1 #ifndef dprintk 2 # define dprintk(x) 3 #endif 4 /* eg: if (nblank(dprintk(x))) */ 5 #define _nblank(x) #x 6 #define nblank(x) _nblank(x)[0] 7 8 #include <linux/interrupt.h> 9 #include <linux/pci.h> 10 11 /*------------------------------------------------------------------------------ 12 * D E F I N E S 13 *----------------------------------------------------------------------------*/ 14 15 #define AAC_MAX_MSIX 32 /* vectors */ 16 #define AAC_PCI_MSI_ENABLE 0x8000 17 18 enum { 19 AAC_ENABLE_INTERRUPT = 0x0, 20 AAC_DISABLE_INTERRUPT, 21 AAC_ENABLE_MSIX, 22 AAC_DISABLE_MSIX, 23 AAC_CLEAR_AIF_BIT, 24 AAC_CLEAR_SYNC_BIT, 25 AAC_ENABLE_INTX 26 }; 27 28 #define AAC_INT_MODE_INTX (1<<0) 29 #define AAC_INT_MODE_MSI (1<<1) 30 #define AAC_INT_MODE_AIF (1<<2) 31 #define AAC_INT_MODE_SYNC (1<<3) 32 33 #define AAC_INT_ENABLE_TYPE1_INTX 0xfffffffb 34 #define AAC_INT_ENABLE_TYPE1_MSIX 0xfffffffa 35 #define AAC_INT_DISABLE_ALL 0xffffffff 36 37 /* Bit definitions in IOA->Host Interrupt Register */ 38 #define PMC_TRANSITION_TO_OPERATIONAL (1<<31) 39 #define PMC_IOARCB_TRANSFER_FAILED (1<<28) 40 #define PMC_IOA_UNIT_CHECK (1<<27) 41 #define PMC_NO_HOST_RRQ_FOR_CMD_RESPONSE (1<<26) 42 #define PMC_CRITICAL_IOA_OP_IN_PROGRESS (1<<25) 43 #define PMC_IOARRIN_LOST (1<<4) 44 #define PMC_SYSTEM_BUS_MMIO_ERROR (1<<3) 45 #define PMC_IOA_PROCESSOR_IN_ERROR_STATE (1<<2) 46 #define PMC_HOST_RRQ_VALID (1<<1) 47 #define PMC_OPERATIONAL_STATUS (1<<31) 48 #define PMC_ALLOW_MSIX_VECTOR0 (1<<0) 49 50 #define PMC_IOA_ERROR_INTERRUPTS (PMC_IOARCB_TRANSFER_FAILED | \ 51 PMC_IOA_UNIT_CHECK | \ 52 PMC_NO_HOST_RRQ_FOR_CMD_RESPONSE | \ 53 PMC_IOARRIN_LOST | \ 54 PMC_SYSTEM_BUS_MMIO_ERROR | \ 55 PMC_IOA_PROCESSOR_IN_ERROR_STATE) 56 57 #define PMC_ALL_INTERRUPT_BITS (PMC_IOA_ERROR_INTERRUPTS | \ 58 PMC_HOST_RRQ_VALID | \ 59 PMC_TRANSITION_TO_OPERATIONAL | \ 60 PMC_ALLOW_MSIX_VECTOR0) 61 #define PMC_GLOBAL_INT_BIT2 0x00000004 62 #define PMC_GLOBAL_INT_BIT0 0x00000001 63 64 #ifndef AAC_DRIVER_BUILD 65 # define AAC_DRIVER_BUILD 40709 66 # define AAC_DRIVER_BRANCH "-ms" 67 #endif 68 #define MAXIMUM_NUM_CONTAINERS 32 69 70 #define AAC_NUM_MGT_FIB 8 71 #define AAC_NUM_IO_FIB (1024 - AAC_NUM_MGT_FIB) 72 #define AAC_NUM_FIB (AAC_NUM_IO_FIB + AAC_NUM_MGT_FIB) 73 74 #define AAC_MAX_LUN (8) 75 76 #define AAC_MAX_HOSTPHYSMEMPAGES (0xfffff) 77 #define AAC_MAX_32BIT_SGBCOUNT ((unsigned short)256) 78 79 #define AAC_DEBUG_INSTRUMENT_AIF_DELETE 80 81 /* 82 * These macros convert from physical channels to virtual channels 83 */ 84 #define CONTAINER_CHANNEL (0) 85 #define CONTAINER_TO_CHANNEL(cont) (CONTAINER_CHANNEL) 86 #define CONTAINER_TO_ID(cont) (cont) 87 #define CONTAINER_TO_LUN(cont) (0) 88 89 #define PMC_DEVICE_S6 0x28b 90 #define PMC_DEVICE_S7 0x28c 91 #define PMC_DEVICE_S8 0x28d 92 #define PMC_DEVICE_S9 0x28f 93 94 #define aac_phys_to_logical(x) ((x)+1) 95 #define aac_logical_to_phys(x) ((x)?(x)-1:0) 96 97 /* #define AAC_DETAILED_STATUS_INFO */ 98 99 struct diskparm 100 { 101 int heads; 102 int sectors; 103 int cylinders; 104 }; 105 106 107 /* 108 * Firmware constants 109 */ 110 111 #define CT_NONE 0 112 #define CT_OK 218 113 #define FT_FILESYS 8 /* ADAPTEC's "FSA"(tm) filesystem */ 114 #define FT_DRIVE 9 /* physical disk - addressable in scsi by bus/id/lun */ 115 116 /* 117 * Host side memory scatter gather list 118 * Used by the adapter for read, write, and readdirplus operations 119 * We have separate 32 and 64 bit version because even 120 * on 64 bit systems not all cards support the 64 bit version 121 */ 122 struct sgentry { 123 __le32 addr; /* 32-bit address. */ 124 __le32 count; /* Length. */ 125 }; 126 127 struct user_sgentry { 128 u32 addr; /* 32-bit address. */ 129 u32 count; /* Length. */ 130 }; 131 132 struct sgentry64 { 133 __le32 addr[2]; /* 64-bit addr. 2 pieces for data alignment */ 134 __le32 count; /* Length. */ 135 }; 136 137 struct user_sgentry64 { 138 u32 addr[2]; /* 64-bit addr. 2 pieces for data alignment */ 139 u32 count; /* Length. */ 140 }; 141 142 struct sgentryraw { 143 __le32 next; /* reserved for F/W use */ 144 __le32 prev; /* reserved for F/W use */ 145 __le32 addr[2]; 146 __le32 count; 147 __le32 flags; /* reserved for F/W use */ 148 }; 149 150 struct user_sgentryraw { 151 u32 next; /* reserved for F/W use */ 152 u32 prev; /* reserved for F/W use */ 153 u32 addr[2]; 154 u32 count; 155 u32 flags; /* reserved for F/W use */ 156 }; 157 158 struct sge_ieee1212 { 159 u32 addrLow; 160 u32 addrHigh; 161 u32 length; 162 u32 flags; 163 }; 164 165 /* 166 * SGMAP 167 * 168 * This is the SGMAP structure for all commands that use 169 * 32-bit addressing. 170 */ 171 172 struct sgmap { 173 __le32 count; 174 struct sgentry sg[1]; 175 }; 176 177 struct user_sgmap { 178 u32 count; 179 struct user_sgentry sg[1]; 180 }; 181 182 struct sgmap64 { 183 __le32 count; 184 struct sgentry64 sg[1]; 185 }; 186 187 struct user_sgmap64 { 188 u32 count; 189 struct user_sgentry64 sg[1]; 190 }; 191 192 struct sgmapraw { 193 __le32 count; 194 struct sgentryraw sg[1]; 195 }; 196 197 struct user_sgmapraw { 198 u32 count; 199 struct user_sgentryraw sg[1]; 200 }; 201 202 struct creation_info 203 { 204 u8 buildnum; /* e.g., 588 */ 205 u8 usec; /* e.g., 588 */ 206 u8 via; /* e.g., 1 = FSU, 207 * 2 = API 208 */ 209 u8 year; /* e.g., 1997 = 97 */ 210 __le32 date; /* 211 * unsigned Month :4; // 1 - 12 212 * unsigned Day :6; // 1 - 32 213 * unsigned Hour :6; // 0 - 23 214 * unsigned Minute :6; // 0 - 60 215 * unsigned Second :6; // 0 - 60 216 */ 217 __le32 serial[2]; /* e.g., 0x1DEADB0BFAFAF001 */ 218 }; 219 220 221 /* 222 * Define all the constants needed for the communication interface 223 */ 224 225 /* 226 * Define how many queue entries each queue will have and the total 227 * number of entries for the entire communication interface. Also define 228 * how many queues we support. 229 * 230 * This has to match the controller 231 */ 232 233 #define NUMBER_OF_COMM_QUEUES 8 // 4 command; 4 response 234 #define HOST_HIGH_CMD_ENTRIES 4 235 #define HOST_NORM_CMD_ENTRIES 8 236 #define ADAP_HIGH_CMD_ENTRIES 4 237 #define ADAP_NORM_CMD_ENTRIES 512 238 #define HOST_HIGH_RESP_ENTRIES 4 239 #define HOST_NORM_RESP_ENTRIES 512 240 #define ADAP_HIGH_RESP_ENTRIES 4 241 #define ADAP_NORM_RESP_ENTRIES 8 242 243 #define TOTAL_QUEUE_ENTRIES \ 244 (HOST_NORM_CMD_ENTRIES + HOST_HIGH_CMD_ENTRIES + ADAP_NORM_CMD_ENTRIES + ADAP_HIGH_CMD_ENTRIES + \ 245 HOST_NORM_RESP_ENTRIES + HOST_HIGH_RESP_ENTRIES + ADAP_NORM_RESP_ENTRIES + ADAP_HIGH_RESP_ENTRIES) 246 247 248 /* 249 * Set the queues on a 16 byte alignment 250 */ 251 252 #define QUEUE_ALIGNMENT 16 253 254 /* 255 * The queue headers define the Communication Region queues. These 256 * are physically contiguous and accessible by both the adapter and the 257 * host. Even though all queue headers are in the same contiguous block 258 * they will be represented as individual units in the data structures. 259 */ 260 261 struct aac_entry { 262 __le32 size; /* Size in bytes of Fib which this QE points to */ 263 __le32 addr; /* Receiver address of the FIB */ 264 }; 265 266 /* 267 * The adapter assumes the ProducerIndex and ConsumerIndex are grouped 268 * adjacently and in that order. 