1 /* 2 * Core routines and tables shareable across OS platforms. 3 * 4 * Copyright (c) 1994-2002 Justin T. Gibbs. 5 * Copyright (c) 2000-2002 Adaptec Inc. 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions, and the following disclaimer, 13 * without modification. 14 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 15 * substantially similar to the "NO WARRANTY" disclaimer below 16 * ("Disclaimer") and any redistribution must be conditioned upon 17 * including a substantially similar Disclaimer requirement for further 18 * binary redistribution. 19 * 3. Neither the names of the above-listed copyright holders nor the names 20 * of any contributors may be used to endorse or promote products derived 21 * from this software without specific prior written permission. 22 * 23 * Alternatively, this software may be distributed under the terms of the 24 * GNU General Public License ("GPL") version 2 as published by the Free 25 * Software Foundation. 26 * 27 * NO WARRANTY 28 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 29 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 30 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 31 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 32 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 33 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 34 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 35 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 36 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 37 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 38 * POSSIBILITY OF SUCH DAMAGES. 39 * 40 * $Id: //depot/aic7xxx/aic7xxx/aic7xxx.c#155 $ 41 */ 42 43 #include "aic7xxx_osm.h" 44 #include "aic7xxx_inline.h" 45 #include "aicasm/aicasm_insformat.h" 46 47 /***************************** Lookup Tables **********************************/ 48 static const char *const ahc_chip_names[] = { 49 "NONE", 50 "aic7770", 51 "aic7850", 52 "aic7855", 53 "aic7859", 54 "aic7860", 55 "aic7870", 56 "aic7880", 57 "aic7895", 58 "aic7895C", 59 "aic7890/91", 60 "aic7896/97", 61 "aic7892", 62 "aic7899" 63 }; 64 65 /* 66 * Hardware error codes. 67 */ 68 struct ahc_hard_error_entry { 69 uint8_t errno; 70 const char *errmesg; 71 }; 72 73 static const struct ahc_hard_error_entry ahc_hard_errors[] = { 74 { ILLHADDR, "Illegal Host Access" }, 75 { ILLSADDR, "Illegal Sequencer Address referenced" }, 76 { ILLOPCODE, "Illegal Opcode in sequencer program" }, 77 { SQPARERR, "Sequencer Parity Error" }, 78 { DPARERR, "Data-path Parity Error" }, 79 { MPARERR, "Scratch or SCB Memory Parity Error" }, 80 { PCIERRSTAT, "PCI Error detected" }, 81 { CIOPARERR, "CIOBUS Parity Error" }, 82 }; 83 static const u_int num_errors = ARRAY_SIZE(ahc_hard_errors); 84 85 static const struct ahc_phase_table_entry ahc_phase_table[] = 86 { 87 { P_DATAOUT, MSG_NOOP, "in Data-out phase" }, 88 { P_DATAIN, MSG_INITIATOR_DET_ERR, "in Data-in phase" }, 89 { P_DATAOUT_DT, MSG_NOOP, "in DT Data-out phase" }, 90 { P_DATAIN_DT, MSG_INITIATOR_DET_ERR, "in DT Data-in phase" }, 91 { P_COMMAND, MSG_NOOP, "in Command phase" }, 92 { P_MESGOUT, MSG_NOOP, "in Message-out phase" }, 93 { P_STATUS, MSG_INITIATOR_DET_ERR, "in Status phase" }, 94 { P_MESGIN, MSG_PARITY_ERROR, "in Message-in phase" }, 95 { P_BUSFREE, MSG_NOOP, "while idle" }, 96 { 0, MSG_NOOP, "in unknown phase" } 97 }; 98 99 /* 100 * In most cases we only wish to itterate over real phases, so 101 * exclude the last element from the count. 102 */ 103 static const u_int num_phases = ARRAY_SIZE(ahc_phase_table) - 1; 104 105 /* 106 * Valid SCSIRATE values. (p. 3-17) 107 * Provides a mapping of tranfer periods in ns to the proper value to 108 * stick in the scsixfer reg. 109 */ 110 static const struct ahc_syncrate ahc_syncrates[] = 111 { 112 /* ultra2 fast/ultra period rate */ 113 { 0x42, 0x000, 9, "80.0" }, 114 { 0x03, 0x000, 10, "40.0" }, 115 { 0x04, 0x000, 11, "33.0" }, 116 { 0x05, 0x100, 12, "20.0" }, 117 { 0x06, 0x110, 15, "16.0" }, 118 { 0x07, 0x120, 18, "13.4" }, 119 { 0x08, 0x000, 25, "10.0" }, 120 { 0x19, 0x010, 31, "8.0" }, 121 { 0x1a, 0x020, 37, "6.67" }, 122 { 0x1b, 0x030, 43, "5.7" }, 123 { 0x1c, 0x040, 50, "5.0" }, 124 { 0x00, 0x050, 56, "4.4" }, 125 { 0x00, 0x060, 62, "4.0" }, 126 { 0x00, 0x070, 68, "3.6" }, 127 { 0x00, 0x000, 0, NULL } 128 }; 129 130 /* Our Sequencer Program */ 131 #include "aic7xxx_seq.h" 132 133 /**************************** Function Declarations ***************************/ 134 static void ahc_force_renegotiation(struct ahc_softc *ahc, 135 struct ahc_devinfo *devinfo); 136 static struct ahc_tmode_tstate* 137 ahc_alloc_tstate(struct ahc_softc *ahc, 138 u_int scsi_id, char channel); 139 #ifdef AHC_TARGET_MODE 140 static void ahc_free_tstate(struct ahc_softc *ahc, 141 u_int scsi_id, char channel, int force); 142 #endif 143 static const struct ahc_syncrate* 144 ahc_devlimited_syncrate(struct ahc_softc *ahc, 145 struct ahc_initiator_tinfo *, 146 u_int *period, 147 u_int *ppr_options, 148 role_t role); 149 static void ahc_update_pending_scbs(struct ahc_softc *ahc); 150 static void ahc_fetch_devinfo(struct ahc_softc *ahc, 151 struct ahc_devinfo *devinfo); 152 static void ahc_scb_devinfo(struct ahc_softc *ahc, 153 struct ahc_devinfo *devinfo, 154 struct scb *scb); 155 static void ahc_assert_atn(struct ahc_softc *ahc); 156 static void ahc_setup_initiator_msgout(struct ahc_softc *ahc, 157 struct ahc_devinfo *devinfo, 158 struct scb *scb); 159 static void ahc_build_transfer_msg(struct ahc_softc *ahc, 160 struct ahc_devinfo *devinfo); 161 static void ahc_construct_sdtr(struct ahc_softc *ahc, 162 struct ahc_devinfo *devinfo, 163 u_int period, u_int offset); 164 static void ahc_construct_wdtr(struct ahc_softc *ahc, 165 struct ahc_devinfo *devinfo, 166 u_int bus_width); 167 static void ahc_construct_ppr(struct ahc_softc *ahc, 168 struct ahc_devinfo *devinfo, 169 u_int period, u_int offset, 170 u_int bus_width, u_int ppr_options); 171 static void ahc_clear_msg_state(struct ahc_softc *ahc); 172 static void ahc_handle_proto_violation(struct ahc_softc *ahc); 173 static void ahc_handle_message_phase(struct ahc_softc *ahc); 174 typedef enum { 175 AHCMSG_1B, 176 AHCMSG_2B, 177 AHCMSG_EXT 178 } ahc_msgtype; 179 static int ahc_sent_msg(struct ahc_softc *ahc, ahc_msgtype type, 180 u_int msgval, int full); 181 static int ahc_parse_msg(struct ahc_softc *ahc, 182 struct ahc_devinfo *devinfo); 183 static int ahc_handle_msg_reject(struct ahc_softc *ahc, 184 struct ahc_devinfo *devinfo); 185 static void ahc_handle_ign_wide_residue(struct ahc_softc *ahc, 186 struct ahc_devinfo *devinfo); 187 static void ahc_reinitialize_dataptrs(struct ahc_softc *ahc); 188 static void ahc_handle_devreset(struct ahc_softc *ahc, 189 struct ahc_devinfo *devinfo, 190 cam_status status, char *message, 191 int verbose_level); 192 #ifdef AHC_TARGET_MODE 193 static void ahc_setup_target_msgin(struct ahc_softc *ahc, 194 struct ahc_devinfo *devinfo, 195 struct scb *scb); 196 #endif 197 198 static bus_dmamap_callback_t ahc_dmamap_cb; 199 static void ahc_build_free_scb_list(struct ahc_softc *ahc); 200 static int ahc_init_scbdata(struct ahc_softc *ahc); 201 static void ahc_fini_scbdata(struct ahc_softc *ahc); 202 static void ahc_qinfifo_requeue(struct ahc_softc *ahc, 203 struct scb *prev_scb, 204 struct scb *scb); 205 static int ahc_qinfifo_count(struct ahc_softc *ahc); 206 static u_int ahc_rem_scb_from_disc_list(struct ahc_softc *ahc, 207 u_int prev, u_int scbptr); 208 static void ahc_add_curscb_to_free_list(struct ahc_softc *ahc); 209 static u_int ahc_rem_wscb(struct ahc_softc *ahc, 210 u_int scbpos, u_int prev); 211 static void ahc_reset_current_bus(struct ahc_softc *ahc); 212 #ifdef AHC_DUMP_SEQ 213 static void ahc_dumpseq(struct ahc_softc *ahc); 214 #endif 215 static int ahc_loadseq(struct ahc_softc *ahc); 216 static int ahc_check_patch(struct ahc_softc *ahc, 217 const struct patch **start_patch, 218 u_int start_instr, u_int *skip_addr); 219 static void ahc_download_instr(struct ahc_softc *ahc, 220 u_int instrptr, uint8_t *dconsts); 221 #ifdef AHC_TARGET_MODE 222 static void ahc_queue_lstate_event(struct ahc_softc *ahc, 223 struct ahc_tmode_lstate *lstate, 224 u_int initiator_id, 225 u_int event_type, 226 u_int event_arg); 227 static void ahc_update_scsiid(struct ahc_softc *ahc, 228 u_int targid_mask); 229 static int ahc_handle_target_cmd(struct ahc_softc *ahc, 230 struct target_cmd *cmd); 231 #endif 232 233 static u_int ahc_index_busy_tcl(struct ahc_softc *ahc, u_int tcl); 234 static void ahc_unbusy_tcl(struct ahc_softc *ahc, u_int tcl); 235 static void ahc_busy_tcl(struct ahc_softc *ahc, 236 u_int tcl, u_int busyid); 237 238 /************************** SCB and SCB queue management **********************/ 239 static void ahc_run_untagged_queues(struct ahc_softc *ahc); 240 static void ahc_run_untagged_queue(struct ahc_softc *ahc, 241 struct scb_tailq *queue); 242 243 /****************************** Initialization ********************************/ 244 static void ahc_alloc_scbs(struct ahc_softc *ahc); 245 static void ahc_shutdown(void *arg); 246 247 /*************************** Interrupt Services *******************************/ 248 static void ahc_clear_intstat(struct ahc_softc *ahc); 249 static void ahc_run_qoutfifo(struct ahc_softc *ahc); 250 #ifdef AHC_TARGET_MODE 251 static void ahc_run_tqinfifo(struct ahc_softc *ahc, int paused); 252 #endif 253 static void ahc_handle_brkadrint(struct ahc_softc *ahc); 254 static void ahc_handle_seqint(struct ahc_softc *ahc, u_int intstat); 255 static void ahc_handle_scsiint(struct ahc_softc *ahc, 256 u_int intstat); 257 static void ahc_clear_critical_section(struct ahc_softc *ahc); 258 259 /***************************** Error Recovery *********************************/ 260 static void ahc_freeze_devq(struct ahc_softc *ahc, struct scb *scb); 261 static int ahc_abort_scbs(struct ahc_softc *ahc, int target, 262 char channel, int lun, u_int tag, 263 role_t role, uint32_t status); 264 static void ahc_calc_residual(struct ahc_softc *ahc, 265 struct scb *scb); 266 267 /*********************** Untagged Transaction Routines ************************/ 268 static inline void ahc_freeze_untagged_queues(struct ahc_softc *ahc); 269 static inline void ahc_release_untagged_queues(struct ahc_softc *ahc); 270 271 /* 272 * Block our completion routine from starting the next untagged 273 * transaction for this target or target lun. 274 */ 275 static inline void 276 ahc_freeze_untagged_queues(struct ahc_softc *ahc) 277 { 278 if ((ahc->flags & AHC_SCB_BTT) == 0) 279 ahc->untagged_queue_lock++; 280 } 281 282 /* 283 * Allow the next untagged transaction for this target or target lun 284 * to be executed. We use a counting semaphore to allow the lock 285 * to be acquired recursively. Once the count drops to zero, the 286 * transaction queues will be run. 287 */ 288 static inline void 289 ahc_release_untagged_queues(struct ahc_softc *ahc) 290 { 291 if ((ahc->flags & AHC_SCB_BTT) == 0) { 292 ahc->untagged_queue_lock--; 293 if (ahc->untagged_queue_lock == 0) 294 ahc_run_untagged_queues(ahc); 295 } 296 } 297 298 /************************* Sequencer Execution Control ************************/ 299 /* 300 * Work around any chip bugs related to halting sequencer execution. 301 * On Ultra2 controllers, we must clear the CIOBUS stretch signal by 302 * reading a register that will set this signal and deassert it. 303 * Without this workaround, if the chip is paused, by an interrupt or 304 * manual pause while accessing scb ram, accesses to certain registers 305 * will hang the system (infinite pci retries). 306 */ 307 static void 308 ahc_pause_bug_fix(struct ahc_softc *ahc) 309 { 310 if ((ahc->features & AHC_ULTRA2) != 0) 311 (void)ahc_inb(ahc, CCSCBCTL); 312 } 313 314 /* 315 * Determine whether the sequencer has halted code execution. 316 * Returns non-zero status if the sequencer is stopped. 317 */ 318 int 319 ahc_is_paused(struct ahc_softc *ahc) 320 { 321 return ((ahc_inb(ahc, HCNTRL) & PAUSE) != 0); 322 } 323 324 /* 325 * Request that the sequencer stop and wait, indefinitely, for it 326 * to stop. The sequencer will only acknowledge that it is paused 327 * once it has reached an instruction boundary and PAUSEDIS is 328 * cleared in the SEQCTL register. The sequencer may use PAUSEDIS 329 * for critical sections. 330 */ 331 void 332 ahc_pause(struct ahc_softc *ahc) 333 { 334 ahc_outb(ahc, HCNTRL, ahc->pause); 335 336 /* 337 * Since the sequencer can disable pausing in a critical section, we 338 * must loop until it actually stops. 339 */ 340 while (ahc_is_paused(ahc) == 0) 341 ; 342 343 ahc_pause_bug_fix(ahc); 344 } 345 346 /* 347 * Allow the sequencer to continue program execution. 348 * We check here to ensure that no additional interrupt 349 * sources that would cause the sequencer to halt have been 350 * asserted. If, for example, a SCSI bus reset is detected 351 * while we are fielding a different, pausing, interrupt type, 352 * we don't want to release the sequencer before going back 353 * into our interrupt handler and dealing with this new 354 * condition. 355 */ 356 void 357 ahc_unpause(struct ahc_softc *ahc) 358 { 359 if ((ahc_inb(ahc, INTSTAT) & (SCSIINT | SEQINT | BRKADRINT)) == 0) 360 ahc_outb(ahc, HCNTRL, ahc->unpause); 361 } 362 363 /************************** Memory mapping routines ***************************/ 364 static struct ahc_dma_seg * 365 ahc_sg_bus_to_virt(struct scb *scb, uint32_t sg_busaddr) 366 { 367 int sg_index; 368 369 sg_index = (sg_busaddr - scb->sg_list_phys)/sizeof(struct ahc_dma_seg); 370 /* sg_list_phys points to entry 1, not 0 */ 371 sg_index++; 372 373 return (&scb->sg_list[sg_index]); 374 } 375 376 static uint32_t 377 ahc_sg_virt_to_bus(struct scb *scb, struct ahc_dma_seg *sg) 378 { 379 int sg_index; 380 381 /* sg_list_phys points to entry 1, not 0 */ 382 sg_index = sg - &scb->sg_list[1]; 383 384 return (scb->sg_list_phys + (sg_index * sizeof(*scb->sg_list))); 385 } 386 387 static uint32_t 388 ahc_hscb_busaddr(struct ahc_softc *ahc, u_int index) 389 { 390 return (ahc->scb_data->hscb_busaddr 391 + (sizeof(struct hardware_scb) * index)); 392 } 393 394 static void 395 ahc_sync_scb(struct ahc_softc *ahc, struct scb *scb, int op) 396 { 397 ahc_dmamap_sync(ahc, ahc->scb_data->hscb_dmat, 398 ahc->scb_data->hscb_dmamap, 399 /*offset*/(scb->hscb - ahc->hscbs) * sizeof(*scb->hscb), 400 /*len*/sizeof(*scb->hscb), op); 401 } 402 403 void 404 ahc_sync_sglist(struct ahc_softc *ahc, struct scb *scb, int op) 405 { 406 if (scb->sg_count == 0) 407 return; 408 409 ahc_dmamap_sync(ahc, ahc->scb_data->sg_dmat, scb->sg_map->sg_dmamap, 410 /*offset*/(scb->sg_list - scb->sg_map->sg_vaddr) 411 * sizeof(struct ahc_dma_seg), 412 /*len*/sizeof(struct ahc_dma_seg) * scb->sg_count, op); 413 } 414 415 #ifdef AHC_TARGET_MODE 416 static uint32_t 417 ahc_targetcmd_offset(struct ahc_softc *ahc, u_int index) 418 { 419 return (((uint8_t *)&ahc->targetcmds[index]) - ahc->qoutfifo); 420 } 421 #endif 422 423 /*********************** Miscellaneous Support Functions ***********************/ 424 /* 425 * Determine whether the sequencer reported a residual 426 * for this SCB/transaction. 427 */ 428 static void 429 ahc_update_residual(struct ahc_softc *ahc, struct scb *scb) 430 { 431 uint32_t sgptr; 432 433 sgptr = ahc_le32toh(scb->hscb->sgptr); 434 if ((sgptr & SG_RESID_VALID) != 0) 435 ahc_calc_residual(ahc, scb); 436 } 437 438 /* 439 * Return pointers to the transfer negotiation information 440 * for the specified our_id/remote_id pair. 441 */ 442 struct ahc_initiator_tinfo * 443 ahc_fetch_transinfo(struct ahc_softc *ahc, char channel, u_int our_id, 444 u_int remote_id, struct ahc_tmode_tstate **tstate) 445 { 446 /* 447 * Transfer data structures are stored from the perspective 448 * of the target role. Since the parameters for a connection 449 * in the initiator role to a given target are the same as 450 * when the roles are reversed, we pretend we are the target. 451 */ 452 if (channel == 'B') 453 our_id += 8; 454 *tstate = ahc->enabled_targets[our_id]; 455 return (&(*tstate)->transinfo[remote_id]); 456 } 457 458 uint16_t 459 ahc_inw(struct ahc_softc *ahc, u_int port) 460 { 461 uint16_t r = ahc_inb(ahc, port+1) << 8; 462 return r | ahc_inb(ahc, port); 463 } 464 465 void 466 ahc_outw(struct ahc_softc *ahc, u_int port, u_int value) 467 { 468 ahc_outb(ahc, port, value & 0xFF); 469 ahc_outb(ahc, port+1, (value >> 8) & 0xFF); 470 } 471 472 uint32_t 473 ahc_inl(struct ahc_softc *ahc, u_int port) 474 { 475 return ((ahc_inb(ahc, port)) 476 | (ahc_inb(ahc, port+1) << 8) 477 | (ahc_inb(ahc, port+2) << 16) 478 | (ahc_inb(ahc, port+3) << 24)); 479 } 480 481 void 482 ahc_outl(struct ahc_softc *ahc, u_int port, uint32_t value) 483 { 484 ahc_outb(ahc, port, (value) & 0xFF); 485 ahc_outb(ahc, port+1, ((value) >> 8) & 0xFF); 486 ahc_outb(ahc, port+2, ((value) >> 16) & 0xFF); 487 ahc_outb(ahc, port+3, ((value) >> 24) & 0xFF); 488 } 489 490 uint64_t 491 ahc_inq(struct ahc_softc *ahc, u_int port) 492 { 493 return ((ahc_inb(ahc, port)) 494 | (ahc_inb(ahc, port+1) << 8) 495 | (ahc_inb(ahc, port+2) << 16) 496 | (ahc_inb(ahc, port+3) << 24) 497 | (((uint64_t)ahc_inb(ahc, port+4)) << 32) 498 | (((uint64_t)ahc_inb(ahc, port+5)) << 40) 499 | (((uint64_t)ahc_inb(ahc, port+6)) << 48) 500 | (((uint64_t)ahc_inb(ahc, port+7)) << 56)); 501 } 502 503 void 504 ahc_outq(struct ahc_softc *ahc, u_int port, uint64_t value) 505 { 506 ahc_outb(ahc, port, value & 0xFF); 507 ahc_outb(ahc, port+1, (value >> 8) & 0xFF); 508 ahc_outb(ahc, port+2, (value >> 16) & 0xFF); 509 ahc_outb(ahc, port+3, (value >> 24) & 0xFF); 510 ahc_outb(ahc, port+4, (value >> 32) & 0xFF); 511 ahc_outb(ahc, port+5, (value >> 40) & 0xFF); 512 ahc_outb(ahc, port+6, (value >> 48) & 0xFF); 513 ahc_outb(ahc, port+7, (value >> 56) & 0xFF); 514 } 515 516 /* 517 * Get a free scb. If there are none, see if we can allocate a new SCB. 518 */ 519 struct scb * 520 ahc_get_scb(struct ahc_softc *ahc) 521 { 522 struct scb *scb; 523 524 if ((scb = SLIST_FIRST(&ahc->scb_data->free_scbs)) == NULL) { 525 ahc_alloc_scbs(ahc); 526 scb = SLIST_FIRST(&ahc->scb_data->free_scbs); 527 if (scb == NULL) 528 return (NULL); 529 } 530 SLIST_REMOVE_HEAD(&ahc->scb_data->free_scbs, links.sle); 531 return (scb); 532 } 533 534 /* 535 * Return an SCB resource to the free list. 536 */ 537 void 538 ahc_free_scb(struct ahc_softc *ahc, struct scb *scb) 539 { 540 struct hardware_scb *hscb; 541 542 hscb = scb->hscb; 543 /* Clean up for the next user */ 544 ahc->scb_data->scbindex[hscb->tag] = NULL; 545 scb->flags = SCB_FREE; 546 hscb->control = 0; 547 548 SLIST_INSERT_HEAD(&ahc->scb_data->free_scbs, scb, links.sle); 549 550 /* Notify the OSM that a resource is now available. */ 551 ahc_platform_scb_free(ahc, scb); 552 } 553 554 struct scb * 555 ahc_lookup_scb(struct ahc_softc *ahc, u_int tag) 556 { 557 struct scb* scb; 558 559 scb = ahc->scb_data->scbindex[tag]; 560 if (scb != NULL) 561 ahc_sync_scb(ahc, scb, 562 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 563 return (scb); 564 } 565 566 static void 567 ahc_swap_with_next_hscb(struct ahc_softc *ahc, struct scb *scb) 568 { 569 struct hardware_scb *q_hscb; 570 u_int saved_tag; 571 572 /* 573 * Our queuing method is a bit tricky. The card 574 * knows in advance which HSCB to download, and we 575 * can't disappoint it. To achieve this, the next 576 * SCB to download is saved off in ahc->next_queued_scb. 577 * When we are called to queue "an arbitrary scb", 578 * we copy the contents of the incoming HSCB to the one 579 * the sequencer knows about, swap HSCB pointers and 580 * finally assign the SCB to the tag indexed location 581 * in the scb_array. This makes sure that we can still 582 * locate the correct SCB by SCB_TAG. 583 */ 584 q_hscb = ahc->next_queued_scb->hscb; 585 saved_tag = q_hscb->tag; 586 memcpy(q_hscb, scb->hscb, sizeof(*scb->hscb)); 587 if ((scb->flags & SCB_CDB32_PTR) != 0) { 588 q_hscb->shared_data.cdb_ptr = 589 ahc_htole32(ahc_hscb_busaddr(ahc, q_hscb->tag) 590 + offsetof(struct hardware_scb, cdb32)); 591 } 592 q_hscb->tag = saved_tag; 593 q_hscb->next = scb->hscb->tag; 594 595 /* Now swap HSCB pointers. */ 596 ahc->next_queued_scb->hscb = scb->hscb; 597 scb->hscb = q_hscb; 598 599 /* Now define the mapping from tag to SCB in the scbindex */ 600 ahc->scb_data->scbindex[scb->hscb->tag] = scb; 601 } 602 603 /* 604 * Tell the sequencer about a new transaction to execute. 605 */ 606 void 607 ahc_queue_scb(struct ahc_softc *ahc, struct scb *scb) 608 { 609 ahc_swap_with_next_hscb(ahc, scb); 610 611 if (scb->hscb->tag == SCB_LIST_NULL 612 || scb->hscb->next == SCB_LIST_NULL) 613 panic("Attempt to queue invalid SCB tag %x:%x\n", 614 scb->hscb->tag, scb->hscb->next); 615 616 /* 617 * Setup data "oddness". 618 */ 619 scb->hscb->lun &= LID; 620 if (ahc_get_transfer_length(scb) & 0x1) 621 scb->hscb->lun |= SCB_XFERLEN_ODD; 622 623 /* 624 * Keep a history of SCBs we've downloaded in the qinfifo. 625 */ 626 ahc->qinfifo[ahc->qinfifonext++] = scb->hscb->tag; 627 628 /* 629 * Make sure our data is consistent from the 630 * perspective of the adapter. 631 */ 632 ahc_sync_scb(ahc, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 633 634 /* Tell the adapter about the newly queued SCB */ 635 if ((ahc->features & AHC_QUEUE_REGS) != 0) { 636 ahc_outb(ahc, HNSCB_QOFF, ahc->qinfifonext); 637 } else { 638 if ((ahc->features & AHC_AUTOPAUSE) == 0) 639 ahc_pause(ahc); 640 ahc_outb(ahc, KERNEL_QINPOS, ahc->qinfifonext); 641 if ((ahc->features & AHC_AUTOPAUSE) == 0) 642 ahc_unpause(ahc); 643 } 644 } 645 646 struct scsi_sense_data * 647 ahc_get_sense_buf(struct ahc_softc *ahc, struct scb *scb) 648 { 649 int offset; 650 651 offset = scb - ahc->scb_data->scbarray; 652 return (&ahc->scb_data->sense[offset]); 653 } 654 655 static uint32_t 656 ahc_get_sense_bufaddr(struct ahc_softc *ahc, struct scb *scb) 657 { 658 int offset; 659 660 offset = scb - ahc->scb_data->scbarray; 661 return (ahc->scb_data->sense_busaddr 662 + (offset * sizeof(struct scsi_sense_data))); 663 } 664 665 /************************** Interrupt Processing ******************************/ 666 static void 667 ahc_sync_qoutfifo(struct ahc_softc *ahc, int op) 668 { 669 ahc_dmamap_sync(ahc, ahc->shared_data_dmat, ahc->shared_data_dmamap, 670 /*offset*/0, /*len*/256, op); 671 } 672 673 static void 674 ahc_sync_tqinfifo(struct ahc_softc *ahc, int op) 675 { 676 #ifdef AHC_TARGET_MODE 677 if ((ahc->flags & AHC_TARGETROLE) != 0) { 678 ahc_dmamap_sync(ahc, ahc->shared_data_dmat, 679 ahc->shared_data_dmamap, 680 ahc_targetcmd_offset(ahc, 0), 681 sizeof(struct target_cmd) * AHC_TMODE_CMDS, 682 op); 683 } 684 #endif 685 } 686 687 /* 688 * See if the firmware has posted any completed commands 689 * into our in-core command complete fifos. 690 */ 691 #define AHC_RUN_QOUTFIFO 0x1 692 #define AHC_RUN_TQINFIFO 0x2 693 static u_int 694 ahc_check_cmdcmpltqueues(struct ahc_softc *ahc) 695 { 696 u_int retval; 697 698 retval = 0; 699 ahc_dmamap_sync(ahc, ahc->shared_data_dmat, ahc->shared_data_dmamap, 700 /*offset*/ahc->qoutfifonext, /*len*/1, 701 BUS_DMASYNC_POSTREAD); 702 if (ahc->qoutfifo[ahc->qoutfifonext] != SCB_LIST_NULL) 703 retval |= AHC_RUN_QOUTFIFO; 704 #ifdef AHC_TARGET_MODE 705 if ((ahc->flags & AHC_TARGETROLE) != 0 706 && (ahc->flags & AHC_TQINFIFO_BLOCKED) == 0) { 707 ahc_dmamap_sync(ahc, ahc->shared_data_dmat, 708 ahc->shared_data_dmamap, 709 ahc_targetcmd_offset(ahc, ahc->tqinfifofnext), 710 /*len*/sizeof(struct target_cmd), 711 BUS_DMASYNC_POSTREAD); 712 if (ahc->targetcmds[ahc->tqinfifonext].cmd_valid != 0) 713 retval |= AHC_RUN_TQINFIFO; 714 } 715 #endif 716 return (retval); 717 } 718 719 /* 720 * Catch an interrupt from the adapter 721 */ 722 int 723 ahc_intr(struct ahc_softc *ahc) 724 { 725 u_int intstat; 726 727 if ((ahc->pause & INTEN) == 0) { 728 /* 729 * Our interrupt is not enabled on the chip 730 * and may be disabled for re-entrancy reasons, 731 * so just return. This is likely just a shared 732 * interrupt. 733 */ 734 return (0); 735 } 736 /* 737 * Instead of directly reading the interrupt status register, 738 * infer the cause of the interrupt by checking our in-core 739 * completion queues. This avoids a costly PCI bus read in 740 * most cases. 741 */ 742 if ((ahc->flags & (AHC_ALL_INTERRUPTS|AHC_EDGE_INTERRUPT)) == 0 743 && (ahc_check_cmdcmpltqueues(ahc) != 0)) 744 intstat = CMDCMPLT; 745 else { 746 intstat = ahc_inb(ahc, INTSTAT); 747 } 748 749 if ((intstat & INT_PEND) == 0) { 750 #if AHC_PCI_CONFIG > 0 751 if (ahc->unsolicited_ints > 500) { 752 ahc->unsolicited_ints = 0; 753 if ((ahc->chip & AHC_PCI) != 0 754 && (ahc_inb(ahc, ERROR) & PCIERRSTAT) != 0) 755 ahc->bus_intr(ahc); 756 } 757 #endif 758 ahc->unsolicited_ints++; 759 return (0); 760 } 761 ahc->unsolicited_ints = 0; 762 763 if (intstat & CMDCMPLT) { 764 ahc_outb(ahc, CLRINT, CLRCMDINT); 765 766 /* 767 * Ensure that the chip sees that we've cleared 768 * this interrupt before we walk the output fifo. 769 * Otherwise, we may, due to posted bus writes, 770 * clear the interrupt after we finish the scan, 771 * and after the sequencer has added new entries 772 * and asserted the interrupt again. 773 */ 774 ahc_flush_device_writes(ahc); 775 ahc_run_qoutfifo(ahc); 776 #ifdef AHC_TARGET_MODE 777 if ((ahc->flags & AHC_TARGETROLE) != 0) 778 ahc_run_tqinfifo(ahc, /*paused*/FALSE); 779 #endif 780 } 781 782 /* 783 * Handle statuses that may invalidate our cached 784 * copy of INTSTAT separately. 785 */ 786 if (intstat == 0xFF && (ahc->features & AHC_REMOVABLE) != 0) { 787 /* Hot eject. Do nothing */ 788 } else if (intstat & BRKADRINT) { 789 ahc_handle_brkadrint(ahc); 790 } else if ((intstat & (SEQINT|SCSIINT)) != 0) { 791 792 ahc_pause_bug_fix(ahc); 793 794 if ((intstat & SEQINT) != 0) 795 ahc_handle_seqint(ahc, intstat); 796 797 if ((intstat & SCSIINT) != 0) 798 ahc_handle_scsiint(ahc, intstat); 799 } 800 return (1); 801 } 802 803 /************************* Sequencer Execution Control ************************/ 804 /* 805 * Restart the sequencer program from address zero 806 */ 807 static void 808 ahc_restart(struct ahc_softc *ahc) 809 { 810 uint8_t sblkctl; 811 812 ahc_pause(ahc); 813 814 /* No more pending messages. */ 815 ahc_clear_msg_state(ahc); 816 817 ahc_outb(ahc, SCSISIGO, 0); /* De-assert BSY */ 818 ahc_outb(ahc, MSG_OUT, MSG_NOOP); /* No message to send */ 819 ahc_outb(ahc, SXFRCTL1, ahc_inb(ahc, SXFRCTL1) & ~BITBUCKET); 820 ahc_outb(ahc, LASTPHASE, P_BUSFREE); 821 ahc_outb(ahc, SAVED_SCSIID, 0xFF); 822 ahc_outb(ahc, SAVED_LUN, 0xFF); 823 824 /* 825 * Ensure that the sequencer's idea of TQINPOS 826 * matches our own. The sequencer increments TQINPOS 827 * only after it sees a DMA complete and a reset could 828 * occur before the increment leaving the kernel to believe 829 * the command arrived but the sequencer to not. 830 */ 831 ahc_outb(ahc, TQINPOS, ahc->tqinfifonext); 832 833 /* Always allow reselection */ 834 ahc_outb(ahc, SCSISEQ, 835 ahc_inb(ahc, SCSISEQ_TEMPLATE) & (ENSELI|ENRSELI|ENAUTOATNP)); 836 if ((ahc->features & AHC_CMD_CHAN) != 0) { 837 /* Ensure that no DMA operations are in progress */ 838 ahc_outb(ahc, CCSCBCNT, 0); 839 ahc_outb(ahc, CCSGCTL, 0); 840 ahc_outb(ahc, CCSCBCTL, 0); 841 } 842 /* 843 * If we were in the process of DMA'ing SCB data into 844 * an SCB, replace that SCB on the free list. This prevents 845 * an SCB leak. 846 */ 847 if ((ahc_inb(ahc, SEQ_FLAGS2) & SCB_DMA) != 0) { 848 ahc_add_curscb_to_free_list(ahc); 849 ahc_outb(ahc, SEQ_FLAGS2, 850 ahc_inb(ahc, SEQ_FLAGS2) & ~SCB_DMA); 851 } 852 853 /* 854 * Clear any pending sequencer interrupt. It is no 855 * longer relevant since we're resetting the Program 856 * Counter. 857 */ 858 ahc_outb(ahc, CLRINT, CLRSEQINT); 859 860 ahc_outb(ahc, MWI_RESIDUAL, 0); 861 ahc_outb(ahc, SEQCTL, ahc->seqctl); 862 ahc_outb(ahc, SEQADDR0, 0); 863 ahc_outb(ahc, SEQADDR1, 0); 864 865 /* 866 * Take the LED out of diagnostic mode on PM resume, too 867 */ 868 sblkctl = ahc_inb(ahc, SBLKCTL); 869 ahc_outb(ahc, SBLKCTL, (sblkctl & ~(DIAGLEDEN|DIAGLEDON))); 870 871 ahc_unpause(ahc); 872 } 873 874 /************************* Input/Output Queues ********************************/ 875 static void 876 ahc_run_qoutfifo(struct ahc_softc *ahc) 877 { 878 struct scb *scb; 879 u_int scb_index; 880 881 ahc_sync_qoutfifo(ahc, BUS_DMASYNC_POSTREAD); 882 while (ahc->qoutfifo[ahc->qoutfifonext] != SCB_LIST_NULL) { 883 884 scb_index = ahc->qoutfifo[ahc->qoutfifonext]; 885 if ((ahc->qoutfifonext & 0x03) == 0x03) { 886 u_int modnext; 887 888 /* 889 * Clear 32bits of QOUTFIFO at a time 890 * so that we don't clobber an incoming 891 * byte DMA to the array on architectures 892 * that only support 32bit load and store 893 * operations. 