1 /*
2  * Adaptec AIC79xx device driver for Linux.
3  *
4  * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic79xx_osm.c#171 $
5  *
6  * --------------------------------------------------------------------------
7  * Copyright (c) 1994-2000 Justin T. Gibbs.
8  * Copyright (c) 1997-1999 Doug Ledford
9  * Copyright (c) 2000-2003 Adaptec Inc.
10  * All rights reserved.
11  *
12  * Redistribution and use in source and binary forms, with or without
13  * modification, are permitted provided that the following conditions
14  * are met:
15  * 1. Redistributions of source code must retain the above copyright
16  *    notice, this list of conditions, and the following disclaimer,
17  *    without modification.
18  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
19  *    substantially similar to the "NO WARRANTY" disclaimer below
20  *    ("Disclaimer") and any redistribution must be conditioned upon
21  *    including a substantially similar Disclaimer requirement for further
22  *    binary redistribution.
23  * 3. Neither the names of the above-listed copyright holders nor the names
24  *    of any contributors may be used to endorse or promote products derived
25  *    from this software without specific prior written permission.
26  *
27  * Alternatively, this software may be distributed under the terms of the
28  * GNU General Public License ("GPL") version 2 as published by the Free
29  * Software Foundation.
30  *
31  * NO WARRANTY
32  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
33  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
34  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
35  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
36  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
38  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
39  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
40  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
41  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
42  * POSSIBILITY OF SUCH DAMAGES.
43  */
44 
45 #include "aic79xx_osm.h"
46 #include "aic79xx_inline.h"
47 #include <scsi/scsicam.h>
48 
49 static struct scsi_transport_template *ahd_linux_transport_template = NULL;
50 
51 #include <linux/init.h>		/* __setup */
52 #include <linux/mm.h>		/* For fetching system memory size */
53 #include <linux/blkdev.h>		/* For block_size() */
54 #include <linux/delay.h>	/* For ssleep/msleep */
55 #include <linux/device.h>
56 
57 /*
58  * Bucket size for counting good commands in between bad ones.
59  */
60 #define AHD_LINUX_ERR_THRESH	1000
61 
62 /*
63  * Set this to the delay in seconds after SCSI bus reset.
64  * Note, we honor this only for the initial bus reset.
65  * The scsi error recovery code performs its own bus settle
66  * delay handling for error recovery actions.
67  */
68 #ifdef CONFIG_AIC79XX_RESET_DELAY_MS
69 #define AIC79XX_RESET_DELAY CONFIG_AIC79XX_RESET_DELAY_MS
70 #else
71 #define AIC79XX_RESET_DELAY 5000
72 #endif
73 
74 /*
75  * To change the default number of tagged transactions allowed per-device,
76  * add a line to the lilo.conf file like:
77  * append="aic79xx=verbose,tag_info:{{32,32,32,32},{32,32,32,32}}"
78  * which will result in the first four devices on the first two
79  * controllers being set to a tagged queue depth of 32.
80  *
81  * The tag_commands is an array of 16 to allow for wide and twin adapters.
82  * Twin adapters will use indexes 0-7 for channel 0, and indexes 8-15
83  * for channel 1.
84  */
85 typedef struct {
86 	uint16_t tag_commands[16];	/* Allow for wide/twin adapters. */
87 } adapter_tag_info_t;
88 
89 /*
90  * Modify this as you see fit for your system.
91  *
92  * 0			tagged queuing disabled
93  * 1 <= n <= 253	n == max tags ever dispatched.
94  *
95  * The driver will throttle the number of commands dispatched to a
96  * device if it returns queue full.  For devices with a fixed maximum
97  * queue depth, the driver will eventually determine this depth and
98  * lock it in (a console message is printed to indicate that a lock
99  * has occurred).  On some devices, queue full is returned for a temporary
100  * resource shortage.  These devices will return queue full at varying
101  * depths.  The driver will throttle back when the queue fulls occur and
102  * attempt to slowly increase the depth over time as the device recovers
103  * from the resource shortage.
104  *
105  * In this example, the first line will disable tagged queueing for all
106  * the devices on the first probed aic79xx adapter.
107  *
108  * The second line enables tagged queueing with 4 commands/LUN for IDs
109  * (0, 2-11, 13-15), disables tagged queueing for ID 12, and tells the
110  * driver to attempt to use up to 64 tags for ID 1.
111  *
112  * The third line is the same as the first line.
113  *
114  * The fourth line disables tagged queueing for devices 0 and 3.  It
115  * enables tagged queueing for the other IDs, with 16 commands/LUN
116  * for IDs 1 and 4, 127 commands/LUN for ID 8, and 4 commands/LUN for
117  * IDs 2, 5-7, and 9-15.
118  */
119 
120 /*
121  * NOTE: The below structure is for reference only, the actual structure
122  *       to modify in order to change things is just below this comment block.
123 adapter_tag_info_t aic79xx_tag_info[] =
124 {
125 	{{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}},
126 	{{4, 64, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 4, 4, 4}},
127 	{{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}},
128 	{{0, 16, 4, 0, 16, 4, 4, 4, 127, 4, 4, 4, 4, 4, 4, 4}}
129 };
130 */
131 
132 #ifdef CONFIG_AIC79XX_CMDS_PER_DEVICE
133 #define AIC79XX_CMDS_PER_DEVICE CONFIG_AIC79XX_CMDS_PER_DEVICE
134 #else
135 #define AIC79XX_CMDS_PER_DEVICE AHD_MAX_QUEUE
136 #endif
137 
138 #define AIC79XX_CONFIGED_TAG_COMMANDS {					\
139 	AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,		\
140 	AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,		\
141 	AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,		\
142 	AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,		\
143 	AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,		\
144 	AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,		\
145 	AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,		\
146 	AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE		\
147 }
148 
149 /*
150  * By default, use the number of commands specified by
151  * the users kernel configuration.
152  */
153 static adapter_tag_info_t aic79xx_tag_info[] =
154 {
155 	{AIC79XX_CONFIGED_TAG_COMMANDS},
156 	{AIC79XX_CONFIGED_TAG_COMMANDS},
157 	{AIC79XX_CONFIGED_TAG_COMMANDS},
158 	{AIC79XX_CONFIGED_TAG_COMMANDS},
159 	{AIC79XX_CONFIGED_TAG_COMMANDS},
160 	{AIC79XX_CONFIGED_TAG_COMMANDS},
161 	{AIC79XX_CONFIGED_TAG_COMMANDS},
162 	{AIC79XX_CONFIGED_TAG_COMMANDS},
163 	{AIC79XX_CONFIGED_TAG_COMMANDS},
164 	{AIC79XX_CONFIGED_TAG_COMMANDS},
165 	{AIC79XX_CONFIGED_TAG_COMMANDS},
166 	{AIC79XX_CONFIGED_TAG_COMMANDS},
167 	{AIC79XX_CONFIGED_TAG_COMMANDS},
168 	{AIC79XX_CONFIGED_TAG_COMMANDS},
169 	{AIC79XX_CONFIGED_TAG_COMMANDS},
170 	{AIC79XX_CONFIGED_TAG_COMMANDS}
171 };
172 
173 /*
174  * The I/O cell on the chip is very configurable in respect to its analog
175  * characteristics.  Set the defaults here; they can be overriden with
176  * the proper insmod parameters.
177  */
178 struct ahd_linux_iocell_opts
179 {
180 	uint8_t	precomp;
181 	uint8_t	slewrate;
182 	uint8_t amplitude;
183 };
184 #define AIC79XX_DEFAULT_PRECOMP		0xFF
185 #define AIC79XX_DEFAULT_SLEWRATE	0xFF
186 #define AIC79XX_DEFAULT_AMPLITUDE	0xFF
187 #define AIC79XX_DEFAULT_IOOPTS			\
188 {						\
189 	AIC79XX_DEFAULT_PRECOMP,		\
190 	AIC79XX_DEFAULT_SLEWRATE,		\
191 	AIC79XX_DEFAULT_AMPLITUDE		\
192 }
193 #define AIC79XX_PRECOMP_INDEX	0
194 #define AIC79XX_SLEWRATE_INDEX	1
195 #define AIC79XX_AMPLITUDE_INDEX	2
196 static const struct ahd_linux_iocell_opts aic79xx_iocell_info[] =
197 {
198 	AIC79XX_DEFAULT_IOOPTS,
199 	AIC79XX_DEFAULT_IOOPTS,
200 	AIC79XX_DEFAULT_IOOPTS,
201 	AIC79XX_DEFAULT_IOOPTS,
202 	AIC79XX_DEFAULT_IOOPTS,
203 	AIC79XX_DEFAULT_IOOPTS,
204 	AIC79XX_DEFAULT_IOOPTS,
205 	AIC79XX_DEFAULT_IOOPTS,
206 	AIC79XX_DEFAULT_IOOPTS,
207 	AIC79XX_DEFAULT_IOOPTS,
208 	AIC79XX_DEFAULT_IOOPTS,
209 	AIC79XX_DEFAULT_IOOPTS,
210 	AIC79XX_DEFAULT_IOOPTS,
211 	AIC79XX_DEFAULT_IOOPTS,
212 	AIC79XX_DEFAULT_IOOPTS,
213 	AIC79XX_DEFAULT_IOOPTS
214 };
215 
216 /*
217  * There should be a specific return value for this in scsi.h, but
218  * it seems that most drivers ignore it.
219  */
220 #define DID_UNDERFLOW   DID_ERROR
221 
222 void
223 ahd_print_path(struct ahd_softc *ahd, struct scb *scb)
224 {
225 	printk("(scsi%d:%c:%d:%d): ",
226 	       ahd->platform_data->host->host_no,
227 	       scb != NULL ? SCB_GET_CHANNEL(ahd, scb) : 'X',
228 	       scb != NULL ? SCB_GET_TARGET(ahd, scb) : -1,
229 	       scb != NULL ? SCB_GET_LUN(scb) : -1);
230 }
231 
232 /*
233  * XXX - these options apply unilaterally to _all_ adapters
234  *       cards in the system.  This should be fixed.  Exceptions to this
235  *       rule are noted in the comments.
236  */
237 
238 /*
239  * Skip the scsi bus reset.  Non 0 make us skip the reset at startup.  This
240  * has no effect on any later resets that might occur due to things like
241  * SCSI bus timeouts.
242  */
243 static uint32_t aic79xx_no_reset;
244 
245 /*
246  * Should we force EXTENDED translation on a controller.
247  *     0 == Use whatever is in the SEEPROM or default to off
248  *     1 == Use whatever is in the SEEPROM or default to on
249  */
250 static uint32_t aic79xx_extended;
251 
252 /*
253  * PCI bus parity checking of the Adaptec controllers.  This is somewhat
254  * dubious at best.  To my knowledge, this option has never actually
255  * solved a PCI parity problem, but on certain machines with broken PCI
256  * chipset configurations, it can generate tons of false error messages.
257  * It's included in the driver for completeness.
258  *   0	   = Shut off PCI parity check
259  *   non-0 = Enable PCI parity check
260  *
261  * NOTE: you can't actually pass -1 on the lilo prompt.  So, to set this
262  * variable to -1 you would actually want to simply pass the variable
263  * name without a number.  That will invert the 0 which will result in
264  * -1.
265  */
266 static uint32_t aic79xx_pci_parity = ~0;
267 
268 /*
269  * There are lots of broken chipsets in the world.  Some of them will
270  * violate the PCI spec when we issue byte sized memory writes to our
271  * controller.  I/O mapped register access, if allowed by the given
272  * platform, will work in almost all cases.
273  */
274 uint32_t aic79xx_allow_memio = ~0;
275 
276 /*
277  * So that we can set how long each device is given as a selection timeout.
278  * The table of values goes like this:
279  *   0 - 256ms
280  *   1 - 128ms
281  *   2 - 64ms
282  *   3 - 32ms
283  * We default to 256ms because some older devices need a longer time
284  * to respond to initial selection.
285  */
286 static uint32_t aic79xx_seltime;
287 
288 /*
289  * Certain devices do not perform any aging on commands.  Should the
290  * device be saturated by commands in one portion of the disk, it is
291  * possible for transactions on far away sectors to never be serviced.
292  * To handle these devices, we can periodically send an ordered tag to
293  * force all outstanding transactions to be serviced prior to a new
294  * transaction.
295  */
296 static uint32_t aic79xx_periodic_otag;
297 
298 /* Some storage boxes are using an LSI chip which has a bug making it
299  * impossible to use aic79xx Rev B chip in 320 speeds.  The following
300  * storage boxes have been reported to be buggy:
301  * EonStor 3U 16-Bay: U16U-G3A3
302  * EonStor 2U 12-Bay: U12U-G3A3
303  * SentinelRAID: 2500F R5 / R6
304  * SentinelRAID: 2500F R1
305  * SentinelRAID: 2500F/1500F
306  * SentinelRAID: 150F
307  *
308  * To get around this LSI bug, you can set your board to 160 mode
309  * or you can enable the SLOWCRC bit.
310  */
311 uint32_t aic79xx_slowcrc;
312 
313 /*
314  * Module information and settable options.