269 */ 270 271 struct aac_qhdr { 272 __le64 header_addr;/* Address to hand the adapter to access 273 to this queue head */ 274 __le32 *producer; /* The producer index for this queue (host address) */ 275 __le32 *consumer; /* The consumer index for this queue (host address) */ 276 }; 277 278 /* 279 * Define all the events which the adapter would like to notify 280 * the host of. 281 */ 282 283 #define HostNormCmdQue 1 /* Change in host normal priority command queue */ 284 #define HostHighCmdQue 2 /* Change in host high priority command queue */ 285 #define HostNormRespQue 3 /* Change in host normal priority response queue */ 286 #define HostHighRespQue 4 /* Change in host high priority response queue */ 287 #define AdapNormRespNotFull 5 288 #define AdapHighRespNotFull 6 289 #define AdapNormCmdNotFull 7 290 #define AdapHighCmdNotFull 8 291 #define SynchCommandComplete 9 292 #define AdapInternalError 0xfe /* The adapter detected an internal error shutting down */ 293 294 /* 295 * Define all the events the host wishes to notify the 296 * adapter of. The first four values much match the Qid the 297 * corresponding queue. 298 */ 299 300 #define AdapNormCmdQue 2 301 #define AdapHighCmdQue 3 302 #define AdapNormRespQue 6 303 #define AdapHighRespQue 7 304 #define HostShutdown 8 305 #define HostPowerFail 9 306 #define FatalCommError 10 307 #define HostNormRespNotFull 11 308 #define HostHighRespNotFull 12 309 #define HostNormCmdNotFull 13 310 #define HostHighCmdNotFull 14 311 #define FastIo 15 312 #define AdapPrintfDone 16 313 314 /* 315 * Define all the queues that the adapter and host use to communicate 316 * Number them to match the physical queue layout. 317 */ 318 319 enum aac_queue_types { 320 HostNormCmdQueue = 0, /* Adapter to host normal priority command traffic */ 321 HostHighCmdQueue, /* Adapter to host high priority command traffic */ 322 AdapNormCmdQueue, /* Host to adapter normal priority command traffic */ 323 AdapHighCmdQueue, /* Host to adapter high priority command traffic */ 324 HostNormRespQueue, /* Adapter to host normal priority response traffic */ 325 HostHighRespQueue, /* Adapter to host high priority response traffic */ 326 AdapNormRespQueue, /* Host to adapter normal priority response traffic */ 327 AdapHighRespQueue /* Host to adapter high priority response traffic */ 328 }; 329 330 /* 331 * Assign type values to the FSA communication data structures 332 */ 333 334 #define FIB_MAGIC 0x0001 335 #define FIB_MAGIC2 0x0004 336 #define FIB_MAGIC2_64 0x0005 337 338 /* 339 * Define the priority levels the FSA communication routines support. 340 */ 341 342 #define FsaNormal 1 343 344 /* transport FIB header (PMC) */ 345 struct aac_fib_xporthdr { 346 u64 HostAddress; /* FIB host address w/o xport header */ 347 u32 Size; /* FIB size excluding xport header */ 348 u32 Handle; /* driver handle to reference the FIB */ 349 u64 Reserved[2]; 350 }; 351 352 #define ALIGN32 32 353 354 /* 355 * Define the FIB. The FIB is the where all the requested data and 356 * command information are put to the application on the FSA adapter. 357 */ 358 359 struct aac_fibhdr { 360 __le32 XferState; /* Current transfer state for this CCB */ 361 __le16 Command; /* Routing information for the destination */ 362 u8 StructType; /* Type FIB */ 363 u8 Unused; /* Unused */ 364 __le16 Size; /* Size of this FIB in bytes */ 365 __le16 SenderSize; /* Size of the FIB in the sender 366 (for response sizing) */ 367 __le32 SenderFibAddress; /* Host defined data in the FIB */ 368 union { 369 __le32 ReceiverFibAddress;/* Logical address of this FIB for 370 the adapter (old) */ 371 __le32 SenderFibAddressHigh;/* upper 32bit of phys. FIB address */ 372 __le32 TimeStamp; /* otherwise timestamp for FW internal use */ 373 } u; 374 u32 Handle; /* FIB handle used for MSGU commnunication */ 375 u32 Previous; /* FW internal use */ 376 u32 Next; /* FW internal use */ 377 }; 378 379 struct hw_fib { 380 struct aac_fibhdr header; 381 u8 data[512-sizeof(struct aac_fibhdr)]; // Command specific data 382 }; 383 384 /* 385 * FIB commands 386 */ 387 388 #define TestCommandResponse 1 389 #define TestAdapterCommand 2 390 /* 391 * Lowlevel and comm commands 392 */ 393 #define LastTestCommand 100 394 #define ReinitHostNormCommandQueue 101 395 #define ReinitHostHighCommandQueue 102 396 #define ReinitHostHighRespQueue 103 397 #define ReinitHostNormRespQueue 104 398 #define ReinitAdapNormCommandQueue 105 399 #define ReinitAdapHighCommandQueue 107 400 #define ReinitAdapHighRespQueue 108 401 #define ReinitAdapNormRespQueue 109 402 #define InterfaceShutdown 110 403 #define DmaCommandFib 120 404 #define StartProfile 121 405 #define TermProfile 122 406 #define SpeedTest 123 407 #define TakeABreakPt 124 408 #define RequestPerfData 125 409 #define SetInterruptDefTimer 126 410 #define SetInterruptDefCount 127 411 #define GetInterruptDefStatus 128 412 #define LastCommCommand 129 413 /* 414 * Filesystem commands 415 */ 416 #define NuFileSystem 300 417 #define UFS 301 418 #define HostFileSystem 302 419 #define LastFileSystemCommand 303 420 /* 421 * Container Commands 422 */ 423 #define ContainerCommand 500 424 #define ContainerCommand64 501 425 #define ContainerRawIo 502 426 #define ContainerRawIo2 503 427 /* 428 * Scsi Port commands (scsi passthrough) 429 */ 430 #define ScsiPortCommand 600 431 #define ScsiPortCommand64 601 432 /* 433 * Misc house keeping and generic adapter initiated commands 434 */ 435 #define AifRequest 700 436 #define CheckRevision 701 437 #define FsaHostShutdown 702 438 #define RequestAdapterInfo 703 439 #define IsAdapterPaused 704 440 #define SendHostTime 705 441 #define RequestSupplementAdapterInfo 706 442 #define LastMiscCommand 707 443 444 /* 445 * Commands that will target the failover level on the FSA adapter 446 */ 447 448 enum fib_xfer_state { 449 HostOwned = (1<<0), 450 AdapterOwned = (1<<1), 451 FibInitialized = (1<<2), 452 FibEmpty = (1<<3), 453 AllocatedFromPool = (1<<4), 454 SentFromHost = (1<<5), 455 SentFromAdapter = (1<<6), 456 ResponseExpected = (1<<7), 457 NoResponseExpected = (1<<8), 458 AdapterProcessed = (1<<9), 459 HostProcessed = (1<<10), 460 HighPriority = (1<<11), 461 NormalPriority = (1<<12), 462 Async = (1<<13), 463 AsyncIo = (1<<13), // rpbfix: remove with new regime 464 PageFileIo = (1<<14), // rpbfix: remove with new regime 465 ShutdownRequest = (1<<15), 466 LazyWrite = (1<<16), // rpbfix: remove with new regime 467 AdapterMicroFib = (1<<17), 468 BIOSFibPath = (1<<18), 469 FastResponseCapable = (1<<19), 470 ApiFib = (1<<20), /* Its an API Fib */ 471 /* PMC NEW COMM: There is no more AIF data pending */ 472 NoMoreAifDataAvailable = (1<<21) 473 }; 474 475 /* 476 * The following defines needs to be updated any time there is an 477 * incompatible change made to the aac_init structure. 