriptor ErrorDescriptor; 7041 }; 7042 struct Command *cmd; 7043 static const size_t cmd_sz = sizeof(*cmd) + 7044 sizeof(cmd->ErrorDescriptor); 7045 dma_addr_t paddr64; 7046 __le32 paddr32; 7047 u32 tag; 7048 void __iomem *vaddr; 7049 int i, err; 7050 7051 vaddr = pci_ioremap_bar(pdev, 0); 7052 if (vaddr == NULL) 7053 return -ENOMEM; 7054 7055 /* The Inbound Post Queue only accepts 32-bit physical addresses for the 7056 * CCISS commands, so they must be allocated from the lower 4GiB of 7057 * memory. 7058 */ 7059 err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); 7060 if (err) { 7061 iounmap(vaddr); 7062 return err; 7063 } 7064 7065 cmd = dma_alloc_coherent(&pdev->dev, cmd_sz, &paddr64, GFP_KERNEL); 7066 if (cmd == NULL) { 7067 iounmap(vaddr); 7068 return -ENOMEM; 7069 } 7070 7071 /* This must fit, because of the 32-bit consistent DMA mask. Also, 7072 * although there's no guarantee, we assume that the address is at 7073 * least 4-byte aligned (most likely, it's page-aligned). 7074 */ 7075 paddr32 = cpu_to_le32(paddr64); 7076 7077 cmd->CommandHeader.ReplyQueue = 0; 7078 cmd->CommandHeader.SGList = 0; 7079 cmd->CommandHeader.SGTotal = cpu_to_le16(0); 7080 cmd->CommandHeader.tag = cpu_to_le64(paddr64); 7081 memset(&cmd->CommandHeader.LUN.LunAddrBytes, 0, 8); 7082 7083 cmd->Request.CDBLen = 16; 7084 cmd->Request.type_attr_dir = 7085 TYPE_ATTR_DIR(TYPE_MSG, ATTR_HEADOFQUEUE, XFER_NONE); 7086 cmd->Request.Timeout = 0; /* Don't time out */ 7087 cmd->Request.CDB[0] = opcode; 7088 cmd->Request.CDB[1] = type; 7089 memset(&cmd->Request.CDB[2], 0, 14); /* rest of the CDB is reserved */ 7090 cmd->ErrorDescriptor.Addr = 7091 cpu_to_le64((le32_to_cpu(paddr32) + sizeof(*cmd))); 7092 cmd->ErrorDescriptor.Len = cpu_to_le32(sizeof(struct ErrorInfo)); 7093 7094 writel(le32_to_cpu(paddr32), vaddr + SA5_REQUEST_PORT_OFFSET); 7095 7096 for (i = 0; i < HPSA_MSG_SEND_RETRY_LIMIT; i++) { 7097 tag = readl(vaddr + SA5_REPLY_PORT_OFFSET); 7098 if ((tag & ~HPSA_SIMPLE_ERROR_BITS) == paddr64) 7099 break; 7100 msleep(HPSA_MSG_SEND_RETRY_INTERVAL_MSECS); 7101 } 7102 7103 iounmap(vaddr); 7104 7105 /* we leak the DMA buffer here ... no choice since the controller could 7106 * still complete the command. 7107 */ 7108 if (i == HPSA_MSG_SEND_RETRY_LIMIT) { 7109 dev_err(&pdev->dev, "controller message %02x:%02x timed out\n", 7110 opcode, type); 7111 return -ETIMEDOUT; 7112 } 7113 7114 dma_free_coherent(&pdev->dev, cmd_sz, cmd, paddr64); 7115 7116 if (tag & HPSA_ERROR_BIT) { 7117 dev_err(&pdev->dev, "controller message %02x:%02x failed\n", 7118 opcode, type); 7119 return -EIO; 7120 } 7121 7122 dev_info(&pdev->dev, "controller message %02x:%02x succeeded\n", 7123 opcode, type); 7124 return 0; 7125 } 7126 7127 #define hpsa_noop(p) hpsa_message(p, 3, 0) 7128 7129 static int hpsa_controller_hard_reset(struct pci_dev *pdev, 7130 void __iomem *vaddr, u32 use_doorbell) 7131 { 7132 7133 if (use_doorbell) { 7134 /* For everything after the P600, the PCI power state method 7135 * of resetting the controller doesn't work, so we have this 7136 * other way using the doorbell register. 7137 */ 7138 dev_info(&pdev->dev, "using doorbell to reset controller\n"); 7139 writel(use_doorbell, vaddr + SA5_DOORBELL); 7140 7141 /* PMC hardware guys tell us we need a 10 second delay after 7142 * doorbell reset and before any attempt to talk to the board 7143 * at all to ensure that this actually works and doesn't fall 7144 * over in some weird corner cases. 7145 */ 7146 msleep(10000); 7147 } else { /* Try to do it the PCI power state way */ 7148 7149 /* Quoting from the Open CISS Specification: "The Power 7150 * Management Control/Status Register (CSR) controls the power 7151 * state of the device. The normal operating state is D0, 7152 * CSR=00h. The software off state is D3, CSR=03h. To reset 7153 * the controller, place the interface device in D3 then to D0, 7154 * this causes a secondary PCI reset which will reset the 7155 * controller." */ 7156 7157 int rc = 0; 7158 7159 dev_info(&pdev->dev, "using PCI PM to reset controller\n"); 7160 7161 /* enter the D3hot power management state */ 7162 rc = pci_set_power_state(pdev, PCI_D3hot); 7163 if (rc) 7164 return rc; 7165 7166 msleep(500); 7167 7168 /* enter the D0 power management state */ 7169 rc = pci_set_power_state(pdev, PCI_D0); 7170 if (rc) 7171 return rc; 7172 7173 /* 7174 * The P600 requires a small delay when changing states. 7175 * Otherwise we may think the board did not reset and we bail. 7176 * This for kdump only and is particular to the P600. 7177 */ 7178 msleep(500); 7179 } 7180 return 0; 7181 } 7182 7183 static void init_driver_version(char *driver_version, int len) 7184 { 7185 memset(driver_version, 0, len); 7186 strncpy(driver_version, HPSA " " HPSA_DRIVER_VERSION, len - 1); 7187 } 7188 7189 static int write_driver_ver_to_cfgtable(struct CfgTable __iomem *cfgtable) 7190 { 7191 char *driver_version; 7192 int i, size = sizeof(cfgtable->driver_version); 7193 7194 driver_version = kmalloc(size, GFP_KERNEL); 7195 if (!driver_version) 7196 return -ENOMEM; 7197 7198 init_driver_version(driver_version, size); 7199 for (i = 0; i < size; i++) 7200 writeb(driver_version[i], &cfgtable->driver_version[i]); 7201 kfree(driver_version); 7202 return 0; 7203 } 7204 7205 static void read_driver_ver_from_cfgtable(struct CfgTable __iomem *cfgtable, 7206 unsigned char *driver_ver) 7207 { 7208 int i; 7209 7210 for (i = 0; i < sizeof(cfgtable->driver_version); i++) 7211 driver_ver[i] = readb(&cfgtable->driver_version[i]); 7212 } 7213 7214 static int controller_reset_failed(struct CfgTable __iomem *cfgtable) 7215 { 7216 7217 char *driver_ver, *old_driver_ver; 7218 int rc, size = sizeof(cfgtable->driver_version); 7219 7220 old_driver_ver = kmalloc_array(2, size, GFP_KERNEL); 7221 if (!old_driver_ver) 7222 return -ENOMEM; 7223 driver_ver = old_driver_ver + size; 7224 7225 /* After a reset, the 32 bytes of "driver version" in the cfgtable 7226 * should have been changed, otherwise we know the reset failed. 7227 */ 7228 init_driver_version(old_driver_ver, size); 7229 read_driver_ver_from_cfgtable(cfgtable, driver_ver); 7230 rc = !memcmp(driver_ver, old_driver_ver, size); 7231 kfree(old_driver_ver); 7232 return rc; 7233 } 7234 /* This does a hard reset of the controller using PCI power management 7235 * states or the using the doorbell register. 7236 */ 7237 static int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev, u32 board_id) 7238 { 7239 u64 cfg_offset; 7240 u32 cfg_base_addr; 7241 u64 cfg_base_addr_index; 7242 void __iomem *vaddr; 7243 unsigned long paddr; 7244 u32 misc_fw_support; 7245 int rc; 7246 struct CfgTable __iomem *cfgtable; 7247 u32 use_doorbell; 7248 u16 command_register; 7249 7250 /* For controllers as old as the P600, this is very nearly 7251 * the same thing as 7252 * 7253 * pci_save_state(pci_dev); 7254 * pci_set_power_state(pci_dev, PCI_D3hot); 7255 * pci_set_power_state(pci_dev, PCI_D0); 7256 * pci_restore_state(pci_dev); 7257 * 7258 * For controllers newer than the P600, the pci power state 7259 * method of resetting doesn't work so we have another way 7260 * using the doorbell register. 7261 */ 7262 7263 if (!ctlr_is_resettable(board_id)) { 7264 dev_warn(&pdev->dev, "Controller not resettable\n"); 7265 return -ENODEV; 7266 } 7267 7268 /* if controller is soft- but not hard resettable... */ 7269 if (!ctlr_is_hard_resettable(board_id)) 7270 return -ENOTSUPP; /* try soft reset later. */ 7271 7272 /* Save the PCI command register */ 7273 pci_read_config_word(pdev, 4, &command_register); 7274 pci_save_state(pdev); 7275 7276 /* find the first memory BAR, so we can find the cfg table */ 7277 rc = hpsa_pci_find_memory_BAR(pdev, &paddr); 7278 if (rc) 7279 return rc; 7280 vaddr = remap_pci_mem(paddr, 0x250); 7281 if (!vaddr) 7282 return -ENOMEM; 7283 7284 /* find cfgtable in order to check if reset via doorbell is supported */ 7285 rc = hpsa_find_cfg_addrs(pdev, vaddr, &cfg_base_addr, 7286 &cfg_base_addr_index, &cfg_offset); 7287 if (rc) 7288 goto unmap_vaddr; 7289 cfgtable = remap_pci_mem(pci_resource_start(pdev, 7290 cfg_base_addr_index) + cfg_offset, sizeof(*cfgtable)); 7291 if (!cfgtable) { 7292 rc = -ENOMEM; 7293 goto unmap_vaddr; 7294 } 7295 rc = write_driver_ver_to_cfgtable(cfgtable); 7296 if (rc) 7297 goto unmap_cfgtable; 7298 7299 /* If reset via doorbell register is supported, use that. 7300 * There are two such methods. Favor the newest method. 7301 */ 7302 misc_fw_support = readl(&cfgtable->misc_fw_support); 7303 use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET2; 7304 if (use_doorbell) { 7305 use_doorbell = DOORBELL_CTLR_RESET2; 7306 } else { 7307 use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET; 7308 if (use_doorbell) { 7309 dev_warn(&pdev->dev, 7310 "Soft reset not supported. Firmware update is required.\n"); 7311 rc = -ENOTSUPP; /* try soft reset */ 7312 goto unmap_cfgtable; 7313 } 7314 } 7315 7316 rc = hpsa_controller_hard_reset(pdev, vaddr, use_doorbell); 7317 if (rc) 7318 goto unmap_cfgtable; 7319 7320 pci_restore_state(pdev); 7321 pci_write_config_word(pdev, 4, command_register); 7322 7323 /* Some devices (notably the HP Smart Array 5i Controller) 7324 need a little pause here */ 7325 msleep(HPSA_POST_RESET_PAUSE_MSECS); 7326 7327 rc = hpsa_wait_for_board_state(pdev, vaddr, BOARD_READY); 7328 if (rc) { 7329 dev_warn(&pdev->dev, 7330 "Failed waiting for board to become ready after hard reset\n"); 7331 goto unmap_cfgtable; 7332 } 7333 7334 rc = controller_reset_failed(vaddr); 7335 if (rc < 0) 7336 goto unmap_cfgtable; 7337 if (rc) { 7338 dev_warn(&pdev->dev, "Unable to successfully reset " 7339 "controller. Will try soft reset.\n"); 7340 rc = -ENOTSUPP; 7341 } else { 7342 dev_info(&pdev->dev, "board ready after hard reset.\n"); 7343 } 7344 7345 unmap_cfgtable: 7346 iounmap(cfgtable); 7347 7348 unmap_vaddr: 7349 iounmap(vaddr); 7350 return rc; 7351 } 7352 7353 /* 7354 * We cannot read the structure directly, for portability we must use 7355 * the io functions. 