1 /* 2 * Target driver for EMC CLARiiON AX/CX-series hardware. 3 * Based on code from Lars Marowsky-Bree <lmb@suse.de> 4 * and Ed Goggin <egoggin@emc.com>. 5 * 6 * Copyright (C) 2006 Red Hat, Inc. All rights reserved. 7 * Copyright (C) 2006 Mike Christie 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License as published by 11 * the Free Software Foundation; either version 2, or (at your option) 12 * any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; see the file COPYING. If not, write to 21 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. 22 */ 23 #include <scsi/scsi.h> 24 #include <scsi/scsi_eh.h> 25 #include <scsi/scsi_dh.h> 26 #include <scsi/scsi_device.h> 27 28 #define CLARIION_NAME "emc" 29 30 #define CLARIION_TRESPASS_PAGE 0x22 31 #define CLARIION_BUFFER_SIZE 0xFC 32 #define CLARIION_TIMEOUT (60 * HZ) 33 #define CLARIION_RETRIES 3 34 #define CLARIION_UNBOUND_LU -1 35 #define CLARIION_SP_A 0 36 #define CLARIION_SP_B 1 37 38 /* Flags */ 39 #define CLARIION_SHORT_TRESPASS 1 40 #define CLARIION_HONOR_RESERVATIONS 2 41 42 /* LUN states */ 43 #define CLARIION_LUN_UNINITIALIZED -1 44 #define CLARIION_LUN_UNBOUND 0 45 #define CLARIION_LUN_BOUND 1 46 #define CLARIION_LUN_OWNED 2 47 48 static unsigned char long_trespass[] = { 49 0, 0, 0, 0, 0, 0, 0, 0, 50 CLARIION_TRESPASS_PAGE, /* Page code */ 51 0x09, /* Page length - 2 */ 52 0x01, /* Trespass code */ 53 0xff, 0xff, /* Trespass target */ 54 0, 0, 0, 0, 0, 0 /* Reserved bytes / unknown */ 55 }; 56 57 static unsigned char short_trespass[] = { 58 0, 0, 0, 0, 59 CLARIION_TRESPASS_PAGE, /* Page code */ 60 0x02, /* Page length - 2 */ 61 0x01, /* Trespass code */ 62 0xff, /* Trespass target */ 63 }; 64 65 static const char * lun_state[] = 66 { 67 "not bound", 68 "bound", 69 "owned", 70 }; 71 72 struct clariion_dh_data { 73 /* 74 * Flags: 75 * CLARIION_SHORT_TRESPASS 76 * Use short trespass command (FC-series) or the long version 77 * (default for AX/CX CLARiiON arrays). 78 * 79 * CLARIION_HONOR_RESERVATIONS 80 * Whether or not (default) to honor SCSI reservations when 81 * initiating a switch-over. 82 */ 83 unsigned flags; 84 /* 85 * I/O buffer for both MODE_SELECT and INQUIRY commands. 86 */ 87 unsigned char buffer[CLARIION_BUFFER_SIZE]; 88 /* 89 * SCSI sense buffer for commands -- assumes serial issuance 90 * and completion sequence of all commands for same multipath. 91 */ 92 unsigned char sense[SCSI_SENSE_BUFFERSIZE]; 93 unsigned int senselen; 94 /* 95 * LUN state 96 */ 97 int lun_state; 98 /* 99 * SP Port number 100 */ 101 int port; 102 /* 103 * which SP (A=0,B=1,UNBOUND=-1) is the default SP for this 104 * path's mapped LUN 105 */ 106 int default_sp; 107 /* 108 * which SP (A=0,B=1,UNBOUND=-1) is the active SP for this 109 * path's mapped LUN 110 */ 111 int current_sp; 112 }; 113 114 static inline struct clariion_dh_data 115 *get_clariion_data(struct scsi_device *sdev) 116 { 117 struct scsi_dh_data *scsi_dh_data = sdev->scsi_dh_data; 118 BUG_ON(scsi_dh_data == NULL); 119 return ((struct clariion_dh_data *) scsi_dh_data->buf); 120 } 121 122 /* 123 * Parse MODE_SELECT cmd reply. 124 */ 125 static int trespass_endio(struct scsi_device *sdev, char *sense) 126 { 127 int err = SCSI_DH_IO; 128 struct scsi_sense_hdr sshdr; 129 130 if (!scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, &sshdr)) { 131 sdev_printk(KERN_ERR, sdev, "%s: Found valid sense data 0x%2x, " 132 "0x%2x, 0x%2x while sending CLARiiON trespass " 133 "command.