xref: /openbmc/linux/drivers/scsi/g_NCR5380.c (revision 65417d9f)
1 /*
2  * Generic Generic NCR5380 driver
3  *
4  * Copyright 1993, Drew Eckhardt
5  * Visionary Computing
6  * (Unix and Linux consulting and custom programming)
7  * drew@colorado.edu
8  * +1 (303) 440-4894
9  *
10  * NCR53C400 extensions (c) 1994,1995,1996, Kevin Lentin
11  * K.Lentin@cs.monash.edu.au
12  *
13  * NCR53C400A extensions (c) 1996, Ingmar Baumgart
14  * ingmar@gonzo.schwaben.de
15  *
16  * DTC3181E extensions (c) 1997, Ronald van Cuijlenborg
17  * ronald.van.cuijlenborg@tip.nl or nutty@dds.nl
18  *
19  * Added ISAPNP support for DTC436 adapters,
20  * Thomas Sailer, sailer@ife.ee.ethz.ch
21  *
22  * See Documentation/scsi/g_NCR5380.txt for more info.
23  */
24 
25 #include <asm/io.h>
26 #include <linux/blkdev.h>
27 #include <linux/module.h>
28 #include <scsi/scsi_host.h>
29 #include <linux/init.h>
30 #include <linux/ioport.h>
31 #include <linux/isa.h>
32 #include <linux/pnp.h>
33 #include <linux/interrupt.h>
34 
35 /* Definitions for the core NCR5380 driver. */
36 
37 #define NCR5380_read(reg) \
38 	ioread8(hostdata->io + hostdata->offset + (reg))
39 #define NCR5380_write(reg, value) \
40 	iowrite8(value, hostdata->io + hostdata->offset + (reg))
41 
42 #define NCR5380_implementation_fields \
43 	int offset; \
44 	int c400_ctl_status; \
45 	int c400_blk_cnt; \
46 	int c400_host_buf; \
47 	int io_width; \
48 	int pdma_residual; \
49 	int board
50 
51 #define NCR5380_dma_xfer_len            generic_NCR5380_dma_xfer_len
52 #define NCR5380_dma_recv_setup          generic_NCR5380_precv
53 #define NCR5380_dma_send_setup          generic_NCR5380_psend
54 #define NCR5380_dma_residual            generic_NCR5380_dma_residual
55 
56 #define NCR5380_intr                    generic_NCR5380_intr
57 #define NCR5380_queue_command           generic_NCR5380_queue_command
58 #define NCR5380_abort                   generic_NCR5380_abort
59 #define NCR5380_host_reset              generic_NCR5380_host_reset
60 #define NCR5380_info                    generic_NCR5380_info
61 
62 #define NCR5380_io_delay(x)             udelay(x)
63 
64 #include "NCR5380.h"
65 
66 #define DRV_MODULE_NAME "g_NCR5380"
67 
68 #define NCR53C400_mem_base 0x3880
69 #define NCR53C400_host_buffer 0x3900
70 #define NCR53C400_region_size 0x3a00
71 
72 #define BOARD_NCR5380 0
73 #define BOARD_NCR53C400 1
74 #define BOARD_NCR53C400A 2
75 #define BOARD_DTC3181E 3
76 #define BOARD_HP_C2502 4
77 
78 #define IRQ_AUTO 254
79 
80 #define MAX_CARDS 8
81 #define DMA_MAX_SIZE 32768
82 
83 /* old-style parameters for compatibility */
84 static int ncr_irq = -1;
85 static int ncr_addr;
86 static int ncr_5380;
87 static int ncr_53c400;
88 static int ncr_53c400a;
89 static int dtc_3181e;
