1 /* 2 * Core routines and tables shareable across OS platforms. 3 * 4 * Copyright (c) 1994-2002 Justin T. Gibbs. 5 * Copyright (c) 2000-2003 Adaptec Inc. 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions, and the following disclaimer, 13 * without modification. 14 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 15 * substantially similar to the "NO WARRANTY" disclaimer below 16 * ("Disclaimer") and any redistribution must be conditioned upon 17 * including a substantially similar Disclaimer requirement for further 18 * binary redistribution. 19 * 3. Neither the names of the above-listed copyright holders nor the names 20 * of any contributors may be used to endorse or promote products derived 21 * from this software without specific prior written permission. 22 * 23 * Alternatively, this software may be distributed under the terms of the 24 * GNU General Public License ("GPL") version 2 as published by the Free 25 * Software Foundation. 26 * 27 * NO WARRANTY 28 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 29 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 30 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 31 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 32 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 33 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 34 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 35 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 36 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 37 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 38 * POSSIBILITY OF SUCH DAMAGES. 39 * 40 * $Id: //depot/aic7xxx/aic7xxx/aic79xx.c#250 $ 41 */ 42 43 #include "aic79xx_osm.h" 44 #include "aic79xx_inline.h" 45 #include "aicasm/aicasm_insformat.h" 46 47 /***************************** Lookup Tables **********************************/ 48 static const char *const ahd_chip_names[] = 49 { 50 "NONE", 51 "aic7901", 52 "aic7902", 53 "aic7901A" 54 }; 55 56 /* 57 * Hardware error codes. 58 */ 59 struct ahd_hard_error_entry { 60 uint8_t errno; 61 const char *errmesg; 62 }; 63 64 static const struct ahd_hard_error_entry ahd_hard_errors[] = { 65 { DSCTMOUT, "Discard Timer has timed out" }, 66 { ILLOPCODE, "Illegal Opcode in sequencer program" }, 67 { SQPARERR, "Sequencer Parity Error" }, 68 { DPARERR, "Data-path Parity Error" }, 69 { MPARERR, "Scratch or SCB Memory Parity Error" }, 70 { CIOPARERR, "CIOBUS Parity Error" }, 71 }; 72 static const u_int num_errors = ARRAY_SIZE(ahd_hard_errors); 73 74 static const struct ahd_phase_table_entry ahd_phase_table[] = 75 { 76 { P_DATAOUT, MSG_NOOP, "in Data-out phase" }, 77 { P_DATAIN, MSG_INITIATOR_DET_ERR, "in Data-in phase" }, 78 { P_DATAOUT_DT, MSG_NOOP, "in DT Data-out phase" }, 79 { P_DATAIN_DT, MSG_INITIATOR_DET_ERR, "in DT Data-in phase" }, 80 { P_COMMAND, MSG_NOOP, "in Command phase" }, 81 { P_MESGOUT, MSG_NOOP, "in Message-out phase" }, 82 { P_STATUS, MSG_INITIATOR_DET_ERR, "in Status phase" }, 83 { P_MESGIN, MSG_PARITY_ERROR, "in Message-in phase" }, 84 { P_BUSFREE, MSG_NOOP, "while idle" }, 85 { 0, MSG_NOOP, "in unknown phase" } 86 }; 87 88 /* 89 * In most cases we only wish to itterate over real phases, so 90 * exclude the last element from the count. 91 */ 92 static const u_int num_phases = ARRAY_SIZE(ahd_phase_table) - 1; 93 94 /* Our Sequencer Program */ 95 #include "aic79xx_seq.h" 96 97 /**************************** Function Declarations ***************************/ 98 static void ahd_handle_transmission_error(struct ahd_softc *ahd); 99 static void ahd_handle_lqiphase_error(struct ahd_softc *ahd, 100 u_int lqistat1); 101 static int ahd_handle_pkt_busfree(struct ahd_softc *ahd, 102 u_int busfreetime); 103 static int ahd_handle_nonpkt_busfree(struct ahd_softc *ahd); 104 static void ahd_handle_proto_violation(struct ahd_softc *ahd); 105 static void ahd_force_renegotiation(struct ahd_softc *ahd, 106 struct ahd_devinfo *devinfo); 107 108 static struct ahd_tmode_tstate* 109 ahd_alloc_tstate(struct ahd_softc *ahd, 110 u_int scsi_id, char channel); 111 #ifdef AHD_TARGET_MODE 112 static void ahd_free_tstate(struct ahd_softc *ahd, 113 u_int scsi_id, char channel, int force); 114 #endif 115 static void ahd_devlimited_syncrate(struct ahd_softc *ahd, 116 struct ahd_initiator_tinfo *, 117 u_int *period, 118 u_int *ppr_options, 119 role_t role); 120 static void ahd_update_neg_table(struct ahd_softc *ahd, 121 struct ahd_devinfo *devinfo, 122 struct ahd_transinfo *tinfo); 123 static void ahd_update_pending_scbs(struct ahd_softc *ahd); 124 static void ahd_fetch_devinfo(struct ahd_softc *ahd, 125 struct ahd_devinfo *devinfo); 126 static void ahd_scb_devinfo(struct ahd_softc *ahd, 127 struct ahd_devinfo *devinfo, 128 struct scb *scb); 129 static void ahd_setup_initiator_msgout(struct ahd_softc *ahd, 130 struct ahd_devinfo *devinfo, 131 struct scb *scb); 132 static void ahd_build_transfer_msg(struct ahd_softc *ahd, 133 struct ahd_devinfo *devinfo); 134 static void ahd_construct_sdtr(struct ahd_softc *ahd, 135 struct ahd_devinfo *devinfo, 136 u_int period, u_int offset); 137 static void ahd_construct_wdtr(struct ahd_softc *ahd, 138 struct ahd_devinfo *devinfo, 139 u_int bus_width); 140 static void ahd_construct_ppr(struct ahd_softc *ahd, 141 struct ahd_devinfo *devinfo, 142 u_int period, u_int offset, 143 u_int bus_width, u_int ppr_options); 144 static void ahd_clear_msg_state(struct ahd_softc *ahd); 145 static void ahd_handle_message_phase(struct ahd_softc *ahd); 146 typedef enum { 147 AHDMSG_1B, 148 AHDMSG_2B, 149 AHDMSG_EXT 150 } ahd_msgtype; 151 static int ahd_sent_msg(struct ahd_softc *ahd, ahd_msgtype type, 152 u_int msgval, int full); 153 static int ahd_parse_msg(struct ahd_softc *ahd, 154 struct ahd_devinfo *devinfo); 155 static int ahd_handle_msg_reject(struct ahd_softc *ahd, 156 struct ahd_devinfo *devinfo); 157 static void ahd_handle_ign_wide_residue(struct ahd_softc *ahd, 158 struct ahd_devinfo *devinfo); 159 static void ahd_reinitialize_dataptrs(struct ahd_softc *ahd); 160 static void ahd_handle_devreset(struct ahd_softc *ahd, 161 struct ahd_devinfo *devinfo, 162 u_int lun, cam_status status, 163 char *message, int verbose_level); 164 #ifdef AHD_TARGET_MODE 165 static void ahd_setup_target_msgin(struct ahd_softc *ahd, 166 struct ahd_devinfo *devinfo, 167 struct scb *scb); 168 #endif 169 170 static u_int ahd_sglist_size(struct ahd_softc *ahd); 171 static u_int ahd_sglist_allocsize(struct ahd_softc *ahd); 172 static bus_dmamap_callback_t 173 ahd_dmamap_cb; 174 static void ahd_initialize_hscbs(struct ahd_softc *ahd); 175 static int ahd_init_scbdata(struct ahd_softc *ahd); 176 static void ahd_fini_scbdata(struct ahd_softc *ahd); 177 static void ahd_setup_iocell_workaround(struct ahd_softc *ahd); 178 static void ahd_iocell_first_selection(struct ahd_softc *ahd); 179 static void ahd_add_col_list(struct ahd_softc *ahd, 180 struct scb *scb, u_int col_idx); 181 static void ahd_rem_col_list(struct ahd_softc *ahd, 182 struct scb *scb); 183 static void ahd_chip_init(struct ahd_softc *ahd); 184 static void ahd_qinfifo_requeue(struct ahd_softc *ahd, 185 struct scb *prev_scb, 186 struct scb *scb); 187 static int ahd_qinfifo_count(struct ahd_softc *ahd); 188 static int ahd_search_scb_list(struct ahd_softc *ahd, int target, 189 char channel, int lun, u_int tag, 190 role_t role, uint32_t status, 191 ahd_search_action action, 192 u_int *list_head, u_int *list_tail, 193 u_int tid); 194 static void ahd_stitch_tid_list(struct ahd_softc *ahd, 195 u_int tid_prev, u_int tid_cur, 196 u_int tid_next); 197 static void ahd_add_scb_to_free_list(struct ahd_softc *ahd, 198 u_int scbid); 199 static u_int ahd_rem_wscb(struct ahd_softc *ahd, u_int scbid, 200 u_int prev, u_int next, u_int tid); 201 static void ahd_reset_current_bus(struct ahd_softc *ahd); 202 static void ahd_stat_timer(struct timer_list *t); 203 #ifdef AHD_DUMP_SEQ 204 static void ahd_dumpseq(struct ahd_softc *ahd); 205 #endif 206 static void ahd_loadseq(struct ahd_softc *ahd); 207 static int ahd_check_patch(struct ahd_softc *ahd, 208 const struct patch **start_patch, 209 u_int start_instr, u_int *skip_addr); 210 static u_int ahd_resolve_seqaddr(struct ahd_softc *ahd, 211 u_int address); 212 static void ahd_download_instr(struct ahd_softc *ahd, 213 u_int instrptr, uint8_t *dconsts); 214 static int ahd_probe_stack_size(struct ahd_softc *ahd); 215 static int ahd_scb_active_in_fifo(struct ahd_softc *ahd, 216 struct scb *scb); 217 static void ahd_run_data_fifo(struct ahd_softc *ahd, 218 struct scb *scb); 219 220 #ifdef AHD_TARGET_MODE 221 static void ahd_queue_lstate_event(struct ahd_softc *ahd, 222 struct ahd_tmode_lstate *lstate, 223 u_int initiator_id, 224 u_int event_type, 225 u_int event_arg); 226 static void ahd_update_scsiid(struct ahd_softc *ahd, 227 u_int targid_mask); 228 static int ahd_handle_target_cmd(struct ahd_softc *ahd, 229 struct target_cmd *cmd); 230 #endif 231 232 static int ahd_abort_scbs(struct ahd_softc *ahd, int target, 233 char channel, int lun, u_int tag, 234 role_t role, uint32_t status); 235 static void ahd_alloc_scbs(struct ahd_softc *ahd); 236 static void ahd_busy_tcl(struct ahd_softc *ahd, u_int tcl, 237 u_int scbid); 238 static void ahd_calc_residual(struct ahd_softc *ahd, 239 struct scb *scb); 240 static void ahd_clear_critical_section(struct ahd_softc *ahd); 241 static void ahd_clear_intstat(struct ahd_softc *ahd); 242 static void ahd_enable_coalescing(struct ahd_softc *ahd, 243 int enable); 244 static u_int ahd_find_busy_tcl(struct ahd_softc *ahd, u_int tcl); 245 static void ahd_freeze_devq(struct ahd_softc *ahd, 246 struct scb *scb); 247 static void ahd_handle_scb_status(struct ahd_softc *ahd, 248 struct scb *scb); 249 static const struct ahd_phase_table_entry* ahd_lookup_phase_entry(int phase); 250 static void ahd_shutdown(void *arg); 251 static void ahd_update_coalescing_values(struct ahd_softc *ahd, 252 u_int timer, 253 u_int maxcmds, 254 u_int mincmds); 255 static int ahd_verify_vpd_cksum(struct vpd_config *vpd); 256 static int ahd_wait_seeprom(struct ahd_softc *ahd); 257 static int ahd_match_scb(struct ahd_softc *ahd, struct scb *scb, 258 int target, char channel, int lun, 259 u_int tag, role_t role); 260 261 static void ahd_reset_cmds_pending(struct ahd_softc *ahd); 262 263 /*************************** Interrupt Services *******************************/ 264 static void ahd_run_qoutfifo(struct ahd_softc *ahd); 265 #ifdef AHD_TARGET_MODE 266 static void ahd_run_tqinfifo(struct ahd_softc *ahd, int paused); 267 #endif 268 static void ahd_handle_hwerrint(struct ahd_softc *ahd); 269 static void ahd_handle_seqint(struct ahd_softc *ahd, u_int intstat); 270 static void ahd_handle_scsiint(struct ahd_softc *ahd, 271 u_int intstat); 272 273 /************************ Sequencer Execution Control *************************/ 274 void 275 ahd_set_modes(struct ahd_softc *ahd, ahd_mode src, ahd_mode dst) 276 { 277 if (ahd->src_mode == src && ahd->dst_mode == dst) 278 return; 279 #ifdef AHD_DEBUG 280 if (ahd->src_mode == AHD_MODE_UNKNOWN 281 || ahd->dst_mode == AHD_MODE_UNKNOWN) 282 panic("Setting mode prior to saving it.\n"); 283 if ((ahd_debug & AHD_SHOW_MODEPTR) != 0) 284 printk("%s: Setting mode 0x%x\n", ahd_name(ahd), 285 ahd_build_mode_state(ahd, src, dst)); 286 #endif 287 ahd_outb(ahd, MODE_PTR, ahd_build_mode_state(ahd, src, dst)); 288 ahd->src_mode = src; 289 ahd->dst_mode = dst; 290 } 291 292 static void 293 ahd_update_modes(struct ahd_softc *ahd) 294 { 295 ahd_mode_state mode_ptr; 296 ahd_mode src; 297 ahd_mode dst; 298 299 mode_ptr = ahd_inb(ahd, MODE_PTR); 300 #ifdef AHD_DEBUG 301 if ((ahd_debug & AHD_SHOW_MODEPTR) != 0) 302 printk("Reading mode 0x%x\n", mode_ptr); 303 #endif 304 ahd_extract_mode_state(ahd, mode_ptr, &src, &dst); 305 ahd_known_modes(ahd, src, dst); 306 } 307 308 static void 309 ahd_assert_modes(struct ahd_softc *ahd, ahd_mode srcmode, 310 ahd_mode dstmode, const char *file, int line) 311 { 312 #ifdef AHD_DEBUG 313 if ((srcmode & AHD_MK_MSK(ahd->src_mode)) == 0 314 || (dstmode & AHD_MK_MSK(ahd->dst_mode)) == 0) { 315 panic("%s:%s:%d: Mode assertion failed.\n", 316 ahd_name(ahd), file, line); 317 } 318 #endif 319 } 320 321 #define AHD_ASSERT_MODES(ahd, source, dest) \ 322 ahd_assert_modes(ahd, source, dest, __FILE__, __LINE__); 323 324 ahd_mode_state 325 ahd_save_modes(struct ahd_softc *ahd) 326 { 327 if (ahd->src_mode == AHD_MODE_UNKNOWN 328 || ahd->dst_mode == AHD_MODE_UNKNOWN) 329 ahd_update_modes(ahd); 330 331 return (ahd_build_mode_state(ahd, ahd->src_mode, ahd->dst_mode)); 332 } 333 334 void 335 ahd_restore_modes(struct ahd_softc *ahd, ahd_mode_state state) 336 { 337 ahd_mode src; 338 ahd_mode dst; 339 340 ahd_extract_mode_state(ahd, state, &src, &dst); 341 ahd_set_modes(ahd, src, dst); 342 } 343 344 /* 345 * Determine whether the sequencer has halted code execution. 346 * Returns non-zero status if the sequencer is stopped. 347 */ 348 int 349 ahd_is_paused(struct ahd_softc *ahd) 350 { 351 return ((ahd_inb(ahd, HCNTRL) & PAUSE) != 0); 352 } 353 354 /* 355 * Request that the sequencer stop and wait, indefinitely, for it 356 * to stop. The sequencer will only acknowledge that it is paused 357 * once it has reached an instruction boundary and PAUSEDIS is 358 * cleared in the SEQCTL register. The sequencer may use PAUSEDIS 359 * for critical sections. 360 */ 361 void 362 ahd_pause(struct ahd_softc *ahd) 363 { 364 ahd_outb(ahd, HCNTRL, ahd->pause); 365 366 /* 367 * Since the sequencer can disable pausing in a critical section, we 368 * must loop until it actually stops. 369 */ 370 while (ahd_is_paused(ahd) == 0) 371 ; 372 } 373 374 /* 375 * Allow the sequencer to continue program execution. 376 * We check here to ensure that no additional interrupt 377 * sources that would cause the sequencer to halt have been 378 * asserted. If, for example, a SCSI bus reset is detected 379 * while we are fielding a different, pausing, interrupt type, 380 * we don't want to release the sequencer before going back 381 * into our interrupt handler and dealing with this new 382 * condition. 383 */ 384 void 385 ahd_unpause(struct ahd_softc *ahd) 386 { 387 /* 388 * Automatically restore our modes to those saved 389 * prior to the first change of the mode. 390 */ 391 if (ahd->saved_src_mode != AHD_MODE_UNKNOWN 392 && ahd->saved_dst_mode != AHD_MODE_UNKNOWN) { 393 if ((ahd->flags & AHD_UPDATE_PEND_CMDS) != 0) 394 ahd_reset_cmds_pending(ahd); 395 ahd_set_modes(ahd, ahd->saved_src_mode, ahd->saved_dst_mode); 396 } 397 398 if ((ahd_inb(ahd, INTSTAT) & ~CMDCMPLT) == 0) 399 ahd_outb(ahd, HCNTRL, ahd->unpause); 400 401 ahd_known_modes(ahd, AHD_MODE_UNKNOWN, AHD_MODE_UNKNOWN); 402 } 403 404 /*********************** Scatter Gather List Handling *************************/ 405 void * 406 ahd_sg_setup(struct ahd_softc *ahd, struct scb *scb, 407 void *sgptr, dma_addr_t addr, bus_size_t len, int last) 408 { 409 scb->sg_count++; 410 if (sizeof(dma_addr_t) > 4 411 && (ahd->flags & AHD_64BIT_ADDRESSING) != 0) { 412 struct ahd_dma64_seg *sg; 413 414 sg = (struct ahd_dma64_seg *)sgptr; 415 sg->addr = ahd_htole64(addr); 416 sg->len = ahd_htole32(len | (last ? AHD_DMA_LAST_SEG : 0)); 417 return (sg + 1); 418 } else { 419 struct ahd_dma_seg *sg; 420 421 sg = (struct ahd_dma_seg *)sgptr; 422 sg->addr = ahd_htole32(addr & 0xFFFFFFFF); 423 sg->len = ahd_htole32(len | ((addr >> 8) & 0x7F000000) 424 | (last ? AHD_DMA_LAST_SEG : 0)); 425 return (sg + 1); 426 } 427 } 428 429 static void 430 ahd_setup_scb_common(struct ahd_softc *ahd, struct scb *scb) 431 { 432 /* XXX Handle target mode SCBs. */ 433 scb->crc_retry_count = 0; 434 if ((scb->flags & SCB_PACKETIZED) != 0) { 435 /* XXX what about ACA?? It is type 4, but TAG_TYPE == 0x3. */ 436 scb->hscb->task_attribute = scb->hscb->control & SCB_TAG_TYPE; 437 } else { 438 if (ahd_get_transfer_length(scb) & 0x01) 439 scb->hscb->task_attribute = SCB_XFERLEN_ODD; 440 else 441 scb->hscb->task_attribute = 0; 442 } 443 444 if (scb->hscb->cdb_len <= MAX_CDB_LEN_WITH_SENSE_ADDR 445 || (scb->hscb->cdb_len & SCB_CDB_LEN_PTR) != 0) 446 scb->hscb->shared_data.idata.cdb_plus_saddr.sense_addr = 447 ahd_htole32(scb->sense_busaddr); 448 } 449 450 static void 451 ahd_setup_data_scb(struct ahd_softc *ahd, struct scb *scb) 452 { 453 /* 454 * Copy the first SG into the "current" data ponter area. 455 */ 456 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) { 457 struct ahd_dma64_seg *sg; 458 459 sg = (struct ahd_dma64_seg *)scb->sg_list; 460 scb->hscb->dataptr = sg->addr; 461 scb->hscb->datacnt = sg->len; 462 } else { 463 struct ahd_dma_seg *sg; 464 uint32_t *dataptr_words; 465 466 sg = (struct ahd_dma_seg *)scb->sg_list; 467 dataptr_words = (uint32_t*)&scb->hscb->dataptr; 468 dataptr_words[0] = sg->addr; 469 dataptr_words[1] = 0; 470 if ((ahd->flags & AHD_39BIT_ADDRESSING) != 0) { 471 uint64_t high_addr; 472 473 high_addr = ahd_le32toh(sg->len) & 0x7F000000; 474 scb->hscb->dataptr |= ahd_htole64(high_addr << 8); 475 } 476 scb->hscb->datacnt = sg->len; 477 } 478 /* 479 * Note where to find the SG entries in bus space. 480 * We also set the full residual flag which the 481 * sequencer will clear as soon as a data transfer 482 * occurs. 483 */ 484 scb->hscb->sgptr = ahd_htole32(scb->sg_list_busaddr|SG_FULL_RESID); 485 } 486 487 static void 488 ahd_setup_noxfer_scb(struct ahd_softc *ahd, struct scb *scb) 489 { 490 scb->hscb->sgptr = ahd_htole32(SG_LIST_NULL); 491 scb->hscb->dataptr = 0; 492 scb->hscb->datacnt = 0; 493 } 494 495 /************************** Memory mapping routines ***************************/ 496 static void * 497 ahd_sg_bus_to_virt(struct ahd_softc *ahd, struct scb *scb, uint32_t sg_busaddr) 498 { 499 dma_addr_t sg_offset; 500 501 /* sg_list_phys points to entry 1, not 0 */ 502 sg_offset = sg_busaddr - (scb->sg_list_busaddr - ahd_sg_size(ahd)); 503 return ((uint8_t *)scb->sg_list + sg_offset); 504 } 505 506 static uint32_t 507 ahd_sg_virt_to_bus(struct ahd_softc *ahd, struct scb *scb, void *sg) 508 { 509 dma_addr_t sg_offset; 510 511 /* sg_list_phys points to entry 1, not 0 */ 512 sg_offset = ((uint8_t *)sg - (uint8_t *)scb->sg_list) 513 - ahd_sg_size(ahd); 514 515 return (scb->sg_list_busaddr + sg_offset); 516 } 517 518 static void 519 ahd_sync_scb(struct ahd_softc *ahd, struct scb *scb, int op) 520 { 521 ahd_dmamap_sync(ahd, ahd->scb_data.hscb_dmat, 522 scb->hscb_map->dmamap, 523 /*offset*/(uint8_t*)scb->hscb - scb->hscb_map->vaddr, 524 /*len*/sizeof(*scb->hscb), op); 525 } 526 527 void 528 ahd_sync_sglist(struct ahd_softc *ahd, struct scb *scb, int op) 529 { 530 if (scb->sg_count == 0) 531 return; 532 533 ahd_dmamap_sync(ahd, ahd->scb_data.sg_dmat, 534 scb->sg_map->dmamap, 535 /*offset*/scb->sg_list_busaddr - ahd_sg_size(ahd), 536 /*len*/ahd_sg_size(ahd) * scb->sg_count, op); 537 } 538 539 static void 540 ahd_sync_sense(struct ahd_softc *ahd, struct scb *scb, int op) 541 { 542 ahd_dmamap_sync(ahd, ahd->scb_data.sense_dmat, 543 scb->sense_map->dmamap, 544 /*offset*/scb->sense_busaddr, 545 /*len*/AHD_SENSE_BUFSIZE, op); 546 } 547 548 #ifdef AHD_TARGET_MODE 549 static uint32_t 550 ahd_targetcmd_offset(struct ahd_softc *ahd, u_int index) 551 { 552 return (((uint8_t *)&ahd->targetcmds[index]) 553 - (uint8_t *)ahd->qoutfifo); 554 } 555 #endif 556 557 /*********************** Miscellaneous Support Functions ***********************/ 558 /* 559 * Return pointers to the transfer negotiation information 560 * for the specified our_id/remote_id pair. 561 */ 562 struct ahd_initiator_tinfo * 563 ahd_fetch_transinfo(struct ahd_softc *ahd, char channel, u_int our_id, 564 u_int remote_id, struct ahd_tmode_tstate **tstate) 565 { 566 /* 567 * Transfer data structures are stored from the perspective 568 * of the target role. Since the parameters for a connection 569 * in the initiator role to a given target are the same as 570 * when the roles are reversed, we pretend we are the target. 571 */ 572 if (channel == 'B') 573 our_id += 8; 574 *tstate = ahd->enabled_targets[our_id]; 575 return (&(*tstate)->transinfo[remote_id]); 576 } 577 578 uint16_t 579 ahd_inw(struct ahd_softc *ahd, u_int port) 580 { 581 /* 582 * Read high byte first as some registers increment 583 * or have other side effects when the low byte is 584 * read. 585 */ 586 uint16_t r = ahd_inb(ahd, port+1) << 8; 587 return r | ahd_inb(ahd, port); 588 } 589 590 void 591 ahd_outw(struct ahd_softc *ahd, u_int port, u_int value) 592 { 593 /* 594 * Write low byte first to accommodate registers 595 * such as PRGMCNT where the order maters. 596 */ 597 ahd_outb(ahd, port, value & 0xFF); 598 ahd_outb(ahd, port+1, (value >> 8) & 0xFF); 599 } 600 601 uint32_t 602 ahd_inl(struct ahd_softc *ahd, u_int port) 603 { 604 return ((ahd_inb(ahd, port)) 605 | (ahd_inb(ahd, port+1) << 8) 606 | (ahd_inb(ahd, port+2) << 16) 607 | (ahd_inb(ahd, port+3) << 24)); 608 } 609 610 void 611 ahd_outl(struct ahd_softc *ahd, u_int port, uint32_t value) 612 { 613 ahd_outb(ahd, port, (value) & 0xFF); 614 ahd_outb(ahd, port+1, ((value) >> 8) & 0xFF); 615 ahd_outb(ahd, port+2, ((value) >> 16) & 0xFF); 616 ahd_outb(ahd, port+3, ((value) >> 24) & 0xFF); 617 } 618 619 uint64_t 620 ahd_inq(struct ahd_softc *ahd, u_int port) 621 { 622 return ((ahd_inb(ahd, port)) 623 | (ahd_inb(ahd, port+1) << 8) 624 | (ahd_inb(ahd, port+2) << 16) 625 | (ahd_inb(ahd, port+3) << 24) 626 | (((uint64_t)ahd_inb(ahd, port+4)) << 32) 627 | (((uint64_t)ahd_inb(ahd, port+5)) << 40) 628 | (((uint64_t)ahd_inb(ahd, port+6)) << 48) 629 | (((uint64_t)ahd_inb(ahd, port+7)) << 56)); 630 } 631 632 void 633 ahd_outq(struct ahd_softc *ahd, u_int port, uint64_t value) 634 { 635 ahd_outb(ahd, port, value & 0xFF); 636 ahd_outb(ahd, port+1, (value >> 8) & 0xFF); 637 ahd_outb(ahd, port+2, (value >> 16) & 0xFF); 638 ahd_outb(ahd, port+3, (value >> 24) & 0xFF); 639 ahd_outb(ahd, port+4, (value >> 32) & 0xFF); 640 ahd_outb(ahd, port+5, (value >> 40) & 0xFF); 641 ahd_outb(ahd, port+6, (value >> 48) & 0xFF); 642 ahd_outb(ahd, port+7, (value >> 56) & 0xFF); 643 } 644 645 u_int 646 ahd_get_scbptr(struct ahd_softc *ahd) 647 { 648 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK), 649 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK)); 650 return (ahd_inb(ahd, SCBPTR) | (ahd_inb(ahd, SCBPTR + 1) << 8)); 651 } 652 653 void 654 ahd_set_scbptr(struct ahd_softc *ahd, u_int scbptr) 655 { 656 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK), 657 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK)); 658 ahd_outb(ahd, SCBPTR, scbptr & 0xFF); 659 ahd_outb(ahd, SCBPTR+1, (scbptr >> 8) & 0xFF); 660 } 661 662 #if 0 /* unused */ 663 static u_int 664 ahd_get_hnscb_qoff(struct ahd_softc *ahd) 665 { 666 return (ahd_inw_atomic(ahd, HNSCB_QOFF)); 667 } 668 #endif 669 670 static void 671 ahd_set_hnscb_qoff(struct ahd_softc *ahd, u_int value) 672 { 673 ahd_outw_atomic(ahd, HNSCB_QOFF, value); 674 } 675 676 #if 0 /* unused */ 677 static u_int 678 ahd_get_hescb_qoff(struct ahd_softc *ahd) 679 { 680 return (ahd_inb(ahd, HESCB_QOFF)); 681 } 682 #endif 683 684 static void 685 ahd_set_hescb_qoff(struct ahd_softc *ahd, u_int value) 686 { 687 ahd_outb(ahd, HESCB_QOFF, value); 688 } 689 690 static u_int 691 ahd_get_snscb_qoff(struct ahd_softc *ahd) 692 { 693 u_int oldvalue; 694 695 AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK); 696 oldvalue = ahd_inw(ahd, SNSCB_QOFF); 697 ahd_outw(ahd, SNSCB_QOFF, oldvalue); 698 return (oldvalue); 699 } 700 701 static void 702 ahd_set_snscb_qoff(struct ahd_softc *ahd, u_int value) 703 { 704 AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK); 705 ahd_outw(ahd, SNSCB_QOFF, value); 706 } 707 708 #if 0 /* unused */ 709 static u_int 710 ahd_get_sescb_qoff(struct ahd_softc *ahd) 711 { 712 AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK); 713 return (ahd_inb(ahd, SESCB_QOFF)); 714 } 715 #endif 716 717 static void 718 ahd_set_sescb_qoff(struct ahd_softc *ahd, u_int value) 719 { 720 AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK); 721 ahd_outb(ahd, SESCB_QOFF, value); 722 } 723 724 #if 0 /* unused */ 725 static u_int 726 ahd_get_sdscb_qoff(struct ahd_softc *ahd) 727 { 728 AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK); 729 return (ahd_inb(ahd, SDSCB_QOFF) | (ahd_inb(ahd, SDSCB_QOFF + 1) << 8)); 730 } 731 #endif 732 733 static void 734 ahd_set_sdscb_qoff(struct ahd_softc *ahd, u_int value) 735 { 736 AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK); 737 ahd_outb(ahd, SDSCB_QOFF, value & 0xFF); 738 ahd_outb(ahd, SDSCB_QOFF+1, (value >> 8) & 0xFF); 739 } 740 741 u_int 742 ahd_inb_scbram(struct ahd_softc *ahd, u_int offset) 743 { 744 u_int value; 745 746 /* 747 * Workaround PCI-X Rev A. hardware bug. 748 * After a host read of SCB memory, the chip 749 * may become confused into thinking prefetch 750 * was required. This starts the discard timer 751 * running and can cause an unexpected discard 752 * timer interrupt. The work around is to read 753 * a normal register prior to the exhaustion of 754 * the discard timer. The mode pointer register 755 * has no side effects and so serves well for 756 * this purpose. 757 * 758 * Razor #528 759 */ 760 value = ahd_inb(ahd, offset); 761 if ((ahd->bugs & AHD_PCIX_SCBRAM_RD_BUG) != 0) 762 ahd_inb(ahd, MODE_PTR); 763 return (value); 764 } 765 766 u_int 767 ahd_inw_scbram(struct ahd_softc *ahd, u_int offset) 768 { 769 return (ahd_inb_scbram(ahd, offset) 770 | (ahd_inb_scbram(ahd, offset+1) << 8)); 771 } 772 773 static uint32_t 774 ahd_inl_scbram(struct ahd_softc *ahd, u_int offset) 775 { 776 return (ahd_inw_scbram(ahd, offset) 777 | (ahd_inw_scbram(ahd, offset+2) << 16)); 778 } 779 780 static uint64_t 781 ahd_inq_scbram(struct ahd_softc *ahd, u_int offset) 782 { 783 return (ahd_inl_scbram(ahd, offset) 784 | ((uint64_t)ahd_inl_scbram(ahd, offset+4)) << 32); 785 } 786 787 struct scb * 788 ahd_lookup_scb(struct ahd_softc *ahd, u_int tag) 789 { 790 struct scb* scb; 791 792 if (tag >= AHD_SCB_MAX) 793 return (NULL); 794 scb = ahd->scb_data.scbindex[tag]; 795 if (scb != NULL) 796 ahd_sync_scb(ahd, scb, 797 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 798 return (scb); 799 } 800 801 static void 802 ahd_swap_with_next_hscb(struct ahd_softc *ahd, struct scb *scb) 803 { 804 struct hardware_scb *q_hscb; 805 struct map_node *q_hscb_map; 806 uint32_t saved_hscb_busaddr; 807 808 /* 809 * Our queuing method is a bit tricky. The card 810 * knows in advance which HSCB (by address) to download, 811 * and we can't disappoint it. To achieve this, the next 812 * HSCB to download is saved off in ahd->next_queued_hscb. 813 * When we are called to queue "an arbitrary scb", 814 * we copy the contents of the incoming HSCB to the one 815 * the sequencer knows about, swap HSCB pointers and 816 * finally assign the SCB to the tag indexed location 817 * in the scb_array. This makes sure that we can still 818 * locate the correct SCB by SCB_TAG. 819 */ 820 q_hscb = ahd->next_queued_hscb; 821 q_hscb_map = ahd->next_queued_hscb_map; 822 saved_hscb_busaddr = q_hscb->hscb_busaddr; 823 memcpy(q_hscb, scb->hscb, sizeof(*scb->hscb)); 824 q_hscb->hscb_busaddr = saved_hscb_busaddr; 825 q_hscb->next_hscb_busaddr = scb->hscb->hscb_busaddr; 826 827 /* Now swap HSCB pointers. */ 828 ahd->next_queued_hscb = scb->hscb; 829 ahd->next_queued_hscb_map = scb->hscb_map; 830 scb->hscb = q_hscb; 831 scb->hscb_map = q_hscb_map; 832 833 /* Now define the mapping from tag to SCB in the scbindex */ 834 ahd->scb_data.scbindex[SCB_GET_TAG(scb)] = scb; 835 } 836 837 /* 838 * Tell the sequencer about a new transaction to execute. 839 */ 840 void 841 ahd_queue_scb(struct ahd_softc *ahd, struct scb *scb) 842 { 843 ahd_swap_with_next_hscb(ahd, scb); 844 845 if (SCBID_IS_NULL(SCB_GET_TAG(scb))) 846 panic("Attempt to queue invalid SCB tag %x\n", 847 SCB_GET_TAG(scb)); 848 849 /* 850 * Keep a history of SCBs we've downloaded in the qinfifo. 851 */ 852 ahd->qinfifo[AHD_QIN_WRAP(ahd->qinfifonext)] = SCB_GET_TAG(scb); 853 ahd->qinfifonext++; 854 855 if (scb->sg_count != 0) 856 ahd_setup_data_scb(ahd, scb); 857 else 858 ahd_setup_noxfer_scb(ahd, scb); 859 ahd_setup_scb_common(ahd, scb); 860 861 /* 862 * Make sure our data is consistent from the 863 * perspective of the adapter. 864 */ 865 ahd_sync_scb(ahd, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 866 867 #ifdef AHD_DEBUG 868 if ((ahd_debug & AHD_SHOW_QUEUE) != 0) { 869 uint64_t host_dataptr; 870 871 host_dataptr = ahd_le64toh(scb->hscb->dataptr); 872 printk("%s: Queueing SCB %d:0x%x bus addr 0x%x - 0x%x%x/0x%x\n", 873 ahd_name(ahd), 874 SCB_GET_TAG(scb), scb->hscb->scsiid, 875 ahd_le32toh(scb->hscb->hscb_busaddr), 876 (u_int)((host_dataptr >> 32) & 0xFFFFFFFF), 877 (u_int)(host_dataptr & 0xFFFFFFFF), 878 ahd_le32toh(scb->hscb->datacnt)); 879 } 880 #endif 881 /* Tell the adapter about the newly queued SCB */ 882 ahd_set_hnscb_qoff(ahd, ahd->qinfifonext); 883 } 884 885 /************************** Interrupt Processing ******************************/ 886 static void 887 ahd_sync_qoutfifo(struct ahd_softc *ahd, int op) 888 { 889 ahd_dmamap_sync(ahd, ahd->shared_data_dmat, ahd->shared_data_map.dmamap, 890 /*offset*/0, 891 /*len*/AHD_SCB_MAX * sizeof(struct ahd_completion), op); 892 } 893 894 static void 895 ahd_sync_tqinfifo(struct ahd_softc *ahd, int op) 896 { 897 #ifdef AHD_TARGET_MODE 898 if ((ahd->flags & AHD_TARGETROLE) != 0) { 899 ahd_dmamap_sync(ahd, ahd->shared_data_dmat, 900 ahd->shared_data_map.dmamap, 901 ahd_targetcmd_offset(ahd, 0), 902 sizeof(struct target_cmd) * AHD_TMODE_CMDS, 903 op); 904 } 905 #endif 906 } 907 908 /* 909 * See if the firmware has posted any completed commands 910 * into our in-core command complete fifos. 911 */ 912 #define AHD_RUN_QOUTFIFO 0x1 913 #define AHD_RUN_TQINFIFO 0x2 914 static u_int 915 ahd_check_cmdcmpltqueues(struct ahd_softc *ahd) 916 { 917 u_int retval; 918 919 retval = 0; 920 ahd_dmamap_sync(ahd, ahd->shared_data_dmat, ahd->shared_data_map.dmamap, 921 /*offset*/ahd->qoutfifonext * sizeof(*ahd->qoutfifo), 922 /*len*/sizeof(*ahd->qoutfifo), BUS_DMASYNC_POSTREAD); 923 if (ahd->qoutfifo[ahd->qoutfifonext].valid_tag 924 == ahd->qoutfifonext_valid_tag) 925 retval |= AHD_RUN_QOUTFIFO; 926 #ifdef AHD_TARGET_MODE 927 if ((ahd->flags & AHD_TARGETROLE) != 0 928 && (ahd->flags & AHD_TQINFIFO_BLOCKED) == 0) { 929 ahd_dmamap_sync(ahd, ahd->shared_data_dmat, 930 ahd->shared_data_map.dmamap, 931 ahd_targetcmd_offset(ahd, ahd->tqinfifofnext), 932 /*len*/sizeof(struct target_cmd), 933 BUS_DMASYNC_POSTREAD); 934 if (ahd->targetcmds[ahd->tqinfifonext].cmd_valid != 0) 935 retval |= AHD_RUN_TQINFIFO; 936 } 937 #endif 938 return (retval); 939 } 940 941 /* 942 * Catch an interrupt from the adapter 943 */ 944 int 945 ahd_intr(struct ahd_softc *ahd) 946 { 947 u_int intstat; 948 949 if ((ahd->pause & INTEN) == 0) { 950 /* 951 * Our interrupt is not enabled on the chip 952 * and may be disabled for re-entrancy reasons, 953 * so just return. This is likely just a shared 954 * interrupt. 955 */ 956 return (0); 957 } 958 959 /* 960 * Instead of directly reading the interrupt status register, 961 * infer the cause of the interrupt by checking our in-core 962 * completion queues. This avoids a costly PCI bus read in 963 * most cases. 964 */ 965 if ((ahd->flags & AHD_ALL_INTERRUPTS) == 0 966 && (ahd_check_cmdcmpltqueues(ahd) != 0)) 967 intstat = CMDCMPLT; 968 else 969 intstat = ahd_inb(ahd, INTSTAT); 970 971 if ((intstat & INT_PEND) == 0) 972 return (0); 973 974 if (intstat & CMDCMPLT) { 975 ahd_outb(ahd, CLRINT, CLRCMDINT); 976 977 /* 978 * Ensure that the chip sees that we've cleared 979 * this interrupt before we walk the output fifo. 980 * Otherwise, we may, due to posted bus writes, 981 * clear the interrupt after we finish the scan, 982 * and after the sequencer has added new entries 983 * and asserted the interrupt again. 984 */ 985 if ((ahd->bugs & AHD_INTCOLLISION_BUG) != 0) { 986 if (ahd_is_paused(ahd)) { 987 /* 988 * Potentially lost SEQINT. 989 * If SEQINTCODE is non-zero, 990 * simulate the SEQINT. 991 */ 992 if (ahd_inb(ahd, SEQINTCODE) != NO_SEQINT) 993 intstat |= SEQINT; 994 } 995 } else { 996 ahd_flush_device_writes(ahd); 997 } 998 ahd_run_qoutfifo(ahd); 999 ahd->cmdcmplt_counts[ahd->cmdcmplt_bucket]++; 1000 ahd->cmdcmplt_total++; 1001 #ifdef AHD_TARGET_MODE 1002 if ((ahd->flags & AHD_TARGETROLE) != 0) 1003 ahd_run_tqinfifo(ahd, /*paused*/FALSE); 1004 #endif 1005 } 1006 1007 /* 1008 * Handle statuses that may invalidate our cached 1009 * copy of INTSTAT separately. 1010 */ 1011 if (intstat == 0xFF && (ahd->features & AHD_REMOVABLE) != 0) { 1012 /* Hot eject. Do nothing */ 1013 } else if (intstat & HWERRINT) { 1014 ahd_handle_hwerrint(ahd); 1015 } else if ((intstat & (PCIINT|SPLTINT)) != 0) { 1016 ahd->bus_intr(ahd); 1017 } else { 1018 1019 if ((intstat & SEQINT) != 0) 1020 ahd_handle_seqint(ahd, intstat); 1021 1022 if ((intstat & SCSIINT) != 0) 1023 ahd_handle_scsiint(ahd, intstat); 1024 } 1025 return (1); 1026 } 1027 1028 /******************************** Private Inlines *****************************/ 1029 static inline void 1030 ahd_assert_atn(struct ahd_softc *ahd) 1031 { 1032 ahd_outb(ahd, SCSISIGO, ATNO); 1033 } 1034 1035 /* 1036 * Determine if the current connection has a packetized 1037 * agreement. This does not necessarily mean that we 1038 * are currently in a packetized transfer. We could 1039 * just as easily be sending or receiving a message. 1040 */ 1041 static int 1042 ahd_currently_packetized(struct ahd_softc *ahd) 1043 { 1044 ahd_mode_state saved_modes; 1045 int packetized; 1046 1047 saved_modes = ahd_save_modes(ahd); 1048 if ((ahd->bugs & AHD_PKTIZED_STATUS_BUG) != 0) { 1049 /* 1050 * The packetized bit refers to the last 1051 * connection, not the current one. Check 1052 * for non-zero LQISTATE instead. 1053 */ 1054 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 1055 packetized = ahd_inb(ahd, LQISTATE) != 0; 1056 } else { 1057 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1058 packetized = ahd_inb(ahd, LQISTAT2) & PACKETIZED; 1059 } 1060 ahd_restore_modes(ahd, saved_modes); 1061 return (packetized); 1062 } 1063 1064 static inline int 1065 ahd_set_active_fifo(struct ahd_softc *ahd) 1066 { 1067 u_int active_fifo; 1068 1069 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 1070 active_fifo = ahd_inb(ahd, DFFSTAT) & CURRFIFO; 1071 switch (active_fifo) { 1072 case 0: 1073 case 1: 1074 ahd_set_modes(ahd, active_fifo, active_fifo); 1075 return (1); 1076 default: 1077 return (0); 1078 } 1079 } 1080 1081 static inline void 1082 ahd_unbusy_tcl(struct ahd_softc *ahd, u_int tcl) 1083 { 1084 ahd_busy_tcl(ahd, tcl, SCB_LIST_NULL); 1085 } 1086 1087 /* 1088 * Determine whether the sequencer reported a residual 1089 * for this SCB/transaction. 1090 */ 1091 static inline void 1092 ahd_update_residual(struct ahd_softc *ahd, struct scb *scb) 1093 { 1094 uint32_t sgptr; 1095 1096 sgptr = ahd_le32toh(scb->hscb->sgptr); 1097 if ((sgptr & SG_STATUS_VALID) != 0) 1098 ahd_calc_residual(ahd, scb); 1099 } 1100 1101 static inline void 1102 ahd_complete_scb(struct ahd_softc *ahd, struct scb *scb) 1103 { 1104 uint32_t sgptr; 1105 1106 sgptr = ahd_le32toh(scb->hscb->sgptr); 1107 if ((sgptr & SG_STATUS_VALID) != 0) 1108 ahd_handle_scb_status(ahd, scb); 1109 else 1110 ahd_done(ahd, scb); 1111 } 1112 1113 1114 /************************* Sequencer Execution Control ************************/ 1115 /* 1116 * Restart the sequencer program from address zero 1117 */ 1118 static void 1119 ahd_restart(struct ahd_softc *ahd) 1120 { 1121 1122 ahd_pause(ahd); 1123 1124 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1125 1126 /* No more pending messages */ 1127 ahd_clear_msg_state(ahd); 1128 ahd_outb(ahd, SCSISIGO, 0); /* De-assert BSY */ 1129 ahd_outb(ahd, MSG_OUT, MSG_NOOP); /* No message to send */ 1130 ahd_outb(ahd, SXFRCTL1, ahd_inb(ahd, SXFRCTL1) & ~BITBUCKET); 1131 ahd_outb(ahd, SEQINTCTL, 0); 1132 ahd_outb(ahd, LASTPHASE, P_BUSFREE); 1133 ahd_outb(ahd, SEQ_FLAGS, 0); 1134 ahd_outb(ahd, SAVED_SCSIID, 0xFF); 1135 ahd_outb(ahd, SAVED_LUN, 0xFF); 1136 1137 /* 1138 * Ensure that the sequencer's idea of TQINPOS 1139 * matches our own. The sequencer increments TQINPOS 1140 * only after it sees a DMA complete and a reset could 1141 * occur before the increment leaving the kernel to believe 1142 * the command arrived but the sequencer to not. 1143 */ 1144 ahd_outb(ahd, TQINPOS, ahd->tqinfifonext); 1145 1146 /* Always allow reselection */ 1147 ahd_outb(ahd, SCSISEQ1, 1148 ahd_inb(ahd, SCSISEQ_TEMPLATE) & (ENSELI|ENRSELI|ENAUTOATNP)); 1149 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 1150 1151 /* 1152 * Clear any pending sequencer interrupt. It is no 1153 * longer relevant since we're resetting the Program 1154 * Counter. 1155 */ 1156 ahd_outb(ahd, CLRINT, CLRSEQINT); 1157 1158 ahd_outb(ahd, SEQCTL0, FASTMODE|SEQRESET); 1159 ahd_unpause(ahd); 1160 } 1161 1162 static void 1163 ahd_clear_fifo(struct ahd_softc *ahd, u_int fifo) 1164 { 1165 ahd_mode_state saved_modes; 1166 1167 #ifdef AHD_DEBUG 1168 if ((ahd_debug & AHD_SHOW_FIFOS) != 0) 1169 printk("%s: Clearing FIFO %d\n", ahd_name(ahd), fifo); 1170 #endif 1171 saved_modes = ahd_save_modes(ahd); 1172 ahd_set_modes(ahd, fifo, fifo); 1173 ahd_outb(ahd, DFFSXFRCTL, RSTCHN|CLRSHCNT); 1174 if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0) 1175 ahd_outb(ahd, CCSGCTL, CCSGRESET); 1176 ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR); 1177 ahd_outb(ahd, SG_STATE, 0); 1178 ahd_restore_modes(ahd, saved_modes); 1179 } 1180 1181 /************************* Input/Output Queues ********************************/ 1182 /* 1183 * Flush and completed commands that are sitting in the command 1184 * complete queues down on the chip but have yet to be dma'ed back up. 1185 */ 1186 static void 1187 ahd_flush_qoutfifo(struct ahd_softc *ahd) 1188 { 1189 struct scb *scb; 1190 ahd_mode_state saved_modes; 1191 u_int saved_scbptr; 1192 u_int ccscbctl; 1193 u_int scbid; 1194 u_int next_scbid; 1195 1196 saved_modes = ahd_save_modes(ahd); 1197 1198 /* 1199 * Flush the good status FIFO for completed packetized commands. 1200 */ 1201 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1202 saved_scbptr = ahd_get_scbptr(ahd); 1203 while ((ahd_inb(ahd, LQISTAT2) & LQIGSAVAIL) != 0) { 1204 u_int fifo_mode; 1205 u_int i; 1206 1207 scbid = ahd_inw(ahd, GSFIFO); 1208 scb = ahd_lookup_scb(ahd, scbid); 1209 if (scb == NULL) { 1210 printk("%s: Warning - GSFIFO SCB %d invalid\n", 1211 ahd_name(ahd), scbid); 1212 continue; 1213 } 1214 /* 1215 * Determine if this transaction is still active in 1216 * any FIFO. If it is, we must flush that FIFO to 1217 * the host before completing the command. 1218 */ 1219 fifo_mode = 0; 1220 rescan_fifos: 1221 for (i = 0; i < 2; i++) { 1222 /* Toggle to the other mode. */ 1223 fifo_mode ^= 1; 1224 ahd_set_modes(ahd, fifo_mode, fifo_mode); 1225 1226 if (ahd_scb_active_in_fifo(ahd, scb) == 0) 1227 continue; 1228 1229 ahd_run_data_fifo(ahd, scb); 1230 1231 /* 1232 * Running this FIFO may cause a CFG4DATA for 1233 * this same transaction to assert in the other 1234 * FIFO or a new snapshot SAVEPTRS interrupt 1235 * in this FIFO. Even running a FIFO may not 1236 * clear the transaction if we are still waiting 1237 * for data to drain to the host. We must loop 1238 * until the transaction is not active in either 1239 * FIFO just to be sure. Reset our loop counter 1240 * so we will visit both FIFOs again before 1241 * declaring this transaction finished. We 1242 * also delay a bit so that status has a chance 1243 * to change before we look at this FIFO again. 1244 */ 1245 ahd_delay(200); 1246 goto rescan_fifos; 1247 } 1248 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1249 ahd_set_scbptr(ahd, scbid); 1250 if ((ahd_inb_scbram(ahd, SCB_SGPTR) & SG_LIST_NULL) == 0 1251 && ((ahd_inb_scbram(ahd, SCB_SGPTR) & SG_FULL_RESID) != 0 1252 || (ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR) 1253 & SG_LIST_NULL) != 0)) { 1254 u_int comp_head; 1255 1256 /* 1257 * The transfer completed with a residual. 1258 * Place this SCB on the complete DMA list 1259 * so that we update our in-core copy of the 1260 * SCB before completing the command. 1261 */ 1262 ahd_outb(ahd, SCB_SCSI_STATUS, 0); 1263 ahd_outb(ahd, SCB_SGPTR, 1264 ahd_inb_scbram(ahd, SCB_SGPTR) 1265 | SG_STATUS_VALID); 1266 ahd_outw(ahd, SCB_TAG, scbid); 1267 ahd_outw(ahd, SCB_NEXT_COMPLETE, SCB_LIST_NULL); 1268 comp_head = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD); 1269 if (SCBID_IS_NULL(comp_head)) { 1270 ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, scbid); 1271 ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, scbid); 1272 } else { 1273 u_int tail; 1274 1275 tail = ahd_inw(ahd, COMPLETE_DMA_SCB_TAIL); 1276 ahd_set_scbptr(ahd, tail); 1277 ahd_outw(ahd, SCB_NEXT_COMPLETE, scbid); 1278 ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, scbid); 1279 ahd_set_scbptr(ahd, scbid); 1280 } 1281 } else 1282 ahd_complete_scb(ahd, scb); 1283 } 1284 ahd_set_scbptr(ahd, saved_scbptr); 1285 1286 /* 1287 * Setup for command channel portion of flush. 