1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Aic94xx SAS/SATA driver SCB management. 4 * 5 * Copyright (C) 2005 Adaptec, Inc. All rights reserved. 6 * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> 7 */ 8 9 #include <linux/gfp.h> 10 #include <scsi/scsi_host.h> 11 12 #include "aic94xx.h" 13 #include "aic94xx_reg.h" 14 #include "aic94xx_hwi.h" 15 #include "aic94xx_seq.h" 16 17 #include "aic94xx_dump.h" 18 19 /* ---------- EMPTY SCB ---------- */ 20 21 #define DL_PHY_MASK 7 22 #define BYTES_DMAED 0 23 #define PRIMITIVE_RECVD 0x08 24 #define PHY_EVENT 0x10 25 #define LINK_RESET_ERROR 0x18 26 #define TIMER_EVENT 0x20 27 #define REQ_TASK_ABORT 0xF0 28 #define REQ_DEVICE_RESET 0xF1 29 #define SIGNAL_NCQ_ERROR 0xF2 30 #define CLEAR_NCQ_ERROR 0xF3 31 32 #define PHY_EVENTS_STATUS (CURRENT_LOSS_OF_SIGNAL | CURRENT_OOB_DONE \ 33 | CURRENT_SPINUP_HOLD | CURRENT_GTO_TIMEOUT \ 34 | CURRENT_OOB_ERROR) 35 36 static void get_lrate_mode(struct asd_phy *phy, u8 oob_mode) 37 { 38 struct sas_phy *sas_phy = phy->sas_phy.phy; 39 40 switch (oob_mode & 7) { 41 case PHY_SPEED_60: 42 /* FIXME: sas transport class doesn't have this */ 43 phy->sas_phy.linkrate = SAS_LINK_RATE_6_0_GBPS; 44 phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_6_0_GBPS; 45 break; 46 case PHY_SPEED_30: 47 phy->sas_phy.linkrate = SAS_LINK_RATE_3_0_GBPS; 48 phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS; 49 break; 50 case PHY_SPEED_15: 51 phy->sas_phy.linkrate = SAS_LINK_RATE_1_5_GBPS; 52 phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_1_5_GBPS; 53 break; 54 } 55 sas_phy->negotiated_linkrate = phy->sas_phy.linkrate; 56 sas_phy->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS; 57 sas_phy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS; 58 sas_phy->maximum_linkrate = phy->phy_desc->max_sas_lrate; 59 sas_phy->minimum_linkrate = phy->phy_desc->min_sas_lrate; 60 61 if (oob_mode & SAS_MODE) 62 phy->sas_phy.oob_mode = SAS_OOB_MODE; 63 else if (oob_mode & SATA_MODE) 64 phy->sas_phy.oob_mode = SATA_OOB_MODE; 65 } 66 67 static void asd_phy_event_tasklet(struct asd_ascb *ascb, 68 struct done_list_struct *dl) 69 { 70 struct asd_ha_struct *asd_ha = ascb->ha; 71 struct sas_ha_struct *sas_ha = &asd_ha->sas_ha; 72 int phy_id = dl->status_block[0] & DL_PHY_MASK; 73 struct asd_phy *phy = &asd_ha->phys[phy_id]; 74 75 u8 oob_status = dl->status_block[1] & PHY_EVENTS_STATUS; 76 u8 oob_mode = dl->status_block[2]; 77 78 switch (oob_status) { 79 case CURRENT_LOSS_OF_SIGNAL: 80 /* directly attached device was removed */ 81 ASD_DPRINTK("phy%d: device unplugged\n", phy_id); 82 asd_turn_led(asd_ha, phy_id, 0); 83 sas_phy_disconnected(&phy->sas_phy); 84 sas_ha->notify_phy_event(&phy->sas_phy, PHYE_LOSS_OF_SIGNAL); 85 break; 86 case CURRENT_OOB_DONE: 87 /* hot plugged device */ 88 asd_turn_led(asd_ha, phy_id, 1); 89 get_lrate_mode(phy, oob_mode); 90 ASD_DPRINTK("phy%d device plugged: lrate:0x%x, proto:0x%x\n", 91 phy_id, phy->sas_phy.linkrate, phy->sas_phy.iproto); 92 sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE); 93 break; 94 case CURRENT_SPINUP_HOLD: 95 /* hot plug SATA, no COMWAKE sent */ 96 asd_turn_led(asd_ha, phy_id, 1); 97 sas_ha->notify_phy_event(&phy->sas_phy, PHYE_SPINUP_HOLD); 98 break; 99 case CURRENT_GTO_TIMEOUT: 100 case CURRENT_OOB_ERROR: 101 ASD_DPRINTK("phy%d error while OOB: oob status:0x%x\n", phy_id, 102 dl->status_block[1]); 103 asd_turn_led(asd_ha, phy_id, 0); 104 sas_phy_disconnected(&phy->sas_phy); 105 sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_ERROR); 106 break; 107 } 108 } 109 110 /* If phys are enabled sparsely, this will do the right thing. */ 111 static unsigned ord_phy(struct asd_ha_struct *asd_ha, struct asd_phy *phy) 112 { 113 u8 enabled_mask = asd_ha->hw_prof.enabled_phys; 114 int i, k = 0; 115 116 for_each_phy(enabled_mask, enabled_mask, i) { 117 if (&asd_ha->phys[i] == phy) 118 return k; 119 k++; 120 } 121 return 0; 122 } 123 124 /** 125 * asd_get_attached_sas_addr -- extract/generate attached SAS address 126 * @phy: pointer to asd_phy 127 * @sas_addr: pointer to buffer where the SAS address is to be written 128 * 129 * This function extracts the SAS address from an IDENTIFY frame 130 * received. If OOB is SATA, then a SAS address is generated from the 131 * HA tables. 132 * 133 * LOCKING: the frame_rcvd_lock needs to be held since this parses the frame 134 * buffer. 135 */ 136 static void asd_get_attached_sas_addr(struct asd_phy *phy, u8 *sas_addr) 137 { 138 if (phy->sas_phy.frame_rcvd[0] == 0x34 139 && phy->sas_phy.oob_mode == SATA_OOB_MODE) { 140 struct asd_ha_struct *asd_ha = phy->sas_phy.ha->lldd_ha; 141 /* FIS device-to-host */ 142 u64 addr = be64_to_cpu(*(__be64 *)phy->phy_desc->sas_addr); 143 144 addr += asd_ha->hw_prof.sata_name_base + ord_phy(asd_ha, phy); 145 *(__be64 *)sas_addr = cpu_to_be64(addr); 146 } else { 147 struct sas_identify_frame *idframe = 148 (void *) phy->sas_phy.frame_rcvd; 149 memcpy(sas_addr, idframe->sas_addr, SAS_ADDR_SIZE); 150 } 151 } 152 153 static void asd_form_port(struct asd_ha_struct *asd_ha, struct asd_phy *phy) 154 { 155 int i; 156 struct asd_port *free_port = NULL; 157 struct asd_port *port; 158 struct asd_sas_phy *sas_phy = &phy->sas_phy; 159 unsigned long flags; 160 161 spin_lock_irqsave(&asd_ha->asd_ports_lock, flags); 162 if (!phy->asd_port) { 163 for (i = 0; i < ASD_MAX_PHYS; i++) { 164 port = &asd_ha->asd_ports[i]; 165 166 /* Check for wide port */ 167 if (port->num_phys > 0 && 168 memcmp(port->sas_addr, sas_phy->sas_addr, 169 SAS_ADDR_SIZE) == 0 && 170 memcmp(port->attached_sas_addr, 171 sas_phy->attached_sas_addr, 172 SAS_ADDR_SIZE) == 0) { 173 break; 174 } 175 176 /* Find a free port */ 177 if (port->num_phys == 0 && free_port == NULL) { 178 free_port = port; 179 } 180 } 181 182 /* Use a free port if this doesn't form a wide port */ 183 if (i >= ASD_MAX_PHYS) { 184 port = free_port; 185 BUG_ON(!port); 186 memcpy(port->sas_addr, sas_phy->sas_addr, 187 SAS_ADDR_SIZE); 188 memcpy(port->attached_sas_addr, 189 sas_phy->attached_sas_addr, 190 SAS_ADDR_SIZE); 191 } 192 port->num_phys++; 193 port->phy_mask |= (1U << sas_phy->id); 194 phy->asd_port = port; 195 } 196 ASD_DPRINTK("%s: updating phy_mask 0x%x for phy%d\n", 197 __func__, phy->asd_port->phy_mask, sas_phy->id); 198 asd_update_port_links(asd_ha, phy); 199 spin_unlock_irqrestore(&asd_ha->asd_ports_lock, flags); 200 } 201 202 static void asd_deform_port(struct asd_ha_struct *asd_ha, struct asd_phy *phy) 203 { 204 struct asd_port *port = phy->asd_port; 205 struct asd_sas_phy *sas_phy = &phy->sas_phy; 206 unsigned long flags; 207 208 spin_lock_irqsave(&asd_ha->asd_ports_lock, flags); 209 if (port) { 210 port->num_phys--; 211 port->phy_mask &= ~(1U << sas_phy->id); 212 phy->asd_port = NULL; 213 } 214 spin_unlock_irqrestore(&asd_ha->asd_ports_lock, flags); 215 } 216 217 static void asd_bytes_dmaed_tasklet(struct asd_ascb *ascb, 218 struct done_list_struct *dl, 219 int edb_id, int phy_id) 220 { 221 unsigned long flags; 222 int edb_el = edb_id + ascb->edb_index; 223 struct asd_dma_tok *edb = ascb->ha->seq.edb_arr[edb_el]; 224 struct asd_phy *phy = &ascb->ha->phys[phy_id]; 225 struct sas_ha_struct *sas_ha = phy->sas_phy.ha; 226 u16 size = ((dl->status_block[3] & 7) << 8) | dl->status_block[2]; 227 228 size = min(size, (u16) sizeof(phy->frame_rcvd)); 229 230 spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags); 231 memcpy(phy->sas_phy.frame_rcvd, edb->vaddr, size); 232 phy->sas_phy.frame_rcvd_size = size; 233 asd_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr); 234 spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags); 235 asd_dump_frame_rcvd(phy, dl); 236 asd_form_port(ascb->ha, phy); 237 sas_ha->notify_port_event(&phy->sas_phy, PORTE_BYTES_DMAED); 238 } 239 240 static void asd_link_reset_err_tasklet(struct asd_ascb *ascb, 241 struct done_list_struct *dl, 242 int phy_id) 243 { 244 struct asd_ha_struct *asd_ha = ascb->ha; 245 struct sas_ha_struct *sas_ha = &asd_ha->sas_ha; 246 struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id]; 247 struct asd_phy *phy = &asd_ha->phys[phy_id]; 248 u8 lr_error = dl->status_block[1]; 249 u8 retries_left = dl->status_block[2]; 250 251 switch (lr_error) { 252 case 0: 253 ASD_DPRINTK("phy%d: Receive ID timer expired\n", phy_id); 254 break; 255 case 1: 256 ASD_DPRINTK("phy%d: Loss of signal\n", phy_id); 257 break; 258 case 2: 259 ASD_DPRINTK("phy%d: Loss of dword sync\n", phy_id); 260 break; 261 case 3: 262 ASD_DPRINTK("phy%d: Receive FIS timeout\n", phy_id); 263 break; 264 default: 265 ASD_DPRINTK("phy%d: unknown link reset error code: 0x%x\n", 266 phy_id, lr_error); 267 break; 268 } 269 270 asd_turn_led(asd_ha, phy_id, 0); 271 sas_phy_disconnected(sas_phy); 272 asd_deform_port(asd_ha, phy); 273 sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR); 274 275 if (retries_left == 0) { 276 int num = 1; 277 struct asd_ascb *cp = asd_ascb_alloc_list(ascb->ha, &num, 278 GFP_ATOMIC); 279 if (!cp) { 280 asd_printk("%s: out of memory\n", __func__); 281 goto out; 282 } 283 ASD_DPRINTK("phy%d: retries:0 performing link reset seq\n", 284 phy_id); 285 asd_build_control_phy(cp, phy_id, ENABLE_PHY); 286 if (asd_post_ascb_list(ascb->ha, cp, 1) != 0) 287 asd_ascb_free(cp); 288 } 289 out: 290 ; 291 } 292 293 static void asd_primitive_rcvd_tasklet(struct asd_ascb *ascb, 294 struct done_list_struct *dl, 295 int phy_id) 296 { 297 unsigned long flags; 298 struct sas_ha_struct *sas_ha = &ascb->ha->sas_ha; 299 struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id]; 300 struct asd_ha_struct *asd_ha = ascb->ha; 301 struct asd_phy *phy = &asd_ha->phys[phy_id]; 302 u8 reg = dl->status_block[1]; 303 u32 cont = dl->status_block[2] << ((reg & 3)*8); 304 305 reg &= ~3; 306 switch (reg) { 307 case LmPRMSTAT0BYTE0: 308 switch (cont) { 309 case LmBROADCH: 310 case LmBROADRVCH0: 311 case LmBROADRVCH1: 312 case LmBROADSES: 313 ASD_DPRINTK("phy%d: BROADCAST change received:%d\n", 314 phy_id, cont); 315 spin_lock_irqsave(&sas_phy->sas_prim_lock, flags); 316 sas_phy->sas_prim = ffs(cont); 317 spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags); 318 sas_ha->notify_port_event(sas_phy,PORTE_BROADCAST_RCVD); 319 break; 320 321 case LmUNKNOWNP: 322 ASD_DPRINTK("phy%d: unknown BREAK\n", phy_id); 323 break; 324 325 default: 326 ASD_DPRINTK("phy%d: primitive reg:0x%x, cont:0x%04x\n", 327 phy_id, reg, cont); 328 break; 329 } 330 break; 331 case LmPRMSTAT1BYTE0: 332 switch (cont) { 333 case LmHARDRST: 334 ASD_DPRINTK("phy%d: HARD_RESET primitive rcvd\n", 335 phy_id); 336 /* The sequencer disables all phys on that port. 337 * We have to re-enable the phys ourselves. */ 338 asd_deform_port(asd_ha, phy); 