1 /* 2 * Core definitions and data structures shareable across OS platforms. 3 * 4 * Copyright (c) 1994-2001 Justin T. Gibbs. 5 * Copyright (c) 2000-2001 Adaptec Inc. 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions, and the following disclaimer, 13 * without modification. 14 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 15 * substantially similar to the "NO WARRANTY" disclaimer below 16 * ("Disclaimer") and any redistribution must be conditioned upon 17 * including a substantially similar Disclaimer requirement for further 18 * binary redistribution. 19 * 3. Neither the names of the above-listed copyright holders nor the names 20 * of any contributors may be used to endorse or promote products derived 21 * from this software without specific prior written permission. 22 * 23 * Alternatively, this software may be distributed under the terms of the 24 * GNU General Public License ("GPL") version 2 as published by the Free 25 * Software Foundation. 26 * 27 * NO WARRANTY 28 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 29 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 30 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 31 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 32 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 33 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 34 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 35 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 36 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 37 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 38 * POSSIBILITY OF SUCH DAMAGES. 39 * 40 * $Id: //depot/aic7xxx/aic7xxx/aic7xxx.h#85 $ 41 * 42 * $FreeBSD$ 43 */ 44 45 #ifndef _AIC7XXX_H_ 46 #define _AIC7XXX_H_ 47 48 /* Register Definitions */ 49 #include "aic7xxx_reg.h" 50 51 /************************* Forward Declarations *******************************/ 52 struct ahc_platform_data; 53 struct scb_platform_data; 54 struct seeprom_descriptor; 55 56 /****************************** Useful Macros *********************************/ 57 #ifndef TRUE 58 #define TRUE 1 59 #endif 60 #ifndef FALSE 61 #define FALSE 0 62 #endif 63 64 #define ALL_CHANNELS '\0' 65 #define ALL_TARGETS_MASK 0xFFFF 66 #define INITIATOR_WILDCARD (~0) 67 68 #define SCSIID_TARGET(ahc, scsiid) \ 69 (((scsiid) & ((((ahc)->features & AHC_TWIN) != 0) ? TWIN_TID : TID)) \ 70 >> TID_SHIFT) 71 #define SCSIID_OUR_ID(scsiid) \ 72 ((scsiid) & OID) 73 #define SCSIID_CHANNEL(ahc, scsiid) \ 74 ((((ahc)->features & AHC_TWIN) != 0) \ 75 ? ((((scsiid) & TWIN_CHNLB) != 0) ? 'B' : 'A') \ 76 : 'A') 77 #define SCB_IS_SCSIBUS_B(ahc, scb) \ 78 (SCSIID_CHANNEL(ahc, (scb)->hscb->scsiid) == 'B') 79 #define SCB_GET_OUR_ID(scb) \ 80 SCSIID_OUR_ID((scb)->hscb->scsiid) 81 #define SCB_GET_TARGET(ahc, scb) \ 82 SCSIID_TARGET((ahc), (scb)->hscb->scsiid) 83 #define SCB_GET_CHANNEL(ahc, scb) \ 84 SCSIID_CHANNEL(ahc, (scb)->hscb->scsiid) 85 #define SCB_GET_LUN(scb) \ 86 ((scb)->hscb->lun & LID) 87 #define SCB_GET_TARGET_OFFSET(ahc, scb) \ 88 (SCB_GET_TARGET(ahc, scb) + (SCB_IS_SCSIBUS_B(ahc, scb) ? 8 : 0)) 89 #define SCB_GET_TARGET_MASK(ahc, scb) \ 90 (0x01 << (SCB_GET_TARGET_OFFSET(ahc, scb))) 91 #ifdef AHC_DEBUG 92 #define SCB_IS_SILENT(scb) \ 93 ((ahc_debug & AHC_SHOW_MASKED_ERRORS) == 0 \ 94 && (((scb)->flags & SCB_SILENT) != 0)) 95 #else 96 #define SCB_IS_SILENT(scb) \ 97 (((scb)->flags & SCB_SILENT) != 0) 98 #endif 99 #define TCL_TARGET_OFFSET(tcl) \ 100 ((((tcl) >> 4) & TID) >> 4) 101 #define TCL_LUN(tcl) \ 102 (tcl & (AHC_NUM_LUNS - 1)) 103 #define BUILD_TCL(scsiid, lun) \ 104 ((lun) | (((scsiid) & TID) << 4)) 105 106 #ifndef AHC_TARGET_MODE 107 #undef AHC_TMODE_ENABLE 108 #define AHC_TMODE_ENABLE 0 109 #endif 110 111 /**************************** Driver Constants ********************************/ 112 /* 113 * The maximum number of supported targets. 114 */ 115 #define AHC_NUM_TARGETS 16 116 117 /* 118 * The maximum number of supported luns. 119 * The identify message only supports 64 luns in SPI3. 120 * You can have 2^64 luns when information unit transfers are enabled, 121 * but it is doubtful this driver will ever support IUTs. 122 */ 123 #define AHC_NUM_LUNS 64 124 125 /* 126 * The maximum transfer per S/G segment. 127 */ 128 #define AHC_MAXTRANSFER_SIZE 0x00ffffff /* limited by 24bit counter */ 129 130 /* 131 * The maximum amount of SCB storage in hardware on a controller. 132 * This value represents an upper bound. Controllers vary in the number 133 * they actually support. 134 */ 135 #define AHC_SCB_MAX 255 136 137 /* 138 * The maximum number of concurrent transactions supported per driver instance. 139 * Sequencer Control Blocks (SCBs) store per-transaction information. Although 140 * the space for SCBs on the host adapter varies by model, the driver will 141 * page the SCBs between host and controller memory as needed. We are limited 142 * to 253 because: 143 * 1) The 8bit nature of the RISC engine holds us to an 8bit value. 144 * 2) We reserve one value, 255, to represent the invalid element. 145 * 3) Our input queue scheme requires one SCB to always be reserved 146 * in advance of queuing any SCBs. This takes us down to 254. 147 * 4) To handle our output queue correctly on machines that only 148 * support 32bit stores, we must clear the array 4 bytes at a 149 * time. To avoid colliding with a DMA write from the sequencer, 150 * we must be sure that 4 slots are empty when we write to clear 151 * the queue. This reduces us to 253 SCBs: 1 that just completed 152 * and the known three additional empty slots in the queue that 153 * precede it. 154 */ 155 #define AHC_MAX_QUEUE 253 156 157 /* 158 * The maximum amount of SCB storage we allocate in host memory. This 159 * number should reflect the 1 additional SCB we require to handle our 160 * qinfifo mechanism. 