1 /* 2 * Aic7xxx SCSI host adapter firmware assembler 3 * 4 * Copyright (c) 1997, 1998, 2000, 2001 Justin T. Gibbs. 5 * Copyright (c) 2001, 2002 Adaptec Inc. 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions, and the following disclaimer, 13 * without modification. 14 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 15 * substantially similar to the "NO WARRANTY" disclaimer below 16 * ("Disclaimer") and any redistribution must be conditioned upon 17 * including a substantially similar Disclaimer requirement for further 18 * binary redistribution. 19 * 3. Neither the names of the above-listed copyright holders nor the names 20 * of any contributors may be used to endorse or promote products derived 21 * from this software without specific prior written permission. 22 * 23 * Alternatively, this software may be distributed under the terms of the 24 * GNU General Public License ("GPL") version 2 as published by the Free 25 * Software Foundation. 26 * 27 * NO WARRANTY 28 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 29 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 30 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 31 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 32 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 33 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 34 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 35 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 36 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 37 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 38 * POSSIBILITY OF SUCH DAMAGES. 39 * 40 * $Id: //depot/aic7xxx/aic7xxx/aicasm/aicasm.c#23 $ 41 * 42 * $FreeBSD$ 43 */ 44 #include <sys/types.h> 45 #include <sys/mman.h> 46 47 #include <ctype.h> 48 #include <inttypes.h> 49 #include <regex.h> 50 #include <stdio.h> 51 #include <stdlib.h> 52 #include <string.h> 53 #include <sysexits.h> 54 #include <unistd.h> 55 56 #if linux 57 #include <endian.h> 58 #else 59 #include <machine/endian.h> 60 #endif 61 62 #include "aicasm.h" 63 #include "aicasm_symbol.h" 64 #include "aicasm_insformat.h" 65 66 typedef struct patch { 67 STAILQ_ENTRY(patch) links; 68 int patch_func; 69 u_int begin; 70 u_int skip_instr; 71 u_int skip_patch; 72 } patch_t; 73 74 STAILQ_HEAD(patch_list, patch) patches; 75 76 static void usage(void); 77 static void back_patch(void); 78 static void output_code(void); 79 static void output_listing(char *ifilename); 80 static void dump_scope(scope_t *scope); 81 static void emit_patch(scope_t *scope, int patch); 82 static int check_patch(patch_t **start_patch, int start_instr, 83 int *skip_addr, int *func_vals); 84 85 struct path_list search_path; 86 int includes_search_curdir; 87 char *appname; 88 char *stock_include_file; 89 FILE *ofile; 90 char *ofilename; 91 char *regfilename; 92 FILE *regfile; 93 char *listfilename; 94 FILE *listfile; 95 char *regdiagfilename; 96 FILE *regdiagfile; 97 int src_mode; 98 int dst_mode; 99 100 static STAILQ_HEAD(,instruction) seq_program; 101 struct cs_tailq cs_tailq; 102 struct scope_list scope_stack; 103 symlist_t patch_functions; 104 105 #if DEBUG 106 extern int yy_flex_debug; 107 extern int mm_flex_debug; 108 extern int yydebug; 109 extern int mmdebug; 110 #endif 111 extern FILE *yyin; 112 extern int yyparse(void); 113 114 int main(int argc, char *argv[]); 115 116 int 117 main(int argc, char *argv[]) 118 { 119 extern char *optarg; 120 extern int optind; 121 int ch; 122 int retval; 123 char *inputfilename; 124 scope_t *sentinal; 125 126 STAILQ_INIT(&patches); 127 