315  */
316 static char *aic79xx = NULL;
317 
318 MODULE_AUTHOR("Maintainer: Hannes Reinecke <hare@suse.de>");
319 MODULE_DESCRIPTION("Adaptec AIC790X U320 SCSI Host Bus Adapter driver");
320 MODULE_LICENSE("Dual BSD/GPL");
321 MODULE_VERSION(AIC79XX_DRIVER_VERSION);
322 module_param(aic79xx, charp, 0444);
323 MODULE_PARM_DESC(aic79xx,
324 "period-delimited options string:\n"
325 "	verbose			Enable verbose/diagnostic logging\n"
326 "	allow_memio		Allow device registers to be memory mapped\n"
327 "	debug			Bitmask of debug values to enable\n"
328 "	no_reset		Suppress initial bus resets\n"
329 "	extended		Enable extended geometry on all controllers\n"
330 "	periodic_otag		Send an ordered tagged transaction\n"
331 "				periodically to prevent tag starvation.\n"
332 "				This may be required by some older disk\n"
333 "				or drives/RAID arrays.\n"
334 "	tag_info:<tag_str>	Set per-target tag depth\n"
335 "	global_tag_depth:<int>	Global tag depth for all targets on all buses\n"
336 "	slewrate:<slewrate_list>Set the signal slew rate (0-15).\n"
337 "	precomp:<pcomp_list>	Set the signal precompensation (0-7).\n"
338 "	amplitude:<int>		Set the signal amplitude (0-7).\n"
339 "	seltime:<int>		Selection Timeout:\n"
340 "				(0/256ms,1/128ms,2/64ms,3/32ms)\n"
341 "	slowcrc			Turn on the SLOWCRC bit (Rev B only)\n"
342 "\n"
343 "	Sample /etc/modprobe.conf line:\n"
344 "		Enable verbose logging\n"
345 "		Set tag depth on Controller 2/Target 2 to 10 tags\n"
346 "		Shorten the selection timeout to 128ms\n"
347 "\n"
348 "	options aic79xx 'aic79xx=verbose.tag_info:{{}.{}.{..10}}.seltime:1'\n"
349 );
350 
351 static void ahd_linux_handle_scsi_status(struct ahd_softc *,
352 					 struct scsi_device *,
353 					 struct scb *);
354 static void ahd_linux_queue_cmd_complete(struct ahd_softc *ahd,
355 					 struct scsi_cmnd *cmd);
356 static int ahd_linux_queue_abort_cmd(struct scsi_cmnd *cmd);
357 static void ahd_linux_initialize_scsi_bus(struct ahd_softc *ahd);
358 static u_int ahd_linux_user_tagdepth(struct ahd_softc *ahd,
359 				     struct ahd_devinfo *devinfo);
360 static void ahd_linux_device_queue_depth(struct scsi_device *);
361 static int ahd_linux_run_command(struct ahd_softc*,
362 				 struct ahd_linux_device *,
363 				 struct scsi_cmnd *);
364 static void ahd_linux_setup_tag_info_global(char *p);
365 static int  aic79xx_setup(char *c);
366 static void ahd_freeze_simq(struct ahd_softc *ahd);
367 static void ahd_release_simq(struct ahd_softc *ahd);
368 
369 static int ahd_linux_unit;
370 
371 
372 /************************** OS Utility Wrappers *******************************/
373 void ahd_delay(long);
374 void
375 ahd_delay(long usec)
376 {
377 	/*
378 	 * udelay on Linux can have problems for
379 	 * multi-millisecond waits.  Wait at most
380 	 * 1024us per call.
381 	 */
382 	while (usec > 0) {
383 		udelay(usec % 1024);
384 		usec -= 1024;
385 	}
386 }
387 
388 
389 /***************************** Low Level I/O **********************************/
390 uint8_t ahd_inb(struct ahd_softc * ahd, long port);
391 void ahd_outb(struct ahd_softc * ahd, long port, uint8_t val);
392 void ahd_outw_atomic(struct ahd_softc * ahd,
393 				     long port, uint16_t val);
394 void ahd_outsb(struct ahd_softc * ahd, long port,
395 			       uint8_t *, int count);
396 void ahd_insb(struct ahd_softc * ahd, long port,
397 			       uint8_t *, int count);
398 
399 uint8_t
400 ahd_inb(struct ahd_softc * ahd, long port)
401 {
402 	uint8_t x;
403 
404 	if (ahd->tags[0] == BUS_SPACE_MEMIO) {
405 		x = readb(ahd->bshs[0].maddr + port);
406 	} else {
407 		x = inb(ahd->bshs[(port) >> 8].ioport + ((port) & 0xFF));
408 	}
409 	mb();
410 	return (x);
411 }
412 
413 #if 0 /* unused */
414 static uint16_t
415 ahd_inw_atomic(struct ahd_softc * ahd, long port)
416 {
417 	uint8_t x;
418 
419 	if (ahd->tags[0] == BUS_SPACE_MEMIO) {
420 		x = readw(ahd->bshs[0].maddr + port);
421 	} else {
422 		x = inw(ahd->bshs[(port) >> 8].ioport + ((port) & 0xFF));
423 	}
424 	mb();
425 	return (x);
426 }
427 #endif
428 
429 void
430 ahd_outb(struct ahd_softc * ahd, long port, uint8_t val)
431 {
432 	if (ahd->tags[0] == BUS_SPACE_MEMIO) {
433 		writeb(val, ahd->bshs[0].maddr + port);
434 	} else {
435 		outb(val, ahd->bshs[(port) >> 8].ioport + (port & 0xFF));
436 	}
437 	mb();
438 }
439 
440 void
441 ahd_outw_atomic(struct ahd_softc * ahd, long port, uint16_t val)
442 {
443 	if (ahd->tags[0] == BUS_SPACE_MEMIO) {
444 		writew(val, ahd->bshs[0].maddr + port);
445 	} else {
446 		outw(val, ahd->bshs[(port) >> 8].ioport + (port & 0xFF));
447 	}
448 	mb();
449 }
450 
451 void
452 ahd_outsb(struct ahd_softc * ahd, long port, uint8_t *array, int count)
453 {
454 	int i;
455 
456 	/*
457 	 * There is probably a more efficient way to do this on Linux
458 	 * but we don't use this for anything speed critical and this
459 	 * should work.
460 	 */
461 	for (i = 0; i < count; i++)
462 		ahd_outb(ahd, port, *array++);
463 }
464 
465 void
466 ahd_insb(struct ahd_softc * ahd, long port, uint8_t *array, int count)
467 {
468 	int i;
469 
470 	/*
471 	 * There is probably a more efficient way to do this on Linux
472 	 * but we don't use this for anything speed critical and this
473 	 * should work.
474 	 */
475 	for (i = 0; i < count; i++)
476 		*array++ = ahd_inb(ahd, port);
477 }
478 
479 /******************************* PCI Routines *********************************/
480 uint32_t
481 ahd_pci_read_config(ahd_dev_softc_t pci, int reg, int width)
482 {
483 	switch (width) {
484 	case 1:
485 	{
486 		uint8_t retval;
487 
488 		pci_read_config_byte(pci, reg, &retval);
489 		return (retval);
490 	}
491 	case 2:
492 	{
493 		uint16_t retval;
494 		pci_read_config_word(pci, reg, &retval);
495 		return (retval);
496 	}
497 	case 4:
498 	{
499 		uint32_t retval;
500 		pci_read_config_dword(pci, reg, &retval);
501 		return (retval);
502 	}
503 	default:
504 		panic("ahd_pci_read_config: Read size too big");
505 		/* NOTREACHED */
506 		return (0);
507 	}
508 }
509 
510 void
511 ahd_pci_write_config(ahd_dev_softc_t pci, int reg, uint32_t value, int width)
512 {
513 	switch (width) {
514 	case 1:
515 		pci_write_config_byte(pci, reg, value);
516 		break;
517 	case 2:
518 		pci_write_config_word(pci, reg, value);
519 		break;
520 	case 4:
521 		pci_write_config_dword(pci, reg, value);
522 		break;
523 	default:
524 		panic("ahd_pci_write_config: Write size too big");
525 		/* NOTREACHED */
526 	}
527 }
528 
529 /****************************** Inlines ***************************************/
530 static void ahd_linux_unmap_scb(struct ahd_softc*, struct scb*);
531 
532 static void
533 ahd_linux_unmap_scb(struct ahd_softc *ahd, struct scb *scb)
534 {
535 	struct scsi_cmnd *cmd;
536 
537 	cmd = scb->io_ctx;
538 	ahd_sync_sglist(ahd, scb, BUS_DMASYNC_POSTWRITE);
539 	scsi_dma_unmap(cmd);
540 }
541 
542 /******************************** Macros **************************************/
543 #define BUILD_SCSIID(ahd, cmd)						\
544 	(((scmd_id(cmd) << TID_SHIFT) & TID) | (ahd)->our_id)
545 
546 /*
547  * Return a string describing the driver.
548  */
549 static const char *
550 ahd_linux_info(struct Scsi_Host *host)
551 {
552 	static char buffer[512];
553 	char	ahd_info[256];
554 	char   *bp;
555 	struct ahd_softc *ahd;
556 
557 	bp = &buffer[0];
558 	ahd = *(struct ahd_softc **)host->hostdata;
559 	memset(bp, 0, sizeof(buffer));
560 	strcpy(bp, "Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev " AIC79XX_DRIVER_VERSION "\n"
561 			"        <");
562 	strcat(bp, ahd->description);
563 	strcat(bp, ">\n"
564 			"        ");
565 	ahd_controller_info(ahd, ahd_info);
566 	strcat(bp, ahd_info);
567 
568 	return (bp);
569 }
570 
571 /*
572  * Queue an SCB to the controller.
573  */
574 static int
575 ahd_linux_queue(struct scsi_cmnd * cmd, void (*scsi_done) (struct scsi_cmnd *))
576 {
577 	struct	 ahd_softc *ahd;
578 	struct	 ahd_linux_device *dev = scsi_transport_device_data(cmd->device);
579 	int rtn = SCSI_MLQUEUE_HOST_BUSY;
580 
581 	ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
582 
583 	cmd->scsi_done = scsi_done;
584 	cmd->result = CAM_REQ_INPROG << 16;
585 	rtn = ahd_linux_run_command(ahd, dev, cmd);
586 
587 	return rtn;
588 }
589 
590 static struct scsi_target **
591 ahd_linux_target_in_softc(struct scsi_target *starget)
592 {
593 	struct	ahd_softc *ahd =
594 		*((struct ahd_softc **)dev_to_shost(&starget->dev)->hostdata);
595 	unsigned int target_offset;
596 
597 	target_offset = starget->id;
598 	if (starget->channel != 0)
599 		target_offset += 8;
600 
601 	return &ahd->platform_data->starget[target_offset];
602 }
603 
604 static int
605 ahd_linux_target_alloc(struct scsi_target *starget)
606 {
607 	struct	ahd_softc *ahd =
608 		*((struct ahd_softc **)dev_to_shost(&starget->dev)->hostdata);
609 	struct seeprom_config *sc = ahd->seep_config;
610 	unsigned long flags;
611 	struct scsi_target **ahd_targp = ahd_linux_target_in_softc(starget);
612 	struct ahd_devinfo devinfo;
613 	struct ahd_initiator_tinfo *tinfo;
614 	struct ahd_tmode_tstate *tstate;
615 	char channel = starget->channel + 'A';
616 
617 	ahd_lock(ahd, &flags);
618 
619 	BUG_ON(*ahd_targp != NULL);
620 
621 	*ahd_targp = starget;
622 
623 	if (sc) {
624 		int flags = sc->device_flags[starget->id];
625 
626 		tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
627 					    starget->id, &tstate);
628 
629 		if ((flags  & CFPACKETIZED) == 0) {
630 			/* don't negotiate packetized (IU) transfers */
631 			spi_max_iu(starget) = 0;
632 		} else {
633 			if ((ahd->features & AHD_RTI) == 0)
634 				spi_rti(starget) = 0;
635 		}
636 
637 		if ((flags & CFQAS) == 0)
638 			spi_max_qas(starget) = 0;
639 
640 		/* Transinfo values have been set to BIOS settings */
641 		spi_max_width(starget) = (flags & CFWIDEB) ? 1 : 0;
642 		spi_min_period(starget) = tinfo->user.period;
643 		spi_max_offset(starget) = tinfo->user.offset;
644 	}
645 
646 	tinfo = ahd_fetch_transinfo(ahd, channel, ahd->our_id,
647 				    starget->id, &tstate);
648 	ahd_compile_devinfo(&devinfo, ahd->our_id, starget->id,
649 			    CAM_LUN_WILDCARD, channel,
650 			    ROLE_INITIATOR);
651 	ahd_set_syncrate(ahd, &devinfo, 0, 0, 0,
652 			 AHD_TRANS_GOAL, /*paused*/FALSE);
653 	ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
654 		      AHD_TRANS_GOAL, /*paused*/FALSE);
655 	ahd_unlock(ahd, &flags);
656 
657 	return 0;
658 }
659 
660 static void
661 ahd_linux_target_destroy(struct scsi_target *starget)
662 {
663 	struct scsi_target **ahd_targp = ahd_linux_target_in_softc(starget);
664 
665 	*ahd_targp = NULL;
666 }
667 
668 static int
669 ahd_linux_slave_alloc(struct scsi_device *sdev)
670 {
671 	struct	ahd_softc *ahd =
672 		*((struct ahd_softc **)sdev->host->hostdata);
673 	struct ahd_linux_device *dev;
674 
675 	if (bootverbose)
676 		printf("%s: Slave Alloc %d\n", ahd_name(ahd), sdev->id);
677 
678 	dev = scsi_transport_device_data(sdev);
679 	memset(dev, 0, sizeof(*dev));
680 
681 	/*
682 	 * We start out life using untagged
683 	 * transactions of which we allow one.
684 	 */
685 	dev->openings = 1;
686 
687 	/*
688 	 * Set maxtags to 0.  This will be changed if we
689 	 * later determine that we are dealing with
690 	 * a tagged queuing capable device.
691 	 */
692 	dev->maxtags = 0;
693 
694 	return (0);
695 }
696 
697 static int
698 ahd_linux_slave_configure(struct scsi_device *sdev)
699 {
700 	struct	ahd_softc *ahd;
701 
702 	ahd = *((struct ahd_softc **)sdev->host->hostdata);
703 	if (bootverbose)
704 		sdev_printk(KERN_INFO, sdev, "Slave Configure\n");
705 
706 	ahd_linux_device_queue_depth(sdev);
707 
708 	/* Initial Domain Validation */
709 	if (!spi_initial_dv(sdev->sdev_target))
710 		spi_dv_device(sdev);
711 
712 	return 0;
713 }
714 
715 #if defined(__i386__)
716 /*
717  * Return the disk geometry for the given SCSI device.
718  */
719 static int
720 ahd_linux_biosparam(struct scsi_device *sdev, struct block_device *bdev,
721 		    sector_t capacity, int geom[])
722 {
723 	uint8_t *bh;
724 	int	 heads;
725 	int	 sectors;
726 	int	 cylinders;
727 	int	 ret;
728 	int	 extended;
729 	struct	 ahd_softc *ahd;
730 
731 	ahd = *((struct ahd_softc **)sdev->host->hostdata);
732 
733 	bh = scsi_bios_ptable(bdev);
734 	if (bh) {
735 		ret = scsi_partsize(bh, capacity,
736 				    &geom[2], &geom[0], &geom[1]);
737 		kfree(bh);
738 		if (ret != -1)
739 			return (ret);
740 	}
741 	heads = 64;
742 	sectors = 32;
743 	cylinders = aic_sector_div(capacity, heads, sectors);
744 
745 	if (aic79xx_extended != 0)
746 		extended = 1;
747 	else
748 		extended = (ahd->flags & AHD_EXTENDED_TRANS_A) != 0;
749 	if (extended && cylinders >= 1024) {
750 		heads = 255;
751 		sectors = 63;
752 		cylinders = aic_sector_div(capacity, heads, sectors);
753 	}
754 	geom[0] = heads;
755 	geom[1] = sectors;
756 	geom[2] = cylinders;
757 	return (0);
758 }
759 #endif
760 
761 /*
762  * Abort the current SCSI command(s).