161 */ 162 #define AHC_SCB_MAX_ALLOC (AHC_MAX_QUEUE+1) 163 164 /* 165 * Ring Buffer of incoming target commands. 166 * We allocate 256 to simplify the logic in the sequencer 167 * by using the natural wrap point of an 8bit counter. 168 */ 169 #define AHC_TMODE_CMDS 256 170 171 /* Reset line assertion time in us */ 172 #define AHC_BUSRESET_DELAY 25 173 174 /******************* Chip Characteristics/Operating Settings *****************/ 175 /* 176 * Chip Type 177 * The chip order is from least sophisticated to most sophisticated. 178 */ 179 typedef enum { 180 AHC_NONE = 0x0000, 181 AHC_CHIPID_MASK = 0x00FF, 182 AHC_AIC7770 = 0x0001, 183 AHC_AIC7850 = 0x0002, 184 AHC_AIC7855 = 0x0003, 185 AHC_AIC7859 = 0x0004, 186 AHC_AIC7860 = 0x0005, 187 AHC_AIC7870 = 0x0006, 188 AHC_AIC7880 = 0x0007, 189 AHC_AIC7895 = 0x0008, 190 AHC_AIC7895C = 0x0009, 191 AHC_AIC7890 = 0x000a, 192 AHC_AIC7896 = 0x000b, 193 AHC_AIC7892 = 0x000c, 194 AHC_AIC7899 = 0x000d, 195 AHC_VL = 0x0100, /* Bus type VL */ 196 AHC_EISA = 0x0200, /* Bus type EISA */ 197 AHC_PCI = 0x0400, /* Bus type PCI */ 198 AHC_BUS_MASK = 0x0F00 199 } ahc_chip; 200 201 /* 202 * Features available in each chip type. 203 */ 204 typedef enum { 205 AHC_FENONE = 0x00000, 206 AHC_ULTRA = 0x00001, /* Supports 20MHz Transfers */ 207 AHC_ULTRA2 = 0x00002, /* Supports 40MHz Transfers */ 208 AHC_WIDE = 0x00004, /* Wide Channel */ 209 AHC_TWIN = 0x00008, /* Twin Channel */ 210 AHC_MORE_SRAM = 0x00010, /* 80 bytes instead of 64 */ 211 AHC_CMD_CHAN = 0x00020, /* Has a Command DMA Channel */ 212 AHC_QUEUE_REGS = 0x00040, /* Has Queue management registers */ 213 AHC_SG_PRELOAD = 0x00080, /* Can perform auto-SG preload */ 214 AHC_SPIOCAP = 0x00100, /* Has a Serial Port I/O Cap Register */ 215 AHC_MULTI_TID = 0x00200, /* Has bitmask of TIDs for select-in */ 216 AHC_HS_MAILBOX = 0x00400, /* Has HS_MAILBOX register */ 217 AHC_DT = 0x00800, /* Double Transition transfers */ 218 AHC_NEW_TERMCTL = 0x01000, /* Newer termination scheme */ 219 AHC_MULTI_FUNC = 0x02000, /* Multi-Function Twin Channel Device */ 220 AHC_LARGE_SCBS = 0x04000, /* 64byte SCBs */ 221 AHC_AUTORATE = 0x08000, /* Automatic update of SCSIRATE/OFFSET*/ 222 AHC_AUTOPAUSE = 0x10000, /* Automatic pause on register access */ 223 AHC_TARGETMODE = 0x20000, /* Has tested target mode support */ 224 AHC_MULTIROLE = 0x40000, /* Space for two roles at a time */ 225 AHC_REMOVABLE = 0x80000, /* Hot-Swap supported */ 226 AHC_HVD = 0x100000, /* HVD rather than SE */ 227 AHC_AIC7770_FE = AHC_FENONE, 228 /* 229 * The real 7850 does not support Ultra modes, but there are 230 * several cards that use the generic 7850 PCI ID even though 231 * they are using an Ultra capable chip (7859/7860). We start 232 * out with the AHC_ULTRA feature set and then check the DEVSTATUS 233 * register to determine if the capability is really present. 234 */ 235 AHC_AIC7850_FE = AHC_SPIOCAP|AHC_AUTOPAUSE|AHC_TARGETMODE|AHC_ULTRA, 236 AHC_AIC7860_FE = AHC_AIC7850_FE, 237 AHC_AIC7870_FE = AHC_TARGETMODE|AHC_AUTOPAUSE, 238 AHC_AIC7880_FE = AHC_AIC7870_FE|AHC_ULTRA, 239 /* 240 * Although we have space for both the initiator and 241 * target roles on ULTRA2 chips, we currently disable 242 * the initiator role to allow multi-scsi-id target mode 243 * configurations. We can only respond on the same SCSI 244 * ID as our initiator role if we allow initiator operation. 245 * At some point, we should add a configuration knob to 246 * allow both roles to be loaded. 247 */ 248 AHC_AIC7890_FE = AHC_MORE_SRAM|AHC_CMD_CHAN|AHC_ULTRA2 249 |AHC_QUEUE_REGS|AHC_SG_PRELOAD|AHC_MULTI_TID 250 |AHC_HS_MAILBOX|AHC_NEW_TERMCTL|AHC_LARGE_SCBS 251 |AHC_TARGETMODE, 252 AHC_AIC7892_FE = AHC_AIC7890_FE|AHC_DT|AHC_AUTORATE|AHC_AUTOPAUSE, 253 AHC_AIC7895_FE = AHC_AIC7880_FE|AHC_MORE_SRAM|AHC_AUTOPAUSE 254 |AHC_CMD_CHAN|AHC_MULTI_FUNC|AHC_LARGE_SCBS, 255 AHC_AIC7895C_FE = AHC_AIC7895_FE|AHC_MULTI_TID, 256 AHC_AIC7896_FE = AHC_AIC7890_FE|AHC_MULTI_FUNC, 257 AHC_AIC7899_FE = AHC_AIC7892_FE|AHC_MULTI_FUNC 258 } ahc_feature; 259 260 /* 261 * Bugs in the silicon that we work around in software. 262 */ 263 typedef enum { 264 AHC_BUGNONE = 0x00, 265 /* 266 * On all chips prior to the U2 product line, 267 * the WIDEODD S/G segment feature does not 268 * work during scsi->HostBus transfers. 269 */ 270 AHC_TMODE_WIDEODD_BUG = 0x01, 271 /* 272 * On the aic7890/91 Rev 0 chips, the autoflush 273 * feature does not work. A manual flush of 274 * the DMA FIFO is required. 275 */ 276 AHC_AUTOFLUSH_BUG = 0x02, 277 /* 278 * On many chips, cacheline streaming does not work. 279 */ 280 AHC_CACHETHEN_BUG = 0x04, 281 /* 282 * On the aic7896/97 chips, cacheline 283 * streaming must be enabled. 284 */ 285 AHC_CACHETHEN_DIS_BUG = 0x08, 286 /* 287 * PCI 2.1 Retry failure on non-empty data fifo. 288 */ 289 AHC_PCI_2_1_RETRY_BUG = 0x10, 290 /* 291 * Controller does not handle cacheline residuals 292 * properly on S/G segments if PCI MWI instructions 293 * are allowed. 294 */ 295 AHC_PCI_MWI_BUG = 0x20, 296 /* 297 * An SCB upload using the SCB channel's 298 * auto array entry copy feature may 299 * corrupt data. This appears to only 300 * occur on 66MHz systems. 301 */ 302 AHC_SCBCHAN_UPLOAD_BUG = 0x40 303 } ahc_bug; 304 305 /* 306 * Configuration specific settings. 