90 static int hp_c2502;
91 module_param_hw(ncr_irq, int, irq, 0);
92 module_param_hw(ncr_addr, int, ioport, 0);
93 module_param(ncr_5380, int, 0);
94 module_param(ncr_53c400, int, 0);
95 module_param(ncr_53c400a, int, 0);
96 module_param(dtc_3181e, int, 0);
97 module_param(hp_c2502, int, 0);
98 
99 static int irq[] = { -1, -1, -1, -1, -1, -1, -1, -1 };
100 module_param_hw_array(irq, int, irq, NULL, 0);
101 MODULE_PARM_DESC(irq, "IRQ number(s) (0=none, 254=auto [default])");
102 
103 static int base[] = { 0, 0, 0, 0, 0, 0, 0, 0 };
104 module_param_hw_array(base, int, ioport, NULL, 0);
105 MODULE_PARM_DESC(base, "base address(es)");
106 
107 static int card[] = { -1, -1, -1, -1, -1, -1, -1, -1 };
108 module_param_array(card, int, NULL, 0);
109 MODULE_PARM_DESC(card, "card type (0=NCR5380, 1=NCR53C400, 2=NCR53C400A, 3=DTC3181E, 4=HP C2502)");
110 
111 MODULE_ALIAS("g_NCR5380_mmio");
112 MODULE_LICENSE("GPL");
113 
114 static void g_NCR5380_trigger_irq(struct Scsi_Host *instance)
115 {
116 	struct NCR5380_hostdata *hostdata = shost_priv(instance);
117 
118 	/*
119 	 * An interrupt is triggered whenever BSY = false, SEL = true
120 	 * and a bit set in the SELECT_ENABLE_REG is asserted on the
121 	 * SCSI bus.
122 	 *
123 	 * Note that the bus is only driven when the phase control signals
124 	 * (I/O, C/D, and MSG) match those in the TCR.
125 	 */
126 	NCR5380_write(TARGET_COMMAND_REG,
127 	              PHASE_SR_TO_TCR(NCR5380_read(STATUS_REG) & PHASE_MASK));
128 	NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
129 	NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask);
130 	NCR5380_write(INITIATOR_COMMAND_REG,
131 	              ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_SEL);
132 
133 	msleep(1);
134 
135 	NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
136 	NCR5380_write(SELECT_ENABLE_REG, 0);
137 	NCR5380_write(TARGET_COMMAND_REG, 0);
138 }
139 
140 /**
141  * g_NCR5380_probe_irq - find the IRQ of a NCR5380 or equivalent
142  * @instance: SCSI host instance
143  *
144  * Autoprobe for the IRQ line used by the card by triggering an IRQ
145  * and then looking to see what interrupt actually turned up.
146  */
147 
148 static int g_NCR5380_probe_irq(struct Scsi_Host *instance)
149 {
150 	struct NCR5380_hostdata *hostdata = shost_priv(instance);
151 	int irq_mask, irq;
152 
153 	NCR5380_read(RESET_PARITY_INTERRUPT_REG);
154 	irq_mask = probe_irq_on();
155 	g_NCR5380_trigger_irq(instance);
156 	irq = probe_irq_off(irq_mask);
157 	NCR5380_read(RESET_PARITY_INTERRUPT_REG);
158 
159 	if (irq <= 0)
160 		return NO_IRQ;
161 	return irq;
162 }
163 
164 /*
165  * Configure I/O address of 53C400A or DTC436 by writing magic numbers
166  * to ports 0x779 and 0x379.
