1 /* 2 * linux/drivers/acorn/scsi/fas216.h 3 * 4 * Copyright (C) 1997-2000 Russell King 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License version 2 as 8 * published by the Free Software Foundation. 9 * 10 * FAS216 generic driver 11 */ 12 #ifndef FAS216_H 13 #define FAS216_H 14 15 #ifndef NO_IRQ 16 #define NO_IRQ 255 17 #endif 18 19 #include <scsi/scsi_eh.h> 20 21 #include "queue.h" 22 #include "msgqueue.h" 23 24 /* FAS register definitions */ 25 26 /* transfer count low */ 27 #define REG_CTCL (0) 28 #define REG_STCL (0) 29 30 /* transfer count medium */ 31 #define REG_CTCM (1) 32 #define REG_STCM (1) 33 34 /* fifo data */ 35 #define REG_FF (2) 36 37 /* command */ 38 #define REG_CMD (3) 39 #define CMD_NOP 0x00 40 #define CMD_FLUSHFIFO 0x01 41 #define CMD_RESETCHIP 0x02 42 #define CMD_RESETSCSI 0x03 43 44 #define CMD_TRANSFERINFO 0x10 45 #define CMD_INITCMDCOMPLETE 0x11 46 #define CMD_MSGACCEPTED 0x12 47 #define CMD_PADBYTES 0x18 48 #define CMD_SETATN 0x1a 49 #define CMD_RSETATN 0x1b 50 51 #define CMD_SELECTWOATN 0x41 52 #define CMD_SELECTATN 0x42 53 #define CMD_SELECTATNSTOP 0x43 54 #define CMD_ENABLESEL 0x44 55 #define CMD_DISABLESEL 0x45 56 #define CMD_SELECTATN3 0x46 57 #define CMD_RESEL3 0x47 58 59 #define CMD_WITHDMA 0x80 60 61 /* status register (read) */ 62 #define REG_STAT (4) 63 #define STAT_IO (1 << 0) /* IO phase */ 64 #define STAT_CD (1 << 1) /* CD phase */ 65 #define STAT_MSG (1 << 2) /* MSG phase */ 66 #define STAT_TRANSFERDONE (1 << 3) /* Transfer completed */ 67 #define STAT_TRANSFERCNTZ (1 << 4) /* Transfer counter is zero */ 68 #define STAT_PARITYERROR (1 << 5) /* Parity error */ 69 #define STAT_REALBAD (1 << 6) /* Something bad */ 70 #define STAT_INT (1 << 7) /* Interrupt */ 71 72 #define STAT_BUSMASK (STAT_MSG|STAT_CD|STAT_IO) 73 #define STAT_DATAOUT (0) /* Data out */ 74 #define STAT_DATAIN (STAT_IO) /* Data in */ 75 #define STAT_COMMAND (STAT_CD) /* Command out */ 76 #define STAT_STATUS (STAT_CD|STAT_IO) /* Status In */ 77 #define STAT_MESGOUT (STAT_MSG|STAT_CD) /* Message out */ 78 #define STAT_MESGIN (STAT_MSG|STAT_CD|STAT_IO) /* Message In */ 79 80 /* bus ID for select / reselect */ 81 #define REG_SDID (4) 82 #define BUSID(target) ((target) & 7) 83 84 /* Interrupt status register (read) */ 85 #define REG_INST (5) 86 #define INST_SELWOATN (1 << 0) /* Select w/o ATN */ 87 #define INST_SELATN (1 << 1) /* Select w/ATN */ 88 #define INST_RESELECTED (1 << 2) /* Reselected */ 89 #define INST_FUNCDONE (1 << 3) /* Function done */ 90 #define INST_BUSSERVICE (1 << 4) /* Bus service */ 91 #define INST_DISCONNECT (1 << 5) /* Disconnect */ 92 #define INST_ILLEGALCMD (1 << 6) /* Illegal command */ 93 #define INST_BUSRESET (1 << 7) /* SCSI Bus reset */ 94 95 /* Timeout register (write) */ 96 #define REG_STIM (5) 97 98 /* Sequence step register (read) */ 99 #define REG_IS (6) 100 #define IS_BITS 0x07 101 #define IS_SELARB 0x00 /* Select & Arb ok */ 102 #define IS_MSGBYTESENT 0x01 /* One byte message sent*/ 103 #define IS_NOTCOMMAND 0x02 /* Not in command state */ 104 #define IS_EARLYPHASE 0x03 /* Early phase change */ 105 #define IS_COMPLETE 0x04 /* Command ok */ 106 #define IS_SOF 0x08 /* Sync off flag */ 107 108 /* Transfer period step (write) */ 109 #define REG_STP (6) 110 111 /* Synchronous Offset (write) */ 112 #define REG_SOF (7) 113 114 /* Fifo state register (read) */ 115 #define REG_CFIS (7) 116 #define CFIS_CF 0x1f /* Num bytes in FIFO */ 117 #define CFIS_IS 0xe0 /* Step */ 118 119 /* config register 1 */ 120 #define REG_CNTL1 (8) 121 #define CNTL1_CID (7 << 0) /* Chip ID */ 122 #define CNTL1_STE (1 << 3) /* Self test enable */ 123 #define CNTL1_PERE (1 << 4) /* Parity enable reporting en. */ 124 #define CNTL1_PTE (1 << 5) /* Parity test enable */ 125 #define CNTL1_DISR (1 << 6) /* Disable Irq on SCSI reset */ 126 #define CNTL1_ETM (1 << 7) /* Extended Timing Mode */ 127 128 /* Clock conversion factor (read) */ 129 #define REG_CLKF (9) 130 #define CLKF_F37MHZ 0x00 /* 35.01 - 40 MHz */ 131 #define CLKF_F10MHZ 0x02 /* 10 MHz */ 132 #define CLKF_F12MHZ 0x03 /* 10.01 - 15 MHz */ 133 #define CLKF_F17MHZ 0x04 /* 15.01 - 20 MHz */ 134 #define CLKF_F22MHZ 0x05 /* 20.01 - 25 MHz */ 135 #define CLKF_F27MHZ 0x06 /* 25.01 - 30 MHz */ 136 #define CLKF_F32MHZ 0x07 /* 30.01 - 35 MHz */ 137 138 /* Chip test register (write) */ 139 #define REG_FTM (10) 140 #define TEST_FTM 0x01 /* Force target mode */ 141 #define TEST_FIM 0x02 /* Force initiator mode */ 142 #define TEST_FHI 0x04 /* Force high impedance mode */ 143 144 /* Configuration register 2 (read/write) */ 145 #define REG_CNTL2 (11) 146 #define CNTL2_PGDP (1 << 0) /* Pass Th/Generate Data Parity */ 147 #define CNTL2_PGRP (1 << 1) /* Pass Th/Generate Reg Parity */ 148 #define CNTL2_ACDPE (1 << 2) /* Abort on Cmd/Data Parity Err */ 149 #define CNTL2_S2FE (1 << 3) /* SCSI2 Features Enable */ 150 #define CNTL2_TSDR (1 << 4) /* Tristate DREQ */ 151 #define CNTL2_SBO (1 << 5) /* Select Byte Order */ 152 #define CNTL2_ENF (1 << 6) /* Enable features */ 153 #define CNTL2_DAE (1 << 7) /* Data Alignment Enable */ 154 155 /* Configuration register 3 (read/write) */ 156 #define REG_CNTL3 (12) 157 #define CNTL3_BS8 (1 << 0) /* Burst size 8 */ 158 #define CNTL3_MDM (1 << 1) /* Modify DMA mode */ 159 #define CNTL3_LBTM (1 << 2) /* Last Byte Transfer mode */ 160 #define CNTL3_FASTCLK (1 << 3) /* Fast SCSI clocking */ 161 #define CNTL3_FASTSCSI (1 << 4) /* Fast SCSI */ 162 #define CNTL3_G2CB (1 << 5) /* Group2 SCSI support */ 163 #define CNTL3_QTAG (1 << 6) /* Enable 3 byte msgs */ 164 #define CNTL3_ADIDCHK (1 << 7) /* Additional ID check */ 165 166 /* High transfer count (read/write) */ 167 #define REG_CTCH (14) 168 #define REG_STCH (14) 169 170 /* ID register (read only) */ 171 #define REG_ID (14) 172 173 /* Data alignment */ 174 #define REG_DAL (15) 175 176 typedef enum { 177 PHASE_IDLE, /* we're not planning on doing anything */ 178 PHASE_SELECTION, /* selecting a device */ 179 PHASE_SELSTEPS, /* selection with command steps */ 180 PHASE_COMMAND, /* command sent */ 181 PHASE_MESSAGESENT, /* selected, and we're sending cmd */ 182 PHASE_DATAOUT, /* data out to device */ 183 PHASE_DATAIN, /* data in from device */ 184 PHASE_MSGIN, /* message in from device */ 185 PHASE_MSGIN_DISCONNECT, /* disconnecting from bus */ 186 PHASE_MSGOUT, /* after message out phase */ 187 PHASE_MSGOUT_EXPECT, /* expecting message out */ 188 PHASE_STATUS, /* status from device */ 189 PHASE_DONE /* Command complete */ 190 } phase_t; 191 192 typedef enum { 193 DMA_OUT, /* DMA from memory to chip */ 194 DMA_IN /* DMA from chip to memory */ 195 } fasdmadir_t; 196 197 typedef enum { 198 fasdma_none, /* No dma */ 199 fasdma_pio, /* PIO mode */ 200 fasdma_pseudo, /* Pseudo DMA */ 201 fasdma_real_block, /* Real DMA, on block by block basis */ 202 fasdma_real_all /* Real DMA, on request by request */ 203 } fasdmatype_t; 204 205 typedef enum { 206 neg_wait, /* Negociate with device */ 207 neg_inprogress, /* Negociation sent */ 208 neg_complete, /* Negociation complete */ 209 neg_targcomplete, /* Target completed negociation */ 210 neg_invalid /* Negociation not supported */ 211 } neg_t; 212 213 #define MAGIC 0x441296bdUL 214 #define NR_MSGS 8 215 216 #define FASCAP_DMA (1 << 0) 217 #define FASCAP_PSEUDODMA (1 << 1) 218 219 typedef