SLIST_INIT(&search_path); 128 STAILQ_INIT(&seq_program); 129 TAILQ_INIT(&cs_tailq); 130 SLIST_INIT(&scope_stack); 131 132 /* Set Sentinal scope node */ 133 sentinal = scope_alloc(); 134 sentinal->type = SCOPE_ROOT; 135 136 includes_search_curdir = 1; 137 appname = *argv; 138 regfile = NULL; 139 listfile = NULL; 140 #if DEBUG 141 yy_flex_debug = 0; 142 mm_flex_debug = 0; 143 yydebug = 0; 144 mmdebug = 0; 145 #endif 146 while ((ch = getopt(argc, argv, "d:i:l:n:o:p:r:I:")) != -1) { 147 switch(ch) { 148 case 'd': 149 #if DEBUG 150 if (strcmp(optarg, "s") == 0) { 151 yy_flex_debug = 1; 152 mm_flex_debug = 1; 153 } else if (strcmp(optarg, "p") == 0) { 154 yydebug = 1; 155 mmdebug = 1; 156 } else { 157 fprintf(stderr, "%s: -d Requires either an " 158 "'s' or 'p' argument\n", appname); 159 usage(); 160 } 161 #else 162 stop("-d: Assembler not built with debugging " 163 "information", EX_SOFTWARE); 164 #endif 165 break; 166 case 'i': 167 stock_include_file = optarg; 168 break; 169 case 'l': 170 /* Create a program listing */ 171 if ((listfile = fopen(optarg, "w")) == NULL) { 172 perror(optarg); 173 stop(NULL, EX_CANTCREAT); 174 } 175 listfilename = optarg; 176 break; 177 case 'n': 178 /* Don't complain about the -nostdinc directrive */ 179 if (strcmp(optarg, "ostdinc")) { 180 fprintf(stderr, "%s: Unknown option -%c%s\n", 181 appname, ch, optarg); 182 usage(); 183 /* NOTREACHED */ 184 } 185 break; 186 case 'o': 187 if ((ofile = fopen(optarg, "w")) == NULL) { 188 perror(optarg); 189 stop(NULL, EX_CANTCREAT); 190 } 191 ofilename = optarg; 192 break; 193 case 'p': 194 /* Create Register Diagnostic "printing" Functions */ 195 if ((regdiagfile = fopen(optarg, "w")) == NULL) { 196 perror(optarg); 197 stop(NULL, EX_CANTCREAT); 198 } 199 regdiagfilename = optarg; 200 break; 201 case 'r': 202 if ((regfile = fopen(optarg, "w")) == NULL) { 203 perror(optarg); 204 stop(NULL, EX_CANTCREAT); 205 } 206 regfilename = optarg; 207 break; 208 case 'I': 209 { 210 path_entry_t include_dir; 211 212 if (strcmp(optarg, "-") == 0) { 213 if (includes_search_curdir == 0) { 214 fprintf(stderr, "%s: Warning - '-I-' " 215 "specified multiple " 216 "times\n", appname); 217 } 218 includes_search_curdir = 0; 219 for (include_dir = SLIST_FIRST(&search_path); 220 include_dir != NULL; 221 include_dir = SLIST_NEXT(include_dir, 222 links)) 223 /* 224 * All entries before a '-I-' only 225 * apply to includes specified with 226 * quotes instead of "<>". 227 */ 228 include_dir->quoted_includes_only = 1; 229 } else { 230 include_dir = 231 (path_entry_t)malloc(sizeof(*include_dir)); 232 if (include_dir == NULL) { 233 perror(optarg); 234 stop(NULL, EX_OSERR); 235 } 236 include_dir->directory = strdup(optarg); 237 if (include_dir->directory == NULL) { 238 perror(optarg); 239 stop(NULL, EX_OSERR); 240 } 241 include_dir->quoted_includes_only = 0; 242 SLIST_INSERT_HEAD(&search_path, include_dir, 243 links); 244 } 245 break; 246 } 247 case '?': 248 default: 249 usage(); 250 /* NOTREACHED */ 251 } 252 } 253 argc -= optind; 254 argv += optind; 255 256 if (argc != 1) { 257 fprintf(stderr, "%s: No input file specified\n", appname); 258 usage(); 259 /* NOTREACHED */ 260 } 261 262 if (regdiagfile != NULL 263 && (regfile == NULL || stock_include_file == NULL)) { 264 fprintf(stderr, 265 "%s: The -p option requires the -r and -i options.