478 */ 479 480 #define ADAPTER_INIT_STRUCT_REVISION 3 481 #define ADAPTER_INIT_STRUCT_REVISION_4 4 // rocket science 482 #define ADAPTER_INIT_STRUCT_REVISION_6 6 /* PMC src */ 483 #define ADAPTER_INIT_STRUCT_REVISION_7 7 /* Denali */ 484 485 struct aac_init 486 { 487 __le32 InitStructRevision; 488 __le32 Sa_MSIXVectors; 489 __le32 fsrev; 490 __le32 CommHeaderAddress; 491 __le32 FastIoCommAreaAddress; 492 __le32 AdapterFibsPhysicalAddress; 493 __le32 AdapterFibsVirtualAddress; 494 __le32 AdapterFibsSize; 495 __le32 AdapterFibAlign; 496 __le32 printfbuf; 497 __le32 printfbufsiz; 498 __le32 HostPhysMemPages; /* number of 4k pages of host 499 physical memory */ 500 __le32 HostElapsedSeconds; /* number of seconds since 1970. */ 501 /* 502 * ADAPTER_INIT_STRUCT_REVISION_4 begins here 503 */ 504 __le32 InitFlags; /* flags for supported features */ 505 #define INITFLAGS_NEW_COMM_SUPPORTED 0x00000001 506 #define INITFLAGS_DRIVER_USES_UTC_TIME 0x00000010 507 #define INITFLAGS_DRIVER_SUPPORTS_PM 0x00000020 508 #define INITFLAGS_NEW_COMM_TYPE1_SUPPORTED 0x00000040 509 #define INITFLAGS_FAST_JBOD_SUPPORTED 0x00000080 510 #define INITFLAGS_NEW_COMM_TYPE2_SUPPORTED 0x00000100 511 __le32 MaxIoCommands; /* max outstanding commands */ 512 __le32 MaxIoSize; /* largest I/O command */ 513 __le32 MaxFibSize; /* largest FIB to adapter */ 514 /* ADAPTER_INIT_STRUCT_REVISION_5 begins here */ 515 __le32 MaxNumAif; /* max number of aif */ 516 /* ADAPTER_INIT_STRUCT_REVISION_6 begins here */ 517 __le32 HostRRQ_AddrLow; 518 __le32 HostRRQ_AddrHigh; /* Host RRQ (response queue) for SRC */ 519 }; 520 521 enum aac_log_level { 522 LOG_AAC_INIT = 10, 523 LOG_AAC_INFORMATIONAL = 20, 524 LOG_AAC_WARNING = 30, 525 LOG_AAC_LOW_ERROR = 40, 526 LOG_AAC_MEDIUM_ERROR = 50, 527 LOG_AAC_HIGH_ERROR = 60, 528 LOG_AAC_PANIC = 70, 529 LOG_AAC_DEBUG = 80, 530 LOG_AAC_WINDBG_PRINT = 90 531 }; 532 533 #define FSAFS_NTC_GET_ADAPTER_FIB_CONTEXT 0x030b 534 #define FSAFS_NTC_FIB_CONTEXT 0x030c 535 536 struct aac_dev; 537 struct fib; 538 struct scsi_cmnd; 539 540 struct adapter_ops 541 { 542 /* Low level operations */ 543 void (*adapter_interrupt)(struct aac_dev *dev); 544 void (*adapter_notify)(struct aac_dev *dev, u32 event); 545 void (*adapter_disable_int)(struct aac_dev *dev); 546 void (*adapter_enable_int)(struct aac_dev *dev); 547 int (*adapter_sync_cmd)(struct aac_dev *dev, u32 command, u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, u32 *status, u32 *r1, u32 *r2, u32 *r3, u32 *r4); 548 int (*adapter_check_health)(struct aac_dev *dev); 549 int (*adapter_restart)(struct aac_dev *dev, int bled); 550 void (*adapter_start)(struct aac_dev *dev); 551 /* Transport operations */ 552 int (*adapter_ioremap)(struct aac_dev * dev, u32 size); 553 irq_handler_t adapter_intr; 554 /* Packet operations */ 555 int (*adapter_deliver)(struct fib * fib); 556 int (*adapter_bounds)(struct aac_dev * dev, struct scsi_cmnd * cmd, u64 lba); 557 int (*adapter_read)(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count); 558 int (*adapter_write)(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count, int fua); 559 int (*adapter_scsi)(struct fib * fib, struct scsi_cmnd * cmd); 560 /* Administrative operations */ 561 int (*adapter_comm)(struct aac_dev * dev, int comm); 562 }; 563 564 /* 565 * Define which interrupt handler needs to be installed 566 */ 567 568 struct aac_driver_ident 569 { 570 int (*init)(struct aac_dev *dev); 571 char * name; 572 char * vname; 573 char * model; 574 u16 channels; 575 int quirks; 576 }; 577 /* 578 * Some adapter firmware needs communication memory 579 * below 2gig. This tells the init function to set the 580 * dma mask such that fib memory will be allocated where the 581 * adapter firmware can get to it. 582 */ 583 #define AAC_QUIRK_31BIT 0x0001 584 585 /* 586 * Some adapter firmware, when the raid card's cache is turned off, can not 587 * split up scatter gathers in order to deal with the limits of the 588 * underlying CHIM. This limit is 34 scatter gather elements. 589 */ 590 #define AAC_QUIRK_34SG 0x0002 591 592 /* 593 * This adapter is a slave (no Firmware) 594 */ 595 #define AAC_QUIRK_SLAVE 0x0004 596 597 /* 598 * This adapter is a master. 599 */ 600 #define AAC_QUIRK_MASTER 0x0008 601 602 /* 603 * Some adapter firmware perform poorly when it must split up scatter gathers 604 * in order to deal with the limits of the underlying CHIM. This limit in this 605 * class of adapters is 17 scatter gather elements. 606 */ 607 #define AAC_QUIRK_17SG 0x0010 608 609 /* 610 * Some adapter firmware does not support 64 bit scsi passthrough 611 * commands. 612 */ 613 #define AAC_QUIRK_SCSI_32 0x0020 614 615 /* 616 * The adapter interface specs all queues to be located in the same 617 * physically contiguous block. The host structure that defines the 618 * commuication queues will assume they are each a separate physically 619 * contiguous memory region that will support them all being one big 620 * contiguous block. 621 * There is a command and response queue for each level and direction of 622 * commuication. These regions are accessed by both the host and adapter. 623 */ 624 625 struct aac_queue { 626 u64 logical; /*address we give the adapter */ 627 struct aac_entry *base; /*system virtual address */ 628 struct aac_qhdr headers; /*producer,consumer q headers*/ 629 u32 entries; /*Number of queue entries */ 630 wait_queue_head_t qfull; /*Event to wait on if q full */ 631 wait_queue_head_t cmdready; /*Cmd ready from the adapter */ 632 /* This is only valid for adapter to host command queues. */ 633 spinlock_t *lock; /* Spinlock for this queue must take this lock before accessing the lock */ 634 spinlock_t lockdata; /* Actual lock (used only on one side of the lock) */ 635 struct list_head cmdq; /* A queue of FIBs which need to be prcessed by the FS thread. This is */ 636 /* only valid for command queues which receive entries from the adapter. */ 637 /* Number of entries on outstanding queue. */ 638 atomic_t numpending; 639 struct aac_dev * dev; /* Back pointer to adapter structure */ 640 }; 641 642 /* 643 * Message queues. The order here is important, see also the 644 * queue type ordering 645 */ 646 647 struct aac_queue_block 648 { 649 struct aac_queue queue[8]; 650 }; 651 652 /* 653 * SaP1 Message Unit Registers 654 */ 655 656 struct sa_drawbridge_CSR { 657 /* Offset | Name */ 658 __le32 reserved[10]; /* 00h-27h | Reserved */ 659 u8 LUT_Offset; /* 28h | Lookup Table Offset */ 660 u8 reserved1[3]; /* 29h-2bh | Reserved */ 661 __le32 LUT_Data; /* 2ch | Looup Table Data */ 662 __le32 reserved2[26]; /* 30h-97h | Reserved */ 663 __le16 PRICLEARIRQ; /* 98h | Primary Clear Irq */ 664 __le16 SECCLEARIRQ; /* 9ah | Secondary Clear Irq */ 665 __le16 PRISETIRQ; /* 9ch | Primary Set Irq */ 666 __le16 SECSETIRQ; /* 9eh | Secondary Set Irq */ 667 __le16 PRICLEARIRQMASK;/* a0h | Primary Clear Irq Mask */ 668 __le16 SECCLEARIRQMASK;/* a2h | Secondary Clear Irq Mask */ 669 __le16 PRISETIRQMASK; /* a4h | Primary Set Irq Mask */ 670 __le16 SECSETIRQMASK; /* a6h | Secondary Set Irq Mask */ 671 __le32 MAILBOX0; /* a8h | Scratchpad 0 */ 672 __le32 MAILBOX1; /* ach | Scratchpad 1 */ 673 __le32 MAILBOX2; /* b0h | Scratchpad 2 */ 674 __le32 MAILBOX3; /* b4h | Scratchpad 3 */ 675 __le32 MAILBOX4; /* b8h | Scratchpad 4 */ 676 __le32 MAILBOX5; /* bch | Scratchpad 5 */ 677 __le32 MAILBOX6; /* c0h | Scratchpad 6 */ 678 __le32 MAILBOX7; /* c4h | Scratchpad 7 */ 679 __le32 ROM_Setup_Data; /* c8h | Rom Setup and Data */ 680 __le32 ROM_Control_Addr;/* cch | Rom Control and Address */ 681 __le32 