307 * The driver determines these settings by probing the 308 * chip/controller's configuration. 309 */ 310 typedef enum { 311 AHC_FNONE = 0x000, 312 AHC_PRIMARY_CHANNEL = 0x003, /* 313 * The channel that should 314 * be probed first. 315 */ 316 AHC_USEDEFAULTS = 0x004, /* 317 * For cards without an seeprom 318 * or a BIOS to initialize the chip's 319 * SRAM, we use the default target 320 * settings. 321 */ 322 AHC_SEQUENCER_DEBUG = 0x008, 323 AHC_SHARED_SRAM = 0x010, 324 AHC_LARGE_SEEPROM = 0x020, /* Uses C56_66 not C46 */ 325 AHC_RESET_BUS_A = 0x040, 326 AHC_RESET_BUS_B = 0x080, 327 AHC_EXTENDED_TRANS_A = 0x100, 328 AHC_EXTENDED_TRANS_B = 0x200, 329 AHC_TERM_ENB_A = 0x400, 330 AHC_TERM_ENB_B = 0x800, 331 AHC_INITIATORROLE = 0x1000, /* 332 * Allow initiator operations on 333 * this controller. 334 */ 335 AHC_TARGETROLE = 0x2000, /* 336 * Allow target operations on this 337 * controller. 338 */ 339 AHC_NEWEEPROM_FMT = 0x4000, 340 AHC_TQINFIFO_BLOCKED = 0x10000, /* Blocked waiting for ATIOs */ 341 AHC_INT50_SPEEDFLEX = 0x20000, /* 342 * Internal 50pin connector 343 * sits behind an aic3860 344 */ 345 AHC_SCB_BTT = 0x40000, /* 346 * The busy targets table is 347 * stored in SCB space rather 348 * than SRAM. 349 */ 350 AHC_BIOS_ENABLED = 0x80000, 351 AHC_ALL_INTERRUPTS = 0x100000, 352 AHC_PAGESCBS = 0x400000, /* Enable SCB paging */ 353 AHC_EDGE_INTERRUPT = 0x800000, /* Device uses edge triggered ints */ 354 AHC_39BIT_ADDRESSING = 0x1000000, /* Use 39 bit addressing scheme. */ 355 AHC_LSCBS_ENABLED = 0x2000000, /* 64Byte SCBs enabled */ 356 AHC_SCB_CONFIG_USED = 0x4000000, /* No SEEPROM but SCB2 had info. */ 357 AHC_NO_BIOS_INIT = 0x8000000, /* No BIOS left over settings. */ 358 AHC_DISABLE_PCI_PERR = 0x10000000, 359 AHC_HAS_TERM_LOGIC = 0x20000000 360 } ahc_flag; 361 362 /************************* Hardware SCB Definition ***************************/ 363 364 /* 365 * The driver keeps up to MAX_SCB scb structures per card in memory. The SCB 366 * consists of a "hardware SCB" mirroring the fields available on the card 367 * and additional information the kernel stores for each transaction. 368 * 369 * To minimize space utilization, a portion of the hardware scb stores 370 * different data during different portions of a SCSI transaction. 371 * As initialized by the host driver for the initiator role, this area 372 * contains the SCSI cdb (or a pointer to the cdb) to be executed. After 373 * the cdb has been presented to the target, this area serves to store 374 * residual transfer information and the SCSI status byte. 375 * For the target role, the contents of this area do not change, but 376 * still serve a different purpose than for the initiator role. See 377 * struct target_data for details. 378 */ 379 380 /* 381 * Status information embedded in the shared poriton of 382 * an SCB after passing the cdb to the target. The kernel 383 * driver will only read this data for transactions that 384 * complete abnormally (non-zero status byte). 385 */ 386 struct status_pkt { 387 uint32_t residual_datacnt; /* Residual in the current S/G seg */ 388 uint32_t residual_sg_ptr; /* The next S/G for this transfer */ 389 uint8_t scsi_status; /* Standard SCSI status byte */ 390 }; 391 392 /* 393 * Target mode version of the shared data SCB segment. 394 */ 395 struct target_data { 396 uint32_t residual_datacnt; /* Residual in the current S/G seg */ 397 uint32_t residual_sg_ptr; /* The next S/G for this transfer */ 398 uint8_t scsi_status; /* SCSI status to give to initiator */ 399 uint8_t target_phases; /* Bitmap of phases to execute */ 400 uint8_t data_phase; /* Data-In or Data-Out */ 401 uint8_t initiator_tag; /* Initiator's transaction tag */ 402 }; 403 404 struct hardware_scb { 405 /*0*/ union { 406 /* 407 * If the cdb is 12 bytes or less, we embed it directly 408 * in the SCB. For longer cdbs, we embed the address 409 * of the cdb payload as seen by the chip and a DMA 410 * is used to pull it in. 411 */ 412 uint8_t cdb[12]; 413 uint32_t cdb_ptr; 414 struct status_pkt status; 415 struct target_data tdata; 416 } shared_data; 417 /* 418 * A word about residuals. 419 * The scb is presented to the sequencer with the dataptr and datacnt 420 * fields initialized to the contents of the first S/G element to 421 * transfer. The sgptr field is initialized to the bus address for 422 * the S/G element that follows the first in the in core S/G array 423 * or'ed with the SG_FULL_RESID flag. Sgptr may point to an invalid 424 * S/G entry for this transfer (single S/G element transfer with the 425 * first elements address and length preloaded in the dataptr/datacnt 426 * fields). If no transfer is to occur, sgptr is set to SG_LIST_NULL. 427 * The SG_FULL_RESID flag ensures that the residual will be correctly 428 * noted even if no data transfers occur. Once the data phase is entered, 429 * the residual sgptr and datacnt are loaded from the sgptr and the 430 * datacnt fields. After each S/G element's dataptr and length are 431 * loaded into the hardware, the residual sgptr is advanced. After 432 * each S/G element is expired, its datacnt field is checked to see 433 * if the LAST_SEG flag is set. If so, SG_LIST_NULL is set in the 434 * residual sg ptr and the transfer is considered complete. If the 435 * sequencer determines that there is a residual in the tranfer, it 436 * will set the SG_RESID_VALID flag in sgptr and dma the scb back into 437 * host memory. To sumarize: 438 * 439 * Sequencer: 440 * o A residual has occurred if SG_FULL_RESID is set in sgptr, 441 * or residual_sgptr does not have SG_LIST_NULL set. 442 * 443 * o We are transferring the last segment if residual_datacnt has 444 * the SG_LAST_SEG flag set. 445 * 446 * Host: 447 * o A residual has occurred if a completed scb has the 448 * SG_RESID_VALID flag set. 449 * 450 * o residual_sgptr and sgptr refer to the "next" sg entry 451 * and so may point beyond the last valid sg entry for the 452 * transfer. 