167  */
168 static void magic_configure(int idx, u8 irq, u8 magic[])
169 {
170 	u8 cfg = 0;
171 
172 	outb(magic[0], 0x779);
173 	outb(magic[1], 0x379);
174 	outb(magic[2], 0x379);
175 	outb(magic[3], 0x379);
176 	outb(magic[4], 0x379);
177 
178 	if (irq == 9)
179 		irq = 2;
180 
181 	if (idx >= 0 && idx <= 7)
182 		cfg = 0x80 | idx | (irq << 4);
183 	outb(cfg, 0x379);
184 }
185 
186 static irqreturn_t legacy_empty_irq_handler(int irq, void *dev_id)
187 {
188 	return IRQ_HANDLED;
189 }
190 
191 static int legacy_find_free_irq(int *irq_table)
192 {
193 	while (*irq_table != -1) {
194 		if (!request_irq(*irq_table, legacy_empty_irq_handler,
195 		                 IRQF_PROBE_SHARED, "Test IRQ",
196 		                 (void *)irq_table)) {
197 			free_irq(*irq_table, (void *) irq_table);
198 			return *irq_table;
199 		}
200 		irq_table++;
201 	}
202 	return -1;
203 }
204 
205 static unsigned int ncr_53c400a_ports[] = {
206 	0x280, 0x290, 0x300, 0x310, 0x330, 0x340, 0x348, 0x350, 0
207 };
208 static unsigned int dtc_3181e_ports[] = {
209 	0x220, 0x240, 0x280, 0x2a0, 0x2c0, 0x300, 0x320, 0x340, 0
210 };
211 static u8 ncr_53c400a_magic[] = {	/* 53C400A & DTC436 */
212 	0x59, 0xb9, 0xc5, 0xae, 0xa6
213 };
214 static u8 hp_c2502_magic[] = {	/* HP C2502 */
215 	0x0f, 0x22, 0xf0, 0x20, 0x80
216 };
217 static int hp_c2502_irqs[] = {
218 	9, 5, 7, 3, 4, -1
219 };
220 
221 static int generic_NCR5380_init_one(struct scsi_host_template *tpnt,
222 			struct device *pdev, int base, int irq, int board)
223 {
224 	bool is_pmio = base <= 0xffff;
225 	int ret;
226 	int flags = 0;
227 	unsigned int *ports = NULL;
228 	u8 *magic = NULL;
229 	int i;
230 	int port_idx = -1;
231 	unsigned long region_size;
232 	struct Scsi_Host *instance;
233 	struct NCR5380_hostdata *hostdata;
234 	u8 __iomem *iomem;
235 
236 	switch (board) {
237 	case BOARD_NCR5380:
238 		flags = FLAG_NO_PSEUDO_DMA | FLAG_DMA_FIXUP;
239 		break;
240 	case BOARD_NCR53C400A:
241 		ports = ncr_53c400a_ports;
242 		magic = ncr_53c400a_magic;
243 		break;
244 	case BOARD_HP_C2502:
245 		ports = ncr_53c400a_ports;
246 		magic = hp_c2502_magic;
247 		break;
248 	case BOARD_DTC3181E:
249 		ports = dtc_3181e_ports;
250 		magic = ncr_53c400a_magic;
251 		break;
252 	}
253 
254 	if (is_pmio && ports && magic) {
255 		/* wakeup sequence for the NCR53C400A and DTC3181E */
256 
257 		/* Disable the adapter and look for a free io port */
258 		magic_configure(-1, 0, magic);
259 
260 		region_size = 16;
261 		if (base)
262 			for (i = 0; ports[i]; i++) {
263 				if (base == ports[i]) {	/* index found */
264 					if (!request_region(ports[i],
265 							    region_size,
266 							    "ncr53c80"))
267 						return -EBUSY;
268 					break;
269 				}
270 			}
271 		else
272 			for (i = 0; ports[i]; i++) {
273 				if (!request_region(ports[i], region_size,
274 						    "ncr53c80"))
275 					continue;
276 				if (inb(ports[i]) == 0xff)
277 					break;
278 				release_region(ports[i], region_size);
279 			}
280 		if (ports[i]) {
281 			/* At this point we have our region reserved */
282 			magic_configure(i, 0, magic); /* no IRQ yet */
283 			base = ports[i];
284 			outb(0xc0, base + 9);
285 			if (inb(base + 9) != 0x80) {
286 				ret = -ENODEV;
