1 /* 2 * Aic94xx SAS/SATA driver SCB management. 3 * 4 * Copyright (C) 2005 Adaptec, Inc. All rights reserved. 5 * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> 6 * 7 * This file is licensed under GPLv2. 8 * 9 * This file is part of the aic94xx driver. 10 * 11 * The aic94xx driver is free software; you can redistribute it and/or 12 * modify it under the terms of the GNU General Public License as 13 * published by the Free Software Foundation; version 2 of the 14 * License. 15 * 16 * The aic94xx driver is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 19 * General Public License for more details. 20 * 21 * You should have received a copy of the GNU General Public License 22 * along with the aic94xx driver; if not, write to the Free Software 23 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 24 * 25 */ 26 27 #include <linux/gfp.h> 28 #include <scsi/scsi_host.h> 29 30 #include "aic94xx.h" 31 #include "aic94xx_reg.h" 32 #include "aic94xx_hwi.h" 33 #include "aic94xx_seq.h" 34 35 #include "aic94xx_dump.h" 36 37 /* ---------- EMPTY SCB ---------- */ 38 39 #define DL_PHY_MASK 7 40 #define BYTES_DMAED 0 41 #define PRIMITIVE_RECVD 0x08 42 #define PHY_EVENT 0x10 43 #define LINK_RESET_ERROR 0x18 44 #define TIMER_EVENT 0x20 45 #define REQ_TASK_ABORT 0xF0 46 #define REQ_DEVICE_RESET 0xF1 47 #define SIGNAL_NCQ_ERROR 0xF2 48 #define CLEAR_NCQ_ERROR 0xF3 49 50 #define PHY_EVENTS_STATUS (CURRENT_LOSS_OF_SIGNAL | CURRENT_OOB_DONE \ 51 | CURRENT_SPINUP_HOLD | CURRENT_GTO_TIMEOUT \ 52 | CURRENT_OOB_ERROR) 53 54 static void get_lrate_mode(struct asd_phy *phy, u8 oob_mode) 55 { 56 struct sas_phy *sas_phy = phy->sas_phy.phy; 57 58 switch (oob_mode & 7) { 59 case PHY_SPEED_60: 60 /* FIXME: sas transport class doesn't have this */ 61 phy->sas_phy.linkrate = SAS_LINK_RATE_6_0_GBPS; 62 phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_6_0_GBPS; 63 break; 64 case PHY_SPEED_30: 65 phy->sas_phy.linkrate = SAS_LINK_RATE_3_0_GBPS; 66 phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS; 67 break; 68 case PHY_SPEED_15: 69 phy->sas_phy.linkrate = SAS_LINK_RATE_1_5_GBPS; 70 phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_1_5_GBPS; 71 break; 72 } 73 sas_phy->negotiated_linkrate = phy->sas_phy.linkrate; 74 sas_phy->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS; 75 sas_phy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS; 76 sas_phy->maximum_linkrate = phy->phy_desc->max_sas_lrate; 77 sas_phy->minimum_linkrate = phy->phy_desc->min_sas_lrate; 78 79 if (oob_mode & SAS_MODE) 80 phy->sas_phy.oob_mode = SAS_OOB_MODE; 81 else if (oob_mode & SATA_MODE) 82 phy->sas_phy.oob_mode = SATA_OOB_MODE; 83 } 84 85 static void asd_phy_event_tasklet(struct asd_ascb *ascb, 86 struct done_list_struct *dl) 87 { 88 struct asd_ha_struct *asd_ha = ascb->ha; 89 struct sas_ha_struct *sas_ha = &asd_ha->sas_ha; 90 int phy_id = dl->status_block[0] & DL_PHY_MASK; 91 struct asd_phy *phy = &asd_ha->phys[phy_id]; 92 93 u8 oob_status = dl->status_block[1] & PHY_EVENTS_STATUS; 94 u8 oob_mode = dl->status_block[2]; 95 96 switch (oob_status) { 97 case CURRENT_LOSS_OF_SIGNAL: 98 /* directly attached device was removed */ 99 ASD_DPRINTK("phy%d: device unplugged\n", phy_id); 100 asd_turn_led(asd_ha, phy_id, 0); 101 sas_phy_disconnected(&phy->sas_phy); 102 sas_ha->notify_phy_event(&phy->sas_phy, PHYE_LOSS_OF_SIGNAL); 103 break; 104 case CURRENT_OOB_DONE: 105 /* hot plugged device */ 106 asd_turn_led(asd_ha, phy_id, 1); 107 get_lrate_mode(phy, oob_mode); 108 ASD_DPRINTK("phy%d device plugged: lrate:0x%x, proto:0x%x\n", 109 phy_id, phy->sas_phy.linkrate, phy->sas_phy.iproto); 