reserved3[12]; /* d0h-ffh | reserved */ 682 __le32 LUT[64]; /* 100h-1ffh | Lookup Table Entries */ 683 }; 684 685 #define Mailbox0 SaDbCSR.MAILBOX0 686 #define Mailbox1 SaDbCSR.MAILBOX1 687 #define Mailbox2 SaDbCSR.MAILBOX2 688 #define Mailbox3 SaDbCSR.MAILBOX3 689 #define Mailbox4 SaDbCSR.MAILBOX4 690 #define Mailbox5 SaDbCSR.MAILBOX5 691 #define Mailbox6 SaDbCSR.MAILBOX6 692 #define Mailbox7 SaDbCSR.MAILBOX7 693 694 #define DoorbellReg_p SaDbCSR.PRISETIRQ 695 #define DoorbellReg_s SaDbCSR.SECSETIRQ 696 #define DoorbellClrReg_p SaDbCSR.PRICLEARIRQ 697 698 699 #define DOORBELL_0 0x0001 700 #define DOORBELL_1 0x0002 701 #define DOORBELL_2 0x0004 702 #define DOORBELL_3 0x0008 703 #define DOORBELL_4 0x0010 704 #define DOORBELL_5 0x0020 705 #define DOORBELL_6 0x0040 706 707 708 #define PrintfReady DOORBELL_5 709 #define PrintfDone DOORBELL_5 710 711 struct sa_registers { 712 struct sa_drawbridge_CSR SaDbCSR; /* 98h - c4h */ 713 }; 714 715 716 #define Sa_MINIPORT_REVISION 1 717 718 #define sa_readw(AEP, CSR) readl(&((AEP)->regs.sa->CSR)) 719 #define sa_readl(AEP, CSR) readl(&((AEP)->regs.sa->CSR)) 720 #define sa_writew(AEP, CSR, value) writew(value, &((AEP)->regs.sa->CSR)) 721 #define sa_writel(AEP, CSR, value) writel(value, &((AEP)->regs.sa->CSR)) 722 723 /* 724 * Rx Message Unit Registers 725 */ 726 727 struct rx_mu_registers { 728 /* Local | PCI*| Name */ 729 __le32 ARSR; /* 1300h | 00h | APIC Register Select Register */ 730 __le32 reserved0; /* 1304h | 04h | Reserved */ 731 __le32 AWR; /* 1308h | 08h | APIC Window Register */ 732 __le32 reserved1; /* 130Ch | 0Ch | Reserved */ 733 __le32 IMRx[2]; /* 1310h | 10h | Inbound Message Registers */ 734 __le32 OMRx[2]; /* 1318h | 18h | Outbound Message Registers */ 735 __le32 IDR; /* 1320h | 20h | Inbound Doorbell Register */ 736 __le32 IISR; /* 1324h | 24h | Inbound Interrupt 737 Status Register */ 738 __le32 IIMR; /* 1328h | 28h | Inbound Interrupt 739 Mask Register */ 740 __le32 ODR; /* 132Ch | 2Ch | Outbound Doorbell Register */ 741 __le32 OISR; /* 1330h | 30h | Outbound Interrupt 742 Status Register */ 743 __le32 OIMR; /* 1334h | 34h | Outbound Interrupt 744 Mask Register */ 745 __le32 reserved2; /* 1338h | 38h | Reserved */ 746 __le32 reserved3; /* 133Ch | 3Ch | Reserved */ 747 __le32 InboundQueue;/* 1340h | 40h | Inbound Queue Port relative to firmware */ 748 __le32 OutboundQueue;/*1344h | 44h | Outbound Queue Port relative to firmware */ 749 /* * Must access through ATU Inbound 750 Translation Window */ 751 }; 752 753 struct rx_inbound { 754 __le32 Mailbox[8]; 755 }; 756 757 #define INBOUNDDOORBELL_0 0x00000001 758 #define INBOUNDDOORBELL_1 0x00000002 759 #define INBOUNDDOORBELL_2 0x00000004 760 #define INBOUNDDOORBELL_3 0x00000008 761 #define INBOUNDDOORBELL_4 0x00000010 762 #define INBOUNDDOORBELL_5 0x00000020 763 #define INBOUNDDOORBELL_6 0x00000040 764 765 #define OUTBOUNDDOORBELL_0 0x00000001 766 #define OUTBOUNDDOORBELL_1 0x00000002 767 #define OUTBOUNDDOORBELL_2 0x00000004 768 #define OUTBOUNDDOORBELL_3 0x00000008 769 #define OUTBOUNDDOORBELL_4 0x00000010 770 771 #define InboundDoorbellReg MUnit.IDR 772 #define OutboundDoorbellReg MUnit.ODR 773 774 struct rx_registers { 775 struct rx_mu_registers MUnit; /* 1300h - 1347h */ 776 __le32 reserved1[2]; /* 1348h - 134ch */ 777 struct rx_inbound IndexRegs; 778 }; 779 780 #define rx_readb(AEP, CSR) readb(&((AEP)->regs.rx->CSR)) 781 #define rx_readl(AEP, CSR) readl(&((AEP)->regs.rx->CSR)) 782 #define rx_writeb(AEP, CSR, value) writeb(value, &((AEP)->regs.rx->CSR)) 783 #define rx_writel(AEP, CSR, value) writel(value, &((AEP)->regs.rx->CSR)) 784 785 /* 786 * Rkt Message Unit Registers (same as Rx, except a larger reserve region) 787 */ 788 789 #define rkt_mu_registers rx_mu_registers 790 #define rkt_inbound rx_inbound 791 792 struct rkt_registers { 793 struct rkt_mu_registers MUnit; /* 1300h - 1347h */ 794 __le32 reserved1[1006]; /* 1348h - 22fch */ 795 struct rkt_inbound IndexRegs; /* 2300h - */ 796 }; 797 798 #define rkt_readb(AEP, CSR) readb(&((AEP)->regs.rkt->CSR)) 799 #define rkt_readl(AEP, CSR) readl(&((AEP)->regs.rkt->CSR)) 800 #define rkt_writeb(AEP, CSR, value) writeb(value, &((AEP)->regs.rkt->CSR)) 801 #define rkt_writel(AEP, CSR, value) writel(value, &((AEP)->regs.rkt->CSR)) 802 803 /* 804 * PMC SRC message unit registers 805 */ 806 807 #define src_inbound rx_inbound 808 809 struct src_mu_registers { 810 /* PCI*| Name */ 811 __le32 reserved0[6]; /* 00h | Reserved */ 812 __le32 IOAR[2]; /* 18h | IOA->host interrupt register */ 813 __le32 IDR; /* 20h | Inbound Doorbell Register */ 814 __le32 IISR; /* 24h | Inbound Int. Status Register */ 815 __le32 reserved1[3]; /* 28h | Reserved */ 816 __le32 OIMR; /* 34h | Outbound Int. Mask Register */ 817 __le32 reserved2[25]; /* 38h | Reserved */ 818 __le32 ODR_R; /* 9ch | Outbound Doorbell Read */ 819 __le32 ODR_C; /* a0h | Outbound Doorbell Clear */ 820 __le32 reserved3[6]; /* a4h | Reserved */ 821 __le32 OMR; /* bch | Outbound Message Register */ 822 __le32 IQ_L; /* c0h | Inbound Queue (Low address) */ 823 __le32 IQ_H; /* c4h | Inbound Queue (High address) */ 824 __le32 ODR_MSI; /* c8h | MSI register for sync./AIF */ 825 }; 826 827 struct src_registers { 828 struct src_mu_registers MUnit; /* 00h - cbh */ 829 union { 830 struct { 831 __le32 reserved1[130789]; /* cch - 7fc5fh */ 832 struct src_inbound IndexRegs; /* 7fc60h */ 833 } tupelo; 834 struct { 835 __le32 reserved1[973]; /* cch - fffh */ 836 struct src_inbound IndexRegs; /* 1000h */ 837 } denali; 838 } u; 839 }; 840 841 #define src_readb(AEP, CSR) readb(&((AEP)->regs.src.bar0->CSR)) 842 #define src_readl(AEP, CSR) readl(&((AEP)->regs.src.bar0->CSR)) 843 #define src_writeb(AEP, CSR, value) writeb(value, \ 844 &((AEP)->regs.src.bar0->CSR)) 845 #define src_writel(AEP, CSR, value) writel(value, \ 846 &((AEP)->regs.src.bar0->CSR)) 847 #if defined(writeq) 848 #define src_writeq(AEP, CSR, value) writeq(value, \ 849 &((AEP)->regs.src.bar0->CSR)) 850 #endif 851 852 #define SRC_ODR_SHIFT 12 853 #define SRC_IDR_SHIFT 9 854 855 typedef void (*fib_callback)(void *ctxt, struct fib *fibctx); 856 857 struct aac_fib_context { 858 s16 type; // used for verification of structure 859 s16 size; 860 u32 unique; // unique value representing this context 861 ulong jiffies; // used for cleanup - dmb changed to ulong 862 struct list_head next; // used to link context's into a linked list 863 struct semaphore wait_sem; // this is used to wait for the next fib to arrive. 864 int wait; // Set to true when thread is in WaitForSingleObject 865 unsigned long count; // total number of FIBs on FibList 866 struct list_head fib_list; // this holds fibs and their attachd hw_fibs 867 }; 868 869 struct sense_data { 870 u8 error_code; /* 70h (current errors), 71h(deferred errors) */ 871 u8 valid:1; /* A valid bit of one indicates that the information */ 872 /* field contains valid information as defined in the 873 * SCSI-2 Standard. 