1288 */ 1289 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 1290 1291 /* 1292 * Wait for any inprogress DMA to complete and clear DMA state 1293 * if this is for an SCB in the qinfifo. 1294 */ 1295 while (((ccscbctl = ahd_inb(ahd, CCSCBCTL)) & (CCARREN|CCSCBEN)) != 0) { 1296 1297 if ((ccscbctl & (CCSCBDIR|CCARREN)) == (CCSCBDIR|CCARREN)) { 1298 if ((ccscbctl & ARRDONE) != 0) 1299 break; 1300 } else if ((ccscbctl & CCSCBDONE) != 0) 1301 break; 1302 ahd_delay(200); 1303 } 1304 /* 1305 * We leave the sequencer to cleanup in the case of DMA's to 1306 * update the qoutfifo. In all other cases (DMA's to the 1307 * chip or a push of an SCB from the COMPLETE_DMA_SCB list), 1308 * we disable the DMA engine so that the sequencer will not 1309 * attempt to handle the DMA completion. 1310 */ 1311 if ((ccscbctl & CCSCBDIR) != 0 || (ccscbctl & ARRDONE) != 0) 1312 ahd_outb(ahd, CCSCBCTL, ccscbctl & ~(CCARREN|CCSCBEN)); 1313 1314 /* 1315 * Complete any SCBs that just finished 1316 * being DMA'ed into the qoutfifo. 1317 */ 1318 ahd_run_qoutfifo(ahd); 1319 1320 saved_scbptr = ahd_get_scbptr(ahd); 1321 /* 1322 * Manually update/complete any completed SCBs that are waiting to be 1323 * DMA'ed back up to the host. 1324 */ 1325 scbid = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD); 1326 while (!SCBID_IS_NULL(scbid)) { 1327 uint8_t *hscb_ptr; 1328 u_int i; 1329 1330 ahd_set_scbptr(ahd, scbid); 1331 next_scbid = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 1332 scb = ahd_lookup_scb(ahd, scbid); 1333 if (scb == NULL) { 1334 printk("%s: Warning - DMA-up and complete " 1335 "SCB %d invalid\n", ahd_name(ahd), scbid); 1336 continue; 1337 } 1338 hscb_ptr = (uint8_t *)scb->hscb; 1339 for (i = 0; i < sizeof(struct hardware_scb); i++) 1340 *hscb_ptr++ = ahd_inb_scbram(ahd, SCB_BASE + i); 1341 1342 ahd_complete_scb(ahd, scb); 1343 scbid = next_scbid; 1344 } 1345 ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, SCB_LIST_NULL); 1346 ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, SCB_LIST_NULL); 1347 1348 scbid = ahd_inw(ahd, COMPLETE_ON_QFREEZE_HEAD); 1349 while (!SCBID_IS_NULL(scbid)) { 1350 1351 ahd_set_scbptr(ahd, scbid); 1352 next_scbid = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 1353 scb = ahd_lookup_scb(ahd, scbid); 1354 if (scb == NULL) { 1355 printk("%s: Warning - Complete Qfrz SCB %d invalid\n", 1356 ahd_name(ahd), scbid); 1357 continue; 1358 } 1359 1360 ahd_complete_scb(ahd, scb); 1361 scbid = next_scbid; 1362 } 1363 ahd_outw(ahd, COMPLETE_ON_QFREEZE_HEAD, SCB_LIST_NULL); 1364 1365 scbid = ahd_inw(ahd, COMPLETE_SCB_HEAD); 1366 while (!SCBID_IS_NULL(scbid)) { 1367 1368 ahd_set_scbptr(ahd, scbid); 1369 next_scbid = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 1370 scb = ahd_lookup_scb(ahd, scbid); 1371 if (scb == NULL) { 1372 printk("%s: Warning - Complete SCB %d invalid\n", 1373 ahd_name(ahd), scbid); 1374 continue; 1375 } 1376 1377 ahd_complete_scb(ahd, scb); 1378 scbid = next_scbid; 1379 } 1380 ahd_outw(ahd, COMPLETE_SCB_HEAD, SCB_LIST_NULL); 1381 1382 /* 1383 * Restore state. 1384 */ 1385 ahd_set_scbptr(ahd, saved_scbptr); 1386 ahd_restore_modes(ahd, saved_modes); 1387 ahd->flags |= AHD_UPDATE_PEND_CMDS; 1388 } 1389 1390 /* 1391 * Determine if an SCB for a packetized transaction 1392 * is active in a FIFO. 1393 */ 1394 static int 1395 ahd_scb_active_in_fifo(struct ahd_softc *ahd, struct scb *scb) 1396 { 1397 1398 /* 1399 * The FIFO is only active for our transaction if 1400 * the SCBPTR matches the SCB's ID and the firmware 1401 * has installed a handler for the FIFO or we have 1402 * a pending SAVEPTRS or CFG4DATA interrupt. 1403 */ 1404 if (ahd_get_scbptr(ahd) != SCB_GET_TAG(scb) 1405 || ((ahd_inb(ahd, LONGJMP_ADDR+1) & INVALID_ADDR) != 0 1406 && (ahd_inb(ahd, SEQINTSRC) & (CFG4DATA|SAVEPTRS)) == 0)) 1407 return (0); 1408 1409 return (1); 1410 } 1411 1412 /* 1413 * Run a data fifo to completion for a transaction we know 1414 * has completed across the SCSI bus (good status has been 1415 * received). We are already set to the correct FIFO mode 1416 * on entry to this routine. 1417 * 1418 * This function attempts to operate exactly as the firmware 1419 * would when running this FIFO. Care must be taken to update 1420 * this routine any time the firmware's FIFO algorithm is 1421 * changed. 1422 */ 1423 static void 1424 ahd_run_data_fifo(struct ahd_softc *ahd, struct scb *scb) 1425 { 1426 u_int seqintsrc; 1427 1428 seqintsrc = ahd_inb(ahd, SEQINTSRC); 1429 if ((seqintsrc & CFG4DATA) != 0) { 1430 uint32_t datacnt; 1431 uint32_t sgptr; 1432 1433 /* 1434 * Clear full residual flag. 1435 */ 1436 sgptr = ahd_inl_scbram(ahd, SCB_SGPTR) & ~SG_FULL_RESID; 1437 ahd_outb(ahd, SCB_SGPTR, sgptr); 1438 1439 /* 1440 * Load datacnt and address. 1441 */ 1442 datacnt = ahd_inl_scbram(ahd, SCB_DATACNT); 1443 if ((datacnt & AHD_DMA_LAST_SEG) != 0) { 1444 sgptr |= LAST_SEG; 1445 ahd_outb(ahd, SG_STATE, 0); 1446 } else 1447 ahd_outb(ahd, SG_STATE, LOADING_NEEDED); 1448 ahd_outq(ahd, HADDR, ahd_inq_scbram(ahd, SCB_DATAPTR)); 1449 ahd_outl(ahd, HCNT, datacnt & AHD_SG_LEN_MASK); 1450 ahd_outb(ahd, SG_CACHE_PRE, sgptr); 1451 ahd_outb(ahd, DFCNTRL, PRELOADEN|SCSIEN|HDMAEN); 1452 1453 /* 1454 * Initialize Residual Fields. 1455 */ 1456 ahd_outb(ahd, SCB_RESIDUAL_DATACNT+3, datacnt >> 24); 1457 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr & SG_PTR_MASK); 1458 1459 /* 1460 * Mark the SCB as having a FIFO in use. 1461 */ 1462 ahd_outb(ahd, SCB_FIFO_USE_COUNT, 1463 ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT) + 1); 1464 1465 /* 1466 * Install a "fake" handler for this FIFO. 1467 */ 1468 ahd_outw(ahd, LONGJMP_ADDR, 0); 1469 1470 /* 1471 * Notify the hardware that we have satisfied 1472 * this sequencer interrupt. 1473 */ 1474 ahd_outb(ahd, CLRSEQINTSRC, CLRCFG4DATA); 1475 } else if ((seqintsrc & SAVEPTRS) != 0) { 1476 uint32_t sgptr; 1477 uint32_t resid; 1478 1479 if ((ahd_inb(ahd, LONGJMP_ADDR+1)&INVALID_ADDR) != 0) { 1480 /* 1481 * Snapshot Save Pointers. All that 1482 * is necessary to clear the snapshot 1483 * is a CLRCHN. 1484 */ 1485 goto clrchn; 1486 } 1487 1488 /* 1489 * Disable S/G fetch so the DMA engine 1490 * is available to future users. 1491 */ 1492 if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0) 1493 ahd_outb(ahd, CCSGCTL, 0); 1494 ahd_outb(ahd, SG_STATE, 0); 1495 1496 /* 1497 * Flush the data FIFO. Strickly only 1498 * necessary for Rev A parts. 1499 */ 1500 ahd_outb(ahd, DFCNTRL, ahd_inb(ahd, DFCNTRL) | FIFOFLUSH); 1501 1502 /* 1503 * Calculate residual. 1504 */ 1505 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR); 1506 resid = ahd_inl(ahd, SHCNT); 1507 resid |= ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT+3) << 24; 1508 ahd_outl(ahd, SCB_RESIDUAL_DATACNT, resid); 1509 if ((ahd_inb(ahd, SG_CACHE_SHADOW) & LAST_SEG) == 0) { 1510 /* 1511 * Must back up to the correct S/G element. 1512 * Typically this just means resetting our 1513 * low byte to the offset in the SG_CACHE, 1514 * but if we wrapped, we have to correct 1515 * the other bytes of the sgptr too. 1516 */ 1517 if ((ahd_inb(ahd, SG_CACHE_SHADOW) & 0x80) != 0 1518 && (sgptr & 0x80) == 0) 1519 sgptr -= 0x100; 1520 sgptr &= ~0xFF; 1521 sgptr |= ahd_inb(ahd, SG_CACHE_SHADOW) 1522 & SG_ADDR_MASK; 1523 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr); 1524 ahd_outb(ahd, SCB_RESIDUAL_DATACNT + 3, 0); 1525 } else if ((resid & AHD_SG_LEN_MASK) == 0) { 1526 ahd_outb(ahd, SCB_RESIDUAL_SGPTR, 1527 sgptr | SG_LIST_NULL); 1528 } 1529 /* 1530 * Save Pointers. 1531 */ 1532 ahd_outq(ahd, SCB_DATAPTR, ahd_inq(ahd, SHADDR)); 1533 ahd_outl(ahd, SCB_DATACNT, resid); 1534 ahd_outl(ahd, SCB_SGPTR, sgptr); 1535 ahd_outb(ahd, CLRSEQINTSRC, CLRSAVEPTRS); 1536 ahd_outb(ahd, SEQIMODE, 1537 ahd_inb(ahd, SEQIMODE) | ENSAVEPTRS); 1538 /* 1539 * If the data is to the SCSI bus, we are 1540 * done, otherwise wait for FIFOEMP. 1541 */ 1542 if ((ahd_inb(ahd, DFCNTRL) & DIRECTION) != 0) 1543 goto clrchn; 1544 } else if ((ahd_inb(ahd, SG_STATE) & LOADING_NEEDED) != 0) { 1545 uint32_t sgptr; 1546 uint64_t data_addr; 1547 uint32_t data_len; 1548 u_int dfcntrl; 1549 1550 /* 1551 * Disable S/G fetch so the DMA engine 1552 * is available to future users. We won't 1553 * be using the DMA engine to load segments. 1554 */ 1555 if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0) { 1556 ahd_outb(ahd, CCSGCTL, 0); 1557 ahd_outb(ahd, SG_STATE, LOADING_NEEDED); 1558 } 1559 1560 /* 1561 * Wait for the DMA engine to notice that the 1562 * host transfer is enabled and that there is 1563 * space in the S/G FIFO for new segments before 1564 * loading more segments. 1565 */ 1566 if ((ahd_inb(ahd, DFSTATUS) & PRELOAD_AVAIL) != 0 1567 && (ahd_inb(ahd, DFCNTRL) & HDMAENACK) != 0) { 1568 1569 /* 1570 * Determine the offset of the next S/G 1571 * element to load. 1572 */ 1573 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR); 1574 sgptr &= SG_PTR_MASK; 1575 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) { 1576 struct ahd_dma64_seg *sg; 1577 1578 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 1579 data_addr = sg->addr; 1580 data_len = sg->len; 1581 sgptr += sizeof(*sg); 1582 } else { 1583 struct ahd_dma_seg *sg; 1584 1585 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 1586 data_addr = sg->len & AHD_SG_HIGH_ADDR_MASK; 1587 data_addr <<= 8; 1588 data_addr |= sg->addr; 1589 data_len = sg->len; 1590 sgptr += sizeof(*sg); 1591 } 1592 1593 /* 1594 * Update residual information. 1595 */ 1596 ahd_outb(ahd, SCB_RESIDUAL_DATACNT+3, data_len >> 24); 1597 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr); 1598 1599 /* 1600 * Load the S/G. 1601 */ 1602 if (data_len & AHD_DMA_LAST_SEG) { 1603 sgptr |= LAST_SEG; 1604 ahd_outb(ahd, SG_STATE, 0); 1605 } 1606 ahd_outq(ahd, HADDR, data_addr); 1607 ahd_outl(ahd, HCNT, data_len & AHD_SG_LEN_MASK); 1608 ahd_outb(ahd, SG_CACHE_PRE, sgptr & 0xFF); 1609 1610 /* 1611 * Advertise the segment to the hardware. 1612 */ 1613 dfcntrl = ahd_inb(ahd, DFCNTRL)|PRELOADEN|HDMAEN; 1614 if ((ahd->features & AHD_NEW_DFCNTRL_OPTS) != 0) { 1615 /* 1616 * Use SCSIENWRDIS so that SCSIEN 1617 * is never modified by this 1618 * operation. 1619 */ 1620 dfcntrl |= SCSIENWRDIS; 1621 } 1622 ahd_outb(ahd, DFCNTRL, dfcntrl); 1623 } 1624 } else if ((ahd_inb(ahd, SG_CACHE_SHADOW) & LAST_SEG_DONE) != 0) { 1625 1626 /* 1627 * Transfer completed to the end of SG list 1628 * and has flushed to the host. 1629 */ 1630 ahd_outb(ahd, SCB_SGPTR, 1631 ahd_inb_scbram(ahd, SCB_SGPTR) | SG_LIST_NULL); 1632 goto clrchn; 1633 } else if ((ahd_inb(ahd, DFSTATUS) & FIFOEMP) != 0) { 1634 clrchn: 1635 /* 1636 * Clear any handler for this FIFO, decrement 1637 * the FIFO use count for the SCB, and release 1638 * the FIFO. 1639 */ 1640 ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR); 1641 ahd_outb(ahd, SCB_FIFO_USE_COUNT, 1642 ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT) - 1); 1643 ahd_outb(ahd, DFFSXFRCTL, CLRCHN); 1644 } 1645 } 1646 1647 /* 1648 * Look for entries in the QoutFIFO that have completed. 1649 * The valid_tag completion field indicates the validity 1650 * of the entry - the valid value toggles each time through 1651 * the queue. We use the sg_status field in the completion 1652 * entry to avoid referencing the hscb if the completion 1653 * occurred with no errors and no residual. sg_status is 1654 * a copy of the first byte (little endian) of the sgptr 1655 * hscb field. 1656 */ 1657 static void 1658 ahd_run_qoutfifo(struct ahd_softc *ahd) 1659 { 1660 struct ahd_completion *completion; 1661 struct scb *scb; 1662 u_int scb_index; 1663 1664 if ((ahd->flags & AHD_RUNNING_QOUTFIFO) != 0) 1665 panic("ahd_run_qoutfifo recursion"); 1666 ahd->flags |= AHD_RUNNING_QOUTFIFO; 1667 ahd_sync_qoutfifo(ahd, BUS_DMASYNC_POSTREAD); 1668 for (;;) { 1669 completion = &ahd->qoutfifo[ahd->qoutfifonext]; 1670 1671 if (completion->valid_tag != ahd->qoutfifonext_valid_tag) 1672 break; 1673 1674 scb_index = ahd_le16toh(completion->tag); 1675 scb = ahd_lookup_scb(ahd, scb_index); 1676 if (scb == NULL) { 1677 printk("%s: WARNING no command for scb %d " 1678 "(cmdcmplt)\nQOUTPOS = %d\n", 1679 ahd_name(ahd), scb_index, 1680 ahd->qoutfifonext); 1681 ahd_dump_card_state(ahd); 1682 } else if ((completion->sg_status & SG_STATUS_VALID) != 0) { 1683 ahd_handle_scb_status(ahd, scb); 1684 } else { 1685 ahd_done(ahd, scb); 1686 } 1687 1688 ahd->qoutfifonext = (ahd->qoutfifonext+1) & (AHD_QOUT_SIZE-1); 1689 if (ahd->qoutfifonext == 0) 1690 ahd->qoutfifonext_valid_tag ^= QOUTFIFO_ENTRY_VALID; 1691 } 1692 ahd->flags &= ~AHD_RUNNING_QOUTFIFO; 1693 } 1694 1695 /************************* Interrupt Handling *********************************/ 1696 static void 1697 ahd_handle_hwerrint(struct ahd_softc *ahd) 1698 { 1699 /* 1700 * Some catastrophic hardware error has occurred. 1701 * Print it for the user and disable the controller. 1702 */ 1703 int i; 1704 int error; 1705 1706 error = ahd_inb(ahd, ERROR); 1707 for (i = 0; i < num_errors; i++) { 1708 if ((error & ahd_hard_errors[i].errno) != 0) 1709 printk("%s: hwerrint, %s\n", 1710 ahd_name(ahd), ahd_hard_errors[i].errmesg); 1711 } 1712 1713 ahd_dump_card_state(ahd); 1714 panic("BRKADRINT"); 1715 1716 /* Tell everyone that this HBA is no longer available */ 1717 ahd_abort_scbs(ahd, CAM_TARGET_WILDCARD, ALL_CHANNELS, 1718 CAM_LUN_WILDCARD, SCB_LIST_NULL, ROLE_UNKNOWN, 1719 CAM_NO_HBA); 1720 1721 /* Tell the system that this controller has gone away. */ 1722 ahd_free(ahd); 1723 } 1724 1725 #ifdef AHD_DEBUG 1726 static void 1727 ahd_dump_sglist(struct scb *scb) 1728 { 1729 int i; 1730 1731 if (scb->sg_count > 0) { 1732 if ((scb->ahd_softc->flags & AHD_64BIT_ADDRESSING) != 0) { 1733 struct ahd_dma64_seg *sg_list; 1734 1735 sg_list = (struct ahd_dma64_seg*)scb->sg_list; 1736 for (i = 0; i < scb->sg_count; i++) { 1737 uint64_t addr; 1738 1739 addr = ahd_le64toh(sg_list[i].addr); 1740 printk("sg[%d] - Addr 0x%x%x : Length %d%s\n", 1741 i, 1742 (uint32_t)((addr >> 32) & 0xFFFFFFFF), 1743 (uint32_t)(addr & 0xFFFFFFFF), 1744 sg_list[i].len & AHD_SG_LEN_MASK, 1745 (sg_list[i].len & AHD_DMA_LAST_SEG) 1746 ? " Last" : ""); 1747 } 1748 } else { 1749 struct ahd_dma_seg *sg_list; 1750 1751 sg_list = (struct ahd_dma_seg*)scb->sg_list; 1752 for (i = 0; i < scb->sg_count; i++) { 1753 uint32_t len; 1754 1755 len = ahd_le32toh(sg_list[i].len); 1756 printk("sg[%d] - Addr 0x%x%x : Length %d%s\n", 1757 i, 1758 (len & AHD_SG_HIGH_ADDR_MASK) >> 24, 1759 ahd_le32toh(sg_list[i].addr), 1760 len & AHD_SG_LEN_MASK, 1761 len & AHD_DMA_LAST_SEG ? " Last" : ""); 1762 } 1763 } 1764 } 1765 } 1766 #endif /* AHD_DEBUG */ 1767 1768 static void 1769 ahd_handle_seqint(struct ahd_softc *ahd, u_int intstat) 1770 { 1771 u_int seqintcode; 1772 1773 /* 1774 * Save the sequencer interrupt code and clear the SEQINT 1775 * bit. We will unpause the sequencer, if appropriate, 1776 * after servicing the request. 1777 */ 1778 seqintcode = ahd_inb(ahd, SEQINTCODE); 1779 ahd_outb(ahd, CLRINT, CLRSEQINT); 1780 if ((ahd->bugs & AHD_INTCOLLISION_BUG) != 0) { 1781 /* 1782 * Unpause the sequencer and let it clear 1783 * SEQINT by writing NO_SEQINT to it. This 1784 * will cause the sequencer to be paused again, 1785 * which is the expected state of this routine. 1786 */ 1787 ahd_unpause(ahd); 1788 while (!ahd_is_paused(ahd)) 1789 ; 1790 ahd_outb(ahd, CLRINT, CLRSEQINT); 1791 } 1792 ahd_update_modes(ahd); 1793 #ifdef AHD_DEBUG 1794 if ((ahd_debug & AHD_SHOW_MISC) != 0) 1795 printk("%s: Handle Seqint Called for code %d\n", 1796 ahd_name(ahd), seqintcode); 1797 #endif 1798 switch (seqintcode) { 1799 case ENTERING_NONPACK: 1800 { 1801 struct scb *scb; 1802 u_int scbid; 1803 1804 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK), 1805 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK)); 1806 scbid = ahd_get_scbptr(ahd); 1807 scb = ahd_lookup_scb(ahd, scbid); 1808 if (scb == NULL) { 1809 /* 1810 * Somehow need to know if this 1811 * is from a selection or reselection. 1812 * From that, we can determine target 1813 * ID so we at least have an I_T nexus. 1814 */ 1815 } else { 1816 ahd_outb(ahd, SAVED_SCSIID, scb->hscb->scsiid); 1817 ahd_outb(ahd, SAVED_LUN, scb->hscb->lun); 1818 ahd_outb(ahd, SEQ_FLAGS, 0x0); 1819 } 1820 if ((ahd_inb(ahd, LQISTAT2) & LQIPHASE_OUTPKT) != 0 1821 && (ahd_inb(ahd, SCSISIGO) & ATNO) != 0) { 1822 /* 1823 * Phase change after read stream with 1824 * CRC error with P0 asserted on last 1825 * packet. 1826 */ 1827 #ifdef AHD_DEBUG 1828 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) 1829 printk("%s: Assuming LQIPHASE_NLQ with " 1830 "P0 assertion\n", ahd_name(ahd)); 1831 #endif 1832 } 1833 #ifdef AHD_DEBUG 1834 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) 1835 printk("%s: Entering NONPACK\n", ahd_name(ahd)); 1836 #endif 1837 break; 1838 } 1839 case INVALID_SEQINT: 1840 printk("%s: Invalid Sequencer interrupt occurred, " 1841 "resetting channel.\n", 1842 ahd_name(ahd)); 1843 #ifdef AHD_DEBUG 1844 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) 1845 ahd_dump_card_state(ahd); 1846 #endif 1847 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1848 break; 1849 case STATUS_OVERRUN: 1850 { 1851 struct scb *scb; 1852 u_int scbid; 1853 1854 scbid = ahd_get_scbptr(ahd); 1855 scb = ahd_lookup_scb(ahd, scbid); 1856 if (scb != NULL) 1857 ahd_print_path(ahd, scb); 1858 else 1859 printk("%s: ", ahd_name(ahd)); 1860 printk("SCB %d Packetized Status Overrun", scbid); 1861 ahd_dump_card_state(ahd); 1862 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1863 break; 1864 } 1865 case CFG4ISTAT_INTR: 1866 { 1867 struct scb *scb; 1868 u_int scbid; 1869 1870 scbid = ahd_get_scbptr(ahd); 1871 scb = ahd_lookup_scb(ahd, scbid); 1872 if (scb == NULL) { 1873 ahd_dump_card_state(ahd); 1874 printk("CFG4ISTAT: Free SCB %d referenced", scbid); 1875 panic("For safety"); 1876 } 1877 ahd_outq(ahd, HADDR, scb->sense_busaddr); 1878 ahd_outw(ahd, HCNT, AHD_SENSE_BUFSIZE); 1879 ahd_outb(ahd, HCNT + 2, 0); 1880 ahd_outb(ahd, SG_CACHE_PRE, SG_LAST_SEG); 1881 ahd_outb(ahd, DFCNTRL, PRELOADEN|SCSIEN|HDMAEN); 1882 break; 1883 } 1884 case ILLEGAL_PHASE: 1885 { 1886 u_int bus_phase; 1887 1888 bus_phase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK; 1889 printk("%s: ILLEGAL_PHASE 0x%x\n", 1890 ahd_name(ahd), bus_phase); 1891 1892 switch (bus_phase) { 1893 case P_DATAOUT: 1894 case P_DATAIN: 1895 case P_DATAOUT_DT: 1896 case P_DATAIN_DT: 1897 case P_MESGOUT: 1898 case P_STATUS: 1899 case P_MESGIN: 1900 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1901 printk("%s: Issued Bus Reset.\n", ahd_name(ahd)); 1902 break; 1903 case P_COMMAND: 1904 { 1905 struct ahd_devinfo devinfo; 1906 struct scb *scb; 1907 u_int scbid; 1908 1909 /* 1910 * If a target takes us into the command phase 1911 * assume that it has been externally reset and 1912 * has thus lost our previous packetized negotiation 1913 * agreement. Since we have not sent an identify 1914 * message and may not have fully qualified the 1915 * connection, we change our command to TUR, assert 1916 * ATN and ABORT the task when we go to message in 1917 * phase. The OSM will see the REQUEUE_REQUEST 1918 * status and retry the command. 1919 */ 1920 scbid = ahd_get_scbptr(ahd); 1921 scb = ahd_lookup_scb(ahd, scbid); 1922 if (scb == NULL) { 1923 printk("Invalid phase with no valid SCB. " 1924 "Resetting bus.\n"); 1925 ahd_reset_channel(ahd, 'A', 1926 /*Initiate Reset*/TRUE); 1927 break; 1928 } 1929 ahd_compile_devinfo(&devinfo, SCB_GET_OUR_ID(scb), 1930 SCB_GET_TARGET(ahd, scb), 1931 SCB_GET_LUN(scb), 1932 SCB_GET_CHANNEL(ahd, scb), 1933 ROLE_INITIATOR); 1934 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT, 1935 AHD_TRANS_ACTIVE, /*paused*/TRUE); 1936 ahd_set_syncrate(ahd, &devinfo, /*period*/0, 1937 /*offset*/0, /*ppr_options*/0, 1938 AHD_TRANS_ACTIVE, /*paused*/TRUE); 1939 /* Hand-craft TUR command */ 1940 ahd_outb(ahd, SCB_CDB_STORE, 0); 1941 ahd_outb(ahd, SCB_CDB_STORE+1, 0); 1942 ahd_outb(ahd, SCB_CDB_STORE+2, 0); 1943 ahd_outb(ahd, SCB_CDB_STORE+3, 0); 1944 ahd_outb(ahd, SCB_CDB_STORE+4, 0); 1945 ahd_outb(ahd, SCB_CDB_STORE+5, 0); 1946 ahd_outb(ahd, SCB_CDB_LEN, 6); 1947 scb->hscb->control &= ~(TAG_ENB|SCB_TAG_TYPE); 1948 scb->hscb->control |= MK_MESSAGE; 1949 ahd_outb(ahd, SCB_CONTROL, scb->hscb->control); 1950 ahd_outb(ahd, MSG_OUT, HOST_MSG); 1951 ahd_outb(ahd, SAVED_SCSIID, scb->hscb->scsiid); 1952 /* 1953 * The lun is 0, regardless of the SCB's lun 1954 * as we have not sent an identify message. 1955 */ 1956 ahd_outb(ahd, SAVED_LUN, 0); 1957 ahd_outb(ahd, SEQ_FLAGS, 0); 1958 ahd_assert_atn(ahd); 1959 scb->flags &= ~SCB_PACKETIZED; 1960 scb->flags |= SCB_ABORT|SCB_EXTERNAL_RESET; 1961 ahd_freeze_devq(ahd, scb); 1962 ahd_set_transaction_status(scb, CAM_REQUEUE_REQ); 1963 ahd_freeze_scb(scb); 1964 1965 /* Notify XPT */ 1966 ahd_send_async(ahd, devinfo.channel, devinfo.target, 1967 CAM_LUN_WILDCARD, AC_SENT_BDR); 1968 1969 /* 1970 * Allow the sequencer to continue with 1971 * non-pack processing. 1972 */ 1973 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1974 ahd_outb(ahd, CLRLQOINT1, CLRLQOPHACHGINPKT); 1975 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) { 1976 ahd_outb(ahd, CLRLQOINT1, 0); 1977 } 1978 #ifdef AHD_DEBUG 1979 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 1980 ahd_print_path(ahd, scb); 1981 printk("Unexpected command phase from " 1982 "packetized target\n"); 1983 } 1984 #endif 1985 break; 1986 } 1987 } 1988 break; 1989 } 1990 case CFG4OVERRUN: 1991 { 1992 struct scb *scb; 1993 u_int scb_index; 1994 1995 #ifdef AHD_DEBUG 1996 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 1997 printk("%s: CFG4OVERRUN mode = %x\n", ahd_name(ahd), 1998 ahd_inb(ahd, MODE_PTR)); 1999 } 2000 #endif 2001 scb_index = ahd_get_scbptr(ahd); 2002 scb = ahd_lookup_scb(ahd, scb_index); 2003 if (scb == NULL) { 2004 /* 2005 * Attempt to transfer to an SCB that is 2006 * not outstanding. 2007 */ 2008 ahd_assert_atn(ahd); 2009 ahd_outb(ahd, MSG_OUT, HOST_MSG); 2010 ahd->msgout_buf[0] = MSG_ABORT_TASK; 2011 ahd->msgout_len = 1; 2012 ahd->msgout_index = 0; 2013 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 2014 /* 2015 * Clear status received flag to prevent any 2016 * attempt to complete this bogus SCB. 2017 */ 2018 ahd_outb(ahd, SCB_CONTROL, 2019 ahd_inb_scbram(ahd, SCB_CONTROL) 2020 & ~STATUS_RCVD); 2021 } 2022 break; 2023 } 2024 case DUMP_CARD_STATE: 2025 { 2026 ahd_dump_card_state(ahd); 2027 break; 2028 } 2029 case PDATA_REINIT: 2030 { 2031 #ifdef AHD_DEBUG 2032 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 2033 printk("%s: PDATA_REINIT - DFCNTRL = 0x%x " 2034 "SG_CACHE_SHADOW = 0x%x\n", 2035 ahd_name(ahd), ahd_inb(ahd, DFCNTRL), 2036 ahd_inb(ahd, SG_CACHE_SHADOW)); 2037 } 2038 #endif 2039 ahd_reinitialize_dataptrs(ahd); 2040 break; 2041 } 2042 case HOST_MSG_LOOP: 2043 { 2044 struct ahd_devinfo devinfo; 2045 2046 /* 2047 * The sequencer has encountered a message phase 2048 * that requires host assistance for completion. 2049 * While handling the message phase(s), we will be 2050 * notified by the sequencer after each byte is 2051 * transferred so we can track bus phase changes. 2052 * 2053 * If this is the first time we've seen a HOST_MSG_LOOP 2054 * interrupt, initialize the state of the host message 2055 * loop. 2056 */ 2057 ahd_fetch_devinfo(ahd, &devinfo); 2058 if (ahd->msg_type == MSG_TYPE_NONE) { 2059 struct scb *scb; 2060 u_int scb_index; 2061 u_int bus_phase; 2062 2063 bus_phase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK; 2064 if (bus_phase != P_MESGIN 2065 && bus_phase != P_MESGOUT) { 2066 printk("ahd_intr: HOST_MSG_LOOP bad " 2067 "phase 0x%x\n", bus_phase); 2068 /* 2069 * Probably transitioned to bus free before 2070 * we got here. Just punt the message. 2071 */ 2072 ahd_dump_card_state(ahd); 2073 ahd_clear_intstat(ahd); 2074 ahd_restart(ahd); 2075 return; 2076 } 2077 2078 scb_index = ahd_get_scbptr(ahd); 2079 scb = ahd_lookup_scb(ahd, scb_index); 2080 if (devinfo.role == ROLE_INITIATOR) { 2081 if (bus_phase == P_MESGOUT) 2082 ahd_setup_initiator_msgout(ahd, 2083 &devinfo, 2084 scb); 2085 else { 2086 ahd->msg_type = 2087 MSG_TYPE_INITIATOR_MSGIN; 2088 ahd->msgin_index = 0; 2089 } 2090 } 2091 #ifdef AHD_TARGET_MODE 2092 else { 2093 if (bus_phase == P_MESGOUT) { 2094 ahd->msg_type = 2095 MSG_TYPE_TARGET_MSGOUT; 2096 ahd->msgin_index = 0; 2097 } 2098 else 2099 ahd_setup_target_msgin(ahd, 2100 &devinfo, 2101 scb); 2102 } 2103 #endif 2104 } 2105 2106 ahd_handle_message_phase(ahd); 2107 break; 2108 } 2109 case NO_MATCH: 2110 { 2111 /* Ensure we don't leave the selection hardware on */ 2112 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 2113 ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO); 2114 2115 printk("%s:%c:%d: no active SCB for reconnecting " 2116 "target - issuing BUS DEVICE RESET\n", 2117 ahd_name(ahd), 'A', ahd_inb(ahd, SELID) >> 4); 2118 printk("SAVED_SCSIID == 0x%x, SAVED_LUN == 0x%x, " 2119 "REG0 == 0x%x ACCUM = 0x%x\n", 2120 ahd_inb(ahd, SAVED_SCSIID), ahd_inb(ahd, SAVED_LUN), 2121 ahd_inw(ahd, REG0), ahd_inb(ahd, ACCUM)); 2122 printk("SEQ_FLAGS == 0x%x, SCBPTR == 0x%x, BTT == 0x%x, " 2123 "SINDEX == 0x%x\n", 2124 ahd_inb(ahd, SEQ_FLAGS), ahd_get_scbptr(ahd), 2125 ahd_find_busy_tcl(ahd, 2126 BUILD_TCL(ahd_inb(ahd, SAVED_SCSIID), 2127 ahd_inb(ahd, SAVED_LUN))), 2128 ahd_inw(ahd, SINDEX)); 2129 printk("SELID == 0x%x, SCB_SCSIID == 0x%x, SCB_LUN == 0x%x, " 2130 "SCB_CONTROL == 0x%x\n", 2131 ahd_inb(ahd, SELID), ahd_inb_scbram(ahd, SCB_SCSIID), 2132 ahd_inb_scbram(ahd, SCB_LUN), 2133 ahd_inb_scbram(ahd, SCB_CONTROL)); 2134 printk("SCSIBUS[0] == 0x%x, SCSISIGI == 0x%x\n", 2135 ahd_inb(ahd, SCSIBUS), ahd_inb(ahd, SCSISIGI)); 2136 printk("SXFRCTL0 == 0x%x\n", ahd_inb(ahd, SXFRCTL0)); 2137 printk("SEQCTL0 == 0x%x\n", ahd_inb(ahd, SEQCTL0)); 2138 ahd_dump_card_state(ahd); 2139 ahd->msgout_buf[0] = MSG_BUS_DEV_RESET; 2140 ahd->msgout_len = 1; 2141 ahd->msgout_index = 0; 2142 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 2143 ahd_outb(ahd, MSG_OUT, HOST_MSG); 2144 ahd_assert_atn(ahd); 2145 break; 2146 } 2147 case PROTO_VIOLATION: 2148 { 2149 ahd_handle_proto_violation(ahd); 2150 break; 2151 } 2152 case IGN_WIDE_RES: 2153 { 2154 struct ahd_devinfo devinfo; 2155 2156 ahd_fetch_devinfo(ahd, &devinfo); 2157 ahd_handle_ign_wide_residue(ahd, &devinfo); 2158 break; 2159 } 2160 case BAD_PHASE: 2161 { 2162 u_int lastphase; 2163 2164 lastphase = ahd_inb(ahd, LASTPHASE); 2165 printk("%s:%c:%d: unknown scsi bus phase %x, " 2166 "lastphase = 0x%x. Attempting to continue\n", 2167 ahd_name(ahd), 'A', 2168 SCSIID_TARGET(ahd, ahd_inb(ahd, SAVED_SCSIID)), 2169 lastphase, ahd_inb(ahd, SCSISIGI)); 2170 break; 2171 } 2172 case MISSED_BUSFREE: 2173 { 2174 u_int lastphase; 2175 2176 lastphase = ahd_inb(ahd, LASTPHASE); 2177 printk("%s:%c:%d: Missed busfree. " 2178 "Lastphase = 0x%x, Curphase = 0x%x\n", 2179 ahd_name(ahd), 'A', 2180 SCSIID_TARGET(ahd, ahd_inb(ahd, SAVED_SCSIID)), 2181 lastphase, ahd_inb(ahd, SCSISIGI)); 2182 ahd_restart(ahd); 2183 return; 2184 } 2185 case DATA_OVERRUN: 2186 { 2187 /* 2188 * When the sequencer detects an overrun, it 2189 * places the controller in "BITBUCKET" mode 2190 * and allows the target to complete its transfer. 2191 * Unfortunately, none of the counters get updated 2192 * when the controller is in this mode, so we have 2193 * no way of knowing how large the overrun was. 2194 */ 2195 struct scb *scb; 2196 u_int scbindex; 2197 #ifdef AHD_DEBUG 2198 u_int lastphase; 2199 #endif 2200 2201 scbindex = ahd_get_scbptr(ahd); 2202 scb = ahd_lookup_scb(ahd, scbindex); 2203 #ifdef AHD_DEBUG 2204 lastphase = ahd_inb(ahd, LASTPHASE); 2205 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 2206 ahd_print_path(ahd, scb); 2207 printk("data overrun detected %s. Tag == 0x%x.\n", 2208 ahd_lookup_phase_entry(lastphase)->phasemsg, 2209 SCB_GET_TAG(scb)); 2210 ahd_print_path(ahd, scb); 2211 printk("%s seen Data Phase. Length = %ld. " 2212 "NumSGs = %d.\n", 2213 ahd_inb(ahd, SEQ_FLAGS) & DPHASE 2214 ? "Have" : "Haven't", 2215 ahd_get_transfer_length(scb), scb->sg_count); 2216 ahd_dump_sglist(scb); 2217 } 2218 #endif 2219 2220 /* 2221 * Set this and it will take effect when the 2222 * target does a command complete. 2223 */ 2224 ahd_freeze_devq(ahd, scb); 2225 ahd_set_transaction_status(scb, CAM_DATA_RUN_ERR); 2226 ahd_freeze_scb(scb); 2227 break; 2228 } 2229 case MKMSG_FAILED: 2230 { 2231 struct ahd_devinfo devinfo; 2232 struct scb *scb; 2233 u_int scbid; 2234 2235 ahd_fetch_devinfo(ahd, &devinfo); 2236 printk("%s:%c:%d:%d: Attempt to issue message failed\n", 2237 ahd_name(ahd), devinfo.channel, devinfo.target, 2238 devinfo.lun); 2239 scbid = ahd_get_scbptr(ahd); 2240 scb = ahd_lookup_scb(ahd, scbid); 2241 if (scb != NULL 2242 && (scb->flags & SCB_RECOVERY_SCB) != 0) 2243 /* 2244 * Ensure that we didn't put a second instance of this 2245 * SCB into the QINFIFO. 2246 */ 2247 ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb), 2248 SCB_GET_CHANNEL(ahd, scb), 2249 SCB_GET_LUN(scb), SCB_GET_TAG(scb), 2250 ROLE_INITIATOR, /*status*/0, 2251 SEARCH_REMOVE); 2252 ahd_outb(ahd, SCB_CONTROL, 2253 ahd_inb_scbram(ahd, SCB_CONTROL) & ~MK_MESSAGE); 2254 break; 2255 } 2256 case TASKMGMT_FUNC_COMPLETE: 2257 { 2258 u_int scbid; 2259 struct scb *scb; 2260 2261 scbid = ahd_get_scbptr(ahd); 2262 scb = ahd_lookup_scb(ahd, scbid); 2263 if (scb != NULL) { 2264 u_int lun; 2265 u_int tag; 2266 cam_status error; 2267 2268 ahd_print_path(ahd, scb); 2269 printk("Task Management Func 0x%x Complete\n", 2270 scb->hscb->task_management); 2271 lun = CAM_LUN_WILDCARD; 2272 tag = SCB_LIST_NULL; 2273 2274 switch (scb->hscb->task_management) { 2275 case SIU_TASKMGMT_ABORT_TASK: 2276 tag = SCB_GET_TAG(scb); 2277 fallthrough; 2278 case SIU_TASKMGMT_ABORT_TASK_SET: 2279 case SIU_TASKMGMT_CLEAR_TASK_SET: 2280 lun = scb->hscb->lun; 2281 error = CAM_REQ_ABORTED; 2282 ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb), 2283 'A', lun, tag, ROLE_INITIATOR, 2284 error); 2285 break; 2286 case SIU_TASKMGMT_LUN_RESET: 2287 lun = scb->hscb->lun; 2288 fallthrough; 2289 case SIU_TASKMGMT_TARGET_RESET: 2290 { 2291 struct ahd_devinfo devinfo; 2292 2293 ahd_scb_devinfo(ahd, &devinfo, scb); 2294 error = CAM_BDR_SENT; 2295 ahd_handle_devreset(ahd, &devinfo, lun, 2296 CAM_BDR_SENT, 2297 lun != CAM_LUN_WILDCARD 2298 ? "Lun Reset" 2299 : "Target Reset", 2300 /*verbose_level*/0); 2301 break; 2302 } 2303 default: 2304 panic("Unexpected TaskMgmt Func\n"); 2305 break; 2306 } 2307 } 2308 break; 2309 } 2310 case TASKMGMT_CMD_CMPLT_OKAY: 2311 { 2312 u_int scbid; 2313 struct scb *scb; 2314 2315 /* 2316 * An ABORT TASK TMF failed to be delivered before 2317 * the targeted command completed normally. 2318 */ 2319 scbid = ahd_get_scbptr(ahd); 2320 scb = ahd_lookup_scb(ahd, scbid); 2321 if (scb != NULL) { 2322 /* 2323 * Remove the second instance of this SCB from 2324 * the QINFIFO if it is still there. 2325 */ 2326 ahd_print_path(ahd, scb); 2327 printk("SCB completes before TMF\n"); 2328 /* 2329 * Handle losing the race. Wait until any 2330 * current selection completes. We will then 2331 * set the TMF back to zero in this SCB so that 2332 * the sequencer doesn't bother to issue another 2333 * sequencer interrupt for its completion. 2334 */ 2335 while ((ahd_inb(ahd, SCSISEQ0) & ENSELO) != 0 2336 && (ahd_inb(ahd, SSTAT0) & SELDO) == 0 2337 && (ahd_inb(ahd, SSTAT1) & SELTO) == 0) 2338 ; 2339 ahd_outb(ahd, SCB_TASK_MANAGEMENT, 0); 2340 ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb), 2341 SCB_GET_CHANNEL(ahd, scb), 2342 SCB_GET_LUN(scb), SCB_GET_TAG(scb), 2343 ROLE_INITIATOR, /*status*/0, 2344 SEARCH_REMOVE); 2345 } 2346 break; 2347 } 2348 case TRACEPOINT0: 2349 case TRACEPOINT1: 2350 case TRACEPOINT2: 2351 case TRACEPOINT3: 2352 printk("%s: Tracepoint %d\n", ahd_name(ahd), 2353 seqintcode - TRACEPOINT0); 2354 break; 2355 case NO_SEQINT: 2356 break; 2357 case SAW_HWERR: 2358 ahd_handle_hwerrint(ahd); 2359 break; 2360 default: 2361 printk("%s: Unexpected SEQINTCODE %d\n", ahd_name(ahd), 2362 seqintcode); 2363 break; 2364 } 2365 /* 2366 * The sequencer is paused immediately on 2367 * a SEQINT, so we should restart it when 2368 * we're done. 2369 */ 2370 ahd_unpause(ahd); 2371 } 2372 2373 static void 2374 ahd_handle_scsiint(struct ahd_softc *ahd, u_int intstat) 2375 { 2376 struct scb *scb; 2377 u_int status0; 2378 u_int status3; 2379 u_int status; 2380 u_int lqistat1; 2381 u_int lqostat0; 2382 u_int scbid; 2383 u_int busfreetime; 2384 2385 ahd_update_modes(ahd); 2386 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 2387 2388 status3 = ahd_inb(ahd, SSTAT3) & (NTRAMPERR|OSRAMPERR); 2389 status0 = ahd_inb(ahd, SSTAT0) & (IOERR|OVERRUN|SELDI|SELDO); 2390 status = ahd_inb(ahd, SSTAT1) & (SELTO|SCSIRSTI|BUSFREE|SCSIPERR); 2391 lqistat1 = ahd_inb(ahd, LQISTAT1); 2392 lqostat0 = ahd_inb(ahd, LQOSTAT0); 2393 busfreetime = ahd_inb(ahd, SSTAT2) & BUSFREETIME; 2394 2395 /* 2396 * Ignore external resets after a bus reset. 2397 */ 2398 if (((status & SCSIRSTI) != 0) && (ahd->flags & AHD_BUS_RESET_ACTIVE)) { 2399 ahd_outb(ahd, CLRSINT1, CLRSCSIRSTI); 2400 return; 2401 } 2402 2403 /* 2404 * Clear bus reset flag 2405 */ 2406 ahd->flags &= ~AHD_BUS_RESET_ACTIVE; 2407 2408 if ((status0 & (SELDI|SELDO)) != 0) { 2409 u_int simode0; 2410 2411 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 2412 simode0 = ahd_inb(ahd, SIMODE0); 2413 status0 &= simode0 & (IOERR|OVERRUN|SELDI|SELDO); 2414 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 2415 } 2416 scbid = ahd_get_scbptr(ahd); 2417 scb = ahd_lookup_scb(ahd, scbid); 2418 if (scb != NULL 2419 && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) != 0) 2420 scb = NULL; 2421 2422 if ((status0 & IOERR) != 0) { 2423 u_int now_lvd; 2424 2425 now_lvd = ahd_inb(ahd, SBLKCTL) & ENAB40; 2426 printk("%s: Transceiver State Has Changed to %s mode\n", 2427 ahd_name(ahd), now_lvd ? "LVD" : "SE"); 2428 ahd_outb(ahd, CLRSINT0, CLRIOERR); 2429 /* 2430 * A change in I/O mode is equivalent to a bus reset. 2431 */ 2432 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 2433 ahd_pause(ahd); 2434 ahd_setup_iocell_workaround(ahd); 2435 ahd_unpause(ahd); 2436 } else if ((status0 & OVERRUN) != 0) { 2437 2438 printk("%s: SCSI offset overrun detected. Resetting bus.\n", 2439 ahd_name(ahd)); 2440 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 2441 } else if ((status & SCSIRSTI) != 0) { 2442 2443 printk("%s: Someone reset channel A\n", ahd_name(ahd)); 2444 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/FALSE); 2445 } else if ((status & SCSIPERR) != 0) { 2446 2447 /* Make sure the sequencer is in a safe location. */ 2448 ahd_clear_critical_section(ahd); 2449 2450 ahd_handle_transmission_error(ahd); 2451 } else if (lqostat0 != 0) { 2452 2453 printk("%s: lqostat0 == 0x%x!\n", ahd_name(ahd), lqostat0); 2454 ahd_outb(ahd, CLRLQOINT0, lqostat0); 2455 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) 2456 ahd_outb(ahd, CLRLQOINT1, 0); 2457 } else if ((status & SELTO) != 0) { 2458 /* Stop the selection */ 2459 ahd_outb(ahd, SCSISEQ0, 0); 2460 2461 /* Make sure the sequencer is in a safe location. */ 2462 ahd_clear_critical_section(ahd); 2463 2464 /* No more pending messages */ 2465 ahd_clear_msg_state(ahd); 2466 2467 /* Clear interrupt state */ 2468 ahd_outb(ahd, CLRSINT1, CLRSELTIMEO|CLRBUSFREE|CLRSCSIPERR); 2469 2470 /* 2471 * Although the driver does not care about the 2472 * 'Selection in Progress' status bit, the busy 2473 * LED does. SELINGO is only cleared by a successful 2474 * selection, so we must manually clear it to insure 2475 * the LED turns off just incase no future successful 2476 * selections occur (e.g. no devices on the bus). 2477 */ 2478 ahd_outb(ahd, CLRSINT0, CLRSELINGO); 2479 2480 scbid = ahd_inw(ahd, WAITING_TID_HEAD); 2481 scb = ahd_lookup_scb(ahd, scbid); 2482 if (scb == NULL) { 2483 printk("%s: ahd_intr - referenced scb not " 2484 "valid during SELTO scb(0x%x)\n", 2485 ahd_name(ahd), scbid); 2486 ahd_dump_card_state(ahd); 2487 } else { 2488 struct ahd_devinfo devinfo; 2489 #ifdef AHD_DEBUG 2490 if ((ahd_debug & AHD_SHOW_SELTO) != 0) { 2491 ahd_print_path(ahd, scb); 2492 printk("Saw Selection Timeout for SCB 0x%x\n", 2493 scbid); 2494 } 2495 #endif 2496 ahd_scb_devinfo(ahd, &devinfo, scb); 2497 ahd_set_transaction_status(scb, CAM_SEL_TIMEOUT); 2498 ahd_freeze_devq(ahd, scb); 2499 2500 /* 2501 * Cancel any pending transactions on the device 2502 * now that it seems to be missing. This will 2503 * also revert us to async/narrow transfers until 2504 * we can renegotiate with the device. 2505 */ 2506 ahd_handle_devreset(ahd, &devinfo, 2507 CAM_LUN_WILDCARD, 2508 CAM_SEL_TIMEOUT, 2509 "Selection Timeout", 2510 /*verbose_level*/1); 2511 } 2512 ahd_outb(ahd, CLRINT, CLRSCSIINT); 2513 ahd_iocell_first_selection(ahd); 2514 ahd_unpause(ahd); 2515 } else if ((status0 & (SELDI|SELDO)) != 0) { 2516 2517 ahd_iocell_first_selection(ahd); 2518 ahd_unpause(ahd); 2519 } else if (status3 != 0) { 2520 printk("%s: SCSI Cell parity error SSTAT3 == 0x%x\n", 2521 ahd_name(ahd), status3); 2522 ahd_outb(ahd, CLRSINT3, status3); 2523 } else if ((lqistat1 & (LQIPHASE_LQ|LQIPHASE_NLQ)) != 0) { 2524 2525 /* Make sure the sequencer is in a safe location. */ 2526 ahd_clear_critical_section(ahd); 2527 2528 ahd_handle_lqiphase_error(ahd, lqistat1); 2529 } else if ((lqistat1 & LQICRCI_NLQ) != 0) { 2530 /* 2531 * This status can be delayed during some 2532 * streaming operations. The SCSIPHASE 2533 * handler has already dealt with this case 2534 * so just clear the error. 2535 */ 2536 ahd_outb(ahd, CLRLQIINT1, CLRLQICRCI_NLQ); 2537 } else if ((status & BUSFREE) != 0 2538 || (lqistat1 & LQOBUSFREE) != 0) { 2539 u_int lqostat1; 2540 int restart; 2541 int clear_fifo; 2542 int packetized; 2543 u_int mode; 2544 2545 /* 2546 * Clear our selection hardware as soon as possible. 2547 * We may have an entry in the waiting Q for this target, 2548 * that is affected by this busfree and we don't want to 2549 * go about selecting the target while we handle the event. 2550 */ 2551 ahd_outb(ahd, SCSISEQ0, 0); 2552 2553 /* Make sure the sequencer is in a safe location. */ 2554 ahd_clear_critical_section(ahd); 2555 2556 /* 2557 * Determine what we were up to at the time of 2558 * the busfree. 2559 */ 2560 mode = AHD_MODE_SCSI; 2561 busfreetime = ahd_inb(ahd, SSTAT2) & BUSFREETIME; 2562 lqostat1 = ahd_inb(ahd, LQOSTAT1); 2563 switch (busfreetime) { 2564 case BUSFREE_DFF0: 2565 case BUSFREE_DFF1: 2566 { 2567 mode = busfreetime == BUSFREE_DFF0 2568 ? AHD_MODE_DFF0 : AHD_MODE_DFF1; 2569 ahd_set_modes(ahd, mode, mode); 2570 scbid = ahd_get_scbptr(ahd); 2571 scb = ahd_lookup_scb(ahd, scbid); 2572 if (scb == NULL) { 2573 printk("%s: Invalid SCB %d in DFF%d " 2574 "during unexpected busfree\n", 2575 ahd_name(ahd), scbid, mode); 2576 packetized = 0; 2577 } else 2578 packetized = (scb->flags & SCB_PACKETIZED) != 0; 2579 clear_fifo = 1; 2580 break; 2581 } 2582 case BUSFREE_LQO: 2583 clear_fifo = 0; 2584 packetized = 1; 2585 break; 2586 default: 2587 clear_fifo = 0; 2588 packetized = (lqostat1 & LQOBUSFREE) != 0; 2589 if (!packetized 2590 && ahd_inb(ahd, LASTPHASE) == P_BUSFREE 2591 && (ahd_inb(ahd, SSTAT0) & SELDI) == 0 2592 && ((ahd_inb(ahd, SSTAT0) & SELDO) == 0 2593 || (ahd_inb(ahd, SCSISEQ0) & ENSELO) == 0)) 2594 /* 2595 * Assume packetized if we are not 2596 * on the bus in a non-packetized 2597 * capacity and any pending selection 2598 * was a packetized selection. 2599 */ 2600 packetized = 1; 2601 break; 2602 } 2603 2604 #ifdef AHD_DEBUG 2605 if ((ahd_debug & AHD_SHOW_MISC) != 0) 2606 printk("Saw Busfree. Busfreetime = 0x%x.\n", 2607 busfreetime); 2608 #endif 2609 /* 2610 * Busfrees that occur in non-packetized phases are 2611 * handled by the nonpkt_busfree handler. 2612 */ 2613 if (packetized && ahd_inb(ahd, LASTPHASE) == P_BUSFREE) { 2614 restart = ahd_handle_pkt_busfree(ahd, busfreetime); 2615 } else { 2616 packetized = 0; 2617 restart = ahd_handle_nonpkt_busfree(ahd); 2618 } 2619 /* 2620 * Clear the busfree interrupt status. The setting of 2621 * the interrupt is a pulse, so in a perfect world, we 2622 * would not need to muck with the ENBUSFREE logic. This 2623 * would ensure that if the bus moves on to another 2624 * connection, busfree protection is still in force. If 2625 * BUSFREEREV is broken, however, we must manually clear 2626 * the ENBUSFREE if the busfree occurred during a non-pack 2627 * connection so that we don't get false positives during 2628 * future, packetized, connections. 