struct { 220 unsigned long magic_start; 221 spinlock_t host_lock; 222 struct Scsi_Host *host; /* host */ 223 struct scsi_cmnd *SCpnt; /* currently processing command */ 224 struct scsi_cmnd *origSCpnt; /* original connecting command */ 225 struct scsi_cmnd *reqSCpnt; /* request sense command */ 226 struct scsi_cmnd *rstSCpnt; /* reset command */ 227 struct scsi_cmnd *pending_SCpnt[8]; /* per-device pending commands */ 228 int next_pending; /* next pending device */ 229 230 /* 231 * Error recovery 232 */ 233 wait_queue_head_t eh_wait; 234 struct timer_list eh_timer; 235 unsigned int rst_dev_status; 236 unsigned int rst_bus_status; 237 238 /* driver information */ 239 struct { 240 phase_t phase; /* current phase */ 241 void __iomem *io_base; /* iomem base of FAS216 */ 242 unsigned int io_shift; /* shift to adjust reg offsets by */ 243 unsigned char cfg[4]; /* configuration registers */ 244 const char *type; /* chip type */ 245 unsigned int irq; /* interrupt */ 246 int dma; /* dma channel */ 247 248 struct scsi_pointer SCp; /* current commands data pointer */ 249 250 MsgQueue_t msgs; /* message queue for connected device */ 251 252 unsigned int async_stp; /* Async transfer STP value */ 253 unsigned char msgin_fifo; /* bytes in fifo at time of message in */ 254 unsigned char message[256]; /* last message received from device */ 255 256 unsigned char disconnectable:1; /* this command can be disconnected */ 257 unsigned char aborting:1; /* aborting command */ 258 } scsi; 259 260 /* statistics information */ 261 struct { 262 unsigned int queues; 263 unsigned int removes; 264 unsigned int fins; 265 unsigned int reads; 266 unsigned int writes; 267 unsigned int miscs; 268 unsigned int disconnects; 269 unsigned int aborts; 270 unsigned int bus_resets; 271 unsigned int host_resets; 272 } stats; 273 274 /* configuration information */ 275 struct { 276 unsigned char clockrate; /* clock rate of FAS device (MHz) */ 277 unsigned char select_timeout; /* timeout (R5) */ 278 unsigned char sync_max_depth; /* Synchronous xfer max fifo depth */ 279 unsigned char wide_max_size; /* Maximum wide transfer size */ 280 unsigned char cntl3; /* Control Reg 3 */ 281 unsigned int asyncperiod; /* Async transfer period (ns) */ 282 unsigned int capabilities; /* driver capabilities */ 283 unsigned int disconnect_ok:1; /* Disconnects allowed? */ 284 } ifcfg; 285 286 /* queue handling */ 287 struct { 288 Queue_t issue; /* issue queue */ 289 Queue_t disconnected; /* disconnected command queue */ 290 } queues; 291 292 /* per-device info */ 293 struct fas216_device { 294 unsigned char disconnect_ok:1; /* device can disconnect */ 295 unsigned char parity_enabled:1; /* parity checking enabled */ 296 unsigned char parity_check:1; /* need to check parity checking */ 297 unsigned char period; /* sync xfer period in (*4ns) */ 298 unsigned char stp; /* synchronous transfer period */ 299 unsigned char sof; /* synchronous offset register */ 300 unsigned char wide_xfer; /* currently negociated wide transfer */ 301 neg_t sync_state; /* synchronous transfer mode */ 302 neg_t wide_state; /* wide transfer mode */ 303 } device[8]; 304 unsigned long busyluns[64/sizeof(unsigned long)];/* array of bits indicating LUNs busy */ 305 306 /* dma */ 307 struct { 308 fasdmatype_t transfer_type; /* current type of DMA transfer */ 309 fasdmatype_t (*setup) (struct Scsi_Host *host, struct scsi_pointer *SCp, fasdmadir_t direction, fasdmatype_t min_dma); 310 void (*pseudo)(struct Scsi_Host *host, struct scsi_pointer *SCp, fasdmadir_t direction, int transfer); 311 void (*stop) (struct Scsi_Host *host, struct scsi_pointer *SCp); 312 } dma; 313 314 /* miscellaneous */ 315 int internal_done; /* flag to indicate request done */ 316 struct scsi_eh_save ses; /* holds request sense restore info */ 317 unsigned long magic_end; 318 } FAS216_Info; 319 320 /* Function: int fas216_init (struct Scsi_Host *instance) 321 * Purpose : initialise FAS/NCR/AMD SCSI structures. 