xref: /openbmc/linux/drivers/scsi/aacraid/rx.c (revision 2f164822)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  *	Adaptec AAC series RAID controller driver
4  *	(c) Copyright 2001 Red Hat Inc.
5  *
6  * based on the old aacraid driver that is..
7  * Adaptec aacraid device driver for Linux.
8  *
9  * Copyright (c) 2000-2010 Adaptec, Inc.
10  *               2010-2015 PMC-Sierra, Inc. (aacraid@pmc-sierra.com)
11  *		 2016-2017 Microsemi Corp. (aacraid@microsemi.com)
12  *
13  * Module Name:
14  *  rx.c
15  *
16  * Abstract: Hardware miniport for Drawbridge specific hardware functions.
17  */
18 
19 #include <linux/kernel.h>
20 #include <linux/init.h>
21 #include <linux/types.h>
22 #include <linux/pci.h>
23 #include <linux/spinlock.h>
24 #include <linux/blkdev.h>
25 #include <linux/delay.h>
26 #include <linux/completion.h>
27 #include <linux/time.h>
28 #include <linux/interrupt.h>
29 
30 #include <scsi/scsi_host.h>
31 
32 #include "aacraid.h"
33 
34 static irqreturn_t aac_rx_intr_producer(int irq, void *dev_id)
35 {
36 	struct aac_dev *dev = dev_id;
37 	unsigned long bellbits;
38 	u8 intstat = rx_readb(dev, MUnit.OISR);
39 
40 	/*
41 	 *	Read mask and invert because drawbridge is reversed.
42 	 *	This allows us to only service interrupts that have
43 	 *	been enabled.
44 	 *	Check to see if this is our interrupt.  If it isn't just return
45 	 */
46 	if (likely(intstat & ~(dev->OIMR))) {
47 		bellbits = rx_readl(dev, OutboundDoorbellReg);
48 		if (unlikely(bellbits & DoorBellPrintfReady)) {
49 			aac_printf(dev, readl (&dev->IndexRegs->Mailbox[5]));
50 			rx_writel(dev, MUnit.ODR,DoorBellPrintfReady);
51 			rx_writel(dev, InboundDoorbellReg,DoorBellPrintfDone);
52 		}
53 		else if (unlikely(bellbits & DoorBellAdapterNormCmdReady)) {
54 			rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady);
55 			aac_command_normal(&dev->queues->queue[HostNormCmdQueue]);
56 		}
57 		else if (likely(bellbits & DoorBellAdapterNormRespReady)) {
58 			rx_writel(dev, MUnit.ODR,DoorBellAdapterNormRespReady);
59 			aac_response_normal(&dev->queues->queue[HostNormRespQueue]);
60 		}
61 		else if (unlikely(bellbits & DoorBellAdapterNormCmdNotFull)) {
62 			rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
63 		}
64 		else if (unlikely(bellbits & DoorBellAdapterNormRespNotFull)) {
65 			rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
66 			rx_writel(dev, MUnit.ODR, DoorBellAdapterNormRespNotFull);
67 		}
68 		return IRQ_HANDLED;
69 	}
70 	return IRQ_NONE;
71 }
72 
73 static irqreturn_t aac_rx_intr_message(int irq, void *dev_id)
74 {
75 	int isAif, isFastResponse, isSpecial;
76 	struct aac_dev *dev = dev_id;
77 	u32 Index = rx_readl(dev, MUnit.OutboundQueue);
78 	if (unlikely(Index == 0xFFFFFFFFL))
79 		Index = rx_readl(dev, MUnit.OutboundQueue);
80 	if (likely(Index != 0xFFFFFFFFL)) {
81 		do {
82 			isAif = isFastResponse = isSpecial = 0;
83 			if (Index & 0x00000002L) {
84 				isAif = 1;
85 				if (Index == 0xFFFFFFFEL)
86 					isSpecial = 1;
87 				Index &= ~0x00000002L;
88 			} else {
89 				if (Index & 0x00000001L)
90 					isFastResponse = 1;
91 				Index >>= 2;
92 			}
93 			if (!isSpecial) {
94 				if (unlikely(aac_intr_normal(dev,
95 						Index, isAif,
96 						isFastResponse, NULL))) {
97 					rx_writel(dev,
98 						MUnit.OutboundQueue,
99 						Index);
100 					rx_writel(dev,
101 						MUnit.ODR,
102 						DoorBellAdapterNormRespReady);
103 				}