287 				goto out_release;
288 			}
289 			port_idx = i;
290 		} else
291 			return -EINVAL;
292 	} else if (is_pmio) {
293 		/* NCR5380 - no configuration, just grab */
294 		region_size = 8;
295 		if (!base || !request_region(base, region_size, "ncr5380"))
296 			return -EBUSY;
297 	} else {	/* MMIO */
298 		region_size = NCR53C400_region_size;
299 		if (!request_mem_region(base, region_size, "ncr5380"))
300 			return -EBUSY;
301 	}
302 
303 	if (is_pmio)
304 		iomem = ioport_map(base, region_size);
305 	else
306 		iomem = ioremap(base, region_size);
307 
308 	if (!iomem) {
309 		ret = -ENOMEM;
310 		goto out_release;
311 	}
312 
313 	instance = scsi_host_alloc(tpnt, sizeof(struct NCR5380_hostdata));
314 	if (instance == NULL) {
315 		ret = -ENOMEM;
316 		goto out_unmap;
317 	}
318 	hostdata = shost_priv(instance);
319 
320 	hostdata->board = board;
321 	hostdata->io = iomem;
322 	hostdata->region_size = region_size;
323 
324 	if (is_pmio) {
325 		hostdata->io_port = base;
326 		hostdata->io_width = 1; /* 8-bit PDMA by default */
327 		hostdata->offset = 0;
328 
329 		/*
330 		 * On NCR53C400 boards, NCR5380 registers are mapped 8 past
331 		 * the base address.
332 		 */
333 		switch (board) {
334 		case BOARD_NCR53C400:
335 			hostdata->io_port += 8;
336 			hostdata->c400_ctl_status = 0;
337 			hostdata->c400_blk_cnt = 1;
338 			hostdata->c400_host_buf = 4;
339 			break;
340 		case BOARD_DTC3181E:
341 			hostdata->io_width = 2;	/* 16-bit PDMA */
342 			/* fall through */
343 		case BOARD_NCR53C400A:
344 		case BOARD_HP_C2502:
345 			hostdata->c400_ctl_status = 9;
346 			hostdata->c400_blk_cnt = 10;
347 			hostdata->c400_host_buf = 8;
348 			break;
349 		}
350 	} else {
351 		hostdata->base = base;
352 		hostdata->offset = NCR53C400_mem_base;
353 		switch (board) {
354 		case BOARD_NCR53C400:
355 			hostdata->c400_ctl_status = 0x100;
356 			hostdata->c400_blk_cnt = 0x101;
357 			hostdata->c400_host_buf = 0x104;
358 			break;
359 		case BOARD_DTC3181E:
360 		case BOARD_NCR53C400A:
361 		case BOARD_HP_C2502:
362 			pr_err(DRV_MODULE_NAME ": unknown register offsets\n");
363 			ret = -EINVAL;
364 			goto out_unregister;
365 		}
366 	}
367 
368 	/* Check for vacant slot */
369 	NCR5380_write(MODE_REG, 0);
370 	if (NCR5380_read(MODE_REG) != 0) {
371 		ret = -ENODEV;
372 		goto out_unregister;
373 	}
374 
375 	ret = NCR5380_init(instance, flags | FLAG_LATE_DMA_SETUP);
376 	if (ret)
377 		goto out_unregister;
378 
379 	switch (board) {
380 	case BOARD_NCR53C400:
381 	case BOARD_DTC3181E:
382 	case BOARD_NCR53C400A:
383 	case BOARD_HP_C2502:
384 		NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
385 	}
386 
387 	NCR5380_maybe_reset_bus(instance);
388 
389 	/* Compatibility with documented NCR5380 kernel parameters */
390 	if (irq == 255 || irq == 0)
391 		irq = NO_IRQ;
392 	else if (irq == -1)
393 		irq = IRQ_AUTO;
394 
395 	if (board == BOARD_HP_C2502) {
396 		int *irq_table = hp_c2502_irqs;
397 		int board_irq = -1;
398 
399 		switch (irq) {
400 		case NO_IRQ:
401 			board_irq = 0;
402 			break;
403 		case IRQ_AUTO:
404 			board_irq = legacy_find_free_irq(irq_table);
405 			break;
406 		default:
407 			while (*irq_table != -1)
408 				if (*irq_table++ == irq)