2629 */ 2630 ahd_outb(ahd, CLRSINT1, CLRBUSFREE); 2631 if (packetized == 0 2632 && (ahd->bugs & AHD_BUSFREEREV_BUG) != 0) 2633 ahd_outb(ahd, SIMODE1, 2634 ahd_inb(ahd, SIMODE1) & ~ENBUSFREE); 2635 2636 if (clear_fifo) 2637 ahd_clear_fifo(ahd, mode); 2638 2639 ahd_clear_msg_state(ahd); 2640 ahd_outb(ahd, CLRINT, CLRSCSIINT); 2641 if (restart) { 2642 ahd_restart(ahd); 2643 } else { 2644 ahd_unpause(ahd); 2645 } 2646 } else { 2647 printk("%s: Missing case in ahd_handle_scsiint. status = %x\n", 2648 ahd_name(ahd), status); 2649 ahd_dump_card_state(ahd); 2650 ahd_clear_intstat(ahd); 2651 ahd_unpause(ahd); 2652 } 2653 } 2654 2655 static void 2656 ahd_handle_transmission_error(struct ahd_softc *ahd) 2657 { 2658 struct scb *scb; 2659 u_int scbid; 2660 u_int lqistat1; 2661 u_int msg_out; 2662 u_int curphase; 2663 u_int lastphase; 2664 u_int perrdiag; 2665 u_int cur_col; 2666 int silent; 2667 2668 scb = NULL; 2669 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 2670 lqistat1 = ahd_inb(ahd, LQISTAT1) & ~(LQIPHASE_LQ|LQIPHASE_NLQ); 2671 ahd_inb(ahd, LQISTAT2); 2672 if ((lqistat1 & (LQICRCI_NLQ|LQICRCI_LQ)) == 0 2673 && (ahd->bugs & AHD_NLQICRC_DELAYED_BUG) != 0) { 2674 u_int lqistate; 2675 2676 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 2677 lqistate = ahd_inb(ahd, LQISTATE); 2678 if ((lqistate >= 0x1E && lqistate <= 0x24) 2679 || (lqistate == 0x29)) { 2680 #ifdef AHD_DEBUG 2681 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 2682 printk("%s: NLQCRC found via LQISTATE\n", 2683 ahd_name(ahd)); 2684 } 2685 #endif 2686 lqistat1 |= LQICRCI_NLQ; 2687 } 2688 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 2689 } 2690 2691 ahd_outb(ahd, CLRLQIINT1, lqistat1); 2692 lastphase = ahd_inb(ahd, LASTPHASE); 2693 curphase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK; 2694 perrdiag = ahd_inb(ahd, PERRDIAG); 2695 msg_out = MSG_INITIATOR_DET_ERR; 2696 ahd_outb(ahd, CLRSINT1, CLRSCSIPERR); 2697 2698 /* 2699 * Try to find the SCB associated with this error. 2700 */ 2701 silent = FALSE; 2702 if (lqistat1 == 0 2703 || (lqistat1 & LQICRCI_NLQ) != 0) { 2704 if ((lqistat1 & (LQICRCI_NLQ|LQIOVERI_NLQ)) != 0) 2705 ahd_set_active_fifo(ahd); 2706 scbid = ahd_get_scbptr(ahd); 2707 scb = ahd_lookup_scb(ahd, scbid); 2708 if (scb != NULL && SCB_IS_SILENT(scb)) 2709 silent = TRUE; 2710 } 2711 2712 cur_col = 0; 2713 if (silent == FALSE) { 2714 printk("%s: Transmission error detected\n", ahd_name(ahd)); 2715 ahd_lqistat1_print(lqistat1, &cur_col, 50); 2716 ahd_lastphase_print(lastphase, &cur_col, 50); 2717 ahd_scsisigi_print(curphase, &cur_col, 50); 2718 ahd_perrdiag_print(perrdiag, &cur_col, 50); 2719 printk("\n"); 2720 ahd_dump_card_state(ahd); 2721 } 2722 2723 if ((lqistat1 & (LQIOVERI_LQ|LQIOVERI_NLQ)) != 0) { 2724 if (silent == FALSE) { 2725 printk("%s: Gross protocol error during incoming " 2726 "packet. lqistat1 == 0x%x. Resetting bus.\n", 2727 ahd_name(ahd), lqistat1); 2728 } 2729 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 2730 return; 2731 } else if ((lqistat1 & LQICRCI_LQ) != 0) { 2732 /* 2733 * A CRC error has been detected on an incoming LQ. 2734 * The bus is currently hung on the last ACK. 2735 * Hit LQIRETRY to release the last ack, and 2736 * wait for the sequencer to determine that ATNO 2737 * is asserted while in message out to take us 2738 * to our host message loop. No NONPACKREQ or 2739 * LQIPHASE type errors will occur in this 2740 * scenario. After this first LQIRETRY, the LQI 2741 * manager will be in ISELO where it will 2742 * happily sit until another packet phase begins. 2743 * Unexpected bus free detection is enabled 2744 * through any phases that occur after we release 2745 * this last ack until the LQI manager sees a 2746 * packet phase. This implies we may have to 2747 * ignore a perfectly valid "unexected busfree" 2748 * after our "initiator detected error" message is 2749 * sent. A busfree is the expected response after 2750 * we tell the target that it's L_Q was corrupted. 2751 * (SPI4R09 10.7.3.3.3) 2752 */ 2753 ahd_outb(ahd, LQCTL2, LQIRETRY); 2754 printk("LQIRetry for LQICRCI_LQ to release ACK\n"); 2755 } else if ((lqistat1 & LQICRCI_NLQ) != 0) { 2756 /* 2757 * We detected a CRC error in a NON-LQ packet. 2758 * The hardware has varying behavior in this situation 2759 * depending on whether this packet was part of a 2760 * stream or not. 2761 * 2762 * PKT by PKT mode: 2763 * The hardware has already acked the complete packet. 2764 * If the target honors our outstanding ATN condition, 2765 * we should be (or soon will be) in MSGOUT phase. 2766 * This will trigger the LQIPHASE_LQ status bit as the 2767 * hardware was expecting another LQ. Unexpected 2768 * busfree detection is enabled. Once LQIPHASE_LQ is 2769 * true (first entry into host message loop is much 2770 * the same), we must clear LQIPHASE_LQ and hit 2771 * LQIRETRY so the hardware is ready to handle 2772 * a future LQ. NONPACKREQ will not be asserted again 2773 * once we hit LQIRETRY until another packet is 2774 * processed. The target may either go busfree 2775 * or start another packet in response to our message. 2776 * 2777 * Read Streaming P0 asserted: 2778 * If we raise ATN and the target completes the entire 2779 * stream (P0 asserted during the last packet), the 2780 * hardware will ack all data and return to the ISTART 2781 * state. When the target reponds to our ATN condition, 2782 * LQIPHASE_LQ will be asserted. We should respond to 2783 * this with an LQIRETRY to prepare for any future 2784 * packets. NONPACKREQ will not be asserted again 2785 * once we hit LQIRETRY until another packet is 2786 * processed. The target may either go busfree or 2787 * start another packet in response to our message. 2788 * Busfree detection is enabled. 2789 * 2790 * Read Streaming P0 not asserted: 2791 * If we raise ATN and the target transitions to 2792 * MSGOUT in or after a packet where P0 is not 2793 * asserted, the hardware will assert LQIPHASE_NLQ. 2794 * We should respond to the LQIPHASE_NLQ with an 2795 * LQIRETRY. Should the target stay in a non-pkt 2796 * phase after we send our message, the hardware 2797 * will assert LQIPHASE_LQ. Recovery is then just as 2798 * listed above for the read streaming with P0 asserted. 2799 * Busfree detection is enabled. 2800 */ 2801 if (silent == FALSE) 2802 printk("LQICRC_NLQ\n"); 2803 if (scb == NULL) { 2804 printk("%s: No SCB valid for LQICRC_NLQ. " 2805 "Resetting bus\n", ahd_name(ahd)); 2806 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 2807 return; 2808 } 2809 } else if ((lqistat1 & LQIBADLQI) != 0) { 2810 printk("Need to handle BADLQI!\n"); 2811 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 2812 return; 2813 } else if ((perrdiag & (PARITYERR|PREVPHASE)) == PARITYERR) { 2814 if ((curphase & ~P_DATAIN_DT) != 0) { 2815 /* Ack the byte. So we can continue. */ 2816 if (silent == FALSE) 2817 printk("Acking %s to clear perror\n", 2818 ahd_lookup_phase_entry(curphase)->phasemsg); 2819 ahd_inb(ahd, SCSIDAT); 2820 } 2821 2822 if (curphase == P_MESGIN) 2823 msg_out = MSG_PARITY_ERROR; 2824 } 2825 2826 /* 2827 * We've set the hardware to assert ATN if we 2828 * get a parity error on "in" phases, so all we 2829 * need to do is stuff the message buffer with 2830 * the appropriate message. "In" phases have set 2831 * mesg_out to something other than MSG_NOP. 2832 */ 2833 ahd->send_msg_perror = msg_out; 2834 if (scb != NULL && msg_out == MSG_INITIATOR_DET_ERR) 2835 scb->flags |= SCB_TRANSMISSION_ERROR; 2836 ahd_outb(ahd, MSG_OUT, HOST_MSG); 2837 ahd_outb(ahd, CLRINT, CLRSCSIINT); 2838 ahd_unpause(ahd); 2839 } 2840 2841 static void 2842 ahd_handle_lqiphase_error(struct ahd_softc *ahd, u_int lqistat1) 2843 { 2844 /* 2845 * Clear the sources of the interrupts. 2846 */ 2847 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 2848 ahd_outb(ahd, CLRLQIINT1, lqistat1); 2849 2850 /* 2851 * If the "illegal" phase changes were in response 2852 * to our ATN to flag a CRC error, AND we ended up 2853 * on packet boundaries, clear the error, restart the 2854 * LQI manager as appropriate, and go on our merry 2855 * way toward sending the message. Otherwise, reset 2856 * the bus to clear the error. 2857 */ 2858 ahd_set_active_fifo(ahd); 2859 if ((ahd_inb(ahd, SCSISIGO) & ATNO) != 0 2860 && (ahd_inb(ahd, MDFFSTAT) & DLZERO) != 0) { 2861 if ((lqistat1 & LQIPHASE_LQ) != 0) { 2862 printk("LQIRETRY for LQIPHASE_LQ\n"); 2863 ahd_outb(ahd, LQCTL2, LQIRETRY); 2864 } else if ((lqistat1 & LQIPHASE_NLQ) != 0) { 2865 printk("LQIRETRY for LQIPHASE_NLQ\n"); 2866 ahd_outb(ahd, LQCTL2, LQIRETRY); 2867 } else 2868 panic("ahd_handle_lqiphase_error: No phase errors\n"); 2869 ahd_dump_card_state(ahd); 2870 ahd_outb(ahd, CLRINT, CLRSCSIINT); 2871 ahd_unpause(ahd); 2872 } else { 2873 printk("Resetting Channel for LQI Phase error\n"); 2874 ahd_dump_card_state(ahd); 2875 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 2876 } 2877 } 2878 2879 /* 2880 * Packetized unexpected or expected busfree. 2881 * Entered in mode based on busfreetime. 2882 */ 2883 static int 2884 ahd_handle_pkt_busfree(struct ahd_softc *ahd, u_int busfreetime) 2885 { 2886 u_int lqostat1; 2887 2888 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK), 2889 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK)); 2890 lqostat1 = ahd_inb(ahd, LQOSTAT1); 2891 if ((lqostat1 & LQOBUSFREE) != 0) { 2892 struct scb *scb; 2893 u_int scbid; 2894 u_int saved_scbptr; 2895 u_int waiting_h; 2896 u_int waiting_t; 2897 u_int next; 2898 2899 /* 2900 * The LQO manager detected an unexpected busfree 2901 * either: 2902 * 2903 * 1) During an outgoing LQ. 2904 * 2) After an outgoing LQ but before the first 2905 * REQ of the command packet. 2906 * 3) During an outgoing command packet. 2907 * 2908 * In all cases, CURRSCB is pointing to the 2909 * SCB that encountered the failure. Clean 2910 * up the queue, clear SELDO and LQOBUSFREE, 2911 * and allow the sequencer to restart the select 2912 * out at its lesure. 2913 */ 2914 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 2915 scbid = ahd_inw(ahd, CURRSCB); 2916 scb = ahd_lookup_scb(ahd, scbid); 2917 if (scb == NULL) 2918 panic("SCB not valid during LQOBUSFREE"); 2919 /* 2920 * Clear the status. 2921 */ 2922 ahd_outb(ahd, CLRLQOINT1, CLRLQOBUSFREE); 2923 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) 2924 ahd_outb(ahd, CLRLQOINT1, 0); 2925 ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO); 2926 ahd_flush_device_writes(ahd); 2927 ahd_outb(ahd, CLRSINT0, CLRSELDO); 2928 2929 /* 2930 * Return the LQO manager to its idle loop. It will 2931 * not do this automatically if the busfree occurs 2932 * after the first REQ of either the LQ or command 2933 * packet or between the LQ and command packet. 2934 */ 2935 ahd_outb(ahd, LQCTL2, ahd_inb(ahd, LQCTL2) | LQOTOIDLE); 2936 2937 /* 2938 * Update the waiting for selection queue so 2939 * we restart on the correct SCB. 2940 */ 2941 waiting_h = ahd_inw(ahd, WAITING_TID_HEAD); 2942 saved_scbptr = ahd_get_scbptr(ahd); 2943 if (waiting_h != scbid) { 2944 2945 ahd_outw(ahd, WAITING_TID_HEAD, scbid); 2946 waiting_t = ahd_inw(ahd, WAITING_TID_TAIL); 2947 if (waiting_t == waiting_h) { 2948 ahd_outw(ahd, WAITING_TID_TAIL, scbid); 2949 next = SCB_LIST_NULL; 2950 } else { 2951 ahd_set_scbptr(ahd, waiting_h); 2952 next = ahd_inw_scbram(ahd, SCB_NEXT2); 2953 } 2954 ahd_set_scbptr(ahd, scbid); 2955 ahd_outw(ahd, SCB_NEXT2, next); 2956 } 2957 ahd_set_scbptr(ahd, saved_scbptr); 2958 if (scb->crc_retry_count < AHD_MAX_LQ_CRC_ERRORS) { 2959 if (SCB_IS_SILENT(scb) == FALSE) { 2960 ahd_print_path(ahd, scb); 2961 printk("Probable outgoing LQ CRC error. " 2962 "Retrying command\n"); 2963 } 2964 scb->crc_retry_count++; 2965 } else { 2966 ahd_set_transaction_status(scb, CAM_UNCOR_PARITY); 2967 ahd_freeze_scb(scb); 2968 ahd_freeze_devq(ahd, scb); 2969 } 2970 /* Return unpausing the sequencer. */ 2971 return (0); 2972 } else if ((ahd_inb(ahd, PERRDIAG) & PARITYERR) != 0) { 2973 /* 2974 * Ignore what are really parity errors that 2975 * occur on the last REQ of a free running 2976 * clock prior to going busfree. Some drives 2977 * do not properly active negate just before 2978 * going busfree resulting in a parity glitch. 2979 */ 2980 ahd_outb(ahd, CLRSINT1, CLRSCSIPERR|CLRBUSFREE); 2981 #ifdef AHD_DEBUG 2982 if ((ahd_debug & AHD_SHOW_MASKED_ERRORS) != 0) 2983 printk("%s: Parity on last REQ detected " 2984 "during busfree phase.\n", 2985 ahd_name(ahd)); 2986 #endif 2987 /* Return unpausing the sequencer. */ 2988 return (0); 2989 } 2990 if (ahd->src_mode != AHD_MODE_SCSI) { 2991 u_int scbid; 2992 struct scb *scb; 2993 2994 scbid = ahd_get_scbptr(ahd); 2995 scb = ahd_lookup_scb(ahd, scbid); 2996 ahd_print_path(ahd, scb); 2997 printk("Unexpected PKT busfree condition\n"); 2998 ahd_dump_card_state(ahd); 2999 ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb), 'A', 3000 SCB_GET_LUN(scb), SCB_GET_TAG(scb), 3001 ROLE_INITIATOR, CAM_UNEXP_BUSFREE); 3002 3003 /* Return restarting the sequencer. */ 3004 return (1); 3005 } 3006 printk("%s: Unexpected PKT busfree condition\n", ahd_name(ahd)); 3007 ahd_dump_card_state(ahd); 3008 /* Restart the sequencer. */ 3009 return (1); 3010 } 3011 3012 /* 3013 * Non-packetized unexpected or expected busfree. 3014 */ 3015 static int 3016 ahd_handle_nonpkt_busfree(struct ahd_softc *ahd) 3017 { 3018 struct ahd_devinfo devinfo; 3019 struct scb *scb; 3020 u_int lastphase; 3021 u_int saved_scsiid; 3022 u_int saved_lun; 3023 u_int target; 3024 u_int initiator_role_id; 3025 u_int scbid; 3026 u_int ppr_busfree; 3027 int printerror; 3028 3029 /* 3030 * Look at what phase we were last in. If its message out, 3031 * chances are pretty good that the busfree was in response 3032 * to one of our abort requests. 3033 */ 3034 lastphase = ahd_inb(ahd, LASTPHASE); 3035 saved_scsiid = ahd_inb(ahd, SAVED_SCSIID); 3036 saved_lun = ahd_inb(ahd, SAVED_LUN); 3037 target = SCSIID_TARGET(ahd, saved_scsiid); 3038 initiator_role_id = SCSIID_OUR_ID(saved_scsiid); 3039 ahd_compile_devinfo(&devinfo, initiator_role_id, 3040 target, saved_lun, 'A', ROLE_INITIATOR); 3041 printerror = 1; 3042 3043 scbid = ahd_get_scbptr(ahd); 3044 scb = ahd_lookup_scb(ahd, scbid); 3045 if (scb != NULL 3046 && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) != 0) 3047 scb = NULL; 3048 3049 ppr_busfree = (ahd->msg_flags & MSG_FLAG_EXPECT_PPR_BUSFREE) != 0; 3050 if (lastphase == P_MESGOUT) { 3051 u_int tag; 3052 3053 tag = SCB_LIST_NULL; 3054 if (ahd_sent_msg(ahd, AHDMSG_1B, MSG_ABORT_TAG, TRUE) 3055 || ahd_sent_msg(ahd, AHDMSG_1B, MSG_ABORT, TRUE)) { 3056 int found; 3057 int sent_msg; 3058 3059 if (scb == NULL) { 3060 ahd_print_devinfo(ahd, &devinfo); 3061 printk("Abort for unidentified " 3062 "connection completed.\n"); 3063 /* restart the sequencer. */ 3064 return (1); 3065 } 3066 sent_msg = ahd->msgout_buf[ahd->msgout_index - 1]; 3067 ahd_print_path(ahd, scb); 3068 printk("SCB %d - Abort%s Completed.\n", 3069 SCB_GET_TAG(scb), 3070 sent_msg == MSG_ABORT_TAG ? "" : " Tag"); 3071 3072 if (sent_msg == MSG_ABORT_TAG) 3073 tag = SCB_GET_TAG(scb); 3074 3075 if ((scb->flags & SCB_EXTERNAL_RESET) != 0) { 3076 /* 3077 * This abort is in response to an 3078 * unexpected switch to command phase 3079 * for a packetized connection. Since 3080 * the identify message was never sent, 3081 * "saved lun" is 0. We really want to 3082 * abort only the SCB that encountered 3083 * this error, which could have a different 3084 * lun. The SCB will be retried so the OS 3085 * will see the UA after renegotiating to 3086 * packetized. 3087 */ 3088 tag = SCB_GET_TAG(scb); 3089 saved_lun = scb->hscb->lun; 3090 } 3091 found = ahd_abort_scbs(ahd, target, 'A', saved_lun, 3092 tag, ROLE_INITIATOR, 3093 CAM_REQ_ABORTED); 3094 printk("found == 0x%x\n", found); 3095 printerror = 0; 3096 } else if (ahd_sent_msg(ahd, AHDMSG_1B, 3097 MSG_BUS_DEV_RESET, TRUE)) { 3098 ahd_handle_devreset(ahd, &devinfo, CAM_LUN_WILDCARD, 3099 CAM_BDR_SENT, "Bus Device Reset", 3100 /*verbose_level*/0); 3101 printerror = 0; 3102 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, FALSE) 3103 && ppr_busfree == 0) { 3104 struct ahd_initiator_tinfo *tinfo; 3105 struct ahd_tmode_tstate *tstate; 3106 3107 /* 3108 * PPR Rejected. 3109 * 3110 * If the previous negotiation was packetized, 3111 * this could be because the device has been 3112 * reset without our knowledge. Force our 3113 * current negotiation to async and retry the 3114 * negotiation. Otherwise retry the command 3115 * with non-ppr negotiation. 3116 */ 3117 #ifdef AHD_DEBUG 3118 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 3119 printk("PPR negotiation rejected busfree.\n"); 3120 #endif 3121 tinfo = ahd_fetch_transinfo(ahd, devinfo.channel, 3122 devinfo.our_scsiid, 3123 devinfo.target, &tstate); 3124 if ((tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ)!=0) { 3125 ahd_set_width(ahd, &devinfo, 3126 MSG_EXT_WDTR_BUS_8_BIT, 3127 AHD_TRANS_CUR, 3128 /*paused*/TRUE); 3129 ahd_set_syncrate(ahd, &devinfo, 3130 /*period*/0, /*offset*/0, 3131 /*ppr_options*/0, 3132 AHD_TRANS_CUR, 3133 /*paused*/TRUE); 3134 /* 3135 * The expect PPR busfree handler below 3136 * will effect the retry and necessary 3137 * abort. 3138 */ 3139 } else { 3140 tinfo->curr.transport_version = 2; 3141 tinfo->goal.transport_version = 2; 3142 tinfo->goal.ppr_options = 0; 3143 if (scb != NULL) { 3144 /* 3145 * Remove any SCBs in the waiting 3146 * for selection queue that may 3147 * also be for this target so that 3148 * command ordering is preserved. 3149 */ 3150 ahd_freeze_devq(ahd, scb); 3151 ahd_qinfifo_requeue_tail(ahd, scb); 3152 } 3153 printerror = 0; 3154 } 3155 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, FALSE) 3156 && ppr_busfree == 0) { 3157 /* 3158 * Negotiation Rejected. Go-narrow and 3159 * retry command. 3160 */ 3161 #ifdef AHD_DEBUG 3162 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 3163 printk("WDTR negotiation rejected busfree.\n"); 3164 #endif 3165 ahd_set_width(ahd, &devinfo, 3166 MSG_EXT_WDTR_BUS_8_BIT, 3167 AHD_TRANS_CUR|AHD_TRANS_GOAL, 3168 /*paused*/TRUE); 3169 if (scb != NULL) { 3170 /* 3171 * Remove any SCBs in the waiting for 3172 * selection queue that may also be for 3173 * this target so that command ordering 3174 * is preserved. 3175 */ 3176 ahd_freeze_devq(ahd, scb); 3177 ahd_qinfifo_requeue_tail(ahd, scb); 3178 } 3179 printerror = 0; 3180 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, FALSE) 3181 && ppr_busfree == 0) { 3182 /* 3183 * Negotiation Rejected. Go-async and 3184 * retry command. 3185 */ 3186 #ifdef AHD_DEBUG 3187 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 3188 printk("SDTR negotiation rejected busfree.\n"); 3189 #endif 3190 ahd_set_syncrate(ahd, &devinfo, 3191 /*period*/0, /*offset*/0, 3192 /*ppr_options*/0, 3193 AHD_TRANS_CUR|AHD_TRANS_GOAL, 3194 /*paused*/TRUE); 3195 if (scb != NULL) { 3196 /* 3197 * Remove any SCBs in the waiting for 3198 * selection queue that may also be for 3199 * this target so that command ordering 3200 * is preserved. 3201 */ 3202 ahd_freeze_devq(ahd, scb); 3203 ahd_qinfifo_requeue_tail(ahd, scb); 3204 } 3205 printerror = 0; 3206 } else if ((ahd->msg_flags & MSG_FLAG_EXPECT_IDE_BUSFREE) != 0 3207 && ahd_sent_msg(ahd, AHDMSG_1B, 3208 MSG_INITIATOR_DET_ERR, TRUE)) { 3209 3210 #ifdef AHD_DEBUG 3211 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 3212 printk("Expected IDE Busfree\n"); 3213 #endif 3214 printerror = 0; 3215 } else if ((ahd->msg_flags & MSG_FLAG_EXPECT_QASREJ_BUSFREE) 3216 && ahd_sent_msg(ahd, AHDMSG_1B, 3217 MSG_MESSAGE_REJECT, TRUE)) { 3218 3219 #ifdef AHD_DEBUG 3220 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 3221 printk("Expected QAS Reject Busfree\n"); 3222 #endif 3223 printerror = 0; 3224 } 3225 } 3226 3227 /* 3228 * The busfree required flag is honored at the end of 3229 * the message phases. We check it last in case we 3230 * had to send some other message that caused a busfree. 3231 */ 3232 if (scb != NULL && printerror != 0 3233 && (lastphase == P_MESGIN || lastphase == P_MESGOUT) 3234 && ((ahd->msg_flags & MSG_FLAG_EXPECT_PPR_BUSFREE) != 0)) { 3235 3236 ahd_freeze_devq(ahd, scb); 3237 ahd_set_transaction_status(scb, CAM_REQUEUE_REQ); 3238 ahd_freeze_scb(scb); 3239 if ((ahd->msg_flags & MSG_FLAG_IU_REQ_CHANGED) != 0) { 3240 ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb), 3241 SCB_GET_CHANNEL(ahd, scb), 3242 SCB_GET_LUN(scb), SCB_LIST_NULL, 3243 ROLE_INITIATOR, CAM_REQ_ABORTED); 3244 } else { 3245 #ifdef AHD_DEBUG 3246 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 3247 printk("PPR Negotiation Busfree.\n"); 3248 #endif 3249 ahd_done(ahd, scb); 3250 } 3251 printerror = 0; 3252 } 3253 if (printerror != 0) { 3254 int aborted; 3255 3256 aborted = 0; 3257 if (scb != NULL) { 3258 u_int tag; 3259 3260 if ((scb->hscb->control & TAG_ENB) != 0) 3261 tag = SCB_GET_TAG(scb); 3262 else 3263 tag = SCB_LIST_NULL; 3264 ahd_print_path(ahd, scb); 3265 aborted = ahd_abort_scbs(ahd, target, 'A', 3266 SCB_GET_LUN(scb), tag, 3267 ROLE_INITIATOR, 3268 CAM_UNEXP_BUSFREE); 3269 } else { 3270 /* 3271 * We had not fully identified this connection, 3272 * so we cannot abort anything. 3273 */ 3274 printk("%s: ", ahd_name(ahd)); 3275 } 3276 printk("Unexpected busfree %s, %d SCBs aborted, " 3277 "PRGMCNT == 0x%x\n", 3278 ahd_lookup_phase_entry(lastphase)->phasemsg, 3279 aborted, 3280 ahd_inw(ahd, PRGMCNT)); 3281 ahd_dump_card_state(ahd); 3282 if (lastphase != P_BUSFREE) 3283 ahd_force_renegotiation(ahd, &devinfo); 3284 } 3285 /* Always restart the sequencer. */ 3286 return (1); 3287 } 3288 3289 static void 3290 ahd_handle_proto_violation(struct ahd_softc *ahd) 3291 { 3292 struct ahd_devinfo devinfo; 3293 struct scb *scb; 3294 u_int scbid; 3295 u_int seq_flags; 3296 u_int curphase; 3297 u_int lastphase; 3298 int found; 3299 3300 ahd_fetch_devinfo(ahd, &devinfo); 3301 scbid = ahd_get_scbptr(ahd); 3302 scb = ahd_lookup_scb(ahd, scbid); 3303 seq_flags = ahd_inb(ahd, SEQ_FLAGS); 3304 curphase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK; 3305 lastphase = ahd_inb(ahd, LASTPHASE); 3306 if ((seq_flags & NOT_IDENTIFIED) != 0) { 3307 3308 /* 3309 * The reconnecting target either did not send an 3310 * identify message, or did, but we didn't find an SCB 3311 * to match. 3312 */ 3313 ahd_print_devinfo(ahd, &devinfo); 3314 printk("Target did not send an IDENTIFY message. " 3315 "LASTPHASE = 0x%x.\n", lastphase); 3316 scb = NULL; 3317 } else if (scb == NULL) { 3318 /* 3319 * We don't seem to have an SCB active for this 3320 * transaction. Print an error and reset the bus. 3321 */ 3322 ahd_print_devinfo(ahd, &devinfo); 3323 printk("No SCB found during protocol violation\n"); 3324 goto proto_violation_reset; 3325 } else { 3326 ahd_set_transaction_status(scb, CAM_SEQUENCE_FAIL); 3327 if ((seq_flags & NO_CDB_SENT) != 0) { 3328 ahd_print_path(ahd, scb); 3329 printk("No or incomplete CDB sent to device.\n"); 3330 } else if ((ahd_inb_scbram(ahd, SCB_CONTROL) 3331 & STATUS_RCVD) == 0) { 3332 /* 3333 * The target never bothered to provide status to 3334 * us prior to completing the command. Since we don't 3335 * know the disposition of this command, we must attempt 3336 * to abort it. Assert ATN and prepare to send an abort 3337 * message. 3338 */ 3339 ahd_print_path(ahd, scb); 3340 printk("Completed command without status.\n"); 3341 } else { 3342 ahd_print_path(ahd, scb); 3343 printk("Unknown protocol violation.\n"); 3344 ahd_dump_card_state(ahd); 3345 } 3346 } 3347 if ((lastphase & ~P_DATAIN_DT) == 0 3348 || lastphase == P_COMMAND) { 3349 proto_violation_reset: 3350 /* 3351 * Target either went directly to data 3352 * phase or didn't respond to our ATN. 3353 * The only safe thing to do is to blow 3354 * it away with a bus reset. 3355 */ 3356 found = ahd_reset_channel(ahd, 'A', TRUE); 3357 printk("%s: Issued Channel %c Bus Reset. " 3358 "%d SCBs aborted\n", ahd_name(ahd), 'A', found); 3359 } else { 3360 /* 3361 * Leave the selection hardware off in case 3362 * this abort attempt will affect yet to 3363 * be sent commands. 3364 */ 3365 ahd_outb(ahd, SCSISEQ0, 3366 ahd_inb(ahd, SCSISEQ0) & ~ENSELO); 3367 ahd_assert_atn(ahd); 3368 ahd_outb(ahd, MSG_OUT, HOST_MSG); 3369 if (scb == NULL) { 3370 ahd_print_devinfo(ahd, &devinfo); 3371 ahd->msgout_buf[0] = MSG_ABORT_TASK; 3372 ahd->msgout_len = 1; 3373 ahd->msgout_index = 0; 3374 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 3375 } else { 3376 ahd_print_path(ahd, scb); 3377 scb->flags |= SCB_ABORT; 3378 } 3379 printk("Protocol violation %s. Attempting to abort.\n", 3380 ahd_lookup_phase_entry(curphase)->phasemsg); 3381 } 3382 } 3383 3384 /* 3385 * Force renegotiation to occur the next time we initiate 3386 * a command to the current device. 3387 */ 3388 static void 3389 ahd_force_renegotiation(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 3390 { 3391 struct ahd_initiator_tinfo *targ_info; 3392 struct ahd_tmode_tstate *tstate; 3393 3394 #ifdef AHD_DEBUG 3395 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 3396 ahd_print_devinfo(ahd, devinfo); 3397 printk("Forcing renegotiation\n"); 3398 } 3399 #endif 3400 targ_info = ahd_fetch_transinfo(ahd, 3401 devinfo->channel, 3402 devinfo->our_scsiid, 3403 devinfo->target, 3404 &tstate); 3405 ahd_update_neg_request(ahd, devinfo, tstate, 3406 targ_info, AHD_NEG_IF_NON_ASYNC); 3407 } 3408 3409 #define AHD_MAX_STEPS 2000 3410 static void 3411 ahd_clear_critical_section(struct ahd_softc *ahd) 3412 { 3413 ahd_mode_state saved_modes; 3414 int stepping; 3415 int steps; 3416 int first_instr; 3417 u_int simode0; 3418 u_int simode1; 3419 u_int simode3; 3420 u_int lqimode0; 3421 u_int lqimode1; 3422 u_int lqomode0; 3423 u_int lqomode1; 3424 3425 if (ahd->num_critical_sections == 0) 3426 return; 3427 3428 stepping = FALSE; 3429 steps = 0; 3430 first_instr = 0; 3431 simode0 = 0; 3432 simode1 = 0; 3433 simode3 = 0; 3434 lqimode0 = 0; 3435 lqimode1 = 0; 3436 lqomode0 = 0; 3437 lqomode1 = 0; 3438 saved_modes = ahd_save_modes(ahd); 3439 for (;;) { 3440 struct cs *cs; 3441 u_int seqaddr; 3442 u_int i; 3443 3444 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 3445 seqaddr = ahd_inw(ahd, CURADDR); 3446 3447 cs = ahd->critical_sections; 3448 for (i = 0; i < ahd->num_critical_sections; i++, cs++) { 3449 3450 if (cs->begin < seqaddr && cs->end >= seqaddr) 3451 break; 3452 } 3453 3454 if (i == ahd->num_critical_sections) 3455 break; 3456 3457 if (steps > AHD_MAX_STEPS) { 3458 printk("%s: Infinite loop in critical section\n" 3459 "%s: First Instruction 0x%x now 0x%x\n", 3460 ahd_name(ahd), ahd_name(ahd), first_instr, 3461 seqaddr); 3462 ahd_dump_card_state(ahd); 3463 panic("critical section loop"); 3464 } 3465 3466 steps++; 3467 #ifdef AHD_DEBUG 3468 if ((ahd_debug & AHD_SHOW_MISC) != 0) 3469 printk("%s: Single stepping at 0x%x\n", ahd_name(ahd), 3470 seqaddr); 3471 #endif 3472 if (stepping == FALSE) { 3473 3474 first_instr = seqaddr; 3475 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 3476 simode0 = ahd_inb(ahd, SIMODE0); 3477 simode3 = ahd_inb(ahd, SIMODE3); 3478 lqimode0 = ahd_inb(ahd, LQIMODE0); 3479 lqimode1 = ahd_inb(ahd, LQIMODE1); 3480 lqomode0 = ahd_inb(ahd, LQOMODE0); 3481 lqomode1 = ahd_inb(ahd, LQOMODE1); 3482 ahd_outb(ahd, SIMODE0, 0); 3483 ahd_outb(ahd, SIMODE3, 0); 3484 ahd_outb(ahd, LQIMODE0, 0); 3485 ahd_outb(ahd, LQIMODE1, 0); 3486 ahd_outb(ahd, LQOMODE0, 0); 3487 ahd_outb(ahd, LQOMODE1, 0); 3488 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 3489 simode1 = ahd_inb(ahd, SIMODE1); 3490 /* 3491 * We don't clear ENBUSFREE. Unfortunately 3492 * we cannot re-enable busfree detection within 3493 * the current connection, so we must leave it 3494 * on while single stepping. 3495 */ 3496 ahd_outb(ahd, SIMODE1, simode1 & ENBUSFREE); 3497 ahd_outb(ahd, SEQCTL0, ahd_inb(ahd, SEQCTL0) | STEP); 3498 stepping = TRUE; 3499 } 3500 ahd_outb(ahd, CLRSINT1, CLRBUSFREE); 3501 ahd_outb(ahd, CLRINT, CLRSCSIINT); 3502 ahd_set_modes(ahd, ahd->saved_src_mode, ahd->saved_dst_mode); 3503 ahd_outb(ahd, HCNTRL, ahd->unpause); 3504 while (!ahd_is_paused(ahd)) 3505 ahd_delay(200); 3506 ahd_update_modes(ahd); 3507 } 3508 if (stepping) { 3509 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 3510 ahd_outb(ahd, SIMODE0, simode0); 3511 ahd_outb(ahd, SIMODE3, simode3); 3512 ahd_outb(ahd, LQIMODE0, lqimode0); 3513 ahd_outb(ahd, LQIMODE1, lqimode1); 3514 ahd_outb(ahd, LQOMODE0, lqomode0); 3515 ahd_outb(ahd, LQOMODE1, lqomode1); 3516 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 3517 ahd_outb(ahd, SEQCTL0, ahd_inb(ahd, SEQCTL0) & ~STEP); 3518 ahd_outb(ahd, SIMODE1, simode1); 3519 /* 3520 * SCSIINT seems to glitch occasionally when 3521 * the interrupt masks are restored. Clear SCSIINT 3522 * one more time so that only persistent errors 3523 * are seen as a real interrupt. 3524 */ 3525 ahd_outb(ahd, CLRINT, CLRSCSIINT); 3526 } 3527 ahd_restore_modes(ahd, saved_modes); 3528 } 3529 3530 /* 3531 * Clear any pending interrupt status. 3532 */ 3533 static void 3534 ahd_clear_intstat(struct ahd_softc *ahd) 3535 { 3536 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK), 3537 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK)); 3538 /* Clear any interrupt conditions this may have caused */ 3539 ahd_outb(ahd, CLRLQIINT0, CLRLQIATNQAS|CLRLQICRCT1|CLRLQICRCT2 3540 |CLRLQIBADLQT|CLRLQIATNLQ|CLRLQIATNCMD); 3541 ahd_outb(ahd, CLRLQIINT1, CLRLQIPHASE_LQ|CLRLQIPHASE_NLQ|CLRLIQABORT 3542 |CLRLQICRCI_LQ|CLRLQICRCI_NLQ|CLRLQIBADLQI 3543 |CLRLQIOVERI_LQ|CLRLQIOVERI_NLQ|CLRNONPACKREQ); 3544 ahd_outb(ahd, CLRLQOINT0, CLRLQOTARGSCBPERR|CLRLQOSTOPT2|CLRLQOATNLQ 3545 |CLRLQOATNPKT|CLRLQOTCRC); 3546 ahd_outb(ahd, CLRLQOINT1, CLRLQOINITSCBPERR|CLRLQOSTOPI2|CLRLQOBADQAS 3547 |CLRLQOBUSFREE|CLRLQOPHACHGINPKT); 3548 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) { 3549 ahd_outb(ahd, CLRLQOINT0, 0); 3550 ahd_outb(ahd, CLRLQOINT1, 0); 3551 } 3552 ahd_outb(ahd, CLRSINT3, CLRNTRAMPERR|CLROSRAMPERR); 3553 ahd_outb(ahd, CLRSINT1, CLRSELTIMEO|CLRATNO|CLRSCSIRSTI 3554 |CLRBUSFREE|CLRSCSIPERR|CLRREQINIT); 3555 ahd_outb(ahd, CLRSINT0, CLRSELDO|CLRSELDI|CLRSELINGO 3556 |CLRIOERR|CLROVERRUN); 3557 ahd_outb(ahd, CLRINT, CLRSCSIINT); 3558 } 3559 3560 /**************************** Debugging Routines ******************************/ 3561 #ifdef AHD_DEBUG 3562 uint32_t ahd_debug = AHD_DEBUG_OPTS; 3563 #endif 3564 3565 #if 0 3566 void 3567 ahd_print_scb(struct scb *scb) 3568 { 3569 struct hardware_scb *hscb; 3570 int i; 3571 3572 hscb = scb->hscb; 3573 printk("scb:%p control:0x%x scsiid:0x%x lun:%d cdb_len:%d\n", 3574 (void *)scb, 3575 hscb->control, 3576 hscb->scsiid, 3577 hscb->lun, 3578 hscb->cdb_len); 3579 printk("Shared Data: "); 3580 for (i = 0; i < sizeof(hscb->shared_data.idata.cdb); i++) 3581 printk("%#02x", hscb->shared_data.idata.cdb[i]); 3582 printk(" dataptr:%#x%x datacnt:%#x sgptr:%#x tag:%#x\n", 3583 (uint32_t)((ahd_le64toh(hscb->dataptr) >> 32) & 0xFFFFFFFF), 3584 (uint32_t)(ahd_le64toh(hscb->dataptr) & 0xFFFFFFFF), 3585 ahd_le32toh(hscb->datacnt), 3586 ahd_le32toh(hscb->sgptr), 3587 SCB_GET_TAG(scb)); 3588 ahd_dump_sglist(scb); 3589 } 3590 #endif /* 0 */ 3591 3592 /************************* Transfer Negotiation *******************************/ 3593 /* 3594 * Allocate per target mode instance (ID we respond to as a target) 3595 * transfer negotiation data structures. 3596 */ 3597 static struct ahd_tmode_tstate * 3598 ahd_alloc_tstate(struct ahd_softc *ahd, u_int scsi_id, char channel) 3599 { 3600 struct ahd_tmode_tstate *master_tstate; 3601 struct ahd_tmode_tstate *tstate; 3602 int i; 3603 3604 master_tstate = ahd->enabled_targets[ahd->our_id]; 3605 if (ahd->enabled_targets[scsi_id] != NULL 3606 && ahd->enabled_targets[scsi_id] != master_tstate) 3607 panic("%s: ahd_alloc_tstate - Target already allocated", 3608 ahd_name(ahd)); 3609 tstate = kmalloc(sizeof(*tstate), GFP_ATOMIC); 3610 if (tstate == NULL) 3611 return (NULL); 3612 3613 /* 3614 * If we have allocated a master tstate, copy user settings from 3615 * the master tstate (taken from SRAM or the EEPROM) for this 3616 * channel, but reset our current and goal settings to async/narrow 3617 * until an initiator talks to us. 3618 */ 3619 if (master_tstate != NULL) { 3620 memcpy(tstate, master_tstate, sizeof(*tstate)); 3621 memset(tstate->enabled_luns, 0, sizeof(tstate->enabled_luns)); 3622 for (i = 0; i < 16; i++) { 3623 memset(&tstate->transinfo[i].curr, 0, 3624 sizeof(tstate->transinfo[i].curr)); 3625 memset(&tstate->transinfo[i].goal, 0, 3626 sizeof(tstate->transinfo[i].goal)); 3627 } 3628 } else 3629 memset(tstate, 0, sizeof(*tstate)); 3630 ahd->enabled_targets[scsi_id] = tstate; 3631 return (tstate); 3632 } 3633 3634 #ifdef AHD_TARGET_MODE 3635 /* 3636 * Free per target mode instance (ID we respond to as a target) 3637 * transfer negotiation data structures. 3638 */ 3639 static void 3640 ahd_free_tstate(struct ahd_softc *ahd, u_int scsi_id, char channel, int force) 3641 { 3642 struct ahd_tmode_tstate *tstate; 3643 3644 /* 3645 * Don't clean up our "master" tstate. 3646 * It has our default user settings. 3647 */ 3648 if (scsi_id == ahd->our_id 3649 && force == FALSE) 3650 return; 3651 3652 tstate = ahd->enabled_targets[scsi_id]; 3653 kfree(tstate); 3654 ahd->enabled_targets[scsi_id] = NULL; 3655 } 3656 #endif 3657 3658 /* 3659 * Called when we have an active connection to a target on the bus, 3660 * this function finds the nearest period to the input period limited 3661 * by the capabilities of the bus connectivity of and sync settings for 3662 * the target. 3663 */ 3664 static void 3665 ahd_devlimited_syncrate(struct ahd_softc *ahd, 3666 struct ahd_initiator_tinfo *tinfo, 3667 u_int *period, u_int *ppr_options, role_t role) 3668 { 3669 struct ahd_transinfo *transinfo; 3670 u_int maxsync; 3671 3672 if ((ahd_inb(ahd, SBLKCTL) & ENAB40) != 0 3673 && (ahd_inb(ahd, SSTAT2) & EXP_ACTIVE) == 0) { 3674 maxsync = AHD_SYNCRATE_PACED; 3675 } else { 3676 maxsync = AHD_SYNCRATE_ULTRA; 3677 /* Can't do DT related options on an SE bus */ 3678 *ppr_options &= MSG_EXT_PPR_QAS_REQ; 3679 } 3680 /* 3681 * Never allow a value higher than our current goal 3682 * period otherwise we may allow a target initiated 3683 * negotiation to go above the limit as set by the 3684 * user. In the case of an initiator initiated 3685 * sync negotiation, we limit based on the user 3686 * setting. This allows the system to still accept 3687 * incoming negotiations even if target initiated 3688 * negotiation is not performed. 3689 */ 3690 if (role == ROLE_TARGET) 3691 transinfo = &tinfo->user; 3692 else 3693 transinfo = &tinfo->goal; 3694 *ppr_options &= (transinfo->ppr_options|MSG_EXT_PPR_PCOMP_EN); 3695 if (transinfo->width == MSG_EXT_WDTR_BUS_8_BIT) { 3696 maxsync = max(maxsync, (u_int)AHD_SYNCRATE_ULTRA2); 3697 *ppr_options &= ~MSG_EXT_PPR_DT_REQ; 3698 } 3699 if (transinfo->period == 0) { 3700 *period = 0; 3701 *ppr_options = 0; 3702 } else { 3703 *period = max(*period, (u_int)transinfo->period); 3704 ahd_find_syncrate(ahd, period, ppr_options, maxsync); 3705 } 3706 } 3707 3708 /* 3709 * Look up the valid period to SCSIRATE conversion in our table. 3710 * Return the period and offset that should be sent to the target 3711 * if this was the beginning of an SDTR. 3712 */ 3713 void 3714 ahd_find_syncrate(struct ahd_softc *ahd, u_int *period, 3715 u_int *ppr_options, u_int maxsync) 3716 { 3717 if (*period < maxsync) 3718 *period = maxsync; 3719 3720 if ((*ppr_options & MSG_EXT_PPR_DT_REQ) != 0 3721 && *period > AHD_SYNCRATE_MIN_DT) 3722 *ppr_options &= ~MSG_EXT_PPR_DT_REQ; 3723 3724 if (*period > AHD_SYNCRATE_MIN) 3725 *period = 0; 3726 3727 /* Honor PPR option conformance rules. */ 3728 if (*period > AHD_SYNCRATE_PACED) 3729 *ppr_options &= ~MSG_EXT_PPR_RTI; 3730 3731 if ((*ppr_options & MSG_EXT_PPR_IU_REQ) == 0) 3732 *ppr_options &= (MSG_EXT_PPR_DT_REQ|MSG_EXT_PPR_QAS_REQ); 3733 3734 if ((*ppr_options & MSG_EXT_PPR_DT_REQ) == 0) 3735 *ppr_options &= MSG_EXT_PPR_QAS_REQ; 3736 3737 /* Skip all PACED only entries if IU is not available */ 3738 if ((*ppr_options & MSG_EXT_PPR_IU_REQ) == 0 3739 && *period < AHD_SYNCRATE_DT) 3740 *period = AHD_SYNCRATE_DT; 3741 3742 /* Skip all DT only entries if DT is not available */ 3743 if ((*ppr_options & MSG_EXT_PPR_DT_REQ) == 0 3744 && *period < AHD_SYNCRATE_ULTRA2) 3745 *period = AHD_SYNCRATE_ULTRA2; 3746 } 3747 3748 /* 3749 * Truncate the given synchronous offset to a value the 3750 * current adapter type and syncrate are capable of. 3751 */ 3752 static void 3753 ahd_validate_offset(struct ahd_softc *ahd, 3754 struct ahd_initiator_tinfo *tinfo, 3755 u_int period, u_int *offset, int wide, 3756 role_t role) 3757 { 3758 u_int maxoffset; 3759 3760 /* Limit offset to what we can do */ 3761 if (period == 0) 3762 maxoffset = 0; 3763 else if (period <= AHD_SYNCRATE_PACED) { 3764 if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0) 3765 maxoffset = MAX_OFFSET_PACED_BUG; 3766 else 3767 maxoffset = MAX_OFFSET_PACED; 3768 } else 3769 maxoffset = MAX_OFFSET_NON_PACED; 3770 *offset = min(*offset, maxoffset); 3771 if (tinfo != NULL) { 3772 if (role == ROLE_TARGET) 3773 *offset = min(*offset, (u_int)tinfo->user.offset); 3774 else 3775 *offset = min(*offset, (u_int)tinfo->goal.offset); 3776 } 3777 } 3778 3779 /* 3780 * Truncate the given transfer width parameter to a value the 3781 * current adapter type is capable of. 3782 */ 3783 static void 3784 ahd_validate_width(struct ahd_softc *ahd, struct ahd_initiator_tinfo *tinfo, 3785 u_int *bus_width, role_t role) 3786 { 3787 switch (*bus_width) { 3788 default: 3789 if (ahd->features & AHD_WIDE) { 3790 /* Respond Wide */ 3791 *bus_width = MSG_EXT_WDTR_BUS_16_BIT; 3792 break; 3793 } 3794 fallthrough; 3795 case MSG_EXT_WDTR_BUS_8_BIT: 3796 *bus_width = MSG_EXT_WDTR_BUS_8_BIT; 3797 break; 3798 } 3799 if (tinfo != NULL) { 3800 if (role == ROLE_TARGET) 3801 *bus_width = min((u_int)tinfo->user.width, *bus_width); 3802 else 3803 *bus_width = min((u_int)tinfo->goal.width, *bus_width); 3804 } 3805 } 3806 3807 /* 3808 * Update the bitmask of targets for which the controller should 3809 * negotiate with at the next convenient opportunity. This currently 3810 * means the next time we send the initial identify messages for 3811 * a new transaction. 3812 */ 3813 int 3814 ahd_update_neg_request(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3815 struct ahd_tmode_tstate *tstate, 3816 struct ahd_initiator_tinfo *tinfo, ahd_neg_type neg_type) 3817 { 3818 u_int auto_negotiate_orig; 3819 3820 auto_negotiate_orig = tstate->auto_negotiate; 3821 if (neg_type == AHD_NEG_ALWAYS) { 3822 /* 3823 * Force our "current" settings to be 3824 * unknown so that unless a bus reset 3825 * occurs the need to renegotiate is 3826 * recorded persistently. 3827 */ 3828 if ((ahd->features & AHD_WIDE) != 0) 3829 tinfo->curr.width = AHD_WIDTH_UNKNOWN; 3830 tinfo->curr.period = AHD_PERIOD_UNKNOWN; 3831 tinfo->curr.offset = AHD_OFFSET_UNKNOWN; 3832 } 3833 if (tinfo->curr.period != tinfo->goal.period 3834 || tinfo->curr.width != tinfo->goal.width 3835 || tinfo->curr.offset != tinfo->goal.offset 3836 || tinfo->curr.ppr_options != tinfo->goal.ppr_options 3837 || (neg_type == AHD_NEG_IF_NON_ASYNC 3838 && (tinfo->goal.offset != 0 3839 || tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT 3840 || tinfo->goal.ppr_options != 0))) 3841 tstate->auto_negotiate |= devinfo->target_mask; 3842 else 3843 tstate->auto_negotiate &= ~devinfo->target_mask; 3844 3845 return (auto_negotiate_orig != tstate->auto_negotiate); 3846 } 3847 3848 /* 3849 * Update the user/goal/curr tables of synchronous negotiation 3850 * parameters as well as, in the case of a current or active update, 3851 * any data structures on the host controller. In the case of an 3852 * active update, the specified target is currently talking to us on 3853 * the bus, so the transfer parameter update must take effect 3854 * immediately. 3855 */ 3856 void 3857 ahd_set_syncrate(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3858 u_int period, u_int offset, u_int ppr_options, 3859 u_int type, int paused) 3860 { 3861 struct ahd_initiator_tinfo *tinfo; 3862 struct ahd_tmode_tstate *tstate; 3863 u_int old_period; 3864 u_int old_offset; 3865 u_int old_ppr; 3866 int active; 3867 int update_needed; 3868 3869 active = (type & AHD_TRANS_ACTIVE) == AHD_TRANS_ACTIVE; 3870 update_needed = 0; 3871 3872 if (period == 0 || offset == 0) { 3873 period = 0; 3874 offset = 0; 3875 } 3876 3877 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid, 3878 devinfo->target, &tstate); 3879 3880 if ((type & AHD_TRANS_USER) != 0) { 3881 tinfo->user.period = period; 3882 tinfo->user.offset = offset; 3883 tinfo->user.ppr_options = ppr_options; 3884 } 3885 3886 if ((type & AHD_TRANS_GOAL) != 0) { 3887 tinfo->goal.period = period; 3888 tinfo->goal.offset = offset; 3889 tinfo->goal.ppr_options = ppr_options; 3890 } 3891 3892 old_period = tinfo->curr.period; 3893 old_offset = tinfo->curr.offset; 3894 old_ppr = tinfo->curr.ppr_options; 3895 3896 if ((type & AHD_TRANS_CUR) != 0 3897 && (old_period != period 3898 || old_offset != offset 3899 || old_ppr != ppr_options)) { 3900 3901 update_needed++; 3902 3903 tinfo->curr.period = period; 3904 tinfo->curr.offset = offset; 3905 tinfo->curr.ppr_options = ppr_options; 3906 3907 ahd_send_async(ahd, devinfo->channel, devinfo->target, 3908 CAM_LUN_WILDCARD, AC_TRANSFER_NEG); 3909 if (bootverbose) { 3910 if (offset != 0) { 3911 int options; 3912 3913 printk("%s: target %d synchronous with " 3914 "period = 0x%x, offset = 0x%x", 3915 ahd_name(ahd), devinfo->target, 3916 period, offset); 3917 options = 0; 3918 if ((ppr_options & MSG_EXT_PPR_RD_STRM) != 0) { 3919 printk("(RDSTRM"); 3920 options++; 3921 } 3922 if ((ppr_options & MSG_EXT_PPR_DT_REQ) != 0) { 3923 printk("%s", options ? "|DT" : "(DT"); 3924 options++; 3925 } 3926 if ((ppr_options & MSG_EXT_PPR_IU_REQ) != 0) { 3927 printk("%s", options ? "|IU" : "(IU"); 3928 options++; 3929 } 3930 if ((ppr_options & MSG_EXT_PPR_RTI) != 0) { 3931 printk("%s", options ? "|RTI" : "(RTI"); 3932 options++; 3933 } 3934 if ((ppr_options & MSG_EXT_PPR_QAS_REQ) != 0) { 3935 printk("%s", options ? "|QAS" : "(QAS"); 3936 options++; 3937 } 3938 if (options != 0) 3939 printk(")\n"); 3940 else 3941 printk("\n"); 3942 } else { 3943 printk("%s: target %d using " 3944 "asynchronous transfers%s\n", 3945 ahd_name(ahd), devinfo->target, 3946 (ppr_options & MSG_EXT_PPR_QAS_REQ) != 0 3947 ? "(QAS)" : ""); 3948 } 3949 } 3950 } 3951 /* 3952 * Always refresh the neg-table to handle the case of the 3953 * sequencer setting the ENATNO bit for a MK_MESSAGE request. 