104 			}
105 			Index = rx_readl(dev, MUnit.OutboundQueue);
106 		} while (Index != 0xFFFFFFFFL);
107 		return IRQ_HANDLED;
108 	}
109 	return IRQ_NONE;
110 }
111 
112 /**
113  *	aac_rx_disable_interrupt	-	Disable interrupts
114  *	@dev: Adapter
115  */
116 
117 static void aac_rx_disable_interrupt(struct aac_dev *dev)
118 {
119 	rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff);
120 }
121 
122 /**
123  *	aac_rx_enable_interrupt_producer	-	Enable interrupts
124  *	@dev: Adapter
125  */
126 
127 static void aac_rx_enable_interrupt_producer(struct aac_dev *dev)
128 {
129 	rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
130 }
131 
132 /**
133  *	aac_rx_enable_interrupt_message	-	Enable interrupts
134  *	@dev: Adapter
135  */
136 
137 static void aac_rx_enable_interrupt_message(struct aac_dev *dev)
138 {
139 	rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7);
140 }
141 
142 /**
143  *	rx_sync_cmd	-	send a command and wait
144  *	@dev: Adapter
145  *	@command: Command to execute
146  *	@p1: first parameter
147  *	@p2: second parameter
148  *	@p3: third parameter
149  *	@p4: forth parameter
150  *	@p5: fifth parameter
151  *	@p6: sixth parameter
152  *	@status: adapter status
153  *	@r1: first return value
154  *	@r2: second return value
155  *	@r3: third return value
156  *	@r4: forth return value
157  *
158  *	This routine will send a synchronous command to the adapter and wait
159  *	for its	completion.
160  */
161 
162 static int rx_sync_cmd(struct aac_dev *dev, u32 command,
163 	u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6,
164 	u32 *status, u32 * r1, u32 * r2, u32 * r3, u32 * r4)
165 {
166 	unsigned long start;
167 	int ok;
168 	/*
169 	 *	Write the command into Mailbox 0
170 	 */
171 	writel(command, &dev->IndexRegs->Mailbox[0]);
172 	/*
173 	 *	Write the parameters into Mailboxes 1 - 6
174 	 */
175 	writel(p1, &dev->IndexRegs->Mailbox[1]);
176 	writel(p2, &dev->IndexRegs->Mailbox[2]);
177 	writel(p3, &dev->IndexRegs->Mailbox[3]);
178 	writel(p4, &dev->IndexRegs->Mailbox[4]);
179 	/*
180 	 *	Clear the synch command doorbell to start on a clean slate.
181 	 */
182 	rx_writel(dev, OutboundDoorbellReg, OUTBOUNDDOORBELL_0);
183 	/*
184 	 *	Disable doorbell interrupts
185 	 */
186 	rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff);
187 	/*
188 	 *	Force the completion of the mask register write before issuing
189 	 *	the interrupt.
190 	 */
191 	rx_readb (dev, MUnit.OIMR);
192 	/*
193 	 *	Signal that there is a new synch command
194 	 */
195 	rx_writel(dev, InboundDoorbellReg, INBOUNDDOORBELL_0);
196 
197 	ok = 0;
198 	start = jiffies;
199 
200 	/*
201 	 *	Wait up to 30 seconds
202 	 */
203 	while (time_before(jiffies, start+30*HZ))
204 	{
205 		udelay(5);	/* Delay 5 microseconds to let Mon960 get info. */
206 		/*
207 		 *	Mon960 will set doorbell0 bit when it has completed the command.
208 		 */
209 		if (rx_readl(dev, OutboundDoorbellReg) & OUTBOUNDDOORBELL_0) {
210 			/*
211 			 *	Clear the doorbell.
212 			 */
213 			rx_writel(dev, OutboundDoorbellReg, OUTBOUNDDOORBELL_0);
214 			ok = 1;
215 			break;
216 		}
217 		/*
218 		 *	Yield the processor in case we are slow
219 		 */
220 		msleep(1);
221 	}
222 	if (unlikely(ok != 1)) {
223 		/*
224 		 *	Restore interrupt mask even though we timed out
225 		 */
226 		aac_adapter_enable_int(dev);
227 		return -ETIMEDOUT;
228 	}
229 	/*
230 	 *	Pull the synch status from Mailbox 0.
