1 /* 2 * This file is part of the Chelsio FCoE driver for Linux. 3 * 4 * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved. 5 * 6 * This software is available to you under a choice of one of two 7 * licenses. You may choose to be licensed under the terms of the GNU 8 * General Public License (GPL) Version 2, available from the file 9 * COPYING in the main directory of this source tree, or the 10 * OpenIB.org BSD license below: 11 * 12 * Redistribution and use in source and binary forms, with or 13 * without modification, are permitted provided that the following 14 * conditions are met: 15 * 16 * - Redistributions of source code must retain the above 17 * copyright notice, this list of conditions and the following 18 * disclaimer. 19 * 20 * - Redistributions in binary form must reproduce the above 21 * copyright notice, this list of conditions and the following 22 * disclaimer in the documentation and/or other materials 23 * provided with the distribution. 24 * 25 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 26 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 27 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 28 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS 29 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN 30 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 31 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE 32 * SOFTWARE. 33 */ 34 35 #include <linux/pci.h> 36 #include <linux/pci_regs.h> 37 #include <linux/firmware.h> 38 #include <linux/stddef.h> 39 #include <linux/delay.h> 40 #include <linux/string.h> 41 #include <linux/compiler.h> 42 #include <linux/jiffies.h> 43 #include <linux/kernel.h> 44 #include <linux/log2.h> 45 46 #include "csio_hw.h" 47 #include "csio_lnode.h" 48 #include "csio_rnode.h" 49 50 int csio_dbg_level = 0xFEFF; 51 unsigned int csio_port_mask = 0xf; 52 53 /* Default FW event queue entries. */ 54 static uint32_t csio_evtq_sz = CSIO_EVTQ_SIZE; 55 56 /* Default MSI param level */ 57 int csio_msi = 2; 58 59 /* FCoE function instances */ 60 static int dev_num; 61 62 /* FCoE Adapter types & its description */ 63 static const struct csio_adap_desc csio_t5_fcoe_adapters[] = { 64 {"T580-Dbg 10G", "Chelsio T580-Dbg 10G [FCoE]"}, 65 {"T520-CR 10G", "Chelsio T520-CR 10G [FCoE]"}, 66 {"T522-CR 10G/1G", "Chelsio T522-CR 10G/1G [FCoE]"}, 67 {"T540-CR 10G", "Chelsio T540-CR 10G [FCoE]"}, 68 {"T520-BCH 10G", "Chelsio T520-BCH 10G [FCoE]"}, 69 {"T540-BCH 10G", "Chelsio T540-BCH 10G [FCoE]"}, 70 {"T540-CH 10G", "Chelsio T540-CH 10G [FCoE]"}, 71 {"T520-SO 10G", "Chelsio T520-SO 10G [FCoE]"}, 72 {"T520-CX4 10G", "Chelsio T520-CX4 10G [FCoE]"}, 73 {"T520-BT 10G", "Chelsio T520-BT 10G [FCoE]"}, 74 {"T504-BT 1G", "Chelsio T504-BT 1G [FCoE]"}, 75 {"B520-SR 10G", "Chelsio B520-SR 10G [FCoE]"}, 76 {"B504-BT 1G", "Chelsio B504-BT 1G [FCoE]"}, 77 {"T580-CR 10G", "Chelsio T580-CR 10G [FCoE]"}, 78 {"T540-LP-CR 10G", "Chelsio T540-LP-CR 10G [FCoE]"}, 79 {"AMSTERDAM 10G", "Chelsio AMSTERDAM 10G [FCoE]"}, 80 {"T580-LP-CR 40G", "Chelsio T580-LP-CR 40G [FCoE]"}, 81 {"T520-LL-CR 10G", "Chelsio T520-LL-CR 10G [FCoE]"}, 82 {"T560-CR 40G", "Chelsio T560-CR 40G [FCoE]"}, 83 {"T580-CR 40G", "Chelsio T580-CR 40G [FCoE]"}, 84 {"T580-SO 40G", "Chelsio T580-SO 40G [FCoE]"}, 85 {"T502-BT 1G", "Chelsio T502-BT 1G [FCoE]"} 86 }; 87 88 static void csio_mgmtm_cleanup(struct csio_mgmtm *); 89 static void csio_hw_mbm_cleanup(struct csio_hw *); 90 91 /* State machine forward declarations */ 92 static void csio_hws_uninit(struct csio_hw *, enum csio_hw_ev); 93 static void csio_hws_configuring(struct csio_hw *, enum csio_hw_ev); 94 static void csio_hws_initializing(struct csio_hw *, enum csio_hw_ev); 95 static void csio_hws_ready(struct csio_hw *, enum csio_hw_ev); 96 static void csio_hws_quiescing(struct csio_hw *, enum csio_hw_ev); 97 static void csio_hws_quiesced(struct csio_hw *, enum csio_hw_ev); 98 static void csio_hws_resetting(struct csio_hw *, enum csio_hw_ev); 99 static void csio_hws_removing(struct csio_hw *, enum csio_hw_ev); 100 static void csio_hws_pcierr(struct csio_hw *, enum csio_hw_ev); 101 102 static void csio_hw_initialize(struct csio_hw *hw); 103 static void csio_evtq_stop(struct csio_hw *hw); 104 static void csio_evtq_start(struct csio_hw *hw); 105 106 int csio_is_hw_ready(struct csio_hw *hw) 107 { 108 return csio_match_state(hw, csio_hws_ready); 109 } 110 111 int csio_is_hw_removing(struct csio_hw *hw) 112 { 113 return csio_match_state(hw, csio_hws_removing); 114 } 115 116 117 /* 118 * csio_hw_wait_op_done_val - wait until an operation is completed 119 * @hw: the HW module 120 * @reg: the register to check for completion 121 * @mask: a single-bit field within @reg that indicates completion 122 * @polarity: the value of the field when the operation is completed 123 * @attempts: number of check iterations 124 * @delay: delay in usecs between iterations 125 * @valp: where to store the value of the register at completion time 126 * 127 * Wait until an operation is completed by checking a bit in a register 128 * up to @attempts times. If @valp is not NULL the value of the register 129 * at the time it indicated completion is stored there. Returns 0 if the 130 * operation completes and -EAGAIN otherwise. 131 */ 132 int 133 csio_hw_wait_op_done_val(struct csio_hw *hw, int reg, uint32_t mask, 134 int polarity, int attempts, int delay, uint32_t *valp) 135 { 136 uint32_t val; 137 while (1) { 138 val = csio_rd_reg32(hw, reg); 139 140 if (!!(val & mask) == polarity) { 141 if (valp) 142 *valp = val; 143 return 0; 144 } 145 146 if (--attempts == 0) 147 return -EAGAIN; 148 if (delay) 149 udelay(delay); 150 } 151 } 152 153 /* 154 * csio_hw_tp_wr_bits_indirect - set/clear bits in an indirect TP register 155 * @hw: the adapter 156 * @addr: the indirect TP register address 157 * @mask: specifies the field within the register to modify 158 * @val: new value for the field 159 * 160 * Sets a field of an indirect TP register to the given value. 161 */ 162 void 163 csio_hw_tp_wr_bits_indirect(struct csio_hw *hw, unsigned int addr, 164 unsigned int mask, unsigned int val) 165 { 166 csio_wr_reg32(hw, addr, TP_PIO_ADDR_A); 167 val |= csio_rd_reg32(hw, TP_PIO_DATA_A) & ~mask; 168 csio_wr_reg32(hw, val, TP_PIO_DATA_A); 169 } 170 171 void 172 csio_set_reg_field(struct csio_hw *hw, uint32_t reg, uint32_t mask, 173 uint32_t value) 174 { 175 uint32_t val = csio_rd_reg32(hw, reg) & ~mask; 176 177 csio_wr_reg32(hw, val | value, reg); 178 /* Flush */ 179 csio_rd_reg32(hw, reg); 180 181 } 182 183 static int 184 csio_memory_write(struct csio_hw *hw, int mtype, u32 addr, u32 len, u32 *buf) 185 { 186 return hw->chip_ops->chip_memory_rw(hw, MEMWIN_CSIOSTOR, mtype, 187 addr, len, buf, 0); 188 } 189 190 /* 191 * EEPROM reads take a few tens of us while writes can take a bit over 5 ms. 192 */ 193 #define EEPROM_MAX_RD_POLL 40 194 #define EEPROM_MAX_WR_POLL 6 195 #define EEPROM_STAT_ADDR 0x7bfc 196 #define VPD_BASE 0x400 197 #define VPD_BASE_OLD 0 198 #define VPD_LEN 1024 199 #define VPD_INFO_FLD_HDR_SIZE 3 200 201 /* 202 * csio_hw_seeprom_read - read a serial EEPROM location 203 * @hw: hw to read 204 * @addr: EEPROM virtual address 205 * @data: where to store the read data 206 * 207 * Read a 32-bit word from a location in serial EEPROM using the card's PCI 208 * VPD capability. Note that this function must be called with a virtual 209 * address. 210 */ 211 static int 212 csio_hw_seeprom_read(struct csio_hw *hw, uint32_t addr, uint32_t *data) 213 { 214 uint16_t val = 0; 215 int attempts = EEPROM_MAX_RD_POLL; 216 uint32_t base = hw->params.pci.vpd_cap_addr; 217 218 if (addr >= EEPROMVSIZE || (addr & 3)) 219 return -EINVAL; 220 221 pci_write_config_word(hw->pdev, base + PCI_VPD_ADDR, (uint16_t)addr); 222 223 do { 224 udelay(10); 225 pci_read_config_word(hw->pdev, base + PCI_VPD_ADDR, &val); 226 } while (!(val & PCI_VPD_ADDR_F) && --attempts); 227 228 if (!(val & PCI_VPD_ADDR_F)) { 229 csio_err(hw, "reading EEPROM address 0x%x failed\n", addr); 230 return -EINVAL; 231 } 232 233 pci_read_config_dword(hw->pdev, base + PCI_VPD_DATA, data); 234 *data = le32_to_cpu(*(__le32 *)data); 235 236 return 0; 237 } 238 239 /* 240 * Partial EEPROM Vital Product Data structure. Includes only the ID and 241 * VPD-R sections. 242 */ 243 struct t4_vpd_hdr { 244 u8 id_tag; 245 u8 id_len[2]; 246 u8 id_data[ID_LEN]; 247 u8 vpdr_tag; 248 u8 vpdr_len[2]; 249 }; 250 251 /* 252 * csio_hw_get_vpd_keyword_val - Locates an information field keyword in 253 * the VPD 254 * @v: Pointer to buffered vpd data structure 255 * @kw: The keyword to search for 256 * 257 * Returns the value of the information field keyword or 258 * -EINVAL otherwise. 259 */ 260 static int 261 csio_hw_get_vpd_keyword_val(const struct t4_vpd_hdr *v, const char *kw) 262 { 263 int32_t i; 264 int32_t offset , len; 265 const uint8_t *buf = &v->id_tag; 266 const uint8_t *vpdr_len = &v->vpdr_tag; 267 offset = sizeof(struct t4_vpd_hdr); 268 len = (uint16_t)vpdr_len[1] + ((uint16_t)vpdr_len[2] << 8); 269 270 if (len + sizeof(struct t4_vpd_hdr) > VPD_LEN) 271 return -EINVAL; 272 273 for (i = offset; (i + VPD_INFO_FLD_HDR_SIZE) <= (offset + len);) { 274 if (memcmp(buf + i , kw, 2) == 0) { 275 i += VPD_INFO_FLD_HDR_SIZE; 276 return i; 277 } 278 279 i += VPD_INFO_FLD_HDR_SIZE + buf[i+2]; 280 } 281 282 return -EINVAL; 283 } 284 285 static int 286 csio_pci_capability(struct pci_dev *pdev, int cap, int *pos) 287 { 288 *pos = pci_find_capability(pdev, cap); 289 if (*pos) 290 return 0; 291 292 return -1; 293 } 294 295 /* 296 * csio_hw_get_vpd_params - read VPD parameters from VPD EEPROM 297 * @hw: HW module 298 * @p: where to store the parameters 299 * 300 * Reads card parameters stored in VPD EEPROM. 301 */ 302 static int 303 csio_hw_get_vpd_params(struct csio_hw *hw, struct csio_vpd *p) 304 { 305 int i, ret, ec, sn, addr; 306 uint8_t *vpd, csum; 307 const struct t4_vpd_hdr *v; 308 /* To get around compilation warning from strstrip */ 309 char __always_unused *s; 310 311 if (csio_is_valid_vpd(hw)) 312 return 0; 313 314 ret = csio_pci_capability(hw->pdev, PCI_CAP_ID_VPD, 315 &hw->params.pci.vpd_cap_addr); 316 if (ret) 317 return -EINVAL; 318 319 vpd = kzalloc(VPD_LEN, GFP_ATOMIC); 320 if (vpd == NULL) 321 return -ENOMEM; 322 323 /* 324 * Card information normally starts at VPD_BASE but early cards had 325 * it at 0. 326 */ 327 ret = csio_hw_seeprom_read(hw, VPD_BASE, (uint32_t *)(vpd)); 328 addr = *vpd == 0x82 ? VPD_BASE : VPD_BASE_OLD; 329 330 for (i = 0; i < VPD_LEN; i += 4) { 331 ret = csio_hw_seeprom_read(hw, addr + i, (uint32_t *)(vpd + i)); 332 if (ret) { 333 kfree(vpd); 334 return ret; 335 } 336 } 337 338 /* Reset the VPD flag! */ 339 hw->flags &= (~CSIO_HWF_VPD_VALID); 340 341 v = (const struct t4_vpd_hdr *)vpd; 342 343 #define FIND_VPD_KW(var, name) do { \ 344 var = csio_hw_get_vpd_keyword_val(v, name); \ 345 if (var < 0) { \ 346 csio_err(hw, "missing VPD keyword " name "\n"); \ 347 kfree(vpd); \ 348 return -EINVAL; \ 349 } \ 350 } while (0) 351 352 FIND_VPD_KW(i, "RV"); 353 for (csum = 0; i >= 0; i--) 354 csum += vpd[i]; 355 356 if (csum) { 357 csio_err(hw, "corrupted VPD EEPROM, actual csum %u\n", csum); 358 kfree(vpd); 359 return -EINVAL; 360 } 361 FIND_VPD_KW(ec, "EC"); 362 FIND_VPD_KW(sn, "SN"); 363 #undef FIND_VPD_KW 364 365 memcpy(p->id, v->id_data, ID_LEN); 366 s = strstrip(p->id); 367 memcpy(p->ec, vpd + ec, EC_LEN); 368 s = strstrip(p->ec); 369 i = vpd[sn - VPD_INFO_FLD_HDR_SIZE + 2]; 370 memcpy(p->sn, vpd + sn, min(i, SERNUM_LEN)); 371 s = strstrip(p->sn); 372 373 csio_valid_vpd_copied(hw); 374 375 kfree(vpd); 376 return 0; 377 } 378 379 /* 380 * csio_hw_sf1_read - read data from the serial flash 381 * @hw: the HW module 382 * @byte_cnt: number of bytes to read 383 * @cont: whether another operation will be chained 384 * @lock: whether to lock SF for PL access only 385 * @valp: where to store the read data 386 * 387 * Reads up to 4 bytes of data from the serial flash. The location of 388 * the read needs to be specified prior to calling this by issuing the 389 * appropriate commands to the serial flash. 390 */ 391 static int 392 csio_hw_sf1_read(struct csio_hw *hw, uint32_t byte_cnt, int32_t cont, 393 int32_t lock, uint32_t *valp) 394 { 395 int ret; 396 397 if (!byte_cnt || byte_cnt > 4) 398 return -EINVAL; 399 if (csio_rd_reg32(hw, SF_OP_A) & SF_BUSY_F) 400 return -EBUSY; 401 402 csio_wr_reg32(hw, SF_LOCK_V(lock) | SF_CONT_V(cont) | 403 BYTECNT_V(byte_cnt - 1), SF_OP_A); 404 ret = csio_hw_wait_op_done_val(hw, SF_OP_A, SF_BUSY_F, 0, SF_ATTEMPTS, 405 10, NULL); 406 if (!ret) 407 *valp = csio_rd_reg32(hw, SF_DATA_A); 408 return ret; 409 } 410 411 /* 412 * csio_hw_sf1_write - write data to the serial flash 413 * @hw: the HW module 414 * @byte_cnt: number of bytes to write 415 * @cont: whether another operation will be chained 416 * @lock: whether to lock SF for PL access only 417 * @val: value to write 418 * 419 * Writes up to 4 bytes of data to the serial flash. The location of 420 * the write needs to be specified prior to calling this by issuing the 421 * appropriate commands to the serial flash. 422 */ 423 static int 424 csio_hw_sf1_write(struct csio_hw *hw, uint32_t byte_cnt, uint32_t cont, 425 int32_t lock, uint32_t val) 426 { 427 if (!byte_cnt || byte_cnt > 4) 428 return -EINVAL; 429 if (csio_rd_reg32(hw, SF_OP_A) & SF_BUSY_F) 430 return -EBUSY; 431 432 csio_wr_reg32(hw, val, SF_DATA_A); 433 csio_wr_reg32(hw, SF_CONT_V(cont) | BYTECNT_V(byte_cnt - 1) | 434 OP_V(1) | SF_LOCK_V(lock), SF_OP_A); 435 436 return csio_hw_wait_op_done_val(hw, SF_OP_A, SF_BUSY_F, 0, SF_ATTEMPTS, 437 10, NULL); 438 } 439 440 /* 441 * csio_hw_flash_wait_op - wait for a flash operation to complete 442 * @hw: the HW module 443 * @attempts: max number of polls of the status register 444 * @delay: delay between polls in ms 445 * 446 * Wait for a flash operation to complete by polling the status register. 447 */ 448 static int 449 csio_hw_flash_wait_op(struct csio_hw *hw, int32_t attempts, int32_t delay) 450 { 451 int ret; 452 uint32_t status; 453 454 while (1) { 455 ret = csio_hw_sf1_write(hw, 1, 1, 1, SF_RD_STATUS); 456 if (ret != 0) 457 return ret; 458 459 ret = csio_hw_sf1_read(hw, 1, 0, 1, &status); 460 if (ret != 0) 461 return ret; 462 463 if (!(status & 1)) 464 return 0; 465 if (--attempts == 0) 466 return -EAGAIN; 467 if (delay) 468 msleep(delay); 469 } 470 } 471 472 /* 473 * csio_hw_read_flash - read words from serial flash 474 * @hw: the HW module 475 * @addr: the start address for the read 476 * @nwords: how many 32-bit words to read 477 * @data: where to store the read data 478 * @byte_oriented: whether to store data as bytes or as words 479 * 480 * Read the specified number of 32-bit words from the serial flash. 481 * If @byte_oriented is set the read data is stored as a byte array 482 * (i.e., big-endian), otherwise as 32-bit words in the platform's 483 * natural endianess. 