339 sas_ha->notify_port_event(sas_phy, PORTE_HARD_RESET); 340 break; 341 342 default: 343 ASD_DPRINTK("phy%d: primitive reg:0x%x, cont:0x%04x\n", 344 phy_id, reg, cont); 345 break; 346 } 347 break; 348 default: 349 ASD_DPRINTK("unknown primitive register:0x%x\n", 350 dl->status_block[1]); 351 break; 352 } 353 } 354 355 /** 356 * asd_invalidate_edb -- invalidate an EDB and if necessary post the ESCB 357 * @ascb: pointer to Empty SCB 358 * @edb_id: index [0,6] to the empty data buffer which is to be invalidated 359 * 360 * After an EDB has been invalidated, if all EDBs in this ESCB have been 361 * invalidated, the ESCB is posted back to the sequencer. 362 * Context is tasklet/IRQ. 363 */ 364 void asd_invalidate_edb(struct asd_ascb *ascb, int edb_id) 365 { 366 struct asd_seq_data *seq = &ascb->ha->seq; 367 struct empty_scb *escb = &ascb->scb->escb; 368 struct sg_el *eb = &escb->eb[edb_id]; 369 struct asd_dma_tok *edb = seq->edb_arr[ascb->edb_index + edb_id]; 370 371 memset(edb->vaddr, 0, ASD_EDB_SIZE); 372 eb->flags |= ELEMENT_NOT_VALID; 373 escb->num_valid--; 374 375 if (escb->num_valid == 0) { 376 int i; 377 /* ASD_DPRINTK("reposting escb: vaddr: 0x%p, " 378 "dma_handle: 0x%08llx, next: 0x%08llx, " 379 "index:%d, opcode:0x%02x\n", 380 ascb->dma_scb.vaddr, 381 (u64)ascb->dma_scb.dma_handle, 382 le64_to_cpu(ascb->scb->header.next_scb), 383 le16_to_cpu(ascb->scb->header.index), 384 ascb->scb->header.opcode); 385 */ 386 escb->num_valid = ASD_EDBS_PER_SCB; 387 for (i = 0; i < ASD_EDBS_PER_SCB; i++) 388 escb->eb[i].flags = 0; 389 if (!list_empty(&ascb->list)) 390 list_del_init(&ascb->list); 391 i = asd_post_escb_list(ascb->ha, ascb, 1); 392 if (i) 393 asd_printk("couldn't post escb, err:%d\n", i); 394 } 395 } 396 397 static void escb_tasklet_complete(struct asd_ascb *ascb, 398 struct done_list_struct *dl) 399 { 400 struct asd_ha_struct *asd_ha = ascb->ha; 401 struct sas_ha_struct *sas_ha = &asd_ha->sas_ha; 402 int edb = (dl->opcode & DL_PHY_MASK) - 1; /* [0xc1,0xc7] -> [0,6] */ 403 u8 sb_opcode = dl->status_block[0]; 404 int phy_id = sb_opcode & DL_PHY_MASK; 405 struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id]; 406 struct asd_phy *phy = &asd_ha->phys[phy_id]; 407 408 if (edb > 6 || edb < 0) { 409 ASD_DPRINTK("edb is 0x%x! dl->opcode is 0x%x\n", 410 edb, dl->opcode); 411 ASD_DPRINTK("sb_opcode : 0x%x, phy_id: 0x%x\n", 412 sb_opcode, phy_id); 413 ASD_DPRINTK("escb: vaddr: 0x%p, " 414 "dma_handle: 0x%llx, next: 0x%llx, " 415 "index:%d, opcode:0x%02x\n", 416 ascb->dma_scb.vaddr, 417 (unsigned long long)ascb->dma_scb.dma_handle, 418 (unsigned long long) 419 le64_to_cpu(ascb->scb->header.next_scb), 420 le16_to_cpu(ascb->scb->header.index), 421 ascb->scb->header.opcode); 422 } 423 424 /* Catch these before we mask off the sb_opcode bits */ 425 switch (sb_opcode) { 426 case REQ_TASK_ABORT: { 427 struct asd_ascb *a, *b; 428 u16 tc_abort; 429 struct domain_device *failed_dev = NULL; 430 431 ASD_DPRINTK("%s: REQ_TASK_ABORT, reason=0x%X\n", 432 __func__, dl->status_block[3]); 433 434 /* 435 * Find the task that caused the abort and abort it first. 436 * The sequencer won't put anything on the done list until 437 * that happens. 438 */ 439 tc_abort = *((u16*)(&dl->status_block[1])); 440 tc_abort = le16_to_cpu(tc_abort); 441 442 list_for_each_entry_safe(a, b, &asd_ha->seq.pend_q, list) { 443 struct sas_task *task = a->uldd_task; 444 445 if (a->tc_index != tc_abort) 446 continue; 447 448 if (task) { 449 failed_dev = task->dev; 450 sas_task_abort(task); 451 } else { 452 ASD_DPRINTK("R_T_A for non TASK scb 0x%x\n", 453 a->scb->header.opcode); 454 } 455 break; 456 } 457 458 if (!failed_dev) { 459 ASD_DPRINTK("%s: Can't find task (tc=%d) to abort!