1 /* 2 * Adaptec AAC series RAID controller driver 3 * (c) Copyright 2001 Red Hat Inc. 4 * 5 * based on the old aacraid driver that is.. 6 * Adaptec aacraid device driver for Linux. 7 * 8 * Copyright (c) 2000-2010 Adaptec, Inc. 9 * 2010 PMC-Sierra, Inc. (aacraid@pmc-sierra.com) 10 * 11 * This program is free software; you can redistribute it and/or modify 12 * it under the terms of the GNU General Public License as published by 13 * the Free Software Foundation; either version 2, or (at your option) 14 * any later version. 15 * 16 * This program is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * 21 * You should have received a copy of the GNU General Public License 22 * along with this program; see the file COPYING. If not, write to 23 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. 24 * 25 * Module Name: 26 * comminit.c 27 * 28 * Abstract: This supports the initialization of the host adapter commuication interface. 29 * This is a platform dependent module for the pci cyclone board. 30 * 31 */ 32 33 #include <linux/kernel.h> 34 #include <linux/init.h> 35 #include <linux/types.h> 36 #include <linux/pci.h> 37 #include <linux/spinlock.h> 38 #include <linux/slab.h> 39 #include <linux/blkdev.h> 40 #include <linux/delay.h> 41 #include <linux/completion.h> 42 #include <linux/mm.h> 43 #include <scsi/scsi_host.h> 44 45 #include "aacraid.h" 46 47 struct aac_common aac_config = { 48 .irq_mod = 1 49 }; 50 51 static inline int aac_is_msix_mode(struct aac_dev *dev) 52 { 53 u32 status; 54 55 status = src_readl(dev, MUnit.OMR); 56 return (status & AAC_INT_MODE_MSIX); 57 } 58 59 static inline void aac_change_to_intx(struct aac_dev *dev) 60 { 61 aac_src_access_devreg(dev, AAC_DISABLE_MSIX); 62 aac_src_access_devreg(dev, AAC_ENABLE_INTX); 63 } 64 65 static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long commsize, unsigned long commalign) 66 { 67 unsigned char *base; 68 unsigned long size, align; 69 const unsigned long fibsize = dev->max_fib_size; 70 const unsigned long printfbufsiz = 256; 71 unsigned long host_rrq_size = 0; 72 struct aac_init *init; 73 dma_addr_t phys; 74 unsigned long aac_max_hostphysmempages; 75 76 if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE1 || 77 dev->comm_interface == AAC_COMM_MESSAGE_TYPE2) 78 host_rrq_size = (dev->scsi_host_ptr->can_queue 79 + AAC_NUM_MGT_FIB) * sizeof(u32); 80 size = fibsize + sizeof(struct aac_init) + commsize + 81 commalign + printfbufsiz + host_rrq_size; 82 83 base = pci_alloc_consistent(dev->pdev, size, &phys); 84 85 if(base == NULL) 86 { 87 printk(KERN_ERR "aacraid: unable to create mapping.\n"); 88 return 0; 89 } 90 dev->comm_addr = (void *)base; 91 dev->comm_phys = phys; 92 dev->comm_size = size; 93 94 if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE1 || 95 dev->comm_interface == AAC_COMM_MESSAGE_TYPE2) { 96 dev->host_rrq = (u32 *)(base + fibsize); 97 dev->host_rrq_pa = phys + fibsize; 98 memset(dev->host_rrq, 0, host_rrq_size); 99 } 100 101 dev->init = (struct aac_init *)(base + fibsize + host_rrq_size); 102 dev->init_pa = phys + fibsize + host_rrq_size; 103 104 init = dev->init; 105 106 init->InitStructRevision = cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION); 107 if (dev->max_fib_size != sizeof(struct hw_fib)) 108 