7356 * This is for debug only. 7357 */ 7358 static void print_cfg_table(struct device *dev, struct CfgTable __iomem *tb) 7359 { 7360 #ifdef HPSA_DEBUG 7361 int i; 7362 char temp_name[17]; 7363 7364 dev_info(dev, "Controller Configuration information\n"); 7365 dev_info(dev, "------------------------------------\n"); 7366 for (i = 0; i < 4; i++) 7367 temp_name[i] = readb(&(tb->Signature[i])); 7368 temp_name[4] = '\0'; 7369 dev_info(dev, " Signature = %s\n", temp_name); 7370 dev_info(dev, " Spec Number = %d\n", readl(&(tb->SpecValence))); 7371 dev_info(dev, " Transport methods supported = 0x%x\n", 7372 readl(&(tb->TransportSupport))); 7373 dev_info(dev, " Transport methods active = 0x%x\n", 7374 readl(&(tb->TransportActive))); 7375 dev_info(dev, " Requested transport Method = 0x%x\n", 7376 readl(&(tb->HostWrite.TransportRequest))); 7377 dev_info(dev, " Coalesce Interrupt Delay = 0x%x\n", 7378 readl(&(tb->HostWrite.CoalIntDelay))); 7379 dev_info(dev, " Coalesce Interrupt Count = 0x%x\n", 7380 readl(&(tb->HostWrite.CoalIntCount))); 7381 dev_info(dev, " Max outstanding commands = %d\n", 7382 readl(&(tb->CmdsOutMax))); 7383 dev_info(dev, " Bus Types = 0x%x\n", readl(&(tb->BusTypes))); 7384 for (i = 0; i < 16; i++) 7385 temp_name[i] = readb(&(tb->ServerName[i])); 7386 temp_name[16] = '\0'; 7387 dev_info(dev, " Server Name = %s\n", temp_name); 7388 dev_info(dev, " Heartbeat Counter = 0x%x\n\n\n", 7389 readl(&(tb->HeartBeat))); 7390 #endif /* HPSA_DEBUG */ 7391 } 7392 7393 static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr) 7394 { 7395 int i, offset, mem_type, bar_type; 7396 7397 if (pci_bar_addr == PCI_BASE_ADDRESS_0) /* looking for BAR zero? */ 7398 return 0; 7399 offset = 0; 7400 for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { 7401 bar_type = pci_resource_flags(pdev, i) & PCI_BASE_ADDRESS_SPACE; 7402 if (bar_type == PCI_BASE_ADDRESS_SPACE_IO) 7403 offset += 4; 7404 else { 7405 mem_type = pci_resource_flags(pdev, i) & 7406 PCI_BASE_ADDRESS_MEM_TYPE_MASK; 7407 switch (mem_type) { 7408 case PCI_BASE_ADDRESS_MEM_TYPE_32: 7409 case PCI_BASE_ADDRESS_MEM_TYPE_1M: 7410 offset += 4; /* 32 bit */ 7411 break; 7412 case PCI_BASE_ADDRESS_MEM_TYPE_64: 7413 offset += 8; 7414 break; 7415 default: /* reserved in PCI 2.2 */ 7416 dev_warn(&pdev->dev, 7417 "base address is invalid\n"); 7418 return -1; 7419 break; 7420 } 7421 } 7422 if (offset == pci_bar_addr - PCI_BASE_ADDRESS_0) 7423 return i + 1; 7424 } 7425 return -1; 7426 } 7427 7428 static void hpsa_disable_interrupt_mode(struct ctlr_info *h) 7429 { 7430 pci_free_irq_vectors(h->pdev); 7431 h->msix_vectors = 0; 7432 } 7433 7434 static void hpsa_setup_reply_map(struct ctlr_info *h) 7435 { 7436 const struct cpumask *mask; 7437 unsigned int queue, cpu; 7438 7439 for (queue = 0; queue < h->msix_vectors; queue++) { 7440 mask = pci_irq_get_affinity(h->pdev, queue); 7441 if (!mask) 7442 goto fallback; 7443 7444 for_each_cpu(cpu, mask) 7445 h->reply_map[cpu] = queue; 7446 } 7447 return; 7448 7449 fallback: 7450 for_each_possible_cpu(cpu) 7451 h->reply_map[cpu] = 0; 7452 } 7453 7454 /* If MSI/MSI-X is supported by the kernel we will try to enable it on 7455 * controllers that are capable. If not, we use legacy INTx mode. 7456 */ 7457 static int hpsa_interrupt_mode(struct ctlr_info *h) 7458 { 7459 unsigned int flags = PCI_IRQ_LEGACY; 7460 int ret; 7461 7462 /* Some boards advertise MSI but don't really support it */ 7463 switch (h->board_id) { 7464 case 0x40700E11: 7465 case 0x40800E11: 7466 case 0x40820E11: 7467 case 0x40830E11: 7468 break; 7469 default: 7470 ret = pci_alloc_irq_vectors(h->pdev, 1, MAX_REPLY_QUEUES, 7471 PCI_IRQ_MSIX | PCI_IRQ_AFFINITY); 7472 if (ret > 0) { 7473 h->msix_vectors = ret; 7474 return 0; 7475 } 7476 7477 flags |= PCI_IRQ_MSI; 7478 break; 7479 } 7480 7481 ret = pci_alloc_irq_vectors(h->pdev, 1, 1, flags); 7482 if (ret < 0) 7483 return ret; 7484 return 0; 7485 } 7486 7487 static int hpsa_lookup_board_id(struct pci_dev *pdev, u32 *board_id, 7488 bool *legacy_board) 7489 { 7490 int i; 7491 u32 subsystem_vendor_id, subsystem_device_id; 7492 7493 subsystem_vendor_id = pdev->subsystem_vendor; 7494 subsystem_device_id = pdev->subsystem_device; 7495 *board_id = ((subsystem_device_id << 16) & 0xffff0000) | 7496 subsystem_vendor_id; 7497 7498 if (legacy_board) 7499 *legacy_board = false; 7500 for (i = 0; i < ARRAY_SIZE(products); i++) 7501 if (*board_id == products[i].board_id) { 7502 if (products[i].access != &SA5A_access && 7503 products[i].access != &SA5B_access) 7504 return i; 7505 dev_warn(&pdev->dev, 7506 "legacy board ID: 0x%08x\n", 7507 *board_id); 7508 if (legacy_board) 7509 *legacy_board = true; 7510 return i; 7511 } 7512 7513 dev_warn(&pdev->dev, "unrecognized board ID: 0x%08x\n", *board_id); 7514 if (legacy_board) 7515 *legacy_board = true; 7516 return ARRAY_SIZE(products) - 1; /* generic unknown smart array */ 7517 } 7518 7519 static int hpsa_pci_find_memory_BAR(struct pci_dev *pdev, 7520 unsigned long *memory_bar) 7521 { 7522 int i; 7523 7524 for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) 7525 if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) { 7526 /* addressing mode bits already removed */ 7527 *memory_bar = pci_resource_start(pdev, i); 7528 dev_dbg(&pdev->dev, "memory BAR = %lx\n", 7529 *memory_bar); 7530 return 0; 7531 } 7532 dev_warn(&pdev->dev, "no memory BAR found\n"); 7533 return -ENODEV; 7534 } 7535 7536 static int hpsa_wait_for_board_state(struct pci_dev *pdev, void __iomem *vaddr, 7537 int wait_for_ready) 7538 { 7539 int i, iterations; 7540 u32 scratchpad; 7541 if (wait_for_ready) 7542 iterations = HPSA_BOARD_READY_ITERATIONS; 7543 else 7544 iterations = HPSA_BOARD_NOT_READY_ITERATIONS; 7545 7546 for (i = 0; i < iterations; i++) { 7547 scratchpad = readl(vaddr + SA5_SCRATCHPAD_OFFSET); 7548 if (wait_for_ready) { 7549 if (scratchpad == HPSA_FIRMWARE_READY) 7550 return 0; 7551 } else { 7552 if (scratchpad != HPSA_FIRMWARE_READY) 7553 return 0; 7554 } 7555 msleep(HPSA_BOARD_READY_POLL_INTERVAL_MSECS); 7556 } 7557 dev_warn(&pdev->dev, "board not ready, timed out.\n"); 7558 return -ENODEV; 7559 } 7560 7561 static int hpsa_find_cfg_addrs(struct pci_dev *pdev, void __iomem *vaddr, 7562 u32 *cfg_base_addr, u64 *cfg_base_addr_index, 7563 u64 *cfg_offset) 7564 { 7565 *cfg_base_addr = readl(vaddr + SA5_CTCFG_OFFSET); 7566 *cfg_offset = readl(vaddr + SA5_CTMEM_OFFSET); 7567 *cfg_base_addr &= (u32) 0x0000ffff; 7568 *cfg_base_addr_index = find_PCI_BAR_index(pdev, *cfg_base_addr); 7569 if (*cfg_base_addr_index == -1) { 7570 dev_warn(&pdev->dev, "cannot find cfg_base_addr_index\n"); 7571 return -ENODEV; 7572 } 7573 return 0; 7574 } 7575 7576 static void hpsa_free_cfgtables(struct ctlr_info *h) 7577 { 7578 if (h->transtable) { 7579 iounmap(h->transtable); 7580 h->transtable = NULL; 7581 } 7582 if (h->cfgtable) { 7583 iounmap(h->cfgtable); 7584 h->cfgtable = NULL; 7585 } 7586 } 7587 7588 /* Find and map CISS config table and transfer table 7589 + * several items must be unmapped (freed) later 7590 + * */ 7591 static int hpsa_find_cfgtables(struct ctlr_info *h) 7592 { 7593 u64 cfg_offset; 7594 u32 cfg_base_addr; 7595 u64 cfg_base_addr_index; 7596 u32 trans_offset; 7597 int rc; 7598 7599 rc = hpsa_find_cfg_addrs(h->pdev, h->vaddr, &cfg_base_addr, 7600 &cfg_base_addr_index, &cfg_offset); 7601 if (rc) 7602 return rc; 7603 h->cfgtable = remap_pci_mem(pci_resource_start(h->pdev, 7604 cfg_base_addr_index) + cfg_offset, sizeof(*h->cfgtable)); 7605 if (!h->cfgtable) { 7606 dev_err(&h->pdev->dev, "Failed mapping cfgtable\n"); 7607 return -ENOMEM; 7608 } 7609 rc = write_driver_ver_to_cfgtable(h->cfgtable); 7610 if (rc) 7611 return rc; 7612 /* Find performant mode table. */ 7613 trans_offset = readl(&h->cfgtable->TransMethodOffset); 7614 h->transtable = remap_pci_mem(pci_resource_start(h->pdev, 7615 cfg_base_addr_index)+cfg_offset+trans_offset, 7616 sizeof(*h->transtable)); 7617 if (!h->transtable) { 7618 dev_err(&h->pdev->dev, "Failed mapping transfer table\n"); 7619 hpsa_free_cfgtables(h); 7620 return -ENOMEM; 7621 } 7622 return 0; 7623 } 7624 7625 static void hpsa_get_max_perf_mode_cmds(struct ctlr_info *h) 7626 { 7627 #define MIN_MAX_COMMANDS 16 7628 BUILD_BUG_ON(MIN_MAX_COMMANDS <= HPSA_NRESERVED_CMDS); 7629 7630 h->max_commands = readl(&h->cfgtable->MaxPerformantModeCommands); 7631 7632 /* Limit commands in memory limited kdump scenario. */ 7633 if (reset_devices && h->max_commands > 32) 7634 h->max_commands = 32; 7635 7636 if (h->max_commands < MIN_MAX_COMMANDS) { 7637 dev_warn(&h->pdev->dev, 7638 "Controller reports max supported commands of %d Using %d instead. Ensure that firmware is up to date.\n", 7639 h->max_commands, 7640 MIN_MAX_COMMANDS); 7641 h->max_commands = MIN_MAX_COMMANDS; 7642 } 7643 } 7644 7645 /* If the controller reports that the total max sg entries is greater than 512, 7646 * then we know that chained SG blocks work. (Original smart arrays did not 7647 * support chained SG blocks and would return zero for max sg entries.) 7648 */ 7649 static int hpsa_supports_chained_sg_blocks(struct ctlr_info *h) 7650 { 7651 return h->maxsgentries > 512; 7652 } 7653 7654 /* Interrogate the hardware for some limits: 7655 * max commands, max SG elements without chaining, and with chaining, 7656 * SG chain block size, etc. 7657 */ 7658 static void hpsa_find_board_params(struct ctlr_info *h) 7659 { 7660 hpsa_get_max_perf_mode_cmds(h); 7661 h->nr_cmds = h->max_commands; 7662 h->maxsgentries = readl(&(h->cfgtable->MaxScatterGatherElements)); 7663 h->fw_support = readl(&(h->cfgtable->misc_fw_support)); 7664 if (hpsa_supports_chained_sg_blocks(h)) { 7665 /* Limit in-command s/g elements to 32 save dma'able memory. */ 7666 h->max_cmd_sg_entries = 32; 7667 h->chainsize = h->maxsgentries - h->max_cmd_sg_entries; 7668 h->maxsgentries--; /* save one for chain pointer */ 7669 } else { 7670 /* 7671 * Original smart arrays supported at most 31 s/g entries 7672 * embedded inline in the command (trying to use more 7673 * would lock up the controller) 7674 */ 7675 h->max_cmd_sg_entries = 31; 7676 h->maxsgentries = 31; /* default to traditional values */ 7677 h->chainsize = 0; 7678 } 7679 7680 /* Find out what task management functions are supported and cache */ 7681 h->TMFSupportFlags = readl(&(h->cfgtable->TMFSupportFlags)); 7682 if (!(HPSATMF_PHYS_TASK_ABORT & h->TMFSupportFlags)) 7683 dev_warn(&h->pdev->dev, "Physical aborts not supported\n"); 7684 if (!(HPSATMF_LOG_TASK_ABORT & h->TMFSupportFlags)) 7685 dev_warn(&h->pdev->dev, "Logical aborts not supported\n"); 7686 if (!(HPSATMF_IOACCEL_ENABLED & h->TMFSupportFlags)) 7687 dev_warn(&h->pdev->dev, "HP SSD Smart Path aborts not supported\n"); 7688 } 7689 7690 static inline bool hpsa_CISS_signature_present(struct ctlr_info *h) 7691 { 7692 if (!check_signature(h->cfgtable->Signature, "CISS", 4)) { 7693 dev_err(&h->pdev->dev, "not a valid CISS config table\n"); 7694 return false; 7695 } 7696 return true; 7697 } 7698 7699 static inline void hpsa_set_driver_support_bits(struct ctlr_info *h) 7700 { 7701 u32 driver_support; 7702 7703 driver_support = readl(&(h->cfgtable->driver_support)); 7704 /* Need to enable prefetch in the SCSI core for 6400 in x86 */ 7705 #ifdef CONFIG_X86 7706 driver_support |= ENABLE_SCSI_PREFETCH; 7707 #endif 7708 driver_support |= ENABLE_UNIT_ATTN; 7709 writel(driver_support, &(h->cfgtable->driver_support)); 7710 } 7711 7712 /* Disable DMA prefetch for the P600. Otherwise an ASIC bug may result 7713 * in a prefetch beyond physical memory. 7714 */ 7715 static inline void hpsa_p600_dma_prefetch_quirk(struct ctlr_info *h) 7716 { 7717 u32 dma_prefetch; 7718 7719 if (h->board_id != 0x3225103C) 7720 return; 7721 dma_prefetch = readl(h->vaddr + I2O_DMA1_CFG); 7722 dma_prefetch |= 0x8000; 7723 writel(dma_prefetch, h->vaddr + I2O_DMA1_CFG); 7724 } 7725 7726 static int hpsa_wait_for_clear_event_notify_ack(struct ctlr_info *h) 7727 { 7728 int i; 7729 u32 doorbell_value; 7730 unsigned long flags; 7731 /* wait until the clear_event_notify bit 6 is cleared by controller. */ 7732 for (i = 0; i < MAX_CLEAR_EVENT_WAIT; i++) { 7733 spin_lock_irqsave(&h->lock, flags); 7734 doorbell_value = readl(h->vaddr + SA5_DOORBELL); 7735 spin_unlock_irqrestore(&h->lock, flags); 7736 if (!(doorbell_value & DOORBELL_CLEAR_EVENTS)) 7737 goto done; 7738 /* delay and try again */ 7739 msleep(CLEAR_EVENT_WAIT_INTERVAL); 7740 } 7741 return -ENODEV; 7742 done: 7743 return 0; 7744 } 7745 7746 static int hpsa_wait_for_mode_change_ack(struct ctlr_info *h) 7747 { 7748 int i; 7749 u32 doorbell_value; 7750 unsigned long flags; 7751 7752 /* under certain very rare conditions, this can take awhile. 