\n", 460 __func__, tc_abort); 461 goto out; 462 } 463 464 /* 465 * Now abort everything else for that device (hba?) so 466 * that the EH will wake up and do something. 467 */ 468 list_for_each_entry_safe(a, b, &asd_ha->seq.pend_q, list) { 469 struct sas_task *task = a->uldd_task; 470 471 if (task && 472 task->dev == failed_dev && 473 a->tc_index != tc_abort) 474 sas_task_abort(task); 475 } 476 477 goto out; 478 } 479 case REQ_DEVICE_RESET: { 480 struct asd_ascb *a; 481 u16 conn_handle; 482 unsigned long flags; 483 struct sas_task *last_dev_task = NULL; 484 485 conn_handle = *((u16*)(&dl->status_block[1])); 486 conn_handle = le16_to_cpu(conn_handle); 487 488 ASD_DPRINTK("%s: REQ_DEVICE_RESET, reason=0x%X\n", __func__, 489 dl->status_block[3]); 490 491 /* Find the last pending task for the device... */ 492 list_for_each_entry(a, &asd_ha->seq.pend_q, list) { 493 u16 x; 494 struct domain_device *dev; 495 struct sas_task *task = a->uldd_task; 496 497 if (!task) 498 continue; 499 dev = task->dev; 500 501 x = (unsigned long)dev->lldd_dev; 502 if (x == conn_handle) 503 last_dev_task = task; 504 } 505 506 if (!last_dev_task) { 507 ASD_DPRINTK("%s: Device reset for idle device %d?\n", 508 __func__, conn_handle); 509 goto out; 510 } 511 512 /* ...and set the reset flag */ 513 spin_lock_irqsave(&last_dev_task->task_state_lock, flags); 514 last_dev_task->task_state_flags |= SAS_TASK_NEED_DEV_RESET; 515 spin_unlock_irqrestore(&last_dev_task->task_state_lock, flags); 516 517 /* Kill all pending tasks for the device */ 518 list_for_each_entry(a, &asd_ha->seq.pend_q, list) { 519 u16 x; 520 struct domain_device *dev; 521 struct sas_task *task = a->uldd_task; 522 523 if (!task) 524 continue; 525 dev = task->dev; 526 527 x = (unsigned long)dev->lldd_dev; 528 if (x == conn_handle) 529 sas_task_abort(task); 530 } 531 532 goto out; 533 } 534 case SIGNAL_NCQ_ERROR: 535 ASD_DPRINTK("%s: SIGNAL_NCQ_ERROR\n", __func__); 536 goto out; 537 case CLEAR_NCQ_ERROR: 538 ASD_DPRINTK("%s: CLEAR_NCQ_ERROR\n", __func__); 539 goto out; 540 } 541 542 sb_opcode &= ~DL_PHY_MASK; 543 544 switch (sb_opcode) { 545 case BYTES_DMAED: 546 ASD_DPRINTK("%s: phy%d: BYTES_DMAED\n", __func__, phy_id); 547 asd_bytes_dmaed_tasklet(ascb, dl, edb, phy_id); 548 break; 549 case PRIMITIVE_RECVD: 550 ASD_DPRINTK("%s: phy%d: PRIMITIVE_RECVD\n", __func__, 551 phy_id); 552 asd_primitive_rcvd_tasklet(ascb, dl, phy_id); 553 break; 554 case PHY_EVENT: 555 ASD_DPRINTK("%s: phy%d: PHY_EVENT\n", __func__, phy_id); 556 asd_phy_event_tasklet(ascb, dl); 557 break; 558 case LINK_RESET_ERROR: 559 ASD_DPRINTK("%s: phy%d: LINK_RESET_ERROR\n", __func__, 560 phy_id); 561 asd_link_reset_err_tasklet(ascb, dl, phy_id); 562 break; 563 case TIMER_EVENT: 564 ASD_DPRINTK("%s: phy%d: TIMER_EVENT, lost dw sync\n", 565 __func__, phy_id); 566 asd_turn_led(asd_ha, phy_id, 0); 567 /* the device is gone */ 568 sas_phy_disconnected(sas_phy); 569 asd_deform_port(asd_ha, phy); 570 sas_ha->notify_port_event(sas_phy, PORTE_TIMER_EVENT); 571 break; 572 default: 573 ASD_DPRINTK("%s: phy%d: unknown event:0x%x\n", __func__, 574 phy_id, sb_opcode); 575 ASD_DPRINTK("edb is 0x%x! dl->opcode is 0x%x\n", 576 edb, dl->opcode); 577 ASD_DPRINTK("sb_opcode : 0x%x, phy_id: 0x%x\n", 578 sb_opcode, phy_id); 579 ASD_DPRINTK("escb: vaddr: 0x%p, " 580 "dma_handle: 0x%llx, next: 0x%llx, " 581 "index:%d, opcode:0x%02x\n", 582 