453 */ 454 /*12*/ uint32_t dataptr; 455 /*16*/ uint32_t datacnt; /* 456 * Byte 3 (numbered from 0) of 457 * the datacnt is really the 458 * 4th byte in that data address. 459 */ 460 /*20*/ uint32_t sgptr; 461 #define SG_PTR_MASK 0xFFFFFFF8 462 /*24*/ uint8_t control; /* See SCB_CONTROL in aic7xxx.reg for details */ 463 /*25*/ uint8_t scsiid; /* what to load in the SCSIID register */ 464 /*26*/ uint8_t lun; 465 /*27*/ uint8_t tag; /* 466 * Index into our kernel SCB array. 467 * Also used as the tag for tagged I/O 468 */ 469 /*28*/ uint8_t cdb_len; 470 /*29*/ uint8_t scsirate; /* Value for SCSIRATE register */ 471 /*30*/ uint8_t scsioffset; /* Value for SCSIOFFSET register */ 472 /*31*/ uint8_t next; /* 473 * Used for threading SCBs in the 474 * "Waiting for Selection" and 475 * "Disconnected SCB" lists down 476 * in the sequencer. 477 */ 478 /*32*/ uint8_t cdb32[32]; /* 479 * CDB storage for cdbs of size 480 * 13->32. We store them here 481 * because hardware scbs are 482 * allocated from DMA safe 483 * memory so we are guaranteed 484 * the controller can access 485 * this data. 486 */ 487 }; 488 489 /************************ Kernel SCB Definitions ******************************/ 490 /* 491 * Some fields of the SCB are OS dependent. Here we collect the 492 * definitions for elements that all OS platforms need to include 493 * in there SCB definition. 494 */ 495 496 /* 497 * Definition of a scatter/gather element as transferred to the controller. 498 * The aic7xxx chips only support a 24bit length. We use the top byte of 499 * the length to store additional address bits and a flag to indicate 500 * that a given segment terminates the transfer. This gives us an 501 * addressable range of 512GB on machines with 64bit PCI or with chips 502 * that can support dual address cycles on 32bit PCI busses. 503 */ 504 struct ahc_dma_seg { 505 uint32_t addr; 506 uint32_t len; 507 #define AHC_DMA_LAST_SEG 0x80000000 508 #define AHC_SG_HIGH_ADDR_MASK 0x7F000000 509 #define AHC_SG_LEN_MASK 0x00FFFFFF 510 }; 511 512 struct sg_map_node { 513 bus_dmamap_t sg_dmamap; 514 dma_addr_t sg_physaddr; 515 struct ahc_dma_seg* sg_vaddr; 516 SLIST_ENTRY(sg_map_node) links; 517 }; 518 519 /* 520 * The current state of this SCB. 521 */ 522 typedef enum { 523 SCB_FREE = 0x0000, 524 SCB_OTHERTCL_TIMEOUT = 0x0002,/* 525 * Another device was active 526 * during the first timeout for 527 * this SCB so we gave ourselves 528 * an additional timeout period 529 * in case it was hogging the 530 * bus. 531 */ 532 SCB_DEVICE_RESET = 0x0004, 533 SCB_SENSE = 0x0008, 534 SCB_CDB32_PTR = 0x0010, 535 SCB_RECOVERY_SCB = 0x0020, 536 SCB_AUTO_NEGOTIATE = 0x0040,/* Negotiate to achieve goal. */ 537 SCB_NEGOTIATE = 0x0080,/* Negotiation forced for command. */ 538 SCB_ABORT = 0x0100, 539 SCB_UNTAGGEDQ = 0x0200, 540 SCB_ACTIVE = 0x0400, 541 SCB_TARGET_IMMEDIATE = 0x0800, 542 SCB_TRANSMISSION_ERROR = 0x1000,/* 543 * We detected a parity or CRC 544 * error that has effected the 545 * payload of the command. This 546 * flag is checked when normal 547 * status is returned to catch 548 * the case of a target not 549 * responding to our attempt 550 * to report the error. 551 */ 552 SCB_TARGET_SCB = 0x2000, 553 SCB_SILENT = 0x4000 /* 554 * Be quiet about transmission type 555 * errors. They are expected and we 556 * don't want to upset the user. This 557 * flag is typically used during DV. 558 */ 559 } scb_flag; 560 561 struct scb { 562 struct hardware_scb *hscb; 563 union { 564 SLIST_ENTRY(scb) sle; 565 TAILQ_ENTRY(scb) tqe; 566 } links; 567 LIST_ENTRY(scb) pending_links; 568 ahc_io_ctx_t io_ctx; 569 struct ahc_softc *ahc_softc; 570 scb_flag flags; 571 struct scb_platform_data *platform_data; 572 struct sg_map_node *sg_map; 573 struct ahc_dma_seg *sg_list; 574 dma_addr_t sg_list_phys; 575 u_int sg_count;/* How full ahc_dma_seg is */ 576 }; 577 578 struct scb_data { 579 SLIST_HEAD(, scb) free_scbs; /* 580 * Pool of SCBs ready to be assigned 581 * commands to execute. 582 */ 583 struct scb *scbindex[256]; /* 584 * Mapping from tag to SCB. 585 * As tag identifiers are an 586 * 8bit value, we provide space 587 * for all possible tag values. 588 * Any lookups to entries at or 589 * above AHC_SCB_MAX_ALLOC will 590 * always fail. 591 */ 592 struct hardware_scb *hscbs; /* Array of hardware SCBs */ 593 struct scb *scbarray; /* Array of kernel SCBs */ 594 struct scsi_sense_data *sense; /* Per SCB sense data */ 595 596 /* 597 * "Bus" addresses of our data structures. 598 */ 599 bus_dma_tag_t hscb_dmat; /* dmat for our hardware SCB array */ 600 bus_dmamap_t hscb_dmamap; 601 dma_addr_t hscb_busaddr; 602 bus_dma_tag_t sense_dmat; 603 bus_dmamap_t sense_dmamap; 604 dma_addr_t sense_busaddr; 605 bus_dma_tag_t sg_dmat; /* dmat for our sg segments */ 606 SLIST_HEAD(, sg_map_node) sg_maps; 607 uint8_t numscbs; 608 uint8_t maxhscbs; /* Number of SCBs on the card */ 609 uint8_t init_level; /* 610 * How far we've initialized 611 * this structure. 