xref: /openbmc/linux/drivers/scsi/bfa/bfi_reg.h (revision 95e9fd10)
1 /*
2  * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
3  * All rights reserved
4  * www.brocade.com
5  *
6  * Linux driver for Brocade Fibre Channel Host Bus Adapter.
7  *
8  * This program is free software; you can redistribute it and/or modify it
9  * under the terms of the GNU General Public License (GPL) Version 2 as
10  * published by the Free Software Foundation
11  *
12  * This program is distributed in the hope that it will be useful, but
13  * WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
15  * General Public License for more details.
16  */
17 
18 /*
19  * bfi_reg.h ASIC register defines for all Brocade adapter ASICs
20  */
21 
22 #ifndef __BFI_REG_H__
23 #define __BFI_REG_H__
24 
25 #define HOSTFN0_INT_STATUS		0x00014000	/* cb/ct	*/
26 #define HOSTFN1_INT_STATUS		0x00014100	/* cb/ct	*/
27 #define HOSTFN2_INT_STATUS		0x00014300	/* ct		*/
28 #define HOSTFN3_INT_STATUS		0x00014400	/* ct		*/
29 #define HOSTFN0_INT_MSK			0x00014004	/* cb/ct	*/
30 #define HOSTFN1_INT_MSK			0x00014104	/* cb/ct	*/
31 #define HOSTFN2_INT_MSK			0x00014304	/* ct		*/
32 #define HOSTFN3_INT_MSK			0x00014404	/* ct		*/
33 
34 #define HOST_PAGE_NUM_FN0		0x00014008	/* cb/ct	*/
35 #define HOST_PAGE_NUM_FN1		0x00014108	/* cb/ct	*/
36 #define HOST_PAGE_NUM_FN2		0x00014308	/* ct		*/
37 #define HOST_PAGE_NUM_FN3		0x00014408	/* ct		*/
38 
39 #define APP_PLL_LCLK_CTL_REG		0x00014204	/* cb/ct	*/
40 #define __P_LCLK_PLL_LOCK		0x80000000
41 #define __APP_PLL_LCLK_SRAM_USE_100MHZ	0x00100000
42 #define __APP_PLL_LCLK_RESET_TIMER_MK	0x000e0000
43 #define __APP_PLL_LCLK_RESET_TIMER_SH	17
44 #define __APP_PLL_LCLK_RESET_TIMER(_v)	((_v) << __APP_PLL_LCLK_RESET_TIMER_SH)
45 #define __APP_PLL_LCLK_LOGIC_SOFT_RESET	0x00010000
46 #define __APP_PLL_LCLK_CNTLMT0_1_MK	0x0000c000
47 #define __APP_PLL_LCLK_CNTLMT0_1_SH	14
48 #define __APP_PLL_LCLK_CNTLMT0_1(_v)	((_v) << __APP_PLL_LCLK_CNTLMT0_1_SH)
49 #define __APP_PLL_LCLK_JITLMT0_1_MK	0x00003000
50 #define __APP_PLL_LCLK_JITLMT0_1_SH	12
51 #define __APP_PLL_LCLK_JITLMT0_1(_v)	((_v) << __APP_PLL_LCLK_JITLMT0_1_SH)
52 #define __APP_PLL_LCLK_HREF		0x00000800
53 #define __APP_PLL_LCLK_HDIV		0x00000400
54 #define __APP_PLL_LCLK_P0_1_MK		0x00000300
55 #define __APP_PLL_LCLK_P0_1_SH		8
56 #define __APP_PLL_LCLK_P0_1(_v)		((_v) << __APP_PLL_LCLK_P0_1_SH)
57 #define __APP_PLL_LCLK_Z0_2_MK		0x000000e0
58 #define __APP_PLL_LCLK_Z0_2_SH		5
59 #define __APP_PLL_LCLK_Z0_2(_v)		((_v) << __APP_PLL_LCLK_Z0_2_SH)
