xref: /openbmc/linux/drivers/scsi/arm/acornscsi.h (revision d7a3d85e)
1 /*
2  *  linux/drivers/acorn/scsi/acornscsi.h
3  *
4  *  Copyright (C) 1997 Russell King
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 as
8  * published by the Free Software Foundation.
9  *
10  *  Acorn SCSI driver
11  */
12 #ifndef ACORNSCSI_H
13 #define ACORNSCSI_H
14 
15 /* SBIC registers */
16 #define SBIC_OWNID		0
17 #define OWNID_FS1		(1<<7)
18 #define OWNID_FS2		(1<<6)
19 #define OWNID_EHP		(1<<4)
20 #define OWNID_EAF		(1<<3)
21 
22 #define SBIC_CTRL		1
23 #define CTRL_DMAMODE		(1<<7)
24 #define CTRL_DMADBAMODE		(1<<6)
25 #define CTRL_DMABURST		(1<<5)
26 #define CTRL_DMAPOLLED		0
27 #define CTRL_HHP		(1<<4)
28 #define CTRL_EDI		(1<<3)
29 #define CTRL_IDI		(1<<2)
30 #define CTRL_HA			(1<<1)
31 #define CTRL_HSP		(1<<0)
32 
33 #define SBIC_TIMEOUT		2
34 #define SBIC_TOTSECTS		3
35 #define SBIC_TOTHEADS		4
36 #define SBIC_TOTCYLH		5
37 #define SBIC_TOTCYLL		6
38 #define SBIC_LOGADDRH		7
39 #define SBIC_LOGADDRM2		8
40 #define SBIC_LOGADDRM1		9
41 #define SBIC_LOGADDRL		10
42 #define SBIC_SECTORNUM		11
43 #define SBIC_HEADNUM		12
44 #define SBIC_CYLH		13
45 #define SBIC_CYLL		14
46 #define SBIC_TARGETLUN		15
47 #define TARGETLUN_TLV		(1<<7)
48 #define TARGETLUN_DOK		(1<<6)
49 
50 #define SBIC_CMNDPHASE		16
51 #define SBIC_SYNCHTRANSFER	17
52 #define SYNCHTRANSFER_OF0	0x00
53 #define SYNCHTRANSFER_OF1	0x01
54 #define SYNCHTRANSFER_OF2	0x02
55 #define SYNCHTRANSFER_OF3	0x03
56 #define SYNCHTRANSFER_OF4	0x04
57 #define SYNCHTRANSFER_OF5	0x05
58 #define SYNCHTRANSFER_OF6	0x06
59 #define SYNCHTRANSFER_OF7	0x07
60 #define SYNCHTRANSFER_OF8	0x08
61 #define SYNCHTRANSFER_OF9	0x09
62 #define SYNCHTRANSFER_OF10	0x0A
63 #define SYNCHTRANSFER_OF11	0x0B
64 #define SYNCHTRANSFER_OF12	0x0C
65 #define SYNCHTRANSFER_8DBA	0x00
66 #define SYNCHTRANSFER_2DBA	0x20
67 #define SYNCHTRANSFER_3DBA	0x30
68 #define SYNCHTRANSFER_4DBA	0x40
69 #define SYNCHTRANSFER_5DBA	0x50
70 #define SYNCHTRANSFER_6DBA	0x60
71 #define SYNCHTRANSFER_7DBA	0x70
72 
73 #define SBIC_TRANSCNTH		18
74 #define SBIC_TRANSCNTM		19
75 #define SBIC_TRANSCNTL		20
76 #define SBIC_DESTID		21
77 #define DESTID_SCC		(1<<7)
78 #define DESTID_DPD		(1<<6)
79 
80 #define SBIC_SOURCEID		22
81 #define SOURCEID_ER		(1<<7)
82 #define SOURCEID_ES		(1<<6)
83 #define SOURCEID_DSP		(1<<5)
84 #define SOURCEID_SIV		(1<<4)
85 
86 #define SBIC_SSR		23
87 #define SBIC_CMND		24
88 #define CMND_RESET		0x00
89 #define CMND_ABORT		0x01
90 #define CMND_ASSERTATN		0x02
91 #define CMND_NEGATEACK		0x03
92 #define CMND_DISCONNECT		0x04
93 #define CMND_RESELECT		0x05
94 #define CMND_SELWITHATN		0x06
95 #define CMND_SELECT		0x07
96 #define CMND_SELECTATNTRANSFER	0x08
97 #define CMND_SELECTTRANSFER	0x09
98 #define CMND_RESELECTRXDATA	0x0A
99 #define CMND_RESELECTTXDATA	0x0B
100 #define CMND_WAITFORSELRECV	0x0C
101 #define CMND_SENDSTATCMD	0x0D
102 #define CMND_SENDDISCONNECT	0x0E
103 #define CMND_SETIDI		0x0F
104 #define CMND_RECEIVECMD		0x10
105 #define CMND_RECEIVEDTA		0x11
106 #define CMND_RECEIVEMSG		0x12
107 #define CMND_RECEIVEUSP		0x13
108 #define CMND_SENDCMD		0x14
109 #define CMND_SENDDATA		0x15
110 #define CMND_SENDMSG		0x16
111 #define CMND_SENDUSP		0x17
112 #define CMND_TRANSLATEADDR	0x18
113 #define CMND_XFERINFO		0x20
114 #define CMND_SBT		(1<<7)
115 
116 #define SBIC_DATA		25
117 #define SBIC_ASR		26
118 #define ASR_INT			(1<<7)
119 #define ASR_LCI			(1<<6)
120 #define ASR_BSY			(1<<5)
121 #define ASR_CIP			(1<<4)
122 #define ASR_PE			(1<<1)
123 #define ASR_DBR			(1<<0)
124 
125 /* DMAC registers */
126 #define DMAC_INIT		0x00
127 #define INIT_8BIT		(1)
128 
129 #define DMAC_CHANNEL		0x80
