xref: /openbmc/linux/drivers/scsi/fnic/vnic_devcmd.h (revision d7a3d85e)
1 /*
2  * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
3  * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
4  *
5  * This program is free software; you may redistribute it and/or modify
6  * it under the terms of the GNU General Public License as published by
7  * the Free Software Foundation; version 2 of the License.
8  *
9  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
10  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
11  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
12  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
13  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
14  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
15  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
16  * SOFTWARE.
17  */
18 #ifndef _VNIC_DEVCMD_H_
19 #define _VNIC_DEVCMD_H_
20 
21 #define _CMD_NBITS      14
22 #define _CMD_VTYPEBITS	10
23 #define _CMD_FLAGSBITS  6
24 #define _CMD_DIRBITS	2
25 
26 #define _CMD_NMASK      ((1 << _CMD_NBITS)-1)
27 #define _CMD_VTYPEMASK  ((1 << _CMD_VTYPEBITS)-1)
28 #define _CMD_FLAGSMASK  ((1 << _CMD_FLAGSBITS)-1)
29 #define _CMD_DIRMASK    ((1 << _CMD_DIRBITS)-1)
30 
31 #define _CMD_NSHIFT     0
32 #define _CMD_VTYPESHIFT (_CMD_NSHIFT+_CMD_NBITS)
33 #define _CMD_FLAGSSHIFT (_CMD_VTYPESHIFT+_CMD_VTYPEBITS)
34 #define _CMD_DIRSHIFT   (_CMD_FLAGSSHIFT+_CMD_FLAGSBITS)
35 
36 /*
37  * Direction bits (from host perspective).
38  */
39 #define _CMD_DIR_NONE   0U
40 #define _CMD_DIR_WRITE  1U
41 #define _CMD_DIR_READ   2U
42 #define _CMD_DIR_RW     (_CMD_DIR_WRITE | _CMD_DIR_READ)
43 
44 /*
45  * Flag bits.
46  */
47 #define _CMD_FLAGS_NONE 0U
48 #define _CMD_FLAGS_NOWAIT 1U
49 
50 /*
51  * vNIC type bits.
52  */
53 #define _CMD_VTYPE_NONE  0U
54 #define _CMD_VTYPE_ENET  1U
55 #define _CMD_VTYPE_FC    2U
56 #define _CMD_VTYPE_SCSI  4U
57 #define _CMD_VTYPE_ALL   (_CMD_VTYPE_ENET | _CMD_VTYPE_FC | _CMD_VTYPE_SCSI)
58 
59 /*
60  * Used to create cmds..
61 */
62 #define _CMDCF(dir, flags, vtype, nr)  \
63 	(((dir)   << _CMD_DIRSHIFT) | \
64 	((flags) << _CMD_FLAGSSHIFT) | \
65 	((vtype) << _CMD_VTYPESHIFT) | \
66 	((nr)    << _CMD_NSHIFT))
67 #define _CMDC(dir, vtype, nr)    _CMDCF(dir, 0, vtype, nr)
68 #define _CMDCNW(dir, vtype, nr)  _CMDCF(dir, _CMD_FLAGS_NOWAIT, vtype, nr)
69 
70 /*
71  * Used to decode cmds..