409 					board_irq = irq;
410 		}
411 
412 		if (board_irq <= 0) {
413 			board_irq = 0;
414 			irq = NO_IRQ;
415 		}
416 
417 		magic_configure(port_idx, board_irq, magic);
418 	}
419 
420 	if (irq == IRQ_AUTO) {
421 		instance->irq = g_NCR5380_probe_irq(instance);
422 		if (instance->irq == NO_IRQ)
423 			shost_printk(KERN_INFO, instance, "no irq detected\n");
424 	} else {
425 		instance->irq = irq;
426 		if (instance->irq == NO_IRQ)
427 			shost_printk(KERN_INFO, instance, "no irq provided\n");
428 	}
429 
430 	if (instance->irq != NO_IRQ) {
431 		if (request_irq(instance->irq, generic_NCR5380_intr,
432 				0, "NCR5380", instance)) {
433 			instance->irq = NO_IRQ;
434 			shost_printk(KERN_INFO, instance,
435 			             "irq %d denied\n", instance->irq);
436 		} else {
437 			shost_printk(KERN_INFO, instance,
438 			             "irq %d acquired\n", instance->irq);
439 		}
440 	}
441 
442 	ret = scsi_add_host(instance, pdev);
443 	if (ret)
444 		goto out_free_irq;
445 	scsi_scan_host(instance);
446 	dev_set_drvdata(pdev, instance);
447 	return 0;
448 
449 out_free_irq:
450 	if (instance->irq != NO_IRQ)
451 		free_irq(instance->irq, instance);
452 	NCR5380_exit(instance);
453 out_unregister:
454 	scsi_host_put(instance);
455 out_unmap:
456 	iounmap(iomem);
457 out_release:
458 	if (is_pmio)
459 		release_region(base, region_size);
460 	else
461 		release_mem_region(base, region_size);
462 	return ret;
463 }
464 
465 static void generic_NCR5380_release_resources(struct Scsi_Host *instance)
466 {
467 	struct NCR5380_hostdata *hostdata = shost_priv(instance);
468 	void __iomem *iomem = hostdata->io;
469 	unsigned long io_port = hostdata->io_port;
470 	unsigned long base = hostdata->base;
471 	unsigned long region_size = hostdata->region_size;
472 
473 	scsi_remove_host(instance);
474 	if (instance->irq != NO_IRQ)
475 		free_irq(instance->irq, instance);
476 	NCR5380_exit(instance);
477 	scsi_host_put(instance);
478 	iounmap(iomem);
479 	if (io_port)
480 		release_region(io_port, region_size);
481 	else
482 		release_mem_region(base, region_size);
483 }
484 
485 /* wait_for_53c80_access - wait for 53C80 registers to become accessible
486  * @hostdata: scsi host private data
487  *
488  * The registers within the 53C80 logic block are inaccessible until
489  * bit 7 in the 53C400 control status register gets asserted.
490  */
491 
492 static void wait_for_53c80_access(struct NCR5380_hostdata *hostdata)
493 {
494 	int count = 10000;
495 
496 	do {
497 		if (hostdata->board == BOARD_DTC3181E)
498 			udelay(4); /* DTC436 chip hangs without this */
499 		if (NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG)
500 			return;
501 	} while (--count > 0);
502 
503 	scmd_printk(KERN_ERR, hostdata->connected,
504 	            "53c80 registers not accessible, device will be reset\n");
505 	NCR5380_write(hostdata->c400_ctl_status, CSR_RESET);
506 	NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
507 }
508 
509 /**
510  * generic_NCR5380_precv - pseudo DMA receive
511  * @hostdata: scsi host private data
512  * @dst: buffer to write into
513  * @len: transfer size
514  *
515  * Perform a pseudo DMA mode receive from a 53C400 or equivalent device.