612 */ 613 }; 614 615 /************************ Target Mode Definitions *****************************/ 616 617 /* 618 * Connection descriptor for select-in requests in target mode. 619 */ 620 struct target_cmd { 621 uint8_t scsiid; /* Our ID and the initiator's ID */ 622 uint8_t identify; /* Identify message */ 623 uint8_t bytes[22]; /* 624 * Bytes contains any additional message 625 * bytes terminated by 0xFF. The remainder 626 * is the cdb to execute. 627 */ 628 uint8_t cmd_valid; /* 629 * When a command is complete, the firmware 630 * will set cmd_valid to all bits set. 631 * After the host has seen the command, 632 * the bits are cleared. This allows us 633 * to just peek at host memory to determine 634 * if more work is complete. cmd_valid is on 635 * an 8 byte boundary to simplify setting 636 * it on aic7880 hardware which only has 637 * limited direct access to the DMA FIFO. 638 */ 639 uint8_t pad[7]; 640 }; 641 642 /* 643 * Number of events we can buffer up if we run out 644 * of immediate notify ccbs. 645 */ 646 #define AHC_TMODE_EVENT_BUFFER_SIZE 8 647 struct ahc_tmode_event { 648 uint8_t initiator_id; 649 uint8_t event_type; /* MSG type or EVENT_TYPE_BUS_RESET */ 650 #define EVENT_TYPE_BUS_RESET 0xFF 651 uint8_t event_arg; 652 }; 653 654 /* 655 * Per enabled lun target mode state. 656 * As this state is directly influenced by the host OS'es target mode 657 * environment, we let the OS module define it. Forward declare the 658 * structure here so we can store arrays of them, etc. in OS neutral 659 * data structures. 660 */ 661 #ifdef AHC_TARGET_MODE 662 struct ahc_tmode_lstate { 663 struct cam_path *path; 664 struct ccb_hdr_slist accept_tios; 665 struct ccb_hdr_slist immed_notifies; 666 struct ahc_tmode_event event_buffer[AHC_TMODE_EVENT_BUFFER_SIZE]; 667 uint8_t event_r_idx; 668 uint8_t event_w_idx; 669 }; 670 #else 671 struct ahc_tmode_lstate; 672 #endif 673 674 /******************** Transfer Negotiation Datastructures *********************/ 675 #define AHC_TRANS_CUR 0x01 /* Modify current neogtiation status */ 676 #define AHC_TRANS_ACTIVE 0x03 /* Assume this target is on the bus */ 677 #define AHC_TRANS_GOAL 0x04 /* Modify negotiation goal */ 678 #define AHC_TRANS_USER 0x08 /* Modify user negotiation settings */ 679 680 #define AHC_WIDTH_UNKNOWN 0xFF 681 #define AHC_PERIOD_UNKNOWN 0xFF 682 #define AHC_OFFSET_UNKNOWN 0xFF 683 #define AHC_PPR_OPTS_UNKNOWN 0xFF 684 685 /* 686 * Transfer Negotiation Information. 687 */ 688 struct ahc_transinfo { 689 uint8_t protocol_version; /* SCSI Revision level */ 690 uint8_t transport_version; /* SPI Revision level */ 691 uint8_t width; /* Bus width */ 692 uint8_t period; /* Sync rate factor */ 693 uint8_t offset; /* Sync offset */ 694 uint8_t ppr_options; /* Parallel Protocol Request options */ 695 }; 696 697 /* 698 * Per-initiator current, goal and user transfer negotiation information. */ 699 struct ahc_initiator_tinfo { 700 uint8_t scsirate; /* Computed value for SCSIRATE reg */ 701 struct ahc_transinfo curr; 702 struct ahc_transinfo goal; 703 struct ahc_transinfo user; 704 }; 705 706 /* 707 * Per enabled target ID state. 708 * Pointers to lun target state as well as sync/wide negotiation information 709 * for each initiator<->target mapping. For the initiator role we pretend 710 * that we are the target and the targets are the initiators since the 711 * negotiation is the same regardless of role. 712 */ 713 struct ahc_tmode_tstate { 714 struct ahc_tmode_lstate* enabled_luns[AHC_NUM_LUNS]; 715 struct ahc_initiator_tinfo transinfo[AHC_NUM_TARGETS]; 716 717 /* 718 * Per initiator state bitmasks. 719 */ 720 uint16_t auto_negotiate;/* Auto Negotiation Required */ 721 uint16_t ultraenb; /* Using ultra sync rate */ 722 uint16_t discenable; /* Disconnection allowed */ 723 uint16_t tagenable; /* Tagged Queuing allowed */ 724 }; 725 726 /* 727 * Data structure for our table of allowed synchronous transfer rates. 728 */ 729 struct ahc_syncrate { 730 u_int sxfr_u2; /* Value of the SXFR parameter for Ultra2+ Chips */ 731 u_int sxfr; /* Value of the SXFR parameter for <= Ultra Chips */ 732 #define ULTRA_SXFR 0x100 /* Rate Requires Ultra Mode set */ 733 #define ST_SXFR 0x010 /* Rate Single Transition Only */ 734 #define DT_SXFR 0x040 /* Rate Double Transition Only */ 735 uint8_t period; /* Period to send to SCSI target */ 736 const char *rate; 737 }; 738 739 /* Safe and valid period for async negotiations. */ 740 #define AHC_ASYNC_XFER_PERIOD 0x45 741 #define AHC_ULTRA2_XFER_PERIOD 0x0a 742 743 /* 744 * Indexes into our table of syncronous transfer rates. 745 */ 746 #define AHC_SYNCRATE_DT 0 747 #define AHC_SYNCRATE_ULTRA2 1 748 #define AHC_SYNCRATE_ULTRA 3 749 #define AHC_SYNCRATE_FAST 6 750 #define AHC_SYNCRATE_MAX AHC_SYNCRATE_DT 751 #define AHC_SYNCRATE_MIN 13 752 753 /***************************** Lookup Tables **********************************/ 754 /* 755 * Phase -> name and message out response 756 * to parity errors in each phase table. 