\n", CLARIION_NAME, sshdr.sense_key, 134 sshdr.asc, sshdr.ascq); 135 136 if ((sshdr.sense_key == 0x05) && (sshdr.asc == 0x04) && 137 (sshdr.ascq == 0x00)) { 138 /* 139 * Array based copy in progress -- do not send 140 * mode_select or copy will be aborted mid-stream. 141 */ 142 sdev_printk(KERN_INFO, sdev, "%s: Array Based Copy in " 143 "progress while sending CLARiiON trespass " 144 "command.\n", CLARIION_NAME); 145 err = SCSI_DH_DEV_TEMP_BUSY; 146 } else if ((sshdr.sense_key == 0x02) && (sshdr.asc == 0x04) && 147 (sshdr.ascq == 0x03)) { 148 /* 149 * LUN Not Ready - Manual Intervention Required 150 * indicates in-progress ucode upgrade (NDU). 151 */ 152 sdev_printk(KERN_INFO, sdev, "%s: Detected in-progress " 153 "ucode upgrade NDU operation while sending " 154 "CLARiiON trespass command.\n", CLARIION_NAME); 155 err = SCSI_DH_DEV_TEMP_BUSY; 156 } else 157 err = SCSI_DH_DEV_FAILED; 158 } else { 159 sdev_printk(KERN_INFO, sdev, 160 "%s: failed to send MODE SELECT, no sense available\n", 161 CLARIION_NAME); 162 } 163 return err; 164 } 165 166 static int parse_sp_info_reply(struct scsi_device *sdev, 167 struct clariion_dh_data *csdev) 168 { 169 int err = SCSI_DH_OK; 170 171 /* check for in-progress ucode upgrade (NDU) */ 172 if (csdev->buffer[48] != 0) { 173 sdev_printk(KERN_NOTICE, sdev, "%s: Detected in-progress " 174 "ucode upgrade NDU operation while finding " 175 "current active SP.", CLARIION_NAME); 176 err = SCSI_DH_DEV_TEMP_BUSY; 177 goto out; 178 } 179 if (csdev->buffer[4] > 2) { 180 /* Invalid buffer format */ 181 sdev_printk(KERN_NOTICE, sdev, 182 "%s: invalid VPD page 0xC0 format\n", 183 CLARIION_NAME); 184 err = SCSI_DH_NOSYS; 185 goto out; 186 } 187 switch (csdev->buffer[28] & 0x0f) { 188 case 6: 189 sdev_printk(KERN_NOTICE, sdev, 190 "%s: ALUA failover mode detected\n", 191 CLARIION_NAME); 192 break; 193 case 4: 194 /* Linux failover */ 195 break; 196 default: 197 sdev_printk(KERN_WARNING, sdev, 198 "%s: Invalid failover mode %d\n", 199 CLARIION_NAME, csdev->buffer[28] & 0x0f); 200 err = SCSI_DH_NOSYS; 201 goto out; 202 } 203 204 csdev->default_sp = csdev->buffer[5]; 205 csdev->lun_state = csdev->buffer[4]; 206 csdev->current_sp = csdev->buffer[8]; 207 csdev->port = csdev->buffer[7]; 208 209 out: 210 return err; 211 } 212 213 #define emc_default_str "FC (Legacy)" 214 215 static char * parse_sp_model(struct scsi_device *sdev, unsigned char *buffer) 216 { 217 unsigned char len = buffer[4] + 5; 218 char *sp_model = NULL; 219 unsigned char sp_len, serial_len; 220 221 if (len < 160) { 222 sdev_printk(KERN_WARNING, sdev, 223 "%s: Invalid information section length %d\n", 224 CLARIION_NAME, len); 225 /* Check for old FC arrays */ 226 if (!strncmp(buffer + 8, "DGC", 3)) { 227 /* Old FC array, not supporting extended information */ 228 sp_model = emc_default_str; 229 } 230 goto out; 231 } 232 233 /* 234 * Parse extended information for SP model number 235 */ 236 serial_len = buffer[160]; 237 if (serial_len == 0 || serial_len + 161 > len) { 238 sdev_printk(KERN_WARNING, sdev, 239 "%s: Invalid array serial number length %d\n", 240 CLARIION_NAME, serial_len); 241 goto out; 242 } 243 