130 #define CHANNEL_0		0x00
131 #define CHANNEL_1		0x01
132 #define CHANNEL_2		0x02
133 #define CHANNEL_3		0x03
134 
135 #define DMAC_TXCNTLO		0x01
136 #define DMAC_TXCNTHI		0x81
137 #define DMAC_TXADRLO		0x02
138 #define DMAC_TXADRMD		0x82
139 #define DMAC_TXADRHI		0x03
140 
141 #define DMAC_DEVCON0		0x04
142 #define DEVCON0_AKL		(1<<7)
143 #define DEVCON0_RQL		(1<<6)
144 #define DEVCON0_EXW		(1<<5)
145 #define DEVCON0_ROT		(1<<4)
146 #define DEVCON0_CMP		(1<<3)
147 #define DEVCON0_DDMA		(1<<2)
148 #define DEVCON0_AHLD		(1<<1)
149 #define DEVCON0_MTM		(1<<0)
150 
151 #define DMAC_DEVCON1		0x84
152 #define DEVCON1_WEV		(1<<1)
153 #define DEVCON1_BHLD		(1<<0)
154 
155 #define DMAC_MODECON		0x05
156 #define MODECON_WOED		0x01
157 #define MODECON_VERIFY		0x00
158 #define MODECON_READ		0x04
159 #define MODECON_WRITE		0x08
160 #define MODECON_AUTOINIT	0x10
161 #define MODECON_ADDRDIR		0x20
162 #define MODECON_DEMAND		0x00
163 #define MODECON_SINGLE		0x40
164 #define MODECON_BLOCK		0x80
165 #define MODECON_CASCADE		0xC0
166 
167 #define DMAC_STATUS		0x85
168 #define STATUS_TC0		(1<<0)
169 #define STATUS_RQ0		(1<<4)
170 
171 #define DMAC_TEMPLO		0x06
172 #define DMAC_TEMPHI		0x86
173 #define DMAC_REQREG		0x07
174 #define DMAC_MASKREG		0x87
175 #define MASKREG_M0		0x01
176 #define MASKREG_M1		0x02
177 #define MASKREG_M2		0x04
178 #define MASKREG_M3		0x08
179 
180 /* miscellaneous internal variables */
181 
182 #define MASK_ON		(MASKREG_M3|MASKREG_M2|MASKREG_M1|MASKREG_M0)
183 #define MASK_OFF	(MASKREG_M3|MASKREG_M2|MASKREG_M1)
184 
185 /*
186  * SCSI driver phases
187  */
188 typedef enum {
189     PHASE_IDLE,					/* we're not planning on doing anything	 */
190     PHASE_CONNECTING,				/* connecting to a target		 */
191     PHASE_CONNECTED,				/* connected to a target		 */
192     PHASE_MSGOUT,				/* message out to device		 */
193     PHASE_RECONNECTED,				/* reconnected				 */
194     PHASE_COMMANDPAUSED,			/* command partly sent			 */
195     PHASE_COMMAND,				/* command all sent			 */
196     PHASE_DATAOUT,				/* data out to device			 */
197     PHASE_DATAIN,				/* data in from device			 */
198     PHASE_STATUSIN,				/* status in from device		 */
199     PHASE_MSGIN,				/* message in from device		 */
200     PHASE_DONE,					/* finished				 */
201     PHASE_ABORTED,				/* aborted				 */
202     PHASE_DISCONNECT,				/* disconnecting			 */
203 } phase_t;
204 
205 /*
206  * After interrupt, what to do now
207  */
208 typedef enum {
209     INTR_IDLE,					/* not expecting another IRQ		 */
210     INTR_NEXT_COMMAND,				/* start next command			 */
211     INTR_PROCESSING,				/* interrupt routine still processing	 */
212 } intr_ret_t;
213 
214 /*
215  * DMA direction
216  */
217 typedef enum {
218     DMA_OUT,					/* DMA from memory to chip		*/
219     DMA_IN					/* DMA from chip to memory		*/
220 } dmadir_t;
221 
222 /*
223  * Synchronous transfer state
224  */
225 typedef enum {					/* Synchronous transfer state		*/
226     SYNC_ASYNCHRONOUS,				/* don't negotiate synchronous transfers*/
227     SYNC_NEGOCIATE,				/* start negotiation			*/
228     SYNC_SENT_REQUEST,				/* sent SDTR message			*/
229     SYNC_COMPLETED,				/* received SDTR reply			*/
230 } syncxfer_t;
231 
232 /*
233  * Command type
234  */
235 typedef enum {					/* command type				*/
236     CMD_READ,					/* READ_6, READ_10, READ_12		*/
237     CMD_WRITE,					/* WRITE_6, WRITE_10, WRITE_12		*/
238     CMD_MISC,					/* Others				*/
239 } cmdtype_t;
240 
241 /*
242  * Data phase direction
243  */
244 typedef enum {					/* Data direction			*/
245     DATADIR_IN,					/* Data in phase expected		*/
246     DATADIR_OUT					/* Data out phase expected		*/