874 */ 875 u8 segment_number; /* Only used for COPY, COMPARE, or COPY AND VERIFY Commands */ 876 u8 sense_key:4; /* Sense Key */ 877 u8 reserved:1; 878 u8 ILI:1; /* Incorrect Length Indicator */ 879 u8 EOM:1; /* End Of Medium - reserved for random access devices */ 880 u8 filemark:1; /* Filemark - reserved for random access devices */ 881 882 u8 information[4]; /* for direct-access devices, contains the unsigned 883 * logical block address or residue associated with 884 * the sense key 885 */ 886 u8 add_sense_len; /* number of additional sense bytes to follow this field */ 887 u8 cmnd_info[4]; /* not used */ 888 u8 ASC; /* Additional Sense Code */ 889 u8 ASCQ; /* Additional Sense Code Qualifier */ 890 u8 FRUC; /* Field Replaceable Unit Code - not used */ 891 u8 bit_ptr:3; /* indicates which byte of the CDB or parameter data 892 * was in error 893 */ 894 u8 BPV:1; /* bit pointer valid (BPV): 1- indicates that 895 * the bit_ptr field has valid value 896 */ 897 u8 reserved2:2; 898 u8 CD:1; /* command data bit: 1- illegal parameter in CDB. 899 * 0- illegal parameter in data. 900 */ 901 u8 SKSV:1; 902 u8 field_ptr[2]; /* byte of the CDB or parameter data in error */ 903 }; 904 905 struct fsa_dev_info { 906 u64 last; 907 u64 size; 908 u32 type; 909 u32 config_waiting_on; 910 unsigned long config_waiting_stamp; 911 u16 queue_depth; 912 u8 config_needed; 913 u8 valid; 914 u8 ro; 915 u8 locked; 916 u8 deleted; 917 char devname[8]; 918 struct sense_data sense_data; 919 u32 block_size; 920 }; 921 922 struct fib { 923 void *next; /* this is used by the allocator */ 924 s16 type; 925 s16 size; 926 /* 927 * The Adapter that this I/O is destined for. 928 */ 929 struct aac_dev *dev; 930 /* 931 * This is the event the sendfib routine will wait on if the 932 * caller did not pass one and this is synch io. 933 */ 934 struct semaphore event_wait; 935 spinlock_t event_lock; 936 937 u32 done; /* gets set to 1 when fib is complete */ 938 fib_callback callback; 939 void *callback_data; 940 u32 flags; // u32 dmb was ulong 941 /* 942 * And for the internal issue/reply queues (we may be able 943 * to merge these two) 944 */ 945 struct list_head fiblink; 946 void *data; 947 struct hw_fib *hw_fib_va; /* Actual shared object */ 948 dma_addr_t hw_fib_pa; /* physical address of hw_fib*/ 949 }; 950 951 /* 952 * Adapter Information Block 953 * 954 * This is returned by the RequestAdapterInfo block 955 */ 956 957 struct aac_adapter_info 958 { 959 __le32 platform; 960 __le32 cpu; 961 __le32 subcpu; 962 __le32 clock; 963 __le32 execmem; 964 __le32 buffermem; 965 __le32 totalmem; 966 __le32 kernelrev; 967 __le32 kernelbuild; 968 __le32 monitorrev; 969 __le32 monitorbuild; 970 __le32 hwrev; 971 __le32 hwbuild; 972 __le32 biosrev; 973 __le32 biosbuild; 974 __le32 cluster; 975 __le32 clusterchannelmask; 976 __le32 serial[2]; 977 __le32 battery; 978 __le32 options; 979 __le32 OEM; 980 }; 981 982 struct aac_supplement_adapter_info 983 { 984 u8 AdapterTypeText[17+1]; 985 u8 Pad[2]; 986 __le32 FlashMemoryByteSize; 987 __le32 FlashImageId; 988 __le32 MaxNumberPorts; 989 __le32 Version; 990 __le32 FeatureBits; 991 u8 SlotNumber; 992 u8 ReservedPad0[3]; 993 u8 BuildDate[12]; 994 __le32 CurrentNumberPorts; 995 struct { 996 u8 AssemblyPn[8]; 997 u8 FruPn[8]; 998 u8 BatteryFruPn[8]; 999 u8 EcVersionString[8]; 1000 u8 Tsid[12]; 1001 } VpdInfo; 1002 __le32 FlashFirmwareRevision; 1003 __le32 FlashFirmwareBuild; 1004 __le32 RaidTypeMorphOptions; 1005 __le32 FlashFirmwareBootRevision; 1006 __le32 FlashFirmwareBootBuild; 1007 u8 MfgPcbaSerialNo[12]; 1008 u8 MfgWWNName[8]; 1009 __le32 SupportedOptions2; 1010 __le32 StructExpansion; 1011 /* StructExpansion == 1 */ 1012 __le32 FeatureBits3; 1013 __le32 SupportedPerformanceModes; 1014 __le32 ReservedForFutureGrowth[80]; 1015 }; 1016 #define AAC_FEATURE_FALCON cpu_to_le32(0x00000010) 1017 #define AAC_FEATURE_JBOD cpu_to_le32(0x08000000) 1018 /* SupportedOptions2 */ 1019 #define AAC_OPTION_MU_RESET cpu_to_le32(0x00000001) 1020 #define AAC_OPTION_IGNORE_RESET cpu_to_le32(0x00000002) 1021 #define AAC_OPTION_POWER_MANAGEMENT cpu_to_le32(0x00000004) 1022 #define AAC_OPTION_DOORBELL_RESET cpu_to_le32(0x00004000) 1023 /* 4KB sector size */ 1024 #define AAC_OPTION_VARIABLE_BLOCK_SIZE cpu_to_le32(0x00040000) 1025 /* 240 simple volume support */ 1026 #define AAC_OPTION_SUPPORTED_240_VOLUMES cpu_to_le32(0x10000000) 1027 #define AAC_SIS_VERSION_V3 3 1028 #define AAC_SIS_SLOT_UNKNOWN 0xFF 1029 1030 #define GetBusInfo 0x00000009 1031 struct aac_bus_info { 1032 __le32 Command; /* VM_Ioctl */ 1033 __le32 ObjType; /* FT_DRIVE */ 1034 __le32 MethodId; /* 1 = SCSI Layer */ 1035 __le32 ObjectId; /* Handle */ 1036 __le32 CtlCmd; /* GetBusInfo */ 1037 }; 1038 1039 struct aac_bus_info_response { 1040 __le32 Status; /* ST_OK */ 1041 __le32 ObjType; 1042 __le32 MethodId; /* unused */ 1043 __le32 ObjectId; /* unused */ 1044 __le32 CtlCmd; /* unused */ 1045 __le32 ProbeComplete; 1046 __le32 BusCount; 1047 __le32 TargetsPerBus; 1048 u8 InitiatorBusId[10]; 1049 u8 BusValid[10]; 1050 }; 1051 1052 /* 1053 * Battery platforms 1054 */ 1055 #define AAC_BAT_REQ_PRESENT (1) 1056 #define AAC_BAT_REQ_NOTPRESENT (2) 1057 #define AAC_BAT_OPT_PRESENT (3) 1058 #define AAC_BAT_OPT_NOTPRESENT (4) 1059 #define AAC_BAT_NOT_SUPPORTED (5) 1060 /* 1061 * cpu types 1062 */ 1063 #define AAC_CPU_SIMULATOR (1) 1064 #define AAC_CPU_I960 (2) 1065 #define AAC_CPU_STRONGARM (3) 1066 1067 /* 1068 * Supported Options 1069 */ 1070 #define AAC_OPT_SNAPSHOT cpu_to_le32(1) 1071 #define AAC_OPT_CLUSTERS cpu_to_le32(1<<1) 1072 #define AAC_OPT_WRITE_CACHE cpu_to_le32(1<<2) 1073 #define AAC_OPT_64BIT_DATA cpu_to_le32(1<<3) 1074 #define AAC_OPT_HOST_TIME_FIB cpu_to_le32(1<<4) 1075 #define AAC_OPT_RAID50 cpu_to_le32(1<<5) 1076 #define AAC_OPT_4GB_WINDOW cpu_to_le32(1<<6) 1077 #define AAC_OPT_SCSI_UPGRADEABLE cpu_to_le32(1<<7) 1078 #define AAC_OPT_SOFT_ERR_REPORT cpu_to_le32(1<<8) 1079 #define AAC_OPT_SUPPORTED_RECONDITION cpu_to_le32(1<<9) 1080 #define AAC_OPT_SGMAP_HOST64 cpu_to_le32(1<<10) 1081 #define AAC_OPT_ALARM cpu_to_le32(1<<11) 1082 #define AAC_OPT_NONDASD cpu_to_le32(1<<12) 1083 #define AAC_OPT_SCSI_MANAGED cpu_to_le32(1<<13) 1084 #define AAC_OPT_RAID_SCSI_MODE cpu_to_le32(1<<14) 1085 #define AAC_OPT_SUPPLEMENT_ADAPTER_INFO cpu_to_le32(1<<16) 1086 #define AAC_OPT_NEW_COMM cpu_to_le32(1<<17) 1087 #define AAC_OPT_NEW_COMM_64 cpu_to_le32(1<<18) 1088 #define AAC_OPT_NEW_COMM_TYPE1 cpu_to_le32(1<<28) 1089 #define AAC_OPT_NEW_COMM_TYPE2 cpu_to_le32(1<<29) 1090 #define AAC_OPT_NEW_COMM_TYPE3 cpu_to_le32(1<<30) 1091 #define AAC_OPT_NEW_COMM_TYPE4 cpu_to_le32(1<<31) 1092 1093 /* MSIX context */ 1094 struct aac_msix_ctx { 1095 int vector_no; 1096 struct aac_dev *dev; 1097 }; 1098 1099 struct aac_dev 1100 { 1101 struct list_head entry; 1102 const char *name; 1103 int id; 1104 1105 /* 1106 * negotiated FIB settings 1107 */ 1108 unsigned max_fib_size; 1109 unsigned sg_tablesize; 1110 unsigned max_num_aif; 1111 1112 /* 1113 * Map for 128 fib objects (64k) 1114 */ 1115 dma_addr_t hw_fib_pa; 1116 struct hw_fib *hw_fib_va; 1117 struct hw_fib *aif_base_va; 1118 /* 1119 * Fib Headers 1120 */ 1121 struct fib *fibs; 1122 1123 struct fib *free_fib; 1124 spinlock_t fib_lock; 1125 1126 struct aac_queue_block *queues; 1127 /* 1128 * The user API will use an IOCTL to register itself to receive 1129 * FIBs from the adapter. The following list is used to keep 1130 * track of all the