3954 * We will always renegotiate in that case if this is a 3955 * packetized request. Also manage the busfree expected flag 3956 * from this common routine so that we catch changes due to 3957 * WDTR or SDTR messages. 3958 */ 3959 if ((type & AHD_TRANS_CUR) != 0) { 3960 if (!paused) 3961 ahd_pause(ahd); 3962 ahd_update_neg_table(ahd, devinfo, &tinfo->curr); 3963 if (!paused) 3964 ahd_unpause(ahd); 3965 if (ahd->msg_type != MSG_TYPE_NONE) { 3966 if ((old_ppr & MSG_EXT_PPR_IU_REQ) 3967 != (ppr_options & MSG_EXT_PPR_IU_REQ)) { 3968 #ifdef AHD_DEBUG 3969 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 3970 ahd_print_devinfo(ahd, devinfo); 3971 printk("Expecting IU Change busfree\n"); 3972 } 3973 #endif 3974 ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE 3975 | MSG_FLAG_IU_REQ_CHANGED; 3976 } 3977 if ((old_ppr & MSG_EXT_PPR_IU_REQ) != 0) { 3978 #ifdef AHD_DEBUG 3979 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 3980 printk("PPR with IU_REQ outstanding\n"); 3981 #endif 3982 ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE; 3983 } 3984 } 3985 } 3986 3987 update_needed += ahd_update_neg_request(ahd, devinfo, tstate, 3988 tinfo, AHD_NEG_TO_GOAL); 3989 3990 if (update_needed && active) 3991 ahd_update_pending_scbs(ahd); 3992 } 3993 3994 /* 3995 * Update the user/goal/curr tables of wide negotiation 3996 * parameters as well as, in the case of a current or active update, 3997 * any data structures on the host controller. In the case of an 3998 * active update, the specified target is currently talking to us on 3999 * the bus, so the transfer parameter update must take effect 4000 * immediately. 4001 */ 4002 void 4003 ahd_set_width(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 4004 u_int width, u_int type, int paused) 4005 { 4006 struct ahd_initiator_tinfo *tinfo; 4007 struct ahd_tmode_tstate *tstate; 4008 u_int oldwidth; 4009 int active; 4010 int update_needed; 4011 4012 active = (type & AHD_TRANS_ACTIVE) == AHD_TRANS_ACTIVE; 4013 update_needed = 0; 4014 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid, 4015 devinfo->target, &tstate); 4016 4017 if ((type & AHD_TRANS_USER) != 0) 4018 tinfo->user.width = width; 4019 4020 if ((type & AHD_TRANS_GOAL) != 0) 4021 tinfo->goal.width = width; 4022 4023 oldwidth = tinfo->curr.width; 4024 if ((type & AHD_TRANS_CUR) != 0 && oldwidth != width) { 4025 4026 update_needed++; 4027 4028 tinfo->curr.width = width; 4029 ahd_send_async(ahd, devinfo->channel, devinfo->target, 4030 CAM_LUN_WILDCARD, AC_TRANSFER_NEG); 4031 if (bootverbose) { 4032 printk("%s: target %d using %dbit transfers\n", 4033 ahd_name(ahd), devinfo->target, 4034 8 * (0x01 << width)); 4035 } 4036 } 4037 4038 if ((type & AHD_TRANS_CUR) != 0) { 4039 if (!paused) 4040 ahd_pause(ahd); 4041 ahd_update_neg_table(ahd, devinfo, &tinfo->curr); 4042 if (!paused) 4043 ahd_unpause(ahd); 4044 } 4045 4046 update_needed += ahd_update_neg_request(ahd, devinfo, tstate, 4047 tinfo, AHD_NEG_TO_GOAL); 4048 if (update_needed && active) 4049 ahd_update_pending_scbs(ahd); 4050 4051 } 4052 4053 /* 4054 * Update the current state of tagged queuing for a given target. 4055 */ 4056 static void 4057 ahd_set_tags(struct ahd_softc *ahd, struct scsi_cmnd *cmd, 4058 struct ahd_devinfo *devinfo, ahd_queue_alg alg) 4059 { 4060 struct scsi_device *sdev = cmd->device; 4061 4062 ahd_platform_set_tags(ahd, sdev, devinfo, alg); 4063 ahd_send_async(ahd, devinfo->channel, devinfo->target, 4064 devinfo->lun, AC_TRANSFER_NEG); 4065 } 4066 4067 static void 4068 ahd_update_neg_table(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 4069 struct ahd_transinfo *tinfo) 4070 { 4071 ahd_mode_state saved_modes; 4072 u_int period; 4073 u_int ppr_opts; 4074 u_int con_opts; 4075 u_int offset; 4076 u_int saved_negoaddr; 4077 uint8_t iocell_opts[sizeof(ahd->iocell_opts)]; 4078 4079 saved_modes = ahd_save_modes(ahd); 4080 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 4081 4082 saved_negoaddr = ahd_inb(ahd, NEGOADDR); 4083 ahd_outb(ahd, NEGOADDR, devinfo->target); 4084 period = tinfo->period; 4085 offset = tinfo->offset; 4086 memcpy(iocell_opts, ahd->iocell_opts, sizeof(ahd->iocell_opts)); 4087 ppr_opts = tinfo->ppr_options & (MSG_EXT_PPR_QAS_REQ|MSG_EXT_PPR_DT_REQ 4088 |MSG_EXT_PPR_IU_REQ|MSG_EXT_PPR_RTI); 4089 con_opts = 0; 4090 if (period == 0) 4091 period = AHD_SYNCRATE_ASYNC; 4092 if (period == AHD_SYNCRATE_160) { 4093 4094 if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0) { 4095 /* 4096 * When the SPI4 spec was finalized, PACE transfers 4097 * was not made a configurable option in the PPR 4098 * message. Instead it is assumed to be enabled for 4099 * any syncrate faster than 80MHz. Nevertheless, 4100 * Harpoon2A4 allows this to be configurable. 4101 * 4102 * Harpoon2A4 also assumes at most 2 data bytes per 4103 * negotiated REQ/ACK offset. Paced transfers take 4104 * 4, so we must adjust our offset. 4105 */ 4106 ppr_opts |= PPROPT_PACE; 4107 offset *= 2; 4108 4109 /* 4110 * Harpoon2A assumed that there would be a 4111 * fallback rate between 160MHz and 80MHz, 4112 * so 7 is used as the period factor rather 4113 * than 8 for 160MHz. 4114 */ 4115 period = AHD_SYNCRATE_REVA_160; 4116 } 4117 if ((tinfo->ppr_options & MSG_EXT_PPR_PCOMP_EN) == 0) 4118 iocell_opts[AHD_PRECOMP_SLEW_INDEX] &= 4119 ~AHD_PRECOMP_MASK; 4120 } else { 4121 /* 4122 * Precomp should be disabled for non-paced transfers. 4123 */ 4124 iocell_opts[AHD_PRECOMP_SLEW_INDEX] &= ~AHD_PRECOMP_MASK; 4125 4126 if ((ahd->features & AHD_NEW_IOCELL_OPTS) != 0 4127 && (ppr_opts & MSG_EXT_PPR_DT_REQ) != 0 4128 && (ppr_opts & MSG_EXT_PPR_IU_REQ) == 0) { 4129 /* 4130 * Slow down our CRC interval to be 4131 * compatible with non-packetized 4132 * U160 devices that can't handle a 4133 * CRC at full speed. 4134 */ 4135 con_opts |= ENSLOWCRC; 4136 } 4137 4138 if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0) { 4139 /* 4140 * On H2A4, revert to a slower slewrate 4141 * on non-paced transfers. 4142 */ 4143 iocell_opts[AHD_PRECOMP_SLEW_INDEX] &= 4144 ~AHD_SLEWRATE_MASK; 4145 } 4146 } 4147 4148 ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_PRECOMP_SLEW); 4149 ahd_outb(ahd, ANNEXDAT, iocell_opts[AHD_PRECOMP_SLEW_INDEX]); 4150 ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_AMPLITUDE); 4151 ahd_outb(ahd, ANNEXDAT, iocell_opts[AHD_AMPLITUDE_INDEX]); 4152 4153 ahd_outb(ahd, NEGPERIOD, period); 4154 ahd_outb(ahd, NEGPPROPTS, ppr_opts); 4155 ahd_outb(ahd, NEGOFFSET, offset); 4156 4157 if (tinfo->width == MSG_EXT_WDTR_BUS_16_BIT) 4158 con_opts |= WIDEXFER; 4159 4160 /* 4161 * Slow down our CRC interval to be 4162 * compatible with packetized U320 devices 4163 * that can't handle a CRC at full speed 4164 */ 4165 if (ahd->features & AHD_AIC79XXB_SLOWCRC) { 4166 con_opts |= ENSLOWCRC; 4167 } 4168 4169 /* 4170 * During packetized transfers, the target will 4171 * give us the opportunity to send command packets 4172 * without us asserting attention. 4173 */ 4174 if ((tinfo->ppr_options & MSG_EXT_PPR_IU_REQ) == 0) 4175 con_opts |= ENAUTOATNO; 4176 ahd_outb(ahd, NEGCONOPTS, con_opts); 4177 ahd_outb(ahd, NEGOADDR, saved_negoaddr); 4178 ahd_restore_modes(ahd, saved_modes); 4179 } 4180 4181 /* 4182 * When the transfer settings for a connection change, setup for 4183 * negotiation in pending SCBs to effect the change as quickly as 4184 * possible. We also cancel any negotiations that are scheduled 4185 * for inflight SCBs that have not been started yet. 4186 */ 4187 static void 4188 ahd_update_pending_scbs(struct ahd_softc *ahd) 4189 { 4190 struct scb *pending_scb; 4191 int pending_scb_count; 4192 int paused; 4193 u_int saved_scbptr; 4194 ahd_mode_state saved_modes; 4195 4196 /* 4197 * Traverse the pending SCB list and ensure that all of the 4198 * SCBs there have the proper settings. We can only safely 4199 * clear the negotiation required flag (setting requires the 4200 * execution queue to be modified) and this is only possible 4201 * if we are not already attempting to select out for this 4202 * SCB. For this reason, all callers only call this routine 4203 * if we are changing the negotiation settings for the currently 4204 * active transaction on the bus. 4205 */ 4206 pending_scb_count = 0; 4207 LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) { 4208 struct ahd_devinfo devinfo; 4209 struct ahd_tmode_tstate *tstate; 4210 4211 ahd_scb_devinfo(ahd, &devinfo, pending_scb); 4212 ahd_fetch_transinfo(ahd, devinfo.channel, devinfo.our_scsiid, 4213 devinfo.target, &tstate); 4214 if ((tstate->auto_negotiate & devinfo.target_mask) == 0 4215 && (pending_scb->flags & SCB_AUTO_NEGOTIATE) != 0) { 4216 pending_scb->flags &= ~SCB_AUTO_NEGOTIATE; 4217 pending_scb->hscb->control &= ~MK_MESSAGE; 4218 } 4219 ahd_sync_scb(ahd, pending_scb, 4220 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 4221 pending_scb_count++; 4222 } 4223 4224 if (pending_scb_count == 0) 4225 return; 4226 4227 if (ahd_is_paused(ahd)) { 4228 paused = 1; 4229 } else { 4230 paused = 0; 4231 ahd_pause(ahd); 4232 } 4233 4234 /* 4235 * Force the sequencer to reinitialize the selection for 4236 * the command at the head of the execution queue if it 4237 * has already been setup. The negotiation changes may 4238 * effect whether we select-out with ATN. It is only 4239 * safe to clear ENSELO when the bus is not free and no 4240 * selection is in progres or completed. 4241 */ 4242 saved_modes = ahd_save_modes(ahd); 4243 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 4244 if ((ahd_inb(ahd, SCSISIGI) & BSYI) != 0 4245 && (ahd_inb(ahd, SSTAT0) & (SELDO|SELINGO)) == 0) 4246 ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO); 4247 saved_scbptr = ahd_get_scbptr(ahd); 4248 /* Ensure that the hscbs down on the card match the new information */ 4249 LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) { 4250 u_int scb_tag; 4251 u_int control; 4252 4253 scb_tag = SCB_GET_TAG(pending_scb); 4254 ahd_set_scbptr(ahd, scb_tag); 4255 control = ahd_inb_scbram(ahd, SCB_CONTROL); 4256 control &= ~MK_MESSAGE; 4257 control |= pending_scb->hscb->control & MK_MESSAGE; 4258 ahd_outb(ahd, SCB_CONTROL, control); 4259 } 4260 ahd_set_scbptr(ahd, saved_scbptr); 4261 ahd_restore_modes(ahd, saved_modes); 4262 4263 if (paused == 0) 4264 ahd_unpause(ahd); 4265 } 4266 4267 /**************************** Pathing Information *****************************/ 4268 static void 4269 ahd_fetch_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 4270 { 4271 ahd_mode_state saved_modes; 4272 u_int saved_scsiid; 4273 role_t role; 4274 int our_id; 4275 4276 saved_modes = ahd_save_modes(ahd); 4277 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 4278 4279 if (ahd_inb(ahd, SSTAT0) & TARGET) 4280 role = ROLE_TARGET; 4281 else 4282 role = ROLE_INITIATOR; 4283 4284 if (role == ROLE_TARGET 4285 && (ahd_inb(ahd, SEQ_FLAGS) & CMDPHASE_PENDING) != 0) { 4286 /* We were selected, so pull our id from TARGIDIN */ 4287 our_id = ahd_inb(ahd, TARGIDIN) & OID; 4288 } else if (role == ROLE_TARGET) 4289 our_id = ahd_inb(ahd, TOWNID); 4290 else 4291 our_id = ahd_inb(ahd, IOWNID); 4292 4293 saved_scsiid = ahd_inb(ahd, SAVED_SCSIID); 4294 ahd_compile_devinfo(devinfo, 4295 our_id, 4296 SCSIID_TARGET(ahd, saved_scsiid), 4297 ahd_inb(ahd, SAVED_LUN), 4298 SCSIID_CHANNEL(ahd, saved_scsiid), 4299 role); 4300 ahd_restore_modes(ahd, saved_modes); 4301 } 4302 4303 void 4304 ahd_print_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 4305 { 4306 printk("%s:%c:%d:%d: ", ahd_name(ahd), 'A', 4307 devinfo->target, devinfo->lun); 4308 } 4309 4310 static const struct ahd_phase_table_entry* 4311 ahd_lookup_phase_entry(int phase) 4312 { 4313 const struct ahd_phase_table_entry *entry; 4314 const struct ahd_phase_table_entry *last_entry; 4315 4316 /* 4317 * num_phases doesn't include the default entry which 4318 * will be returned if the phase doesn't match. 4319 */ 4320 last_entry = &ahd_phase_table[num_phases]; 4321 for (entry = ahd_phase_table; entry < last_entry; entry++) { 4322 if (phase == entry->phase) 4323 break; 4324 } 4325 return (entry); 4326 } 4327 4328 void 4329 ahd_compile_devinfo(struct ahd_devinfo *devinfo, u_int our_id, u_int target, 4330 u_int lun, char channel, role_t role) 4331 { 4332 devinfo->our_scsiid = our_id; 4333 devinfo->target = target; 4334 devinfo->lun = lun; 4335 devinfo->target_offset = target; 4336 devinfo->channel = channel; 4337 devinfo->role = role; 4338 if (channel == 'B') 4339 devinfo->target_offset += 8; 4340 devinfo->target_mask = (0x01 << devinfo->target_offset); 4341 } 4342 4343 static void 4344 ahd_scb_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 4345 struct scb *scb) 4346 { 4347 role_t role; 4348 int our_id; 4349 4350 our_id = SCSIID_OUR_ID(scb->hscb->scsiid); 4351 role = ROLE_INITIATOR; 4352 if ((scb->hscb->control & TARGET_SCB) != 0) 4353 role = ROLE_TARGET; 4354 ahd_compile_devinfo(devinfo, our_id, SCB_GET_TARGET(ahd, scb), 4355 SCB_GET_LUN(scb), SCB_GET_CHANNEL(ahd, scb), role); 4356 } 4357 4358 4359 /************************ Message Phase Processing ****************************/ 4360 /* 4361 * When an initiator transaction with the MK_MESSAGE flag either reconnects 4362 * or enters the initial message out phase, we are interrupted. Fill our 4363 * outgoing message buffer with the appropriate message and beging handing 4364 * the message phase(s) manually. 4365 */ 4366 static void 4367 ahd_setup_initiator_msgout(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 4368 struct scb *scb) 4369 { 4370 /* 4371 * To facilitate adding multiple messages together, 4372 * each routine should increment the index and len 4373 * variables instead of setting them explicitly. 4374 */ 4375 ahd->msgout_index = 0; 4376 ahd->msgout_len = 0; 4377 4378 if (ahd_currently_packetized(ahd)) 4379 ahd->msg_flags |= MSG_FLAG_PACKETIZED; 4380 4381 if (ahd->send_msg_perror 4382 && ahd_inb(ahd, MSG_OUT) == HOST_MSG) { 4383 ahd->msgout_buf[ahd->msgout_index++] = ahd->send_msg_perror; 4384 ahd->msgout_len++; 4385 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 4386 #ifdef AHD_DEBUG 4387 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 4388 printk("Setting up for Parity Error delivery\n"); 4389 #endif 4390 return; 4391 } else if (scb == NULL) { 4392 printk("%s: WARNING. No pending message for " 4393 "I_T msgin. Issuing NO-OP\n", ahd_name(ahd)); 4394 ahd->msgout_buf[ahd->msgout_index++] = MSG_NOOP; 4395 ahd->msgout_len++; 4396 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 4397 return; 4398 } 4399 4400 if ((scb->flags & SCB_DEVICE_RESET) == 0 4401 && (scb->flags & SCB_PACKETIZED) == 0 4402 && ahd_inb(ahd, MSG_OUT) == MSG_IDENTIFYFLAG) { 4403 u_int identify_msg; 4404 4405 identify_msg = MSG_IDENTIFYFLAG | SCB_GET_LUN(scb); 4406 if ((scb->hscb->control & DISCENB) != 0) 4407 identify_msg |= MSG_IDENTIFY_DISCFLAG; 4408 ahd->msgout_buf[ahd->msgout_index++] = identify_msg; 4409 ahd->msgout_len++; 4410 4411 if ((scb->hscb->control & TAG_ENB) != 0) { 4412 ahd->msgout_buf[ahd->msgout_index++] = 4413 scb->hscb->control & (TAG_ENB|SCB_TAG_TYPE); 4414 ahd->msgout_buf[ahd->msgout_index++] = SCB_GET_TAG(scb); 4415 ahd->msgout_len += 2; 4416 } 4417 } 4418 4419 if (scb->flags & SCB_DEVICE_RESET) { 4420 ahd->msgout_buf[ahd->msgout_index++] = MSG_BUS_DEV_RESET; 4421 ahd->msgout_len++; 4422 ahd_print_path(ahd, scb); 4423 printk("Bus Device Reset Message Sent\n"); 4424 /* 4425 * Clear our selection hardware in advance of 4426 * the busfree. We may have an entry in the waiting 4427 * Q for this target, and we don't want to go about 4428 * selecting while we handle the busfree and blow it 4429 * away. 4430 */ 4431 ahd_outb(ahd, SCSISEQ0, 0); 4432 } else if ((scb->flags & SCB_ABORT) != 0) { 4433 4434 if ((scb->hscb->control & TAG_ENB) != 0) { 4435 ahd->msgout_buf[ahd->msgout_index++] = MSG_ABORT_TAG; 4436 } else { 4437 ahd->msgout_buf[ahd->msgout_index++] = MSG_ABORT; 4438 } 4439 ahd->msgout_len++; 4440 ahd_print_path(ahd, scb); 4441 printk("Abort%s Message Sent\n", 4442 (scb->hscb->control & TAG_ENB) != 0 ? " Tag" : ""); 4443 /* 4444 * Clear our selection hardware in advance of 4445 * the busfree. We may have an entry in the waiting 4446 * Q for this target, and we don't want to go about 4447 * selecting while we handle the busfree and blow it 4448 * away. 4449 */ 4450 ahd_outb(ahd, SCSISEQ0, 0); 4451 } else if ((scb->flags & (SCB_AUTO_NEGOTIATE|SCB_NEGOTIATE)) != 0) { 4452 ahd_build_transfer_msg(ahd, devinfo); 4453 /* 4454 * Clear our selection hardware in advance of potential 4455 * PPR IU status change busfree. We may have an entry in 4456 * the waiting Q for this target, and we don't want to go 4457 * about selecting while we handle the busfree and blow 4458 * it away. 4459 */ 4460 ahd_outb(ahd, SCSISEQ0, 0); 4461 } else { 4462 printk("ahd_intr: AWAITING_MSG for an SCB that " 4463 "does not have a waiting message\n"); 4464 printk("SCSIID = %x, target_mask = %x\n", scb->hscb->scsiid, 4465 devinfo->target_mask); 4466 panic("SCB = %d, SCB Control = %x:%x, MSG_OUT = %x " 4467 "SCB flags = %x", SCB_GET_TAG(scb), scb->hscb->control, 4468 ahd_inb_scbram(ahd, SCB_CONTROL), ahd_inb(ahd, MSG_OUT), 4469 scb->flags); 4470 } 4471 4472 /* 4473 * Clear the MK_MESSAGE flag from the SCB so we aren't 4474 * asked to send this message again. 4475 */ 4476 ahd_outb(ahd, SCB_CONTROL, 4477 ahd_inb_scbram(ahd, SCB_CONTROL) & ~MK_MESSAGE); 4478 scb->hscb->control &= ~MK_MESSAGE; 4479 ahd->msgout_index = 0; 4480 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 4481 } 4482 4483 /* 4484 * Build an appropriate transfer negotiation message for the 4485 * currently active target. 4486 */ 4487 static void 4488 ahd_build_transfer_msg(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 4489 { 4490 /* 4491 * We need to initiate transfer negotiations. 4492 * If our current and goal settings are identical, 4493 * we want to renegotiate due to a check condition. 4494 */ 4495 struct ahd_initiator_tinfo *tinfo; 4496 struct ahd_tmode_tstate *tstate; 4497 int dowide; 4498 int dosync; 4499 int doppr; 4500 u_int period; 4501 u_int ppr_options; 4502 u_int offset; 4503 4504 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid, 4505 devinfo->target, &tstate); 4506 /* 4507 * Filter our period based on the current connection. 4508 * If we can't perform DT transfers on this segment (not in LVD 4509 * mode for instance), then our decision to issue a PPR message 4510 * may change. 4511 */ 4512 period = tinfo->goal.period; 4513 offset = tinfo->goal.offset; 4514 ppr_options = tinfo->goal.ppr_options; 4515 /* Target initiated PPR is not allowed in the SCSI spec */ 4516 if (devinfo->role == ROLE_TARGET) 4517 ppr_options = 0; 4518 ahd_devlimited_syncrate(ahd, tinfo, &period, 4519 &ppr_options, devinfo->role); 4520 dowide = tinfo->curr.width != tinfo->goal.width; 4521 dosync = tinfo->curr.offset != offset || tinfo->curr.period != period; 4522 /* 4523 * Only use PPR if we have options that need it, even if the device 4524 * claims to support it. There might be an expander in the way 4525 * that doesn't. 4526 */ 4527 doppr = ppr_options != 0; 4528 4529 if (!dowide && !dosync && !doppr) { 4530 dowide = tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT; 4531 dosync = tinfo->goal.offset != 0; 4532 } 4533 4534 if (!dowide && !dosync && !doppr) { 4535 /* 4536 * Force async with a WDTR message if we have a wide bus, 4537 * or just issue an SDTR with a 0 offset. 4538 */ 4539 if ((ahd->features & AHD_WIDE) != 0) 4540 dowide = 1; 4541 else 4542 dosync = 1; 4543 4544 if (bootverbose) { 4545 ahd_print_devinfo(ahd, devinfo); 4546 printk("Ensuring async\n"); 4547 } 4548 } 4549 /* Target initiated PPR is not allowed in the SCSI spec */ 4550 if (devinfo->role == ROLE_TARGET) 4551 doppr = 0; 4552 4553 /* 4554 * Both the PPR message and SDTR message require the 4555 * goal syncrate to be limited to what the target device 4556 * is capable of handling (based on whether an LVD->SE 4557 * expander is on the bus), so combine these two cases. 4558 * Regardless, guarantee that if we are using WDTR and SDTR 4559 * messages that WDTR comes first. 4560 */ 4561 if (doppr || (dosync && !dowide)) { 4562 4563 offset = tinfo->goal.offset; 4564 ahd_validate_offset(ahd, tinfo, period, &offset, 4565 doppr ? tinfo->goal.width 4566 : tinfo->curr.width, 4567 devinfo->role); 4568 if (doppr) { 4569 ahd_construct_ppr(ahd, devinfo, period, offset, 4570 tinfo->goal.width, ppr_options); 4571 } else { 4572 ahd_construct_sdtr(ahd, devinfo, period, offset); 4573 } 4574 } else { 4575 ahd_construct_wdtr(ahd, devinfo, tinfo->goal.width); 4576 } 4577 } 4578 4579 /* 4580 * Build a synchronous negotiation message in our message 4581 * buffer based on the input parameters. 4582 */ 4583 static void 4584 ahd_construct_sdtr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 4585 u_int period, u_int offset) 4586 { 4587 if (offset == 0) 4588 period = AHD_ASYNC_XFER_PERIOD; 4589 ahd->msgout_index += spi_populate_sync_msg( 4590 ahd->msgout_buf + ahd->msgout_index, period, offset); 4591 ahd->msgout_len += 5; 4592 if (bootverbose) { 4593 printk("(%s:%c:%d:%d): Sending SDTR period %x, offset %x\n", 4594 ahd_name(ahd), devinfo->channel, devinfo->target, 4595 devinfo->lun, period, offset); 4596 } 4597 } 4598 4599 /* 4600 * Build a wide negotiateion message in our message 4601 * buffer based on the input parameters. 4602 */ 4603 static void 4604 ahd_construct_wdtr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 4605 u_int bus_width) 4606 { 4607 ahd->msgout_index += spi_populate_width_msg( 4608 ahd->msgout_buf + ahd->msgout_index, bus_width); 4609 ahd->msgout_len += 4; 4610 if (bootverbose) { 4611 printk("(%s:%c:%d:%d): Sending WDTR %x\n", 4612 ahd_name(ahd), devinfo->channel, devinfo->target, 4613 devinfo->lun, bus_width); 4614 } 4615 } 4616 4617 /* 4618 * Build a parallel protocol request message in our message 4619 * buffer based on the input parameters. 4620 */ 4621 static void 4622 ahd_construct_ppr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 4623 u_int period, u_int offset, u_int bus_width, 4624 u_int ppr_options) 4625 { 4626 /* 4627 * Always request precompensation from 4628 * the other target if we are running 4629 * at paced syncrates. 4630 */ 4631 if (period <= AHD_SYNCRATE_PACED) 4632 ppr_options |= MSG_EXT_PPR_PCOMP_EN; 4633 if (offset == 0) 4634 period = AHD_ASYNC_XFER_PERIOD; 4635 ahd->msgout_index += spi_populate_ppr_msg( 4636 ahd->msgout_buf + ahd->msgout_index, period, offset, 4637 bus_width, ppr_options); 4638 ahd->msgout_len += 8; 4639 if (bootverbose) { 4640 printk("(%s:%c:%d:%d): Sending PPR bus_width %x, period %x, " 4641 "offset %x, ppr_options %x\n", ahd_name(ahd), 4642 devinfo->channel, devinfo->target, devinfo->lun, 4643 bus_width, period, offset, ppr_options); 4644 } 4645 } 4646 4647 /* 4648 * Clear any active message state. 4649 */ 4650 static void 4651 ahd_clear_msg_state(struct ahd_softc *ahd) 4652 { 4653 ahd_mode_state saved_modes; 4654 4655 saved_modes = ahd_save_modes(ahd); 4656 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 4657 ahd->send_msg_perror = 0; 4658 ahd->msg_flags = MSG_FLAG_NONE; 4659 ahd->msgout_len = 0; 4660 ahd->msgin_index = 0; 4661 ahd->msg_type = MSG_TYPE_NONE; 4662 if ((ahd_inb(ahd, SCSISIGO) & ATNO) != 0) { 4663 /* 4664 * The target didn't care to respond to our 4665 * message request, so clear ATN. 4666 */ 4667 ahd_outb(ahd, CLRSINT1, CLRATNO); 4668 } 4669 ahd_outb(ahd, MSG_OUT, MSG_NOOP); 4670 ahd_outb(ahd, SEQ_FLAGS2, 4671 ahd_inb(ahd, SEQ_FLAGS2) & ~TARGET_MSG_PENDING); 4672 ahd_restore_modes(ahd, saved_modes); 4673 } 4674 4675 /* 4676 * Manual message loop handler. 4677 */ 4678 static void 4679 ahd_handle_message_phase(struct ahd_softc *ahd) 4680 { 4681 struct ahd_devinfo devinfo; 4682 u_int bus_phase; 4683 int end_session; 4684 4685 ahd_fetch_devinfo(ahd, &devinfo); 4686 end_session = FALSE; 4687 bus_phase = ahd_inb(ahd, LASTPHASE); 4688 4689 if ((ahd_inb(ahd, LQISTAT2) & LQIPHASE_OUTPKT) != 0) { 4690 printk("LQIRETRY for LQIPHASE_OUTPKT\n"); 4691 ahd_outb(ahd, LQCTL2, LQIRETRY); 4692 } 4693 reswitch: 4694 switch (ahd->msg_type) { 4695 case MSG_TYPE_INITIATOR_MSGOUT: 4696 { 4697 int lastbyte; 4698 int phasemis; 4699 int msgdone; 4700 4701 if (ahd->msgout_len == 0 && ahd->send_msg_perror == 0) 4702 panic("HOST_MSG_LOOP interrupt with no active message"); 4703 4704 #ifdef AHD_DEBUG 4705 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 4706 ahd_print_devinfo(ahd, &devinfo); 4707 printk("INITIATOR_MSG_OUT"); 4708 } 4709 #endif 4710 phasemis = bus_phase != P_MESGOUT; 4711 if (phasemis) { 4712 #ifdef AHD_DEBUG 4713 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 4714 printk(" PHASEMIS %s\n", 4715 ahd_lookup_phase_entry(bus_phase) 4716 ->phasemsg); 4717 } 4718 #endif 4719 if (bus_phase == P_MESGIN) { 4720 /* 4721 * Change gears and see if 4722 * this messages is of interest to 4723 * us or should be passed back to 4724 * the sequencer. 4725 */ 4726 ahd_outb(ahd, CLRSINT1, CLRATNO); 4727 ahd->send_msg_perror = 0; 4728 ahd->msg_type = MSG_TYPE_INITIATOR_MSGIN; 4729 ahd->msgin_index = 0; 4730 goto reswitch; 4731 } 4732 end_session = TRUE; 4733 break; 4734 } 4735 4736 if (ahd->send_msg_perror) { 4737 ahd_outb(ahd, CLRSINT1, CLRATNO); 4738 ahd_outb(ahd, CLRSINT1, CLRREQINIT); 4739 #ifdef AHD_DEBUG 4740 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 4741 printk(" byte 0x%x\n", ahd->send_msg_perror); 4742 #endif 4743 /* 4744 * If we are notifying the target of a CRC error 4745 * during packetized operations, the target is 4746 * within its rights to acknowledge our message 4747 * with a busfree. 4748 */ 4749 if ((ahd->msg_flags & MSG_FLAG_PACKETIZED) != 0 4750 && ahd->send_msg_perror == MSG_INITIATOR_DET_ERR) 4751 ahd->msg_flags |= MSG_FLAG_EXPECT_IDE_BUSFREE; 4752 4753 ahd_outb(ahd, RETURN_2, ahd->send_msg_perror); 4754 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_WRITE); 4755 break; 4756 } 4757 4758 msgdone = ahd->msgout_index == ahd->msgout_len; 4759 if (msgdone) { 4760 /* 4761 * The target has requested a retry. 4762 * Re-assert ATN, reset our message index to 4763 * 0, and try again. 4764 */ 4765 ahd->msgout_index = 0; 4766 ahd_assert_atn(ahd); 4767 } 4768 4769 lastbyte = ahd->msgout_index == (ahd->msgout_len - 1); 4770 if (lastbyte) { 4771 /* Last byte is signified by dropping ATN */ 4772 ahd_outb(ahd, CLRSINT1, CLRATNO); 4773 } 4774 4775 /* 4776 * Clear our interrupt status and present 4777 * the next byte on the bus. 4778 */ 4779 ahd_outb(ahd, CLRSINT1, CLRREQINIT); 4780 #ifdef AHD_DEBUG 4781 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 4782 printk(" byte 0x%x\n", 4783 ahd->msgout_buf[ahd->msgout_index]); 4784 #endif 4785 ahd_outb(ahd, RETURN_2, ahd->msgout_buf[ahd->msgout_index++]); 4786 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_WRITE); 4787 break; 4788 } 4789 case MSG_TYPE_INITIATOR_MSGIN: 4790 { 4791 int phasemis; 4792 int message_done; 4793 4794 #ifdef AHD_DEBUG 4795 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 4796 ahd_print_devinfo(ahd, &devinfo); 4797 printk("INITIATOR_MSG_IN"); 4798 } 4799 #endif 4800 phasemis = bus_phase != P_MESGIN; 4801 if (phasemis) { 4802 #ifdef AHD_DEBUG 4803 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 4804 printk(" PHASEMIS %s\n", 4805 ahd_lookup_phase_entry(bus_phase) 4806 ->phasemsg); 4807 } 4808 #endif 4809 ahd->msgin_index = 0; 4810 if (bus_phase == P_MESGOUT 4811 && (ahd->send_msg_perror != 0 4812 || (ahd->msgout_len != 0 4813 && ahd->msgout_index == 0))) { 4814 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 4815 goto reswitch; 4816 } 4817 end_session = TRUE; 4818 break; 4819 } 4820 4821 /* Pull the byte in without acking it */ 4822 ahd->msgin_buf[ahd->msgin_index] = ahd_inb(ahd, SCSIBUS); 4823 #ifdef AHD_DEBUG 4824 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 4825 printk(" byte 0x%x\n", 4826 ahd->msgin_buf[ahd->msgin_index]); 4827 #endif 4828 4829 message_done = ahd_parse_msg(ahd, &devinfo); 4830 4831 if (message_done) { 4832 /* 4833 * Clear our incoming message buffer in case there 4834 * is another message following this one. 4835 */ 4836 ahd->msgin_index = 0; 4837 4838 /* 4839 * If this message illicited a response, 4840 * assert ATN so the target takes us to the 4841 * message out phase. 4842 */ 4843 if (ahd->msgout_len != 0) { 4844 #ifdef AHD_DEBUG 4845 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 4846 ahd_print_devinfo(ahd, &devinfo); 4847 printk("Asserting ATN for response\n"); 4848 } 4849 #endif 4850 ahd_assert_atn(ahd); 4851 } 4852 } else 4853 ahd->msgin_index++; 4854 4855 if (message_done == MSGLOOP_TERMINATED) { 4856 end_session = TRUE; 4857 } else { 4858 /* Ack the byte */ 4859 ahd_outb(ahd, CLRSINT1, CLRREQINIT); 4860 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_READ); 4861 } 4862 break; 4863 } 4864 case MSG_TYPE_TARGET_MSGIN: 4865 { 4866 int msgdone; 4867 int msgout_request; 4868 4869 /* 4870 * By default, the message loop will continue. 4871 */ 4872 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_TARG); 4873 4874 if (ahd->msgout_len == 0) 4875 panic("Target MSGIN with no active message"); 4876 4877 /* 4878 * If we interrupted a mesgout session, the initiator 4879 * will not know this until our first REQ. So, we 4880 * only honor mesgout requests after we've sent our 4881 * first byte. 4882 */ 4883 if ((ahd_inb(ahd, SCSISIGI) & ATNI) != 0 4884 && ahd->msgout_index > 0) 4885 msgout_request = TRUE; 4886 else 4887 msgout_request = FALSE; 4888 4889 if (msgout_request) { 4890 4891 /* 4892 * Change gears and see if 4893 * this messages is of interest to 4894 * us or should be passed back to 4895 * the sequencer. 4896 */ 4897 ahd->msg_type = MSG_TYPE_TARGET_MSGOUT; 4898 ahd_outb(ahd, SCSISIGO, P_MESGOUT | BSYO); 4899 ahd->msgin_index = 0; 4900 /* Dummy read to REQ for first byte */ 4901 ahd_inb(ahd, SCSIDAT); 4902 ahd_outb(ahd, SXFRCTL0, 4903 ahd_inb(ahd, SXFRCTL0) | SPIOEN); 4904 break; 4905 } 4906 4907 msgdone = ahd->msgout_index == ahd->msgout_len; 4908 if (msgdone) { 4909 ahd_outb(ahd, SXFRCTL0, 4910 ahd_inb(ahd, SXFRCTL0) & ~SPIOEN); 4911 end_session = TRUE; 4912 break; 4913 } 4914 4915 /* 4916 * Present the next byte on the bus. 4917 */ 4918 ahd_outb(ahd, SXFRCTL0, ahd_inb(ahd, SXFRCTL0) | SPIOEN); 4919 ahd_outb(ahd, SCSIDAT, ahd->msgout_buf[ahd->msgout_index++]); 4920 break; 4921 } 4922 case MSG_TYPE_TARGET_MSGOUT: 4923 { 4924 int lastbyte; 4925 int msgdone; 4926 4927 /* 4928 * By default, the message loop will continue. 4929 */ 4930 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_TARG); 4931 4932 /* 4933 * The initiator signals that this is 4934 * the last byte by dropping ATN. 4935 */ 4936 lastbyte = (ahd_inb(ahd, SCSISIGI) & ATNI) == 0; 4937 4938 /* 4939 * Read the latched byte, but turn off SPIOEN first 4940 * so that we don't inadvertently cause a REQ for the 4941 * next byte. 4942 */ 4943 ahd_outb(ahd, SXFRCTL0, ahd_inb(ahd, SXFRCTL0) & ~SPIOEN); 4944 ahd->msgin_buf[ahd->msgin_index] = ahd_inb(ahd, SCSIDAT); 4945 msgdone = ahd_parse_msg(ahd, &devinfo); 4946 if (msgdone == MSGLOOP_TERMINATED) { 4947 /* 4948 * The message is *really* done in that it caused 4949 * us to go to bus free. The sequencer has already 4950 * been reset at this point, so pull the ejection 4951 * handle. 4952 */ 4953 return; 4954 } 4955 4956 ahd->msgin_index++; 4957 4958 /* 4959 * XXX Read spec about initiator dropping ATN too soon 4960 * and use msgdone to detect it. 4961 */ 4962 if (msgdone == MSGLOOP_MSGCOMPLETE) { 4963 ahd->msgin_index = 0; 4964 4965 /* 4966 * If this message illicited a response, transition 4967 * to the Message in phase and send it. 4968 */ 4969 if (ahd->msgout_len != 0) { 4970 ahd_outb(ahd, SCSISIGO, P_MESGIN | BSYO); 4971 ahd_outb(ahd, SXFRCTL0, 4972 ahd_inb(ahd, SXFRCTL0) | SPIOEN); 4973 ahd->msg_type = MSG_TYPE_TARGET_MSGIN; 4974 ahd->msgin_index = 0; 4975 break; 4976 } 4977 } 4978 4979 if (lastbyte) 4980 end_session = TRUE; 4981 else { 4982 /* Ask for the next byte. */ 4983 ahd_outb(ahd, SXFRCTL0, 4984 ahd_inb(ahd, SXFRCTL0) | SPIOEN); 4985 } 4986 4987 break; 4988 } 4989 default: 4990 panic("Unknown REQINIT message type"); 4991 } 4992 4993 if (end_session) { 4994 if ((ahd->msg_flags & MSG_FLAG_PACKETIZED) != 0) { 4995 printk("%s: Returning to Idle Loop\n", 4996 ahd_name(ahd)); 4997 ahd_clear_msg_state(ahd); 4998 4999 /* 5000 * Perform the equivalent of a clear_target_state. 5001 */ 5002 ahd_outb(ahd, LASTPHASE, P_BUSFREE); 5003 ahd_outb(ahd, SEQ_FLAGS, NOT_IDENTIFIED|NO_CDB_SENT); 5004 ahd_outb(ahd, SEQCTL0, FASTMODE|SEQRESET); 5005 } else { 5006 ahd_clear_msg_state(ahd); 5007 ahd_outb(ahd, RETURN_1, EXIT_MSG_LOOP); 5008 } 5009 } 5010 } 5011 5012 /* 5013 * See if we sent a particular extended message to the target. 5014 * If "full" is true, return true only if the target saw the full 5015 * message. If "full" is false, return true if the target saw at 5016 * least the first byte of the message. 5017 */ 5018 static int 5019 ahd_sent_msg(struct ahd_softc *ahd, ahd_msgtype type, u_int msgval, int full) 5020 { 5021 int found; 5022 u_int index; 5023 5024 found = FALSE; 5025 index = 0; 5026 5027 while (index < ahd->msgout_len) { 5028 if (ahd->msgout_buf[index] == MSG_EXTENDED) { 5029 u_int end_index; 5030 5031 end_index = index + 1 + ahd->msgout_buf[index + 1]; 5032 if (ahd->msgout_buf[index+2] == msgval 5033 && type == AHDMSG_EXT) { 5034 5035 if (full) { 5036 if (ahd->msgout_index > end_index) 5037 found = TRUE; 5038 } else if (ahd->msgout_index > index) 5039 found = TRUE; 5040 } 5041 index = end_index; 5042 } else if (ahd->msgout_buf[index] >= MSG_SIMPLE_TASK 5043 && ahd->msgout_buf[index] <= MSG_IGN_WIDE_RESIDUE) { 5044 5045 /* Skip tag type and tag id or residue param*/ 5046 index += 2; 5047 } else { 5048 /* Single byte message */ 5049 if (type == AHDMSG_1B 5050 && ahd->msgout_index > index 5051 && (ahd->msgout_buf[index] == msgval 5052 || ((ahd->msgout_buf[index] & MSG_IDENTIFYFLAG) != 0 5053 && msgval == MSG_IDENTIFYFLAG))) 5054 found = TRUE; 5055 index++; 5056 } 5057 5058 if (found) 5059 break; 5060 } 5061 return (found); 5062 } 5063 5064 /* 5065 * Wait for a complete incoming message, parse it, and respond accordingly. 5066 */ 5067 static int 5068 ahd_parse_msg(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 5069 { 5070 struct ahd_initiator_tinfo *tinfo; 5071 struct ahd_tmode_tstate *tstate; 5072 int reject; 5073 int done; 5074 int response; 5075 5076 done = MSGLOOP_IN_PROG; 5077 response = FALSE; 5078 reject = FALSE; 5079 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid, 5080 devinfo->target, &tstate); 5081 5082 /* 5083 * Parse as much of the message as is available, 5084 * rejecting it if we don't support it. When 5085 * the entire message is available and has been 5086 * handled, return MSGLOOP_MSGCOMPLETE, indicating 5087 * that we have parsed an entire message. 5088 * 5089 * In the case of extended messages, we accept the length 5090 * byte outright and perform more checking once we know the 5091 * extended message type. 5092 */ 5093 switch (ahd->msgin_buf[0]) { 5094 case MSG_DISCONNECT: 5095 case MSG_SAVEDATAPOINTER: 5096 case MSG_CMDCOMPLETE: 5097 case MSG_RESTOREPOINTERS: 5098 case MSG_IGN_WIDE_RESIDUE: 5099 /* 5100 * End our message loop as these are messages 5101 * the sequencer handles on its own. 5102 */ 5103 done = MSGLOOP_TERMINATED; 5104 break; 5105 case MSG_MESSAGE_REJECT: 5106 response = ahd_handle_msg_reject(ahd, devinfo); 5107 fallthrough; 5108 case MSG_NOOP: 5109 done = MSGLOOP_MSGCOMPLETE; 5110 break; 5111 case MSG_EXTENDED: 5112 { 5113 /* Wait for enough of the message to begin validation */ 5114 if (ahd->msgin_index < 2) 5115 break; 5116 switch (ahd->msgin_buf[2]) { 5117 case MSG_EXT_SDTR: 5118 { 5119 u_int period; 5120 u_int ppr_options; 5121 u_int offset; 5122 u_int saved_offset; 5123 5124 if (ahd->msgin_buf[1] != MSG_EXT_SDTR_LEN) { 5125 reject = TRUE; 5126 break; 5127 } 5128 5129 /* 5130 * Wait until we have both args before validating 5131 * and acting on this message. 5132 * 5133 * Add one to MSG_EXT_SDTR_LEN to account for 5134 * the extended message preamble. 5135 */ 5136 if (ahd->msgin_index < (MSG_EXT_SDTR_LEN + 1)) 5137 break; 5138 5139 period = ahd->msgin_buf[3]; 5140 ppr_options = 0; 5141 saved_offset = offset = ahd->msgin_buf[4]; 5142 ahd_devlimited_syncrate(ahd, tinfo, &period, 5143 &ppr_options, devinfo->role); 5144 ahd_validate_offset(ahd, tinfo, period, &offset, 5145 tinfo->curr.width, devinfo->role); 5146 if (bootverbose) { 5147 printk("(%s:%c:%d:%d): Received " 5148 "SDTR period %x, offset %x\n\t" 5149 "Filtered to period %x, offset %x\n", 5150 ahd_name(ahd), devinfo->channel, 5151 devinfo->target, devinfo->lun, 5152 ahd->msgin_buf[3], saved_offset, 5153 period, offset); 5154 } 5155 ahd_set_syncrate(ahd, devinfo, period, 5156 offset, ppr_options, 5157 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 5158 /*paused*/TRUE); 5159 5160 /* 5161 * See if we initiated Sync Negotiation 5162 * and didn't have to fall down to async 5163 * transfers. 5164 */ 5165 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, TRUE)) { 5166 /* We started it */ 5167 if (saved_offset != offset) { 5168 /* Went too low - force async */ 5169 reject = TRUE; 5170 } 5171 } else { 5172 /* 5173 * Send our own SDTR in reply 5174 */ 5175 if (bootverbose 5176 && devinfo->role == ROLE_INITIATOR) { 5177 printk("(%s:%c:%d:%d): Target " 5178 "Initiated SDTR\n", 5179 ahd_name(ahd), devinfo->channel, 5180 devinfo->target, devinfo->lun); 5181 } 5182 ahd->msgout_index = 0; 5183 ahd->msgout_len = 0; 5184 ahd_construct_sdtr(ahd, devinfo, 5185 period, offset); 5186 ahd->msgout_index = 0; 5187 response = TRUE; 5188 } 5189 done = MSGLOOP_MSGCOMPLETE; 5190 break; 5191 } 5192 case MSG_EXT_WDTR: 5193 { 5194 u_int bus_width; 5195 u_int saved_width; 5196 u_int sending_reply; 5197 5198 sending_reply = FALSE; 5199 if (ahd->msgin_buf[1] != MSG_EXT_WDTR_LEN) { 5200 reject = TRUE; 5201 break; 5202 } 5203 5204 /* 5205 * Wait until we have our arg before validating 5206 * and acting on this message. 5207 * 5208 * Add one to MSG_EXT_WDTR_LEN to account for 5209 * the extended message preamble. 5210 */ 5211 if (ahd->msgin_index < (MSG_EXT_WDTR_LEN + 1)) 5212 break; 5213 5214 bus_width = ahd->msgin_buf[3]; 5215 saved_width = bus_width; 5216 ahd_validate_width(ahd, tinfo, &bus_width, 5217 devinfo->role); 5218 if (bootverbose) { 5219 printk("(%s:%c:%d:%d): Received WDTR " 5220 "%x filtered to %x\n", 5221 ahd_name(ahd), devinfo->channel, 5222 devinfo->target, devinfo->lun, 5223 saved_width, bus_width); 5224 } 5225 5226 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, TRUE)) { 5227 /* 5228 * Don't send a WDTR back to the 5229 * target, since we asked first. 5230 * If the width went higher than our 5231 * request, reject it. 5232 */ 5233 if (saved_width > bus_width) { 5234 reject = TRUE; 5235 printk("(%s:%c:%d:%d): requested %dBit " 5236 "transfers. Rejecting...\n", 5237 ahd_name(ahd), devinfo->channel, 5238 devinfo->target, devinfo->lun, 5239 8 * (0x01 << bus_width)); 5240 bus_width = 0; 5241 } 5242 } else { 5243 /* 5244 * Send our own WDTR in reply 5245 */ 5246 if (bootverbose 5247 && devinfo->role == ROLE_INITIATOR) { 5248 printk("(%s:%c:%d:%d): Target " 5249 "Initiated WDTR\n", 5250 ahd_name(ahd), devinfo->channel, 5251 devinfo->target, devinfo->lun); 5252 } 5253 ahd->msgout_index = 0; 5254 ahd->msgout_len = 0; 5255 ahd_construct_wdtr(ahd, devinfo, bus_width); 5256 ahd->msgout_index = 0; 5257 response = TRUE; 5258 sending_reply = TRUE; 5259 } 5260 /* 5261 * After a wide message, we are async, but 5262 * some devices don't seem to honor this portion 5263 * of the spec. Force a renegotiation of the 5264 * sync component of our transfer agreement even 5265 * if our goal is async. By updating our width 5266 * after forcing the negotiation, we avoid 5267 * renegotiating for width. 