484 */ 485 static int 486 csio_hw_read_flash(struct csio_hw *hw, uint32_t addr, uint32_t nwords, 487 uint32_t *data, int32_t byte_oriented) 488 { 489 int ret; 490 491 if (addr + nwords * sizeof(uint32_t) > hw->params.sf_size || (addr & 3)) 492 return -EINVAL; 493 494 addr = swab32(addr) | SF_RD_DATA_FAST; 495 496 ret = csio_hw_sf1_write(hw, 4, 1, 0, addr); 497 if (ret != 0) 498 return ret; 499 500 ret = csio_hw_sf1_read(hw, 1, 1, 0, data); 501 if (ret != 0) 502 return ret; 503 504 for ( ; nwords; nwords--, data++) { 505 ret = csio_hw_sf1_read(hw, 4, nwords > 1, nwords == 1, data); 506 if (nwords == 1) 507 csio_wr_reg32(hw, 0, SF_OP_A); /* unlock SF */ 508 if (ret) 509 return ret; 510 if (byte_oriented) 511 *data = (__force __u32) htonl(*data); 512 } 513 return 0; 514 } 515 516 /* 517 * csio_hw_write_flash - write up to a page of data to the serial flash 518 * @hw: the hw 519 * @addr: the start address to write 520 * @n: length of data to write in bytes 521 * @data: the data to write 522 * 523 * Writes up to a page of data (256 bytes) to the serial flash starting 524 * at the given address. All the data must be written to the same page. 525 */ 526 static int 527 csio_hw_write_flash(struct csio_hw *hw, uint32_t addr, 528 uint32_t n, const uint8_t *data) 529 { 530 int ret = -EINVAL; 531 uint32_t buf[64]; 532 uint32_t i, c, left, val, offset = addr & 0xff; 533 534 if (addr >= hw->params.sf_size || offset + n > SF_PAGE_SIZE) 535 return -EINVAL; 536 537 val = swab32(addr) | SF_PROG_PAGE; 538 539 ret = csio_hw_sf1_write(hw, 1, 0, 1, SF_WR_ENABLE); 540 if (ret != 0) 541 goto unlock; 542 543 ret = csio_hw_sf1_write(hw, 4, 1, 1, val); 544 if (ret != 0) 545 goto unlock; 546 547 for (left = n; left; left -= c) { 548 c = min(left, 4U); 549 for (val = 0, i = 0; i < c; ++i) 550 val = (val << 8) + *data++; 551 552 ret = csio_hw_sf1_write(hw, c, c != left, 1, val); 553 if (ret) 554 goto unlock; 555 } 556 ret = csio_hw_flash_wait_op(hw, 8, 1); 557 if (ret) 558 goto unlock; 559 560 csio_wr_reg32(hw, 0, SF_OP_A); /* unlock SF */ 561 562 /* Read the page to verify the write succeeded */ 563 ret = csio_hw_read_flash(hw, addr & ~0xff, ARRAY_SIZE(buf), buf, 1); 564 if (ret) 565 return ret; 566 567 if (memcmp(data - n, (uint8_t *)buf + offset, n)) { 568 csio_err(hw, 569 "failed to correctly write the flash page at %#x\n", 570 addr); 571 return -EINVAL; 572 } 573 574 return 0; 575 576 unlock: 577 csio_wr_reg32(hw, 0, SF_OP_A); /* unlock SF */ 578 return ret; 579 } 580 581 /* 582 * csio_hw_flash_erase_sectors - erase a range of flash sectors 583 * @hw: the HW module 584 * @start: the first sector to erase 585 * @end: the last sector to erase 586 * 587 * Erases the sectors in the given inclusive range. 588 */ 589 static int 590 csio_hw_flash_erase_sectors(struct csio_hw *hw, int32_t start, int32_t end) 591 { 592 int ret = 0; 593 594 while (start <= end) { 595 596 ret = csio_hw_sf1_write(hw, 1, 0, 1, SF_WR_ENABLE); 597 if (ret != 0) 598 goto out; 599 600 ret = csio_hw_sf1_write(hw, 4, 0, 1, 601 SF_ERASE_SECTOR | (start << 8)); 602 if (ret != 0) 603 goto out; 604 605 ret = csio_hw_flash_wait_op(hw, 14, 500); 606 if (ret != 0) 607 goto out; 608 609 start++; 610 } 611 out: 612 if (ret) 613 csio_err(hw, "erase of flash sector %d failed, error %d\n", 614 start, ret); 615 csio_wr_reg32(hw, 0, SF_OP_A); /* unlock SF */ 616 return 0; 617 } 618 619 static void 620 csio_hw_print_fw_version(struct csio_hw *hw, char *str) 621 { 622 csio_info(hw, "%s: %u.%u.%u.%u\n", str, 623 FW_HDR_FW_VER_MAJOR_G(hw->fwrev), 624 FW_HDR_FW_VER_MINOR_G(hw->fwrev), 625 FW_HDR_FW_VER_MICRO_G(hw->fwrev), 626 FW_HDR_FW_VER_BUILD_G(hw->fwrev)); 627 } 628 629 /* 630 * csio_hw_get_fw_version - read the firmware version 631 * @hw: HW module 632 * @vers: where to place the version 633 * 634 * Reads the FW version from flash. 635 */ 636 static int 637 csio_hw_get_fw_version(struct csio_hw *hw, uint32_t *vers) 638 { 639 return csio_hw_read_flash(hw, FLASH_FW_START + 640 offsetof(struct fw_hdr, fw_ver), 1, 641 vers, 0); 642 } 643 644 /* 645 * csio_hw_get_tp_version - read the TP microcode version 646 * @hw: HW module 647 * @vers: where to place the version 648 * 649 * Reads the TP microcode version from flash. 650 */ 651 static int 652 csio_hw_get_tp_version(struct csio_hw *hw, u32 *vers) 653 { 654 return csio_hw_read_flash(hw, FLASH_FW_START + 655 offsetof(struct fw_hdr, tp_microcode_ver), 1, 656 vers, 0); 657 } 658 659 /* 660 * csio_hw_fw_dload - download firmware. 661 * @hw: HW module 662 * @fw_data: firmware image to write. 663 * @size: image size 664 * 665 * Write the supplied firmware image to the card's serial flash. 666 */ 667 static int 668 csio_hw_fw_dload(struct csio_hw *hw, uint8_t *fw_data, uint32_t size) 669 { 670 uint32_t csum; 671 int32_t addr; 672 int ret; 673 uint32_t i; 674 uint8_t first_page[SF_PAGE_SIZE]; 675 const __be32 *p = (const __be32 *)fw_data; 676 struct fw_hdr *hdr = (struct fw_hdr *)fw_data; 677 uint32_t sf_sec_size; 678 679 if ((!hw->params.sf_size) || (!hw->params.sf_nsec)) { 680 csio_err(hw, "Serial Flash data invalid\n"); 681 return -EINVAL; 682 } 683 684 if (!size) { 685 csio_err(hw, "FW image has no data\n"); 686 return -EINVAL; 687 } 688 689 if (size & 511) { 690 csio_err(hw, "FW image size not multiple of 512 bytes\n"); 691 return -EINVAL; 692 } 693 694 if (ntohs(hdr->len512) * 512 != size) { 695 csio_err(hw, "FW image size differs from size in FW header\n"); 696 return -EINVAL; 697 } 698 699 if (size > FLASH_FW_MAX_SIZE) { 700 csio_err(hw, "FW image too large, max is %u bytes\n", 701 FLASH_FW_MAX_SIZE); 702 return -EINVAL; 703 } 704 705 for (csum = 0, i = 0; i < size / sizeof(csum); i++) 706 csum += ntohl(p[i]); 707 708 if (csum != 0xffffffff) { 709 csio_err(hw, "corrupted firmware image, checksum %#x\n", csum); 710 return -EINVAL; 711 } 712 713 sf_sec_size = hw->params.sf_size / hw->params.sf_nsec; 714 i = DIV_ROUND_UP(size, sf_sec_size); /* # of sectors spanned */ 715 716 csio_dbg(hw, "Erasing sectors... start:%d end:%d\n", 717 FLASH_FW_START_SEC, FLASH_FW_START_SEC + i - 1); 718 719 ret = csio_hw_flash_erase_sectors(hw, FLASH_FW_START_SEC, 720 FLASH_FW_START_SEC + i - 1); 721 if (ret) { 722 csio_err(hw, "Flash Erase failed\n"); 723 goto out; 724 } 725 726 /* 727 * We write the correct version at the end so the driver can see a bad 728 * version if the FW write fails. Start by writing a copy of the 729 * first page with a bad version. 730 */ 731 memcpy(first_page, fw_data, SF_PAGE_SIZE); 732 ((struct fw_hdr *)first_page)->fw_ver = htonl(0xffffffff); 733 ret = csio_hw_write_flash(hw, FLASH_FW_START, SF_PAGE_SIZE, first_page); 734 if (ret) 735 goto out; 736 737 csio_dbg(hw, "Writing Flash .. start:%d end:%d\n", 738 FW_IMG_START, FW_IMG_START + size); 739 740 addr = FLASH_FW_START; 741 for (size -= SF_PAGE_SIZE; size; size -= SF_PAGE_SIZE) { 742 addr += SF_PAGE_SIZE; 743 fw_data += SF_PAGE_SIZE; 744 ret = csio_hw_write_flash(hw, addr, SF_PAGE_SIZE, fw_data); 745 if (ret) 746 goto out; 747 } 748 749 ret = csio_hw_write_flash(hw, 750 FLASH_FW_START + 751 offsetof(struct fw_hdr, fw_ver), 752 sizeof(hdr->fw_ver), 753 (const uint8_t *)&hdr->fw_ver); 754 755 out: 756 if (ret) 757 csio_err(hw, "firmware download failed, error %d\n", ret); 758 return ret; 759 } 760 761 static int 762 csio_hw_get_flash_params(struct csio_hw *hw) 763 { 764 /* Table for non-Numonix supported flash parts. Numonix parts are left 765 * to the preexisting code. All flash parts have 64KB sectors. 766 */ 767 static struct flash_desc { 768 u32 vendor_and_model_id; 769 u32 size_mb; 770 } supported_flash[] = { 771 { 0x150201, 4 << 20 }, /* Spansion 4MB S25FL032P */ 772 }; 773 774 u32 part, manufacturer; 775 u32 density, size = 0; 776 u32 flashid = 0; 777 int ret; 778 779 ret = csio_hw_sf1_write(hw, 1, 1, 0, SF_RD_ID); 780 if (!ret) 781 ret = csio_hw_sf1_read(hw, 3, 0, 1, &flashid); 782 csio_wr_reg32(hw, 0, SF_OP_A); /* unlock SF */ 783 if (ret) 784 return ret; 785 786 /* Check to see if it's one of our non-standard supported Flash parts. 787 */ 788 for (part = 0; part < ARRAY_SIZE(supported_flash); part++) 789 if (supported_flash[part].vendor_and_model_id == flashid) { 790 hw->params.sf_size = supported_flash[part].size_mb; 791 hw->params.sf_nsec = 792 hw->params.sf_size / SF_SEC_SIZE; 793 goto found; 794 } 795 796 /* Decode Flash part size. The code below looks repetitive with 797 * common encodings, but that's not guaranteed in the JEDEC 798 * specification for the Read JEDEC ID command. The only thing that 799 * we're guaranteed by the JEDEC specification is where the 800 * Manufacturer ID is in the returned result. After that each 801 * Manufacturer ~could~ encode things completely differently. 802 * Note, all Flash parts must have 64KB sectors. 803 */ 804 manufacturer = flashid & 0xff; 805 switch (manufacturer) { 806 case 0x20: { /* Micron/Numonix */ 807 /* This Density -> Size decoding table is taken from Micron 808 * Data Sheets. 809 */ 810 density = (flashid >> 16) & 0xff; 811 switch (density) { 812 case 0x14 ... 0x19: /* 1MB - 32MB */ 813 size = 1 << density; 814 break; 815 case 0x20: /* 64MB */ 816 size = 1 << 26; 817 break; 818 case 0x21: /* 128MB */ 819 size = 1 << 27; 820 break; 821 case 0x22: /* 256MB */ 822 size = 1 << 28; 823 } 824 break; 825 } 826 case 0x9d: { /* ISSI -- Integrated Silicon Solution, Inc. */ 827 /* This Density -> Size decoding table is taken from ISSI 828 * Data Sheets. 829 */ 830 density = (flashid >> 16) & 0xff; 831 switch (density) { 832 case 0x16: /* 32 MB */ 833 size = 1 << 25; 834 break; 835 case 0x17: /* 64MB */ 836 size = 1 << 26; 837 } 838 break; 839 } 840 case 0xc2: /* Macronix */ 841 case 0xef: /* Winbond */ { 842 /* This Density -> Size decoding table is taken from 843 * Macronix and Winbond Data Sheets. 844 */ 845 density = (flashid >> 16) & 0xff; 846 switch (density) { 847 case 0x17: /* 8MB */ 848 case 0x18: /* 16MB */ 849 size = 1 << density; 850 } 851 } 852 } 853 854 /* If we didn't recognize the FLASH part, that's no real issue: the 855 * Hardware/Software contract says that Hardware will _*ALWAYS*_ 856 * use a FLASH part which is at least 4MB in size and has 64KB 857 * sectors. The unrecognized FLASH part is likely to be much larger 858 * than 4MB, but that's all we really need. 859 */ 860 if (size == 0) { 861 csio_warn(hw, "Unknown Flash Part, ID = %#x, assuming 4MB\n", 862 flashid); 863 size = 1 << 22; 864 } 865 866 /* Store decoded Flash size */ 867 hw->params.sf_size = size; 868 hw->params.sf_nsec = size / SF_SEC_SIZE; 869 870 found: 871 if (hw->params.sf_size < FLASH_MIN_SIZE) 872 csio_warn(hw, "WARNING: Flash Part ID %#x, size %#x < %#x\n", 873 flashid, hw->params.sf_size, FLASH_MIN_SIZE); 874 return 0; 875 } 876 877 /*****************************************************************************/ 878 /* HW State machine assists */ 879 /*****************************************************************************/ 880 881 static int 882 csio_hw_dev_ready(struct csio_hw *hw) 883 { 884 uint32_t reg; 885 int cnt = 6; 886 int src_pf; 887 888 while (((reg = csio_rd_reg32(hw, PL_WHOAMI_A)) == 0xFFFFFFFF) && 889 (--cnt != 0)) 890 mdelay(100); 891 892 if (csio_is_t5(hw->pdev->device & CSIO_HW_CHIP_MASK)) 893 src_pf = SOURCEPF_G(reg); 894 else 895 src_pf = T6_SOURCEPF_G(reg); 896 897 if ((cnt == 0) && (((int32_t)(src_pf) < 0) || 898 (src_pf >= CSIO_MAX_PFN))) { 899 csio_err(hw, "PL_WHOAMI returned 0x%x, cnt:%d\n", reg, cnt); 900 return -EIO; 901 } 902 903 hw->pfn = src_pf; 904 905 return 0; 906 } 907 908 /* 909 * csio_do_hello - Perform the HELLO FW Mailbox command and process response. 910 * @hw: HW module 911 * @state: Device state 912 * 913 * FW_HELLO_CMD has to be polled for completion. 914 */ 915 static int 916 csio_do_hello(struct csio_hw *hw, enum csio_dev_state *state) 917 { 918 struct csio_mb *mbp; 919 int rv = 0; 920 enum fw_retval retval; 921 uint8_t mpfn; 922 char state_str[16]; 923 int retries = FW_CMD_HELLO_RETRIES; 924 925 memset(state_str, 0, sizeof(state_str)); 926 927 mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); 928 if (!mbp) { 929 rv = -ENOMEM; 930 CSIO_INC_STATS(hw, n_err_nomem); 931 goto out; 932 } 933 934 retry: 935 csio_mb_hello(hw, mbp, CSIO_MB_DEFAULT_TMO, hw->pfn, 936 hw->pfn, CSIO_MASTER_MAY, NULL); 937 938 rv = csio_mb_issue(hw, mbp); 939 if (rv) { 940 csio_err(hw, "failed to issue HELLO cmd. ret:%d.\n", rv); 941 goto out_free_mb; 942 } 943 944 csio_mb_process_hello_rsp(hw, mbp, &retval, state, &mpfn); 945 if (retval != FW_SUCCESS) { 946 csio_err(hw, "HELLO cmd failed with ret: %d\n", retval); 947 rv = -EINVAL; 948 goto out_free_mb; 949 } 950 951 /* Firmware has designated us to be master */ 952 if (hw->pfn == mpfn) { 953 hw->flags |= CSIO_HWF_MASTER; 954 } else if (*state == CSIO_DEV_STATE_UNINIT) { 955 /* 956 * If we're not the Master PF then we need to wait around for 957 * the Master PF Driver to finish setting up the adapter. 958 * 959 * Note that we also do this wait if we're a non-Master-capable 960 * PF and there is no current Master PF; a Master PF may show up 961 * momentarily and we wouldn't want to fail pointlessly. (This 962 * can happen when an OS loads lots of different drivers rapidly 963 * at the same time). In this case, the Master PF returned by 964 * the firmware will be PCIE_FW_MASTER_MASK so the test below 965 * will work ... 966 */ 967 968 int waiting = FW_CMD_HELLO_TIMEOUT; 969 970 /* 971 * Wait for the firmware to either indicate an error or 972 * initialized state. If we see either of these we bail out 973 * and report the issue to the caller. If we exhaust the 974 * "hello timeout" and we haven't exhausted our retries, try 975 * again. Otherwise bail with a timeout error. 976 */ 977 for (;;) { 978 uint32_t pcie_fw; 979 980 spin_unlock_irq(&hw->lock); 981 msleep(50); 982 spin_lock_irq(&hw->lock); 983 waiting -= 50; 984 985 /* 986 * If neither Error nor Initialized are indicated 987 * by the firmware keep waiting till we exhaust our 988 * timeout ... and then retry if we haven't exhausted 989 * our retries ... 990 */ 991 pcie_fw = csio_rd_reg32(hw, PCIE_FW_A); 992 if (!(pcie_fw & (PCIE_FW_ERR_F|PCIE_FW_INIT_F))) { 993 if (waiting <= 0) { 994 if (retries-- > 0) 995 goto retry; 996 997 rv = -ETIMEDOUT; 998 break; 999 } 1000 continue; 1001 } 1002 1003 /* 1004 * We either have an Error or Initialized condition 1005 * report errors preferentially. 1006 */ 1007 if (state) { 1008 if (pcie_fw & PCIE_FW_ERR_F) { 1009 *state = CSIO_DEV_STATE_ERR; 1010 rv = -ETIMEDOUT; 1011 } else if (pcie_fw & PCIE_FW_INIT_F) 1012 *state = CSIO_DEV_STATE_INIT; 1013 } 1014 1015 /* 1016 * If we arrived before a Master PF was selected and 1017 * there's not a valid Master PF, grab its identity 1018 * for our caller. 1019 */ 1020 if (mpfn == PCIE_FW_MASTER_M && 1021 (pcie_fw & PCIE_FW_MASTER_VLD_F)) 1022 mpfn = PCIE_FW_MASTER_G(pcie_fw); 1023 break; 1024 } 1025 hw->flags &= ~CSIO_HWF_MASTER; 1026 } 1027 1028 switch (*state) { 1029 case CSIO_DEV_STATE_UNINIT: 1030 strcpy(state_str, "Initializing"); 1031 break; 1032 case CSIO_DEV_STATE_INIT: 1033 strcpy(state_str, "Initialized"); 1034 break; 1035 case CSIO_DEV_STATE_ERR: 1036 strcpy(state_str, "Error"); 1037 break; 1038 default: 1039 strcpy(state_str, "Unknown"); 1040 break; 1041 } 1042 1043 if (hw->pfn == mpfn) 1044 csio_info(hw, "PF: %d, Coming up as MASTER, HW state: %s\n", 1045 hw->pfn, state_str); 1046 else 1047 csio_info(hw, 1048 "PF: %d, Coming up as SLAVE, Master PF: %d, HW state: %s\n", 1049 hw->pfn, mpfn, state_str); 1050 1051 out_free_mb: 1052 mempool_free(mbp, hw->mb_mempool); 1053 out: 1054 return rv; 1055 } 1056 1057 /* 1058 * csio_do_bye - Perform the BYE FW Mailbox command and process response. 1059 * @hw: HW module 1060 * 1061 */ 1062 static int 1063 csio_do_bye(struct csio_hw *hw) 1064 { 1065 struct csio_mb *mbp; 1066 enum fw_retval retval; 1067 1068 mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); 1069 if (!mbp) { 1070 CSIO_INC_STATS(hw, n_err_nomem); 1071 return -ENOMEM; 1072 } 1073 1074 csio_mb_bye(hw, mbp, CSIO_MB_DEFAULT_TMO, NULL); 1075 1076 if (csio_mb_issue(hw, mbp)) { 1077 csio_err(hw, "Issue of BYE command failed\n"); 1078 mempool_free(mbp, hw->mb_mempool); 1079 return -EINVAL; 1080 } 1081 1082 retval = csio_mb_fw_retval(mbp); 1083 if (retval != FW_SUCCESS) { 1084 mempool_free(mbp, hw->mb_mempool); 1085 return -EINVAL; 1086 } 1087 1088 mempool_free(mbp, hw->mb_mempool); 1089 1090 return 0; 1091 } 1092 1093 /* 1094 * csio_do_reset- Perform the device reset. 1095 * @hw: HW module 1096 * @fw_rst: FW reset 1097 * 1098 * If fw_rst is set, issues FW reset mbox cmd otherwise 1099 * does PIO reset. 1100 * Performs reset of the function. 1101 */ 1102 static int 1103 csio_do_reset(struct csio_hw *hw, bool fw_rst) 1104 { 1105 struct csio_mb *mbp; 1106 enum fw_retval retval; 1107 1108 if (!fw_rst) { 1109 /* PIO reset */ 1110 csio_wr_reg32(hw, PIORSTMODE_F | PIORST_F, PL_RST_A); 1111 mdelay(2000); 1112 return 0; 1113 } 1114 1115 mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); 1116 if (!mbp) { 1117 CSIO_INC_STATS(hw, n_err_nomem); 1118 return -ENOMEM; 1119 } 1120 1121 csio_mb_reset(hw, mbp, CSIO_MB_DEFAULT_TMO, 1122 PIORSTMODE_F | PIORST_F, 0, NULL); 1123 1124 if (csio_mb_issue(hw, mbp)) { 1125 csio_err(hw, "Issue of RESET command failed.n"); 1126 mempool_free(mbp, hw->mb_mempool); 1127 return -EINVAL; 1128 } 1129 1130 retval = csio_mb_fw_retval(mbp); 1131 if (retval != FW_SUCCESS) { 1132 csio_err(hw, "RESET cmd failed with ret:0x%x.