threads that have requested these FIBs. The 1131 * mutex is used to synchronize access to all data associated 1132 * with the adapter fibs. 1133 */ 1134 struct list_head fib_list; 1135 1136 struct adapter_ops a_ops; 1137 unsigned long fsrev; /* Main driver's revision number */ 1138 1139 resource_size_t base_start; /* main IO base */ 1140 resource_size_t dbg_base; /* address of UART 1141 * debug buffer */ 1142 1143 resource_size_t base_size, dbg_size; /* Size of 1144 * mapped in region */ 1145 1146 struct aac_init *init; /* Holds initialization info to communicate with adapter */ 1147 dma_addr_t init_pa; /* Holds physical address of the init struct */ 1148 1149 u32 *host_rrq; /* response queue 1150 * if AAC_COMM_MESSAGE_TYPE1 */ 1151 1152 dma_addr_t host_rrq_pa; /* phys. address */ 1153 /* index into rrq buffer */ 1154 u32 host_rrq_idx[AAC_MAX_MSIX]; 1155 atomic_t rrq_outstanding[AAC_MAX_MSIX]; 1156 u32 fibs_pushed_no; 1157 struct pci_dev *pdev; /* Our PCI interface */ 1158 void * printfbuf; /* pointer to buffer used for printf's from the adapter */ 1159 void * comm_addr; /* Base address of Comm area */ 1160 dma_addr_t comm_phys; /* Physical Address of Comm area */ 1161 size_t comm_size; 1162 1163 struct Scsi_Host *scsi_host_ptr; 1164 int maximum_num_containers; 1165 int maximum_num_physicals; 1166 int maximum_num_channels; 1167 struct fsa_dev_info *fsa_dev; 1168 struct task_struct *thread; 1169 int cardtype; 1170 /* 1171 *This lock will protect the two 32-bit 1172 *writes to the Inbound Queue 1173 */ 1174 spinlock_t iq_lock; 1175 1176 /* 1177 * The following is the device specific extension. 1178 */ 1179 #ifndef AAC_MIN_FOOTPRINT_SIZE 1180 # define AAC_MIN_FOOTPRINT_SIZE 8192 1181 # define AAC_MIN_SRC_BAR0_SIZE 0x400000 1182 # define AAC_MIN_SRC_BAR1_SIZE 0x800 1183 # define AAC_MIN_SRCV_BAR0_SIZE 0x100000 1184 # define AAC_MIN_SRCV_BAR1_SIZE 0x400 1185 #endif 1186 union 1187 { 1188 struct sa_registers __iomem *sa; 1189 struct rx_registers __iomem *rx; 1190 struct rkt_registers __iomem *rkt; 1191 struct { 1192 struct src_registers __iomem *bar0; 1193 char __iomem *bar1; 1194 } src; 1195 } regs; 1196 volatile void __iomem *base, *dbg_base_mapped; 1197 volatile struct rx_inbound __iomem *IndexRegs; 1198 u32 OIMR; /* Mask Register Cache */ 1199 /* 1200 * AIF thread states 1201 */ 1202 u32 aif_thread; 1203 struct aac_adapter_info adapter_info; 1204 struct aac_supplement_adapter_info supplement_adapter_info; 1205 /* These are in adapter info but they are in the io flow so 1206 * lets break them out so we don't have to do an AND to check them 1207 */ 1208 u8 nondasd_support; 1209 u8 jbod; 1210 u8 cache_protected; 1211 u8 dac_support; 1212 u8 needs_dac; 1213 u8 raid_scsi_mode; 1214 u8 comm_interface; 1215 # define AAC_COMM_PRODUCER 0 1216 # define AAC_COMM_MESSAGE 1 1217 # define AAC_COMM_MESSAGE_TYPE1 3 1218 # define AAC_COMM_MESSAGE_TYPE2 4 1219 u8 raw_io_interface; 1220 u8 raw_io_64; 1221 u8 printf_enabled; 1222 u8 in_reset; 1223 u8 msi; 1224 int management_fib_count; 1225 spinlock_t manage_lock; 1226 spinlock_t sync_lock; 1227 int sync_mode; 1228 struct fib *sync_fib; 1229 struct list_head sync_fib_list; 1230 u32 doorbell_mask; 1231 u32 max_msix; /* max. MSI-X vectors */ 1232 u32 vector_cap; /* MSI-X vector capab.*/ 1233 int msi_enabled; /* MSI/MSI-X enabled */ 1234 struct msix_entry msixentry[AAC_MAX_MSIX]; 1235 struct aac_msix_ctx aac_msix[AAC_MAX_MSIX]; /* context */ 1236 u8 adapter_shutdown; 1237 }; 1238 1239 #define aac_adapter_interrupt(dev) \ 1240 (dev)->a_ops.adapter_interrupt(dev) 1241 1242 #define aac_adapter_notify(dev, event) \ 1243 (dev)->a_ops.adapter_notify(dev, event) 1244 1245 #define aac_adapter_disable_int(dev) \ 1246 (dev)->a_ops.adapter_disable_int(dev) 1247 1248 #define aac_adapter_enable_int(dev) \ 1249 (dev)->a_ops.adapter_enable_int(dev) 1250 1251 #define aac_adapter_sync_cmd(dev, command, p1, p2, p3, p4, p5, p6, status, r1, r2, r3, r4) \ 1252 (dev)->a_ops.adapter_sync_cmd(dev, command, p1, p2, p3, p4, p5, p6, status, r1, r2, r3, r4) 1253 1254 #define aac_adapter_check_health(dev) \ 1255 (dev)->a_ops.adapter_check_health(dev) 1256 1257 #define aac_adapter_restart(dev,bled) \ 1258 (dev)->a_ops.adapter_restart(dev,bled) 1259 1260 #define aac_adapter_start(dev) \ 1261 ((dev)->a_ops.adapter_start(dev)) 1262 1263 #define aac_adapter_ioremap(dev, size) \ 1264 (dev)->a_ops.adapter_ioremap(dev, size) 1265 1266 #define aac_adapter_deliver(fib) \ 1267 ((fib)->dev)->a_ops.adapter_deliver(fib) 1268 1269 #define aac_adapter_bounds(dev,cmd,lba) \ 1270 dev->a_ops.adapter_bounds(dev,cmd,lba) 1271 1272 #define aac_adapter_read(fib,cmd,lba,count) \ 1273 ((fib)->dev)->a_ops.adapter_read(fib,cmd,lba,count) 1274 1275 #define aac_adapter_write(fib,cmd,lba,count,fua) \ 1276 ((fib)->dev)->a_ops.adapter_write(fib,cmd,lba,count,fua) 1277 1278 #define aac_adapter_scsi(fib,cmd) \ 1279 ((fib)->dev)->a_ops.adapter_scsi(fib,cmd) 1280 1281 #define aac_adapter_comm(dev,comm) \ 1282 (dev)->a_ops.adapter_comm(dev, comm) 1283 1284 #define FIB_CONTEXT_FLAG_TIMED_OUT (0x00000001) 1285 #define FIB_CONTEXT_FLAG (0x00000002) 1286 #define FIB_CONTEXT_FLAG_WAIT (0x00000004) 1287 #define FIB_CONTEXT_FLAG_FASTRESP (0x00000008) 1288 1289 /* 1290 * Define the command values 1291 */ 1292 1293 #define Null 0 1294 #define GetAttributes 1 1295 #define SetAttributes 2 1296 #define Lookup 3 1297 #define ReadLink 4 1298 #define Read 5 1299 #define Write 6 1300 #define Create 7 1301 #define MakeDirectory 8 1302 #define SymbolicLink 9 1303 #define MakeNode 10 1304 #define Removex 11 1305 #define RemoveDirectoryx 12 1306 #define Rename 13 1307 #define Link 14 1308 #define ReadDirectory 15 1309 #define ReadDirectoryPlus 16 1310 #define FileSystemStatus 17 1311 #define FileSystemInfo 18 1312 #define PathConfigure 19 1313 #define Commit 20 1314 #define Mount 21 1315 #define UnMount 22 1316 #define Newfs 23 1317 #define FsCheck 24 1318 #define FsSync 25 1319 #define SimReadWrite 26 1320 #define SetFileSystemStatus 27 1321 #define BlockRead 28 1322 #define BlockWrite 29 1323 #define NvramIoctl 30 1324 #define FsSyncWait 31 1325 #define ClearArchiveBit 32 1326 #define SetAcl 33 1327 #define GetAcl 34 1328 #define AssignAcl 35 1329 #define FaultInsertion 36 /* Fault Insertion Command */ 1330 #define CrazyCache 37 /* Crazycache */ 1331 1332 #define MAX_FSACOMMAND_NUM 38 1333 1334 1335 /* 1336 * Define the status returns. These are very unixlike although 1337 * most are not in fact used 1338 */ 1339 1340 #define ST_OK 0 1341 #define ST_PERM 1 1342 #define ST_NOENT 2 1343 #define ST_IO 5 1344 #define ST_NXIO 6 1345 #define ST_E2BIG 7 1346 #define ST_ACCES 13 1347 #define ST_EXIST 17 1348 #define ST_XDEV 18 1349 #define ST_NODEV 19 1350 #define ST_NOTDIR 20 1351 #define ST_ISDIR 21 1352 #define ST_INVAL 22 1353 #define ST_FBIG 27 1354 #define ST_NOSPC 28 1355 #define ST_ROFS 30 1356 #define ST_MLINK 31 1357 #define ST_WOULDBLOCK 35 1358 #define ST_NAMETOOLONG 63 1359 #define ST_NOTEMPTY 66 1360 #define ST_DQUOT 69 1361 #define ST_STALE 70 1362 #define ST_REMOTE 71 1363 #define ST_NOT_READY 72 1364 #define ST_BADHANDLE 10001 1365 #define ST_NOT_SYNC 10002 1366 #define ST_BAD_COOKIE 10003 1367 #define ST_NOTSUPP 10004 1368 #define ST_TOOSMALL 10005 1369 #define ST_SERVERFAULT 10006 1370 #define ST_BADTYPE 10007 1371 #define ST_JUKEBOX 10008 1372 #define ST_NOTMOUNTED 10009 1373 #define ST_MAINTMODE 10010 1374 #define ST_STALEACL 10011 1375 1376 /* 1377 * On writes how does the client want the data written. 