894 */ 895 modnext = ahc->qoutfifonext & ~0x3; 896 *((uint32_t *)(&ahc->qoutfifo[modnext])) = 0xFFFFFFFFUL; 897 ahc_dmamap_sync(ahc, ahc->shared_data_dmat, 898 ahc->shared_data_dmamap, 899 /*offset*/modnext, /*len*/4, 900 BUS_DMASYNC_PREREAD); 901 } 902 ahc->qoutfifonext++; 903 904 scb = ahc_lookup_scb(ahc, scb_index); 905 if (scb == NULL) { 906 printk("%s: WARNING no command for scb %d " 907 "(cmdcmplt)\nQOUTPOS = %d\n", 908 ahc_name(ahc), scb_index, 909 (ahc->qoutfifonext - 1) & 0xFF); 910 continue; 911 } 912 913 /* 914 * Save off the residual 915 * if there is one. 916 */ 917 ahc_update_residual(ahc, scb); 918 ahc_done(ahc, scb); 919 } 920 } 921 922 static void 923 ahc_run_untagged_queues(struct ahc_softc *ahc) 924 { 925 int i; 926 927 for (i = 0; i < 16; i++) 928 ahc_run_untagged_queue(ahc, &ahc->untagged_queues[i]); 929 } 930 931 static void 932 ahc_run_untagged_queue(struct ahc_softc *ahc, struct scb_tailq *queue) 933 { 934 struct scb *scb; 935 936 if (ahc->untagged_queue_lock != 0) 937 return; 938 939 if ((scb = TAILQ_FIRST(queue)) != NULL 940 && (scb->flags & SCB_ACTIVE) == 0) { 941 scb->flags |= SCB_ACTIVE; 942 ahc_queue_scb(ahc, scb); 943 } 944 } 945 946 /************************* Interrupt Handling *********************************/ 947 static void 948 ahc_handle_brkadrint(struct ahc_softc *ahc) 949 { 950 /* 951 * We upset the sequencer :-( 952 * Lookup the error message 953 */ 954 int i; 955 int error; 956 957 error = ahc_inb(ahc, ERROR); 958 for (i = 0; error != 1 && i < num_errors; i++) 959 error >>= 1; 960 printk("%s: brkadrint, %s at seqaddr = 0x%x\n", 961 ahc_name(ahc), ahc_hard_errors[i].errmesg, 962 ahc_inb(ahc, SEQADDR0) | 963 (ahc_inb(ahc, SEQADDR1) << 8)); 964 965 ahc_dump_card_state(ahc); 966 967 /* Tell everyone that this HBA is no longer available */ 968 ahc_abort_scbs(ahc, CAM_TARGET_WILDCARD, ALL_CHANNELS, 969 CAM_LUN_WILDCARD, SCB_LIST_NULL, ROLE_UNKNOWN, 970 CAM_NO_HBA); 971 972 /* Disable all interrupt sources by resetting the controller */ 973 ahc_shutdown(ahc); 974 } 975 976 static void 977 ahc_handle_seqint(struct ahc_softc *ahc, u_int intstat) 978 { 979 struct scb *scb; 980 struct ahc_devinfo devinfo; 981 982 ahc_fetch_devinfo(ahc, &devinfo); 983 984 /* 985 * Clear the upper byte that holds SEQINT status 986 * codes and clear the SEQINT bit. We will unpause 987 * the sequencer, if appropriate, after servicing 988 * the request. 989 */ 990 ahc_outb(ahc, CLRINT, CLRSEQINT); 991 switch (intstat & SEQINT_MASK) { 992 case BAD_STATUS: 993 { 994 u_int scb_index; 995 struct hardware_scb *hscb; 996 997 /* 998 * Set the default return value to 0 (don't 999 * send sense). The sense code will change 1000 * this if needed. 1001 */ 1002 ahc_outb(ahc, RETURN_1, 0); 1003 1004 /* 1005 * The sequencer will notify us when a command 1006 * has an error that would be of interest to 1007 * the kernel. This allows us to leave the sequencer 1008 * running in the common case of command completes 1009 * without error. The sequencer will already have 1010 * dma'd the SCB back up to us, so we can reference 1011 * the in kernel copy directly. 1012 */ 1013 scb_index = ahc_inb(ahc, SCB_TAG); 1014 scb = ahc_lookup_scb(ahc, scb_index); 1015 if (scb == NULL) { 1016 ahc_print_devinfo(ahc, &devinfo); 1017 printk("ahc_intr - referenced scb " 1018 "not valid during seqint 0x%x scb(%d)\n", 1019 intstat, scb_index); 1020 ahc_dump_card_state(ahc); 1021 panic("for safety"); 1022 goto unpause; 1023 } 1024 1025 hscb = scb->hscb; 1026 1027 /* Don't want to clobber the original sense code */ 1028 if ((scb->flags & SCB_SENSE) != 0) { 1029 /* 1030 * Clear the SCB_SENSE Flag and have 1031 * the sequencer do a normal command 1032 * complete. 1033 */ 1034 scb->flags &= ~SCB_SENSE; 1035 ahc_set_transaction_status(scb, CAM_AUTOSENSE_FAIL); 1036 break; 1037 } 1038 ahc_set_transaction_status(scb, CAM_SCSI_STATUS_ERROR); 1039 /* Freeze the queue until the client sees the error. */ 1040 ahc_freeze_devq(ahc, scb); 1041 ahc_freeze_scb(scb); 1042 ahc_set_scsi_status(scb, hscb->shared_data.status.scsi_status); 1043 switch (hscb->shared_data.status.scsi_status) { 1044 case SCSI_STATUS_OK: 1045 printk("%s: Interrupted for status of 0???\n", 1046 ahc_name(ahc)); 1047 break; 1048 case SCSI_STATUS_CMD_TERMINATED: 1049 case SCSI_STATUS_CHECK_COND: 1050 { 1051 struct ahc_dma_seg *sg; 1052 struct scsi_sense *sc; 1053 struct ahc_initiator_tinfo *targ_info; 1054 struct ahc_tmode_tstate *tstate; 1055 struct ahc_transinfo *tinfo; 1056 #ifdef AHC_DEBUG 1057 if (ahc_debug & AHC_SHOW_SENSE) { 1058 ahc_print_path(ahc, scb); 1059 printk("SCB %d: requests Check Status\n", 1060 scb->hscb->tag); 1061 } 1062 #endif 1063 1064 if (ahc_perform_autosense(scb) == 0) 1065 break; 1066 1067 targ_info = ahc_fetch_transinfo(ahc, 1068 devinfo.channel, 1069 devinfo.our_scsiid, 1070 devinfo.target, 1071 &tstate); 1072 tinfo = &targ_info->curr; 1073 sg = scb->sg_list; 1074 sc = (struct scsi_sense *)(&hscb->shared_data.cdb); 1075 /* 1076 * Save off the residual if there is one. 1077 */ 1078 ahc_update_residual(ahc, scb); 1079 #ifdef AHC_DEBUG 1080 if (ahc_debug & AHC_SHOW_SENSE) { 1081 ahc_print_path(ahc, scb); 1082 printk("Sending Sense\n"); 1083 } 1084 #endif 1085 sg->addr = ahc_get_sense_bufaddr(ahc, scb); 1086 sg->len = ahc_get_sense_bufsize(ahc, scb); 1087 sg->len |= AHC_DMA_LAST_SEG; 1088 1089 /* Fixup byte order */ 1090 sg->addr = ahc_htole32(sg->addr); 1091 sg->len = ahc_htole32(sg->len); 1092 1093 sc->opcode = REQUEST_SENSE; 1094 sc->byte2 = 0; 1095 if (tinfo->protocol_version <= SCSI_REV_2 1096 && SCB_GET_LUN(scb) < 8) 1097 sc->byte2 = SCB_GET_LUN(scb) << 5; 1098 sc->unused[0] = 0; 1099 sc->unused[1] = 0; 1100 sc->length = sg->len; 1101 sc->control = 0; 1102 1103 /* 1104 * We can't allow the target to disconnect. 1105 * This will be an untagged transaction and 1106 * having the target disconnect will make this 1107 * transaction indestinguishable from outstanding 1108 * tagged transactions. 1109 */ 1110 hscb->control = 0; 1111 1112 /* 1113 * This request sense could be because the 1114 * the device lost power or in some other 1115 * way has lost our transfer negotiations. 1116 * Renegotiate if appropriate. Unit attention 1117 * errors will be reported before any data 1118 * phases occur. 1119 */ 1120 if (ahc_get_residual(scb) 1121 == ahc_get_transfer_length(scb)) { 1122 ahc_update_neg_request(ahc, &devinfo, 1123 tstate, targ_info, 1124 AHC_NEG_IF_NON_ASYNC); 1125 } 1126 if (tstate->auto_negotiate & devinfo.target_mask) { 1127 hscb->control |= MK_MESSAGE; 1128 scb->flags &= ~SCB_NEGOTIATE; 1129 scb->flags |= SCB_AUTO_NEGOTIATE; 1130 } 1131 hscb->cdb_len = sizeof(*sc); 1132 hscb->dataptr = sg->addr; 1133 hscb->datacnt = sg->len; 1134 hscb->sgptr = scb->sg_list_phys | SG_FULL_RESID; 1135 hscb->sgptr = ahc_htole32(hscb->sgptr); 1136 scb->sg_count = 1; 1137 scb->flags |= SCB_SENSE; 1138 ahc_qinfifo_requeue_tail(ahc, scb); 1139 ahc_outb(ahc, RETURN_1, SEND_SENSE); 1140 /* 1141 * Ensure we have enough time to actually 1142 * retrieve the sense. 1143 */ 1144 ahc_scb_timer_reset(scb, 5 * 1000000); 1145 break; 1146 } 1147 default: 1148 break; 1149 } 1150 break; 1151 } 1152 case NO_MATCH: 1153 { 1154 /* Ensure we don't leave the selection hardware on */ 1155 ahc_outb(ahc, SCSISEQ, 1156 ahc_inb(ahc, SCSISEQ) & (ENSELI|ENRSELI|ENAUTOATNP)); 1157 1158 printk("%s:%c:%d: no active SCB for reconnecting " 1159 "target - issuing BUS DEVICE RESET\n", 1160 ahc_name(ahc), devinfo.channel, devinfo.target); 1161 printk("SAVED_SCSIID == 0x%x, SAVED_LUN == 0x%x, " 1162 "ARG_1 == 0x%x ACCUM = 0x%x\n", 1163 ahc_inb(ahc, SAVED_SCSIID), ahc_inb(ahc, SAVED_LUN), 1164 ahc_inb(ahc, ARG_1), ahc_inb(ahc, ACCUM)); 1165 printk("SEQ_FLAGS == 0x%x, SCBPTR == 0x%x, BTT == 0x%x, " 1166 "SINDEX == 0x%x\n", 1167 ahc_inb(ahc, SEQ_FLAGS), ahc_inb(ahc, SCBPTR), 1168 ahc_index_busy_tcl(ahc, 1169 BUILD_TCL(ahc_inb(ahc, SAVED_SCSIID), 1170 ahc_inb(ahc, SAVED_LUN))), 1171 ahc_inb(ahc, SINDEX)); 1172 printk("SCSIID == 0x%x, SCB_SCSIID == 0x%x, SCB_LUN == 0x%x, " 1173 "SCB_TAG == 0x%x, SCB_CONTROL == 0x%x\n", 1174 ahc_inb(ahc, SCSIID), ahc_inb(ahc, SCB_SCSIID), 1175 ahc_inb(ahc, SCB_LUN), ahc_inb(ahc, SCB_TAG), 1176 ahc_inb(ahc, SCB_CONTROL)); 1177 printk("SCSIBUSL == 0x%x, SCSISIGI == 0x%x\n", 1178 ahc_inb(ahc, SCSIBUSL), ahc_inb(ahc, SCSISIGI)); 1179 printk("SXFRCTL0 == 0x%x\n", ahc_inb(ahc, SXFRCTL0)); 1180 printk("SEQCTL == 0x%x\n", ahc_inb(ahc, SEQCTL)); 1181 ahc_dump_card_state(ahc); 1182 ahc->msgout_buf[0] = MSG_BUS_DEV_RESET; 1183 ahc->msgout_len = 1; 1184 ahc->msgout_index = 0; 1185 ahc->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 1186 ahc_outb(ahc, MSG_OUT, HOST_MSG); 1187 ahc_assert_atn(ahc); 1188 break; 1189 } 1190 case SEND_REJECT: 1191 { 1192 u_int rejbyte = ahc_inb(ahc, ACCUM); 1193 printk("%s:%c:%d: Warning - unknown message received from " 1194 "target (0x%x). Rejecting\n", 1195 ahc_name(ahc), devinfo.channel, devinfo.target, rejbyte); 1196 break; 1197 } 1198 case PROTO_VIOLATION: 1199 { 1200 ahc_handle_proto_violation(ahc); 1201 break; 1202 } 1203 case IGN_WIDE_RES: 1204 ahc_handle_ign_wide_residue(ahc, &devinfo); 1205 break; 1206 case PDATA_REINIT: 1207 ahc_reinitialize_dataptrs(ahc); 1208 break; 1209 case BAD_PHASE: 1210 { 1211 u_int lastphase; 1212 1213 lastphase = ahc_inb(ahc, LASTPHASE); 1214 printk("%s:%c:%d: unknown scsi bus phase %x, " 1215 "lastphase = 0x%x. Attempting to continue\n", 1216 ahc_name(ahc), devinfo.channel, devinfo.target, 1217 lastphase, ahc_inb(ahc, SCSISIGI)); 1218 break; 1219 } 1220 case MISSED_BUSFREE: 1221 { 1222 u_int lastphase; 1223 1224 lastphase = ahc_inb(ahc, LASTPHASE); 1225 printk("%s:%c:%d: Missed busfree. " 1226 "Lastphase = 0x%x, Curphase = 0x%x\n", 1227 ahc_name(ahc), devinfo.channel, devinfo.target, 1228 lastphase, ahc_inb(ahc, SCSISIGI)); 1229 ahc_restart(ahc); 1230 return; 1231 } 1232 case HOST_MSG_LOOP: 1233 { 1234 /* 1235 * The sequencer has encountered a message phase 1236 * that requires host assistance for completion. 1237 * While handling the message phase(s), we will be 1238 * notified by the sequencer after each byte is 1239 * transferred so we can track bus phase changes. 1240 * 1241 * If this is the first time we've seen a HOST_MSG_LOOP 1242 * interrupt, initialize the state of the host message 1243 * loop. 1244 */ 1245 if (ahc->msg_type == MSG_TYPE_NONE) { 1246 struct scb *scb; 1247 u_int scb_index; 1248 u_int bus_phase; 1249 1250 bus_phase = ahc_inb(ahc, SCSISIGI) & PHASE_MASK; 1251 if (bus_phase != P_MESGIN 1252 && bus_phase != P_MESGOUT) { 1253 printk("ahc_intr: HOST_MSG_LOOP bad " 1254 "phase 0x%x\n", 1255 bus_phase); 1256 /* 1257 * Probably transitioned to bus free before 1258 * we got here. Just punt the message. 1259 */ 1260 ahc_clear_intstat(ahc); 1261 ahc_restart(ahc); 1262 return; 1263 } 1264 1265 scb_index = ahc_inb(ahc, SCB_TAG); 1266 scb = ahc_lookup_scb(ahc, scb_index); 1267 if (devinfo.role == ROLE_INITIATOR) { 1268 if (bus_phase == P_MESGOUT) { 1269 if (scb == NULL) 1270 panic("HOST_MSG_LOOP with " 1271 "invalid SCB %x\n", 1272 scb_index); 1273 1274 ahc_setup_initiator_msgout(ahc, 1275 &devinfo, 1276 scb); 1277 } else { 1278 ahc->msg_type = 1279 MSG_TYPE_INITIATOR_MSGIN; 1280 ahc->msgin_index = 0; 1281 } 1282 } 1283 #ifdef AHC_TARGET_MODE 1284 else { 1285 if (bus_phase == P_MESGOUT) { 1286 ahc->msg_type = 1287 MSG_TYPE_TARGET_MSGOUT; 1288 ahc->msgin_index = 0; 1289 } 1290 else 1291 ahc_setup_target_msgin(ahc, 1292 &devinfo, 1293 scb); 1294 } 1295 #endif 1296 } 1297 1298 ahc_handle_message_phase(ahc); 1299 break; 1300 } 1301 case PERR_DETECTED: 1302 { 1303 /* 1304 * If we've cleared the parity error interrupt 1305 * but the sequencer still believes that SCSIPERR 1306 * is true, it must be that the parity error is 1307 * for the currently presented byte on the bus, 1308 * and we are not in a phase (data-in) where we will 1309 * eventually ack this byte. Ack the byte and 1310 * throw it away in the hope that the target will 1311 * take us to message out to deliver the appropriate 1312 * error message. 1313 */ 1314 if ((intstat & SCSIINT) == 0 1315 && (ahc_inb(ahc, SSTAT1) & SCSIPERR) != 0) { 1316 1317 if ((ahc->features & AHC_DT) == 0) { 1318 u_int curphase; 1319 1320 /* 1321 * The hardware will only let you ack bytes 1322 * if the expected phase in SCSISIGO matches 1323 * the current phase. Make sure this is 1324 * currently the case. 1325 */ 1326 curphase = ahc_inb(ahc, SCSISIGI) & PHASE_MASK; 1327 ahc_outb(ahc, LASTPHASE, curphase); 1328 ahc_outb(ahc, SCSISIGO, curphase); 1329 } 1330 if ((ahc_inb(ahc, SCSISIGI) & (CDI|MSGI)) == 0) { 1331 int wait; 1332 1333 /* 1334 * In a data phase. Faster to bitbucket 1335 * the data than to individually ack each 1336 * byte. This is also the only strategy 1337 * that will work with AUTOACK enabled. 1338 */ 1339 ahc_outb(ahc, SXFRCTL1, 1340 ahc_inb(ahc, SXFRCTL1) | BITBUCKET); 1341 wait = 5000; 1342 while (--wait != 0) { 1343 if ((ahc_inb(ahc, SCSISIGI) 1344 & (CDI|MSGI)) != 0) 1345 break; 1346 ahc_delay(100); 1347 } 1348 ahc_outb(ahc, SXFRCTL1, 1349 ahc_inb(ahc, SXFRCTL1) & ~BITBUCKET); 1350 if (wait == 0) { 1351 struct scb *scb; 1352 u_int scb_index; 1353 1354 ahc_print_devinfo(ahc, &devinfo); 1355 printk("Unable to clear parity error. " 1356 "Resetting bus.\n"); 1357 scb_index = ahc_inb(ahc, SCB_TAG); 1358 scb = ahc_lookup_scb(ahc, scb_index); 1359 if (scb != NULL) 1360 ahc_set_transaction_status(scb, 1361 CAM_UNCOR_PARITY); 1362 ahc_reset_channel(ahc, devinfo.channel, 1363 /*init reset*/TRUE); 1364 } 1365 } else { 1366 ahc_inb(ahc, SCSIDATL); 1367 } 1368 } 1369 break; 1370 } 1371 case DATA_OVERRUN: 1372 { 1373 /* 1374 * When the sequencer detects an overrun, it 1375 * places the controller in "BITBUCKET" mode 1376 * and allows the target to complete its transfer. 1377 * Unfortunately, none of the counters get updated 1378 * when the controller is in this mode, so we have 1379 * no way of knowing how large the overrun was. 1380 */ 1381 u_int scbindex = ahc_inb(ahc, SCB_TAG); 1382 u_int lastphase = ahc_inb(ahc, LASTPHASE); 1383 u_int i; 1384 1385 scb = ahc_lookup_scb(ahc, scbindex); 1386 for (i = 0; i < num_phases; i++) { 1387 if (lastphase == ahc_phase_table[i].phase) 1388 break; 1389 } 1390 ahc_print_path(ahc, scb); 1391 printk("data overrun detected %s." 1392 " Tag == 0x%x.\n", 1393 ahc_phase_table[i].phasemsg, 1394 scb->hscb->tag); 1395 ahc_print_path(ahc, scb); 1396 printk("%s seen Data Phase. Length = %ld. NumSGs = %d.\n", 1397 ahc_inb(ahc, SEQ_FLAGS) & DPHASE ? "Have" : "Haven't", 1398 ahc_get_transfer_length(scb), scb->sg_count); 1399 if (scb->sg_count > 0) { 1400 for (i = 0; i < scb->sg_count; i++) { 1401 1402 printk("sg[%d] - Addr 0x%x%x : Length %d\n", 1403 i, 1404 (ahc_le32toh(scb->sg_list[i].len) >> 24 1405 & SG_HIGH_ADDR_BITS), 1406 ahc_le32toh(scb->sg_list[i].addr), 1407 ahc_le32toh(scb->sg_list[i].len) 1408 & AHC_SG_LEN_MASK); 1409 } 1410 } 1411 /* 1412 * Set this and it will take effect when the 1413 * target does a command complete. 1414 */ 1415 ahc_freeze_devq(ahc, scb); 1416 if ((scb->flags & SCB_SENSE) == 0) { 1417 ahc_set_transaction_status(scb, CAM_DATA_RUN_ERR); 1418 } else { 1419 scb->flags &= ~SCB_SENSE; 1420 ahc_set_transaction_status(scb, CAM_AUTOSENSE_FAIL); 1421 } 1422 ahc_freeze_scb(scb); 1423 1424 if ((ahc->features & AHC_ULTRA2) != 0) { 1425 /* 1426 * Clear the channel in case we return 1427 * to data phase later. 1428 */ 1429 ahc_outb(ahc, SXFRCTL0, 1430 ahc_inb(ahc, SXFRCTL0) | CLRSTCNT|CLRCHN); 1431 ahc_outb(ahc, SXFRCTL0, 1432 ahc_inb(ahc, SXFRCTL0) | CLRSTCNT|CLRCHN); 1433 } 1434 if ((ahc->flags & AHC_39BIT_ADDRESSING) != 0) { 1435 u_int dscommand1; 1436 1437 /* Ensure HHADDR is 0 for future DMA operations. */ 1438 dscommand1 = ahc_inb(ahc, DSCOMMAND1); 1439 ahc_outb(ahc, DSCOMMAND1, dscommand1 | HADDLDSEL0); 1440 ahc_outb(ahc, HADDR, 0); 1441 ahc_outb(ahc, DSCOMMAND1, dscommand1); 1442 } 1443 break; 1444 } 1445 case MKMSG_FAILED: 1446 { 1447 u_int scbindex; 1448 1449 printk("%s:%c:%d:%d: Attempt to issue message failed\n", 1450 ahc_name(ahc), devinfo.channel, devinfo.target, 1451 devinfo.lun); 1452 scbindex = ahc_inb(ahc, SCB_TAG); 1453 scb = ahc_lookup_scb(ahc, scbindex); 1454 if (scb != NULL 1455 && (scb->flags & SCB_RECOVERY_SCB) != 0) 1456 /* 1457 * Ensure that we didn't put a second instance of this 1458 * SCB into the QINFIFO. 1459 */ 1460 ahc_search_qinfifo(ahc, SCB_GET_TARGET(ahc, scb), 1461 SCB_GET_CHANNEL(ahc, scb), 1462 SCB_GET_LUN(scb), scb->hscb->tag, 1463 ROLE_INITIATOR, /*status*/0, 1464 SEARCH_REMOVE); 1465 break; 1466 } 1467 case NO_FREE_SCB: 1468 { 1469 printk("%s: No free or disconnected SCBs\n", ahc_name(ahc)); 1470 ahc_dump_card_state(ahc); 1471 panic("for safety"); 1472 break; 1473 } 1474 case SCB_MISMATCH: 1475 { 1476 u_int scbptr; 1477 1478 scbptr = ahc_inb(ahc, SCBPTR); 1479 printk("Bogus TAG after DMA. SCBPTR %d, tag %d, our tag %d\n", 1480 scbptr, ahc_inb(ahc, ARG_1), 1481 ahc->scb_data->hscbs[scbptr].tag); 1482 ahc_dump_card_state(ahc); 1483 panic("for safety"); 1484 break; 1485 } 1486 case OUT_OF_RANGE: 1487 { 1488 printk("%s: BTT calculation out of range\n", ahc_name(ahc)); 1489 printk("SAVED_SCSIID == 0x%x, SAVED_LUN == 0x%x, " 1490 "ARG_1 == 0x%x ACCUM = 0x%x\n", 1491 ahc_inb(ahc, SAVED_SCSIID), ahc_inb(ahc, SAVED_LUN), 1492 ahc_inb(ahc, ARG_1), ahc_inb(ahc, ACCUM)); 1493 printk("SEQ_FLAGS == 0x%x, SCBPTR == 0x%x, BTT == 0x%x, " 1494 "SINDEX == 0x%x\n, A == 0x%x\n", 1495 ahc_inb(ahc, SEQ_FLAGS), ahc_inb(ahc, SCBPTR), 1496 ahc_index_busy_tcl(ahc, 1497 BUILD_TCL(ahc_inb(ahc, SAVED_SCSIID), 1498 ahc_inb(ahc, SAVED_LUN))), 1499 ahc_inb(ahc, SINDEX), 1500 ahc_inb(ahc, ACCUM)); 1501 printk("SCSIID == 0x%x, SCB_SCSIID == 0x%x, SCB_LUN == 0x%x, " 1502 "SCB_TAG == 0x%x, SCB_CONTROL == 0x%x\n", 1503 ahc_inb(ahc, SCSIID), ahc_inb(ahc, SCB_SCSIID), 1504 ahc_inb(ahc, SCB_LUN), ahc_inb(ahc, SCB_TAG), 1505 ahc_inb(ahc, SCB_CONTROL)); 1506 printk("SCSIBUSL == 0x%x, SCSISIGI == 0x%x\n", 1507 ahc_inb(ahc, SCSIBUSL), ahc_inb(ahc, SCSISIGI)); 1508 ahc_dump_card_state(ahc); 1509 panic("for safety"); 1510 break; 1511 } 1512 default: 1513 printk("ahc_intr: seqint, " 1514 "intstat == 0x%x, scsisigi = 0x%x\n", 1515 intstat, ahc_inb(ahc, SCSISIGI)); 1516 break; 1517 } 1518 unpause: 1519 /* 1520 * The sequencer is paused immediately on 1521 * a SEQINT, so we should restart it when 1522 * we're done. 1523 */ 1524 ahc_unpause(ahc); 1525 } 1526 1527 static void 1528 ahc_handle_scsiint(struct ahc_softc *ahc, u_int intstat) 1529 { 1530 u_int scb_index; 1531 u_int status0; 1532 u_int status; 1533 struct scb *scb; 1534 char cur_channel; 1535 char intr_channel; 1536 1537 if ((ahc->features & AHC_TWIN) != 0 1538 && ((ahc_inb(ahc, SBLKCTL) & SELBUSB) != 0)) 1539 cur_channel = 'B'; 1540 else 1541 cur_channel = 'A'; 1542 intr_channel = cur_channel; 1543 1544 if ((ahc->features & AHC_ULTRA2) != 0) 1545 status0 = ahc_inb(ahc, SSTAT0) & IOERR; 1546 else 1547 status0 = 0; 1548 status = ahc_inb(ahc, SSTAT1) & (SELTO|SCSIRSTI|BUSFREE|SCSIPERR); 1549 if (status == 0 && status0 == 0) { 1550 if ((ahc->features & AHC_TWIN) != 0) { 1551 /* Try the other channel */ 1552 ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) ^ SELBUSB); 1553 status = ahc_inb(ahc, SSTAT1) 1554 & (SELTO|SCSIRSTI|BUSFREE|SCSIPERR); 1555 intr_channel = (cur_channel == 'A') ? 'B' : 'A'; 1556 } 1557 if (status == 0) { 1558 printk("%s: Spurious SCSI interrupt\n", ahc_name(ahc)); 1559 ahc_outb(ahc, CLRINT, CLRSCSIINT); 1560 ahc_unpause(ahc); 1561 return; 1562 } 1563 } 1564 1565 /* Make sure the sequencer is in a safe location. */ 1566 ahc_clear_critical_section(ahc); 1567 1568 scb_index = ahc_inb(ahc, SCB_TAG); 1569 scb = ahc_lookup_scb(ahc, scb_index); 1570 if (scb != NULL 1571 && (ahc_inb(ahc, SEQ_FLAGS) & NOT_IDENTIFIED) != 0) 1572 scb = NULL; 1573 1574 if ((ahc->features & AHC_ULTRA2) != 0 1575 && (status0 & IOERR) != 0) { 1576 int now_lvd; 1577 1578 now_lvd = ahc_inb(ahc, SBLKCTL) & ENAB40; 1579 printk("%s: Transceiver State Has Changed to %s mode\n", 1580 ahc_name(ahc), now_lvd ? "LVD" : "SE"); 1581 ahc_outb(ahc, CLRSINT0, CLRIOERR); 1582 /* 1583 * When transitioning to SE mode, the reset line 1584 * glitches, triggering an arbitration bug in some 1585 * Ultra2 controllers. This bug is cleared when we 1586 * assert the reset line. Since a reset glitch has 1587 * already occurred with this transition and a 1588 * transceiver state change is handled just like 1589 * a bus reset anyway, asserting the reset line 1590 * ourselves is safe. 1591 */ 1592 ahc_reset_channel(ahc, intr_channel, 1593 /*Initiate Reset*/now_lvd == 0); 1594 } else if ((status & SCSIRSTI) != 0) { 1595 printk("%s: Someone reset channel %c\n", 1596 ahc_name(ahc), intr_channel); 1597 if (intr_channel != cur_channel) 1598 ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) ^ SELBUSB); 1599 ahc_reset_channel(ahc, intr_channel, /*Initiate Reset*/FALSE); 1600 } else if ((status & SCSIPERR) != 0) { 1601 /* 1602 * Determine the bus phase and queue an appropriate message. 1603 * SCSIPERR is latched true as soon as a parity error 1604 * occurs. If the sequencer acked the transfer that 1605 * caused the parity error and the currently presented 1606 * transfer on the bus has correct parity, SCSIPERR will 1607 * be cleared by CLRSCSIPERR. Use this to determine if 1608 * we should look at the last phase the sequencer recorded, 1609 * or the current phase presented on the bus. 1610 */ 1611 struct ahc_devinfo devinfo; 1612 u_int mesg_out; 1613 u_int curphase; 1614 u_int errorphase; 1615 u_int lastphase; 1616 u_int scsirate; 1617 u_int i; 1618 u_int sstat2; 1619 int silent; 1620 1621 lastphase = ahc_inb(ahc, LASTPHASE); 1622 curphase = ahc_inb(ahc, SCSISIGI) & PHASE_MASK; 1623 sstat2 = ahc_inb(ahc, SSTAT2); 1624 ahc_outb(ahc, CLRSINT1, CLRSCSIPERR); 1625 /* 1626 * For all phases save DATA, the sequencer won't 1627 * automatically ack a byte that has a parity error 1628 * in it. So the only way that the current phase 1629 * could be 'data-in' is if the parity error is for 1630 * an already acked byte in the data phase. During 1631 * synchronous data-in transfers, we may actually 1632 * ack bytes before latching the current phase in 1633 * LASTPHASE, leading to the discrepancy between 1634 * curphase and lastphase. 1635 */ 1636 if ((ahc_inb(ahc, SSTAT1) & SCSIPERR) != 0 1637 || curphase == P_DATAIN || curphase == P_DATAIN_DT) 1638 errorphase = curphase; 1639 else 1640 errorphase = lastphase; 1641 1642 for (i = 0; i < num_phases; i++) { 1643 if (errorphase == ahc_phase_table[i].phase) 1644 break; 1645 } 1646 mesg_out = ahc_phase_table[i].mesg_out; 1647 silent = FALSE; 1648 if (scb != NULL) { 1649 if (SCB_IS_SILENT(scb)) 1650 silent = TRUE; 1651 else 1652 ahc_print_path(ahc, scb); 1653 scb->flags |= SCB_TRANSMISSION_ERROR; 1654 } else 1655 printk("%s:%c:%d: ", ahc_name(ahc), intr_channel, 1656 SCSIID_TARGET(ahc, ahc_inb(ahc, SAVED_SCSIID))); 1657 scsirate = ahc_inb(ahc, SCSIRATE); 1658 if (silent == FALSE) { 1659 printk("parity error detected %s. " 1660 "SEQADDR(0x%x) SCSIRATE(0x%x)\n", 1661 ahc_phase_table[i].phasemsg, 1662 ahc_inw(ahc, SEQADDR0), 1663 scsirate); 1664 if ((ahc->features & AHC_DT) != 0) { 1665 if ((sstat2 & CRCVALERR) != 0) 1666 printk("\tCRC Value Mismatch\n"); 1667 if ((sstat2 & CRCENDERR) != 0) 1668 printk("\tNo terminal CRC packet " 1669 "received\n"); 1670 if ((sstat2 & CRCREQERR) != 0) 1671 printk("\tIllegal CRC packet " 1672 "request\n"); 1673 if ((sstat2 & DUAL_EDGE_ERR) != 0) 1674 printk("\tUnexpected %sDT Data Phase\n", 1675 (scsirate & SINGLE_EDGE) 1676 ? "" : "non-"); 1677 } 1678 } 1679 1680 if ((ahc->features & AHC_DT) != 0 1681 && (sstat2 & DUAL_EDGE_ERR) != 0) { 1682 /* 1683 * This error applies regardless of 1684 * data direction, so ignore the value 1685 * in the phase table. 1686 */ 1687 mesg_out = MSG_INITIATOR_DET_ERR; 1688 } 1689 1690 /* 1691 * We've set the hardware to assert ATN if we 1692 * get a parity error on "in" phases, so all we 1693 * need to do is stuff the message buffer with 1694 * the appropriate message. "In" phases have set 1695 * mesg_out to something other than MSG_NOP. 1696 */ 1697 if (mesg_out != MSG_NOOP) { 1698 if (ahc->msg_type != MSG_TYPE_NONE) 1699 ahc->send_msg_perror = TRUE; 1700 else 1701 ahc_outb(ahc, MSG_OUT, mesg_out); 1702 } 1703 /* 1704 * Force a renegotiation with this target just in 1705 * case we are out of sync for some external reason 1706 * unknown (or unreported) by the target. 1707 */ 1708 ahc_fetch_devinfo(ahc, &devinfo); 1709 ahc_force_renegotiation(ahc, &devinfo); 1710 1711 ahc_outb(ahc, CLRINT, CLRSCSIINT); 1712 ahc_unpause(ahc); 1713 } else if ((status & SELTO) != 0) { 1714 u_int scbptr; 1715 1716 /* Stop the selection */ 1717 ahc_outb(ahc, SCSISEQ, 0); 1718 1719 /* No more pending messages */ 1720 ahc_clear_msg_state(ahc); 1721 1722 /* Clear interrupt state */ 1723 ahc_outb(ahc, SIMODE1, ahc_inb(ahc, SIMODE1) & ~ENBUSFREE); 1724 ahc_outb(ahc, CLRSINT1, CLRSELTIMEO|CLRBUSFREE|CLRSCSIPERR); 1725 1726 /* 1727 * Although the driver does not care about the 1728 * 'Selection in Progress' status bit, the busy 1729 * LED does. SELINGO is only cleared by a successful 1730 * selection, so we must manually clear it to insure 1731 * the LED turns off just incase no future successful 1732 * selections occur (e.g. no devices on the bus). 1733 */ 1734 ahc_outb(ahc, CLRSINT0, CLRSELINGO); 1735 1736 scbptr = ahc_inb(ahc, WAITING_SCBH); 1737 ahc_outb(ahc, SCBPTR, scbptr); 1738 scb_index = ahc_inb(ahc, SCB_TAG); 1739 1740 scb = ahc_lookup_scb(ahc, scb_index); 1741 if (scb == NULL) { 1742 printk("%s: ahc_intr - referenced scb not " 1743 "valid during SELTO scb(%d, %d)\n", 1744 ahc_name(ahc), scbptr, scb_index); 1745 ahc_dump_card_state(ahc); 1746 } else { 1747 struct ahc_devinfo devinfo; 1748 #ifdef AHC_DEBUG 1749 if ((ahc_debug & AHC_SHOW_SELTO) != 0) { 1750 ahc_print_path(ahc, scb); 1751 printk("Saw Selection Timeout for SCB 0x%x\n", 1752 scb_index); 1753 } 1754 #endif 1755 ahc_scb_devinfo(ahc, &devinfo, scb); 1756 ahc_set_transaction_status(scb, CAM_SEL_TIMEOUT); 1757 ahc_freeze_devq(ahc, scb); 1758 1759 /* 1760 * Cancel any pending transactions on the device 1761 * now that it seems to be missing. This will 1762 * also revert us to async/narrow transfers until 1763 * we can renegotiate with the device. 1764 */ 1765 ahc_handle_devreset(ahc, &devinfo, 1766 CAM_SEL_TIMEOUT, 1767 "Selection Timeout", 1768 /*verbose_level*/1); 1769 } 1770 ahc_outb(ahc, CLRINT, CLRSCSIINT); 1771 ahc_restart(ahc); 1772 } else if ((status & BUSFREE) != 0 1773 && (ahc_inb(ahc, SIMODE1) & ENBUSFREE) != 0) { 1774 struct ahc_devinfo devinfo; 1775 u_int lastphase; 1776 u_int saved_scsiid; 1777 u_int saved_lun; 1778 u_int target; 1779 u_int initiator_role_id; 1780 char channel; 1781 int printerror; 1782 1783 /* 1784 * Clear our selection hardware as soon as possible. 1785 * We may have an entry in the waiting Q for this target, 1786 * that is affected by this busfree and we don't want to 1787 * go about selecting the target while we handle the event. 1788 */ 1789 ahc_outb(ahc, SCSISEQ, 1790 ahc_inb(ahc, SCSISEQ) & (ENSELI|ENRSELI|ENAUTOATNP)); 1791 1792 /* 1793 * Disable busfree interrupts and clear the busfree 1794 * interrupt status. We do this here so that several 1795 * bus transactions occur prior to clearing the SCSIINT 1796 * latch. It can take a bit for the clearing to take effect. 1797 */ 1798 ahc_outb(ahc, SIMODE1, ahc_inb(ahc, SIMODE1) & ~ENBUSFREE); 1799 ahc_outb(ahc, CLRSINT1, CLRBUSFREE|CLRSCSIPERR); 1800 1801 /* 1802 * Look at what phase we were last in. 1803 * If its message out, chances are pretty good 1804 * that the busfree was in response to one of 1805 * our abort requests. 1806 */ 1807 lastphase = ahc_inb(ahc, LASTPHASE); 1808 saved_scsiid = ahc_inb(ahc, SAVED_SCSIID); 1809 saved_lun = ahc_inb(ahc, SAVED_LUN); 1810 target = SCSIID_TARGET(ahc, saved_scsiid); 1811 initiator_role_id = SCSIID_OUR_ID(saved_scsiid); 1812 channel = SCSIID_CHANNEL(ahc, saved_scsiid); 1813 ahc_compile_devinfo(&devinfo, initiator_role_id, 1814 target, saved_lun, channel, ROLE_INITIATOR); 1815 printerror = 1; 1816 1817 if (lastphase == P_MESGOUT) { 1818 u_int tag; 1819 1820 tag = SCB_LIST_NULL; 1821 if (ahc_sent_msg(ahc, AHCMSG_1B, MSG_ABORT_TAG, TRUE) 1822 || ahc_sent_msg(ahc, AHCMSG_1B, MSG_ABORT, TRUE)) { 1823 if (ahc->msgout_buf[ahc->msgout_index - 1] 1824 == MSG_ABORT_TAG) 1825 tag = scb->hscb->tag; 1826 ahc_print_path(ahc, scb); 1827 printk("SCB %d - Abort%s Completed.\n", 1828 scb->hscb->tag, tag == SCB_LIST_NULL ? 1829 "" : " Tag"); 1830 ahc_abort_scbs(ahc, target, channel, 1831 saved_lun, tag, 1832 ROLE_INITIATOR, 1833 CAM_REQ_ABORTED); 1834 printerror = 0; 1835 } else if (ahc_sent_msg(ahc, AHCMSG_1B, 1836 MSG_BUS_DEV_RESET, TRUE)) { 1837 ahc_compile_devinfo(&devinfo, 1838 initiator_role_id, 1839 target, 1840 CAM_LUN_WILDCARD, 1841 channel, 1842 ROLE_INITIATOR); 1843 ahc_handle_devreset(ahc, &devinfo, 1844 CAM_BDR_SENT, 1845 "Bus Device Reset", 1846 /*verbose_level*/0); 1847 printerror = 0; 1848 } else if (ahc_sent_msg(ahc, AHCMSG_EXT, 1849 MSG_EXT_PPR, FALSE)) { 1850 struct ahc_initiator_tinfo *tinfo; 1851 struct ahc_tmode_tstate *tstate; 1852 1853 /* 1854 * PPR Rejected. Try non-ppr negotiation 1855 * and retry command. 1856 */ 1857 tinfo = ahc_fetch_transinfo(ahc, 1858 devinfo.channel, 1859 devinfo.our_scsiid, 1860 devinfo.target, 1861 &tstate); 1862 tinfo->curr.transport_version = 2; 1863 tinfo->goal.transport_version = 2; 1864 tinfo->goal.ppr_options = 0; 1865 ahc_qinfifo_requeue_tail(ahc, scb); 1866 printerror = 0; 1867 } else if (ahc_sent_msg(ahc, AHCMSG_EXT, 1868 MSG_EXT_WDTR, FALSE)) { 1869 /* 1870 * Negotiation Rejected. Go-narrow and 1871 * retry command. 