\n", retval); 1133 mempool_free(mbp, hw->mb_mempool); 1134 return -EINVAL; 1135 } 1136 1137 mempool_free(mbp, hw->mb_mempool); 1138 1139 return 0; 1140 } 1141 1142 static int 1143 csio_hw_validate_caps(struct csio_hw *hw, struct csio_mb *mbp) 1144 { 1145 struct fw_caps_config_cmd *rsp = (struct fw_caps_config_cmd *)mbp->mb; 1146 uint16_t caps; 1147 1148 caps = ntohs(rsp->fcoecaps); 1149 1150 if (!(caps & FW_CAPS_CONFIG_FCOE_INITIATOR)) { 1151 csio_err(hw, "No FCoE Initiator capability in the firmware.\n"); 1152 return -EINVAL; 1153 } 1154 1155 if (!(caps & FW_CAPS_CONFIG_FCOE_CTRL_OFLD)) { 1156 csio_err(hw, "No FCoE Control Offload capability\n"); 1157 return -EINVAL; 1158 } 1159 1160 return 0; 1161 } 1162 1163 /* 1164 * csio_hw_fw_halt - issue a reset/halt to FW and put uP into RESET 1165 * @hw: the HW module 1166 * @mbox: mailbox to use for the FW RESET command (if desired) 1167 * @force: force uP into RESET even if FW RESET command fails 1168 * 1169 * Issues a RESET command to firmware (if desired) with a HALT indication 1170 * and then puts the microprocessor into RESET state. The RESET command 1171 * will only be issued if a legitimate mailbox is provided (mbox <= 1172 * PCIE_FW_MASTER_MASK). 1173 * 1174 * This is generally used in order for the host to safely manipulate the 1175 * adapter without fear of conflicting with whatever the firmware might 1176 * be doing. The only way out of this state is to RESTART the firmware 1177 * ... 1178 */ 1179 static int 1180 csio_hw_fw_halt(struct csio_hw *hw, uint32_t mbox, int32_t force) 1181 { 1182 enum fw_retval retval = 0; 1183 1184 /* 1185 * If a legitimate mailbox is provided, issue a RESET command 1186 * with a HALT indication. 1187 */ 1188 if (mbox <= PCIE_FW_MASTER_M) { 1189 struct csio_mb *mbp; 1190 1191 mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); 1192 if (!mbp) { 1193 CSIO_INC_STATS(hw, n_err_nomem); 1194 return -ENOMEM; 1195 } 1196 1197 csio_mb_reset(hw, mbp, CSIO_MB_DEFAULT_TMO, 1198 PIORSTMODE_F | PIORST_F, FW_RESET_CMD_HALT_F, 1199 NULL); 1200 1201 if (csio_mb_issue(hw, mbp)) { 1202 csio_err(hw, "Issue of RESET command failed!\n"); 1203 mempool_free(mbp, hw->mb_mempool); 1204 return -EINVAL; 1205 } 1206 1207 retval = csio_mb_fw_retval(mbp); 1208 mempool_free(mbp, hw->mb_mempool); 1209 } 1210 1211 /* 1212 * Normally we won't complete the operation if the firmware RESET 1213 * command fails but if our caller insists we'll go ahead and put the 1214 * uP into RESET. This can be useful if the firmware is hung or even 1215 * missing ... We'll have to take the risk of putting the uP into 1216 * RESET without the cooperation of firmware in that case. 1217 * 1218 * We also force the firmware's HALT flag to be on in case we bypassed 1219 * the firmware RESET command above or we're dealing with old firmware 1220 * which doesn't have the HALT capability. This will serve as a flag 1221 * for the incoming firmware to know that it's coming out of a HALT 1222 * rather than a RESET ... if it's new enough to understand that ... 1223 */ 1224 if (retval == 0 || force) { 1225 csio_set_reg_field(hw, CIM_BOOT_CFG_A, UPCRST_F, UPCRST_F); 1226 csio_set_reg_field(hw, PCIE_FW_A, PCIE_FW_HALT_F, 1227 PCIE_FW_HALT_F); 1228 } 1229 1230 /* 1231 * And we always return the result of the firmware RESET command 1232 * even when we force the uP into RESET ... 1233 */ 1234 return retval ? -EINVAL : 0; 1235 } 1236 1237 /* 1238 * csio_hw_fw_restart - restart the firmware by taking the uP out of RESET 1239 * @hw: the HW module 1240 * @reset: if we want to do a RESET to restart things 1241 * 1242 * Restart firmware previously halted by csio_hw_fw_halt(). On successful 1243 * return the previous PF Master remains as the new PF Master and there 1244 * is no need to issue a new HELLO command, etc. 1245 * 1246 * We do this in two ways: 1247 * 1248 * 1. If we're dealing with newer firmware we'll simply want to take 1249 * the chip's microprocessor out of RESET. This will cause the 1250 * firmware to start up from its start vector. And then we'll loop 1251 * until the firmware indicates it's started again (PCIE_FW.HALT 1252 * reset to 0) or we timeout. 1253 * 1254 * 2. If we're dealing with older firmware then we'll need to RESET 1255 * the chip since older firmware won't recognize the PCIE_FW.HALT 1256 * flag and automatically RESET itself on startup. 1257 */ 1258 static int 1259 csio_hw_fw_restart(struct csio_hw *hw, uint32_t mbox, int32_t reset) 1260 { 1261 if (reset) { 1262 /* 1263 * Since we're directing the RESET instead of the firmware 1264 * doing it automatically, we need to clear the PCIE_FW.HALT 1265 * bit. 1266 */ 1267 csio_set_reg_field(hw, PCIE_FW_A, PCIE_FW_HALT_F, 0); 1268 1269 /* 1270 * If we've been given a valid mailbox, first try to get the 1271 * firmware to do the RESET. If that works, great and we can 1272 * return success. Otherwise, if we haven't been given a 1273 * valid mailbox or the RESET command failed, fall back to 1274 * hitting the chip with a hammer. 1275 */ 1276 if (mbox <= PCIE_FW_MASTER_M) { 1277 csio_set_reg_field(hw, CIM_BOOT_CFG_A, UPCRST_F, 0); 1278 msleep(100); 1279 if (csio_do_reset(hw, true) == 0) 1280 return 0; 1281 } 1282 1283 csio_wr_reg32(hw, PIORSTMODE_F | PIORST_F, PL_RST_A); 1284 msleep(2000); 1285 } else { 1286 int ms; 1287 1288 csio_set_reg_field(hw, CIM_BOOT_CFG_A, UPCRST_F, 0); 1289 for (ms = 0; ms < FW_CMD_MAX_TIMEOUT; ) { 1290 if (!(csio_rd_reg32(hw, PCIE_FW_A) & PCIE_FW_HALT_F)) 1291 return 0; 1292 msleep(100); 1293 ms += 100; 1294 } 1295 return -ETIMEDOUT; 1296 } 1297 return 0; 1298 } 1299 1300 /* 1301 * csio_hw_fw_upgrade - perform all of the steps necessary to upgrade FW 1302 * @hw: the HW module 1303 * @mbox: mailbox to use for the FW RESET command (if desired) 1304 * @fw_data: the firmware image to write 1305 * @size: image size 1306 * @force: force upgrade even if firmware doesn't cooperate 1307 * 1308 * Perform all of the steps necessary for upgrading an adapter's 1309 * firmware image. Normally this requires the cooperation of the 1310 * existing firmware in order to halt all existing activities 1311 * but if an invalid mailbox token is passed in we skip that step 1312 * (though we'll still put the adapter microprocessor into RESET in 1313 * that case). 1314 * 1315 * On successful return the new firmware will have been loaded and 1316 * the adapter will have been fully RESET losing all previous setup 1317 * state. On unsuccessful return the adapter may be completely hosed ... 1318 * positive errno indicates that the adapter is ~probably~ intact, a 1319 * negative errno indicates that things are looking bad ... 1320 */ 1321 static int 1322 csio_hw_fw_upgrade(struct csio_hw *hw, uint32_t mbox, 1323 const u8 *fw_data, uint32_t size, int32_t force) 1324 { 1325 const struct fw_hdr *fw_hdr = (const struct fw_hdr *)fw_data; 1326 int reset, ret; 1327 1328 ret = csio_hw_fw_halt(hw, mbox, force); 1329 if (ret != 0 && !force) 1330 return ret; 1331 1332 ret = csio_hw_fw_dload(hw, (uint8_t *) fw_data, size); 1333 if (ret != 0) 1334 return ret; 1335 1336 /* 1337 * Older versions of the firmware don't understand the new 1338 * PCIE_FW.HALT flag and so won't know to perform a RESET when they 1339 * restart. So for newly loaded older firmware we'll have to do the 1340 * RESET for it so it starts up on a clean slate. We can tell if 1341 * the newly loaded firmware will handle this right by checking 1342 * its header flags to see if it advertises the capability. 1343 */ 1344 reset = ((ntohl(fw_hdr->flags) & FW_HDR_FLAGS_RESET_HALT) == 0); 1345 return csio_hw_fw_restart(hw, mbox, reset); 1346 } 1347 1348 /* 1349 * csio_get_device_params - Get device parameters. 1350 * @hw: HW module 1351 * 1352 */ 1353 static int 1354 csio_get_device_params(struct csio_hw *hw) 1355 { 1356 struct csio_wrm *wrm = csio_hw_to_wrm(hw); 1357 struct csio_mb *mbp; 1358 enum fw_retval retval; 1359 u32 param[6]; 1360 int i, j = 0; 1361 1362 /* Initialize portids to -1 */ 1363 for (i = 0; i < CSIO_MAX_PPORTS; i++) 1364 hw->pport[i].portid = -1; 1365 1366 mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); 1367 if (!mbp) { 1368 CSIO_INC_STATS(hw, n_err_nomem); 1369 return -ENOMEM; 1370 } 1371 1372 /* Get port vec information. */ 1373 param[0] = FW_PARAM_DEV(PORTVEC); 1374 1375 /* Get Core clock. */ 1376 param[1] = FW_PARAM_DEV(CCLK); 1377 1378 /* Get EQ id start and end. */ 1379 param[2] = FW_PARAM_PFVF(EQ_START); 1380 param[3] = FW_PARAM_PFVF(EQ_END); 1381 1382 /* Get IQ id start and end. */ 1383 param[4] = FW_PARAM_PFVF(IQFLINT_START); 1384 param[5] = FW_PARAM_PFVF(IQFLINT_END); 1385 1386 csio_mb_params(hw, mbp, CSIO_MB_DEFAULT_TMO, hw->pfn, 0, 1387 ARRAY_SIZE(param), param, NULL, false, NULL); 1388 if (csio_mb_issue(hw, mbp)) { 1389 csio_err(hw, "Issue of FW_PARAMS_CMD(read) failed!\n"); 1390 mempool_free(mbp, hw->mb_mempool); 1391 return -EINVAL; 1392 } 1393 1394 csio_mb_process_read_params_rsp(hw, mbp, &retval, 1395 ARRAY_SIZE(param), param); 1396 if (retval != FW_SUCCESS) { 1397 csio_err(hw, "FW_PARAMS_CMD(read) failed with ret:0x%x!\n", 1398 retval); 1399 mempool_free(mbp, hw->mb_mempool); 1400 return -EINVAL; 1401 } 1402 1403 /* cache the information. */ 1404 hw->port_vec = param[0]; 1405 hw->vpd.cclk = param[1]; 1406 wrm->fw_eq_start = param[2]; 1407 wrm->fw_iq_start = param[4]; 1408 1409 /* Using FW configured max iqs & eqs */ 1410 if ((hw->flags & CSIO_HWF_USING_SOFT_PARAMS) || 1411 !csio_is_hw_master(hw)) { 1412 hw->cfg_niq = param[5] - param[4] + 1; 1413 hw->cfg_neq = param[3] - param[2] + 1; 1414 csio_dbg(hw, "Using fwconfig max niqs %d neqs %d\n", 1415 hw->cfg_niq, hw->cfg_neq); 1416 } 1417 1418 hw->port_vec &= csio_port_mask; 1419 1420 hw->num_pports = hweight32(hw->port_vec); 1421 1422 csio_dbg(hw, "Port vector: 0x%x, #ports: %d\n", 1423 hw->port_vec, hw->num_pports); 1424 1425 for (i = 0; i < hw->num_pports; i++) { 1426 while ((hw->port_vec & (1 << j)) == 0) 1427 j++; 1428 hw->pport[i].portid = j++; 1429 csio_dbg(hw, "Found Port:%d\n", hw->pport[i].portid); 1430 } 1431 mempool_free(mbp, hw->mb_mempool); 1432 1433 return 0; 1434 } 1435 1436 1437 /* 1438 * csio_config_device_caps - Get and set device capabilities. 1439 * @hw: HW module 1440 * 1441 */ 1442 static int 1443 csio_config_device_caps(struct csio_hw *hw) 1444 { 1445 struct csio_mb *mbp; 1446 enum fw_retval retval; 1447 int rv = -EINVAL; 1448 1449 mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); 1450 if (!mbp) { 1451 CSIO_INC_STATS(hw, n_err_nomem); 1452 return -ENOMEM; 1453 } 1454 1455 /* Get device capabilities */ 1456 csio_mb_caps_config(hw, mbp, CSIO_MB_DEFAULT_TMO, 0, 0, 0, 0, NULL); 1457 1458 if (csio_mb_issue(hw, mbp)) { 1459 csio_err(hw, "Issue of FW_CAPS_CONFIG_CMD(r) failed!\n"); 1460 goto out; 1461 } 1462 1463 retval = csio_mb_fw_retval(mbp); 1464 if (retval != FW_SUCCESS) { 1465 csio_err(hw, "FW_CAPS_CONFIG_CMD(r) returned %d!\n", retval); 1466 goto out; 1467 } 1468 1469 /* Validate device capabilities */ 1470 rv = csio_hw_validate_caps(hw, mbp); 1471 if (rv != 0) 1472 goto out; 1473 1474 /* Don't config device capabilities if already configured */ 1475 if (hw->fw_state == CSIO_DEV_STATE_INIT) { 1476 rv = 0; 1477 goto out; 1478 } 1479 1480 /* Write back desired device capabilities */ 1481 csio_mb_caps_config(hw, mbp, CSIO_MB_DEFAULT_TMO, true, true, 1482 false, true, NULL); 1483 1484 if (csio_mb_issue(hw, mbp)) { 1485 csio_err(hw, "Issue of FW_CAPS_CONFIG_CMD(w) failed!\n"); 1486 goto out; 1487 } 1488 1489 retval = csio_mb_fw_retval(mbp); 1490 if (retval != FW_SUCCESS) { 1491 csio_err(hw, "FW_CAPS_CONFIG_CMD(w) returned %d!\n", retval); 1492 goto out; 1493 } 1494 1495 rv = 0; 1496 out: 1497 mempool_free(mbp, hw->mb_mempool); 1498 return rv; 1499 } 1500 1501 static inline enum cc_fec fwcap_to_cc_fec(fw_port_cap32_t fw_fec) 1502 { 1503 enum cc_fec cc_fec = 0; 1504 1505 if (fw_fec & FW_PORT_CAP32_FEC_RS) 1506 cc_fec |= FEC_RS; 1507 if (fw_fec & FW_PORT_CAP32_FEC_BASER_RS) 1508 cc_fec |= FEC_BASER_RS; 1509 1510 return cc_fec; 1511 } 1512 1513 static inline fw_port_cap32_t cc_to_fwcap_pause(enum cc_pause cc_pause) 1514 { 1515 fw_port_cap32_t fw_pause = 0; 1516 1517 if (cc_pause & PAUSE_RX) 1518 fw_pause |= FW_PORT_CAP32_FC_RX; 1519 if (cc_pause & PAUSE_TX) 1520 fw_pause |= FW_PORT_CAP32_FC_TX; 1521 1522 return fw_pause; 1523 } 1524 1525 static inline fw_port_cap32_t cc_to_fwcap_fec(enum cc_fec cc_fec) 1526 { 1527 fw_port_cap32_t fw_fec = 0; 1528 1529 if (cc_fec & FEC_RS) 1530 fw_fec |= FW_PORT_CAP32_FEC_RS; 1531 if (cc_fec & FEC_BASER_RS) 1532 fw_fec |= FW_PORT_CAP32_FEC_BASER_RS; 1533 1534 return fw_fec; 1535 } 1536 1537 /** 1538 * fwcap_to_fwspeed - return highest speed in Port Capabilities 1539 * @acaps: advertised Port Capabilities 1540 * 1541 * Get the highest speed for the port from the advertised Port 1542 * Capabilities. 1543 */ 1544 fw_port_cap32_t fwcap_to_fwspeed(fw_port_cap32_t acaps) 1545 { 1546 #define TEST_SPEED_RETURN(__caps_speed) \ 1547 do { \ 1548 if (acaps & FW_PORT_CAP32_SPEED_##__caps_speed) \ 1549 return FW_PORT_CAP32_SPEED_##__caps_speed; \ 1550 } while (0) 1551 1552 TEST_SPEED_RETURN(400G); 1553 TEST_SPEED_RETURN(200G); 1554 TEST_SPEED_RETURN(100G); 1555 TEST_SPEED_RETURN(50G); 1556 TEST_SPEED_RETURN(40G); 1557 TEST_SPEED_RETURN(25G); 1558 TEST_SPEED_RETURN(10G); 1559 TEST_SPEED_RETURN(1G); 1560 TEST_SPEED_RETURN(100M); 1561 1562 #undef TEST_SPEED_RETURN 1563 1564 return 0; 1565 } 1566 1567 /** 1568 * fwcaps16_to_caps32 - convert 16-bit Port Capabilities to 32-bits 1569 * @caps16: a 16-bit Port Capabilities value 1570 * 1571 * Returns the equivalent 32-bit Port Capabilities value. 1572 */ 1573 fw_port_cap32_t fwcaps16_to_caps32(fw_port_cap16_t caps16) 1574 { 1575 fw_port_cap32_t caps32 = 0; 1576 1577 #define CAP16_TO_CAP32(__cap) \ 1578 do { \ 1579 if (caps16 & FW_PORT_CAP_##__cap) \ 1580 caps32 |= FW_PORT_CAP32_##__cap; \ 1581 } while (0) 1582 1583 CAP16_TO_CAP32(SPEED_100M); 1584 CAP16_TO_CAP32(SPEED_1G); 1585 CAP16_TO_CAP32(SPEED_25G); 1586 CAP16_TO_CAP32(SPEED_10G); 1587 CAP16_TO_CAP32(SPEED_40G); 1588 CAP16_TO_CAP32(SPEED_100G); 1589 CAP16_TO_CAP32(FC_RX); 1590 CAP16_TO_CAP32(FC_TX); 1591 CAP16_TO_CAP32(ANEG); 1592 CAP16_TO_CAP32(MDIAUTO); 1593 CAP16_TO_CAP32(MDISTRAIGHT); 1594 CAP16_TO_CAP32(FEC_RS); 1595 CAP16_TO_CAP32(FEC_BASER_RS); 1596 CAP16_TO_CAP32(802_3_PAUSE); 1597 CAP16_TO_CAP32(802_3_ASM_DIR); 1598 1599 #undef CAP16_TO_CAP32 1600 1601 return caps32; 1602 } 1603 1604 /** 1605 * fwcaps32_to_caps16 - convert 32-bit Port Capabilities to 16-bits 1606 * @caps32: a 32-bit Port Capabilities value 1607 * 1608 * Returns the equivalent 16-bit Port Capabilities value. Note that 1609 * not all 32-bit Port Capabilities can be represented in the 16-bit 1610 * Port Capabilities and some fields/values may not make it. 1611 */ 1612 fw_port_cap16_t fwcaps32_to_caps16(fw_port_cap32_t caps32) 1613 { 1614 fw_port_cap16_t caps16 = 0; 1615 1616 #define CAP32_TO_CAP16(__cap) \ 1617 do { \ 1618 if (caps32 & FW_PORT_CAP32_##__cap) \ 1619 caps16 |= FW_PORT_CAP_##__cap; \ 1620 } while (0) 1621 1622 CAP32_TO_CAP16(SPEED_100M); 1623 CAP32_TO_CAP16(SPEED_1G); 1624 CAP32_TO_CAP16(SPEED_10G); 1625 CAP32_TO_CAP16(SPEED_25G); 1626 CAP32_TO_CAP16(SPEED_40G); 1627 CAP32_TO_CAP16(SPEED_100G); 1628 CAP32_TO_CAP16(FC_RX); 1629 CAP32_TO_CAP16(FC_TX); 1630 CAP32_TO_CAP16(802_3_PAUSE); 1631 CAP32_TO_CAP16(802_3_ASM_DIR); 1632 CAP32_TO_CAP16(ANEG); 1633 CAP32_TO_CAP16(FORCE_PAUSE); 1634 CAP32_TO_CAP16(MDIAUTO); 1635 CAP32_TO_CAP16(MDISTRAIGHT); 1636 CAP32_TO_CAP16(FEC_RS); 1637 CAP32_TO_CAP16(FEC_BASER_RS); 1638 1639 #undef CAP32_TO_CAP16 1640 1641 return caps16; 1642 } 1643 1644 /** 1645 * lstatus_to_fwcap - translate old lstatus to 32-bit Port Capabilities 1646 * @lstatus: old FW_PORT_ACTION_GET_PORT_INFO lstatus value 1647 * 1648 * Translates old FW_PORT_ACTION_GET_PORT_INFO lstatus field into new 1649 * 32-bit Port Capabilities value. 