247 } datadir_t;
248 
249 #include "queue.h"
250 #include "msgqueue.h"
251 
252 #define STATUS_BUFFER_SIZE	32
253 /*
254  * This is used to dump the previous states of the SBIC
255  */
256 struct status_entry {
257 	unsigned long	when;
258 	unsigned char	ssr;
259 	unsigned char	ph;
260 	unsigned char	irq;
261 	unsigned char	unused;
262 };
263 
264 #define ADD_STATUS(_q,_ssr,_ph,_irq) \
265 ({									\
266 	host->status[(_q)][host->status_ptr[(_q)]].when = jiffies;	\
267 	host->status[(_q)][host->status_ptr[(_q)]].ssr  = (_ssr);	\
268 	host->status[(_q)][host->status_ptr[(_q)]].ph   = (_ph);	\
269 	host->status[(_q)][host->status_ptr[(_q)]].irq  = (_irq);	\
270 	host->status_ptr[(_q)] = (host->status_ptr[(_q)] + 1) & (STATUS_BUFFER_SIZE - 1); \
271 })
272 
273 /*
274  * AcornSCSI host specific data
275  */
276 typedef struct acornscsi_hostdata {
277     /* miscellaneous */
278     struct Scsi_Host	*host;			/* host					*/
279     struct scsi_cmnd	*SCpnt;			/* currently processing command		*/
280     struct scsi_cmnd	*origSCpnt;		/* original connecting command		*/
281     void __iomem	*base;			/* memc base address 			*/
282     void __iomem	*fast;			/* fast ioc base address		*/
283 
284     /* driver information */
285     struct {
286 	unsigned int	irq;			/* interrupt				*/
287 	phase_t		phase;			/* current phase			*/
288 
289 	struct {
290 	    unsigned char	target;		/* reconnected target			*/
291 	    unsigned char	lun;		/* reconnected lun			*/
292 	    unsigned char	tag;		/* reconnected tag			*/
293 	} reconnected;
294 
295 	struct scsi_pointer	SCp;			/* current commands data pointer	*/
296 
297 	MsgQueue_t	msgs;
298 
299 	unsigned short	last_message;		/* last message to be sent		*/
300 	unsigned char	disconnectable:1;	/* this command can be disconnected	*/
301     } scsi;
302 
303     /* statistics information */
304     struct {
305 	unsigned int	queues;
306 	unsigned int	removes;
307 	unsigned int	fins;
308 	unsigned int	reads;
309 	unsigned int	writes;
310 	unsigned int	miscs;
311 	unsigned int	disconnects;
312 	unsigned int	aborts;
313 	unsigned int	resets;
314     } stats;
315 
316     /* queue handling */
317     struct {
318 	Queue_t		issue;			/* issue queue				*/
319 	Queue_t		disconnected;		/* disconnected command queue		*/
320     } queues;
321 
322     /* per-device info */
323     struct {
324 	unsigned char	sync_xfer;		/* synchronous transfer (SBIC value)	*/
325 	syncxfer_t	sync_state;		/* sync xfer negotiation state		*/
326 	unsigned char	disconnect_ok:1;	/* device can disconnect		*/
327     } device[8];
328     unsigned long	busyluns[64 / sizeof(unsigned long)];/* array of bits indicating LUNs busy	*/
329 
330     /* DMA info */
331     struct {
332 	unsigned int	free_addr;		/* next free address			*/
333 	unsigned int	start_addr;		/* start address of current transfer	*/
334 	dmadir_t	direction;		/* dma direction			*/
335 	unsigned int	transferred;		/* number of bytes transferred		*/
336 	unsigned int	xfer_start;		/* scheduled DMA transfer start		*/
337 	unsigned int	xfer_length;		/* scheduled DMA transfer length	*/
338 	char		*xfer_ptr;		/* pointer to area			*/
339 	unsigned char	xfer_required:1;	/* set if we need to transfer something	*/
340 	unsigned char	xfer_setup:1;		/* set if DMA is setup			*/
341 	unsigned char	xfer_done:1;		/* set if DMA reached end of BH list	*/
342     } dma;
343 
344     /* card info */
345     struct {
346 	unsigned char	page_reg;		/* current setting of page reg		*/
347     } card;
348 
349     unsigned char status_ptr[9];
350     struct status_entry status[9][STATUS_BUFFER_SIZE];
351 } AS_Host;
352 
353 #endif /* ACORNSCSI_H */
354