init->InitStructRevision = cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_4); 109 init->Sa_MSIXVectors = cpu_to_le32(SA_INIT_NUM_MSIXVECTORS); 110 init->fsrev = cpu_to_le32(dev->fsrev); 111 112 /* 113 * Adapter Fibs are the first thing allocated so that they 114 * start page aligned 115 */ 116 dev->aif_base_va = (struct hw_fib *)base; 117 118 init->AdapterFibsVirtualAddress = 0; 119 init->AdapterFibsPhysicalAddress = cpu_to_le32((u32)phys); 120 init->AdapterFibsSize = cpu_to_le32(fibsize); 121 init->AdapterFibAlign = cpu_to_le32(sizeof(struct hw_fib)); 122 /* 123 * number of 4k pages of host physical memory. The aacraid fw needs 124 * this number to be less than 4gb worth of pages. New firmware doesn't 125 * have any issues with the mapping system, but older Firmware did, and 126 * had *troubles* dealing with the math overloading past 32 bits, thus 127 * we must limit this field. 128 */ 129 aac_max_hostphysmempages = dma_get_required_mask(&dev->pdev->dev) >> 12; 130 if (aac_max_hostphysmempages < AAC_MAX_HOSTPHYSMEMPAGES) 131 init->HostPhysMemPages = cpu_to_le32(aac_max_hostphysmempages); 132 else 133 init->HostPhysMemPages = cpu_to_le32(AAC_MAX_HOSTPHYSMEMPAGES); 134 135 init->InitFlags = cpu_to_le32(INITFLAGS_DRIVER_USES_UTC_TIME | 136 INITFLAGS_DRIVER_SUPPORTS_PM); 137 init->MaxIoCommands = cpu_to_le32(dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB); 138 init->MaxIoSize = cpu_to_le32(dev->scsi_host_ptr->max_sectors << 9); 139 init->MaxFibSize = cpu_to_le32(dev->max_fib_size); 140 init->MaxNumAif = cpu_to_le32(dev->max_num_aif); 141 142 if (dev->comm_interface == AAC_COMM_MESSAGE) { 143 init->InitFlags |= cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED); 144 dprintk((KERN_WARNING"aacraid: New Comm Interface enabled\n")); 145 } else if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE1) { 146 init->InitStructRevision = cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_6); 147 init->InitFlags |= cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED | 148 INITFLAGS_NEW_COMM_TYPE1_SUPPORTED | INITFLAGS_FAST_JBOD_SUPPORTED); 149 init->HostRRQ_AddrHigh = cpu_to_le32((u32)((u64)dev->host_rrq_pa >> 32)); 150 init->HostRRQ_AddrLow = cpu_to_le32((u32)(dev->host_rrq_pa & 0xffffffff)); 151 dprintk((KERN_WARNING"aacraid: New Comm Interface type1 enabled\n")); 152 } else if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2) { 153 init->InitStructRevision = cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_7); 154 init->InitFlags |= cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED | 155 INITFLAGS_NEW_COMM_TYPE2_SUPPORTED | INITFLAGS_FAST_JBOD_SUPPORTED); 156 init->HostRRQ_AddrHigh = cpu_to_le32((u32)((u64)dev->host_rrq_pa >> 32)); 157 init->HostRRQ_AddrLow = cpu_to_le32((u32)(dev->host_rrq_pa & 0xffffffff)); 158 /* number of MSI-X */ 159 init->Sa_MSIXVectors = cpu_to_le32(dev->max_msix); 160 dprintk((KERN_WARNING"aacraid: New Comm Interface type2 enabled\n")); 161 } 162 163 /* 164 * Increment the base address by the amount already used 165 */ 166 base = base + fibsize + host_rrq_size + sizeof(struct aac_init); 167 phys = (dma_addr_t)((ulong)phys + fibsize + host_rrq_size + 168 sizeof(struct aac_init)); 169 170 /* 171 * Align the beginning of Headers to commalign 172 */ 