231 	 */
232 	if (status)
233 		*status = readl(&dev->IndexRegs->Mailbox[0]);
234 	if (r1)
235 		*r1 = readl(&dev->IndexRegs->Mailbox[1]);
236 	if (r2)
237 		*r2 = readl(&dev->IndexRegs->Mailbox[2]);
238 	if (r3)
239 		*r3 = readl(&dev->IndexRegs->Mailbox[3]);
240 	if (r4)
241 		*r4 = readl(&dev->IndexRegs->Mailbox[4]);
242 	/*
243 	 *	Clear the synch command doorbell.
244 	 */
245 	rx_writel(dev, OutboundDoorbellReg, OUTBOUNDDOORBELL_0);
246 	/*
247 	 *	Restore interrupt mask
248 	 */
249 	aac_adapter_enable_int(dev);
250 	return 0;
251 
252 }
253 
254 /**
255  *	aac_rx_interrupt_adapter	-	interrupt adapter
256  *	@dev: Adapter
257  *
258  *	Send an interrupt to the i960 and breakpoint it.
259  */
260 
261 static void aac_rx_interrupt_adapter(struct aac_dev *dev)
262 {
263 	rx_sync_cmd(dev, BREAKPOINT_REQUEST, 0, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
264 }
265 
266 /**
267  *	aac_rx_notify_adapter		-	send an event to the adapter
268  *	@dev: Adapter
269  *	@event: Event to send
270  *
271  *	Notify the i960 that something it probably cares about has
272  *	happened.
273  */
274 
275 static void aac_rx_notify_adapter(struct aac_dev *dev, u32 event)
276 {
277 	switch (event) {
278 
279 	case AdapNormCmdQue:
280 		rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_1);
281 		break;
282 	case HostNormRespNotFull:
283 		rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_4);
284 		break;
285 	case AdapNormRespQue:
286 		rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_2);
287 		break;
288 	case HostNormCmdNotFull:
289 		rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_3);
290 		break;
291 	case HostShutdown:
292 		break;
293 	case FastIo:
294 		rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_6);
295 		break;
296 	case AdapPrintfDone:
297 		rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_5);
298 		break;
299 	default:
300 		BUG();
301 		break;
302 	}
303 }
304 
305 /**
306  *	aac_rx_start_adapter		-	activate adapter
307  *	@dev:	Adapter
308  *
309  *	Start up processing on an i960 based AAC adapter
310  */
311 
312 static void aac_rx_start_adapter(struct aac_dev *dev)
313 {
314 	union aac_init *init;
315 
316 	init = dev->init;
317 	init->r7.host_elapsed_seconds = cpu_to_le32(ktime_get_real_seconds());
318 	// We can only use a 32 bit address here
319 	rx_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa,
320 	  0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
321 }
322 
323 /**
324  *	aac_rx_check_health
325  *	@dev: device to check if healthy
326  *
327  *	Will attempt to determine if the specified adapter is alive and
328  *	capable of handling requests, returning 0 if alive.
329  */
330 static int aac_rx_check_health(struct aac_dev *dev)
331 {
332 	u32 status = rx_readl(dev, MUnit.OMRx[0]);
333 
334 	/*
335 	 *	Check to see if the board failed any self tests.
336 	 */
337 	if (unlikely(status & SELF_TEST_FAILED))
338 		return -1;
339 	/*
340 	 *	Check to see if the board panic'd.