763  */
764 static int
765 ahd_linux_abort(struct scsi_cmnd *cmd)
766 {
767 	int error;
768 
769 	error = ahd_linux_queue_abort_cmd(cmd);
770 
771 	return error;
772 }
773 
774 /*
775  * Attempt to send a target reset message to the device that timed out.
776  */
777 static int
778 ahd_linux_dev_reset(struct scsi_cmnd *cmd)
779 {
780 	struct ahd_softc *ahd;
781 	struct ahd_linux_device *dev;
782 	struct scb *reset_scb;
783 	u_int  cdb_byte;
784 	int    retval = SUCCESS;
785 	int    paused;
786 	int    wait;
787 	struct	ahd_initiator_tinfo *tinfo;
788 	struct	ahd_tmode_tstate *tstate;
789 	unsigned long flags;
790 	DECLARE_COMPLETION_ONSTACK(done);
791 
792 	reset_scb = NULL;
793 	paused = FALSE;
794 	wait = FALSE;
795 	ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
796 
797 	scmd_printk(KERN_INFO, cmd,
798 		    "Attempting to queue a TARGET RESET message:");
799 
800 	printf("CDB:");
801 	for (cdb_byte = 0; cdb_byte < cmd->cmd_len; cdb_byte++)
802 		printf(" 0x%x", cmd->cmnd[cdb_byte]);
803 	printf("\n");
804 
805 	/*
806 	 * Determine if we currently own this command.
807 	 */
808 	dev = scsi_transport_device_data(cmd->device);
809 
810 	if (dev == NULL) {
811 		/*
812 		 * No target device for this command exists,
813 		 * so we must not still own the command.
814 		 */
815 		scmd_printk(KERN_INFO, cmd, "Is not an active device\n");
816 		return SUCCESS;
817 	}
818 
819 	/*
820 	 * Generate us a new SCB
821 	 */
822 	reset_scb = ahd_get_scb(ahd, AHD_NEVER_COL_IDX);
823 	if (!reset_scb) {
824 		scmd_printk(KERN_INFO, cmd, "No SCB available\n");
825 		return FAILED;
826 	}
827 
828 	tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
829 				    cmd->device->id, &tstate);
830 	reset_scb->io_ctx = cmd;
831 	reset_scb->platform_data->dev = dev;
832 	reset_scb->sg_count = 0;
833 	ahd_set_residual(reset_scb, 0);
834 	ahd_set_sense_residual(reset_scb, 0);
835 	reset_scb->platform_data->xfer_len = 0;
836 	reset_scb->hscb->control = 0;
837 	reset_scb->hscb->scsiid = BUILD_SCSIID(ahd,cmd);
838 	reset_scb->hscb->lun = cmd->device->lun;
839 	reset_scb->hscb->cdb_len = 0;
840 	reset_scb->hscb->task_management = SIU_TASKMGMT_LUN_RESET;
841 	reset_scb->flags |= SCB_DEVICE_RESET|SCB_RECOVERY_SCB|SCB_ACTIVE;
842 	if ((tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0) {
843 		reset_scb->flags |= SCB_PACKETIZED;
844 	} else {
845 		reset_scb->hscb->control |= MK_MESSAGE;
846 	}
847 	dev->openings--;
848 	dev->active++;
849 	dev->commands_issued++;
850 
851 	ahd_lock(ahd, &flags);
852 
853 	LIST_INSERT_HEAD(&ahd->pending_scbs, reset_scb, pending_links);
854 	ahd_queue_scb(ahd, reset_scb);
855 
856 	ahd->platform_data->eh_done = &done;
857 	ahd_unlock(ahd, &flags);
858 
859 	printf("%s: Device reset code sleeping\n", ahd_name(ahd));
860 	if (!wait_for_completion_timeout(&done, 5 * HZ)) {
861 		ahd_lock(ahd, &flags);
862 		ahd->platform_data->eh_done = NULL;
863 		ahd_unlock(ahd, &flags);
864 		printf("%s: Device reset timer expired (active %d)\n",
865 		       ahd_name(ahd), dev->active);
866 		retval = FAILED;
867 	}
868 	printf("%s: Device reset returning 0x%x\n", ahd_name(ahd), retval);
869 
870 	return (retval);
871 }
872 
873 /*
874  * Reset the SCSI bus.
875  */
876 static int
877 ahd_linux_bus_reset(struct scsi_cmnd *cmd)
878 {
879 	struct ahd_softc *ahd;
880 	int    found;
881 	unsigned long flags;
882 
883 	ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
884 #ifdef AHD_DEBUG
885 	if ((ahd_debug & AHD_SHOW_RECOVERY) != 0)
886 		printf("%s: Bus reset called for cmd %p\n",
887 		       ahd_name(ahd), cmd);
888 #endif
889 	ahd_lock(ahd, &flags);
890 
891 	found = ahd_reset_channel(ahd, scmd_channel(cmd) + 'A',
892 				  /*initiate reset*/TRUE);
893 	ahd_unlock(ahd, &flags);
894 
895 	if (bootverbose)
896 		printf("%s: SCSI bus reset delivered. "
897 		       "%d SCBs aborted.\n", ahd_name(ahd), found);
898 
899 	return (SUCCESS);
900 }
901 
902 struct scsi_host_template aic79xx_driver_template = {
903 	.module			= THIS_MODULE,
904 	.name			= "aic79xx",
905 	.proc_name		= "aic79xx",
906 	.proc_info		= ahd_linux_proc_info,
907 	.info			= ahd_linux_info,
908 	.queuecommand		= ahd_linux_queue,
909 	.eh_abort_handler	= ahd_linux_abort,
910 	.eh_device_reset_handler = ahd_linux_dev_reset,
911 	.eh_bus_reset_handler	= ahd_linux_bus_reset,
912 #if defined(__i386__)
913 	.bios_param		= ahd_linux_biosparam,
914 #endif
915 	.can_queue		= AHD_MAX_QUEUE,
916 	.this_id		= -1,
917 	.max_sectors		= 8192,
918 	.cmd_per_lun		= 2,
919 	.use_clustering		= ENABLE_CLUSTERING,
920 	.slave_alloc		= ahd_linux_slave_alloc,
921 	.slave_configure	= ahd_linux_slave_configure,
922 	.target_alloc		= ahd_linux_target_alloc,
923 	.target_destroy		= ahd_linux_target_destroy,
924 };
925 
926 /******************************** Bus DMA *************************************/
927 int
928 ahd_dma_tag_create(struct ahd_softc *ahd, bus_dma_tag_t parent,
929 		   bus_size_t alignment, bus_size_t boundary,
930 		   dma_addr_t lowaddr, dma_addr_t highaddr,
931 		   bus_dma_filter_t *filter, void *filterarg,
932 		   bus_size_t maxsize, int nsegments,
933 		   bus_size_t maxsegsz, int flags, bus_dma_tag_t *ret_tag)
934 {
935 	bus_dma_tag_t dmat;
936 
937 	dmat = malloc(sizeof(*dmat), M_DEVBUF, M_NOWAIT);
938 	if (dmat == NULL)
939 		return (ENOMEM);
940 
941 	/*
942 	 * Linux is very simplistic about DMA memory.  For now don't
943 	 * maintain all specification information.  Once Linux supplies
944 	 * better facilities for doing these operations, or the
945 	 * needs of this particular driver change, we might need to do
946 	 * more here.
947 	 */
948 	dmat->alignment = alignment;
949 	dmat->boundary = boundary;
950 	dmat->maxsize = maxsize;
951 	*ret_tag = dmat;
952 	return (0);
953 }
954 
955 void
956 ahd_dma_tag_destroy(struct ahd_softc *ahd, bus_dma_tag_t dmat)
957 {
958 	free(dmat, M_DEVBUF);
959 }
960 
961 int
962 ahd_dmamem_alloc(struct ahd_softc *ahd, bus_dma_tag_t dmat, void** vaddr,
963 		 int flags, bus_dmamap_t *mapp)
964 {
965 	*vaddr = pci_alloc_consistent(ahd->dev_softc,
966 				      dmat->maxsize, mapp);
967 	if (*vaddr == NULL)
968 		return (ENOMEM);
969 	return(0);
970 }
971 
972 void
973 ahd_dmamem_free(struct ahd_softc *ahd, bus_dma_tag_t dmat,
974 		void* vaddr, bus_dmamap_t map)
975 {
976 	pci_free_consistent(ahd->dev_softc, dmat->maxsize,
977 			    vaddr, map);
978 }
979 
980 int
981 ahd_dmamap_load(struct ahd_softc *ahd, bus_dma_tag_t dmat, bus_dmamap_t map,
982 		void *buf, bus_size_t buflen, bus_dmamap_callback_t *cb,
983 		void *cb_arg, int flags)
984 {
985 	/*
986 	 * Assume for now that this will only be used during
987 	 * initialization and not for per-transaction buffer mapping.
988 	 */
989 	bus_dma_segment_t stack_sg;
990 
991 	stack_sg.ds_addr = map;
992 	stack_sg.ds_len = dmat->maxsize;
993 	cb(cb_arg, &stack_sg, /*nseg*/1, /*error*/0);
994 	return (0);
995 }
996 
997 void
998 ahd_dmamap_destroy(struct ahd_softc *ahd, bus_dma_tag_t dmat, bus_dmamap_t map)
999 {
1000 }
1001 
1002 int
1003 ahd_dmamap_unload(struct ahd_softc *ahd, bus_dma_tag_t dmat, bus_dmamap_t map)
1004 {
1005 	/* Nothing to do */
1006 	return (0);
1007 }
1008 
1009 /********************* Platform Dependent Functions ***************************/
1010 static void
1011 ahd_linux_setup_iocell_info(u_long index, int instance, int targ, int32_t value)
1012 {
1013 
1014 	if ((instance >= 0)
1015 	 && (instance < ARRAY_SIZE(aic79xx_iocell_info))) {
1016 		uint8_t *iocell_info;
1017 
1018 		iocell_info = (uint8_t*)&aic79xx_iocell_info[instance];
1019 		iocell_info[index] = value & 0xFFFF;
1020 		if (bootverbose)
1021 			printf("iocell[%d:%ld] = %d\n", instance, index, value);
1022 	}
1023 }
1024 
1025 static void
1026 ahd_linux_setup_tag_info_global(char *p)
1027 {
1028 	int tags, i, j;
1029 
1030 	tags = simple_strtoul(p + 1, NULL, 0) & 0xff;
1031 	printf("Setting Global Tags= %d\n", tags);
1032 
1033 	for (i = 0; i < ARRAY_SIZE(aic79xx_tag_info); i++) {
1034 		for (j = 0; j < AHD_NUM_TARGETS; j++) {
1035 			aic79xx_tag_info[i].tag_commands[j] = tags;
1036 		}
1037 	}
1038 }
1039 
1040 static void
1041 ahd_linux_setup_tag_info(u_long arg, int instance, int targ, int32_t value)
1042 {
1043 
1044 	if ((instance >= 0) && (targ >= 0)
1045 	 && (instance < ARRAY_SIZE(aic79xx_tag_info))
1046 	 && (targ < AHD_NUM_TARGETS)) {
1047 		aic79xx_tag_info[instance].tag_commands[targ] = value & 0x1FF;
1048 		if (bootverbose)
1049 			printf("tag_info[%d:%d] = %d\n", instance, targ, value);
1050 	}
1051 }
1052 
1053 static char *
1054 ahd_parse_brace_option(char *opt_name, char *opt_arg, char *end, int depth,
1055 		       void (*callback)(u_long, int, int, int32_t),
1056 		       u_long callback_arg)
1057 {
1058 	char	*tok_end;
1059 	char	*tok_end2;
1060 	int      i;
1061 	int      instance;
1062 	int	 targ;
1063 	int	 done;
1064 	char	 tok_list[] = {'.', ',', '{', '}', '\0'};
1065 
1066 	/* All options use a ':' name/arg separator */
1067 	if (*opt_arg != ':')
1068 		return (opt_arg);
1069 	opt_arg++;
1070 	instance = -1;
1071 	targ = -1;
1072 	done = FALSE;
1073 	/*
1074 	 * Restore separator that may be in
1075 	 * the middle of our option argument.
1076 	 */
1077 	tok_end = strchr(opt_arg, '\0');
1078 	if (tok_end < end)
1079 		*tok_end = ',';
1080 	while (!done) {
1081 		switch (*opt_arg) {
1082 		case '{':
1083 			if (instance == -1) {
1084 				instance = 0;
1085 			} else {
1086 				if (depth > 1) {
1087 					if (targ == -1)
1088 						targ = 0;
1089 				} else {
1090 					printf("Malformed Option %s\n",
1091 					       opt_name);
1092 					done = TRUE;
1093 				}
1094 			}
1095 			opt_arg++;
1096 			break;
1097 		case '}':
1098 			if (targ != -1)
1099 				targ = -1;
1100 			else if (instance != -1)
1101 				instance = -1;
1102 			opt_arg++;
1103 			break;
1104 		case ',':
1105 		case '.':
1106 			if (instance == -1)
1107 				done = TRUE;
1108 			else if (targ >= 0)
1109 				targ++;
1110 			else if (instance >= 0)
1111 				instance++;
1112 			opt_arg++;
1113 			break;
1114 		case '\0':
1115 			done = TRUE;
1116 			break;
1117 		default:
1118 			tok_end = end;
1119 			for (i = 0; tok_list[i]; i++) {
1120 				tok_end2 = strchr(opt_arg, tok_list[i]);
1121 				if ((tok_end2) && (tok_end2 < tok_end))
1122 					tok_end = tok_end2;
1123 			}
1124 			callback(callback_arg, instance, targ,
1125 				 simple_strtol(opt_arg, NULL, 0));
1126 			opt_arg = tok_end;
1127 			break;
1128 		}
1129 	}
1130 	return (opt_arg);
1131 }
1132 
1133 /*
1134  * Handle Linux boot parameters. This routine allows for assigning a value
1135  * to a parameter with a ':' between the parameter and the value.
1136  * ie. aic79xx=stpwlev:1,extended
1137  */
1138 static int
1139 aic79xx_setup(char *s)
1140 {
1141 	int	i, n;
1142 	char   *p;
1143 	char   *end;
1144 
1145 	static const struct {
1146 		const char *name;
1147 		uint32_t *flag;
1148 	} options[] = {
1149 		{ "extended", &aic79xx_extended },
1150 		{ "no_reset", &aic79xx_no_reset },
1151 		{ "verbose", &aic79xx_verbose },
1152 		{ "allow_memio", &aic79xx_allow_memio},
1153 #ifdef AHD_DEBUG
1154 		{ "debug", &ahd_debug },
1155 #endif
1156 		{ "periodic_otag", &aic79xx_periodic_otag },
1157 		{ "pci_parity", &aic79xx_pci_parity },
1158 		{ "seltime", &aic79xx_seltime },
1159 		{ "tag_info", NULL },
1160 		{ "global_tag_depth", NULL},
1161 		{ "slewrate", NULL },
1162 		{ "precomp", NULL },
1163 		{ "amplitude", NULL },
1164 		{ "slowcrc", &aic79xx_slowcrc },
1165 	};
1166 
1167 	end = strchr(s, '\0');
1168 
1169 	/*
1170 	 * XXX ia64 gcc isn't smart enough to know that ARRAY_SIZE
1171 	 * will never be 0 in this case.