757 */ 758 struct ahc_phase_table_entry { 759 uint8_t phase; 760 uint8_t mesg_out; /* Message response to parity errors */ 761 char *phasemsg; 762 }; 763 764 /************************** Serial EEPROM Format ******************************/ 765 766 struct seeprom_config { 767 /* 768 * Per SCSI ID Configuration Flags 769 */ 770 uint16_t device_flags[16]; /* words 0-15 */ 771 #define CFXFER 0x0007 /* synchronous transfer rate */ 772 #define CFSYNCH 0x0008 /* enable synchronous transfer */ 773 #define CFDISC 0x0010 /* enable disconnection */ 774 #define CFWIDEB 0x0020 /* wide bus device */ 775 #define CFSYNCHISULTRA 0x0040 /* CFSYNCH is an ultra offset (2940AU)*/ 776 #define CFSYNCSINGLE 0x0080 /* Single-Transition signalling */ 777 #define CFSTART 0x0100 /* send start unit SCSI command */ 778 #define CFINCBIOS 0x0200 /* include in BIOS scan */ 779 #define CFRNFOUND 0x0400 /* report even if not found */ 780 #define CFMULTILUNDEV 0x0800 /* Probe multiple luns in BIOS scan */ 781 #define CFWBCACHEENB 0x4000 /* Enable W-Behind Cache on disks */ 782 #define CFWBCACHENOP 0xc000 /* Don't touch W-Behind Cache */ 783 784 /* 785 * BIOS Control Bits 786 */ 787 uint16_t bios_control; /* word 16 */ 788 #define CFSUPREM 0x0001 /* support all removeable drives */ 789 #define CFSUPREMB 0x0002 /* support removeable boot drives */ 790 #define CFBIOSEN 0x0004 /* BIOS enabled */ 791 #define CFBIOS_BUSSCAN 0x0008 /* Have the BIOS Scan the Bus */ 792 #define CFSM2DRV 0x0010 /* support more than two drives */ 793 #define CFSTPWLEVEL 0x0010 /* Termination level control */ 794 #define CF284XEXTEND 0x0020 /* extended translation (284x cards) */ 795 #define CFCTRL_A 0x0020 /* BIOS displays Ctrl-A message */ 796 #define CFTERM_MENU 0x0040 /* BIOS displays termination menu */ 797 #define CFEXTEND 0x0080 /* extended translation enabled */ 798 #define CFSCAMEN 0x0100 /* SCAM enable */ 799 #define CFMSG_LEVEL 0x0600 /* BIOS Message Level */ 800 #define CFMSG_VERBOSE 0x0000 801 #define CFMSG_SILENT 0x0200 802 #define CFMSG_DIAG 0x0400 803 #define CFBOOTCD 0x0800 /* Support Bootable CD-ROM */ 804 /* UNUSED 0xff00 */ 805 806 /* 807 * Host Adapter Control Bits 808 */ 809 uint16_t adapter_control; /* word 17 */ 810 #define CFAUTOTERM 0x0001 /* Perform Auto termination */ 811 #define CFULTRAEN 0x0002 /* Ultra SCSI speed enable */ 812 #define CF284XSELTO 0x0003 /* Selection timeout (284x cards) */ 813 #define CF284XFIFO 0x000C /* FIFO Threshold (284x cards) */ 814 #define CFSTERM 0x0004 /* SCSI low byte termination */ 815 #define CFWSTERM 0x0008 /* SCSI high byte termination */ 816 #define CFSPARITY 0x0010 /* SCSI parity */ 817 #define CF284XSTERM 0x0020 /* SCSI low byte term (284x cards) */ 818 #define CFMULTILUN 0x0020 819 #define CFRESETB 0x0040 /* reset SCSI bus at boot */ 820 #define CFCLUSTERENB 0x0080 /* Cluster Enable */ 821 #define CFBOOTCHAN 0x0300 /* probe this channel first */ 822 #define CFBOOTCHANSHIFT 8 823 #define CFSEAUTOTERM 0x0400 /* Ultra2 Perform secondary Auto Term*/ 824 #define CFSELOWTERM 0x0800 /* Ultra2 secondary low term */ 825 #define CFSEHIGHTERM 0x1000 /* Ultra2 secondary high term */ 826 #define CFENABLEDV 0x4000 /* Perform Domain Validation*/ 827 828 /* 829 * Bus Release Time, Host Adapter ID 830 */ 831 uint16_t brtime_id; /* word 18 */ 832 #define CFSCSIID 0x000f /* host adapter SCSI ID */ 833 /* UNUSED 0x00f0 */ 834 #define CFBRTIME 0xff00 /* bus release time */ 835 836 /* 837 * Maximum targets 838 */ 839 uint16_t max_targets; /* word 19 */ 840 #define CFMAXTARG 0x00ff /* maximum targets */ 841 #define CFBOOTLUN 0x0f00 /* Lun to boot from */ 842 #define CFBOOTID 0xf000 /* Target to boot from */ 843 uint16_t res_1[10]; /* words 20-29 */ 844 uint16_t signature; /* Signature == 0x250 */ 845 #define CFSIGNATURE 0x250 846 #define CFSIGNATURE2 0x300 847 uint16_t checksum; /* word 31 */ 848 }; 849 850 /**************************** Message Buffer *********************************/ 851 typedef enum { 852 MSG_TYPE_NONE = 0x00, 853 MSG_TYPE_INITIATOR_MSGOUT = 0x01, 854 MSG_TYPE_INITIATOR_MSGIN = 0x02, 855 MSG_TYPE_TARGET_MSGOUT = 0x03, 856 MSG_TYPE_TARGET_MSGIN = 0x04 857 } ahc_msg_type; 858 859 typedef enum { 860 MSGLOOP_IN_PROG, 861 MSGLOOP_MSGCOMPLETE, 862 MSGLOOP_TERMINATED 863 } msg_loop_stat; 864 865 /*********************** Software Configuration Structure *********************/ 866 TAILQ_HEAD(scb_tailq, scb); 867 868 struct ahc_aic7770_softc { 869 /* 870 * Saved register state used for chip_init(). 871 */ 872 uint8_t busspd; 873 uint8_t bustime; 874 }; 875 876 struct ahc_pci_softc { 877 /* 878 * Saved register state used for chip_init(). 879 */ 880 uint32_t devconfig; 881 uint16_t targcrccnt; 882 uint8_t command; 883 uint8_t csize_lattime; 884 uint8_t optionmode; 885 uint8_t crccontrol1; 886 uint8_t dscommand0; 887 uint8_t dspcistatus; 888 uint8_t scbbaddr; 889 uint8_t dff_thrsh; 890 }; 891 892 union ahc_bus_softc { 893 struct ahc_aic7770_softc aic7770_softc; 894 struct ahc_pci_softc pci_softc; 895 }; 896 897 typedef void (*ahc_bus_intr_t)(struct ahc_softc *); 898 typedef int (*ahc_bus_chip_init_t)(struct ahc_softc *); 899 typedef void ahc_callback_t (void *); 900 901 struct ahc_softc { 902 bus_space_tag_t tag; 903 bus_space_handle_t bsh; 904 struct scb_data *scb_data; 905 906 struct scb *next_queued_scb; 907 908 /* 909 * SCBs that have been sent to the controller 910 */ 911 BSD_LIST_HEAD(, scb) pending_scbs; 912 913 /* 914 * Counting lock for deferring the release of additional 915 * untagged transactions from the untagged_queues. When 916 * the lock is decremented to 0, all queues in the 917 * untagged_queues array are run. 918 */ 919 u_int untagged_queue_lock; 920 921 /* 922 * Per-target queue of untagged-transactions. The 923 * transaction at the head of the queue is the 924 * currently pending untagged transaction for the 925 * target. The driver only allows a single untagged 926 * transaction per target. 927 */ 928 struct scb_tailq untagged_queues[AHC_NUM_TARGETS]; 929 930 /* 931 * Bus attachment specific data. 932 */ 933 union ahc_bus_softc bus_softc; 934 935 /* 936 * Platform specific data. 937 */ 938 struct ahc_platform_data *platform_data; 939 940 /* 941 * Platform specific device information. 