1872 */ 1873 ahc_set_width(ahc, &devinfo, 1874 MSG_EXT_WDTR_BUS_8_BIT, 1875 AHC_TRANS_CUR|AHC_TRANS_GOAL, 1876 /*paused*/TRUE); 1877 ahc_qinfifo_requeue_tail(ahc, scb); 1878 printerror = 0; 1879 } else if (ahc_sent_msg(ahc, AHCMSG_EXT, 1880 MSG_EXT_SDTR, FALSE)) { 1881 /* 1882 * Negotiation Rejected. Go-async and 1883 * retry command. 1884 */ 1885 ahc_set_syncrate(ahc, &devinfo, 1886 /*syncrate*/NULL, 1887 /*period*/0, /*offset*/0, 1888 /*ppr_options*/0, 1889 AHC_TRANS_CUR|AHC_TRANS_GOAL, 1890 /*paused*/TRUE); 1891 ahc_qinfifo_requeue_tail(ahc, scb); 1892 printerror = 0; 1893 } 1894 } 1895 if (printerror != 0) { 1896 u_int i; 1897 1898 if (scb != NULL) { 1899 u_int tag; 1900 1901 if ((scb->hscb->control & TAG_ENB) != 0) 1902 tag = scb->hscb->tag; 1903 else 1904 tag = SCB_LIST_NULL; 1905 ahc_print_path(ahc, scb); 1906 ahc_abort_scbs(ahc, target, channel, 1907 SCB_GET_LUN(scb), tag, 1908 ROLE_INITIATOR, 1909 CAM_UNEXP_BUSFREE); 1910 } else { 1911 /* 1912 * We had not fully identified this connection, 1913 * so we cannot abort anything. 1914 */ 1915 printk("%s: ", ahc_name(ahc)); 1916 } 1917 for (i = 0; i < num_phases; i++) { 1918 if (lastphase == ahc_phase_table[i].phase) 1919 break; 1920 } 1921 if (lastphase != P_BUSFREE) { 1922 /* 1923 * Renegotiate with this device at the 1924 * next opportunity just in case this busfree 1925 * is due to a negotiation mismatch with the 1926 * device. 1927 */ 1928 ahc_force_renegotiation(ahc, &devinfo); 1929 } 1930 printk("Unexpected busfree %s\n" 1931 "SEQADDR == 0x%x\n", 1932 ahc_phase_table[i].phasemsg, 1933 ahc_inb(ahc, SEQADDR0) 1934 | (ahc_inb(ahc, SEQADDR1) << 8)); 1935 } 1936 ahc_outb(ahc, CLRINT, CLRSCSIINT); 1937 ahc_restart(ahc); 1938 } else { 1939 printk("%s: Missing case in ahc_handle_scsiint. status = %x\n", 1940 ahc_name(ahc), status); 1941 ahc_outb(ahc, CLRINT, CLRSCSIINT); 1942 } 1943 } 1944 1945 /* 1946 * Force renegotiation to occur the next time we initiate 1947 * a command to the current device. 1948 */ 1949 static void 1950 ahc_force_renegotiation(struct ahc_softc *ahc, struct ahc_devinfo *devinfo) 1951 { 1952 struct ahc_initiator_tinfo *targ_info; 1953 struct ahc_tmode_tstate *tstate; 1954 1955 targ_info = ahc_fetch_transinfo(ahc, 1956 devinfo->channel, 1957 devinfo->our_scsiid, 1958 devinfo->target, 1959 &tstate); 1960 ahc_update_neg_request(ahc, devinfo, tstate, 1961 targ_info, AHC_NEG_IF_NON_ASYNC); 1962 } 1963 1964 #define AHC_MAX_STEPS 2000 1965 static void 1966 ahc_clear_critical_section(struct ahc_softc *ahc) 1967 { 1968 int stepping; 1969 int steps; 1970 u_int simode0; 1971 u_int simode1; 1972 1973 if (ahc->num_critical_sections == 0) 1974 return; 1975 1976 stepping = FALSE; 1977 steps = 0; 1978 simode0 = 0; 1979 simode1 = 0; 1980 for (;;) { 1981 struct cs *cs; 1982 u_int seqaddr; 1983 u_int i; 1984 1985 seqaddr = ahc_inb(ahc, SEQADDR0) 1986 | (ahc_inb(ahc, SEQADDR1) << 8); 1987 1988 /* 1989 * Seqaddr represents the next instruction to execute, 1990 * so we are really executing the instruction just 1991 * before it. 1992 */ 1993 if (seqaddr != 0) 1994 seqaddr -= 1; 1995 cs = ahc->critical_sections; 1996 for (i = 0; i < ahc->num_critical_sections; i++, cs++) { 1997 1998 if (cs->begin < seqaddr && cs->end >= seqaddr) 1999 break; 2000 } 2001 2002 if (i == ahc->num_critical_sections) 2003 break; 2004 2005 if (steps > AHC_MAX_STEPS) { 2006 printk("%s: Infinite loop in critical section\n", 2007 ahc_name(ahc)); 2008 ahc_dump_card_state(ahc); 2009 panic("critical section loop"); 2010 } 2011 2012 steps++; 2013 if (stepping == FALSE) { 2014 2015 /* 2016 * Disable all interrupt sources so that the 2017 * sequencer will not be stuck by a pausing 2018 * interrupt condition while we attempt to 2019 * leave a critical section. 2020 */ 2021 simode0 = ahc_inb(ahc, SIMODE0); 2022 ahc_outb(ahc, SIMODE0, 0); 2023 simode1 = ahc_inb(ahc, SIMODE1); 2024 if ((ahc->features & AHC_DT) != 0) 2025 /* 2026 * On DT class controllers, we 2027 * use the enhanced busfree logic. 2028 * Unfortunately we cannot re-enable 2029 * busfree detection within the 2030 * current connection, so we must 2031 * leave it on while single stepping. 2032 */ 2033 ahc_outb(ahc, SIMODE1, simode1 & ENBUSFREE); 2034 else 2035 ahc_outb(ahc, SIMODE1, 0); 2036 ahc_outb(ahc, CLRINT, CLRSCSIINT); 2037 ahc_outb(ahc, SEQCTL, ahc->seqctl | STEP); 2038 stepping = TRUE; 2039 } 2040 if ((ahc->features & AHC_DT) != 0) { 2041 ahc_outb(ahc, CLRSINT1, CLRBUSFREE); 2042 ahc_outb(ahc, CLRINT, CLRSCSIINT); 2043 } 2044 ahc_outb(ahc, HCNTRL, ahc->unpause); 2045 while (!ahc_is_paused(ahc)) 2046 ahc_delay(200); 2047 } 2048 if (stepping) { 2049 ahc_outb(ahc, SIMODE0, simode0); 2050 ahc_outb(ahc, SIMODE1, simode1); 2051 ahc_outb(ahc, SEQCTL, ahc->seqctl); 2052 } 2053 } 2054 2055 /* 2056 * Clear any pending interrupt status. 2057 */ 2058 static void 2059 ahc_clear_intstat(struct ahc_softc *ahc) 2060 { 2061 /* Clear any interrupt conditions this may have caused */ 2062 ahc_outb(ahc, CLRSINT1, CLRSELTIMEO|CLRATNO|CLRSCSIRSTI 2063 |CLRBUSFREE|CLRSCSIPERR|CLRPHASECHG| 2064 CLRREQINIT); 2065 ahc_flush_device_writes(ahc); 2066 ahc_outb(ahc, CLRSINT0, CLRSELDO|CLRSELDI|CLRSELINGO); 2067 ahc_flush_device_writes(ahc); 2068 ahc_outb(ahc, CLRINT, CLRSCSIINT); 2069 ahc_flush_device_writes(ahc); 2070 } 2071 2072 /**************************** Debugging Routines ******************************/ 2073 #ifdef AHC_DEBUG 2074 uint32_t ahc_debug = AHC_DEBUG_OPTS; 2075 #endif 2076 2077 #if 0 /* unused */ 2078 static void 2079 ahc_print_scb(struct scb *scb) 2080 { 2081 int i; 2082 2083 struct hardware_scb *hscb = scb->hscb; 2084 2085 printk("scb:%p control:0x%x scsiid:0x%x lun:%d cdb_len:%d\n", 2086 (void *)scb, 2087 hscb->control, 2088 hscb->scsiid, 2089 hscb->lun, 2090 hscb->cdb_len); 2091 printk("Shared Data: "); 2092 for (i = 0; i < sizeof(hscb->shared_data.cdb); i++) 2093 printk("%#02x", hscb->shared_data.cdb[i]); 2094 printk(" dataptr:%#x datacnt:%#x sgptr:%#x tag:%#x\n", 2095 ahc_le32toh(hscb->dataptr), 2096 ahc_le32toh(hscb->datacnt), 2097 ahc_le32toh(hscb->sgptr), 2098 hscb->tag); 2099 if (scb->sg_count > 0) { 2100 for (i = 0; i < scb->sg_count; i++) { 2101 printk("sg[%d] - Addr 0x%x%x : Length %d\n", 2102 i, 2103 (ahc_le32toh(scb->sg_list[i].len) >> 24 2104 & SG_HIGH_ADDR_BITS), 2105 ahc_le32toh(scb->sg_list[i].addr), 2106 ahc_le32toh(scb->sg_list[i].len)); 2107 } 2108 } 2109 } 2110 #endif 2111 2112 /************************* Transfer Negotiation *******************************/ 2113 /* 2114 * Allocate per target mode instance (ID we respond to as a target) 2115 * transfer negotiation data structures. 2116 */ 2117 static struct ahc_tmode_tstate * 2118 ahc_alloc_tstate(struct ahc_softc *ahc, u_int scsi_id, char channel) 2119 { 2120 struct ahc_tmode_tstate *master_tstate; 2121 struct ahc_tmode_tstate *tstate; 2122 int i; 2123 2124 master_tstate = ahc->enabled_targets[ahc->our_id]; 2125 if (channel == 'B') { 2126 scsi_id += 8; 2127 master_tstate = ahc->enabled_targets[ahc->our_id_b + 8]; 2128 } 2129 if (ahc->enabled_targets[scsi_id] != NULL 2130 && ahc->enabled_targets[scsi_id] != master_tstate) 2131 panic("%s: ahc_alloc_tstate - Target already allocated", 2132 ahc_name(ahc)); 2133 tstate = kmalloc(sizeof(*tstate), GFP_ATOMIC); 2134 if (tstate == NULL) 2135 return (NULL); 2136 2137 /* 2138 * If we have allocated a master tstate, copy user settings from 2139 * the master tstate (taken from SRAM or the EEPROM) for this 2140 * channel, but reset our current and goal settings to async/narrow 2141 * until an initiator talks to us. 2142 */ 2143 if (master_tstate != NULL) { 2144 memcpy(tstate, master_tstate, sizeof(*tstate)); 2145 memset(tstate->enabled_luns, 0, sizeof(tstate->enabled_luns)); 2146 tstate->ultraenb = 0; 2147 for (i = 0; i < AHC_NUM_TARGETS; i++) { 2148 memset(&tstate->transinfo[i].curr, 0, 2149 sizeof(tstate->transinfo[i].curr)); 2150 memset(&tstate->transinfo[i].goal, 0, 2151 sizeof(tstate->transinfo[i].goal)); 2152 } 2153 } else 2154 memset(tstate, 0, sizeof(*tstate)); 2155 ahc->enabled_targets[scsi_id] = tstate; 2156 return (tstate); 2157 } 2158 2159 #ifdef AHC_TARGET_MODE 2160 /* 2161 * Free per target mode instance (ID we respond to as a target) 2162 * transfer negotiation data structures. 2163 */ 2164 static void 2165 ahc_free_tstate(struct ahc_softc *ahc, u_int scsi_id, char channel, int force) 2166 { 2167 struct ahc_tmode_tstate *tstate; 2168 2169 /* 2170 * Don't clean up our "master" tstate. 2171 * It has our default user settings. 2172 */ 2173 if (((channel == 'B' && scsi_id == ahc->our_id_b) 2174 || (channel == 'A' && scsi_id == ahc->our_id)) 2175 && force == FALSE) 2176 return; 2177 2178 if (channel == 'B') 2179 scsi_id += 8; 2180 tstate = ahc->enabled_targets[scsi_id]; 2181 kfree(tstate); 2182 ahc->enabled_targets[scsi_id] = NULL; 2183 } 2184 #endif 2185 2186 /* 2187 * Called when we have an active connection to a target on the bus, 2188 * this function finds the nearest syncrate to the input period limited 2189 * by the capabilities of the bus connectivity of and sync settings for 2190 * the target. 2191 */ 2192 static const struct ahc_syncrate * 2193 ahc_devlimited_syncrate(struct ahc_softc *ahc, 2194 struct ahc_initiator_tinfo *tinfo, 2195 u_int *period, u_int *ppr_options, role_t role) 2196 { 2197 struct ahc_transinfo *transinfo; 2198 u_int maxsync; 2199 2200 if ((ahc->features & AHC_ULTRA2) != 0) { 2201 if ((ahc_inb(ahc, SBLKCTL) & ENAB40) != 0 2202 && (ahc_inb(ahc, SSTAT2) & EXP_ACTIVE) == 0) { 2203 maxsync = AHC_SYNCRATE_DT; 2204 } else { 2205 maxsync = AHC_SYNCRATE_ULTRA; 2206 /* Can't do DT on an SE bus */ 2207 *ppr_options &= ~MSG_EXT_PPR_DT_REQ; 2208 } 2209 } else if ((ahc->features & AHC_ULTRA) != 0) { 2210 maxsync = AHC_SYNCRATE_ULTRA; 2211 } else { 2212 maxsync = AHC_SYNCRATE_FAST; 2213 } 2214 /* 2215 * Never allow a value higher than our current goal 2216 * period otherwise we may allow a target initiated 2217 * negotiation to go above the limit as set by the 2218 * user. In the case of an initiator initiated 2219 * sync negotiation, we limit based on the user 2220 * setting. This allows the system to still accept 2221 * incoming negotiations even if target initiated 2222 * negotiation is not performed. 2223 */ 2224 if (role == ROLE_TARGET) 2225 transinfo = &tinfo->user; 2226 else 2227 transinfo = &tinfo->goal; 2228 *ppr_options &= transinfo->ppr_options; 2229 if (transinfo->width == MSG_EXT_WDTR_BUS_8_BIT) { 2230 maxsync = max(maxsync, (u_int)AHC_SYNCRATE_ULTRA2); 2231 *ppr_options &= ~MSG_EXT_PPR_DT_REQ; 2232 } 2233 if (transinfo->period == 0) { 2234 *period = 0; 2235 *ppr_options = 0; 2236 return (NULL); 2237 } 2238 *period = max(*period, (u_int)transinfo->period); 2239 return (ahc_find_syncrate(ahc, period, ppr_options, maxsync)); 2240 } 2241 2242 /* 2243 * Look up the valid period to SCSIRATE conversion in our table. 2244 * Return the period and offset that should be sent to the target 2245 * if this was the beginning of an SDTR. 2246 */ 2247 const struct ahc_syncrate * 2248 ahc_find_syncrate(struct ahc_softc *ahc, u_int *period, 2249 u_int *ppr_options, u_int maxsync) 2250 { 2251 const struct ahc_syncrate *syncrate; 2252 2253 if ((ahc->features & AHC_DT) == 0) 2254 *ppr_options &= ~MSG_EXT_PPR_DT_REQ; 2255 2256 /* Skip all DT only entries if DT is not available */ 2257 if ((*ppr_options & MSG_EXT_PPR_DT_REQ) == 0 2258 && maxsync < AHC_SYNCRATE_ULTRA2) 2259 maxsync = AHC_SYNCRATE_ULTRA2; 2260 2261 /* Now set the maxsync based on the card capabilities 2262 * DT is already done above */ 2263 if ((ahc->features & (AHC_DT | AHC_ULTRA2)) == 0 2264 && maxsync < AHC_SYNCRATE_ULTRA) 2265 maxsync = AHC_SYNCRATE_ULTRA; 2266 if ((ahc->features & (AHC_DT | AHC_ULTRA2 | AHC_ULTRA)) == 0 2267 && maxsync < AHC_SYNCRATE_FAST) 2268 maxsync = AHC_SYNCRATE_FAST; 2269 2270 for (syncrate = &ahc_syncrates[maxsync]; 2271 syncrate->rate != NULL; 2272 syncrate++) { 2273 2274 /* 2275 * The Ultra2 table doesn't go as low 2276 * as for the Fast/Ultra cards. 2277 */ 2278 if ((ahc->features & AHC_ULTRA2) != 0 2279 && (syncrate->sxfr_u2 == 0)) 2280 break; 2281 2282 if (*period <= syncrate->period) { 2283 /* 2284 * When responding to a target that requests 2285 * sync, the requested rate may fall between 2286 * two rates that we can output, but still be 2287 * a rate that we can receive. Because of this, 2288 * we want to respond to the target with 2289 * the same rate that it sent to us even 2290 * if the period we use to send data to it 2291 * is lower. Only lower the response period 2292 * if we must. 2293 */ 2294 if (syncrate == &ahc_syncrates[maxsync]) 2295 *period = syncrate->period; 2296 2297 /* 2298 * At some speeds, we only support 2299 * ST transfers. 2300 */ 2301 if ((syncrate->sxfr_u2 & ST_SXFR) != 0) 2302 *ppr_options &= ~MSG_EXT_PPR_DT_REQ; 2303 break; 2304 } 2305 } 2306 2307 if ((*period == 0) 2308 || (syncrate->rate == NULL) 2309 || ((ahc->features & AHC_ULTRA2) != 0 2310 && (syncrate->sxfr_u2 == 0))) { 2311 /* Use asynchronous transfers. */ 2312 *period = 0; 2313 syncrate = NULL; 2314 *ppr_options &= ~MSG_EXT_PPR_DT_REQ; 2315 } 2316 return (syncrate); 2317 } 2318 2319 /* 2320 * Convert from an entry in our syncrate table to the SCSI equivalent 2321 * sync "period" factor. 2322 */ 2323 u_int 2324 ahc_find_period(struct ahc_softc *ahc, u_int scsirate, u_int maxsync) 2325 { 2326 const struct ahc_syncrate *syncrate; 2327 2328 if ((ahc->features & AHC_ULTRA2) != 0) 2329 scsirate &= SXFR_ULTRA2; 2330 else 2331 scsirate &= SXFR; 2332 2333 /* now set maxsync based on card capabilities */ 2334 if ((ahc->features & AHC_DT) == 0 && maxsync < AHC_SYNCRATE_ULTRA2) 2335 maxsync = AHC_SYNCRATE_ULTRA2; 2336 if ((ahc->features & (AHC_DT | AHC_ULTRA2)) == 0 2337 && maxsync < AHC_SYNCRATE_ULTRA) 2338 maxsync = AHC_SYNCRATE_ULTRA; 2339 if ((ahc->features & (AHC_DT | AHC_ULTRA2 | AHC_ULTRA)) == 0 2340 && maxsync < AHC_SYNCRATE_FAST) 2341 maxsync = AHC_SYNCRATE_FAST; 2342 2343 2344 syncrate = &ahc_syncrates[maxsync]; 2345 while (syncrate->rate != NULL) { 2346 2347 if ((ahc->features & AHC_ULTRA2) != 0) { 2348 if (syncrate->sxfr_u2 == 0) 2349 break; 2350 else if (scsirate == (syncrate->sxfr_u2 & SXFR_ULTRA2)) 2351 return (syncrate->period); 2352 } else if (scsirate == (syncrate->sxfr & SXFR)) { 2353 return (syncrate->period); 2354 } 2355 syncrate++; 2356 } 2357 return (0); /* async */ 2358 } 2359 2360 /* 2361 * Truncate the given synchronous offset to a value the 2362 * current adapter type and syncrate are capable of. 2363 */ 2364 static void 2365 ahc_validate_offset(struct ahc_softc *ahc, 2366 struct ahc_initiator_tinfo *tinfo, 2367 const struct ahc_syncrate *syncrate, 2368 u_int *offset, int wide, role_t role) 2369 { 2370 u_int maxoffset; 2371 2372 /* Limit offset to what we can do */ 2373 if (syncrate == NULL) { 2374 maxoffset = 0; 2375 } else if ((ahc->features & AHC_ULTRA2) != 0) { 2376 maxoffset = MAX_OFFSET_ULTRA2; 2377 } else { 2378 if (wide) 2379 maxoffset = MAX_OFFSET_16BIT; 2380 else 2381 maxoffset = MAX_OFFSET_8BIT; 2382 } 2383 *offset = min(*offset, maxoffset); 2384 if (tinfo != NULL) { 2385 if (role == ROLE_TARGET) 2386 *offset = min(*offset, (u_int)tinfo->user.offset); 2387 else 2388 *offset = min(*offset, (u_int)tinfo->goal.offset); 2389 } 2390 } 2391 2392 /* 2393 * Truncate the given transfer width parameter to a value the 2394 * current adapter type is capable of. 2395 */ 2396 static void 2397 ahc_validate_width(struct ahc_softc *ahc, struct ahc_initiator_tinfo *tinfo, 2398 u_int *bus_width, role_t role) 2399 { 2400 switch (*bus_width) { 2401 default: 2402 if (ahc->features & AHC_WIDE) { 2403 /* Respond Wide */ 2404 *bus_width = MSG_EXT_WDTR_BUS_16_BIT; 2405 break; 2406 } 2407 fallthrough; 2408 case MSG_EXT_WDTR_BUS_8_BIT: 2409 *bus_width = MSG_EXT_WDTR_BUS_8_BIT; 2410 break; 2411 } 2412 if (tinfo != NULL) { 2413 if (role == ROLE_TARGET) 2414 *bus_width = min((u_int)tinfo->user.width, *bus_width); 2415 else 2416 *bus_width = min((u_int)tinfo->goal.width, *bus_width); 2417 } 2418 } 2419 2420 /* 2421 * Update the bitmask of targets for which the controller should 2422 * negotiate with at the next convenient opportunity. This currently 2423 * means the next time we send the initial identify messages for 2424 * a new transaction. 2425 */ 2426 int 2427 ahc_update_neg_request(struct ahc_softc *ahc, struct ahc_devinfo *devinfo, 2428 struct ahc_tmode_tstate *tstate, 2429 struct ahc_initiator_tinfo *tinfo, ahc_neg_type neg_type) 2430 { 2431 u_int auto_negotiate_orig; 2432 2433 auto_negotiate_orig = tstate->auto_negotiate; 2434 if (neg_type == AHC_NEG_ALWAYS) { 2435 /* 2436 * Force our "current" settings to be 2437 * unknown so that unless a bus reset 2438 * occurs the need to renegotiate is 2439 * recorded persistently. 2440 */ 2441 if ((ahc->features & AHC_WIDE) != 0) 2442 tinfo->curr.width = AHC_WIDTH_UNKNOWN; 2443 tinfo->curr.period = AHC_PERIOD_UNKNOWN; 2444 tinfo->curr.offset = AHC_OFFSET_UNKNOWN; 2445 } 2446 if (tinfo->curr.period != tinfo->goal.period 2447 || tinfo->curr.width != tinfo->goal.width 2448 || tinfo->curr.offset != tinfo->goal.offset 2449 || tinfo->curr.ppr_options != tinfo->goal.ppr_options 2450 || (neg_type == AHC_NEG_IF_NON_ASYNC 2451 && (tinfo->goal.offset != 0 2452 || tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT 2453 || tinfo->goal.ppr_options != 0))) 2454 tstate->auto_negotiate |= devinfo->target_mask; 2455 else 2456 tstate->auto_negotiate &= ~devinfo->target_mask; 2457 2458 return (auto_negotiate_orig != tstate->auto_negotiate); 2459 } 2460 2461 /* 2462 * Update the user/goal/curr tables of synchronous negotiation 2463 * parameters as well as, in the case of a current or active update, 2464 * any data structures on the host controller. In the case of an 2465 * active update, the specified target is currently talking to us on 2466 * the bus, so the transfer parameter update must take effect 2467 * immediately. 2468 */ 2469 void 2470 ahc_set_syncrate(struct ahc_softc *ahc, struct ahc_devinfo *devinfo, 2471 const struct ahc_syncrate *syncrate, u_int period, 2472 u_int offset, u_int ppr_options, u_int type, int paused) 2473 { 2474 struct ahc_initiator_tinfo *tinfo; 2475 struct ahc_tmode_tstate *tstate; 2476 u_int old_period; 2477 u_int old_offset; 2478 u_int old_ppr; 2479 int active; 2480 int update_needed; 2481 2482 active = (type & AHC_TRANS_ACTIVE) == AHC_TRANS_ACTIVE; 2483 update_needed = 0; 2484 2485 if (syncrate == NULL) { 2486 period = 0; 2487 offset = 0; 2488 } 2489 2490 tinfo = ahc_fetch_transinfo(ahc, devinfo->channel, devinfo->our_scsiid, 2491 devinfo->target, &tstate); 2492 2493 if ((type & AHC_TRANS_USER) != 0) { 2494 tinfo->user.period = period; 2495 tinfo->user.offset = offset; 2496 tinfo->user.ppr_options = ppr_options; 2497 } 2498 2499 if ((type & AHC_TRANS_GOAL) != 0) { 2500 tinfo->goal.period = period; 2501 tinfo->goal.offset = offset; 2502 tinfo->goal.ppr_options = ppr_options; 2503 } 2504 2505 old_period = tinfo->curr.period; 2506 old_offset = tinfo->curr.offset; 2507 old_ppr = tinfo->curr.ppr_options; 2508 2509 if ((type & AHC_TRANS_CUR) != 0 2510 && (old_period != period 2511 || old_offset != offset 2512 || old_ppr != ppr_options)) { 2513 u_int scsirate; 2514 2515 update_needed++; 2516 scsirate = tinfo->scsirate; 2517 if ((ahc->features & AHC_ULTRA2) != 0) { 2518 2519 scsirate &= ~(SXFR_ULTRA2|SINGLE_EDGE|ENABLE_CRC); 2520 if (syncrate != NULL) { 2521 scsirate |= syncrate->sxfr_u2; 2522 if ((ppr_options & MSG_EXT_PPR_DT_REQ) != 0) 2523 scsirate |= ENABLE_CRC; 2524 else 2525 scsirate |= SINGLE_EDGE; 2526 } 2527 } else { 2528 2529 scsirate &= ~(SXFR|SOFS); 2530 /* 2531 * Ensure Ultra mode is set properly for 2532 * this target. 2533 */ 2534 tstate->ultraenb &= ~devinfo->target_mask; 2535 if (syncrate != NULL) { 2536 if (syncrate->sxfr & ULTRA_SXFR) { 2537 tstate->ultraenb |= 2538 devinfo->target_mask; 2539 } 2540 scsirate |= syncrate->sxfr & SXFR; 2541 scsirate |= offset & SOFS; 2542 } 2543 if (active) { 2544 u_int sxfrctl0; 2545 2546 sxfrctl0 = ahc_inb(ahc, SXFRCTL0); 2547 sxfrctl0 &= ~FAST20; 2548 if (tstate->ultraenb & devinfo->target_mask) 2549 sxfrctl0 |= FAST20; 2550 ahc_outb(ahc, SXFRCTL0, sxfrctl0); 2551 } 2552 } 2553 if (active) { 2554 ahc_outb(ahc, SCSIRATE, scsirate); 2555 if ((ahc->features & AHC_ULTRA2) != 0) 2556 ahc_outb(ahc, SCSIOFFSET, offset); 2557 } 2558 2559 tinfo->scsirate = scsirate; 2560 tinfo->curr.period = period; 2561 tinfo->curr.offset = offset; 2562 tinfo->curr.ppr_options = ppr_options; 2563 2564 ahc_send_async(ahc, devinfo->channel, devinfo->target, 2565 CAM_LUN_WILDCARD, AC_TRANSFER_NEG); 2566 if (bootverbose) { 2567 if (offset != 0) { 2568 printk("%s: target %d synchronous at %sMHz%s, " 2569 "offset = 0x%x\n", ahc_name(ahc), 2570 devinfo->target, syncrate->rate, 2571 (ppr_options & MSG_EXT_PPR_DT_REQ) 2572 ? " DT" : "", offset); 2573 } else { 2574 printk("%s: target %d using " 2575 "asynchronous transfers\n", 2576 ahc_name(ahc), devinfo->target); 2577 } 2578 } 2579 } 2580 2581 update_needed += ahc_update_neg_request(ahc, devinfo, tstate, 2582 tinfo, AHC_NEG_TO_GOAL); 2583 2584 if (update_needed) 2585 ahc_update_pending_scbs(ahc); 2586 } 2587 2588 /* 2589 * Update the user/goal/curr tables of wide negotiation 2590 * parameters as well as, in the case of a current or active update, 2591 * any data structures on the host controller. In the case of an 2592 * active update, the specified target is currently talking to us on 2593 * the bus, so the transfer parameter update must take effect 2594 * immediately. 2595 */ 2596 void 2597 ahc_set_width(struct ahc_softc *ahc, struct ahc_devinfo *devinfo, 2598 u_int width, u_int type, int paused) 2599 { 2600 struct ahc_initiator_tinfo *tinfo; 2601 struct ahc_tmode_tstate *tstate; 2602 u_int oldwidth; 2603 int active; 2604 int update_needed; 2605 2606 active = (type & AHC_TRANS_ACTIVE) == AHC_TRANS_ACTIVE; 2607 update_needed = 0; 2608 tinfo = ahc_fetch_transinfo(ahc, devinfo->channel, devinfo->our_scsiid, 2609 devinfo->target, &tstate); 2610 2611 if ((type & AHC_TRANS_USER) != 0) 2612 tinfo->user.width = width; 2613 2614 if ((type & AHC_TRANS_GOAL) != 0) 2615 tinfo->goal.width = width; 2616 2617 oldwidth = tinfo->curr.width; 2618 if ((type & AHC_TRANS_CUR) != 0 && oldwidth != width) { 2619 u_int scsirate; 2620 2621 update_needed++; 2622 scsirate = tinfo->scsirate; 2623 scsirate &= ~WIDEXFER; 2624 if (width == MSG_EXT_WDTR_BUS_16_BIT) 2625 scsirate |= WIDEXFER; 2626 2627 tinfo->scsirate = scsirate; 2628 2629 if (active) 2630 ahc_outb(ahc, SCSIRATE, scsirate); 2631 2632 tinfo->curr.width = width; 2633 2634 ahc_send_async(ahc, devinfo->channel, devinfo->target, 2635 CAM_LUN_WILDCARD, AC_TRANSFER_NEG); 2636 if (bootverbose) { 2637 printk("%s: target %d using %dbit transfers\n", 2638 ahc_name(ahc), devinfo->target, 2639 8 * (0x01 << width)); 2640 } 2641 } 2642 2643 update_needed += ahc_update_neg_request(ahc, devinfo, tstate, 2644 tinfo, AHC_NEG_TO_GOAL); 2645 if (update_needed) 2646 ahc_update_pending_scbs(ahc); 2647 } 2648 2649 /* 2650 * Update the current state of tagged queuing for a given target. 2651 */ 2652 static void 2653 ahc_set_tags(struct ahc_softc *ahc, struct scsi_cmnd *cmd, 2654 struct ahc_devinfo *devinfo, ahc_queue_alg alg) 2655 { 2656 struct scsi_device *sdev = cmd->device; 2657 2658 ahc_platform_set_tags(ahc, sdev, devinfo, alg); 2659 ahc_send_async(ahc, devinfo->channel, devinfo->target, 2660 devinfo->lun, AC_TRANSFER_NEG); 2661 } 2662 2663 /* 2664 * When the transfer settings for a connection change, update any 2665 * in-transit SCBs to contain the new data so the hardware will 2666 * be set correctly during future (re)selections. 2667 */ 2668 static void 2669 ahc_update_pending_scbs(struct ahc_softc *ahc) 2670 { 2671 struct scb *pending_scb; 2672 int pending_scb_count; 2673 int i; 2674 int paused; 2675 u_int saved_scbptr; 2676 2677 /* 2678 * Traverse the pending SCB list and ensure that all of the 2679 * SCBs there have the proper settings. 2680 */ 2681 pending_scb_count = 0; 2682 LIST_FOREACH(pending_scb, &ahc->pending_scbs, pending_links) { 2683 struct ahc_devinfo devinfo; 2684 struct hardware_scb *pending_hscb; 2685 struct ahc_initiator_tinfo *tinfo; 2686 struct ahc_tmode_tstate *tstate; 2687 2688 ahc_scb_devinfo(ahc, &devinfo, pending_scb); 2689 tinfo = ahc_fetch_transinfo(ahc, devinfo.channel, 2690 devinfo.our_scsiid, 2691 devinfo.target, &tstate); 2692 pending_hscb = pending_scb->hscb; 2693 pending_hscb->control &= ~ULTRAENB; 2694 if ((tstate->ultraenb & devinfo.target_mask) != 0) 2695 pending_hscb->control |= ULTRAENB; 2696 pending_hscb->scsirate = tinfo->scsirate; 2697 pending_hscb->scsioffset = tinfo->curr.offset; 2698 if ((tstate->auto_negotiate & devinfo.target_mask) == 0 2699 && (pending_scb->flags & SCB_AUTO_NEGOTIATE) != 0) { 2700 pending_scb->flags &= ~SCB_AUTO_NEGOTIATE; 2701 pending_hscb->control &= ~MK_MESSAGE; 2702 } 2703 ahc_sync_scb(ahc, pending_scb, 2704 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 2705 pending_scb_count++; 2706 } 2707 2708 if (pending_scb_count == 0) 2709 return; 2710 2711 if (ahc_is_paused(ahc)) { 2712 paused = 1; 2713 } else { 2714 paused = 0; 2715 ahc_pause(ahc); 2716 } 2717 2718 saved_scbptr = ahc_inb(ahc, SCBPTR); 2719 /* Ensure that the hscbs down on the card match the new information */ 2720 for (i = 0; i < ahc->scb_data->maxhscbs; i++) { 2721 struct hardware_scb *pending_hscb; 2722 u_int control; 2723 u_int scb_tag; 2724 2725 ahc_outb(ahc, SCBPTR, i); 2726 scb_tag = ahc_inb(ahc, SCB_TAG); 2727 pending_scb = ahc_lookup_scb(ahc, scb_tag); 2728 if (pending_scb == NULL) 2729 continue; 2730 2731 pending_hscb = pending_scb->hscb; 2732 control = ahc_inb(ahc, SCB_CONTROL); 2733 control &= ~(ULTRAENB|MK_MESSAGE); 2734 control |= pending_hscb->control & (ULTRAENB|MK_MESSAGE); 2735 ahc_outb(ahc, SCB_CONTROL, control); 2736 ahc_outb(ahc, SCB_SCSIRATE, pending_hscb->scsirate); 2737 ahc_outb(ahc, SCB_SCSIOFFSET, pending_hscb->scsioffset); 2738 } 2739 ahc_outb(ahc, SCBPTR, saved_scbptr); 2740 2741 if (paused == 0) 2742 ahc_unpause(ahc); 2743 } 2744 2745 /**************************** Pathing Information *****************************/ 2746 static void 2747 ahc_fetch_devinfo(struct ahc_softc *ahc, struct ahc_devinfo *devinfo) 2748 { 2749 u_int saved_scsiid; 2750 role_t role; 2751 int our_id; 2752 2753 if (ahc_inb(ahc, SSTAT0) & TARGET) 2754 role = ROLE_TARGET; 2755 else 2756 role = ROLE_INITIATOR; 2757 2758 if (role == ROLE_TARGET 2759 && (ahc->features & AHC_MULTI_TID) != 0 2760 && (ahc_inb(ahc, SEQ_FLAGS) 2761 & (CMDPHASE_PENDING|TARG_CMD_PENDING|NO_DISCONNECT)) != 0) { 2762 /* We were selected, so pull our id from TARGIDIN */ 2763 our_id = ahc_inb(ahc, TARGIDIN) & OID; 2764 } else if ((ahc->features & AHC_ULTRA2) != 0) 2765 our_id = ahc_inb(ahc, SCSIID_ULTRA2) & OID; 2766 else 2767 our_id = ahc_inb(ahc, SCSIID) & OID; 2768 2769 saved_scsiid = ahc_inb(ahc, SAVED_SCSIID); 2770 ahc_compile_devinfo(devinfo, 2771 our_id, 2772 SCSIID_TARGET(ahc, saved_scsiid), 2773 ahc_inb(ahc, SAVED_LUN), 2774 SCSIID_CHANNEL(ahc, saved_scsiid), 2775 role); 2776 } 2777 2778 static const struct ahc_phase_table_entry* 2779 ahc_lookup_phase_entry(int phase) 2780 { 2781 const struct ahc_phase_table_entry *entry; 2782 const struct ahc_phase_table_entry *last_entry; 2783 2784 /* 2785 * num_phases doesn't include the default entry which 2786 * will be returned if the phase doesn't match. 2787 */ 2788 last_entry = &ahc_phase_table[num_phases]; 2789 for (entry = ahc_phase_table; entry < last_entry; entry++) { 2790 if (phase == entry->phase) 2791 break; 2792 } 2793 return (entry); 2794 } 2795 2796 void 2797 ahc_compile_devinfo(struct ahc_devinfo *devinfo, u_int our_id, u_int target, 2798 u_int lun, char channel, role_t role) 2799 { 2800 devinfo->our_scsiid = our_id; 2801 devinfo->target = target; 2802 devinfo->lun = lun; 2803 devinfo->target_offset = target; 2804 devinfo->channel = channel; 2805 devinfo->role = role; 2806 if (channel == 'B') 2807 devinfo->target_offset += 8; 2808 devinfo->target_mask = (0x01 << devinfo->target_offset); 2809 } 2810 2811 void 2812 ahc_print_devinfo(struct ahc_softc *ahc, struct ahc_devinfo *devinfo) 2813 { 2814 printk("%s:%c:%d:%d: ", ahc_name(ahc), devinfo->channel, 2815 devinfo->target, devinfo->lun); 2816 } 2817 2818 static void 2819 ahc_scb_devinfo(struct ahc_softc *ahc, struct ahc_devinfo *devinfo, 2820 struct scb *scb) 2821 { 2822 role_t role; 2823 int our_id; 2824 2825 our_id = SCSIID_OUR_ID(scb->hscb->scsiid); 2826 role = ROLE_INITIATOR; 2827 if ((scb->flags & SCB_TARGET_SCB) != 0) 2828 role = ROLE_TARGET; 2829 ahc_compile_devinfo(devinfo, our_id, SCB_GET_TARGET(ahc, scb), 2830 SCB_GET_LUN(scb), SCB_GET_CHANNEL(ahc, scb), role); 2831 } 2832 2833 2834 /************************ Message Phase Processing ****************************/ 2835 static void 2836 ahc_assert_atn(struct ahc_softc *ahc) 2837 { 2838 u_int scsisigo; 2839 2840 scsisigo = ATNO; 2841 if ((ahc->features & AHC_DT) == 0) 2842 scsisigo |= ahc_inb(ahc, SCSISIGI); 2843 ahc_outb(ahc, SCSISIGO, scsisigo); 2844 } 2845 2846 /* 2847 * When an initiator transaction with the MK_MESSAGE flag either reconnects 2848 * or enters the initial message out phase, we are interrupted. Fill our 2849 * outgoing message buffer with the appropriate message and beging handing 2850 * the message phase(s) manually. 