516  */
517 
518 static inline int generic_NCR5380_precv(struct NCR5380_hostdata *hostdata,
519                                         unsigned char *dst, int len)
520 {
521 	int residual;
522 	int start = 0;
523 
524 	NCR5380_write(hostdata->c400_ctl_status, CSR_BASE | CSR_TRANS_DIR);
525 	NCR5380_write(hostdata->c400_blk_cnt, len / 128);
526 
527 	do {
528 		if (start == len - 128) {
529 			/* Ignore End of DMA interrupt for the final buffer */
530 			if (NCR5380_poll_politely(hostdata, hostdata->c400_ctl_status,
531 			                          CSR_HOST_BUF_NOT_RDY, 0, HZ / 64) < 0)
532 				break;
533 		} else {
534 			if (NCR5380_poll_politely2(hostdata, hostdata->c400_ctl_status,
535 			                           CSR_HOST_BUF_NOT_RDY, 0,
536 			                           hostdata->c400_ctl_status,
537 			                           CSR_GATED_53C80_IRQ,
538 			                           CSR_GATED_53C80_IRQ, HZ / 64) < 0 ||
539 			    NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
540 				break;
541 		}
542 
543 		if (hostdata->io_port && hostdata->io_width == 2)
544 			insw(hostdata->io_port + hostdata->c400_host_buf,
545 			     dst + start, 64);
546 		else if (hostdata->io_port)
547 			insb(hostdata->io_port + hostdata->c400_host_buf,
548 			     dst + start, 128);
549 		else
550 			memcpy_fromio(dst + start,
551 				hostdata->io + NCR53C400_host_buffer, 128);
552 		start += 128;
553 	} while (start < len);
554 
555 	residual = len - start;
556 
557 	if (residual != 0) {
558 		/* 53c80 interrupt or transfer timeout. Reset 53c400 logic. */
559 		NCR5380_write(hostdata->c400_ctl_status, CSR_RESET);
560 		NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
561 	}
562 	wait_for_53c80_access(hostdata);
563 
564 	if (residual == 0 && NCR5380_poll_politely(hostdata, BUS_AND_STATUS_REG,
565 	                                           BASR_END_DMA_TRANSFER,
566 	                                           BASR_END_DMA_TRANSFER,
567 	                                           HZ / 64) < 0)
568 		scmd_printk(KERN_ERR, hostdata->connected, "%s: End of DMA timeout\n",
569 		            __func__);
570 
571 	hostdata->pdma_residual = residual;
572 
573 	return 0;
574 }
575 
576 /**
577  * generic_NCR5380_psend - pseudo DMA send
578  * @hostdata: scsi host private data
579  * @src: buffer to read from
580  * @len: transfer size
581  *
582  * Perform a pseudo DMA mode send to a 53C400 or equivalent device.
583  */
584 
585 static inline int generic_NCR5380_psend(struct NCR5380_hostdata *hostdata,
586                                         unsigned char *src, int len)
587 {
588 	int residual;
589 	int start = 0;
590 
591 	NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
592 	NCR5380_write(hostdata->c400_blk_cnt, len / 128);
593 
594 	do {
595 		if (NCR5380_poll_politely2(hostdata, hostdata->c400_ctl_status,
596 		                           CSR_HOST_BUF_NOT_RDY, 0,
597 		                           hostdata->c400_ctl_status,
598 		                           CSR_GATED_53C80_IRQ,
599 		                           CSR_GATED_53C80_IRQ, HZ / 64) < 0 ||
600 		    NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY) {
601 			/* Both 128 B buffers are in use */
602 			if (start >= 128)
603 				start -= 128;