1650 */ 1651 fw_port_cap32_t lstatus_to_fwcap(u32 lstatus) 1652 { 1653 fw_port_cap32_t linkattr = 0; 1654 1655 /* The format of the Link Status in the old 1656 * 16-bit Port Information message isn't the same as the 1657 * 16-bit Port Capabilities bitfield used everywhere else. 1658 */ 1659 if (lstatus & FW_PORT_CMD_RXPAUSE_F) 1660 linkattr |= FW_PORT_CAP32_FC_RX; 1661 if (lstatus & FW_PORT_CMD_TXPAUSE_F) 1662 linkattr |= FW_PORT_CAP32_FC_TX; 1663 if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100M)) 1664 linkattr |= FW_PORT_CAP32_SPEED_100M; 1665 if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_1G)) 1666 linkattr |= FW_PORT_CAP32_SPEED_1G; 1667 if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_10G)) 1668 linkattr |= FW_PORT_CAP32_SPEED_10G; 1669 if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_25G)) 1670 linkattr |= FW_PORT_CAP32_SPEED_25G; 1671 if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_40G)) 1672 linkattr |= FW_PORT_CAP32_SPEED_40G; 1673 if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100G)) 1674 linkattr |= FW_PORT_CAP32_SPEED_100G; 1675 1676 return linkattr; 1677 } 1678 1679 /** 1680 * csio_init_link_config - initialize a link's SW state 1681 * @lc: pointer to structure holding the link state 1682 * @pcaps: link Port Capabilities 1683 * @acaps: link current Advertised Port Capabilities 1684 * 1685 * Initializes the SW state maintained for each link, including the link's 1686 * capabilities and default speed/flow-control/autonegotiation settings. 1687 */ 1688 static void csio_init_link_config(struct link_config *lc, fw_port_cap32_t pcaps, 1689 fw_port_cap32_t acaps) 1690 { 1691 lc->pcaps = pcaps; 1692 lc->def_acaps = acaps; 1693 lc->lpacaps = 0; 1694 lc->speed_caps = 0; 1695 lc->speed = 0; 1696 lc->requested_fc = PAUSE_RX | PAUSE_TX; 1697 lc->fc = lc->requested_fc; 1698 1699 /* 1700 * For Forward Error Control, we default to whatever the Firmware 1701 * tells us the Link is currently advertising. 1702 */ 1703 lc->requested_fec = FEC_AUTO; 1704 lc->fec = fwcap_to_cc_fec(lc->def_acaps); 1705 1706 /* If the Port is capable of Auto-Negtotiation, initialize it as 1707 * "enabled" and copy over all of the Physical Port Capabilities 1708 * to the Advertised Port Capabilities. Otherwise mark it as 1709 * Auto-Negotiate disabled and select the highest supported speed 1710 * for the link. Note parallel structure in t4_link_l1cfg_core() 1711 * and t4_handle_get_port_info(). 1712 */ 1713 if (lc->pcaps & FW_PORT_CAP32_ANEG) { 1714 lc->acaps = lc->pcaps & ADVERT_MASK; 1715 lc->autoneg = AUTONEG_ENABLE; 1716 lc->requested_fc |= PAUSE_AUTONEG; 1717 } else { 1718 lc->acaps = 0; 1719 lc->autoneg = AUTONEG_DISABLE; 1720 } 1721 } 1722 1723 static void csio_link_l1cfg(struct link_config *lc, uint16_t fw_caps, 1724 uint32_t *rcaps) 1725 { 1726 unsigned int fw_mdi = FW_PORT_CAP32_MDI_V(FW_PORT_CAP32_MDI_AUTO); 1727 fw_port_cap32_t fw_fc, cc_fec, fw_fec, lrcap; 1728 1729 lc->link_ok = 0; 1730 1731 /* 1732 * Convert driver coding of Pause Frame Flow Control settings into the 1733 * Firmware's API. 1734 */ 1735 fw_fc = cc_to_fwcap_pause(lc->requested_fc); 1736 1737 /* 1738 * Convert Common Code Forward Error Control settings into the 1739 * Firmware's API. If the current Requested FEC has "Automatic" 1740 * (IEEE 802.3) specified, then we use whatever the Firmware 1741 * sent us as part of it's IEEE 802.3-based interpretation of 1742 * the Transceiver Module EPROM FEC parameters. Otherwise we 1743 * use whatever is in the current Requested FEC settings. 1744 */ 1745 if (lc->requested_fec & FEC_AUTO) 1746 cc_fec = fwcap_to_cc_fec(lc->def_acaps); 1747 else 1748 cc_fec = lc->requested_fec; 1749 fw_fec = cc_to_fwcap_fec(cc_fec); 1750 1751 /* Figure out what our Requested Port Capabilities are going to be. 1752 * Note parallel structure in t4_handle_get_port_info() and 1753 * init_link_config(). 1754 */ 1755 if (!(lc->pcaps & FW_PORT_CAP32_ANEG)) { 1756 lrcap = (lc->pcaps & ADVERT_MASK) | fw_fc | fw_fec; 1757 lc->fc = lc->requested_fc & ~PAUSE_AUTONEG; 1758 lc->fec = cc_fec; 1759 } else if (lc->autoneg == AUTONEG_DISABLE) { 1760 lrcap = lc->speed_caps | fw_fc | fw_fec | fw_mdi; 1761 lc->fc = lc->requested_fc & ~PAUSE_AUTONEG; 1762 lc->fec = cc_fec; 1763 } else { 1764 lrcap = lc->acaps | fw_fc | fw_fec | fw_mdi; 1765 } 1766 1767 *rcaps = lrcap; 1768 } 1769 1770 /* 1771 * csio_enable_ports - Bring up all available ports. 1772 * @hw: HW module. 1773 * 1774 */ 1775 static int 1776 csio_enable_ports(struct csio_hw *hw) 1777 { 1778 struct csio_mb *mbp; 1779 u16 fw_caps = FW_CAPS_UNKNOWN; 1780 enum fw_retval retval; 1781 uint8_t portid; 1782 fw_port_cap32_t pcaps, acaps, rcaps; 1783 int i; 1784 1785 mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); 1786 if (!mbp) { 1787 CSIO_INC_STATS(hw, n_err_nomem); 1788 return -ENOMEM; 1789 } 1790 1791 for (i = 0; i < hw->num_pports; i++) { 1792 portid = hw->pport[i].portid; 1793 1794 if (fw_caps == FW_CAPS_UNKNOWN) { 1795 u32 param, val; 1796 1797 param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_PFVF) | 1798 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_PFVF_PORT_CAPS32)); 1799 val = 1; 1800 1801 csio_mb_params(hw, mbp, CSIO_MB_DEFAULT_TMO, 1802 hw->pfn, 0, 1, ¶m, &val, true, 1803 NULL); 1804 1805 if (csio_mb_issue(hw, mbp)) { 1806 csio_err(hw, "failed to issue FW_PARAMS_CMD(r) port:%d\n", 1807 portid); 1808 mempool_free(mbp, hw->mb_mempool); 1809 return -EINVAL; 1810 } 1811 1812 csio_mb_process_read_params_rsp(hw, mbp, &retval, 1813 0, NULL); 1814 fw_caps = retval ? FW_CAPS16 : FW_CAPS32; 1815 } 1816 1817 /* Read PORT information */ 1818 csio_mb_port(hw, mbp, CSIO_MB_DEFAULT_TMO, portid, 1819 false, 0, fw_caps, NULL); 1820 1821 if (csio_mb_issue(hw, mbp)) { 1822 csio_err(hw, "failed to issue FW_PORT_CMD(r) port:%d\n", 1823 portid); 1824 mempool_free(mbp, hw->mb_mempool); 1825 return -EINVAL; 1826 } 1827 1828 csio_mb_process_read_port_rsp(hw, mbp, &retval, fw_caps, 1829 &pcaps, &acaps); 1830 if (retval != FW_SUCCESS) { 1831 csio_err(hw, "FW_PORT_CMD(r) port:%d failed: 0x%x\n", 1832 portid, retval); 1833 mempool_free(mbp, hw->mb_mempool); 1834 return -EINVAL; 1835 } 1836 1837 csio_init_link_config(&hw->pport[i].link_cfg, pcaps, acaps); 1838 1839 csio_link_l1cfg(&hw->pport[i].link_cfg, fw_caps, &rcaps); 1840 1841 /* Write back PORT information */ 1842 csio_mb_port(hw, mbp, CSIO_MB_DEFAULT_TMO, portid, 1843 true, rcaps, fw_caps, NULL); 1844 1845 if (csio_mb_issue(hw, mbp)) { 1846 csio_err(hw, "failed to issue FW_PORT_CMD(w) port:%d\n", 1847 portid); 1848 mempool_free(mbp, hw->mb_mempool); 1849 return -EINVAL; 1850 } 1851 1852 retval = csio_mb_fw_retval(mbp); 1853 if (retval != FW_SUCCESS) { 1854 csio_err(hw, "FW_PORT_CMD(w) port:%d failed :0x%x\n", 1855 portid, retval); 1856 mempool_free(mbp, hw->mb_mempool); 1857 return -EINVAL; 1858 } 1859 1860 } /* For all ports */ 1861 1862 mempool_free(mbp, hw->mb_mempool); 1863 1864 return 0; 1865 } 1866 1867 /* 1868 * csio_get_fcoe_resinfo - Read fcoe fw resource info. 1869 * @hw: HW module 1870 * Issued with lock held. 1871 */ 1872 static int 1873 csio_get_fcoe_resinfo(struct csio_hw *hw) 1874 { 1875 struct csio_fcoe_res_info *res_info = &hw->fres_info; 1876 struct fw_fcoe_res_info_cmd *rsp; 1877 struct csio_mb *mbp; 1878 enum fw_retval retval; 1879 1880 mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); 1881 if (!mbp) { 1882 CSIO_INC_STATS(hw, n_err_nomem); 1883 return -ENOMEM; 1884 } 1885 1886 /* Get FCoE FW resource information */ 1887 csio_fcoe_read_res_info_init_mb(hw, mbp, CSIO_MB_DEFAULT_TMO, NULL); 1888 1889 if (csio_mb_issue(hw, mbp)) { 1890 csio_err(hw, "failed to issue FW_FCOE_RES_INFO_CMD\n"); 1891 mempool_free(mbp, hw->mb_mempool); 1892 return -EINVAL; 1893 } 1894 1895 rsp = (struct fw_fcoe_res_info_cmd *)(mbp->mb); 1896 retval = FW_CMD_RETVAL_G(ntohl(rsp->retval_len16)); 1897 if (retval != FW_SUCCESS) { 1898 csio_err(hw, "FW_FCOE_RES_INFO_CMD failed with ret x%x\n", 1899 retval); 1900 mempool_free(mbp, hw->mb_mempool); 1901 return -EINVAL; 1902 } 1903 1904 res_info->e_d_tov = ntohs(rsp->e_d_tov); 1905 res_info->r_a_tov_seq = ntohs(rsp->r_a_tov_seq); 1906 res_info->r_a_tov_els = ntohs(rsp->r_a_tov_els); 1907 res_info->r_r_tov = ntohs(rsp->r_r_tov); 1908 res_info->max_xchgs = ntohl(rsp->max_xchgs); 1909 res_info->max_ssns = ntohl(rsp->max_ssns); 1910 res_info->used_xchgs = ntohl(rsp->used_xchgs); 1911 res_info->used_ssns = ntohl(rsp->used_ssns); 1912 res_info->max_fcfs = ntohl(rsp->max_fcfs); 1913 res_info->max_vnps = ntohl(rsp->max_vnps); 1914 res_info->used_fcfs = ntohl(rsp->used_fcfs); 1915 res_info->used_vnps = ntohl(rsp->used_vnps); 1916 1917 csio_dbg(hw, "max ssns:%d max xchgs:%d\n", res_info->max_ssns, 1918 res_info->max_xchgs); 1919 mempool_free(mbp, hw->mb_mempool); 1920 1921 return 0; 1922 } 1923 1924 static int 1925 csio_hw_check_fwconfig(struct csio_hw *hw, u32 *param) 1926 { 1927 struct csio_mb *mbp; 1928 enum fw_retval retval; 1929 u32 _param[1]; 1930 1931 mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); 1932 if (!mbp) { 1933 CSIO_INC_STATS(hw, n_err_nomem); 1934 return -ENOMEM; 1935 } 1936 1937 /* 1938 * Find out whether we're dealing with a version of 1939 * the firmware which has configuration file support. 1940 */ 1941 _param[0] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) | 1942 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_CF)); 1943 1944 csio_mb_params(hw, mbp, CSIO_MB_DEFAULT_TMO, hw->pfn, 0, 1945 ARRAY_SIZE(_param), _param, NULL, false, NULL); 1946 if (csio_mb_issue(hw, mbp)) { 1947 csio_err(hw, "Issue of FW_PARAMS_CMD(read) failed!\n"); 1948 mempool_free(mbp, hw->mb_mempool); 1949 return -EINVAL; 1950 } 1951 1952 csio_mb_process_read_params_rsp(hw, mbp, &retval, 1953 ARRAY_SIZE(_param), _param); 1954 if (retval != FW_SUCCESS) { 1955 csio_err(hw, "FW_PARAMS_CMD(read) failed with ret:0x%x!\n", 1956 retval); 1957 mempool_free(mbp, hw->mb_mempool); 1958 return -EINVAL; 1959 } 1960 1961 mempool_free(mbp, hw->mb_mempool); 1962 *param = _param[0]; 1963 1964 return 0; 1965 } 1966 1967 static int 1968 csio_hw_flash_config(struct csio_hw *hw, u32 *fw_cfg_param, char *path) 1969 { 1970 int ret = 0; 1971 const struct firmware *cf; 1972 struct pci_dev *pci_dev = hw->pdev; 1973 struct device *dev = &pci_dev->dev; 1974 unsigned int mtype = 0, maddr = 0; 1975 uint32_t *cfg_data; 1976 int value_to_add = 0; 1977 const char *fw_cfg_file; 1978 1979 if (csio_is_t5(pci_dev->device & CSIO_HW_CHIP_MASK)) 1980 fw_cfg_file = FW_CFG_NAME_T5; 1981 else 1982 fw_cfg_file = FW_CFG_NAME_T6; 1983 1984 if (request_firmware(&cf, fw_cfg_file, dev) < 0) { 1985 csio_err(hw, "could not find config file %s, err: %d\n", 1986 fw_cfg_file, ret); 1987 return -ENOENT; 1988 } 1989 1990 if (cf->size%4 != 0) 1991 value_to_add = 4 - (cf->size % 4); 1992 1993 cfg_data = kzalloc(cf->size+value_to_add, GFP_KERNEL); 1994 if (cfg_data == NULL) { 1995 ret = -ENOMEM; 1996 goto leave; 1997 } 1998 1999 memcpy((void *)cfg_data, (const void *)cf->data, cf->size); 2000 if (csio_hw_check_fwconfig(hw, fw_cfg_param) != 0) { 2001 ret = -EINVAL; 2002 goto leave; 2003 } 2004 2005 mtype = FW_PARAMS_PARAM_Y_G(*fw_cfg_param); 2006 maddr = FW_PARAMS_PARAM_Z_G(*fw_cfg_param) << 16; 2007 2008 ret = csio_memory_write(hw, mtype, maddr, 2009 cf->size + value_to_add, cfg_data); 2010 2011 if ((ret == 0) && (value_to_add != 0)) { 2012 union { 2013 u32 word; 2014 char buf[4]; 2015 } last; 2016 size_t size = cf->size & ~0x3; 2017 int i; 2018 2019 last.word = cfg_data[size >> 2]; 2020 for (i = value_to_add; i < 4; i++) 2021 last.buf[i] = 0; 2022 ret = csio_memory_write(hw, mtype, maddr + size, 4, &last.word); 2023 } 2024 if (ret == 0) { 2025 csio_info(hw, "config file upgraded to %s\n", fw_cfg_file); 2026 snprintf(path, 64, "%s%s", "/lib/firmware/", fw_cfg_file); 2027 } 2028 2029 leave: 2030 kfree(cfg_data); 2031 release_firmware(cf); 2032 return ret; 2033 } 2034 2035 /* 2036 * HW initialization: contact FW, obtain config, perform basic init. 2037 * 2038 * If the firmware we're dealing with has Configuration File support, then 2039 * we use that to perform all configuration -- either using the configuration 2040 * file stored in flash on the adapter or using a filesystem-local file 2041 * if available. 2042 * 2043 * If we don't have configuration file support in the firmware, then we'll 2044 * have to set things up the old fashioned way with hard-coded register 2045 * writes and firmware commands ... 2046 */ 2047 2048 /* 2049 * Attempt to initialize the HW via a Firmware Configuration File. 2050 */ 2051 static int 2052 csio_hw_use_fwconfig(struct csio_hw *hw, int reset, u32 *fw_cfg_param) 2053 { 2054 struct csio_mb *mbp = NULL; 2055 struct fw_caps_config_cmd *caps_cmd; 2056 unsigned int mtype, maddr; 2057 int rv = -EINVAL; 2058 uint32_t finiver = 0, finicsum = 0, cfcsum = 0; 2059 char path[64]; 2060 char *config_name = NULL; 2061 2062 /* 2063 * Reset device if necessary 2064 */ 2065 if (reset) { 2066 rv = csio_do_reset(hw, true); 2067 if (rv != 0) 2068 goto bye; 2069 } 2070 2071 /* 2072 * If we have a configuration file in host , 2073 * then use that. Otherwise, use the configuration file stored 2074 * in the HW flash ... 2075 */ 2076 spin_unlock_irq(&hw->lock); 2077 rv = csio_hw_flash_config(hw, fw_cfg_param, path); 2078 spin_lock_irq(&hw->lock); 2079 if (rv != 0) { 2080 /* 2081 * config file was not found. Use default 2082 * config file from flash. 2083 */ 2084 config_name = "On FLASH"; 2085 mtype = FW_MEMTYPE_CF_FLASH; 2086 maddr = hw->chip_ops->chip_flash_cfg_addr(hw); 2087 } else { 2088 config_name = path; 2089 mtype = FW_PARAMS_PARAM_Y_G(*fw_cfg_param); 2090 maddr = FW_PARAMS_PARAM_Z_G(*fw_cfg_param) << 16; 2091 } 2092 2093 mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); 2094 if (!mbp) { 2095 CSIO_INC_STATS(hw, n_err_nomem); 2096 return -ENOMEM; 2097 } 2098 /* 2099 * Tell the firmware to process the indicated Configuration File. 2100 * If there are no errors and the caller has provided return value 2101 * pointers for the [fini] section version, checksum and computed 2102 * checksum, pass those back to the caller. 2103 */ 2104 caps_cmd = (struct fw_caps_config_cmd *)(mbp->mb); 2105 CSIO_INIT_MBP(mbp, caps_cmd, CSIO_MB_DEFAULT_TMO, hw, NULL, 1); 2106 caps_cmd->op_to_write = 2107 htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) | 2108 FW_CMD_REQUEST_F | 2109 FW_CMD_READ_F); 2110 caps_cmd->cfvalid_to_len16 = 2111 htonl(FW_CAPS_CONFIG_CMD_CFVALID_F | 2112 FW_CAPS_CONFIG_CMD_MEMTYPE_CF_V(mtype) | 2113 FW_CAPS_CONFIG_CMD_MEMADDR64K_CF_V(maddr >> 16) | 2114 FW_LEN16(*caps_cmd)); 2115 2116 if (csio_mb_issue(hw, mbp)) { 2117 rv = -EINVAL; 2118 goto bye; 2119 } 2120 2121 rv = csio_mb_fw_retval(mbp); 2122 /* If the CAPS_CONFIG failed with an ENOENT (for a Firmware 2123 * Configuration File in FLASH), our last gasp effort is to use the 2124 * Firmware Configuration File which is embedded in the 2125 * firmware. A very few early versions of the firmware didn't 2126 * have one embedded but we can ignore those. 2127 */ 2128 if (rv == ENOENT) { 2129 CSIO_INIT_MBP(mbp, caps_cmd, CSIO_MB_DEFAULT_TMO, hw, NULL, 1); 2130 caps_cmd->op_to_write = htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) | 2131 FW_CMD_REQUEST_F | 2132 FW_CMD_READ_F); 2133 caps_cmd->cfvalid_to_len16 = htonl(FW_LEN16(*caps_cmd)); 2134 2135 if (csio_mb_issue(hw, mbp)) { 2136 rv = -EINVAL; 2137 goto bye; 2138 } 2139 2140 rv = csio_mb_fw_retval(mbp); 2141 config_name = "Firmware Default"; 2142 } 2143 if (rv != FW_SUCCESS) 2144 goto bye; 2145 2146 finiver = ntohl(caps_cmd->finiver); 2147 finicsum = ntohl(caps_cmd->finicsum); 2148 cfcsum = ntohl(caps_cmd->cfcsum); 2149 2150 /* 2151 * And now tell the firmware to use the configuration we just loaded. 2152 */ 2153 caps_cmd->op_to_write = 2154 htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) | 2155 FW_CMD_REQUEST_F | 2156 FW_CMD_WRITE_F); 2157 caps_cmd->cfvalid_to_len16 = htonl(FW_LEN16(*caps_cmd)); 2158 2159 if (csio_mb_issue(hw, mbp)) { 2160 rv = -EINVAL; 2161 goto bye; 2162 } 2163 2164 rv = csio_mb_fw_retval(mbp); 2165 if (rv != FW_SUCCESS) { 2166 csio_dbg(hw, "FW_CAPS_CONFIG_CMD returned %d!