1378 */ 1379 1380 #define CACHE_CSTABLE 1 1381 #define CACHE_UNSTABLE 2 1382 1383 /* 1384 * Lets the client know at which level the data was committed on 1385 * a write request 1386 */ 1387 1388 #define CMFILE_SYNCH_NVRAM 1 1389 #define CMDATA_SYNCH_NVRAM 2 1390 #define CMFILE_SYNCH 3 1391 #define CMDATA_SYNCH 4 1392 #define CMUNSTABLE 5 1393 1394 #define RIO_TYPE_WRITE 0x0000 1395 #define RIO_TYPE_READ 0x0001 1396 #define RIO_SUREWRITE 0x0008 1397 1398 #define RIO2_IO_TYPE 0x0003 1399 #define RIO2_IO_TYPE_WRITE 0x0000 1400 #define RIO2_IO_TYPE_READ 0x0001 1401 #define RIO2_IO_TYPE_VERIFY 0x0002 1402 #define RIO2_IO_ERROR 0x0004 1403 #define RIO2_IO_SUREWRITE 0x0008 1404 #define RIO2_SGL_CONFORMANT 0x0010 1405 #define RIO2_SG_FORMAT 0xF000 1406 #define RIO2_SG_FORMAT_ARC 0x0000 1407 #define RIO2_SG_FORMAT_SRL 0x1000 1408 #define RIO2_SG_FORMAT_IEEE1212 0x2000 1409 1410 struct aac_read 1411 { 1412 __le32 command; 1413 __le32 cid; 1414 __le32 block; 1415 __le32 count; 1416 struct sgmap sg; // Must be last in struct because it is variable 1417 }; 1418 1419 struct aac_read64 1420 { 1421 __le32 command; 1422 __le16 cid; 1423 __le16 sector_count; 1424 __le32 block; 1425 __le16 pad; 1426 __le16 flags; 1427 struct sgmap64 sg; // Must be last in struct because it is variable 1428 }; 1429 1430 struct aac_read_reply 1431 { 1432 __le32 status; 1433 __le32 count; 1434 }; 1435 1436 struct aac_write 1437 { 1438 __le32 command; 1439 __le32 cid; 1440 __le32 block; 1441 __le32 count; 1442 __le32 stable; // Not used 1443 struct sgmap sg; // Must be last in struct because it is variable 1444 }; 1445 1446 struct aac_write64 1447 { 1448 __le32 command; 1449 __le16 cid; 1450 __le16 sector_count; 1451 __le32 block; 1452 __le16 pad; 1453 __le16 flags; 1454 struct sgmap64 sg; // Must be last in struct because it is variable 1455 }; 1456 struct aac_write_reply 1457 { 1458 __le32 status; 1459 __le32 count; 1460 __le32 committed; 1461 }; 1462 1463 struct aac_raw_io 1464 { 1465 __le32 block[2]; 1466 __le32 count; 1467 __le16 cid; 1468 __le16 flags; /* 00 W, 01 R */ 1469 __le16 bpTotal; /* reserved for F/W use */ 1470 __le16 bpComplete; /* reserved for F/W use */ 1471 struct sgmapraw sg; 1472 }; 1473 1474 struct aac_raw_io2 { 1475 __le32 blockLow; 1476 __le32 blockHigh; 1477 __le32 byteCount; 1478 __le16 cid; 1479 __le16 flags; /* RIO2 flags */ 1480 __le32 sgeFirstSize; /* size of first sge el. */ 1481 __le32 sgeNominalSize; /* size of 2nd sge el. (if conformant) */ 1482 u8 sgeCnt; /* only 8 bits required */ 1483 u8 bpTotal; /* reserved for F/W use */ 1484 u8 bpComplete; /* reserved for F/W use */ 1485 u8 sgeFirstIndex; /* reserved for F/W use */ 1486 u8 unused[4]; 1487 struct sge_ieee1212 sge[1]; 1488 }; 1489 1490 #define CT_FLUSH_CACHE 129 1491 struct aac_synchronize { 1492 __le32 command; /* VM_ContainerConfig */ 1493 __le32 type; /* CT_FLUSH_CACHE */ 1494 __le32 cid; 1495 __le32 parm1; 1496 __le32 parm2; 1497 __le32 parm3; 1498 __le32 parm4; 1499 __le32 count; /* sizeof(((struct aac_synchronize_reply *)NULL)->data) */ 1500 }; 1501 1502 struct aac_synchronize_reply { 1503 __le32 dummy0; 1504 __le32 dummy1; 1505 __le32 status; /* CT_OK */ 1506 __le32 parm1; 1507 __le32 parm2; 1508 __le32 parm3; 1509 __le32 parm4; 1510 __le32 parm5; 1511 u8 data[16]; 1512 }; 1513 1514 #define CT_POWER_MANAGEMENT 245 1515 #define CT_PM_START_UNIT 2 1516 #define CT_PM_STOP_UNIT 3 1517 #define CT_PM_UNIT_IMMEDIATE 1 1518 struct aac_power_management { 1519 __le32 command; /* VM_ContainerConfig */ 1520 __le32 type; /* CT_POWER_MANAGEMENT */ 1521 __le32 sub; /* CT_PM_* */ 1522 __le32 cid; 1523 __le32 parm; /* CT_PM_sub_* */ 1524 }; 1525 1526 #define CT_PAUSE_IO 65 1527 #define CT_RELEASE_IO 66 1528 struct aac_pause { 1529 __le32 command; /* VM_ContainerConfig */ 1530 __le32 type; /* CT_PAUSE_IO */ 1531 __le32 timeout; /* 10ms ticks */ 1532 __le32 min; 1533 __le32 noRescan; 1534 __le32 parm3; 1535 __le32 parm4; 1536 __le32 count; /* sizeof(((struct aac_pause_reply *)NULL)->data) */ 1537 }; 1538 1539 struct aac_srb 1540 { 1541 __le32 function; 1542 __le32 channel; 1543 __le32 id; 1544 __le32 lun; 1545 __le32 timeout; 1546 __le32 flags; 1547 __le32 count; // Data xfer size 1548 __le32 retry_limit; 1549 __le32 cdb_size; 1550 u8 cdb[16]; 1551 struct sgmap sg; 1552 }; 1553 1554 /* 1555 * This and associated data structs are used by the 1556 * ioctl caller and are in cpu order. 1557 */ 1558 struct user_aac_srb 1559 { 1560 u32 function; 1561 u32 channel; 1562 u32 id; 1563 u32 lun; 1564 u32 timeout; 1565 u32 flags; 1566 u32 count; // Data xfer size 1567 u32 retry_limit; 1568 u32 cdb_size; 1569 u8 cdb[16]; 1570 struct user_sgmap sg; 1571 }; 1572 1573 #define AAC_SENSE_BUFFERSIZE 30 1574 1575 struct aac_srb_reply 1576 { 1577 __le32 status; 1578 __le32 srb_status; 1579 __le32 scsi_status; 1580 __le32 data_xfer_length; 1581 __le32 sense_data_size; 1582 u8 sense_data[AAC_SENSE_BUFFERSIZE]; // Can this be SCSI_SENSE_BUFFERSIZE 1583 }; 1584 /* 1585 * SRB Flags 1586 */ 1587 #define SRB_NoDataXfer 0x0000 1588 #define SRB_DisableDisconnect 0x0004 1589 #define SRB_DisableSynchTransfer 0x0008 1590 #define SRB_BypassFrozenQueue 0x0010 1591 #define SRB_DisableAutosense 0x0020 1592 #define SRB_DataIn 0x0040 1593 #define SRB_DataOut 0x0080 1594 1595 /* 1596 * SRB Functions - set in aac_srb->function 1597 */ 1598 #define SRBF_ExecuteScsi 0x0000 1599 #define SRBF_ClaimDevice 0x0001 1600 #define SRBF_IO_Control 0x0002 1601 #define SRBF_ReceiveEvent 0x0003 1602 #define SRBF_ReleaseQueue 0x0004 1603 #define SRBF_AttachDevice 0x0005 1604 #define SRBF_ReleaseDevice 0x0006 1605 #define SRBF_Shutdown 0x0007 1606 #define SRBF_Flush 0x0008 1607 #define SRBF_AbortCommand 0x0010 1608 #define SRBF_ReleaseRecovery 0x0011 1609 #define SRBF_ResetBus 0x0012 1610 #define SRBF_ResetDevice 0x0013 1611 #define SRBF_TerminateIO 0x0014 1612 #define SRBF_FlushQueue 0x0015 1613 #define SRBF_RemoveDevice 0x0016 1614 #define SRBF_DomainValidation 0x0017 1615 1616 /* 1617 * SRB SCSI Status - set in aac_srb->scsi_status 1618 */ 1619 #define SRB_STATUS_PENDING 0x00 1620 #define SRB_STATUS_SUCCESS 0x01 1621 #define SRB_STATUS_ABORTED 0x02 1622 #define SRB_STATUS_ABORT_FAILED 0x03 1623 #define SRB_STATUS_ERROR 0x04 1624 #define SRB_STATUS_BUSY 0x05 1625 #define SRB_STATUS_INVALID_REQUEST 0x06 1626 #define SRB_STATUS_INVALID_PATH_ID 0x07 1627 #define SRB_STATUS_NO_DEVICE 0x08 1628 #define SRB_STATUS_TIMEOUT 0x09 1629 #define SRB_STATUS_SELECTION_TIMEOUT 0x0A 1630 #define SRB_STATUS_COMMAND_TIMEOUT 0x0B 1631 #define SRB_STATUS_MESSAGE_REJECTED 0x0D 1632 #define SRB_STATUS_BUS_RESET 0x0E 1633 #define SRB_STATUS_PARITY_ERROR 0x0F 1634 #define SRB_STATUS_REQUEST_SENSE_FAILED 0x10 1635 #define SRB_STATUS_NO_HBA 0x11 1636 #define SRB_STATUS_DATA_OVERRUN 0x12 1637 #define SRB_STATUS_UNEXPECTED_BUS_FREE 0x13 1638 #define SRB_STATUS_PHASE_SEQUENCE_FAILURE 