72 */
73 #define _CMD_DIR(cmd)            (((cmd) >> _CMD_DIRSHIFT) & _CMD_DIRMASK)
74 #define _CMD_FLAGS(cmd)          (((cmd) >> _CMD_FLAGSSHIFT) & _CMD_FLAGSMASK)
75 #define _CMD_VTYPE(cmd)          (((cmd) >> _CMD_VTYPESHIFT) & _CMD_VTYPEMASK)
76 #define _CMD_N(cmd)              (((cmd) >> _CMD_NSHIFT) & _CMD_NMASK)
77 
78 enum vnic_devcmd_cmd {
79 	CMD_NONE                = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_NONE, 0),
80 
81 	/* mcpu fw info in mem: (u64)a0=paddr to struct vnic_devcmd_fw_info */
82 	CMD_MCPU_FW_INFO        = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 1),
83 
84 	/* dev-specific block member:
85 	 *    in: (u16)a0=offset,(u8)a1=size
86 	 *    out: a0=value */
87 	CMD_DEV_SPEC            = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 2),
88 
89 	/* stats clear */
90 	CMD_STATS_CLEAR         = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 3),
91 
92 	/* stats dump in mem: (u64)a0=paddr to stats area,
93 	 *                    (u16)a1=sizeof stats area */
94 	CMD_STATS_DUMP          = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 4),
95 
96 	/* set Rx packet filter: (u32)a0=filters (see CMD_PFILTER_*) */
97 	CMD_PACKET_FILTER       = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 7),
98 
99 	/* hang detection notification */
100 	CMD_HANG_NOTIFY         = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 8),
101 
102 	/* MAC address in (u48)a0 */
103 	CMD_MAC_ADDR            = _CMDC(_CMD_DIR_READ,
104 					_CMD_VTYPE_ENET | _CMD_VTYPE_FC, 9),
105 
106 	/* disable/enable promisc mode: (u8)a0=0/1 */
107 /***** XXX DEPRECATED *****/
108 	CMD_PROMISC_MODE        = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 10),
109 
110 	/* disable/enable all-multi mode: (u8)a0=0/1 */
111 /***** XXX DEPRECATED *****/
112 	CMD_ALLMULTI_MODE       = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 11),
113 
114 	/* add addr from (u48)a0 */
115 	CMD_ADDR_ADD            = _CMDCNW(_CMD_DIR_WRITE,
116 					_CMD_VTYPE_ENET | _CMD_VTYPE_FC, 12),
117 
118 	/* del addr from (u48)a0 */
119 	CMD_ADDR_DEL            = _CMDCNW(_CMD_DIR_WRITE,
120 					_CMD_VTYPE_ENET | _CMD_VTYPE_FC, 13),
121 
122 	/* add VLAN id in (u16)a0 */
123 	CMD_VLAN_ADD            = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 14),
124 
125 	/* del VLAN id in (u16)a0 */
126 	CMD_VLAN_DEL            = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 15),
127 
128 	/* nic_cfg in (u32)a0 */
129 	CMD_NIC_CFG             = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 16),
130 
131 	/* union vnic_rss_key in mem: (u64)a0=paddr, (u16)a1=len */
132 	CMD_RSS_KEY             = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 17),
133 
134 	/* union vnic_rss_cpu in mem: (u64)a0=paddr, (u16)a1=len */
135 	CMD_RSS_CPU             = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 18),
136 
137 	/* initiate softreset */
138 	CMD_SOFT_RESET          = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 19),
139 
140 	/* softreset status:
141 	 *    out: a0=0 reset complete, a0=1 reset in progress */
142 	CMD_SOFT_RESET_STATUS   = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 20),
143 
144 	/* set struct vnic_devcmd_notify buffer in mem:
145 	 * in:
146 	 *   (u64)a0=paddr to notify (set paddr=0 to unset)
147 	 *   (u32)a1 & 0x00000000ffffffff=sizeof(struct vnic_devcmd_notify)
148 	 *   (u16)a1 & 0x0000ffff00000000=intr num (-1 for no intr)
149 	 * out:
150 	 *   (u32)a1 = effective size
151 	 */
152 	CMD_NOTIFY              = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 21),
153 
154 	/* UNDI API: (u64)a0=paddr to s_PXENV_UNDI_ struct,
155 	 *           (u8)a1=PXENV_UNDI_xxx */
156 	CMD_UNDI                = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 22),
157 