\n", rv); 2167 goto bye; 2168 } 2169 2170 if (finicsum != cfcsum) { 2171 csio_warn(hw, 2172 "Config File checksum mismatch: csum=%#x, computed=%#x\n", 2173 finicsum, cfcsum); 2174 } 2175 2176 /* Validate device capabilities */ 2177 rv = csio_hw_validate_caps(hw, mbp); 2178 if (rv != 0) 2179 goto bye; 2180 2181 mempool_free(mbp, hw->mb_mempool); 2182 mbp = NULL; 2183 2184 /* 2185 * Note that we're operating with parameters 2186 * not supplied by the driver, rather than from hard-wired 2187 * initialization constants buried in the driver. 2188 */ 2189 hw->flags |= CSIO_HWF_USING_SOFT_PARAMS; 2190 2191 /* device parameters */ 2192 rv = csio_get_device_params(hw); 2193 if (rv != 0) 2194 goto bye; 2195 2196 /* Configure SGE */ 2197 csio_wr_sge_init(hw); 2198 2199 /* 2200 * And finally tell the firmware to initialize itself using the 2201 * parameters from the Configuration File. 2202 */ 2203 /* Post event to notify completion of configuration */ 2204 csio_post_event(&hw->sm, CSIO_HWE_INIT); 2205 2206 csio_info(hw, "Successfully configure using Firmware " 2207 "Configuration File %s, version %#x, computed checksum %#x\n", 2208 config_name, finiver, cfcsum); 2209 return 0; 2210 2211 /* 2212 * Something bad happened. Return the error ... 2213 */ 2214 bye: 2215 if (mbp) 2216 mempool_free(mbp, hw->mb_mempool); 2217 hw->flags &= ~CSIO_HWF_USING_SOFT_PARAMS; 2218 csio_warn(hw, "Configuration file error %d\n", rv); 2219 return rv; 2220 } 2221 2222 /* Is the given firmware API compatible with the one the driver was compiled 2223 * with? 2224 */ 2225 static int fw_compatible(const struct fw_hdr *hdr1, const struct fw_hdr *hdr2) 2226 { 2227 2228 /* short circuit if it's the exact same firmware version */ 2229 if (hdr1->chip == hdr2->chip && hdr1->fw_ver == hdr2->fw_ver) 2230 return 1; 2231 2232 #define SAME_INTF(x) (hdr1->intfver_##x == hdr2->intfver_##x) 2233 if (hdr1->chip == hdr2->chip && SAME_INTF(nic) && SAME_INTF(vnic) && 2234 SAME_INTF(ri) && SAME_INTF(iscsi) && SAME_INTF(fcoe)) 2235 return 1; 2236 #undef SAME_INTF 2237 2238 return 0; 2239 } 2240 2241 /* The firmware in the filesystem is usable, but should it be installed? 2242 * This routine explains itself in detail if it indicates the filesystem 2243 * firmware should be installed. 2244 */ 2245 static int csio_should_install_fs_fw(struct csio_hw *hw, int card_fw_usable, 2246 int k, int c) 2247 { 2248 const char *reason; 2249 2250 if (!card_fw_usable) { 2251 reason = "incompatible or unusable"; 2252 goto install; 2253 } 2254 2255 if (k > c) { 2256 reason = "older than the version supported with this driver"; 2257 goto install; 2258 } 2259 2260 return 0; 2261 2262 install: 2263 csio_err(hw, "firmware on card (%u.%u.%u.%u) is %s, " 2264 "installing firmware %u.%u.%u.%u on card.\n", 2265 FW_HDR_FW_VER_MAJOR_G(c), FW_HDR_FW_VER_MINOR_G(c), 2266 FW_HDR_FW_VER_MICRO_G(c), FW_HDR_FW_VER_BUILD_G(c), reason, 2267 FW_HDR_FW_VER_MAJOR_G(k), FW_HDR_FW_VER_MINOR_G(k), 2268 FW_HDR_FW_VER_MICRO_G(k), FW_HDR_FW_VER_BUILD_G(k)); 2269 2270 return 1; 2271 } 2272 2273 static struct fw_info fw_info_array[] = { 2274 { 2275 .chip = CHELSIO_T5, 2276 .fs_name = FW_CFG_NAME_T5, 2277 .fw_mod_name = FW_FNAME_T5, 2278 .fw_hdr = { 2279 .chip = FW_HDR_CHIP_T5, 2280 .fw_ver = __cpu_to_be32(FW_VERSION(T5)), 2281 .intfver_nic = FW_INTFVER(T5, NIC), 2282 .intfver_vnic = FW_INTFVER(T5, VNIC), 2283 .intfver_ri = FW_INTFVER(T5, RI), 2284 .intfver_iscsi = FW_INTFVER(T5, ISCSI), 2285 .intfver_fcoe = FW_INTFVER(T5, FCOE), 2286 }, 2287 }, { 2288 .chip = CHELSIO_T6, 2289 .fs_name = FW_CFG_NAME_T6, 2290 .fw_mod_name = FW_FNAME_T6, 2291 .fw_hdr = { 2292 .chip = FW_HDR_CHIP_T6, 2293 .fw_ver = __cpu_to_be32(FW_VERSION(T6)), 2294 .intfver_nic = FW_INTFVER(T6, NIC), 2295 .intfver_vnic = FW_INTFVER(T6, VNIC), 2296 .intfver_ri = FW_INTFVER(T6, RI), 2297 .intfver_iscsi = FW_INTFVER(T6, ISCSI), 2298 .intfver_fcoe = FW_INTFVER(T6, FCOE), 2299 }, 2300 } 2301 }; 2302 2303 static struct fw_info *find_fw_info(int chip) 2304 { 2305 int i; 2306 2307 for (i = 0; i < ARRAY_SIZE(fw_info_array); i++) { 2308 if (fw_info_array[i].chip == chip) 2309 return &fw_info_array[i]; 2310 } 2311 return NULL; 2312 } 2313 2314 static int csio_hw_prep_fw(struct csio_hw *hw, struct fw_info *fw_info, 2315 const u8 *fw_data, unsigned int fw_size, 2316 struct fw_hdr *card_fw, enum csio_dev_state state, 2317 int *reset) 2318 { 2319 int ret, card_fw_usable, fs_fw_usable; 2320 const struct fw_hdr *fs_fw; 2321 const struct fw_hdr *drv_fw; 2322 2323 drv_fw = &fw_info->fw_hdr; 2324 2325 /* Read the header of the firmware on the card */ 2326 ret = csio_hw_read_flash(hw, FLASH_FW_START, 2327 sizeof(*card_fw) / sizeof(uint32_t), 2328 (uint32_t *)card_fw, 1); 2329 if (ret == 0) { 2330 card_fw_usable = fw_compatible(drv_fw, (const void *)card_fw); 2331 } else { 2332 csio_err(hw, 2333 "Unable to read card's firmware header: %d\n", ret); 2334 card_fw_usable = 0; 2335 } 2336 2337 if (fw_data != NULL) { 2338 fs_fw = (const void *)fw_data; 2339 fs_fw_usable = fw_compatible(drv_fw, fs_fw); 2340 } else { 2341 fs_fw = NULL; 2342 fs_fw_usable = 0; 2343 } 2344 2345 if (card_fw_usable && card_fw->fw_ver == drv_fw->fw_ver && 2346 (!fs_fw_usable || fs_fw->fw_ver == drv_fw->fw_ver)) { 2347 /* Common case: the firmware on the card is an exact match and 2348 * the filesystem one is an exact match too, or the filesystem 2349 * one is absent/incompatible. 2350 */ 2351 } else if (fs_fw_usable && state == CSIO_DEV_STATE_UNINIT && 2352 csio_should_install_fs_fw(hw, card_fw_usable, 2353 be32_to_cpu(fs_fw->fw_ver), 2354 be32_to_cpu(card_fw->fw_ver))) { 2355 ret = csio_hw_fw_upgrade(hw, hw->pfn, fw_data, 2356 fw_size, 0); 2357 if (ret != 0) { 2358 csio_err(hw, 2359 "failed to install firmware: %d\n", ret); 2360 goto bye; 2361 } 2362 2363 /* Installed successfully, update the cached header too. */ 2364 memcpy(card_fw, fs_fw, sizeof(*card_fw)); 2365 card_fw_usable = 1; 2366 *reset = 0; /* already reset as part of load_fw */ 2367 } 2368 2369 if (!card_fw_usable) { 2370 uint32_t d, c, k; 2371 2372 d = be32_to_cpu(drv_fw->fw_ver); 2373 c = be32_to_cpu(card_fw->fw_ver); 2374 k = fs_fw ? be32_to_cpu(fs_fw->fw_ver) : 0; 2375 2376 csio_err(hw, "Cannot find a usable firmware: " 2377 "chip state %d, " 2378 "driver compiled with %d.%d.%d.%d, " 2379 "card has %d.%d.%d.%d, filesystem has %d.%d.%d.%d\n", 2380 state, 2381 FW_HDR_FW_VER_MAJOR_G(d), FW_HDR_FW_VER_MINOR_G(d), 2382 FW_HDR_FW_VER_MICRO_G(d), FW_HDR_FW_VER_BUILD_G(d), 2383 FW_HDR_FW_VER_MAJOR_G(c), FW_HDR_FW_VER_MINOR_G(c), 2384 FW_HDR_FW_VER_MICRO_G(c), FW_HDR_FW_VER_BUILD_G(c), 2385 FW_HDR_FW_VER_MAJOR_G(k), FW_HDR_FW_VER_MINOR_G(k), 2386 FW_HDR_FW_VER_MICRO_G(k), FW_HDR_FW_VER_BUILD_G(k)); 2387 ret = EINVAL; 2388 goto bye; 2389 } 2390 2391 /* We're using whatever's on the card and it's known to be good. */ 2392 hw->fwrev = be32_to_cpu(card_fw->fw_ver); 2393 hw->tp_vers = be32_to_cpu(card_fw->tp_microcode_ver); 2394 2395 bye: 2396 return ret; 2397 } 2398 2399 /* 2400 * Returns -EINVAL if attempts to flash the firmware failed, 2401 * -ENOMEM if memory allocation failed else returns 0, 2402 * if flashing was not attempted because the card had the 2403 * latest firmware ECANCELED is returned 2404 */ 2405 static int 2406 csio_hw_flash_fw(struct csio_hw *hw, int *reset) 2407 { 2408 int ret = -ECANCELED; 2409 const struct firmware *fw; 2410 struct fw_info *fw_info; 2411 struct fw_hdr *card_fw; 2412 struct pci_dev *pci_dev = hw->pdev; 2413 struct device *dev = &pci_dev->dev ; 2414 const u8 *fw_data = NULL; 2415 unsigned int fw_size = 0; 2416 const char *fw_bin_file; 2417 2418 /* This is the firmware whose headers the driver was compiled 2419 * against 2420 */ 2421 fw_info = find_fw_info(CHELSIO_CHIP_VERSION(hw->chip_id)); 2422 if (fw_info == NULL) { 2423 csio_err(hw, 2424 "unable to get firmware info for chip %d.\n", 2425 CHELSIO_CHIP_VERSION(hw->chip_id)); 2426 return -EINVAL; 2427 } 2428 2429 /* allocate memory to read the header of the firmware on the 2430 * card 2431 */ 2432 card_fw = kmalloc(sizeof(*card_fw), GFP_KERNEL); 2433 if (!card_fw) 2434 return -ENOMEM; 2435 2436 if (csio_is_t5(pci_dev->device & CSIO_HW_CHIP_MASK)) 2437 fw_bin_file = FW_FNAME_T5; 2438 else 2439 fw_bin_file = FW_FNAME_T6; 2440 2441 if (request_firmware(&fw, fw_bin_file, dev) < 0) { 2442 csio_err(hw, "could not find firmware image %s, err: %d\n", 2443 fw_bin_file, ret); 2444 } else { 2445 fw_data = fw->data; 2446 fw_size = fw->size; 2447 } 2448 2449 /* upgrade FW logic */ 2450 ret = csio_hw_prep_fw(hw, fw_info, fw_data, fw_size, card_fw, 2451 hw->fw_state, reset); 2452 2453 /* Cleaning up */ 2454 if (fw != NULL) 2455 release_firmware(fw); 2456 kfree(card_fw); 2457 return ret; 2458 } 2459 2460 static int csio_hw_check_fwver(struct csio_hw *hw) 2461 { 2462 if (csio_is_t6(hw->pdev->device & CSIO_HW_CHIP_MASK) && 2463 (hw->fwrev < CSIO_MIN_T6_FW)) { 2464 csio_hw_print_fw_version(hw, "T6 unsupported fw"); 2465 return -1; 2466 } 2467 2468 return 0; 2469 } 2470 2471 /* 2472 * csio_hw_configure - Configure HW 2473 * @hw - HW module 2474 * 2475 */ 2476 static void 2477 csio_hw_configure(struct csio_hw *hw) 2478 { 2479 int reset = 1; 2480 int rv; 2481 u32 param[1]; 2482 2483 rv = csio_hw_dev_ready(hw); 2484 if (rv != 0) { 2485 CSIO_INC_STATS(hw, n_err_fatal); 2486 csio_post_event(&hw->sm, CSIO_HWE_FATAL); 2487 goto out; 2488 } 2489 2490 /* HW version */ 2491 hw->chip_ver = (char)csio_rd_reg32(hw, PL_REV_A); 2492 2493 /* Needed for FW download */ 2494 rv = csio_hw_get_flash_params(hw); 2495 if (rv != 0) { 2496 csio_err(hw, "Failed to get serial flash params rv:%d\n", rv); 2497 csio_post_event(&hw->sm, CSIO_HWE_FATAL); 2498 goto out; 2499 } 2500 2501 /* Set PCIe completion timeout to 4 seconds */ 2502 if (pci_is_pcie(hw->pdev)) 2503 pcie_capability_clear_and_set_word(hw->pdev, PCI_EXP_DEVCTL2, 2504 PCI_EXP_DEVCTL2_COMP_TIMEOUT, 0xd); 2505 2506 hw->chip_ops->chip_set_mem_win(hw, MEMWIN_CSIOSTOR); 2507 2508 rv = csio_hw_get_fw_version(hw, &hw->fwrev); 2509 if (rv != 0) 2510 goto out; 2511 2512 csio_hw_print_fw_version(hw, "Firmware revision"); 2513 2514 rv = csio_do_hello(hw, &hw->fw_state); 2515 if (rv != 0) { 2516 CSIO_INC_STATS(hw, n_err_fatal); 2517 csio_post_event(&hw->sm, CSIO_HWE_FATAL); 2518 goto out; 2519 } 2520 2521 /* Read vpd */ 2522 rv = csio_hw_get_vpd_params(hw, &hw->vpd); 2523 if (rv != 0) 2524 goto out; 2525 2526 csio_hw_get_fw_version(hw, &hw->fwrev); 2527 csio_hw_get_tp_version(hw, &hw->tp_vers); 2528 if (csio_is_hw_master(hw) && hw->fw_state != CSIO_DEV_STATE_INIT) { 2529 2530 /* Do firmware update */ 2531 spin_unlock_irq(&hw->lock); 2532 rv = csio_hw_flash_fw(hw, &reset); 2533 spin_lock_irq(&hw->lock); 2534 2535 if (rv != 0) 2536 goto out; 2537 2538 rv = csio_hw_check_fwver(hw); 2539 if (rv < 0) 2540 goto out; 2541 2542 /* If the firmware doesn't support Configuration Files, 2543 * return an error. 2544 */ 2545 rv = csio_hw_check_fwconfig(hw, param); 2546 if (rv != 0) { 2547 csio_info(hw, "Firmware doesn't support " 2548 "Firmware Configuration files\n"); 2549 goto out; 2550 } 2551 2552 /* The firmware provides us with a memory buffer where we can 2553 * load a Configuration File from the host if we want to 2554 * override the Configuration File in flash. 2555 */ 2556 rv = csio_hw_use_fwconfig(hw, reset, param); 2557 if (rv == -ENOENT) { 2558 csio_info(hw, "Could not initialize " 2559 "adapter, error%d\n", rv); 2560 goto out; 2561 } 2562 if (rv != 0) { 2563 csio_info(hw, "Could not initialize " 2564 "adapter, error%d\n", rv); 2565 goto out; 2566 } 2567 2568 } else { 2569 rv = csio_hw_check_fwver(hw); 2570 if (rv < 0) 2571 goto out; 2572 2573 if (hw->fw_state == CSIO_DEV_STATE_INIT) { 2574 2575 hw->flags |= CSIO_HWF_USING_SOFT_PARAMS; 2576 2577 /* device parameters */ 2578 rv = csio_get_device_params(hw); 2579 if (rv != 0) 2580 goto out; 2581 2582 /* Get device capabilities */ 2583 rv = csio_config_device_caps(hw); 2584 if (rv != 0) 2585 goto out; 2586 2587 /* Configure SGE */ 2588 csio_wr_sge_init(hw); 2589 2590 /* Post event to notify completion of configuration */ 2591 csio_post_event(&hw->sm, CSIO_HWE_INIT); 2592 goto out; 2593 } 2594 } /* if not master */ 2595 2596 out: 2597 return; 2598 } 2599 2600 /* 2601 * csio_hw_initialize - Initialize HW 2602 * @hw - HW module 2603 * 2604 */ 2605 static void 2606 csio_hw_initialize(struct csio_hw *hw) 2607 { 2608 struct csio_mb *mbp; 2609 enum fw_retval retval; 2610 int rv; 2611 int i; 2612 2613 if (csio_is_hw_master(hw) && hw->fw_state != CSIO_DEV_STATE_INIT) { 2614 mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); 2615 if (!mbp) 2616 goto out; 2617 2618 csio_mb_initialize(hw, mbp, CSIO_MB_DEFAULT_TMO, NULL); 2619 2620 if (csio_mb_issue(hw, mbp)) { 2621 csio_err(hw, "Issue of FW_INITIALIZE_CMD failed!\n"); 2622 goto free_and_out; 2623 } 2624 2625 retval = csio_mb_fw_retval(mbp); 2626 if (retval != FW_SUCCESS) { 2627 csio_err(hw, "FW_INITIALIZE_CMD returned 0x%x!\n", 2628 retval); 2629 goto free_and_out; 2630 } 2631 2632 mempool_free(mbp, hw->mb_mempool); 2633 } 2634 2635 rv = csio_get_fcoe_resinfo(hw); 2636 if (rv != 0) { 2637 csio_err(hw, "Failed to read fcoe resource info: %d\n", rv); 2638 goto out; 2639 } 2640 2641 spin_unlock_irq(&hw->lock); 2642 rv = csio_config_queues(hw); 2643 spin_lock_irq(&hw->lock); 2644 2645 if (rv != 0) { 2646 csio_err(hw, "Config of queues failed!: %d\n", rv); 2647 goto out; 2648 } 2649 2650 for (i = 0; i < hw->num_pports; i++) 2651 hw->pport[i].mod_type = FW_PORT_MOD_TYPE_NA; 2652 2653 if (csio_is_hw_master(hw) && hw->fw_state != CSIO_DEV_STATE_INIT) { 2654 rv = csio_enable_ports(hw); 2655 if (rv != 0) { 2656 csio_err(hw, "Failed to enable ports: %d\n", rv); 2657 goto out; 2658 } 2659 } 2660 2661 csio_post_event(&hw->sm, CSIO_HWE_INIT_DONE); 2662 return; 2663 2664 free_and_out: 2665 mempool_free(mbp, hw->mb_mempool); 2666 out: 2667 return; 2668 } 2669 2670 #define PF_INTR_MASK (PFSW_F | PFCIM_F) 2671 2672 /* 2673 * csio_hw_intr_enable - Enable HW interrupts 2674 * @hw: Pointer to HW module. 2675 * 2676 * Enable interrupts in HW registers. 2677 */ 2678 static void 2679 csio_hw_intr_enable(struct csio_hw *hw) 2680 { 2681 uint16_t vec = (uint16_t)csio_get_mb_intr_idx(csio_hw_to_mbm(hw)); 2682 u32 pf = 0; 2683 uint32_t pl = csio_rd_reg32(hw, PL_INT_ENABLE_A); 2684 2685 if (csio_is_t5(hw->pdev->device & CSIO_HW_CHIP_MASK)) 2686 pf = SOURCEPF_G(csio_rd_reg32(hw, PL_WHOAMI_A)); 2687 else 2688 pf = T6_SOURCEPF_G(csio_rd_reg32(hw, PL_WHOAMI_A)); 2689 2690 /* 2691 * Set aivec for MSI/MSIX. PCIE_PF_CFG.INTXType is set up 2692 * by FW, so do nothing for INTX. 2693 */ 2694 if (hw->intr_mode == CSIO_IM_MSIX) 2695 csio_set_reg_field(hw, MYPF_REG(PCIE_PF_CFG_A), 2696 AIVEC_V(AIVEC_M), vec); 2697 else if (hw->intr_mode == CSIO_IM_MSI) 2698 csio_set_reg_field(hw, MYPF_REG(PCIE_PF_CFG_A), 2699 AIVEC_V(AIVEC_M), 0); 2700 2701 csio_wr_reg32(hw, PF_INTR_MASK, MYPF_REG(PL_PF_INT_ENABLE_A)); 2702 2703 /* Turn on MB interrupts - this will internally flush PIO as well */ 2704 csio_mb_intr_enable(hw); 2705 2706 /* These are common registers - only a master can modify them */ 2707 if (csio_is_hw_master(hw)) { 2708 /* 2709 * Disable the Serial FLASH interrupt, if enabled! 2710 */ 2711 pl &= (~SF_F); 2712 csio_wr_reg32(hw, pl, PL_INT_ENABLE_A); 2713 2714 csio_wr_reg32(hw, ERR_CPL_EXCEED_IQE_SIZE_F | 2715 EGRESS_SIZE_ERR_F | ERR_INVALID_CIDX_INC_F | 2716 ERR_CPL_OPCODE_0_F | ERR_DROPPED_DB_F | 2717 ERR_DATA_CPL_ON_HIGH_QID1_F | 2718 ERR_DATA_CPL_ON_HIGH_QID0_F | ERR_BAD_DB_PIDX3_F | 2719 ERR_BAD_DB_PIDX2_F | ERR_BAD_DB_PIDX1_F | 2720 ERR_BAD_DB_PIDX0_F | ERR_ING_CTXT_PRIO_F | 2721 ERR_EGR_CTXT_PRIO_F | INGRESS_SIZE_ERR_F, 2722 SGE_INT_ENABLE3_A); 2723 csio_set_reg_field(hw, PL_INT_MAP0_A, 0, 1 << pf); 2724 } 2725 2726 hw->flags |= CSIO_HWF_HW_INTR_ENABLED; 2727 2728 } 2729 2730 /* 2731 * csio_hw_intr_disable - Disable HW interrupts 2732 * @hw: Pointer to HW module. 2733 * 2734 * Turn off Mailbox and PCI_PF_CFG interrupts. 2735 */ 2736 void 2737 csio_hw_intr_disable(struct csio_hw *hw) 2738 { 2739 u32 pf = 0; 2740 2741 if (csio_is_t5(hw->pdev->device & CSIO_HW_CHIP_MASK)) 2742 pf = SOURCEPF_G(csio_rd_reg32(hw, PL_WHOAMI_A)); 2743 else 2744 pf = T6_SOURCEPF_G(csio_rd_reg32(hw, PL_WHOAMI_A)); 2745 2746 if (!