2851 */ 2852 static void 2853 ahc_setup_initiator_msgout(struct ahc_softc *ahc, struct ahc_devinfo *devinfo, 2854 struct scb *scb) 2855 { 2856 /* 2857 * To facilitate adding multiple messages together, 2858 * each routine should increment the index and len 2859 * variables instead of setting them explicitly. 2860 */ 2861 ahc->msgout_index = 0; 2862 ahc->msgout_len = 0; 2863 2864 if ((scb->flags & SCB_DEVICE_RESET) == 0 2865 && ahc_inb(ahc, MSG_OUT) == MSG_IDENTIFYFLAG) { 2866 u_int identify_msg; 2867 2868 identify_msg = MSG_IDENTIFYFLAG | SCB_GET_LUN(scb); 2869 if ((scb->hscb->control & DISCENB) != 0) 2870 identify_msg |= MSG_IDENTIFY_DISCFLAG; 2871 ahc->msgout_buf[ahc->msgout_index++] = identify_msg; 2872 ahc->msgout_len++; 2873 2874 if ((scb->hscb->control & TAG_ENB) != 0) { 2875 ahc->msgout_buf[ahc->msgout_index++] = 2876 scb->hscb->control & (TAG_ENB|SCB_TAG_TYPE); 2877 ahc->msgout_buf[ahc->msgout_index++] = scb->hscb->tag; 2878 ahc->msgout_len += 2; 2879 } 2880 } 2881 2882 if (scb->flags & SCB_DEVICE_RESET) { 2883 ahc->msgout_buf[ahc->msgout_index++] = MSG_BUS_DEV_RESET; 2884 ahc->msgout_len++; 2885 ahc_print_path(ahc, scb); 2886 printk("Bus Device Reset Message Sent\n"); 2887 /* 2888 * Clear our selection hardware in advance of 2889 * the busfree. We may have an entry in the waiting 2890 * Q for this target, and we don't want to go about 2891 * selecting while we handle the busfree and blow it 2892 * away. 2893 */ 2894 ahc_outb(ahc, SCSISEQ, (ahc_inb(ahc, SCSISEQ) & ~ENSELO)); 2895 } else if ((scb->flags & SCB_ABORT) != 0) { 2896 if ((scb->hscb->control & TAG_ENB) != 0) 2897 ahc->msgout_buf[ahc->msgout_index++] = MSG_ABORT_TAG; 2898 else 2899 ahc->msgout_buf[ahc->msgout_index++] = MSG_ABORT; 2900 ahc->msgout_len++; 2901 ahc_print_path(ahc, scb); 2902 printk("Abort%s Message Sent\n", 2903 (scb->hscb->control & TAG_ENB) != 0 ? " Tag" : ""); 2904 /* 2905 * Clear our selection hardware in advance of 2906 * the busfree. We may have an entry in the waiting 2907 * Q for this target, and we don't want to go about 2908 * selecting while we handle the busfree and blow it 2909 * away. 2910 */ 2911 ahc_outb(ahc, SCSISEQ, (ahc_inb(ahc, SCSISEQ) & ~ENSELO)); 2912 } else if ((scb->flags & (SCB_AUTO_NEGOTIATE|SCB_NEGOTIATE)) != 0) { 2913 ahc_build_transfer_msg(ahc, devinfo); 2914 } else { 2915 printk("ahc_intr: AWAITING_MSG for an SCB that " 2916 "does not have a waiting message\n"); 2917 printk("SCSIID = %x, target_mask = %x\n", scb->hscb->scsiid, 2918 devinfo->target_mask); 2919 panic("SCB = %d, SCB Control = %x, MSG_OUT = %x " 2920 "SCB flags = %x", scb->hscb->tag, scb->hscb->control, 2921 ahc_inb(ahc, MSG_OUT), scb->flags); 2922 } 2923 2924 /* 2925 * Clear the MK_MESSAGE flag from the SCB so we aren't 2926 * asked to send this message again. 2927 */ 2928 ahc_outb(ahc, SCB_CONTROL, ahc_inb(ahc, SCB_CONTROL) & ~MK_MESSAGE); 2929 scb->hscb->control &= ~MK_MESSAGE; 2930 ahc->msgout_index = 0; 2931 ahc->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 2932 } 2933 2934 /* 2935 * Build an appropriate transfer negotiation message for the 2936 * currently active target. 2937 */ 2938 static void 2939 ahc_build_transfer_msg(struct ahc_softc *ahc, struct ahc_devinfo *devinfo) 2940 { 2941 /* 2942 * We need to initiate transfer negotiations. 2943 * If our current and goal settings are identical, 2944 * we want to renegotiate due to a check condition. 2945 */ 2946 struct ahc_initiator_tinfo *tinfo; 2947 struct ahc_tmode_tstate *tstate; 2948 const struct ahc_syncrate *rate; 2949 int dowide; 2950 int dosync; 2951 int doppr; 2952 u_int period; 2953 u_int ppr_options; 2954 u_int offset; 2955 2956 tinfo = ahc_fetch_transinfo(ahc, devinfo->channel, devinfo->our_scsiid, 2957 devinfo->target, &tstate); 2958 /* 2959 * Filter our period based on the current connection. 2960 * If we can't perform DT transfers on this segment (not in LVD 2961 * mode for instance), then our decision to issue a PPR message 2962 * may change. 2963 */ 2964 period = tinfo->goal.period; 2965 offset = tinfo->goal.offset; 2966 ppr_options = tinfo->goal.ppr_options; 2967 /* Target initiated PPR is not allowed in the SCSI spec */ 2968 if (devinfo->role == ROLE_TARGET) 2969 ppr_options = 0; 2970 rate = ahc_devlimited_syncrate(ahc, tinfo, &period, 2971 &ppr_options, devinfo->role); 2972 dowide = tinfo->curr.width != tinfo->goal.width; 2973 dosync = tinfo->curr.offset != offset || tinfo->curr.period != period; 2974 /* 2975 * Only use PPR if we have options that need it, even if the device 2976 * claims to support it. There might be an expander in the way 2977 * that doesn't. 2978 */ 2979 doppr = ppr_options != 0; 2980 2981 if (!dowide && !dosync && !doppr) { 2982 dowide = tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT; 2983 dosync = tinfo->goal.offset != 0; 2984 } 2985 2986 if (!dowide && !dosync && !doppr) { 2987 /* 2988 * Force async with a WDTR message if we have a wide bus, 2989 * or just issue an SDTR with a 0 offset. 2990 */ 2991 if ((ahc->features & AHC_WIDE) != 0) 2992 dowide = 1; 2993 else 2994 dosync = 1; 2995 2996 if (bootverbose) { 2997 ahc_print_devinfo(ahc, devinfo); 2998 printk("Ensuring async\n"); 2999 } 3000 } 3001 3002 /* Target initiated PPR is not allowed in the SCSI spec */ 3003 if (devinfo->role == ROLE_TARGET) 3004 doppr = 0; 3005 3006 /* 3007 * Both the PPR message and SDTR message require the 3008 * goal syncrate to be limited to what the target device 3009 * is capable of handling (based on whether an LVD->SE 3010 * expander is on the bus), so combine these two cases. 3011 * Regardless, guarantee that if we are using WDTR and SDTR 3012 * messages that WDTR comes first. 3013 */ 3014 if (doppr || (dosync && !dowide)) { 3015 3016 offset = tinfo->goal.offset; 3017 ahc_validate_offset(ahc, tinfo, rate, &offset, 3018 doppr ? tinfo->goal.width 3019 : tinfo->curr.width, 3020 devinfo->role); 3021 if (doppr) { 3022 ahc_construct_ppr(ahc, devinfo, period, offset, 3023 tinfo->goal.width, ppr_options); 3024 } else { 3025 ahc_construct_sdtr(ahc, devinfo, period, offset); 3026 } 3027 } else { 3028 ahc_construct_wdtr(ahc, devinfo, tinfo->goal.width); 3029 } 3030 } 3031 3032 /* 3033 * Build a synchronous negotiation message in our message 3034 * buffer based on the input parameters. 3035 */ 3036 static void 3037 ahc_construct_sdtr(struct ahc_softc *ahc, struct ahc_devinfo *devinfo, 3038 u_int period, u_int offset) 3039 { 3040 if (offset == 0) 3041 period = AHC_ASYNC_XFER_PERIOD; 3042 ahc->msgout_index += spi_populate_sync_msg( 3043 ahc->msgout_buf + ahc->msgout_index, period, offset); 3044 ahc->msgout_len += 5; 3045 if (bootverbose) { 3046 printk("(%s:%c:%d:%d): Sending SDTR period %x, offset %x\n", 3047 ahc_name(ahc), devinfo->channel, devinfo->target, 3048 devinfo->lun, period, offset); 3049 } 3050 } 3051 3052 /* 3053 * Build a wide negotiation message in our message 3054 * buffer based on the input parameters. 3055 */ 3056 static void 3057 ahc_construct_wdtr(struct ahc_softc *ahc, struct ahc_devinfo *devinfo, 3058 u_int bus_width) 3059 { 3060 ahc->msgout_index += spi_populate_width_msg( 3061 ahc->msgout_buf + ahc->msgout_index, bus_width); 3062 ahc->msgout_len += 4; 3063 if (bootverbose) { 3064 printk("(%s:%c:%d:%d): Sending WDTR %x\n", 3065 ahc_name(ahc), devinfo->channel, devinfo->target, 3066 devinfo->lun, bus_width); 3067 } 3068 } 3069 3070 /* 3071 * Build a parallel protocol request message in our message 3072 * buffer based on the input parameters. 3073 */ 3074 static void 3075 ahc_construct_ppr(struct ahc_softc *ahc, struct ahc_devinfo *devinfo, 3076 u_int period, u_int offset, u_int bus_width, 3077 u_int ppr_options) 3078 { 3079 if (offset == 0) 3080 period = AHC_ASYNC_XFER_PERIOD; 3081 ahc->msgout_index += spi_populate_ppr_msg( 3082 ahc->msgout_buf + ahc->msgout_index, period, offset, 3083 bus_width, ppr_options); 3084 ahc->msgout_len += 8; 3085 if (bootverbose) { 3086 printk("(%s:%c:%d:%d): Sending PPR bus_width %x, period %x, " 3087 "offset %x, ppr_options %x\n", ahc_name(ahc), 3088 devinfo->channel, devinfo->target, devinfo->lun, 3089 bus_width, period, offset, ppr_options); 3090 } 3091 } 3092 3093 /* 3094 * Clear any active message state. 3095 */ 3096 static void 3097 ahc_clear_msg_state(struct ahc_softc *ahc) 3098 { 3099 ahc->msgout_len = 0; 3100 ahc->msgin_index = 0; 3101 ahc->msg_type = MSG_TYPE_NONE; 3102 if ((ahc_inb(ahc, SCSISIGI) & ATNI) != 0) { 3103 /* 3104 * The target didn't care to respond to our 3105 * message request, so clear ATN. 3106 */ 3107 ahc_outb(ahc, CLRSINT1, CLRATNO); 3108 } 3109 ahc_outb(ahc, MSG_OUT, MSG_NOOP); 3110 ahc_outb(ahc, SEQ_FLAGS2, 3111 ahc_inb(ahc, SEQ_FLAGS2) & ~TARGET_MSG_PENDING); 3112 } 3113 3114 static void 3115 ahc_handle_proto_violation(struct ahc_softc *ahc) 3116 { 3117 struct ahc_devinfo devinfo; 3118 struct scb *scb; 3119 u_int scbid; 3120 u_int seq_flags; 3121 u_int curphase; 3122 u_int lastphase; 3123 int found; 3124 3125 ahc_fetch_devinfo(ahc, &devinfo); 3126 scbid = ahc_inb(ahc, SCB_TAG); 3127 scb = ahc_lookup_scb(ahc, scbid); 3128 seq_flags = ahc_inb(ahc, SEQ_FLAGS); 3129 curphase = ahc_inb(ahc, SCSISIGI) & PHASE_MASK; 3130 lastphase = ahc_inb(ahc, LASTPHASE); 3131 if ((seq_flags & NOT_IDENTIFIED) != 0) { 3132 3133 /* 3134 * The reconnecting target either did not send an 3135 * identify message, or did, but we didn't find an SCB 3136 * to match. 3137 */ 3138 ahc_print_devinfo(ahc, &devinfo); 3139 printk("Target did not send an IDENTIFY message. " 3140 "LASTPHASE = 0x%x.\n", lastphase); 3141 scb = NULL; 3142 } else if (scb == NULL) { 3143 /* 3144 * We don't seem to have an SCB active for this 3145 * transaction. Print an error and reset the bus. 3146 */ 3147 ahc_print_devinfo(ahc, &devinfo); 3148 printk("No SCB found during protocol violation\n"); 3149 goto proto_violation_reset; 3150 } else { 3151 ahc_set_transaction_status(scb, CAM_SEQUENCE_FAIL); 3152 if ((seq_flags & NO_CDB_SENT) != 0) { 3153 ahc_print_path(ahc, scb); 3154 printk("No or incomplete CDB sent to device.\n"); 3155 } else if ((ahc_inb(ahc, SCB_CONTROL) & STATUS_RCVD) == 0) { 3156 /* 3157 * The target never bothered to provide status to 3158 * us prior to completing the command. Since we don't 3159 * know the disposition of this command, we must attempt 3160 * to abort it. Assert ATN and prepare to send an abort 3161 * message. 3162 */ 3163 ahc_print_path(ahc, scb); 3164 printk("Completed command without status.\n"); 3165 } else { 3166 ahc_print_path(ahc, scb); 3167 printk("Unknown protocol violation.\n"); 3168 ahc_dump_card_state(ahc); 3169 } 3170 } 3171 if ((lastphase & ~P_DATAIN_DT) == 0 3172 || lastphase == P_COMMAND) { 3173 proto_violation_reset: 3174 /* 3175 * Target either went directly to data/command 3176 * phase or didn't respond to our ATN. 3177 * The only safe thing to do is to blow 3178 * it away with a bus reset. 3179 */ 3180 found = ahc_reset_channel(ahc, 'A', TRUE); 3181 printk("%s: Issued Channel %c Bus Reset. " 3182 "%d SCBs aborted\n", ahc_name(ahc), 'A', found); 3183 } else { 3184 /* 3185 * Leave the selection hardware off in case 3186 * this abort attempt will affect yet to 3187 * be sent commands. 3188 */ 3189 ahc_outb(ahc, SCSISEQ, 3190 ahc_inb(ahc, SCSISEQ) & ~ENSELO); 3191 ahc_assert_atn(ahc); 3192 ahc_outb(ahc, MSG_OUT, HOST_MSG); 3193 if (scb == NULL) { 3194 ahc_print_devinfo(ahc, &devinfo); 3195 ahc->msgout_buf[0] = MSG_ABORT_TASK; 3196 ahc->msgout_len = 1; 3197 ahc->msgout_index = 0; 3198 ahc->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 3199 } else { 3200 ahc_print_path(ahc, scb); 3201 scb->flags |= SCB_ABORT; 3202 } 3203 printk("Protocol violation %s. Attempting to abort.\n", 3204 ahc_lookup_phase_entry(curphase)->phasemsg); 3205 } 3206 } 3207 3208 /* 3209 * Manual message loop handler. 3210 */ 3211 static void 3212 ahc_handle_message_phase(struct ahc_softc *ahc) 3213 { 3214 struct ahc_devinfo devinfo; 3215 u_int bus_phase; 3216 int end_session; 3217 3218 ahc_fetch_devinfo(ahc, &devinfo); 3219 end_session = FALSE; 3220 bus_phase = ahc_inb(ahc, SCSISIGI) & PHASE_MASK; 3221 3222 reswitch: 3223 switch (ahc->msg_type) { 3224 case MSG_TYPE_INITIATOR_MSGOUT: 3225 { 3226 int lastbyte; 3227 int phasemis; 3228 int msgdone; 3229 3230 if (ahc->msgout_len == 0) 3231 panic("HOST_MSG_LOOP interrupt with no active message"); 3232 3233 #ifdef AHC_DEBUG 3234 if ((ahc_debug & AHC_SHOW_MESSAGES) != 0) { 3235 ahc_print_devinfo(ahc, &devinfo); 3236 printk("INITIATOR_MSG_OUT"); 3237 } 3238 #endif 3239 phasemis = bus_phase != P_MESGOUT; 3240 if (phasemis) { 3241 #ifdef AHC_DEBUG 3242 if ((ahc_debug & AHC_SHOW_MESSAGES) != 0) { 3243 printk(" PHASEMIS %s\n", 3244 ahc_lookup_phase_entry(bus_phase) 3245 ->phasemsg); 3246 } 3247 #endif 3248 if (bus_phase == P_MESGIN) { 3249 /* 3250 * Change gears and see if 3251 * this messages is of interest to 3252 * us or should be passed back to 3253 * the sequencer. 3254 */ 3255 ahc_outb(ahc, CLRSINT1, CLRATNO); 3256 ahc->send_msg_perror = FALSE; 3257 ahc->msg_type = MSG_TYPE_INITIATOR_MSGIN; 3258 ahc->msgin_index = 0; 3259 goto reswitch; 3260 } 3261 end_session = TRUE; 3262 break; 3263 } 3264 3265 if (ahc->send_msg_perror) { 3266 ahc_outb(ahc, CLRSINT1, CLRATNO); 3267 ahc_outb(ahc, CLRSINT1, CLRREQINIT); 3268 #ifdef AHC_DEBUG 3269 if ((ahc_debug & AHC_SHOW_MESSAGES) != 0) 3270 printk(" byte 0x%x\n", ahc->send_msg_perror); 3271 #endif 3272 ahc_outb(ahc, SCSIDATL, MSG_PARITY_ERROR); 3273 break; 3274 } 3275 3276 msgdone = ahc->msgout_index == ahc->msgout_len; 3277 if (msgdone) { 3278 /* 3279 * The target has requested a retry. 3280 * Re-assert ATN, reset our message index to 3281 * 0, and try again. 3282 */ 3283 ahc->msgout_index = 0; 3284 ahc_assert_atn(ahc); 3285 } 3286 3287 lastbyte = ahc->msgout_index == (ahc->msgout_len - 1); 3288 if (lastbyte) { 3289 /* Last byte is signified by dropping ATN */ 3290 ahc_outb(ahc, CLRSINT1, CLRATNO); 3291 } 3292 3293 /* 3294 * Clear our interrupt status and present 3295 * the next byte on the bus. 3296 */ 3297 ahc_outb(ahc, CLRSINT1, CLRREQINIT); 3298 #ifdef AHC_DEBUG 3299 if ((ahc_debug & AHC_SHOW_MESSAGES) != 0) 3300 printk(" byte 0x%x\n", 3301 ahc->msgout_buf[ahc->msgout_index]); 3302 #endif 3303 ahc_outb(ahc, SCSIDATL, ahc->msgout_buf[ahc->msgout_index++]); 3304 break; 3305 } 3306 case MSG_TYPE_INITIATOR_MSGIN: 3307 { 3308 int phasemis; 3309 int message_done; 3310 3311 #ifdef AHC_DEBUG 3312 if ((ahc_debug & AHC_SHOW_MESSAGES) != 0) { 3313 ahc_print_devinfo(ahc, &devinfo); 3314 printk("INITIATOR_MSG_IN"); 3315 } 3316 #endif 3317 phasemis = bus_phase != P_MESGIN; 3318 if (phasemis) { 3319 #ifdef AHC_DEBUG 3320 if ((ahc_debug & AHC_SHOW_MESSAGES) != 0) { 3321 printk(" PHASEMIS %s\n", 3322 ahc_lookup_phase_entry(bus_phase) 3323 ->phasemsg); 3324 } 3325 #endif 3326 ahc->msgin_index = 0; 3327 if (bus_phase == P_MESGOUT 3328 && (ahc->send_msg_perror == TRUE 3329 || (ahc->msgout_len != 0 3330 && ahc->msgout_index == 0))) { 3331 ahc->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 3332 goto reswitch; 3333 } 3334 end_session = TRUE; 3335 break; 3336 } 3337 3338 /* Pull the byte in without acking it */ 3339 ahc->msgin_buf[ahc->msgin_index] = ahc_inb(ahc, SCSIBUSL); 3340 #ifdef AHC_DEBUG 3341 if ((ahc_debug & AHC_SHOW_MESSAGES) != 0) 3342 printk(" byte 0x%x\n", 3343 ahc->msgin_buf[ahc->msgin_index]); 3344 #endif 3345 3346 message_done = ahc_parse_msg(ahc, &devinfo); 3347 3348 if (message_done) { 3349 /* 3350 * Clear our incoming message buffer in case there 3351 * is another message following this one. 3352 */ 3353 ahc->msgin_index = 0; 3354 3355 /* 3356 * If this message illicited a response, 3357 * assert ATN so the target takes us to the 3358 * message out phase. 3359 */ 3360 if (ahc->msgout_len != 0) { 3361 #ifdef AHC_DEBUG 3362 if ((ahc_debug & AHC_SHOW_MESSAGES) != 0) { 3363 ahc_print_devinfo(ahc, &devinfo); 3364 printk("Asserting ATN for response\n"); 3365 } 3366 #endif 3367 ahc_assert_atn(ahc); 3368 } 3369 } else 3370 ahc->msgin_index++; 3371 3372 if (message_done == MSGLOOP_TERMINATED) { 3373 end_session = TRUE; 3374 } else { 3375 /* Ack the byte */ 3376 ahc_outb(ahc, CLRSINT1, CLRREQINIT); 3377 ahc_inb(ahc, SCSIDATL); 3378 } 3379 break; 3380 } 3381 case MSG_TYPE_TARGET_MSGIN: 3382 { 3383 int msgdone; 3384 int msgout_request; 3385 3386 if (ahc->msgout_len == 0) 3387 panic("Target MSGIN with no active message"); 3388 3389 /* 3390 * If we interrupted a mesgout session, the initiator 3391 * will not know this until our first REQ. So, we 3392 * only honor mesgout requests after we've sent our 3393 * first byte. 3394 */ 3395 if ((ahc_inb(ahc, SCSISIGI) & ATNI) != 0 3396 && ahc->msgout_index > 0) 3397 msgout_request = TRUE; 3398 else 3399 msgout_request = FALSE; 3400 3401 if (msgout_request) { 3402 3403 /* 3404 * Change gears and see if 3405 * this messages is of interest to 3406 * us or should be passed back to 3407 * the sequencer. 3408 */ 3409 ahc->msg_type = MSG_TYPE_TARGET_MSGOUT; 3410 ahc_outb(ahc, SCSISIGO, P_MESGOUT | BSYO); 3411 ahc->msgin_index = 0; 3412 /* Dummy read to REQ for first byte */ 3413 ahc_inb(ahc, SCSIDATL); 3414 ahc_outb(ahc, SXFRCTL0, 3415 ahc_inb(ahc, SXFRCTL0) | SPIOEN); 3416 break; 3417 } 3418 3419 msgdone = ahc->msgout_index == ahc->msgout_len; 3420 if (msgdone) { 3421 ahc_outb(ahc, SXFRCTL0, 3422 ahc_inb(ahc, SXFRCTL0) & ~SPIOEN); 3423 end_session = TRUE; 3424 break; 3425 } 3426 3427 /* 3428 * Present the next byte on the bus. 3429 */ 3430 ahc_outb(ahc, SXFRCTL0, ahc_inb(ahc, SXFRCTL0) | SPIOEN); 3431 ahc_outb(ahc, SCSIDATL, ahc->msgout_buf[ahc->msgout_index++]); 3432 break; 3433 } 3434 case MSG_TYPE_TARGET_MSGOUT: 3435 { 3436 int lastbyte; 3437 int msgdone; 3438 3439 /* 3440 * The initiator signals that this is 3441 * the last byte by dropping ATN. 3442 */ 3443 lastbyte = (ahc_inb(ahc, SCSISIGI) & ATNI) == 0; 3444 3445 /* 3446 * Read the latched byte, but turn off SPIOEN first 3447 * so that we don't inadvertently cause a REQ for the 3448 * next byte. 3449 */ 3450 ahc_outb(ahc, SXFRCTL0, ahc_inb(ahc, SXFRCTL0) & ~SPIOEN); 3451 ahc->msgin_buf[ahc->msgin_index] = ahc_inb(ahc, SCSIDATL); 3452 msgdone = ahc_parse_msg(ahc, &devinfo); 3453 if (msgdone == MSGLOOP_TERMINATED) { 3454 /* 3455 * The message is *really* done in that it caused 3456 * us to go to bus free. The sequencer has already 3457 * been reset at this point, so pull the ejection 3458 * handle. 3459 */ 3460 return; 3461 } 3462 3463 ahc->msgin_index++; 3464 3465 /* 3466 * XXX Read spec about initiator dropping ATN too soon 3467 * and use msgdone to detect it. 3468 */ 3469 if (msgdone == MSGLOOP_MSGCOMPLETE) { 3470 ahc->msgin_index = 0; 3471 3472 /* 3473 * If this message illicited a response, transition 3474 * to the Message in phase and send it. 3475 */ 3476 if (ahc->msgout_len != 0) { 3477 ahc_outb(ahc, SCSISIGO, P_MESGIN | BSYO); 3478 ahc_outb(ahc, SXFRCTL0, 3479 ahc_inb(ahc, SXFRCTL0) | SPIOEN); 3480 ahc->msg_type = MSG_TYPE_TARGET_MSGIN; 3481 ahc->msgin_index = 0; 3482 break; 3483 } 3484 } 3485 3486 if (lastbyte) 3487 end_session = TRUE; 3488 else { 3489 /* Ask for the next byte. */ 3490 ahc_outb(ahc, SXFRCTL0, 3491 ahc_inb(ahc, SXFRCTL0) | SPIOEN); 3492 } 3493 3494 break; 3495 } 3496 default: 3497 panic("Unknown REQINIT message type"); 3498 } 3499 3500 if (end_session) { 3501 ahc_clear_msg_state(ahc); 3502 ahc_outb(ahc, RETURN_1, EXIT_MSG_LOOP); 3503 } else 3504 ahc_outb(ahc, RETURN_1, CONT_MSG_LOOP); 3505 } 3506 3507 /* 3508 * See if we sent a particular extended message to the target. 3509 * If "full" is true, return true only if the target saw the full 3510 * message. If "full" is false, return true if the target saw at 3511 * least the first byte of the message. 3512 */ 3513 static int 3514 ahc_sent_msg(struct ahc_softc *ahc, ahc_msgtype type, u_int msgval, int full) 3515 { 3516 int found; 3517 u_int index; 3518 3519 found = FALSE; 3520 index = 0; 3521 3522 while (index < ahc->msgout_len) { 3523 if (ahc->msgout_buf[index] == MSG_EXTENDED) { 3524 u_int end_index; 3525 3526 end_index = index + 1 + ahc->msgout_buf[index + 1]; 3527 if (ahc->msgout_buf[index+2] == msgval 3528 && type == AHCMSG_EXT) { 3529 3530 if (full) { 3531 if (ahc->msgout_index > end_index) 3532 found = TRUE; 3533 } else if (ahc->msgout_index > index) 3534 found = TRUE; 3535 } 3536 index = end_index; 3537 } else if (ahc->msgout_buf[index] >= MSG_SIMPLE_TASK 3538 && ahc->msgout_buf[index] <= MSG_IGN_WIDE_RESIDUE) { 3539 3540 /* Skip tag type and tag id or residue param*/ 3541 index += 2; 3542 } else { 3543 /* Single byte message */ 3544 if (type == AHCMSG_1B 3545 && ahc->msgout_buf[index] == msgval 3546 && ahc->msgout_index > index) 3547 found = TRUE; 3548 index++; 3549 } 3550 3551 if (found) 3552 break; 3553 } 3554 return (found); 3555 } 3556 3557 /* 3558 * Wait for a complete incoming message, parse it, and respond accordingly. 3559 */ 3560 static int 3561 ahc_parse_msg(struct ahc_softc *ahc, struct ahc_devinfo *devinfo) 3562 { 3563 struct ahc_initiator_tinfo *tinfo; 3564 struct ahc_tmode_tstate *tstate; 3565 int reject; 3566 int done; 3567 int response; 3568 u_int targ_scsirate; 3569 3570 done = MSGLOOP_IN_PROG; 3571 response = FALSE; 3572 reject = FALSE; 3573 tinfo = ahc_fetch_transinfo(ahc, devinfo->channel, devinfo->our_scsiid, 3574 devinfo->target, &tstate); 3575 targ_scsirate = tinfo->scsirate; 3576 3577 /* 3578 * Parse as much of the message as is available, 3579 * rejecting it if we don't support it. When 3580 * the entire message is available and has been 3581 * handled, return MSGLOOP_MSGCOMPLETE, indicating 3582 * that we have parsed an entire message. 3583 * 3584 * In the case of extended messages, we accept the length 3585 * byte outright and perform more checking once we know the 3586 * extended message type. 3587 */ 3588 switch (ahc->msgin_buf[0]) { 3589 case MSG_DISCONNECT: 3590 case MSG_SAVEDATAPOINTER: 3591 case MSG_CMDCOMPLETE: 3592 case MSG_RESTOREPOINTERS: 3593 case MSG_IGN_WIDE_RESIDUE: 3594 /* 3595 * End our message loop as these are messages 3596 * the sequencer handles on its own. 3597 */ 3598 done = MSGLOOP_TERMINATED; 3599 break; 3600 case MSG_MESSAGE_REJECT: 3601 response = ahc_handle_msg_reject(ahc, devinfo); 3602 fallthrough; 3603 case MSG_NOOP: 3604 done = MSGLOOP_MSGCOMPLETE; 3605 break; 3606 case MSG_EXTENDED: 3607 { 3608 /* Wait for enough of the message to begin validation */ 3609 if (ahc->msgin_index < 2) 3610 break; 3611 switch (ahc->msgin_buf[2]) { 3612 case MSG_EXT_SDTR: 3613 { 3614 const struct ahc_syncrate *syncrate; 3615 u_int period; 3616 u_int ppr_options; 3617 u_int offset; 3618 u_int saved_offset; 3619 3620 if (ahc->msgin_buf[1] != MSG_EXT_SDTR_LEN) { 3621 reject = TRUE; 3622 break; 3623 } 3624 3625 /* 3626 * Wait until we have both args before validating 3627 * and acting on this message. 3628 * 3629 * Add one to MSG_EXT_SDTR_LEN to account for 3630 * the extended message preamble. 3631 */ 3632 if (ahc->msgin_index < (MSG_EXT_SDTR_LEN + 1)) 3633 break; 3634 3635 period = ahc->msgin_buf[3]; 3636 ppr_options = 0; 3637 saved_offset = offset = ahc->msgin_buf[4]; 3638 syncrate = ahc_devlimited_syncrate(ahc, tinfo, &period, 3639 &ppr_options, 3640 devinfo->role); 3641 ahc_validate_offset(ahc, tinfo, syncrate, &offset, 3642 targ_scsirate & WIDEXFER, 3643 devinfo->role); 3644 if (bootverbose) { 3645 printk("(%s:%c:%d:%d): Received " 3646 "SDTR period %x, offset %x\n\t" 3647 "Filtered to period %x, offset %x\n", 3648 ahc_name(ahc), devinfo->channel, 3649 devinfo->target, devinfo->lun, 3650 ahc->msgin_buf[3], saved_offset, 3651 period, offset); 3652 } 3653 ahc_set_syncrate(ahc, devinfo, 3654 syncrate, period, 3655 offset, ppr_options, 3656 AHC_TRANS_ACTIVE|AHC_TRANS_GOAL, 3657 /*paused*/TRUE); 3658 3659 /* 3660 * See if we initiated Sync Negotiation 3661 * and didn't have to fall down to async 3662 * transfers. 3663 */ 3664 if (ahc_sent_msg(ahc, AHCMSG_EXT, MSG_EXT_SDTR, TRUE)) { 3665 /* We started it */ 3666 if (saved_offset != offset) { 3667 /* Went too low - force async */ 3668 reject = TRUE; 3669 } 3670 } else { 3671 /* 3672 * Send our own SDTR in reply 3673 */ 3674 if (bootverbose 3675 && devinfo->role == ROLE_INITIATOR) { 3676 printk("(%s:%c:%d:%d): Target " 3677 "Initiated SDTR\n", 3678 ahc_name(ahc), devinfo->channel, 3679 devinfo->target, devinfo->lun); 3680 } 3681 ahc->msgout_index = 0; 3682 ahc->msgout_len = 0; 3683 ahc_construct_sdtr(ahc, devinfo, 3684 period, offset); 3685 ahc->msgout_index = 0; 3686 response = TRUE; 3687 } 3688 done = MSGLOOP_MSGCOMPLETE; 3689 break; 3690 } 3691 case MSG_EXT_WDTR: 3692 { 3693 u_int bus_width; 3694 u_int saved_width; 3695 u_int sending_reply; 3696 3697 sending_reply = FALSE; 3698 if (ahc->msgin_buf[1] != MSG_EXT_WDTR_LEN) { 3699 reject = TRUE; 3700 break; 3701 } 3702 3703 /* 3704 * Wait until we have our arg before validating 3705 * and acting on this message. 3706 * 3707 * Add one to MSG_EXT_WDTR_LEN to account for 3708 * the extended message preamble. 3709 */ 3710 if (ahc->msgin_index < (MSG_EXT_WDTR_LEN + 1)) 3711 break; 3712 3713 bus_width = ahc->msgin_buf[3]; 3714 saved_width = bus_width; 3715 ahc_validate_width(ahc, tinfo, &bus_width, 3716 devinfo->role); 3717 if (bootverbose) { 3718 printk("(%s:%c:%d:%d): Received WDTR " 3719 "%x filtered to %x\n", 3720 ahc_name(ahc), devinfo->channel, 3721 devinfo->target, devinfo->lun, 3722 saved_width, bus_width); 3723 } 3724 3725 if (ahc_sent_msg(ahc, AHCMSG_EXT, MSG_EXT_WDTR, TRUE)) { 3726 /* 3727 * Don't send a WDTR back to the 3728 * target, since we asked first. 3729 * If the width went higher than our 3730 * request, reject it. 3731 */ 3732 if (saved_width > bus_width) { 3733 reject = TRUE; 3734 printk("(%s:%c:%d:%d): requested %dBit " 3735 "transfers. Rejecting...\n", 3736 ahc_name(ahc), devinfo->channel, 3737 devinfo->target, devinfo->lun, 3738 8 * (0x01 << bus_width)); 3739 bus_width = 0; 3740 } 3741 } else { 3742 /* 3743 * Send our own WDTR in reply 3744 */ 3745 if (bootverbose 3746 && devinfo->role == ROLE_INITIATOR) { 3747 printk("(%s:%c:%d:%d): Target " 3748 "Initiated WDTR\n", 3749 ahc_name(ahc), devinfo->channel, 3750 devinfo->target, devinfo->lun); 3751 } 3752 ahc->msgout_index = 0; 3753 ahc->msgout_len = 0; 3754 ahc_construct_wdtr(ahc, devinfo, bus_width); 3755 ahc->msgout_index = 0; 3756 response = TRUE; 3757 sending_reply = TRUE; 3758 } 3759 /* 3760 * After a wide message, we are async, but 3761 * some devices don't seem to honor this portion 3762 * of the spec. Force a renegotiation of the 3763 * sync component of our transfer agreement even 3764 * if our goal is async. By updating our width 3765 * after forcing the negotiation, we avoid 3766 * renegotiating for width. 3767 */ 3768 ahc_update_neg_request(ahc, devinfo, tstate, 3769 tinfo, AHC_NEG_ALWAYS); 3770 ahc_set_width(ahc, devinfo, bus_width, 3771 AHC_TRANS_ACTIVE|AHC_TRANS_GOAL, 3772 /*paused*/TRUE); 3773 if (sending_reply == FALSE && reject == FALSE) { 3774 3775 /* 3776 * We will always have an SDTR to send. 3777 */ 3778 ahc->msgout_index = 0; 3779 ahc->msgout_len = 0; 3780 ahc_build_transfer_msg(ahc, devinfo); 3781 ahc->msgout_index = 0; 3782 response = TRUE; 3783 } 3784 done = MSGLOOP_MSGCOMPLETE; 3785 break; 3786 } 3787 case MSG_EXT_PPR: 3788 { 3789 const struct ahc_syncrate *syncrate; 3790 u_int period; 3791 u_int offset; 3792 u_int bus_width; 3793 u_int ppr_options; 3794 u_int saved_width; 3795 u_int saved_offset; 3796 u_int saved_ppr_options; 3797 3798 if (ahc->msgin_buf[1] != MSG_EXT_PPR_LEN) { 3799 reject = TRUE; 3800 break; 3801 } 3802 3803 /* 3804 * Wait until we have all args before validating 3805 * and acting on this message. 3806 * 3807 * Add one to MSG_EXT_PPR_LEN to account for 3808 * the extended message preamble. 3809 */ 3810 if (ahc->msgin_index < (MSG_EXT_PPR_LEN + 1)) 3811 break; 3812 3813 period = ahc->msgin_buf[3]; 3814 offset = ahc->msgin_buf[5]; 3815 bus_width = ahc->msgin_buf[6]; 3816 saved_width = bus_width; 3817 ppr_options = ahc->msgin_buf[7]; 3818 /* 3819 * According to the spec, a DT only 3820 * period factor with no DT option 3821 * set implies async. 3822 */ 3823 if ((ppr_options & MSG_EXT_PPR_DT_REQ) == 0 3824 && period == 9) 3825 offset = 0; 3826 saved_ppr_options = ppr_options; 3827 saved_offset = offset; 3828 3829 /* 3830 * Mask out any options we don't support 3831 * on any controller. Transfer options are 3832 * only available if we are negotiating wide. 3833 */ 3834 ppr_options &= MSG_EXT_PPR_DT_REQ; 3835 if (bus_width == 0) 3836 ppr_options = 0; 3837 3838 ahc_validate_width(ahc, tinfo, &bus_width, 3839 devinfo->role); 3840 syncrate = ahc_devlimited_syncrate(ahc, tinfo, &period, 3841 &ppr_options, 3842 devinfo->role); 3843 ahc_validate_offset(ahc, tinfo, syncrate, 3844 &offset, bus_width, 3845 devinfo->role); 3846 3847 if (ahc_sent_msg(ahc, AHCMSG_EXT, MSG_EXT_PPR, TRUE)) { 3848 /* 3849 * If we are unable to do any of the 3850 * requested options (we went too low), 3851 * then we'll have to reject the message. 