173 align = (commalign - ((uintptr_t)(base) & (commalign - 1))); 174 base = base + align; 175 phys = phys + align; 176 /* 177 * Fill in addresses of the Comm Area Headers and Queues 178 */ 179 *commaddr = base; 180 init->CommHeaderAddress = cpu_to_le32((u32)phys); 181 /* 182 * Increment the base address by the size of the CommArea 183 */ 184 base = base + commsize; 185 phys = phys + commsize; 186 /* 187 * Place the Printf buffer area after the Fast I/O comm area. 188 */ 189 dev->printfbuf = (void *)base; 190 init->printfbuf = cpu_to_le32(phys); 191 init->printfbufsiz = cpu_to_le32(printfbufsiz); 192 memset(base, 0, printfbufsiz); 193 return 1; 194 } 195 196 static void aac_queue_init(struct aac_dev * dev, struct aac_queue * q, u32 *mem, int qsize) 197 { 198 atomic_set(&q->numpending, 0); 199 q->dev = dev; 200 init_waitqueue_head(&q->cmdready); 201 INIT_LIST_HEAD(&q->cmdq); 202 init_waitqueue_head(&q->qfull); 203 spin_lock_init(&q->lockdata); 204 q->lock = &q->lockdata; 205 q->headers.producer = (__le32 *)mem; 206 q->headers.consumer = (__le32 *)(mem+1); 207 *(q->headers.producer) = cpu_to_le32(qsize); 208 *(q->headers.consumer) = cpu_to_le32(qsize); 209 q->entries = qsize; 210 } 211 212 /** 213 * aac_send_shutdown - shutdown an adapter 214 * @dev: Adapter to shutdown 215 * 216 * This routine will send a VM_CloseAll (shutdown) request to the adapter. 217 */ 218 219 int aac_send_shutdown(struct aac_dev * dev) 220 { 221 struct fib * fibctx; 222 struct aac_close *cmd; 223 int status; 224 225 fibctx = aac_fib_alloc(dev); 226 if (!fibctx) 227 return -ENOMEM; 228 aac_fib_init(fibctx); 229 230 mutex_lock(&dev->ioctl_mutex); 231 dev->adapter_shutdown = 1; 232 mutex_unlock(&dev->ioctl_mutex); 233 234 cmd = (struct aac_close *) fib_data(fibctx); 235 cmd->command = cpu_to_le32(VM_CloseAll); 236 cmd->cid = cpu_to_le32(0xfffffffe); 237 238 status = aac_fib_send(ContainerCommand, 239 fibctx, 240 sizeof(struct aac_close), 241 FsaNormal, 242 -2 /* Timeout silently */, 1, 243 NULL, NULL); 244 245 if (status >= 0) 246 aac_fib_complete(fibctx); 247 /* FIB should be freed only after getting the response from the F/W */ 248 if (status != -ERESTARTSYS) 249 aac_fib_free(fibctx); 250 if ((dev->pdev->device == PMC_DEVICE_S7 || 251 dev->pdev->device == PMC_DEVICE_S8 || 252 dev->pdev->device == PMC_DEVICE_S9) && 253 dev->msi_enabled) 254 aac_src_access_devreg(dev, AAC_ENABLE_INTX); 255 return status; 256 } 257 258 /** 259 * aac_comm_init - Initialise FSA data structures 260 * @dev: Adapter to initialise 261 * 262 * Initializes the data structures that are required for the FSA commuication 263 * interface to operate. 264 * Returns 265 * 1 - if we were able to init the commuication interface. 266 * 0 - If there were errors initing. This is a fatal error. 267 */ 268 269 static int aac_comm_init(struct aac_dev * dev) 270 { 271 unsigned long hdrsize = (sizeof(u32) * NUMBER_OF_COMM_QUEUES) * 2; 272 unsigned long queuesize = sizeof(struct aac_entry) * TOTAL_QUEUE_ENTRIES; 273 u32 *headers; 274 struct aac_entry * queues; 275 unsigned long size; 276 struct aac_queue_block * comm = dev->queues; 277 /* 278 * Now allocate and initialize the zone structures used as our 279 * pool of FIB context records. The size of the zone is based 280 * on the system memory size. We also initialize the mutex used 281 * to protect the zone. 282 */ 283 spin_lock_init(&dev->fib_lock); 284 285 /* 286 * Allocate the physically contiguous space for the commuication 287 * queue headers. 