\n", 266 appname); 267 usage(); 268 /* NOTREACHED */ 269 } 270 symtable_open(); 271 inputfilename = *argv; 272 include_file(*argv, SOURCE_FILE); 273 retval = yyparse(); 274 if (retval == 0) { 275 if (SLIST_FIRST(&scope_stack) == NULL 276 || SLIST_FIRST(&scope_stack)->type != SCOPE_ROOT) { 277 stop("Unterminated conditional expression", EX_DATAERR); 278 /* NOTREACHED */ 279 } 280 281 /* Process outmost scope */ 282 process_scope(SLIST_FIRST(&scope_stack)); 283 /* 284 * Decend the tree of scopes and insert/emit 285 * patches as appropriate. We perform a depth first 286 * tranversal, recursively handling each scope. 287 */ 288 /* start at the root scope */ 289 dump_scope(SLIST_FIRST(&scope_stack)); 290 291 /* Patch up forward jump addresses */ 292 back_patch(); 293 294 if (ofile != NULL) 295 output_code(); 296 if (regfile != NULL) 297 symtable_dump(regfile, regdiagfile); 298 if (listfile != NULL) 299 output_listing(inputfilename); 300 } 301 302 stop(NULL, 0); 303 /* NOTREACHED */ 304 return (0); 305 } 306 307 static void 308 usage() 309 { 310 311 (void)fprintf(stderr, 312 "usage: %-16s [-nostdinc] [-I-] [-I directory] [-o output_file]\n" 313 " [-r register_output_file [-p register_diag_file -i includefile]]\n" 314 " [-l program_list_file]\n" 315 " input_file\n", appname); 316 exit(EX_USAGE); 317 } 318 319 static void 320 back_patch() 321 { 322 struct instruction *cur_instr; 323 324 for (cur_instr = STAILQ_FIRST(&seq_program); 325 cur_instr != NULL; 326 cur_instr = STAILQ_NEXT(cur_instr, links)) { 327 if (cur_instr->patch_label != NULL) { 328 struct ins_format3 *f3_instr; 329 u_int address; 330 331 if (cur_instr->patch_label->type != LABEL) { 332 char buf[255]; 333 334 snprintf(buf, sizeof(buf), 335 "Undefined label %s", 336 cur_instr->patch_label->name); 337 stop(buf, EX_DATAERR); 338 /* NOTREACHED */ 339 } 340 f3_instr = &cur_instr->format.format3; 341 address = f3_instr->address; 342 address += cur_instr->patch_label->info.linfo->address; 343 f3_instr->address = address; 344 } 345 } 346 } 347 348 static void 349 output_code() 350 { 351 struct instruction *cur_instr; 352 patch_t *cur_patch; 353 critical_section_t *cs; 354 symbol_node_t *cur_node; 355 int instrcount; 356 357 instrcount = 0; 358 fprintf(ofile, 359 "/*\n" 360 " * DO NOT EDIT - This file is automatically generated\n" 361 " * from the following source files:\n" 362 " *\n" 363 "%s */\n", versions); 364 365 fprintf(ofile, "static const uint8_t seqprog[] = {\n"); 366 for (cur_instr = STAILQ_FIRST(&seq_program); 367 cur_instr != NULL; 368 cur_instr = STAILQ_NEXT(cur_instr, links)) { 369 370 fprintf(ofile, "%s\t0x%02x, 0x%02x, 0x%02x, 0x%02x", 371 cur_instr == STAILQ_FIRST(&seq_program) ? "" : ",\n", 372 #ifdef __LITTLE_ENDIAN 373 cur_instr->format.bytes[0], 374 cur_instr->format.bytes[1], 375 cur_instr->format.bytes[2], 376 cur_instr->format.bytes[3]); 377 #else 378 cur_instr->format.bytes[3], 379 cur_instr->format.bytes[2], 380 cur_instr->format.bytes[1], 381 cur_instr->format.bytes[0]); 382 #endif 383 instrcount++; 384 } 385 fprintf(ofile, "\n};\n\n"); 386 387 if (patch_arg_list == NULL) 388 stop("Patch argument list not defined", 389 EX_DATAERR); 390 391 /* 392 * Output patch information. Patch functions first. 393 */ 394 fprintf(ofile, 395 "typedef int %spatch_func_t (%s);\n", prefix, patch_arg_list); 396 397 for (cur_node = SLIST_FIRST(&patch_functions); 398 cur_node != NULL; 399 cur_node = SLIST_NEXT(cur_node,links)) { 400 fprintf(ofile, 401 "static %spatch_func_t %spatch%d_func;\n" 402 "\n" 403 "static int\n" 404 "%spatch%d_func(%s)\n" 405 "{\n" 406 " return (%s);\n" 407 "}\n\n", 408 prefix, 409 prefix, 410 cur_node->symbol->info.condinfo->func_num, 411 prefix, 412 cur_node->symbol->info.condinfo->func_num, 413 patch_arg_list, 414 cur_node->symbol->name); 415 } 