3852 */ 3853 if (saved_width > bus_width 3854 || saved_offset != offset 3855 || saved_ppr_options != ppr_options) { 3856 reject = TRUE; 3857 period = 0; 3858 offset = 0; 3859 bus_width = 0; 3860 ppr_options = 0; 3861 syncrate = NULL; 3862 } 3863 } else { 3864 if (devinfo->role != ROLE_TARGET) 3865 printk("(%s:%c:%d:%d): Target " 3866 "Initiated PPR\n", 3867 ahc_name(ahc), devinfo->channel, 3868 devinfo->target, devinfo->lun); 3869 else 3870 printk("(%s:%c:%d:%d): Initiator " 3871 "Initiated PPR\n", 3872 ahc_name(ahc), devinfo->channel, 3873 devinfo->target, devinfo->lun); 3874 ahc->msgout_index = 0; 3875 ahc->msgout_len = 0; 3876 ahc_construct_ppr(ahc, devinfo, period, offset, 3877 bus_width, ppr_options); 3878 ahc->msgout_index = 0; 3879 response = TRUE; 3880 } 3881 if (bootverbose) { 3882 printk("(%s:%c:%d:%d): Received PPR width %x, " 3883 "period %x, offset %x,options %x\n" 3884 "\tFiltered to width %x, period %x, " 3885 "offset %x, options %x\n", 3886 ahc_name(ahc), devinfo->channel, 3887 devinfo->target, devinfo->lun, 3888 saved_width, ahc->msgin_buf[3], 3889 saved_offset, saved_ppr_options, 3890 bus_width, period, offset, ppr_options); 3891 } 3892 ahc_set_width(ahc, devinfo, bus_width, 3893 AHC_TRANS_ACTIVE|AHC_TRANS_GOAL, 3894 /*paused*/TRUE); 3895 ahc_set_syncrate(ahc, devinfo, 3896 syncrate, period, 3897 offset, ppr_options, 3898 AHC_TRANS_ACTIVE|AHC_TRANS_GOAL, 3899 /*paused*/TRUE); 3900 done = MSGLOOP_MSGCOMPLETE; 3901 break; 3902 } 3903 default: 3904 /* Unknown extended message. Reject it. */ 3905 reject = TRUE; 3906 break; 3907 } 3908 break; 3909 } 3910 #ifdef AHC_TARGET_MODE 3911 case MSG_BUS_DEV_RESET: 3912 ahc_handle_devreset(ahc, devinfo, 3913 CAM_BDR_SENT, 3914 "Bus Device Reset Received", 3915 /*verbose_level*/0); 3916 ahc_restart(ahc); 3917 done = MSGLOOP_TERMINATED; 3918 break; 3919 case MSG_ABORT_TAG: 3920 case MSG_ABORT: 3921 case MSG_CLEAR_QUEUE: 3922 { 3923 int tag; 3924 3925 /* Target mode messages */ 3926 if (devinfo->role != ROLE_TARGET) { 3927 reject = TRUE; 3928 break; 3929 } 3930 tag = SCB_LIST_NULL; 3931 if (ahc->msgin_buf[0] == MSG_ABORT_TAG) 3932 tag = ahc_inb(ahc, INITIATOR_TAG); 3933 ahc_abort_scbs(ahc, devinfo->target, devinfo->channel, 3934 devinfo->lun, tag, ROLE_TARGET, 3935 CAM_REQ_ABORTED); 3936 3937 tstate = ahc->enabled_targets[devinfo->our_scsiid]; 3938 if (tstate != NULL) { 3939 struct ahc_tmode_lstate* lstate; 3940 3941 lstate = tstate->enabled_luns[devinfo->lun]; 3942 if (lstate != NULL) { 3943 ahc_queue_lstate_event(ahc, lstate, 3944 devinfo->our_scsiid, 3945 ahc->msgin_buf[0], 3946 /*arg*/tag); 3947 ahc_send_lstate_events(ahc, lstate); 3948 } 3949 } 3950 ahc_restart(ahc); 3951 done = MSGLOOP_TERMINATED; 3952 break; 3953 } 3954 #endif 3955 case MSG_TERM_IO_PROC: 3956 default: 3957 reject = TRUE; 3958 break; 3959 } 3960 3961 if (reject) { 3962 /* 3963 * Setup to reject the message. 3964 */ 3965 ahc->msgout_index = 0; 3966 ahc->msgout_len = 1; 3967 ahc->msgout_buf[0] = MSG_MESSAGE_REJECT; 3968 done = MSGLOOP_MSGCOMPLETE; 3969 response = TRUE; 3970 } 3971 3972 if (done != MSGLOOP_IN_PROG && !response) 3973 /* Clear the outgoing message buffer */ 3974 ahc->msgout_len = 0; 3975 3976 return (done); 3977 } 3978 3979 /* 3980 * Process a message reject message. 3981 */ 3982 static int 3983 ahc_handle_msg_reject(struct ahc_softc *ahc, struct ahc_devinfo *devinfo) 3984 { 3985 /* 3986 * What we care about here is if we had an 3987 * outstanding SDTR or WDTR message for this 3988 * target. If we did, this is a signal that 3989 * the target is refusing negotiation. 3990 */ 3991 struct scb *scb; 3992 struct ahc_initiator_tinfo *tinfo; 3993 struct ahc_tmode_tstate *tstate; 3994 u_int scb_index; 3995 u_int last_msg; 3996 int response = 0; 3997 3998 scb_index = ahc_inb(ahc, SCB_TAG); 3999 scb = ahc_lookup_scb(ahc, scb_index); 4000 tinfo = ahc_fetch_transinfo(ahc, devinfo->channel, 4001 devinfo->our_scsiid, 4002 devinfo->target, &tstate); 4003 /* Might be necessary */ 4004 last_msg = ahc_inb(ahc, LAST_MSG); 4005 4006 if (ahc_sent_msg(ahc, AHCMSG_EXT, MSG_EXT_PPR, /*full*/FALSE)) { 4007 /* 4008 * Target does not support the PPR message. 4009 * Attempt to negotiate SPI-2 style. 4010 */ 4011 if (bootverbose) { 4012 printk("(%s:%c:%d:%d): PPR Rejected. " 4013 "Trying WDTR/SDTR\n", 4014 ahc_name(ahc), devinfo->channel, 4015 devinfo->target, devinfo->lun); 4016 } 4017 tinfo->goal.ppr_options = 0; 4018 tinfo->curr.transport_version = 2; 4019 tinfo->goal.transport_version = 2; 4020 ahc->msgout_index = 0; 4021 ahc->msgout_len = 0; 4022 ahc_build_transfer_msg(ahc, devinfo); 4023 ahc->msgout_index = 0; 4024 response = 1; 4025 } else if (ahc_sent_msg(ahc, AHCMSG_EXT, MSG_EXT_WDTR, /*full*/FALSE)) { 4026 4027 /* note 8bit xfers */ 4028 printk("(%s:%c:%d:%d): refuses WIDE negotiation. Using " 4029 "8bit transfers\n", ahc_name(ahc), 4030 devinfo->channel, devinfo->target, devinfo->lun); 4031 ahc_set_width(ahc, devinfo, MSG_EXT_WDTR_BUS_8_BIT, 4032 AHC_TRANS_ACTIVE|AHC_TRANS_GOAL, 4033 /*paused*/TRUE); 4034 /* 4035 * No need to clear the sync rate. If the target 4036 * did not accept the command, our syncrate is 4037 * unaffected. If the target started the negotiation, 4038 * but rejected our response, we already cleared the 4039 * sync rate before sending our WDTR. 4040 */ 4041 if (tinfo->goal.offset != tinfo->curr.offset) { 4042 4043 /* Start the sync negotiation */ 4044 ahc->msgout_index = 0; 4045 ahc->msgout_len = 0; 4046 ahc_build_transfer_msg(ahc, devinfo); 4047 ahc->msgout_index = 0; 4048 response = 1; 4049 } 4050 } else if (ahc_sent_msg(ahc, AHCMSG_EXT, MSG_EXT_SDTR, /*full*/FALSE)) { 4051 /* note asynch xfers and clear flag */ 4052 ahc_set_syncrate(ahc, devinfo, /*syncrate*/NULL, /*period*/0, 4053 /*offset*/0, /*ppr_options*/0, 4054 AHC_TRANS_ACTIVE|AHC_TRANS_GOAL, 4055 /*paused*/TRUE); 4056 printk("(%s:%c:%d:%d): refuses synchronous negotiation. " 4057 "Using asynchronous transfers\n", 4058 ahc_name(ahc), devinfo->channel, 4059 devinfo->target, devinfo->lun); 4060 } else if ((scb->hscb->control & MSG_SIMPLE_TASK) != 0) { 4061 int tag_type; 4062 int mask; 4063 4064 tag_type = (scb->hscb->control & MSG_SIMPLE_TASK); 4065 4066 if (tag_type == MSG_SIMPLE_TASK) { 4067 printk("(%s:%c:%d:%d): refuses tagged commands. " 4068 "Performing non-tagged I/O\n", ahc_name(ahc), 4069 devinfo->channel, devinfo->target, devinfo->lun); 4070 ahc_set_tags(ahc, scb->io_ctx, devinfo, AHC_QUEUE_NONE); 4071 mask = ~0x23; 4072 } else { 4073 printk("(%s:%c:%d:%d): refuses %s tagged commands. " 4074 "Performing simple queue tagged I/O only\n", 4075 ahc_name(ahc), devinfo->channel, devinfo->target, 4076 devinfo->lun, tag_type == MSG_ORDERED_TASK 4077 ? "ordered" : "head of queue"); 4078 ahc_set_tags(ahc, scb->io_ctx, devinfo, AHC_QUEUE_BASIC); 4079 mask = ~0x03; 4080 } 4081 4082 /* 4083 * Resend the identify for this CCB as the target 4084 * may believe that the selection is invalid otherwise. 4085 */ 4086 ahc_outb(ahc, SCB_CONTROL, 4087 ahc_inb(ahc, SCB_CONTROL) & mask); 4088 scb->hscb->control &= mask; 4089 ahc_set_transaction_tag(scb, /*enabled*/FALSE, 4090 /*type*/MSG_SIMPLE_TASK); 4091 ahc_outb(ahc, MSG_OUT, MSG_IDENTIFYFLAG); 4092 ahc_assert_atn(ahc); 4093 4094 /* 4095 * This transaction is now at the head of 4096 * the untagged queue for this target. 4097 */ 4098 if ((ahc->flags & AHC_SCB_BTT) == 0) { 4099 struct scb_tailq *untagged_q; 4100 4101 untagged_q = 4102 &(ahc->untagged_queues[devinfo->target_offset]); 4103 TAILQ_INSERT_HEAD(untagged_q, scb, links.tqe); 4104 scb->flags |= SCB_UNTAGGEDQ; 4105 } 4106 ahc_busy_tcl(ahc, BUILD_TCL(scb->hscb->scsiid, devinfo->lun), 4107 scb->hscb->tag); 4108 4109 /* 4110 * Requeue all tagged commands for this target 4111 * currently in our possession so they can be 4112 * converted to untagged commands. 4113 */ 4114 ahc_search_qinfifo(ahc, SCB_GET_TARGET(ahc, scb), 4115 SCB_GET_CHANNEL(ahc, scb), 4116 SCB_GET_LUN(scb), /*tag*/SCB_LIST_NULL, 4117 ROLE_INITIATOR, CAM_REQUEUE_REQ, 4118 SEARCH_COMPLETE); 4119 } else { 4120 /* 4121 * Otherwise, we ignore it. 4122 */ 4123 printk("%s:%c:%d: Message reject for %x -- ignored\n", 4124 ahc_name(ahc), devinfo->channel, devinfo->target, 4125 last_msg); 4126 } 4127 return (response); 4128 } 4129 4130 /* 4131 * Process an ingnore wide residue message. 4132 */ 4133 static void 4134 ahc_handle_ign_wide_residue(struct ahc_softc *ahc, struct ahc_devinfo *devinfo) 4135 { 4136 u_int scb_index; 4137 struct scb *scb; 4138 4139 scb_index = ahc_inb(ahc, SCB_TAG); 4140 scb = ahc_lookup_scb(ahc, scb_index); 4141 /* 4142 * XXX Actually check data direction in the sequencer? 4143 * Perhaps add datadir to some spare bits in the hscb? 4144 */ 4145 if ((ahc_inb(ahc, SEQ_FLAGS) & DPHASE) == 0 4146 || ahc_get_transfer_dir(scb) != CAM_DIR_IN) { 4147 /* 4148 * Ignore the message if we haven't 4149 * seen an appropriate data phase yet. 4150 */ 4151 } else { 4152 /* 4153 * If the residual occurred on the last 4154 * transfer and the transfer request was 4155 * expected to end on an odd count, do 4156 * nothing. Otherwise, subtract a byte 4157 * and update the residual count accordingly. 4158 */ 4159 uint32_t sgptr; 4160 4161 sgptr = ahc_inb(ahc, SCB_RESIDUAL_SGPTR); 4162 if ((sgptr & SG_LIST_NULL) != 0 4163 && (ahc_inb(ahc, SCB_LUN) & SCB_XFERLEN_ODD) != 0) { 4164 /* 4165 * If the residual occurred on the last 4166 * transfer and the transfer request was 4167 * expected to end on an odd count, do 4168 * nothing. 4169 */ 4170 } else { 4171 struct ahc_dma_seg *sg; 4172 uint32_t data_cnt; 4173 uint32_t data_addr; 4174 uint32_t sglen; 4175 4176 /* Pull in all of the sgptr */ 4177 sgptr = ahc_inl(ahc, SCB_RESIDUAL_SGPTR); 4178 data_cnt = ahc_inl(ahc, SCB_RESIDUAL_DATACNT); 4179 4180 if ((sgptr & SG_LIST_NULL) != 0) { 4181 /* 4182 * The residual data count is not updated 4183 * for the command run to completion case. 4184 * Explicitly zero the count. 4185 */ 4186 data_cnt &= ~AHC_SG_LEN_MASK; 4187 } 4188 4189 data_addr = ahc_inl(ahc, SHADDR); 4190 4191 data_cnt += 1; 4192 data_addr -= 1; 4193 sgptr &= SG_PTR_MASK; 4194 4195 sg = ahc_sg_bus_to_virt(scb, sgptr); 4196 4197 /* 4198 * The residual sg ptr points to the next S/G 4199 * to load so we must go back one. 4200 */ 4201 sg--; 4202 sglen = ahc_le32toh(sg->len) & AHC_SG_LEN_MASK; 4203 if (sg != scb->sg_list 4204 && sglen < (data_cnt & AHC_SG_LEN_MASK)) { 4205 4206 sg--; 4207 sglen = ahc_le32toh(sg->len); 4208 /* 4209 * Preserve High Address and SG_LIST bits 4210 * while setting the count to 1. 4211 */ 4212 data_cnt = 1 | (sglen & (~AHC_SG_LEN_MASK)); 4213 data_addr = ahc_le32toh(sg->addr) 4214 + (sglen & AHC_SG_LEN_MASK) - 1; 4215 4216 /* 4217 * Increment sg so it points to the 4218 * "next" sg. 4219 */ 4220 sg++; 4221 sgptr = ahc_sg_virt_to_bus(scb, sg); 4222 } 4223 ahc_outl(ahc, SCB_RESIDUAL_SGPTR, sgptr); 4224 ahc_outl(ahc, SCB_RESIDUAL_DATACNT, data_cnt); 4225 /* 4226 * Toggle the "oddness" of the transfer length 4227 * to handle this mid-transfer ignore wide 4228 * residue. This ensures that the oddness is 4229 * correct for subsequent data transfers. 4230 */ 4231 ahc_outb(ahc, SCB_LUN, 4232 ahc_inb(ahc, SCB_LUN) ^ SCB_XFERLEN_ODD); 4233 } 4234 } 4235 } 4236 4237 4238 /* 4239 * Reinitialize the data pointers for the active transfer 4240 * based on its current residual. 4241 */ 4242 static void 4243 ahc_reinitialize_dataptrs(struct ahc_softc *ahc) 4244 { 4245 struct scb *scb; 4246 struct ahc_dma_seg *sg; 4247 u_int scb_index; 4248 uint32_t sgptr; 4249 uint32_t resid; 4250 uint32_t dataptr; 4251 4252 scb_index = ahc_inb(ahc, SCB_TAG); 4253 scb = ahc_lookup_scb(ahc, scb_index); 4254 sgptr = (ahc_inb(ahc, SCB_RESIDUAL_SGPTR + 3) << 24) 4255 | (ahc_inb(ahc, SCB_RESIDUAL_SGPTR + 2) << 16) 4256 | (ahc_inb(ahc, SCB_RESIDUAL_SGPTR + 1) << 8) 4257 | ahc_inb(ahc, SCB_RESIDUAL_SGPTR); 4258 4259 sgptr &= SG_PTR_MASK; 4260 sg = ahc_sg_bus_to_virt(scb, sgptr); 4261 4262 /* The residual sg_ptr always points to the next sg */ 4263 sg--; 4264 4265 resid = (ahc_inb(ahc, SCB_RESIDUAL_DATACNT + 2) << 16) 4266 | (ahc_inb(ahc, SCB_RESIDUAL_DATACNT + 1) << 8) 4267 | ahc_inb(ahc, SCB_RESIDUAL_DATACNT); 4268 4269 dataptr = ahc_le32toh(sg->addr) 4270 + (ahc_le32toh(sg->len) & AHC_SG_LEN_MASK) 4271 - resid; 4272 if ((ahc->flags & AHC_39BIT_ADDRESSING) != 0) { 4273 u_int dscommand1; 4274 4275 dscommand1 = ahc_inb(ahc, DSCOMMAND1); 4276 ahc_outb(ahc, DSCOMMAND1, dscommand1 | HADDLDSEL0); 4277 ahc_outb(ahc, HADDR, 4278 (ahc_le32toh(sg->len) >> 24) & SG_HIGH_ADDR_BITS); 4279 ahc_outb(ahc, DSCOMMAND1, dscommand1); 4280 } 4281 ahc_outb(ahc, HADDR + 3, dataptr >> 24); 4282 ahc_outb(ahc, HADDR + 2, dataptr >> 16); 4283 ahc_outb(ahc, HADDR + 1, dataptr >> 8); 4284 ahc_outb(ahc, HADDR, dataptr); 4285 ahc_outb(ahc, HCNT + 2, resid >> 16); 4286 ahc_outb(ahc, HCNT + 1, resid >> 8); 4287 ahc_outb(ahc, HCNT, resid); 4288 if ((ahc->features & AHC_ULTRA2) == 0) { 4289 ahc_outb(ahc, STCNT + 2, resid >> 16); 4290 ahc_outb(ahc, STCNT + 1, resid >> 8); 4291 ahc_outb(ahc, STCNT, resid); 4292 } 4293 } 4294 4295 /* 4296 * Handle the effects of issuing a bus device reset message. 4297 */ 4298 static void 4299 ahc_handle_devreset(struct ahc_softc *ahc, struct ahc_devinfo *devinfo, 4300 cam_status status, char *message, int verbose_level) 4301 { 4302 #ifdef AHC_TARGET_MODE 4303 struct ahc_tmode_tstate* tstate; 4304 u_int lun; 4305 #endif 4306 int found; 4307 4308 found = ahc_abort_scbs(ahc, devinfo->target, devinfo->channel, 4309 CAM_LUN_WILDCARD, SCB_LIST_NULL, devinfo->role, 4310 status); 4311 4312 #ifdef AHC_TARGET_MODE 4313 /* 4314 * Send an immediate notify ccb to all target mord peripheral 4315 * drivers affected by this action. 4316 */ 4317 tstate = ahc->enabled_targets[devinfo->our_scsiid]; 4318 if (tstate != NULL) { 4319 for (lun = 0; lun < AHC_NUM_LUNS; lun++) { 4320 struct ahc_tmode_lstate* lstate; 4321 4322 lstate = tstate->enabled_luns[lun]; 4323 if (lstate == NULL) 4324 continue; 4325 4326 ahc_queue_lstate_event(ahc, lstate, devinfo->our_scsiid, 4327 MSG_BUS_DEV_RESET, /*arg*/0); 4328 ahc_send_lstate_events(ahc, lstate); 4329 } 4330 } 4331 #endif 4332 4333 /* 4334 * Go back to async/narrow transfers and renegotiate. 4335 */ 4336 ahc_set_width(ahc, devinfo, MSG_EXT_WDTR_BUS_8_BIT, 4337 AHC_TRANS_CUR, /*paused*/TRUE); 4338 ahc_set_syncrate(ahc, devinfo, /*syncrate*/NULL, 4339 /*period*/0, /*offset*/0, /*ppr_options*/0, 4340 AHC_TRANS_CUR, /*paused*/TRUE); 4341 4342 if (status != CAM_SEL_TIMEOUT) 4343 ahc_send_async(ahc, devinfo->channel, devinfo->target, 4344 CAM_LUN_WILDCARD, AC_SENT_BDR); 4345 4346 if (message != NULL 4347 && (verbose_level <= bootverbose)) 4348 printk("%s: %s on %c:%d. %d SCBs aborted\n", ahc_name(ahc), 4349 message, devinfo->channel, devinfo->target, found); 4350 } 4351 4352 #ifdef AHC_TARGET_MODE 4353 static void 4354 ahc_setup_target_msgin(struct ahc_softc *ahc, struct ahc_devinfo *devinfo, 4355 struct scb *scb) 4356 { 4357 4358 /* 4359 * To facilitate adding multiple messages together, 4360 * each routine should increment the index and len 4361 * variables instead of setting them explicitly. 4362 */ 4363 ahc->msgout_index = 0; 4364 ahc->msgout_len = 0; 4365 4366 if (scb != NULL && (scb->flags & SCB_AUTO_NEGOTIATE) != 0) 4367 ahc_build_transfer_msg(ahc, devinfo); 4368 else 4369 panic("ahc_intr: AWAITING target message with no message"); 4370 4371 ahc->msgout_index = 0; 4372 ahc->msg_type = MSG_TYPE_TARGET_MSGIN; 4373 } 4374 #endif 4375 /**************************** Initialization **********************************/ 4376 /* 4377 * Allocate a controller structure for a new device 4378 * and perform initial initializion. 4379 */ 4380 struct ahc_softc * 4381 ahc_alloc(void *platform_arg, char *name) 4382 { 4383 struct ahc_softc *ahc; 4384 int i; 4385 4386 ahc = kzalloc(sizeof(*ahc), GFP_ATOMIC); 4387 if (!ahc) { 4388 printk("aic7xxx: cannot malloc softc!\n"); 4389 kfree(name); 4390 return NULL; 4391 } 4392 4393 ahc->seep_config = kmalloc(sizeof(*ahc->seep_config), GFP_ATOMIC); 4394 if (ahc->seep_config == NULL) { 4395 kfree(ahc); 4396 kfree(name); 4397 return (NULL); 4398 } 4399 LIST_INIT(&ahc->pending_scbs); 4400 /* We don't know our unit number until the OSM sets it */ 4401 ahc->name = name; 4402 ahc->unit = -1; 4403 ahc->description = NULL; 4404 ahc->channel = 'A'; 4405 ahc->channel_b = 'B'; 4406 ahc->chip = AHC_NONE; 4407 ahc->features = AHC_FENONE; 4408 ahc->bugs = AHC_BUGNONE; 4409 ahc->flags = AHC_FNONE; 4410 /* 4411 * Default to all error reporting enabled with the 4412 * sequencer operating at its fastest speed. 4413 * The bus attach code may modify this. 4414 */ 4415 ahc->seqctl = FASTMODE; 4416 4417 for (i = 0; i < AHC_NUM_TARGETS; i++) 4418 TAILQ_INIT(&ahc->untagged_queues[i]); 4419 if (ahc_platform_alloc(ahc, platform_arg) != 0) { 4420 ahc_free(ahc); 4421 ahc = NULL; 4422 } 4423 return (ahc); 4424 } 4425 4426 int 4427 ahc_softc_init(struct ahc_softc *ahc) 4428 { 4429 4430 /* The IRQMS bit is only valid on VL and EISA chips */ 4431 if ((ahc->chip & AHC_PCI) == 0) 4432 ahc->unpause = ahc_inb(ahc, HCNTRL) & IRQMS; 4433 else 4434 ahc->unpause = 0; 4435 ahc->pause = ahc->unpause | PAUSE; 4436 /* XXX The shared scb data stuff should be deprecated */ 4437 if (ahc->scb_data == NULL) { 4438 ahc->scb_data = kzalloc(sizeof(*ahc->scb_data), GFP_ATOMIC); 4439 if (ahc->scb_data == NULL) 4440 return (ENOMEM); 4441 } 4442 4443 return (0); 4444 } 4445 4446 void 4447 ahc_set_unit(struct ahc_softc *ahc, int unit) 4448 { 4449 ahc->unit = unit; 4450 } 4451 4452 void 4453 ahc_set_name(struct ahc_softc *ahc, char *name) 4454 { 4455 kfree(ahc->name); 4456 ahc->name = name; 4457 } 4458 4459 void 4460 ahc_free(struct ahc_softc *ahc) 4461 { 4462 int i; 4463 4464 switch (ahc->init_level) { 4465 default: 4466 case 5: 4467 ahc_shutdown(ahc); 4468 fallthrough; 4469 case 4: 4470 ahc_dmamap_unload(ahc, ahc->shared_data_dmat, 4471 ahc->shared_data_dmamap); 4472 fallthrough; 4473 case 3: 4474 ahc_dmamem_free(ahc, ahc->shared_data_dmat, ahc->qoutfifo, 4475 ahc->shared_data_dmamap); 4476 ahc_dmamap_destroy(ahc, ahc->shared_data_dmat, 4477 ahc->shared_data_dmamap); 4478 fallthrough; 4479 case 2: 4480 ahc_dma_tag_destroy(ahc, ahc->shared_data_dmat); 4481 case 1: 4482 break; 4483 case 0: 4484 break; 4485 } 4486 4487 ahc_platform_free(ahc); 4488 ahc_fini_scbdata(ahc); 4489 for (i = 0; i < AHC_NUM_TARGETS; i++) { 4490 struct ahc_tmode_tstate *tstate; 4491 4492 tstate = ahc->enabled_targets[i]; 4493 if (tstate != NULL) { 4494 #ifdef AHC_TARGET_MODE 4495 int j; 4496 4497 for (j = 0; j < AHC_NUM_LUNS; j++) { 4498 struct ahc_tmode_lstate *lstate; 4499 4500 lstate = tstate->enabled_luns[j]; 4501 if (lstate != NULL) { 4502 xpt_free_path(lstate->path); 4503 kfree(lstate); 4504 } 4505 } 4506 #endif 4507 kfree(tstate); 4508 } 4509 } 4510 #ifdef AHC_TARGET_MODE 4511 if (ahc->black_hole != NULL) { 4512 xpt_free_path(ahc->black_hole->path); 4513 kfree(ahc->black_hole); 4514 } 4515 #endif 4516 kfree(ahc->name); 4517 kfree(ahc->seep_config); 4518 kfree(ahc); 4519 return; 4520 } 4521 4522 static void 4523 ahc_shutdown(void *arg) 4524 { 4525 struct ahc_softc *ahc; 4526 int i; 4527 4528 ahc = (struct ahc_softc *)arg; 4529 4530 /* This will reset most registers to 0, but not all */ 4531 ahc_reset(ahc, /*reinit*/FALSE); 4532 ahc_outb(ahc, SCSISEQ, 0); 4533 ahc_outb(ahc, SXFRCTL0, 0); 4534 ahc_outb(ahc, DSPCISTATUS, 0); 4535 4536 for (i = TARG_SCSIRATE; i < SCSICONF; i++) 4537 ahc_outb(ahc, i, 0); 4538 } 4539 4540 /* 4541 * Reset the controller and record some information about it 4542 * that is only available just after a reset. If "reinit" is 4543 * non-zero, this reset occurred after initial configuration 4544 * and the caller requests that the chip be fully reinitialized 4545 * to a runable state. Chip interrupts are *not* enabled after 4546 * a reinitialization. The caller must enable interrupts via 4547 * ahc_intr_enable(). 4548 */ 4549 int 4550 ahc_reset(struct ahc_softc *ahc, int reinit) 4551 { 4552 u_int sblkctl; 4553 u_int sxfrctl1_a, sxfrctl1_b; 4554 int error; 4555 int wait; 4556 4557 /* 4558 * Preserve the value of the SXFRCTL1 register for all channels. 4559 * It contains settings that affect termination and we don't want 4560 * to disturb the integrity of the bus. 4561 */ 4562 ahc_pause(ahc); 4563 sxfrctl1_b = 0; 4564 if ((ahc->chip & AHC_CHIPID_MASK) == AHC_AIC7770) { 4565 u_int sblkctl; 4566 4567 /* 4568 * Save channel B's settings in case this chip 4569 * is setup for TWIN channel operation. 4570 */ 4571 sblkctl = ahc_inb(ahc, SBLKCTL); 4572 ahc_outb(ahc, SBLKCTL, sblkctl | SELBUSB); 4573 sxfrctl1_b = ahc_inb(ahc, SXFRCTL1); 4574 ahc_outb(ahc, SBLKCTL, sblkctl & ~SELBUSB); 4575 } 4576 sxfrctl1_a = ahc_inb(ahc, SXFRCTL1); 4577 4578 ahc_outb(ahc, HCNTRL, CHIPRST | ahc->pause); 4579 4580 /* 4581 * Ensure that the reset has finished. We delay 1000us 4582 * prior to reading the register to make sure the chip 4583 * has sufficiently completed its reset to handle register 4584 * accesses. 4585 */ 4586 wait = 1000; 4587 do { 4588 ahc_delay(1000); 4589 } while (--wait && !(ahc_inb(ahc, HCNTRL) & CHIPRSTACK)); 4590 4591 if (wait == 0) { 4592 printk("%s: WARNING - Failed chip reset! " 4593 "Trying to initialize anyway.\n", ahc_name(ahc)); 4594 } 4595 ahc_outb(ahc, HCNTRL, ahc->pause); 4596 4597 /* Determine channel configuration */ 4598 sblkctl = ahc_inb(ahc, SBLKCTL) & (SELBUSB|SELWIDE); 4599 /* No Twin Channel PCI cards */ 4600 if ((ahc->chip & AHC_PCI) != 0) 4601 sblkctl &= ~SELBUSB; 4602 switch (sblkctl) { 4603 case 0: 4604 /* Single Narrow Channel */ 4605 break; 4606 case 2: 4607 /* Wide Channel */ 4608 ahc->features |= AHC_WIDE; 4609 break; 4610 case 8: 4611 /* Twin Channel */ 4612 ahc->features |= AHC_TWIN; 4613 break; 4614 default: 4615 printk(" Unsupported adapter type. Ignoring\n"); 4616 return(-1); 4617 } 4618 4619 /* 4620 * Reload sxfrctl1. 4621 * 4622 * We must always initialize STPWEN to 1 before we 4623 * restore the saved values. STPWEN is initialized 4624 * to a tri-state condition which can only be cleared 4625 * by turning it on. 4626 */ 4627 if ((ahc->features & AHC_TWIN) != 0) { 4628 u_int sblkctl; 4629 4630 sblkctl = ahc_inb(ahc, SBLKCTL); 4631 ahc_outb(ahc, SBLKCTL, sblkctl | SELBUSB); 4632 ahc_outb(ahc, SXFRCTL1, sxfrctl1_b); 4633 ahc_outb(ahc, SBLKCTL, sblkctl & ~SELBUSB); 4634 } 4635 ahc_outb(ahc, SXFRCTL1, sxfrctl1_a); 4636 4637 error = 0; 4638 if (reinit != 0) 4639 /* 4640 * If a recovery action has forced a chip reset, 4641 * re-initialize the chip to our liking. 4642 */ 4643 error = ahc->bus_chip_init(ahc); 4644 #ifdef AHC_DUMP_SEQ 4645 else 4646 ahc_dumpseq(ahc); 4647 #endif 4648 4649 return (error); 4650 } 4651 4652 /* 4653 * Determine the number of SCBs available on the controller 4654 */ 4655 int 4656 ahc_probe_scbs(struct ahc_softc *ahc) { 4657 int i; 4658 4659 for (i = 0; i < AHC_SCB_MAX; i++) { 4660 4661 ahc_outb(ahc, SCBPTR, i); 4662 ahc_outb(ahc, SCB_BASE, i); 4663 if (ahc_inb(ahc, SCB_BASE) != i) 4664 break; 4665 ahc_outb(ahc, SCBPTR, 0); 4666 if (ahc_inb(ahc, SCB_BASE) != 0) 4667 break; 4668 } 4669 return (i); 4670 } 4671 4672 static void 4673 ahc_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error) 4674 { 4675 dma_addr_t *baddr; 4676 4677 baddr = (dma_addr_t *)arg; 4678 *baddr = segs->ds_addr; 4679 } 4680 4681 static void 4682 ahc_build_free_scb_list(struct ahc_softc *ahc) 4683 { 4684 int scbsize; 4685 int i; 4686 4687 scbsize = 32; 4688 if ((ahc->flags & AHC_LSCBS_ENABLED) != 0) 4689 scbsize = 64; 4690 4691 for (i = 0; i < ahc->scb_data->maxhscbs; i++) { 4692 int j; 4693 4694 ahc_outb(ahc, SCBPTR, i); 4695 4696 /* 4697 * Touch all SCB bytes to avoid parity errors 4698 * should one of our debugging routines read 4699 * an otherwise uninitiatlized byte. 4700 */ 4701 for (j = 0; j < scbsize; j++) 4702 ahc_outb(ahc, SCB_BASE+j, 0xFF); 4703 4704 /* Clear the control byte. */ 4705 ahc_outb(ahc, SCB_CONTROL, 0); 4706 4707 /* Set the next pointer */ 4708 if ((ahc->flags & AHC_PAGESCBS) != 0) 4709 ahc_outb(ahc, SCB_NEXT, i+1); 4710 else 4711 ahc_outb(ahc, SCB_NEXT, SCB_LIST_NULL); 4712 4713 /* Make the tag number, SCSIID, and lun invalid */ 4714 ahc_outb(ahc, SCB_TAG, SCB_LIST_NULL); 4715 ahc_outb(ahc, SCB_SCSIID, 0xFF); 4716 ahc_outb(ahc, SCB_LUN, 0xFF); 4717 } 4718 4719 if ((ahc->flags & AHC_PAGESCBS) != 0) { 4720 /* SCB 0 heads the free list. */ 4721 ahc_outb(ahc, FREE_SCBH, 0); 4722 } else { 4723 /* No free list. */ 4724 ahc_outb(ahc, FREE_SCBH, SCB_LIST_NULL); 4725 } 4726 4727 /* Make sure that the last SCB terminates the free list */ 4728 ahc_outb(ahc, SCBPTR, i-1); 4729 ahc_outb(ahc, SCB_NEXT, SCB_LIST_NULL); 4730 } 4731 4732 static int 4733 ahc_init_scbdata(struct ahc_softc *ahc) 4734 { 4735 struct scb_data *scb_data; 4736 4737 scb_data = ahc->scb_data; 4738 SLIST_INIT(&scb_data->free_scbs); 4739 SLIST_INIT(&scb_data->sg_maps); 4740 4741 /* Allocate SCB resources */ 4742 scb_data->scbarray = kcalloc(AHC_SCB_MAX_ALLOC, sizeof(struct scb), 4743 GFP_ATOMIC); 4744 if (scb_data->scbarray == NULL) 4745 return (ENOMEM); 4746 4747 /* Determine the number of hardware SCBs and initialize them */ 4748 4749 scb_data->maxhscbs = ahc_probe_scbs(ahc); 4750 if (ahc->scb_data->maxhscbs == 0) { 4751 printk("%s: No SCB space found\n", ahc_name(ahc)); 4752 return (ENXIO); 4753 } 4754 4755 /* 4756 * Create our DMA tags. These tags define the kinds of device 4757 * accessible memory allocations and memory mappings we will 4758 * need to perform during normal operation. 4759 * 4760 * Unless we need to further restrict the allocation, we rely 4761 * on the restrictions of the parent dmat, hence the common 4762 * use of MAXADDR and MAXSIZE. 4763 */ 4764 4765 /* DMA tag for our hardware scb structures */ 4766 if (ahc_dma_tag_create(ahc, ahc->parent_dmat, /*alignment*/1, 4767 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1, 4768 /*lowaddr*/BUS_SPACE_MAXADDR_32BIT, 4769 /*highaddr*/BUS_SPACE_MAXADDR, 4770 /*filter*/NULL, /*filterarg*/NULL, 4771 AHC_SCB_MAX_ALLOC * sizeof(struct hardware_scb), 4772 /*nsegments*/1, 4773 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT, 4774 /*flags*/0, &scb_data->hscb_dmat) != 0) { 4775 goto error_exit; 4776 } 4777 4778 scb_data->init_level++; 4779 4780 /* Allocation for our hscbs */ 4781 if (ahc_dmamem_alloc(ahc, scb_data->hscb_dmat, 4782 (void **)&scb_data->hscbs, 4783 BUS_DMA_NOWAIT, &scb_data->hscb_dmamap) != 0) { 4784 goto error_exit; 4785 } 4786 4787 scb_data->init_level++; 4788 4789 /* And permanently map them */ 4790 ahc_dmamap_load(ahc, scb_data->hscb_dmat, scb_data->hscb_dmamap, 4791 scb_data->hscbs, 4792 AHC_SCB_MAX_ALLOC * sizeof(struct hardware_scb), 4793 ahc_dmamap_cb, &scb_data->hscb_busaddr, /*flags*/0); 4794 4795 scb_data->init_level++; 4796 4797 /* DMA tag for our sense buffers */ 4798 if (ahc_dma_tag_create(ahc, ahc->parent_dmat, /*alignment*/1, 4799 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1, 4800 /*lowaddr*/BUS_SPACE_MAXADDR_32BIT, 4801 /*highaddr*/BUS_SPACE_MAXADDR, 4802 /*filter*/NULL, /*filterarg*/NULL, 4803 AHC_SCB_MAX_ALLOC * sizeof(struct scsi_sense_data), 4804 /*nsegments*/1, 4805 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT, 4806 /*flags*/0, &scb_data->sense_dmat) != 0) { 4807 goto error_exit; 4808 } 4809 4810 scb_data->init_level++; 4811 4812 /* Allocate them */ 4813 if (ahc_dmamem_alloc(ahc, scb_data->sense_dmat, 4814 (void **)&scb_data->sense, 4815 BUS_DMA_NOWAIT, &scb_data->sense_dmamap) != 0) { 4816 goto error_exit; 4817 } 4818 4819 scb_data->init_level++; 4820 4821 /* And permanently map them */ 4822 ahc_dmamap_load(ahc, scb_data->sense_dmat, scb_data->sense_dmamap, 4823 scb_data->sense, 4824 AHC_SCB_MAX_ALLOC * sizeof(struct scsi_sense_data), 4825 ahc_dmamap_cb, &scb_data->sense_busaddr, /*flags*/0); 4826 4827 scb_data->init_level++; 4828 4829 /* DMA tag for our S/G structures. We allocate in page sized chunks */ 4830 if (ahc_dma_tag_create(ahc, ahc->parent_dmat, /*alignment*/8, 4831 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1, 4832 /*lowaddr*/BUS_SPACE_MAXADDR_32BIT, 4833 /*highaddr*/BUS_SPACE_MAXADDR, 4834 /*filter*/NULL, /*filterarg*/NULL, 4835 PAGE_SIZE, /*nsegments*/1, 4836 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT, 4837 /*flags*/0, &scb_data->sg_dmat) != 0) { 4838 goto error_exit; 4839 } 4840 4841 scb_data->init_level++; 4842 4843 /* Perform initial CCB allocation */ 4844 memset(scb_data->hscbs, 0, 4845 AHC_SCB_MAX_ALLOC * sizeof(struct hardware_scb)); 4846 ahc_alloc_scbs(ahc); 4847 4848 if (scb_data->numscbs == 0) { 4849 printk("%s: ahc_init_scbdata - " 4850 "Unable to allocate initial scbs\n", 4851 ahc_name(ahc)); 4852 goto error_exit; 4853 } 4854 4855 /* 4856 * Reserve the next queued SCB. 4857 */ 4858 ahc->next_queued_scb = ahc_get_scb(ahc); 4859 4860 /* 4861 * Note that we were successful 4862 */ 4863 return (0); 4864 4865 error_exit: 4866 4867 return (ENOMEM); 4868 } 4869 4870 static void 4871 ahc_fini_scbdata(struct ahc_softc *ahc) 4872 { 4873 struct scb_data *scb_data; 4874 4875 scb_data = ahc->scb_data; 4876 if (scb_data == NULL) 4877 return; 4878 4879 switch (scb_data->init_level) { 4880 default: 4881 case 7: 4882 { 4883 struct sg_map_node *sg_map; 4884 4885 while ((sg_map = SLIST_FIRST(&scb_data->sg_maps))!