288 */ 289 290 size = hdrsize + queuesize; 291 292 if (!aac_alloc_comm(dev, (void * *)&headers, size, QUEUE_ALIGNMENT)) 293 return -ENOMEM; 294 295 queues = (struct aac_entry *)(((ulong)headers) + hdrsize); 296 297 /* Adapter to Host normal priority Command queue */ 298 comm->queue[HostNormCmdQueue].base = queues; 299 aac_queue_init(dev, &comm->queue[HostNormCmdQueue], headers, HOST_NORM_CMD_ENTRIES); 300 queues += HOST_NORM_CMD_ENTRIES; 301 headers += 2; 302 303 /* Adapter to Host high priority command queue */ 304 comm->queue[HostHighCmdQueue].base = queues; 305 aac_queue_init(dev, &comm->queue[HostHighCmdQueue], headers, HOST_HIGH_CMD_ENTRIES); 306 307 queues += HOST_HIGH_CMD_ENTRIES; 308 headers +=2; 309 310 /* Host to adapter normal priority command queue */ 311 comm->queue[AdapNormCmdQueue].base = queues; 312 aac_queue_init(dev, &comm->queue[AdapNormCmdQueue], headers, ADAP_NORM_CMD_ENTRIES); 313 314 queues += ADAP_NORM_CMD_ENTRIES; 315 headers += 2; 316 317 /* host to adapter high priority command queue */ 318 comm->queue[AdapHighCmdQueue].base = queues; 319 aac_queue_init(dev, &comm->queue[AdapHighCmdQueue], headers, ADAP_HIGH_CMD_ENTRIES); 320 321 queues += ADAP_HIGH_CMD_ENTRIES; 322 headers += 2; 323 324 /* adapter to host normal priority response queue */ 325 comm->queue[HostNormRespQueue].base = queues; 326 aac_queue_init(dev, &comm->queue[HostNormRespQueue], headers, HOST_NORM_RESP_ENTRIES); 327 queues += HOST_NORM_RESP_ENTRIES; 328 headers += 2; 329 330 /* adapter to host high priority response queue */ 331 comm->queue[HostHighRespQueue].base = queues; 332 aac_queue_init(dev, &comm->queue[HostHighRespQueue], headers, HOST_HIGH_RESP_ENTRIES); 333 334 queues += HOST_HIGH_RESP_ENTRIES; 335 headers += 2; 336 337 /* host to adapter normal priority response queue */ 338 comm->queue[AdapNormRespQueue].base = queues; 339 aac_queue_init(dev, &comm->queue[AdapNormRespQueue], headers, ADAP_NORM_RESP_ENTRIES); 340 341 queues += ADAP_NORM_RESP_ENTRIES; 342 headers += 2; 343 344 /* host to adapter high priority response queue */ 345 comm->queue[AdapHighRespQueue].base = queues; 346 aac_queue_init(dev, &comm->queue[AdapHighRespQueue], headers, ADAP_HIGH_RESP_ENTRIES); 347 348 comm->queue[AdapNormCmdQueue].lock = comm->queue[HostNormRespQueue].lock; 349 comm->queue[AdapHighCmdQueue].lock = comm->queue[HostHighRespQueue].lock; 350 comm->queue[AdapNormRespQueue].lock = comm->queue[HostNormCmdQueue].lock; 351 comm->queue[AdapHighRespQueue].lock = comm->queue[HostHighCmdQueue].lock; 352 353 return 0; 354 } 355 356 void aac_define_int_mode(struct aac_dev *dev) 357 { 358 int i, msi_count, min_msix; 359 360 msi_count = i = 0; 361 /* max. vectors from GET_COMM_PREFERRED_SETTINGS */ 362 if (dev->max_msix == 0 || 363 dev->pdev->device == PMC_DEVICE_S6 || 364 dev->sync_mode) { 365 dev->max_msix = 1; 366 dev->vector_cap = 367 dev->scsi_host_ptr->can_queue + 368 AAC_NUM_MGT_FIB; 369 return; 370 } 371 372 /* Don't bother allocating more MSI-X vectors than cpus */ 373 msi_count = min(dev->max_msix, 374 (unsigned int)num_online_cpus()); 375 376 dev->max_msix = msi_count; 377 378 if (msi_count > AAC_MAX_MSIX) 379 msi_count = AAC_MAX_MSIX; 380 381 if (msi_count > 1 && 382 pci_find_capability(dev->pdev, PCI_CAP_ID_MSIX)) { 383 min_msix = 2; 384 i = pci_alloc_irq_vectors(dev->pdev, 385 min_msix, msi_count, 386 PCI_IRQ_MSIX | PCI_IRQ_AFFINITY); 387 if (i > 0) { 388 dev->msi_enabled = 1; 389 msi_count = i; 390 } else { 391 dev->msi_enabled = 0; 392 dev_err(&dev->pdev->dev, 393 "MSIX not supported!! Will try INTX 0x%x.\n", i); 394 } 395 } 396 397 if (!dev->msi_enabled) 398 dev->max_msix = msi_count = 1; 399 else { 400 if (dev->max_msix > msi_count) 401 dev->max_msix = msi_count; 402 } 403 dev->vector_cap = 404 (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB) / 405 msi_count; 406 } 407 struct aac_dev *aac_init_adapter(struct aac_dev *dev) 408 { 409 u32 status[5]; 410 struct Scsi_Host * host = dev->scsi_host_ptr; 411 extern int aac_sync_mode; 412 413 /* 414 * Check the preferred comm settings, defaults from template. 415 */ 416 dev->management_fib_count = 0; 417 spin_lock_init(&dev->manage_lock); 418 spin_lock_init(&dev->sync_lock); 419 spin_lock_init(&dev->iq_lock); 420 dev->max_fib_size = sizeof(struct hw_fib); 421 dev->sg_tablesize = host->sg_tablesize = (dev->max_fib_size 422 - sizeof(struct aac_fibhdr) 423 - sizeof(struct aac_write) + sizeof(struct sgentry)) 424 / sizeof(struct sgentry); 425 dev->comm_interface = AAC_COMM_PRODUCER; 426 dev->raw_io_interface = dev->raw_io_64 = 0; 427 428 429 /* 430 * Enable INTX mode, if not done already Enabled 431 */ 432 if (aac_is_msix_mode(dev)) { 433 aac_change_to_intx(dev); 434 dev_info(&dev->pdev->dev, "Changed firmware to INTX mode"); 435 } 436 437 if ((!aac_adapter_sync_cmd(dev, GET_ADAPTER_PROPERTIES, 438 0, 0, 0, 0, 0, 0, 439 status+0, status+1, status+2, status+3, NULL)) && 440 (status[0] == 0x00000001)) { 441 dev->doorbell_mask = status[3]; 442 if (status[1] & le32_to_cpu(AAC_OPT_NEW_COMM_64)) 443 dev->raw_io_64 = 1; 444 dev->sync_mode = aac_sync_mode; 445 if (dev->a_ops.adapter_comm && 446 (status[1] & le32_to_cpu(AAC_OPT_NEW_COMM))) { 447 dev->comm_interface = AAC_COMM_MESSAGE; 448 dev->raw_io_interface = 1; 449 if ((status[1] & le32_to_cpu(AAC_OPT_NEW_COMM_TYPE1))) { 450 /* driver supports TYPE1 (Tupelo) */ 451 dev->comm_interface = AAC_COMM_MESSAGE_TYPE1; 452 } else if ((status[1] & le32_to_cpu(AAC_OPT_NEW_COMM_TYPE2))) { 453 /* driver supports TYPE2 (Denali) */ 454 dev->comm_interface = AAC_COMM_MESSAGE_TYPE2; 455 } else if ((status[1] & le32_to_cpu(AAC_OPT_NEW_COMM_TYPE4)) || 456 (status[1] & le32_to_cpu(AAC_OPT_NEW_COMM_TYPE3))) { 457 /* driver doesn't TYPE3 and TYPE4 */ 458 /* switch to sync. mode */ 459 dev->comm_interface = AAC_COMM_MESSAGE_TYPE2; 460 dev->sync_mode = 1; 461 } 462 } 463 if ((dev->comm_interface == AAC_COMM_MESSAGE) && 464 (status[2] > dev->base_size)) { 465 aac_adapter_ioremap(dev, 0); 466 dev->base_size = status[2]; 467 if (aac_adapter_ioremap(dev, status[2])) { 468 /* remap failed, go back ... */ 469 dev->comm_interface = AAC_COMM_PRODUCER; 470 if (aac_adapter_ioremap(dev, AAC_MIN_FOOTPRINT_SIZE)) { 471 printk(KERN_WARNING 472 "aacraid: unable to map adapter.