(hw->flags & CSIO_HWF_HW_INTR_ENABLED)) 2747 return; 2748 2749 hw->flags &= ~CSIO_HWF_HW_INTR_ENABLED; 2750 2751 csio_wr_reg32(hw, 0, MYPF_REG(PL_PF_INT_ENABLE_A)); 2752 if (csio_is_hw_master(hw)) 2753 csio_set_reg_field(hw, PL_INT_MAP0_A, 1 << pf, 0); 2754 2755 /* Turn off MB interrupts */ 2756 csio_mb_intr_disable(hw); 2757 2758 } 2759 2760 void 2761 csio_hw_fatal_err(struct csio_hw *hw) 2762 { 2763 csio_set_reg_field(hw, SGE_CONTROL_A, GLOBALENABLE_F, 0); 2764 csio_hw_intr_disable(hw); 2765 2766 /* Do not reset HW, we may need FW state for debugging */ 2767 csio_fatal(hw, "HW Fatal error encountered!\n"); 2768 } 2769 2770 /*****************************************************************************/ 2771 /* START: HW SM */ 2772 /*****************************************************************************/ 2773 /* 2774 * csio_hws_uninit - Uninit state 2775 * @hw - HW module 2776 * @evt - Event 2777 * 2778 */ 2779 static void 2780 csio_hws_uninit(struct csio_hw *hw, enum csio_hw_ev evt) 2781 { 2782 hw->prev_evt = hw->cur_evt; 2783 hw->cur_evt = evt; 2784 CSIO_INC_STATS(hw, n_evt_sm[evt]); 2785 2786 switch (evt) { 2787 case CSIO_HWE_CFG: 2788 csio_set_state(&hw->sm, csio_hws_configuring); 2789 csio_hw_configure(hw); 2790 break; 2791 2792 default: 2793 CSIO_INC_STATS(hw, n_evt_unexp); 2794 break; 2795 } 2796 } 2797 2798 /* 2799 * csio_hws_configuring - Configuring state 2800 * @hw - HW module 2801 * @evt - Event 2802 * 2803 */ 2804 static void 2805 csio_hws_configuring(struct csio_hw *hw, enum csio_hw_ev evt) 2806 { 2807 hw->prev_evt = hw->cur_evt; 2808 hw->cur_evt = evt; 2809 CSIO_INC_STATS(hw, n_evt_sm[evt]); 2810 2811 switch (evt) { 2812 case CSIO_HWE_INIT: 2813 csio_set_state(&hw->sm, csio_hws_initializing); 2814 csio_hw_initialize(hw); 2815 break; 2816 2817 case CSIO_HWE_INIT_DONE: 2818 csio_set_state(&hw->sm, csio_hws_ready); 2819 /* Fan out event to all lnode SMs */ 2820 csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWREADY); 2821 break; 2822 2823 case CSIO_HWE_FATAL: 2824 csio_set_state(&hw->sm, csio_hws_uninit); 2825 break; 2826 2827 case CSIO_HWE_PCI_REMOVE: 2828 csio_do_bye(hw); 2829 break; 2830 default: 2831 CSIO_INC_STATS(hw, n_evt_unexp); 2832 break; 2833 } 2834 } 2835 2836 /* 2837 * csio_hws_initializing - Initializing state 2838 * @hw - HW module 2839 * @evt - Event 2840 * 2841 */ 2842 static void 2843 csio_hws_initializing(struct csio_hw *hw, enum csio_hw_ev evt) 2844 { 2845 hw->prev_evt = hw->cur_evt; 2846 hw->cur_evt = evt; 2847 CSIO_INC_STATS(hw, n_evt_sm[evt]); 2848 2849 switch (evt) { 2850 case CSIO_HWE_INIT_DONE: 2851 csio_set_state(&hw->sm, csio_hws_ready); 2852 2853 /* Fan out event to all lnode SMs */ 2854 csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWREADY); 2855 2856 /* Enable interrupts */ 2857 csio_hw_intr_enable(hw); 2858 break; 2859 2860 case CSIO_HWE_FATAL: 2861 csio_set_state(&hw->sm, csio_hws_uninit); 2862 break; 2863 2864 case CSIO_HWE_PCI_REMOVE: 2865 csio_do_bye(hw); 2866 break; 2867 2868 default: 2869 CSIO_INC_STATS(hw, n_evt_unexp); 2870 break; 2871 } 2872 } 2873 2874 /* 2875 * csio_hws_ready - Ready state 2876 * @hw - HW module 2877 * @evt - Event 2878 * 2879 */ 2880 static void 2881 csio_hws_ready(struct csio_hw *hw, enum csio_hw_ev evt) 2882 { 2883 /* Remember the event */ 2884 hw->evtflag = evt; 2885 2886 hw->prev_evt = hw->cur_evt; 2887 hw->cur_evt = evt; 2888 CSIO_INC_STATS(hw, n_evt_sm[evt]); 2889 2890 switch (evt) { 2891 case CSIO_HWE_HBA_RESET: 2892 case CSIO_HWE_FW_DLOAD: 2893 case CSIO_HWE_SUSPEND: 2894 case CSIO_HWE_PCI_REMOVE: 2895 case CSIO_HWE_PCIERR_DETECTED: 2896 csio_set_state(&hw->sm, csio_hws_quiescing); 2897 /* cleanup all outstanding cmds */ 2898 if (evt == CSIO_HWE_HBA_RESET || 2899 evt == CSIO_HWE_PCIERR_DETECTED) 2900 csio_scsim_cleanup_io(csio_hw_to_scsim(hw), false); 2901 else 2902 csio_scsim_cleanup_io(csio_hw_to_scsim(hw), true); 2903 2904 csio_hw_intr_disable(hw); 2905 csio_hw_mbm_cleanup(hw); 2906 csio_evtq_stop(hw); 2907 csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWSTOP); 2908 csio_evtq_flush(hw); 2909 csio_mgmtm_cleanup(csio_hw_to_mgmtm(hw)); 2910 csio_post_event(&hw->sm, CSIO_HWE_QUIESCED); 2911 break; 2912 2913 case CSIO_HWE_FATAL: 2914 csio_set_state(&hw->sm, csio_hws_uninit); 2915 break; 2916 2917 default: 2918 CSIO_INC_STATS(hw, n_evt_unexp); 2919 break; 2920 } 2921 } 2922 2923 /* 2924 * csio_hws_quiescing - Quiescing state 2925 * @hw - HW module 2926 * @evt - Event 2927 * 2928 */ 2929 static void 2930 csio_hws_quiescing(struct csio_hw *hw, enum csio_hw_ev evt) 2931 { 2932 hw->prev_evt = hw->cur_evt; 2933 hw->cur_evt = evt; 2934 CSIO_INC_STATS(hw, n_evt_sm[evt]); 2935 2936 switch (evt) { 2937 case CSIO_HWE_QUIESCED: 2938 switch (hw->evtflag) { 2939 case CSIO_HWE_FW_DLOAD: 2940 csio_set_state(&hw->sm, csio_hws_resetting); 2941 /* Download firmware */ 2942 fallthrough; 2943 2944 case CSIO_HWE_HBA_RESET: 2945 csio_set_state(&hw->sm, csio_hws_resetting); 2946 /* Start reset of the HBA */ 2947 csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWRESET); 2948 csio_wr_destroy_queues(hw, false); 2949 csio_do_reset(hw, false); 2950 csio_post_event(&hw->sm, CSIO_HWE_HBA_RESET_DONE); 2951 break; 2952 2953 case CSIO_HWE_PCI_REMOVE: 2954 csio_set_state(&hw->sm, csio_hws_removing); 2955 csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWREMOVE); 2956 csio_wr_destroy_queues(hw, true); 2957 /* Now send the bye command */ 2958 csio_do_bye(hw); 2959 break; 2960 2961 case CSIO_HWE_SUSPEND: 2962 csio_set_state(&hw->sm, csio_hws_quiesced); 2963 break; 2964 2965 case CSIO_HWE_PCIERR_DETECTED: 2966 csio_set_state(&hw->sm, csio_hws_pcierr); 2967 csio_wr_destroy_queues(hw, false); 2968 break; 2969 2970 default: 2971 CSIO_INC_STATS(hw, n_evt_unexp); 2972 break; 2973 2974 } 2975 break; 2976 2977 default: 2978 CSIO_INC_STATS(hw, n_evt_unexp); 2979 break; 2980 } 2981 } 2982 2983 /* 2984 * csio_hws_quiesced - Quiesced state 2985 * @hw - HW module 2986 * @evt - Event 2987 * 2988 */ 2989 static void 2990 csio_hws_quiesced(struct csio_hw *hw, enum csio_hw_ev evt) 2991 { 2992 hw->prev_evt = hw->cur_evt; 2993 hw->cur_evt = evt; 2994 CSIO_INC_STATS(hw, n_evt_sm[evt]); 2995 2996 switch (evt) { 2997 case CSIO_HWE_RESUME: 2998 csio_set_state(&hw->sm, csio_hws_configuring); 2999 csio_hw_configure(hw); 3000 break; 3001 3002 default: 3003 CSIO_INC_STATS(hw, n_evt_unexp); 3004 break; 3005 } 3006 } 3007 3008 /* 3009 * csio_hws_resetting - HW Resetting state 3010 * @hw - HW module 3011 * @evt - Event 3012 * 3013 */ 3014 static void 3015 csio_hws_resetting(struct csio_hw *hw, enum csio_hw_ev evt) 3016 { 3017 hw->prev_evt = hw->cur_evt; 3018 hw->cur_evt = evt; 3019 CSIO_INC_STATS(hw, n_evt_sm[evt]); 3020 3021 switch (evt) { 3022 case CSIO_HWE_HBA_RESET_DONE: 3023 csio_evtq_start(hw); 3024 csio_set_state(&hw->sm, csio_hws_configuring); 3025 csio_hw_configure(hw); 3026 break; 3027 3028 default: 3029 CSIO_INC_STATS(hw, n_evt_unexp); 3030 break; 3031 } 3032 } 3033 3034 /* 3035 * csio_hws_removing - PCI Hotplug removing state 3036 * @hw - HW module 3037 * @evt - Event 3038 * 3039 */ 3040 static void 3041 csio_hws_removing(struct csio_hw *hw, enum csio_hw_ev evt) 3042 { 3043 hw->prev_evt = hw->cur_evt; 3044 hw->cur_evt = evt; 3045 CSIO_INC_STATS(hw, n_evt_sm[evt]); 3046 3047 switch (evt) { 3048 case CSIO_HWE_HBA_RESET: 3049 if (!csio_is_hw_master(hw)) 3050 break; 3051 /* 3052 * The BYE should have already been issued, so we can't 3053 * use the mailbox interface. Hence we use the PL_RST 3054 * register directly. 3055 */ 3056 csio_err(hw, "Resetting HW and waiting 2 seconds...\n"); 3057 csio_wr_reg32(hw, PIORSTMODE_F | PIORST_F, PL_RST_A); 3058 mdelay(2000); 3059 break; 3060 3061 /* Should never receive any new events */ 3062 default: 3063 CSIO_INC_STATS(hw, n_evt_unexp); 3064 break; 3065 3066 } 3067 } 3068 3069 /* 3070 * csio_hws_pcierr - PCI Error state 3071 * @hw - HW module 3072 * @evt - Event 3073 * 3074 */ 3075 static void 3076 csio_hws_pcierr(struct csio_hw *hw, enum csio_hw_ev evt) 3077 { 3078 hw->prev_evt = hw->cur_evt; 3079 hw->cur_evt = evt; 3080 CSIO_INC_STATS(hw, n_evt_sm[evt]); 3081 3082 switch (evt) { 3083 case CSIO_HWE_PCIERR_SLOT_RESET: 3084 csio_evtq_start(hw); 3085 csio_set_state(&hw->sm, csio_hws_configuring); 3086 csio_hw_configure(hw); 3087 break; 3088 3089 default: 3090 CSIO_INC_STATS(hw, n_evt_unexp); 3091 break; 3092 } 3093 } 3094 3095 /*****************************************************************************/ 3096 /* END: HW SM */ 3097 /*****************************************************************************/ 3098 3099 /* 3100 * csio_handle_intr_status - table driven interrupt handler 3101 * @hw: HW instance 3102 * @reg: the interrupt status register to process 3103 * @acts: table of interrupt actions 3104 * 3105 * A table driven interrupt handler that applies a set of masks to an 3106 * interrupt status word and performs the corresponding actions if the 3107 * interrupts described by the mask have occurred. The actions include 3108 * optionally emitting a warning or alert message. The table is terminated 3109 * by an entry specifying mask 0. Returns the number of fatal interrupt 3110 * conditions. 3111 */ 3112 int 3113 csio_handle_intr_status(struct csio_hw *hw, unsigned int reg, 3114 const struct intr_info *acts) 3115 { 3116 int fatal = 0; 3117 unsigned int mask = 0; 3118 unsigned int status = csio_rd_reg32(hw, reg); 3119 3120 for ( ; acts->mask; ++acts) { 3121 if (!(status & acts->mask)) 3122 continue; 3123 if (acts->fatal) { 3124 fatal++; 3125 csio_fatal(hw, "Fatal %s (0x%x)\n", 3126 acts->msg, status & acts->mask); 3127 } else if (acts->msg) 3128 csio_info(hw, "%s (0x%x)\n", 3129 acts->msg, status & acts->mask); 3130 mask |= acts->mask; 3131 } 3132 status &= mask; 3133 if (status) /* clear processed interrupts */ 3134 csio_wr_reg32(hw, status, reg); 3135 return fatal; 3136 } 3137 3138 /* 3139 * TP interrupt handler. 3140 */ 3141 static void csio_tp_intr_handler(struct csio_hw *hw) 3142 { 3143 static struct intr_info tp_intr_info[] = { 3144 { 0x3fffffff, "TP parity error", -1, 1 }, 3145 { FLMTXFLSTEMPTY_F, "TP out of Tx pages", -1, 1 }, 3146 { 0, NULL, 0, 0 } 3147 }; 3148 3149 if (csio_handle_intr_status(hw, TP_INT_CAUSE_A, tp_intr_info)) 3150 csio_hw_fatal_err(hw); 3151 } 3152 3153 /* 3154 * SGE interrupt handler. 3155 */ 3156 static void csio_sge_intr_handler(struct csio_hw *hw) 3157 { 3158 uint64_t v; 3159 3160 static struct intr_info sge_intr_info[] = { 3161 { ERR_CPL_EXCEED_IQE_SIZE_F, 3162 "SGE received CPL exceeding IQE size", -1, 1 }, 3163 { ERR_INVALID_CIDX_INC_F, 3164 "SGE GTS CIDX increment too large", -1, 0 }, 3165 { ERR_CPL_OPCODE_0_F, "SGE received 0-length CPL", -1, 0 }, 3166 { ERR_DROPPED_DB_F, "SGE doorbell dropped", -1, 0 }, 3167 { ERR_DATA_CPL_ON_HIGH_QID1_F | ERR_DATA_CPL_ON_HIGH_QID0_F, 3168 "SGE IQID > 1023 received CPL for FL", -1, 0 }, 3169 { ERR_BAD_DB_PIDX3_F, "SGE DBP 3 pidx increment too large", -1, 3170 0 }, 3171 { ERR_BAD_DB_PIDX2_F, "SGE DBP 2 pidx increment too large", -1, 3172 0 }, 3173 { ERR_BAD_DB_PIDX1_F, "SGE DBP 1 pidx increment too large", -1, 3174 0 }, 3175 { ERR_BAD_DB_PIDX0_F, "SGE DBP 0 pidx increment too large", -1, 3176 0 }, 3177 { ERR_ING_CTXT_PRIO_F, 3178 "SGE too many priority ingress contexts", -1, 0 }, 3179 { ERR_EGR_CTXT_PRIO_F, 3180 "SGE too many priority egress contexts", -1, 0 }, 3181 { INGRESS_SIZE_ERR_F, "SGE illegal ingress QID", -1, 0 }, 3182 { EGRESS_SIZE_ERR_F, "SGE illegal egress QID", -1, 0 }, 3183 { 0, NULL, 0, 0 } 3184 }; 3185 3186 v = (uint64_t)csio_rd_reg32(hw, SGE_INT_CAUSE1_A) | 3187 ((uint64_t)csio_rd_reg32(hw, SGE_INT_CAUSE2_A) << 32); 3188 if (v) { 3189 csio_fatal(hw, "SGE parity error (%#llx)\n", 3190 (unsigned long long)v); 3191 csio_wr_reg32(hw, (uint32_t)(v & 0xFFFFFFFF), 3192 SGE_INT_CAUSE1_A); 3193 csio_wr_reg32(hw, (uint32_t)(v >> 32), SGE_INT_CAUSE2_A); 3194 } 3195 3196 v |= csio_handle_intr_status(hw, SGE_INT_CAUSE3_A, sge_intr_info); 3197 3198 if (csio_handle_intr_status(hw, SGE_INT_CAUSE3_A, sge_intr_info) || 3199 v != 0) 3200 csio_hw_fatal_err(hw); 3201 } 3202 3203 #define CIM_OBQ_INTR (OBQULP0PARERR_F | OBQULP1PARERR_F | OBQULP2PARERR_F |\ 3204 OBQULP3PARERR_F | OBQSGEPARERR_F | OBQNCSIPARERR_F) 3205 #define CIM_IBQ_INTR (IBQTP0PARERR_F | IBQTP1PARERR_F | IBQULPPARERR_F |\ 3206 IBQSGEHIPARERR_F | IBQSGELOPARERR_F | IBQNCSIPARERR_F) 3207 3208 /* 3209 * CIM interrupt handler. 3210 */ 3211 static void csio_cim_intr_handler(struct csio_hw *hw) 3212 { 3213 static struct intr_info cim_intr_info[] = { 3214 { PREFDROPINT_F, "CIM control register prefetch drop", -1, 1 }, 3215 { CIM_OBQ_INTR, "CIM OBQ parity error", -1, 1 }, 3216 { CIM_IBQ_INTR, "CIM IBQ parity error", -1, 1 }, 3217 { MBUPPARERR_F, "CIM mailbox uP parity error", -1, 1 }, 3218 { MBHOSTPARERR_F, "CIM mailbox host parity error", -1, 1 }, 3219 { TIEQINPARERRINT_F, "CIM TIEQ outgoing parity error", -1, 1 }, 3220 { TIEQOUTPARERRINT_F, "CIM TIEQ incoming parity error", -1, 1 }, 3221 { 0, NULL, 0, 0 } 3222 }; 3223 static struct intr_info cim_upintr_info[] = { 3224 { RSVDSPACEINT_F, "CIM reserved space access", -1, 1 }, 3225 { ILLTRANSINT_F, "CIM illegal transaction", -1, 1 }, 3226 { ILLWRINT_F, "CIM illegal write", -1, 1 }, 3227 { ILLRDINT_F, "CIM illegal read", -1, 1 }, 3228 { ILLRDBEINT_F, "CIM illegal read BE", -1, 1 }, 3229 { ILLWRBEINT_F, "CIM illegal write BE", -1, 1 }, 3230 { SGLRDBOOTINT_F, "CIM single read from boot space", -1, 1 }, 3231 { SGLWRBOOTINT_F, "CIM single write to boot space", -1, 1 }, 3232 { BLKWRBOOTINT_F, "CIM block write to boot space", -1, 1 }, 3233 { SGLRDFLASHINT_F, "CIM single read from flash space", -1, 1 }, 3234 { SGLWRFLASHINT_F, "CIM single write to flash space", -1, 1 }, 3235 { BLKWRFLASHINT_F, "CIM block write to flash space", -1, 1 }, 3236 { SGLRDEEPROMINT_F, "CIM single EEPROM read", -1, 1 }, 3237 { SGLWREEPROMINT_F, "CIM single EEPROM write", -1, 1 }, 3238 { BLKRDEEPROMINT_F, "CIM block EEPROM read", -1, 1 }, 3239 { BLKWREEPROMINT_F, "CIM block EEPROM write", -1, 1 }, 3240 { SGLRDCTLINT_F, "CIM single read from CTL space", -1, 1 }, 3241 { SGLWRCTLINT_F, "CIM single write to CTL space", -1, 1 }, 3242 { BLKRDCTLINT_F, "CIM block read from CTL space", -1, 1 }, 3243 { BLKWRCTLINT_F, "CIM block write to CTL space", -1, 1 }, 3244 { SGLRDPLINT_F, "CIM single read from PL space", -1, 1 }, 3245 { SGLWRPLINT_F, "CIM single write to PL space", -1, 1 }, 3246 { BLKRDPLINT_F, "CIM block read from PL space", -1, 1 }, 3247 { BLKWRPLINT_F, "CIM block write to PL space", -1, 1 }, 3248 { REQOVRLOOKUPINT_F, "CIM request FIFO overwrite", -1, 1 }, 3249 { RSPOVRLOOKUPINT_F, "CIM response FIFO overwrite", -1, 1 }, 3250 { TIMEOUTINT_F, "CIM PIF timeout", -1, 1 }, 3251 { TIMEOUTMAINT_F, "CIM PIF MA timeout", -1, 1 }, 3252 { 0, NULL, 0, 0 } 3253 }; 3254 3255 int fat; 3256 3257 fat = csio_handle_intr_status(hw, CIM_HOST_INT_CAUSE_A, 3258 cim_intr_info) + 3259 csio_handle_intr_status(hw, CIM_HOST_UPACC_INT_CAUSE_A, 3260 cim_upintr_info); 3261 if (fat) 3262 csio_hw_fatal_err(hw); 3263 } 3264 3265 /* 3266 * ULP RX interrupt handler. 3267 */ 3268 static void csio_ulprx_intr_handler(struct csio_hw *hw) 3269 { 3270 static struct intr_info ulprx_intr_info[] = { 3271 { 0x1800000, "ULPRX context error", -1, 1 }, 3272 { 0x7fffff, "ULPRX parity error", -1, 1 }, 3273 { 0, NULL, 0, 0 } 3274 }; 3275 3276 if (csio_handle_intr_status(hw, ULP_RX_INT_CAUSE_A, ulprx_intr_info)) 3277 csio_hw_fatal_err(hw); 3278 } 3279 3280 /* 3281 * ULP TX interrupt handler. 3282 */ 3283 static void csio_ulptx_intr_handler(struct csio_hw *hw) 3284 { 3285 static struct intr_info ulptx_intr_info[] = { 3286 { PBL_BOUND_ERR_CH3_F, "ULPTX channel 3 PBL out of bounds", -1, 3287 0 }, 3288 { PBL_BOUND_ERR_CH2_F, "ULPTX channel 2 PBL out of bounds", -1, 3289 0 }, 3290 { PBL_BOUND_ERR_CH1_F, "ULPTX channel 1 PBL out of bounds", -1, 3291 0 }, 3292 { PBL_BOUND_ERR_CH0_F, "ULPTX channel 0 PBL out of bounds", -1, 3293 0 }, 3294 { 0xfffffff, "ULPTX parity error", -1, 1 }, 3295 { 0, NULL, 0, 0 } 3296 }; 3297 3298 if (csio_handle_intr_status(hw, ULP_TX_INT_CAUSE_A, ulptx_intr_info)) 3299 csio_hw_fatal_err(hw); 3300 } 3301 3302 /* 3303 * PM TX interrupt handler. 