942 */ 943 ahc_dev_softc_t dev_softc; 944 struct device *dev; 945 946 /* 947 * Bus specific device information. 948 */ 949 ahc_bus_intr_t bus_intr; 950 951 /* 952 * Bus specific initialization required 953 * after a chip reset. 954 */ 955 ahc_bus_chip_init_t bus_chip_init; 956 957 /* 958 * Target mode related state kept on a per enabled lun basis. 959 * Targets that are not enabled will have null entries. 960 * As an initiator, we keep one target entry for our initiator 961 * ID to store our sync/wide transfer settings. 962 */ 963 struct ahc_tmode_tstate *enabled_targets[AHC_NUM_TARGETS]; 964 965 /* 966 * The black hole device responsible for handling requests for 967 * disabled luns on enabled targets. 968 */ 969 struct ahc_tmode_lstate *black_hole; 970 971 /* 972 * Device instance currently on the bus awaiting a continue TIO 973 * for a command that was not given the disconnect priveledge. 974 */ 975 struct ahc_tmode_lstate *pending_device; 976 977 /* 978 * Card characteristics 979 */ 980 ahc_chip chip; 981 ahc_feature features; 982 ahc_bug bugs; 983 ahc_flag flags; 984 struct seeprom_config *seep_config; 985 986 /* Values to store in the SEQCTL register for pause and unpause */ 987 uint8_t unpause; 988 uint8_t pause; 989 990 /* Command Queues */ 991 uint8_t qoutfifonext; 992 uint8_t qinfifonext; 993 uint8_t *qoutfifo; 994 uint8_t *qinfifo; 995 996 /* Critical Section Data */ 997 struct cs *critical_sections; 998 u_int num_critical_sections; 999 1000 /* Channel Names ('A', 'B', etc.) */ 1001 char channel; 1002 char channel_b; 1003 1004 /* Initiator Bus ID */ 1005 uint8_t our_id; 1006 uint8_t our_id_b; 1007 1008 /* 1009 * PCI error detection. 1010 */ 1011 int unsolicited_ints; 1012 1013 /* 1014 * Target incoming command FIFO. 1015 */ 1016 struct target_cmd *targetcmds; 1017 uint8_t tqinfifonext; 1018 1019 /* 1020 * Cached copy of the sequencer control register. 1021 */ 1022 uint8_t seqctl; 1023 1024 /* 1025 * Incoming and outgoing message handling. 1026 */ 1027 uint8_t send_msg_perror; 1028 ahc_msg_type msg_type; 1029 uint8_t msgout_buf[12];/* Message we are sending */ 1030 uint8_t msgin_buf[12];/* Message we are receiving */ 1031 u_int msgout_len; /* Length of message to send */ 1032 u_int msgout_index; /* Current index in msgout */ 1033 u_int msgin_index; /* Current index in msgin */ 1034 1035 /* 1036 * Mapping information for data structures shared 1037 * between the sequencer and kernel. 1038 */ 1039 bus_dma_tag_t parent_dmat; 1040 bus_dma_tag_t shared_data_dmat; 1041 bus_dmamap_t shared_data_dmamap; 1042 dma_addr_t shared_data_busaddr; 1043 1044 /* 1045 * Bus address of the one byte buffer used to 1046 * work-around a DMA bug for chips <= aic7880 1047 * in target mode. 1048 */ 1049 dma_addr_t dma_bug_buf; 1050 1051 /* Number of enabled target mode device on this card */ 1052 u_int enabled_luns; 1053 1054 /* Initialization level of this data structure */ 1055 u_int init_level; 1056 1057 /* PCI cacheline size. */ 1058 u_int pci_cachesize; 1059 1060 /* 1061 * Count of parity errors we have seen as a target. 1062 * We auto-disable parity error checking after seeing 1063 * AHC_PCI_TARGET_PERR_THRESH number of errors. 1064 */ 1065 u_int pci_target_perr_count; 1066 #define AHC_PCI_TARGET_PERR_THRESH 10 1067 1068 /* Maximum number of sequencer instructions supported. */ 1069 u_int instruction_ram_size; 1070 1071 /* Per-Unit descriptive information */ 1072 const char *description; 1073 char *name; 1074 int unit; 1075 1076 /* Selection Timer settings */ 1077 int seltime; 1078 int seltime_b; 1079 1080 uint16_t user_discenable;/* Disconnection allowed */ 1081 uint16_t user_tagenable;/* Tagged Queuing allowed */ 1082 }; 1083 1084 /************************ Active Device Information ***************************/ 1085 typedef enum { 1086 ROLE_UNKNOWN, 1087 ROLE_INITIATOR, 1088 ROLE_TARGET 1089 } role_t; 1090 1091 struct ahc_devinfo { 1092 int our_scsiid; 1093 int target_offset; 1094 uint16_t target_mask; 1095 u_int target; 1096 u_int lun; 1097 char channel; 1098 role_t role; /* 1099 * Only guaranteed to be correct if not 1100 * in the busfree state. 1101 */ 1102 }; 1103 1104 /****************************** PCI Structures ********************************/ 1105 typedef int (ahc_device_setup_t)(struct ahc_softc *); 1106 1107 struct ahc_pci_identity { 1108 uint64_t full_id; 1109 uint64_t id_mask; 1110 const char *name; 1111 ahc_device_setup_t *setup; 1112 }; 1113 1114 /***************************** VL/EISA Declarations ***************************/ 1115 struct aic7770_identity { 1116 uint32_t full_id; 1117 uint32_t id_mask; 1118 const char *name; 1119 ahc_device_setup_t *setup; 1120 }; 1121 extern struct aic7770_identity aic7770_ident_table[]; 1122 extern const int ahc_num_aic7770_devs; 1123 1124 #define AHC_EISA_SLOT_OFFSET 0xc00 1125 #define AHC_EISA_IOSIZE 0x100 1126 1127 /*************************** Function Declarations ****************************/ 1128 /******************************************************************************/ 1129 1130 /***************************** PCI Front End *********************************/ 1131 const struct ahc_pci_identity *ahc_find_pci_device(ahc_dev_softc_t); 1132 int ahc_pci_config(struct ahc_softc *, 1133 const struct ahc_pci_identity *); 1134 int ahc_pci_test_register_access(struct ahc_softc *); 1135 void __maybe_unused ahc_pci_resume(struct ahc_softc *ahc); 1136 1137 /*************************** EISA/VL