1172 	 */
1173 	n = 0;
1174 
1175 	while ((p = strsep(&s, ",.")) != NULL) {
1176 		if (*p == '\0')
1177 			continue;
1178 		for (i = 0; i < ARRAY_SIZE(options); i++) {
1179 
1180 			n = strlen(options[i].name);
1181 			if (strncmp(options[i].name, p, n) == 0)
1182 				break;
1183 		}
1184 		if (i == ARRAY_SIZE(options))
1185 			continue;
1186 
1187 		if (strncmp(p, "global_tag_depth", n) == 0) {
1188 			ahd_linux_setup_tag_info_global(p + n);
1189 		} else if (strncmp(p, "tag_info", n) == 0) {
1190 			s = ahd_parse_brace_option("tag_info", p + n, end,
1191 			    2, ahd_linux_setup_tag_info, 0);
1192 		} else if (strncmp(p, "slewrate", n) == 0) {
1193 			s = ahd_parse_brace_option("slewrate",
1194 			    p + n, end, 1, ahd_linux_setup_iocell_info,
1195 			    AIC79XX_SLEWRATE_INDEX);
1196 		} else if (strncmp(p, "precomp", n) == 0) {
1197 			s = ahd_parse_brace_option("precomp",
1198 			    p + n, end, 1, ahd_linux_setup_iocell_info,
1199 			    AIC79XX_PRECOMP_INDEX);
1200 		} else if (strncmp(p, "amplitude", n) == 0) {
1201 			s = ahd_parse_brace_option("amplitude",
1202 			    p + n, end, 1, ahd_linux_setup_iocell_info,
1203 			    AIC79XX_AMPLITUDE_INDEX);
1204 		} else if (p[n] == ':') {
1205 			*(options[i].flag) = simple_strtoul(p + n + 1, NULL, 0);
1206 		} else if (!strncmp(p, "verbose", n)) {
1207 			*(options[i].flag) = 1;
1208 		} else {
1209 			*(options[i].flag) ^= 0xFFFFFFFF;
1210 		}
1211 	}
1212 	return 1;
1213 }
1214 
1215 __setup("aic79xx=", aic79xx_setup);
1216 
1217 uint32_t aic79xx_verbose;
1218 
1219 int
1220 ahd_linux_register_host(struct ahd_softc *ahd, struct scsi_host_template *template)
1221 {
1222 	char	buf[80];
1223 	struct	Scsi_Host *host;
1224 	char	*new_name;
1225 	u_long	s;
1226 	int	retval;
1227 
1228 	template->name = ahd->description;
1229 	host = scsi_host_alloc(template, sizeof(struct ahd_softc *));
1230 	if (host == NULL)
1231 		return (ENOMEM);
1232 
1233 	*((struct ahd_softc **)host->hostdata) = ahd;
1234 	ahd->platform_data->host = host;
1235 	host->can_queue = AHD_MAX_QUEUE;
1236 	host->cmd_per_lun = 2;
1237 	host->sg_tablesize = AHD_NSEG;
1238 	host->this_id = ahd->our_id;
1239 	host->irq = ahd->platform_data->irq;
1240 	host->max_id = (ahd->features & AHD_WIDE) ? 16 : 8;
1241 	host->max_lun = AHD_NUM_LUNS;
1242 	host->max_channel = 0;
1243 	host->sg_tablesize = AHD_NSEG;
1244 	ahd_lock(ahd, &s);
1245 	ahd_set_unit(ahd, ahd_linux_unit++);
1246 	ahd_unlock(ahd, &s);
1247 	sprintf(buf, "scsi%d", host->host_no);
1248 	new_name = malloc(strlen(buf) + 1, M_DEVBUF, M_NOWAIT);
1249 	if (new_name != NULL) {
1250 		strcpy(new_name, buf);
1251 		ahd_set_name(ahd, new_name);
1252 	}
1253 	host->unique_id = ahd->unit;
1254 	ahd_linux_initialize_scsi_bus(ahd);
1255 	ahd_intr_enable(ahd, TRUE);
1256 
1257 	host->transportt = ahd_linux_transport_template;
1258 
1259 	retval = scsi_add_host(host, &ahd->dev_softc->dev);
1260 	if (retval) {
1261 		printk(KERN_WARNING "aic79xx: scsi_add_host failed\n");
1262 		scsi_host_put(host);
1263 		return retval;
1264 	}
1265 
1266 	scsi_scan_host(host);
1267 	return 0;
1268 }
1269 
1270 /*
1271  * Place the SCSI bus into a known state by either resetting it,
1272  * or forcing transfer negotiations on the next command to any
1273  * target.
1274  */
1275 static void
1276 ahd_linux_initialize_scsi_bus(struct ahd_softc *ahd)
1277 {
1278 	u_int target_id;
1279 	u_int numtarg;
1280 	unsigned long s;
1281 
1282 	target_id = 0;
1283 	numtarg = 0;
1284 
1285 	if (aic79xx_no_reset != 0)
1286 		ahd->flags &= ~AHD_RESET_BUS_A;
1287 
1288 	if ((ahd->flags & AHD_RESET_BUS_A) != 0)
1289 		ahd_reset_channel(ahd, 'A', /*initiate_reset*/TRUE);
1290 	else
1291 		numtarg = (ahd->features & AHD_WIDE) ? 16 : 8;
1292 
1293 	ahd_lock(ahd, &s);
1294 
1295 	/*
1296 	 * Force negotiation to async for all targets that
1297 	 * will not see an initial bus reset.
1298 	 */
1299 	for (; target_id < numtarg; target_id++) {
1300 		struct ahd_devinfo devinfo;
1301 		struct ahd_initiator_tinfo *tinfo;
1302 		struct ahd_tmode_tstate *tstate;
1303 
1304 		tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
1305 					    target_id, &tstate);
1306 		ahd_compile_devinfo(&devinfo, ahd->our_id, target_id,
1307 				    CAM_LUN_WILDCARD, 'A', ROLE_INITIATOR);
1308 		ahd_update_neg_request(ahd, &devinfo, tstate,
1309 				       tinfo, AHD_NEG_ALWAYS);
1310 	}
1311 	ahd_unlock(ahd, &s);
1312 	/* Give the bus some time to recover */
1313 	if ((ahd->flags & AHD_RESET_BUS_A) != 0) {
1314 		ahd_freeze_simq(ahd);
1315 		msleep(AIC79XX_RESET_DELAY);
1316 		ahd_release_simq(ahd);
1317 	}
1318 }
1319 
1320 int
1321 ahd_platform_alloc(struct ahd_softc *ahd, void *platform_arg)
1322 {
1323 	ahd->platform_data =
1324 	    malloc(sizeof(struct ahd_platform_data), M_DEVBUF, M_NOWAIT);
1325 	if (ahd->platform_data == NULL)
1326 		return (ENOMEM);
1327 	memset(ahd->platform_data, 0, sizeof(struct ahd_platform_data));
1328 	ahd->platform_data->irq = AHD_LINUX_NOIRQ;
1329 	ahd_lockinit(ahd);
1330 	ahd->seltime = (aic79xx_seltime & 0x3) << 4;
1331 	return (0);
1332 }
1333 
1334 void
1335 ahd_platform_free(struct ahd_softc *ahd)
1336 {
1337 	struct scsi_target *starget;
1338 	int i;
1339 
1340 	if (ahd->platform_data != NULL) {
1341 		/* destroy all of the device and target objects */
1342 		for (i = 0; i < AHD_NUM_TARGETS; i++) {
1343 			starget = ahd->platform_data->starget[i];
1344 			if (starget != NULL) {
1345 				ahd->platform_data->starget[i] = NULL;
1346 			}
1347 		}
1348 
1349 		if (ahd->platform_data->irq != AHD_LINUX_NOIRQ)
1350 			free_irq(ahd->platform_data->irq, ahd);
1351 		if (ahd->tags[0] == BUS_SPACE_PIO
1352 		 && ahd->bshs[0].ioport != 0)
1353 			release_region(ahd->bshs[0].ioport, 256);
1354 		if (ahd->tags[1] == BUS_SPACE_PIO
1355 		 && ahd->bshs[1].ioport != 0)
1356 			release_region(ahd->bshs[1].ioport, 256);
1357 		if (ahd->tags[0] == BUS_SPACE_MEMIO
1358 		 && ahd->bshs[0].maddr != NULL) {
1359 			iounmap(ahd->bshs[0].maddr);
1360 			release_mem_region(ahd->platform_data->mem_busaddr,
1361 					   0x1000);
1362 		}
1363 		if (ahd->platform_data->host)
1364 			scsi_host_put(ahd->platform_data->host);
1365 
1366 		free(ahd->platform_data, M_DEVBUF);
1367 	}
1368 }
1369 
1370 void
1371 ahd_platform_init(struct ahd_softc *ahd)
1372 {
1373 	/*
1374 	 * Lookup and commit any modified IO Cell options.
1375 	 */
1376 	if (ahd->unit < ARRAY_SIZE(aic79xx_iocell_info)) {
1377 		const struct ahd_linux_iocell_opts *iocell_opts;
1378 
1379 		iocell_opts = &aic79xx_iocell_info[ahd->unit];
1380 		if (iocell_opts->precomp != AIC79XX_DEFAULT_PRECOMP)
1381 			AHD_SET_PRECOMP(ahd, iocell_opts->precomp);
1382 		if (iocell_opts->slewrate != AIC79XX_DEFAULT_SLEWRATE)
1383 			AHD_SET_SLEWRATE(ahd, iocell_opts->slewrate);
1384 		if (iocell_opts->amplitude != AIC79XX_DEFAULT_AMPLITUDE)
1385 			AHD_SET_AMPLITUDE(ahd, iocell_opts->amplitude);
1386 	}
1387 
1388 }
1389 
1390 void
1391 ahd_platform_freeze_devq(struct ahd_softc *ahd, struct scb *scb)
1392 {
1393 	ahd_platform_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb),
1394 				SCB_GET_CHANNEL(ahd, scb),
1395 				SCB_GET_LUN(scb), SCB_LIST_NULL,
1396 				ROLE_UNKNOWN, CAM_REQUEUE_REQ);
1397 }
1398 
1399 void
1400 ahd_platform_set_tags(struct ahd_softc *ahd, struct scsi_device *sdev,
1401 		      struct ahd_devinfo *devinfo, ahd_queue_alg alg)
1402 {
1403 	struct ahd_linux_device *dev;
1404 	int was_queuing;
1405 	int now_queuing;
1406 
1407 	if (sdev == NULL)
1408 		return;
1409 
1410 	dev = scsi_transport_device_data(sdev);
1411 
1412 	if (dev == NULL)
1413 		return;
1414 	was_queuing = dev->flags & (AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED);
1415 	switch (alg) {
1416 	default:
1417 	case AHD_QUEUE_NONE:
1418 		now_queuing = 0;
1419 		break;
1420 	case AHD_QUEUE_BASIC:
1421 		now_queuing = AHD_DEV_Q_BASIC;
1422 		break;
1423 	case AHD_QUEUE_TAGGED:
1424 		now_queuing = AHD_DEV_Q_TAGGED;
1425 		break;
1426 	}
1427 	if ((dev->flags & AHD_DEV_FREEZE_TIL_EMPTY) == 0
1428 	 && (was_queuing != now_queuing)
1429 	 && (dev->active != 0)) {
1430 		dev->flags |= AHD_DEV_FREEZE_TIL_EMPTY;
1431 		dev->qfrozen++;
1432 	}
1433 
1434 	dev->flags &= ~(AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED|AHD_DEV_PERIODIC_OTAG);
1435 	if (now_queuing) {
1436 		u_int usertags;
1437 
1438 		usertags = ahd_linux_user_tagdepth(ahd, devinfo);
1439 		if (!was_queuing) {
1440 			/*
1441 			 * Start out agressively and allow our
1442 			 * dynamic queue depth algorithm to take
1443 			 * care of the rest.
1444 			 */
1445 			dev->maxtags = usertags;
1446 			dev->openings = dev->maxtags - dev->active;
1447 		}
1448 		if (dev->maxtags == 0) {
1449 			/*
1450 			 * Queueing is disabled by the user.
1451 			 */
1452 			dev->openings = 1;
1453 		} else if (alg == AHD_QUEUE_TAGGED) {
1454 			dev->flags |= AHD_DEV_Q_TAGGED;
1455 			if (aic79xx_periodic_otag != 0)
1456 				dev->flags |= AHD_DEV_PERIODIC_OTAG;
1457 		} else
1458 			dev->flags |= AHD_DEV_Q_BASIC;
1459 	} else {
1460 		/* We can only have one opening. */
1461 		dev->maxtags = 0;
1462 		dev->openings =  1 - dev->active;
1463 	}
1464 
1465 	switch ((dev->flags & (AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED))) {
1466 	case AHD_DEV_Q_BASIC:
1467 		scsi_set_tag_type(sdev, MSG_SIMPLE_TASK);
1468 		scsi_activate_tcq(sdev, dev->openings + dev->active);
1469 		break;
1470 	case AHD_DEV_Q_TAGGED:
1471 		scsi_set_tag_type(sdev, MSG_ORDERED_TASK);
1472 		scsi_activate_tcq(sdev, dev->openings + dev->active);
1473 		break;
1474 	default:
1475 		/*
1476 		 * We allow the OS to queue 2 untagged transactions to
1477 		 * us at any time even though we can only execute them
1478 		 * serially on the controller/device.  This should
1479 		 * remove some latency.