7753 * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right 7754 * as we enter this code.) 7755 */ 7756 for (i = 0; i < MAX_MODE_CHANGE_WAIT; i++) { 7757 if (h->remove_in_progress) 7758 goto done; 7759 spin_lock_irqsave(&h->lock, flags); 7760 doorbell_value = readl(h->vaddr + SA5_DOORBELL); 7761 spin_unlock_irqrestore(&h->lock, flags); 7762 if (!(doorbell_value & CFGTBL_ChangeReq)) 7763 goto done; 7764 /* delay and try again */ 7765 msleep(MODE_CHANGE_WAIT_INTERVAL); 7766 } 7767 return -ENODEV; 7768 done: 7769 return 0; 7770 } 7771 7772 /* return -ENODEV or other reason on error, 0 on success */ 7773 static int hpsa_enter_simple_mode(struct ctlr_info *h) 7774 { 7775 u32 trans_support; 7776 7777 trans_support = readl(&(h->cfgtable->TransportSupport)); 7778 if (!(trans_support & SIMPLE_MODE)) 7779 return -ENOTSUPP; 7780 7781 h->max_commands = readl(&(h->cfgtable->CmdsOutMax)); 7782 7783 /* Update the field, and then ring the doorbell */ 7784 writel(CFGTBL_Trans_Simple, &(h->cfgtable->HostWrite.TransportRequest)); 7785 writel(0, &h->cfgtable->HostWrite.command_pool_addr_hi); 7786 writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL); 7787 if (hpsa_wait_for_mode_change_ack(h)) 7788 goto error; 7789 print_cfg_table(&h->pdev->dev, h->cfgtable); 7790 if (!(readl(&(h->cfgtable->TransportActive)) & CFGTBL_Trans_Simple)) 7791 goto error; 7792 h->transMethod = CFGTBL_Trans_Simple; 7793 return 0; 7794 error: 7795 dev_err(&h->pdev->dev, "failed to enter simple mode\n"); 7796 return -ENODEV; 7797 } 7798 7799 /* free items allocated or mapped by hpsa_pci_init */ 7800 static void hpsa_free_pci_init(struct ctlr_info *h) 7801 { 7802 hpsa_free_cfgtables(h); /* pci_init 4 */ 7803 iounmap(h->vaddr); /* pci_init 3 */ 7804 h->vaddr = NULL; 7805 hpsa_disable_interrupt_mode(h); /* pci_init 2 */ 7806 /* 7807 * call pci_disable_device before pci_release_regions per 7808 * Documentation/driver-api/pci/pci.rst 7809 */ 7810 pci_disable_device(h->pdev); /* pci_init 1 */ 7811 pci_release_regions(h->pdev); /* pci_init 2 */ 7812 } 7813 7814 /* several items must be freed later */ 7815 static int hpsa_pci_init(struct ctlr_info *h) 7816 { 7817 int prod_index, err; 7818 bool legacy_board; 7819 7820 prod_index = hpsa_lookup_board_id(h->pdev, &h->board_id, &legacy_board); 7821 if (prod_index < 0) 7822 return prod_index; 7823 h->product_name = products[prod_index].product_name; 7824 h->access = *(products[prod_index].access); 7825 h->legacy_board = legacy_board; 7826 pci_disable_link_state(h->pdev, PCIE_LINK_STATE_L0S | 7827 PCIE_LINK_STATE_L1 | PCIE_LINK_STATE_CLKPM); 7828 7829 err = pci_enable_device(h->pdev); 7830 if (err) { 7831 dev_err(&h->pdev->dev, "failed to enable PCI device\n"); 7832 pci_disable_device(h->pdev); 7833 return err; 7834 } 7835 7836 err = pci_request_regions(h->pdev, HPSA); 7837 if (err) { 7838 dev_err(&h->pdev->dev, 7839 "failed to obtain PCI resources\n"); 7840 pci_disable_device(h->pdev); 7841 return err; 7842 } 7843 7844 pci_set_master(h->pdev); 7845 7846 err = hpsa_interrupt_mode(h); 7847 if (err) 7848 goto clean1; 7849 7850 /* setup mapping between CPU and reply queue */ 7851 hpsa_setup_reply_map(h); 7852 7853 err = hpsa_pci_find_memory_BAR(h->pdev, &h->paddr); 7854 if (err) 7855 goto clean2; /* intmode+region, pci */ 7856 h->vaddr = remap_pci_mem(h->paddr, 0x250); 7857 if (!h->vaddr) { 7858 dev_err(&h->pdev->dev, "failed to remap PCI mem\n"); 7859 err = -ENOMEM; 7860 goto clean2; /* intmode+region, pci */ 7861 } 7862 err = hpsa_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY); 7863 if (err) 7864 goto clean3; /* vaddr, intmode+region, pci */ 7865 err = hpsa_find_cfgtables(h); 7866 if (err) 7867 goto clean3; /* vaddr, intmode+region, pci */ 7868 hpsa_find_board_params(h); 7869 7870 if (!hpsa_CISS_signature_present(h)) { 7871 err = -ENODEV; 7872 goto clean4; /* cfgtables, vaddr, intmode+region, pci */ 7873 } 7874 hpsa_set_driver_support_bits(h); 7875 hpsa_p600_dma_prefetch_quirk(h); 7876 err = hpsa_enter_simple_mode(h); 7877 if (err) 7878 goto clean4; /* cfgtables, vaddr, intmode+region, pci */ 7879 return 0; 7880 7881 clean4: /* cfgtables, vaddr, intmode+region, pci */ 7882 hpsa_free_cfgtables(h); 7883 clean3: /* vaddr, intmode+region, pci */ 7884 iounmap(h->vaddr); 7885 h->vaddr = NULL; 7886 clean2: /* intmode+region, pci */ 7887 hpsa_disable_interrupt_mode(h); 7888 clean1: 7889 /* 7890 * call pci_disable_device before pci_release_regions per 7891 * Documentation/driver-api/pci/pci.rst 7892 */ 7893 pci_disable_device(h->pdev); 7894 pci_release_regions(h->pdev); 7895 return err; 7896 } 7897 7898 static void hpsa_hba_inquiry(struct ctlr_info *h) 7899 { 7900 int rc; 7901 7902 #define HBA_INQUIRY_BYTE_COUNT 64 7903 h->hba_inquiry_data = kmalloc(HBA_INQUIRY_BYTE_COUNT, GFP_KERNEL); 7904 if (!h->hba_inquiry_data) 7905 return; 7906 rc = hpsa_scsi_do_inquiry(h, RAID_CTLR_LUNID, 0, 7907 h->hba_inquiry_data, HBA_INQUIRY_BYTE_COUNT); 7908 if (rc != 0) { 7909 kfree(h->hba_inquiry_data); 7910 h->hba_inquiry_data = NULL; 7911 } 7912 } 7913 7914 static int hpsa_init_reset_devices(struct pci_dev *pdev, u32 board_id) 7915 { 7916 int rc, i; 7917 void __iomem *vaddr; 7918 7919 if (!reset_devices) 7920 return 0; 7921 7922 /* kdump kernel is loading, we don't know in which state is 7923 * the pci interface. The dev->enable_cnt is equal zero 7924 * so we call enable+disable, wait a while and switch it on. 7925 */ 7926 rc = pci_enable_device(pdev); 7927 if (rc) { 7928 dev_warn(&pdev->dev, "Failed to enable PCI device\n"); 7929 return -ENODEV; 7930 } 7931 pci_disable_device(pdev); 7932 msleep(260); /* a randomly chosen number */ 7933 rc = pci_enable_device(pdev); 7934 if (rc) { 7935 dev_warn(&pdev->dev, "failed to enable device.\n"); 7936 return -ENODEV; 7937 } 7938 7939 pci_set_master(pdev); 7940 7941 vaddr = pci_ioremap_bar(pdev, 0); 7942 if (vaddr == NULL) { 7943 rc = -ENOMEM; 7944 goto out_disable; 7945 } 7946 writel(SA5_INTR_OFF, vaddr + SA5_REPLY_INTR_MASK_OFFSET); 7947 iounmap(vaddr); 7948 7949 /* Reset the controller with a PCI power-cycle or via doorbell */ 7950 rc = hpsa_kdump_hard_reset_controller(pdev, board_id); 7951 7952 /* -ENOTSUPP here means we cannot reset the controller 7953 * but it's already (and still) up and running in 7954 * "performant mode". Or, it might be 640x, which can't reset 7955 * due to concerns about shared bbwc between 6402/6404 pair. 7956 */ 7957 if (rc) 7958 goto out_disable; 7959 7960 /* Now try to get the controller to respond to a no-op */ 7961 dev_info(&pdev->dev, "Waiting for controller to respond to no-op\n"); 7962 for (i = 0; i < HPSA_POST_RESET_NOOP_RETRIES; i++) { 7963 if (hpsa_noop(pdev) == 0) 7964 break; 7965 else 7966 dev_warn(&pdev->dev, "no-op failed%s\n", 7967 (i < 11 ? "; re-trying" : "")); 7968 } 7969 7970 out_disable: 7971 7972 pci_disable_device(pdev); 7973 return rc; 7974 } 7975 7976 static void hpsa_free_cmd_pool(struct ctlr_info *h) 7977 { 7978 kfree(h->cmd_pool_bits); 7979 h->cmd_pool_bits = NULL; 7980 if (h->cmd_pool) { 7981 dma_free_coherent(&h->pdev->dev, 7982 h->nr_cmds * sizeof(struct CommandList), 7983 h->cmd_pool, 7984 h->cmd_pool_dhandle); 7985 h->cmd_pool = NULL; 7986 h->cmd_pool_dhandle = 0; 7987 } 7988 if (h->errinfo_pool) { 7989 dma_free_coherent(&h->pdev->dev, 7990 h->nr_cmds * sizeof(struct ErrorInfo), 7991 h->errinfo_pool, 7992 h->errinfo_pool_dhandle); 7993 h->errinfo_pool = NULL; 7994 h->errinfo_pool_dhandle = 0; 7995 } 7996 } 7997 7998 static int hpsa_alloc_cmd_pool(struct ctlr_info *h) 7999 { 8000 h->cmd_pool_bits = kcalloc(DIV_ROUND_UP(h->nr_cmds, BITS_PER_LONG), 8001 sizeof(unsigned long), 8002 GFP_KERNEL); 8003 h->cmd_pool = dma_alloc_coherent(&h->pdev->dev, 8004 h->nr_cmds * sizeof(*h->cmd_pool), 8005 &h->cmd_pool_dhandle, GFP_KERNEL); 8006 h->errinfo_pool = dma_alloc_coherent(&h->pdev->dev, 8007 h->nr_cmds * sizeof(*h->errinfo_pool), 8008 &h->errinfo_pool_dhandle, GFP_KERNEL); 8009 if ((h->cmd_pool_bits == NULL) 8010 || (h->cmd_pool == NULL) 8011 || (h->errinfo_pool == NULL)) { 8012 dev_err(&h->pdev->dev, "out of memory in %s", __func__); 8013 goto clean_up; 8014 } 8015 hpsa_preinitialize_commands(h); 8016 return 0; 8017 clean_up: 8018 hpsa_free_cmd_pool(h); 8019 return -ENOMEM; 8020 } 8021 8022 /* clear affinity hints and free MSI-X, MSI, or legacy INTx vectors */ 8023 static void hpsa_free_irqs(struct ctlr_info *h) 8024 { 8025 int i; 8026 int irq_vector = 0; 8027 8028 if (hpsa_simple_mode) 8029 irq_vector = h->intr_mode; 8030 8031 if (!h->msix_vectors || h->intr_mode != PERF_MODE_INT) { 8032 /* Single reply queue, only one irq to free */ 8033 free_irq(pci_irq_vector(h->pdev, irq_vector), 8034 &h->q[h->intr_mode]); 8035 h->q[h->intr_mode] = 0; 8036 return; 8037 } 8038 8039 for (i = 0; i < h->msix_vectors; i++) { 8040 free_irq(pci_irq_vector(h->pdev, i), &h->q[i]); 8041 h->q[i] = 0; 8042 } 8043 for (; i < MAX_REPLY_QUEUES; i++) 8044 h->q[i] = 0; 8045 } 8046 8047 /* returns 0 on success; cleans up and returns -Enn on error */ 8048 static int hpsa_request_irqs(struct ctlr_info *h, 8049 irqreturn_t (*msixhandler)(int, void *), 8050 irqreturn_t (*intxhandler)(int, void *)) 8051 { 8052 int rc, i; 8053 int irq_vector = 0; 8054 8055 if (hpsa_simple_mode) 8056 irq_vector = h->intr_mode; 8057 8058 /* 8059 * initialize h->q[x] = x so that interrupt handlers know which 8060 * queue to process. 8061 */ 8062 for (i = 0; i < MAX_REPLY_QUEUES; i++) 8063 h->q[i] = (u8) i; 8064 8065 if (h->intr_mode == PERF_MODE_INT && h->msix_vectors > 0) { 8066 /* If performant mode and MSI-X, use multiple reply queues */ 8067 for (i = 0; i < h->msix_vectors; i++) { 8068 sprintf(h->intrname[i], "%s-msix%d", h->devname, i); 8069 rc = request_irq(pci_irq_vector(h->pdev, i), msixhandler, 8070 0, h->intrname[i], 8071 &h->q[i]); 8072 if (rc) { 8073 int j; 8074 8075 dev_err(&h->pdev->dev, 8076 "failed to get irq %d for %s\n", 8077 pci_irq_vector(h->pdev, i), h->devname); 8078 for (j = 0; j < i; j++) { 8079 free_irq(pci_irq_vector(h->pdev, j), &h->q[j]); 8080 h->q[j] = 0; 8081 } 8082 for (; j < MAX_REPLY_QUEUES; j++) 8083 h->q[j] = 0; 8084 return rc; 8085 } 8086 } 8087 } else { 8088 /* Use single reply pool */ 8089 if (h->msix_vectors > 0 || h->pdev->msi_enabled) { 8090 sprintf(h->intrname[0], "%s-msi%s", h->devname, 8091 h->msix_vectors ? "x" : ""); 8092 rc = request_irq(pci_irq_vector(h->pdev, irq_vector), 8093 msixhandler, 0, 8094 h->intrname[0], 8095 &h->q[h->intr_mode]); 8096 } else { 8097 sprintf(h->intrname[h->intr_mode], 8098 "%s-intx", h->devname); 8099 rc = request_irq(pci_irq_vector(h->pdev, irq_vector), 8100 intxhandler, IRQF_SHARED, 8101 h->intrname[0], 8102 &h->q[h->intr_mode]); 8103 } 8104 } 8105 if (rc) { 8106 dev_err(&h->pdev->dev, "failed to get irq %d for %s\n", 8107 pci_irq_vector(h->pdev, irq_vector), h->devname); 8108 hpsa_free_irqs(h); 8109 return -ENODEV; 8110 } 8111 return 0; 8112 } 8113 8114 static int hpsa_kdump_soft_reset(struct ctlr_info *h) 8115 { 8116 int rc; 8117 hpsa_send_host_reset(h, HPSA_RESET_TYPE_CONTROLLER); 8118 8119 dev_info(&h->pdev->dev, "Waiting for board to soft reset.\n"); 8120 rc = hpsa_wait_for_board_state(h->pdev, h->vaddr, BOARD_NOT_READY); 8121 if (rc) { 8122 dev_warn(&h->pdev->dev, "Soft reset had no effect.\n"); 8123 return rc; 8124 } 8125 8126 dev_info(&h->pdev->dev, "Board reset, awaiting READY status.\n"); 8127 rc = hpsa_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY); 8128 if (rc) { 8129 dev_warn(&h->pdev->dev, "Board failed to become ready " 8130 "after soft reset.