60 #define __APP_PLL_LCLK_RSEL200500	0x00000010
61 #define __APP_PLL_LCLK_ENARST		0x00000008
62 #define __APP_PLL_LCLK_BYPASS		0x00000004
63 #define __APP_PLL_LCLK_LRESETN		0x00000002
64 #define __APP_PLL_LCLK_ENABLE		0x00000001
65 #define APP_PLL_SCLK_CTL_REG		0x00014208	/* cb/ct	*/
66 #define __P_SCLK_PLL_LOCK		0x80000000
67 #define __APP_PLL_SCLK_RESET_TIMER_MK	0x000e0000
68 #define __APP_PLL_SCLK_RESET_TIMER_SH	17
69 #define __APP_PLL_SCLK_RESET_TIMER(_v)	((_v) << __APP_PLL_SCLK_RESET_TIMER_SH)
70 #define __APP_PLL_SCLK_LOGIC_SOFT_RESET	0x00010000
71 #define __APP_PLL_SCLK_CNTLMT0_1_MK	0x0000c000
72 #define __APP_PLL_SCLK_CNTLMT0_1_SH	14
73 #define __APP_PLL_SCLK_CNTLMT0_1(_v)	((_v) << __APP_PLL_SCLK_CNTLMT0_1_SH)
74 #define __APP_PLL_SCLK_JITLMT0_1_MK	0x00003000
75 #define __APP_PLL_SCLK_JITLMT0_1_SH	12
76 #define __APP_PLL_SCLK_JITLMT0_1(_v)	((_v) << __APP_PLL_SCLK_JITLMT0_1_SH)
77 #define __APP_PLL_SCLK_HREF		0x00000800
78 #define __APP_PLL_SCLK_HDIV		0x00000400
79 #define __APP_PLL_SCLK_P0_1_MK		0x00000300
80 #define __APP_PLL_SCLK_P0_1_SH		8
81 #define __APP_PLL_SCLK_P0_1(_v)		((_v) << __APP_PLL_SCLK_P0_1_SH)
82 #define __APP_PLL_SCLK_Z0_2_MK		0x000000e0
83 #define __APP_PLL_SCLK_Z0_2_SH		5
84 #define __APP_PLL_SCLK_Z0_2(_v)		((_v) << __APP_PLL_SCLK_Z0_2_SH)
85 #define __APP_PLL_SCLK_RSEL200500	0x00000010
86 #define __APP_PLL_SCLK_ENARST		0x00000008
87 #define __APP_PLL_SCLK_BYPASS		0x00000004
88 #define __APP_PLL_SCLK_LRESETN		0x00000002
89 #define __APP_PLL_SCLK_ENABLE		0x00000001
90 #define __ENABLE_MAC_AHB_1		0x00800000	/* ct		*/
91 #define __ENABLE_MAC_AHB_0		0x00400000	/* ct		*/
92 #define __ENABLE_MAC_1			0x00200000	/* ct		*/
93 #define __ENABLE_MAC_0			0x00100000	/* ct		*/
94 
95 #define HOST_SEM0_REG			0x00014230	/* cb/ct	*/
96 #define HOST_SEM1_REG			0x00014234	/* cb/ct	*/
97 #define HOST_SEM2_REG			0x00014238	/* cb/ct	*/
98 #define HOST_SEM3_REG			0x0001423c	/* cb/ct	*/
99 #define HOST_SEM4_REG			0x00014610	/* cb/ct	*/
100 #define HOST_SEM5_REG			0x00014614	/* cb/ct	*/
101 #define HOST_SEM6_REG			0x00014618	/* cb/ct	*/
102 #define HOST_SEM7_REG			0x0001461c	/* cb/ct	*/
103 #define HOST_SEM0_INFO_REG		0x00014240	/* cb/ct	*/
104 #define HOST_SEM1_INFO_REG		0x00014244	/* cb/ct	*/
105 #define HOST_SEM2_INFO_REG		0x00014248	/* cb/ct	*/
106 #define HOST_SEM3_INFO_REG		0x0001424c	/* cb/ct	*/
107 #define HOST_SEM4_INFO_REG		0x00014620	/* cb/ct	*/
108 #define HOST_SEM5_INFO_REG		0x00014624	/* cb/ct	*/
109 #define HOST_SEM6_INFO_REG		0x00014628	/* cb/ct	*/