3304 */ 3305 static void csio_pmtx_intr_handler(struct csio_hw *hw) 3306 { 3307 static struct intr_info pmtx_intr_info[] = { 3308 { PCMD_LEN_OVFL0_F, "PMTX channel 0 pcmd too large", -1, 1 }, 3309 { PCMD_LEN_OVFL1_F, "PMTX channel 1 pcmd too large", -1, 1 }, 3310 { PCMD_LEN_OVFL2_F, "PMTX channel 2 pcmd too large", -1, 1 }, 3311 { ZERO_C_CMD_ERROR_F, "PMTX 0-length pcmd", -1, 1 }, 3312 { 0xffffff0, "PMTX framing error", -1, 1 }, 3313 { OESPI_PAR_ERROR_F, "PMTX oespi parity error", -1, 1 }, 3314 { DB_OPTIONS_PAR_ERROR_F, "PMTX db_options parity error", -1, 3315 1 }, 3316 { ICSPI_PAR_ERROR_F, "PMTX icspi parity error", -1, 1 }, 3317 { PMTX_C_PCMD_PAR_ERROR_F, "PMTX c_pcmd parity error", -1, 1}, 3318 { 0, NULL, 0, 0 } 3319 }; 3320 3321 if (csio_handle_intr_status(hw, PM_TX_INT_CAUSE_A, pmtx_intr_info)) 3322 csio_hw_fatal_err(hw); 3323 } 3324 3325 /* 3326 * PM RX interrupt handler. 3327 */ 3328 static void csio_pmrx_intr_handler(struct csio_hw *hw) 3329 { 3330 static struct intr_info pmrx_intr_info[] = { 3331 { ZERO_E_CMD_ERROR_F, "PMRX 0-length pcmd", -1, 1 }, 3332 { 0x3ffff0, "PMRX framing error", -1, 1 }, 3333 { OCSPI_PAR_ERROR_F, "PMRX ocspi parity error", -1, 1 }, 3334 { DB_OPTIONS_PAR_ERROR_F, "PMRX db_options parity error", -1, 3335 1 }, 3336 { IESPI_PAR_ERROR_F, "PMRX iespi parity error", -1, 1 }, 3337 { PMRX_E_PCMD_PAR_ERROR_F, "PMRX e_pcmd parity error", -1, 1}, 3338 { 0, NULL, 0, 0 } 3339 }; 3340 3341 if (csio_handle_intr_status(hw, PM_RX_INT_CAUSE_A, pmrx_intr_info)) 3342 csio_hw_fatal_err(hw); 3343 } 3344 3345 /* 3346 * CPL switch interrupt handler. 3347 */ 3348 static void csio_cplsw_intr_handler(struct csio_hw *hw) 3349 { 3350 static struct intr_info cplsw_intr_info[] = { 3351 { CIM_OP_MAP_PERR_F, "CPLSW CIM op_map parity error", -1, 1 }, 3352 { CIM_OVFL_ERROR_F, "CPLSW CIM overflow", -1, 1 }, 3353 { TP_FRAMING_ERROR_F, "CPLSW TP framing error", -1, 1 }, 3354 { SGE_FRAMING_ERROR_F, "CPLSW SGE framing error", -1, 1 }, 3355 { CIM_FRAMING_ERROR_F, "CPLSW CIM framing error", -1, 1 }, 3356 { ZERO_SWITCH_ERROR_F, "CPLSW no-switch error", -1, 1 }, 3357 { 0, NULL, 0, 0 } 3358 }; 3359 3360 if (csio_handle_intr_status(hw, CPL_INTR_CAUSE_A, cplsw_intr_info)) 3361 csio_hw_fatal_err(hw); 3362 } 3363 3364 /* 3365 * LE interrupt handler. 3366 */ 3367 static void csio_le_intr_handler(struct csio_hw *hw) 3368 { 3369 enum chip_type chip = CHELSIO_CHIP_VERSION(hw->chip_id); 3370 3371 static struct intr_info le_intr_info[] = { 3372 { LIPMISS_F, "LE LIP miss", -1, 0 }, 3373 { LIP0_F, "LE 0 LIP error", -1, 0 }, 3374 { PARITYERR_F, "LE parity error", -1, 1 }, 3375 { UNKNOWNCMD_F, "LE unknown command", -1, 1 }, 3376 { REQQPARERR_F, "LE request queue parity error", -1, 1 }, 3377 { 0, NULL, 0, 0 } 3378 }; 3379 3380 static struct intr_info t6_le_intr_info[] = { 3381 { T6_LIPMISS_F, "LE LIP miss", -1, 0 }, 3382 { T6_LIP0_F, "LE 0 LIP error", -1, 0 }, 3383 { TCAMINTPERR_F, "LE parity error", -1, 1 }, 3384 { T6_UNKNOWNCMD_F, "LE unknown command", -1, 1 }, 3385 { SSRAMINTPERR_F, "LE request queue parity error", -1, 1 }, 3386 { 0, NULL, 0, 0 } 3387 }; 3388 3389 if (csio_handle_intr_status(hw, LE_DB_INT_CAUSE_A, 3390 (chip == CHELSIO_T5) ? 3391 le_intr_info : t6_le_intr_info)) 3392 csio_hw_fatal_err(hw); 3393 } 3394 3395 /* 3396 * MPS interrupt handler. 3397 */ 3398 static void csio_mps_intr_handler(struct csio_hw *hw) 3399 { 3400 static struct intr_info mps_rx_intr_info[] = { 3401 { 0xffffff, "MPS Rx parity error", -1, 1 }, 3402 { 0, NULL, 0, 0 } 3403 }; 3404 static struct intr_info mps_tx_intr_info[] = { 3405 { TPFIFO_V(TPFIFO_M), "MPS Tx TP FIFO parity error", -1, 1 }, 3406 { NCSIFIFO_F, "MPS Tx NC-SI FIFO parity error", -1, 1 }, 3407 { TXDATAFIFO_V(TXDATAFIFO_M), "MPS Tx data FIFO parity error", 3408 -1, 1 }, 3409 { TXDESCFIFO_V(TXDESCFIFO_M), "MPS Tx desc FIFO parity error", 3410 -1, 1 }, 3411 { BUBBLE_F, "MPS Tx underflow", -1, 1 }, 3412 { SECNTERR_F, "MPS Tx SOP/EOP error", -1, 1 }, 3413 { FRMERR_F, "MPS Tx framing error", -1, 1 }, 3414 { 0, NULL, 0, 0 } 3415 }; 3416 static struct intr_info mps_trc_intr_info[] = { 3417 { FILTMEM_V(FILTMEM_M), "MPS TRC filter parity error", -1, 1 }, 3418 { PKTFIFO_V(PKTFIFO_M), "MPS TRC packet FIFO parity error", 3419 -1, 1 }, 3420 { MISCPERR_F, "MPS TRC misc parity error", -1, 1 }, 3421 { 0, NULL, 0, 0 } 3422 }; 3423 static struct intr_info mps_stat_sram_intr_info[] = { 3424 { 0x1fffff, "MPS statistics SRAM parity error", -1, 1 }, 3425 { 0, NULL, 0, 0 } 3426 }; 3427 static struct intr_info mps_stat_tx_intr_info[] = { 3428 { 0xfffff, "MPS statistics Tx FIFO parity error", -1, 1 }, 3429 { 0, NULL, 0, 0 } 3430 }; 3431 static struct intr_info mps_stat_rx_intr_info[] = { 3432 { 0xffffff, "MPS statistics Rx FIFO parity error", -1, 1 }, 3433 { 0, NULL, 0, 0 } 3434 }; 3435 static struct intr_info mps_cls_intr_info[] = { 3436 { MATCHSRAM_F, "MPS match SRAM parity error", -1, 1 }, 3437 { MATCHTCAM_F, "MPS match TCAM parity error", -1, 1 }, 3438 { HASHSRAM_F, "MPS hash SRAM parity error", -1, 1 }, 3439 { 0, NULL, 0, 0 } 3440 }; 3441 3442 int fat; 3443 3444 fat = csio_handle_intr_status(hw, MPS_RX_PERR_INT_CAUSE_A, 3445 mps_rx_intr_info) + 3446 csio_handle_intr_status(hw, MPS_TX_INT_CAUSE_A, 3447 mps_tx_intr_info) + 3448 csio_handle_intr_status(hw, MPS_TRC_INT_CAUSE_A, 3449 mps_trc_intr_info) + 3450 csio_handle_intr_status(hw, MPS_STAT_PERR_INT_CAUSE_SRAM_A, 3451 mps_stat_sram_intr_info) + 3452 csio_handle_intr_status(hw, MPS_STAT_PERR_INT_CAUSE_TX_FIFO_A, 3453 mps_stat_tx_intr_info) + 3454 csio_handle_intr_status(hw, MPS_STAT_PERR_INT_CAUSE_RX_FIFO_A, 3455 mps_stat_rx_intr_info) + 3456 csio_handle_intr_status(hw, MPS_CLS_INT_CAUSE_A, 3457 mps_cls_intr_info); 3458 3459 csio_wr_reg32(hw, 0, MPS_INT_CAUSE_A); 3460 csio_rd_reg32(hw, MPS_INT_CAUSE_A); /* flush */ 3461 if (fat) 3462 csio_hw_fatal_err(hw); 3463 } 3464 3465 #define MEM_INT_MASK (PERR_INT_CAUSE_F | ECC_CE_INT_CAUSE_F | \ 3466 ECC_UE_INT_CAUSE_F) 3467 3468 /* 3469 * EDC/MC interrupt handler. 3470 */ 3471 static void csio_mem_intr_handler(struct csio_hw *hw, int idx) 3472 { 3473 static const char name[3][5] = { "EDC0", "EDC1", "MC" }; 3474 3475 unsigned int addr, cnt_addr, v; 3476 3477 if (idx <= MEM_EDC1) { 3478 addr = EDC_REG(EDC_INT_CAUSE_A, idx); 3479 cnt_addr = EDC_REG(EDC_ECC_STATUS_A, idx); 3480 } else { 3481 addr = MC_INT_CAUSE_A; 3482 cnt_addr = MC_ECC_STATUS_A; 3483 } 3484 3485 v = csio_rd_reg32(hw, addr) & MEM_INT_MASK; 3486 if (v & PERR_INT_CAUSE_F) 3487 csio_fatal(hw, "%s FIFO parity error\n", name[idx]); 3488 if (v & ECC_CE_INT_CAUSE_F) { 3489 uint32_t cnt = ECC_CECNT_G(csio_rd_reg32(hw, cnt_addr)); 3490 3491 csio_wr_reg32(hw, ECC_CECNT_V(ECC_CECNT_M), cnt_addr); 3492 csio_warn(hw, "%u %s correctable ECC data error%s\n", 3493 cnt, name[idx], cnt > 1 ? "s" : ""); 3494 } 3495 if (v & ECC_UE_INT_CAUSE_F) 3496 csio_fatal(hw, "%s uncorrectable ECC data error\n", name[idx]); 3497 3498 csio_wr_reg32(hw, v, addr); 3499 if (v & (PERR_INT_CAUSE_F | ECC_UE_INT_CAUSE_F)) 3500 csio_hw_fatal_err(hw); 3501 } 3502 3503 /* 3504 * MA interrupt handler. 3505 */ 3506 static void csio_ma_intr_handler(struct csio_hw *hw) 3507 { 3508 uint32_t v, status = csio_rd_reg32(hw, MA_INT_CAUSE_A); 3509 3510 if (status & MEM_PERR_INT_CAUSE_F) 3511 csio_fatal(hw, "MA parity error, parity status %#x\n", 3512 csio_rd_reg32(hw, MA_PARITY_ERROR_STATUS_A)); 3513 if (status & MEM_WRAP_INT_CAUSE_F) { 3514 v = csio_rd_reg32(hw, MA_INT_WRAP_STATUS_A); 3515 csio_fatal(hw, 3516 "MA address wrap-around error by client %u to address %#x\n", 3517 MEM_WRAP_CLIENT_NUM_G(v), MEM_WRAP_ADDRESS_G(v) << 4); 3518 } 3519 csio_wr_reg32(hw, status, MA_INT_CAUSE_A); 3520 csio_hw_fatal_err(hw); 3521 } 3522 3523 /* 3524 * SMB interrupt handler. 3525 */ 3526 static void csio_smb_intr_handler(struct csio_hw *hw) 3527 { 3528 static struct intr_info smb_intr_info[] = { 3529 { MSTTXFIFOPARINT_F, "SMB master Tx FIFO parity error", -1, 1 }, 3530 { MSTRXFIFOPARINT_F, "SMB master Rx FIFO parity error", -1, 1 }, 3531 { SLVFIFOPARINT_F, "SMB slave FIFO parity error", -1, 1 }, 3532 { 0, NULL, 0, 0 } 3533 }; 3534 3535 if (csio_handle_intr_status(hw, SMB_INT_CAUSE_A, smb_intr_info)) 3536 csio_hw_fatal_err(hw); 3537 } 3538 3539 /* 3540 * NC-SI interrupt handler. 3541 */ 3542 static void csio_ncsi_intr_handler(struct csio_hw *hw) 3543 { 3544 static struct intr_info ncsi_intr_info[] = { 3545 { CIM_DM_PRTY_ERR_F, "NC-SI CIM parity error", -1, 1 }, 3546 { MPS_DM_PRTY_ERR_F, "NC-SI MPS parity error", -1, 1 }, 3547 { TXFIFO_PRTY_ERR_F, "NC-SI Tx FIFO parity error", -1, 1 }, 3548 { RXFIFO_PRTY_ERR_F, "NC-SI Rx FIFO parity error", -1, 1 }, 3549 { 0, NULL, 0, 0 } 3550 }; 3551 3552 if (csio_handle_intr_status(hw, NCSI_INT_CAUSE_A, ncsi_intr_info)) 3553 csio_hw_fatal_err(hw); 3554 } 3555 3556 /* 3557 * XGMAC interrupt handler. 3558 */ 3559 static void csio_xgmac_intr_handler(struct csio_hw *hw, int port) 3560 { 3561 uint32_t v = csio_rd_reg32(hw, T5_PORT_REG(port, MAC_PORT_INT_CAUSE_A)); 3562 3563 v &= TXFIFO_PRTY_ERR_F | RXFIFO_PRTY_ERR_F; 3564 if (!v) 3565 return; 3566 3567 if (v & TXFIFO_PRTY_ERR_F) 3568 csio_fatal(hw, "XGMAC %d Tx FIFO parity error\n", port); 3569 if (v & RXFIFO_PRTY_ERR_F) 3570 csio_fatal(hw, "XGMAC %d Rx FIFO parity error\n", port); 3571 csio_wr_reg32(hw, v, T5_PORT_REG(port, MAC_PORT_INT_CAUSE_A)); 3572 csio_hw_fatal_err(hw); 3573 } 3574 3575 /* 3576 * PL interrupt handler. 3577 */ 3578 static void csio_pl_intr_handler(struct csio_hw *hw) 3579 { 3580 static struct intr_info pl_intr_info[] = { 3581 { FATALPERR_F, "T4 fatal parity error", -1, 1 }, 3582 { PERRVFID_F, "PL VFID_MAP parity error", -1, 1 }, 3583 { 0, NULL, 0, 0 } 3584 }; 3585 3586 if (csio_handle_intr_status(hw, PL_PL_INT_CAUSE_A, pl_intr_info)) 3587 csio_hw_fatal_err(hw); 3588 } 3589 3590 /* 3591 * csio_hw_slow_intr_handler - control path interrupt handler 3592 * @hw: HW module 3593 * 3594 * Interrupt handler for non-data global interrupt events, e.g., errors. 3595 * The designation 'slow' is because it involves register reads, while 3596 * data interrupts typically don't involve any MMIOs. 3597 */ 3598 int 3599 csio_hw_slow_intr_handler(struct csio_hw *hw) 3600 { 3601 uint32_t cause = csio_rd_reg32(hw, PL_INT_CAUSE_A); 3602 3603 if (!(cause & CSIO_GLBL_INTR_MASK)) { 3604 CSIO_INC_STATS(hw, n_plint_unexp); 3605 return 0; 3606 } 3607 3608 csio_dbg(hw, "Slow interrupt! cause: 0x%x\n", cause); 3609 3610 CSIO_INC_STATS(hw, n_plint_cnt); 3611 3612 if (cause & CIM_F) 3613 csio_cim_intr_handler(hw); 3614 3615 if (cause & MPS_F) 3616 csio_mps_intr_handler(hw); 3617 3618 if (cause & NCSI_F) 3619 csio_ncsi_intr_handler(hw); 3620 3621 if (cause & PL_F) 3622 csio_pl_intr_handler(hw); 3623 3624 if (cause & SMB_F) 3625 csio_smb_intr_handler(hw); 3626 3627 if (cause & XGMAC0_F) 3628 csio_xgmac_intr_handler(hw, 0); 3629 3630 if (cause & XGMAC1_F) 3631 csio_xgmac_intr_handler(hw, 1); 3632 3633 if (cause & XGMAC_KR0_F) 3634 csio_xgmac_intr_handler(hw, 2); 3635 3636 if (cause & XGMAC_KR1_F) 3637 csio_xgmac_intr_handler(hw, 3); 3638 3639 if (cause & PCIE_F) 3640 hw->chip_ops->chip_pcie_intr_handler(hw); 3641 3642 if (cause & MC_F) 3643 csio_mem_intr_handler(hw, MEM_MC); 3644 3645 if (cause & EDC0_F) 3646 csio_mem_intr_handler(hw, MEM_EDC0); 3647 3648 if (cause & EDC1_F) 3649 csio_mem_intr_handler(hw, MEM_EDC1); 3650 3651 if (cause & LE_F) 3652 csio_le_intr_handler(hw); 3653 3654 if (cause & TP_F) 3655 csio_tp_intr_handler(hw); 3656 3657 if (cause & MA_F) 3658 csio_ma_intr_handler(hw); 3659 3660 if (cause & PM_TX_F) 3661 csio_pmtx_intr_handler(hw); 3662 3663 if (cause & PM_RX_F) 3664 csio_pmrx_intr_handler(hw); 3665 3666 if (cause & ULP_RX_F) 3667 csio_ulprx_intr_handler(hw); 3668 3669 if (cause & CPL_SWITCH_F) 3670 csio_cplsw_intr_handler(hw); 3671 3672 if (cause & SGE_F) 3673 csio_sge_intr_handler(hw); 3674 3675 if (cause & ULP_TX_F) 3676 csio_ulptx_intr_handler(hw); 3677 3678 /* Clear the interrupts just processed for which we are the master. */ 3679 csio_wr_reg32(hw, cause & CSIO_GLBL_INTR_MASK, PL_INT_CAUSE_A); 3680 csio_rd_reg32(hw, PL_INT_CAUSE_A); /* flush */ 3681 3682 return 1; 3683 } 3684 3685 /***************************************************************************** 3686 * HW <--> mailbox interfacing routines. 3687 ****************************************************************************/ 3688 /* 3689 * csio_mberr_worker - Worker thread (dpc) for mailbox/error completions 3690 * 3691 * @data: Private data pointer. 3692 * 3693 * Called from worker thread context. 3694 */ 3695 static void 3696 csio_mberr_worker(void *data) 3697 { 3698 struct csio_hw *hw = (struct csio_hw *)data; 3699 struct csio_mbm *mbm = &hw->mbm; 3700 LIST_HEAD(cbfn_q); 3701 struct csio_mb *mbp_next; 3702 int rv; 3703 3704 del_timer_sync(&mbm->timer); 3705 3706 spin_lock_irq(&hw->lock); 3707 if (list_empty(&mbm->cbfn_q)) { 3708 spin_unlock_irq(&hw->lock); 3709 return; 3710 } 3711 3712 list_splice_tail_init(&mbm->cbfn_q, &cbfn_q); 3713 mbm->stats.n_cbfnq = 0; 3714 3715 /* Try to start waiting mailboxes */ 3716 if (!list_empty(&mbm->req_q)) { 3717 mbp_next = list_first_entry(&mbm->req_q, struct csio_mb, list); 3718 list_del_init(&mbp_next->list); 3719 3720 rv = csio_mb_issue(hw, mbp_next); 3721 if (rv != 0) 3722 list_add_tail(&mbp_next->list, &mbm->req_q); 3723 else 3724 CSIO_DEC_STATS(mbm, n_activeq); 3725 } 3726 spin_unlock_irq(&hw->lock); 3727 3728 /* Now callback completions */ 3729 csio_mb_completions(hw, &cbfn_q); 3730 } 3731 3732 /* 3733 * csio_hw_mb_timer - Top-level Mailbox timeout handler. 3734 * 3735 * @data: private data pointer 3736 * 3737 **/ 3738 static void 3739 csio_hw_mb_timer(struct timer_list *t) 3740 { 3741 struct csio_mbm *mbm = from_timer(mbm, t, timer); 3742 struct csio_hw *hw = mbm->hw; 3743 struct csio_mb *mbp = NULL; 3744 3745 spin_lock_irq(&hw->lock); 3746 mbp = csio_mb_tmo_handler(hw); 3747 spin_unlock_irq(&hw->lock); 3748 3749 /* Call back the function for the timed-out Mailbox */ 3750 if (mbp) 3751 mbp->mb_cbfn(hw, mbp); 3752 3753 } 3754 3755 /* 3756 * csio_hw_mbm_cleanup - Cleanup Mailbox module. 3757 * @hw: HW module 3758 * 3759 * Called with lock held, should exit with lock held. 3760 * Cancels outstanding mailboxes (waiting, in-flight) and gathers them 3761 * into a local queue. Drops lock and calls the completions. Holds 3762 * lock and returns. 3763 */ 3764 static void 3765 csio_hw_mbm_cleanup(struct csio_hw *hw) 3766 { 3767 LIST_HEAD(cbfn_q); 3768 3769 csio_mb_cancel_all(hw, &cbfn_q); 3770 3771 spin_unlock_irq(&hw->lock); 3772 csio_mb_completions(hw, &cbfn_q); 3773 spin_lock_irq(&hw->lock); 3774 } 3775 3776 /***************************************************************************** 3777 * Event handling 3778 ****************************************************************************/ 3779 int 3780 csio_enqueue_evt(struct csio_hw *hw, enum csio_evt type, void *evt_msg, 3781 uint16_t len) 3782 { 3783 struct csio_evt_msg *evt_entry = NULL; 3784 3785 if (type >= CSIO_EVT_MAX) 3786 return -EINVAL; 3787 3788 if (len > CSIO_EVT_MSG_SIZE) 3789 return -EINVAL; 3790 3791 if (hw->flags & CSIO_HWF_FWEVT_STOP) 3792 return -EINVAL; 3793 3794 if (list_empty(&hw->evt_free_q)) { 3795 csio_err(hw, "Failed to alloc evt entry, msg type %d len %d\n", 3796 type, len); 3797 return -ENOMEM; 3798 } 3799 3800 evt_entry = list_first_entry(&hw->evt_free_q, 3801 struct csio_evt_msg, list); 3802 list_del_init(&evt_entry->list); 3803 3804 /* copy event msg and queue the event */ 3805 evt_entry->type = type; 3806 memcpy((void *)evt_entry->data, evt_msg, len); 3807 list_add_tail(&evt_entry->list, &hw->evt_active_q); 3808 3809 CSIO_DEC_STATS(hw, n_evt_freeq); 3810 CSIO_INC_STATS(hw, n_evt_activeq); 3811 3812 return 0; 3813 } 3814 3815 static int 3816 csio_enqueue_evt_lock(struct csio_hw *hw, enum csio_evt type, void *evt_msg, 3817 uint16_t len, bool msg_sg) 3818 { 3819 struct csio_evt_msg *evt_entry = NULL; 3820 struct csio_fl_dma_buf *fl_sg; 3821 uint32_t off = 0; 3822 unsigned long flags; 3823 int n, ret = 0; 3824 3825 if (type >= CSIO_EVT_MAX) 3826 return -EINVAL; 3827 3828 if (len > CSIO_EVT_MSG_SIZE) 3829 return -EINVAL; 3830 3831 spin_lock_irqsave(&hw->lock, flags); 3832 if (hw->flags & CSIO_HWF_FWEVT_STOP) { 3833 ret = -EINVAL; 3834 goto out; 3835 } 3836 3837 if (list_empty(&hw->evt_free_q)) { 3838 csio_err(hw, "Failed to alloc evt entry, msg type %d len %d\n", 3839 type, len); 3840 ret = -ENOMEM; 3841 goto out; 3842 } 3843 3844 evt_entry = list_first_entry(&hw->evt_free_q, 3845 struct csio_evt_msg, list); 3846 list_del_init(&evt_entry->list); 3847 3848 /* copy event msg and queue the event */ 3849 evt_entry->type = type; 3850 3851 /* If Payload in SG list*/ 3852 if (msg_sg) { 3853 fl_sg = (struct csio_fl_dma_buf *) evt_msg; 3854 for (n = 0; (n < CSIO_MAX_FLBUF_PER_IQWR && off < len); n++) { 3855 memcpy((void *)((uintptr_t)evt_entry->data + off), 3856 fl_sg->flbufs[n].vaddr, 3857 fl_sg->flbufs[n].len); 3858 off += fl_sg->flbufs[n].len; 3859 } 3860 } else 3861 memcpy((void *)evt_entry->data, evt_msg, len); 3862 3863 list_add_tail(&evt_entry->list, &hw->evt_active_q); 3864 CSIO_DEC_STATS(hw, n_evt_freeq); 3865 CSIO_INC_STATS(hw, n_evt_activeq); 3866 out: 3867 spin_unlock_irqrestore(&hw->lock, flags); 3868 return ret; 3869 } 3870 3871 static void 3872 csio_free_evt(struct csio_hw *hw, struct csio_evt_msg *evt_entry) 3873 { 3874 if (evt_entry) { 3875 spin_lock_irq(&hw->lock); 3876 list_del_init(&evt_entry->list); 3877 list_add_tail(&evt_entry->list, &hw->evt_free_q); 3878 CSIO_DEC_STATS(hw, n_evt_activeq); 3879 CSIO_INC_STATS(hw, n_evt_freeq); 3880 spin_unlock_irq(&hw->lock); 3881 } 3882 } 3883 3884 void 3885 csio_evtq_flush(struct csio_hw *hw) 3886 { 3887 uint32_t count; 3888 count = 30; 3889 while (hw->flags & CSIO_HWF_FWEVT_PENDING && count--) { 3890 spin_unlock_irq(&hw->lock); 3891 msleep(2000); 3892 spin_lock_irq(&hw->lock); 3893 } 3894 3895 CSIO_DB_ASSERT(!