\n"); 8131 return rc; 8132 } 8133 8134 return 0; 8135 } 8136 8137 static void hpsa_free_reply_queues(struct ctlr_info *h) 8138 { 8139 int i; 8140 8141 for (i = 0; i < h->nreply_queues; i++) { 8142 if (!h->reply_queue[i].head) 8143 continue; 8144 dma_free_coherent(&h->pdev->dev, 8145 h->reply_queue_size, 8146 h->reply_queue[i].head, 8147 h->reply_queue[i].busaddr); 8148 h->reply_queue[i].head = NULL; 8149 h->reply_queue[i].busaddr = 0; 8150 } 8151 h->reply_queue_size = 0; 8152 } 8153 8154 static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h) 8155 { 8156 hpsa_free_performant_mode(h); /* init_one 7 */ 8157 hpsa_free_sg_chain_blocks(h); /* init_one 6 */ 8158 hpsa_free_cmd_pool(h); /* init_one 5 */ 8159 hpsa_free_irqs(h); /* init_one 4 */ 8160 scsi_host_put(h->scsi_host); /* init_one 3 */ 8161 h->scsi_host = NULL; /* init_one 3 */ 8162 hpsa_free_pci_init(h); /* init_one 2_5 */ 8163 free_percpu(h->lockup_detected); /* init_one 2 */ 8164 h->lockup_detected = NULL; /* init_one 2 */ 8165 if (h->resubmit_wq) { 8166 destroy_workqueue(h->resubmit_wq); /* init_one 1 */ 8167 h->resubmit_wq = NULL; 8168 } 8169 if (h->rescan_ctlr_wq) { 8170 destroy_workqueue(h->rescan_ctlr_wq); 8171 h->rescan_ctlr_wq = NULL; 8172 } 8173 if (h->monitor_ctlr_wq) { 8174 destroy_workqueue(h->monitor_ctlr_wq); 8175 h->monitor_ctlr_wq = NULL; 8176 } 8177 8178 kfree(h); /* init_one 1 */ 8179 } 8180 8181 /* Called when controller lockup detected. */ 8182 static void fail_all_outstanding_cmds(struct ctlr_info *h) 8183 { 8184 int i, refcount; 8185 struct CommandList *c; 8186 int failcount = 0; 8187 8188 flush_workqueue(h->resubmit_wq); /* ensure all cmds are fully built */ 8189 for (i = 0; i < h->nr_cmds; i++) { 8190 c = h->cmd_pool + i; 8191 refcount = atomic_inc_return(&c->refcount); 8192 if (refcount > 1) { 8193 c->err_info->CommandStatus = CMD_CTLR_LOCKUP; 8194 finish_cmd(c); 8195 atomic_dec(&h->commands_outstanding); 8196 failcount++; 8197 } 8198 cmd_free(h, c); 8199 } 8200 dev_warn(&h->pdev->dev, 8201 "failed %d commands in fail_all\n", failcount); 8202 } 8203 8204 static void set_lockup_detected_for_all_cpus(struct ctlr_info *h, u32 value) 8205 { 8206 int cpu; 8207 8208 for_each_online_cpu(cpu) { 8209 u32 *lockup_detected; 8210 lockup_detected = per_cpu_ptr(h->lockup_detected, cpu); 8211 *lockup_detected = value; 8212 } 8213 wmb(); /* be sure the per-cpu variables are out to memory */ 8214 } 8215 8216 static void controller_lockup_detected(struct ctlr_info *h) 8217 { 8218 unsigned long flags; 8219 u32 lockup_detected; 8220 8221 h->access.set_intr_mask(h, HPSA_INTR_OFF); 8222 spin_lock_irqsave(&h->lock, flags); 8223 lockup_detected = readl(h->vaddr + SA5_SCRATCHPAD_OFFSET); 8224 if (!lockup_detected) { 8225 /* no heartbeat, but controller gave us a zero. */ 8226 dev_warn(&h->pdev->dev, 8227 "lockup detected after %d but scratchpad register is zero\n", 8228 h->heartbeat_sample_interval / HZ); 8229 lockup_detected = 0xffffffff; 8230 } 8231 set_lockup_detected_for_all_cpus(h, lockup_detected); 8232 spin_unlock_irqrestore(&h->lock, flags); 8233 dev_warn(&h->pdev->dev, "Controller lockup detected: 0x%08x after %d\n", 8234 lockup_detected, h->heartbeat_sample_interval / HZ); 8235 if (lockup_detected == 0xffff0000) { 8236 dev_warn(&h->pdev->dev, "Telling controller to do a CHKPT\n"); 8237 writel(DOORBELL_GENERATE_CHKPT, h->vaddr + SA5_DOORBELL); 8238 } 8239 pci_disable_device(h->pdev); 8240 fail_all_outstanding_cmds(h); 8241 } 8242 8243 static int detect_controller_lockup(struct ctlr_info *h) 8244 { 8245 u64 now; 8246 u32 heartbeat; 8247 unsigned long flags; 8248 8249 now = get_jiffies_64(); 8250 /* If we've received an interrupt recently, we're ok. */ 8251 if (time_after64(h->last_intr_timestamp + 8252 (h->heartbeat_sample_interval), now)) 8253 return false; 8254 8255 /* 8256 * If we've already checked the heartbeat recently, we're ok. 8257 * This could happen if someone sends us a signal. We 8258 * otherwise don't care about signals in this thread. 8259 */ 8260 if (time_after64(h->last_heartbeat_timestamp + 8261 (h->heartbeat_sample_interval), now)) 8262 return false; 8263 8264 /* If heartbeat has not changed since we last looked, we're not ok. */ 8265 spin_lock_irqsave(&h->lock, flags); 8266 heartbeat = readl(&h->cfgtable->HeartBeat); 8267 spin_unlock_irqrestore(&h->lock, flags); 8268 if (h->last_heartbeat == heartbeat) { 8269 controller_lockup_detected(h); 8270 return true; 8271 } 8272 8273 /* We're ok. */ 8274 h->last_heartbeat = heartbeat; 8275 h->last_heartbeat_timestamp = now; 8276 return false; 8277 } 8278 8279 /* 8280 * Set ioaccel status for all ioaccel volumes. 8281 * 8282 * Called from monitor controller worker (hpsa_event_monitor_worker) 8283 * 8284 * A Volume (or Volumes that comprise an Array set may be undergoing a 8285 * transformation, so we will be turning off ioaccel for all volumes that 8286 * make up the Array. 8287 */ 8288 static void hpsa_set_ioaccel_status(struct ctlr_info *h) 8289 { 8290 int rc; 8291 int i; 8292 u8 ioaccel_status; 8293 unsigned char *buf; 8294 struct hpsa_scsi_dev_t *device; 8295 8296 if (!h) 8297 return; 8298 8299 buf = kmalloc(64, GFP_KERNEL); 8300 if (!buf) 8301 return; 8302 8303 /* 8304 * Run through current device list used during I/O requests. 8305 */ 8306 for (i = 0; i < h->ndevices; i++) { 8307 device = h->dev[i]; 8308 8309 if (!device) 8310 continue; 8311 if (!hpsa_vpd_page_supported(h, device->scsi3addr, 8312 HPSA_VPD_LV_IOACCEL_STATUS)) 8313 continue; 8314 8315 memset(buf, 0, 64); 8316 8317 rc = hpsa_scsi_do_inquiry(h, device->scsi3addr, 8318 VPD_PAGE | HPSA_VPD_LV_IOACCEL_STATUS, 8319 buf, 64); 8320 if (rc != 0) 8321 continue; 8322 8323 ioaccel_status = buf[IOACCEL_STATUS_BYTE]; 8324 device->offload_config = 8325 !!(ioaccel_status & OFFLOAD_CONFIGURED_BIT); 8326 if (device->offload_config) 8327 device->offload_to_be_enabled = 8328 !!(ioaccel_status & OFFLOAD_ENABLED_BIT); 8329 8330 /* 8331 * Immediately turn off ioaccel for any volume the 8332 * controller tells us to. Some of the reasons could be: 8333 * transformation - change to the LVs of an Array. 8334 * degraded volume - component failure 8335 * 8336 * If ioaccel is to be re-enabled, re-enable later during the 8337 * scan operation so the driver can get a fresh raidmap 8338 * before turning ioaccel back on. 8339 * 8340 */ 8341 if (!device->offload_to_be_enabled) 8342 device->offload_enabled = 0; 8343 } 8344 8345 kfree(buf); 8346 } 8347 8348 static void hpsa_ack_ctlr_events(struct ctlr_info *h) 8349 { 8350 char *event_type; 8351 8352 if (!(h->fw_support & MISC_FW_EVENT_NOTIFY)) 8353 return; 8354 8355 /* Ask the controller to clear the events we're handling. */ 8356 if ((h->transMethod & (CFGTBL_Trans_io_accel1 8357 | CFGTBL_Trans_io_accel2)) && 8358 (h->events & HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_STATE_CHANGE || 8359 h->events & HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_CONFIG_CHANGE)) { 8360 8361 if (h->events & HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_STATE_CHANGE) 8362 event_type = "state change"; 8363 if (h->events & HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_CONFIG_CHANGE) 8364 event_type = "configuration change"; 8365 /* Stop sending new RAID offload reqs via the IO accelerator */ 8366 scsi_block_requests(h->scsi_host); 8367 hpsa_set_ioaccel_status(h); 8368 hpsa_drain_accel_commands(h); 8369 /* Set 'accelerator path config change' bit */ 8370 dev_warn(&h->pdev->dev, 8371 "Acknowledging event: 0x%08x (HP SSD Smart Path %s)\n", 8372 h->events, event_type); 8373 writel(h->events, &(h->cfgtable->clear_event_notify)); 8374 /* Set the "clear event notify field update" bit 6 */ 8375 writel(DOORBELL_CLEAR_EVENTS, h->vaddr + SA5_DOORBELL); 8376 /* Wait until ctlr clears 'clear event notify field', bit 6 */ 8377 hpsa_wait_for_clear_event_notify_ack(h); 8378 scsi_unblock_requests(h->scsi_host); 8379 } else { 8380 /* Acknowledge controller notification events. */ 8381 writel(h->events, &(h->cfgtable->clear_event_notify)); 8382 writel(DOORBELL_CLEAR_EVENTS, h->vaddr + SA5_DOORBELL); 8383 hpsa_wait_for_clear_event_notify_ack(h); 8384 } 8385 return; 8386 } 8387 8388 /* Check a register on the controller to see if there are configuration 8389 * changes (added/changed/removed logical drives, etc.) which mean that 8390 * we should rescan the controller for devices. 8391 * Also check flag for driver-initiated rescan. 8392 */ 8393 static int hpsa_ctlr_needs_rescan(struct ctlr_info *h) 8394 { 8395 if (h->drv_req_rescan) { 8396 h->drv_req_rescan = 0; 8397 return 1; 8398 } 8399 8400 if (!(h->fw_support & MISC_FW_EVENT_NOTIFY)) 8401 return 0; 8402 8403 h->events = readl(&(h->cfgtable->event_notify)); 8404 return h->events & RESCAN_REQUIRED_EVENT_BITS; 8405 } 8406 8407 /* 8408 * Check if any of the offline devices have become ready 8409 */ 8410 static int hpsa_offline_devices_ready(struct ctlr_info *h) 8411 { 8412 unsigned long flags; 8413 struct offline_device_entry *d; 8414 struct list_head *this, *tmp; 8415 8416 spin_lock_irqsave(&h->offline_device_lock, flags); 8417 list_for_each_safe(this, tmp, &h->offline_device_list) { 8418 d = list_entry(this, struct offline_device_entry, 8419 offline_list); 8420 spin_unlock_irqrestore(&h->offline_device_lock, flags); 8421 if (!hpsa_volume_offline(h, d->scsi3addr)) { 8422 spin_lock_irqsave(&h->offline_device_lock, flags); 8423 list_del(&d->offline_list); 8424 spin_unlock_irqrestore(&h->offline_device_lock, flags); 8425 return 1; 8426 } 8427 spin_lock_irqsave(&h->offline_device_lock, flags); 8428 } 8429 spin_unlock_irqrestore(&h->offline_device_lock, flags); 8430 return 0; 8431 } 8432 8433 static int hpsa_luns_changed(struct ctlr_info *h) 8434 { 8435 int rc = 1; /* assume there are changes */ 8436 struct ReportLUNdata *logdev = NULL; 8437 8438 /* if we can't find out if lun data has changed, 8439 * assume that it has. 8440 */ 8441 8442 if (!h->lastlogicals) 8443 return rc; 8444 8445 logdev = kzalloc(sizeof(*logdev), GFP_KERNEL); 8446 if (!logdev) 8447 return rc; 8448 8449 if (hpsa_scsi_do_report_luns(h, 1, logdev, sizeof(*logdev), 0)) { 8450 dev_warn(&h->pdev->dev, 8451 "report luns failed, can't track lun changes.\n"); 8452 goto out; 8453 } 8454 if (memcmp(logdev, h->lastlogicals, sizeof(*logdev))) { 8455 dev_info(&h->pdev->dev, 8456 "Lun changes detected.