110 #define HOST_SEM7_INFO_REG		0x0001462c	/* cb/ct	*/
111 
112 #define HOSTFN0_LPU0_CMD_STAT		0x00019000	/* cb/ct	*/
113 #define HOSTFN0_LPU1_CMD_STAT		0x00019004	/* cb/ct	*/
114 #define HOSTFN1_LPU0_CMD_STAT		0x00019010	/* cb/ct	*/
115 #define HOSTFN1_LPU1_CMD_STAT		0x00019014	/* cb/ct	*/
116 #define HOSTFN2_LPU0_CMD_STAT		0x00019150	/* ct		*/
117 #define HOSTFN2_LPU1_CMD_STAT		0x00019154	/* ct		*/
118 #define HOSTFN3_LPU0_CMD_STAT		0x00019160	/* ct		*/
119 #define HOSTFN3_LPU1_CMD_STAT		0x00019164	/* ct		*/
120 #define LPU0_HOSTFN0_CMD_STAT		0x00019008	/* cb/ct	*/
121 #define LPU1_HOSTFN0_CMD_STAT		0x0001900c	/* cb/ct	*/
122 #define LPU0_HOSTFN1_CMD_STAT		0x00019018	/* cb/ct	*/
123 #define LPU1_HOSTFN1_CMD_STAT		0x0001901c	/* cb/ct	*/
124 #define LPU0_HOSTFN2_CMD_STAT		0x00019158	/* ct		*/
125 #define LPU1_HOSTFN2_CMD_STAT		0x0001915c	/* ct		*/
126 #define LPU0_HOSTFN3_CMD_STAT		0x00019168	/* ct		*/
127 #define LPU1_HOSTFN3_CMD_STAT		0x0001916c	/* ct		*/
128 
129 #define PSS_CTL_REG			0x00018800	/* cb/ct	*/
130 #define __PSS_I2C_CLK_DIV_MK		0x007f0000
131 #define __PSS_I2C_CLK_DIV_SH		16
132 #define __PSS_I2C_CLK_DIV(_v)		((_v) << __PSS_I2C_CLK_DIV_SH)
133 #define __PSS_LMEM_INIT_DONE		0x00001000
134 #define __PSS_LMEM_RESET		0x00000200
135 #define __PSS_LMEM_INIT_EN		0x00000100
136 #define __PSS_LPU1_RESET		0x00000002
137 #define __PSS_LPU0_RESET		0x00000001
138 #define PSS_ERR_STATUS_REG		0x00018810	/* cb/ct	*/
139 #define ERR_SET_REG			0x00018818	/* cb/ct	*/
140 #define PSS_GPIO_OUT_REG		0x000188c0	/* cb/ct	*/
141 #define __PSS_GPIO_OUT_REG		0x00000fff
142 #define PSS_GPIO_OE_REG			0x000188c8	/* cb/ct	*/
143 #define __PSS_GPIO_OE_REG		0x000000ff
144 
145 #define HOSTFN0_LPU_MBOX0_0		0x00019200	/* cb/ct	*/
146 #define HOSTFN1_LPU_MBOX0_8		0x00019260	/* cb/ct	*/
147 #define LPU_HOSTFN0_MBOX0_0		0x00019280	/* cb/ct	*/
148 #define LPU_HOSTFN1_MBOX0_8		0x000192e0	/* cb/ct	*/
149 #define HOSTFN2_LPU_MBOX0_0		0x00019400	/* ct		*/
150 #define HOSTFN3_LPU_MBOX0_8		0x00019460	/* ct		*/
151 #define LPU_HOSTFN2_MBOX0_0		0x00019480	/* ct		*/
152 #define LPU_HOSTFN3_MBOX0_8		0x000194e0	/* ct		*/
153 
154 #define HOST_MSIX_ERR_INDEX_FN0		0x0001400c	/* ct		*/
155 #define HOST_MSIX_ERR_INDEX_FN1		0x0001410c	/* ct		*/
156 #define HOST_MSIX_ERR_INDEX_FN2		0x0001430c	/* ct		*/
157 #define HOST_MSIX_ERR_INDEX_FN3		0x0001440c	/* ct		*/
158 
159 #define MBIST_CTL_REG			0x00014220	/* ct		*/
160 #define __EDRAM_BISTR_START		0x00000004
161 #define MBIST_STAT_REG			0x00014224	/* ct		*/