604 			if (start >= 128)
605 				start -= 128;
606 			break;
607 		}
608 
609 		if (start >= len && NCR5380_read(hostdata->c400_blk_cnt) == 0)
610 			break;
611 
612 		if (NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ) {
613 			/* Host buffer is empty, other one is in use */
614 			if (start >= 128)
615 				start -= 128;
616 			break;
617 		}
618 
619 		if (start >= len)
620 			continue;
621 
622 		if (hostdata->io_port && hostdata->io_width == 2)
623 			outsw(hostdata->io_port + hostdata->c400_host_buf,
624 			      src + start, 64);
625 		else if (hostdata->io_port)
626 			outsb(hostdata->io_port + hostdata->c400_host_buf,
627 			      src + start, 128);
628 		else
629 			memcpy_toio(hostdata->io + NCR53C400_host_buffer,
630 			            src + start, 128);
631 		start += 128;
632 	} while (1);
633 
634 	residual = len - start;
635 
636 	if (residual != 0) {
637 		/* 53c80 interrupt or transfer timeout. Reset 53c400 logic. */
638 		NCR5380_write(hostdata->c400_ctl_status, CSR_RESET);
639 		NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
640 	}
641 	wait_for_53c80_access(hostdata);
642 
643 	if (residual == 0) {
644 		if (NCR5380_poll_politely(hostdata, TARGET_COMMAND_REG,
645 		                          TCR_LAST_BYTE_SENT, TCR_LAST_BYTE_SENT,
646 		                          HZ / 64) < 0)
647 			scmd_printk(KERN_ERR, hostdata->connected,
648 			            "%s: Last Byte Sent timeout\n", __func__);
649 
650 		if (NCR5380_poll_politely(hostdata, BUS_AND_STATUS_REG,
651 		                          BASR_END_DMA_TRANSFER, BASR_END_DMA_TRANSFER,
652 		                          HZ / 64) < 0)
653 			scmd_printk(KERN_ERR, hostdata->connected, "%s: End of DMA timeout\n",
654 			            __func__);
655 	}
656 
657 	hostdata->pdma_residual = residual;
658 
659 	return 0;
660 }
661 
662 static int generic_NCR5380_dma_xfer_len(struct NCR5380_hostdata *hostdata,
663                                         struct scsi_cmnd *cmd)
664 {
665 	int transfersize = cmd->SCp.this_residual;
666 
667 	if (hostdata->flags & FLAG_NO_PSEUDO_DMA)
668 		return 0;
669 
670 	/* 53C400 datasheet: non-modulo-128-byte transfers should use PIO */
671 	if (transfersize % 128)
672 		return 0;
673 
674 	/* Limit PDMA send to 512 B to avoid random corruption on DTC3181E */
675 	if (hostdata->board == BOARD_DTC3181E &&
676 	    cmd->sc_data_direction == DMA_TO_DEVICE)
677 		transfersize = min(cmd->SCp.this_residual, 512);
678 
679 	return min(transfersize, DMA_MAX_SIZE);
680 }
681 
682 static int generic_NCR5380_dma_residual(struct NCR5380_hostdata *hostdata)
683 {
684 	return hostdata->pdma_residual;
685 }
686 
687 /* Include the core driver code. */
688 
689 #include "NCR5380.c"
690 
691 static struct scsi_host_template driver_template = {
692 	.module			= THIS_MODULE,
693 	.proc_name		= DRV_MODULE_NAME,
694 	.name			= "Generic NCR5380/NCR53C400 SCSI",
695 	.info			= generic_NCR5380_info,
696 	.queuecommand		= generic_NCR5380_queue_command,
697 	.eh_abort_handler	= generic_NCR5380_abort,
698 	.eh_host_reset_handler	= generic_NCR5380_host_reset,
699 	.can_queue		= 16,
700 	.this_id		= 7,
701 	.sg_tablesize		= SG_ALL,
702 	.cmd_per_lun		= 2,
703 	.use_clustering		= DISABLE_CLUSTERING,
704 	.cmd_size		= NCR5380_CMD_SIZE,