\n"); 8457 memcpy(h->lastlogicals, logdev, sizeof(*logdev)); 8458 goto out; 8459 } else 8460 rc = 0; /* no changes detected. */ 8461 out: 8462 kfree(logdev); 8463 return rc; 8464 } 8465 8466 static void hpsa_perform_rescan(struct ctlr_info *h) 8467 { 8468 struct Scsi_Host *sh = NULL; 8469 unsigned long flags; 8470 8471 /* 8472 * Do the scan after the reset 8473 */ 8474 spin_lock_irqsave(&h->reset_lock, flags); 8475 if (h->reset_in_progress) { 8476 h->drv_req_rescan = 1; 8477 spin_unlock_irqrestore(&h->reset_lock, flags); 8478 return; 8479 } 8480 spin_unlock_irqrestore(&h->reset_lock, flags); 8481 8482 sh = scsi_host_get(h->scsi_host); 8483 if (sh != NULL) { 8484 hpsa_scan_start(sh); 8485 scsi_host_put(sh); 8486 h->drv_req_rescan = 0; 8487 } 8488 } 8489 8490 /* 8491 * watch for controller events 8492 */ 8493 static void hpsa_event_monitor_worker(struct work_struct *work) 8494 { 8495 struct ctlr_info *h = container_of(to_delayed_work(work), 8496 struct ctlr_info, event_monitor_work); 8497 unsigned long flags; 8498 8499 spin_lock_irqsave(&h->lock, flags); 8500 if (h->remove_in_progress) { 8501 spin_unlock_irqrestore(&h->lock, flags); 8502 return; 8503 } 8504 spin_unlock_irqrestore(&h->lock, flags); 8505 8506 if (hpsa_ctlr_needs_rescan(h)) { 8507 hpsa_ack_ctlr_events(h); 8508 hpsa_perform_rescan(h); 8509 } 8510 8511 spin_lock_irqsave(&h->lock, flags); 8512 if (!h->remove_in_progress) 8513 queue_delayed_work(h->monitor_ctlr_wq, &h->event_monitor_work, 8514 HPSA_EVENT_MONITOR_INTERVAL); 8515 spin_unlock_irqrestore(&h->lock, flags); 8516 } 8517 8518 static void hpsa_rescan_ctlr_worker(struct work_struct *work) 8519 { 8520 unsigned long flags; 8521 struct ctlr_info *h = container_of(to_delayed_work(work), 8522 struct ctlr_info, rescan_ctlr_work); 8523 8524 spin_lock_irqsave(&h->lock, flags); 8525 if (h->remove_in_progress) { 8526 spin_unlock_irqrestore(&h->lock, flags); 8527 return; 8528 } 8529 spin_unlock_irqrestore(&h->lock, flags); 8530 8531 if (h->drv_req_rescan || hpsa_offline_devices_ready(h)) { 8532 hpsa_perform_rescan(h); 8533 } else if (h->discovery_polling) { 8534 if (hpsa_luns_changed(h)) { 8535 dev_info(&h->pdev->dev, 8536 "driver discovery polling rescan.\n"); 8537 hpsa_perform_rescan(h); 8538 } 8539 } 8540 spin_lock_irqsave(&h->lock, flags); 8541 if (!h->remove_in_progress) 8542 queue_delayed_work(h->rescan_ctlr_wq, &h->rescan_ctlr_work, 8543 h->heartbeat_sample_interval); 8544 spin_unlock_irqrestore(&h->lock, flags); 8545 } 8546 8547 static void hpsa_monitor_ctlr_worker(struct work_struct *work) 8548 { 8549 unsigned long flags; 8550 struct ctlr_info *h = container_of(to_delayed_work(work), 8551 struct ctlr_info, monitor_ctlr_work); 8552 8553 detect_controller_lockup(h); 8554 if (lockup_detected(h)) 8555 return; 8556 8557 spin_lock_irqsave(&h->lock, flags); 8558 if (!h->remove_in_progress) 8559 queue_delayed_work(h->monitor_ctlr_wq, &h->monitor_ctlr_work, 8560 h->heartbeat_sample_interval); 8561 spin_unlock_irqrestore(&h->lock, flags); 8562 } 8563 8564 static struct workqueue_struct *hpsa_create_controller_wq(struct ctlr_info *h, 8565 char *name) 8566 { 8567 struct workqueue_struct *wq = NULL; 8568 8569 wq = alloc_ordered_workqueue("%s_%d_hpsa", 0, name, h->ctlr); 8570 if (!wq) 8571 dev_err(&h->pdev->dev, "failed to create %s workqueue\n", name); 8572 8573 return wq; 8574 } 8575 8576 static void hpda_free_ctlr_info(struct ctlr_info *h) 8577 { 8578 kfree(h->reply_map); 8579 kfree(h); 8580 } 8581 8582 static struct ctlr_info *hpda_alloc_ctlr_info(void) 8583 { 8584 struct ctlr_info *h; 8585 8586 h = kzalloc(sizeof(*h), GFP_KERNEL); 8587 if (!h) 8588 return NULL; 8589 8590 h->reply_map = kcalloc(nr_cpu_ids, sizeof(*h->reply_map), GFP_KERNEL); 8591 if (!h->reply_map) { 8592 kfree(h); 8593 return NULL; 8594 } 8595 return h; 8596 } 8597 8598 static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) 8599 { 8600 int dac, rc; 8601 struct ctlr_info *h; 8602 int try_soft_reset = 0; 8603 unsigned long flags; 8604 u32 board_id; 8605 8606 if (number_of_controllers == 0) 8607 printk(KERN_INFO DRIVER_NAME "\n"); 8608 8609 rc = hpsa_lookup_board_id(pdev, &board_id, NULL); 8610 if (rc < 0) { 8611 dev_warn(&pdev->dev, "Board ID not found\n"); 8612 return rc; 8613 } 8614 8615 rc = hpsa_init_reset_devices(pdev, board_id); 8616 if (rc) { 8617 if (rc != -ENOTSUPP) 8618 return rc; 8619 /* If the reset fails in a particular way (it has no way to do 8620 * a proper hard reset, so returns -ENOTSUPP) we can try to do 8621 * a soft reset once we get the controller configured up to the 8622 * point that it can accept a command. 8623 */ 8624 try_soft_reset = 1; 8625 rc = 0; 8626 } 8627 8628 reinit_after_soft_reset: 8629 8630 /* Command structures must be aligned on a 32-byte boundary because 8631 * the 5 lower bits of the address are used by the hardware. and by 8632 * the driver. See comments in hpsa.h for more info. 8633 */ 8634 BUILD_BUG_ON(sizeof(struct CommandList) % COMMANDLIST_ALIGNMENT); 8635 h = hpda_alloc_ctlr_info(); 8636 if (!h) { 8637 dev_err(&pdev->dev, "Failed to allocate controller head\n"); 8638 return -ENOMEM; 8639 } 8640 8641 h->pdev = pdev; 8642 8643 h->intr_mode = hpsa_simple_mode ? SIMPLE_MODE_INT : PERF_MODE_INT; 8644 INIT_LIST_HEAD(&h->offline_device_list); 8645 spin_lock_init(&h->lock); 8646 spin_lock_init(&h->offline_device_lock); 8647 spin_lock_init(&h->scan_lock); 8648 spin_lock_init(&h->reset_lock); 8649 atomic_set(&h->passthru_cmds_avail, HPSA_MAX_CONCURRENT_PASSTHRUS); 8650 8651 /* Allocate and clear per-cpu variable lockup_detected */ 8652 h->lockup_detected = alloc_percpu(u32); 8653 if (!h->lockup_detected) { 8654 dev_err(&h->pdev->dev, "Failed to allocate lockup detector\n"); 8655 rc = -ENOMEM; 8656 goto clean1; /* aer/h */ 8657 } 8658 set_lockup_detected_for_all_cpus(h, 0); 8659 8660 rc = hpsa_pci_init(h); 8661 if (rc) 8662 goto clean2; /* lu, aer/h */ 8663 8664 /* relies on h-> settings made by hpsa_pci_init, including 8665 * interrupt_mode h->intr */ 8666 rc = hpsa_scsi_host_alloc(h); 8667 if (rc) 8668 goto clean2_5; /* pci, lu, aer/h */ 8669 8670 sprintf(h->devname, HPSA "%d", h->scsi_host->host_no); 8671 h->ctlr = number_of_controllers; 8672 number_of_controllers++; 8673 8674 /* configure PCI DMA stuff */ 8675 rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)); 8676 if (rc == 0) { 8677 dac = 1; 8678 } else { 8679 rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); 8680 if (rc == 0) { 8681 dac = 0; 8682 } else { 8683 dev_err(&pdev->dev, "no suitable DMA available\n"); 8684 goto clean3; /* shost, pci, lu, aer/h */ 8685 } 8686 } 8687 8688 /* make sure the board interrupts are off */ 8689 h->access.set_intr_mask(h, HPSA_INTR_OFF); 8690 8691 rc = hpsa_request_irqs(h, do_hpsa_intr_msi, do_hpsa_intr_intx); 8692 if (rc) 8693 goto clean3; /* shost, pci, lu, aer/h */ 8694 rc = hpsa_alloc_cmd_pool(h); 8695 if (rc) 8696 goto clean4; /* irq, shost, pci, lu, aer/h */ 8697 rc = hpsa_alloc_sg_chain_blocks(h); 8698 if (rc) 8699 goto clean5; /* cmd, irq, shost, pci, lu, aer/h */ 8700 init_waitqueue_head(&h->scan_wait_queue); 8701 init_waitqueue_head(&h->event_sync_wait_queue); 8702 mutex_init(&h->reset_mutex); 8703 h->scan_finished = 1; /* no scan currently in progress */ 8704 h->scan_waiting = 0; 8705 8706 pci_set_drvdata(pdev, h); 8707 h->ndevices = 0; 8708 8709 spin_lock_init(&h->devlock); 8710 rc = hpsa_put_ctlr_into_performant_mode(h); 8711 if (rc) 8712 goto clean6; /* sg, cmd, irq, shost, pci, lu, aer/h */ 8713 8714 /* create the resubmit workqueue */ 8715 h->rescan_ctlr_wq = hpsa_create_controller_wq(h, "rescan"); 8716 if (!h->rescan_ctlr_wq) { 8717 rc = -ENOMEM; 8718 goto clean7; 8719 } 8720 8721 h->resubmit_wq = hpsa_create_controller_wq(h, "resubmit"); 8722 if (!h->resubmit_wq) { 8723 rc = -ENOMEM; 8724 goto clean7; /* aer/h */ 8725 } 8726 8727 h->monitor_ctlr_wq = hpsa_create_controller_wq(h, "monitor"); 8728 if (!h->monitor_ctlr_wq) { 8729 rc = -ENOMEM; 8730 goto clean7; 8731 } 8732 8733 /* 8734 * At this point, the controller is ready to take commands. 8735 * Now, if reset_devices and the hard reset didn't work, try 8736 * the soft reset and see if that works. 8737 */ 8738 if (try_soft_reset) { 8739 8740 /* This is kind of gross. We may or may not get a completion 8741 * from the soft reset command, and if we do, then the value 8742 * from the fifo may or may not be valid. So, we wait 10 secs 8743 * after the reset throwing away any completions we get during 8744 * that time. Unregister the interrupt handler and register 8745 * fake ones to scoop up any residual completions. 8746 */ 8747 spin_lock_irqsave(&h->lock, flags); 8748 h->access.set_intr_mask(h, HPSA_INTR_OFF); 8749 spin_unlock_irqrestore(&h->lock, flags); 8750 hpsa_free_irqs(h); 8751 rc = hpsa_request_irqs(h, hpsa_msix_discard_completions, 8752 hpsa_intx_discard_completions); 8753 if (rc) { 8754 dev_warn(&h->pdev->dev, 8755 "Failed to request_irq after soft reset.\n"); 8756 /* 8757 * cannot goto clean7 or free_irqs will be called 8758 * again. Instead, do its work 8759 */ 8760 hpsa_free_performant_mode(h); /* clean7 */ 8761 hpsa_free_sg_chain_blocks(h); /* clean6 */ 8762 hpsa_free_cmd_pool(h); /* clean5 */ 8763 /* 8764 * skip hpsa_free_irqs(h) clean4 since that 8765 * was just called before request_irqs failed 8766 */ 8767 goto clean3; 8768 } 8769 8770 rc = hpsa_kdump_soft_reset(h); 8771 if (rc) 8772 /* Neither hard nor soft reset worked, we're hosed. */ 8773 goto clean7; 8774 8775 dev_info(&h->pdev->dev, "Board READY.\n"); 8776 dev_info(&h->pdev->dev, 8777 "Waiting for stale completions to drain.\n"); 8778 h->access.set_intr_mask(h, HPSA_INTR_ON); 8779 msleep(10000); 8780 h->access.set_intr_mask(h, HPSA_INTR_OFF); 8781 8782 rc = controller_reset_failed(h->cfgtable); 8783 if (rc) 8784 dev_info(&h->pdev->dev, 8785 "Soft reset appears to have failed.\n"); 8786 8787 /* since the controller's reset, we have to go back and re-init 8788 * everything. Easiest to just forget what we've done and do it 8789 * all over again. 8790 */ 8791 hpsa_undo_allocations_after_kdump_soft_reset(h); 8792 try_soft_reset = 0; 8793 if (rc) 8794 /* don't goto clean, we already unallocated */ 8795 return -ENODEV; 8796 8797 goto reinit_after_soft_reset; 8798 } 8799 8800 /* Enable Accelerated IO path at driver layer */ 8801 h->acciopath_status = 1; 8802 /* Disable discovery polling.*/ 8803 h->discovery_polling = 0; 8804 8805 8806 /* Turn the interrupts on so we can service requests */ 8807 h->access.set_intr_mask(h, HPSA_INTR_ON); 8808 8809 hpsa_hba_inquiry(h); 8810 8811 h->lastlogicals = kzalloc(sizeof(*(h->lastlogicals)), GFP_KERNEL); 8812 if (!h->lastlogicals) 8813 dev_info(&h->pdev->dev, 8814 "Can't track change to report lun data\n"); 8815 8816 /* hook into SCSI subsystem */ 8817 rc = hpsa_scsi_add_host(h); 8818 if (rc) 8819 goto clean7; /* perf, sg, cmd, irq, shost, pci, lu, aer/h */ 8820 8821 /* Monitor the controller for firmware lockups */ 8822 h->heartbeat_sample_interval = HEARTBEAT_SAMPLE_INTERVAL; 8823 INIT_DELAYED_WORK(&h->monitor_ctlr_work, hpsa_monitor_ctlr_worker); 8824 schedule_delayed_work(&h->monitor_ctlr_work, 8825 h->heartbeat_sample_interval); 8826 INIT_DELAYED_WORK(&h->rescan_ctlr_work, hpsa_rescan_ctlr_worker); 8827 queue_delayed_work(h->rescan_ctlr_wq, &h->rescan_ctlr_work, 8828 h->heartbeat_sample_interval); 8829 INIT_DELAYED_WORK(&h->event_monitor_work, hpsa_event_monitor_worker); 8830 schedule_delayed_work(&h->event_monitor_work, 8831 HPSA_EVENT_MONITOR_INTERVAL); 8832 return 0; 8833 8834 clean7: /* perf, sg, cmd, irq, shost, pci, lu, aer/h */ 8835 hpsa_free_performant_mode(h); 8836 h->access.set_intr_mask(h, HPSA_INTR_OFF); 8837 clean6: /* sg, cmd, irq, pci, lockup, wq/aer/h */ 8838 hpsa_free_sg_chain_blocks(h); 8839 clean5: /* cmd, irq, shost, pci, lu, aer/h */ 8840 hpsa_free_cmd_pool(h); 8841 clean4: /* irq, shost, pci, lu, aer/h */ 8842 hpsa_free_irqs(h); 8843 clean3: /* shost, pci, lu, aer/h */ 8844 scsi_host_put(h->scsi_host); 8845 h->scsi_host = NULL; 8846 clean2_5: /* pci, lu, aer/h */ 8847 hpsa_free_pci_init(h); 8848 clean2: /* lu, aer/h */ 8849 if (h->lockup_detected) { 8850 free_percpu(h->lockup_detected); 8851 h->lockup_detected = NULL; 8852 } 8853 clean1: /* wq/aer/h */ 8854 if (h->resubmit_wq) { 8855 destroy_workqueue(h->resubmit_wq); 8856 h->resubmit_wq = NULL; 8857 } 8858 if (h->rescan_ctlr_wq) { 8859 