162 #define ETH_MAC_SER_REG			0x00014288	/* ct		*/
163 #define __APP_EMS_CKBUFAMPIN		0x00000020
164 #define __APP_EMS_REFCLKSEL		0x00000010
165 #define __APP_EMS_CMLCKSEL		0x00000008
166 #define __APP_EMS_REFCKBUFEN2		0x00000004
167 #define __APP_EMS_REFCKBUFEN1		0x00000002
168 #define __APP_EMS_CHANNEL_SEL		0x00000001
169 #define FNC_PERS_REG			0x00014604	/* ct		*/
170 #define __F3_FUNCTION_ACTIVE		0x80000000
171 #define __F3_FUNCTION_MODE		0x40000000
172 #define __F3_PORT_MAP_MK		0x30000000
173 #define __F3_PORT_MAP_SH		28
174 #define __F3_PORT_MAP(_v)		((_v) << __F3_PORT_MAP_SH)
175 #define __F3_VM_MODE			0x08000000
176 #define __F3_INTX_STATUS_MK		0x07000000
177 #define __F3_INTX_STATUS_SH		24
178 #define __F3_INTX_STATUS(_v)		((_v) << __F3_INTX_STATUS_SH)
179 #define __F2_FUNCTION_ACTIVE		0x00800000
180 #define __F2_FUNCTION_MODE		0x00400000
181 #define __F2_PORT_MAP_MK		0x00300000
182 #define __F2_PORT_MAP_SH		20
183 #define __F2_PORT_MAP(_v)		((_v) << __F2_PORT_MAP_SH)
184 #define __F2_VM_MODE			0x00080000
185 #define __F2_INTX_STATUS_MK		0x00070000
186 #define __F2_INTX_STATUS_SH		16
187 #define __F2_INTX_STATUS(_v)		((_v) << __F2_INTX_STATUS_SH)
188 #define __F1_FUNCTION_ACTIVE		0x00008000
189 #define __F1_FUNCTION_MODE		0x00004000
190 #define __F1_PORT_MAP_MK		0x00003000
191 #define __F1_PORT_MAP_SH		12
192 #define __F1_PORT_MAP(_v)		((_v) << __F1_PORT_MAP_SH)
193 #define __F1_VM_MODE			0x00000800
194 #define __F1_INTX_STATUS_MK		0x00000700
195 #define __F1_INTX_STATUS_SH		8
196 #define __F1_INTX_STATUS(_v)		((_v) << __F1_INTX_STATUS_SH)
197 #define __F0_FUNCTION_ACTIVE		0x00000080
198 #define __F0_FUNCTION_MODE		0x00000040
199 #define __F0_PORT_MAP_MK		0x00000030
200 #define __F0_PORT_MAP_SH		4
201 #define __F0_PORT_MAP(_v)		((_v) << __F0_PORT_MAP_SH)
202 #define __F0_VM_MODE			0x00000008
203 #define __F0_INTX_STATUS		0x00000007
204 enum {
205 	__F0_INTX_STATUS_MSIX = 0x0,
206 	__F0_INTX_STATUS_INTA = 0x1,
207 	__F0_INTX_STATUS_INTB = 0x2,
208 	__F0_INTX_STATUS_INTC = 0x3,
209 	__F0_INTX_STATUS_INTD = 0x4,
210 };
211 
212 #define OP_MODE				0x0001460c	/* ct		*/
213 #define __APP_ETH_CLK_LOWSPEED		0x00000004
214 #define __GLOBAL_CORECLK_HALFSPEED	0x00000002
215 #define __GLOBAL_FCOE_MODE		0x00000001
216 #define FW_INIT_HALT_P0			0x000191ac	/* ct		*/
217 #define __FW_INIT_HALT_P		0x00000001
218 #define FW_INIT_HALT_P1			0x000191bc	/* ct		*/
219 #define PMM_1T_RESET_REG_P0		0x0002381c	/* ct		*/
220 #define __PMM_1T_RESET_P		0x00000001
221 #define PMM_1T_RESET_REG_P1		0x00023c1c	/* ct		*/