= NULL) { 4886 SLIST_REMOVE_HEAD(&scb_data->sg_maps, links); 4887 ahc_dmamap_unload(ahc, scb_data->sg_dmat, 4888 sg_map->sg_dmamap); 4889 ahc_dmamem_free(ahc, scb_data->sg_dmat, 4890 sg_map->sg_vaddr, 4891 sg_map->sg_dmamap); 4892 kfree(sg_map); 4893 } 4894 ahc_dma_tag_destroy(ahc, scb_data->sg_dmat); 4895 } 4896 fallthrough; 4897 case 6: 4898 ahc_dmamap_unload(ahc, scb_data->sense_dmat, 4899 scb_data->sense_dmamap); 4900 fallthrough; 4901 case 5: 4902 ahc_dmamem_free(ahc, scb_data->sense_dmat, scb_data->sense, 4903 scb_data->sense_dmamap); 4904 ahc_dmamap_destroy(ahc, scb_data->sense_dmat, 4905 scb_data->sense_dmamap); 4906 fallthrough; 4907 case 4: 4908 ahc_dma_tag_destroy(ahc, scb_data->sense_dmat); 4909 fallthrough; 4910 case 3: 4911 ahc_dmamap_unload(ahc, scb_data->hscb_dmat, 4912 scb_data->hscb_dmamap); 4913 fallthrough; 4914 case 2: 4915 ahc_dmamem_free(ahc, scb_data->hscb_dmat, scb_data->hscbs, 4916 scb_data->hscb_dmamap); 4917 ahc_dmamap_destroy(ahc, scb_data->hscb_dmat, 4918 scb_data->hscb_dmamap); 4919 fallthrough; 4920 case 1: 4921 ahc_dma_tag_destroy(ahc, scb_data->hscb_dmat); 4922 break; 4923 case 0: 4924 break; 4925 } 4926 kfree(scb_data->scbarray); 4927 } 4928 4929 static void 4930 ahc_alloc_scbs(struct ahc_softc *ahc) 4931 { 4932 struct scb_data *scb_data; 4933 struct scb *next_scb; 4934 struct sg_map_node *sg_map; 4935 dma_addr_t physaddr; 4936 struct ahc_dma_seg *segs; 4937 int newcount; 4938 int i; 4939 4940 scb_data = ahc->scb_data; 4941 if (scb_data->numscbs >= AHC_SCB_MAX_ALLOC) 4942 /* Can't allocate any more */ 4943 return; 4944 4945 next_scb = &scb_data->scbarray[scb_data->numscbs]; 4946 4947 sg_map = kmalloc(sizeof(*sg_map), GFP_ATOMIC); 4948 4949 if (sg_map == NULL) 4950 return; 4951 4952 /* Allocate S/G space for the next batch of SCBS */ 4953 if (ahc_dmamem_alloc(ahc, scb_data->sg_dmat, 4954 (void **)&sg_map->sg_vaddr, 4955 BUS_DMA_NOWAIT, &sg_map->sg_dmamap) != 0) { 4956 kfree(sg_map); 4957 return; 4958 } 4959 4960 SLIST_INSERT_HEAD(&scb_data->sg_maps, sg_map, links); 4961 4962 ahc_dmamap_load(ahc, scb_data->sg_dmat, sg_map->sg_dmamap, 4963 sg_map->sg_vaddr, PAGE_SIZE, ahc_dmamap_cb, 4964 &sg_map->sg_physaddr, /*flags*/0); 4965 4966 segs = sg_map->sg_vaddr; 4967 physaddr = sg_map->sg_physaddr; 4968 4969 newcount = (PAGE_SIZE / (AHC_NSEG * sizeof(struct ahc_dma_seg))); 4970 newcount = min(newcount, (AHC_SCB_MAX_ALLOC - scb_data->numscbs)); 4971 for (i = 0; i < newcount; i++) { 4972 struct scb_platform_data *pdata; 4973 4974 pdata = kmalloc(sizeof(*pdata), GFP_ATOMIC); 4975 if (pdata == NULL) 4976 break; 4977 next_scb->platform_data = pdata; 4978 next_scb->sg_map = sg_map; 4979 next_scb->sg_list = segs; 4980 /* 4981 * The sequencer always starts with the second entry. 4982 * The first entry is embedded in the scb. 4983 */ 4984 next_scb->sg_list_phys = physaddr + sizeof(struct ahc_dma_seg); 4985 next_scb->ahc_softc = ahc; 4986 next_scb->flags = SCB_FREE; 4987 next_scb->hscb = &scb_data->hscbs[scb_data->numscbs]; 4988 next_scb->hscb->tag = ahc->scb_data->numscbs; 4989 SLIST_INSERT_HEAD(&ahc->scb_data->free_scbs, 4990 next_scb, links.sle); 4991 segs += AHC_NSEG; 4992 physaddr += (AHC_NSEG * sizeof(struct ahc_dma_seg)); 4993 next_scb++; 4994 ahc->scb_data->numscbs++; 4995 } 4996 } 4997 4998 void 4999 ahc_controller_info(struct ahc_softc *ahc, char *buf) 5000 { 5001 int len; 5002 5003 len = sprintf(buf, "%s: ", ahc_chip_names[ahc->chip & AHC_CHIPID_MASK]); 5004 buf += len; 5005 if ((ahc->features & AHC_TWIN) != 0) 5006 len = sprintf(buf, "Twin Channel, A SCSI Id=%d, " 5007 "B SCSI Id=%d, primary %c, ", 5008 ahc->our_id, ahc->our_id_b, 5009 (ahc->flags & AHC_PRIMARY_CHANNEL) + 'A'); 5010 else { 5011 const char *speed; 5012 const char *type; 5013 5014 speed = ""; 5015 if ((ahc->features & AHC_ULTRA) != 0) { 5016 speed = "Ultra "; 5017 } else if ((ahc->features & AHC_DT) != 0) { 5018 speed = "Ultra160 "; 5019 } else if ((ahc->features & AHC_ULTRA2) != 0) { 5020 speed = "Ultra2 "; 5021 } 5022 if ((ahc->features & AHC_WIDE) != 0) { 5023 type = "Wide"; 5024 } else { 5025 type = "Single"; 5026 } 5027 len = sprintf(buf, "%s%s Channel %c, SCSI Id=%d, ", 5028 speed, type, ahc->channel, ahc->our_id); 5029 } 5030 buf += len; 5031 5032 if ((ahc->flags & AHC_PAGESCBS) != 0) 5033 sprintf(buf, "%d/%d SCBs", 5034 ahc->scb_data->maxhscbs, AHC_MAX_QUEUE); 5035 else 5036 sprintf(buf, "%d SCBs", ahc->scb_data->maxhscbs); 5037 } 5038 5039 int 5040 ahc_chip_init(struct ahc_softc *ahc) 5041 { 5042 int term; 5043 int error; 5044 u_int i; 5045 u_int scsi_conf; 5046 u_int scsiseq_template; 5047 uint32_t physaddr; 5048 5049 ahc_outb(ahc, SEQ_FLAGS, 0); 5050 ahc_outb(ahc, SEQ_FLAGS2, 0); 5051 5052 /* Set the SCSI Id, SXFRCTL0, SXFRCTL1, and SIMODE1, for both channels*/ 5053 if (ahc->features & AHC_TWIN) { 5054 5055 /* 5056 * Setup Channel B first. 5057 */ 5058 ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) | SELBUSB); 5059 term = (ahc->flags & AHC_TERM_ENB_B) != 0 ? STPWEN : 0; 5060 ahc_outb(ahc, SCSIID, ahc->our_id_b); 5061 scsi_conf = ahc_inb(ahc, SCSICONF + 1); 5062 ahc_outb(ahc, SXFRCTL1, (scsi_conf & (ENSPCHK|STIMESEL)) 5063 |term|ahc->seltime_b|ENSTIMER|ACTNEGEN); 5064 if ((ahc->features & AHC_ULTRA2) != 0) 5065 ahc_outb(ahc, SIMODE0, ahc_inb(ahc, SIMODE0)|ENIOERR); 5066 ahc_outb(ahc, SIMODE1, ENSELTIMO|ENSCSIRST|ENSCSIPERR); 5067 ahc_outb(ahc, SXFRCTL0, DFON|SPIOEN); 5068 5069 /* Select Channel A */ 5070 ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) & ~SELBUSB); 5071 } 5072 term = (ahc->flags & AHC_TERM_ENB_A) != 0 ? STPWEN : 0; 5073 if ((ahc->features & AHC_ULTRA2) != 0) 5074 ahc_outb(ahc, SCSIID_ULTRA2, ahc->our_id); 5075 else 5076 ahc_outb(ahc, SCSIID, ahc->our_id); 5077 scsi_conf = ahc_inb(ahc, SCSICONF); 5078 ahc_outb(ahc, SXFRCTL1, (scsi_conf & (ENSPCHK|STIMESEL)) 5079 |term|ahc->seltime 5080 |ENSTIMER|ACTNEGEN); 5081 if ((ahc->features & AHC_ULTRA2) != 0) 5082 ahc_outb(ahc, SIMODE0, ahc_inb(ahc, SIMODE0)|ENIOERR); 5083 ahc_outb(ahc, SIMODE1, ENSELTIMO|ENSCSIRST|ENSCSIPERR); 5084 ahc_outb(ahc, SXFRCTL0, DFON|SPIOEN); 5085 5086 /* There are no untagged SCBs active yet. */ 5087 for (i = 0; i < 16; i++) { 5088 ahc_unbusy_tcl(ahc, BUILD_TCL(i << 4, 0)); 5089 if ((ahc->flags & AHC_SCB_BTT) != 0) { 5090 int lun; 5091 5092 /* 5093 * The SCB based BTT allows an entry per 5094 * target and lun pair. 5095 */ 5096 for (lun = 1; lun < AHC_NUM_LUNS; lun++) 5097 ahc_unbusy_tcl(ahc, BUILD_TCL(i << 4, lun)); 5098 } 5099 } 5100 5101 /* All of our queues are empty */ 5102 for (i = 0; i < 256; i++) 5103 ahc->qoutfifo[i] = SCB_LIST_NULL; 5104 ahc_sync_qoutfifo(ahc, BUS_DMASYNC_PREREAD); 5105 5106 for (i = 0; i < 256; i++) 5107 ahc->qinfifo[i] = SCB_LIST_NULL; 5108 5109 if ((ahc->features & AHC_MULTI_TID) != 0) { 5110 ahc_outb(ahc, TARGID, 0); 5111 ahc_outb(ahc, TARGID + 1, 0); 5112 } 5113 5114 /* 5115 * Tell the sequencer where it can find our arrays in memory. 5116 */ 5117 physaddr = ahc->scb_data->hscb_busaddr; 5118 ahc_outb(ahc, HSCB_ADDR, physaddr & 0xFF); 5119 ahc_outb(ahc, HSCB_ADDR + 1, (physaddr >> 8) & 0xFF); 5120 ahc_outb(ahc, HSCB_ADDR + 2, (physaddr >> 16) & 0xFF); 5121 ahc_outb(ahc, HSCB_ADDR + 3, (physaddr >> 24) & 0xFF); 5122 5123 physaddr = ahc->shared_data_busaddr; 5124 ahc_outb(ahc, SHARED_DATA_ADDR, physaddr & 0xFF); 5125 ahc_outb(ahc, SHARED_DATA_ADDR + 1, (physaddr >> 8) & 0xFF); 5126 ahc_outb(ahc, SHARED_DATA_ADDR + 2, (physaddr >> 16) & 0xFF); 5127 ahc_outb(ahc, SHARED_DATA_ADDR + 3, (physaddr >> 24) & 0xFF); 5128 5129 /* 5130 * Initialize the group code to command length table. 5131 * This overrides the values in TARG_SCSIRATE, so only 5132 * setup the table after we have processed that information. 5133 */ 5134 ahc_outb(ahc, CMDSIZE_TABLE, 5); 5135 ahc_outb(ahc, CMDSIZE_TABLE + 1, 9); 5136 ahc_outb(ahc, CMDSIZE_TABLE + 2, 9); 5137 ahc_outb(ahc, CMDSIZE_TABLE + 3, 0); 5138 ahc_outb(ahc, CMDSIZE_TABLE + 4, 15); 5139 ahc_outb(ahc, CMDSIZE_TABLE + 5, 11); 5140 ahc_outb(ahc, CMDSIZE_TABLE + 6, 0); 5141 ahc_outb(ahc, CMDSIZE_TABLE + 7, 0); 5142 5143 if ((ahc->features & AHC_HS_MAILBOX) != 0) 5144 ahc_outb(ahc, HS_MAILBOX, 0); 5145 5146 /* Tell the sequencer of our initial queue positions */ 5147 if ((ahc->features & AHC_TARGETMODE) != 0) { 5148 ahc->tqinfifonext = 1; 5149 ahc_outb(ahc, KERNEL_TQINPOS, ahc->tqinfifonext - 1); 5150 ahc_outb(ahc, TQINPOS, ahc->tqinfifonext); 5151 } 5152 ahc->qinfifonext = 0; 5153 ahc->qoutfifonext = 0; 5154 if ((ahc->features & AHC_QUEUE_REGS) != 0) { 5155 ahc_outb(ahc, QOFF_CTLSTA, SCB_QSIZE_256); 5156 ahc_outb(ahc, HNSCB_QOFF, ahc->qinfifonext); 5157 ahc_outb(ahc, SNSCB_QOFF, ahc->qinfifonext); 5158 ahc_outb(ahc, SDSCB_QOFF, 0); 5159 } else { 5160 ahc_outb(ahc, KERNEL_QINPOS, ahc->qinfifonext); 5161 ahc_outb(ahc, QINPOS, ahc->qinfifonext); 5162 ahc_outb(ahc, QOUTPOS, ahc->qoutfifonext); 5163 } 5164 5165 /* We don't have any waiting selections */ 5166 ahc_outb(ahc, WAITING_SCBH, SCB_LIST_NULL); 5167 5168 /* Our disconnection list is empty too */ 5169 ahc_outb(ahc, DISCONNECTED_SCBH, SCB_LIST_NULL); 5170 5171 /* Message out buffer starts empty */ 5172 ahc_outb(ahc, MSG_OUT, MSG_NOOP); 5173 5174 /* 5175 * Setup the allowed SCSI Sequences based on operational mode. 5176 * If we are a target, we'll enable select in operations once 5177 * we've had a lun enabled. 5178 */ 5179 scsiseq_template = ENSELO|ENAUTOATNO|ENAUTOATNP; 5180 if ((ahc->flags & AHC_INITIATORROLE) != 0) 5181 scsiseq_template |= ENRSELI; 5182 ahc_outb(ahc, SCSISEQ_TEMPLATE, scsiseq_template); 5183 5184 /* Initialize our list of free SCBs. */ 5185 ahc_build_free_scb_list(ahc); 5186 5187 /* 5188 * Tell the sequencer which SCB will be the next one it receives. 5189 */ 5190 ahc_outb(ahc, NEXT_QUEUED_SCB, ahc->next_queued_scb->hscb->tag); 5191 5192 /* 5193 * Load the Sequencer program and Enable the adapter 5194 * in "fast" mode. 5195 */ 5196 if (bootverbose) 5197 printk("%s: Downloading Sequencer Program...", 5198 ahc_name(ahc)); 5199 5200 error = ahc_loadseq(ahc); 5201 if (error != 0) 5202 return (error); 5203 5204 if ((ahc->features & AHC_ULTRA2) != 0) { 5205 int wait; 5206 5207 /* 5208 * Wait for up to 500ms for our transceivers 5209 * to settle. If the adapter does not have 5210 * a cable attached, the transceivers may 5211 * never settle, so don't complain if we 5212 * fail here. 5213 */ 5214 for (wait = 5000; 5215 (ahc_inb(ahc, SBLKCTL) & (ENAB40|ENAB20)) == 0 && wait; 5216 wait--) 5217 ahc_delay(100); 5218 } 5219 ahc_restart(ahc); 5220 return (0); 5221 } 5222 5223 /* 5224 * Start the board, ready for normal operation 5225 */ 5226 int 5227 ahc_init(struct ahc_softc *ahc) 5228 { 5229 int max_targ; 5230 u_int i; 5231 u_int scsi_conf; 5232 u_int ultraenb; 5233 u_int discenable; 5234 u_int tagenable; 5235 size_t driver_data_size; 5236 5237 #ifdef AHC_DEBUG 5238 if ((ahc_debug & AHC_DEBUG_SEQUENCER) != 0) 5239 ahc->flags |= AHC_SEQUENCER_DEBUG; 5240 #endif 5241 5242 #ifdef AHC_PRINT_SRAM 5243 printk("Scratch Ram:"); 5244 for (i = 0x20; i < 0x5f; i++) { 5245 if (((i % 8) == 0) && (i != 0)) { 5246 printk ("\n "); 5247 } 5248 printk (" 0x%x", ahc_inb(ahc, i)); 5249 } 5250 if ((ahc->features & AHC_MORE_SRAM) != 0) { 5251 for (i = 0x70; i < 0x7f; i++) { 5252 if (((i % 8) == 0) && (i != 0)) { 5253 printk ("\n "); 5254 } 5255 printk (" 0x%x", ahc_inb(ahc, i)); 5256 } 5257 } 5258 printk ("\n"); 5259 /* 5260 * Reading uninitialized scratch ram may 5261 * generate parity errors. 5262 */ 5263 ahc_outb(ahc, CLRINT, CLRPARERR); 5264 ahc_outb(ahc, CLRINT, CLRBRKADRINT); 5265 #endif 5266 max_targ = 15; 5267 5268 /* 5269 * Assume we have a board at this stage and it has been reset. 5270 */ 5271 if ((ahc->flags & AHC_USEDEFAULTS) != 0) 5272 ahc->our_id = ahc->our_id_b = 7; 5273 5274 /* 5275 * Default to allowing initiator operations. 5276 */ 5277 ahc->flags |= AHC_INITIATORROLE; 5278 5279 /* 5280 * Only allow target mode features if this unit has them enabled. 5281 */ 5282 if ((AHC_TMODE_ENABLE & (0x1 << ahc->unit)) == 0) 5283 ahc->features &= ~AHC_TARGETMODE; 5284 5285 ahc->init_level++; 5286 5287 /* 5288 * DMA tag for our command fifos and other data in system memory 5289 * the card's sequencer must be able to access. For initiator 5290 * roles, we need to allocate space for the qinfifo and qoutfifo. 5291 * The qinfifo and qoutfifo are composed of 256 1 byte elements. 5292 * When providing for the target mode role, we must additionally 5293 * provide space for the incoming target command fifo and an extra 5294 * byte to deal with a dma bug in some chip versions. 5295 */ 5296 driver_data_size = 2 * 256 * sizeof(uint8_t); 5297 if ((ahc->features & AHC_TARGETMODE) != 0) 5298 driver_data_size += AHC_TMODE_CMDS * sizeof(struct target_cmd) 5299 + /*DMA WideOdd Bug Buffer*/1; 5300 if (ahc_dma_tag_create(ahc, ahc->parent_dmat, /*alignment*/1, 5301 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1, 5302 /*lowaddr*/BUS_SPACE_MAXADDR_32BIT, 5303 /*highaddr*/BUS_SPACE_MAXADDR, 5304 /*filter*/NULL, /*filterarg*/NULL, 5305 driver_data_size, 5306 /*nsegments*/1, 5307 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT, 5308 /*flags*/0, &ahc->shared_data_dmat) != 0) { 5309 return (ENOMEM); 5310 } 5311 5312 ahc->init_level++; 5313 5314 /* Allocation of driver data */ 5315 if (ahc_dmamem_alloc(ahc, ahc->shared_data_dmat, 5316 (void **)&ahc->qoutfifo, 5317 BUS_DMA_NOWAIT, &ahc->shared_data_dmamap) != 0) { 5318 return (ENOMEM); 5319 } 5320 5321 ahc->init_level++; 5322 5323 /* And permanently map it in */ 5324 ahc_dmamap_load(ahc, ahc->shared_data_dmat, ahc->shared_data_dmamap, 5325 ahc->qoutfifo, driver_data_size, ahc_dmamap_cb, 5326 &ahc->shared_data_busaddr, /*flags*/0); 5327 5328 if ((ahc->features & AHC_TARGETMODE) != 0) { 5329 ahc->targetcmds = (struct target_cmd *)ahc->qoutfifo; 5330 ahc->qoutfifo = (uint8_t *)&ahc->targetcmds[AHC_TMODE_CMDS]; 5331 ahc->dma_bug_buf = ahc->shared_data_busaddr 5332 + driver_data_size - 1; 5333 /* All target command blocks start out invalid. */ 5334 for (i = 0; i < AHC_TMODE_CMDS; i++) 5335 ahc->targetcmds[i].cmd_valid = 0; 5336 ahc_sync_tqinfifo(ahc, BUS_DMASYNC_PREREAD); 5337 ahc->qoutfifo = (uint8_t *)&ahc->targetcmds[256]; 5338 } 5339 ahc->qinfifo = &ahc->qoutfifo[256]; 5340 5341 ahc->init_level++; 5342 5343 /* Allocate SCB data now that buffer_dmat is initialized */ 5344 if (ahc->scb_data->maxhscbs == 0) 5345 if (ahc_init_scbdata(ahc) != 0) 5346 return (ENOMEM); 5347 5348 /* 5349 * Allocate a tstate to house information for our 5350 * initiator presence on the bus as well as the user 5351 * data for any target mode initiator. 5352 */ 5353 if (ahc_alloc_tstate(ahc, ahc->our_id, 'A') == NULL) { 5354 printk("%s: unable to allocate ahc_tmode_tstate. " 5355 "Failing attach\n", ahc_name(ahc)); 5356 return (ENOMEM); 5357 } 5358 5359 if ((ahc->features & AHC_TWIN) != 0) { 5360 if (ahc_alloc_tstate(ahc, ahc->our_id_b, 'B') == NULL) { 5361 printk("%s: unable to allocate ahc_tmode_tstate. " 5362 "Failing attach\n", ahc_name(ahc)); 5363 return (ENOMEM); 5364 } 5365 } 5366 5367 if (ahc->scb_data->maxhscbs < AHC_SCB_MAX_ALLOC) { 5368 ahc->flags |= AHC_PAGESCBS; 5369 } else { 5370 ahc->flags &= ~AHC_PAGESCBS; 5371 } 5372 5373 #ifdef AHC_DEBUG 5374 if (ahc_debug & AHC_SHOW_MISC) { 5375 printk("%s: hardware scb %u bytes; kernel scb %u bytes; " 5376 "ahc_dma %u bytes\n", 5377 ahc_name(ahc), 5378 (u_int)sizeof(struct hardware_scb), 5379 (u_int)sizeof(struct scb), 5380 (u_int)sizeof(struct ahc_dma_seg)); 5381 } 5382 #endif /* AHC_DEBUG */ 5383 5384 /* 5385 * Look at the information that board initialization or 5386 * the board bios has left us. 5387 */ 5388 if (ahc->features & AHC_TWIN) { 5389 scsi_conf = ahc_inb(ahc, SCSICONF + 1); 5390 if ((scsi_conf & RESET_SCSI) != 0 5391 && (ahc->flags & AHC_INITIATORROLE) != 0) 5392 ahc->flags |= AHC_RESET_BUS_B; 5393 } 5394 5395 scsi_conf = ahc_inb(ahc, SCSICONF); 5396 if ((scsi_conf & RESET_SCSI) != 0 5397 && (ahc->flags & AHC_INITIATORROLE) != 0) 5398 ahc->flags |= AHC_RESET_BUS_A; 5399 5400 ultraenb = 0; 5401 tagenable = ALL_TARGETS_MASK; 5402 5403 /* Grab the disconnection disable table and invert it for our needs */ 5404 if ((ahc->flags & AHC_USEDEFAULTS) != 0) { 5405 printk("%s: Host Adapter Bios disabled. Using default SCSI " 5406 "device parameters\n", ahc_name(ahc)); 5407 ahc->flags |= AHC_EXTENDED_TRANS_A|AHC_EXTENDED_TRANS_B| 5408 AHC_TERM_ENB_A|AHC_TERM_ENB_B; 5409 discenable = ALL_TARGETS_MASK; 5410 if ((ahc->features & AHC_ULTRA) != 0) 5411 ultraenb = ALL_TARGETS_MASK; 5412 } else { 5413 discenable = ~((ahc_inb(ahc, DISC_DSB + 1) << 8) 5414 | ahc_inb(ahc, DISC_DSB)); 5415 if ((ahc->features & (AHC_ULTRA|AHC_ULTRA2)) != 0) 5416 ultraenb = (ahc_inb(ahc, ULTRA_ENB + 1) << 8) 5417 | ahc_inb(ahc, ULTRA_ENB); 5418 } 5419 5420 if ((ahc->features & (AHC_WIDE|AHC_TWIN)) == 0) 5421 max_targ = 7; 5422 5423 for (i = 0; i <= max_targ; i++) { 5424 struct ahc_initiator_tinfo *tinfo; 5425 struct ahc_tmode_tstate *tstate; 5426 u_int our_id; 5427 u_int target_id; 5428 char channel; 5429 5430 channel = 'A'; 5431 our_id = ahc->our_id; 5432 target_id = i; 5433 if (i > 7 && (ahc->features & AHC_TWIN) != 0) { 5434 channel = 'B'; 5435 our_id = ahc->our_id_b; 5436 target_id = i % 8; 5437 } 5438 tinfo = ahc_fetch_transinfo(ahc, channel, our_id, 5439 target_id, &tstate); 5440 /* Default to async narrow across the board */ 5441 memset(tinfo, 0, sizeof(*tinfo)); 5442 if (ahc->flags & AHC_USEDEFAULTS) { 5443 if ((ahc->features & AHC_WIDE) != 0) 5444 tinfo->user.width = MSG_EXT_WDTR_BUS_16_BIT; 5445 5446 /* 5447 * These will be truncated when we determine the 5448 * connection type we have with the target. 5449 */ 5450 tinfo->user.period = ahc_syncrates->period; 5451 tinfo->user.offset = MAX_OFFSET; 5452 } else { 5453 u_int scsirate; 5454 uint16_t mask; 5455 5456 /* Take the settings leftover in scratch RAM. */ 5457 scsirate = ahc_inb(ahc, TARG_SCSIRATE + i); 5458 mask = (0x01 << i); 5459 if ((ahc->features & AHC_ULTRA2) != 0) { 5460 u_int offset; 5461 u_int maxsync; 5462 5463 if ((scsirate & SOFS) == 0x0F) { 5464 /* 5465 * Haven't negotiated yet, 5466 * so the format is different. 5467 */ 5468 scsirate = (scsirate & SXFR) >> 4 5469 | (ultraenb & mask) 5470 ? 0x08 : 0x0 5471 | (scsirate & WIDEXFER); 5472 offset = MAX_OFFSET_ULTRA2; 5473 } else 5474 offset = ahc_inb(ahc, TARG_OFFSET + i); 5475 if ((scsirate & ~WIDEXFER) == 0 && offset != 0) 5476 /* Set to the lowest sync rate, 5MHz */ 5477 scsirate |= 0x1c; 5478 maxsync = AHC_SYNCRATE_ULTRA2; 5479 if ((ahc->features & AHC_DT) != 0) 5480 maxsync = AHC_SYNCRATE_DT; 5481 tinfo->user.period = 5482 ahc_find_period(ahc, scsirate, maxsync); 5483 if (offset == 0) 5484 tinfo->user.period = 0; 5485 else 5486 tinfo->user.offset = MAX_OFFSET; 5487 if ((scsirate & SXFR_ULTRA2) <= 8/*10MHz*/ 5488 && (ahc->features & AHC_DT) != 0) 5489 tinfo->user.ppr_options = 5490 MSG_EXT_PPR_DT_REQ; 5491 } else if ((scsirate & SOFS) != 0) { 5492 if ((scsirate & SXFR) == 0x40 5493 && (ultraenb & mask) != 0) { 5494 /* Treat 10MHz as a non-ultra speed */ 5495 scsirate &= ~SXFR; 5496 ultraenb &= ~mask; 5497 } 5498 tinfo->user.period = 5499 ahc_find_period(ahc, scsirate, 5500 (ultraenb & mask) 5501 ? AHC_SYNCRATE_ULTRA 5502 : AHC_SYNCRATE_FAST); 5503 if (tinfo->user.period != 0) 5504 tinfo->user.offset = MAX_OFFSET; 5505 } 5506 if (tinfo->user.period == 0) 5507 tinfo->user.offset = 0; 5508 if ((scsirate & WIDEXFER) != 0 5509 && (ahc->features & AHC_WIDE) != 0) 5510 tinfo->user.width = MSG_EXT_WDTR_BUS_16_BIT; 5511 tinfo->user.protocol_version = 4; 5512 if ((ahc->features & AHC_DT) != 0) 5513 tinfo->user.transport_version = 3; 5514 else 5515 tinfo->user.transport_version = 2; 5516 tinfo->goal.protocol_version = 2; 5517 tinfo->goal.transport_version = 2; 5518 tinfo->curr.protocol_version = 2; 5519 tinfo->curr.transport_version = 2; 5520 } 5521 tstate->ultraenb = 0; 5522 } 5523 ahc->user_discenable = discenable; 5524 ahc->user_tagenable = tagenable; 5525 5526 return (ahc->bus_chip_init(ahc)); 5527 } 5528 5529 void 5530 ahc_intr_enable(struct ahc_softc *ahc, int enable) 5531 { 5532 u_int hcntrl; 5533 5534 hcntrl = ahc_inb(ahc, HCNTRL); 5535 hcntrl &= ~INTEN; 5536 ahc->pause &= ~INTEN; 5537 ahc->unpause &= ~INTEN; 5538 if (enable) { 5539 hcntrl |= INTEN; 5540 ahc->pause |= INTEN; 5541 ahc->unpause |= INTEN; 5542 } 5543 ahc_outb(ahc, HCNTRL, hcntrl); 5544 } 5545 5546 /* 5547 * Ensure that the card is paused in a location 5548 * outside of all critical sections and that all 5549 * pending work is completed prior to returning. 5550 * This routine should only be called from outside 5551 * an interrupt context. 5552 */ 5553 void 5554 ahc_pause_and_flushwork(struct ahc_softc *ahc) 5555 { 5556 int intstat; 5557 int maxloops; 5558 int paused; 5559 5560 maxloops = 1000; 5561 ahc->flags |= AHC_ALL_INTERRUPTS; 5562 paused = FALSE; 5563 do { 5564 if (paused) { 5565 ahc_unpause(ahc); 5566 /* 5567 * Give the sequencer some time to service 5568 * any active selections. 5569 */ 5570 ahc_delay(500); 5571 } 5572 ahc_intr(ahc); 5573 ahc_pause(ahc); 5574 paused = TRUE; 5575 ahc_outb(ahc, SCSISEQ, ahc_inb(ahc, SCSISEQ) & ~ENSELO); 5576 intstat = ahc_inb(ahc, INTSTAT); 5577 if ((intstat & INT_PEND) == 0) { 5578 ahc_clear_critical_section(ahc); 5579 intstat = ahc_inb(ahc, INTSTAT); 5580 } 5581 } while (--maxloops 5582 && (intstat != 0xFF || (ahc->features & AHC_REMOVABLE) == 0) 5583 && ((intstat & INT_PEND) != 0 5584 || (ahc_inb(ahc, SSTAT0) & (SELDO|SELINGO)) != 0)); 5585 if (maxloops == 0) { 5586 printk("Infinite interrupt loop, INTSTAT = %x", 5587 ahc_inb(ahc, INTSTAT)); 5588 } 5589 ahc_platform_flushwork(ahc); 5590 ahc->flags &= ~AHC_ALL_INTERRUPTS; 5591 } 5592 5593 #ifdef CONFIG_PM 5594 int 5595 ahc_suspend(struct ahc_softc *ahc) 5596 { 5597 5598 ahc_pause_and_flushwork(ahc); 5599 5600 if (LIST_FIRST(&ahc->pending_scbs) != NULL) { 5601 ahc_unpause(ahc); 5602 return (EBUSY); 5603 } 5604 5605 #ifdef AHC_TARGET_MODE 5606 /* 5607 * XXX What about ATIOs that have not yet been serviced? 5608 * Perhaps we should just refuse to be suspended if we 5609 * are acting in a target role. 5610 */ 5611 if (ahc->pending_device != NULL) { 5612 ahc_unpause(ahc); 5613 return (EBUSY); 5614 } 5615 #endif 5616 ahc_shutdown(ahc); 5617 return (0); 5618 } 5619 5620 int 5621 ahc_resume(struct ahc_softc *ahc) 5622 { 5623 5624 ahc_reset(ahc, /*reinit*/TRUE); 5625 ahc_intr_enable(ahc, TRUE); 5626 ahc_restart(ahc); 5627 return (0); 5628 } 5629 #endif 5630 /************************** Busy Target Table *********************************/ 5631 /* 5632 * Return the untagged transaction id for a given target/channel lun. 5633 * Optionally, clear the entry. 5634 */ 5635 static u_int 5636 ahc_index_busy_tcl(struct ahc_softc *ahc, u_int tcl) 5637 { 5638 u_int scbid; 5639 u_int target_offset; 5640 5641 if ((ahc->flags & AHC_SCB_BTT) != 0) { 5642 u_int saved_scbptr; 5643 5644 saved_scbptr = ahc_inb(ahc, SCBPTR); 5645 ahc_outb(ahc, SCBPTR, TCL_LUN(tcl)); 5646 scbid = ahc_inb(ahc, SCB_64_BTT + TCL_TARGET_OFFSET(tcl)); 5647 ahc_outb(ahc, SCBPTR, saved_scbptr); 5648 } else { 5649 target_offset = TCL_TARGET_OFFSET(tcl); 5650 scbid = ahc_inb(ahc, BUSY_TARGETS + target_offset); 5651 } 5652 5653 return (scbid); 5654 } 5655 5656 static void 5657 ahc_unbusy_tcl(struct ahc_softc *ahc, u_int tcl) 5658 { 5659 u_int target_offset; 5660 5661 if ((ahc->flags & AHC_SCB_BTT) != 0) { 5662 u_int saved_scbptr; 5663 5664 saved_scbptr = ahc_inb(ahc, SCBPTR); 5665 ahc_outb(ahc, SCBPTR, TCL_LUN(tcl)); 5666 ahc_outb(ahc, SCB_64_BTT+TCL_TARGET_OFFSET(tcl), SCB_LIST_NULL); 5667 ahc_outb(ahc, SCBPTR, saved_scbptr); 5668 } else { 5669 target_offset = TCL_TARGET_OFFSET(tcl); 5670 ahc_outb(ahc, BUSY_TARGETS + target_offset, SCB_LIST_NULL); 5671 } 5672 } 5673 5674 static void 5675 ahc_busy_tcl(struct ahc_softc *ahc, u_int tcl, u_int scbid) 5676 { 5677 u_int target_offset; 5678 5679 if ((ahc->flags & AHC_SCB_BTT) != 0) { 5680 u_int saved_scbptr; 5681 5682 saved_scbptr = ahc_inb(ahc, SCBPTR); 5683 ahc_outb(ahc, SCBPTR, TCL_LUN(tcl)); 5684 ahc_outb(ahc, SCB_64_BTT + TCL_TARGET_OFFSET(tcl), scbid); 5685 ahc_outb(ahc, SCBPTR, saved_scbptr); 5686 } else { 5687 target_offset = TCL_TARGET_OFFSET(tcl); 5688 ahc_outb(ahc, BUSY_TARGETS + target_offset, scbid); 5689 } 5690 } 5691 5692 /************************** SCB and SCB queue management **********************/ 5693 int 5694 ahc_match_scb(struct ahc_softc *ahc, struct scb *scb, int target, 5695 char channel, int lun, u_int tag, role_t role) 5696 { 5697 int targ = SCB_GET_TARGET(ahc, scb); 5698 char chan = SCB_GET_CHANNEL(ahc, scb); 5699 int slun = SCB_GET_LUN(scb); 5700 int match; 5701 5702 match = ((chan == channel) || (channel == ALL_CHANNELS)); 5703 if (match != 0) 5704 match = ((targ == target) || (target == CAM_TARGET_WILDCARD)); 5705 if (match != 0) 5706 match = ((lun == slun) || (lun == CAM_LUN_WILDCARD)); 5707 if (match != 0) { 5708 #ifdef AHC_TARGET_MODE 5709 int group; 5710 5711 group = XPT_FC_GROUP(scb->io_ctx->ccb_h.func_code); 5712 if (role == ROLE_INITIATOR) { 5713 match = (group != XPT_FC_GROUP_TMODE) 5714 && ((tag == scb->hscb->tag) 5715 || (tag == SCB_LIST_NULL)); 5716 } else if (role == ROLE_TARGET) { 5717 match = (group == XPT_FC_GROUP_TMODE) 5718 && ((tag == scb->io_ctx->csio.tag_id) 5719 || (tag == SCB_LIST_NULL)); 5720 } 5721 #else /* !AHC_TARGET_MODE */ 5722 match = ((tag == scb->hscb->tag) || (tag == SCB_LIST_NULL)); 5723 #endif /* AHC_TARGET_MODE */ 5724 } 5725 5726 return match; 5727 } 5728 5729 static void 5730 ahc_freeze_devq(struct ahc_softc *ahc, struct scb *scb) 5731 { 5732 int target; 5733 char channel; 5734 int lun; 5735 5736 target = SCB_GET_TARGET(ahc, scb); 5737 lun = SCB_GET_LUN(scb); 5738 channel = SCB_GET_CHANNEL(ahc, scb); 5739 5740 ahc_search_qinfifo(ahc, target, channel, lun, 5741 /*tag*/SCB_LIST_NULL, ROLE_UNKNOWN, 5742 CAM_REQUEUE_REQ, SEARCH_COMPLETE); 5743 5744 ahc_platform_freeze_devq(ahc, scb); 5745 } 5746 5747 void 5748 ahc_qinfifo_requeue_tail(struct ahc_softc *ahc, struct scb *scb) 5749 { 5750 struct scb *prev_scb; 5751 5752 prev_scb = NULL; 5753 if (ahc_qinfifo_count(ahc) != 0) { 5754 u_int prev_tag; 5755 uint8_t prev_pos; 5756 5757 prev_pos = ahc->qinfifonext - 1; 5758 prev_tag = ahc->qinfifo[prev_pos]; 5759 prev_scb = ahc_lookup_scb(ahc, prev_tag); 5760 } 5761 ahc_qinfifo_requeue(ahc, prev_scb, scb); 5762 if ((ahc->features & AHC_QUEUE_REGS) != 0) { 5763 ahc_outb(ahc, HNSCB_QOFF, ahc->qinfifonext); 5764 } else { 5765 ahc_outb(ahc, KERNEL_QINPOS, ahc->qinfifonext); 5766 } 5767 } 5768 5769 static void 5770 ahc_qinfifo_requeue(struct ahc_softc *ahc, struct scb *prev_scb, 5771 struct scb *scb) 5772 { 5773 if (prev_scb == NULL) { 5774 ahc_outb(ahc, NEXT_QUEUED_SCB, scb->hscb->tag); 5775 } else { 5776 prev_scb->hscb->next = scb->hscb->tag; 5777 ahc_sync_scb(ahc, prev_scb, 5778 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 5779 } 5780 ahc->qinfifo[ahc->qinfifonext++] = scb->hscb->tag; 5781 scb->hscb->next = ahc->next_queued_scb->hscb->tag; 5782 ahc_sync_scb(ahc, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 5783 } 5784 5785 static int 5786 ahc_qinfifo_count(struct ahc_softc *ahc) 5787 { 5788 uint8_t qinpos; 5789 uint8_t diff; 5790 5791 if ((ahc->features & AHC_QUEUE_REGS) != 0) { 5792 qinpos = ahc_inb(ahc, SNSCB_QOFF); 5793 ahc_outb(ahc, SNSCB_QOFF, qinpos); 5794 } else 5795 qinpos = ahc_inb(ahc, QINPOS); 5796 diff = ahc->qinfifonext - qinpos; 5797 return (diff); 5798 } 5799 5800 int 5801 ahc_search_qinfifo(struct ahc_softc *ahc, int target, char channel, 5802 int lun, u_int tag, role_t role, uint32_t status, 5803 ahc_search_action action) 5804 { 5805 struct scb *scb; 5806 struct scb *prev_scb; 5807 uint8_t qinstart; 5808 uint8_t qinpos; 5809 uint8_t qintail; 5810 uint8_t next; 5811 uint8_t prev; 5812 uint8_t curscbptr; 5813 int found; 5814 int have_qregs; 5815 5816 qintail = ahc->qinfifonext; 5817 have_qregs = (ahc->features & AHC_QUEUE_REGS) != 0; 5818 if (have_qregs) { 5819 qinstart = ahc_inb(ahc, SNSCB_QOFF); 5820 ahc_outb(ahc, SNSCB_QOFF, qinstart); 5821 } else 5822 qinstart = ahc_inb(ahc, QINPOS); 5823 qinpos = qinstart; 5824 found = 0; 5825 prev_scb = NULL; 5826 5827 if (action == SEARCH_COMPLETE) { 5828 /* 5829 * Don't attempt to run any queued untagged transactions 5830 * until we are done with the abort process. 5831 */ 5832 ahc_freeze_untagged_queues(ahc); 5833 } 5834 5835 /* 5836 * Start with an empty queue. Entries that are not chosen 5837 * for removal will be re-added to the queue as we go. 5838 */ 5839 ahc->qinfifonext = qinpos; 5840 ahc_outb(ahc, NEXT_QUEUED_SCB, ahc->next_queued_scb->hscb->tag); 5841 5842 while (qinpos != qintail) { 5843 scb = ahc_lookup_scb(ahc, ahc->qinfifo[qinpos]); 5844 if (scb == NULL) { 5845 printk("qinpos = %d, SCB index = %d\n", 5846 qinpos, ahc->qinfifo[qinpos]); 5847 panic("Loop 1\n"); 5848 } 5849 5850 if (ahc_match_scb(ahc, scb, target, channel, lun, tag, role)) { 5851 /* 5852 * We found an scb that needs to be acted on. 5853 */ 5854 found++; 5855 switch (action) { 5856 case SEARCH_COMPLETE: 5857 { 5858 cam_status ostat; 5859 cam_status cstat; 5860 5861 ostat = ahc_get_transaction_status(scb); 5862 if (ostat == CAM_REQ_INPROG) 5863 ahc_set_transaction_status(scb, status); 5864 cstat = ahc_get_transaction_status(scb); 5865 if (cstat != CAM_REQ_CMP) 5866 ahc_freeze_scb(scb); 5867 if ((scb->flags & SCB_ACTIVE) == 0) 5868 printk("Inactive SCB in qinfifo\n"); 5869 ahc_done(ahc, scb); 5870 5871 /* FALLTHROUGH */ 5872 } 5873 case SEARCH_REMOVE: 5874 break; 5875 case SEARCH_COUNT: 5876 ahc_qinfifo_requeue(ahc, prev_scb, scb); 5877 prev_scb = scb; 5878 break; 5879 } 5880 } else { 5881 ahc_qinfifo_requeue(ahc, prev_scb, scb); 5882 prev_scb = scb; 5883 } 5884 qinpos++; 5885 } 5886 5887 if ((ahc->features & AHC_QUEUE_REGS) != 0) { 5888 ahc_outb(ahc, HNSCB_QOFF, ahc->qinfifonext); 5889 } else { 5890 ahc_outb(ahc, KERNEL_QINPOS, ahc->qinfifonext); 5891 } 5892 5893 if (action != SEARCH_COUNT 5894 && (found != 0) 5895 && (qinstart != ahc->qinfifonext)) { 5896 /* 5897 * The sequencer may be in the process of dmaing 5898 * down the SCB at the beginning of the queue. 