110 sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE); 111 break; 112 case CURRENT_SPINUP_HOLD: 113 /* hot plug SATA, no COMWAKE sent */ 114 asd_turn_led(asd_ha, phy_id, 1); 115 sas_ha->notify_phy_event(&phy->sas_phy, PHYE_SPINUP_HOLD); 116 break; 117 case CURRENT_GTO_TIMEOUT: 118 case CURRENT_OOB_ERROR: 119 ASD_DPRINTK("phy%d error while OOB: oob status:0x%x\n", phy_id, 120 dl->status_block[1]); 121 asd_turn_led(asd_ha, phy_id, 0); 122 sas_phy_disconnected(&phy->sas_phy); 123 sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_ERROR); 124 break; 125 } 126 } 127 128 /* If phys are enabled sparsely, this will do the right thing. */ 129 static unsigned ord_phy(struct asd_ha_struct *asd_ha, struct asd_phy *phy) 130 { 131 u8 enabled_mask = asd_ha->hw_prof.enabled_phys; 132 int i, k = 0; 133 134 for_each_phy(enabled_mask, enabled_mask, i) { 135 if (&asd_ha->phys[i] == phy) 136 return k; 137 k++; 138 } 139 return 0; 140 } 141 142 /** 143 * asd_get_attached_sas_addr -- extract/generate attached SAS address 144 * phy: pointer to asd_phy 145 * sas_addr: pointer to buffer where the SAS address is to be written 146 * 147 * This function extracts the SAS address from an IDENTIFY frame 148 * received. If OOB is SATA, then a SAS address is generated from the 149 * HA tables. 150 * 151 * LOCKING: the frame_rcvd_lock needs to be held since this parses the frame 152 * buffer. 153 */ 154 static void asd_get_attached_sas_addr(struct asd_phy *phy, u8 *sas_addr) 155 { 156 if (phy->sas_phy.frame_rcvd[0] == 0x34 157 && phy->sas_phy.oob_mode == SATA_OOB_MODE) { 158 struct asd_ha_struct *asd_ha = phy->sas_phy.ha->lldd_ha; 159 /* FIS device-to-host */ 160 u64 addr = be64_to_cpu(*(__be64 *)phy->phy_desc->sas_addr); 161 162 addr += asd_ha->hw_prof.sata_name_base + ord_phy(asd_ha, phy); 163 *(__be64 *)sas_addr = cpu_to_be64(addr); 164 } else { 165 struct sas_identify_frame *idframe = 166 (void *) phy->sas_phy.frame_rcvd; 167 memcpy(sas_addr, idframe->sas_addr, SAS_ADDR_SIZE); 168 } 169 } 170 171 static void asd_form_port(struct asd_ha_struct *asd_ha, struct asd_phy *phy) 172 { 173 int i; 174 struct asd_port *free_port = NULL; 175 struct asd_port *port; 176 struct asd_sas_phy *sas_phy = &phy->sas_phy; 177 unsigned long flags; 178 179 spin_lock_irqsave(&asd_ha->asd_ports_lock, flags); 180 if (!phy->asd_port) { 181 for (i = 0; i < ASD_MAX_PHYS; i++) { 182 port = &asd_ha->asd_ports[i]; 183 184 /* Check for wide port */ 185 if (port->num_phys > 0 && 186 memcmp(port->sas_addr, sas_phy->sas_addr, 187 SAS_ADDR_SIZE) == 0 && 188 memcmp(port->attached_sas_addr, 189 sas_phy->attached_sas_addr, 190 SAS_ADDR_SIZE) == 0) { 191 break; 192 } 193 194 /* Find a free port */ 195 if (port->num_phys == 0 && free_port == NULL) { 196 free_port = port; 197 } 198 } 199 200 /* Use a free port if this doesn't form a wide port */ 201 if (i >= ASD_MAX_PHYS) { 202 port = free_port; 203 BUG_ON(!port); 204 memcpy(port->sas_addr, sas_phy->sas_addr, 205 SAS_ADDR_SIZE); 206 memcpy(port->attached_sas_addr, 207 sas_phy->attached_sas_addr, 208 SAS_ADDR_SIZE); 209 } 210 port->num_phys++; 211 port->phy_mask |= (1U << sas_phy->id); 212 phy->asd_port = port; 213 } 214 ASD_DPRINTK("%s: updating phy_mask 0x%x for phy%d\n", 215 __func__, phy->asd_port->phy_mask, sas_phy->id); 216 asd_update_port_links(asd_ha, phy); 217 spin_unlock_irqrestore(&asd_ha->asd_ports_lock, flags); 218 } 219 220 static void asd_deform_port(struct asd_ha_struct *asd_ha, struct asd_phy *phy) 221 { 222 struct asd_port *port = phy->asd_port; 223 struct asd_sas_phy *sas_phy = &phy->sas_phy; 224 unsigned long flags; 225 226 