322 * Params : instance - a driver-specific filled-out structure 323 * Returns : 0 on success 324 */ 325 extern int fas216_init (struct Scsi_Host *instance); 326 327 /* Function: int fas216_add (struct Scsi_Host *instance, struct device *dev) 328 * Purpose : initialise FAS/NCR/AMD SCSI ic. 329 * Params : instance - a driver-specific filled-out structure 330 * Returns : 0 on success 331 */ 332 extern int fas216_add (struct Scsi_Host *instance, struct device *dev); 333 334 /* Function: int fas216_queue_command(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) 335 * Purpose : queue a command for adapter to process. 336 * Params : SCpnt - Command to queue 337 * done - done function to call once command is complete 338 * Returns : 0 - success, else error 339 */ 340 extern int fas216_queue_command(struct scsi_cmnd *, 341 void (*done)(struct scsi_cmnd *)); 342 343 /* Function: int fas216_noqueue_command(istruct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) 344 * Purpose : queue a command for adapter to process, and process it to completion. 345 * Params : SCpnt - Command to queue 346 * done - done function to call once command is complete 347 * Returns : 0 - success, else error 348 */ 349 extern int fas216_noqueue_command(struct scsi_cmnd *, 350 void (*done)(struct scsi_cmnd *)); 351 352 /* Function: irqreturn_t fas216_intr (FAS216_Info *info) 353 * Purpose : handle interrupts from the interface to progress a command 354 * Params : info - interface to service 355 */ 356 extern irqreturn_t fas216_intr (FAS216_Info *info); 357 358 extern void fas216_remove (struct Scsi_Host *instance); 359 360 /* Function: void fas216_release (struct Scsi_Host *instance) 361 * Purpose : release all resources and put everything to bed for FAS/NCR/AMD SCSI ic. 362 * Params : instance - a driver-specific filled-out structure 363 * Returns : 0 on success 364 */ 365 extern void fas216_release (struct Scsi_Host *instance); 366 367 extern int fas216_print_host(FAS216_Info *info, char *buffer); 368 extern int fas216_print_stats(FAS216_Info *info, char *buffer); 369 extern int fas216_print_devices(FAS216_Info *info, char *buffer); 370 371 /* Function: int fas216_eh_abort(struct scsi_cmnd *SCpnt) 372 * Purpose : abort this command 373 * Params : SCpnt - command to abort 374 * Returns : FAILED if unable to abort 375 */ 376 extern int fas216_eh_abort(struct scsi_cmnd *SCpnt); 377 378 /* Function: int fas216_eh_device_reset(struct scsi_cmnd *SCpnt) 379 * Purpose : Reset the device associated with this command 380 * Params : SCpnt - command specifing device to reset 381 * Returns : FAILED if unable to reset 382 */ 383 extern int fas216_eh_device_reset(struct scsi_cmnd *SCpnt); 384 385 /* Function: int fas216_eh_bus_reset(struct scsi_cmnd *SCpnt) 386 * Purpose : Reset the complete bus associated with this command 387 * Params : SCpnt - command specifing bus to reset 388 * Returns : FAILED if unable to reset 389 */ 390 extern int fas216_eh_bus_reset(struct scsi_cmnd *SCpnt); 391 392 /* Function: int fas216_eh_host_reset(struct scsi_cmnd *SCpnt) 393 * Purpose : Reset the host associated with this command 394 * Params : SCpnt - command specifing host to reset 395 * Returns : FAILED if unable to reset 396 */ 397 extern int fas216_eh_host_reset(struct scsi_cmnd *SCpnt); 398 399 #endif /* FAS216_H */ 400