158 	/* initiate open sequence (u32)a0=flags (see CMD_OPENF_*) */
159 	CMD_OPEN		= _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 23),
160 
161 	/* open status:
162 	 *    out: a0=0 open complete, a0=1 open in progress */
163 	CMD_OPEN_STATUS		= _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 24),
164 
165 	/* close vnic */
166 	CMD_CLOSE		= _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 25),
167 
168 	/* initialize virtual link: (u32)a0=flags (see CMD_INITF_*) */
169 	CMD_INIT		= _CMDCNW(_CMD_DIR_READ, _CMD_VTYPE_ALL, 26),
170 
171 	/* variant of CMD_INIT, with provisioning info
172 	 *     (u64)a0=paddr of vnic_devcmd_provinfo
173 	 *     (u32)a1=sizeof provision info */
174 	CMD_INIT_PROV_INFO	= _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 27),
175 
176 	/* enable virtual link */
177 	CMD_ENABLE		= _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 28),
178 
179 	/* disable virtual link */
180 	CMD_DISABLE		= _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 29),
181 
182 	/* stats dump all vnics on uplink in mem: (u64)a0=paddr (u32)a1=uif */
183 	CMD_STATS_DUMP_ALL	= _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 30),
184 
185 	/* init status:
186 	 *    out: a0=0 init complete, a0=1 init in progress
187 	 *         if a0=0, a1=errno */
188 	CMD_INIT_STATUS		= _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 31),
189 
190 	/* INT13 API: (u64)a0=paddr to vnic_int13_params struct
191 	 *            (u8)a1=INT13_CMD_xxx */
192 	CMD_INT13               = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_FC, 32),
193 
194 	/* logical uplink enable/disable: (u64)a0: 0/1=disable/enable */
195 	CMD_LOGICAL_UPLINK      = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 33),
196 
197 	/* undo initialize of virtual link */
198 	CMD_DEINIT		= _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 34),
199 
200 	/* check fw capability of a cmd:
201 	 * in:  (u32)a0=cmd
202 	 * out: (u32)a0=errno, 0:valid cmd, a1=supported VNIC_STF_* bits */
203 	CMD_CAPABILITY      = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 36),
204 
205 	/* persistent binding info
206 	 * in:  (u64)a0=paddr of arg
207 	 *      (u32)a1=CMD_PERBI_XXX */
208 	CMD_PERBI       = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_FC, 37),
209 
210 	/* Interrupt Assert Register functionality
211 	 * in: (u16)a0=interrupt number to assert
212 	 */
213 	CMD_IAR         = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 38),
214 
215 	/* initiate hangreset, like softreset after hang detected */
216 	CMD_HANG_RESET      = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 39),
217 
218 	/* hangreset status:
219 	 *    out: a0=0 reset complete, a0=1 reset in progress */
220 	CMD_HANG_RESET_STATUS   = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 40),
221 
222 	/*
223 	 * Set hw ingress packet vlan rewrite mode:
224 	 * in:  (u32)a0=new vlan rewrite mode
225 	 * out: (u32)a0=old vlan rewrite mode */
226 	CMD_IG_VLAN_REWRITE_MODE = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ENET, 41),
227 
228 	/*
229 	 * in:  (u16)a0=bdf of target vnic
230 	 *      (u32)a1=cmd to proxy
231 	 *      a2-a15=args to cmd in a1
232 	 * out: (u32)a0=status of proxied cmd
233 	 *      a1-a15=out args of proxied cmd */
234 	CMD_PROXY_BY_BDF =  _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 42),
235 
236 	/*
237 	 * As for BY_BDF except a0 is index of hvnlink subordinate vnic
238 	 * or SR-IOV virtual vnic
239 	 */
240 	CMD_PROXY_BY_INDEX =    _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 43),
241 
242 	/*
243 	 * For HPP toggle:
244 	 * adapter-info-get
245 	 * in:  (u64)a0=phsical address of buffer passed in from caller.
246 	 *      (u16)a1=size of buffer specified in a0.
247 	 * out: (u64)a0=phsical address of buffer passed in from caller.