1480 		 */
1481 		scsi_deactivate_tcq(sdev, 1);
1482 		break;
1483 	}
1484 }
1485 
1486 int
1487 ahd_platform_abort_scbs(struct ahd_softc *ahd, int target, char channel,
1488 			int lun, u_int tag, role_t role, uint32_t status)
1489 {
1490 	return 0;
1491 }
1492 
1493 static u_int
1494 ahd_linux_user_tagdepth(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
1495 {
1496 	static int warned_user;
1497 	u_int tags;
1498 
1499 	tags = 0;
1500 	if ((ahd->user_discenable & devinfo->target_mask) != 0) {
1501 		if (ahd->unit >= ARRAY_SIZE(aic79xx_tag_info)) {
1502 
1503 			if (warned_user == 0) {
1504 				printf(KERN_WARNING
1505 "aic79xx: WARNING: Insufficient tag_info instances\n"
1506 "aic79xx: for installed controllers.  Using defaults\n"
1507 "aic79xx: Please update the aic79xx_tag_info array in\n"
1508 "aic79xx: the aic79xx_osm.c source file.\n");
1509 				warned_user++;
1510 			}
1511 			tags = AHD_MAX_QUEUE;
1512 		} else {
1513 			adapter_tag_info_t *tag_info;
1514 
1515 			tag_info = &aic79xx_tag_info[ahd->unit];
1516 			tags = tag_info->tag_commands[devinfo->target_offset];
1517 			if (tags > AHD_MAX_QUEUE)
1518 				tags = AHD_MAX_QUEUE;
1519 		}
1520 	}
1521 	return (tags);
1522 }
1523 
1524 /*
1525  * Determines the queue depth for a given device.
1526  */
1527 static void
1528 ahd_linux_device_queue_depth(struct scsi_device *sdev)
1529 {
1530 	struct	ahd_devinfo devinfo;
1531 	u_int	tags;
1532 	struct ahd_softc *ahd = *((struct ahd_softc **)sdev->host->hostdata);
1533 
1534 	ahd_compile_devinfo(&devinfo,
1535 			    ahd->our_id,
1536 			    sdev->sdev_target->id, sdev->lun,
1537 			    sdev->sdev_target->channel == 0 ? 'A' : 'B',
1538 			    ROLE_INITIATOR);
1539 	tags = ahd_linux_user_tagdepth(ahd, &devinfo);
1540 	if (tags != 0 && sdev->tagged_supported != 0) {
1541 
1542 		ahd_platform_set_tags(ahd, sdev, &devinfo, AHD_QUEUE_TAGGED);
1543 		ahd_send_async(ahd, devinfo.channel, devinfo.target,
1544 			       devinfo.lun, AC_TRANSFER_NEG);
1545 		ahd_print_devinfo(ahd, &devinfo);
1546 		printf("Tagged Queuing enabled.  Depth %d\n", tags);
1547 	} else {
1548 		ahd_platform_set_tags(ahd, sdev, &devinfo, AHD_QUEUE_NONE);
1549 		ahd_send_async(ahd, devinfo.channel, devinfo.target,
1550 			       devinfo.lun, AC_TRANSFER_NEG);
1551 	}
1552 }
1553 
1554 static int
1555 ahd_linux_run_command(struct ahd_softc *ahd, struct ahd_linux_device *dev,
1556 		      struct scsi_cmnd *cmd)
1557 {
1558 	struct	 scb *scb;
1559 	struct	 hardware_scb *hscb;
1560 	struct	 ahd_initiator_tinfo *tinfo;
1561 	struct	 ahd_tmode_tstate *tstate;
1562 	u_int	 col_idx;
1563 	uint16_t mask;
1564 	unsigned long flags;
1565 	int nseg;
1566 
1567 	nseg = scsi_dma_map(cmd);
1568 	if (nseg < 0)
1569 		return SCSI_MLQUEUE_HOST_BUSY;
1570 
1571 	ahd_lock(ahd, &flags);
1572 
1573 	/*
1574 	 * Get an scb to use.
1575 	 */
1576 	tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
1577 				    cmd->device->id, &tstate);
1578 	if ((dev->flags & (AHD_DEV_Q_TAGGED|AHD_DEV_Q_BASIC)) == 0
1579 	 || (tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0) {
1580 		col_idx = AHD_NEVER_COL_IDX;
1581 	} else {
1582 		col_idx = AHD_BUILD_COL_IDX(cmd->device->id,
1583 					    cmd->device->lun);
1584 	}
1585 	if ((scb = ahd_get_scb(ahd, col_idx)) == NULL) {
1586 		ahd->flags |= AHD_RESOURCE_SHORTAGE;
1587 		ahd_unlock(ahd, &flags);
1588 		scsi_dma_unmap(cmd);
1589 		return SCSI_MLQUEUE_HOST_BUSY;
1590 	}
1591 
1592 	scb->io_ctx = cmd;
1593 	scb->platform_data->dev = dev;
1594 	hscb = scb->hscb;
1595 	cmd->host_scribble = (char *)scb;
1596 
1597 	/*
1598 	 * Fill out basics of the HSCB.
1599 	 */
1600 	hscb->control = 0;
1601 	hscb->scsiid = BUILD_SCSIID(ahd, cmd);
1602 	hscb->lun = cmd->device->lun;
1603 	scb->hscb->task_management = 0;
1604 	mask = SCB_GET_TARGET_MASK(ahd, scb);
1605 
1606 	if ((ahd->user_discenable & mask) != 0)
1607 		hscb->control |= DISCENB;
1608 
1609 	if ((tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0)
1610 		scb->flags |= SCB_PACKETIZED;
1611 
1612 	if ((tstate->auto_negotiate & mask) != 0) {
1613 		scb->flags |= SCB_AUTO_NEGOTIATE;
1614 		scb->hscb->control |= MK_MESSAGE;
1615 	}
1616 
1617 	if ((dev->flags & (AHD_DEV_Q_TAGGED|AHD_DEV_Q_BASIC)) != 0) {
1618 		int	msg_bytes;
1619 		uint8_t tag_msgs[2];
1620 
1621 		msg_bytes = scsi_populate_tag_msg(cmd, tag_msgs);
1622 		if (msg_bytes && tag_msgs[0] != MSG_SIMPLE_TASK) {
1623 			hscb->control |= tag_msgs[0];
1624 			if (tag_msgs[0] == MSG_ORDERED_TASK)
1625 				dev->commands_since_idle_or_otag = 0;
1626 		} else
1627 		if (dev->commands_since_idle_or_otag == AHD_OTAG_THRESH
1628 		 && (dev->flags & AHD_DEV_Q_TAGGED) != 0) {
1629 			hscb->control |= MSG_ORDERED_TASK;
1630 			dev->commands_since_idle_or_otag = 0;
1631 		} else {
1632 			hscb->control |= MSG_SIMPLE_TASK;
1633 		}
1634 	}
1635 
1636 	hscb->cdb_len = cmd->cmd_len;
1637 	memcpy(hscb->shared_data.idata.cdb, cmd->cmnd, hscb->cdb_len);
1638 
1639 	scb->platform_data->xfer_len = 0;
1640 	ahd_set_residual(scb, 0);
1641 	ahd_set_sense_residual(scb, 0);
1642 	scb->sg_count = 0;
1643 
1644 	if (nseg > 0) {
1645 		void *sg = scb->sg_list;
1646 		struct scatterlist *cur_seg;
1647 		int i;
1648 
1649 		scb->platform_data->xfer_len = 0;
1650 
1651 		scsi_for_each_sg(cmd, cur_seg, nseg, i) {
1652 			dma_addr_t addr;
1653 			bus_size_t len;
1654 
1655 			addr = sg_dma_address(cur_seg);
1656 			len = sg_dma_len(cur_seg);
1657 			scb->platform_data->xfer_len += len;
1658 			sg = ahd_sg_setup(ahd, scb, sg, addr, len,
1659 					  i == (nseg - 1));
1660 		}
1661 	}
1662 
1663 	LIST_INSERT_HEAD(&ahd->pending_scbs, scb, pending_links);
1664 	dev->openings--;
1665 	dev->active++;
1666 	dev->commands_issued++;
1667 
1668 	if ((dev->flags & AHD_DEV_PERIODIC_OTAG) != 0)
1669 		dev->commands_since_idle_or_otag++;
1670 	scb->flags |= SCB_ACTIVE;
1671 	ahd_queue_scb(ahd, scb);
1672 
1673 	ahd_unlock(ahd, &flags);
1674 
1675 	return 0;
1676 }
1677 
1678 /*
1679  * SCSI controller interrupt handler.
1680  */
1681 irqreturn_t
1682 ahd_linux_isr(int irq, void *dev_id)
1683 {
1684 	struct	ahd_softc *ahd;
1685 	u_long	flags;
1686 	int	ours;
1687 
1688 	ahd = (struct ahd_softc *) dev_id;
1689 	ahd_lock(ahd, &flags);
1690 	ours = ahd_intr(ahd);
1691 	ahd_unlock(ahd, &flags);
1692 	return IRQ_RETVAL(ours);
1693 }
1694 
1695 void
1696 ahd_send_async(struct ahd_softc *ahd, char channel,
1697 	       u_int target, u_int lun, ac_code code)
1698 {
1699 	switch (code) {
1700 	case AC_TRANSFER_NEG:
1701 	{
1702 		char	buf[80];
1703 		struct  scsi_target *starget;
1704 		struct	info_str info;
1705 		struct	ahd_initiator_tinfo *tinfo;
1706 		struct	ahd_tmode_tstate *tstate;
1707 		unsigned int target_ppr_options;
1708 
1709 		BUG_ON(target == CAM_TARGET_WILDCARD);
1710 
1711 		info.buffer = buf;
1712 		info.length = sizeof(buf);
1713 		info.offset = 0;
1714 		info.pos = 0;
1715 		tinfo = ahd_fetch_transinfo(ahd, channel, ahd->our_id,
1716 					    target, &tstate);
1717 
1718 		/*
1719 		 * Don't bother reporting results while
1720 		 * negotiations are still pending.
1721 		 */
1722 		if (tinfo->curr.period != tinfo->goal.period
1723 		 || tinfo->curr.width != tinfo->goal.width
1724 		 || tinfo->curr.offset != tinfo->goal.offset
1725 		 || tinfo->curr.ppr_options != tinfo->goal.ppr_options)
1726 			if (bootverbose == 0)
1727 				break;
1728 
1729 		/*
1730 		 * Don't bother reporting results that
1731 		 * are identical to those last reported.
1732 		 */
1733 		starget = ahd->platform_data->starget[target];
1734 		if (starget == NULL)
1735 			break;
1736 
1737 		target_ppr_options =
1738 			(spi_dt(starget) ? MSG_EXT_PPR_DT_REQ : 0)
1739 			+ (spi_qas(starget) ? MSG_EXT_PPR_QAS_REQ : 0)
1740 			+ (spi_iu(starget) ?  MSG_EXT_PPR_IU_REQ : 0)
1741 			+ (spi_rd_strm(starget) ? MSG_EXT_PPR_RD_STRM : 0)
1742 			+ (spi_pcomp_en(starget) ? MSG_EXT_PPR_PCOMP_EN : 0)
1743 			+ (spi_rti(starget) ? MSG_EXT_PPR_RTI : 0)
1744 			+ (spi_wr_flow(starget) ? MSG_EXT_PPR_WR_FLOW : 0)
1745 			+ (spi_hold_mcs(starget) ? MSG_EXT_PPR_HOLD_MCS : 0);
1746 
1747 		if (tinfo->curr.period == spi_period(starget)
1748 		    && tinfo->curr.width == spi_width(starget)
1749 		    && tinfo->curr.offset == spi_offset(starget)
1750 		 && tinfo->curr.ppr_options == target_ppr_options)
1751 			if (bootverbose == 0)
1752 				break;
1753 
1754 		spi_period(starget) = tinfo->curr.period;
1755 		spi_width(starget) = tinfo->curr.width;
1756 		spi_offset(starget) = tinfo->curr.offset;
1757 		spi_dt(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_DT_REQ ? 1 : 0;
1758 		spi_qas(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_QAS_REQ ? 1 : 0;
1759 		spi_iu(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ ? 1 : 0;
1760 		spi_rd_strm(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_RD_STRM ? 1 : 0;
1761 		spi_pcomp_en(starget) =  tinfo->curr.ppr_options & MSG_EXT_PPR_PCOMP_EN ? 1 : 0;
1762 		spi_rti(starget) =  tinfo->curr.ppr_options &  MSG_EXT_PPR_RTI ? 1 : 0;
1763 		spi_wr_flow(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_WR_FLOW ? 1 : 0;
1764 		spi_hold_mcs(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_HOLD_MCS ? 1 : 0;
1765 		spi_display_xfer_agreement(starget);
1766 		break;
1767 	}
1768         case AC_SENT_BDR:
1769 	{
1770 		WARN_ON(lun != CAM_LUN_WILDCARD);
1771 		scsi_report_device_reset(ahd->platform_data->host,
1772 					 channel - 'A', target);
1773 		break;
1774 	}
1775         case AC_BUS_RESET:
1776 		if (ahd->platform_data->host != NULL) {
1777 			scsi_report_bus_reset(ahd->platform_data->host,
1778 					      channel - 'A');
1779 		}
1780                 break;
1781         default:
1782                 panic("ahd_send_async: Unexpected async event");
1783         }
1784 }
1785 
1786 /*
1787  * Calls the higher level scsi done function and frees the scb.
1788  */
1789 void
1790 ahd_done(struct ahd_softc *ahd, struct scb *scb)
1791 {
1792 	struct scsi_cmnd *cmd;
1793 	struct	  ahd_linux_device *dev;
1794 
1795 	if ((scb->flags & SCB_ACTIVE) == 0) {
1796 		printf("SCB %d done'd twice\n", SCB_GET_TAG(scb));
1797 		ahd_dump_card_state(ahd);
1798 		panic("Stopping for safety");
1799 	}
1800 	LIST_REMOVE(scb, pending_links);
1801 	cmd = scb->io_ctx;
1802 	dev = scb->platform_data->dev;
1803 	dev->active--;
1804 	dev->openings++;
1805 	if ((cmd->result & (CAM_DEV_QFRZN << 16)) != 0) {
1806 		cmd->result &= ~(CAM_DEV_QFRZN << 16);
1807 		dev->qfrozen--;
1808 	}
1809 	ahd_linux_unmap_scb(ahd, scb);
1810 
1811 	/*
1812 	 * Guard against stale sense data.
1813 	 * The Linux mid-layer assumes that sense
1814 	 * was retrieved anytime the first byte of
1815 	 * the sense buffer looks "sane".
1816 	 */
1817 	cmd->sense_buffer[0] = 0;
1818 	if (ahd_get_transaction_status(scb) == CAM_REQ_INPROG) {
1819 		uint32_t amount_xferred;
1820 
1821 		amount_xferred =
1822 		    ahd_get_transfer_length(scb) - ahd_get_residual(scb);
1823 		if ((scb->flags & SCB_TRANSMISSION_ERROR) != 0) {
1824 #ifdef AHD_DEBUG
1825 			if ((ahd_debug & AHD_SHOW_MISC) != 0) {
1826 				ahd_print_path(ahd, scb);
1827 				printf("Set CAM_UNCOR_PARITY\n");
1828 			}
1829 #endif
1830 			ahd_set_transaction_status(scb, CAM_UNCOR_PARITY);
1831 #ifdef AHD_REPORT_UNDERFLOWS
1832 		/*
1833 		 * This code is disabled by default as some
1834 		 * clients of the SCSI system do not properly
1835 		 * initialize the underflow parameter.  This
1836 		 * results in spurious termination of commands
1837 		 * that complete as expected (e.g. underflow is
1838 		 * allowed as command can return variable amounts
1839 		 * of data.