spin_lock_irqsave(&asd_ha->asd_ports_lock, flags); 227 if (port) { 228 port->num_phys--; 229 port->phy_mask &= ~(1U << sas_phy->id); 230 phy->asd_port = NULL; 231 } 232 spin_unlock_irqrestore(&asd_ha->asd_ports_lock, flags); 233 } 234 235 static void asd_bytes_dmaed_tasklet(struct asd_ascb *ascb, 236 struct done_list_struct *dl, 237 int edb_id, int phy_id) 238 { 239 unsigned long flags; 240 int edb_el = edb_id + ascb->edb_index; 241 struct asd_dma_tok *edb = ascb->ha->seq.edb_arr[edb_el]; 242 struct asd_phy *phy = &ascb->ha->phys[phy_id]; 243 struct sas_ha_struct *sas_ha = phy->sas_phy.ha; 244 u16 size = ((dl->status_block[3] & 7) << 8) | dl->status_block[2]; 245 246 size = min(size, (u16) sizeof(phy->frame_rcvd)); 247 248 spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags); 249 memcpy(phy->sas_phy.frame_rcvd, edb->vaddr, size); 250 phy->sas_phy.frame_rcvd_size = size; 251 asd_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr); 252 spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags); 253 asd_dump_frame_rcvd(phy, dl); 254 asd_form_port(ascb->ha, phy); 255 sas_ha->notify_port_event(&phy->sas_phy, PORTE_BYTES_DMAED); 256 } 257 258 static void asd_link_reset_err_tasklet(struct asd_ascb *ascb, 259 struct done_list_struct *dl, 260 int phy_id) 261 { 262 struct asd_ha_struct *asd_ha = ascb->ha; 263 struct sas_ha_struct *sas_ha = &asd_ha->sas_ha; 264 struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id]; 265 struct asd_phy *phy = &asd_ha->phys[phy_id]; 266 u8 lr_error = dl->status_block[1]; 267 u8 retries_left = dl->status_block[2]; 268 269 switch (lr_error) { 270 case 0: 271 ASD_DPRINTK("phy%d: Receive ID timer expired\n", phy_id); 272 break; 273 case 1: 274 ASD_DPRINTK("phy%d: Loss of signal\n", phy_id); 275 break; 276 case 2: 277 ASD_DPRINTK("phy%d: Loss of dword sync\n", phy_id); 278 break; 279 case 3: 280 ASD_DPRINTK("phy%d: Receive FIS timeout\n", phy_id); 281 break; 282 default: 283 ASD_DPRINTK("phy%d: unknown link reset error code: 0x%x\n", 284 phy_id, lr_error); 285 break; 286 } 287 288 asd_turn_led(asd_ha, phy_id, 0); 289 sas_phy_disconnected(sas_phy); 290 asd_deform_port(asd_ha, phy); 291 sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR); 292 293 if (retries_left == 0) { 294 int num = 1; 295 struct asd_ascb *cp = asd_ascb_alloc_list(ascb->ha, &num, 296 GFP_ATOMIC); 297 if (!cp) { 298 asd_printk("%s: out of memory\n", __func__); 299 goto out; 300 } 301 ASD_DPRINTK("phy%d: retries:0 performing link reset seq\n", 302 phy_id); 303 asd_build_control_phy(cp, phy_id, ENABLE_PHY); 304 if (asd_post_ascb_list(ascb->ha, cp, 1) != 0) 305 asd_ascb_free(cp); 306 } 307 out: 308 ; 309 } 310 311 static void asd_primitive_rcvd_tasklet(struct asd_ascb *ascb, 312 struct done_list_struct *dl, 313 int phy_id) 314 { 315 unsigned long flags; 316 struct sas_ha_struct *sas_ha = &ascb->ha->sas_ha; 317 struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id]; 318 struct asd_ha_struct *asd_ha = ascb->ha; 319 struct asd_phy *phy = &asd_ha->phys[phy_id]; 320 u8 reg = dl->status_block[1]; 321 u32 cont = dl->status_block[2] << ((reg & 3)*8); 322 323 reg &= ~3; 324 switch (reg) { 325 case LmPRMSTAT0BYTE0: 326 switch (cont) { 327 case LmBROADCH: 328 case LmBROADRVCH0: 329 case LmBROADRVCH1: 330 case LmBROADSES: 331 ASD_DPRINTK("phy%d: BROADCAST change received:%d\n", 332 phy_id, cont); 333 spin_lock_irqsave(&sas_phy->sas_prim_lock, flags); 334 sas_phy->sas_prim = ffs(cont); 335 spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags); 336 sas_ha->notify_port_event(sas_phy,PORTE_BROADCAST_RCVD); 337 break; 338 339 case LmUNKNOWNP: 340 ASD_DPRINTK("phy%d: unknown BREAK\n", phy_id); 341 break; 342 343 default: 344 ASD_DPRINTK("phy%d: primitive reg:0x%x, cont:0x%04x\n", 345 phy_id, reg, cont); 346 break; 347 } 348 break; 349 case LmPRMSTAT1BYTE0: 350 switch (cont) { 351 case LmHARDRST: 352 ASD_DPRINTK("phy%d: HARD_RESET primitive rcvd\n", 353 phy_id); 354 /* The sequencer disables all phys on that port. 355 * We have to re-enable the phys ourselves. */ 356 asd_deform_port(asd_ha, phy); 357 sas_ha->notify_port_event(sas_phy, PORTE_HARD_RESET); 358 break; 359 360 default: 361 ASD_DPRINTK("phy%d: primitive reg:0x%x, cont:0x%04x\n", 362 phy_id, reg, cont); 363 break; 364 } 365 break; 366 default: 367 ASD_DPRINTK("unknown primitive register:0x%x\n", 368 dl->status_block[1]); 369 break; 370 } 371 } 372 373 /** 374 * asd_invalidate_edb -- invalidate an EDB and if necessary post the ESCB 375 * @ascb: pointer to Empty SCB 376 * @edb_id: index [0,6] to the empty data buffer which is to be invalidated 377 * 378 * After an EDB has been invalidated, if all EDBs in this ESCB have been 379 * invalidated, the ESCB is posted back to the sequencer. 380 * Context is tasklet/IRQ. 381 */ 382 void asd_invalidate_edb(struct asd_ascb *ascb, int edb_id) 383 { 384 struct asd_seq_data *seq = &ascb->ha->seq; 385 struct empty_scb *escb = &ascb->scb->escb; 386 struct sg_el *eb = &escb->eb[edb_id]; 387 struct asd_dma_tok *edb = seq->edb_arr[ascb->edb_index + edb_id]; 388 389 memset(edb->vaddr, 0, ASD_EDB_SIZE); 390 eb->flags |= ELEMENT_NOT_VALID; 391 escb->num_valid--; 392 393 if (escb->num_valid == 0) { 394 int i; 395 /* ASD_DPRINTK("reposting escb: vaddr: 0x%p, " 396 "dma_handle: 0x%08llx, next: 0x%08llx, " 397 "index:%d, opcode:0x%02x\n", 398 ascb->dma_scb.vaddr, 399 (u64)ascb->dma_scb.dma_handle, 400 le64_to_cpu(ascb->scb->header.next_scb), 401 le16_to_cpu(ascb->scb->header.index), 402 ascb->scb->header.opcode); 403 */ 404 escb->num_valid = ASD_EDBS_PER_SCB; 405 for (i = 0; i < ASD_EDBS_PER_SCB; i++) 406 escb->eb[i].flags = 0; 407 if (!list_empty(&ascb->list)) 408 list_del_init(&ascb->list); 409 i = asd_post_escb_list(ascb->ha, ascb, 1); 410 if (i) 411 asd_printk("couldn't post escb, err:%d\n", i); 412 } 413 } 414 415 static void escb_tasklet_complete(struct asd_ascb *ascb, 416 struct done_list_struct *dl) 417 { 418 struct asd_ha_struct *asd_ha = ascb->ha; 419 struct sas_ha_struct *sas_ha = &asd_ha->sas_ha; 420 int edb = (dl->opcode & DL_PHY_MASK) - 1; /* [0xc1,0xc7] -> [0,6] */ 421 u8 sb_opcode = dl->status_block[0]; 422 int phy_id = sb_opcode & DL_PHY_MASK; 423 struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id]; 424 struct asd_phy *phy = &asd_ha->phys[phy_id]; 425 426 if (edb > 6 || edb < 0) { 427 ASD_DPRINTK("edb is 0x%x! dl->opcode is 0x%x\n", 428 edb, dl->opcode); 429 ASD_DPRINTK("sb_opcode : 0x%x, phy_id: 0x%x\n", 430 sb_opcode, phy_id); 431 ASD_DPRINTK("escb: vaddr: 0x%p, " 432 "dma_handle: 0x%llx, next: 0x%llx, " 433 "index:%d, opcode:0x%02x\n", 434 ascb->dma_scb.vaddr, 435 (unsigned long long)ascb->dma_scb.dma_handle, 436 (unsigned long long) 437 le64_to_cpu(ascb->scb->header.next_scb), 438 le16_to_cpu(ascb->scb->header.index), 439 ascb->scb->header.opcode); 440 } 441 442 /* Catch these before we mask off the sb_opcode bits */ 443 switch (sb_opcode) { 444 case REQ_TASK_ABORT: { 445 struct asd_ascb *a, *b; 446 u16 tc_abort; 447 struct domain_device *failed_dev = NULL; 448 449 ASD_DPRINTK("%s: REQ_TASK_ABORT, reason=0x%X\n", 450 __func__, dl->status_block[3]); 451 452 /* 453 * Find the task that caused the abort and abort it first. 454 * The sequencer won't put anything on the done list until 455 * that happens. 