\n"); 473 return NULL; 474 } 475 } 476 } 477 } 478 dev->max_msix = 0; 479 dev->msi_enabled = 0; 480 dev->adapter_shutdown = 0; 481 if ((!aac_adapter_sync_cmd(dev, GET_COMM_PREFERRED_SETTINGS, 482 0, 0, 0, 0, 0, 0, 483 status+0, status+1, status+2, status+3, status+4)) 484 && (status[0] == 0x00000001)) { 485 /* 486 * status[1] >> 16 maximum command size in KB 487 * status[1] & 0xFFFF maximum FIB size 488 * status[2] >> 16 maximum SG elements to driver 489 * status[2] & 0xFFFF maximum SG elements from driver 490 * status[3] & 0xFFFF maximum number FIBs outstanding 491 */ 492 host->max_sectors = (status[1] >> 16) << 1; 493 /* Multiple of 32 for PMC */ 494 dev->max_fib_size = status[1] & 0xFFE0; 495 host->sg_tablesize = status[2] >> 16; 496 dev->sg_tablesize = status[2] & 0xFFFF; 497 if (dev->pdev->device == PMC_DEVICE_S7 || 498 dev->pdev->device == PMC_DEVICE_S8 || 499 dev->pdev->device == PMC_DEVICE_S9) 500 host->can_queue = ((status[3] >> 16) ? (status[3] >> 16) : 501 (status[3] & 0xFFFF)) - AAC_NUM_MGT_FIB; 502 else 503 host->can_queue = (status[3] & 0xFFFF) - AAC_NUM_MGT_FIB; 504 dev->max_num_aif = status[4] & 0xFFFF; 505 /* 506 * NOTE: 507 * All these overrides are based on a fixed internal 508 * knowledge and understanding of existing adapters, 509 * acbsize should be set with caution. 510 */ 511 if (acbsize == 512) { 512 host->max_sectors = AAC_MAX_32BIT_SGBCOUNT; 513 dev->max_fib_size = 512; 514 dev->sg_tablesize = host->sg_tablesize 515 = (512 - sizeof(struct aac_fibhdr) 516 - sizeof(struct aac_write) + sizeof(struct sgentry)) 517 / sizeof(struct sgentry); 518 host->can_queue = AAC_NUM_IO_FIB; 519 } else if (acbsize == 2048) { 520 host->max_sectors = 512; 521 dev->max_fib_size = 2048; 522 host->sg_tablesize = 65; 523 dev->sg_tablesize = 81; 524 host->can_queue = 512 - AAC_NUM_MGT_FIB; 525 } else if (acbsize == 4096) { 526 host->max_sectors = 1024; 527 dev->max_fib_size = 4096; 528 host->sg_tablesize = 129; 529 dev->sg_tablesize = 166; 530 host->can_queue = 256 - AAC_NUM_MGT_FIB; 531 } else if (acbsize == 8192) { 532 host->max_sectors = 2048; 533 dev->max_fib_size = 8192; 534 host->sg_tablesize = 257; 535 dev->sg_tablesize = 337; 536 host->can_queue = 128 - AAC_NUM_MGT_FIB; 537 } else if (acbsize > 0) { 538 printk("Illegal acbsize=%d ignored\n", acbsize); 539 } 540 } 541 { 542 543 if (numacb > 0) { 544 if (numacb < host->can_queue) 545 host->can_queue = numacb; 546 else 547 printk("numacb=%d ignored\n", numacb); 548 } 549 } 550 551 if (host->can_queue > AAC_NUM_IO_FIB) 552 host->can_queue = AAC_NUM_IO_FIB; 553 554 if (dev->pdev->device == PMC_DEVICE_S6 || 555 dev->pdev->device == PMC_DEVICE_S7 || 556 dev->pdev->device == PMC_DEVICE_S8 || 557 dev->pdev->device == PMC_DEVICE_S9) 558 aac_define_int_mode(dev); 559 /* 560 * Ok now init the communication subsystem 561 */ 562 563 dev->queues = kzalloc(sizeof(struct aac_queue_block), GFP_KERNEL); 564 if (dev->queues == NULL) { 565 printk(KERN_ERR "Error could not allocate comm region.\n"); 566 return NULL; 567 } 568 569 if (aac_comm_init(dev)<0){ 570 kfree(dev->queues); 571 return NULL; 572 } 573 /* 574 * Initialize the list of fibs 575 */ 576 if (aac_fib_setup(dev) < 0) { 577 kfree(dev->queues); 578 return NULL; 579 } 580 581 INIT_LIST_HEAD(&dev->fib_list); 582 INIT_LIST_HEAD(&dev->sync_fib_list); 583 584 return dev; 585 } 586 587