1840 		 */
1841 		} else if (amount_xferred < scb->io_ctx->underflow) {
1842 			u_int i;
1843 
1844 			ahd_print_path(ahd, scb);
1845 			printf("CDB:");
1846 			for (i = 0; i < scb->io_ctx->cmd_len; i++)
1847 				printf(" 0x%x", scb->io_ctx->cmnd[i]);
1848 			printf("\n");
1849 			ahd_print_path(ahd, scb);
1850 			printf("Saw underflow (%ld of %ld bytes). "
1851 			       "Treated as error\n",
1852 				ahd_get_residual(scb),
1853 				ahd_get_transfer_length(scb));
1854 			ahd_set_transaction_status(scb, CAM_DATA_RUN_ERR);
1855 #endif
1856 		} else {
1857 			ahd_set_transaction_status(scb, CAM_REQ_CMP);
1858 		}
1859 	} else if (ahd_get_transaction_status(scb) == CAM_SCSI_STATUS_ERROR) {
1860 		ahd_linux_handle_scsi_status(ahd, cmd->device, scb);
1861 	}
1862 
1863 	if (dev->openings == 1
1864 	 && ahd_get_transaction_status(scb) == CAM_REQ_CMP
1865 	 && ahd_get_scsi_status(scb) != SCSI_STATUS_QUEUE_FULL)
1866 		dev->tag_success_count++;
1867 	/*
1868 	 * Some devices deal with temporary internal resource
1869 	 * shortages by returning queue full.  When the queue
1870 	 * full occurrs, we throttle back.  Slowly try to get
1871 	 * back to our previous queue depth.
1872 	 */
1873 	if ((dev->openings + dev->active) < dev->maxtags
1874 	 && dev->tag_success_count > AHD_TAG_SUCCESS_INTERVAL) {
1875 		dev->tag_success_count = 0;
1876 		dev->openings++;
1877 	}
1878 
1879 	if (dev->active == 0)
1880 		dev->commands_since_idle_or_otag = 0;
1881 
1882 	if ((scb->flags & SCB_RECOVERY_SCB) != 0) {
1883 		printf("Recovery SCB completes\n");
1884 		if (ahd_get_transaction_status(scb) == CAM_BDR_SENT
1885 		 || ahd_get_transaction_status(scb) == CAM_REQ_ABORTED)
1886 			ahd_set_transaction_status(scb, CAM_CMD_TIMEOUT);
1887 
1888 		if (ahd->platform_data->eh_done)
1889 			complete(ahd->platform_data->eh_done);
1890 	}
1891 
1892 	ahd_free_scb(ahd, scb);
1893 	ahd_linux_queue_cmd_complete(ahd, cmd);
1894 }
1895 
1896 static void
1897 ahd_linux_handle_scsi_status(struct ahd_softc *ahd,
1898 			     struct scsi_device *sdev, struct scb *scb)
1899 {
1900 	struct	ahd_devinfo devinfo;
1901 	struct ahd_linux_device *dev = scsi_transport_device_data(sdev);
1902 
1903 	ahd_compile_devinfo(&devinfo,
1904 			    ahd->our_id,
1905 			    sdev->sdev_target->id, sdev->lun,
1906 			    sdev->sdev_target->channel == 0 ? 'A' : 'B',
1907 			    ROLE_INITIATOR);
1908 
1909 	/*
1910 	 * We don't currently trust the mid-layer to
1911 	 * properly deal with queue full or busy.  So,
1912 	 * when one occurs, we tell the mid-layer to
1913 	 * unconditionally requeue the command to us
1914 	 * so that we can retry it ourselves.  We also
1915 	 * implement our own throttling mechanism so
1916 	 * we don't clobber the device with too many
1917 	 * commands.
1918 	 */
1919 	switch (ahd_get_scsi_status(scb)) {
1920 	default:
1921 		break;
1922 	case SCSI_STATUS_CHECK_COND:
1923 	case SCSI_STATUS_CMD_TERMINATED:
1924 	{
1925 		struct scsi_cmnd *cmd;
1926 
1927 		/*
1928 		 * Copy sense information to the OS's cmd
1929 		 * structure if it is available.
1930 		 */
1931 		cmd = scb->io_ctx;
1932 		if ((scb->flags & (SCB_SENSE|SCB_PKT_SENSE)) != 0) {
1933 			struct scsi_status_iu_header *siu;
1934 			u_int sense_size;
1935 			u_int sense_offset;
1936 
1937 			if (scb->flags & SCB_SENSE) {
1938 				sense_size = min(sizeof(struct scsi_sense_data)
1939 					       - ahd_get_sense_residual(scb),
1940 						 (u_long)SCSI_SENSE_BUFFERSIZE);
1941 				sense_offset = 0;
1942 			} else {
1943 				/*
1944 				 * Copy only the sense data into the provided
1945 				 * buffer.
1946 				 */
1947 				siu = (struct scsi_status_iu_header *)
1948 				    scb->sense_data;
1949 				sense_size = min_t(size_t,
1950 						scsi_4btoul(siu->sense_length),
1951 						SCSI_SENSE_BUFFERSIZE);
1952 				sense_offset = SIU_SENSE_OFFSET(siu);
1953 			}
1954 
1955 			memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
1956 			memcpy(cmd->sense_buffer,
1957 			       ahd_get_sense_buf(ahd, scb)
1958 			       + sense_offset, sense_size);
1959 			cmd->result |= (DRIVER_SENSE << 24);
1960 
1961 #ifdef AHD_DEBUG
1962 			if (ahd_debug & AHD_SHOW_SENSE) {
1963 				int i;
1964 
1965 				printf("Copied %d bytes of sense data at %d:",
1966 				       sense_size, sense_offset);
1967 				for (i = 0; i < sense_size; i++) {
1968 					if ((i & 0xF) == 0)
1969 						printf("\n");
1970 					printf("0x%x ", cmd->sense_buffer[i]);
1971 				}
1972 				printf("\n");
1973 			}
1974 #endif
1975 		}
1976 		break;
1977 	}
1978 	case SCSI_STATUS_QUEUE_FULL:
1979 		/*
1980 		 * By the time the core driver has returned this
1981 		 * command, all other commands that were queued
1982 		 * to us but not the device have been returned.
1983 		 * This ensures that dev->active is equal to
1984 		 * the number of commands actually queued to
1985 		 * the device.
1986 		 */
1987 		dev->tag_success_count = 0;
1988 		if (dev->active != 0) {
1989 			/*
1990 			 * Drop our opening count to the number
1991 			 * of commands currently outstanding.
1992 			 */
1993 			dev->openings = 0;
1994 #ifdef AHD_DEBUG
1995 			if ((ahd_debug & AHD_SHOW_QFULL) != 0) {
1996 				ahd_print_path(ahd, scb);
1997 				printf("Dropping tag count to %d\n",
1998 				       dev->active);
1999 			}
2000 #endif
2001 			if (dev->active == dev->tags_on_last_queuefull) {
2002 
2003 				dev->last_queuefull_same_count++;
2004 				/*
2005 				 * If we repeatedly see a queue full
2006 				 * at the same queue depth, this
2007 				 * device has a fixed number of tag
2008 				 * slots.  Lock in this tag depth
2009 				 * so we stop seeing queue fulls from
2010 				 * this device.
2011 				 */
2012 				if (dev->last_queuefull_same_count
2013 				 == AHD_LOCK_TAGS_COUNT) {
2014 					dev->maxtags = dev->active;
2015 					ahd_print_path(ahd, scb);
2016 					printf("Locking max tag count at %d\n",
2017 					       dev->active);
2018 				}
2019 			} else {
2020 				dev->tags_on_last_queuefull = dev->active;
2021 				dev->last_queuefull_same_count = 0;
2022 			}
2023 			ahd_set_transaction_status(scb, CAM_REQUEUE_REQ);
2024 			ahd_set_scsi_status(scb, SCSI_STATUS_OK);
2025 			ahd_platform_set_tags(ahd, sdev, &devinfo,
2026 				     (dev->flags & AHD_DEV_Q_BASIC)
2027 				   ? AHD_QUEUE_BASIC : AHD_QUEUE_TAGGED);
2028 			break;
2029 		}
2030 		/*
2031 		 * Drop down to a single opening, and treat this
2032 		 * as if the target returned BUSY SCSI status.
2033 		 */
2034 		dev->openings = 1;
2035 		ahd_platform_set_tags(ahd, sdev, &devinfo,
2036 			     (dev->flags & AHD_DEV_Q_BASIC)
2037 			   ? AHD_QUEUE_BASIC : AHD_QUEUE_TAGGED);
2038 		ahd_set_scsi_status(scb, SCSI_STATUS_BUSY);
2039 	}
2040 }
2041 
2042 static void
2043 ahd_linux_queue_cmd_complete(struct ahd_softc *ahd, struct scsi_cmnd *cmd)
2044 {
2045 	int status;
2046 	int new_status = DID_OK;
2047 	int do_fallback = 0;
2048 	int scsi_status;
2049 
2050 	/*
2051 	 * Map CAM error codes into Linux Error codes.  We
2052 	 * avoid the conversion so that the DV code has the
2053 	 * full error information available when making
2054 	 * state change decisions.
2055 	 */
2056 
2057 	status = ahd_cmd_get_transaction_status(cmd);
2058 	switch (status) {
2059 	case CAM_REQ_INPROG:
2060 	case CAM_REQ_CMP:
2061 		new_status = DID_OK;
2062 		break;
2063 	case CAM_AUTOSENSE_FAIL:
2064 		new_status = DID_ERROR;
2065 		/* Fallthrough */
2066 	case CAM_SCSI_STATUS_ERROR:
2067 		scsi_status = ahd_cmd_get_scsi_status(cmd);
2068 
2069 		switch(scsi_status) {
2070 		case SCSI_STATUS_CMD_TERMINATED:
2071 		case SCSI_STATUS_CHECK_COND:
2072 			if ((cmd->result >> 24) != DRIVER_SENSE) {
2073 				do_fallback = 1;
2074 			} else {
2075 				struct scsi_sense_data *sense;
2076 
2077 				sense = (struct scsi_sense_data *)
2078 					cmd->sense_buffer;
2079 				if (sense->extra_len >= 5 &&
2080 				    (sense->add_sense_code == 0x47
2081 				     || sense->add_sense_code == 0x48))
2082 					do_fallback = 1;
2083 			}
2084 			break;
2085 		default:
2086 			break;
2087 		}
2088 		break;
2089 	case CAM_REQ_ABORTED:
2090 		new_status = DID_ABORT;
2091 		break;
2092 	case CAM_BUSY:
2093 		new_status = DID_BUS_BUSY;
2094 		break;
2095 	case CAM_REQ_INVALID:
2096 	case CAM_PATH_INVALID:
2097 		new_status = DID_BAD_TARGET;
2098 		break;
2099 	case CAM_SEL_TIMEOUT:
2100 		new_status = DID_NO_CONNECT;
2101 		break;
2102 	case CAM_SCSI_BUS_RESET:
2103 	case CAM_BDR_SENT:
2104 		new_status = DID_RESET;
2105 		break;
2106 	case CAM_UNCOR_PARITY:
2107 		new_status = DID_PARITY;
2108 		do_fallback = 1;
2109 		break;
2110 	case CAM_CMD_TIMEOUT:
2111 		new_status = DID_TIME_OUT;
2112 		do_fallback = 1;
2113 		break;
2114 	case CAM_REQ_CMP_ERR:
2115 	case CAM_UNEXP_BUSFREE:
2116 	case CAM_DATA_RUN_ERR:
2117 		new_status = DID_ERROR;
2118 		do_fallback = 1;
2119 		break;
2120 	case CAM_UA_ABORT:
2121 	case CAM_NO_HBA:
2122 	case CAM_SEQUENCE_FAIL:
2123 	case CAM_CCB_LEN_ERR:
2124 	case CAM_PROVIDE_FAIL:
2125 	case CAM_REQ_TERMIO:
2126 	case CAM_UNREC_HBA_ERROR:
2127 	case CAM_REQ_TOO_BIG:
2128 		new_status = DID_ERROR;
2129 		break;
2130 	case CAM_REQUEUE_REQ:
2131 		new_status = DID_REQUEUE;
2132 		break;
2133 	default:
2134 		/* We should never get here */
2135 		new_status = DID_ERROR;
2136 		break;
2137 	}
2138 
2139 	if (do_fallback) {
2140 		printf("%s: device overrun (status %x) on %d:%d:%d\n",
2141 		       ahd_name(ahd), status, cmd->device->channel,
2142 		       cmd->device->id, cmd->device->lun);
2143 	}
2144 
2145 	ahd_cmd_set_transaction_status(cmd, new_status);
2146 
2147 	cmd->scsi_done(cmd);
2148 }
2149 
2150 static void
2151 ahd_freeze_simq(struct ahd_softc *ahd)
2152 {
2153 	scsi_block_requests(ahd->platform_data->host);
2154 }
2155 
2156 static void
2157 ahd_release_simq(struct ahd_softc *ahd)
2158 {
2159 	scsi_unblock_requests(ahd->platform_data->host);
2160 }
2161 
2162 static int
2163 ahd_linux_queue_abort_cmd(struct scsi_cmnd *cmd)
2164 {
2165 	struct ahd_softc *ahd;
2166 	struct ahd_linux_device *dev;
2167 	struct scb *pending_scb;
2168 	u_int  saved_scbptr;
2169 	u_int  active_scbptr;
2170 	u_int  last_phase;
2171 	u_int  saved_scsiid;
2172 	u_int  cdb_byte;
2173 	int    retval;
2174 	int    was_paused;
2175 	int    paused;
2176 	int    wait;
2177 	int    disconnected;
2178 	ahd_mode_state saved_modes;
2179 	unsigned long flags;
2180 
2181 	pending_scb = NULL;
2182 	paused = FALSE;
2183 	wait = FALSE;
2184 	ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
2185 
2186 	scmd_printk(KERN_INFO, cmd,
2187 		    "Attempting to queue an ABORT message:");
2188 
2189 	printf("CDB:");
2190 	for (cdb_byte = 0; cdb_byte < cmd->cmd_len; cdb_byte++)
2191 		printf(" 0x%x", cmd->cmnd[cdb_byte]);
2192 	printf("\n");
2193 
2194 	ahd_lock(ahd, &flags);
2195 
2196 	/*
2197 	 * First determine if we currently own this command.