456 */ 457 tc_abort = *((u16*)(&dl->status_block[1])); 458 tc_abort = le16_to_cpu(tc_abort); 459 460 list_for_each_entry_safe(a, b, &asd_ha->seq.pend_q, list) { 461 struct sas_task *task = a->uldd_task; 462 463 if (a->tc_index != tc_abort) 464 continue; 465 466 if (task) { 467 failed_dev = task->dev; 468 sas_task_abort(task); 469 } else { 470 ASD_DPRINTK("R_T_A for non TASK scb 0x%x\n", 471 a->scb->header.opcode); 472 } 473 break; 474 } 475 476 if (!failed_dev) { 477 ASD_DPRINTK("%s: Can't find task (tc=%d) to abort!\n", 478 __func__, tc_abort); 479 goto out; 480 } 481 482 /* 483 * Now abort everything else for that device (hba?) so 484 * that the EH will wake up and do something. 485 */ 486 list_for_each_entry_safe(a, b, &asd_ha->seq.pend_q, list) { 487 struct sas_task *task = a->uldd_task; 488 489 if (task && 490 task->dev == failed_dev && 491 a->tc_index != tc_abort) 492 sas_task_abort(task); 493 } 494 495 goto out; 496 } 497 case REQ_DEVICE_RESET: { 498 struct asd_ascb *a; 499 u16 conn_handle; 500 unsigned long flags; 501 struct sas_task *last_dev_task = NULL; 502 503 conn_handle = *((u16*)(&dl->status_block[1])); 504 conn_handle = le16_to_cpu(conn_handle); 505 506 ASD_DPRINTK("%s: REQ_DEVICE_RESET, reason=0x%X\n", __func__, 507 dl->status_block[3]); 508 509 /* Find the last pending task for the device... */ 510 list_for_each_entry(a, &asd_ha->seq.pend_q, list) { 511 u16 x; 512 struct domain_device *dev; 513 struct sas_task *task = a->uldd_task; 514 515 if (!task) 516 continue; 517 dev = task->dev; 518 519 x = (unsigned long)dev->lldd_dev; 520 if (x == conn_handle) 521 last_dev_task = task; 522 } 523 524 if (!last_dev_task) { 525 ASD_DPRINTK("%s: Device reset for idle device %d?\n", 526 __func__, conn_handle); 527 goto out; 528 } 529 530 /* ...and set the reset flag */ 531 spin_lock_irqsave(&last_dev_task->task_state_lock, flags); 532 last_dev_task->task_state_flags |= SAS_TASK_NEED_DEV_RESET; 533 spin_unlock_irqrestore(&last_dev_task->task_state_lock, flags); 534 535 /* Kill all pending tasks for the device */ 536 list_for_each_entry(a, &asd_ha->seq.pend_q, list) { 537 u16 x; 538 struct domain_device *dev; 539 struct sas_task *task = a->uldd_task; 540 541 if (!task) 542 continue; 543 dev = task->dev; 544 545 x = (unsigned long)dev->lldd_dev; 546 if (x == conn_handle) 547 sas_task_abort(task); 548 } 549 550 goto out; 551 } 552 case SIGNAL_NCQ_ERROR: 553 ASD_DPRINTK("%s: SIGNAL_NCQ_ERROR\n", __func__); 554 goto out; 555 case CLEAR_NCQ_ERROR: 556 ASD_DPRINTK("%s: CLEAR_NCQ_ERROR\n", __func__); 557 goto out; 558 } 559 560 sb_opcode &= ~DL_PHY_MASK; 561 562 switch (sb_opcode) { 563 case BYTES_DMAED: 564 ASD_DPRINTK("%s: phy%d: BYTES_DMAED\n", __func__, phy_id); 565 asd_bytes_dmaed_tasklet(ascb, dl, edb, phy_id); 566 break; 567 case PRIMITIVE_RECVD: 568 ASD_DPRINTK("%s: phy%d: PRIMITIVE_RECVD\n", __func__, 569 phy_id); 570 asd_primitive_rcvd_tasklet(ascb, dl, phy_id); 571 break; 572 case PHY_EVENT: 573 ASD_DPRINTK("%s: phy%d: PHY_EVENT\n", __func__, phy_id); 574 asd_phy_event_tasklet(ascb, dl); 575 break; 576 case LINK_RESET_ERROR: 577 ASD_DPRINTK("%s: phy%d: LINK_RESET_ERROR\n", __func__, 578 phy_id); 579 asd_link_reset_err_tasklet(ascb, dl, phy_id); 580 break; 581 case TIMER_EVENT: 582 ASD_DPRINTK("%s: phy%d: TIMER_EVENT, lost dw sync\n", 583 __func__, phy_id); 584 asd_turn_led(asd_ha, phy_id, 0); 585 /* the device is gone */ 586 sas_phy_disconnected(sas_phy); 587 asd_deform_port(asd_ha, phy); 588 sas_ha->notify_port_event(sas_phy, PORTE_TIMER_EVENT); 589 break; 590 default: 591 ASD_DPRINTK("%s: phy%d: unknown event:0x%x\n", __func__, 