sp_len = buffer[99]; 244 if (sp_len == 0 || serial_len + sp_len + 161 > len) { 245 sdev_printk(KERN_WARNING, sdev, 246 "%s: Invalid model number length %d\n", 247 CLARIION_NAME, sp_len); 248 goto out; 249 } 250 sp_model = &buffer[serial_len + 161]; 251 /* Strip whitespace at the end */ 252 while (sp_len > 1 && sp_model[sp_len - 1] == ' ') 253 sp_len--; 254 255 sp_model[sp_len] = '\0'; 256 257 out: 258 return sp_model; 259 } 260 261 /* 262 * Get block request for REQ_BLOCK_PC command issued to path. Currently 263 * limited to MODE_SELECT (trespass) and INQUIRY (VPD page 0xC0) commands. 264 * 265 * Uses data and sense buffers in hardware handler context structure and 266 * assumes serial servicing of commands, both issuance and completion. 267 */ 268 static struct request *get_req(struct scsi_device *sdev, int cmd, 269 unsigned char *buffer) 270 { 271 struct request *rq; 272 int len = 0; 273 274 rq = blk_get_request(sdev->request_queue, 275 (cmd == MODE_SELECT) ? WRITE : READ, GFP_NOIO); 276 if (!rq) { 277 sdev_printk(KERN_INFO, sdev, "get_req: blk_get_request failed"); 278 return NULL; 279 } 280 281 rq->cmd_len = COMMAND_SIZE(cmd); 282 rq->cmd[0] = cmd; 283 284 switch (cmd) { 285 case MODE_SELECT: 286 len = sizeof(short_trespass); 287 rq->cmd_flags |= REQ_RW; 288 rq->cmd[1] = 0x10; 289 break; 290 case MODE_SELECT_10: 291 len = sizeof(long_trespass); 292 rq->cmd_flags |= REQ_RW; 293 rq->cmd[1] = 0x10; 294 break; 295 case INQUIRY: 296 len = CLARIION_BUFFER_SIZE; 297 memset(buffer, 0, len); 298 break; 299 default: 300 BUG_ON(1); 301 break; 302 } 303 304 rq->cmd[4] = len; 305 rq->cmd_type = REQ_TYPE_BLOCK_PC; 306 rq->cmd_flags |= REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | 307 REQ_FAILFAST_DRIVER; 308 rq->timeout = CLARIION_TIMEOUT; 309 rq->retries = CLARIION_RETRIES; 310 311 if (blk_rq_map_kern(rq->q, rq, buffer, len, GFP_NOIO)) { 312 blk_put_request(rq); 313 return NULL; 314 } 315 316 return rq; 317 } 318 319 static int send_inquiry_cmd(struct scsi_device *sdev, int page, 320 struct clariion_dh_data *csdev) 321 { 322 struct request *rq = get_req(sdev, INQUIRY, csdev->buffer); 323 int err; 324 325 if (!rq) 326 return SCSI_DH_RES_TEMP_UNAVAIL; 327 328 rq->sense = csdev->sense; 329 memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE); 330 rq->sense_len = csdev->senselen = 0; 331 332 rq->cmd[0] = INQUIRY; 333 if (page != 0) { 334 rq->cmd[1] = 1; 335 rq->cmd[2] = page; 336 } 337 err = blk_execute_rq(sdev->request_queue, NULL, rq, 1); 338 if (err == -EIO) { 339 sdev_printk(KERN_INFO, sdev, 340 "%s: failed to send %s INQUIRY: %x\n", 341 CLARIION_NAME, page?"EVPD":"standard", 342 rq->errors); 343 csdev->senselen = rq->sense_len; 344 err = SCSI_DH_IO; 345 } 346 347 blk_put_request(rq); 348 349 return err; 350 } 351 352 static int send_trespass_cmd(struct scsi_device *sdev, 353 struct clariion_dh_data *csdev) 354 { 355 struct request *rq; 356 unsigned char *page22; 357 int err, len, cmd; 358 359 if (csdev->flags & CLARIION_SHORT_TRESPASS) { 360 page22 = short_trespass; 361 if (!(csdev->flags & CLARIION_HONOR_RESERVATIONS)) 362 /* Set Honor Reservations bit */ 363 page22[6] |= 0x80; 364 len = sizeof(short_trespass); 365 cmd = MODE_SELECT; 366 } else { 367 page22 = long_trespass; 368 if (!