5268 */ 5269 ahd_update_neg_request(ahd, devinfo, tstate, 5270 tinfo, AHD_NEG_ALWAYS); 5271 ahd_set_width(ahd, devinfo, bus_width, 5272 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 5273 /*paused*/TRUE); 5274 if (sending_reply == FALSE && reject == FALSE) { 5275 5276 /* 5277 * We will always have an SDTR to send. 5278 */ 5279 ahd->msgout_index = 0; 5280 ahd->msgout_len = 0; 5281 ahd_build_transfer_msg(ahd, devinfo); 5282 ahd->msgout_index = 0; 5283 response = TRUE; 5284 } 5285 done = MSGLOOP_MSGCOMPLETE; 5286 break; 5287 } 5288 case MSG_EXT_PPR: 5289 { 5290 u_int period; 5291 u_int offset; 5292 u_int bus_width; 5293 u_int ppr_options; 5294 u_int saved_width; 5295 u_int saved_offset; 5296 u_int saved_ppr_options; 5297 5298 if (ahd->msgin_buf[1] != MSG_EXT_PPR_LEN) { 5299 reject = TRUE; 5300 break; 5301 } 5302 5303 /* 5304 * Wait until we have all args before validating 5305 * and acting on this message. 5306 * 5307 * Add one to MSG_EXT_PPR_LEN to account for 5308 * the extended message preamble. 5309 */ 5310 if (ahd->msgin_index < (MSG_EXT_PPR_LEN + 1)) 5311 break; 5312 5313 period = ahd->msgin_buf[3]; 5314 offset = ahd->msgin_buf[5]; 5315 bus_width = ahd->msgin_buf[6]; 5316 saved_width = bus_width; 5317 ppr_options = ahd->msgin_buf[7]; 5318 /* 5319 * According to the spec, a DT only 5320 * period factor with no DT option 5321 * set implies async. 5322 */ 5323 if ((ppr_options & MSG_EXT_PPR_DT_REQ) == 0 5324 && period <= 9) 5325 offset = 0; 5326 saved_ppr_options = ppr_options; 5327 saved_offset = offset; 5328 5329 /* 5330 * Transfer options are only available if we 5331 * are negotiating wide. 5332 */ 5333 if (bus_width == 0) 5334 ppr_options &= MSG_EXT_PPR_QAS_REQ; 5335 5336 ahd_validate_width(ahd, tinfo, &bus_width, 5337 devinfo->role); 5338 ahd_devlimited_syncrate(ahd, tinfo, &period, 5339 &ppr_options, devinfo->role); 5340 ahd_validate_offset(ahd, tinfo, period, &offset, 5341 bus_width, devinfo->role); 5342 5343 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, TRUE)) { 5344 /* 5345 * If we are unable to do any of the 5346 * requested options (we went too low), 5347 * then we'll have to reject the message. 5348 */ 5349 if (saved_width > bus_width 5350 || saved_offset != offset 5351 || saved_ppr_options != ppr_options) { 5352 reject = TRUE; 5353 period = 0; 5354 offset = 0; 5355 bus_width = 0; 5356 ppr_options = 0; 5357 } 5358 } else { 5359 if (devinfo->role != ROLE_TARGET) 5360 printk("(%s:%c:%d:%d): Target " 5361 "Initiated PPR\n", 5362 ahd_name(ahd), devinfo->channel, 5363 devinfo->target, devinfo->lun); 5364 else 5365 printk("(%s:%c:%d:%d): Initiator " 5366 "Initiated PPR\n", 5367 ahd_name(ahd), devinfo->channel, 5368 devinfo->target, devinfo->lun); 5369 ahd->msgout_index = 0; 5370 ahd->msgout_len = 0; 5371 ahd_construct_ppr(ahd, devinfo, period, offset, 5372 bus_width, ppr_options); 5373 ahd->msgout_index = 0; 5374 response = TRUE; 5375 } 5376 if (bootverbose) { 5377 printk("(%s:%c:%d:%d): Received PPR width %x, " 5378 "period %x, offset %x,options %x\n" 5379 "\tFiltered to width %x, period %x, " 5380 "offset %x, options %x\n", 5381 ahd_name(ahd), devinfo->channel, 5382 devinfo->target, devinfo->lun, 5383 saved_width, ahd->msgin_buf[3], 5384 saved_offset, saved_ppr_options, 5385 bus_width, period, offset, ppr_options); 5386 } 5387 ahd_set_width(ahd, devinfo, bus_width, 5388 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 5389 /*paused*/TRUE); 5390 ahd_set_syncrate(ahd, devinfo, period, 5391 offset, ppr_options, 5392 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 5393 /*paused*/TRUE); 5394 5395 done = MSGLOOP_MSGCOMPLETE; 5396 break; 5397 } 5398 default: 5399 /* Unknown extended message. Reject it. */ 5400 reject = TRUE; 5401 break; 5402 } 5403 break; 5404 } 5405 #ifdef AHD_TARGET_MODE 5406 case MSG_BUS_DEV_RESET: 5407 ahd_handle_devreset(ahd, devinfo, CAM_LUN_WILDCARD, 5408 CAM_BDR_SENT, 5409 "Bus Device Reset Received", 5410 /*verbose_level*/0); 5411 ahd_restart(ahd); 5412 done = MSGLOOP_TERMINATED; 5413 break; 5414 case MSG_ABORT_TAG: 5415 case MSG_ABORT: 5416 case MSG_CLEAR_QUEUE: 5417 { 5418 int tag; 5419 5420 /* Target mode messages */ 5421 if (devinfo->role != ROLE_TARGET) { 5422 reject = TRUE; 5423 break; 5424 } 5425 tag = SCB_LIST_NULL; 5426 if (ahd->msgin_buf[0] == MSG_ABORT_TAG) 5427 tag = ahd_inb(ahd, INITIATOR_TAG); 5428 ahd_abort_scbs(ahd, devinfo->target, devinfo->channel, 5429 devinfo->lun, tag, ROLE_TARGET, 5430 CAM_REQ_ABORTED); 5431 5432 tstate = ahd->enabled_targets[devinfo->our_scsiid]; 5433 if (tstate != NULL) { 5434 struct ahd_tmode_lstate* lstate; 5435 5436 lstate = tstate->enabled_luns[devinfo->lun]; 5437 if (lstate != NULL) { 5438 ahd_queue_lstate_event(ahd, lstate, 5439 devinfo->our_scsiid, 5440 ahd->msgin_buf[0], 5441 /*arg*/tag); 5442 ahd_send_lstate_events(ahd, lstate); 5443 } 5444 } 5445 ahd_restart(ahd); 5446 done = MSGLOOP_TERMINATED; 5447 break; 5448 } 5449 #endif 5450 case MSG_QAS_REQUEST: 5451 #ifdef AHD_DEBUG 5452 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 5453 printk("%s: QAS request. SCSISIGI == 0x%x\n", 5454 ahd_name(ahd), ahd_inb(ahd, SCSISIGI)); 5455 #endif 5456 ahd->msg_flags |= MSG_FLAG_EXPECT_QASREJ_BUSFREE; 5457 fallthrough; 5458 case MSG_TERM_IO_PROC: 5459 default: 5460 reject = TRUE; 5461 break; 5462 } 5463 5464 if (reject) { 5465 /* 5466 * Setup to reject the message. 5467 */ 5468 ahd->msgout_index = 0; 5469 ahd->msgout_len = 1; 5470 ahd->msgout_buf[0] = MSG_MESSAGE_REJECT; 5471 done = MSGLOOP_MSGCOMPLETE; 5472 response = TRUE; 5473 } 5474 5475 if (done != MSGLOOP_IN_PROG && !response) 5476 /* Clear the outgoing message buffer */ 5477 ahd->msgout_len = 0; 5478 5479 return (done); 5480 } 5481 5482 /* 5483 * Process a message reject message. 5484 */ 5485 static int 5486 ahd_handle_msg_reject(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 5487 { 5488 /* 5489 * What we care about here is if we had an 5490 * outstanding SDTR or WDTR message for this 5491 * target. If we did, this is a signal that 5492 * the target is refusing negotiation. 5493 */ 5494 struct scb *scb; 5495 struct ahd_initiator_tinfo *tinfo; 5496 struct ahd_tmode_tstate *tstate; 5497 u_int scb_index; 5498 u_int last_msg; 5499 int response = 0; 5500 5501 scb_index = ahd_get_scbptr(ahd); 5502 scb = ahd_lookup_scb(ahd, scb_index); 5503 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, 5504 devinfo->our_scsiid, 5505 devinfo->target, &tstate); 5506 /* Might be necessary */ 5507 last_msg = ahd_inb(ahd, LAST_MSG); 5508 5509 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, /*full*/FALSE)) { 5510 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, /*full*/TRUE) 5511 && tinfo->goal.period <= AHD_SYNCRATE_PACED) { 5512 /* 5513 * Target may not like our SPI-4 PPR Options. 5514 * Attempt to negotiate 80MHz which will turn 5515 * off these options. 5516 */ 5517 if (bootverbose) { 5518 printk("(%s:%c:%d:%d): PPR Rejected. " 5519 "Trying simple U160 PPR\n", 5520 ahd_name(ahd), devinfo->channel, 5521 devinfo->target, devinfo->lun); 5522 } 5523 tinfo->goal.period = AHD_SYNCRATE_DT; 5524 tinfo->goal.ppr_options &= MSG_EXT_PPR_IU_REQ 5525 | MSG_EXT_PPR_QAS_REQ 5526 | MSG_EXT_PPR_DT_REQ; 5527 } else { 5528 /* 5529 * Target does not support the PPR message. 5530 * Attempt to negotiate SPI-2 style. 5531 */ 5532 if (bootverbose) { 5533 printk("(%s:%c:%d:%d): PPR Rejected. " 5534 "Trying WDTR/SDTR\n", 5535 ahd_name(ahd), devinfo->channel, 5536 devinfo->target, devinfo->lun); 5537 } 5538 tinfo->goal.ppr_options = 0; 5539 tinfo->curr.transport_version = 2; 5540 tinfo->goal.transport_version = 2; 5541 } 5542 ahd->msgout_index = 0; 5543 ahd->msgout_len = 0; 5544 ahd_build_transfer_msg(ahd, devinfo); 5545 ahd->msgout_index = 0; 5546 response = 1; 5547 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, /*full*/FALSE)) { 5548 5549 /* note 8bit xfers */ 5550 printk("(%s:%c:%d:%d): refuses WIDE negotiation. Using " 5551 "8bit transfers\n", ahd_name(ahd), 5552 devinfo->channel, devinfo->target, devinfo->lun); 5553 ahd_set_width(ahd, devinfo, MSG_EXT_WDTR_BUS_8_BIT, 5554 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 5555 /*paused*/TRUE); 5556 /* 5557 * No need to clear the sync rate. If the target 5558 * did not accept the command, our syncrate is 5559 * unaffected. If the target started the negotiation, 5560 * but rejected our response, we already cleared the 5561 * sync rate before sending our WDTR. 5562 */ 5563 if (tinfo->goal.offset != tinfo->curr.offset) { 5564 5565 /* Start the sync negotiation */ 5566 ahd->msgout_index = 0; 5567 ahd->msgout_len = 0; 5568 ahd_build_transfer_msg(ahd, devinfo); 5569 ahd->msgout_index = 0; 5570 response = 1; 5571 } 5572 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, /*full*/FALSE)) { 5573 /* note asynch xfers and clear flag */ 5574 ahd_set_syncrate(ahd, devinfo, /*period*/0, 5575 /*offset*/0, /*ppr_options*/0, 5576 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 5577 /*paused*/TRUE); 5578 printk("(%s:%c:%d:%d): refuses synchronous negotiation. " 5579 "Using asynchronous transfers\n", 5580 ahd_name(ahd), devinfo->channel, 5581 devinfo->target, devinfo->lun); 5582 } else if ((scb->hscb->control & MSG_SIMPLE_TASK) != 0) { 5583 int tag_type; 5584 int mask; 5585 5586 tag_type = (scb->hscb->control & MSG_SIMPLE_TASK); 5587 5588 if (tag_type == MSG_SIMPLE_TASK) { 5589 printk("(%s:%c:%d:%d): refuses tagged commands. " 5590 "Performing non-tagged I/O\n", ahd_name(ahd), 5591 devinfo->channel, devinfo->target, devinfo->lun); 5592 ahd_set_tags(ahd, scb->io_ctx, devinfo, AHD_QUEUE_NONE); 5593 mask = ~0x23; 5594 } else { 5595 printk("(%s:%c:%d:%d): refuses %s tagged commands. " 5596 "Performing simple queue tagged I/O only\n", 5597 ahd_name(ahd), devinfo->channel, devinfo->target, 5598 devinfo->lun, tag_type == MSG_ORDERED_TASK 5599 ? "ordered" : "head of queue"); 5600 ahd_set_tags(ahd, scb->io_ctx, devinfo, AHD_QUEUE_BASIC); 5601 mask = ~0x03; 5602 } 5603 5604 /* 5605 * Resend the identify for this CCB as the target 5606 * may believe that the selection is invalid otherwise. 5607 */ 5608 ahd_outb(ahd, SCB_CONTROL, 5609 ahd_inb_scbram(ahd, SCB_CONTROL) & mask); 5610 scb->hscb->control &= mask; 5611 ahd_set_transaction_tag(scb, /*enabled*/FALSE, 5612 /*type*/MSG_SIMPLE_TASK); 5613 ahd_outb(ahd, MSG_OUT, MSG_IDENTIFYFLAG); 5614 ahd_assert_atn(ahd); 5615 ahd_busy_tcl(ahd, BUILD_TCL(scb->hscb->scsiid, devinfo->lun), 5616 SCB_GET_TAG(scb)); 5617 5618 /* 5619 * Requeue all tagged commands for this target 5620 * currently in our possession so they can be 5621 * converted to untagged commands. 5622 */ 5623 ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb), 5624 SCB_GET_CHANNEL(ahd, scb), 5625 SCB_GET_LUN(scb), /*tag*/SCB_LIST_NULL, 5626 ROLE_INITIATOR, CAM_REQUEUE_REQ, 5627 SEARCH_COMPLETE); 5628 } else if (ahd_sent_msg(ahd, AHDMSG_1B, MSG_IDENTIFYFLAG, TRUE)) { 5629 /* 5630 * Most likely the device believes that we had 5631 * previously negotiated packetized. 5632 */ 5633 ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE 5634 | MSG_FLAG_IU_REQ_CHANGED; 5635 5636 ahd_force_renegotiation(ahd, devinfo); 5637 ahd->msgout_index = 0; 5638 ahd->msgout_len = 0; 5639 ahd_build_transfer_msg(ahd, devinfo); 5640 ahd->msgout_index = 0; 5641 response = 1; 5642 } else { 5643 /* 5644 * Otherwise, we ignore it. 5645 */ 5646 printk("%s:%c:%d: Message reject for %x -- ignored\n", 5647 ahd_name(ahd), devinfo->channel, devinfo->target, 5648 last_msg); 5649 } 5650 return (response); 5651 } 5652 5653 /* 5654 * Process an ingnore wide residue message. 5655 */ 5656 static void 5657 ahd_handle_ign_wide_residue(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 5658 { 5659 u_int scb_index; 5660 struct scb *scb; 5661 5662 scb_index = ahd_get_scbptr(ahd); 5663 scb = ahd_lookup_scb(ahd, scb_index); 5664 /* 5665 * XXX Actually check data direction in the sequencer? 5666 * Perhaps add datadir to some spare bits in the hscb? 5667 */ 5668 if ((ahd_inb(ahd, SEQ_FLAGS) & DPHASE) == 0 5669 || ahd_get_transfer_dir(scb) != CAM_DIR_IN) { 5670 /* 5671 * Ignore the message if we haven't 5672 * seen an appropriate data phase yet. 5673 */ 5674 } else { 5675 /* 5676 * If the residual occurred on the last 5677 * transfer and the transfer request was 5678 * expected to end on an odd count, do 5679 * nothing. Otherwise, subtract a byte 5680 * and update the residual count accordingly. 5681 */ 5682 uint32_t sgptr; 5683 5684 sgptr = ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR); 5685 if ((sgptr & SG_LIST_NULL) != 0 5686 && (ahd_inb_scbram(ahd, SCB_TASK_ATTRIBUTE) 5687 & SCB_XFERLEN_ODD) != 0) { 5688 /* 5689 * If the residual occurred on the last 5690 * transfer and the transfer request was 5691 * expected to end on an odd count, do 5692 * nothing. 5693 */ 5694 } else { 5695 uint32_t data_cnt; 5696 uint64_t data_addr; 5697 uint32_t sglen; 5698 5699 /* Pull in the rest of the sgptr */ 5700 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR); 5701 data_cnt = ahd_inl_scbram(ahd, SCB_RESIDUAL_DATACNT); 5702 if ((sgptr & SG_LIST_NULL) != 0) { 5703 /* 5704 * The residual data count is not updated 5705 * for the command run to completion case. 5706 * Explicitly zero the count. 5707 */ 5708 data_cnt &= ~AHD_SG_LEN_MASK; 5709 } 5710 data_addr = ahd_inq(ahd, SHADDR); 5711 data_cnt += 1; 5712 data_addr -= 1; 5713 sgptr &= SG_PTR_MASK; 5714 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) { 5715 struct ahd_dma64_seg *sg; 5716 5717 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 5718 5719 /* 5720 * The residual sg ptr points to the next S/G 5721 * to load so we must go back one. 5722 */ 5723 sg--; 5724 sglen = ahd_le32toh(sg->len) & AHD_SG_LEN_MASK; 5725 if (sg != scb->sg_list 5726 && sglen < (data_cnt & AHD_SG_LEN_MASK)) { 5727 5728 sg--; 5729 sglen = ahd_le32toh(sg->len); 5730 /* 5731 * Preserve High Address and SG_LIST 5732 * bits while setting the count to 1. 5733 */ 5734 data_cnt = 1|(sglen&(~AHD_SG_LEN_MASK)); 5735 data_addr = ahd_le64toh(sg->addr) 5736 + (sglen & AHD_SG_LEN_MASK) 5737 - 1; 5738 5739 /* 5740 * Increment sg so it points to the 5741 * "next" sg. 5742 */ 5743 sg++; 5744 sgptr = ahd_sg_virt_to_bus(ahd, scb, 5745 sg); 5746 } 5747 } else { 5748 struct ahd_dma_seg *sg; 5749 5750 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 5751 5752 /* 5753 * The residual sg ptr points to the next S/G 5754 * to load so we must go back one. 5755 */ 5756 sg--; 5757 sglen = ahd_le32toh(sg->len) & AHD_SG_LEN_MASK; 5758 if (sg != scb->sg_list 5759 && sglen < (data_cnt & AHD_SG_LEN_MASK)) { 5760 5761 sg--; 5762 sglen = ahd_le32toh(sg->len); 5763 /* 5764 * Preserve High Address and SG_LIST 5765 * bits while setting the count to 1. 5766 */ 5767 data_cnt = 1|(sglen&(~AHD_SG_LEN_MASK)); 5768 data_addr = ahd_le32toh(sg->addr) 5769 + (sglen & AHD_SG_LEN_MASK) 5770 - 1; 5771 5772 /* 5773 * Increment sg so it points to the 5774 * "next" sg. 5775 */ 5776 sg++; 5777 sgptr = ahd_sg_virt_to_bus(ahd, scb, 5778 sg); 5779 } 5780 } 5781 /* 5782 * Toggle the "oddness" of the transfer length 5783 * to handle this mid-transfer ignore wide 5784 * residue. This ensures that the oddness is 5785 * correct for subsequent data transfers. 5786 */ 5787 ahd_outb(ahd, SCB_TASK_ATTRIBUTE, 5788 ahd_inb_scbram(ahd, SCB_TASK_ATTRIBUTE) 5789 ^ SCB_XFERLEN_ODD); 5790 5791 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr); 5792 ahd_outl(ahd, SCB_RESIDUAL_DATACNT, data_cnt); 5793 /* 5794 * The FIFO's pointers will be updated if/when the 5795 * sequencer re-enters a data phase. 5796 */ 5797 } 5798 } 5799 } 5800 5801 5802 /* 5803 * Reinitialize the data pointers for the active transfer 5804 * based on its current residual. 5805 */ 5806 static void 5807 ahd_reinitialize_dataptrs(struct ahd_softc *ahd) 5808 { 5809 struct scb *scb; 5810 ahd_mode_state saved_modes; 5811 u_int scb_index; 5812 u_int wait; 5813 uint32_t sgptr; 5814 uint32_t resid; 5815 uint64_t dataptr; 5816 5817 AHD_ASSERT_MODES(ahd, AHD_MODE_DFF0_MSK|AHD_MODE_DFF1_MSK, 5818 AHD_MODE_DFF0_MSK|AHD_MODE_DFF1_MSK); 5819 5820 scb_index = ahd_get_scbptr(ahd); 5821 scb = ahd_lookup_scb(ahd, scb_index); 5822 5823 /* 5824 * Release and reacquire the FIFO so we 5825 * have a clean slate. 5826 */ 5827 ahd_outb(ahd, DFFSXFRCTL, CLRCHN); 5828 wait = 1000; 5829 while (--wait && !(ahd_inb(ahd, MDFFSTAT) & FIFOFREE)) 5830 ahd_delay(100); 5831 if (wait == 0) { 5832 ahd_print_path(ahd, scb); 5833 printk("ahd_reinitialize_dataptrs: Forcing FIFO free.\n"); 5834 ahd_outb(ahd, DFFSXFRCTL, RSTCHN|CLRSHCNT); 5835 } 5836 saved_modes = ahd_save_modes(ahd); 5837 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 5838 ahd_outb(ahd, DFFSTAT, 5839 ahd_inb(ahd, DFFSTAT) 5840 | (saved_modes == 0x11 ? CURRFIFO_1 : CURRFIFO_0)); 5841 5842 /* 5843 * Determine initial values for data_addr and data_cnt 5844 * for resuming the data phase. 5845 */ 5846 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR); 5847 sgptr &= SG_PTR_MASK; 5848 5849 resid = (ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT + 2) << 16) 5850 | (ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT + 1) << 8) 5851 | ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT); 5852 5853 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) { 5854 struct ahd_dma64_seg *sg; 5855 5856 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 5857 5858 /* The residual sg_ptr always points to the next sg */ 5859 sg--; 5860 5861 dataptr = ahd_le64toh(sg->addr) 5862 + (ahd_le32toh(sg->len) & AHD_SG_LEN_MASK) 5863 - resid; 5864 ahd_outl(ahd, HADDR + 4, dataptr >> 32); 5865 } else { 5866 struct ahd_dma_seg *sg; 5867 5868 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 5869 5870 /* The residual sg_ptr always points to the next sg */ 5871 sg--; 5872 5873 dataptr = ahd_le32toh(sg->addr) 5874 + (ahd_le32toh(sg->len) & AHD_SG_LEN_MASK) 5875 - resid; 5876 ahd_outb(ahd, HADDR + 4, 5877 (ahd_le32toh(sg->len) & ~AHD_SG_LEN_MASK) >> 24); 5878 } 5879 ahd_outl(ahd, HADDR, dataptr); 5880 ahd_outb(ahd, HCNT + 2, resid >> 16); 5881 ahd_outb(ahd, HCNT + 1, resid >> 8); 5882 ahd_outb(ahd, HCNT, resid); 5883 } 5884 5885 /* 5886 * Handle the effects of issuing a bus device reset message. 5887 */ 5888 static void 5889 ahd_handle_devreset(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 5890 u_int lun, cam_status status, char *message, 5891 int verbose_level) 5892 { 5893 #ifdef AHD_TARGET_MODE 5894 struct ahd_tmode_tstate* tstate; 5895 #endif 5896 int found; 5897 5898 found = ahd_abort_scbs(ahd, devinfo->target, devinfo->channel, 5899 lun, SCB_LIST_NULL, devinfo->role, 5900 status); 5901 5902 #ifdef AHD_TARGET_MODE 5903 /* 5904 * Send an immediate notify ccb to all target mord peripheral 5905 * drivers affected by this action. 5906 */ 5907 tstate = ahd->enabled_targets[devinfo->our_scsiid]; 5908 if (tstate != NULL) { 5909 u_int cur_lun; 5910 u_int max_lun; 5911 5912 if (lun != CAM_LUN_WILDCARD) { 5913 cur_lun = 0; 5914 max_lun = AHD_NUM_LUNS - 1; 5915 } else { 5916 cur_lun = lun; 5917 max_lun = lun; 5918 } 5919 for (;cur_lun <= max_lun; cur_lun++) { 5920 struct ahd_tmode_lstate* lstate; 5921 5922 lstate = tstate->enabled_luns[cur_lun]; 5923 if (lstate == NULL) 5924 continue; 5925 5926 ahd_queue_lstate_event(ahd, lstate, devinfo->our_scsiid, 5927 MSG_BUS_DEV_RESET, /*arg*/0); 5928 ahd_send_lstate_events(ahd, lstate); 5929 } 5930 } 5931 #endif 5932 5933 /* 5934 * Go back to async/narrow transfers and renegotiate. 5935 */ 5936 ahd_set_width(ahd, devinfo, MSG_EXT_WDTR_BUS_8_BIT, 5937 AHD_TRANS_CUR, /*paused*/TRUE); 5938 ahd_set_syncrate(ahd, devinfo, /*period*/0, /*offset*/0, 5939 /*ppr_options*/0, AHD_TRANS_CUR, 5940 /*paused*/TRUE); 5941 5942 if (status != CAM_SEL_TIMEOUT) 5943 ahd_send_async(ahd, devinfo->channel, devinfo->target, 5944 CAM_LUN_WILDCARD, AC_SENT_BDR); 5945 5946 if (message != NULL && bootverbose) 5947 printk("%s: %s on %c:%d. %d SCBs aborted\n", ahd_name(ahd), 5948 message, devinfo->channel, devinfo->target, found); 5949 } 5950 5951 #ifdef AHD_TARGET_MODE 5952 static void 5953 ahd_setup_target_msgin(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 5954 struct scb *scb) 5955 { 5956 5957 /* 5958 * To facilitate adding multiple messages together, 5959 * each routine should increment the index and len 5960 * variables instead of setting them explicitly. 5961 */ 5962 ahd->msgout_index = 0; 5963 ahd->msgout_len = 0; 5964 5965 if (scb != NULL && (scb->flags & SCB_AUTO_NEGOTIATE) != 0) 5966 ahd_build_transfer_msg(ahd, devinfo); 5967 else 5968 panic("ahd_intr: AWAITING target message with no message"); 5969 5970 ahd->msgout_index = 0; 5971 ahd->msg_type = MSG_TYPE_TARGET_MSGIN; 5972 } 5973 #endif 5974 /**************************** Initialization **********************************/ 5975 static u_int 5976 ahd_sglist_size(struct ahd_softc *ahd) 5977 { 5978 bus_size_t list_size; 5979 5980 list_size = sizeof(struct ahd_dma_seg) * AHD_NSEG; 5981 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) 5982 list_size = sizeof(struct ahd_dma64_seg) * AHD_NSEG; 5983 return (list_size); 5984 } 5985 5986 /* 5987 * Calculate the optimum S/G List allocation size. S/G elements used 5988 * for a given transaction must be physically contiguous. Assume the 5989 * OS will allocate full pages to us, so it doesn't make sense to request 5990 * less than a page. 5991 */ 5992 static u_int 5993 ahd_sglist_allocsize(struct ahd_softc *ahd) 5994 { 5995 bus_size_t sg_list_increment; 5996 bus_size_t sg_list_size; 5997 bus_size_t max_list_size; 5998 bus_size_t best_list_size; 5999 6000 /* Start out with the minimum required for AHD_NSEG. */ 6001 sg_list_increment = ahd_sglist_size(ahd); 6002 sg_list_size = sg_list_increment; 6003 6004 /* Get us as close as possible to a page in size. */ 6005 while ((sg_list_size + sg_list_increment) <= PAGE_SIZE) 6006 sg_list_size += sg_list_increment; 6007 6008 /* 6009 * Try to reduce the amount of wastage by allocating 6010 * multiple pages. 6011 */ 6012 best_list_size = sg_list_size; 6013 max_list_size = roundup(sg_list_increment, PAGE_SIZE); 6014 if (max_list_size < 4 * PAGE_SIZE) 6015 max_list_size = 4 * PAGE_SIZE; 6016 if (max_list_size > (AHD_SCB_MAX_ALLOC * sg_list_increment)) 6017 max_list_size = (AHD_SCB_MAX_ALLOC * sg_list_increment); 6018 while ((sg_list_size + sg_list_increment) <= max_list_size 6019 && (sg_list_size % PAGE_SIZE) != 0) { 6020 bus_size_t new_mod; 6021 bus_size_t best_mod; 6022 6023 sg_list_size += sg_list_increment; 6024 new_mod = sg_list_size % PAGE_SIZE; 6025 best_mod = best_list_size % PAGE_SIZE; 6026 if (new_mod > best_mod || new_mod == 0) { 6027 best_list_size = sg_list_size; 6028 } 6029 } 6030 return (best_list_size); 6031 } 6032 6033 /* 6034 * Allocate a controller structure for a new device 6035 * and perform initial initializion. 6036 */ 6037 struct ahd_softc * 6038 ahd_alloc(void *platform_arg, char *name) 6039 { 6040 struct ahd_softc *ahd; 6041 6042 ahd = kzalloc(sizeof(*ahd), GFP_ATOMIC); 6043 if (!ahd) { 6044 printk("aic7xxx: cannot malloc softc!\n"); 6045 kfree(name); 6046 return NULL; 6047 } 6048 6049 ahd->seep_config = kmalloc(sizeof(*ahd->seep_config), GFP_ATOMIC); 6050 if (ahd->seep_config == NULL) { 6051 kfree(ahd); 6052 kfree(name); 6053 return (NULL); 6054 } 6055 LIST_INIT(&ahd->pending_scbs); 6056 /* We don't know our unit number until the OSM sets it */ 6057 ahd->name = name; 6058 ahd->unit = -1; 6059 ahd->description = NULL; 6060 ahd->bus_description = NULL; 6061 ahd->channel = 'A'; 6062 ahd->chip = AHD_NONE; 6063 ahd->features = AHD_FENONE; 6064 ahd->bugs = AHD_BUGNONE; 6065 ahd->flags = AHD_SPCHK_ENB_A|AHD_RESET_BUS_A|AHD_TERM_ENB_A 6066 | AHD_EXTENDED_TRANS_A|AHD_STPWLEVEL_A; 6067 timer_setup(&ahd->stat_timer, ahd_stat_timer, 0); 6068 ahd->int_coalescing_timer = AHD_INT_COALESCING_TIMER_DEFAULT; 6069 ahd->int_coalescing_maxcmds = AHD_INT_COALESCING_MAXCMDS_DEFAULT; 6070 ahd->int_coalescing_mincmds = AHD_INT_COALESCING_MINCMDS_DEFAULT; 6071 ahd->int_coalescing_threshold = AHD_INT_COALESCING_THRESHOLD_DEFAULT; 6072 ahd->int_coalescing_stop_threshold = 6073 AHD_INT_COALESCING_STOP_THRESHOLD_DEFAULT; 6074 6075 #ifdef AHD_DEBUG 6076 if ((ahd_debug & AHD_SHOW_MEMORY) != 0) { 6077 printk("%s: scb size = 0x%x, hscb size = 0x%x\n", 6078 ahd_name(ahd), (u_int)sizeof(struct scb), 6079 (u_int)sizeof(struct hardware_scb)); 6080 } 6081 #endif 6082 if (ahd_platform_alloc(ahd, platform_arg) != 0) { 6083 ahd_free(ahd); 6084 ahd = NULL; 6085 } 6086 return (ahd); 6087 } 6088 6089 int 6090 ahd_softc_init(struct ahd_softc *ahd) 6091 { 6092 6093 ahd->unpause = 0; 6094 ahd->pause = PAUSE; 6095 return (0); 6096 } 6097 6098 void 6099 ahd_set_unit(struct ahd_softc *ahd, int unit) 6100 { 6101 ahd->unit = unit; 6102 } 6103 6104 void 6105 ahd_set_name(struct ahd_softc *ahd, char *name) 6106 { 6107 kfree(ahd->name); 6108 ahd->name = name; 6109 } 6110 6111 void 6112 ahd_free(struct ahd_softc *ahd) 6113 { 6114 int i; 6115 6116 switch (ahd->init_level) { 6117 default: 6118 case 5: 6119 ahd_shutdown(ahd); 6120 fallthrough; 6121 case 4: 6122 ahd_dmamap_unload(ahd, ahd->shared_data_dmat, 6123 ahd->shared_data_map.dmamap); 6124 fallthrough; 6125 case 3: 6126 ahd_dmamem_free(ahd, ahd->shared_data_dmat, ahd->qoutfifo, 6127 ahd->shared_data_map.dmamap); 6128 ahd_dmamap_destroy(ahd, ahd->shared_data_dmat, 6129 ahd->shared_data_map.dmamap); 6130 fallthrough; 6131 case 2: 6132 ahd_dma_tag_destroy(ahd, ahd->shared_data_dmat); 6133 case 1: 6134 break; 6135 case 0: 6136 break; 6137 } 6138 6139 ahd_platform_free(ahd); 6140 ahd_fini_scbdata(ahd); 6141 for (i = 0; i < AHD_NUM_TARGETS; i++) { 6142 struct ahd_tmode_tstate *tstate; 6143 6144 tstate = ahd->enabled_targets[i]; 6145 if (tstate != NULL) { 6146 #ifdef AHD_TARGET_MODE 6147 int j; 6148 6149 for (j = 0; j < AHD_NUM_LUNS; j++) { 6150 struct ahd_tmode_lstate *lstate; 6151 6152 lstate = tstate->enabled_luns[j]; 6153 if (lstate != NULL) { 6154 xpt_free_path(lstate->path); 6155 kfree(lstate); 6156 } 6157 } 6158 #endif 6159 kfree(tstate); 6160 } 6161 } 6162 #ifdef AHD_TARGET_MODE 6163 if (ahd->black_hole != NULL) { 6164 xpt_free_path(ahd->black_hole->path); 6165 kfree(ahd->black_hole); 6166 } 6167 #endif 6168 kfree(ahd->name); 6169 kfree(ahd->seep_config); 6170 kfree(ahd->saved_stack); 6171 kfree(ahd); 6172 return; 6173 } 6174 6175 static void 6176 ahd_shutdown(void *arg) 6177 { 6178 struct ahd_softc *ahd; 6179 6180 ahd = (struct ahd_softc *)arg; 6181 6182 /* 6183 * Stop periodic timer callbacks. 6184 */ 6185 del_timer_sync(&ahd->stat_timer); 6186 6187 /* This will reset most registers to 0, but not all */ 6188 ahd_reset(ahd, /*reinit*/FALSE); 6189 } 6190 6191 /* 6192 * Reset the controller and record some information about it 6193 * that is only available just after a reset. If "reinit" is 6194 * non-zero, this reset occurred after initial configuration 6195 * and the caller requests that the chip be fully reinitialized 6196 * to a runable state. Chip interrupts are *not* enabled after 6197 * a reinitialization. The caller must enable interrupts via 6198 * ahd_intr_enable(). 6199 */ 6200 int 6201 ahd_reset(struct ahd_softc *ahd, int reinit) 6202 { 6203 u_int sxfrctl1; 6204 int wait; 6205 uint32_t cmd; 6206 6207 /* 6208 * Preserve the value of the SXFRCTL1 register for all channels. 6209 * It contains settings that affect termination and we don't want 6210 * to disturb the integrity of the bus. 6211 */ 6212 ahd_pause(ahd); 6213 ahd_update_modes(ahd); 6214 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 6215 sxfrctl1 = ahd_inb(ahd, SXFRCTL1); 6216 6217 cmd = ahd_pci_read_config(ahd->dev_softc, PCIR_COMMAND, /*bytes*/2); 6218 if ((ahd->bugs & AHD_PCIX_CHIPRST_BUG) != 0) { 6219 uint32_t mod_cmd; 6220 6221 /* 6222 * A4 Razor #632 6223 * During the assertion of CHIPRST, the chip 6224 * does not disable its parity logic prior to 6225 * the start of the reset. This may cause a 6226 * parity error to be detected and thus a 6227 * spurious SERR or PERR assertion. Disable 6228 * PERR and SERR responses during the CHIPRST. 6229 */ 6230 mod_cmd = cmd & ~(PCIM_CMD_PERRESPEN|PCIM_CMD_SERRESPEN); 6231 ahd_pci_write_config(ahd->dev_softc, PCIR_COMMAND, 6232 mod_cmd, /*bytes*/2); 6233 } 6234 ahd_outb(ahd, HCNTRL, CHIPRST | ahd->pause); 6235 6236 /* 6237 * Ensure that the reset has finished. We delay 1000us 6238 * prior to reading the register to make sure the chip 6239 * has sufficiently completed its reset to handle register 6240 * accesses. 6241 */ 6242 wait = 1000; 6243 do { 6244 ahd_delay(1000); 6245 } while (--wait && !(ahd_inb(ahd, HCNTRL) & CHIPRSTACK)); 6246 6247 if (wait == 0) { 6248 printk("%s: WARNING - Failed chip reset! " 6249 "Trying to initialize anyway.\n", ahd_name(ahd)); 6250 } 6251 ahd_outb(ahd, HCNTRL, ahd->pause); 6252 6253 if ((ahd->bugs & AHD_PCIX_CHIPRST_BUG) != 0) { 6254 /* 6255 * Clear any latched PCI error status and restore 6256 * previous SERR and PERR response enables. 6257 */ 6258 ahd_pci_write_config(ahd->dev_softc, PCIR_STATUS + 1, 6259 0xFF, /*bytes*/1); 6260 ahd_pci_write_config(ahd->dev_softc, PCIR_COMMAND, 6261 cmd, /*bytes*/2); 6262 } 6263 6264 /* 6265 * Mode should be SCSI after a chip reset, but lets 6266 * set it just to be safe. We touch the MODE_PTR 6267 * register directly so as to bypass the lazy update 6268 * code in ahd_set_modes(). 6269 */ 6270 ahd_known_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 6271 ahd_outb(ahd, MODE_PTR, 6272 ahd_build_mode_state(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI)); 6273 6274 /* 6275 * Restore SXFRCTL1. 6276 * 6277 * We must always initialize STPWEN to 1 before we 6278 * restore the saved values. STPWEN is initialized 6279 * to a tri-state condition which can only be cleared 6280 * by turning it on. 6281 */ 6282 ahd_outb(ahd, SXFRCTL1, sxfrctl1|STPWEN); 6283 ahd_outb(ahd, SXFRCTL1, sxfrctl1); 6284 6285 /* Determine chip configuration */ 6286 ahd->features &= ~AHD_WIDE; 6287 if ((ahd_inb(ahd, SBLKCTL) & SELWIDE) != 0) 6288 ahd->features |= AHD_WIDE; 6289 6290 /* 6291 * If a recovery action has forced a chip reset, 6292 * re-initialize the chip to our liking. 6293 */ 6294 if (reinit != 0) 6295 ahd_chip_init(ahd); 6296 6297 return (0); 6298 } 6299 6300 /* 6301 * Determine the number of SCBs available on the controller 6302 */ 6303 static int 6304 ahd_probe_scbs(struct ahd_softc *ahd) { 6305 int i; 6306 6307 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK), 6308 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK)); 6309 for (i = 0; i < AHD_SCB_MAX; i++) { 6310 int j; 6311 6312 ahd_set_scbptr(ahd, i); 6313 ahd_outw(ahd, SCB_BASE, i); 6314 for (j = 2; j < 64; j++) 6315 ahd_outb(ahd, SCB_BASE+j, 0); 6316 /* Start out life as unallocated (needing an abort) */ 6317 ahd_outb(ahd, SCB_CONTROL, MK_MESSAGE); 6318 if (ahd_inw_scbram(ahd, SCB_BASE) != i) 6319 break; 6320 ahd_set_scbptr(ahd, 0); 6321 if (ahd_inw_scbram(ahd, SCB_BASE) != 0) 6322 break; 6323 } 6324 return (i); 6325 } 6326 6327 static void 6328 ahd_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error) 6329 { 6330 dma_addr_t *baddr; 6331 6332 baddr = (dma_addr_t *)arg; 6333 *baddr = segs->ds_addr; 6334 } 6335 6336 static void 6337 ahd_initialize_hscbs(struct ahd_softc *ahd) 6338 { 6339 int i; 6340 6341 for (i = 0; i < ahd->scb_data.maxhscbs; i++) { 6342 ahd_set_scbptr(ahd, i); 6343 6344 /* Clear the control byte. */ 6345 ahd_outb(ahd, SCB_CONTROL, 0); 6346 6347 /* Set the next pointer */ 6348 ahd_outw(ahd, SCB_NEXT, SCB_LIST_NULL); 6349 } 6350 } 6351 6352 static int 6353 ahd_init_scbdata(struct ahd_softc *ahd) 6354 { 6355 struct scb_data *scb_data; 6356 int i; 6357 6358 scb_data = &ahd->scb_data; 6359 TAILQ_INIT(&scb_data->free_scbs); 6360 for (i = 0; i < AHD_NUM_TARGETS * AHD_NUM_LUNS_NONPKT; i++) 6361 LIST_INIT(&scb_data->free_scb_lists[i]); 6362 LIST_INIT(&scb_data->any_dev_free_scb_list); 6363 SLIST_INIT(&scb_data->hscb_maps); 6364 SLIST_INIT(&scb_data->sg_maps); 6365 SLIST_INIT(&scb_data->sense_maps); 6366 6367 /* Determine the number of hardware SCBs and initialize them */ 6368 scb_data->maxhscbs = ahd_probe_scbs(ahd); 6369 if (scb_data->maxhscbs == 0) { 6370 printk("%s: No SCB space found\n", ahd_name(ahd)); 6371 return (ENXIO); 6372 } 6373 6374 ahd_initialize_hscbs(ahd); 6375 6376 /* 6377 * Create our DMA tags. These tags define the kinds of device 6378 * accessible memory allocations and memory mappings we will 6379 * need to perform during normal operation. 6380 * 6381 * Unless we need to further restrict the allocation, we rely 6382 * on the restrictions of the parent dmat, hence the common 6383 * use of MAXADDR and MAXSIZE. 6384 */ 6385 6386 /* DMA tag for our hardware scb structures */ 6387 if (ahd_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/1, 6388 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1, 6389 /*lowaddr*/BUS_SPACE_MAXADDR_32BIT, 6390 /*highaddr*/BUS_SPACE_MAXADDR, 6391 /*filter*/NULL, /*filterarg*/NULL, 6392 PAGE_SIZE, /*nsegments*/1, 6393 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT, 6394 /*flags*/0, &scb_data->hscb_dmat) != 0) { 6395 goto error_exit; 6396 } 6397 6398 scb_data->init_level++; 6399 6400 /* DMA tag for our S/G structures. */ 6401 if (ahd_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/8, 6402 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1, 6403 /*lowaddr*/BUS_SPACE_MAXADDR_32BIT, 6404 /*highaddr*/BUS_SPACE_MAXADDR, 6405 /*filter*/NULL, /*filterarg*/NULL, 6406 ahd_sglist_allocsize(ahd), /*nsegments*/1, 6407 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT, 6408 /*flags*/0, &scb_data->sg_dmat) != 0) { 6409 goto error_exit; 6410 } 6411 #ifdef AHD_DEBUG 6412 if ((ahd_debug & AHD_SHOW_MEMORY) != 0) 6413 printk("%s: ahd_sglist_allocsize = 0x%x\n", ahd_name(ahd), 6414 ahd_sglist_allocsize(ahd)); 6415 #endif 6416 6417 scb_data->init_level++; 6418 6419 /* DMA tag for our sense buffers. We allocate in page sized chunks */ 6420 if (ahd_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/1, 6421 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1, 6422 /*lowaddr*/BUS_SPACE_MAXADDR_32BIT, 6423 /*highaddr*/BUS_SPACE_MAXADDR, 6424 /*filter*/NULL, /*filterarg*/NULL, 6425 PAGE_SIZE, /*nsegments*/1, 6426 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT, 6427 /*flags*/0, &scb_data->sense_dmat) != 0) { 6428 goto error_exit; 6429 } 6430 6431 scb_data->init_level++; 6432 6433 /* Perform initial CCB allocation */ 6434 ahd_alloc_scbs(ahd); 6435 6436 if (scb_data->numscbs == 0) { 6437 printk("%s: ahd_init_scbdata - " 6438 "Unable to allocate initial scbs\n", 6439 ahd_name(ahd)); 6440 goto error_exit; 6441 } 6442 6443 /* 6444 * Note that we were successful 6445 */ 6446 return (0); 6447 6448 error_exit: 6449 6450 return (ENOMEM); 6451 } 6452 6453 static struct scb * 6454 ahd_find_scb_by_tag(struct ahd_softc *ahd, u_int tag) 6455 { 6456 struct scb *scb; 6457 6458 /* 6459 * Look on the pending list. 6460 */ 6461 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) { 6462 if (SCB_GET_TAG(scb) == tag) 6463 return (scb); 6464 } 6465 6466 /* 6467 * Then on all of the collision free lists. 6468 */ 6469 TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) { 6470 struct scb *list_scb; 6471 6472 list_scb = scb; 6473 do { 6474 if (SCB_GET_TAG(list_scb) == tag) 6475 return (list_scb); 6476 list_scb = LIST_NEXT(list_scb, collision_links); 6477 } while (list_scb); 6478 } 6479 6480 /* 6481 * And finally on the generic free list. 6482 */ 6483 LIST_FOREACH(scb, &ahd->scb_data.any_dev_free_scb_list, links.le) { 6484 if (SCB_GET_TAG(scb) == tag) 6485 return (scb); 6486 } 6487 6488 return (NULL); 6489 } 6490 6491 static void 6492 ahd_fini_scbdata(struct ahd_softc *ahd) 6493 { 6494 struct scb_data *scb_data; 6495 6496 scb_data = &ahd->scb_data; 6497 if (scb_data == NULL) 6498 return; 6499 6500 switch (scb_data->init_level) { 6501 default: 6502 case 7: 6503 { 6504 struct map_node *sns_map; 6505 6506 while ((sns_map = SLIST_FIRST(&scb_data->sense_maps)) != NULL) { 6507 SLIST_REMOVE_HEAD(&scb_data->sense_maps, links); 6508 ahd_dmamap_unload(ahd, scb_data->sense_dmat, 6509 sns_map->dmamap); 6510 ahd_dmamem_free(ahd, scb_data->sense_dmat, 6511 sns_map->vaddr, sns_map->dmamap); 6512 kfree(sns_map); 6513 } 6514 ahd_dma_tag_destroy(ahd, scb_data->sense_dmat); 6515 } 6516 fallthrough; 6517 case 6: 6518 { 6519 struct map_node *sg_map; 6520 6521 while ((sg_map = SLIST_FIRST(&scb_data->sg_maps)) != NULL) { 6522 SLIST_REMOVE_HEAD(&scb_data->sg_maps, links); 6523 ahd_dmamap_unload(ahd, scb_data->sg_dmat, 6524 sg_map->dmamap); 6525 ahd_dmamem_free(ahd, scb_data->sg_dmat, 6526 sg_map->vaddr, sg_map->dmamap); 6527 kfree(sg_map); 6528 } 6529 ahd_dma_tag_destroy(ahd, scb_data->sg_dmat); 6530 } 6531 fallthrough; 6532 case 5: 6533 { 6534 struct map_node *hscb_map; 6535 6536 while ((hscb_map = SLIST_FIRST(&scb_data->hscb_maps)) != NULL) { 6537 SLIST_REMOVE_HEAD(&scb_data->hscb_maps, links); 6538 ahd_dmamap_unload(ahd, scb_data->hscb_dmat, 6539 hscb_map->dmamap); 6540 ahd_dmamem_free(ahd, scb_data->hscb_dmat, 6541 hscb_map->vaddr, hscb_map->dmamap); 6542 kfree(hscb_map); 6543 } 6544 ahd_dma_tag_destroy(ahd, scb_data->hscb_dmat); 6545 /* FALLTHROUGH */ 6546 } 6547 case 4: 6548 case 3: 6549 case 2: 6550 case 1: 6551 case 0: 6552 break; 6553 } 6554 } 6555 6556 /* 6557 * DSP filter Bypass must be enabled until the first selection 6558 * after a change in bus mode (Razor #491 and #493). 6559 */ 6560 static void 6561 ahd_setup_iocell_workaround(struct ahd_softc *ahd) 6562 { 6563 ahd_mode_state saved_modes; 6564 6565 saved_modes = ahd_save_modes(ahd); 6566 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 6567 ahd_outb(ahd, DSPDATACTL, ahd_inb(ahd, DSPDATACTL) 6568 | BYPASSENAB | RCVROFFSTDIS | XMITOFFSTDIS); 6569 ahd_outb(ahd, SIMODE0, ahd_inb(ahd, SIMODE0) | (ENSELDO|ENSELDI)); 6570 #ifdef AHD_DEBUG 6571 if ((ahd_debug & AHD_SHOW_MISC) != 0) 6572 printk("%s: Setting up iocell workaround\n", ahd_name(ahd)); 6573 #endif 6574 ahd_restore_modes(ahd, saved_modes); 6575 ahd->flags &= ~AHD_HAD_FIRST_SEL; 6576 } 6577 6578 static void 6579 ahd_iocell_first_selection(struct ahd_softc *ahd) 6580 { 6581 ahd_mode_state saved_modes; 6582 u_int sblkctl; 6583 6584 if ((ahd->flags & AHD_HAD_FIRST_SEL) != 0) 6585 return; 6586 saved_modes = ahd_save_modes(ahd); 6587 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 6588 sblkctl = ahd_inb(ahd, SBLKCTL); 6589 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 6590 #ifdef AHD_DEBUG 6591 if ((ahd_debug & AHD_SHOW_MISC) != 0) 6592 printk("%s: iocell first selection\n", ahd_name(ahd)); 6593 #endif 6594 if ((sblkctl & ENAB40) != 0) { 6595 ahd_outb(ahd, DSPDATACTL, 6596 ahd_inb(ahd, DSPDATACTL) & ~BYPASSENAB); 6597 #ifdef AHD_DEBUG 6598 if ((ahd_debug & AHD_SHOW_MISC) != 0) 6599 printk("%s: BYPASS now disabled\n", ahd_name(ahd)); 6600 #endif 6601 } 6602 ahd_outb(ahd, SIMODE0, ahd_inb(ahd, SIMODE0) & ~(ENSELDO|ENSELDI)); 6603 ahd_outb(ahd, CLRINT, CLRSCSIINT); 6604 ahd_restore_modes(ahd, saved_modes); 6605 ahd->flags |= AHD_HAD_FIRST_SEL; 6606 } 6607 6608 /*************************** SCB Management ***********************************/ 6609 static void 6610 ahd_add_col_list(struct ahd_softc *ahd, struct scb *scb, u_int col_idx) 6611 { 6612 struct scb_list *free_list; 6613 struct scb_tailq *free_tailq; 6614 struct scb *first_scb; 6615 6616 scb->flags |= SCB_ON_COL_LIST; 6617 AHD_SET_SCB_COL_IDX(scb, col_idx); 6618 free_list = &ahd->scb_data.free_scb_lists[col_idx]; 6619 free_tailq = &ahd->scb_data.free_scbs; 6620 first_scb = LIST_FIRST(free_list); 6621 if (first_scb != NULL) { 6622 LIST_INSERT_AFTER(first_scb, scb, collision_links); 6623 } else { 6624 LIST_INSERT_HEAD(free_list, scb, collision_links); 6625 TAILQ_INSERT_TAIL(free_tailq, scb, links.tqe); 6626 } 6627 } 6628 6629 static void 6630 ahd_rem_col_list(struct ahd_softc *ahd, struct scb *scb) 6631 { 6632 struct scb_list *free_list; 6633 struct scb_tailq *free_tailq; 6634 struct scb *first_scb; 6635 u_int col_idx; 6636 6637 scb->flags &= ~SCB_ON_COL_LIST; 6638 col_idx = AHD_GET_SCB_COL_IDX(ahd, scb); 6639 free_list = &ahd->scb_data.free_scb_lists[col_idx]; 6640 free_tailq = &ahd->scb_data.free_scbs; 6641 first_scb = LIST_FIRST(free_list); 6642 if (first_scb == scb) { 6643 struct scb *next_scb; 6644 6645 /* 6646 * Maintain order in the collision free 6647 * lists for fairness if this device has 6648 * other colliding tags active. 