2198 	 * Start by searching the device queue.  If not found
2199 	 * there, check the pending_scb list.  If not found
2200 	 * at all, and the system wanted us to just abort the
2201 	 * command, return success.
2202 	 */
2203 	dev = scsi_transport_device_data(cmd->device);
2204 
2205 	if (dev == NULL) {
2206 		/*
2207 		 * No target device for this command exists,
2208 		 * so we must not still own the command.
2209 		 */
2210 		scmd_printk(KERN_INFO, cmd, "Is not an active device\n");
2211 		retval = SUCCESS;
2212 		goto no_cmd;
2213 	}
2214 
2215 	/*
2216 	 * See if we can find a matching cmd in the pending list.
2217 	 */
2218 	LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) {
2219 		if (pending_scb->io_ctx == cmd)
2220 			break;
2221 	}
2222 
2223 	if (pending_scb == NULL) {
2224 		scmd_printk(KERN_INFO, cmd, "Command not found\n");
2225 		goto no_cmd;
2226 	}
2227 
2228 	if ((pending_scb->flags & SCB_RECOVERY_SCB) != 0) {
2229 		/*
2230 		 * We can't queue two recovery actions using the same SCB
2231 		 */
2232 		retval = FAILED;
2233 		goto  done;
2234 	}
2235 
2236 	/*
2237 	 * Ensure that the card doesn't do anything
2238 	 * behind our back.  Also make sure that we
2239 	 * didn't "just" miss an interrupt that would
2240 	 * affect this cmd.
2241 	 */
2242 	was_paused = ahd_is_paused(ahd);
2243 	ahd_pause_and_flushwork(ahd);
2244 	paused = TRUE;
2245 
2246 	if ((pending_scb->flags & SCB_ACTIVE) == 0) {
2247 		scmd_printk(KERN_INFO, cmd, "Command already completed\n");
2248 		goto no_cmd;
2249 	}
2250 
2251 	printf("%s: At time of recovery, card was %spaused\n",
2252 	       ahd_name(ahd), was_paused ? "" : "not ");
2253 	ahd_dump_card_state(ahd);
2254 
2255 	disconnected = TRUE;
2256 	if (ahd_search_qinfifo(ahd, cmd->device->id,
2257 			       cmd->device->channel + 'A',
2258 			       cmd->device->lun,
2259 			       pending_scb->hscb->tag,
2260 			       ROLE_INITIATOR, CAM_REQ_ABORTED,
2261 			       SEARCH_COMPLETE) > 0) {
2262 		printf("%s:%d:%d:%d: Cmd aborted from QINFIFO\n",
2263 		       ahd_name(ahd), cmd->device->channel,
2264 		       cmd->device->id, cmd->device->lun);
2265 		retval = SUCCESS;
2266 		goto done;
2267 	}
2268 
2269 	saved_modes = ahd_save_modes(ahd);
2270 	ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
2271 	last_phase = ahd_inb(ahd, LASTPHASE);
2272 	saved_scbptr = ahd_get_scbptr(ahd);
2273 	active_scbptr = saved_scbptr;
2274 	if (disconnected && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) == 0) {
2275 		struct scb *bus_scb;
2276 
2277 		bus_scb = ahd_lookup_scb(ahd, active_scbptr);
2278 		if (bus_scb == pending_scb)
2279 			disconnected = FALSE;
2280 	}
2281 
2282 	/*
2283 	 * At this point, pending_scb is the scb associated with the
2284 	 * passed in command.  That command is currently active on the
2285 	 * bus or is in the disconnected state.
2286 	 */
2287 	saved_scsiid = ahd_inb(ahd, SAVED_SCSIID);
2288 	if (last_phase != P_BUSFREE
2289 	    && SCB_GET_TAG(pending_scb) == active_scbptr) {
2290 
2291 		/*
2292 		 * We're active on the bus, so assert ATN
2293 		 * and hope that the target responds.
2294 		 */
2295 		pending_scb = ahd_lookup_scb(ahd, active_scbptr);
2296 		pending_scb->flags |= SCB_RECOVERY_SCB|SCB_ABORT;
2297 		ahd_outb(ahd, MSG_OUT, HOST_MSG);
2298 		ahd_outb(ahd, SCSISIGO, last_phase|ATNO);
2299 		scmd_printk(KERN_INFO, cmd, "Device is active, asserting ATN\n");
2300 		wait = TRUE;
2301 	} else if (disconnected) {
2302 
2303 		/*
2304 		 * Actually re-queue this SCB in an attempt
2305 		 * to select the device before it reconnects.
2306 		 */
2307 		pending_scb->flags |= SCB_RECOVERY_SCB|SCB_ABORT;
2308 		ahd_set_scbptr(ahd, SCB_GET_TAG(pending_scb));
2309 		pending_scb->hscb->cdb_len = 0;
2310 		pending_scb->hscb->task_attribute = 0;
2311 		pending_scb->hscb->task_management = SIU_TASKMGMT_ABORT_TASK;
2312 
2313 		if ((pending_scb->flags & SCB_PACKETIZED) != 0) {
2314 			/*
2315 			 * Mark the SCB has having an outstanding
2316 			 * task management function.  Should the command
2317 			 * complete normally before the task management
2318 			 * function can be sent, the host will be notified
2319 			 * to abort our requeued SCB.
2320 			 */
2321 			ahd_outb(ahd, SCB_TASK_MANAGEMENT,
2322 				 pending_scb->hscb->task_management);
2323 		} else {
2324 			/*
2325 			 * If non-packetized, set the MK_MESSAGE control
2326 			 * bit indicating that we desire to send a message.
2327 			 * We also set the disconnected flag since there is
2328 			 * no guarantee that our SCB control byte matches
2329 			 * the version on the card.  We don't want the
2330 			 * sequencer to abort the command thinking an
2331 			 * unsolicited reselection occurred.
2332 			 */
2333 			pending_scb->hscb->control |= MK_MESSAGE|DISCONNECTED;
2334 
2335 			/*
2336 			 * The sequencer will never re-reference the
2337 			 * in-core SCB.  To make sure we are notified
2338 			 * during reslection, set the MK_MESSAGE flag in
2339 			 * the card's copy of the SCB.
2340 			 */
2341 			ahd_outb(ahd, SCB_CONTROL,
2342 				 ahd_inb(ahd, SCB_CONTROL)|MK_MESSAGE);
2343 		}
2344 
2345 		/*
2346 		 * Clear out any entries in the QINFIFO first
2347 		 * so we are the next SCB for this target
2348 		 * to run.
2349 		 */
2350 		ahd_search_qinfifo(ahd, cmd->device->id,
2351 				   cmd->device->channel + 'A', cmd->device->lun,
2352 				   SCB_LIST_NULL, ROLE_INITIATOR,
2353 				   CAM_REQUEUE_REQ, SEARCH_COMPLETE);
2354 		ahd_qinfifo_requeue_tail(ahd, pending_scb);
2355 		ahd_set_scbptr(ahd, saved_scbptr);
2356 		ahd_print_path(ahd, pending_scb);
2357 		printf("Device is disconnected, re-queuing SCB\n");
2358 		wait = TRUE;
2359 	} else {
2360 		scmd_printk(KERN_INFO, cmd, "Unable to deliver message\n");
2361 		retval = FAILED;
2362 		goto done;
2363 	}
2364 
2365 no_cmd:
2366 	/*
2367 	 * Our assumption is that if we don't have the command, no
2368 	 * recovery action was required, so we return success.  Again,
2369 	 * the semantics of the mid-layer recovery engine are not
2370 	 * well defined, so this may change in time.
2371 	 */
2372 	retval = SUCCESS;
2373 done:
2374 	if (paused)
2375 		ahd_unpause(ahd);
2376 	if (wait) {
2377 		DECLARE_COMPLETION_ONSTACK(done);
2378 
2379 		ahd->platform_data->eh_done = &done;
2380 		ahd_unlock(ahd, &flags);
2381 
2382 		printf("%s: Recovery code sleeping\n", ahd_name(ahd));
2383 		if (!wait_for_completion_timeout(&done, 5 * HZ)) {
2384 			ahd_lock(ahd, &flags);
2385 			ahd->platform_data->eh_done = NULL;
2386 			ahd_unlock(ahd, &flags);
2387 			printf("%s: Timer Expired (active %d)\n",
2388 			       ahd_name(ahd), dev->active);
2389 			retval = FAILED;
2390 		}
2391 		printf("Recovery code awake\n");
2392 	} else
2393 		ahd_unlock(ahd, &flags);
2394 
2395 	if (retval != SUCCESS)
2396 		printf("%s: Command abort returning 0x%x\n",
2397 		       ahd_name(ahd), retval);
2398 
2399 	return retval;
2400 }
2401 
2402 static void ahd_linux_set_width(struct scsi_target *starget, int width)
2403 {
2404 	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2405 	struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2406 	struct ahd_devinfo devinfo;
2407 	unsigned long flags;
2408 
2409 	ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2410 			    starget->channel + 'A', ROLE_INITIATOR);
2411 	ahd_lock(ahd, &flags);
2412 	ahd_set_width(ahd, &devinfo, width, AHD_TRANS_GOAL, FALSE);
2413 	ahd_unlock(ahd, &flags);
2414 }
2415 
2416 static void ahd_linux_set_period(struct scsi_target *starget, int period)
2417 {
2418 	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2419 	struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2420 	struct ahd_tmode_tstate *tstate;
2421 	struct ahd_initiator_tinfo *tinfo
2422 		= ahd_fetch_transinfo(ahd,
2423 				      starget->channel + 'A',
2424 				      shost->this_id, starget->id, &tstate);
2425 	struct ahd_devinfo devinfo;
2426 	unsigned int ppr_options = tinfo->goal.ppr_options;
2427 	unsigned int dt;
2428 	unsigned long flags;
2429 	unsigned long offset = tinfo->goal.offset;
2430 
2431 #ifdef AHD_DEBUG
2432 	if ((ahd_debug & AHD_SHOW_DV) != 0)
2433 		printf("%s: set period to %d\n", ahd_name(ahd), period);
2434 #endif
2435 	if (offset == 0)
2436 		offset = MAX_OFFSET;
2437 
2438 	if (period < 8)
2439 		period = 8;
2440 	if (period < 10) {
2441 		if (spi_max_width(starget)) {
2442 			ppr_options |= MSG_EXT_PPR_DT_REQ;
2443 			if (period == 8)
2444 				ppr_options |= MSG_EXT_PPR_IU_REQ;
2445 		} else
2446 			period = 10;
2447 	}
2448 
2449 	dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2450 
2451 	ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2452 			    starget->channel + 'A', ROLE_INITIATOR);
2453 
2454 	/* all PPR requests apart from QAS require wide transfers */
2455 	if (ppr_options & ~MSG_EXT_PPR_QAS_REQ) {
2456 		if (spi_width(starget) == 0)
2457 			ppr_options &= MSG_EXT_PPR_QAS_REQ;
2458 	}
2459 
2460 	ahd_find_syncrate(ahd, &period, &ppr_options,
2461 			  dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2462 
2463 	ahd_lock(ahd, &flags);
2464 	ahd_set_syncrate(ahd, &devinfo, period, offset,
2465 			 ppr_options, AHD_TRANS_GOAL, FALSE);
2466 	ahd_unlock(ahd, &flags);
2467 }
2468 
2469 static void ahd_linux_set_offset(struct scsi_target *starget, int offset)
2470 {
2471 	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2472 	struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2473 	struct ahd_tmode_tstate *tstate;
2474 	struct ahd_initiator_tinfo *tinfo
2475 		= ahd_fetch_transinfo(ahd,
2476 				      starget->channel + 'A',
2477 				      shost->this_id, starget->id, &tstate);
2478 	struct ahd_devinfo devinfo;
2479 	unsigned int ppr_options = 0;
2480 	unsigned int period = 0;
2481 	unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2482 	unsigned long flags;
2483 
2484 #ifdef AHD_DEBUG
2485 	if ((ahd_debug & AHD_SHOW_DV) != 0)
2486 		printf("%s: set offset to %d\n", ahd_name(ahd), offset);
2487 #endif
2488 
2489 	ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2490 			    starget->channel + 'A', ROLE_INITIATOR);
2491 	if (offset != 0) {
2492 		period = tinfo->goal.period;
2493 		ppr_options = tinfo->goal.ppr_options;
2494 		ahd_find_syncrate(ahd, &period, &ppr_options,
2495 				  dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2496 	}
2497 
2498 	ahd_lock(ahd, &flags);
2499 	ahd_set_syncrate(ahd, &devinfo, period, offset, ppr_options,
2500 			 AHD_TRANS_GOAL, FALSE);
2501 	ahd_unlock(ahd, &flags);
2502 }
2503 
2504 static void ahd_linux_set_dt(struct scsi_target *starget, int dt)
2505 {
2506 	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2507 	struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2508 	struct ahd_tmode_tstate *tstate;
2509 	struct ahd_initiator_tinfo *tinfo
2510 		= ahd_fetch_transinfo(ahd,
2511 				      starget->channel + 'A',
2512 				      shost->this_id, starget->id, &tstate);
2513 	struct ahd_devinfo devinfo;
2514 	unsigned int ppr_options = tinfo->goal.ppr_options
2515 		& ~MSG_EXT_PPR_DT_REQ;
2516 	unsigned int period = tinfo->goal.period;
2517 	unsigned int width = tinfo->goal.width;
2518 	unsigned long flags;
2519 
2520 #ifdef AHD_DEBUG
2521 	if ((ahd_debug & AHD_SHOW_DV) != 0)
2522 		printf("%s: %s DT\n", ahd_name(ahd),
2523 		       dt ? "enabling" : "disabling");
2524 #endif
2525 	if (dt && spi_max_width(starget)) {
2526 		ppr_options |= MSG_EXT_PPR_DT_REQ;
2527 		if (!width)
2528 			ahd_linux_set_width(starget, 1);
2529 	} else {
2530 		if (period <= 9)
2531 			period = 10; /* If resetting DT, period must be >= 25ns */
2532 		/* IU is invalid without DT set */
2533 		ppr_options &= ~MSG_EXT_PPR_IU_REQ;
2534 	}
2535 	ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2536 			    starget->channel + 'A', ROLE_INITIATOR);
2537 	ahd_find_syncrate(ahd, &period, &ppr_options,
2538 			  dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2539 
2540 	ahd_lock(ahd, &flags);
2541 	ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2542 			 ppr_options, AHD_TRANS_GOAL, FALSE);
2543 	ahd_unlock(ahd, &flags);
2544 }
2545 
2546 static void ahd_linux_set_qas(struct scsi_target *starget, int qas)
2547 {