416 417 fprintf(ofile, 418 "static const struct patch {\n" 419 " %spatch_func_t *patch_func;\n" 420 " uint32_t begin :10,\n" 421 " skip_instr :10,\n" 422 " skip_patch :12;\n" 423 "} patches[] = {\n", prefix); 424 425 for (cur_patch = STAILQ_FIRST(&patches); 426 cur_patch != NULL; 427 cur_patch = STAILQ_NEXT(cur_patch,links)) { 428 fprintf(ofile, "%s\t{ %spatch%d_func, %d, %d, %d }", 429 cur_patch == STAILQ_FIRST(&patches) ? "" : ",\n", 430 prefix, 431 cur_patch->patch_func, cur_patch->begin, 432 cur_patch->skip_instr, cur_patch->skip_patch); 433 } 434 435 fprintf(ofile, "\n};\n\n"); 436 437 fprintf(ofile, 438 "static const struct cs {\n" 439 " uint16_t begin;\n" 440 " uint16_t end;\n" 441 "} critical_sections[] = {\n"); 442 443 for (cs = TAILQ_FIRST(&cs_tailq); 444 cs != NULL; 445 cs = TAILQ_NEXT(cs, links)) { 446 fprintf(ofile, "%s\t{ %d, %d }", 447 cs == TAILQ_FIRST(&cs_tailq) ? "" : ",\n", 448 cs->begin_addr, cs->end_addr); 449 } 450 451 fprintf(ofile, "\n};\n\n"); 452 453 fprintf(ofile, 454 "#define NUM_CRITICAL_SECTIONS ARRAY_SIZE(critical_sections)\n"); 455 456 fprintf(stderr, "%s: %d instructions used\n", appname, instrcount); 457 } 458 459 static void 460 dump_scope(scope_t *scope) 461 { 462 scope_t *cur_scope; 463 464 /* 465 * Emit the first patch for this scope 466 */ 467 emit_patch(scope, 0); 468 469 /* 470 * Dump each scope within this one. 471 */ 472 cur_scope = TAILQ_FIRST(&scope->inner_scope); 473 474 while (cur_scope != NULL) { 475 476 dump_scope(cur_scope); 477 478 cur_scope = TAILQ_NEXT(cur_scope, scope_links); 479 } 480 481 /* 482 * Emit the second, closing, patch for this scope 483 */ 484 emit_patch(scope, 1); 485 } 486 487 void 488 emit_patch(scope_t *scope, int patch) 489 { 490 patch_info_t *pinfo; 491 patch_t *new_patch; 492 493 pinfo = &scope->patches[patch]; 494 495 if (pinfo->skip_instr == 0) 496 /* No-Op patch */ 497 return; 498 499 new_patch = (patch_t *)malloc(sizeof(*new_patch)); 500 501 if (new_patch == NULL) 502 stop("Could not malloc patch structure", EX_OSERR); 503 504 memset(new_patch, 0, sizeof(*new_patch)); 505 506 if (patch == 0) { 507 new_patch->patch_func = scope->func_num; 508 new_patch->begin = scope->begin_addr; 509 } else { 510 new_patch->patch_func = 0; 511 new_patch->begin = scope->end_addr; 512 } 513 new_patch->skip_instr = pinfo->skip_instr; 514 new_patch->skip_patch = pinfo->skip_patch; 515 STAILQ_INSERT_TAIL(&patches, new_patch, links); 516 } 517 518 void 519 output_listing(char *ifilename) 520 { 521 char buf[1024]; 522 FILE *ifile; 523 struct instruction *cur_instr; 524 patch_t *cur_patch; 525 symbol_node_t *cur_func; 526 int *func_values; 527 int instrcount; 528 int instrptr; 529 int line; 530 int func_count; 531 int skip_addr; 532 533 instrcount = 0; 534 instrptr = 0; 535 line = 1; 536 skip_addr = 0; 537 if ((ifile = fopen(ifilename, "r")) == NULL) { 538 perror(ifilename); 539 stop(NULL, EX_DATAERR); 540 } 541 542 /* 543 * Determine which options to apply to this listing. 544 */ 545 for (func_count = 0, cur_func = SLIST_FIRST(&patch_functions); 546 cur_func != NULL; 547 cur_func = SLIST_NEXT(cur_func, links)) 548 func_count++; 549 550 func_values = NULL; 551 if (func_count != 0) { 552 func_values = (int *)malloc(func_count * sizeof(int)); 553 554 if (func_values == NULL) 555 stop("Could not malloc", EX_OSERR); 556 557 func_values[0] = 0; /* FALSE func */ 558 func_count--; 559 560 /* 561 * Ask the user to fill in the return values for 562 * the rest of the functions. 