222 
223 /**
224  * Catapult-2 specific defines
225  */
226 #define CT2_PCI_CPQ_BASE		0x00030000
227 #define CT2_PCI_APP_BASE		0x00030100
228 #define CT2_PCI_ETH_BASE		0x00030400
229 
230 /*
231  * APP block registers
232  */
233 #define CT2_HOSTFN_INT_STATUS		(CT2_PCI_APP_BASE + 0x00)
234 #define CT2_HOSTFN_INTR_MASK		(CT2_PCI_APP_BASE + 0x04)
235 #define CT2_HOSTFN_PERSONALITY0		(CT2_PCI_APP_BASE + 0x08)
236 #define __PME_STATUS_			0x00200000
237 #define __PF_VF_BAR_SIZE_MODE__MK	0x00180000
238 #define __PF_VF_BAR_SIZE_MODE__SH	19
239 #define __PF_VF_BAR_SIZE_MODE_(_v)	((_v) << __PF_VF_BAR_SIZE_MODE__SH)
240 #define __FC_LL_PORT_MAP__MK		0x00060000
241 #define __FC_LL_PORT_MAP__SH		17
242 #define __FC_LL_PORT_MAP_(_v)		((_v) << __FC_LL_PORT_MAP__SH)
243 #define __PF_VF_ACTIVE_			0x00010000
244 #define __PF_VF_CFG_RDY_		0x00008000
245 #define __PF_VF_ENABLE_			0x00004000
246 #define __PF_DRIVER_ACTIVE_		0x00002000
247 #define __PF_PME_SEND_ENABLE_		0x00001000
248 #define __PF_EXROM_OFFSET__MK		0x00000ff0
249 #define __PF_EXROM_OFFSET__SH		4
250 #define __PF_EXROM_OFFSET_(_v)		((_v) << __PF_EXROM_OFFSET__SH)
251 #define __FC_LL_MODE_			0x00000008
252 #define __PF_INTX_PIN_			0x00000007
253 #define CT2_HOSTFN_PERSONALITY1		(CT2_PCI_APP_BASE + 0x0C)
254 #define __PF_NUM_QUEUES1__MK		0xff000000
255 #define __PF_NUM_QUEUES1__SH		24
256 #define __PF_NUM_QUEUES1_(_v)		((_v) << __PF_NUM_QUEUES1__SH)
257 #define __PF_VF_QUE_OFFSET1__MK		0x00ff0000
258 #define __PF_VF_QUE_OFFSET1__SH		16
259 #define __PF_VF_QUE_OFFSET1_(_v)	((_v) << __PF_VF_QUE_OFFSET1__SH)
260 #define __PF_VF_NUM_QUEUES__MK		0x0000ff00
261 #define __PF_VF_NUM_QUEUES__SH		8
262 #define __PF_VF_NUM_QUEUES_(_v)		((_v) << __PF_VF_NUM_QUEUES__SH)
263 #define __PF_VF_QUE_OFFSET_		0x000000ff
264 #define CT2_HOSTFN_PAGE_NUM		(CT2_PCI_APP_BASE + 0x18)
265 #define CT2_HOSTFN_MSIX_VT_INDEX_MBOX_ERR	(CT2_PCI_APP_BASE + 0x38)
266 
267 /*
268  * Catapult-2 CPQ block registers
269  */
270 #define CT2_HOSTFN_LPU0_MBOX0		(CT2_PCI_CPQ_BASE + 0x00)
271 #define CT2_HOSTFN_LPU1_MBOX0		(CT2_PCI_CPQ_BASE + 0x20)
272 #define CT2_LPU0_HOSTFN_MBOX0		(CT2_PCI_CPQ_BASE + 0x40)
273 #define CT2_LPU1_HOSTFN_MBOX0		(CT2_PCI_CPQ_BASE + 0x60)
274 #define CT2_HOSTFN_LPU0_CMD_STAT	(CT2_PCI_CPQ_BASE + 0x80)
275 #define CT2_HOSTFN_LPU1_CMD_STAT	(CT2_PCI_CPQ_BASE + 0x84)
276 #define CT2_LPU0_HOSTFN_CMD_STAT	(CT2_PCI_CPQ_BASE + 0x88)
277 #define CT2_LPU1_HOSTFN_CMD_STAT	(CT2_PCI_CPQ_BASE + 0x8c)
278 #define CT2_HOSTFN_LPU0_READ_STAT	(CT2_PCI_CPQ_BASE + 0x90)