5899 * This could be problematic if either the first, 5900 * or the second SCB is removed from the queue 5901 * (the first SCB includes a pointer to the "next" 5902 * SCB to dma). If we have removed any entries, swap 5903 * the first element in the queue with the next HSCB 5904 * so the sequencer will notice that NEXT_QUEUED_SCB 5905 * has changed during its dma attempt and will retry 5906 * the DMA. 5907 */ 5908 scb = ahc_lookup_scb(ahc, ahc->qinfifo[qinstart]); 5909 5910 if (scb == NULL) { 5911 printk("found = %d, qinstart = %d, qinfifionext = %d\n", 5912 found, qinstart, ahc->qinfifonext); 5913 panic("First/Second Qinfifo fixup\n"); 5914 } 5915 /* 5916 * ahc_swap_with_next_hscb forces our next pointer to 5917 * point to the reserved SCB for future commands. Save 5918 * and restore our original next pointer to maintain 5919 * queue integrity. 5920 */ 5921 next = scb->hscb->next; 5922 ahc->scb_data->scbindex[scb->hscb->tag] = NULL; 5923 ahc_swap_with_next_hscb(ahc, scb); 5924 scb->hscb->next = next; 5925 ahc->qinfifo[qinstart] = scb->hscb->tag; 5926 5927 /* Tell the card about the new head of the qinfifo. */ 5928 ahc_outb(ahc, NEXT_QUEUED_SCB, scb->hscb->tag); 5929 5930 /* Fixup the tail "next" pointer. */ 5931 qintail = ahc->qinfifonext - 1; 5932 scb = ahc_lookup_scb(ahc, ahc->qinfifo[qintail]); 5933 scb->hscb->next = ahc->next_queued_scb->hscb->tag; 5934 } 5935 5936 /* 5937 * Search waiting for selection list. 5938 */ 5939 curscbptr = ahc_inb(ahc, SCBPTR); 5940 next = ahc_inb(ahc, WAITING_SCBH); /* Start at head of list. */ 5941 prev = SCB_LIST_NULL; 5942 5943 while (next != SCB_LIST_NULL) { 5944 uint8_t scb_index; 5945 5946 ahc_outb(ahc, SCBPTR, next); 5947 scb_index = ahc_inb(ahc, SCB_TAG); 5948 if (scb_index >= ahc->scb_data->numscbs) { 5949 printk("Waiting List inconsistency. " 5950 "SCB index == %d, yet numscbs == %d.", 5951 scb_index, ahc->scb_data->numscbs); 5952 ahc_dump_card_state(ahc); 5953 panic("for safety"); 5954 } 5955 scb = ahc_lookup_scb(ahc, scb_index); 5956 if (scb == NULL) { 5957 printk("scb_index = %d, next = %d\n", 5958 scb_index, next); 5959 panic("Waiting List traversal\n"); 5960 } 5961 if (ahc_match_scb(ahc, scb, target, channel, 5962 lun, SCB_LIST_NULL, role)) { 5963 /* 5964 * We found an scb that needs to be acted on. 5965 */ 5966 found++; 5967 switch (action) { 5968 case SEARCH_COMPLETE: 5969 { 5970 cam_status ostat; 5971 cam_status cstat; 5972 5973 ostat = ahc_get_transaction_status(scb); 5974 if (ostat == CAM_REQ_INPROG) 5975 ahc_set_transaction_status(scb, 5976 status); 5977 cstat = ahc_get_transaction_status(scb); 5978 if (cstat != CAM_REQ_CMP) 5979 ahc_freeze_scb(scb); 5980 if ((scb->flags & SCB_ACTIVE) == 0) 5981 printk("Inactive SCB in Waiting List\n"); 5982 ahc_done(ahc, scb); 5983 } 5984 fallthrough; 5985 case SEARCH_REMOVE: 5986 next = ahc_rem_wscb(ahc, next, prev); 5987 break; 5988 case SEARCH_COUNT: 5989 prev = next; 5990 next = ahc_inb(ahc, SCB_NEXT); 5991 break; 5992 } 5993 } else { 5994 5995 prev = next; 5996 next = ahc_inb(ahc, SCB_NEXT); 5997 } 5998 } 5999 ahc_outb(ahc, SCBPTR, curscbptr); 6000 6001 found += ahc_search_untagged_queues(ahc, /*ahc_io_ctx_t*/NULL, target, 6002 channel, lun, status, action); 6003 6004 if (action == SEARCH_COMPLETE) 6005 ahc_release_untagged_queues(ahc); 6006 return (found); 6007 } 6008 6009 int 6010 ahc_search_untagged_queues(struct ahc_softc *ahc, ahc_io_ctx_t ctx, 6011 int target, char channel, int lun, uint32_t status, 6012 ahc_search_action action) 6013 { 6014 struct scb *scb; 6015 int maxtarget; 6016 int found; 6017 int i; 6018 6019 if (action == SEARCH_COMPLETE) { 6020 /* 6021 * Don't attempt to run any queued untagged transactions 6022 * until we are done with the abort process. 6023 */ 6024 ahc_freeze_untagged_queues(ahc); 6025 } 6026 6027 found = 0; 6028 i = 0; 6029 if ((ahc->flags & AHC_SCB_BTT) == 0) { 6030 6031 maxtarget = 16; 6032 if (target != CAM_TARGET_WILDCARD) { 6033 6034 i = target; 6035 if (channel == 'B') 6036 i += 8; 6037 maxtarget = i + 1; 6038 } 6039 } else { 6040 maxtarget = 0; 6041 } 6042 6043 for (; i < maxtarget; i++) { 6044 struct scb_tailq *untagged_q; 6045 struct scb *next_scb; 6046 6047 untagged_q = &(ahc->untagged_queues[i]); 6048 next_scb = TAILQ_FIRST(untagged_q); 6049 while (next_scb != NULL) { 6050 6051 scb = next_scb; 6052 next_scb = TAILQ_NEXT(scb, links.tqe); 6053 6054 /* 6055 * The head of the list may be the currently 6056 * active untagged command for a device. 6057 * We're only searching for commands that 6058 * have not been started. A transaction 6059 * marked active but still in the qinfifo 6060 * is removed by the qinfifo scanning code 6061 * above. 6062 */ 6063 if ((scb->flags & SCB_ACTIVE) != 0) 6064 continue; 6065 6066 if (ahc_match_scb(ahc, scb, target, channel, lun, 6067 SCB_LIST_NULL, ROLE_INITIATOR) == 0 6068 || (ctx != NULL && ctx != scb->io_ctx)) 6069 continue; 6070 6071 /* 6072 * We found an scb that needs to be acted on. 6073 */ 6074 found++; 6075 switch (action) { 6076 case SEARCH_COMPLETE: 6077 { 6078 cam_status ostat; 6079 cam_status cstat; 6080 6081 ostat = ahc_get_transaction_status(scb); 6082 if (ostat == CAM_REQ_INPROG) 6083 ahc_set_transaction_status(scb, status); 6084 cstat = ahc_get_transaction_status(scb); 6085 if (cstat != CAM_REQ_CMP) 6086 ahc_freeze_scb(scb); 6087 if ((scb->flags & SCB_ACTIVE) == 0) 6088 printk("Inactive SCB in untaggedQ\n"); 6089 ahc_done(ahc, scb); 6090 break; 6091 } 6092 case SEARCH_REMOVE: 6093 scb->flags &= ~SCB_UNTAGGEDQ; 6094 TAILQ_REMOVE(untagged_q, scb, links.tqe); 6095 break; 6096 case SEARCH_COUNT: 6097 break; 6098 } 6099 } 6100 } 6101 6102 if (action == SEARCH_COMPLETE) 6103 ahc_release_untagged_queues(ahc); 6104 return (found); 6105 } 6106 6107 int 6108 ahc_search_disc_list(struct ahc_softc *ahc, int target, char channel, 6109 int lun, u_int tag, int stop_on_first, int remove, 6110 int save_state) 6111 { 6112 struct scb *scbp; 6113 u_int next; 6114 u_int prev; 6115 u_int count; 6116 u_int active_scb; 6117 6118 count = 0; 6119 next = ahc_inb(ahc, DISCONNECTED_SCBH); 6120 prev = SCB_LIST_NULL; 6121 6122 if (save_state) { 6123 /* restore this when we're done */ 6124 active_scb = ahc_inb(ahc, SCBPTR); 6125 } else 6126 /* Silence compiler */ 6127 active_scb = SCB_LIST_NULL; 6128 6129 while (next != SCB_LIST_NULL) { 6130 u_int scb_index; 6131 6132 ahc_outb(ahc, SCBPTR, next); 6133 scb_index = ahc_inb(ahc, SCB_TAG); 6134 if (scb_index >= ahc->scb_data->numscbs) { 6135 printk("Disconnected List inconsistency. " 6136 "SCB index == %d, yet numscbs == %d.", 6137 scb_index, ahc->scb_data->numscbs); 6138 ahc_dump_card_state(ahc); 6139 panic("for safety"); 6140 } 6141 6142 if (next == prev) { 6143 panic("Disconnected List Loop. " 6144 "cur SCBPTR == %x, prev SCBPTR == %x.", 6145 next, prev); 6146 } 6147 scbp = ahc_lookup_scb(ahc, scb_index); 6148 if (ahc_match_scb(ahc, scbp, target, channel, lun, 6149 tag, ROLE_INITIATOR)) { 6150 count++; 6151 if (remove) { 6152 next = 6153 ahc_rem_scb_from_disc_list(ahc, prev, next); 6154 } else { 6155 prev = next; 6156 next = ahc_inb(ahc, SCB_NEXT); 6157 } 6158 if (stop_on_first) 6159 break; 6160 } else { 6161 prev = next; 6162 next = ahc_inb(ahc, SCB_NEXT); 6163 } 6164 } 6165 if (save_state) 6166 ahc_outb(ahc, SCBPTR, active_scb); 6167 return (count); 6168 } 6169 6170 /* 6171 * Remove an SCB from the on chip list of disconnected transactions. 6172 * This is empty/unused if we are not performing SCB paging. 6173 */ 6174 static u_int 6175 ahc_rem_scb_from_disc_list(struct ahc_softc *ahc, u_int prev, u_int scbptr) 6176 { 6177 u_int next; 6178 6179 ahc_outb(ahc, SCBPTR, scbptr); 6180 next = ahc_inb(ahc, SCB_NEXT); 6181 6182 ahc_outb(ahc, SCB_CONTROL, 0); 6183 6184 ahc_add_curscb_to_free_list(ahc); 6185 6186 if (prev != SCB_LIST_NULL) { 6187 ahc_outb(ahc, SCBPTR, prev); 6188 ahc_outb(ahc, SCB_NEXT, next); 6189 } else 6190 ahc_outb(ahc, DISCONNECTED_SCBH, next); 6191 6192 return (next); 6193 } 6194 6195 /* 6196 * Add the SCB as selected by SCBPTR onto the on chip list of 6197 * free hardware SCBs. This list is empty/unused if we are not 6198 * performing SCB paging. 6199 */ 6200 static void 6201 ahc_add_curscb_to_free_list(struct ahc_softc *ahc) 6202 { 6203 /* 6204 * Invalidate the tag so that our abort 6205 * routines don't think it's active. 6206 */ 6207 ahc_outb(ahc, SCB_TAG, SCB_LIST_NULL); 6208 6209 if ((ahc->flags & AHC_PAGESCBS) != 0) { 6210 ahc_outb(ahc, SCB_NEXT, ahc_inb(ahc, FREE_SCBH)); 6211 ahc_outb(ahc, FREE_SCBH, ahc_inb(ahc, SCBPTR)); 6212 } 6213 } 6214 6215 /* 6216 * Manipulate the waiting for selection list and return the 6217 * scb that follows the one that we remove. 6218 */ 6219 static u_int 6220 ahc_rem_wscb(struct ahc_softc *ahc, u_int scbpos, u_int prev) 6221 { 6222 u_int curscb, next; 6223 6224 /* 6225 * Select the SCB we want to abort and 6226 * pull the next pointer out of it. 6227 */ 6228 curscb = ahc_inb(ahc, SCBPTR); 6229 ahc_outb(ahc, SCBPTR, scbpos); 6230 next = ahc_inb(ahc, SCB_NEXT); 6231 6232 /* Clear the necessary fields */ 6233 ahc_outb(ahc, SCB_CONTROL, 0); 6234 6235 ahc_add_curscb_to_free_list(ahc); 6236 6237 /* update the waiting list */ 6238 if (prev == SCB_LIST_NULL) { 6239 /* First in the list */ 6240 ahc_outb(ahc, WAITING_SCBH, next); 6241 6242 /* 6243 * Ensure we aren't attempting to perform 6244 * selection for this entry. 6245 */ 6246 ahc_outb(ahc, SCSISEQ, (ahc_inb(ahc, SCSISEQ) & ~ENSELO)); 6247 } else { 6248 /* 6249 * Select the scb that pointed to us 6250 * and update its next pointer. 6251 */ 6252 ahc_outb(ahc, SCBPTR, prev); 6253 ahc_outb(ahc, SCB_NEXT, next); 6254 } 6255 6256 /* 6257 * Point us back at the original scb position. 6258 */ 6259 ahc_outb(ahc, SCBPTR, curscb); 6260 return next; 6261 } 6262 6263 /******************************** Error Handling ******************************/ 6264 /* 6265 * Abort all SCBs that match the given description (target/channel/lun/tag), 6266 * setting their status to the passed in status if the status has not already 6267 * been modified from CAM_REQ_INPROG. This routine assumes that the sequencer 6268 * is paused before it is called. 6269 */ 6270 static int 6271 ahc_abort_scbs(struct ahc_softc *ahc, int target, char channel, 6272 int lun, u_int tag, role_t role, uint32_t status) 6273 { 6274 struct scb *scbp; 6275 struct scb *scbp_next; 6276 u_int active_scb; 6277 int i, j; 6278 int maxtarget; 6279 int minlun; 6280 int maxlun; 6281 6282 int found; 6283 6284 /* 6285 * Don't attempt to run any queued untagged transactions 6286 * until we are done with the abort process. 6287 */ 6288 ahc_freeze_untagged_queues(ahc); 6289 6290 /* restore this when we're done */ 6291 active_scb = ahc_inb(ahc, SCBPTR); 6292 6293 found = ahc_search_qinfifo(ahc, target, channel, lun, SCB_LIST_NULL, 6294 role, CAM_REQUEUE_REQ, SEARCH_COMPLETE); 6295 6296 /* 6297 * Clean out the busy target table for any untagged commands. 6298 */ 6299 i = 0; 6300 maxtarget = 16; 6301 if (target != CAM_TARGET_WILDCARD) { 6302 i = target; 6303 if (channel == 'B') 6304 i += 8; 6305 maxtarget = i + 1; 6306 } 6307 6308 if (lun == CAM_LUN_WILDCARD) { 6309 6310 /* 6311 * Unless we are using an SCB based 6312 * busy targets table, there is only 6313 * one table entry for all luns of 6314 * a target. 6315 */ 6316 minlun = 0; 6317 maxlun = 1; 6318 if ((ahc->flags & AHC_SCB_BTT) != 0) 6319 maxlun = AHC_NUM_LUNS; 6320 } else { 6321 minlun = lun; 6322 maxlun = lun + 1; 6323 } 6324 6325 if (role != ROLE_TARGET) { 6326 for (;i < maxtarget; i++) { 6327 for (j = minlun;j < maxlun; j++) { 6328 u_int scbid; 6329 u_int tcl; 6330 6331 tcl = BUILD_TCL(i << 4, j); 6332 scbid = ahc_index_busy_tcl(ahc, tcl); 6333 scbp = ahc_lookup_scb(ahc, scbid); 6334 if (scbp == NULL 6335 || ahc_match_scb(ahc, scbp, target, channel, 6336 lun, tag, role) == 0) 6337 continue; 6338 ahc_unbusy_tcl(ahc, BUILD_TCL(i << 4, j)); 6339 } 6340 } 6341 6342 /* 6343 * Go through the disconnected list and remove any entries we 6344 * have queued for completion, 0'ing their control byte too. 6345 * We save the active SCB and restore it ourselves, so there 6346 * is no reason for this search to restore it too. 6347 */ 6348 ahc_search_disc_list(ahc, target, channel, lun, tag, 6349 /*stop_on_first*/FALSE, /*remove*/TRUE, 6350 /*save_state*/FALSE); 6351 } 6352 6353 /* 6354 * Go through the hardware SCB array looking for commands that 6355 * were active but not on any list. In some cases, these remnants 6356 * might not still have mappings in the scbindex array (e.g. unexpected 6357 * bus free with the same scb queued for an abort). Don't hold this 6358 * against them. 6359 */ 6360 for (i = 0; i < ahc->scb_data->maxhscbs; i++) { 6361 u_int scbid; 6362 6363 ahc_outb(ahc, SCBPTR, i); 6364 scbid = ahc_inb(ahc, SCB_TAG); 6365 scbp = ahc_lookup_scb(ahc, scbid); 6366 if ((scbp == NULL && scbid != SCB_LIST_NULL) 6367 || (scbp != NULL 6368 && ahc_match_scb(ahc, scbp, target, channel, lun, tag, role))) 6369 ahc_add_curscb_to_free_list(ahc); 6370 } 6371 6372 /* 6373 * Go through the pending CCB list and look for 6374 * commands for this target that are still active. 6375 * These are other tagged commands that were 6376 * disconnected when the reset occurred. 6377 */ 6378 scbp_next = LIST_FIRST(&ahc->pending_scbs); 6379 while (scbp_next != NULL) { 6380 scbp = scbp_next; 6381 scbp_next = LIST_NEXT(scbp, pending_links); 6382 if (ahc_match_scb(ahc, scbp, target, channel, lun, tag, role)) { 6383 cam_status ostat; 6384 6385 ostat = ahc_get_transaction_status(scbp); 6386 if (ostat == CAM_REQ_INPROG) 6387 ahc_set_transaction_status(scbp, status); 6388 if (ahc_get_transaction_status(scbp) != CAM_REQ_CMP) 6389 ahc_freeze_scb(scbp); 6390 if ((scbp->flags & SCB_ACTIVE) == 0) 6391 printk("Inactive SCB on pending list\n"); 6392 ahc_done(ahc, scbp); 6393 found++; 6394 } 6395 } 6396 ahc_outb(ahc, SCBPTR, active_scb); 6397 ahc_platform_abort_scbs(ahc, target, channel, lun, tag, role, status); 6398 ahc_release_untagged_queues(ahc); 6399 return found; 6400 } 6401 6402 static void 6403 ahc_reset_current_bus(struct ahc_softc *ahc) 6404 { 6405 uint8_t scsiseq; 6406 6407 ahc_outb(ahc, SIMODE1, ahc_inb(ahc, SIMODE1) & ~ENSCSIRST); 6408 scsiseq = ahc_inb(ahc, SCSISEQ); 6409 ahc_outb(ahc, SCSISEQ, scsiseq | SCSIRSTO); 6410 ahc_flush_device_writes(ahc); 6411 ahc_delay(AHC_BUSRESET_DELAY); 6412 /* Turn off the bus reset */ 6413 ahc_outb(ahc, SCSISEQ, scsiseq & ~SCSIRSTO); 6414 6415 ahc_clear_intstat(ahc); 6416 6417 /* Re-enable reset interrupts */ 6418 ahc_outb(ahc, SIMODE1, ahc_inb(ahc, SIMODE1) | ENSCSIRST); 6419 } 6420 6421 int 6422 ahc_reset_channel(struct ahc_softc *ahc, char channel, int initiate_reset) 6423 { 6424 struct ahc_devinfo devinfo; 6425 u_int initiator, target, max_scsiid; 6426 u_int sblkctl; 6427 u_int scsiseq; 6428 u_int simode1; 6429 int found; 6430 int restart_needed; 6431 char cur_channel; 6432 6433 ahc->pending_device = NULL; 6434 6435 ahc_compile_devinfo(&devinfo, 6436 CAM_TARGET_WILDCARD, 6437 CAM_TARGET_WILDCARD, 6438 CAM_LUN_WILDCARD, 6439 channel, ROLE_UNKNOWN); 6440 ahc_pause(ahc); 6441 6442 /* Make sure the sequencer is in a safe location. */ 6443 ahc_clear_critical_section(ahc); 6444 6445 /* 6446 * Run our command complete fifos to ensure that we perform 6447 * completion processing on any commands that 'completed' 6448 * before the reset occurred. 6449 */ 6450 ahc_run_qoutfifo(ahc); 6451 #ifdef AHC_TARGET_MODE 6452 /* 6453 * XXX - In Twin mode, the tqinfifo may have commands 6454 * for an unaffected channel in it. However, if 6455 * we have run out of ATIO resources to drain that 6456 * queue, we may not get them all out here. Further, 6457 * the blocked transactions for the reset channel 6458 * should just be killed off, irrespecitve of whether 6459 * we are blocked on ATIO resources. Write a routine 6460 * to compact the tqinfifo appropriately. 6461 */ 6462 if ((ahc->flags & AHC_TARGETROLE) != 0) { 6463 ahc_run_tqinfifo(ahc, /*paused*/TRUE); 6464 } 6465 #endif 6466 6467 /* 6468 * Reset the bus if we are initiating this reset 6469 */ 6470 sblkctl = ahc_inb(ahc, SBLKCTL); 6471 cur_channel = 'A'; 6472 if ((ahc->features & AHC_TWIN) != 0 6473 && ((sblkctl & SELBUSB) != 0)) 6474 cur_channel = 'B'; 6475 scsiseq = ahc_inb(ahc, SCSISEQ_TEMPLATE); 6476 if (cur_channel != channel) { 6477 /* Case 1: Command for another bus is active 6478 * Stealthily reset the other bus without 6479 * upsetting the current bus. 6480 */ 6481 ahc_outb(ahc, SBLKCTL, sblkctl ^ SELBUSB); 6482 simode1 = ahc_inb(ahc, SIMODE1) & ~(ENBUSFREE|ENSCSIRST); 6483 #ifdef AHC_TARGET_MODE 6484 /* 6485 * Bus resets clear ENSELI, so we cannot 6486 * defer re-enabling bus reset interrupts 6487 * if we are in target mode. 6488 */ 6489 if ((ahc->flags & AHC_TARGETROLE) != 0) 6490 simode1 |= ENSCSIRST; 6491 #endif 6492 ahc_outb(ahc, SIMODE1, simode1); 6493 if (initiate_reset) 6494 ahc_reset_current_bus(ahc); 6495 ahc_clear_intstat(ahc); 6496 ahc_outb(ahc, SCSISEQ, scsiseq & (ENSELI|ENRSELI|ENAUTOATNP)); 6497 ahc_outb(ahc, SBLKCTL, sblkctl); 6498 restart_needed = FALSE; 6499 } else { 6500 /* Case 2: A command from this bus is active or we're idle */ 6501 simode1 = ahc_inb(ahc, SIMODE1) & ~(ENBUSFREE|ENSCSIRST); 6502 #ifdef AHC_TARGET_MODE 6503 /* 6504 * Bus resets clear ENSELI, so we cannot 6505 * defer re-enabling bus reset interrupts 6506 * if we are in target mode. 6507 */ 6508 if ((ahc->flags & AHC_TARGETROLE) != 0) 6509 simode1 |= ENSCSIRST; 6510 #endif 6511 ahc_outb(ahc, SIMODE1, simode1); 6512 if (initiate_reset) 6513 ahc_reset_current_bus(ahc); 6514 ahc_clear_intstat(ahc); 6515 ahc_outb(ahc, SCSISEQ, scsiseq & (ENSELI|ENRSELI|ENAUTOATNP)); 6516 restart_needed = TRUE; 6517 } 6518 6519 /* 6520 * Clean up all the state information for the 6521 * pending transactions on this bus. 6522 */ 6523 found = ahc_abort_scbs(ahc, CAM_TARGET_WILDCARD, channel, 6524 CAM_LUN_WILDCARD, SCB_LIST_NULL, 6525 ROLE_UNKNOWN, CAM_SCSI_BUS_RESET); 6526 6527 max_scsiid = (ahc->features & AHC_WIDE) ? 15 : 7; 6528 6529 #ifdef AHC_TARGET_MODE 6530 /* 6531 * Send an immediate notify ccb to all target more peripheral 6532 * drivers affected by this action. 6533 */ 6534 for (target = 0; target <= max_scsiid; target++) { 6535 struct ahc_tmode_tstate* tstate; 6536 u_int lun; 6537 6538 tstate = ahc->enabled_targets[target]; 6539 if (tstate == NULL) 6540 continue; 6541 for (lun = 0; lun < AHC_NUM_LUNS; lun++) { 6542 struct ahc_tmode_lstate* lstate; 6543 6544 lstate = tstate->enabled_luns[lun]; 6545 if (lstate == NULL) 6546 continue; 6547 6548 ahc_queue_lstate_event(ahc, lstate, CAM_TARGET_WILDCARD, 6549 EVENT_TYPE_BUS_RESET, /*arg*/0); 6550 ahc_send_lstate_events(ahc, lstate); 6551 } 6552 } 6553 #endif 6554 /* Notify the XPT that a bus reset occurred */ 6555 ahc_send_async(ahc, devinfo.channel, CAM_TARGET_WILDCARD, 6556 CAM_LUN_WILDCARD, AC_BUS_RESET); 6557 6558 /* 6559 * Revert to async/narrow transfers until we renegotiate. 6560 */ 6561 for (target = 0; target <= max_scsiid; target++) { 6562 6563 if (ahc->enabled_targets[target] == NULL) 6564 continue; 6565 for (initiator = 0; initiator <= max_scsiid; initiator++) { 6566 struct ahc_devinfo devinfo; 6567 6568 ahc_compile_devinfo(&devinfo, target, initiator, 6569 CAM_LUN_WILDCARD, 6570 channel, ROLE_UNKNOWN); 6571 ahc_set_width(ahc, &devinfo, MSG_EXT_WDTR_BUS_8_BIT, 6572 AHC_TRANS_CUR, /*paused*/TRUE); 6573 ahc_set_syncrate(ahc, &devinfo, /*syncrate*/NULL, 6574 /*period*/0, /*offset*/0, 6575 /*ppr_options*/0, AHC_TRANS_CUR, 6576 /*paused*/TRUE); 6577 } 6578 } 6579 6580 if (restart_needed) 6581 ahc_restart(ahc); 6582 else 6583 ahc_unpause(ahc); 6584 return found; 6585 } 6586 6587 6588 /***************************** Residual Processing ****************************/ 6589 /* 6590 * Calculate the residual for a just completed SCB. 6591 */ 6592 static void 6593 ahc_calc_residual(struct ahc_softc *ahc, struct scb *scb) 6594 { 6595 struct hardware_scb *hscb; 6596 struct status_pkt *spkt; 6597 uint32_t sgptr; 6598 uint32_t resid_sgptr; 6599 uint32_t resid; 6600 6601 /* 6602 * 5 cases. 6603 * 1) No residual. 6604 * SG_RESID_VALID clear in sgptr. 6605 * 2) Transferless command 6606 * 3) Never performed any transfers. 6607 * sgptr has SG_FULL_RESID set. 6608 * 4) No residual but target did not 6609 * save data pointers after the 6610 * last transfer, so sgptr was 6611 * never updated. 6612 * 5) We have a partial residual. 6613 * Use residual_sgptr to determine 6614 * where we are. 6615 */ 6616 6617 hscb = scb->hscb; 6618 sgptr = ahc_le32toh(hscb->sgptr); 6619 if ((sgptr & SG_RESID_VALID) == 0) 6620 /* Case 1 */ 6621 return; 6622 sgptr &= ~SG_RESID_VALID; 6623 6624 if ((sgptr & SG_LIST_NULL) != 0) 6625 /* Case 2 */ 6626 return; 6627 6628 spkt = &hscb->shared_data.status; 6629 resid_sgptr = ahc_le32toh(spkt->residual_sg_ptr); 6630 if ((sgptr & SG_FULL_RESID) != 0) { 6631 /* Case 3 */ 6632 resid = ahc_get_transfer_length(scb); 6633 } else if ((resid_sgptr & SG_LIST_NULL) != 0) { 6634 /* Case 4 */ 6635 return; 6636 } else if ((resid_sgptr & ~SG_PTR_MASK) != 0) { 6637 panic("Bogus resid sgptr value 0x%x\n", resid_sgptr); 6638 } else { 6639 struct ahc_dma_seg *sg; 6640 6641 /* 6642 * Remainder of the SG where the transfer 6643 * stopped. 6644 */ 6645 resid = ahc_le32toh(spkt->residual_datacnt) & AHC_SG_LEN_MASK; 6646 sg = ahc_sg_bus_to_virt(scb, resid_sgptr & SG_PTR_MASK); 6647 6648 /* The residual sg_ptr always points to the next sg */ 6649 sg--; 6650 6651 /* 6652 * Add up the contents of all residual 6653 * SG segments that are after the SG where 6654 * the transfer stopped. 6655 */ 6656 while ((ahc_le32toh(sg->len) & AHC_DMA_LAST_SEG) == 0) { 6657 sg++; 6658 resid += ahc_le32toh(sg->len) & AHC_SG_LEN_MASK; 6659 } 6660 } 6661 if ((scb->flags & SCB_SENSE) == 0) 6662 ahc_set_residual(scb, resid); 6663 else 6664 ahc_set_sense_residual(scb, resid); 6665 6666 #ifdef AHC_DEBUG 6667 if ((ahc_debug & AHC_SHOW_MISC) != 0) { 6668 ahc_print_path(ahc, scb); 6669 printk("Handled %sResidual of %d bytes\n", 6670 (scb->flags & SCB_SENSE) ? "Sense " : "", resid); 6671 } 6672 #endif 6673 } 6674 6675 /******************************* Target Mode **********************************/ 6676 #ifdef AHC_TARGET_MODE 6677 /* 6678 * Add a target mode event to this lun's queue 6679 */ 6680 static void 6681 ahc_queue_lstate_event(struct ahc_softc *ahc, struct ahc_tmode_lstate *lstate, 6682 u_int initiator_id, u_int event_type, u_int event_arg) 6683 { 6684 struct ahc_tmode_event *event; 6685 int pending; 6686 6687 xpt_freeze_devq(lstate->path, /*count*/1); 6688 if (lstate->event_w_idx >= lstate->event_r_idx) 6689 pending = lstate->event_w_idx - lstate->event_r_idx; 6690 else 6691 pending = AHC_TMODE_EVENT_BUFFER_SIZE + 1 6692 - (lstate->event_r_idx - lstate->event_w_idx); 6693 6694 if (event_type == EVENT_TYPE_BUS_RESET 6695 || event_type == MSG_BUS_DEV_RESET) { 6696 /* 6697 * Any earlier events are irrelevant, so reset our buffer. 6698 * This has the effect of allowing us to deal with reset 6699 * floods (an external device holding down the reset line) 6700 * without losing the event that is really interesting. 6701 */ 6702 lstate->event_r_idx = 0; 6703 lstate->event_w_idx = 0; 6704 xpt_release_devq(lstate->path, pending, /*runqueue*/FALSE); 6705 } 6706 6707 if (pending == AHC_TMODE_EVENT_BUFFER_SIZE) { 6708 xpt_print_path(lstate->path); 6709 printk("immediate event %x:%x lost\n", 6710 lstate->event_buffer[lstate->event_r_idx].event_type, 6711 lstate->event_buffer[lstate->event_r_idx].event_arg); 6712 lstate->event_r_idx++; 6713 if (lstate->event_r_idx == AHC_TMODE_EVENT_BUFFER_SIZE) 6714 lstate->event_r_idx = 0; 6715 xpt_release_devq(lstate->path, /*count*/1, /*runqueue*/FALSE); 6716 } 6717 6718 event = &lstate->event_buffer[lstate->event_w_idx]; 6719 event->initiator_id = initiator_id; 6720 event->event_type = event_type; 6721 event->event_arg = event_arg; 6722 lstate->event_w_idx++; 6723 if (lstate->event_w_idx == AHC_TMODE_EVENT_BUFFER_SIZE) 6724 lstate->event_w_idx = 0; 6725 } 6726 6727 /* 6728 * Send any target mode events queued up waiting 6729 * for immediate notify resources. 6730 */ 6731 void 6732 ahc_send_lstate_events(struct ahc_softc *ahc, struct ahc_tmode_lstate *lstate) 6733 { 6734 struct ccb_hdr *ccbh; 6735 struct ccb_immed_notify *inot; 6736 6737 while (lstate->event_r_idx != lstate->event_w_idx 6738 && (ccbh = SLIST_FIRST(&lstate->immed_notifies)) != NULL) { 6739 struct ahc_tmode_event *event; 6740 6741 event = &lstate->event_buffer[lstate->event_r_idx]; 6742 SLIST_REMOVE_HEAD(&lstate->immed_notifies, sim_links.sle); 6743 inot = (struct ccb_immed_notify *)ccbh; 6744 switch (event->event_type) { 6745 case EVENT_TYPE_BUS_RESET: 6746 ccbh->status = CAM_SCSI_BUS_RESET|CAM_DEV_QFRZN; 6747 break; 6748 default: 6749 ccbh->status = CAM_MESSAGE_RECV|CAM_DEV_QFRZN; 6750 inot->message_args[0] = event->event_type; 6751 inot->message_args[1] = event->event_arg; 6752 break; 6753 } 6754 inot->initiator_id = event->initiator_id; 6755 inot->sense_len = 0; 6756 xpt_done((union ccb *)inot); 6757 lstate->event_r_idx++; 6758 if (lstate->event_r_idx == AHC_TMODE_EVENT_BUFFER_SIZE) 6759 lstate->event_r_idx = 0; 6760 } 6761 } 6762 #endif 6763 6764 /******************** Sequencer Program Patching/Download *********************/ 6765 6766 #ifdef AHC_DUMP_SEQ 6767 void 6768 ahc_dumpseq(struct ahc_softc* ahc) 6769 { 6770 int i; 6771 6772 ahc_outb(ahc, SEQCTL, PERRORDIS|FAILDIS|FASTMODE|LOADRAM); 6773 ahc_outb(ahc, SEQADDR0, 0); 6774 ahc_outb(ahc, SEQADDR1, 0); 6775 for (i = 0; i < ahc->instruction_ram_size; i++) { 6776 uint8_t ins_bytes[4]; 6777 6778 ahc_insb(ahc, SEQRAM, ins_bytes, 4); 6779 printk("0x%08x\n", ins_bytes[0] << 24 6780 | ins_bytes[1] << 16 6781 | ins_bytes[2] << 8 6782 | ins_bytes[3]); 6783 } 6784 } 6785 #endif 6786 6787 static int 6788 ahc_loadseq(struct ahc_softc *ahc) 6789 { 6790 struct cs cs_table[NUM_CRITICAL_SECTIONS]; 6791 u_int begin_set[NUM_CRITICAL_SECTIONS]; 6792 u_int end_set[NUM_CRITICAL_SECTIONS]; 6793 const struct patch *cur_patch; 6794 u_int cs_count; 6795 u_int cur_cs; 6796 u_int i; 6797 u_int skip_addr; 6798 u_int sg_prefetch_cnt; 6799 int downloaded; 6800 uint8_t download_consts[7]; 6801 6802 /* 6803 * Start out with 0 critical sections 6804 * that apply to this firmware load. 6805 */ 6806 cs_count = 0; 6807 cur_cs = 0; 6808 memset(begin_set, 0, sizeof(begin_set)); 6809 memset(end_set, 0, sizeof(end_set)); 6810 6811 /* Setup downloadable constant table */ 6812 download_consts[QOUTFIFO_OFFSET] = 0; 6813 if (ahc->targetcmds != NULL) 6814 download_consts[QOUTFIFO_OFFSET] += 32; 6815 download_consts[QINFIFO_OFFSET] = download_consts[QOUTFIFO_OFFSET] + 1; 6816 download_consts[CACHESIZE_MASK] = ahc->pci_cachesize - 1; 6817 download_consts[INVERTED_CACHESIZE_MASK] = ~(ahc->pci_cachesize - 1); 6818 sg_prefetch_cnt = ahc->pci_cachesize; 6819 if (sg_prefetch_cnt < (2 * sizeof(struct ahc_dma_seg))) 6820 sg_prefetch_cnt = 2 * sizeof(struct ahc_dma_seg); 6821 download_consts[SG_PREFETCH_CNT] = sg_prefetch_cnt; 6822 download_consts[SG_PREFETCH_ALIGN_MASK] = ~(sg_prefetch_cnt - 1); 6823 download_consts[SG_PREFETCH_ADDR_MASK] = (sg_prefetch_cnt - 1); 6824 6825 cur_patch = patches; 6826 downloaded = 0; 6827 skip_addr = 0; 6828 ahc_outb(ahc, SEQCTL, PERRORDIS|FAILDIS|FASTMODE|LOADRAM); 6829 ahc_outb(ahc, SEQADDR0, 0); 6830 ahc_outb(ahc, SEQADDR1, 0); 6831 6832 for (i = 0; i < sizeof(seqprog)/4; i++) { 6833 if (ahc_check_patch(ahc, &cur_patch, i, &skip_addr) == 0) { 6834 /* 6835 * Don't download this instruction as it 6836 * is in a patch that was removed. 6837 */ 6838 continue; 6839 } 6840 6841 if (downloaded == ahc->instruction_ram_size) { 6842 /* 6843 * We're about to exceed the instruction 6844 * storage capacity for this chip. Fail 6845 * the load. 6846 */ 6847 printk("\n%s: Program too large for instruction memory " 6848 "size of %d!\n", ahc_name(ahc), 6849 ahc->instruction_ram_size); 6850 return (ENOMEM); 6851 } 6852 6853 /* 6854 * Move through the CS table until we find a CS 6855 * that might apply to this instruction. 