563 */ 564 565 566 for (cur_func = SLIST_FIRST(&patch_functions); 567 cur_func != NULL && SLIST_NEXT(cur_func, links) != NULL; 568 cur_func = SLIST_NEXT(cur_func, links), func_count--) { 569 int input; 570 571 fprintf(stdout, "\n(%s)\n", cur_func->symbol->name); 572 fprintf(stdout, 573 "Enter the return value for " 574 "this expression[T/F]:"); 575 576 while (1) { 577 578 input = getchar(); 579 input = toupper(input); 580 581 if (input == 'T') { 582 func_values[func_count] = 1; 583 break; 584 } else if (input == 'F') { 585 func_values[func_count] = 0; 586 break; 587 } 588 } 589 if (isatty(fileno(stdin)) == 0) 590 putchar(input); 591 } 592 fprintf(stdout, "\nThanks!\n"); 593 } 594 595 /* Now output the listing */ 596 cur_patch = STAILQ_FIRST(&patches); 597 for (cur_instr = STAILQ_FIRST(&seq_program); 598 cur_instr != NULL; 599 cur_instr = STAILQ_NEXT(cur_instr, links), instrcount++) { 600 601 if (check_patch(&cur_patch, instrcount, 602 &skip_addr, func_values) == 0) { 603 /* Don't count this instruction as it is in a patch 604 * that was removed. 605 */ 606 continue; 607 } 608 609 while (line < cur_instr->srcline) { 610 fgets(buf, sizeof(buf), ifile); 611 fprintf(listfile, " \t%s", buf); 612 line++; 613 } 614 fprintf(listfile, "%04x %02x%02x%02x%02x", instrptr, 615 #ifdef __LITTLE_ENDIAN 616 cur_instr->format.bytes[0], 617 cur_instr->format.bytes[1], 618 cur_instr->format.bytes[2], 619 cur_instr->format.bytes[3]); 620 #else 621 cur_instr->format.bytes[3], 622 cur_instr->format.bytes[2], 623 cur_instr->format.bytes[1], 624 cur_instr->format.bytes[0]); 625 #endif 626 /* 627 * Macro expansions can cause several instructions 628 * to be output for a single source line. Only 629 * advance the line once in these cases. 630 */ 631 if (line == cur_instr->srcline) { 632 fgets(buf, sizeof(buf), ifile); 633 fprintf(listfile, "\t%s", buf); 634 line++; 635 } else { 636 fprintf(listfile, "\n"); 637 } 638 instrptr++; 639 } 640 /* Dump the remainder of the file */ 641 while(fgets(buf, sizeof(buf), ifile) != NULL) 642 fprintf(listfile, " %s", buf); 643 644 fclose(ifile); 645 } 646 647 static int 648 check_patch(patch_t **start_patch, int start_instr, 649 int *skip_addr, int *func_vals) 650 { 651 patch_t *cur_patch; 652 653 cur_patch = *start_patch; 654 655 while (cur_patch != NULL && start_instr == cur_patch->begin) { 656 if (func_vals[cur_patch->patch_func] == 0) { 657 int skip; 658 659 /* Start rejecting code */ 660 *skip_addr = start_instr + cur_patch->skip_instr; 661 for (skip = cur_patch->skip_patch; 662 skip > 0 && cur_patch != NULL; 663 skip--) 664 cur_patch = STAILQ_NEXT(cur_patch, links); 665 } else { 666 /* Accepted this patch. Advance to the next 667 * one and wait for our intruction pointer to 668 * hit this point. 669 */ 670 cur_patch = STAILQ_NEXT(cur_patch, links); 671 } 672 } 673 674 *start_patch = cur_patch; 675 if (start_instr < *skip_addr) 676 /* Still skipping */ 677 return (0); 678 679 return (1); 680 } 681 682 /* 683 * Print out error information if appropriate, and clean up before 684 * terminating the program. 685 */ 686 void 687 stop(const char *string, int err_code) 688 { 689 if (string != NULL) { 690 fprintf(stderr, "%s: ", appname); 691 if (yyfilename != NULL) { 692 fprintf(stderr, "Stopped at file %s, line %d - ", 693 yyfilename, yylineno); 694 } 695 fprintf(stderr, "%s\n", string); 696 } 697 698 if (ofile != NULL) { 699 fclose(ofile); 700 if (err_code != 0) { 701 fprintf(stderr, "%s: Removing %s due to error\n", 702 appname, ofilename); 703 unlink(ofilename); 704 } 705 } 706 707 if (regfile != NULL) { 708 fclose(regfile); 709 if (err_code != 0) { 710 