destroy_workqueue(h->rescan_ctlr_wq); 8860 h->rescan_ctlr_wq = NULL; 8861 } 8862 if (h->monitor_ctlr_wq) { 8863 destroy_workqueue(h->monitor_ctlr_wq); 8864 h->monitor_ctlr_wq = NULL; 8865 } 8866 kfree(h); 8867 return rc; 8868 } 8869 8870 static void hpsa_flush_cache(struct ctlr_info *h) 8871 { 8872 char *flush_buf; 8873 struct CommandList *c; 8874 int rc; 8875 8876 if (unlikely(lockup_detected(h))) 8877 return; 8878 flush_buf = kzalloc(4, GFP_KERNEL); 8879 if (!flush_buf) 8880 return; 8881 8882 c = cmd_alloc(h); 8883 8884 if (fill_cmd(c, HPSA_CACHE_FLUSH, h, flush_buf, 4, 0, 8885 RAID_CTLR_LUNID, TYPE_CMD)) { 8886 goto out; 8887 } 8888 rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_TO_DEVICE, 8889 DEFAULT_TIMEOUT); 8890 if (rc) 8891 goto out; 8892 if (c->err_info->CommandStatus != 0) 8893 out: 8894 dev_warn(&h->pdev->dev, 8895 "error flushing cache on controller\n"); 8896 cmd_free(h, c); 8897 kfree(flush_buf); 8898 } 8899 8900 /* Make controller gather fresh report lun data each time we 8901 * send down a report luns request 8902 */ 8903 static void hpsa_disable_rld_caching(struct ctlr_info *h) 8904 { 8905 u32 *options; 8906 struct CommandList *c; 8907 int rc; 8908 8909 /* Don't bother trying to set diag options if locked up */ 8910 if (unlikely(h->lockup_detected)) 8911 return; 8912 8913 options = kzalloc(sizeof(*options), GFP_KERNEL); 8914 if (!options) 8915 return; 8916 8917 c = cmd_alloc(h); 8918 8919 /* first, get the current diag options settings */ 8920 if (fill_cmd(c, BMIC_SENSE_DIAG_OPTIONS, h, options, 4, 0, 8921 RAID_CTLR_LUNID, TYPE_CMD)) 8922 goto errout; 8923 8924 rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE, 8925 NO_TIMEOUT); 8926 if ((rc != 0) || (c->err_info->CommandStatus != 0)) 8927 goto errout; 8928 8929 /* Now, set the bit for disabling the RLD caching */ 8930 *options |= HPSA_DIAG_OPTS_DISABLE_RLD_CACHING; 8931 8932 if (fill_cmd(c, BMIC_SET_DIAG_OPTIONS, h, options, 4, 0, 8933 RAID_CTLR_LUNID, TYPE_CMD)) 8934 goto errout; 8935 8936 rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_TO_DEVICE, 8937 NO_TIMEOUT); 8938 if ((rc != 0) || (c->err_info->CommandStatus != 0)) 8939 goto errout; 8940 8941 /* Now verify that it got set: */ 8942 if (fill_cmd(c, BMIC_SENSE_DIAG_OPTIONS, h, options, 4, 0, 8943 RAID_CTLR_LUNID, TYPE_CMD)) 8944 goto errout; 8945 8946 rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE, 8947 NO_TIMEOUT); 8948 if ((rc != 0) || (c->err_info->CommandStatus != 0)) 8949 goto errout; 8950 8951 if (*options & HPSA_DIAG_OPTS_DISABLE_RLD_CACHING) 8952 goto out; 8953 8954 errout: 8955 dev_err(&h->pdev->dev, 8956 "Error: failed to disable report lun data caching.\n"); 8957 out: 8958 cmd_free(h, c); 8959 kfree(options); 8960 } 8961 8962 static void __hpsa_shutdown(struct pci_dev *pdev) 8963 { 8964 struct ctlr_info *h; 8965 8966 h = pci_get_drvdata(pdev); 8967 /* Turn board interrupts off and send the flush cache command 8968 * sendcmd will turn off interrupt, and send the flush... 8969 * To write all data in the battery backed cache to disks 8970 */ 8971 hpsa_flush_cache(h); 8972 h->access.set_intr_mask(h, HPSA_INTR_OFF); 8973 hpsa_free_irqs(h); /* init_one 4 */ 8974 hpsa_disable_interrupt_mode(h); /* pci_init 2 */ 8975 } 8976 8977 static void hpsa_shutdown(struct pci_dev *pdev) 8978 { 8979 __hpsa_shutdown(pdev); 8980 pci_disable_device(pdev); 8981 } 8982 8983 static void hpsa_free_device_info(struct ctlr_info *h) 8984 { 8985 int i; 8986 8987 for (i = 0; i < h->ndevices; i++) { 8988 kfree(h->dev[i]); 8989 h->dev[i] = NULL; 8990 } 8991 } 8992 8993 static void hpsa_remove_one(struct pci_dev *pdev) 8994 { 8995 struct ctlr_info *h; 8996 unsigned long flags; 8997 8998 if (pci_get_drvdata(pdev) == NULL) { 8999 dev_err(&pdev->dev, "unable to remove device\n"); 9000 return; 9001 } 9002 h = pci_get_drvdata(pdev); 9003 9004 /* Get rid of any controller monitoring work items */ 9005 spin_lock_irqsave(&h->lock, flags); 9006 h->remove_in_progress = 1; 9007 spin_unlock_irqrestore(&h->lock, flags); 9008 cancel_delayed_work_sync(&h->monitor_ctlr_work); 9009 cancel_delayed_work_sync(&h->rescan_ctlr_work); 9010 cancel_delayed_work_sync(&h->event_monitor_work); 9011 destroy_workqueue(h->rescan_ctlr_wq); 9012 destroy_workqueue(h->resubmit_wq); 9013 destroy_workqueue(h->monitor_ctlr_wq); 9014 9015 hpsa_delete_sas_host(h); 9016 9017 /* 9018 * Call before disabling interrupts. 9019 * scsi_remove_host can trigger I/O operations especially 9020 * when multipath is enabled. There can be SYNCHRONIZE CACHE 9021 * operations which cannot complete and will hang the system. 9022 */ 9023 if (h->scsi_host) 9024 scsi_remove_host(h->scsi_host); /* init_one 8 */ 9025 /* includes hpsa_free_irqs - init_one 4 */ 9026 /* includes hpsa_disable_interrupt_mode - pci_init 2 */ 9027 __hpsa_shutdown(pdev); 9028 9029 hpsa_free_device_info(h); /* scan */ 9030 9031 kfree(h->hba_inquiry_data); /* init_one 10 */ 9032 h->hba_inquiry_data = NULL; /* init_one 10 */ 9033 hpsa_free_ioaccel2_sg_chain_blocks(h); 9034 hpsa_free_performant_mode(h); /* init_one 7 */ 9035 hpsa_free_sg_chain_blocks(h); /* init_one 6 */ 9036 hpsa_free_cmd_pool(h); /* init_one 5 */ 9037 kfree(h->lastlogicals); 9038 9039 /* hpsa_free_irqs already called via hpsa_shutdown init_one 4 */ 9040 9041 scsi_host_put(h->scsi_host); /* init_one 3 */ 9042 h->scsi_host = NULL; /* init_one 3 */ 9043 9044 /* includes hpsa_disable_interrupt_mode - pci_init 2 */ 9045 hpsa_free_pci_init(h); /* init_one 2.5 */ 9046 9047 free_percpu(h->lockup_detected); /* init_one 2 */ 9048 h->lockup_detected = NULL; /* init_one 2 */ 9049 /* (void) pci_disable_pcie_error_reporting(pdev); */ /* init_one 1 */ 9050 9051 hpda_free_ctlr_info(h); /* init_one 1 */ 9052 } 9053 9054 static int hpsa_suspend(__attribute__((unused)) struct pci_dev *pdev, 9055 __attribute__((unused)) pm_message_t state) 9056 { 9057 return -ENOSYS; 9058 } 9059 9060 static int hpsa_resume(__attribute__((unused)) struct pci_dev *pdev) 9061 { 9062 return -ENOSYS; 9063 } 9064 9065 static struct pci_driver hpsa_pci_driver = { 9066 .name = HPSA, 9067 .probe = hpsa_init_one, 9068 .remove = hpsa_remove_one, 9069 .id_table = hpsa_pci_device_id, /* id_table */ 9070 .shutdown = hpsa_shutdown, 9071 .suspend = hpsa_suspend, 9072 .resume = hpsa_resume, 9073 }; 9074 9075 /* Fill in bucket_map[], given nsgs (the max number of 9076 * scatter gather elements supported) and bucket[], 9077 * which is an array of 8 integers. The bucket[] array 9078 * contains 8 different DMA transfer sizes (in 16 9079 * byte increments) which the controller uses to fetch 9080 * commands. This function fills in bucket_map[], which 9081 * maps a given number of scatter gather elements to one of 9082 * the 8 DMA transfer sizes. The point of it is to allow the 9083 * controller to only do as much DMA as needed to fetch the 9084 * command, with the DMA transfer size encoded in the lower 9085 * bits of the command address. 9086 */ 9087 static void calc_bucket_map(int bucket[], int num_buckets, 9088 int nsgs, int min_blocks, u32 *bucket_map) 9089 { 9090 int i, j, b, size; 9091 9092 /* Note, bucket_map must have nsgs+1 entries. */ 9093 for (i = 0; i <= nsgs; i++) { 9094 /* Compute size of a command with i SG entries */ 9095 size = i + min_blocks; 9096 b = num_buckets; /* Assume the biggest bucket */ 9097 /* Find the bucket that is just big enough */ 9098 for (j = 0; j < num_buckets; j++) { 9099 if (bucket[j] >= size) { 9100 b = j; 9101 break; 9102 } 9103 } 9104 /* for a command with i SG entries, use bucket b. */ 9105 bucket_map[i] = b; 9106 } 9107 } 9108 9109 /* 9110 * return -ENODEV on err, 0 on success (or no action) 9111 * allocates numerous items that must be freed later 9112 */ 9113 static int hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support) 9114 { 9115 int i; 9116 unsigned long register_value; 9117 unsigned long transMethod = CFGTBL_Trans_Performant | 9118 (trans_support & CFGTBL_Trans_use_short_tags) | 9119 CFGTBL_Trans_enable_directed_msix | 9120 (trans_support & (CFGTBL_Trans_io_accel1 | 9121 CFGTBL_Trans_io_accel2)); 9122 struct access_method access = SA5_performant_access; 9123 9124 /* This is a bit complicated. There are 8 registers on 9125 * the controller which we write to to tell it 8 different 9126 * sizes of commands which there may be. It's a way of 9127 * reducing the DMA done to fetch each command. Encoded into 9128 * each command's tag are 3 bits which communicate to the controller 9129 * which of the eight sizes that command fits within. The size of 9130 * each command depends on how many scatter gather entries there are. 9131 * Each SG entry requires 16 bytes. The eight registers are programmed 9132 * with the number of 16-byte blocks a command of that size requires. 9133 * The smallest command possible requires 5 such 16 byte blocks. 9134 * the largest command possible requires SG_ENTRIES_IN_CMD + 4 16-byte 9135 * blocks. Note, this only extends to the SG entries contained 9136 * within the command block, and does not extend to chained blocks 9137 * of SG elements. bft[] contains the eight values we write to 9138 * the registers. They are not evenly distributed, but have more 9139 * sizes for small commands, and fewer sizes for larger commands. 9140 */ 9141 int bft[8] = {5, 6, 8, 10, 12, 20, 28, SG_ENTRIES_IN_CMD + 4}; 9142 #define MIN_IOACCEL2_BFT_ENTRY 5 9143 #define HPSA_IOACCEL2_HEADER_SZ 4 9144 int bft2[16] = {MIN_IOACCEL2_BFT_ENTRY, 6, 7, 8, 9, 10, 11, 12, 9145 13, 14, 15, 16, 17, 18, 19, 9146 HPSA_IOACCEL2_HEADER_SZ + IOACCEL2_MAXSGENTRIES}; 9147 BUILD_BUG_ON(ARRAY_SIZE(bft2) != 16); 9148 BUILD_BUG_ON(ARRAY_SIZE(bft) != 8); 9149 BUILD_BUG_ON(offsetof(struct io_accel2_cmd, sg) > 9150 16 * MIN_IOACCEL2_BFT_ENTRY); 9151 BUILD_BUG_ON(sizeof(struct ioaccel2_sg_element) != 16); 9152 BUILD_BUG_ON(28 > SG_ENTRIES_IN_CMD + 4); 9153 /* 5 = 1 s/g entry or 4k 9154 * 6 = 2 s/g entry or 8k 9155 * 8 = 4 s/g entry or 16k 9156 * 10 = 6 s/g entry or 24k 9157 */ 9158 9159 /* If the controller supports either ioaccel method then 9160 * we can also use the RAID stack submit path that does not 9161 * perform the superfluous readl() after each command submission. 9162 */ 9163 if (trans_support & (CFGTBL_Trans_io_accel1 | CFGTBL_Trans_io_accel2)) 9164 access = SA5_performant_access_no_read; 9165 9166 /* Controller spec: zero out this buffer. */ 9167 for (i = 0; i < h->nreply_queues; i++) 9168 memset(h->reply_queue[i].head, 0, h->reply_queue_size); 9169 9170 bft[7] = SG_ENTRIES_IN_CMD + 4; 9171 calc_bucket_map(bft, ARRAY_SIZE(bft), 9172 SG_ENTRIES_IN_CMD, 4, h->blockFetchTable); 9173 for (i = 0; i < 8; i++) 9174 writel(bft[i], &h->transtable->BlockFetch[i]); 9175 9176 /* size of controller ring buffer */ 9177 writel(h->max_commands, &h->transtable->RepQSize); 9178 writel(h->nreply_queues, &h->transtable->RepQCount); 9179 writel(0, &h->transtable->RepQCtrAddrLow32); 9180 writel(0, &h->transtable->RepQCtrAddrHigh32); 9181 9182 for (i = 0; i < h->nreply_queues; i++) { 9183 writel(0, &h->transtable->RepQAddr[i].upper); 9184 writel(h->reply_queue[i].busaddr, 9185 &h->transtable->RepQAddr[i].lower); 9186 } 9187 9188 writel(0, &h->cfgtable->HostWrite.command_pool_addr_hi); 9189 writel(transMethod, &(h->cfgtable->HostWrite.TransportRequest)); 9190 /* 9191 * enable outbound interrupt coalescing in accelerator mode; 9192 */ 9193 if (trans_support & CFGTBL_Trans_io_accel1) { 9194 access = SA5_ioaccel_mode1_access; 9195 writel(10, &h->cfgtable->HostWrite.CoalIntDelay); 9196 writel(4, &h->cfgtable->HostWrite.CoalIntCount); 9197 } else 9198 if (trans_support & CFGTBL_Trans_io_accel2) 9199 access = SA5_ioaccel_mode2_access; 9200 writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL); 9201 if (hpsa_wait_for_mode_change_ack(h)) { 9202 dev_err(&h->pdev->dev, 9203 "performant mode problem - doorbell timeout\n"); 9204 return -ENODEV; 9205 } 9206 register_value = readl(&(h->cfgtable->TransportActive)); 9207 if (!