592 phy_id, sb_opcode); 593 ASD_DPRINTK("edb is 0x%x! dl->opcode is 0x%x\n", 594 edb, dl->opcode); 595 ASD_DPRINTK("sb_opcode : 0x%x, phy_id: 0x%x\n", 596 sb_opcode, phy_id); 597 ASD_DPRINTK("escb: vaddr: 0x%p, " 598 "dma_handle: 0x%llx, next: 0x%llx, " 599 "index:%d, opcode:0x%02x\n", 600 ascb->dma_scb.vaddr, 601 (unsigned long long)ascb->dma_scb.dma_handle, 602 (unsigned long long) 603 le64_to_cpu(ascb->scb->header.next_scb), 604 le16_to_cpu(ascb->scb->header.index), 605 ascb->scb->header.opcode); 606 607 break; 608 } 609 out: 610 asd_invalidate_edb(ascb, edb); 611 } 612 613 int asd_init_post_escbs(struct asd_ha_struct *asd_ha) 614 { 615 struct asd_seq_data *seq = &asd_ha->seq; 616 int i; 617 618 for (i = 0; i < seq->num_escbs; i++) 619 seq->escb_arr[i]->tasklet_complete = escb_tasklet_complete; 620 621 ASD_DPRINTK("posting %d escbs\n", i); 622 return asd_post_escb_list(asd_ha, seq->escb_arr[0], seq->num_escbs); 623 } 624 625 /* ---------- CONTROL PHY ---------- */ 626 627 #define CONTROL_PHY_STATUS (CURRENT_DEVICE_PRESENT | CURRENT_OOB_DONE \ 628 | CURRENT_SPINUP_HOLD | CURRENT_GTO_TIMEOUT \ 629 | CURRENT_OOB_ERROR) 630 631 /** 632 * control_phy_tasklet_complete -- tasklet complete for CONTROL PHY ascb 633 * @ascb: pointer to an ascb 634 * @dl: pointer to the done list entry 635 * 636 * This function completes a CONTROL PHY scb and frees the ascb. 637 * A note on LEDs: 638 * - an LED blinks if there is IO though it, 639 * - if a device is connected to the LED, it is lit, 640 * - if no device is connected to the LED, is is dimmed (off). 641 */ 642 static void control_phy_tasklet_complete(struct asd_ascb *ascb, 643 struct done_list_struct *dl) 644 { 645 struct asd_ha_struct *asd_ha = ascb->ha; 646 struct scb *scb = ascb->scb; 647 struct control_phy *control_phy = &scb->control_phy; 648 u8 phy_id = control_phy->phy_id; 649 struct asd_phy *phy = &ascb->ha->phys[phy_id]; 650 651 u8 status = dl->status_block[0]; 652 u8 oob_status = dl->status_block[1]; 653 u8 oob_mode = dl->status_block[2]; 654 /* u8 oob_signals= dl->status_block[3]; */ 655 656 if (status != 0) { 657 ASD_DPRINTK("%s: phy%d status block opcode:0x%x\n", 658 __func__, phy_id, status); 659 goto out; 660 } 661 662 switch (control_phy->sub_func) { 663 case DISABLE_PHY: 664 asd_ha->hw_prof.enabled_phys &= ~(1 << phy_id); 665 asd_turn_led(asd_ha, phy_id, 0); 666 asd_control_led(asd_ha, phy_id, 0); 667 ASD_DPRINTK("%s: disable phy%d\n", __func__, phy_id); 668 break; 669 670 case ENABLE_PHY: 671 asd_control_led(asd_ha, phy_id, 1); 672 if (oob_status & CURRENT_OOB_DONE) { 673 asd_ha->hw_prof.enabled_phys |= (1 << phy_id); 674 get_lrate_mode(phy, oob_mode); 675 asd_turn_led(asd_ha, phy_id, 1); 676 ASD_DPRINTK("%s: phy%d, lrate:0x%x, proto:0x%x\n", 677 __func__, phy_id,phy->sas_phy.linkrate, 678 phy->sas_phy.iproto); 679 } else if (oob_status & CURRENT_SPINUP_HOLD) { 680 asd_ha->hw_prof.enabled_phys |= (1 << phy_id); 681 asd_turn_led(asd_ha, phy_id, 1); 682 ASD_DPRINTK("%s: phy%d, spinup hold\n", __func__, 683 phy_id); 684 } else if (oob_status & CURRENT_ERR_MASK) { 685 asd_turn_led(asd_ha, phy_id, 0); 686 ASD_DPRINTK("%s: phy%d: error: oob status:0x%02x\n", 687 __func__, phy_id, oob_status); 688 } else if (oob_status & (CURRENT_HOT_PLUG_CNCT 689 | CURRENT_DEVICE_PRESENT)) { 690 asd_ha->hw_prof.enabled_phys |= (1 << phy_id); 691 asd_turn_led(asd_ha, phy_id, 1); 692 ASD_DPRINTK("%s: phy%d: hot plug or device present\n", 693 __func__, phy_id); 694 } else { 695 asd_ha->hw_prof.enabled_phys |= (1 << phy_id); 696 asd_turn_led(asd_ha, phy_id, 0); 697 ASD_DPRINTK("%s: phy%d: no device present: " 698 "oob_status:0x%x\n", 699 __func__, phy_id, oob_status); 700 } 701 break; 702 case RELEASE_SPINUP_HOLD: 703 case PHY_NO_OP: 704 case EXECUTE_HARD_RESET: 705 ASD_DPRINTK("%s: phy%d: sub_func:0x%x\n", __func__, 706 phy_id, control_phy->sub_func); 707 /* XXX finish */ 708 break; 709 default: 710 ASD_DPRINTK("%s: phy%d: sub_func:0x%x?