fprintf(stderr, "%s: Removing %s due to error\n", 711 appname, regfilename); 712 unlink(regfilename); 713 } 714 } 715 716 if (listfile != NULL) { 717 fclose(listfile); 718 if (err_code != 0) { 719 fprintf(stderr, "%s: Removing %s due to error\n", 720 appname, listfilename); 721 unlink(listfilename); 722 } 723 } 724 725 symlist_free(&patch_functions); 726 symtable_close(); 727 728 exit(err_code); 729 } 730 731 struct instruction * 732 seq_alloc() 733 { 734 struct instruction *new_instr; 735 736 new_instr = (struct instruction *)malloc(sizeof(struct instruction)); 737 if (new_instr == NULL) 738 stop("Unable to malloc instruction object", EX_SOFTWARE); 739 memset(new_instr, 0, sizeof(*new_instr)); 740 STAILQ_INSERT_TAIL(&seq_program, new_instr, links); 741 new_instr->srcline = yylineno; 742 return new_instr; 743 } 744 745 critical_section_t * 746 cs_alloc() 747 { 748 critical_section_t *new_cs; 749 750 new_cs= (critical_section_t *)malloc(sizeof(critical_section_t)); 751 if (new_cs == NULL) 752 stop("Unable to malloc critical_section object", EX_SOFTWARE); 753 memset(new_cs, 0, sizeof(*new_cs)); 754 755 TAILQ_INSERT_TAIL(&cs_tailq, new_cs, links); 756 return new_cs; 757 } 758 759 scope_t * 760 scope_alloc() 761 { 762 scope_t *new_scope; 763 764 new_scope = (scope_t *)malloc(sizeof(scope_t)); 765 if (new_scope == NULL) 766 stop("Unable to malloc scope object", EX_SOFTWARE); 767 memset(new_scope, 0, sizeof(*new_scope)); 768 TAILQ_INIT(&new_scope->inner_scope); 769 770 if (SLIST_FIRST(&scope_stack) != NULL) { 771 TAILQ_INSERT_TAIL(&SLIST_FIRST(&scope_stack)->inner_scope, 772 new_scope, scope_links); 773 } 774 /* This patch is now the current scope */ 775 SLIST_INSERT_HEAD(&scope_stack, new_scope, scope_stack_links); 776 return new_scope; 777 } 778 779 void 780 process_scope(scope_t *scope) 781 { 782 /* 783 * We are "leaving" this scope. We should now have 784 * enough information to process the lists of scopes 785 * we encapsulate. 786 */ 787 scope_t *cur_scope; 788 u_int skip_patch_count; 789 u_int skip_instr_count; 790 791 cur_scope = TAILQ_LAST(&scope->inner_scope, scope_tailq); 792 skip_patch_count = 0; 793 skip_instr_count = 0; 794 while (cur_scope != NULL) { 795 u_int patch0_patch_skip; 796 797 patch0_patch_skip = 0; 798 switch (cur_scope->type) { 799 case SCOPE_IF: 800 case SCOPE_ELSE_IF: 801 if (skip_instr_count != 0) { 802 /* Create a tail patch */ 803 patch0_patch_skip++; 804 cur_scope->patches[1].skip_patch = 805 skip_patch_count + 1; 806 cur_scope->patches[1].skip_instr = 807 skip_instr_count; 808 } 809 810 /* Count Head patch */ 811 patch0_patch_skip++; 812 813 /* Count any patches contained in our inner scope */ 814 patch0_patch_skip += cur_scope->inner_scope_patches; 815 816 cur_scope->patches[0].skip_patch = patch0_patch_skip; 817 cur_scope->patches[0].skip_instr = 818 cur_scope->end_addr - cur_scope->begin_addr; 819 820 skip_instr_count += cur_scope->patches[0].skip_instr; 821 822 skip_patch_count += patch0_patch_skip; 823 if (cur_scope->type == SCOPE_IF) { 824 scope->inner_scope_patches += skip_patch_count; 825 skip_patch_count = 0; 826 skip_instr_count = 0; 827 } 828 break; 829 case SCOPE_ELSE: 830 /* Count any patches contained in our innter scope */ 831 skip_patch_count += cur_scope->inner_scope_patches; 832 833 skip_instr_count += cur_scope->end_addr 834 - cur_scope->begin_addr; 835 break; 836 case SCOPE_ROOT: 837 stop("Unexpected scope type encountered", EX_SOFTWARE); 838 /* NOTREACHED */ 839 } 840 841 cur_scope = TAILQ_PREV(cur_scope, scope_tailq, scope_links); 842 } 843 } 844