6649 */ 6650 next_scb = LIST_NEXT(scb, collision_links); 6651 if (next_scb != NULL) { 6652 TAILQ_INSERT_AFTER(free_tailq, scb, 6653 next_scb, links.tqe); 6654 } 6655 TAILQ_REMOVE(free_tailq, scb, links.tqe); 6656 } 6657 LIST_REMOVE(scb, collision_links); 6658 } 6659 6660 /* 6661 * Get a free scb. If there are none, see if we can allocate a new SCB. 6662 */ 6663 struct scb * 6664 ahd_get_scb(struct ahd_softc *ahd, u_int col_idx) 6665 { 6666 struct scb *scb; 6667 int tries; 6668 6669 tries = 0; 6670 look_again: 6671 TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) { 6672 if (AHD_GET_SCB_COL_IDX(ahd, scb) != col_idx) { 6673 ahd_rem_col_list(ahd, scb); 6674 goto found; 6675 } 6676 } 6677 if ((scb = LIST_FIRST(&ahd->scb_data.any_dev_free_scb_list)) == NULL) { 6678 6679 if (tries++ != 0) 6680 return (NULL); 6681 ahd_alloc_scbs(ahd); 6682 goto look_again; 6683 } 6684 LIST_REMOVE(scb, links.le); 6685 if (col_idx != AHD_NEVER_COL_IDX 6686 && (scb->col_scb != NULL) 6687 && (scb->col_scb->flags & SCB_ACTIVE) == 0) { 6688 LIST_REMOVE(scb->col_scb, links.le); 6689 ahd_add_col_list(ahd, scb->col_scb, col_idx); 6690 } 6691 found: 6692 scb->flags |= SCB_ACTIVE; 6693 return (scb); 6694 } 6695 6696 /* 6697 * Return an SCB resource to the free list. 6698 */ 6699 void 6700 ahd_free_scb(struct ahd_softc *ahd, struct scb *scb) 6701 { 6702 /* Clean up for the next user */ 6703 scb->flags = SCB_FLAG_NONE; 6704 scb->hscb->control = 0; 6705 ahd->scb_data.scbindex[SCB_GET_TAG(scb)] = NULL; 6706 6707 if (scb->col_scb == NULL) { 6708 6709 /* 6710 * No collision possible. Just free normally. 6711 */ 6712 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list, 6713 scb, links.le); 6714 } else if ((scb->col_scb->flags & SCB_ON_COL_LIST) != 0) { 6715 6716 /* 6717 * The SCB we might have collided with is on 6718 * a free collision list. Put both SCBs on 6719 * the generic list. 6720 */ 6721 ahd_rem_col_list(ahd, scb->col_scb); 6722 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list, 6723 scb, links.le); 6724 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list, 6725 scb->col_scb, links.le); 6726 } else if ((scb->col_scb->flags 6727 & (SCB_PACKETIZED|SCB_ACTIVE)) == SCB_ACTIVE 6728 && (scb->col_scb->hscb->control & TAG_ENB) != 0) { 6729 6730 /* 6731 * The SCB we might collide with on the next allocation 6732 * is still active in a non-packetized, tagged, context. 6733 * Put us on the SCB collision list. 6734 */ 6735 ahd_add_col_list(ahd, scb, 6736 AHD_GET_SCB_COL_IDX(ahd, scb->col_scb)); 6737 } else { 6738 /* 6739 * The SCB we might collide with on the next allocation 6740 * is either active in a packetized context, or free. 6741 * Since we can't collide, put this SCB on the generic 6742 * free list. 6743 */ 6744 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list, 6745 scb, links.le); 6746 } 6747 6748 ahd_platform_scb_free(ahd, scb); 6749 } 6750 6751 static void 6752 ahd_alloc_scbs(struct ahd_softc *ahd) 6753 { 6754 struct scb_data *scb_data; 6755 struct scb *next_scb; 6756 struct hardware_scb *hscb; 6757 struct map_node *hscb_map; 6758 struct map_node *sg_map; 6759 struct map_node *sense_map; 6760 uint8_t *segs; 6761 uint8_t *sense_data; 6762 dma_addr_t hscb_busaddr; 6763 dma_addr_t sg_busaddr; 6764 dma_addr_t sense_busaddr; 6765 int newcount; 6766 int i; 6767 6768 scb_data = &ahd->scb_data; 6769 if (scb_data->numscbs >= AHD_SCB_MAX_ALLOC) 6770 /* Can't allocate any more */ 6771 return; 6772 6773 if (scb_data->scbs_left != 0) { 6774 int offset; 6775 6776 offset = (PAGE_SIZE / sizeof(*hscb)) - scb_data->scbs_left; 6777 hscb_map = SLIST_FIRST(&scb_data->hscb_maps); 6778 hscb = &((struct hardware_scb *)hscb_map->vaddr)[offset]; 6779 hscb_busaddr = hscb_map->physaddr + (offset * sizeof(*hscb)); 6780 } else { 6781 hscb_map = kmalloc(sizeof(*hscb_map), GFP_ATOMIC); 6782 6783 if (hscb_map == NULL) 6784 return; 6785 6786 /* Allocate the next batch of hardware SCBs */ 6787 if (ahd_dmamem_alloc(ahd, scb_data->hscb_dmat, 6788 (void **)&hscb_map->vaddr, 6789 BUS_DMA_NOWAIT, &hscb_map->dmamap) != 0) { 6790 kfree(hscb_map); 6791 return; 6792 } 6793 6794 SLIST_INSERT_HEAD(&scb_data->hscb_maps, hscb_map, links); 6795 6796 ahd_dmamap_load(ahd, scb_data->hscb_dmat, hscb_map->dmamap, 6797 hscb_map->vaddr, PAGE_SIZE, ahd_dmamap_cb, 6798 &hscb_map->physaddr, /*flags*/0); 6799 6800 hscb = (struct hardware_scb *)hscb_map->vaddr; 6801 hscb_busaddr = hscb_map->physaddr; 6802 scb_data->scbs_left = PAGE_SIZE / sizeof(*hscb); 6803 } 6804 6805 if (scb_data->sgs_left != 0) { 6806 int offset; 6807 6808 offset = ((ahd_sglist_allocsize(ahd) / ahd_sglist_size(ahd)) 6809 - scb_data->sgs_left) * ahd_sglist_size(ahd); 6810 sg_map = SLIST_FIRST(&scb_data->sg_maps); 6811 segs = sg_map->vaddr + offset; 6812 sg_busaddr = sg_map->physaddr + offset; 6813 } else { 6814 sg_map = kmalloc(sizeof(*sg_map), GFP_ATOMIC); 6815 6816 if (sg_map == NULL) 6817 return; 6818 6819 /* Allocate the next batch of S/G lists */ 6820 if (ahd_dmamem_alloc(ahd, scb_data->sg_dmat, 6821 (void **)&sg_map->vaddr, 6822 BUS_DMA_NOWAIT, &sg_map->dmamap) != 0) { 6823 kfree(sg_map); 6824 return; 6825 } 6826 6827 SLIST_INSERT_HEAD(&scb_data->sg_maps, sg_map, links); 6828 6829 ahd_dmamap_load(ahd, scb_data->sg_dmat, sg_map->dmamap, 6830 sg_map->vaddr, ahd_sglist_allocsize(ahd), 6831 ahd_dmamap_cb, &sg_map->physaddr, /*flags*/0); 6832 6833 segs = sg_map->vaddr; 6834 sg_busaddr = sg_map->physaddr; 6835 scb_data->sgs_left = 6836 ahd_sglist_allocsize(ahd) / ahd_sglist_size(ahd); 6837 #ifdef AHD_DEBUG 6838 if (ahd_debug & AHD_SHOW_MEMORY) 6839 printk("Mapped SG data\n"); 6840 #endif 6841 } 6842 6843 if (scb_data->sense_left != 0) { 6844 int offset; 6845 6846 offset = PAGE_SIZE - (AHD_SENSE_BUFSIZE * scb_data->sense_left); 6847 sense_map = SLIST_FIRST(&scb_data->sense_maps); 6848 sense_data = sense_map->vaddr + offset; 6849 sense_busaddr = sense_map->physaddr + offset; 6850 } else { 6851 sense_map = kmalloc(sizeof(*sense_map), GFP_ATOMIC); 6852 6853 if (sense_map == NULL) 6854 return; 6855 6856 /* Allocate the next batch of sense buffers */ 6857 if (ahd_dmamem_alloc(ahd, scb_data->sense_dmat, 6858 (void **)&sense_map->vaddr, 6859 BUS_DMA_NOWAIT, &sense_map->dmamap) != 0) { 6860 kfree(sense_map); 6861 return; 6862 } 6863 6864 SLIST_INSERT_HEAD(&scb_data->sense_maps, sense_map, links); 6865 6866 ahd_dmamap_load(ahd, scb_data->sense_dmat, sense_map->dmamap, 6867 sense_map->vaddr, PAGE_SIZE, ahd_dmamap_cb, 6868 &sense_map->physaddr, /*flags*/0); 6869 6870 sense_data = sense_map->vaddr; 6871 sense_busaddr = sense_map->physaddr; 6872 scb_data->sense_left = PAGE_SIZE / AHD_SENSE_BUFSIZE; 6873 #ifdef AHD_DEBUG 6874 if (ahd_debug & AHD_SHOW_MEMORY) 6875 printk("Mapped sense data\n"); 6876 #endif 6877 } 6878 6879 newcount = min(scb_data->sense_left, scb_data->scbs_left); 6880 newcount = min(newcount, scb_data->sgs_left); 6881 newcount = min(newcount, (AHD_SCB_MAX_ALLOC - scb_data->numscbs)); 6882 for (i = 0; i < newcount; i++) { 6883 struct scb_platform_data *pdata; 6884 u_int col_tag; 6885 6886 next_scb = kmalloc(sizeof(*next_scb), GFP_ATOMIC); 6887 if (next_scb == NULL) 6888 break; 6889 6890 pdata = kmalloc(sizeof(*pdata), GFP_ATOMIC); 6891 if (pdata == NULL) { 6892 kfree(next_scb); 6893 break; 6894 } 6895 next_scb->platform_data = pdata; 6896 next_scb->hscb_map = hscb_map; 6897 next_scb->sg_map = sg_map; 6898 next_scb->sense_map = sense_map; 6899 next_scb->sg_list = segs; 6900 next_scb->sense_data = sense_data; 6901 next_scb->sense_busaddr = sense_busaddr; 6902 memset(hscb, 0, sizeof(*hscb)); 6903 next_scb->hscb = hscb; 6904 hscb->hscb_busaddr = ahd_htole32(hscb_busaddr); 6905 6906 /* 6907 * The sequencer always starts with the second entry. 6908 * The first entry is embedded in the scb. 6909 */ 6910 next_scb->sg_list_busaddr = sg_busaddr; 6911 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) 6912 next_scb->sg_list_busaddr 6913 += sizeof(struct ahd_dma64_seg); 6914 else 6915 next_scb->sg_list_busaddr += sizeof(struct ahd_dma_seg); 6916 next_scb->ahd_softc = ahd; 6917 next_scb->flags = SCB_FLAG_NONE; 6918 next_scb->hscb->tag = ahd_htole16(scb_data->numscbs); 6919 col_tag = scb_data->numscbs ^ 0x100; 6920 next_scb->col_scb = ahd_find_scb_by_tag(ahd, col_tag); 6921 if (next_scb->col_scb != NULL) 6922 next_scb->col_scb->col_scb = next_scb; 6923 ahd_free_scb(ahd, next_scb); 6924 hscb++; 6925 hscb_busaddr += sizeof(*hscb); 6926 segs += ahd_sglist_size(ahd); 6927 sg_busaddr += ahd_sglist_size(ahd); 6928 sense_data += AHD_SENSE_BUFSIZE; 6929 sense_busaddr += AHD_SENSE_BUFSIZE; 6930 scb_data->numscbs++; 6931 scb_data->sense_left--; 6932 scb_data->scbs_left--; 6933 scb_data->sgs_left--; 6934 } 6935 } 6936 6937 void 6938 ahd_controller_info(struct ahd_softc *ahd, char *buf) 6939 { 6940 const char *speed; 6941 const char *type; 6942 int len; 6943 6944 len = sprintf(buf, "%s: ", ahd_chip_names[ahd->chip & AHD_CHIPID_MASK]); 6945 buf += len; 6946 6947 speed = "Ultra320 "; 6948 if ((ahd->features & AHD_WIDE) != 0) { 6949 type = "Wide "; 6950 } else { 6951 type = "Single "; 6952 } 6953 len = sprintf(buf, "%s%sChannel %c, SCSI Id=%d, ", 6954 speed, type, ahd->channel, ahd->our_id); 6955 buf += len; 6956 6957 sprintf(buf, "%s, %d SCBs", ahd->bus_description, 6958 ahd->scb_data.maxhscbs); 6959 } 6960 6961 static const char *channel_strings[] = { 6962 "Primary Low", 6963 "Primary High", 6964 "Secondary Low", 6965 "Secondary High" 6966 }; 6967 6968 static const char *termstat_strings[] = { 6969 "Terminated Correctly", 6970 "Over Terminated", 6971 "Under Terminated", 6972 "Not Configured" 6973 }; 6974 6975 /***************************** Timer Facilities *******************************/ 6976 static void 6977 ahd_timer_reset(struct timer_list *timer, int usec) 6978 { 6979 del_timer(timer); 6980 timer->expires = jiffies + (usec * HZ)/1000000; 6981 add_timer(timer); 6982 } 6983 6984 /* 6985 * Start the board, ready for normal operation 6986 */ 6987 int 6988 ahd_init(struct ahd_softc *ahd) 6989 { 6990 uint8_t *next_vaddr; 6991 dma_addr_t next_baddr; 6992 size_t driver_data_size; 6993 int i; 6994 int error; 6995 u_int warn_user; 6996 uint8_t current_sensing; 6997 uint8_t fstat; 6998 6999 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 7000 7001 ahd->stack_size = ahd_probe_stack_size(ahd); 7002 ahd->saved_stack = kmalloc_array(ahd->stack_size, sizeof(uint16_t), 7003 GFP_ATOMIC); 7004 if (ahd->saved_stack == NULL) 7005 return (ENOMEM); 7006 7007 /* 7008 * Verify that the compiler hasn't over-aggressively 7009 * padded important structures. 7010 */ 7011 if (sizeof(struct hardware_scb) != 64) 7012 panic("Hardware SCB size is incorrect"); 7013 7014 #ifdef AHD_DEBUG 7015 if ((ahd_debug & AHD_DEBUG_SEQUENCER) != 0) 7016 ahd->flags |= AHD_SEQUENCER_DEBUG; 7017 #endif 7018 7019 /* 7020 * Default to allowing initiator operations. 7021 */ 7022 ahd->flags |= AHD_INITIATORROLE; 7023 7024 /* 7025 * Only allow target mode features if this unit has them enabled. 7026 */ 7027 if ((AHD_TMODE_ENABLE & (0x1 << ahd->unit)) == 0) 7028 ahd->features &= ~AHD_TARGETMODE; 7029 7030 ahd->init_level++; 7031 7032 /* 7033 * DMA tag for our command fifos and other data in system memory 7034 * the card's sequencer must be able to access. For initiator 7035 * roles, we need to allocate space for the qoutfifo. When providing 7036 * for the target mode role, we must additionally provide space for 7037 * the incoming target command fifo. 7038 */ 7039 driver_data_size = AHD_SCB_MAX * sizeof(*ahd->qoutfifo) 7040 + sizeof(struct hardware_scb); 7041 if ((ahd->features & AHD_TARGETMODE) != 0) 7042 driver_data_size += AHD_TMODE_CMDS * sizeof(struct target_cmd); 7043 if ((ahd->bugs & AHD_PKT_BITBUCKET_BUG) != 0) 7044 driver_data_size += PKT_OVERRUN_BUFSIZE; 7045 if (ahd_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/1, 7046 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1, 7047 /*lowaddr*/BUS_SPACE_MAXADDR_32BIT, 7048 /*highaddr*/BUS_SPACE_MAXADDR, 7049 /*filter*/NULL, /*filterarg*/NULL, 7050 driver_data_size, 7051 /*nsegments*/1, 7052 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT, 7053 /*flags*/0, &ahd->shared_data_dmat) != 0) { 7054 return (ENOMEM); 7055 } 7056 7057 ahd->init_level++; 7058 7059 /* Allocation of driver data */ 7060 if (ahd_dmamem_alloc(ahd, ahd->shared_data_dmat, 7061 (void **)&ahd->shared_data_map.vaddr, 7062 BUS_DMA_NOWAIT, 7063 &ahd->shared_data_map.dmamap) != 0) { 7064 return (ENOMEM); 7065 } 7066 7067 ahd->init_level++; 7068 7069 /* And permanently map it in */ 7070 ahd_dmamap_load(ahd, ahd->shared_data_dmat, ahd->shared_data_map.dmamap, 7071 ahd->shared_data_map.vaddr, driver_data_size, 7072 ahd_dmamap_cb, &ahd->shared_data_map.physaddr, 7073 /*flags*/0); 7074 ahd->qoutfifo = (struct ahd_completion *)ahd->shared_data_map.vaddr; 7075 next_vaddr = (uint8_t *)&ahd->qoutfifo[AHD_QOUT_SIZE]; 7076 next_baddr = ahd->shared_data_map.physaddr 7077 + AHD_QOUT_SIZE*sizeof(struct ahd_completion); 7078 if ((ahd->features & AHD_TARGETMODE) != 0) { 7079 ahd->targetcmds = (struct target_cmd *)next_vaddr; 7080 next_vaddr += AHD_TMODE_CMDS * sizeof(struct target_cmd); 7081 next_baddr += AHD_TMODE_CMDS * sizeof(struct target_cmd); 7082 } 7083 7084 if ((ahd->bugs & AHD_PKT_BITBUCKET_BUG) != 0) { 7085 ahd->overrun_buf = next_vaddr; 7086 next_vaddr += PKT_OVERRUN_BUFSIZE; 7087 next_baddr += PKT_OVERRUN_BUFSIZE; 7088 } 7089 7090 /* 7091 * We need one SCB to serve as the "next SCB". Since the 7092 * tag identifier in this SCB will never be used, there is 7093 * no point in using a valid HSCB tag from an SCB pulled from 7094 * the standard free pool. So, we allocate this "sentinel" 7095 * specially from the DMA safe memory chunk used for the QOUTFIFO. 7096 */ 7097 ahd->next_queued_hscb = (struct hardware_scb *)next_vaddr; 7098 ahd->next_queued_hscb_map = &ahd->shared_data_map; 7099 ahd->next_queued_hscb->hscb_busaddr = ahd_htole32(next_baddr); 7100 7101 ahd->init_level++; 7102 7103 /* Allocate SCB data now that buffer_dmat is initialized */ 7104 if (ahd_init_scbdata(ahd) != 0) 7105 return (ENOMEM); 7106 7107 if ((ahd->flags & AHD_INITIATORROLE) == 0) 7108 ahd->flags &= ~AHD_RESET_BUS_A; 7109 7110 /* 7111 * Before committing these settings to the chip, give 7112 * the OSM one last chance to modify our configuration. 7113 */ 7114 ahd_platform_init(ahd); 7115 7116 /* Bring up the chip. */ 7117 ahd_chip_init(ahd); 7118 7119 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 7120 7121 if ((ahd->flags & AHD_CURRENT_SENSING) == 0) 7122 goto init_done; 7123 7124 /* 7125 * Verify termination based on current draw and 7126 * warn user if the bus is over/under terminated. 7127 */ 7128 error = ahd_write_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL, 7129 CURSENSE_ENB); 7130 if (error != 0) { 7131 printk("%s: current sensing timeout 1\n", ahd_name(ahd)); 7132 goto init_done; 7133 } 7134 for (i = 20, fstat = FLX_FSTAT_BUSY; 7135 (fstat & FLX_FSTAT_BUSY) != 0 && i; i--) { 7136 error = ahd_read_flexport(ahd, FLXADDR_FLEXSTAT, &fstat); 7137 if (error != 0) { 7138 printk("%s: current sensing timeout 2\n", 7139 ahd_name(ahd)); 7140 goto init_done; 7141 } 7142 } 7143 if (i == 0) { 7144 printk("%s: Timedout during current-sensing test\n", 7145 ahd_name(ahd)); 7146 goto init_done; 7147 } 7148 7149 /* Latch Current Sensing status. */ 7150 error = ahd_read_flexport(ahd, FLXADDR_CURRENT_STAT, ¤t_sensing); 7151 if (error != 0) { 7152 printk("%s: current sensing timeout 3\n", ahd_name(ahd)); 7153 goto init_done; 7154 } 7155 7156 /* Diable current sensing. */ 7157 ahd_write_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL, 0); 7158 7159 #ifdef AHD_DEBUG 7160 if ((ahd_debug & AHD_SHOW_TERMCTL) != 0) { 7161 printk("%s: current_sensing == 0x%x\n", 7162 ahd_name(ahd), current_sensing); 7163 } 7164 #endif 7165 warn_user = 0; 7166 for (i = 0; i < 4; i++, current_sensing >>= FLX_CSTAT_SHIFT) { 7167 u_int term_stat; 7168 7169 term_stat = (current_sensing & FLX_CSTAT_MASK); 7170 switch (term_stat) { 7171 case FLX_CSTAT_OVER: 7172 case FLX_CSTAT_UNDER: 7173 warn_user++; 7174 fallthrough; 7175 case FLX_CSTAT_INVALID: 7176 case FLX_CSTAT_OKAY: 7177 if (warn_user == 0 && bootverbose == 0) 7178 break; 7179 printk("%s: %s Channel %s\n", ahd_name(ahd), 7180 channel_strings[i], termstat_strings[term_stat]); 7181 break; 7182 } 7183 } 7184 if (warn_user) { 7185 printk("%s: WARNING. Termination is not configured correctly.\n" 7186 "%s: WARNING. SCSI bus operations may FAIL.\n", 7187 ahd_name(ahd), ahd_name(ahd)); 7188 } 7189 init_done: 7190 ahd_restart(ahd); 7191 ahd_timer_reset(&ahd->stat_timer, AHD_STAT_UPDATE_US); 7192 return (0); 7193 } 7194 7195 /* 7196 * (Re)initialize chip state after a chip reset. 7197 */ 7198 static void 7199 ahd_chip_init(struct ahd_softc *ahd) 7200 { 7201 uint32_t busaddr; 7202 u_int sxfrctl1; 7203 u_int scsiseq_template; 7204 u_int wait; 7205 u_int i; 7206 u_int target; 7207 7208 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 7209 /* 7210 * Take the LED out of diagnostic mode 7211 */ 7212 ahd_outb(ahd, SBLKCTL, ahd_inb(ahd, SBLKCTL) & ~(DIAGLEDEN|DIAGLEDON)); 7213 7214 /* 7215 * Return HS_MAILBOX to its default value. 7216 */ 7217 ahd->hs_mailbox = 0; 7218 ahd_outb(ahd, HS_MAILBOX, 0); 7219 7220 /* Set the SCSI Id, SXFRCTL0, SXFRCTL1, and SIMODE1. */ 7221 ahd_outb(ahd, IOWNID, ahd->our_id); 7222 ahd_outb(ahd, TOWNID, ahd->our_id); 7223 sxfrctl1 = (ahd->flags & AHD_TERM_ENB_A) != 0 ? STPWEN : 0; 7224 sxfrctl1 |= (ahd->flags & AHD_SPCHK_ENB_A) != 0 ? ENSPCHK : 0; 7225 if ((ahd->bugs & AHD_LONG_SETIMO_BUG) 7226 && (ahd->seltime != STIMESEL_MIN)) { 7227 /* 7228 * The selection timer duration is twice as long 7229 * as it should be. Halve it by adding "1" to 7230 * the user specified setting. 7231 */ 7232 sxfrctl1 |= ahd->seltime + STIMESEL_BUG_ADJ; 7233 } else { 7234 sxfrctl1 |= ahd->seltime; 7235 } 7236 7237 ahd_outb(ahd, SXFRCTL0, DFON); 7238 ahd_outb(ahd, SXFRCTL1, sxfrctl1|ahd->seltime|ENSTIMER|ACTNEGEN); 7239 ahd_outb(ahd, SIMODE1, ENSELTIMO|ENSCSIRST|ENSCSIPERR); 7240 7241 /* 7242 * Now that termination is set, wait for up 7243 * to 500ms for our transceivers to settle. If 7244 * the adapter does not have a cable attached, 7245 * the transceivers may never settle, so don't 7246 * complain if we fail here. 7247 */ 7248 for (wait = 10000; 7249 (ahd_inb(ahd, SBLKCTL) & (ENAB40|ENAB20)) == 0 && wait; 7250 wait--) 7251 ahd_delay(100); 7252 7253 /* Clear any false bus resets due to the transceivers settling */ 7254 ahd_outb(ahd, CLRSINT1, CLRSCSIRSTI); 7255 ahd_outb(ahd, CLRINT, CLRSCSIINT); 7256 7257 /* Initialize mode specific S/G state. */ 7258 for (i = 0; i < 2; i++) { 7259 ahd_set_modes(ahd, AHD_MODE_DFF0 + i, AHD_MODE_DFF0 + i); 7260 ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR); 7261 ahd_outb(ahd, SG_STATE, 0); 7262 ahd_outb(ahd, CLRSEQINTSRC, 0xFF); 7263 ahd_outb(ahd, SEQIMODE, 7264 ENSAVEPTRS|ENCFG4DATA|ENCFG4ISTAT 7265 |ENCFG4TSTAT|ENCFG4ICMD|ENCFG4TCMD); 7266 } 7267 7268 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 7269 ahd_outb(ahd, DSCOMMAND0, ahd_inb(ahd, DSCOMMAND0)|MPARCKEN|CACHETHEN); 7270 ahd_outb(ahd, DFF_THRSH, RD_DFTHRSH_75|WR_DFTHRSH_75); 7271 ahd_outb(ahd, SIMODE0, ENIOERR|ENOVERRUN); 7272 ahd_outb(ahd, SIMODE3, ENNTRAMPERR|ENOSRAMPERR); 7273 if ((ahd->bugs & AHD_BUSFREEREV_BUG) != 0) { 7274 ahd_outb(ahd, OPTIONMODE, AUTOACKEN|AUTO_MSGOUT_DE); 7275 } else { 7276 ahd_outb(ahd, OPTIONMODE, AUTOACKEN|BUSFREEREV|AUTO_MSGOUT_DE); 7277 } 7278 ahd_outb(ahd, SCSCHKN, CURRFIFODEF|WIDERESEN|SHVALIDSTDIS); 7279 if ((ahd->chip & AHD_BUS_MASK) == AHD_PCIX) 7280 /* 7281 * Do not issue a target abort when a split completion 7282 * error occurs. Let our PCIX interrupt handler deal 7283 * with it instead. H2A4 Razor #625 7284 */ 7285 ahd_outb(ahd, PCIXCTL, ahd_inb(ahd, PCIXCTL) | SPLTSTADIS); 7286 7287 if ((ahd->bugs & AHD_LQOOVERRUN_BUG) != 0) 7288 ahd_outb(ahd, LQOSCSCTL, LQONOCHKOVER); 7289 7290 /* 7291 * Tweak IOCELL settings. 7292 */ 7293 if ((ahd->flags & AHD_HP_BOARD) != 0) { 7294 for (i = 0; i < NUMDSPS; i++) { 7295 ahd_outb(ahd, DSPSELECT, i); 7296 ahd_outb(ahd, WRTBIASCTL, WRTBIASCTL_HP_DEFAULT); 7297 } 7298 #ifdef AHD_DEBUG 7299 if ((ahd_debug & AHD_SHOW_MISC) != 0) 7300 printk("%s: WRTBIASCTL now 0x%x\n", ahd_name(ahd), 7301 WRTBIASCTL_HP_DEFAULT); 7302 #endif 7303 } 7304 ahd_setup_iocell_workaround(ahd); 7305 7306 /* 7307 * Enable LQI Manager interrupts. 7308 */ 7309 ahd_outb(ahd, LQIMODE1, ENLQIPHASE_LQ|ENLQIPHASE_NLQ|ENLIQABORT 7310 | ENLQICRCI_LQ|ENLQICRCI_NLQ|ENLQIBADLQI 7311 | ENLQIOVERI_LQ|ENLQIOVERI_NLQ); 7312 ahd_outb(ahd, LQOMODE0, ENLQOATNLQ|ENLQOATNPKT|ENLQOTCRC); 7313 /* 7314 * We choose to have the sequencer catch LQOPHCHGINPKT errors 7315 * manually for the command phase at the start of a packetized 7316 * selection case. ENLQOBUSFREE should be made redundant by 7317 * the BUSFREE interrupt, but it seems that some LQOBUSFREE 7318 * events fail to assert the BUSFREE interrupt so we must 7319 * also enable LQOBUSFREE interrupts. 7320 */ 7321 ahd_outb(ahd, LQOMODE1, ENLQOBUSFREE); 7322 7323 /* 7324 * Setup sequencer interrupt handlers. 7325 */ 7326 ahd_outw(ahd, INTVEC1_ADDR, ahd_resolve_seqaddr(ahd, LABEL_seq_isr)); 7327 ahd_outw(ahd, INTVEC2_ADDR, ahd_resolve_seqaddr(ahd, LABEL_timer_isr)); 7328 7329 /* 7330 * Setup SCB Offset registers. 7331 */ 7332 if ((ahd->bugs & AHD_PKT_LUN_BUG) != 0) { 7333 ahd_outb(ahd, LUNPTR, offsetof(struct hardware_scb, 7334 pkt_long_lun)); 7335 } else { 7336 ahd_outb(ahd, LUNPTR, offsetof(struct hardware_scb, lun)); 7337 } 7338 ahd_outb(ahd, CMDLENPTR, offsetof(struct hardware_scb, cdb_len)); 7339 ahd_outb(ahd, ATTRPTR, offsetof(struct hardware_scb, task_attribute)); 7340 ahd_outb(ahd, FLAGPTR, offsetof(struct hardware_scb, task_management)); 7341 ahd_outb(ahd, CMDPTR, offsetof(struct hardware_scb, 7342 shared_data.idata.cdb)); 7343 ahd_outb(ahd, QNEXTPTR, 7344 offsetof(struct hardware_scb, next_hscb_busaddr)); 7345 ahd_outb(ahd, ABRTBITPTR, MK_MESSAGE_BIT_OFFSET); 7346 ahd_outb(ahd, ABRTBYTEPTR, offsetof(struct hardware_scb, control)); 7347 if ((ahd->bugs & AHD_PKT_LUN_BUG) != 0) { 7348 ahd_outb(ahd, LUNLEN, 7349 sizeof(ahd->next_queued_hscb->pkt_long_lun) - 1); 7350 } else { 7351 ahd_outb(ahd, LUNLEN, LUNLEN_SINGLE_LEVEL_LUN); 7352 } 7353 ahd_outb(ahd, CDBLIMIT, SCB_CDB_LEN_PTR - 1); 7354 ahd_outb(ahd, MAXCMD, 0xFF); 7355 ahd_outb(ahd, SCBAUTOPTR, 7356 AUSCBPTR_EN | offsetof(struct hardware_scb, tag)); 7357 7358 /* We haven't been enabled for target mode yet. */ 7359 ahd_outb(ahd, MULTARGID, 0); 7360 ahd_outb(ahd, MULTARGID + 1, 0); 7361 7362 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 7363 /* Initialize the negotiation table. */ 7364 if ((ahd->features & AHD_NEW_IOCELL_OPTS) == 0) { 7365 /* 7366 * Clear the spare bytes in the neg table to avoid 7367 * spurious parity errors. 7368 */ 7369 for (target = 0; target < AHD_NUM_TARGETS; target++) { 7370 ahd_outb(ahd, NEGOADDR, target); 7371 ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_PER_DEV0); 7372 for (i = 0; i < AHD_NUM_PER_DEV_ANNEXCOLS; i++) 7373 ahd_outb(ahd, ANNEXDAT, 0); 7374 } 7375 } 7376 for (target = 0; target < AHD_NUM_TARGETS; target++) { 7377 struct ahd_devinfo devinfo; 7378 struct ahd_initiator_tinfo *tinfo; 7379 struct ahd_tmode_tstate *tstate; 7380 7381 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id, 7382 target, &tstate); 7383 ahd_compile_devinfo(&devinfo, ahd->our_id, 7384 target, CAM_LUN_WILDCARD, 7385 'A', ROLE_INITIATOR); 7386 ahd_update_neg_table(ahd, &devinfo, &tinfo->curr); 7387 } 7388 7389 ahd_outb(ahd, CLRSINT3, NTRAMPERR|OSRAMPERR); 7390 ahd_outb(ahd, CLRINT, CLRSCSIINT); 7391 7392 #ifdef NEEDS_MORE_TESTING 7393 /* 7394 * Always enable abort on incoming L_Qs if this feature is 7395 * supported. We use this to catch invalid SCB references. 7396 */ 7397 if ((ahd->bugs & AHD_ABORT_LQI_BUG) == 0) 7398 ahd_outb(ahd, LQCTL1, ABORTPENDING); 7399 else 7400 #endif 7401 ahd_outb(ahd, LQCTL1, 0); 7402 7403 /* All of our queues are empty */ 7404 ahd->qoutfifonext = 0; 7405 ahd->qoutfifonext_valid_tag = QOUTFIFO_ENTRY_VALID; 7406 ahd_outb(ahd, QOUTFIFO_ENTRY_VALID_TAG, QOUTFIFO_ENTRY_VALID); 7407 for (i = 0; i < AHD_QOUT_SIZE; i++) 7408 ahd->qoutfifo[i].valid_tag = 0; 7409 ahd_sync_qoutfifo(ahd, BUS_DMASYNC_PREREAD); 7410 7411 ahd->qinfifonext = 0; 7412 for (i = 0; i < AHD_QIN_SIZE; i++) 7413 ahd->qinfifo[i] = SCB_LIST_NULL; 7414 7415 if ((ahd->features & AHD_TARGETMODE) != 0) { 7416 /* All target command blocks start out invalid. */ 7417 for (i = 0; i < AHD_TMODE_CMDS; i++) 7418 ahd->targetcmds[i].cmd_valid = 0; 7419 ahd_sync_tqinfifo(ahd, BUS_DMASYNC_PREREAD); 7420 ahd->tqinfifonext = 1; 7421 ahd_outb(ahd, KERNEL_TQINPOS, ahd->tqinfifonext - 1); 7422 ahd_outb(ahd, TQINPOS, ahd->tqinfifonext); 7423 } 7424 7425 /* Initialize Scratch Ram. */ 7426 ahd_outb(ahd, SEQ_FLAGS, 0); 7427 ahd_outb(ahd, SEQ_FLAGS2, 0); 7428 7429 /* We don't have any waiting selections */ 7430 ahd_outw(ahd, WAITING_TID_HEAD, SCB_LIST_NULL); 7431 ahd_outw(ahd, WAITING_TID_TAIL, SCB_LIST_NULL); 7432 ahd_outw(ahd, MK_MESSAGE_SCB, SCB_LIST_NULL); 7433 ahd_outw(ahd, MK_MESSAGE_SCSIID, 0xFF); 7434 for (i = 0; i < AHD_NUM_TARGETS; i++) 7435 ahd_outw(ahd, WAITING_SCB_TAILS + (2 * i), SCB_LIST_NULL); 7436 7437 /* 7438 * Nobody is waiting to be DMAed into the QOUTFIFO. 7439 */ 7440 ahd_outw(ahd, COMPLETE_SCB_HEAD, SCB_LIST_NULL); 7441 ahd_outw(ahd, COMPLETE_SCB_DMAINPROG_HEAD, SCB_LIST_NULL); 7442 ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, SCB_LIST_NULL); 7443 ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, SCB_LIST_NULL); 7444 ahd_outw(ahd, COMPLETE_ON_QFREEZE_HEAD, SCB_LIST_NULL); 7445 7446 /* 7447 * The Freeze Count is 0. 7448 */ 7449 ahd->qfreeze_cnt = 0; 7450 ahd_outw(ahd, QFREEZE_COUNT, 0); 7451 ahd_outw(ahd, KERNEL_QFREEZE_COUNT, 0); 7452 7453 /* 7454 * Tell the sequencer where it can find our arrays in memory. 7455 */ 7456 busaddr = ahd->shared_data_map.physaddr; 7457 ahd_outl(ahd, SHARED_DATA_ADDR, busaddr); 7458 ahd_outl(ahd, QOUTFIFO_NEXT_ADDR, busaddr); 7459 7460 /* 7461 * Setup the allowed SCSI Sequences based on operational mode. 7462 * If we are a target, we'll enable select in operations once 7463 * we've had a lun enabled. 7464 */ 7465 scsiseq_template = ENAUTOATNP; 7466 if ((ahd->flags & AHD_INITIATORROLE) != 0) 7467 scsiseq_template |= ENRSELI; 7468 ahd_outb(ahd, SCSISEQ_TEMPLATE, scsiseq_template); 7469 7470 /* There are no busy SCBs yet. */ 7471 for (target = 0; target < AHD_NUM_TARGETS; target++) { 7472 int lun; 7473 7474 for (lun = 0; lun < AHD_NUM_LUNS_NONPKT; lun++) 7475 ahd_unbusy_tcl(ahd, BUILD_TCL_RAW(target, 'A', lun)); 7476 } 7477 7478 /* 7479 * Initialize the group code to command length table. 7480 * Vendor Unique codes are set to 0 so we only capture 7481 * the first byte of the cdb. These can be overridden 7482 * when target mode is enabled. 7483 */ 7484 ahd_outb(ahd, CMDSIZE_TABLE, 5); 7485 ahd_outb(ahd, CMDSIZE_TABLE + 1, 9); 7486 ahd_outb(ahd, CMDSIZE_TABLE + 2, 9); 7487 ahd_outb(ahd, CMDSIZE_TABLE + 3, 0); 7488 ahd_outb(ahd, CMDSIZE_TABLE + 4, 15); 7489 ahd_outb(ahd, CMDSIZE_TABLE + 5, 11); 7490 ahd_outb(ahd, CMDSIZE_TABLE + 6, 0); 7491 ahd_outb(ahd, CMDSIZE_TABLE + 7, 0); 7492 7493 /* Tell the sequencer of our initial queue positions */ 7494 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 7495 ahd_outb(ahd, QOFF_CTLSTA, SCB_QSIZE_512); 7496 ahd->qinfifonext = 0; 7497 ahd_set_hnscb_qoff(ahd, ahd->qinfifonext); 7498 ahd_set_hescb_qoff(ahd, 0); 7499 ahd_set_snscb_qoff(ahd, 0); 7500 ahd_set_sescb_qoff(ahd, 0); 7501 ahd_set_sdscb_qoff(ahd, 0); 7502 7503 /* 7504 * Tell the sequencer which SCB will be the next one it receives. 7505 */ 7506 busaddr = ahd_le32toh(ahd->next_queued_hscb->hscb_busaddr); 7507 ahd_outl(ahd, NEXT_QUEUED_SCB_ADDR, busaddr); 7508 7509 /* 7510 * Default to coalescing disabled. 7511 */ 7512 ahd_outw(ahd, INT_COALESCING_CMDCOUNT, 0); 7513 ahd_outw(ahd, CMDS_PENDING, 0); 7514 ahd_update_coalescing_values(ahd, ahd->int_coalescing_timer, 7515 ahd->int_coalescing_maxcmds, 7516 ahd->int_coalescing_mincmds); 7517 ahd_enable_coalescing(ahd, FALSE); 7518 7519 ahd_loadseq(ahd); 7520 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 7521 7522 if (ahd->features & AHD_AIC79XXB_SLOWCRC) { 7523 u_int negodat3 = ahd_inb(ahd, NEGCONOPTS); 7524 7525 negodat3 |= ENSLOWCRC; 7526 ahd_outb(ahd, NEGCONOPTS, negodat3); 7527 negodat3 = ahd_inb(ahd, NEGCONOPTS); 7528 if (!(negodat3 & ENSLOWCRC)) 7529 printk("aic79xx: failed to set the SLOWCRC bit\n"); 7530 else 7531 printk("aic79xx: SLOWCRC bit set\n"); 7532 } 7533 } 7534 7535 /* 7536 * Setup default device and controller settings. 7537 * This should only be called if our probe has 7538 * determined that no configuration data is available. 7539 */ 7540 int 7541 ahd_default_config(struct ahd_softc *ahd) 7542 { 7543 int targ; 7544 7545 ahd->our_id = 7; 7546 7547 /* 7548 * Allocate a tstate to house information for our 7549 * initiator presence on the bus as well as the user 7550 * data for any target mode initiator. 7551 */ 7552 if (ahd_alloc_tstate(ahd, ahd->our_id, 'A') == NULL) { 7553 printk("%s: unable to allocate ahd_tmode_tstate. " 7554 "Failing attach\n", ahd_name(ahd)); 7555 return (ENOMEM); 7556 } 7557 7558 for (targ = 0; targ < AHD_NUM_TARGETS; targ++) { 7559 struct ahd_devinfo devinfo; 7560 struct ahd_initiator_tinfo *tinfo; 7561 struct ahd_tmode_tstate *tstate; 7562 uint16_t target_mask; 7563 7564 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id, 7565 targ, &tstate); 7566 /* 7567 * We support SPC2 and SPI4. 7568 */ 7569 tinfo->user.protocol_version = 4; 7570 tinfo->user.transport_version = 4; 7571 7572 target_mask = 0x01 << targ; 7573 ahd->user_discenable |= target_mask; 7574 tstate->discenable |= target_mask; 7575 ahd->user_tagenable |= target_mask; 7576 #ifdef AHD_FORCE_160 7577 tinfo->user.period = AHD_SYNCRATE_DT; 7578 #else 7579 tinfo->user.period = AHD_SYNCRATE_160; 7580 #endif 7581 tinfo->user.offset = MAX_OFFSET; 7582 tinfo->user.ppr_options = MSG_EXT_PPR_RD_STRM 7583 | MSG_EXT_PPR_WR_FLOW 7584 | MSG_EXT_PPR_HOLD_MCS 7585 | MSG_EXT_PPR_IU_REQ 7586 | MSG_EXT_PPR_QAS_REQ 7587 | MSG_EXT_PPR_DT_REQ; 7588 if ((ahd->features & AHD_RTI) != 0) 7589 tinfo->user.ppr_options |= MSG_EXT_PPR_RTI; 7590 7591 tinfo->user.width = MSG_EXT_WDTR_BUS_16_BIT; 7592 7593 /* 7594 * Start out Async/Narrow/Untagged and with 7595 * conservative protocol support. 7596 */ 7597 tinfo->goal.protocol_version = 2; 7598 tinfo->goal.transport_version = 2; 7599 tinfo->curr.protocol_version = 2; 7600 tinfo->curr.transport_version = 2; 7601 ahd_compile_devinfo(&devinfo, ahd->our_id, 7602 targ, CAM_LUN_WILDCARD, 7603 'A', ROLE_INITIATOR); 7604 tstate->tagenable &= ~target_mask; 7605 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT, 7606 AHD_TRANS_CUR|AHD_TRANS_GOAL, /*paused*/TRUE); 7607 ahd_set_syncrate(ahd, &devinfo, /*period*/0, /*offset*/0, 7608 /*ppr_options*/0, AHD_TRANS_CUR|AHD_TRANS_GOAL, 7609 /*paused*/TRUE); 7610 } 7611 return (0); 7612 } 7613 7614 /* 7615 * Parse device configuration information. 7616 */ 7617 int 7618 ahd_parse_cfgdata(struct ahd_softc *ahd, struct seeprom_config *sc) 7619 { 7620 int targ; 7621 int max_targ; 7622 7623 max_targ = sc->max_targets & CFMAXTARG; 7624 ahd->our_id = sc->brtime_id & CFSCSIID; 7625 7626 /* 7627 * Allocate a tstate to house information for our 7628 * initiator presence on the bus as well as the user 7629 * data for any target mode initiator. 7630 */ 7631 if (ahd_alloc_tstate(ahd, ahd->our_id, 'A') == NULL) { 7632 printk("%s: unable to allocate ahd_tmode_tstate. " 7633 "Failing attach\n", ahd_name(ahd)); 7634 return (ENOMEM); 7635 } 7636 7637 for (targ = 0; targ < max_targ; targ++) { 7638 struct ahd_devinfo devinfo; 7639 struct ahd_initiator_tinfo *tinfo; 7640 struct ahd_transinfo *user_tinfo; 7641 struct ahd_tmode_tstate *tstate; 7642 uint16_t target_mask; 7643 7644 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id, 7645 targ, &tstate); 7646 user_tinfo = &tinfo->user; 7647 7648 /* 7649 * We support SPC2 and SPI4. 7650 */ 7651 tinfo->user.protocol_version = 4; 7652 tinfo->user.transport_version = 4; 7653 7654 target_mask = 0x01 << targ; 7655 ahd->user_discenable &= ~target_mask; 7656 tstate->discenable &= ~target_mask; 7657 ahd->user_tagenable &= ~target_mask; 7658 if (sc->device_flags[targ] & CFDISC) { 7659 tstate->discenable |= target_mask; 7660 ahd->user_discenable |= target_mask; 7661 ahd->user_tagenable |= target_mask; 7662 } else { 7663 /* 7664 * Cannot be packetized without disconnection. 7665 */ 7666 sc->device_flags[targ] &= ~CFPACKETIZED; 7667 } 7668 7669 user_tinfo->ppr_options = 0; 7670 user_tinfo->period = (sc->device_flags[targ] & CFXFER); 7671 if (user_tinfo->period < CFXFER_ASYNC) { 7672 if (user_tinfo->period <= AHD_PERIOD_10MHz) 7673 user_tinfo->ppr_options |= MSG_EXT_PPR_DT_REQ; 7674 user_tinfo->offset = MAX_OFFSET; 7675 } else { 7676 user_tinfo->offset = 0; 7677 user_tinfo->period = AHD_ASYNC_XFER_PERIOD; 7678 } 7679 #ifdef AHD_FORCE_160 7680 if (user_tinfo->period <= AHD_SYNCRATE_160) 7681 user_tinfo->period = AHD_SYNCRATE_DT; 7682 #endif 7683 7684 if ((sc->device_flags[targ] & CFPACKETIZED) != 0) { 7685 user_tinfo->ppr_options |= MSG_EXT_PPR_RD_STRM 7686 | MSG_EXT_PPR_WR_FLOW 7687 | MSG_EXT_PPR_HOLD_MCS 7688 | MSG_EXT_PPR_IU_REQ; 7689 if ((ahd->features & AHD_RTI) != 0) 7690 user_tinfo->ppr_options |= MSG_EXT_PPR_RTI; 7691 } 7692 7693 if ((sc->device_flags[targ] & CFQAS) != 0) 7694 user_tinfo->ppr_options |= MSG_EXT_PPR_QAS_REQ; 7695 7696 if ((sc->device_flags[targ] & CFWIDEB) != 0) 7697 user_tinfo->width = MSG_EXT_WDTR_BUS_16_BIT; 7698 else 7699 user_tinfo->width = MSG_EXT_WDTR_BUS_8_BIT; 7700 #ifdef AHD_DEBUG 7701 if ((ahd_debug & AHD_SHOW_MISC) != 0) 7702 printk("(%d): %x:%x:%x:%x\n", targ, user_tinfo->width, 7703 user_tinfo->period, user_tinfo->offset, 7704 user_tinfo->ppr_options); 7705 #endif 7706 /* 7707 * Start out Async/Narrow/Untagged and with 7708 * conservative protocol support. 7709 */ 7710 tstate->tagenable &= ~target_mask; 7711 tinfo->goal.protocol_version = 2; 7712 tinfo->goal.transport_version = 2; 7713 tinfo->curr.protocol_version = 2; 7714 tinfo->curr.transport_version = 2; 7715 ahd_compile_devinfo(&devinfo, ahd->our_id, 7716 targ, CAM_LUN_WILDCARD, 7717 'A', ROLE_INITIATOR); 7718 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT, 7719 AHD_TRANS_CUR|AHD_TRANS_GOAL, /*paused*/TRUE); 7720 ahd_set_syncrate(ahd, &devinfo, /*period*/0, /*offset*/0, 7721 /*ppr_options*/0, AHD_TRANS_CUR|AHD_TRANS_GOAL, 7722 /*paused*/TRUE); 7723 } 7724 7725 ahd->flags &= ~AHD_SPCHK_ENB_A; 7726 if (sc->bios_control & CFSPARITY) 7727 ahd->flags |= AHD_SPCHK_ENB_A; 7728 7729 ahd->flags &= ~AHD_RESET_BUS_A; 7730 if (sc->bios_control & CFRESETB) 7731 ahd->flags |= AHD_RESET_BUS_A; 7732 7733 ahd->flags &= ~AHD_EXTENDED_TRANS_A; 7734 if (sc->bios_control & CFEXTEND) 7735 ahd->flags |= AHD_EXTENDED_TRANS_A; 7736 7737 ahd->flags &= ~AHD_BIOS_ENABLED; 7738 if ((sc->bios_control & CFBIOSSTATE) == CFBS_ENABLED) 7739 ahd->flags |= AHD_BIOS_ENABLED; 7740 7741 ahd->flags &= ~AHD_STPWLEVEL_A; 7742 if ((sc->adapter_control & CFSTPWLEVEL) != 0) 7743 ahd->flags |= AHD_STPWLEVEL_A; 7744 7745 return (0); 7746 } 7747 7748 /* 7749 * Parse device configuration information. 7750 */ 7751 int 7752 ahd_parse_vpddata(struct ahd_softc *ahd, struct vpd_config *vpd) 7753 { 7754 int error; 7755 7756 error = ahd_verify_vpd_cksum(vpd); 7757 if (error == 0) 7758 return (EINVAL); 7759 if ((vpd->bios_flags & VPDBOOTHOST) != 0) 7760 ahd->flags |= AHD_BOOT_CHANNEL; 7761 return (0); 7762 } 7763 7764 void 7765 ahd_intr_enable(struct ahd_softc *ahd, int enable) 7766 { 7767 u_int hcntrl; 7768 7769 hcntrl = ahd_inb(ahd, HCNTRL); 7770 hcntrl &= ~INTEN; 7771 ahd->pause &= ~INTEN; 7772 ahd->unpause &= ~INTEN; 7773 if (enable) { 7774 hcntrl |= INTEN; 7775 ahd->pause |= INTEN; 7776 ahd->unpause |= INTEN; 7777 } 7778 ahd_outb(ahd, HCNTRL, hcntrl); 7779 } 7780 7781 static void 7782 ahd_update_coalescing_values(struct ahd_softc *ahd, u_int timer, u_int maxcmds, 7783 u_int mincmds) 7784 { 7785 if (timer > AHD_TIMER_MAX_US) 7786 timer = AHD_TIMER_MAX_US; 7787 ahd->int_coalescing_timer = timer; 7788 7789 if (maxcmds > AHD_INT_COALESCING_MAXCMDS_MAX) 7790 maxcmds = AHD_INT_COALESCING_MAXCMDS_MAX; 7791 if (mincmds > AHD_INT_COALESCING_MINCMDS_MAX) 7792 mincmds = AHD_INT_COALESCING_MINCMDS_MAX; 7793 ahd->int_coalescing_maxcmds = maxcmds; 7794 ahd_outw(ahd, INT_COALESCING_TIMER, timer / AHD_TIMER_US_PER_TICK); 7795 ahd_outb(ahd, INT_COALESCING_MAXCMDS, -maxcmds); 7796 ahd_outb(ahd, INT_COALESCING_MINCMDS, -mincmds); 7797 } 7798 7799 static void 7800 ahd_enable_coalescing(struct ahd_softc *ahd, int enable) 7801 { 7802 7803 ahd->hs_mailbox &= ~ENINT_COALESCE; 7804 if (enable) 7805 ahd->hs_mailbox |= ENINT_COALESCE; 7806 ahd_outb(ahd, HS_MAILBOX, ahd->hs_mailbox); 7807 ahd_flush_device_writes(ahd); 7808 ahd_run_qoutfifo(ahd); 7809 } 7810 7811 /* 7812 * Ensure that the card is paused in a location 7813 * outside of all critical sections and that all 7814 * pending work is completed prior to returning. 7815 * This routine should only be called from outside 7816 * an interrupt context. 7817 */ 7818 void 7819 ahd_pause_and_flushwork(struct ahd_softc *ahd) 7820 { 7821 u_int intstat; 7822 u_int maxloops; 7823 7824 maxloops = 1000; 7825 ahd->flags |= AHD_ALL_INTERRUPTS; 7826 ahd_pause(ahd); 7827 /* 7828 * Freeze the outgoing selections. We do this only 7829 * until we are safely paused without further selections 7830 * pending. 7831 */ 7832 ahd->qfreeze_cnt--; 7833 ahd_outw(ahd, KERNEL_QFREEZE_COUNT, ahd->qfreeze_cnt); 7834 ahd_outb(ahd, SEQ_FLAGS2, ahd_inb(ahd, SEQ_FLAGS2) | SELECTOUT_QFROZEN); 7835 do { 7836 7837 ahd_unpause(ahd); 7838 /* 7839 * Give the sequencer some time to service 7840 * any active selections. 7841 */ 7842 ahd_delay(500); 7843 7844 ahd_intr(ahd); 7845 ahd_pause(ahd); 7846 intstat = ahd_inb(ahd, INTSTAT); 7847 if ((intstat & INT_PEND) == 0) { 7848 ahd_clear_critical_section(ahd); 7849 intstat = ahd_inb(ahd, INTSTAT); 7850 } 7851 } while (--maxloops 7852 && (intstat != 0xFF || (ahd->features & AHD_REMOVABLE) == 0) 7853 && ((intstat & INT_PEND) != 0 7854 || (ahd_inb(ahd, SCSISEQ0) & ENSELO) != 0 7855 || (ahd_inb(ahd, SSTAT0) & (SELDO|SELINGO)) != 0)); 7856 7857 if (maxloops == 0) { 7858 printk("Infinite interrupt loop, INTSTAT = %x", 7859 ahd_inb(ahd, INTSTAT)); 7860 } 7861 ahd->qfreeze_cnt++; 7862 ahd_outw(ahd, KERNEL_QFREEZE_COUNT, ahd->qfreeze_cnt); 7863 7864 ahd_flush_qoutfifo(ahd); 7865 7866 ahd->flags &= ~AHD_ALL_INTERRUPTS; 7867 } 7868 7869 #ifdef CONFIG_PM 7870 int 7871 ahd_suspend(struct ahd_softc *ahd) 7872 { 7873 7874 ahd_pause_and_flushwork(ahd); 7875 7876 if (LIST_FIRST(&ahd->pending_scbs) != NULL) { 7877 ahd_unpause(ahd); 7878 return (EBUSY); 7879 } 7880 ahd_shutdown(ahd); 7881 return (0); 7882 } 7883 7884 void 7885 ahd_resume(struct ahd_softc *ahd) 7886 { 7887 7888 ahd_reset(ahd, /*reinit*/TRUE); 7889 ahd_intr_enable(ahd, TRUE); 7890 ahd_restart(ahd); 7891 } 7892 #endif 7893 7894 /************************** Busy Target Table *********************************/ 7895 /* 7896 * Set SCBPTR to the SCB that contains the busy 7897 * table entry for TCL. Return the offset into 7898 * the SCB that contains the entry for TCL. 7899 * saved_scbid is dereferenced and set to the 7900 * scbid that should be restored once manipualtion 7901 * of the TCL entry is complete. 7902 */ 7903 static inline u_int 7904 ahd_index_busy_tcl(struct ahd_softc *ahd, u_int *saved_scbid, u_int tcl) 7905 { 7906 /* 7907 * Index to the SCB that contains the busy entry. 7908 */ 7909 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 7910 *saved_scbid = ahd_get_scbptr(ahd); 7911 ahd_set_scbptr(ahd, TCL_LUN(tcl) 7912 | ((TCL_TARGET_OFFSET(tcl) & 0xC) << 4)); 7913 7914 /* 7915 * And now calculate the SCB offset to the entry. 7916 * Each entry is 2 bytes wide, hence the 7917 * multiplication by 2. 