341 	 */
342 	if (unlikely(status & KERNEL_PANIC)) {
343 		char * buffer;
344 		struct POSTSTATUS {
345 			__le32 Post_Command;
346 			__le32 Post_Address;
347 		} * post;
348 		dma_addr_t paddr, baddr;
349 		int ret;
350 
351 		if (likely((status & 0xFF000000L) == 0xBC000000L))
352 			return (status >> 16) & 0xFF;
353 		buffer = dma_alloc_coherent(&dev->pdev->dev, 512, &baddr,
354 					    GFP_KERNEL);
355 		ret = -2;
356 		if (unlikely(buffer == NULL))
357 			return ret;
358 		post = dma_alloc_coherent(&dev->pdev->dev,
359 					  sizeof(struct POSTSTATUS), &paddr,
360 					  GFP_KERNEL);
361 		if (unlikely(post == NULL)) {
362 			dma_free_coherent(&dev->pdev->dev, 512, buffer, baddr);
363 			return ret;
364 		}
365 		memset(buffer, 0, 512);
366 		post->Post_Command = cpu_to_le32(COMMAND_POST_RESULTS);
367 		post->Post_Address = cpu_to_le32(baddr);
368 		rx_writel(dev, MUnit.IMRx[0], paddr);
369 		rx_sync_cmd(dev, COMMAND_POST_RESULTS, baddr, 0, 0, 0, 0, 0,
370 		  NULL, NULL, NULL, NULL, NULL);
371 		dma_free_coherent(&dev->pdev->dev, sizeof(struct POSTSTATUS),
372 				  post, paddr);
373 		if (likely((buffer[0] == '0') && ((buffer[1] == 'x') || (buffer[1] == 'X')))) {
374 			ret = (hex_to_bin(buffer[2]) << 4) +
375 				hex_to_bin(buffer[3]);
376 		}
377 		dma_free_coherent(&dev->pdev->dev, 512, buffer, baddr);
378 		return ret;
379 	}
380 	/*
381 	 *	Wait for the adapter to be up and running.
382 	 */
383 	if (unlikely(!(status & KERNEL_UP_AND_RUNNING)))
384 		return -3;
385 	/*
386 	 *	Everything is OK
387 	 */
388 	return 0;
389 }
390 
391 /**
392  *	aac_rx_deliver_producer
393  *	@fib: fib to issue
394  *
395  *	Will send a fib, returning 0 if successful.
396  */
397 int aac_rx_deliver_producer(struct fib * fib)
398 {
399 	struct aac_dev *dev = fib->dev;
400 	struct aac_queue *q = &dev->queues->queue[AdapNormCmdQueue];
401 	u32 Index;
402 	unsigned long nointr = 0;
403 
404 	aac_queue_get( dev, &Index, AdapNormCmdQueue, fib->hw_fib_va, 1, fib, &nointr);
405 
406 	atomic_inc(&q->numpending);
407 	*(q->headers.producer) = cpu_to_le32(Index + 1);
408 	if (!(nointr & aac_config.irq_mod))
409 		aac_adapter_notify(dev, AdapNormCmdQueue);
410 
411 	return 0;
412 }
413 
414 /**
415  *	aac_rx_deliver_message
416  *	@fib: fib to issue
417  *
418  *	Will send a fib, returning 0 if successful.
419  */
420 static int aac_rx_deliver_message(struct fib * fib)
421 {
422 	struct aac_dev *dev = fib->dev;
423 	struct aac_queue *q = &dev->queues->queue[AdapNormCmdQueue];
424 	u32 Index;
425 	u64 addr;
426 	volatile void __iomem *device;
427 
428 	unsigned long count = 10000000L; /* 50 seconds */
429 	atomic_inc(&q->numpending);
430 	for(;;) {
431 		Index = rx_readl(dev, MUnit.InboundQueue);
432 		if (unlikely(Index == 0xFFFFFFFFL))
433 			Index = rx_readl(dev, MUnit.InboundQueue);
434 		if (likely(Index != 0xFFFFFFFFL))
435 			break;
436 		if (--count == 0) {
437 			atomic_dec(&q->numpending);
438 			return -ETIMEDOUT;
439 		}
440 		udelay(5);
441 	}
442 	device = dev->base + Index;
443 	addr = fib->hw_fib_pa;
444 	writel((u32)(addr & 0xffffffff), device);
445 	device += sizeof(u32);
446 	writel((u32)(addr >> 32), device);
447 	device += sizeof(u32);
448 	writel(le16_to_cpu(fib->hw_fib_va->header.Size), device);
449 	rx_writel(dev, MUnit.InboundQueue, Index);
450 	return 0;
451 }
452 
453 /**
454  *	aac_rx_ioremap
455  *	@dev: adapter
456  *	@size: mapping resize request
457  *
458  */
459 static int aac_rx_ioremap(struct aac_dev * dev, u32 size)