(csdev->flags & CLARIION_HONOR_RESERVATIONS)) 369 /* Set Honor Reservations bit */ 370 page22[10] |= 0x80; 371 len = sizeof(long_trespass); 372 cmd = MODE_SELECT_10; 373 } 374 BUG_ON((len > CLARIION_BUFFER_SIZE)); 375 memcpy(csdev->buffer, page22, len); 376 377 rq = get_req(sdev, cmd, csdev->buffer); 378 if (!rq) 379 return SCSI_DH_RES_TEMP_UNAVAIL; 380 381 rq->sense = csdev->sense; 382 memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE); 383 rq->sense_len = csdev->senselen = 0; 384 385 err = blk_execute_rq(sdev->request_queue, NULL, rq, 1); 386 if (err == -EIO) { 387 if (rq->sense_len) { 388 err = trespass_endio(sdev, csdev->sense); 389 } else { 390 sdev_printk(KERN_INFO, sdev, 391 "%s: failed to send MODE SELECT: %x\n", 392 CLARIION_NAME, rq->errors); 393 } 394 } 395 396 blk_put_request(rq); 397 398 return err; 399 } 400 401 static int clariion_check_sense(struct scsi_device *sdev, 402 struct scsi_sense_hdr *sense_hdr) 403 { 404 switch (sense_hdr->sense_key) { 405 case NOT_READY: 406 if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x03) 407 /* 408 * LUN Not Ready - Manual Intervention Required 409 * indicates this is a passive path. 410 * 411 * FIXME: However, if this is seen and EVPD C0 412 * indicates that this is due to a NDU in 413 * progress, we should set FAIL_PATH too. 414 * This indicates we might have to do a SCSI 415 * inquiry in the end_io path. Ugh. 416 * 417 * Can return FAILED only when we want the error 418 * recovery process to kick in. 419 */ 420 return SUCCESS; 421 break; 422 case ILLEGAL_REQUEST: 423 if (sense_hdr->asc == 0x25 && sense_hdr->ascq == 0x01) 424 /* 425 * An array based copy is in progress. Do not 426 * fail the path, do not bypass to another PG, 427 * do not retry. Fail the IO immediately. 428 * (Actually this is the same conclusion as in 429 * the default handler, but lets make sure.) 430 * 431 * Can return FAILED only when we want the error 432 * recovery process to kick in. 433 */ 434 return SUCCESS; 435 break; 436 case UNIT_ATTENTION: 437 if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00) 438 /* 439 * Unit Attention Code. This is the first IO 440 * to the new path, so just retry. 441 */ 442 return ADD_TO_MLQUEUE; 443 break; 444 } 445 446 return SCSI_RETURN_NOT_HANDLED; 447 } 448 449 static int clariion_prep_fn(struct scsi_device *sdev, struct request *req) 450 { 451 struct clariion_dh_data *h = get_clariion_data(sdev); 452 int ret = BLKPREP_OK; 453 454 if (h->lun_state != CLARIION_LUN_OWNED) { 455 ret = BLKPREP_KILL; 456 req->cmd_flags |= REQ_QUIET; 457 } 458 return ret; 459 460 } 461 462 static int clariion_std_inquiry(struct scsi_device *sdev, 463 struct clariion_dh_data *csdev) 464 { 465 int err; 466 char *sp_model; 467 468 err = send_inquiry_cmd(sdev, 0, csdev); 469 if (err != SCSI_DH_OK && csdev->senselen) { 470 struct scsi_sense_hdr sshdr; 471 472 if (scsi_normalize_sense(csdev->sense, SCSI_SENSE_BUFFERSIZE, 473 &sshdr)) { 474 sdev_printk(KERN_ERR, sdev, "%s: INQUIRY sense code " 475 "%02x/%02x/%02x\n", CLARIION_NAME, 476 sshdr.sense_key, sshdr.asc, sshdr.ascq); 477 } 478 err = SCSI_DH_IO; 479 goto out; 480 } 481 482 sp_model = parse_sp_model(sdev, csdev->buffer); 483 if (!sp_model) { 484 err = SCSI_DH_DEV_UNSUPP; 485 goto out; 486 } 487 488 /* 489 * FC Series arrays do not support long trespass 490 */ 491 if (!strlen(sp_model) || !strncmp(sp_model, "FC",2)) 492 csdev->flags |= CLARIION_SHORT_TRESPASS; 493 494 sdev_printk(KERN_INFO, sdev, 495 "%s: detected Clariion %s, flags %x\n", 496 CLARIION_NAME, sp_model, csdev->flags); 497 out: 498 return err; 499 } 500 501 static int clariion_send_inquiry(struct scsi_device *sdev, 502 struct clariion_dh_data *csdev) 503 { 504 int err, retry = CLARIION_RETRIES; 505 506 retry: 507 err = send_inquiry_cmd(sdev, 0xC0, csdev); 508 if (err != SCSI_DH_OK && csdev->senselen) { 509 struct scsi_sense_hdr sshdr; 510 511 err = scsi_normalize_sense(csdev->sense, SCSI_SENSE_BUFFERSIZE, 512 &sshdr); 513 if (!err) 514 return SCSI_DH_IO; 515 516 err = clariion_check_sense(sdev, &sshdr); 517 if (retry > 0 && err == ADD_TO_MLQUEUE) { 518 retry--; 519 goto retry; 520 } 521 sdev_printk(KERN_ERR, sdev, "%s: INQUIRY sense code " 522 "%02x/%02x/%02x\n", CLARIION_NAME, 523 sshdr.sense_key, sshdr.asc, sshdr.ascq); 524 err = SCSI_DH_IO; 525 } else { 526 err = parse_sp_info_reply(sdev, csdev); 527 } 528 return err; 529 } 530 531 static int clariion_activate(struct scsi_device *sdev) 532 { 533 struct clariion_dh_data *csdev = get_clariion_data(sdev); 534 int result; 535 536 result = clariion_send_inquiry(sdev, csdev); 537 if (result != SCSI_DH_OK) 538 goto done; 539 540 if (csdev->lun_state == CLARIION_LUN_OWNED) 541 goto done; 542 543 result = send_trespass_cmd(sdev, csdev); 544 if (result != SCSI_DH_OK) 545 goto done; 546 sdev_printk(KERN_INFO, sdev,"%s: %s trespass command sent\n", 547 CLARIION_NAME, 548 csdev->flags&CLARIION_SHORT_TRESPASS?"short":"long" ); 549 550 /* Update status */ 551 result = clariion_send_inquiry(sdev, csdev); 552 if (result != SCSI_DH_OK) 553 goto done; 554 555 done: 556 sdev_printk(KERN_INFO, sdev, 557 "%s: at SP %c Port %d (%s, default SP %c)\n", 558 CLARIION_NAME, csdev->current_sp + 'A', 559 csdev->port, lun_state[csdev->lun_state], 560 csdev->default_sp + 'A'); 561 562 return result; 563 } 564 /* 565 * params - parameters in the following format 566 * "no_of_params\0param1\0param2\0param3\0...\0" 567 * for example, string for 2 parameters with value 10 and 21 568 * is specified as "2\010\021\0". 569 */ 570 static int clariion_set_params(struct scsi_device *sdev, const char *params) 571 { 572 struct clariion_dh_data *csdev = get_clariion_data(sdev); 573 unsigned int hr = 0, st = 0, argc; 574 const char *p = params; 575 int result = SCSI_DH_OK; 576 577 if ((sscanf(params, "%u", &argc) != 1) || (argc != 2)) 578 return -EINVAL; 579 580 while (*p++) 581 ; 582 if ((sscanf(p, "%u", &st) != 1) || (st > 1)) 583 return -EINVAL; 584 585 while (*p++) 586 ; 587 if ((sscanf(p, "%u", &hr) != 1) || (hr > 1)) 588 return -EINVAL; 589 590 if (st) 591 csdev->flags |= CLARIION_SHORT_TRESPASS; 592 else 593 csdev->flags &= ~CLARIION_SHORT_TRESPASS; 594 595 if (hr) 596 csdev->flags |= CLARIION_HONOR_RESERVATIONS; 597 else 598 csdev->flags &= ~CLARIION_HONOR_RESERVATIONS; 599 600 /* 601 * If this path is owned, we have to send a trespass command 602 * with the new parameters. If not, simply return. Next trespass 603 * command would use the parameters. 