6856 */ 6857 for (; cur_cs < NUM_CRITICAL_SECTIONS; cur_cs++) { 6858 if (critical_sections[cur_cs].end <= i) { 6859 if (begin_set[cs_count] == TRUE 6860 && end_set[cs_count] == FALSE) { 6861 cs_table[cs_count].end = downloaded; 6862 end_set[cs_count] = TRUE; 6863 cs_count++; 6864 } 6865 continue; 6866 } 6867 if (critical_sections[cur_cs].begin <= i 6868 && begin_set[cs_count] == FALSE) { 6869 cs_table[cs_count].begin = downloaded; 6870 begin_set[cs_count] = TRUE; 6871 } 6872 break; 6873 } 6874 ahc_download_instr(ahc, i, download_consts); 6875 downloaded++; 6876 } 6877 6878 ahc->num_critical_sections = cs_count; 6879 if (cs_count != 0) { 6880 6881 cs_count *= sizeof(struct cs); 6882 ahc->critical_sections = kmemdup(cs_table, cs_count, GFP_ATOMIC); 6883 if (ahc->critical_sections == NULL) 6884 panic("ahc_loadseq: Could not malloc"); 6885 } 6886 ahc_outb(ahc, SEQCTL, PERRORDIS|FAILDIS|FASTMODE); 6887 6888 if (bootverbose) { 6889 printk(" %d instructions downloaded\n", downloaded); 6890 printk("%s: Features 0x%x, Bugs 0x%x, Flags 0x%x\n", 6891 ahc_name(ahc), ahc->features, ahc->bugs, ahc->flags); 6892 } 6893 return (0); 6894 } 6895 6896 static int 6897 ahc_check_patch(struct ahc_softc *ahc, const struct patch **start_patch, 6898 u_int start_instr, u_int *skip_addr) 6899 { 6900 const struct patch *cur_patch; 6901 const struct patch *last_patch; 6902 u_int num_patches; 6903 6904 num_patches = ARRAY_SIZE(patches); 6905 last_patch = &patches[num_patches]; 6906 cur_patch = *start_patch; 6907 6908 while (cur_patch < last_patch && start_instr == cur_patch->begin) { 6909 6910 if (cur_patch->patch_func(ahc) == 0) { 6911 6912 /* Start rejecting code */ 6913 *skip_addr = start_instr + cur_patch->skip_instr; 6914 cur_patch += cur_patch->skip_patch; 6915 } else { 6916 /* Accepted this patch. Advance to the next 6917 * one and wait for our intruction pointer to 6918 * hit this point. 6919 */ 6920 cur_patch++; 6921 } 6922 } 6923 6924 *start_patch = cur_patch; 6925 if (start_instr < *skip_addr) 6926 /* Still skipping */ 6927 return (0); 6928 6929 return (1); 6930 } 6931 6932 static void 6933 ahc_download_instr(struct ahc_softc *ahc, u_int instrptr, uint8_t *dconsts) 6934 { 6935 union ins_formats instr; 6936 struct ins_format1 *fmt1_ins; 6937 struct ins_format3 *fmt3_ins; 6938 u_int opcode; 6939 6940 /* 6941 * The firmware is always compiled into a little endian format. 6942 */ 6943 instr.integer = ahc_le32toh(*(uint32_t*)&seqprog[instrptr * 4]); 6944 6945 fmt1_ins = &instr.format1; 6946 fmt3_ins = NULL; 6947 6948 /* Pull the opcode */ 6949 opcode = instr.format1.opcode; 6950 switch (opcode) { 6951 case AIC_OP_JMP: 6952 case AIC_OP_JC: 6953 case AIC_OP_JNC: 6954 case AIC_OP_CALL: 6955 case AIC_OP_JNE: 6956 case AIC_OP_JNZ: 6957 case AIC_OP_JE: 6958 case AIC_OP_JZ: 6959 { 6960 const struct patch *cur_patch; 6961 int address_offset; 6962 u_int address; 6963 u_int skip_addr; 6964 u_int i; 6965 6966 fmt3_ins = &instr.format3; 6967 address_offset = 0; 6968 address = fmt3_ins->address; 6969 cur_patch = patches; 6970 skip_addr = 0; 6971 6972 for (i = 0; i < address;) { 6973 6974 ahc_check_patch(ahc, &cur_patch, i, &skip_addr); 6975 6976 if (skip_addr > i) { 6977 int end_addr; 6978 6979 end_addr = min(address, skip_addr); 6980 address_offset += end_addr - i; 6981 i = skip_addr; 6982 } else { 6983 i++; 6984 } 6985 } 6986 address -= address_offset; 6987 fmt3_ins->address = address; 6988 } 6989 fallthrough; 6990 case AIC_OP_OR: 6991 case AIC_OP_AND: 6992 case AIC_OP_XOR: 6993 case AIC_OP_ADD: 6994 case AIC_OP_ADC: 6995 case AIC_OP_BMOV: 6996 if (fmt1_ins->parity != 0) { 6997 fmt1_ins->immediate = dconsts[fmt1_ins->immediate]; 6998 } 6999 fmt1_ins->parity = 0; 7000 if ((ahc->features & AHC_CMD_CHAN) == 0 7001 && opcode == AIC_OP_BMOV) { 7002 /* 7003 * Block move was added at the same time 7004 * as the command channel. Verify that 7005 * this is only a move of a single element 7006 * and convert the BMOV to a MOV 7007 * (AND with an immediate of FF). 7008 */ 7009 if (fmt1_ins->immediate != 1) 7010 panic("%s: BMOV not supported\n", 7011 ahc_name(ahc)); 7012 fmt1_ins->opcode = AIC_OP_AND; 7013 fmt1_ins->immediate = 0xff; 7014 } 7015 fallthrough; 7016 case AIC_OP_ROL: 7017 if ((ahc->features & AHC_ULTRA2) != 0) { 7018 int i, count; 7019 7020 /* Calculate odd parity for the instruction */ 7021 for (i = 0, count = 0; i < 31; i++) { 7022 uint32_t mask; 7023 7024 mask = 0x01 << i; 7025 if ((instr.integer & mask) != 0) 7026 count++; 7027 } 7028 if ((count & 0x01) == 0) 7029 instr.format1.parity = 1; 7030 } else { 7031 /* Compress the instruction for older sequencers */ 7032 if (fmt3_ins != NULL) { 7033 instr.integer = 7034 fmt3_ins->immediate 7035 | (fmt3_ins->source << 8) 7036 | (fmt3_ins->address << 16) 7037 | (fmt3_ins->opcode << 25); 7038 } else { 7039 instr.integer = 7040 fmt1_ins->immediate 7041 | (fmt1_ins->source << 8) 7042 | (fmt1_ins->destination << 16) 7043 | (fmt1_ins->ret << 24) 7044 | (fmt1_ins->opcode << 25); 7045 } 7046 } 7047 /* The sequencer is a little endian cpu */ 7048 instr.integer = ahc_htole32(instr.integer); 7049 ahc_outsb(ahc, SEQRAM, instr.bytes, 4); 7050 break; 7051 default: 7052 panic("Unknown opcode encountered in seq program"); 7053 break; 7054 } 7055 } 7056 7057 int 7058 ahc_print_register(const ahc_reg_parse_entry_t *table, u_int num_entries, 7059 const char *name, u_int address, u_int value, 7060 u_int *cur_column, u_int wrap_point) 7061 { 7062 int printed; 7063 u_int printed_mask; 7064 7065 if (cur_column != NULL && *cur_column >= wrap_point) { 7066 printk("\n"); 7067 *cur_column = 0; 7068 } 7069 printed = printk("%s[0x%x]", name, value); 7070 if (table == NULL) { 7071 printed += printk(" "); 7072 *cur_column += printed; 7073 return (printed); 7074 } 7075 printed_mask = 0; 7076 while (printed_mask != 0xFF) { 7077 int entry; 7078 7079 for (entry = 0; entry < num_entries; entry++) { 7080 if (((value & table[entry].mask) 7081 != table[entry].value) 7082 || ((printed_mask & table[entry].mask) 7083 == table[entry].mask)) 7084 continue; 7085 7086 printed += printk("%s%s", 7087 printed_mask == 0 ? ":(" : "|", 7088 table[entry].name); 7089 printed_mask |= table[entry].mask; 7090 7091 break; 7092 } 7093 if (entry >= num_entries) 7094 break; 7095 } 7096 if (printed_mask != 0) 7097 printed += printk(") "); 7098 else 7099 printed += printk(" "); 7100 if (cur_column != NULL) 7101 *cur_column += printed; 7102 return (printed); 7103 } 7104 7105 void 7106 ahc_dump_card_state(struct ahc_softc *ahc) 7107 { 7108 struct scb *scb; 7109 struct scb_tailq *untagged_q; 7110 u_int cur_col; 7111 int paused; 7112 int target; 7113 int maxtarget; 7114 int i; 7115 uint8_t last_phase; 7116 uint8_t qinpos; 7117 uint8_t qintail; 7118 uint8_t qoutpos; 7119 uint8_t scb_index; 7120 uint8_t saved_scbptr; 7121 7122 if (ahc_is_paused(ahc)) { 7123 paused = 1; 7124 } else { 7125 paused = 0; 7126 ahc_pause(ahc); 7127 } 7128 7129 saved_scbptr = ahc_inb(ahc, SCBPTR); 7130 last_phase = ahc_inb(ahc, LASTPHASE); 7131 printk(">>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<\n" 7132 "%s: Dumping Card State %s, at SEQADDR 0x%x\n", 7133 ahc_name(ahc), ahc_lookup_phase_entry(last_phase)->phasemsg, 7134 ahc_inb(ahc, SEQADDR0) | (ahc_inb(ahc, SEQADDR1) << 8)); 7135 if (paused) 7136 printk("Card was paused\n"); 7137 printk("ACCUM = 0x%x, SINDEX = 0x%x, DINDEX = 0x%x, ARG_2 = 0x%x\n", 7138 ahc_inb(ahc, ACCUM), ahc_inb(ahc, SINDEX), ahc_inb(ahc, DINDEX), 7139 ahc_inb(ahc, ARG_2)); 7140 printk("HCNT = 0x%x SCBPTR = 0x%x\n", ahc_inb(ahc, HCNT), 7141 ahc_inb(ahc, SCBPTR)); 7142 cur_col = 0; 7143 if ((ahc->features & AHC_DT) != 0) 7144 ahc_scsiphase_print(ahc_inb(ahc, SCSIPHASE), &cur_col, 50); 7145 ahc_scsisigi_print(ahc_inb(ahc, SCSISIGI), &cur_col, 50); 7146 ahc_error_print(ahc_inb(ahc, ERROR), &cur_col, 50); 7147 ahc_scsibusl_print(ahc_inb(ahc, SCSIBUSL), &cur_col, 50); 7148 ahc_lastphase_print(ahc_inb(ahc, LASTPHASE), &cur_col, 50); 7149 ahc_scsiseq_print(ahc_inb(ahc, SCSISEQ), &cur_col, 50); 7150 ahc_sblkctl_print(ahc_inb(ahc, SBLKCTL), &cur_col, 50); 7151 ahc_scsirate_print(ahc_inb(ahc, SCSIRATE), &cur_col, 50); 7152 ahc_seqctl_print(ahc_inb(ahc, SEQCTL), &cur_col, 50); 7153 ahc_seq_flags_print(ahc_inb(ahc, SEQ_FLAGS), &cur_col, 50); 7154 ahc_sstat0_print(ahc_inb(ahc, SSTAT0), &cur_col, 50); 7155 ahc_sstat1_print(ahc_inb(ahc, SSTAT1), &cur_col, 50); 7156 ahc_sstat2_print(ahc_inb(ahc, SSTAT2), &cur_col, 50); 7157 ahc_sstat3_print(ahc_inb(ahc, SSTAT3), &cur_col, 50); 7158 ahc_simode0_print(ahc_inb(ahc, SIMODE0), &cur_col, 50); 7159 ahc_simode1_print(ahc_inb(ahc, SIMODE1), &cur_col, 50); 7160 ahc_sxfrctl0_print(ahc_inb(ahc, SXFRCTL0), &cur_col, 50); 7161 ahc_dfcntrl_print(ahc_inb(ahc, DFCNTRL), &cur_col, 50); 7162 ahc_dfstatus_print(ahc_inb(ahc, DFSTATUS), &cur_col, 50); 7163 if (cur_col != 0) 7164 printk("\n"); 7165 printk("STACK:"); 7166 for (i = 0; i < STACK_SIZE; i++) 7167 printk(" 0x%x", ahc_inb(ahc, STACK)|(ahc_inb(ahc, STACK) << 8)); 7168 printk("\nSCB count = %d\n", ahc->scb_data->numscbs); 7169 printk("Kernel NEXTQSCB = %d\n", ahc->next_queued_scb->hscb->tag); 7170 printk("Card NEXTQSCB = %d\n", ahc_inb(ahc, NEXT_QUEUED_SCB)); 7171 /* QINFIFO */ 7172 printk("QINFIFO entries: "); 7173 if ((ahc->features & AHC_QUEUE_REGS) != 0) { 7174 qinpos = ahc_inb(ahc, SNSCB_QOFF); 7175 ahc_outb(ahc, SNSCB_QOFF, qinpos); 7176 } else 7177 qinpos = ahc_inb(ahc, QINPOS); 7178 qintail = ahc->qinfifonext; 7179 while (qinpos != qintail) { 7180 printk("%d ", ahc->qinfifo[qinpos]); 7181 qinpos++; 7182 } 7183 printk("\n"); 7184 7185 printk("Waiting Queue entries: "); 7186 scb_index = ahc_inb(ahc, WAITING_SCBH); 7187 i = 0; 7188 while (scb_index != SCB_LIST_NULL && i++ < 256) { 7189 ahc_outb(ahc, SCBPTR, scb_index); 7190 printk("%d:%d ", scb_index, ahc_inb(ahc, SCB_TAG)); 7191 scb_index = ahc_inb(ahc, SCB_NEXT); 7192 } 7193 printk("\n"); 7194 7195 printk("Disconnected Queue entries: "); 7196 scb_index = ahc_inb(ahc, DISCONNECTED_SCBH); 7197 i = 0; 7198 while (scb_index != SCB_LIST_NULL && i++ < 256) { 7199 ahc_outb(ahc, SCBPTR, scb_index); 7200 printk("%d:%d ", scb_index, ahc_inb(ahc, SCB_TAG)); 7201 scb_index = ahc_inb(ahc, SCB_NEXT); 7202 } 7203 printk("\n"); 7204 7205 ahc_sync_qoutfifo(ahc, BUS_DMASYNC_POSTREAD); 7206 printk("QOUTFIFO entries: "); 7207 qoutpos = ahc->qoutfifonext; 7208 i = 0; 7209 while (ahc->qoutfifo[qoutpos] != SCB_LIST_NULL && i++ < 256) { 7210 printk("%d ", ahc->qoutfifo[qoutpos]); 7211 qoutpos++; 7212 } 7213 printk("\n"); 7214 7215 printk("Sequencer Free SCB List: "); 7216 scb_index = ahc_inb(ahc, FREE_SCBH); 7217 i = 0; 7218 while (scb_index != SCB_LIST_NULL && i++ < 256) { 7219 ahc_outb(ahc, SCBPTR, scb_index); 7220 printk("%d ", scb_index); 7221 scb_index = ahc_inb(ahc, SCB_NEXT); 7222 } 7223 printk("\n"); 7224 7225 printk("Sequencer SCB Info: "); 7226 for (i = 0; i < ahc->scb_data->maxhscbs; i++) { 7227 ahc_outb(ahc, SCBPTR, i); 7228 cur_col = printk("\n%3d ", i); 7229 7230 ahc_scb_control_print(ahc_inb(ahc, SCB_CONTROL), &cur_col, 60); 7231 ahc_scb_scsiid_print(ahc_inb(ahc, SCB_SCSIID), &cur_col, 60); 7232 ahc_scb_lun_print(ahc_inb(ahc, SCB_LUN), &cur_col, 60); 7233 ahc_scb_tag_print(ahc_inb(ahc, SCB_TAG), &cur_col, 60); 7234 } 7235 printk("\n"); 7236 7237 printk("Pending list: "); 7238 i = 0; 7239 LIST_FOREACH(scb, &ahc->pending_scbs, pending_links) { 7240 if (i++ > 256) 7241 break; 7242 cur_col = printk("\n%3d ", scb->hscb->tag); 7243 ahc_scb_control_print(scb->hscb->control, &cur_col, 60); 7244 ahc_scb_scsiid_print(scb->hscb->scsiid, &cur_col, 60); 7245 ahc_scb_lun_print(scb->hscb->lun, &cur_col, 60); 7246 if ((ahc->flags & AHC_PAGESCBS) == 0) { 7247 ahc_outb(ahc, SCBPTR, scb->hscb->tag); 7248 printk("("); 7249 ahc_scb_control_print(ahc_inb(ahc, SCB_CONTROL), 7250 &cur_col, 60); 7251 ahc_scb_tag_print(ahc_inb(ahc, SCB_TAG), &cur_col, 60); 7252 printk(")"); 7253 } 7254 } 7255 printk("\n"); 7256 7257 printk("Kernel Free SCB list: "); 7258 i = 0; 7259 SLIST_FOREACH(scb, &ahc->scb_data->free_scbs, links.sle) { 7260 if (i++ > 256) 7261 break; 7262 printk("%d ", scb->hscb->tag); 7263 } 7264 printk("\n"); 7265 7266 maxtarget = (ahc->features & (AHC_WIDE|AHC_TWIN)) ? 15 : 7; 7267 for (target = 0; target <= maxtarget; target++) { 7268 untagged_q = &ahc->untagged_queues[target]; 7269 if (TAILQ_FIRST(untagged_q) == NULL) 7270 continue; 7271 printk("Untagged Q(%d): ", target); 7272 i = 0; 7273 TAILQ_FOREACH(scb, untagged_q, links.tqe) { 7274 if (i++ > 256) 7275 break; 7276 printk("%d ", scb->hscb->tag); 7277 } 7278 printk("\n"); 7279 } 7280 7281 printk("\n<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>\n"); 7282 ahc_outb(ahc, SCBPTR, saved_scbptr); 7283 if (paused == 0) 7284 ahc_unpause(ahc); 7285 } 7286 7287 /************************* Target Mode ****************************************/ 7288 #ifdef AHC_TARGET_MODE 7289 cam_status 7290 ahc_find_tmode_devs(struct ahc_softc *ahc, struct cam_sim *sim, union ccb *ccb, 7291 struct ahc_tmode_tstate **tstate, 7292 struct ahc_tmode_lstate **lstate, 7293 int notfound_failure) 7294 { 7295 7296 if ((ahc->features & AHC_TARGETMODE) == 0) 7297 return (CAM_REQ_INVALID); 7298 7299 /* 7300 * Handle the 'black hole' device that sucks up 7301 * requests to unattached luns on enabled targets. 7302 */ 7303 if (ccb->ccb_h.target_id == CAM_TARGET_WILDCARD 7304 && ccb->ccb_h.target_lun == CAM_LUN_WILDCARD) { 7305 *tstate = NULL; 7306 *lstate = ahc->black_hole; 7307 } else { 7308 u_int max_id; 7309 7310 max_id = (ahc->features & AHC_WIDE) ? 16 : 8; 7311 if (ccb->ccb_h.target_id >= max_id) 7312 return (CAM_TID_INVALID); 7313 7314 if (ccb->ccb_h.target_lun >= AHC_NUM_LUNS) 7315 return (CAM_LUN_INVALID); 7316 7317 *tstate = ahc->enabled_targets[ccb->ccb_h.target_id]; 7318 *lstate = NULL; 7319 if (*tstate != NULL) 7320 *lstate = 7321 (*tstate)->enabled_luns[ccb->ccb_h.target_lun]; 7322 } 7323 7324 if (notfound_failure != 0 && *lstate == NULL) 7325 return (CAM_PATH_INVALID); 7326 7327 return (CAM_REQ_CMP); 7328 } 7329 7330 void 7331 ahc_handle_en_lun(struct ahc_softc *ahc, struct cam_sim *sim, union ccb *ccb) 7332 { 7333 struct ahc_tmode_tstate *tstate; 7334 struct ahc_tmode_lstate *lstate; 7335 struct ccb_en_lun *cel; 7336 cam_status status; 7337 u_long s; 7338 u_int target; 7339 u_int lun; 7340 u_int target_mask; 7341 u_int our_id; 7342 int error; 7343 char channel; 7344 7345 status = ahc_find_tmode_devs(ahc, sim, ccb, &tstate, &lstate, 7346 /*notfound_failure*/FALSE); 7347 7348 if (status != CAM_REQ_CMP) { 7349 ccb->ccb_h.status = status; 7350 return; 7351 } 7352 7353 if (cam_sim_bus(sim) == 0) 7354 our_id = ahc->our_id; 7355 else 7356 our_id = ahc->our_id_b; 7357 7358 if (ccb->ccb_h.target_id != our_id) { 7359 /* 7360 * our_id represents our initiator ID, or 7361 * the ID of the first target to have an 7362 * enabled lun in target mode. There are 7363 * two cases that may preclude enabling a 7364 * target id other than our_id. 7365 * 7366 * o our_id is for an active initiator role. 7367 * Since the hardware does not support 7368 * reselections to the initiator role at 7369 * anything other than our_id, and our_id 7370 * is used by the hardware to indicate the 7371 * ID to use for both select-out and 7372 * reselect-out operations, the only target 7373 * ID we can support in this mode is our_id. 7374 * 7375 * o The MULTARGID feature is not available and 7376 * a previous target mode ID has been enabled. 7377 */ 7378 if ((ahc->features & AHC_MULTIROLE) != 0) { 7379 7380 if ((ahc->features & AHC_MULTI_TID) != 0 7381 && (ahc->flags & AHC_INITIATORROLE) != 0) { 7382 /* 7383 * Only allow additional targets if 7384 * the initiator role is disabled. 7385 * The hardware cannot handle a re-select-in 7386 * on the initiator id during a re-select-out 7387 * on a different target id. 7388 */ 7389 status = CAM_TID_INVALID; 7390 } else if ((ahc->flags & AHC_INITIATORROLE) != 0 7391 || ahc->enabled_luns > 0) { 7392 /* 7393 * Only allow our target id to change 7394 * if the initiator role is not configured 7395 * and there are no enabled luns which 7396 * are attached to the currently registered 7397 * scsi id. 7398 */ 7399 status = CAM_TID_INVALID; 7400 } 7401 } else if ((ahc->features & AHC_MULTI_TID) == 0 7402 && ahc->enabled_luns > 0) { 7403 7404 status = CAM_TID_INVALID; 7405 } 7406 } 7407 7408 if (status != CAM_REQ_CMP) { 7409 ccb->ccb_h.status = status; 7410 return; 7411 } 7412 7413 /* 7414 * We now have an id that is valid. 7415 * If we aren't in target mode, switch modes. 7416 */ 7417 if ((ahc->flags & AHC_TARGETROLE) == 0 7418 && ccb->ccb_h.target_id != CAM_TARGET_WILDCARD) { 7419 u_long s; 7420 ahc_flag saved_flags; 7421 7422 printk("Configuring Target Mode\n"); 7423 ahc_lock(ahc, &s); 7424 if (LIST_FIRST(&ahc->pending_scbs) != NULL) { 7425 ccb->ccb_h.status = CAM_BUSY; 7426 ahc_unlock(ahc, &s); 7427 return; 7428 } 7429 saved_flags = ahc->flags; 7430 ahc->flags |= AHC_TARGETROLE; 7431 if ((ahc->features & AHC_MULTIROLE) == 0) 7432 ahc->flags &= ~AHC_INITIATORROLE; 7433 ahc_pause(ahc); 7434 error = ahc_loadseq(ahc); 7435 if (error != 0) { 7436 /* 7437 * Restore original configuration and notify 7438 * the caller that we cannot support target mode. 7439 * Since the adapter started out in this 7440 * configuration, the firmware load will succeed, 7441 * so there is no point in checking ahc_loadseq's 7442 * return value. 7443 */ 7444 ahc->flags = saved_flags; 7445 (void)ahc_loadseq(ahc); 7446 ahc_restart(ahc); 7447 ahc_unlock(ahc, &s); 7448 ccb->ccb_h.status = CAM_FUNC_NOTAVAIL; 7449 return; 7450 } 7451 ahc_restart(ahc); 7452 ahc_unlock(ahc, &s); 7453 } 7454 cel = &ccb->cel; 7455 target = ccb->ccb_h.target_id; 7456 lun = ccb->ccb_h.target_lun; 7457 channel = SIM_CHANNEL(ahc, sim); 7458 target_mask = 0x01 << target; 7459 if (channel == 'B') 7460 target_mask <<= 8; 7461 7462 if (cel->enable != 0) { 7463 u_int scsiseq; 7464 7465 /* Are we already enabled?? */ 7466 if (lstate != NULL) { 7467 xpt_print_path(ccb->ccb_h.path); 7468 printk("Lun already enabled\n"); 7469 ccb->ccb_h.status = CAM_LUN_ALRDY_ENA; 7470 return; 7471 } 7472 7473 if (cel->grp6_len != 0 7474 || cel->grp7_len != 0) { 7475 /* 7476 * Don't (yet?) support vendor 7477 * specific commands. 7478 */ 7479 ccb->ccb_h.status = CAM_REQ_INVALID; 7480 printk("Non-zero Group Codes\n"); 7481 return; 7482 } 7483 7484 /* 7485 * Seems to be okay. 7486 * Setup our data structures. 7487 */ 7488 if (target != CAM_TARGET_WILDCARD && tstate == NULL) { 7489 tstate = ahc_alloc_tstate(ahc, target, channel); 7490 if (tstate == NULL) { 7491 xpt_print_path(ccb->ccb_h.path); 7492 printk("Couldn't allocate tstate\n"); 7493 ccb->ccb_h.status = CAM_RESRC_UNAVAIL; 7494 return; 7495 } 7496 } 7497 lstate = kzalloc(sizeof(*lstate), GFP_ATOMIC); 7498 if (lstate == NULL) { 7499 xpt_print_path(ccb->ccb_h.path); 7500 printk("Couldn't allocate lstate\n"); 7501 ccb->ccb_h.status = CAM_RESRC_UNAVAIL; 7502 return; 7503 } 7504 status = xpt_create_path(&lstate->path, /*periph*/NULL, 7505 xpt_path_path_id(ccb->ccb_h.path), 7506 xpt_path_target_id(ccb->ccb_h.path), 7507 xpt_path_lun_id(ccb->ccb_h.path)); 7508 if (status != CAM_REQ_CMP) { 7509 kfree(lstate); 7510 xpt_print_path(ccb->ccb_h.path); 7511 printk("Couldn't allocate path\n"); 7512 ccb->ccb_h.status = CAM_RESRC_UNAVAIL; 7513 return; 7514 } 7515 SLIST_INIT(&lstate->accept_tios); 7516 SLIST_INIT(&lstate->immed_notifies); 7517 ahc_lock(ahc, &s); 7518 ahc_pause(ahc); 7519 if (target != CAM_TARGET_WILDCARD) { 7520 tstate->enabled_luns[lun] = lstate; 7521 ahc->enabled_luns++; 7522 7523 if ((ahc->features & AHC_MULTI_TID) != 0) { 7524 u_int targid_mask; 7525 7526 targid_mask = ahc_inb(ahc, TARGID) 7527 | (ahc_inb(ahc, TARGID + 1) << 8); 7528 7529 targid_mask |= target_mask; 7530 ahc_outb(ahc, TARGID, targid_mask); 7531 ahc_outb(ahc, TARGID+1, (targid_mask >> 8)); 7532 7533 ahc_update_scsiid(ahc, targid_mask); 7534 } else { 7535 u_int our_id; 7536 char channel; 7537 7538 channel = SIM_CHANNEL(ahc, sim); 7539 our_id = SIM_SCSI_ID(ahc, sim); 7540 7541 /* 7542 * This can only happen if selections 7543 * are not enabled 7544 */ 7545 if (target != our_id) { 7546 u_int sblkctl; 7547 char cur_channel; 7548 int swap; 7549 7550 sblkctl = ahc_inb(ahc, SBLKCTL); 7551 cur_channel = (sblkctl & SELBUSB) 7552 ? 'B' : 'A'; 7553 if ((ahc->features & AHC_TWIN) == 0) 7554 cur_channel = 'A'; 7555 swap = cur_channel != channel; 7556 if (channel == 'A') 7557 ahc->our_id = target; 7558 else 7559 ahc->our_id_b = target; 7560 7561 if (swap) 7562 ahc_outb(ahc, SBLKCTL, 7563 sblkctl ^ SELBUSB); 7564 7565 ahc_outb(ahc, SCSIID, target); 7566 7567 if (swap) 7568 ahc_outb(ahc, SBLKCTL, sblkctl); 7569 } 7570 } 7571 } else 7572 ahc->black_hole = lstate; 7573 /* Allow select-in operations */ 7574 if (ahc->black_hole != NULL && ahc->enabled_luns > 0) { 7575 scsiseq = ahc_inb(ahc, SCSISEQ_TEMPLATE); 7576 scsiseq |= ENSELI; 7577 ahc_outb(ahc, SCSISEQ_TEMPLATE, scsiseq); 7578 scsiseq = ahc_inb(ahc, SCSISEQ); 7579 scsiseq |= ENSELI; 7580 ahc_outb(ahc, SCSISEQ, scsiseq); 7581 } 7582 ahc_unpause(ahc); 7583 ahc_unlock(ahc, &s); 7584 ccb->ccb_h.status = CAM_REQ_CMP; 7585 xpt_print_path(ccb->ccb_h.path); 7586 printk("Lun now enabled for target mode\n"); 7587 } else { 7588 struct scb *scb; 7589 int i, empty; 7590 7591 if (lstate == NULL) { 7592 ccb->ccb_h.status = CAM_LUN_INVALID; 7593 return; 7594 } 7595 7596 ahc_lock(ahc, &s); 7597 7598 ccb->ccb_h.status = CAM_REQ_CMP; 7599 LIST_FOREACH(scb, &ahc->pending_scbs, pending_links) { 7600 struct ccb_hdr *ccbh; 7601 7602 ccbh = &scb->io_ctx->ccb_h; 7603 if (ccbh->func_code == XPT_CONT_TARGET_IO 7604 && !xpt_path_comp(ccbh->path, ccb->ccb_h.path)){ 7605 printk("CTIO pending\n"); 7606 ccb->ccb_h.status = CAM_REQ_INVALID; 7607 ahc_unlock(ahc, &s); 7608 return; 7609 } 7610 } 7611 7612 if (SLIST_FIRST(&lstate->accept_tios) != NULL) { 7613 printk("ATIOs pending\n"); 7614 ccb->ccb_h.status = CAM_REQ_INVALID; 7615 } 7616 7617 if (SLIST_FIRST(&lstate->immed_notifies) != NULL) { 7618 printk("INOTs pending\n"); 7619 ccb->ccb_h.status = CAM_REQ_INVALID; 7620 } 7621 7622 if (ccb->ccb_h.status != CAM_REQ_CMP) { 7623 ahc_unlock(ahc, &s); 7624 return; 7625 } 7626 7627 xpt_print_path(ccb->ccb_h.path); 7628 printk("Target mode disabled\n"); 7629 xpt_free_path(lstate->path); 7630 kfree(lstate); 7631 7632 ahc_pause(ahc); 7633 /* Can we clean up the target too? */ 7634 if (target != CAM_TARGET_WILDCARD) { 7635 tstate->enabled_luns[lun] = NULL; 7636 ahc->enabled_luns--; 7637 for (empty = 1, i = 0; i < 8; i++) 7638 if (tstate->enabled_luns[i] != NULL) { 7639 empty = 0; 7640 break; 7641 } 7642 7643 if (empty) { 7644 ahc_free_tstate(ahc, target, channel, 7645 /*force*/FALSE); 7646 if (ahc->features & AHC_MULTI_TID) { 7647 u_int targid_mask; 7648 7649 targid_mask = ahc_inb(ahc, TARGID) 7650 | (ahc_inb(ahc, TARGID + 1) 7651 << 8); 7652 7653 targid_mask &= ~target_mask; 7654 ahc_outb(ahc, TARGID, targid_mask); 7655 ahc_outb(ahc, TARGID+1, 7656 (targid_mask >> 8)); 7657 ahc_update_scsiid(ahc, targid_mask); 7658 } 7659 } 7660 } else { 7661 7662 ahc->black_hole = NULL; 7663 7664 /* 7665 * We can't allow selections without 7666 * our black hole device. 7667 */ 7668 empty = TRUE; 7669 } 7670 if (ahc->enabled_luns == 0) { 7671 /* Disallow select-in */ 7672 u_int scsiseq; 7673 7674 scsiseq = ahc_inb(ahc, SCSISEQ_TEMPLATE); 7675 scsiseq &= ~ENSELI; 7676 ahc_outb(ahc, SCSISEQ_TEMPLATE, scsiseq); 7677 scsiseq = ahc_inb(ahc, SCSISEQ); 7678 scsiseq &= ~ENSELI; 7679 ahc_outb(ahc, SCSISEQ, scsiseq); 7680 7681 if ((ahc->features & AHC_MULTIROLE) == 0) { 7682 printk("Configuring Initiator Mode\n"); 7683 ahc->flags &= ~AHC_TARGETROLE; 7684 ahc->flags |= AHC_INITIATORROLE; 7685 /* 7686 * Returning to a configuration that 7687 * fit previously will always succeed. 7688 */ 7689 (void)ahc_loadseq(ahc); 7690 ahc_restart(ahc); 7691 /* 7692 * Unpaused. The extra unpause 7693 * that follows is harmless. 7694 */ 7695 } 7696 } 7697 ahc_unpause(ahc); 7698 ahc_unlock(ahc, &s); 7699 } 7700 } 7701 7702 static void 7703 ahc_update_scsiid(struct ahc_softc *ahc, u_int targid_mask) 7704 { 7705 u_int scsiid_mask; 7706 u_int scsiid; 7707 7708 if ((ahc->features & AHC_MULTI_TID) == 0) 7709 panic("ahc_update_scsiid called on non-multitid unit\n"); 7710 7711 /* 7712 * Since we will rely on the TARGID mask 7713 * for selection enables, ensure that OID 7714 * in SCSIID is not set to some other ID 7715 * that we don't want to allow selections on. 7716 */ 7717 if ((ahc->features & AHC_ULTRA2) != 0) 7718 scsiid = ahc_inb(ahc, SCSIID_ULTRA2); 7719 else 7720 scsiid = ahc_inb(ahc, SCSIID); 7721 scsiid_mask = 0x1 << (scsiid & OID); 7722 if ((targid_mask & scsiid_mask) == 0) { 7723 u_int our_id; 7724 7725 /* ffs counts from 1 */ 7726 our_id = ffs(targid_mask); 7727 if (our_id == 0) 7728 our_id = ahc->our_id; 7729 else 7730 our_id--; 7731 scsiid &= TID; 7732 scsiid |= our_id; 7733 } 7734 if ((ahc->features & AHC_ULTRA2) != 0) 7735 ahc_outb(ahc, SCSIID_ULTRA2, scsiid); 7736 else 7737 ahc_outb(ahc, SCSIID, scsiid); 7738 } 7739 7740 static void 7741 ahc_run_tqinfifo(struct ahc_softc *ahc, int paused) 7742 { 7743 struct target_cmd *cmd; 7744 7745 /* 7746 * If the card supports auto-access pause, 7747 * we can access the card directly regardless 7748 * of whether it is paused or not. 7749 */ 7750 if ((ahc->features & AHC_AUTOPAUSE) != 0) 7751 paused = TRUE; 7752 7753 ahc_sync_tqinfifo(ahc, BUS_DMASYNC_POSTREAD); 7754 while ((cmd = &ahc->targetcmds[ahc->tqinfifonext])->cmd_valid != 0) { 7755 7756 /* 7757 * Only advance through the queue if we 7758 * have the resources to process the command. 7759 */ 7760 if (ahc_handle_target_cmd(ahc, cmd) != 0) 7761 break; 7762 7763 cmd->cmd_valid = 0; 7764 ahc_dmamap_sync(ahc, ahc->shared_data_dmat, 7765 ahc->shared_data_dmamap, 7766 ahc_targetcmd_offset(ahc, ahc->tqinfifonext), 7767 sizeof(struct target_cmd), 7768 BUS_DMASYNC_PREREAD); 7769 ahc->tqinfifonext++; 7770 7771 /* 7772 * Lazily update our position in the target mode incoming 7773 * command queue as seen by the sequencer. 7774 */ 7775 if ((ahc->tqinfifonext & (HOST_TQINPOS - 1)) == 1) { 7776 if ((ahc->features & AHC_HS_MAILBOX) != 0) { 7777 u_int hs_mailbox; 7778 7779 hs_mailbox = ahc_inb(ahc, HS_MAILBOX); 7780 hs_mailbox &= ~HOST_TQINPOS; 7781 hs_mailbox |= ahc->tqinfifonext & HOST_TQINPOS; 7782 ahc_outb(ahc, HS_MAILBOX, hs_mailbox); 7783 } else { 7784 if (!paused) 7785 ahc_pause(ahc); 7786 ahc_outb(ahc, KERNEL_TQINPOS, 7787 ahc->tqinfifonext & HOST_TQINPOS); 7788 if (!paused) 7789 ahc_unpause(ahc); 7790 } 7791 } 7792 } 7793 } 7794 7795 static int 7796 ahc_handle_target_cmd(struct ahc_softc *ahc, struct target_cmd *cmd) 7797 { 7798 struct ahc_tmode_tstate *tstate; 7799 struct ahc_tmode_lstate *lstate; 7800 struct ccb_accept_tio *atio; 7801 uint8_t *byte; 7802 int initiator; 7803 int target; 7804 int lun; 7805 7806 initiator = SCSIID_TARGET(ahc, cmd->scsiid); 7807 target = SCSIID_OUR_ID(cmd->scsiid); 7808 lun = (cmd->identify & MSG_IDENTIFY_LUNMASK); 7809 7810 byte = cmd->bytes; 7811 tstate = ahc->enabled_targets[target]; 7812 lstate = NULL; 7813 if (tstate != NULL) 7814 lstate = tstate->enabled_luns[lun]; 7815 7816 /* 7817 * Commands for disabled luns go to the black hole driver. 7818 */ 7819 if (lstate == NULL) 7820 lstate = ahc->black_hole; 7821 7822 atio = (struct ccb_accept_tio*)SLIST_FIRST(&lstate->accept_tios); 7823 if (atio == NULL) { 7824 ahc->flags |= AHC_TQINFIFO_BLOCKED; 7825 /* 7826 * Wait for more ATIOs from the peripheral driver for this lun. 7827 */ 7828 if (bootverbose) 7829 printk("%s: ATIOs exhausted\n", ahc_name(ahc)); 7830 return (1); 7831 } else 7832 ahc->flags &= ~AHC_TQINFIFO_BLOCKED; 7833 #if 0 7834 printk("Incoming command from %d for %d:%d%s\n", 7835 initiator, target, lun, 7836 lstate == ahc->black_hole ? "(Black Holed)" : ""); 7837 #endif 7838 SLIST_REMOVE_HEAD(&lstate->accept_tios, sim_links.sle); 7839 7840 if (lstate == ahc->black_hole) { 7841 /* Fill in the wildcards */ 7842 atio->ccb_h.target_id = target; 7843 atio->ccb_h.target_lun = lun; 7844 } 7845 7846 /* 7847 * Package it up and send it off to 7848 * whomever has this lun enabled. 7849 */ 7850 atio->sense_len = 0; 7851 atio->init_id = initiator; 7852 if (byte[0] != 0xFF) { 7853 /* Tag was included */ 7854 atio->tag_action = *byte++; 7855 atio->tag_id = *byte++; 7856 atio->ccb_h.flags = CAM_TAG_ACTION_VALID; 7857 } else { 7858 atio->ccb_h.flags = 0; 7859 } 7860 byte++; 7861 7862 /* Okay. Now determine the cdb size based on the command code */ 7863 switch (*byte >> CMD_GROUP_CODE_SHIFT) { 7864 case 0: 7865 atio->cdb_len = 6; 7866 break; 7867 case 1: 7868 case 2: 7869 atio->cdb_len = 10; 7870 break; 7871 case 4: 7872 atio->cdb_len = 16; 7873 break; 7874 case 5: 7875 atio->cdb_len = 12; 7876 break; 7877 case 3: 7878 default: 7879 /* Only copy the opcode. */ 7880 atio->cdb_len = 1; 7881 printk("Reserved or VU command code type encountered\n"); 7882 break; 7883 } 7884 7885 memcpy(atio->cdb_io.cdb_bytes, byte, atio->cdb_len); 7886 7887 atio->ccb_h.status |= CAM_CDB_RECVD; 7888 7889 if ((cmd->identify & MSG_IDENTIFY_DISCFLAG) == 0) { 7890 /* 7891 * We weren't allowed to disconnect. 7892 * We're hanging on the bus until a 7893 * continue target I/O comes in response 7894 * to this accept tio. 7895 */ 7896 #if 0 7897 printk("Received Immediate Command %d:%d:%d - %p\n", 7898 initiator, target, lun, ahc->pending_device); 7899 #endif 7900 ahc->pending_device = lstate; 7901 ahc_freeze_ccb((union ccb *)atio); 7902 atio->ccb_h.flags |= CAM_DIS_DISCONNECT; 7903 } 7904 xpt_done((union ccb*)atio); 7905 return (0); 7906 } 7907 7908 #endif 7909