2548 	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2549 	struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2550 	struct ahd_tmode_tstate *tstate;
2551 	struct ahd_initiator_tinfo *tinfo
2552 		= ahd_fetch_transinfo(ahd,
2553 				      starget->channel + 'A',
2554 				      shost->this_id, starget->id, &tstate);
2555 	struct ahd_devinfo devinfo;
2556 	unsigned int ppr_options = tinfo->goal.ppr_options
2557 		& ~MSG_EXT_PPR_QAS_REQ;
2558 	unsigned int period = tinfo->goal.period;
2559 	unsigned int dt;
2560 	unsigned long flags;
2561 
2562 #ifdef AHD_DEBUG
2563 	if ((ahd_debug & AHD_SHOW_DV) != 0)
2564 		printf("%s: %s QAS\n", ahd_name(ahd),
2565 		       qas ? "enabling" : "disabling");
2566 #endif
2567 
2568 	if (qas) {
2569 		ppr_options |= MSG_EXT_PPR_QAS_REQ;
2570 	}
2571 
2572 	dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2573 
2574 	ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2575 			    starget->channel + 'A', ROLE_INITIATOR);
2576 	ahd_find_syncrate(ahd, &period, &ppr_options,
2577 			  dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2578 
2579 	ahd_lock(ahd, &flags);
2580 	ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2581 			 ppr_options, AHD_TRANS_GOAL, FALSE);
2582 	ahd_unlock(ahd, &flags);
2583 }
2584 
2585 static void ahd_linux_set_iu(struct scsi_target *starget, int iu)
2586 {
2587 	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2588 	struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2589 	struct ahd_tmode_tstate *tstate;
2590 	struct ahd_initiator_tinfo *tinfo
2591 		= ahd_fetch_transinfo(ahd,
2592 				      starget->channel + 'A',
2593 				      shost->this_id, starget->id, &tstate);
2594 	struct ahd_devinfo devinfo;
2595 	unsigned int ppr_options = tinfo->goal.ppr_options
2596 		& ~MSG_EXT_PPR_IU_REQ;
2597 	unsigned int period = tinfo->goal.period;
2598 	unsigned int dt;
2599 	unsigned long flags;
2600 
2601 #ifdef AHD_DEBUG
2602 	if ((ahd_debug & AHD_SHOW_DV) != 0)
2603 		printf("%s: %s IU\n", ahd_name(ahd),
2604 		       iu ? "enabling" : "disabling");
2605 #endif
2606 
2607 	if (iu && spi_max_width(starget)) {
2608 		ppr_options |= MSG_EXT_PPR_IU_REQ;
2609 		ppr_options |= MSG_EXT_PPR_DT_REQ; /* IU requires DT */
2610 	}
2611 
2612 	dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2613 
2614 	ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2615 			    starget->channel + 'A', ROLE_INITIATOR);
2616 	ahd_find_syncrate(ahd, &period, &ppr_options,
2617 			  dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2618 
2619 	ahd_lock(ahd, &flags);
2620 	ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2621 			 ppr_options, AHD_TRANS_GOAL, FALSE);
2622 	ahd_unlock(ahd, &flags);
2623 }
2624 
2625 static void ahd_linux_set_rd_strm(struct scsi_target *starget, int rdstrm)
2626 {
2627 	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2628 	struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2629 	struct ahd_tmode_tstate *tstate;
2630 	struct ahd_initiator_tinfo *tinfo
2631 		= ahd_fetch_transinfo(ahd,
2632 				      starget->channel + 'A',
2633 				      shost->this_id, starget->id, &tstate);
2634 	struct ahd_devinfo devinfo;
2635 	unsigned int ppr_options = tinfo->goal.ppr_options
2636 		& ~MSG_EXT_PPR_RD_STRM;
2637 	unsigned int period = tinfo->goal.period;
2638 	unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2639 	unsigned long flags;
2640 
2641 #ifdef AHD_DEBUG
2642 	if ((ahd_debug & AHD_SHOW_DV) != 0)
2643 		printf("%s: %s Read Streaming\n", ahd_name(ahd),
2644 		       rdstrm  ? "enabling" : "disabling");
2645 #endif
2646 
2647 	if (rdstrm && spi_max_width(starget))
2648 		ppr_options |= MSG_EXT_PPR_RD_STRM;
2649 
2650 	ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2651 			    starget->channel + 'A', ROLE_INITIATOR);
2652 	ahd_find_syncrate(ahd, &period, &ppr_options,
2653 			  dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2654 
2655 	ahd_lock(ahd, &flags);
2656 	ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2657 			 ppr_options, AHD_TRANS_GOAL, FALSE);
2658 	ahd_unlock(ahd, &flags);
2659 }
2660 
2661 static void ahd_linux_set_wr_flow(struct scsi_target *starget, int wrflow)
2662 {
2663 	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2664 	struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2665 	struct ahd_tmode_tstate *tstate;
2666 	struct ahd_initiator_tinfo *tinfo
2667 		= ahd_fetch_transinfo(ahd,
2668 				      starget->channel + 'A',
2669 				      shost->this_id, starget->id, &tstate);
2670 	struct ahd_devinfo devinfo;
2671 	unsigned int ppr_options = tinfo->goal.ppr_options
2672 		& ~MSG_EXT_PPR_WR_FLOW;
2673 	unsigned int period = tinfo->goal.period;
2674 	unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2675 	unsigned long flags;
2676 
2677 #ifdef AHD_DEBUG
2678 	if ((ahd_debug & AHD_SHOW_DV) != 0)
2679 		printf("%s: %s Write Flow Control\n", ahd_name(ahd),
2680 		       wrflow ? "enabling" : "disabling");
2681 #endif
2682 
2683 	if (wrflow && spi_max_width(starget))
2684 		ppr_options |= MSG_EXT_PPR_WR_FLOW;
2685 
2686 	ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2687 			    starget->channel + 'A', ROLE_INITIATOR);
2688 	ahd_find_syncrate(ahd, &period, &ppr_options,
2689 			  dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2690 
2691 	ahd_lock(ahd, &flags);
2692 	ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2693 			 ppr_options, AHD_TRANS_GOAL, FALSE);
2694 	ahd_unlock(ahd, &flags);
2695 }
2696 
2697 static void ahd_linux_set_rti(struct scsi_target *starget, int rti)
2698 {
2699 	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2700 	struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2701 	struct ahd_tmode_tstate *tstate;
2702 	struct ahd_initiator_tinfo *tinfo
2703 		= ahd_fetch_transinfo(ahd,
2704 				      starget->channel + 'A',
2705 				      shost->this_id, starget->id, &tstate);
2706 	struct ahd_devinfo devinfo;
2707 	unsigned int ppr_options = tinfo->goal.ppr_options
2708 		& ~MSG_EXT_PPR_RTI;
2709 	unsigned int period = tinfo->goal.period;
2710 	unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2711 	unsigned long flags;
2712 
2713 	if ((ahd->features & AHD_RTI) == 0) {
2714 #ifdef AHD_DEBUG
2715 		if ((ahd_debug & AHD_SHOW_DV) != 0)
2716 			printf("%s: RTI not available\n", ahd_name(ahd));
2717 #endif
2718 		return;
2719 	}
2720 
2721 #ifdef AHD_DEBUG
2722 	if ((ahd_debug & AHD_SHOW_DV) != 0)
2723 		printf("%s: %s RTI\n", ahd_name(ahd),
2724 		       rti ? "enabling" : "disabling");
2725 #endif
2726 
2727 	if (rti && spi_max_width(starget))
2728 		ppr_options |= MSG_EXT_PPR_RTI;
2729 
2730 	ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2731 			    starget->channel + 'A', ROLE_INITIATOR);
2732 	ahd_find_syncrate(ahd, &period, &ppr_options,
2733 			  dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2734 
2735 	ahd_lock(ahd, &flags);
2736 	ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2737 			 ppr_options, AHD_TRANS_GOAL, FALSE);
2738 	ahd_unlock(ahd, &flags);
2739 }
2740 
2741 static void ahd_linux_set_pcomp_en(struct scsi_target *starget, int pcomp)
2742 {
2743 	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2744 	struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2745 	struct ahd_tmode_tstate *tstate;
2746 	struct ahd_initiator_tinfo *tinfo
2747 		= ahd_fetch_transinfo(ahd,
2748 				      starget->channel + 'A',
2749 				      shost->this_id, starget->id, &tstate);
2750 	struct ahd_devinfo devinfo;
2751 	unsigned int ppr_options = tinfo->goal.ppr_options
2752 		& ~MSG_EXT_PPR_PCOMP_EN;
2753 	unsigned int period = tinfo->goal.period;
2754 	unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2755 	unsigned long flags;
2756 
2757 #ifdef AHD_DEBUG
2758 	if ((ahd_debug & AHD_SHOW_DV) != 0)
2759 		printf("%s: %s Precompensation\n", ahd_name(ahd),
2760 		       pcomp ? "Enable" : "Disable");
2761 #endif
2762 
2763 	if (pcomp && spi_max_width(starget)) {
2764 		uint8_t precomp;
2765 
2766 		if (ahd->unit < ARRAY_SIZE(aic79xx_iocell_info)) {
2767 			const struct ahd_linux_iocell_opts *iocell_opts;
2768 
2769 			iocell_opts = &aic79xx_iocell_info[ahd->unit];
2770 			precomp = iocell_opts->precomp;
2771 		} else {
2772 			precomp = AIC79XX_DEFAULT_PRECOMP;
2773 		}
2774 		ppr_options |= MSG_EXT_PPR_PCOMP_EN;
2775 		AHD_SET_PRECOMP(ahd, precomp);
2776 	} else {
2777 		AHD_SET_PRECOMP(ahd, 0);
2778 	}
2779 
2780 	ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2781 			    starget->channel + 'A', ROLE_INITIATOR);
2782 	ahd_find_syncrate(ahd, &period, &ppr_options,
2783 			  dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2784 
2785 	ahd_lock(ahd, &flags);
2786 	ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2787 			 ppr_options, AHD_TRANS_GOAL, FALSE);
2788 	ahd_unlock(ahd, &flags);
2789 }
2790 
2791 static void ahd_linux_set_hold_mcs(struct scsi_target *starget, int hold)
2792 {
2793 	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2794 	struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2795 	struct ahd_tmode_tstate *tstate;
2796 	struct ahd_initiator_tinfo *tinfo
2797 		= ahd_fetch_transinfo(ahd,
2798 				      starget->channel + 'A',
2799 				      shost->this_id, starget->id, &tstate);
2800 	struct ahd_devinfo devinfo;
2801 	unsigned int ppr_options = tinfo->goal.ppr_options
2802 		& ~MSG_EXT_PPR_HOLD_MCS;
2803 	unsigned int period = tinfo->goal.period;
2804 	unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2805 	unsigned long flags;
2806 
2807 	if (hold && spi_max_width(starget))
2808 		ppr_options |= MSG_EXT_PPR_HOLD_MCS;
2809 
2810 	ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2811 			    starget->channel + 'A', ROLE_INITIATOR);
2812 	ahd_find_syncrate(ahd, &period, &ppr_options,
2813 			  dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2814 
2815 	ahd_lock(ahd, &flags);
2816 	ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2817 			 ppr_options, AHD_TRANS_GOAL, FALSE);
2818 	ahd_unlock(ahd, &flags);
2819 }
2820 
2821 static void ahd_linux_get_signalling(struct Scsi_Host *shost)
2822 {
2823 	struct ahd_softc *ahd = *(struct ahd_softc **)shost->hostdata;
2824 	unsigned long flags;
2825 	u8 mode;
2826 
2827 	ahd_lock(ahd, &flags);
2828 	ahd_pause(ahd);
2829 	mode = ahd_inb(ahd, SBLKCTL);
2830 	ahd_unpause(ahd);
2831 	ahd_unlock(ahd, &flags);
2832 
2833 	if (mode & ENAB40)
2834 		spi_signalling(shost) = SPI_SIGNAL_LVD;
2835 	else if (mode & ENAB20)
2836 		spi_signalling(shost) = SPI_SIGNAL_SE;
2837 	else
2838 		spi_signalling(shost) = SPI_SIGNAL_UNKNOWN;
2839 }
2840 
2841 static struct spi_function_template ahd_linux_transport_functions = {
2842 	.set_offset	= ahd_linux_set_offset,
2843 	.show_offset	= 1,
2844 	.set_period	= ahd_linux_set_period,
2845 	.show_period	= 1,
2846 	.set_width	= ahd_linux_set_width,
2847 	.show_width	= 1,
2848 	.set_dt		= ahd_linux_set_dt,
2849 	.show_dt	= 1,
2850 	.set_iu		= ahd_linux_set_iu,
2851 	.show_iu	= 1,
2852 	.set_qas	= ahd_linux_set_qas,
2853 	.show_qas	= 1,
2854 	.set_rd_strm	= ahd_linux_set_rd_strm,
2855 	.show_rd_strm	= 1,
2856 	.set_wr_flow	= ahd_linux_set_wr_flow,
2857 	.show_wr_flow	= 1,
2858 	.set_rti	= ahd_linux_set_rti,
2859 	.show_rti	= 1,
2860 	.set_pcomp_en	= ahd_linux_set_pcomp_en,
2861 	.show_pcomp_en	= 1,
2862 	.set_hold_mcs	= ahd_linux_set_hold_mcs,
2863 	.show_hold_mcs	= 1,
2864 	.get_signalling = ahd_linux_get_signalling,
2865 };
2866 
2867 static int __init
2868 ahd_linux_init(void)
2869 {
2870 	int	error = 0;
2871 
2872 	/*
2873 	 * If we've been passed any parameters, process them now.
2874 	 */
2875 	if (aic79xx)
2876 		aic79xx_setup(aic79xx);
2877 
2878 	ahd_linux_transport_template =
2879 		spi_attach_transport(&ahd_linux_transport_functions);
2880 	if (!ahd_linux_transport_template)
2881 		return -ENODEV;
2882 
2883 	scsi_transport_reserve_device(ahd_linux_transport_template,
2884 				      sizeof(struct ahd_linux_device));
2885 
2886 	error = ahd_linux_pci_init();
2887 	if (error)
2888 		spi_release_transport(ahd_linux_transport_template);
2889 	return error;
2890 }
2891 
2892 static void __exit
2893 ahd_linux_exit(void)
2894 {
2895 	ahd_linux_pci_exit();
2896 	spi_release_transport(ahd_linux_transport_template);
2897 }
2898 
2899 module_init(ahd_linux_init);
2900 module_exit(ahd_linux_exit);
2901