ascb->dma_scb.vaddr, 583 (unsigned long long)ascb->dma_scb.dma_handle, 584 (unsigned long long) 585 le64_to_cpu(ascb->scb->header.next_scb), 586 le16_to_cpu(ascb->scb->header.index), 587 ascb->scb->header.opcode); 588 589 break; 590 } 591 out: 592 asd_invalidate_edb(ascb, edb); 593 } 594 595 int asd_init_post_escbs(struct asd_ha_struct *asd_ha) 596 { 597 struct asd_seq_data *seq = &asd_ha->seq; 598 int i; 599 600 for (i = 0; i < seq->num_escbs; i++) 601 seq->escb_arr[i]->tasklet_complete = escb_tasklet_complete; 602 603 ASD_DPRINTK("posting %d escbs\n", i); 604 return asd_post_escb_list(asd_ha, seq->escb_arr[0], seq->num_escbs); 605 } 606 607 /* ---------- CONTROL PHY ---------- */ 608 609 #define CONTROL_PHY_STATUS (CURRENT_DEVICE_PRESENT | CURRENT_OOB_DONE \ 610 | CURRENT_SPINUP_HOLD | CURRENT_GTO_TIMEOUT \ 611 | CURRENT_OOB_ERROR) 612 613 /** 614 * control_phy_tasklet_complete -- tasklet complete for CONTROL PHY ascb 615 * @ascb: pointer to an ascb 616 * @dl: pointer to the done list entry 617 * 618 * This function completes a CONTROL PHY scb and frees the ascb. 619 * A note on LEDs: 620 * - an LED blinks if there is IO though it, 621 * - if a device is connected to the LED, it is lit, 622 * - if no device is connected to the LED, is is dimmed (off). 623 */ 624 static void control_phy_tasklet_complete(struct asd_ascb *ascb, 625 struct done_list_struct *dl) 626 { 627 struct asd_ha_struct *asd_ha = ascb->ha; 628 struct scb *scb = ascb->scb; 629 struct control_phy *control_phy = &scb->control_phy; 630 u8 phy_id = control_phy->phy_id; 631 struct asd_phy *phy = &ascb->ha->phys[phy_id]; 632 633 u8 status = dl->status_block[0]; 634 u8 oob_status = dl->status_block[1]; 635 u8 oob_mode = dl->status_block[2]; 636 /* u8 oob_signals= dl->status_block[3]; */ 637 638 if (status != 0) { 639 ASD_DPRINTK("%s: phy%d status block opcode:0x%x\n", 640 __func__, phy_id, status); 641 goto out; 642 } 643 644 switch (control_phy->sub_func) { 645 case DISABLE_PHY: 646 asd_ha->hw_prof.enabled_phys &= ~(1 << phy_id); 647 asd_turn_led(asd_ha, phy_id, 0); 648 asd_control_led(asd_ha, phy_id, 0); 649 ASD_DPRINTK("%s: disable phy%d\n", __func__, phy_id); 650 break; 651 652 case ENABLE_PHY: 653 asd_control_led(asd_ha, phy_id, 1); 654 if (oob_status & CURRENT_OOB_DONE) { 655 asd_ha->hw_prof.enabled_phys |= (1 << phy_id); 656 get_lrate_mode(phy, oob_mode); 657 asd_turn_led(asd_ha, phy_id, 1); 658 ASD_DPRINTK("%s: phy%d, lrate:0x%x, proto:0x%x\n", 659 __func__, phy_id,phy->sas_phy.linkrate, 660 phy->sas_phy.iproto); 661 } else if (oob_status & CURRENT_SPINUP_HOLD) { 662 asd_ha->hw_prof.enabled_phys |= (1 << phy_id); 663 asd_turn_led(asd_ha, phy_id, 1); 664 ASD_DPRINTK("%s: phy%d, spinup hold\n", __func__, 665 phy_id); 666 } else if (oob_status & CURRENT_ERR_MASK) { 667 asd_turn_led(asd_ha, phy_id, 0); 668 ASD_DPRINTK("%s: phy%d: error: oob status:0x%02x\n", 669 __func__, phy_id, oob_status); 670 } else if (oob_status & (CURRENT_HOT_PLUG_CNCT 671 | CURRENT_DEVICE_PRESENT)) { 672 asd_ha->hw_prof.enabled_phys |= (1 << phy_id); 673 asd_turn_led(asd_ha, phy_id, 1); 674 ASD_DPRINTK("%s: phy%d: hot plug or device present\n", 675 __func__, phy_id); 676 } else { 677 asd_ha->hw_prof.enabled_phys |= (1 << phy_id); 678 asd_turn_led(asd_ha, phy_id, 0); 679 ASD_DPRINTK("%s: phy%d: no device present: " 680 "oob_status:0x%x\n", 681 __func__, phy_id, oob_status); 682 } 683 break; 684 case RELEASE_SPINUP_HOLD: 685 case PHY_NO_OP: 686 case EXECUTE_HARD_RESET: 687 ASD_DPRINTK("%s: phy%d: sub_func:0x%x\n", __func__, 688 phy_id, control_phy->sub_func); 689 /* XXX finish */ 690 break; 691 default: 692 ASD_DPRINTK("%s: phy%d: sub_func:0x%x?