(hw->flags & CSIO_HWF_FWEVT_PENDING)); 3896 } 3897 3898 static void 3899 csio_evtq_stop(struct csio_hw *hw) 3900 { 3901 hw->flags |= CSIO_HWF_FWEVT_STOP; 3902 } 3903 3904 static void 3905 csio_evtq_start(struct csio_hw *hw) 3906 { 3907 hw->flags &= ~CSIO_HWF_FWEVT_STOP; 3908 } 3909 3910 static void 3911 csio_evtq_cleanup(struct csio_hw *hw) 3912 { 3913 struct list_head *evt_entry, *next_entry; 3914 3915 /* Release outstanding events from activeq to freeq*/ 3916 if (!list_empty(&hw->evt_active_q)) 3917 list_splice_tail_init(&hw->evt_active_q, &hw->evt_free_q); 3918 3919 hw->stats.n_evt_activeq = 0; 3920 hw->flags &= ~CSIO_HWF_FWEVT_PENDING; 3921 3922 /* Freeup event entry */ 3923 list_for_each_safe(evt_entry, next_entry, &hw->evt_free_q) { 3924 kfree(evt_entry); 3925 CSIO_DEC_STATS(hw, n_evt_freeq); 3926 } 3927 3928 hw->stats.n_evt_freeq = 0; 3929 } 3930 3931 3932 static void 3933 csio_process_fwevtq_entry(struct csio_hw *hw, void *wr, uint32_t len, 3934 struct csio_fl_dma_buf *flb, void *priv) 3935 { 3936 __u8 op; 3937 void *msg = NULL; 3938 uint32_t msg_len = 0; 3939 bool msg_sg = 0; 3940 3941 op = ((struct rss_header *) wr)->opcode; 3942 if (op == CPL_FW6_PLD) { 3943 CSIO_INC_STATS(hw, n_cpl_fw6_pld); 3944 if (!flb || !flb->totlen) { 3945 CSIO_INC_STATS(hw, n_cpl_unexp); 3946 return; 3947 } 3948 3949 msg = (void *) flb; 3950 msg_len = flb->totlen; 3951 msg_sg = 1; 3952 } else if (op == CPL_FW6_MSG || op == CPL_FW4_MSG) { 3953 3954 CSIO_INC_STATS(hw, n_cpl_fw6_msg); 3955 /* skip RSS header */ 3956 msg = (void *)((uintptr_t)wr + sizeof(__be64)); 3957 msg_len = (op == CPL_FW6_MSG) ? sizeof(struct cpl_fw6_msg) : 3958 sizeof(struct cpl_fw4_msg); 3959 } else { 3960 csio_warn(hw, "unexpected CPL %#x on FW event queue\n", op); 3961 CSIO_INC_STATS(hw, n_cpl_unexp); 3962 return; 3963 } 3964 3965 /* 3966 * Enqueue event to EventQ. Events processing happens 3967 * in Event worker thread context 3968 */ 3969 if (csio_enqueue_evt_lock(hw, CSIO_EVT_FW, msg, 3970 (uint16_t)msg_len, msg_sg)) 3971 CSIO_INC_STATS(hw, n_evt_drop); 3972 } 3973 3974 void 3975 csio_evtq_worker(struct work_struct *work) 3976 { 3977 struct csio_hw *hw = container_of(work, struct csio_hw, evtq_work); 3978 struct list_head *evt_entry, *next_entry; 3979 LIST_HEAD(evt_q); 3980 struct csio_evt_msg *evt_msg; 3981 struct cpl_fw6_msg *msg; 3982 struct csio_rnode *rn; 3983 int rv = 0; 3984 uint8_t evtq_stop = 0; 3985 3986 csio_dbg(hw, "event worker thread active evts#%d\n", 3987 hw->stats.n_evt_activeq); 3988 3989 spin_lock_irq(&hw->lock); 3990 while (!list_empty(&hw->evt_active_q)) { 3991 list_splice_tail_init(&hw->evt_active_q, &evt_q); 3992 spin_unlock_irq(&hw->lock); 3993 3994 list_for_each_safe(evt_entry, next_entry, &evt_q) { 3995 evt_msg = (struct csio_evt_msg *) evt_entry; 3996 3997 /* Drop events if queue is STOPPED */ 3998 spin_lock_irq(&hw->lock); 3999 if (hw->flags & CSIO_HWF_FWEVT_STOP) 4000 evtq_stop = 1; 4001 spin_unlock_irq(&hw->lock); 4002 if (evtq_stop) { 4003 CSIO_INC_STATS(hw, n_evt_drop); 4004 goto free_evt; 4005 } 4006 4007 switch (evt_msg->type) { 4008 case CSIO_EVT_FW: 4009 msg = (struct cpl_fw6_msg *)(evt_msg->data); 4010 4011 if ((msg->opcode == CPL_FW6_MSG || 4012 msg->opcode == CPL_FW4_MSG) && 4013 !msg->type) { 4014 rv = csio_mb_fwevt_handler(hw, 4015 msg->data); 4016 if (!rv) 4017 break; 4018 /* Handle any remaining fw events */ 4019 csio_fcoe_fwevt_handler(hw, 4020 msg->opcode, msg->data); 4021 } else if (msg->opcode == CPL_FW6_PLD) { 4022 4023 csio_fcoe_fwevt_handler(hw, 4024 msg->opcode, msg->data); 4025 } else { 4026 csio_warn(hw, 4027 "Unhandled FW msg op %x type %x\n", 4028 msg->opcode, msg->type); 4029 CSIO_INC_STATS(hw, n_evt_drop); 4030 } 4031 break; 4032 4033 case CSIO_EVT_MBX: 4034 csio_mberr_worker(hw); 4035 break; 4036 4037 case CSIO_EVT_DEV_LOSS: 4038 memcpy(&rn, evt_msg->data, sizeof(rn)); 4039 csio_rnode_devloss_handler(rn); 4040 break; 4041 4042 default: 4043 csio_warn(hw, "Unhandled event %x on evtq\n", 4044 evt_msg->type); 4045 CSIO_INC_STATS(hw, n_evt_unexp); 4046 break; 4047 } 4048 free_evt: 4049 csio_free_evt(hw, evt_msg); 4050 } 4051 4052 spin_lock_irq(&hw->lock); 4053 } 4054 hw->flags &= ~CSIO_HWF_FWEVT_PENDING; 4055 spin_unlock_irq(&hw->lock); 4056 } 4057 4058 int 4059 csio_fwevtq_handler(struct csio_hw *hw) 4060 { 4061 int rv; 4062 4063 if (csio_q_iqid(hw, hw->fwevt_iq_idx) == CSIO_MAX_QID) { 4064 CSIO_INC_STATS(hw, n_int_stray); 4065 return -EINVAL; 4066 } 4067 4068 rv = csio_wr_process_iq_idx(hw, hw->fwevt_iq_idx, 4069 csio_process_fwevtq_entry, NULL); 4070 return rv; 4071 } 4072 4073 /**************************************************************************** 4074 * Entry points 4075 ****************************************************************************/ 4076 4077 /* Management module */ 4078 /* 4079 * csio_mgmt_req_lookup - Lookup the given IO req exist in Active Q. 4080 * mgmt - mgmt module 4081 * @io_req - io request 4082 * 4083 * Return - 0:if given IO Req exists in active Q. 4084 * -EINVAL :if lookup fails. 4085 */ 4086 int 4087 csio_mgmt_req_lookup(struct csio_mgmtm *mgmtm, struct csio_ioreq *io_req) 4088 { 4089 struct list_head *tmp; 4090 4091 /* Lookup ioreq in the ACTIVEQ */ 4092 list_for_each(tmp, &mgmtm->active_q) { 4093 if (io_req == (struct csio_ioreq *)tmp) 4094 return 0; 4095 } 4096 return -EINVAL; 4097 } 4098 4099 #define ECM_MIN_TMO 1000 /* Minimum timeout value for req */ 4100 4101 /* 4102 * csio_mgmts_tmo_handler - MGMT IO Timeout handler. 4103 * @data - Event data. 4104 * 4105 * Return - none. 4106 */ 4107 static void 4108 csio_mgmt_tmo_handler(struct timer_list *t) 4109 { 4110 struct csio_mgmtm *mgmtm = from_timer(mgmtm, t, mgmt_timer); 4111 struct list_head *tmp; 4112 struct csio_ioreq *io_req; 4113 4114 csio_dbg(mgmtm->hw, "Mgmt timer invoked!\n"); 4115 4116 spin_lock_irq(&mgmtm->hw->lock); 4117 4118 list_for_each(tmp, &mgmtm->active_q) { 4119 io_req = (struct csio_ioreq *) tmp; 4120 io_req->tmo -= min_t(uint32_t, io_req->tmo, ECM_MIN_TMO); 4121 4122 if (!io_req->tmo) { 4123 /* Dequeue the request from retry Q. */ 4124 tmp = csio_list_prev(tmp); 4125 list_del_init(&io_req->sm.sm_list); 4126 if (io_req->io_cbfn) { 4127 /* io_req will be freed by completion handler */ 4128 io_req->wr_status = -ETIMEDOUT; 4129 io_req->io_cbfn(mgmtm->hw, io_req); 4130 } else { 4131 CSIO_DB_ASSERT(0); 4132 } 4133 } 4134 } 4135 4136 /* If retry queue is not empty, re-arm timer */ 4137 if (!list_empty(&mgmtm->active_q)) 4138 mod_timer(&mgmtm->mgmt_timer, 4139 jiffies + msecs_to_jiffies(ECM_MIN_TMO)); 4140 spin_unlock_irq(&mgmtm->hw->lock); 4141 } 4142 4143 static void 4144 csio_mgmtm_cleanup(struct csio_mgmtm *mgmtm) 4145 { 4146 struct csio_hw *hw = mgmtm->hw; 4147 struct csio_ioreq *io_req; 4148 struct list_head *tmp; 4149 uint32_t count; 4150 4151 count = 30; 4152 /* Wait for all outstanding req to complete gracefully */ 4153 while ((!list_empty(&mgmtm->active_q)) && count--) { 4154 spin_unlock_irq(&hw->lock); 4155 msleep(2000); 4156 spin_lock_irq(&hw->lock); 4157 } 4158 4159 /* release outstanding req from ACTIVEQ */ 4160 list_for_each(tmp, &mgmtm->active_q) { 4161 io_req = (struct csio_ioreq *) tmp; 4162 tmp = csio_list_prev(tmp); 4163 list_del_init(&io_req->sm.sm_list); 4164 mgmtm->stats.n_active--; 4165 if (io_req->io_cbfn) { 4166 /* io_req will be freed by completion handler */ 4167 io_req->wr_status = -ETIMEDOUT; 4168 io_req->io_cbfn(mgmtm->hw, io_req); 4169 } 4170 } 4171 } 4172 4173 /* 4174 * csio_mgmt_init - Mgmt module init entry point 4175 * @mgmtsm - mgmt module 4176 * @hw - HW module 4177 * 4178 * Initialize mgmt timer, resource wait queue, active queue, 4179 * completion q. Allocate Egress and Ingress 4180 * WR queues and save off the queue index returned by the WR 4181 * module for future use. Allocate and save off mgmt reqs in the 4182 * mgmt_req_freelist for future use. Make sure their SM is initialized 4183 * to uninit state. 4184 * Returns: 0 - on success 4185 * -ENOMEM - on error. 4186 */ 4187 static int 4188 csio_mgmtm_init(struct csio_mgmtm *mgmtm, struct csio_hw *hw) 4189 { 4190 timer_setup(&mgmtm->mgmt_timer, csio_mgmt_tmo_handler, 0); 4191 4192 INIT_LIST_HEAD(&mgmtm->active_q); 4193 INIT_LIST_HEAD(&mgmtm->cbfn_q); 4194 4195 mgmtm->hw = hw; 4196 /*mgmtm->iq_idx = hw->fwevt_iq_idx;*/ 4197 4198 return 0; 4199 } 4200 4201 /* 4202 * csio_mgmtm_exit - MGMT module exit entry point 4203 * @mgmtsm - mgmt module 4204 * 4205 * This function called during MGMT module uninit. 4206 * Stop timers, free ioreqs allocated. 4207 * Returns: None 4208 * 4209 */ 4210 static void 4211 csio_mgmtm_exit(struct csio_mgmtm *mgmtm) 4212 { 4213 del_timer_sync(&mgmtm->mgmt_timer); 4214 } 4215 4216 4217 /** 4218 * csio_hw_start - Kicks off the HW State machine 4219 * @hw: Pointer to HW module. 4220 * 4221 * It is assumed that the initialization is a synchronous operation. 4222 * So when we return after posting the event, the HW SM should be in 4223 * the ready state, if there were no errors during init. 4224 */ 4225 int 4226 csio_hw_start(struct csio_hw *hw) 4227 { 4228 spin_lock_irq(&hw->lock); 4229 csio_post_event(&hw->sm, CSIO_HWE_CFG); 4230 spin_unlock_irq(&hw->lock); 4231 4232 if (csio_is_hw_ready(hw)) 4233 return 0; 4234 else if (csio_match_state(hw, csio_hws_uninit)) 4235 return -EINVAL; 4236 else 4237 return -ENODEV; 4238 } 4239 4240 int 4241 csio_hw_stop(struct csio_hw *hw) 4242 { 4243 csio_post_event(&hw->sm, CSIO_HWE_PCI_REMOVE); 4244 4245 if (csio_is_hw_removing(hw)) 4246 return 0; 4247 else 4248 return -EINVAL; 4249 } 4250 4251 /* Max reset retries */ 4252 #define CSIO_MAX_RESET_RETRIES 3 4253 4254 /** 4255 * csio_hw_reset - Reset the hardware 4256 * @hw: HW module. 4257 * 4258 * Caller should hold lock across this function. 4259 */ 4260 int 4261 csio_hw_reset(struct csio_hw *hw) 4262 { 4263 if (!csio_is_hw_master(hw)) 4264 return -EPERM; 4265 4266 if (hw->rst_retries >= CSIO_MAX_RESET_RETRIES) { 4267 csio_dbg(hw, "Max hw reset attempts reached.."); 4268 return -EINVAL; 4269 } 4270 4271 hw->rst_retries++; 4272 csio_post_event(&hw->sm, CSIO_HWE_HBA_RESET); 4273 4274 if (csio_is_hw_ready(hw)) { 4275 hw->rst_retries = 0; 4276 hw->stats.n_reset_start = jiffies_to_msecs(jiffies); 4277 return 0; 4278 } else 4279 return -EINVAL; 4280 } 4281 4282 /* 4283 * csio_hw_get_device_id - Caches the Adapter's vendor & device id. 4284 * @hw: HW module. 4285 */ 4286 static void 4287 csio_hw_get_device_id(struct csio_hw *hw) 4288 { 4289 /* Is the adapter device id cached already ?*/ 4290 if (csio_is_dev_id_cached(hw)) 4291 return; 4292 4293 /* Get the PCI vendor & device id */ 4294 pci_read_config_word(hw->pdev, PCI_VENDOR_ID, 4295 &hw->params.pci.vendor_id); 4296 pci_read_config_word(hw->pdev, PCI_DEVICE_ID, 4297 &hw->params.pci.device_id); 4298 4299 csio_dev_id_cached(hw); 4300 hw->chip_id = (hw->params.pci.device_id & CSIO_HW_CHIP_MASK); 4301 4302 } /* csio_hw_get_device_id */ 4303 4304 /* 4305 * csio_hw_set_description - Set the model, description of the hw. 4306 * @hw: HW module. 4307 * @ven_id: PCI Vendor ID 4308 * @dev_id: PCI Device ID 4309 */ 4310 static void 4311 csio_hw_set_description(struct csio_hw *hw, uint16_t ven_id, uint16_t dev_id) 4312 { 4313 uint32_t adap_type, prot_type; 4314 4315 if (ven_id == CSIO_VENDOR_ID) { 4316 prot_type = (dev_id & CSIO_ASIC_DEVID_PROTO_MASK); 4317 adap_type = (dev_id & CSIO_ASIC_DEVID_TYPE_MASK); 4318 4319 if (prot_type == CSIO_T5_FCOE_ASIC) { 4320 memcpy(hw->hw_ver, 4321 csio_t5_fcoe_adapters[adap_type].model_no, 16); 4322 memcpy(hw->model_desc, 4323 csio_t5_fcoe_adapters[adap_type].description, 4324 32); 4325 } else { 4326 char tempName[32] = "Chelsio FCoE Controller"; 4327 memcpy(hw->model_desc, tempName, 32); 4328 } 4329 } 4330 } /* csio_hw_set_description */ 4331 4332 /** 4333 * csio_hw_init - Initialize HW module. 4334 * @hw: Pointer to HW module. 4335 * 4336 * Initialize the members of the HW module. 4337 */ 4338 int 4339 csio_hw_init(struct csio_hw *hw) 4340 { 4341 int rv = -EINVAL; 4342 uint32_t i; 4343 uint16_t ven_id, dev_id; 4344 struct csio_evt_msg *evt_entry; 4345 4346 INIT_LIST_HEAD(&hw->sm.sm_list); 4347 csio_init_state(&hw->sm, csio_hws_uninit); 4348 spin_lock_init(&hw->lock); 4349 INIT_LIST_HEAD(&hw->sln_head); 4350 4351 /* Get the PCI vendor & device id */ 4352 csio_hw_get_device_id(hw); 4353 4354 strcpy(hw->name, CSIO_HW_NAME); 4355 4356 /* Initialize the HW chip ops T5 specific ops */ 4357 hw->chip_ops = &t5_ops; 4358 4359 /* Set the model & its description */ 4360 4361 ven_id = hw->params.pci.vendor_id; 4362 dev_id = hw->params.pci.device_id; 4363 4364 csio_hw_set_description(hw, ven_id, dev_id); 4365 4366 /* Initialize default log level */ 4367 hw->params.log_level = (uint32_t) csio_dbg_level; 4368 4369 csio_set_fwevt_intr_idx(hw, -1); 4370 csio_set_nondata_intr_idx(hw, -1); 4371 4372 /* Init all the modules: Mailbox, WorkRequest and Transport */ 4373 if (csio_mbm_init(csio_hw_to_mbm(hw), hw, csio_hw_mb_timer)) 4374 goto err; 4375 4376 rv = csio_wrm_init(csio_hw_to_wrm(hw), hw); 4377 if (rv) 4378 goto err_mbm_exit; 4379 4380 rv = csio_scsim_init(csio_hw_to_scsim(hw), hw); 4381 if (rv) 4382 goto err_wrm_exit; 4383 4384 rv = csio_mgmtm_init(csio_hw_to_mgmtm(hw), hw); 4385 if (rv) 4386 goto err_scsim_exit; 4387 /* Pre-allocate evtq and initialize them */ 4388 INIT_LIST_HEAD(&hw->evt_active_q); 4389 INIT_LIST_HEAD(&hw->evt_free_q); 4390 for (i = 0; i < csio_evtq_sz; i++) { 4391 4392 evt_entry = kzalloc(sizeof(struct csio_evt_msg), GFP_KERNEL); 4393 if (!evt_entry) { 4394 rv = -ENOMEM; 4395 csio_err(hw, "Failed to initialize eventq"); 4396 goto err_evtq_cleanup; 4397 } 4398 4399 list_add_tail(&evt_entry->list, &hw->evt_free_q); 4400 CSIO_INC_STATS(hw, n_evt_freeq); 4401 } 4402 4403 hw->dev_num = dev_num; 4404 dev_num++; 4405 4406 return 0; 4407 4408 err_evtq_cleanup: 4409 csio_evtq_cleanup(hw); 4410 csio_mgmtm_exit(csio_hw_to_mgmtm(hw)); 4411 err_scsim_exit: 4412 csio_scsim_exit(csio_hw_to_scsim(hw)); 4413 err_wrm_exit: 4414 csio_wrm_exit(csio_hw_to_wrm(hw), hw); 4415 err_mbm_exit: 4416 csio_mbm_exit(csio_hw_to_mbm(hw)); 4417 err: 4418 return rv; 4419 } 4420 4421 /** 4422 * csio_hw_exit - Un-initialize HW module. 4423 * @hw: Pointer to HW module. 4424 * 4425 */ 4426 void 4427 csio_hw_exit(struct csio_hw *hw) 4428 { 4429 csio_evtq_cleanup(hw); 4430 csio_mgmtm_exit(csio_hw_to_mgmtm(hw)); 4431 csio_scsim_exit(csio_hw_to_scsim(hw)); 4432 csio_wrm_exit(csio_hw_to_wrm(hw), hw); 4433 csio_mbm_exit(csio_hw_to_mbm(hw)); 4434 } 4435