\n", __func__, 711 phy_id, control_phy->sub_func); 712 break; 713 } 714 out: 715 asd_ascb_free(ascb); 716 } 717 718 static void set_speed_mask(u8 *speed_mask, struct asd_phy_desc *pd) 719 { 720 /* disable all speeds, then enable defaults */ 721 *speed_mask = SAS_SPEED_60_DIS | SAS_SPEED_30_DIS | SAS_SPEED_15_DIS 722 | SATA_SPEED_30_DIS | SATA_SPEED_15_DIS; 723 724 switch (pd->max_sas_lrate) { 725 case SAS_LINK_RATE_6_0_GBPS: 726 *speed_mask &= ~SAS_SPEED_60_DIS; 727 default: 728 case SAS_LINK_RATE_3_0_GBPS: 729 *speed_mask &= ~SAS_SPEED_30_DIS; 730 case SAS_LINK_RATE_1_5_GBPS: 731 *speed_mask &= ~SAS_SPEED_15_DIS; 732 } 733 734 switch (pd->min_sas_lrate) { 735 case SAS_LINK_RATE_6_0_GBPS: 736 *speed_mask |= SAS_SPEED_30_DIS; 737 case SAS_LINK_RATE_3_0_GBPS: 738 *speed_mask |= SAS_SPEED_15_DIS; 739 default: 740 case SAS_LINK_RATE_1_5_GBPS: 741 /* nothing to do */ 742 ; 743 } 744 745 switch (pd->max_sata_lrate) { 746 case SAS_LINK_RATE_3_0_GBPS: 747 *speed_mask &= ~SATA_SPEED_30_DIS; 748 default: 749 case SAS_LINK_RATE_1_5_GBPS: 750 *speed_mask &= ~SATA_SPEED_15_DIS; 751 } 752 753 switch (pd->min_sata_lrate) { 754 case SAS_LINK_RATE_3_0_GBPS: 755 *speed_mask |= SATA_SPEED_15_DIS; 756 default: 757 case SAS_LINK_RATE_1_5_GBPS: 758 /* nothing to do */ 759 ; 760 } 761 } 762 763 /** 764 * asd_build_control_phy -- build a CONTROL PHY SCB 765 * @ascb: pointer to an ascb 766 * @phy_id: phy id to control, integer 767 * @subfunc: subfunction, what to actually to do the phy 768 * 769 * This function builds a CONTROL PHY scb. No allocation of any kind 770 * is performed. @ascb is allocated with the list function. 771 * The caller can override the ascb->tasklet_complete to point 772 * to its own callback function. It must call asd_ascb_free() 773 * at its tasklet complete function. 774 * See the default implementation. 775 */ 776 void asd_build_control_phy(struct asd_ascb *ascb, int phy_id, u8 subfunc) 777 { 778 struct asd_phy *phy = &ascb->ha->phys[phy_id]; 779 struct scb *scb = ascb->scb; 780 struct control_phy *control_phy = &scb->control_phy; 781 782 scb->header.opcode = CONTROL_PHY; 783 control_phy->phy_id = (u8) phy_id; 784 control_phy->sub_func = subfunc; 785 786 switch (subfunc) { 787 case EXECUTE_HARD_RESET: /* 0x81 */ 788 case ENABLE_PHY: /* 0x01 */ 789 /* decide hot plug delay */ 790 control_phy->hot_plug_delay = HOTPLUG_DELAY_TIMEOUT; 791 792 /* decide speed mask */ 793 set_speed_mask(&control_phy->speed_mask, phy->phy_desc); 794 795 /* initiator port settings are in the hi nibble */ 796 if (phy->sas_phy.role == PHY_ROLE_INITIATOR) 797 control_phy->port_type = SAS_PROTOCOL_ALL << 4; 798 else if (phy->sas_phy.role == PHY_ROLE_TARGET) 799 control_phy->port_type = SAS_PROTOCOL_ALL; 800 else 801 control_phy->port_type = 802 (SAS_PROTOCOL_ALL << 4) | SAS_PROTOCOL_ALL; 803 804 /* link reset retries, this should be nominal */ 805 control_phy->link_reset_retries = 10; 806 807 case RELEASE_SPINUP_HOLD: /* 0x02 */ 808 /* decide the func_mask */ 809 control_phy->func_mask = FUNCTION_MASK_DEFAULT; 810 if (phy->phy_desc->flags & ASD_SATA_SPINUP_HOLD) 811 control_phy->func_mask &= ~SPINUP_HOLD_DIS; 812 else 813 control_phy->func_mask |= SPINUP_HOLD_DIS; 814 } 815 816 control_phy->conn_handle = cpu_to_le16(0xFFFF); 817 818 