705 	.max_sectors		= 128,
706 };
707 
708 static int generic_NCR5380_isa_match(struct device *pdev, unsigned int ndev)
709 {
710 	int ret = generic_NCR5380_init_one(&driver_template, pdev, base[ndev],
711 	                                   irq[ndev], card[ndev]);
712 	if (ret) {
713 		if (base[ndev])
714 			printk(KERN_WARNING "Card not found at address 0x%03x\n",
715 			       base[ndev]);
716 		return 0;
717 	}
718 
719 	return 1;
720 }
721 
722 static int generic_NCR5380_isa_remove(struct device *pdev,
723                                       unsigned int ndev)
724 {
725 	generic_NCR5380_release_resources(dev_get_drvdata(pdev));
726 	dev_set_drvdata(pdev, NULL);
727 	return 0;
728 }
729 
730 static struct isa_driver generic_NCR5380_isa_driver = {
731 	.match		= generic_NCR5380_isa_match,
732 	.remove		= generic_NCR5380_isa_remove,
733 	.driver		= {
734 		.name	= DRV_MODULE_NAME
735 	},
736 };
737 
738 #ifdef CONFIG_PNP
739 static const struct pnp_device_id generic_NCR5380_pnp_ids[] = {
740 	{ .id = "DTC436e", .driver_data = BOARD_DTC3181E },
741 	{ .id = "" }
742 };
743 MODULE_DEVICE_TABLE(pnp, generic_NCR5380_pnp_ids);
744 
745 static int generic_NCR5380_pnp_probe(struct pnp_dev *pdev,
746                                      const struct pnp_device_id *id)
747 {
748 	int base, irq;
749 
750 	if (pnp_activate_dev(pdev) < 0)
751 		return -EBUSY;
752 
753 	base = pnp_port_start(pdev, 0);
754 	irq = pnp_irq(pdev, 0);
755 
756 	return generic_NCR5380_init_one(&driver_template, &pdev->dev, base, irq,
757 	                                id->driver_data);
758 }
759 
760 static void generic_NCR5380_pnp_remove(struct pnp_dev *pdev)
761 {
762 	generic_NCR5380_release_resources(pnp_get_drvdata(pdev));
763 	pnp_set_drvdata(pdev, NULL);
764 }
765 
766 static struct pnp_driver generic_NCR5380_pnp_driver = {
767 	.name		= DRV_MODULE_NAME,
768 	.id_table	= generic_NCR5380_pnp_ids,
769 	.probe		= generic_NCR5380_pnp_probe,
770 	.remove		= generic_NCR5380_pnp_remove,
771 };
772 #endif /* defined(CONFIG_PNP) */
773 
774 static int pnp_registered, isa_registered;
775 
776 static int __init generic_NCR5380_init(void)
777 {
778 	int ret = 0;
779 
780 	/* compatibility with old-style parameters */
781 	if (irq[0] == -1 && base[0] == 0 && card[0] == -1) {
782 		irq[0] = ncr_irq;
783 		base[0] = ncr_addr;
784 		if (ncr_5380)
785 			card[0] = BOARD_NCR5380;
786 		if (ncr_53c400)
787 			card[0] = BOARD_NCR53C400;
788 		if (ncr_53c400a)
789 			card[0] = BOARD_NCR53C400A;
790 		if (dtc_3181e)
791 			card[0] = BOARD_DTC3181E;
792 		if (hp_c2502)
793 			card[0] = BOARD_HP_C2502;
794 	}
795 
796 #ifdef CONFIG_PNP
797 	if (!pnp_register_driver(&generic_NCR5380_pnp_driver))
798 		pnp_registered = 1;
799 #endif
800 	ret = isa_register_driver(&generic_NCR5380_isa_driver, MAX_CARDS);
801 	if (!ret)
802 		isa_registered = 1;
803 
804 	return (pnp_registered || isa_registered) ? 0 : ret;
805 }
806 
807 static void __exit generic_NCR5380_exit(void)
808 {
809 #ifdef CONFIG_PNP
810 	if (pnp_registered)
811 		pnp_unregister_driver(&generic_NCR5380_pnp_driver);
812 #endif
813 	if (isa_registered)
814 		isa_unregister_driver(&generic_NCR5380_isa_driver);
815 }
816 
817 module_init(generic_NCR5380_init);
818 module_exit(generic_NCR5380_exit);
819