279 #define CT2_HOSTFN_LPU1_READ_STAT	(CT2_PCI_CPQ_BASE + 0x94)
280 #define CT2_LPU0_HOSTFN_MBOX0_MSK	(CT2_PCI_CPQ_BASE + 0x98)
281 #define CT2_LPU1_HOSTFN_MBOX0_MSK	(CT2_PCI_CPQ_BASE + 0x9C)
282 #define CT2_HOST_SEM0_REG		0x000148f0
283 #define CT2_HOST_SEM1_REG		0x000148f4
284 #define CT2_HOST_SEM2_REG		0x000148f8
285 #define CT2_HOST_SEM3_REG		0x000148fc
286 #define CT2_HOST_SEM4_REG		0x00014900
287 #define CT2_HOST_SEM5_REG		0x00014904
288 #define CT2_HOST_SEM6_REG		0x00014908
289 #define CT2_HOST_SEM7_REG		0x0001490c
290 #define CT2_HOST_SEM0_INFO_REG		0x000148b0
291 #define CT2_HOST_SEM1_INFO_REG		0x000148b4
292 #define CT2_HOST_SEM2_INFO_REG		0x000148b8
293 #define CT2_HOST_SEM3_INFO_REG		0x000148bc
294 #define CT2_HOST_SEM4_INFO_REG		0x000148c0
295 #define CT2_HOST_SEM5_INFO_REG		0x000148c4
296 #define CT2_HOST_SEM6_INFO_REG		0x000148c8
297 #define CT2_HOST_SEM7_INFO_REG		0x000148cc
298 
299 #define CT2_APP_PLL_LCLK_CTL_REG	0x00014808
300 #define __APP_LPUCLK_HALFSPEED		0x40000000
301 #define __APP_PLL_LCLK_LOAD		0x20000000
302 #define __APP_PLL_LCLK_FBCNT_MK		0x1fe00000
303 #define __APP_PLL_LCLK_FBCNT_SH		21
304 #define __APP_PLL_LCLK_FBCNT(_v)	((_v) << __APP_PLL_SCLK_FBCNT_SH)
305 enum {
306 	__APP_PLL_LCLK_FBCNT_425_MHZ = 6,
307 	__APP_PLL_LCLK_FBCNT_468_MHZ = 4,
308 };
309 #define __APP_PLL_LCLK_EXTFB		0x00000800
310 #define __APP_PLL_LCLK_ENOUTS		0x00000400
311 #define __APP_PLL_LCLK_RATE		0x00000010
312 #define CT2_APP_PLL_SCLK_CTL_REG	0x0001480c
313 #define __P_SCLK_PLL_LOCK		0x80000000
314 #define __APP_PLL_SCLK_REFCLK_SEL	0x40000000
315 #define __APP_PLL_SCLK_CLK_DIV2		0x20000000
316 #define __APP_PLL_SCLK_LOAD		0x10000000
317 #define __APP_PLL_SCLK_FBCNT_MK		0x0ff00000
318 #define __APP_PLL_SCLK_FBCNT_SH		20
319 #define __APP_PLL_SCLK_FBCNT(_v)	((_v) << __APP_PLL_SCLK_FBCNT_SH)
320 enum {
321 	__APP_PLL_SCLK_FBCNT_NORM = 6,
322 	__APP_PLL_SCLK_FBCNT_10G_FC = 10,
323 };
324 #define __APP_PLL_SCLK_EXTFB		0x00000800
325 #define __APP_PLL_SCLK_ENOUTS		0x00000400
326 #define __APP_PLL_SCLK_RATE		0x00000010
327 #define CT2_PCIE_MISC_REG		0x00014804
328 #define __ETH_CLK_ENABLE_PORT1		0x00000010
329 #define CT2_CHIP_MISC_PRG		0x000148a4
330 #define __ETH_CLK_ENABLE_PORT0		0x00004000
331 #define __APP_LPU_SPEED			0x00000002
332 #define CT2_MBIST_STAT_REG		0x00014818
333 #define CT2_MBIST_CTL_REG		0x0001481c
334 #define CT2_PMM_1T_CONTROL_REG_P0	0x0002381c
335 #define __PMM_1T_PNDB_P			0x00000002
336 #define CT2_PMM_1T_CONTROL_REG_P1	0x00023c1c