604 */ 605 if (csdev->lun_state != CLARIION_LUN_OWNED) 606 goto done; 607 608 csdev->lun_state = CLARIION_LUN_UNINITIALIZED; 609 result = send_trespass_cmd(sdev, csdev); 610 if (result != SCSI_DH_OK) 611 goto done; 612 613 /* Update status */ 614 result = clariion_send_inquiry(sdev, csdev); 615 616 done: 617 return result; 618 } 619 620 static const struct scsi_dh_devlist clariion_dev_list[] = { 621 {"DGC", "RAID"}, 622 {"DGC", "DISK"}, 623 {"DGC", "VRAID"}, 624 {NULL, NULL}, 625 }; 626 627 static int clariion_bus_attach(struct scsi_device *sdev); 628 static void clariion_bus_detach(struct scsi_device *sdev); 629 630 static struct scsi_device_handler clariion_dh = { 631 .name = CLARIION_NAME, 632 .module = THIS_MODULE, 633 .devlist = clariion_dev_list, 634 .attach = clariion_bus_attach, 635 .detach = clariion_bus_detach, 636 .check_sense = clariion_check_sense, 637 .activate = clariion_activate, 638 .prep_fn = clariion_prep_fn, 639 .set_params = clariion_set_params, 640 }; 641 642 static int clariion_bus_attach(struct scsi_device *sdev) 643 { 644 struct scsi_dh_data *scsi_dh_data; 645 struct clariion_dh_data *h; 646 unsigned long flags; 647 int err; 648 649 scsi_dh_data = kzalloc(sizeof(struct scsi_device_handler *) 650 + sizeof(*h) , GFP_KERNEL); 651 if (!scsi_dh_data) { 652 sdev_printk(KERN_ERR, sdev, "%s: Attach failed\n", 653 CLARIION_NAME); 654 return -ENOMEM; 655 } 656 657 scsi_dh_data->scsi_dh = &clariion_dh; 658 h = (struct clariion_dh_data *) scsi_dh_data->buf; 659 h->lun_state = CLARIION_LUN_UNINITIALIZED; 660 h->default_sp = CLARIION_UNBOUND_LU; 661 h->current_sp = CLARIION_UNBOUND_LU; 662 663 err = clariion_std_inquiry(sdev, h); 664 if (err != SCSI_DH_OK) 665 goto failed; 666 667 err = clariion_send_inquiry(sdev, h); 668 if (err != SCSI_DH_OK) 669 goto failed; 670 671 if (!try_module_get(THIS_MODULE)) 672 goto failed; 673 674 spin_lock_irqsave(sdev->request_queue->queue_lock, flags); 675 sdev->scsi_dh_data = scsi_dh_data; 676 spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags); 677 678 sdev_printk(KERN_INFO, sdev, 679 "%s: connected to SP %c Port %d (%s, default SP %c)\n", 680 CLARIION_NAME, h->current_sp + 'A', 681 h->port, lun_state[h->lun_state], 682 h->default_sp + 'A'); 683 684 return 0; 685 686 failed: 687 kfree(scsi_dh_data); 688 sdev_printk(KERN_ERR, sdev, "%s: not attached\n", 689 CLARIION_NAME); 690 return -EINVAL; 691 } 692 693 static void clariion_bus_detach(struct scsi_device *sdev) 694 { 695 struct scsi_dh_data *scsi_dh_data; 696 unsigned long flags; 697 698 spin_lock_irqsave(sdev->request_queue->queue_lock, flags); 699 scsi_dh_data = sdev->scsi_dh_data; 700 sdev->scsi_dh_data = NULL; 701 spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags); 702 703 sdev_printk(KERN_NOTICE, sdev, "%s: Detached\n", 704 CLARIION_NAME); 705 706 kfree(scsi_dh_data); 707 module_put(THIS_MODULE); 708 } 709 710 static int __init clariion_init(void) 711 { 712 int r; 713 714 r = scsi_register_device_handler(&clariion_dh); 715 if (r != 0) 716 printk(KERN_ERR "%s: Failed to register scsi device handler.", 717 CLARIION_NAME); 718 return r; 719 } 720 721 static void __exit clariion_exit(void) 722 { 723 scsi_unregister_device_handler(&clariion_dh); 724 } 725 726 module_init(clariion_init); 727 module_exit(clariion_exit); 728 729 MODULE_DESCRIPTION("EMC CX/AX/FC-family driver"); 730 MODULE_AUTHOR("Mike Christie <michaelc@cs.wisc.edu>, Chandra Seetharaman <sekharan@us.ibm.com>"); 731 MODULE_LICENSE("GPL"); 732