ascb->tasklet_complete = control_phy_tasklet_complete; 819 } 820 821 /* ---------- INITIATE LINK ADM TASK ---------- */ 822 823 #if 0 824 825 static void link_adm_tasklet_complete(struct asd_ascb *ascb, 826 struct done_list_struct *dl) 827 { 828 u8 opcode = dl->opcode; 829 struct initiate_link_adm *link_adm = &ascb->scb->link_adm; 830 u8 phy_id = link_adm->phy_id; 831 832 if (opcode != TC_NO_ERROR) { 833 asd_printk("phy%d: link adm task 0x%x completed with error " 834 "0x%x\n", phy_id, link_adm->sub_func, opcode); 835 } 836 ASD_DPRINTK("phy%d: link adm task 0x%x: 0x%x\n", 837 phy_id, link_adm->sub_func, opcode); 838 839 asd_ascb_free(ascb); 840 } 841 842 void asd_build_initiate_link_adm_task(struct asd_ascb *ascb, int phy_id, 843 u8 subfunc) 844 { 845 struct scb *scb = ascb->scb; 846 struct initiate_link_adm *link_adm = &scb->link_adm; 847 848 scb->header.opcode = INITIATE_LINK_ADM_TASK; 849 850 link_adm->phy_id = phy_id; 851 link_adm->sub_func = subfunc; 852 link_adm->conn_handle = cpu_to_le16(0xFFFF); 853 854 ascb->tasklet_complete = link_adm_tasklet_complete; 855 } 856 857 #endif /* 0 */ 858 859 /* ---------- SCB timer ---------- */ 860 861 /** 862 * asd_ascb_timedout -- called when a pending SCB's timer has expired 863 * @data: unsigned long, a pointer to the ascb in question 864 * 865 * This is the default timeout function which does the most necessary. 866 * Upper layers can implement their own timeout function, say to free 867 * resources they have with this SCB, and then call this one at the 868 * end of their timeout function. To do this, one should initialize 869 * the ascb->timer.{function, data, expires} prior to calling the post 870 * function. The timer is started by the post function. 871 */ 872 void asd_ascb_timedout(unsigned long data) 873 { 874 struct asd_ascb *ascb = (void *) data; 875 struct asd_seq_data *seq = &ascb->ha->seq; 876 unsigned long flags; 877 878 ASD_DPRINTK("scb:0x%x timed out\n", ascb->scb->header.opcode); 879 880 spin_lock_irqsave(&seq->pend_q_lock, flags); 881 seq->pending--; 882 list_del_init(&ascb->list); 883 spin_unlock_irqrestore(&seq->pend_q_lock, flags); 884 885 asd_ascb_free(ascb); 886 } 887 888 /* ---------- CONTROL PHY ---------- */ 889 890 /* Given the spec value, return a driver value. */ 891 static const int phy_func_table[] = { 892 [PHY_FUNC_NOP] = PHY_NO_OP, 893 [PHY_FUNC_LINK_RESET] = ENABLE_PHY, 894 [PHY_FUNC_HARD_RESET] = EXECUTE_HARD_RESET, 895 [PHY_FUNC_DISABLE] = DISABLE_PHY, 896 [PHY_FUNC_RELEASE_SPINUP_HOLD] = RELEASE_SPINUP_HOLD, 897 }; 898 899 int asd_control_phy(struct asd_sas_phy *phy, enum phy_func func, void *arg) 900 { 901 struct asd_ha_struct *asd_ha = phy->ha->lldd_ha; 902 struct asd_phy_desc *pd = asd_ha->phys[phy->id].phy_desc; 903 struct asd_ascb *ascb; 904 struct sas_phy_linkrates *rates; 905 int res = 1; 906 907 switch (func) { 908 case PHY_FUNC_CLEAR_ERROR_LOG: 909 case PHY_FUNC_GET_EVENTS: 910 return -ENOSYS; 911 case PHY_FUNC_SET_LINK_RATE: 912 rates = arg; 913 if (rates->minimum_linkrate) { 914 pd->min_sas_lrate = rates->minimum_linkrate; 915 pd->min_sata_lrate = rates->minimum_linkrate; 916 } 917 if (rates->maximum_linkrate) { 918 pd->max_sas_lrate = rates->maximum_linkrate; 919 pd->max_sata_lrate = rates->maximum_linkrate; 920 } 921 func = PHY_FUNC_LINK_RESET; 922 break; 923 default: 924 break; 925 } 926 927 ascb = asd_ascb_alloc_list(asd_ha, &res, GFP_KERNEL); 928 if (!ascb) 929 return -ENOMEM; 930 931 asd_build_control_phy(ascb, phy->id, phy_func_table[func]); 932 res = asd_post_ascb_list(asd_ha, ascb , 1); 933 if (res) 934 asd_ascb_free(ascb); 935 936 return res; 937 } 938