7918 */ 7919 return (((TCL_TARGET_OFFSET(tcl) & 0x3) << 1) + SCB_DISCONNECTED_LISTS); 7920 } 7921 7922 /* 7923 * Return the untagged transaction id for a given target/channel lun. 7924 */ 7925 static u_int 7926 ahd_find_busy_tcl(struct ahd_softc *ahd, u_int tcl) 7927 { 7928 u_int scbid; 7929 u_int scb_offset; 7930 u_int saved_scbptr; 7931 7932 scb_offset = ahd_index_busy_tcl(ahd, &saved_scbptr, tcl); 7933 scbid = ahd_inw_scbram(ahd, scb_offset); 7934 ahd_set_scbptr(ahd, saved_scbptr); 7935 return (scbid); 7936 } 7937 7938 static void 7939 ahd_busy_tcl(struct ahd_softc *ahd, u_int tcl, u_int scbid) 7940 { 7941 u_int scb_offset; 7942 u_int saved_scbptr; 7943 7944 scb_offset = ahd_index_busy_tcl(ahd, &saved_scbptr, tcl); 7945 ahd_outw(ahd, scb_offset, scbid); 7946 ahd_set_scbptr(ahd, saved_scbptr); 7947 } 7948 7949 /************************** SCB and SCB queue management **********************/ 7950 static int 7951 ahd_match_scb(struct ahd_softc *ahd, struct scb *scb, int target, 7952 char channel, int lun, u_int tag, role_t role) 7953 { 7954 int targ = SCB_GET_TARGET(ahd, scb); 7955 char chan = SCB_GET_CHANNEL(ahd, scb); 7956 int slun = SCB_GET_LUN(scb); 7957 int match; 7958 7959 match = ((chan == channel) || (channel == ALL_CHANNELS)); 7960 if (match != 0) 7961 match = ((targ == target) || (target == CAM_TARGET_WILDCARD)); 7962 if (match != 0) 7963 match = ((lun == slun) || (lun == CAM_LUN_WILDCARD)); 7964 if (match != 0) { 7965 #ifdef AHD_TARGET_MODE 7966 int group; 7967 7968 group = XPT_FC_GROUP(scb->io_ctx->ccb_h.func_code); 7969 if (role == ROLE_INITIATOR) { 7970 match = (group != XPT_FC_GROUP_TMODE) 7971 && ((tag == SCB_GET_TAG(scb)) 7972 || (tag == SCB_LIST_NULL)); 7973 } else if (role == ROLE_TARGET) { 7974 match = (group == XPT_FC_GROUP_TMODE) 7975 && ((tag == scb->io_ctx->csio.tag_id) 7976 || (tag == SCB_LIST_NULL)); 7977 } 7978 #else /* !AHD_TARGET_MODE */ 7979 match = ((tag == SCB_GET_TAG(scb)) || (tag == SCB_LIST_NULL)); 7980 #endif /* AHD_TARGET_MODE */ 7981 } 7982 7983 return match; 7984 } 7985 7986 static void 7987 ahd_freeze_devq(struct ahd_softc *ahd, struct scb *scb) 7988 { 7989 int target; 7990 char channel; 7991 int lun; 7992 7993 target = SCB_GET_TARGET(ahd, scb); 7994 lun = SCB_GET_LUN(scb); 7995 channel = SCB_GET_CHANNEL(ahd, scb); 7996 7997 ahd_search_qinfifo(ahd, target, channel, lun, 7998 /*tag*/SCB_LIST_NULL, ROLE_UNKNOWN, 7999 CAM_REQUEUE_REQ, SEARCH_COMPLETE); 8000 8001 ahd_platform_freeze_devq(ahd, scb); 8002 } 8003 8004 void 8005 ahd_qinfifo_requeue_tail(struct ahd_softc *ahd, struct scb *scb) 8006 { 8007 struct scb *prev_scb; 8008 ahd_mode_state saved_modes; 8009 8010 saved_modes = ahd_save_modes(ahd); 8011 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 8012 prev_scb = NULL; 8013 if (ahd_qinfifo_count(ahd) != 0) { 8014 u_int prev_tag; 8015 u_int prev_pos; 8016 8017 prev_pos = AHD_QIN_WRAP(ahd->qinfifonext - 1); 8018 prev_tag = ahd->qinfifo[prev_pos]; 8019 prev_scb = ahd_lookup_scb(ahd, prev_tag); 8020 } 8021 ahd_qinfifo_requeue(ahd, prev_scb, scb); 8022 ahd_set_hnscb_qoff(ahd, ahd->qinfifonext); 8023 ahd_restore_modes(ahd, saved_modes); 8024 } 8025 8026 static void 8027 ahd_qinfifo_requeue(struct ahd_softc *ahd, struct scb *prev_scb, 8028 struct scb *scb) 8029 { 8030 if (prev_scb == NULL) { 8031 uint32_t busaddr; 8032 8033 busaddr = ahd_le32toh(scb->hscb->hscb_busaddr); 8034 ahd_outl(ahd, NEXT_QUEUED_SCB_ADDR, busaddr); 8035 } else { 8036 prev_scb->hscb->next_hscb_busaddr = scb->hscb->hscb_busaddr; 8037 ahd_sync_scb(ahd, prev_scb, 8038 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 8039 } 8040 ahd->qinfifo[AHD_QIN_WRAP(ahd->qinfifonext)] = SCB_GET_TAG(scb); 8041 ahd->qinfifonext++; 8042 scb->hscb->next_hscb_busaddr = ahd->next_queued_hscb->hscb_busaddr; 8043 ahd_sync_scb(ahd, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 8044 } 8045 8046 static int 8047 ahd_qinfifo_count(struct ahd_softc *ahd) 8048 { 8049 u_int qinpos; 8050 u_int wrap_qinpos; 8051 u_int wrap_qinfifonext; 8052 8053 AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK); 8054 qinpos = ahd_get_snscb_qoff(ahd); 8055 wrap_qinpos = AHD_QIN_WRAP(qinpos); 8056 wrap_qinfifonext = AHD_QIN_WRAP(ahd->qinfifonext); 8057 if (wrap_qinfifonext >= wrap_qinpos) 8058 return (wrap_qinfifonext - wrap_qinpos); 8059 else 8060 return (wrap_qinfifonext 8061 + ARRAY_SIZE(ahd->qinfifo) - wrap_qinpos); 8062 } 8063 8064 static void 8065 ahd_reset_cmds_pending(struct ahd_softc *ahd) 8066 { 8067 struct scb *scb; 8068 ahd_mode_state saved_modes; 8069 u_int pending_cmds; 8070 8071 saved_modes = ahd_save_modes(ahd); 8072 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 8073 8074 /* 8075 * Don't count any commands as outstanding that the 8076 * sequencer has already marked for completion. 8077 */ 8078 ahd_flush_qoutfifo(ahd); 8079 8080 pending_cmds = 0; 8081 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) { 8082 pending_cmds++; 8083 } 8084 ahd_outw(ahd, CMDS_PENDING, pending_cmds - ahd_qinfifo_count(ahd)); 8085 ahd_restore_modes(ahd, saved_modes); 8086 ahd->flags &= ~AHD_UPDATE_PEND_CMDS; 8087 } 8088 8089 static void 8090 ahd_done_with_status(struct ahd_softc *ahd, struct scb *scb, uint32_t status) 8091 { 8092 cam_status ostat; 8093 cam_status cstat; 8094 8095 ostat = ahd_get_transaction_status(scb); 8096 if (ostat == CAM_REQ_INPROG) 8097 ahd_set_transaction_status(scb, status); 8098 cstat = ahd_get_transaction_status(scb); 8099 if (cstat != CAM_REQ_CMP) 8100 ahd_freeze_scb(scb); 8101 ahd_done(ahd, scb); 8102 } 8103 8104 int 8105 ahd_search_qinfifo(struct ahd_softc *ahd, int target, char channel, 8106 int lun, u_int tag, role_t role, uint32_t status, 8107 ahd_search_action action) 8108 { 8109 struct scb *scb; 8110 struct scb *mk_msg_scb; 8111 struct scb *prev_scb; 8112 ahd_mode_state saved_modes; 8113 u_int qinstart; 8114 u_int qinpos; 8115 u_int qintail; 8116 u_int tid_next; 8117 u_int tid_prev; 8118 u_int scbid; 8119 u_int seq_flags2; 8120 u_int savedscbptr; 8121 uint32_t busaddr; 8122 int found; 8123 int targets; 8124 8125 /* Must be in CCHAN mode */ 8126 saved_modes = ahd_save_modes(ahd); 8127 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 8128 8129 /* 8130 * Halt any pending SCB DMA. The sequencer will reinitiate 8131 * this dma if the qinfifo is not empty once we unpause. 8132 */ 8133 if ((ahd_inb(ahd, CCSCBCTL) & (CCARREN|CCSCBEN|CCSCBDIR)) 8134 == (CCARREN|CCSCBEN|CCSCBDIR)) { 8135 ahd_outb(ahd, CCSCBCTL, 8136 ahd_inb(ahd, CCSCBCTL) & ~(CCARREN|CCSCBEN)); 8137 while ((ahd_inb(ahd, CCSCBCTL) & (CCARREN|CCSCBEN)) != 0) 8138 ; 8139 } 8140 /* Determine sequencer's position in the qinfifo. */ 8141 qintail = AHD_QIN_WRAP(ahd->qinfifonext); 8142 qinstart = ahd_get_snscb_qoff(ahd); 8143 qinpos = AHD_QIN_WRAP(qinstart); 8144 found = 0; 8145 prev_scb = NULL; 8146 8147 if (action == SEARCH_PRINT) { 8148 printk("qinstart = %d qinfifonext = %d\nQINFIFO:", 8149 qinstart, ahd->qinfifonext); 8150 } 8151 8152 /* 8153 * Start with an empty queue. Entries that are not chosen 8154 * for removal will be re-added to the queue as we go. 8155 */ 8156 ahd->qinfifonext = qinstart; 8157 busaddr = ahd_le32toh(ahd->next_queued_hscb->hscb_busaddr); 8158 ahd_outl(ahd, NEXT_QUEUED_SCB_ADDR, busaddr); 8159 8160 while (qinpos != qintail) { 8161 scb = ahd_lookup_scb(ahd, ahd->qinfifo[qinpos]); 8162 if (scb == NULL) { 8163 printk("qinpos = %d, SCB index = %d\n", 8164 qinpos, ahd->qinfifo[qinpos]); 8165 panic("Loop 1\n"); 8166 } 8167 8168 if (ahd_match_scb(ahd, scb, target, channel, lun, tag, role)) { 8169 /* 8170 * We found an scb that needs to be acted on. 8171 */ 8172 found++; 8173 switch (action) { 8174 case SEARCH_COMPLETE: 8175 if ((scb->flags & SCB_ACTIVE) == 0) 8176 printk("Inactive SCB in qinfifo\n"); 8177 ahd_done_with_status(ahd, scb, status); 8178 fallthrough; 8179 case SEARCH_REMOVE: 8180 break; 8181 case SEARCH_PRINT: 8182 printk(" 0x%x", ahd->qinfifo[qinpos]); 8183 fallthrough; 8184 case SEARCH_COUNT: 8185 ahd_qinfifo_requeue(ahd, prev_scb, scb); 8186 prev_scb = scb; 8187 break; 8188 } 8189 } else { 8190 ahd_qinfifo_requeue(ahd, prev_scb, scb); 8191 prev_scb = scb; 8192 } 8193 qinpos = AHD_QIN_WRAP(qinpos+1); 8194 } 8195 8196 ahd_set_hnscb_qoff(ahd, ahd->qinfifonext); 8197 8198 if (action == SEARCH_PRINT) 8199 printk("\nWAITING_TID_QUEUES:\n"); 8200 8201 /* 8202 * Search waiting for selection lists. We traverse the 8203 * list of "their ids" waiting for selection and, if 8204 * appropriate, traverse the SCBs of each "their id" 8205 * looking for matches. 8206 */ 8207 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 8208 seq_flags2 = ahd_inb(ahd, SEQ_FLAGS2); 8209 if ((seq_flags2 & PENDING_MK_MESSAGE) != 0) { 8210 scbid = ahd_inw(ahd, MK_MESSAGE_SCB); 8211 mk_msg_scb = ahd_lookup_scb(ahd, scbid); 8212 } else 8213 mk_msg_scb = NULL; 8214 savedscbptr = ahd_get_scbptr(ahd); 8215 tid_next = ahd_inw(ahd, WAITING_TID_HEAD); 8216 tid_prev = SCB_LIST_NULL; 8217 targets = 0; 8218 for (scbid = tid_next; !SCBID_IS_NULL(scbid); scbid = tid_next) { 8219 u_int tid_head; 8220 u_int tid_tail; 8221 8222 targets++; 8223 if (targets > AHD_NUM_TARGETS) 8224 panic("TID LIST LOOP"); 8225 8226 if (scbid >= ahd->scb_data.numscbs) { 8227 printk("%s: Waiting TID List inconsistency. " 8228 "SCB index == 0x%x, yet numscbs == 0x%x.", 8229 ahd_name(ahd), scbid, ahd->scb_data.numscbs); 8230 ahd_dump_card_state(ahd); 8231 panic("for safety"); 8232 } 8233 scb = ahd_lookup_scb(ahd, scbid); 8234 if (scb == NULL) { 8235 printk("%s: SCB = 0x%x Not Active!\n", 8236 ahd_name(ahd), scbid); 8237 panic("Waiting TID List traversal\n"); 8238 } 8239 ahd_set_scbptr(ahd, scbid); 8240 tid_next = ahd_inw_scbram(ahd, SCB_NEXT2); 8241 if (ahd_match_scb(ahd, scb, target, channel, CAM_LUN_WILDCARD, 8242 SCB_LIST_NULL, ROLE_UNKNOWN) == 0) { 8243 tid_prev = scbid; 8244 continue; 8245 } 8246 8247 /* 8248 * We found a list of scbs that needs to be searched. 8249 */ 8250 if (action == SEARCH_PRINT) 8251 printk(" %d ( ", SCB_GET_TARGET(ahd, scb)); 8252 tid_head = scbid; 8253 found += ahd_search_scb_list(ahd, target, channel, 8254 lun, tag, role, status, 8255 action, &tid_head, &tid_tail, 8256 SCB_GET_TARGET(ahd, scb)); 8257 /* 8258 * Check any MK_MESSAGE SCB that is still waiting to 8259 * enter this target's waiting for selection queue. 8260 */ 8261 if (mk_msg_scb != NULL 8262 && ahd_match_scb(ahd, mk_msg_scb, target, channel, 8263 lun, tag, role)) { 8264 8265 /* 8266 * We found an scb that needs to be acted on. 8267 */ 8268 found++; 8269 switch (action) { 8270 case SEARCH_COMPLETE: 8271 if ((mk_msg_scb->flags & SCB_ACTIVE) == 0) 8272 printk("Inactive SCB pending MK_MSG\n"); 8273 ahd_done_with_status(ahd, mk_msg_scb, status); 8274 fallthrough; 8275 case SEARCH_REMOVE: 8276 { 8277 u_int tail_offset; 8278 8279 printk("Removing MK_MSG scb\n"); 8280 8281 /* 8282 * Reset our tail to the tail of the 8283 * main per-target list. 8284 */ 8285 tail_offset = WAITING_SCB_TAILS 8286 + (2 * SCB_GET_TARGET(ahd, mk_msg_scb)); 8287 ahd_outw(ahd, tail_offset, tid_tail); 8288 8289 seq_flags2 &= ~PENDING_MK_MESSAGE; 8290 ahd_outb(ahd, SEQ_FLAGS2, seq_flags2); 8291 ahd_outw(ahd, CMDS_PENDING, 8292 ahd_inw(ahd, CMDS_PENDING)-1); 8293 mk_msg_scb = NULL; 8294 break; 8295 } 8296 case SEARCH_PRINT: 8297 printk(" 0x%x", SCB_GET_TAG(scb)); 8298 fallthrough; 8299 case SEARCH_COUNT: 8300 break; 8301 } 8302 } 8303 8304 if (mk_msg_scb != NULL 8305 && SCBID_IS_NULL(tid_head) 8306 && ahd_match_scb(ahd, scb, target, channel, CAM_LUN_WILDCARD, 8307 SCB_LIST_NULL, ROLE_UNKNOWN)) { 8308 8309 /* 8310 * When removing the last SCB for a target 8311 * queue with a pending MK_MESSAGE scb, we 8312 * must queue the MK_MESSAGE scb. 8313 */ 8314 printk("Queueing mk_msg_scb\n"); 8315 tid_head = ahd_inw(ahd, MK_MESSAGE_SCB); 8316 seq_flags2 &= ~PENDING_MK_MESSAGE; 8317 ahd_outb(ahd, SEQ_FLAGS2, seq_flags2); 8318 mk_msg_scb = NULL; 8319 } 8320 if (tid_head != scbid) 8321 ahd_stitch_tid_list(ahd, tid_prev, tid_head, tid_next); 8322 if (!SCBID_IS_NULL(tid_head)) 8323 tid_prev = tid_head; 8324 if (action == SEARCH_PRINT) 8325 printk(")\n"); 8326 } 8327 8328 /* Restore saved state. */ 8329 ahd_set_scbptr(ahd, savedscbptr); 8330 ahd_restore_modes(ahd, saved_modes); 8331 return (found); 8332 } 8333 8334 static int 8335 ahd_search_scb_list(struct ahd_softc *ahd, int target, char channel, 8336 int lun, u_int tag, role_t role, uint32_t status, 8337 ahd_search_action action, u_int *list_head, 8338 u_int *list_tail, u_int tid) 8339 { 8340 struct scb *scb; 8341 u_int scbid; 8342 u_int next; 8343 u_int prev; 8344 int found; 8345 8346 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 8347 found = 0; 8348 prev = SCB_LIST_NULL; 8349 next = *list_head; 8350 *list_tail = SCB_LIST_NULL; 8351 for (scbid = next; !SCBID_IS_NULL(scbid); scbid = next) { 8352 if (scbid >= ahd->scb_data.numscbs) { 8353 printk("%s:SCB List inconsistency. " 8354 "SCB == 0x%x, yet numscbs == 0x%x.", 8355 ahd_name(ahd), scbid, ahd->scb_data.numscbs); 8356 ahd_dump_card_state(ahd); 8357 panic("for safety"); 8358 } 8359 scb = ahd_lookup_scb(ahd, scbid); 8360 if (scb == NULL) { 8361 printk("%s: SCB = %d Not Active!\n", 8362 ahd_name(ahd), scbid); 8363 panic("Waiting List traversal\n"); 8364 } 8365 ahd_set_scbptr(ahd, scbid); 8366 *list_tail = scbid; 8367 next = ahd_inw_scbram(ahd, SCB_NEXT); 8368 if (ahd_match_scb(ahd, scb, target, channel, 8369 lun, SCB_LIST_NULL, role) == 0) { 8370 prev = scbid; 8371 continue; 8372 } 8373 found++; 8374 switch (action) { 8375 case SEARCH_COMPLETE: 8376 if ((scb->flags & SCB_ACTIVE) == 0) 8377 printk("Inactive SCB in Waiting List\n"); 8378 ahd_done_with_status(ahd, scb, status); 8379 fallthrough; 8380 case SEARCH_REMOVE: 8381 ahd_rem_wscb(ahd, scbid, prev, next, tid); 8382 *list_tail = prev; 8383 if (SCBID_IS_NULL(prev)) 8384 *list_head = next; 8385 break; 8386 case SEARCH_PRINT: 8387 printk("0x%x ", scbid); 8388 fallthrough; 8389 case SEARCH_COUNT: 8390 prev = scbid; 8391 break; 8392 } 8393 if (found > AHD_SCB_MAX) 8394 panic("SCB LIST LOOP"); 8395 } 8396 if (action == SEARCH_COMPLETE 8397 || action == SEARCH_REMOVE) 8398 ahd_outw(ahd, CMDS_PENDING, ahd_inw(ahd, CMDS_PENDING) - found); 8399 return (found); 8400 } 8401 8402 static void 8403 ahd_stitch_tid_list(struct ahd_softc *ahd, u_int tid_prev, 8404 u_int tid_cur, u_int tid_next) 8405 { 8406 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 8407 8408 if (SCBID_IS_NULL(tid_cur)) { 8409 8410 /* Bypass current TID list */ 8411 if (SCBID_IS_NULL(tid_prev)) { 8412 ahd_outw(ahd, WAITING_TID_HEAD, tid_next); 8413 } else { 8414 ahd_set_scbptr(ahd, tid_prev); 8415 ahd_outw(ahd, SCB_NEXT2, tid_next); 8416 } 8417 if (SCBID_IS_NULL(tid_next)) 8418 ahd_outw(ahd, WAITING_TID_TAIL, tid_prev); 8419 } else { 8420 8421 /* Stitch through tid_cur */ 8422 if (SCBID_IS_NULL(tid_prev)) { 8423 ahd_outw(ahd, WAITING_TID_HEAD, tid_cur); 8424 } else { 8425 ahd_set_scbptr(ahd, tid_prev); 8426 ahd_outw(ahd, SCB_NEXT2, tid_cur); 8427 } 8428 ahd_set_scbptr(ahd, tid_cur); 8429 ahd_outw(ahd, SCB_NEXT2, tid_next); 8430 8431 if (SCBID_IS_NULL(tid_next)) 8432 ahd_outw(ahd, WAITING_TID_TAIL, tid_cur); 8433 } 8434 } 8435 8436 /* 8437 * Manipulate the waiting for selection list and return the 8438 * scb that follows the one that we remove. 8439 */ 8440 static u_int 8441 ahd_rem_wscb(struct ahd_softc *ahd, u_int scbid, 8442 u_int prev, u_int next, u_int tid) 8443 { 8444 u_int tail_offset; 8445 8446 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 8447 if (!SCBID_IS_NULL(prev)) { 8448 ahd_set_scbptr(ahd, prev); 8449 ahd_outw(ahd, SCB_NEXT, next); 8450 } 8451 8452 /* 8453 * SCBs that have MK_MESSAGE set in them may 8454 * cause the tail pointer to be updated without 8455 * setting the next pointer of the previous tail. 8456 * Only clear the tail if the removed SCB was 8457 * the tail. 8458 */ 8459 tail_offset = WAITING_SCB_TAILS + (2 * tid); 8460 if (SCBID_IS_NULL(next) 8461 && ahd_inw(ahd, tail_offset) == scbid) 8462 ahd_outw(ahd, tail_offset, prev); 8463 8464 ahd_add_scb_to_free_list(ahd, scbid); 8465 return (next); 8466 } 8467 8468 /* 8469 * Add the SCB as selected by SCBPTR onto the on chip list of 8470 * free hardware SCBs. This list is empty/unused if we are not 8471 * performing SCB paging. 8472 */ 8473 static void 8474 ahd_add_scb_to_free_list(struct ahd_softc *ahd, u_int scbid) 8475 { 8476 /* XXX Need some other mechanism to designate "free". */ 8477 /* 8478 * Invalidate the tag so that our abort 8479 * routines don't think it's active. 8480 ahd_outb(ahd, SCB_TAG, SCB_LIST_NULL); 8481 */ 8482 } 8483 8484 /******************************** Error Handling ******************************/ 8485 /* 8486 * Abort all SCBs that match the given description (target/channel/lun/tag), 8487 * setting their status to the passed in status if the status has not already 8488 * been modified from CAM_REQ_INPROG. This routine assumes that the sequencer 8489 * is paused before it is called. 8490 */ 8491 static int 8492 ahd_abort_scbs(struct ahd_softc *ahd, int target, char channel, 8493 int lun, u_int tag, role_t role, uint32_t status) 8494 { 8495 struct scb *scbp; 8496 struct scb *scbp_next; 8497 u_int i, j; 8498 u_int maxtarget; 8499 u_int minlun; 8500 u_int maxlun; 8501 int found; 8502 ahd_mode_state saved_modes; 8503 8504 /* restore this when we're done */ 8505 saved_modes = ahd_save_modes(ahd); 8506 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 8507 8508 found = ahd_search_qinfifo(ahd, target, channel, lun, SCB_LIST_NULL, 8509 role, CAM_REQUEUE_REQ, SEARCH_COMPLETE); 8510 8511 /* 8512 * Clean out the busy target table for any untagged commands. 8513 */ 8514 i = 0; 8515 maxtarget = 16; 8516 if (target != CAM_TARGET_WILDCARD) { 8517 i = target; 8518 if (channel == 'B') 8519 i += 8; 8520 maxtarget = i + 1; 8521 } 8522 8523 if (lun == CAM_LUN_WILDCARD) { 8524 minlun = 0; 8525 maxlun = AHD_NUM_LUNS_NONPKT; 8526 } else if (lun >= AHD_NUM_LUNS_NONPKT) { 8527 minlun = maxlun = 0; 8528 } else { 8529 minlun = lun; 8530 maxlun = lun + 1; 8531 } 8532 8533 if (role != ROLE_TARGET) { 8534 for (;i < maxtarget; i++) { 8535 for (j = minlun;j < maxlun; j++) { 8536 u_int scbid; 8537 u_int tcl; 8538 8539 tcl = BUILD_TCL_RAW(i, 'A', j); 8540 scbid = ahd_find_busy_tcl(ahd, tcl); 8541 scbp = ahd_lookup_scb(ahd, scbid); 8542 if (scbp == NULL 8543 || ahd_match_scb(ahd, scbp, target, channel, 8544 lun, tag, role) == 0) 8545 continue; 8546 ahd_unbusy_tcl(ahd, BUILD_TCL_RAW(i, 'A', j)); 8547 } 8548 } 8549 } 8550 8551 /* 8552 * Don't abort commands that have already completed, 8553 * but haven't quite made it up to the host yet. 8554 */ 8555 ahd_flush_qoutfifo(ahd); 8556 8557 /* 8558 * Go through the pending CCB list and look for 8559 * commands for this target that are still active. 8560 * These are other tagged commands that were 8561 * disconnected when the reset occurred. 8562 */ 8563 scbp_next = LIST_FIRST(&ahd->pending_scbs); 8564 while (scbp_next != NULL) { 8565 scbp = scbp_next; 8566 scbp_next = LIST_NEXT(scbp, pending_links); 8567 if (ahd_match_scb(ahd, scbp, target, channel, lun, tag, role)) { 8568 cam_status ostat; 8569 8570 ostat = ahd_get_transaction_status(scbp); 8571 if (ostat == CAM_REQ_INPROG) 8572 ahd_set_transaction_status(scbp, status); 8573 if (ahd_get_transaction_status(scbp) != CAM_REQ_CMP) 8574 ahd_freeze_scb(scbp); 8575 if ((scbp->flags & SCB_ACTIVE) == 0) 8576 printk("Inactive SCB on pending list\n"); 8577 ahd_done(ahd, scbp); 8578 found++; 8579 } 8580 } 8581 ahd_restore_modes(ahd, saved_modes); 8582 ahd_platform_abort_scbs(ahd, target, channel, lun, tag, role, status); 8583 ahd->flags |= AHD_UPDATE_PEND_CMDS; 8584 return found; 8585 } 8586 8587 static void 8588 ahd_reset_current_bus(struct ahd_softc *ahd) 8589 { 8590 uint8_t scsiseq; 8591 8592 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 8593 ahd_outb(ahd, SIMODE1, ahd_inb(ahd, SIMODE1) & ~ENSCSIRST); 8594 scsiseq = ahd_inb(ahd, SCSISEQ0) & ~(ENSELO|ENARBO|SCSIRSTO); 8595 ahd_outb(ahd, SCSISEQ0, scsiseq | SCSIRSTO); 8596 ahd_flush_device_writes(ahd); 8597 ahd_delay(AHD_BUSRESET_DELAY); 8598 /* Turn off the bus reset */ 8599 ahd_outb(ahd, SCSISEQ0, scsiseq); 8600 ahd_flush_device_writes(ahd); 8601 ahd_delay(AHD_BUSRESET_DELAY); 8602 if ((ahd->bugs & AHD_SCSIRST_BUG) != 0) { 8603 /* 8604 * 2A Razor #474 8605 * Certain chip state is not cleared for 8606 * SCSI bus resets that we initiate, so 8607 * we must reset the chip. 8608 */ 8609 ahd_reset(ahd, /*reinit*/TRUE); 8610 ahd_intr_enable(ahd, /*enable*/TRUE); 8611 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 8612 } 8613 8614 ahd_clear_intstat(ahd); 8615 } 8616 8617 int 8618 ahd_reset_channel(struct ahd_softc *ahd, char channel, int initiate_reset) 8619 { 8620 struct ahd_devinfo caminfo; 8621 u_int initiator; 8622 u_int target; 8623 u_int max_scsiid; 8624 int found; 8625 u_int fifo; 8626 u_int next_fifo; 8627 uint8_t scsiseq; 8628 8629 /* 8630 * Check if the last bus reset is cleared 8631 */ 8632 if (ahd->flags & AHD_BUS_RESET_ACTIVE) { 8633 printk("%s: bus reset still active\n", 8634 ahd_name(ahd)); 8635 return 0; 8636 } 8637 ahd->flags |= AHD_BUS_RESET_ACTIVE; 8638 8639 ahd->pending_device = NULL; 8640 8641 ahd_compile_devinfo(&caminfo, 8642 CAM_TARGET_WILDCARD, 8643 CAM_TARGET_WILDCARD, 8644 CAM_LUN_WILDCARD, 8645 channel, ROLE_UNKNOWN); 8646 ahd_pause(ahd); 8647 8648 /* Make sure the sequencer is in a safe location. */ 8649 ahd_clear_critical_section(ahd); 8650 8651 /* 8652 * Run our command complete fifos to ensure that we perform 8653 * completion processing on any commands that 'completed' 8654 * before the reset occurred. 8655 */ 8656 ahd_run_qoutfifo(ahd); 8657 #ifdef AHD_TARGET_MODE 8658 if ((ahd->flags & AHD_TARGETROLE) != 0) { 8659 ahd_run_tqinfifo(ahd, /*paused*/TRUE); 8660 } 8661 #endif 8662 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 8663 8664 /* 8665 * Disable selections so no automatic hardware 8666 * functions will modify chip state. 8667 */ 8668 ahd_outb(ahd, SCSISEQ0, 0); 8669 ahd_outb(ahd, SCSISEQ1, 0); 8670 8671 /* 8672 * Safely shut down our DMA engines. Always start with 8673 * the FIFO that is not currently active (if any are 8674 * actively connected). 8675 */ 8676 next_fifo = fifo = ahd_inb(ahd, DFFSTAT) & CURRFIFO; 8677 if (next_fifo > CURRFIFO_1) 8678 /* If disconneced, arbitrarily start with FIFO1. */ 8679 next_fifo = fifo = 0; 8680 do { 8681 next_fifo ^= CURRFIFO_1; 8682 ahd_set_modes(ahd, next_fifo, next_fifo); 8683 ahd_outb(ahd, DFCNTRL, 8684 ahd_inb(ahd, DFCNTRL) & ~(SCSIEN|HDMAEN)); 8685 while ((ahd_inb(ahd, DFCNTRL) & HDMAENACK) != 0) 8686 ahd_delay(10); 8687 /* 8688 * Set CURRFIFO to the now inactive channel. 8689 */ 8690 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 8691 ahd_outb(ahd, DFFSTAT, next_fifo); 8692 } while (next_fifo != fifo); 8693 8694 /* 8695 * Reset the bus if we are initiating this reset 8696 */ 8697 ahd_clear_msg_state(ahd); 8698 ahd_outb(ahd, SIMODE1, 8699 ahd_inb(ahd, SIMODE1) & ~(ENBUSFREE|ENSCSIRST)); 8700 8701 if (initiate_reset) 8702 ahd_reset_current_bus(ahd); 8703 8704 ahd_clear_intstat(ahd); 8705 8706 /* 8707 * Clean up all the state information for the 8708 * pending transactions on this bus. 8709 */ 8710 found = ahd_abort_scbs(ahd, CAM_TARGET_WILDCARD, channel, 8711 CAM_LUN_WILDCARD, SCB_LIST_NULL, 8712 ROLE_UNKNOWN, CAM_SCSI_BUS_RESET); 8713 8714 /* 8715 * Cleanup anything left in the FIFOs. 8716 */ 8717 ahd_clear_fifo(ahd, 0); 8718 ahd_clear_fifo(ahd, 1); 8719 8720 /* 8721 * Clear SCSI interrupt status 8722 */ 8723 ahd_outb(ahd, CLRSINT1, CLRSCSIRSTI); 8724 8725 /* 8726 * Reenable selections 8727 */ 8728 ahd_outb(ahd, SIMODE1, ahd_inb(ahd, SIMODE1) | ENSCSIRST); 8729 scsiseq = ahd_inb(ahd, SCSISEQ_TEMPLATE); 8730 ahd_outb(ahd, SCSISEQ1, scsiseq & (ENSELI|ENRSELI|ENAUTOATNP)); 8731 8732 max_scsiid = (ahd->features & AHD_WIDE) ? 15 : 7; 8733 #ifdef AHD_TARGET_MODE 8734 /* 8735 * Send an immediate notify ccb to all target more peripheral 8736 * drivers affected by this action. 8737 */ 8738 for (target = 0; target <= max_scsiid; target++) { 8739 struct ahd_tmode_tstate* tstate; 8740 u_int lun; 8741 8742 tstate = ahd->enabled_targets[target]; 8743 if (tstate == NULL) 8744 continue; 8745 for (lun = 0; lun < AHD_NUM_LUNS; lun++) { 8746 struct ahd_tmode_lstate* lstate; 8747 8748 lstate = tstate->enabled_luns[lun]; 8749 if (lstate == NULL) 8750 continue; 8751 8752 ahd_queue_lstate_event(ahd, lstate, CAM_TARGET_WILDCARD, 8753 EVENT_TYPE_BUS_RESET, /*arg*/0); 8754 ahd_send_lstate_events(ahd, lstate); 8755 } 8756 } 8757 #endif 8758 /* 8759 * Revert to async/narrow transfers until we renegotiate. 8760 */ 8761 for (target = 0; target <= max_scsiid; target++) { 8762 8763 if (ahd->enabled_targets[target] == NULL) 8764 continue; 8765 for (initiator = 0; initiator <= max_scsiid; initiator++) { 8766 struct ahd_devinfo devinfo; 8767 8768 ahd_compile_devinfo(&devinfo, target, initiator, 8769 CAM_LUN_WILDCARD, 8770 'A', ROLE_UNKNOWN); 8771 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT, 8772 AHD_TRANS_CUR, /*paused*/TRUE); 8773 ahd_set_syncrate(ahd, &devinfo, /*period*/0, 8774 /*offset*/0, /*ppr_options*/0, 8775 AHD_TRANS_CUR, /*paused*/TRUE); 8776 } 8777 } 8778 8779 /* Notify the XPT that a bus reset occurred */ 8780 ahd_send_async(ahd, caminfo.channel, CAM_TARGET_WILDCARD, 8781 CAM_LUN_WILDCARD, AC_BUS_RESET); 8782 8783 ahd_restart(ahd); 8784 8785 return (found); 8786 } 8787 8788 /**************************** Statistics Processing ***************************/ 8789 static void 8790 ahd_stat_timer(struct timer_list *t) 8791 { 8792 struct ahd_softc *ahd = from_timer(ahd, t, stat_timer); 8793 u_long s; 8794 int enint_coal; 8795 8796 ahd_lock(ahd, &s); 8797 8798 enint_coal = ahd->hs_mailbox & ENINT_COALESCE; 8799 if (ahd->cmdcmplt_total > ahd->int_coalescing_threshold) 8800 enint_coal |= ENINT_COALESCE; 8801 else if (ahd->cmdcmplt_total < ahd->int_coalescing_stop_threshold) 8802 enint_coal &= ~ENINT_COALESCE; 8803 8804 if (enint_coal != (ahd->hs_mailbox & ENINT_COALESCE)) { 8805 ahd_enable_coalescing(ahd, enint_coal); 8806 #ifdef AHD_DEBUG 8807 if ((ahd_debug & AHD_SHOW_INT_COALESCING) != 0) 8808 printk("%s: Interrupt coalescing " 8809 "now %sabled. Cmds %d\n", 8810 ahd_name(ahd), 8811 (enint_coal & ENINT_COALESCE) ? "en" : "dis", 8812 ahd->cmdcmplt_total); 8813 #endif 8814 } 8815 8816 ahd->cmdcmplt_bucket = (ahd->cmdcmplt_bucket+1) & (AHD_STAT_BUCKETS-1); 8817 ahd->cmdcmplt_total -= ahd->cmdcmplt_counts[ahd->cmdcmplt_bucket]; 8818 ahd->cmdcmplt_counts[ahd->cmdcmplt_bucket] = 0; 8819 ahd_timer_reset(&ahd->stat_timer, AHD_STAT_UPDATE_US); 8820 ahd_unlock(ahd, &s); 8821 } 8822 8823 /****************************** Status Processing *****************************/ 8824 8825 static void 8826 ahd_handle_scsi_status(struct ahd_softc *ahd, struct scb *scb) 8827 { 8828 struct hardware_scb *hscb; 8829 int paused; 8830 8831 /* 8832 * The sequencer freezes its select-out queue 8833 * anytime a SCSI status error occurs. We must 8834 * handle the error and increment our qfreeze count 8835 * to allow the sequencer to continue. We don't 8836 * bother clearing critical sections here since all 8837 * operations are on data structures that the sequencer 8838 * is not touching once the queue is frozen. 8839 */ 8840 hscb = scb->hscb; 8841 8842 if (ahd_is_paused(ahd)) { 8843 paused = 1; 8844 } else { 8845 paused = 0; 8846 ahd_pause(ahd); 8847 } 8848 8849 /* Freeze the queue until the client sees the error. */ 8850 ahd_freeze_devq(ahd, scb); 8851 ahd_freeze_scb(scb); 8852 ahd->qfreeze_cnt++; 8853 ahd_outw(ahd, KERNEL_QFREEZE_COUNT, ahd->qfreeze_cnt); 8854 8855 if (paused == 0) 8856 ahd_unpause(ahd); 8857 8858 /* Don't want to clobber the original sense code */ 8859 if ((scb->flags & SCB_SENSE) != 0) { 8860 /* 8861 * Clear the SCB_SENSE Flag and perform 8862 * a normal command completion. 8863 */ 8864 scb->flags &= ~SCB_SENSE; 8865 ahd_set_transaction_status(scb, CAM_AUTOSENSE_FAIL); 8866 ahd_done(ahd, scb); 8867 return; 8868 } 8869 ahd_set_transaction_status(scb, CAM_SCSI_STATUS_ERROR); 8870 ahd_set_scsi_status(scb, hscb->shared_data.istatus.scsi_status); 8871 switch (hscb->shared_data.istatus.scsi_status) { 8872 case STATUS_PKT_SENSE: 8873 { 8874 struct scsi_status_iu_header *siu; 8875 8876 ahd_sync_sense(ahd, scb, BUS_DMASYNC_POSTREAD); 8877 siu = (struct scsi_status_iu_header *)scb->sense_data; 8878 ahd_set_scsi_status(scb, siu->status); 8879 #ifdef AHD_DEBUG 8880 if ((ahd_debug & AHD_SHOW_SENSE) != 0) { 8881 ahd_print_path(ahd, scb); 8882 printk("SCB 0x%x Received PKT Status of 0x%x\n", 8883 SCB_GET_TAG(scb), siu->status); 8884 printk("\tflags = 0x%x, sense len = 0x%x, " 8885 "pktfail = 0x%x\n", 8886 siu->flags, scsi_4btoul(siu->sense_length), 8887 scsi_4btoul(siu->pkt_failures_length)); 8888 } 8889 #endif 8890 if ((siu->flags & SIU_RSPVALID) != 0) { 8891 ahd_print_path(ahd, scb); 8892 if (scsi_4btoul(siu->pkt_failures_length) < 4) { 8893 printk("Unable to parse pkt_failures\n"); 8894 } else { 8895 8896 switch (SIU_PKTFAIL_CODE(siu)) { 8897 case SIU_PFC_NONE: 8898 printk("No packet failure found\n"); 8899 break; 8900 case SIU_PFC_CIU_FIELDS_INVALID: 8901 printk("Invalid Command IU Field\n"); 8902 break; 8903 case SIU_PFC_TMF_NOT_SUPPORTED: 8904 printk("TMF not supported\n"); 8905 break; 8906 case SIU_PFC_TMF_FAILED: 8907 printk("TMF failed\n"); 8908 break; 8909 case SIU_PFC_INVALID_TYPE_CODE: 8910 printk("Invalid L_Q Type code\n"); 8911 break; 8912 case SIU_PFC_ILLEGAL_REQUEST: 8913 printk("Illegal request\n"); 8914 default: 8915 break; 8916 } 8917 } 8918 if (siu->status == SCSI_STATUS_OK) 8919 ahd_set_transaction_status(scb, 8920 CAM_REQ_CMP_ERR); 8921 } 8922 if ((siu->flags & SIU_SNSVALID) != 0) { 8923 scb->flags |= SCB_PKT_SENSE; 8924 #ifdef AHD_DEBUG 8925 if ((ahd_debug & AHD_SHOW_SENSE) != 0) 8926 printk("Sense data available\n"); 8927 #endif 8928 } 8929 ahd_done(ahd, scb); 8930 break; 8931 } 8932 case SCSI_STATUS_CMD_TERMINATED: 8933 case SCSI_STATUS_CHECK_COND: 8934 { 8935 struct ahd_devinfo devinfo; 8936 struct ahd_dma_seg *sg; 8937 struct scsi_sense *sc; 8938 struct ahd_initiator_tinfo *targ_info; 8939 struct ahd_tmode_tstate *tstate; 8940 struct ahd_transinfo *tinfo; 8941 #ifdef AHD_DEBUG 8942 if (ahd_debug & AHD_SHOW_SENSE) { 8943 ahd_print_path(ahd, scb); 8944 printk("SCB %d: requests Check Status\n", 8945 SCB_GET_TAG(scb)); 8946 } 8947 #endif 8948 8949 if (ahd_perform_autosense(scb) == 0) 8950 break; 8951 8952 ahd_compile_devinfo(&devinfo, SCB_GET_OUR_ID(scb), 8953 SCB_GET_TARGET(ahd, scb), 8954 SCB_GET_LUN(scb), 8955 SCB_GET_CHANNEL(ahd, scb), 8956 ROLE_INITIATOR); 8957 targ_info = ahd_fetch_transinfo(ahd, 8958 devinfo.channel, 8959 devinfo.our_scsiid, 8960 devinfo.target, 8961 &tstate); 8962 tinfo = &targ_info->curr; 8963 sg = scb->sg_list; 8964 sc = (struct scsi_sense *)hscb->shared_data.idata.cdb; 8965 /* 8966 * Save off the residual if there is one. 8967 */ 8968 ahd_update_residual(ahd, scb); 8969 #ifdef AHD_DEBUG 8970 if (ahd_debug & AHD_SHOW_SENSE) { 8971 ahd_print_path(ahd, scb); 8972 printk("Sending Sense\n"); 8973 } 8974 #endif 8975 scb->sg_count = 0; 8976 sg = ahd_sg_setup(ahd, scb, sg, ahd_get_sense_bufaddr(ahd, scb), 8977 ahd_get_sense_bufsize(ahd, scb), 8978 /*last*/TRUE); 8979 sc->opcode = REQUEST_SENSE; 8980 sc->byte2 = 0; 8981 if (tinfo->protocol_version <= SCSI_REV_2 8982 && SCB_GET_LUN(scb) < 8) 8983 sc->byte2 = SCB_GET_LUN(scb) << 5; 8984 sc->unused[0] = 0; 8985 sc->unused[1] = 0; 8986 sc->length = ahd_get_sense_bufsize(ahd, scb); 8987 sc->control = 0; 8988 8989 /* 8990 * We can't allow the target to disconnect. 8991 * This will be an untagged transaction and 8992 * having the target disconnect will make this 8993 * transaction indestinguishable from outstanding 8994 * tagged transactions. 8995 */ 8996 hscb->control = 0; 8997 8998 /* 8999 * This request sense could be because the 9000 * the device lost power or in some other 9001 * way has lost our transfer negotiations. 9002 * Renegotiate if appropriate. Unit attention 9003 * errors will be reported before any data 9004 * phases occur. 9005 */ 9006 if (ahd_get_residual(scb) == ahd_get_transfer_length(scb)) { 9007 ahd_update_neg_request(ahd, &devinfo, 9008 tstate, targ_info, 9009 AHD_NEG_IF_NON_ASYNC); 9010 } 9011 if (tstate->auto_negotiate & devinfo.target_mask) { 9012 hscb->control |= MK_MESSAGE; 9013 scb->flags &= 9014 ~(SCB_NEGOTIATE|SCB_ABORT|SCB_DEVICE_RESET); 9015 scb->flags |= SCB_AUTO_NEGOTIATE; 9016 } 9017 hscb->cdb_len = sizeof(*sc); 9018 ahd_setup_data_scb(ahd, scb); 9019 scb->flags |= SCB_SENSE; 9020 ahd_queue_scb(ahd, scb); 9021 break; 9022 } 9023 case SCSI_STATUS_OK: 9024 printk("%s: Interrupted for status of 0???\n", 9025 ahd_name(ahd)); 9026 fallthrough; 9027 default: 9028 ahd_done(ahd, scb); 9029 break; 9030 } 9031 } 9032 9033 static void 9034 ahd_handle_scb_status(struct ahd_softc *ahd, struct scb *scb) 9035 { 9036 if (scb->hscb->shared_data.istatus.scsi_status != 0) { 9037 ahd_handle_scsi_status(ahd, scb); 9038 } else { 9039 ahd_calc_residual(ahd, scb); 9040 ahd_done(ahd, scb); 9041 } 9042 } 9043 9044 /* 9045 * Calculate the residual for a just completed SCB. 9046 */ 9047 static void 9048 ahd_calc_residual(struct ahd_softc *ahd, struct scb *scb) 9049 { 9050 struct hardware_scb *hscb; 9051 struct initiator_status *spkt; 9052 uint32_t sgptr; 9053 uint32_t resid_sgptr; 9054 uint32_t resid; 9055 9056 /* 9057 * 5 cases. 9058 * 1) No residual. 9059 * SG_STATUS_VALID clear in sgptr. 9060 * 2) Transferless command 9061 * 3) Never performed any transfers. 9062 * sgptr has SG_FULL_RESID set. 9063 * 4) No residual but target did not 9064 * save data pointers after the 9065 * last transfer, so sgptr was 9066 * never updated. 9067 * 5) We have a partial residual. 9068 * Use residual_sgptr to determine 9069 * where we are. 9070 */ 9071 9072 hscb = scb->hscb; 9073 sgptr = ahd_le32toh(hscb->sgptr); 9074 if ((sgptr & SG_STATUS_VALID) == 0) 9075 /* Case 1 */ 9076 return; 9077 sgptr &= ~SG_STATUS_VALID; 9078 9079 if ((sgptr & SG_LIST_NULL) != 0) 9080 /* Case 2 */ 9081 return; 9082 9083 /* 9084 * Residual fields are the same in both 9085 * target and initiator status packets, 9086 * so we can always use the initiator fields 9087 * regardless of the role for this SCB. 9088 */ 9089 spkt = &hscb->shared_data.istatus; 9090 resid_sgptr = ahd_le32toh(spkt->residual_sgptr); 9091 if ((sgptr & SG_FULL_RESID) != 0) { 9092 /* Case 3 */ 9093 resid = ahd_get_transfer_length(scb); 9094 } else if ((resid_sgptr & SG_LIST_NULL) != 0) { 9095 /* Case 4 */ 9096 return; 9097 } else if ((resid_sgptr & SG_OVERRUN_RESID) != 0) { 9098 ahd_print_path(ahd, scb); 9099 printk("data overrun detected Tag == 0x%x.\n", 9100 SCB_GET_TAG(scb)); 9101 ahd_freeze_devq(ahd, scb); 9102 ahd_set_transaction_status(scb, CAM_DATA_RUN_ERR); 9103 ahd_freeze_scb(scb); 9104 return; 9105 } else if ((resid_sgptr & ~SG_PTR_MASK) != 0) { 9106 panic("Bogus resid sgptr value 0x%x\n", resid_sgptr); 9107 /* NOTREACHED */ 9108 } else { 9109 struct ahd_dma_seg *sg; 9110 9111 /* 9112 * Remainder of the SG where the transfer 9113 * stopped. 9114 */ 9115 resid = ahd_le32toh(spkt->residual_datacnt) & AHD_SG_LEN_MASK; 9116 sg = ahd_sg_bus_to_virt(ahd, scb, resid_sgptr & SG_PTR_MASK); 9117 9118 /* The residual sg_ptr always points to the next sg */ 9119 sg--; 9120 9121 /* 9122 * Add up the contents of all residual 9123 * SG segments that are after the SG where 9124 * the transfer stopped. 9125 */ 9126 while ((ahd_le32toh(sg->len) & AHD_DMA_LAST_SEG) == 0) { 9127 sg++; 9128 resid += ahd_le32toh(sg->len) & AHD_SG_LEN_MASK; 9129 } 9130 } 9131 if ((scb->flags & SCB_SENSE) == 0) 9132 ahd_set_residual(scb, resid); 9133 else 9134 ahd_set_sense_residual(scb, resid); 9135 9136 #ifdef AHD_DEBUG 9137 if ((ahd_debug & AHD_SHOW_MISC) != 0) { 9138 ahd_print_path(ahd, scb); 9139 printk("Handled %sResidual of %d bytes\n", 9140 (scb->flags & SCB_SENSE) ? "Sense " : "", resid); 9141 } 9142 #endif 9143 } 9144 9145 /******************************* Target Mode **********************************/ 9146 #ifdef AHD_TARGET_MODE 9147 /* 9148 * Add a target mode event to this lun's queue 9149 */ 9150 static void 9151 ahd_queue_lstate_event(struct ahd_softc *ahd, struct ahd_tmode_lstate *lstate, 9152 u_int initiator_id, u_int event_type, u_int event_arg) 9153 { 9154 struct ahd_tmode_event *event; 9155 int pending; 9156 9157 xpt_freeze_devq(lstate->path, /*count*/1); 9158 if (lstate->event_w_idx >= lstate->event_r_idx) 9159 pending = lstate->event_w_idx - lstate->event_r_idx; 9160 else 9161 pending = AHD_TMODE_EVENT_BUFFER_SIZE + 1 9162 - (lstate->event_r_idx - lstate->event_w_idx); 9163 9164 if (event_type == EVENT_TYPE_BUS_RESET 9165 || event_type == MSG_BUS_DEV_RESET) { 9166 /* 9167 * Any earlier events are irrelevant, so reset our buffer. 9168 * This has the effect of allowing us to deal with reset 9169 * floods (an external device holding down the reset line) 9170 * without losing the event that is really interesting. 9171 */ 9172 lstate->event_r_idx = 0; 9173 lstate->event_w_idx = 0; 9174 xpt_release_devq(lstate->path, pending, /*runqueue*/FALSE); 9175 } 9176 9177 if (pending == AHD_TMODE_EVENT_BUFFER_SIZE) { 9178 xpt_print_path(lstate->path); 9179 printk("immediate event %x:%x lost\n", 9180 lstate->event_buffer[lstate->event_r_idx].event_type, 9181 lstate->event_buffer[lstate->event_r_idx].event_arg); 9182 lstate->event_r_idx++; 9183 if (lstate->event_r_idx == AHD_TMODE_EVENT_BUFFER_SIZE) 9184 lstate->event_r_idx = 0; 9185 xpt_release_devq(lstate->path, /*count*/1, /*runqueue*/FALSE); 9186 } 9187 9188 event = &lstate->event_buffer[lstate->event_w_idx]; 9189 event->initiator_id = initiator_id; 9190 event->event_type = event_type; 9191 event->event_arg = event_arg; 9192 lstate->event_w_idx++; 9193 if (lstate->event_w_idx == AHD_TMODE_EVENT_BUFFER_SIZE) 9194 lstate->event_w_idx = 0; 9195 } 9196 9197 /* 9198 * Send any target mode events queued up waiting 9199 * for immediate notify resources. 9200 */ 9201 void 9202 ahd_send_lstate_events(struct ahd_softc *ahd, struct ahd_tmode_lstate *lstate) 9203 { 9204 struct ccb_hdr *ccbh; 9205 struct ccb_immed_notify *inot; 9206 9207 while (lstate->event_r_idx != lstate->event_w_idx 9208 && (ccbh = SLIST_FIRST(&lstate->immed_notifies)) != NULL) { 9209 struct ahd_tmode_event *event; 9210 9211 event = &lstate->event_buffer[lstate->event_r_idx]; 9212 SLIST_REMOVE_HEAD(&lstate->immed_notifies, sim_links.sle); 9213 inot = (struct ccb_immed_notify *)ccbh; 9214 switch (event->event_type) { 9215 case EVENT_TYPE_BUS_RESET: 9216 ccbh->status = CAM_SCSI_BUS_RESET|CAM_DEV_QFRZN; 9217 break; 9218 default: 9219 ccbh->status = CAM_MESSAGE_RECV|CAM_DEV_QFRZN; 9220 inot->message_args[0] = event->event_type; 9221 inot->message_args[1] = event->event_arg; 9222 break; 9223 } 9224 inot->initiator_id = event->initiator_id; 9225 inot->sense_len = 0; 9226 xpt_done((union ccb *)inot); 9227 lstate->event_r_idx++; 9228 if (lstate->event_r_idx == AHD_TMODE_EVENT_BUFFER_SIZE) 9229 lstate->event_r_idx = 0; 9230 } 9231 } 9232 #endif 9233 9234 /******************** Sequencer Program Patching/Download *********************/ 9235 9236 #ifdef AHD_DUMP_SEQ 9237 void 9238 ahd_dumpseq(struct ahd_softc* ahd) 9239 { 9240 int i; 9241 int max_prog; 9242 9243 max_prog = 2048; 9244 9245 ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS|FASTMODE|LOADRAM); 9246 ahd_outw(ahd, PRGMCNT, 0); 9247 for (i = 0; i < max_prog; i++) { 9248 uint8_t ins_bytes[4]; 9249 9250 ahd_insb(ahd, SEQRAM, ins_bytes, 4); 9251 printk("0x%08x\n", ins_bytes[0] << 24 9252 | ins_bytes[1] << 16 9253 | ins_bytes[2] << 8 9254 | ins_bytes[3]); 9255 } 9256 } 9257 #endif 9258 9259 static void 9260 ahd_loadseq(struct ahd_softc *ahd) 9261 { 9262 struct cs cs_table[NUM_CRITICAL_SECTIONS]; 9263 u_int begin_set[NUM_CRITICAL_SECTIONS]; 9264 u_int end_set[NUM_CRITICAL_SECTIONS]; 9265 const struct patch *cur_patch; 9266 u_int cs_count; 9267 u_int cur_cs; 9268 u_int i; 9269 int downloaded; 9270 u_int skip_addr; 9271 u_int sg_prefetch_cnt; 9272 u_int sg_prefetch_cnt_limit; 9273 u_int sg_prefetch_align; 9274 u_int sg_size; 9275 u_int cacheline_mask; 9276 uint8_t download_consts[DOWNLOAD_CONST_COUNT]; 9277 9278 if (bootverbose) 9279 printk("%s: Downloading Sequencer Program...", 9280 ahd_name(ahd)); 9281 9282 #if DOWNLOAD_CONST_COUNT != 8 9283 #error "Download Const Mismatch" 9284 #endif 9285 /* 9286 * Start out with 0 critical sections 9287 * that apply to this firmware load. 9288 */ 9289 cs_count = 0; 9290 cur_cs = 0; 9291 memset(begin_set, 0, sizeof(begin_set)); 9292 memset(end_set, 0, sizeof(end_set)); 9293 9294 /* 9295 * Setup downloadable constant table. 9296 * 9297 * The computation for the S/G prefetch variables is 9298 * a bit complicated. We would like to always fetch 9299 * in terms of cachelined sized increments. However, 9300 * if the cacheline is not an even multiple of the 9301 * SG element size or is larger than our SG RAM, using 9302 * just the cache size might leave us with only a portion 9303 * of an SG element at the tail of a prefetch. If the 9304 * cacheline is larger than our S/G prefetch buffer less 9305 * the size of an SG element, we may round down to a cacheline 9306 * that doesn't contain any or all of the S/G of interest 9307 * within the bounds of our S/G ram. Provide variables to 9308 * the sequencer that will allow it to handle these edge 9309 * cases. 9310 */ 9311 /* Start by aligning to the nearest cacheline. */ 9312 sg_prefetch_align = ahd->pci_cachesize; 9313 if (sg_prefetch_align == 0) 9314 sg_prefetch_align = 8; 9315 /* Round down to the nearest power of 2. */ 9316 while (powerof2(sg_prefetch_align) == 0) 9317 sg_prefetch_align--; 9318 9319 cacheline_mask = sg_prefetch_align - 1; 9320 9321 /* 9322 * If the cacheline boundary is greater than half our prefetch RAM 9323 * we risk not being able to fetch even a single complete S/G 9324 * segment if we align to that boundary. 