Front End ********************************/ 1138 struct aic7770_identity *aic7770_find_device(uint32_t); 1139 int aic7770_config(struct ahc_softc *ahc, 1140 struct aic7770_identity *, 1141 u_int port); 1142 1143 /************************** SCB and SCB queue management **********************/ 1144 int ahc_probe_scbs(struct ahc_softc *); 1145 void ahc_qinfifo_requeue_tail(struct ahc_softc *ahc, 1146 struct scb *scb); 1147 int ahc_match_scb(struct ahc_softc *ahc, struct scb *scb, 1148 int target, char channel, int lun, 1149 u_int tag, role_t role); 1150 1151 /****************************** Initialization ********************************/ 1152 struct ahc_softc *ahc_alloc(void *platform_arg, char *name); 1153 int ahc_softc_init(struct ahc_softc *); 1154 void ahc_controller_info(struct ahc_softc *ahc, char *buf); 1155 int ahc_chip_init(struct ahc_softc *ahc); 1156 int ahc_init(struct ahc_softc *ahc); 1157 void ahc_intr_enable(struct ahc_softc *ahc, int enable); 1158 void ahc_pause_and_flushwork(struct ahc_softc *ahc); 1159 int __maybe_unused ahc_suspend(struct ahc_softc *ahc); 1160 int __maybe_unused ahc_resume(struct ahc_softc *ahc); 1161 void ahc_set_unit(struct ahc_softc *, int); 1162 void ahc_set_name(struct ahc_softc *, char *); 1163 void ahc_free(struct ahc_softc *ahc); 1164 int ahc_reset(struct ahc_softc *ahc, int reinit); 1165 1166 /***************************** Error Recovery *********************************/ 1167 typedef enum { 1168 SEARCH_COMPLETE, 1169 SEARCH_COUNT, 1170 SEARCH_REMOVE 1171 } ahc_search_action; 1172 int ahc_search_qinfifo(struct ahc_softc *ahc, int target, 1173 char channel, int lun, u_int tag, 1174 role_t role, uint32_t status, 1175 ahc_search_action action); 1176 int ahc_search_untagged_queues(struct ahc_softc *ahc, 1177 ahc_io_ctx_t ctx, 1178 int target, char channel, 1179 int lun, uint32_t status, 1180 ahc_search_action action); 1181 int ahc_search_disc_list(struct ahc_softc *ahc, int target, 1182 char channel, int lun, u_int tag, 1183 int stop_on_first, int remove, 1184 int save_state); 1185 int ahc_reset_channel(struct ahc_softc *ahc, char channel, 1186 int initiate_reset); 1187 1188 /*************************** Utility Functions ********************************/ 1189 void ahc_compile_devinfo(struct ahc_devinfo *devinfo, 1190 u_int our_id, u_int target, 1191 u_int lun, char channel, 1192 role_t role); 1193 /************************** Transfer Negotiation ******************************/ 1194 const struct ahc_syncrate* ahc_find_syncrate(struct ahc_softc *ahc, u_int *period, 1195 u_int *ppr_options, u_int maxsync); 1196 u_int ahc_find_period(struct ahc_softc *ahc, 1197 u_int scsirate, u_int maxsync); 1198 /* 1199 * Negotiation types. These are used to qualify if we should renegotiate 1200 * even if our goal and current transport parameters are identical. 1201 */ 1202 typedef enum { 1203 AHC_NEG_TO_GOAL, /* Renegotiate only if goal and curr differ. */ 1204 AHC_NEG_IF_NON_ASYNC, /* Renegotiate so long as goal is non-async. */ 1205 AHC_NEG_ALWAYS /* Renegotiat even if goal is async. */ 1206 } ahc_neg_type; 1207 int ahc_update_neg_request(struct ahc_softc*, 1208 struct ahc_devinfo*, 1209 struct ahc_tmode_tstate*, 1210 struct ahc_initiator_tinfo*, 1211 ahc_neg_type); 1212 void ahc_set_width(struct ahc_softc *ahc, 1213 struct ahc_devinfo *devinfo, 1214 u_int width, u_int type, int paused); 1215 void ahc_set_syncrate(struct ahc_softc *ahc, 1216 struct ahc_devinfo *devinfo, 1217 const struct ahc_syncrate *syncrate, 1218 u_int period, u_int offset, 1219 u_int ppr_options, 1220 u_int type, int paused); 1221 typedef enum { 1222 AHC_QUEUE_NONE, 1223 AHC_QUEUE_BASIC, 1224 AHC_QUEUE_TAGGED 1225 } ahc_queue_alg; 1226 1227 /**************************** Target Mode *************************************/ 1228 #ifdef AHC_TARGET_MODE 1229 void ahc_send_lstate_events(struct ahc_softc *, 1230 struct ahc_tmode_lstate *); 1231 void ahc_handle_en_lun(struct ahc_softc *ahc, 1232 struct cam_sim *sim, union ccb *ccb); 1233 cam_status ahc_find_tmode_devs(struct ahc_softc *ahc, 1234 struct cam_sim *sim, union ccb *ccb, 1235 struct ahc_tmode_tstate **tstate, 1236 struct ahc_tmode_lstate **lstate, 1237 int notfound_failure); 1238 #ifndef AHC_TMODE_ENABLE 1239 #define AHC_TMODE_ENABLE 0 1240 #endif 1241 #endif 1242 /******************************* Debug ***************************************/ 1243 #ifdef AHC_DEBUG 1244 extern uint32_t ahc_debug; 1245 #define AHC_SHOW_MISC 0x0001 1246 #define AHC_SHOW_SENSE 0x0002 1247 #define AHC_DUMP_SEEPROM 0x0004 1248 #define AHC_SHOW_TERMCTL 0x0008 1249 #define AHC_SHOW_MEMORY 0x0010 1250 #define AHC_SHOW_MESSAGES 0x0020 1251 #define AHC_SHOW_DV 0x0040 1252 #define AHC_SHOW_SELTO 0x0080 1253 #define AHC_SHOW_QFULL 0x0200 1254 #define AHC_SHOW_QUEUE 0x0400 1255 #define AHC_SHOW_TQIN 0x0800 1256 #define AHC_SHOW_MASKED_ERRORS 0x1000 1257 #define AHC_DEBUG_SEQUENCER 0x2000 1258 #endif 1259 void ahc_print_devinfo(struct ahc_softc *ahc, 1260 struct ahc_devinfo *dev); 1261 void ahc_dump_card_state(struct ahc_softc *ahc); 1262 int ahc_print_register(const ahc_reg_parse_entry_t *table, 1263 u_int num_entries, 1264 const char *name, 1265 u_int address, 1266 u_int value, 1267 u_int *cur_column, 1268 u_int wrap_point); 1269 /******************************* SEEPROM *************************************/ 1270 int ahc_acquire_seeprom(struct ahc_softc *ahc, 1271 struct seeprom_descriptor *sd); 1272 void ahc_release_seeprom(struct seeprom_descriptor *sd); 1273 #endif /* _AIC7XXX_H_ */ 1274