337 #define CT2_WGN_STATUS			0x00014990
338 #define __A2T_AHB_LOAD			0x00000800
339 #define __WGN_READY			0x00000400
340 #define __GLBL_PF_VF_CFG_RDY		0x00000200
341 #define CT2_NFC_CSR_CLR_REG		0x00027420
342 #define CT2_NFC_CSR_SET_REG		0x00027424
343 #define __HALT_NFC_CONTROLLER		0x00000002
344 #define __NFC_CONTROLLER_HALTED		0x00001000
345 #define CT2_RSC_GPR15_REG		0x0002765c
346 #define CT2_CSI_FW_CTL_REG		0x00027080
347 #define CT2_CSI_FW_CTL_SET_REG		0x00027088
348 #define __RESET_AND_START_SCLK_LCLK_PLLS 0x00010000
349 
350 #define CT2_CSI_MAC0_CONTROL_REG	0x000270d0
351 #define __CSI_MAC_RESET			0x00000010
352 #define __CSI_MAC_AHB_RESET		0x00000008
353 #define CT2_CSI_MAC1_CONTROL_REG	0x000270d4
354 #define CT2_CSI_MAC_CONTROL_REG(__n)	\
355 	(CT2_CSI_MAC0_CONTROL_REG +	\
356 	(__n) * (CT2_CSI_MAC1_CONTROL_REG - CT2_CSI_MAC0_CONTROL_REG))
357 
358 /*
359  * Name semaphore registers based on usage
360  */
361 #define BFA_IOC0_HBEAT_REG		HOST_SEM0_INFO_REG
362 #define BFA_IOC0_STATE_REG		HOST_SEM1_INFO_REG
363 #define BFA_IOC1_HBEAT_REG		HOST_SEM2_INFO_REG
364 #define BFA_IOC1_STATE_REG		HOST_SEM3_INFO_REG
365 #define BFA_FW_USE_COUNT		HOST_SEM4_INFO_REG
366 #define BFA_IOC_FAIL_SYNC		HOST_SEM5_INFO_REG
367 
368 /*
369  * CT2 semaphore register locations changed
370  */
371 #define CT2_BFA_IOC0_HBEAT_REG		CT2_HOST_SEM0_INFO_REG
372 #define CT2_BFA_IOC0_STATE_REG		CT2_HOST_SEM1_INFO_REG
373 #define CT2_BFA_IOC1_HBEAT_REG		CT2_HOST_SEM2_INFO_REG
374 #define CT2_BFA_IOC1_STATE_REG		CT2_HOST_SEM3_INFO_REG
375 #define CT2_BFA_FW_USE_COUNT		CT2_HOST_SEM4_INFO_REG
376 #define CT2_BFA_IOC_FAIL_SYNC		CT2_HOST_SEM5_INFO_REG
377 
378 #define CPE_Q_NUM(__fn, __q)	(((__fn) << 2) + (__q))
379 #define RME_Q_NUM(__fn, __q)	(((__fn) << 2) + (__q))
380 
381 /*
382  * And corresponding host interrupt status bit field defines
383  */
384 #define __HFN_INT_CPE_Q0	0x00000001U
385 #define __HFN_INT_CPE_Q1	0x00000002U
386 #define __HFN_INT_CPE_Q2	0x00000004U
387 #define __HFN_INT_CPE_Q3	0x00000008U
388 #define __HFN_INT_CPE_Q4	0x00000010U
389 #define __HFN_INT_CPE_Q5	0x00000020U
390 #define __HFN_INT_CPE_Q6	0x00000040U
391 #define __HFN_INT_CPE_Q7	0x00000080U
392 #define __HFN_INT_RME_Q0	0x00000100U
393 #define __HFN_INT_RME_Q1	0x00000200U
394 #define __HFN_INT_RME_Q2	0x00000400U
395 #define __HFN_INT_RME_Q3	0x00000800U
396 #define __HFN_INT_RME_Q4	0x00001000U
397 #define __HFN_INT_RME_Q5	0x00002000U
398 #define __HFN_INT_RME_Q6	0x00004000U
399 #define __HFN_INT_RME_Q7	0x00008000U