9325 */ 9326 if (sg_prefetch_align > CCSGADDR_MAX/2) 9327 sg_prefetch_align = CCSGADDR_MAX/2; 9328 /* Start by fetching a single cacheline. */ 9329 sg_prefetch_cnt = sg_prefetch_align; 9330 /* 9331 * Increment the prefetch count by cachelines until 9332 * at least one S/G element will fit. 9333 */ 9334 sg_size = sizeof(struct ahd_dma_seg); 9335 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) 9336 sg_size = sizeof(struct ahd_dma64_seg); 9337 while (sg_prefetch_cnt < sg_size) 9338 sg_prefetch_cnt += sg_prefetch_align; 9339 /* 9340 * If the cacheline is not an even multiple of 9341 * the S/G size, we may only get a partial S/G when 9342 * we align. Add a cacheline if this is the case. 9343 */ 9344 if ((sg_prefetch_align % sg_size) != 0 9345 && (sg_prefetch_cnt < CCSGADDR_MAX)) 9346 sg_prefetch_cnt += sg_prefetch_align; 9347 /* 9348 * Lastly, compute a value that the sequencer can use 9349 * to determine if the remainder of the CCSGRAM buffer 9350 * has a full S/G element in it. 9351 */ 9352 sg_prefetch_cnt_limit = -(sg_prefetch_cnt - sg_size + 1); 9353 download_consts[SG_PREFETCH_CNT] = sg_prefetch_cnt; 9354 download_consts[SG_PREFETCH_CNT_LIMIT] = sg_prefetch_cnt_limit; 9355 download_consts[SG_PREFETCH_ALIGN_MASK] = ~(sg_prefetch_align - 1); 9356 download_consts[SG_PREFETCH_ADDR_MASK] = (sg_prefetch_align - 1); 9357 download_consts[SG_SIZEOF] = sg_size; 9358 download_consts[PKT_OVERRUN_BUFOFFSET] = 9359 (ahd->overrun_buf - (uint8_t *)ahd->qoutfifo) / 256; 9360 download_consts[SCB_TRANSFER_SIZE] = SCB_TRANSFER_SIZE_1BYTE_LUN; 9361 download_consts[CACHELINE_MASK] = cacheline_mask; 9362 cur_patch = patches; 9363 downloaded = 0; 9364 skip_addr = 0; 9365 ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS|FASTMODE|LOADRAM); 9366 ahd_outw(ahd, PRGMCNT, 0); 9367 9368 for (i = 0; i < sizeof(seqprog)/4; i++) { 9369 if (ahd_check_patch(ahd, &cur_patch, i, &skip_addr) == 0) { 9370 /* 9371 * Don't download this instruction as it 9372 * is in a patch that was removed. 9373 */ 9374 continue; 9375 } 9376 /* 9377 * Move through the CS table until we find a CS 9378 * that might apply to this instruction. 9379 */ 9380 for (; cur_cs < NUM_CRITICAL_SECTIONS; cur_cs++) { 9381 if (critical_sections[cur_cs].end <= i) { 9382 if (begin_set[cs_count] == TRUE 9383 && end_set[cs_count] == FALSE) { 9384 cs_table[cs_count].end = downloaded; 9385 end_set[cs_count] = TRUE; 9386 cs_count++; 9387 } 9388 continue; 9389 } 9390 if (critical_sections[cur_cs].begin <= i 9391 && begin_set[cs_count] == FALSE) { 9392 cs_table[cs_count].begin = downloaded; 9393 begin_set[cs_count] = TRUE; 9394 } 9395 break; 9396 } 9397 ahd_download_instr(ahd, i, download_consts); 9398 downloaded++; 9399 } 9400 9401 ahd->num_critical_sections = cs_count; 9402 if (cs_count != 0) { 9403 9404 cs_count *= sizeof(struct cs); 9405 ahd->critical_sections = kmemdup(cs_table, cs_count, GFP_ATOMIC); 9406 if (ahd->critical_sections == NULL) 9407 panic("ahd_loadseq: Could not malloc"); 9408 } 9409 ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS|FASTMODE); 9410 9411 if (bootverbose) { 9412 printk(" %d instructions downloaded\n", downloaded); 9413 printk("%s: Features 0x%x, Bugs 0x%x, Flags 0x%x\n", 9414 ahd_name(ahd), ahd->features, ahd->bugs, ahd->flags); 9415 } 9416 } 9417 9418 static int 9419 ahd_check_patch(struct ahd_softc *ahd, const struct patch **start_patch, 9420 u_int start_instr, u_int *skip_addr) 9421 { 9422 const struct patch *cur_patch; 9423 const struct patch *last_patch; 9424 u_int num_patches; 9425 9426 num_patches = ARRAY_SIZE(patches); 9427 last_patch = &patches[num_patches]; 9428 cur_patch = *start_patch; 9429 9430 while (cur_patch < last_patch && start_instr == cur_patch->begin) { 9431 9432 if (cur_patch->patch_func(ahd) == 0) { 9433 9434 /* Start rejecting code */ 9435 *skip_addr = start_instr + cur_patch->skip_instr; 9436 cur_patch += cur_patch->skip_patch; 9437 } else { 9438 /* Accepted this patch. Advance to the next 9439 * one and wait for our intruction pointer to 9440 * hit this point. 9441 */ 9442 cur_patch++; 9443 } 9444 } 9445 9446 *start_patch = cur_patch; 9447 if (start_instr < *skip_addr) 9448 /* Still skipping */ 9449 return (0); 9450 9451 return (1); 9452 } 9453 9454 static u_int 9455 ahd_resolve_seqaddr(struct ahd_softc *ahd, u_int address) 9456 { 9457 const struct patch *cur_patch; 9458 int address_offset; 9459 u_int skip_addr; 9460 u_int i; 9461 9462 address_offset = 0; 9463 cur_patch = patches; 9464 skip_addr = 0; 9465 9466 for (i = 0; i < address;) { 9467 9468 ahd_check_patch(ahd, &cur_patch, i, &skip_addr); 9469 9470 if (skip_addr > i) { 9471 int end_addr; 9472 9473 end_addr = min(address, skip_addr); 9474 address_offset += end_addr - i; 9475 i = skip_addr; 9476 } else { 9477 i++; 9478 } 9479 } 9480 return (address - address_offset); 9481 } 9482 9483 static void 9484 ahd_download_instr(struct ahd_softc *ahd, u_int instrptr, uint8_t *dconsts) 9485 { 9486 union ins_formats instr; 9487 struct ins_format1 *fmt1_ins; 9488 struct ins_format3 *fmt3_ins; 9489 u_int opcode; 9490 9491 /* 9492 * The firmware is always compiled into a little endian format. 9493 */ 9494 instr.integer = ahd_le32toh(*(uint32_t*)&seqprog[instrptr * 4]); 9495 9496 fmt1_ins = &instr.format1; 9497 fmt3_ins = NULL; 9498 9499 /* Pull the opcode */ 9500 opcode = instr.format1.opcode; 9501 switch (opcode) { 9502 case AIC_OP_JMP: 9503 case AIC_OP_JC: 9504 case AIC_OP_JNC: 9505 case AIC_OP_CALL: 9506 case AIC_OP_JNE: 9507 case AIC_OP_JNZ: 9508 case AIC_OP_JE: 9509 case AIC_OP_JZ: 9510 { 9511 fmt3_ins = &instr.format3; 9512 fmt3_ins->address = ahd_resolve_seqaddr(ahd, fmt3_ins->address); 9513 } 9514 fallthrough; 9515 case AIC_OP_OR: 9516 case AIC_OP_AND: 9517 case AIC_OP_XOR: 9518 case AIC_OP_ADD: 9519 case AIC_OP_ADC: 9520 case AIC_OP_BMOV: 9521 if (fmt1_ins->parity != 0) { 9522 fmt1_ins->immediate = dconsts[fmt1_ins->immediate]; 9523 } 9524 fmt1_ins->parity = 0; 9525 fallthrough; 9526 case AIC_OP_ROL: 9527 { 9528 int i, count; 9529 9530 /* Calculate odd parity for the instruction */ 9531 for (i = 0, count = 0; i < 31; i++) { 9532 uint32_t mask; 9533 9534 mask = 0x01 << i; 9535 if ((instr.integer & mask) != 0) 9536 count++; 9537 } 9538 if ((count & 0x01) == 0) 9539 instr.format1.parity = 1; 9540 9541 /* The sequencer is a little endian cpu */ 9542 instr.integer = ahd_htole32(instr.integer); 9543 ahd_outsb(ahd, SEQRAM, instr.bytes, 4); 9544 break; 9545 } 9546 default: 9547 panic("Unknown opcode encountered in seq program"); 9548 break; 9549 } 9550 } 9551 9552 static int 9553 ahd_probe_stack_size(struct ahd_softc *ahd) 9554 { 9555 int last_probe; 9556 9557 last_probe = 0; 9558 while (1) { 9559 int i; 9560 9561 /* 9562 * We avoid using 0 as a pattern to avoid 9563 * confusion if the stack implementation 9564 * "back-fills" with zeros when "poping' 9565 * entries. 9566 */ 9567 for (i = 1; i <= last_probe+1; i++) { 9568 ahd_outb(ahd, STACK, i & 0xFF); 9569 ahd_outb(ahd, STACK, (i >> 8) & 0xFF); 9570 } 9571 9572 /* Verify */ 9573 for (i = last_probe+1; i > 0; i--) { 9574 u_int stack_entry; 9575 9576 stack_entry = ahd_inb(ahd, STACK) 9577 |(ahd_inb(ahd, STACK) << 8); 9578 if (stack_entry != i) 9579 goto sized; 9580 } 9581 last_probe++; 9582 } 9583 sized: 9584 return (last_probe); 9585 } 9586 9587 int 9588 ahd_print_register(const ahd_reg_parse_entry_t *table, u_int num_entries, 9589 const char *name, u_int address, u_int value, 9590 u_int *cur_column, u_int wrap_point) 9591 { 9592 int printed; 9593 u_int printed_mask; 9594 9595 if (cur_column != NULL && *cur_column >= wrap_point) { 9596 printk("\n"); 9597 *cur_column = 0; 9598 } 9599 printed = printk("%s[0x%x]", name, value); 9600 if (table == NULL) { 9601 printed += printk(" "); 9602 *cur_column += printed; 9603 return (printed); 9604 } 9605 printed_mask = 0; 9606 while (printed_mask != 0xFF) { 9607 int entry; 9608 9609 for (entry = 0; entry < num_entries; entry++) { 9610 if (((value & table[entry].mask) 9611 != table[entry].value) 9612 || ((printed_mask & table[entry].mask) 9613 == table[entry].mask)) 9614 continue; 9615 9616 printed += printk("%s%s", 9617 printed_mask == 0 ? ":(" : "|", 9618 table[entry].name); 9619 printed_mask |= table[entry].mask; 9620 9621 break; 9622 } 9623 if (entry >= num_entries) 9624 break; 9625 } 9626 if (printed_mask != 0) 9627 printed += printk(") "); 9628 else 9629 printed += printk(" "); 9630 if (cur_column != NULL) 9631 *cur_column += printed; 9632 return (printed); 9633 } 9634 9635 void 9636 ahd_dump_card_state(struct ahd_softc *ahd) 9637 { 9638 struct scb *scb; 9639 ahd_mode_state saved_modes; 9640 u_int dffstat; 9641 int paused; 9642 u_int scb_index; 9643 u_int saved_scb_index; 9644 u_int cur_col; 9645 int i; 9646 9647 if (ahd_is_paused(ahd)) { 9648 paused = 1; 9649 } else { 9650 paused = 0; 9651 ahd_pause(ahd); 9652 } 9653 saved_modes = ahd_save_modes(ahd); 9654 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 9655 printk(">>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<\n" 9656 "%s: Dumping Card State at program address 0x%x Mode 0x%x\n", 9657 ahd_name(ahd), 9658 ahd_inw(ahd, CURADDR), 9659 ahd_build_mode_state(ahd, ahd->saved_src_mode, 9660 ahd->saved_dst_mode)); 9661 if (paused) 9662 printk("Card was paused\n"); 9663 9664 if (ahd_check_cmdcmpltqueues(ahd)) 9665 printk("Completions are pending\n"); 9666 9667 /* 9668 * Mode independent registers. 9669 */ 9670 cur_col = 0; 9671 ahd_intstat_print(ahd_inb(ahd, INTSTAT), &cur_col, 50); 9672 ahd_seloid_print(ahd_inb(ahd, SELOID), &cur_col, 50); 9673 ahd_selid_print(ahd_inb(ahd, SELID), &cur_col, 50); 9674 ahd_hs_mailbox_print(ahd_inb(ahd, LOCAL_HS_MAILBOX), &cur_col, 50); 9675 ahd_intctl_print(ahd_inb(ahd, INTCTL), &cur_col, 50); 9676 ahd_seqintstat_print(ahd_inb(ahd, SEQINTSTAT), &cur_col, 50); 9677 ahd_saved_mode_print(ahd_inb(ahd, SAVED_MODE), &cur_col, 50); 9678 ahd_dffstat_print(ahd_inb(ahd, DFFSTAT), &cur_col, 50); 9679 ahd_scsisigi_print(ahd_inb(ahd, SCSISIGI), &cur_col, 50); 9680 ahd_scsiphase_print(ahd_inb(ahd, SCSIPHASE), &cur_col, 50); 9681 ahd_scsibus_print(ahd_inb(ahd, SCSIBUS), &cur_col, 50); 9682 ahd_lastphase_print(ahd_inb(ahd, LASTPHASE), &cur_col, 50); 9683 ahd_scsiseq0_print(ahd_inb(ahd, SCSISEQ0), &cur_col, 50); 9684 ahd_scsiseq1_print(ahd_inb(ahd, SCSISEQ1), &cur_col, 50); 9685 ahd_seqctl0_print(ahd_inb(ahd, SEQCTL0), &cur_col, 50); 9686 ahd_seqintctl_print(ahd_inb(ahd, SEQINTCTL), &cur_col, 50); 9687 ahd_seq_flags_print(ahd_inb(ahd, SEQ_FLAGS), &cur_col, 50); 9688 ahd_seq_flags2_print(ahd_inb(ahd, SEQ_FLAGS2), &cur_col, 50); 9689 ahd_qfreeze_count_print(ahd_inw(ahd, QFREEZE_COUNT), &cur_col, 50); 9690 ahd_kernel_qfreeze_count_print(ahd_inw(ahd, KERNEL_QFREEZE_COUNT), 9691 &cur_col, 50); 9692 ahd_mk_message_scb_print(ahd_inw(ahd, MK_MESSAGE_SCB), &cur_col, 50); 9693 ahd_mk_message_scsiid_print(ahd_inb(ahd, MK_MESSAGE_SCSIID), 9694 &cur_col, 50); 9695 ahd_sstat0_print(ahd_inb(ahd, SSTAT0), &cur_col, 50); 9696 ahd_sstat1_print(ahd_inb(ahd, SSTAT1), &cur_col, 50); 9697 ahd_sstat2_print(ahd_inb(ahd, SSTAT2), &cur_col, 50); 9698 ahd_sstat3_print(ahd_inb(ahd, SSTAT3), &cur_col, 50); 9699 ahd_perrdiag_print(ahd_inb(ahd, PERRDIAG), &cur_col, 50); 9700 ahd_simode1_print(ahd_inb(ahd, SIMODE1), &cur_col, 50); 9701 ahd_lqistat0_print(ahd_inb(ahd, LQISTAT0), &cur_col, 50); 9702 ahd_lqistat1_print(ahd_inb(ahd, LQISTAT1), &cur_col, 50); 9703 ahd_lqistat2_print(ahd_inb(ahd, LQISTAT2), &cur_col, 50); 9704 ahd_lqostat0_print(ahd_inb(ahd, LQOSTAT0), &cur_col, 50); 9705 ahd_lqostat1_print(ahd_inb(ahd, LQOSTAT1), &cur_col, 50); 9706 ahd_lqostat2_print(ahd_inb(ahd, LQOSTAT2), &cur_col, 50); 9707 printk("\n"); 9708 printk("\nSCB Count = %d CMDS_PENDING = %d LASTSCB 0x%x " 9709 "CURRSCB 0x%x NEXTSCB 0x%x\n", 9710 ahd->scb_data.numscbs, ahd_inw(ahd, CMDS_PENDING), 9711 ahd_inw(ahd, LASTSCB), ahd_inw(ahd, CURRSCB), 9712 ahd_inw(ahd, NEXTSCB)); 9713 cur_col = 0; 9714 /* QINFIFO */ 9715 ahd_search_qinfifo(ahd, CAM_TARGET_WILDCARD, ALL_CHANNELS, 9716 CAM_LUN_WILDCARD, SCB_LIST_NULL, 9717 ROLE_UNKNOWN, /*status*/0, SEARCH_PRINT); 9718 saved_scb_index = ahd_get_scbptr(ahd); 9719 printk("Pending list:"); 9720 i = 0; 9721 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) { 9722 if (i++ > AHD_SCB_MAX) 9723 break; 9724 cur_col = printk("\n%3d FIFO_USE[0x%x] ", SCB_GET_TAG(scb), 9725 ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT)); 9726 ahd_set_scbptr(ahd, SCB_GET_TAG(scb)); 9727 ahd_scb_control_print(ahd_inb_scbram(ahd, SCB_CONTROL), 9728 &cur_col, 60); 9729 ahd_scb_scsiid_print(ahd_inb_scbram(ahd, SCB_SCSIID), 9730 &cur_col, 60); 9731 } 9732 printk("\nTotal %d\n", i); 9733 9734 printk("Kernel Free SCB list: "); 9735 i = 0; 9736 TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) { 9737 struct scb *list_scb; 9738 9739 list_scb = scb; 9740 do { 9741 printk("%d ", SCB_GET_TAG(list_scb)); 9742 list_scb = LIST_NEXT(list_scb, collision_links); 9743 } while (list_scb && i++ < AHD_SCB_MAX); 9744 } 9745 9746 LIST_FOREACH(scb, &ahd->scb_data.any_dev_free_scb_list, links.le) { 9747 if (i++ > AHD_SCB_MAX) 9748 break; 9749 printk("%d ", SCB_GET_TAG(scb)); 9750 } 9751 printk("\n"); 9752 9753 printk("Sequencer Complete DMA-inprog list: "); 9754 scb_index = ahd_inw(ahd, COMPLETE_SCB_DMAINPROG_HEAD); 9755 i = 0; 9756 while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) { 9757 ahd_set_scbptr(ahd, scb_index); 9758 printk("%d ", scb_index); 9759 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 9760 } 9761 printk("\n"); 9762 9763 printk("Sequencer Complete list: "); 9764 scb_index = ahd_inw(ahd, COMPLETE_SCB_HEAD); 9765 i = 0; 9766 while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) { 9767 ahd_set_scbptr(ahd, scb_index); 9768 printk("%d ", scb_index); 9769 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 9770 } 9771 printk("\n"); 9772 9773 9774 printk("Sequencer DMA-Up and Complete list: "); 9775 scb_index = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD); 9776 i = 0; 9777 while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) { 9778 ahd_set_scbptr(ahd, scb_index); 9779 printk("%d ", scb_index); 9780 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 9781 } 9782 printk("\n"); 9783 printk("Sequencer On QFreeze and Complete list: "); 9784 scb_index = ahd_inw(ahd, COMPLETE_ON_QFREEZE_HEAD); 9785 i = 0; 9786 while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) { 9787 ahd_set_scbptr(ahd, scb_index); 9788 printk("%d ", scb_index); 9789 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 9790 } 9791 printk("\n"); 9792 ahd_set_scbptr(ahd, saved_scb_index); 9793 dffstat = ahd_inb(ahd, DFFSTAT); 9794 for (i = 0; i < 2; i++) { 9795 #ifdef AHD_DEBUG 9796 struct scb *fifo_scb; 9797 #endif 9798 u_int fifo_scbptr; 9799 9800 ahd_set_modes(ahd, AHD_MODE_DFF0 + i, AHD_MODE_DFF0 + i); 9801 fifo_scbptr = ahd_get_scbptr(ahd); 9802 printk("\n\n%s: FIFO%d %s, LONGJMP == 0x%x, SCB 0x%x\n", 9803 ahd_name(ahd), i, 9804 (dffstat & (FIFO0FREE << i)) ? "Free" : "Active", 9805 ahd_inw(ahd, LONGJMP_ADDR), fifo_scbptr); 9806 cur_col = 0; 9807 ahd_seqimode_print(ahd_inb(ahd, SEQIMODE), &cur_col, 50); 9808 ahd_seqintsrc_print(ahd_inb(ahd, SEQINTSRC), &cur_col, 50); 9809 ahd_dfcntrl_print(ahd_inb(ahd, DFCNTRL), &cur_col, 50); 9810 ahd_dfstatus_print(ahd_inb(ahd, DFSTATUS), &cur_col, 50); 9811 ahd_sg_cache_shadow_print(ahd_inb(ahd, SG_CACHE_SHADOW), 9812 &cur_col, 50); 9813 ahd_sg_state_print(ahd_inb(ahd, SG_STATE), &cur_col, 50); 9814 ahd_dffsxfrctl_print(ahd_inb(ahd, DFFSXFRCTL), &cur_col, 50); 9815 ahd_soffcnt_print(ahd_inb(ahd, SOFFCNT), &cur_col, 50); 9816 ahd_mdffstat_print(ahd_inb(ahd, MDFFSTAT), &cur_col, 50); 9817 if (cur_col > 50) { 9818 printk("\n"); 9819 cur_col = 0; 9820 } 9821 cur_col += printk("SHADDR = 0x%x%x, SHCNT = 0x%x ", 9822 ahd_inl(ahd, SHADDR+4), 9823 ahd_inl(ahd, SHADDR), 9824 (ahd_inb(ahd, SHCNT) 9825 | (ahd_inb(ahd, SHCNT + 1) << 8) 9826 | (ahd_inb(ahd, SHCNT + 2) << 16))); 9827 if (cur_col > 50) { 9828 printk("\n"); 9829 cur_col = 0; 9830 } 9831 cur_col += printk("HADDR = 0x%x%x, HCNT = 0x%x ", 9832 ahd_inl(ahd, HADDR+4), 9833 ahd_inl(ahd, HADDR), 9834 (ahd_inb(ahd, HCNT) 9835 | (ahd_inb(ahd, HCNT + 1) << 8) 9836 | (ahd_inb(ahd, HCNT + 2) << 16))); 9837 ahd_ccsgctl_print(ahd_inb(ahd, CCSGCTL), &cur_col, 50); 9838 #ifdef AHD_DEBUG 9839 if ((ahd_debug & AHD_SHOW_SG) != 0) { 9840 fifo_scb = ahd_lookup_scb(ahd, fifo_scbptr); 9841 if (fifo_scb != NULL) 9842 ahd_dump_sglist(fifo_scb); 9843 } 9844 #endif 9845 } 9846 printk("\nLQIN: "); 9847 for (i = 0; i < 20; i++) 9848 printk("0x%x ", ahd_inb(ahd, LQIN + i)); 9849 printk("\n"); 9850 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 9851 printk("%s: LQISTATE = 0x%x, LQOSTATE = 0x%x, OPTIONMODE = 0x%x\n", 9852 ahd_name(ahd), ahd_inb(ahd, LQISTATE), ahd_inb(ahd, LQOSTATE), 9853 ahd_inb(ahd, OPTIONMODE)); 9854 printk("%s: OS_SPACE_CNT = 0x%x MAXCMDCNT = 0x%x\n", 9855 ahd_name(ahd), ahd_inb(ahd, OS_SPACE_CNT), 9856 ahd_inb(ahd, MAXCMDCNT)); 9857 printk("%s: SAVED_SCSIID = 0x%x SAVED_LUN = 0x%x\n", 9858 ahd_name(ahd), ahd_inb(ahd, SAVED_SCSIID), 9859 ahd_inb(ahd, SAVED_LUN)); 9860 ahd_simode0_print(ahd_inb(ahd, SIMODE0), &cur_col, 50); 9861 printk("\n"); 9862 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 9863 cur_col = 0; 9864 ahd_ccscbctl_print(ahd_inb(ahd, CCSCBCTL), &cur_col, 50); 9865 printk("\n"); 9866 ahd_set_modes(ahd, ahd->saved_src_mode, ahd->saved_dst_mode); 9867 printk("%s: REG0 == 0x%x, SINDEX = 0x%x, DINDEX = 0x%x\n", 9868 ahd_name(ahd), ahd_inw(ahd, REG0), ahd_inw(ahd, SINDEX), 9869 ahd_inw(ahd, DINDEX)); 9870 printk("%s: SCBPTR == 0x%x, SCB_NEXT == 0x%x, SCB_NEXT2 == 0x%x\n", 9871 ahd_name(ahd), ahd_get_scbptr(ahd), 9872 ahd_inw_scbram(ahd, SCB_NEXT), 9873 ahd_inw_scbram(ahd, SCB_NEXT2)); 9874 printk("CDB %x %x %x %x %x %x\n", 9875 ahd_inb_scbram(ahd, SCB_CDB_STORE), 9876 ahd_inb_scbram(ahd, SCB_CDB_STORE+1), 9877 ahd_inb_scbram(ahd, SCB_CDB_STORE+2), 9878 ahd_inb_scbram(ahd, SCB_CDB_STORE+3), 9879 ahd_inb_scbram(ahd, SCB_CDB_STORE+4), 9880 ahd_inb_scbram(ahd, SCB_CDB_STORE+5)); 9881 printk("STACK:"); 9882 for (i = 0; i < ahd->stack_size; i++) { 9883 ahd->saved_stack[i] = 9884 ahd_inb(ahd, STACK)|(ahd_inb(ahd, STACK) << 8); 9885 printk(" 0x%x", ahd->saved_stack[i]); 9886 } 9887 for (i = ahd->stack_size-1; i >= 0; i--) { 9888 ahd_outb(ahd, STACK, ahd->saved_stack[i] & 0xFF); 9889 ahd_outb(ahd, STACK, (ahd->saved_stack[i] >> 8) & 0xFF); 9890 } 9891 printk("\n<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>\n"); 9892 ahd_restore_modes(ahd, saved_modes); 9893 if (paused == 0) 9894 ahd_unpause(ahd); 9895 } 9896 9897 #if 0 9898 void 9899 ahd_dump_scbs(struct ahd_softc *ahd) 9900 { 9901 ahd_mode_state saved_modes; 9902 u_int saved_scb_index; 9903 int i; 9904 9905 saved_modes = ahd_save_modes(ahd); 9906 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 9907 saved_scb_index = ahd_get_scbptr(ahd); 9908 for (i = 0; i < AHD_SCB_MAX; i++) { 9909 ahd_set_scbptr(ahd, i); 9910 printk("%3d", i); 9911 printk("(CTRL 0x%x ID 0x%x N 0x%x N2 0x%x SG 0x%x, RSG 0x%x)\n", 9912 ahd_inb_scbram(ahd, SCB_CONTROL), 9913 ahd_inb_scbram(ahd, SCB_SCSIID), 9914 ahd_inw_scbram(ahd, SCB_NEXT), 9915 ahd_inw_scbram(ahd, SCB_NEXT2), 9916 ahd_inl_scbram(ahd, SCB_SGPTR), 9917 ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR)); 9918 } 9919 printk("\n"); 9920 ahd_set_scbptr(ahd, saved_scb_index); 9921 ahd_restore_modes(ahd, saved_modes); 9922 } 9923 #endif /* 0 */ 9924 9925 /**************************** Flexport Logic **********************************/ 9926 /* 9927 * Read count 16bit words from 16bit word address start_addr from the 9928 * SEEPROM attached to the controller, into buf, using the controller's 9929 * SEEPROM reading state machine. Optionally treat the data as a byte 9930 * stream in terms of byte order. 9931 */ 9932 int 9933 ahd_read_seeprom(struct ahd_softc *ahd, uint16_t *buf, 9934 u_int start_addr, u_int count, int bytestream) 9935 { 9936 u_int cur_addr; 9937 u_int end_addr; 9938 int error; 9939 9940 /* 9941 * If we never make it through the loop even once, 9942 * we were passed invalid arguments. 9943 */ 9944 error = EINVAL; 9945 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 9946 end_addr = start_addr + count; 9947 for (cur_addr = start_addr; cur_addr < end_addr; cur_addr++) { 9948 9949 ahd_outb(ahd, SEEADR, cur_addr); 9950 ahd_outb(ahd, SEECTL, SEEOP_READ | SEESTART); 9951 9952 error = ahd_wait_seeprom(ahd); 9953 if (error) 9954 break; 9955 if (bytestream != 0) { 9956 uint8_t *bytestream_ptr; 9957 9958 bytestream_ptr = (uint8_t *)buf; 9959 *bytestream_ptr++ = ahd_inb(ahd, SEEDAT); 9960 *bytestream_ptr = ahd_inb(ahd, SEEDAT+1); 9961 } else { 9962 /* 9963 * ahd_inw() already handles machine byte order. 9964 */ 9965 *buf = ahd_inw(ahd, SEEDAT); 9966 } 9967 buf++; 9968 } 9969 return (error); 9970 } 9971 9972 /* 9973 * Write count 16bit words from buf, into SEEPROM attache to the 9974 * controller starting at 16bit word address start_addr, using the 9975 * controller's SEEPROM writing state machine. 9976 */ 9977 int 9978 ahd_write_seeprom(struct ahd_softc *ahd, uint16_t *buf, 9979 u_int start_addr, u_int count) 9980 { 9981 u_int cur_addr; 9982 u_int end_addr; 9983 int error; 9984 int retval; 9985 9986 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 9987 error = ENOENT; 9988 9989 /* Place the chip into write-enable mode */ 9990 ahd_outb(ahd, SEEADR, SEEOP_EWEN_ADDR); 9991 ahd_outb(ahd, SEECTL, SEEOP_EWEN | SEESTART); 9992 error = ahd_wait_seeprom(ahd); 9993 if (error) 9994 return (error); 9995 9996 /* 9997 * Write the data. If we don't get through the loop at 9998 * least once, the arguments were invalid. 9999 */ 10000 retval = EINVAL; 10001 end_addr = start_addr + count; 10002 for (cur_addr = start_addr; cur_addr < end_addr; cur_addr++) { 10003 ahd_outw(ahd, SEEDAT, *buf++); 10004 ahd_outb(ahd, SEEADR, cur_addr); 10005 ahd_outb(ahd, SEECTL, SEEOP_WRITE | SEESTART); 10006 10007 retval = ahd_wait_seeprom(ahd); 10008 if (retval) 10009 break; 10010 } 10011 10012 /* 10013 * Disable writes. 10014 */ 10015 ahd_outb(ahd, SEEADR, SEEOP_EWDS_ADDR); 10016 ahd_outb(ahd, SEECTL, SEEOP_EWDS | SEESTART); 10017 error = ahd_wait_seeprom(ahd); 10018 if (error) 10019 return (error); 10020 return (retval); 10021 } 10022 10023 /* 10024 * Wait ~100us for the serial eeprom to satisfy our request. 10025 */ 10026 static int 10027 ahd_wait_seeprom(struct ahd_softc *ahd) 10028 { 10029 int cnt; 10030 10031 cnt = 5000; 10032 while ((ahd_inb(ahd, SEESTAT) & (SEEARBACK|SEEBUSY)) != 0 && --cnt) 10033 ahd_delay(5); 10034 10035 if (cnt == 0) 10036 return (ETIMEDOUT); 10037 return (0); 10038 } 10039 10040 /* 10041 * Validate the two checksums in the per_channel 10042 * vital product data struct. 10043 */ 10044 static int 10045 ahd_verify_vpd_cksum(struct vpd_config *vpd) 10046 { 10047 int i; 10048 int maxaddr; 10049 uint32_t checksum; 10050 uint8_t *vpdarray; 10051 10052 vpdarray = (uint8_t *)vpd; 10053 maxaddr = offsetof(struct vpd_config, vpd_checksum); 10054 checksum = 0; 10055 for (i = offsetof(struct vpd_config, resource_type); i < maxaddr; i++) 10056 checksum = checksum + vpdarray[i]; 10057 if (checksum == 0 10058 || (-checksum & 0xFF) != vpd->vpd_checksum) 10059 return (0); 10060 10061 checksum = 0; 10062 maxaddr = offsetof(struct vpd_config, checksum); 10063 for (i = offsetof(struct vpd_config, default_target_flags); 10064 i < maxaddr; i++) 10065 checksum = checksum + vpdarray[i]; 10066 if (checksum == 0 10067 || (-checksum & 0xFF) != vpd->checksum) 10068 return (0); 10069 return (1); 10070 } 10071 10072 int 10073 ahd_verify_cksum(struct seeprom_config *sc) 10074 { 10075 int i; 10076 int maxaddr; 10077 uint32_t checksum; 10078 uint16_t *scarray; 10079 10080 maxaddr = (sizeof(*sc)/2) - 1; 10081 checksum = 0; 10082 scarray = (uint16_t *)sc; 10083 10084 for (i = 0; i < maxaddr; i++) 10085 checksum = checksum + scarray[i]; 10086 if (checksum == 0 10087 || (checksum & 0xFFFF) != sc->checksum) { 10088 return (0); 10089 } else { 10090 return (1); 10091 } 10092 } 10093 10094 int 10095 ahd_acquire_seeprom(struct ahd_softc *ahd) 10096 { 10097 /* 10098 * We should be able to determine the SEEPROM type 10099 * from the flexport logic, but unfortunately not 10100 * all implementations have this logic and there is 10101 * no programatic method for determining if the logic 10102 * is present. 10103 */ 10104 return (1); 10105 #if 0 10106 uint8_t seetype; 10107 int error; 10108 10109 error = ahd_read_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL, &seetype); 10110 if (error != 0 10111 || ((seetype & FLX_ROMSTAT_SEECFG) == FLX_ROMSTAT_SEE_NONE)) 10112 return (0); 10113 return (1); 10114 #endif 10115 } 10116 10117 void 10118 ahd_release_seeprom(struct ahd_softc *ahd) 10119 { 10120 /* Currently a no-op */ 10121 } 10122 10123 /* 10124 * Wait at most 2 seconds for flexport arbitration to succeed. 10125 */ 10126 static int 10127 ahd_wait_flexport(struct ahd_softc *ahd) 10128 { 10129 int cnt; 10130 10131 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 10132 cnt = 1000000 * 2 / 5; 10133 while ((ahd_inb(ahd, BRDCTL) & FLXARBACK) == 0 && --cnt) 10134 ahd_delay(5); 10135 10136 if (cnt == 0) 10137 return (ETIMEDOUT); 10138 return (0); 10139 } 10140 10141 int 10142 ahd_write_flexport(struct ahd_softc *ahd, u_int addr, u_int value) 10143 { 10144 int error; 10145 10146 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 10147 if (addr > 7) 10148 panic("ahd_write_flexport: address out of range"); 10149 ahd_outb(ahd, BRDCTL, BRDEN|(addr << 3)); 10150 error = ahd_wait_flexport(ahd); 10151 if (error != 0) 10152 return (error); 10153 ahd_outb(ahd, BRDDAT, value); 10154 ahd_flush_device_writes(ahd); 10155 ahd_outb(ahd, BRDCTL, BRDSTB|BRDEN|(addr << 3)); 10156 ahd_flush_device_writes(ahd); 10157 ahd_outb(ahd, BRDCTL, BRDEN|(addr << 3)); 10158 ahd_flush_device_writes(ahd); 10159 ahd_outb(ahd, BRDCTL, 0); 10160 ahd_flush_device_writes(ahd); 10161 return (0); 10162 } 10163 10164 int 10165 ahd_read_flexport(struct ahd_softc *ahd, u_int addr, uint8_t *value) 10166 { 10167 int error; 10168 10169 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 10170 if (addr > 7) 10171 panic("ahd_read_flexport: address out of range"); 10172 ahd_outb(ahd, BRDCTL, BRDRW|BRDEN|(addr << 3)); 10173 error = ahd_wait_flexport(ahd); 10174 if (error != 0) 10175 return (error); 10176 *value = ahd_inb(ahd, BRDDAT); 10177 ahd_outb(ahd, BRDCTL, 0); 10178 ahd_flush_device_writes(ahd); 10179 return (0); 10180 } 10181 10182 /************************* Target Mode ****************************************/ 10183 #ifdef AHD_TARGET_MODE 10184 cam_status 10185 ahd_find_tmode_devs(struct ahd_softc *ahd, struct cam_sim *sim, union ccb *ccb, 10186 struct ahd_tmode_tstate **tstate, 10187 struct ahd_tmode_lstate **lstate, 10188 int notfound_failure) 10189 { 10190 10191 if ((ahd->features & AHD_TARGETMODE) == 0) 10192 return (CAM_REQ_INVALID); 10193 10194 /* 10195 * Handle the 'black hole' device that sucks up 10196 * requests to unattached luns on enabled targets. 10197 */ 10198 if (ccb->ccb_h.target_id == CAM_TARGET_WILDCARD 10199 && ccb->ccb_h.target_lun == CAM_LUN_WILDCARD) { 10200 *tstate = NULL; 10201 *lstate = ahd->black_hole; 10202 } else { 10203 u_int max_id; 10204 10205 max_id = (ahd->features & AHD_WIDE) ? 16 : 8; 10206 if (ccb->ccb_h.target_id >= max_id) 10207 return (CAM_TID_INVALID); 10208 10209 if (ccb->ccb_h.target_lun >= AHD_NUM_LUNS) 10210 return (CAM_LUN_INVALID); 10211 10212 *tstate = ahd->enabled_targets[ccb->ccb_h.target_id]; 10213 *lstate = NULL; 10214 if (*tstate != NULL) 10215 *lstate = 10216 (*tstate)->enabled_luns[ccb->ccb_h.target_lun]; 10217 } 10218 10219 if (notfound_failure != 0 && *lstate == NULL) 10220 return (CAM_PATH_INVALID); 10221 10222 return (CAM_REQ_CMP); 10223 } 10224 10225 void 10226 ahd_handle_en_lun(struct ahd_softc *ahd, struct cam_sim *sim, union ccb *ccb) 10227 { 10228 #if NOT_YET 10229 struct ahd_tmode_tstate *tstate; 10230 struct ahd_tmode_lstate *lstate; 10231 struct ccb_en_lun *cel; 10232 cam_status status; 10233 u_int target; 10234 u_int lun; 10235 u_int target_mask; 10236 u_long s; 10237 char channel; 10238 10239 status = ahd_find_tmode_devs(ahd, sim, ccb, &tstate, &lstate, 10240 /*notfound_failure*/FALSE); 10241 10242 if (status != CAM_REQ_CMP) { 10243 ccb->ccb_h.status = status; 10244 return; 10245 } 10246 10247 if ((ahd->features & AHD_MULTIROLE) != 0) { 10248 u_int our_id; 10249 10250 our_id = ahd->our_id; 10251 if (ccb->ccb_h.target_id != our_id) { 10252 if ((ahd->features & AHD_MULTI_TID) != 0 10253 && (ahd->flags & AHD_INITIATORROLE) != 0) { 10254 /* 10255 * Only allow additional targets if 10256 * the initiator role is disabled. 10257 * The hardware cannot handle a re-select-in 10258 * on the initiator id during a re-select-out 10259 * on a different target id. 10260 */ 10261 status = CAM_TID_INVALID; 10262 } else if ((ahd->flags & AHD_INITIATORROLE) != 0 10263 || ahd->enabled_luns > 0) { 10264 /* 10265 * Only allow our target id to change 10266 * if the initiator role is not configured 10267 * and there are no enabled luns which 10268 * are attached to the currently registered 10269 * scsi id. 10270 */ 10271 status = CAM_TID_INVALID; 10272 } 10273 } 10274 } 10275 10276 if (status != CAM_REQ_CMP) { 10277 ccb->ccb_h.status = status; 10278 return; 10279 } 10280 10281 /* 10282 * We now have an id that is valid. 10283 * If we aren't in target mode, switch modes. 10284 */ 10285 if ((ahd->flags & AHD_TARGETROLE) == 0 10286 && ccb->ccb_h.target_id != CAM_TARGET_WILDCARD) { 10287 u_long s; 10288 10289 printk("Configuring Target Mode\n"); 10290 ahd_lock(ahd, &s); 10291 if (LIST_FIRST(&ahd->pending_scbs) != NULL) { 10292 ccb->ccb_h.status = CAM_BUSY; 10293 ahd_unlock(ahd, &s); 10294 return; 10295 } 10296 ahd->flags |= AHD_TARGETROLE; 10297 if ((ahd->features & AHD_MULTIROLE) == 0) 10298 ahd->flags &= ~AHD_INITIATORROLE; 10299 ahd_pause(ahd); 10300 ahd_loadseq(ahd); 10301 ahd_restart(ahd); 10302 ahd_unlock(ahd, &s); 10303 } 10304 cel = &ccb->cel; 10305 target = ccb->ccb_h.target_id; 10306 lun = ccb->ccb_h.target_lun; 10307 channel = SIM_CHANNEL(ahd, sim); 10308 target_mask = 0x01 << target; 10309 if (channel == 'B') 10310 target_mask <<= 8; 10311 10312 if (cel->enable != 0) { 10313 u_int scsiseq1; 10314 10315 /* Are we already enabled?? */ 10316 if (lstate != NULL) { 10317 xpt_print_path(ccb->ccb_h.path); 10318 printk("Lun already enabled\n"); 10319 ccb->ccb_h.status = CAM_LUN_ALRDY_ENA; 10320 return; 10321 } 10322 10323 if (cel->grp6_len != 0 10324 || cel->grp7_len != 0) { 10325 /* 10326 * Don't (yet?) support vendor 10327 * specific commands. 10328 */ 10329 ccb->ccb_h.status = CAM_REQ_INVALID; 10330 printk("Non-zero Group Codes\n"); 10331 return; 10332 } 10333 10334 /* 10335 * Seems to be okay. 10336 * Setup our data structures. 10337 */ 10338 if (target != CAM_TARGET_WILDCARD && tstate == NULL) { 10339 tstate = ahd_alloc_tstate(ahd, target, channel); 10340 if (tstate == NULL) { 10341 xpt_print_path(ccb->ccb_h.path); 10342 printk("Couldn't allocate tstate\n"); 10343 ccb->ccb_h.status = CAM_RESRC_UNAVAIL; 10344 return; 10345 } 10346 } 10347 lstate = kzalloc(sizeof(*lstate), GFP_ATOMIC); 10348 if (lstate == NULL) { 10349 xpt_print_path(ccb->ccb_h.path); 10350 printk("Couldn't allocate lstate\n"); 10351 ccb->ccb_h.status = CAM_RESRC_UNAVAIL; 10352 return; 10353 } 10354 status = xpt_create_path(&lstate->path, /*periph*/NULL, 10355 xpt_path_path_id(ccb->ccb_h.path), 10356 xpt_path_target_id(ccb->ccb_h.path), 10357 xpt_path_lun_id(ccb->ccb_h.path)); 10358 if (status != CAM_REQ_CMP) { 10359 kfree(lstate); 10360 xpt_print_path(ccb->ccb_h.path); 10361 printk("Couldn't allocate path\n"); 10362 ccb->ccb_h.status = CAM_RESRC_UNAVAIL; 10363 return; 10364 } 10365 SLIST_INIT(&lstate->accept_tios); 10366 SLIST_INIT(&lstate->immed_notifies); 10367 ahd_lock(ahd, &s); 10368 ahd_pause(ahd); 10369 if (target != CAM_TARGET_WILDCARD) { 10370 tstate->enabled_luns[lun] = lstate; 10371 ahd->enabled_luns++; 10372 10373 if ((ahd->features & AHD_MULTI_TID) != 0) { 10374 u_int targid_mask; 10375 10376 targid_mask = ahd_inw(ahd, TARGID); 10377 targid_mask |= target_mask; 10378 ahd_outw(ahd, TARGID, targid_mask); 10379 ahd_update_scsiid(ahd, targid_mask); 10380 } else { 10381 u_int our_id; 10382 char channel; 10383 10384 channel = SIM_CHANNEL(ahd, sim); 10385 our_id = SIM_SCSI_ID(ahd, sim); 10386 10387 /* 10388 * This can only happen if selections 10389 * are not enabled 10390 */ 10391 if (target != our_id) { 10392 u_int sblkctl; 10393 char cur_channel; 10394 int swap; 10395 10396 sblkctl = ahd_inb(ahd, SBLKCTL); 10397 cur_channel = (sblkctl & SELBUSB) 10398 ? 'B' : 'A'; 10399 if ((ahd->features & AHD_TWIN) == 0) 10400 cur_channel = 'A'; 10401 swap = cur_channel != channel; 10402 ahd->our_id = target; 10403 10404 if (swap) 10405 ahd_outb(ahd, SBLKCTL, 10406 sblkctl ^ SELBUSB); 10407 10408 ahd_outb(ahd, SCSIID, target); 10409 10410 if (swap) 10411 ahd_outb(ahd, SBLKCTL, sblkctl); 10412 } 10413 } 10414 } else 10415 ahd->black_hole = lstate; 10416 /* Allow select-in operations */ 10417 if (ahd->black_hole != NULL && ahd->enabled_luns > 0) { 10418 scsiseq1 = ahd_inb(ahd, SCSISEQ_TEMPLATE); 10419 scsiseq1 |= ENSELI; 10420 ahd_outb(ahd, SCSISEQ_TEMPLATE, scsiseq1); 10421 scsiseq1 = ahd_inb(ahd, SCSISEQ1); 10422 scsiseq1 |= ENSELI; 10423 ahd_outb(ahd, SCSISEQ1, scsiseq1); 10424 } 10425 ahd_unpause(ahd); 10426 ahd_unlock(ahd, &s); 10427 ccb->ccb_h.status = CAM_REQ_CMP; 10428 xpt_print_path(ccb->ccb_h.path); 10429 printk("Lun now enabled for target mode\n"); 10430 } else { 10431 struct scb *scb; 10432 int i, empty; 10433 10434 if (lstate == NULL) { 10435 ccb->ccb_h.status = CAM_LUN_INVALID; 10436 return; 10437 } 10438 10439 ahd_lock(ahd, &s); 10440 10441 ccb->ccb_h.status = CAM_REQ_CMP; 10442 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) { 10443 struct ccb_hdr *ccbh; 10444 10445 ccbh = &scb->io_ctx->ccb_h; 10446 if (ccbh->func_code == XPT_CONT_TARGET_IO 10447 && !xpt_path_comp(ccbh->path, ccb->ccb_h.path)){ 10448 printk("CTIO pending\n"); 10449 ccb->ccb_h.status = CAM_REQ_INVALID; 10450 ahd_unlock(ahd, &s); 10451 return; 10452 } 10453 } 10454 10455 if (SLIST_FIRST(&lstate->accept_tios) != NULL) { 10456 printk("ATIOs pending\n"); 10457 ccb->ccb_h.status = CAM_REQ_INVALID; 10458 } 10459 10460 if (SLIST_FIRST(&lstate->immed_notifies) != NULL) { 10461 printk("INOTs pending\n"); 10462 ccb->ccb_h.status = CAM_REQ_INVALID; 10463 } 10464 10465 if (ccb->ccb_h.status != CAM_REQ_CMP) { 10466 ahd_unlock(ahd, &s); 10467 return; 10468 } 10469 10470 xpt_print_path(ccb->ccb_h.path); 10471 printk("Target mode disabled\n"); 10472 xpt_free_path(lstate->path); 10473 kfree(lstate); 10474 10475 ahd_pause(ahd); 10476 /* Can we clean up the target too? */ 10477 if (target != CAM_TARGET_WILDCARD) { 10478 tstate->enabled_luns[lun] = NULL; 10479 ahd->enabled_luns--; 10480 for (empty = 1, i = 0; i < 8; i++) 10481 if (tstate->enabled_luns[i] != NULL) { 10482 empty = 0; 10483 break; 10484 } 10485 10486 if (empty) { 10487 ahd_free_tstate(ahd, target, channel, 10488 /*force*/FALSE); 10489 if (ahd->features & AHD_MULTI_TID) { 10490 u_int targid_mask; 10491 10492 targid_mask = ahd_inw(ahd, TARGID); 10493 targid_mask &= ~target_mask; 10494 ahd_outw(ahd, TARGID, targid_mask); 10495 ahd_update_scsiid(ahd, targid_mask); 10496 } 10497 } 10498 } else { 10499 10500 ahd->black_hole = NULL; 10501 10502 /* 10503 * We can't allow selections without 10504 * our black hole device. 10505 */ 10506 empty = TRUE; 10507 } 10508 if (ahd->enabled_luns == 0) { 10509 /* Disallow select-in */ 10510 u_int scsiseq1; 10511 10512 scsiseq1 = ahd_inb(ahd, SCSISEQ_TEMPLATE); 10513 scsiseq1 &= ~ENSELI; 10514 ahd_outb(ahd, SCSISEQ_TEMPLATE, scsiseq1); 10515 scsiseq1 = ahd_inb(ahd, SCSISEQ1); 10516 scsiseq1 &= ~ENSELI; 10517 ahd_outb(ahd, SCSISEQ1, scsiseq1); 10518 10519 if ((ahd->features & AHD_MULTIROLE) == 0) { 10520 printk("Configuring Initiator Mode\n"); 10521 ahd->flags &= ~AHD_TARGETROLE; 10522 ahd->flags |= AHD_INITIATORROLE; 10523 ahd_pause(ahd); 10524 ahd_loadseq(ahd); 10525 ahd_restart(ahd); 10526 /* 10527 * Unpaused. The extra unpause 10528 * that follows is harmless. 10529 */ 10530 } 10531 } 10532 ahd_unpause(ahd); 10533 ahd_unlock(ahd, &s); 10534 } 10535 #endif 10536 } 10537 10538 static void 10539 ahd_update_scsiid(struct ahd_softc *ahd, u_int targid_mask) 10540 { 10541 #if NOT_YET 10542 u_int scsiid_mask; 10543 u_int scsiid; 10544 10545 if ((ahd->features & AHD_MULTI_TID) == 0) 10546 panic("ahd_update_scsiid called on non-multitid unit\n"); 10547 10548 /* 10549 * Since we will rely on the TARGID mask 10550 * for selection enables, ensure that OID 10551 * in SCSIID is not set to some other ID 10552 * that we don't want to allow selections on. 10553 */ 10554 if ((ahd->features & AHD_ULTRA2) != 0) 10555 scsiid = ahd_inb(ahd, SCSIID_ULTRA2); 10556 else 10557 scsiid = ahd_inb(ahd, SCSIID); 10558 scsiid_mask = 0x1 << (scsiid & OID); 10559 if ((targid_mask & scsiid_mask) == 0) { 10560 u_int our_id; 10561 10562 /* ffs counts from 1 */ 10563 our_id = ffs(targid_mask); 10564 if (our_id == 0) 10565 our_id = ahd->our_id; 10566 else 10567 our_id--; 10568 scsiid &= TID; 10569 scsiid |= our_id; 10570 } 10571 if ((ahd->features & AHD_ULTRA2) != 0) 10572 ahd_outb(ahd, SCSIID_ULTRA2, scsiid); 10573 else 10574 ahd_outb(ahd, SCSIID, scsiid); 10575 #endif 10576 } 10577 10578 static void 10579 ahd_run_tqinfifo(struct ahd_softc *ahd, int paused) 10580 { 10581 struct target_cmd *cmd; 10582 10583 ahd_sync_tqinfifo(ahd, BUS_DMASYNC_POSTREAD); 10584 while ((cmd = &ahd->targetcmds[ahd->tqinfifonext])->cmd_valid != 0) { 10585 10586 /* 10587 * Only advance through the queue if we 10588 * have the resources to process the command. 10589 */ 10590 if (ahd_handle_target_cmd(ahd, cmd) != 0) 10591 break; 10592 10593 cmd->cmd_valid = 0; 10594 ahd_dmamap_sync(ahd, ahd->shared_data_dmat, 10595 ahd->shared_data_map.dmamap, 10596 ahd_targetcmd_offset(ahd, ahd->tqinfifonext), 10597 sizeof(struct target_cmd), 10598 BUS_DMASYNC_PREREAD); 10599 ahd->tqinfifonext++; 10600 10601 /* 10602 * Lazily update our position in the target mode incoming 10603 * command queue as seen by the sequencer. 10604 */ 10605 if ((ahd->tqinfifonext & (HOST_TQINPOS - 1)) == 1) { 10606 u_int hs_mailbox; 10607 10608 hs_mailbox = ahd_inb(ahd, HS_MAILBOX); 10609 hs_mailbox &= ~HOST_TQINPOS; 10610 hs_mailbox |= ahd->tqinfifonext & HOST_TQINPOS; 10611 ahd_outb(ahd, HS_MAILBOX, hs_mailbox); 10612 } 10613 } 10614 } 10615 10616 static int 10617 ahd_handle_target_cmd(struct ahd_softc *ahd, struct target_cmd *cmd) 10618 { 10619 struct ahd_tmode_tstate *tstate; 10620 struct ahd_tmode_lstate *lstate; 10621 struct ccb_accept_tio *atio; 10622 uint8_t *byte; 10623 int initiator; 10624 int target; 10625 int lun; 10626 10627 initiator = SCSIID_TARGET(ahd, cmd->scsiid); 10628 target = SCSIID_OUR_ID(cmd->scsiid); 10629 lun = (cmd->identify & MSG_IDENTIFY_LUNMASK); 10630 10631 byte = cmd->bytes; 10632 tstate = ahd->enabled_targets[target]; 10633 lstate = NULL; 10634 if (tstate != NULL) 10635 lstate = tstate->enabled_luns[lun]; 10636 10637 /* 10638 * Commands for disabled luns go to the black hole driver. 10639 */ 10640 if (lstate == NULL) 10641 lstate = ahd->black_hole; 10642 10643 atio = (struct ccb_accept_tio*)SLIST_FIRST(&lstate->accept_tios); 10644 if (atio == NULL) { 10645 ahd->flags |= AHD_TQINFIFO_BLOCKED; 10646 /* 10647 * Wait for more ATIOs from the peripheral driver for this lun. 10648 */ 10649 return (1); 10650 } else 10651 ahd->flags &= ~AHD_TQINFIFO_BLOCKED; 10652 #ifdef AHD_DEBUG 10653 if ((ahd_debug & AHD_SHOW_TQIN) != 0) 10654 printk("Incoming command from %d for %d:%d%s\n", 10655 initiator, target, lun, 10656 lstate == ahd->black_hole ? "(Black Holed)" : ""); 10657 #endif 10658 SLIST_REMOVE_HEAD(&lstate->accept_tios, sim_links.sle); 10659 10660 if (lstate == ahd->black_hole) { 10661 /* Fill in the wildcards */ 10662 atio->ccb_h.target_id = target; 10663 atio->ccb_h.target_lun = lun; 10664 } 10665 10666 /* 10667 * Package it up and send it off to 10668 * whomever has this lun enabled. 10669 */ 10670 atio->sense_len = 0; 10671 atio->init_id = initiator; 10672 if (byte[0] != 0xFF) { 10673 /* Tag was included */ 10674 atio->tag_action = *byte++; 10675 atio->tag_id = *byte++; 10676 atio->ccb_h.flags = CAM_TAG_ACTION_VALID; 10677 } else { 10678 atio->ccb_h.flags = 0; 10679 } 10680 byte++; 10681 10682 /* Okay. Now determine the cdb size based on the command code */ 10683 switch (*byte >> CMD_GROUP_CODE_SHIFT) { 10684 case 0: 10685 atio->cdb_len = 6; 10686 break; 10687 case 1: 10688 case 2: 10689 atio->cdb_len = 10; 10690 break; 10691 case 4: 10692 atio->cdb_len = 16; 10693 break; 10694 case 5: 10695 atio->cdb_len = 12; 10696 break; 10697 case 3: 10698 default: 10699 /* Only copy the opcode. */ 10700 atio->cdb_len = 1; 10701 printk("Reserved or VU command code type encountered\n"); 10702 break; 10703 } 10704 10705 memcpy(atio->cdb_io.cdb_bytes, byte, atio->cdb_len); 10706 10707 atio->ccb_h.status |= CAM_CDB_RECVD; 10708 10709 if ((cmd->identify & MSG_IDENTIFY_DISCFLAG) == 0) { 10710 /* 10711 * We weren't allowed to disconnect. 10712 * We're hanging on the bus until a 10713 * continue target I/O comes in response 10714 * to this accept tio. 10715 */ 10716 #ifdef AHD_DEBUG 10717 if ((ahd_debug & AHD_SHOW_TQIN) != 0) 10718 printk("Received Immediate Command %d:%d:%d - %p\n", 10719 initiator, target, lun, ahd->pending_device); 10720 #endif 10721 ahd->pending_device = lstate; 10722 ahd_freeze_ccb((union ccb *)atio); 10723 atio->ccb_h.flags |= CAM_DIS_DISCONNECT; 10724 } 10725 xpt_done((union ccb*)atio); 10726 return (0); 10727 } 10728 10729 #endif 10730