(register_value & CFGTBL_Trans_Performant)) { 9208 dev_err(&h->pdev->dev, 9209 "performant mode problem - transport not active\n"); 9210 return -ENODEV; 9211 } 9212 /* Change the access methods to the performant access methods */ 9213 h->access = access; 9214 h->transMethod = transMethod; 9215 9216 if (!((trans_support & CFGTBL_Trans_io_accel1) || 9217 (trans_support & CFGTBL_Trans_io_accel2))) 9218 return 0; 9219 9220 if (trans_support & CFGTBL_Trans_io_accel1) { 9221 /* Set up I/O accelerator mode */ 9222 for (i = 0; i < h->nreply_queues; i++) { 9223 writel(i, h->vaddr + IOACCEL_MODE1_REPLY_QUEUE_INDEX); 9224 h->reply_queue[i].current_entry = 9225 readl(h->vaddr + IOACCEL_MODE1_PRODUCER_INDEX); 9226 } 9227 bft[7] = h->ioaccel_maxsg + 8; 9228 calc_bucket_map(bft, ARRAY_SIZE(bft), h->ioaccel_maxsg, 8, 9229 h->ioaccel1_blockFetchTable); 9230 9231 /* initialize all reply queue entries to unused */ 9232 for (i = 0; i < h->nreply_queues; i++) 9233 memset(h->reply_queue[i].head, 9234 (u8) IOACCEL_MODE1_REPLY_UNUSED, 9235 h->reply_queue_size); 9236 9237 /* set all the constant fields in the accelerator command 9238 * frames once at init time to save CPU cycles later. 9239 */ 9240 for (i = 0; i < h->nr_cmds; i++) { 9241 struct io_accel1_cmd *cp = &h->ioaccel_cmd_pool[i]; 9242 9243 cp->function = IOACCEL1_FUNCTION_SCSIIO; 9244 cp->err_info = (u32) (h->errinfo_pool_dhandle + 9245 (i * sizeof(struct ErrorInfo))); 9246 cp->err_info_len = sizeof(struct ErrorInfo); 9247 cp->sgl_offset = IOACCEL1_SGLOFFSET; 9248 cp->host_context_flags = 9249 cpu_to_le16(IOACCEL1_HCFLAGS_CISS_FORMAT); 9250 cp->timeout_sec = 0; 9251 cp->ReplyQueue = 0; 9252 cp->tag = 9253 cpu_to_le64((i << DIRECT_LOOKUP_SHIFT)); 9254 cp->host_addr = 9255 cpu_to_le64(h->ioaccel_cmd_pool_dhandle + 9256 (i * sizeof(struct io_accel1_cmd))); 9257 } 9258 } else if (trans_support & CFGTBL_Trans_io_accel2) { 9259 u64 cfg_offset, cfg_base_addr_index; 9260 u32 bft2_offset, cfg_base_addr; 9261 int rc; 9262 9263 rc = hpsa_find_cfg_addrs(h->pdev, h->vaddr, &cfg_base_addr, 9264 &cfg_base_addr_index, &cfg_offset); 9265 BUILD_BUG_ON(offsetof(struct io_accel2_cmd, sg) != 64); 9266 bft2[15] = h->ioaccel_maxsg + HPSA_IOACCEL2_HEADER_SZ; 9267 calc_bucket_map(bft2, ARRAY_SIZE(bft2), h->ioaccel_maxsg, 9268 4, h->ioaccel2_blockFetchTable); 9269 bft2_offset = readl(&h->cfgtable->io_accel_request_size_offset); 9270 BUILD_BUG_ON(offsetof(struct CfgTable, 9271 io_accel_request_size_offset) != 0xb8); 9272 h->ioaccel2_bft2_regs = 9273 remap_pci_mem(pci_resource_start(h->pdev, 9274 cfg_base_addr_index) + 9275 cfg_offset + bft2_offset, 9276 ARRAY_SIZE(bft2) * 9277 sizeof(*h->ioaccel2_bft2_regs)); 9278 for (i = 0; i < ARRAY_SIZE(bft2); i++) 9279 writel(bft2[i], &h->ioaccel2_bft2_regs[i]); 9280 } 9281 writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL); 9282 if (hpsa_wait_for_mode_change_ack(h)) { 9283 dev_err(&h->pdev->dev, 9284 "performant mode problem - enabling ioaccel mode\n"); 9285 return -ENODEV; 9286 } 9287 return 0; 9288 } 9289 9290 /* Free ioaccel1 mode command blocks and block fetch table */ 9291 static void hpsa_free_ioaccel1_cmd_and_bft(struct ctlr_info *h) 9292 { 9293 if (h->ioaccel_cmd_pool) { 9294 pci_free_consistent(h->pdev, 9295 h->nr_cmds * sizeof(*h->ioaccel_cmd_pool), 9296 h->ioaccel_cmd_pool, 9297 h->ioaccel_cmd_pool_dhandle); 9298 h->ioaccel_cmd_pool = NULL; 9299 h->ioaccel_cmd_pool_dhandle = 0; 9300 } 9301 kfree(h->ioaccel1_blockFetchTable); 9302 h->ioaccel1_blockFetchTable = NULL; 9303 } 9304 9305 /* Allocate ioaccel1 mode command blocks and block fetch table */ 9306 static int hpsa_alloc_ioaccel1_cmd_and_bft(struct ctlr_info *h) 9307 { 9308 h->ioaccel_maxsg = 9309 readl(&(h->cfgtable->io_accel_max_embedded_sg_count)); 9310 if (h->ioaccel_maxsg > IOACCEL1_MAXSGENTRIES) 9311 h->ioaccel_maxsg = IOACCEL1_MAXSGENTRIES; 9312 9313 /* Command structures must be aligned on a 128-byte boundary 9314 * because the 7 lower bits of the address are used by the 9315 * hardware. 9316 */ 9317 BUILD_BUG_ON(sizeof(struct io_accel1_cmd) % 9318 IOACCEL1_COMMANDLIST_ALIGNMENT); 9319 h->ioaccel_cmd_pool = 9320 dma_alloc_coherent(&h->pdev->dev, 9321 h->nr_cmds * sizeof(*h->ioaccel_cmd_pool), 9322 &h->ioaccel_cmd_pool_dhandle, GFP_KERNEL); 9323 9324 h->ioaccel1_blockFetchTable = 9325 kmalloc(((h->ioaccel_maxsg + 1) * 9326 sizeof(u32)), GFP_KERNEL); 9327 9328 if ((h->ioaccel_cmd_pool == NULL) || 9329 (h->ioaccel1_blockFetchTable == NULL)) 9330 goto clean_up; 9331 9332 memset(h->ioaccel_cmd_pool, 0, 9333 h->nr_cmds * sizeof(*h->ioaccel_cmd_pool)); 9334 return 0; 9335 9336 clean_up: 9337 hpsa_free_ioaccel1_cmd_and_bft(h); 9338 return -ENOMEM; 9339 } 9340 9341 /* Free ioaccel2 mode command blocks and block fetch table */ 9342 static void hpsa_free_ioaccel2_cmd_and_bft(struct ctlr_info *h) 9343 { 9344 hpsa_free_ioaccel2_sg_chain_blocks(h); 9345 9346 if (h->ioaccel2_cmd_pool) { 9347 pci_free_consistent(h->pdev, 9348 h->nr_cmds * sizeof(*h->ioaccel2_cmd_pool), 9349 h->ioaccel2_cmd_pool, 9350 h->ioaccel2_cmd_pool_dhandle); 9351 h->ioaccel2_cmd_pool = NULL; 9352 h->ioaccel2_cmd_pool_dhandle = 0; 9353 } 9354 kfree(h->ioaccel2_blockFetchTable); 9355 h->ioaccel2_blockFetchTable = NULL; 9356 } 9357 9358 /* Allocate ioaccel2 mode command blocks and block fetch table */ 9359 static int hpsa_alloc_ioaccel2_cmd_and_bft(struct ctlr_info *h) 9360 { 9361 int rc; 9362 9363 /* Allocate ioaccel2 mode command blocks and block fetch table */ 9364 9365 h->ioaccel_maxsg = 9366 readl(&(h->cfgtable->io_accel_max_embedded_sg_count)); 9367 if (h->ioaccel_maxsg > IOACCEL2_MAXSGENTRIES) 9368 h->ioaccel_maxsg = IOACCEL2_MAXSGENTRIES; 9369 9370 BUILD_BUG_ON(sizeof(struct io_accel2_cmd) % 9371 IOACCEL2_COMMANDLIST_ALIGNMENT); 9372 h->ioaccel2_cmd_pool = 9373 dma_alloc_coherent(&h->pdev->dev, 9374 h->nr_cmds * sizeof(*h->ioaccel2_cmd_pool), 9375 &h->ioaccel2_cmd_pool_dhandle, GFP_KERNEL); 9376 9377 h->ioaccel2_blockFetchTable = 9378 kmalloc(((h->ioaccel_maxsg + 1) * 9379 sizeof(u32)), GFP_KERNEL); 9380 9381 if ((h->ioaccel2_cmd_pool == NULL) || 9382 (h->ioaccel2_blockFetchTable == NULL)) { 9383 rc = -ENOMEM; 9384 goto clean_up; 9385 } 9386 9387 rc = hpsa_allocate_ioaccel2_sg_chain_blocks(h); 9388 if (rc) 9389 goto clean_up; 9390 9391 memset(h->ioaccel2_cmd_pool, 0, 9392 h->nr_cmds * sizeof(*h->ioaccel2_cmd_pool)); 9393 return 0; 9394 9395 clean_up: 9396 hpsa_free_ioaccel2_cmd_and_bft(h); 9397 return rc; 9398 } 9399 9400 /* Free items allocated by hpsa_put_ctlr_into_performant_mode */ 9401 static void hpsa_free_performant_mode(struct ctlr_info *h) 9402 { 9403 kfree(h->blockFetchTable); 9404 h->blockFetchTable = NULL; 9405 hpsa_free_reply_queues(h); 9406 hpsa_free_ioaccel1_cmd_and_bft(h); 9407 hpsa_free_ioaccel2_cmd_and_bft(h); 9408 } 9409 9410 /* return -ENODEV on error, 0 on success (or no action) 9411 * allocates numerous items that must be freed later 9412 */ 9413 static int hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h) 9414 { 9415 u32 trans_support; 9416 unsigned long transMethod = CFGTBL_Trans_Performant | 9417 CFGTBL_Trans_use_short_tags; 9418 int i, rc; 9419 9420 if (hpsa_simple_mode) 9421 return 0; 9422 9423 trans_support = readl(&(h->cfgtable->TransportSupport)); 9424 if (!(trans_support & PERFORMANT_MODE)) 9425 return 0; 9426 9427 /* Check for I/O accelerator mode support */ 9428 if (trans_support & CFGTBL_Trans_io_accel1) { 9429 transMethod |= CFGTBL_Trans_io_accel1 | 9430 CFGTBL_Trans_enable_directed_msix; 9431 rc = hpsa_alloc_ioaccel1_cmd_and_bft(h); 9432 if (rc) 9433 return rc; 9434 } else if (trans_support & CFGTBL_Trans_io_accel2) { 9435 transMethod |= CFGTBL_Trans_io_accel2 | 9436 CFGTBL_Trans_enable_directed_msix; 9437 rc = hpsa_alloc_ioaccel2_cmd_and_bft(h); 9438 if (rc) 9439 return rc; 9440 } 9441 9442 h->nreply_queues = h->msix_vectors > 0 ? h->msix_vectors : 1; 9443 hpsa_get_max_perf_mode_cmds(h); 9444 /* Performant mode ring buffer and supporting data structures */ 9445 h->reply_queue_size = h->max_commands * sizeof(u64); 9446 9447 for (i = 0; i < h->nreply_queues; i++) { 9448 h->reply_queue[i].head = dma_alloc_coherent(&h->pdev->dev, 9449 h->reply_queue_size, 9450 &h->reply_queue[i].busaddr, 9451 GFP_KERNEL); 9452 if (!h->reply_queue[i].head) { 9453 rc = -ENOMEM; 9454 goto clean1; /* rq, ioaccel */ 9455 } 9456 h->reply_queue[i].size = h->max_commands; 9457 h->reply_queue[i].wraparound = 1; /* spec: init to 1 */ 9458 h->reply_queue[i].current_entry = 0; 9459 } 9460 9461 /* Need a block fetch table for performant mode */ 9462 h->blockFetchTable = kmalloc(((SG_ENTRIES_IN_CMD + 1) * 9463 sizeof(u32)), GFP_KERNEL); 9464 if (!h->blockFetchTable) { 9465 rc = -ENOMEM; 9466 goto clean1; /* rq, ioaccel */ 9467 } 9468 9469 rc = hpsa_enter_performant_mode(h, trans_support); 9470 if (rc) 9471 goto clean2; /* bft, rq, ioaccel */ 9472 return 0; 9473 9474 clean2: /* bft, rq, ioaccel */ 9475 kfree(h->blockFetchTable); 9476 h->blockFetchTable = NULL; 9477 clean1: /* rq, ioaccel */ 9478 hpsa_free_reply_queues(h); 9479 hpsa_free_ioaccel1_cmd_and_bft(h); 9480 hpsa_free_ioaccel2_cmd_and_bft(h); 9481 return rc; 9482 } 9483 9484 static int is_accelerated_cmd(struct CommandList *c) 9485 { 9486 return c->cmd_type == CMD_IOACCEL1 || c->cmd_type == CMD_IOACCEL2; 9487 } 9488 9489 static void hpsa_drain_accel_commands(struct ctlr_info *h) 9490 { 9491 struct CommandList *c = NULL; 9492 int i, accel_cmds_out; 9493 int refcount; 9494 9495 do { /* wait for all outstanding ioaccel commands to drain out */ 9496 accel_cmds_out = 0; 9497 for (i = 0; i < h->nr_cmds; i++) { 9498 c = h->cmd_pool + i; 9499 refcount = atomic_inc_return(&c->refcount); 9500 if (refcount > 1) /* Command is allocated */ 9501 accel_cmds_out += is_accelerated_cmd(c); 9502 cmd_free(h, c); 9503 } 9504 if (accel_cmds_out <= 0) 9505 break; 9506 msleep(100); 9507 } while (1); 9508 } 9509 9510 static struct hpsa_sas_phy *hpsa_alloc_sas_phy( 9511 struct hpsa_sas_port *hpsa_sas_port) 9512 { 9513 struct hpsa_sas_phy *hpsa_sas_phy; 9514 struct sas_phy *phy; 9515 9516 hpsa_sas_phy = kzalloc(sizeof(*hpsa_sas_phy), GFP_KERNEL); 9517 if (!hpsa_sas_phy) 9518 return NULL; 9519 9520 phy = sas_phy_alloc(hpsa_sas_port->parent_node->parent_dev, 9521 hpsa_sas_port->next_phy_index); 9522 if (!phy) { 9523 kfree(hpsa_sas_phy); 9524 return NULL; 9525 } 9526 9527 hpsa_sas_port->next_phy_index++; 9528 hpsa_sas_phy->phy = phy; 9529 hpsa_sas_phy->parent_port = hpsa_sas_port; 9530 9531 return hpsa_sas_phy; 9532 } 9533 9534 static void hpsa_free_sas_phy(struct hpsa_sas_phy *hpsa_sas_phy) 9535 { 9536 struct sas_phy *phy = hpsa_sas_phy->phy; 9537 9538 sas_port_delete_phy(hpsa_sas_phy->parent_port->port, phy); 9539 if (hpsa_sas_phy->added_to_port) 9540 list_del(&hpsa_sas_phy->phy_list_entry); 9541 sas_phy_delete(phy); 9542 kfree(hpsa_sas_phy); 9543 } 9544 9545 static int