400 #define __HFN_INT_ERR_EMC	0x00010000U
401 #define __HFN_INT_ERR_LPU0	0x00020000U
402 #define __HFN_INT_ERR_LPU1	0x00040000U
403 #define __HFN_INT_ERR_PSS	0x00080000U
404 #define __HFN_INT_MBOX_LPU0	0x00100000U
405 #define __HFN_INT_MBOX_LPU1	0x00200000U
406 #define __HFN_INT_MBOX1_LPU0	0x00400000U
407 #define __HFN_INT_MBOX1_LPU1	0x00800000U
408 #define __HFN_INT_LL_HALT	0x01000000U
409 #define __HFN_INT_CPE_MASK	0x000000ffU
410 #define __HFN_INT_RME_MASK	0x0000ff00U
411 #define __HFN_INT_ERR_MASK	\
412 	(__HFN_INT_ERR_EMC | __HFN_INT_ERR_LPU0 | __HFN_INT_ERR_LPU1 | \
413 	 __HFN_INT_ERR_PSS | __HFN_INT_LL_HALT)
414 #define __HFN_INT_FN0_MASK	\
415 	(__HFN_INT_CPE_Q0 | __HFN_INT_CPE_Q1 | __HFN_INT_CPE_Q2 | \
416 	 __HFN_INT_CPE_Q3 | __HFN_INT_RME_Q0 | __HFN_INT_RME_Q1 | \
417 	 __HFN_INT_RME_Q2 | __HFN_INT_RME_Q3 | __HFN_INT_MBOX_LPU0)
418 #define __HFN_INT_FN1_MASK	\
419 	(__HFN_INT_CPE_Q4 | __HFN_INT_CPE_Q5 | __HFN_INT_CPE_Q6 | \
420 	 __HFN_INT_CPE_Q7 | __HFN_INT_RME_Q4 | __HFN_INT_RME_Q5 | \
421 	 __HFN_INT_RME_Q6 | __HFN_INT_RME_Q7 | __HFN_INT_MBOX_LPU1)
422 
423 /*
424  * Host interrupt status defines for catapult-2
425  */
426 #define __HFN_INT_MBOX_LPU0_CT2	0x00010000U
427 #define __HFN_INT_MBOX_LPU1_CT2	0x00020000U
428 #define __HFN_INT_ERR_PSS_CT2	0x00040000U
429 #define __HFN_INT_ERR_LPU0_CT2	0x00080000U
430 #define __HFN_INT_ERR_LPU1_CT2	0x00100000U
431 #define __HFN_INT_CPQ_HALT_CT2	0x00200000U
432 #define __HFN_INT_ERR_WGN_CT2	0x00400000U
433 #define __HFN_INT_ERR_LEHRX_CT2	0x00800000U
434 #define __HFN_INT_ERR_LEHTX_CT2	0x01000000U
435 #define __HFN_INT_ERR_MASK_CT2	\
436 	(__HFN_INT_ERR_PSS_CT2 | __HFN_INT_ERR_LPU0_CT2 | \
437 	 __HFN_INT_ERR_LPU1_CT2 | __HFN_INT_CPQ_HALT_CT2 | \
438 	 __HFN_INT_ERR_WGN_CT2 | __HFN_INT_ERR_LEHRX_CT2 | \
439 	 __HFN_INT_ERR_LEHTX_CT2)
440 #define __HFN_INT_FN0_MASK_CT2	\
441 	(__HFN_INT_CPE_Q0 | __HFN_INT_CPE_Q1 | __HFN_INT_CPE_Q2 | \
442 	 __HFN_INT_CPE_Q3 | __HFN_INT_RME_Q0 | __HFN_INT_RME_Q1 | \
443 	 __HFN_INT_RME_Q2 | __HFN_INT_RME_Q3 | __HFN_INT_MBOX_LPU0_CT2)
444 #define __HFN_INT_FN1_MASK_CT2	\
445 	(__HFN_INT_CPE_Q4 | __HFN_INT_CPE_Q5 | __HFN_INT_CPE_Q6 | \
446 	 __HFN_INT_CPE_Q7 | __HFN_INT_RME_Q4 | __HFN_INT_RME_Q5 | \
447 	 __HFN_INT_RME_Q6 | __HFN_INT_RME_Q7 | __HFN_INT_MBOX_LPU1_CT2)
448 
449 /*
450  * asic memory map.
451  */
452 #define PSS_SMEM_PAGE_START		0x8000
453 #define PSS_SMEM_PGNUM(_pg0, _ma)	((_pg0) + ((_ma) >> 15))
454 #define PSS_SMEM_PGOFF(_ma)		((_ma) & 0x7fff)
455 
456 #endif /* __BFI_REG_H__ */
457