460 {
461 	if (!size) {
462 		iounmap(dev->regs.rx);
463 		return 0;
464 	}
465 	dev->base = dev->regs.rx = ioremap(dev->base_start, size);
466 	if (dev->base == NULL)
467 		return -1;
468 	dev->IndexRegs = &dev->regs.rx->IndexRegs;
469 	return 0;
470 }
471 
472 static int aac_rx_restart_adapter(struct aac_dev *dev, int bled, u8 reset_type)
473 {
474 	u32 var = 0;
475 
476 	if (!(dev->supplement_adapter_info.supported_options2 &
477 	  AAC_OPTION_MU_RESET) || (bled >= 0) || (bled == -2)) {
478 		if (bled)
479 			printk(KERN_ERR "%s%d: adapter kernel panic'd %x.\n",
480 				dev->name, dev->id, bled);
481 		else {
482 			bled = aac_adapter_sync_cmd(dev, IOP_RESET_ALWAYS,
483 			  0, 0, 0, 0, 0, 0, &var, NULL, NULL, NULL, NULL);
484 			if (!bled && (var != 0x00000001) && (var != 0x3803000F))
485 				bled = -EINVAL;
486 		}
487 		if (bled && (bled != -ETIMEDOUT))
488 			bled = aac_adapter_sync_cmd(dev, IOP_RESET,
489 			  0, 0, 0, 0, 0, 0, &var, NULL, NULL, NULL, NULL);
490 
491 		if (bled && (bled != -ETIMEDOUT))
492 			return -EINVAL;
493 	}
494 	if (bled && (var == 0x3803000F)) { /* USE_OTHER_METHOD */
495 		rx_writel(dev, MUnit.reserved2, 3);
496 		msleep(5000); /* Delay 5 seconds */
497 		var = 0x00000001;
498 	}
499 	if (bled && (var != 0x00000001))
500 		return -EINVAL;
501 	ssleep(5);
502 	if (rx_readl(dev, MUnit.OMRx[0]) & KERNEL_PANIC)
503 		return -ENODEV;
504 	if (startup_timeout < 300)
505 		startup_timeout = 300;
506 	return 0;
507 }
508 
509 /**
510  *	aac_rx_select_comm	-	Select communications method
511  *	@dev: Adapter
512  *	@comm: communications method
513  */
514 
515 int aac_rx_select_comm(struct aac_dev *dev, int comm)
516 {
517 	switch (comm) {
518 	case AAC_COMM_PRODUCER:
519 		dev->a_ops.adapter_enable_int = aac_rx_enable_interrupt_producer;
520 		dev->a_ops.adapter_intr = aac_rx_intr_producer;
521 		dev->a_ops.adapter_deliver = aac_rx_deliver_producer;
522 		break;
523 	case AAC_COMM_MESSAGE:
524 		dev->a_ops.adapter_enable_int = aac_rx_enable_interrupt_message;
525 		dev->a_ops.adapter_intr = aac_rx_intr_message;
526 		dev->a_ops.adapter_deliver = aac_rx_deliver_message;
527 		break;
528 	default:
529 		return 1;
530 	}
531 	return 0;
532 }
533 
534 /**
535  *	_aac_rx_init	-	initialize an i960 based AAC card
536  *	@dev: device to configure
537  *
538  *	Allocate and set up resources for the i960 based AAC variants. The
539  *	device_interface in the commregion will be allocated and linked
540  *	to the comm region.
541  */
542 
543 int _aac_rx_init(struct aac_dev *dev)
544 {
545 	unsigned long start;
546 	unsigned long status;
547 	int restart = 0;
548 	int instance = dev->id;
549 	const char * name = dev->name;
550 
551 	if (aac_adapter_ioremap(dev, dev->base_size)) {
552 		printk(KERN_WARNING "%s: unable to map adapter.\n", name);
553 		goto error_iounmap;
554 	}
555 
556 	/* Failure to reset here is an option ... */
557 	dev->a_ops.adapter_sync_cmd = rx_sync_cmd;
558 	dev->a_ops.adapter_enable_int = aac_rx_disable_interrupt;
559 	dev->OIMR = status = rx_readb (dev, MUnit.OIMR);
560 
561 	if (((status & 0x0c) != 0x0c) || dev->init_reset) {
562 		dev->init_reset = false;
563 		if (!aac_rx_restart_adapter(dev, 0, IOP_HWSOFT_RESET)) {
564 			/* Make sure the Hardware FIFO is empty */
565 			while ((++restart < 512) &&
566 			       (rx_readl(dev, MUnit.OutboundQueue) != 0xFFFFFFFFL));
567 		}
568 	}
569 
570 	/*
571 	 *	Check to see if the board panic'd while booting.