hpsa_sas_port_add_phy(struct hpsa_sas_phy *hpsa_sas_phy) 9546 { 9547 int rc; 9548 struct hpsa_sas_port *hpsa_sas_port; 9549 struct sas_phy *phy; 9550 struct sas_identify *identify; 9551 9552 hpsa_sas_port = hpsa_sas_phy->parent_port; 9553 phy = hpsa_sas_phy->phy; 9554 9555 identify = &phy->identify; 9556 memset(identify, 0, sizeof(*identify)); 9557 identify->sas_address = hpsa_sas_port->sas_address; 9558 identify->device_type = SAS_END_DEVICE; 9559 identify->initiator_port_protocols = SAS_PROTOCOL_STP; 9560 identify->target_port_protocols = SAS_PROTOCOL_STP; 9561 phy->minimum_linkrate_hw = SAS_LINK_RATE_UNKNOWN; 9562 phy->maximum_linkrate_hw = SAS_LINK_RATE_UNKNOWN; 9563 phy->minimum_linkrate = SAS_LINK_RATE_UNKNOWN; 9564 phy->maximum_linkrate = SAS_LINK_RATE_UNKNOWN; 9565 phy->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN; 9566 9567 rc = sas_phy_add(hpsa_sas_phy->phy); 9568 if (rc) 9569 return rc; 9570 9571 sas_port_add_phy(hpsa_sas_port->port, hpsa_sas_phy->phy); 9572 list_add_tail(&hpsa_sas_phy->phy_list_entry, 9573 &hpsa_sas_port->phy_list_head); 9574 hpsa_sas_phy->added_to_port = true; 9575 9576 return 0; 9577 } 9578 9579 static int 9580 hpsa_sas_port_add_rphy(struct hpsa_sas_port *hpsa_sas_port, 9581 struct sas_rphy *rphy) 9582 { 9583 struct sas_identify *identify; 9584 9585 identify = &rphy->identify; 9586 identify->sas_address = hpsa_sas_port->sas_address; 9587 identify->initiator_port_protocols = SAS_PROTOCOL_STP; 9588 identify->target_port_protocols = SAS_PROTOCOL_STP; 9589 9590 return sas_rphy_add(rphy); 9591 } 9592 9593 static struct hpsa_sas_port 9594 *hpsa_alloc_sas_port(struct hpsa_sas_node *hpsa_sas_node, 9595 u64 sas_address) 9596 { 9597 int rc; 9598 struct hpsa_sas_port *hpsa_sas_port; 9599 struct sas_port *port; 9600 9601 hpsa_sas_port = kzalloc(sizeof(*hpsa_sas_port), GFP_KERNEL); 9602 if (!hpsa_sas_port) 9603 return NULL; 9604 9605 INIT_LIST_HEAD(&hpsa_sas_port->phy_list_head); 9606 hpsa_sas_port->parent_node = hpsa_sas_node; 9607 9608 port = sas_port_alloc_num(hpsa_sas_node->parent_dev); 9609 if (!port) 9610 goto free_hpsa_port; 9611 9612 rc = sas_port_add(port); 9613 if (rc) 9614 goto free_sas_port; 9615 9616 hpsa_sas_port->port = port; 9617 hpsa_sas_port->sas_address = sas_address; 9618 list_add_tail(&hpsa_sas_port->port_list_entry, 9619 &hpsa_sas_node->port_list_head); 9620 9621 return hpsa_sas_port; 9622 9623 free_sas_port: 9624 sas_port_free(port); 9625 free_hpsa_port: 9626 kfree(hpsa_sas_port); 9627 9628 return NULL; 9629 } 9630 9631 static void hpsa_free_sas_port(struct hpsa_sas_port *hpsa_sas_port) 9632 { 9633 struct hpsa_sas_phy *hpsa_sas_phy; 9634 struct hpsa_sas_phy *next; 9635 9636 list_for_each_entry_safe(hpsa_sas_phy, next, 9637 &hpsa_sas_port->phy_list_head, phy_list_entry) 9638 hpsa_free_sas_phy(hpsa_sas_phy); 9639 9640 sas_port_delete(hpsa_sas_port->port); 9641 list_del(&hpsa_sas_port->port_list_entry); 9642 kfree(hpsa_sas_port); 9643 } 9644 9645 static struct hpsa_sas_node *hpsa_alloc_sas_node(struct device *parent_dev) 9646 { 9647 struct hpsa_sas_node *hpsa_sas_node; 9648 9649 hpsa_sas_node = kzalloc(sizeof(*hpsa_sas_node), GFP_KERNEL); 9650 if (hpsa_sas_node) { 9651 hpsa_sas_node->parent_dev = parent_dev; 9652 INIT_LIST_HEAD(&hpsa_sas_node->port_list_head); 9653 } 9654 9655 return hpsa_sas_node; 9656 } 9657 9658 static void hpsa_free_sas_node(struct hpsa_sas_node *hpsa_sas_node) 9659 { 9660 struct hpsa_sas_port *hpsa_sas_port; 9661 struct hpsa_sas_port *next; 9662 9663 if (!hpsa_sas_node) 9664 return; 9665 9666 list_for_each_entry_safe(hpsa_sas_port, next, 9667 &hpsa_sas_node->port_list_head, port_list_entry) 9668 hpsa_free_sas_port(hpsa_sas_port); 9669 9670 kfree(hpsa_sas_node); 9671 } 9672 9673 static struct hpsa_scsi_dev_t 9674 *hpsa_find_device_by_sas_rphy(struct ctlr_info *h, 9675 struct sas_rphy *rphy) 9676 { 9677 int i; 9678 struct hpsa_scsi_dev_t *device; 9679 9680 for (i = 0; i < h->ndevices; i++) { 9681 device = h->dev[i]; 9682 if (!device->sas_port) 9683 continue; 9684 if (device->sas_port->rphy == rphy) 9685 return device; 9686 } 9687 9688 return NULL; 9689 } 9690 9691 static int hpsa_add_sas_host(struct ctlr_info *h) 9692 { 9693 int rc; 9694 struct device *parent_dev; 9695 struct hpsa_sas_node *hpsa_sas_node; 9696 struct hpsa_sas_port *hpsa_sas_port; 9697 struct hpsa_sas_phy *hpsa_sas_phy; 9698 9699 parent_dev = &h->scsi_host->shost_dev; 9700 9701 hpsa_sas_node = hpsa_alloc_sas_node(parent_dev); 9702 if (!hpsa_sas_node) 9703 return -ENOMEM; 9704 9705 hpsa_sas_port = hpsa_alloc_sas_port(hpsa_sas_node, h->sas_address); 9706 if (!hpsa_sas_port) { 9707 rc = -ENODEV; 9708 goto free_sas_node; 9709 } 9710 9711 hpsa_sas_phy = hpsa_alloc_sas_phy(hpsa_sas_port); 9712 if (!hpsa_sas_phy) { 9713 rc = -ENODEV; 9714 goto free_sas_port; 9715 } 9716 9717 rc = hpsa_sas_port_add_phy(hpsa_sas_phy); 9718 if (rc) 9719 goto free_sas_phy; 9720 9721 h->sas_host = hpsa_sas_node; 9722 9723 return 0; 9724 9725 free_sas_phy: 9726 hpsa_free_sas_phy(hpsa_sas_phy); 9727 free_sas_port: 9728 hpsa_free_sas_port(hpsa_sas_port); 9729 free_sas_node: 9730 hpsa_free_sas_node(hpsa_sas_node); 9731 9732 return rc; 9733 } 9734 9735 static void hpsa_delete_sas_host(struct ctlr_info *h) 9736 { 9737 hpsa_free_sas_node(h->sas_host); 9738 } 9739 9740 static int hpsa_add_sas_device(struct hpsa_sas_node *hpsa_sas_node, 9741 struct hpsa_scsi_dev_t *device) 9742 { 9743 int rc; 9744 struct hpsa_sas_port *hpsa_sas_port; 9745 struct sas_rphy *rphy; 9746 9747 hpsa_sas_port = hpsa_alloc_sas_port(hpsa_sas_node, device->sas_address); 9748 if (!hpsa_sas_port) 9749 return -ENOMEM; 9750 9751 rphy = sas_end_device_alloc(hpsa_sas_port->port); 9752 if (!rphy) { 9753 rc = -ENODEV; 9754 goto free_sas_port; 9755 } 9756 9757 hpsa_sas_port->rphy = rphy; 9758 device->sas_port = hpsa_sas_port; 9759 9760 rc = hpsa_sas_port_add_rphy(hpsa_sas_port, rphy); 9761 if (rc) 9762 goto free_sas_port; 9763 9764 return 0; 9765 9766 free_sas_port: 9767 hpsa_free_sas_port(hpsa_sas_port); 9768 device->sas_port = NULL; 9769 9770 return rc; 9771 } 9772 9773 static void hpsa_remove_sas_device(struct hpsa_scsi_dev_t *device) 9774 { 9775 if (device->sas_port) { 9776 hpsa_free_sas_port(device->sas_port); 9777 device->sas_port = NULL; 9778 } 9779 } 9780 9781 static int 9782 hpsa_sas_get_linkerrors(struct sas_phy *phy) 9783 { 9784 return 0; 9785 } 9786 9787 static int 9788 hpsa_sas_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier) 9789 { 9790 struct Scsi_Host *shost = phy_to_shost(rphy); 9791 struct ctlr_info *h; 9792 struct hpsa_scsi_dev_t *sd; 9793 9794 if (!shost) 9795 return -ENXIO; 9796 9797 h = shost_to_hba(shost); 9798 9799 if (!h) 9800 return -ENXIO; 9801 9802 sd = hpsa_find_device_by_sas_rphy(h, rphy); 9803 if (!sd) 9804 return -ENXIO; 9805 9806 *identifier = sd->eli; 9807 9808 return 0; 9809 } 9810 9811 static int 9812 hpsa_sas_get_bay_identifier(struct sas_rphy *rphy) 9813 { 9814 return -ENXIO; 9815 } 9816 9817 static int 9818 hpsa_sas_phy_reset(struct sas_phy *phy, int hard_reset) 9819 { 9820 return 0; 9821 } 9822 9823 static int 9824 hpsa_sas_phy_enable(struct sas_phy *phy, int enable) 9825 { 9826 return 0; 9827 } 9828 9829 static int 9830 hpsa_sas_phy_setup(struct sas_phy *phy) 9831 { 9832 return 0; 9833 } 9834 9835 static void 9836 hpsa_sas_phy_release(struct sas_phy *phy) 9837 { 9838 } 9839 9840 static int 9841 hpsa_sas_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates) 9842 { 9843 return -EINVAL; 9844 } 9845 9846 static struct sas_function_template hpsa_sas_transport_functions = { 9847 .get_linkerrors = hpsa_sas_get_linkerrors, 9848 .get_enclosure_identifier = hpsa_sas_get_enclosure_identifier, 9849 .get_bay_identifier = hpsa_sas_get_bay_identifier, 9850 .phy_reset = hpsa_sas_phy_reset, 9851 .phy_enable = hpsa_sas_phy_enable, 9852 .phy_setup = hpsa_sas_phy_setup, 9853 .phy_release = hpsa_sas_phy_release, 9854 .set_phy_speed = hpsa_sas_phy_speed, 9855 }; 9856 9857 /* 9858 * This is it. Register the PCI driver information for the cards we control 9859 * the OS will call our registered routines when it finds one of our cards. 9860 */ 9861 static int __init hpsa_init(void) 9862 { 9863 int rc; 9864 9865 hpsa_sas_transport_template = 9866 sas_attach_transport(&hpsa_sas_transport_functions); 9867 if (!hpsa_sas_transport_template) 9868 return -ENODEV; 9869 9870 rc = pci_register_driver(&hpsa_pci_driver); 9871 9872 if (rc) 9873 sas_release_transport(hpsa_sas_transport_template); 9874 9875 return rc; 9876 } 9877 9878 static void __exit hpsa_cleanup(void) 9879 { 9880 pci_unregister_driver(&hpsa_pci_driver); 9881 sas_release_transport(hpsa_sas_transport_template); 9882 } 9883 9884 static void __attribute__((unused)) verify_offsets(void) 9885 { 9886 #define VERIFY_OFFSET(member, offset) \ 9887 BUILD_BUG_ON(offsetof(struct raid_map_data, member) != offset) 9888 9889 VERIFY_OFFSET(structure_size, 0); 9890 VERIFY_OFFSET(volume_blk_size, 4); 9891 VERIFY_OFFSET(volume_blk_cnt, 8); 9892 VERIFY_OFFSET(phys_blk_shift, 16); 9893 VERIFY_OFFSET(parity_rotation_shift, 17); 9894 VERIFY_OFFSET(strip_size, 18); 9895 VERIFY_OFFSET(disk_starting_blk, 20); 9896 VERIFY_OFFSET(disk_blk_cnt, 28); 9897 VERIFY_OFFSET(data_disks_per_row, 36); 9898 VERIFY_OFFSET(metadata_disks_per_row, 38); 9899 VERIFY_OFFSET(row_cnt, 40); 9900 VERIFY_OFFSET(layout_map_count, 42); 9901 VERIFY_OFFSET(flags, 44); 9902 VERIFY_OFFSET(dekindex, 46); 9903 /* VERIFY_OFFSET(reserved, 48 */ 9904 VERIFY_OFFSET(data, 64); 9905 9906 #undef VERIFY_OFFSET 9907 9908 #define VERIFY_OFFSET(member, offset) \ 9909 BUILD_BUG_ON(offsetof(struct io_accel2_cmd, member) != offset) 9910 9911 VERIFY_OFFSET(IU_type, 0); 9912 VERIFY_OFFSET(direction, 1); 9913 VERIFY_OFFSET(reply_queue, 2); 9914 /* VERIFY_OFFSET(reserved1, 3); */ 9915 VERIFY_OFFSET(scsi_nexus, 4); 9916 VERIFY_OFFSET(Tag, 8); 9917 VERIFY_OFFSET(cdb, 16); 9918 VERIFY_OFFSET(cciss_lun, 32); 9919 VERIFY_OFFSET(data_len, 40); 9920 VERIFY_OFFSET(cmd_priority_task_attr, 44); 9921 VERIFY_OFFSET(sg_count, 45); 9922 /* VERIFY_OFFSET(reserved3 */ 9923 VERIFY_OFFSET(err_ptr, 48); 9924 VERIFY_OFFSET(err_len, 56); 9925 /* VERIFY_OFFSET(reserved4 */ 9926 VERIFY_OFFSET(sg, 64); 9927 9928 #undef VERIFY_OFFSET 9929 9930 #define VERIFY_OFFSET(member, offset) \ 9931 BUILD_BUG_ON(offsetof(struct io_accel1_cmd, member) != offset) 9932 9933 VERIFY_OFFSET(dev_handle, 0x00); 9934 VERIFY_OFFSET(reserved1, 0x02); 9935 VERIFY_OFFSET(function, 0x03); 9936 VERIFY_OFFSET(reserved2, 0x04); 9937 VERIFY_OFFSET(err_info, 0x0C); 9938 VERIFY_OFFSET(reserved3, 0x10); 9939 VERIFY_OFFSET(err_info_len, 0x12); 9940 VERIFY_OFFSET(reserved4, 0x13); 9941 VERIFY_OFFSET(sgl_offset, 0x14); 9942 VERIFY_OFFSET(reserved5, 0x15); 9943 VERIFY_OFFSET(transfer_len, 0x1C); 9944 VERIFY_OFFSET(reserved6, 0x20); 9945 VERIFY_OFFSET(io_flags, 0x24); 9946 VERIFY_OFFSET(reserved7, 0x26); 9947 VERIFY_OFFSET(LUN, 0x34); 9948 VERIFY_OFFSET(control, 0x3C); 9949 VERIFY_OFFSET(CDB, 0x40); 9950 VERIFY_OFFSET(reserved8, 0x50); 9951 VERIFY_OFFSET(host_context_flags, 0x60); 9952 VERIFY_OFFSET(timeout_sec, 0x62); 9953 VERIFY_OFFSET(ReplyQueue, 0x64); 9954 VERIFY_OFFSET(reserved9, 0x65); 9955 VERIFY_OFFSET(tag, 0x68); 9956 VERIFY_OFFSET(host_addr, 0x70); 9957 VERIFY_OFFSET(CISS_LUN, 0x78); 9958 VERIFY_OFFSET(SG, 0x78 + 8); 9959 #undef VERIFY_OFFSET 9960 } 9961 9962 module_init(hpsa_init); 9963 module_exit(hpsa_cleanup); 9964