\n", __func__, 693 phy_id, control_phy->sub_func); 694 break; 695 } 696 out: 697 asd_ascb_free(ascb); 698 } 699 700 static void set_speed_mask(u8 *speed_mask, struct asd_phy_desc *pd) 701 { 702 /* disable all speeds, then enable defaults */ 703 *speed_mask = SAS_SPEED_60_DIS | SAS_SPEED_30_DIS | SAS_SPEED_15_DIS 704 | SATA_SPEED_30_DIS | SATA_SPEED_15_DIS; 705 706 switch (pd->max_sas_lrate) { 707 case SAS_LINK_RATE_6_0_GBPS: 708 *speed_mask &= ~SAS_SPEED_60_DIS; 709 /* fall through*/ 710 default: 711 case SAS_LINK_RATE_3_0_GBPS: 712 *speed_mask &= ~SAS_SPEED_30_DIS; 713 /* fall through*/ 714 case SAS_LINK_RATE_1_5_GBPS: 715 *speed_mask &= ~SAS_SPEED_15_DIS; 716 } 717 718 switch (pd->min_sas_lrate) { 719 case SAS_LINK_RATE_6_0_GBPS: 720 *speed_mask |= SAS_SPEED_30_DIS; 721 /* fall through*/ 722 case SAS_LINK_RATE_3_0_GBPS: 723 *speed_mask |= SAS_SPEED_15_DIS; 724 default: 725 case SAS_LINK_RATE_1_5_GBPS: 726 /* nothing to do */ 727 ; 728 } 729 730 switch (pd->max_sata_lrate) { 731 case SAS_LINK_RATE_3_0_GBPS: 732 *speed_mask &= ~SATA_SPEED_30_DIS; 733 /* fall through*/ 734 default: 735 case SAS_LINK_RATE_1_5_GBPS: 736 *speed_mask &= ~SATA_SPEED_15_DIS; 737 } 738 739 switch (pd->min_sata_lrate) { 740 case SAS_LINK_RATE_3_0_GBPS: 741 *speed_mask |= SATA_SPEED_15_DIS; 742 default: 743 case SAS_LINK_RATE_1_5_GBPS: 744 /* nothing to do */ 745 ; 746 } 747 } 748 749 /** 750 * asd_build_control_phy -- build a CONTROL PHY SCB 751 * @ascb: pointer to an ascb 752 * @phy_id: phy id to control, integer 753 * @subfunc: subfunction, what to actually to do the phy 754 * 755 * This function builds a CONTROL PHY scb. No allocation of any kind 756 * is performed. @ascb is allocated with the list function. 757 * The caller can override the ascb->tasklet_complete to point 758 * to its own callback function. It must call asd_ascb_free() 759 * at its tasklet complete function. 760 * See the default implementation. 761 */ 762 void asd_build_control_phy(struct asd_ascb *ascb, int phy_id, u8 subfunc) 763 { 764 struct asd_phy *phy = &ascb->ha->phys[phy_id]; 765 struct scb *scb = ascb->scb; 766 struct control_phy *control_phy = &scb->control_phy; 767 768 scb->header.opcode = CONTROL_PHY; 769 control_phy->phy_id = (u8) phy_id; 770 control_phy->sub_func = subfunc; 771 772 switch (subfunc) { 773 case EXECUTE_HARD_RESET: /* 0x81 */ 774 case ENABLE_PHY: /* 0x01 */ 775 /* decide hot plug delay */ 776 control_phy->hot_plug_delay = HOTPLUG_DELAY_TIMEOUT; 777 778 /* decide speed mask */ 779 set_speed_mask(&control_phy->speed_mask, phy->phy_desc); 780 781 /* initiator port settings are in the hi nibble */ 782 if (phy->sas_phy.role == PHY_ROLE_INITIATOR) 783 control_phy->port_type = SAS_PROTOCOL_ALL << 4; 784 else if (phy->sas_phy.role == PHY_ROLE_TARGET) 785 control_phy->port_type = SAS_PROTOCOL_ALL; 786 else 787 control_phy->port_type = 788 (SAS_PROTOCOL_ALL << 4) | SAS_PROTOCOL_ALL; 789 790 /* link reset retries, this should be nominal */ 791 control_phy->link_reset_retries = 10; 792 /* fall through */ 793 794 case RELEASE_SPINUP_HOLD: /* 0x02 */ 795 /* decide the func_mask */ 796 control_phy->func_mask = FUNCTION_MASK_DEFAULT; 797 if (phy->phy_desc->flags & ASD_SATA_SPINUP_HOLD) 798 control_phy->func_mask &= ~SPINUP_HOLD_DIS; 799 else 800 control_phy->func_mask |= SPINUP_HOLD_DIS; 801 } 802 803 control_phy->conn_handle = cpu_to_le16(0xFFFF); 804 805 ascb->tasklet_complete = control_phy_tasklet_complete; 806 } 807 808 /* ---------- INITIATE LINK ADM TASK ---------- */ 809 810 #if 0 811 812 static void link_adm_tasklet_complete(struct asd_ascb *ascb, 813 struct done_list_struct *dl) 814 { 815 u8 opcode = dl->opcode; 816 struct initiate_link_adm *link_adm = &ascb->scb->link_adm; 817 u8 phy_id = link_adm->phy_id; 818 819 if (opcode != TC_NO_ERROR) { 820 asd_printk("phy%d: link adm task 0x%x completed with error " 821 "0x%x\n", phy_id, link_adm->sub_func, opcode); 822 } 823 ASD_DPRINTK("phy%d: link adm task 0x%x: 0x%x\n", 824 phy_id, link_adm->sub_func, opcode); 825 826 asd_ascb_free(ascb); 827 } 828 829 void asd_build_initiate_link_adm_task(struct asd_ascb *ascb, int phy_id, 830 u8 subfunc) 831 { 832 struct scb *scb = ascb->scb; 833 struct initiate_link_adm *link_adm = &scb->link_adm; 834 835 scb->header.opcode = INITIATE_LINK_ADM_TASK; 836 837 link_adm->phy_id = phy_id; 838 link_adm->sub_func = subfunc; 839 link_adm->conn_handle = cpu_to_le16(0xFFFF); 840 841 ascb->tasklet_complete = link_adm_tasklet_complete; 842 } 843 844 #endif /* 0 */ 845 846 /* ---------- SCB timer ---------- */ 847 848 /** 849 * asd_ascb_timedout -- called when a pending SCB's timer has expired 850 * @t: Timer context used to fetch the SCB 851 * 852 * This is the default timeout function which does the most necessary. 853 * Upper layers can implement their own timeout function, say to free 854 * resources they have with this SCB, and then call this one at the 855 * end of their timeout function. To do this, one should initialize 856 * the ascb->timer.{function, expires} prior to calling the post 857 * function. The timer is started by the post function. 858 */ 859 void asd_ascb_timedout(struct timer_list *t) 860 { 861 struct asd_ascb *ascb = from_timer(ascb, t, timer); 862 struct asd_seq_data *seq = &ascb->ha->seq; 863 unsigned long flags; 864 865 ASD_DPRINTK("scb:0x%x timed out\n", ascb->scb->header.opcode); 866 867 spin_lock_irqsave(&seq->pend_q_lock, flags); 868 seq->pending--; 869 list_del_init(&ascb->list); 870 spin_unlock_irqrestore(&seq->pend_q_lock, flags); 871 872 asd_ascb_free(ascb); 873 } 874 875 /* ---------- CONTROL PHY ---------- */ 876 877 /* Given the spec value, return a driver value. */ 878 static const int phy_func_table[] = { 879 [PHY_FUNC_NOP] = PHY_NO_OP, 880 [PHY_FUNC_LINK_RESET] = ENABLE_PHY, 881 [PHY_FUNC_HARD_RESET] = EXECUTE_HARD_RESET, 882 [PHY_FUNC_DISABLE] = DISABLE_PHY, 883 [PHY_FUNC_RELEASE_SPINUP_HOLD] = RELEASE_SPINUP_HOLD, 884 }; 885 886 int asd_control_phy(struct asd_sas_phy *phy, enum phy_func func, void *arg) 887 { 888 struct asd_ha_struct *asd_ha = phy->ha->lldd_ha; 889 struct asd_phy_desc *pd = asd_ha->phys[phy->id].phy_desc; 890 struct asd_ascb *ascb; 891 struct sas_phy_linkrates *rates; 892 int res = 1; 893 894 switch (func) { 895 case PHY_FUNC_CLEAR_ERROR_LOG: 896 case PHY_FUNC_GET_EVENTS: 897 return -ENOSYS; 898 case PHY_FUNC_SET_LINK_RATE: 899 rates = arg; 900 if (rates->minimum_linkrate) { 901 pd->min_sas_lrate = rates->minimum_linkrate; 902 pd->min_sata_lrate = rates->minimum_linkrate; 903 } 904 if (rates->maximum_linkrate) { 905 pd->max_sas_lrate = rates->maximum_linkrate; 906 pd->max_sata_lrate = rates->maximum_linkrate; 907 } 908 func = PHY_FUNC_LINK_RESET; 909 break; 910 default: 911 break; 912 } 913 914 ascb = asd_ascb_alloc_list(asd_ha, &res, GFP_KERNEL); 915 if (!ascb) 916 return -ENOMEM; 917 918 asd_build_control_phy(ascb, phy->id, phy_func_table[func]); 919 res = asd_post_ascb_list(asd_ha, ascb , 1); 920 if (res) 921 asd_ascb_free(ascb); 922 923 return res; 924 } 925