248 	 *      (u16)a1=actual bytes from VIF-CONFIG-INFO TLV, or
249 	 *              0 if no VIF-CONFIG-INFO TLV was ever received. */
250 	CMD_CONFIG_INFO_GET = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 44),
251 
252 	/*
253 	 * INT13 API: (u64)a0=paddr to vnic_int13_params struct
254 	 *            (u32)a1=INT13_CMD_xxx
255 	 */
256 	CMD_INT13_ALL = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 45),
257 
258 	/*
259 	 * Set default vlan:
260 	 * in: (u16)a0=new default vlan
261 	 *     (u16)a1=zero for overriding vlan with param a0,
262 	 *             non-zero for resetting vlan to the default
263 	 * out: (u16)a0=old default vlan
264 	 */
265 	CMD_SET_DEFAULT_VLAN = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 46)
266 };
267 
268 /* flags for CMD_OPEN */
269 #define CMD_OPENF_OPROM		0x1	/* open coming from option rom */
270 
271 /* flags for CMD_INIT */
272 #define CMD_INITF_DEFAULT_MAC	0x1	/* init with default mac addr */
273 
274 /* flags for CMD_PACKET_FILTER */
275 #define CMD_PFILTER_DIRECTED		0x01
276 #define CMD_PFILTER_MULTICAST		0x02
277 #define CMD_PFILTER_BROADCAST		0x04
278 #define CMD_PFILTER_PROMISCUOUS		0x08
279 #define CMD_PFILTER_ALL_MULTICAST	0x10
280 
281 enum vnic_devcmd_status {
282 	STAT_NONE = 0,
283 	STAT_BUSY = 1 << 0,	/* cmd in progress */
284 	STAT_ERROR = 1 << 1,	/* last cmd caused error (code in a0) */
285 };
286 
287 enum vnic_devcmd_error {
288 	ERR_SUCCESS = 0,
289 	ERR_EINVAL = 1,
290 	ERR_EFAULT = 2,
291 	ERR_EPERM = 3,
292 	ERR_EBUSY = 4,
293 	ERR_ECMDUNKNOWN = 5,
294 	ERR_EBADSTATE = 6,
295 	ERR_ENOMEM = 7,
296 	ERR_ETIMEDOUT = 8,
297 	ERR_ELINKDOWN = 9,
298 };
299 
300 struct vnic_devcmd_fw_info {
301 	char fw_version[32];
302 	char fw_build[32];
303 	char hw_version[32];
304 	char hw_serial_number[32];
305 };
306 
307 struct vnic_devcmd_notify {
308 	u32 csum;		/* checksum over following words */
309 
310 	u32 link_state;		/* link up == 1 */
311 	u32 port_speed;		/* effective port speed (rate limit) */
312 	u32 mtu;		/* MTU */
313 	u32 msglvl;		/* requested driver msg lvl */
314 	u32 uif;		/* uplink interface */
315 	u32 status;		/* status bits (see VNIC_STF_*) */
316 	u32 error;		/* error code (see ERR_*) for first ERR */
317 	u32 link_down_cnt;	/* running count of link down transitions */
318 };
319 #define VNIC_STF_FATAL_ERR	0x0001	/* fatal fw error */
320 
321 struct vnic_devcmd_provinfo {
322 	u8 oui[3];
323 	u8 type;
324 	u8 data[0];
325 };
326 
327 /*
328  * Writing cmd register causes STAT_BUSY to get set in status register.
329  * When cmd completes, STAT_BUSY will be cleared.
330  *
331  * If cmd completed successfully STAT_ERROR will be clear
332  * and args registers contain cmd-specific results.
333  *
334  * If cmd error, STAT_ERROR will be set and args[0] contains error code.
335  *
336  * status register is read-only.  While STAT_BUSY is set,
337  * all other register contents are read-only.
338  */
339 
340 /* Make sizeof(vnic_devcmd) a power-of-2 for I/O BAR. */
341 #define VNIC_DEVCMD_NARGS 15
342 struct vnic_devcmd {
343 	u32 status;			/* RO */
344 	u32 cmd;			/* RW */
345 	u64 args[VNIC_DEVCMD_NARGS];	/* RW cmd args (little-endian) */
346 };
347 
348 #endif /* _VNIC_DEVCMD_H_ */
349