572 	 */
573 	status = rx_readl(dev, MUnit.OMRx[0]);
574 	if (status & KERNEL_PANIC) {
575 		if (aac_rx_restart_adapter(dev,
576 			aac_rx_check_health(dev), IOP_HWSOFT_RESET))
577 			goto error_iounmap;
578 		++restart;
579 	}
580 	/*
581 	 *	Check to see if the board failed any self tests.
582 	 */
583 	status = rx_readl(dev, MUnit.OMRx[0]);
584 	if (status & SELF_TEST_FAILED) {
585 		printk(KERN_ERR "%s%d: adapter self-test failed.\n", dev->name, instance);
586 		goto error_iounmap;
587 	}
588 	/*
589 	 *	Check to see if the monitor panic'd while booting.
590 	 */
591 	if (status & MONITOR_PANIC) {
592 		printk(KERN_ERR "%s%d: adapter monitor panic.\n", dev->name, instance);
593 		goto error_iounmap;
594 	}
595 	start = jiffies;
596 	/*
597 	 *	Wait for the adapter to be up and running. Wait up to 3 minutes
598 	 */
599 	while (!((status = rx_readl(dev, MUnit.OMRx[0])) & KERNEL_UP_AND_RUNNING))
600 	{
601 		if ((restart &&
602 		  (status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC))) ||
603 		  time_after(jiffies, start+HZ*startup_timeout)) {
604 			printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n",
605 					dev->name, instance, status);
606 			goto error_iounmap;
607 		}
608 		if (!restart &&
609 		  ((status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC)) ||
610 		  time_after(jiffies, start + HZ *
611 		  ((startup_timeout > 60)
612 		    ? (startup_timeout - 60)
613 		    : (startup_timeout / 2))))) {
614 			if (likely(!aac_rx_restart_adapter(dev,
615 				aac_rx_check_health(dev), IOP_HWSOFT_RESET)))
616 				start = jiffies;
617 			++restart;
618 		}
619 		msleep(1);
620 	}
621 	if (restart && aac_commit)
622 		aac_commit = 1;
623 	/*
624 	 *	Fill in the common function dispatch table.
625 	 */
626 	dev->a_ops.adapter_interrupt = aac_rx_interrupt_adapter;
627 	dev->a_ops.adapter_disable_int = aac_rx_disable_interrupt;
628 	dev->a_ops.adapter_notify = aac_rx_notify_adapter;
629 	dev->a_ops.adapter_sync_cmd = rx_sync_cmd;
630 	dev->a_ops.adapter_check_health = aac_rx_check_health;
631 	dev->a_ops.adapter_restart = aac_rx_restart_adapter;
632 	dev->a_ops.adapter_start = aac_rx_start_adapter;
633 
634 	/*
635 	 *	First clear out all interrupts.  Then enable the one's that we
636 	 *	can handle.
637 	 */
638 	aac_adapter_comm(dev, AAC_COMM_PRODUCER);
639 	aac_adapter_disable_int(dev);
640 	rx_writel(dev, MUnit.ODR, 0xffffffff);
641 	aac_adapter_enable_int(dev);
642 
643 	if (aac_init_adapter(dev) == NULL)
644 		goto error_iounmap;
645 	aac_adapter_comm(dev, dev->comm_interface);
646 	dev->sync_mode = 0;	/* sync. mode not supported */
647 	dev->msi = aac_msi && !pci_enable_msi(dev->pdev);
648 	if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr,
649 			IRQF_SHARED, "aacraid", dev) < 0) {
650 		if (dev->msi)
651 			pci_disable_msi(dev->pdev);
652 		printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
653 			name, instance);
654 		goto error_iounmap;
655 	}
656 	dev->dbg_base = dev->base_start;
657 	dev->dbg_base_mapped = dev->base;
658 	dev->dbg_size = dev->base_size;
659 
660 	aac_adapter_enable_int(dev);
661 	/*
662 	 *	Tell the adapter that all is configured, and it can
663 	 * start accepting requests
664 	 */
665 	aac_rx_start_adapter(dev);
666 
667 	return 0;
668 
669 error_iounmap:
670 
671 	return -1;
672 }
673 
674 int aac_rx_init(struct aac_dev *dev)
675 {
676 	/*
677 	 *	Fill in the function dispatch table.
678 	 */
679 	dev->a_ops.adapter_ioremap = aac_rx_ioremap;
680 	dev->a_ops.adapter_comm = aac_rx_select_comm;
681 
682 	return _aac_rx_init(dev);
683 }
684