0x14 1639 #define SRB_STATUS_BAD_SRB_BLOCK_LENGTH 0x15 1640 #define SRB_STATUS_REQUEST_FLUSHED 0x16 1641 #define SRB_STATUS_DELAYED_RETRY 0x17 1642 #define SRB_STATUS_INVALID_LUN 0x20 1643 #define SRB_STATUS_INVALID_TARGET_ID 0x21 1644 #define SRB_STATUS_BAD_FUNCTION 0x22 1645 #define SRB_STATUS_ERROR_RECOVERY 0x23 1646 #define SRB_STATUS_NOT_STARTED 0x24 1647 #define SRB_STATUS_NOT_IN_USE 0x30 1648 #define SRB_STATUS_FORCE_ABORT 0x31 1649 #define SRB_STATUS_DOMAIN_VALIDATION_FAIL 0x32 1650 1651 /* 1652 * Object-Server / Volume-Manager Dispatch Classes 1653 */ 1654 1655 #define VM_Null 0 1656 #define VM_NameServe 1 1657 #define VM_ContainerConfig 2 1658 #define VM_Ioctl 3 1659 #define VM_FilesystemIoctl 4 1660 #define VM_CloseAll 5 1661 #define VM_CtBlockRead 6 1662 #define VM_CtBlockWrite 7 1663 #define VM_SliceBlockRead 8 /* raw access to configured "storage objects" */ 1664 #define VM_SliceBlockWrite 9 1665 #define VM_DriveBlockRead 10 /* raw access to physical devices */ 1666 #define VM_DriveBlockWrite 11 1667 #define VM_EnclosureMgt 12 /* enclosure management */ 1668 #define VM_Unused 13 /* used to be diskset management */ 1669 #define VM_CtBlockVerify 14 1670 #define VM_CtPerf 15 /* performance test */ 1671 #define VM_CtBlockRead64 16 1672 #define VM_CtBlockWrite64 17 1673 #define VM_CtBlockVerify64 18 1674 #define VM_CtHostRead64 19 1675 #define VM_CtHostWrite64 20 1676 #define VM_DrvErrTblLog 21 1677 #define VM_NameServe64 22 1678 #define VM_NameServeAllBlk 30 1679 1680 #define MAX_VMCOMMAND_NUM 23 /* used for sizing stats array - leave last */ 1681 1682 /* 1683 * Descriptive information (eg, vital stats) 1684 * that a content manager might report. The 1685 * FileArray filesystem component is one example 1686 * of a content manager. Raw mode might be 1687 * another. 1688 */ 1689 1690 struct aac_fsinfo { 1691 __le32 fsTotalSize; /* Consumed by fs, incl. metadata */ 1692 __le32 fsBlockSize; 1693 __le32 fsFragSize; 1694 __le32 fsMaxExtendSize; 1695 __le32 fsSpaceUnits; 1696 __le32 fsMaxNumFiles; 1697 __le32 fsNumFreeFiles; 1698 __le32 fsInodeDensity; 1699 }; /* valid iff ObjType == FT_FILESYS && !(ContentState & FSCS_NOTCLEAN) */ 1700 1701 struct aac_blockdevinfo { 1702 __le32 block_size; 1703 }; 1704 1705 union aac_contentinfo { 1706 struct aac_fsinfo filesys; 1707 struct aac_blockdevinfo bdevinfo; 1708 }; 1709 1710 /* 1711 * Query for Container Configuration Status 1712 */ 1713 1714 #define CT_GET_CONFIG_STATUS 147 1715 struct aac_get_config_status { 1716 __le32 command; /* VM_ContainerConfig */ 1717 __le32 type; /* CT_GET_CONFIG_STATUS */ 1718 __le32 parm1; 1719 __le32 parm2; 1720 __le32 parm3; 1721 __le32 parm4; 1722 __le32 parm5; 1723 __le32 count; /* sizeof(((struct aac_get_config_status_resp *)NULL)->data) */ 1724 }; 1725 1726 #define CFACT_CONTINUE 0 1727 #define CFACT_PAUSE 1 1728 #define CFACT_ABORT 2 1729 struct aac_get_config_status_resp { 1730 __le32 response; /* ST_OK */ 1731 __le32 dummy0; 1732 __le32 status; /* CT_OK */ 1733 __le32 parm1; 1734 __le32 parm2; 1735 __le32 parm3; 1736 __le32 parm4; 1737 __le32 parm5; 1738 struct { 1739 __le32 action; /* CFACT_CONTINUE, CFACT_PAUSE or CFACT_ABORT */ 1740 __le16 flags; 1741 __le16 count; 1742 } data; 1743 }; 1744 1745 /* 1746 * Accept the configuration as-is 1747 */ 1748 1749 #define CT_COMMIT_CONFIG 152 1750 1751 struct aac_commit_config { 1752 __le32 command; /* VM_ContainerConfig */ 1753 __le32 type; /* CT_COMMIT_CONFIG */ 1754 }; 1755 1756 /* 1757 * Query for Container Configuration Status 1758 */ 1759 1760 #define CT_GET_CONTAINER_COUNT 4 1761 struct aac_get_container_count { 1762 __le32 command; /* VM_ContainerConfig */ 1763 __le32 type; /* CT_GET_CONTAINER_COUNT */ 1764 }; 1765 1766 struct aac_get_container_count_resp { 1767 __le32 response; /* ST_OK */ 1768 __le32 dummy0; 1769 __le32 MaxContainers; 1770 __le32 ContainerSwitchEntries; 1771 __le32 MaxPartitions; 1772 __le32 MaxSimpleVolumes; 1773 }; 1774 1775 1776 /* 1777 * Query for "mountable" objects, ie, objects that are typically 1778 * associated with a drive letter on the client (host) side. 1779 */ 1780 1781 struct aac_mntent { 1782 __le32 oid; 1783 u8 name[16]; /* if applicable */ 1784 struct creation_info create_info; /* if applicable */ 1785 __le32 capacity; 1786 __le32 vol; /* substrate structure */ 1787 __le32 obj; /* FT_FILESYS, etc. */ 1788 __le32 state; /* unready for mounting, 1789 readonly, etc. */ 1790 union aac_contentinfo fileinfo; /* Info specific to content 1791 manager (eg, filesystem) */ 1792 __le32 altoid; /* != oid <==> snapshot or 1793 broken mirror exists */ 1794 __le32 capacityhigh; 1795 }; 1796 1797 #define FSCS_NOTCLEAN 0x0001 /* fsck is necessary before mounting */ 1798 #define FSCS_READONLY 0x0002 /* possible result of broken mirror */ 1799 #define FSCS_HIDDEN 0x0004 /* should be ignored - set during a clear */ 1800 #define FSCS_NOT_READY 0x0008 /* Array spinning up to fulfil request */ 1801 1802 struct aac_query_mount { 1803 __le32 command; 1804 __le32 type; 1805 __le32 count; 1806 }; 1807 1808 struct aac_mount { 1809 __le32 status; 1810 __le32 type; /* should be same as that requested */ 1811 __le32 count; 1812 struct aac_mntent mnt[1]; 1813 }; 1814 1815 #define CT_READ_NAME 130 1816 struct aac_get_name { 1817 __le32 command; /* VM_ContainerConfig */ 1818 __le32 type; /* CT_READ_NAME */ 1819 __le32 cid; 1820 __le32 parm1; 1821 __le32 parm2; 1822 __le32 parm3; 1823 __le32 parm4; 1824 __le32 count; /* sizeof(((struct aac_get_name_resp *)NULL)->data) */ 1825 }; 1826 1827 struct aac_get_name_resp { 1828 __le32 dummy0; 1829 __le32 dummy1; 1830 __le32 status; /* CT_OK */ 1831 __le32 parm1; 1832 __le32 parm2; 1833 __le32 parm3; 1834 __le32 parm4; 1835 __le32 parm5; 1836 u8 data[16]; 1837 }; 1838 1839 #define CT_CID_TO_32BITS_UID 165 1840 struct aac_get_serial { 1841 __le32 command; /* VM_ContainerConfig */ 1842 __le32 type; /* CT_CID_TO_32BITS_UID */ 1843 __le32 cid; 1844 }; 1845 1846 struct aac_get_serial_resp { 1847 __le32 dummy0; 1848 __le32 dummy1; 1849 __le32 status; /* CT_OK */ 1850 __le32 uid; 1851 }; 1852 1853 /* 1854 * The following command is sent to shut down each container. 1855 */ 1856 1857 struct aac_close { 1858 __le32 command; 1859 __le32 cid; 1860 }; 1861 1862 struct aac_query_disk 1863 { 1864 s32 cnum; 1865 s32 bus; 1866 s32 id; 1867 s32 lun; 1868 u32 valid; 1869 u32 locked; 1870 u32 deleted; 1871 s32 instance; 1872 s8 name[10]; 1873 u32 unmapped; 1874 }; 1875 1876 struct aac_delete_disk { 1877 u32 disknum; 1878 u32 cnum; 1879 }; 1880 1881 struct fib_ioctl 1882 { 1883 u32 fibctx; 1884 s32 wait; 1885 char __user *fib; 1886 }; 1887 1888 struct revision 1889 { 1890 u32 compat; 1891 __le32 version; 1892 __le32 build; 1893 }; 1894 1895 1896 /* 1897 * Ugly - non Linux like ioctl coding for back compat. 1898 */ 1899 1900 #define CTL_CODE(function, method) ( \ 1901 (4<< 16) | ((function) << 2) | (method) \ 1902 ) 1903 1904 /* 1905 * Define the method codes for how buffers are passed for I/O and FS 1906 * controls 1907 */ 1908 1909 #define METHOD_BUFFERED 0 1910 #define METHOD_NEITHER 3 1911 1912 /* 1913 * Filesystem ioctls 1914 */ 1915 1916 #define FSACTL_SENDFIB CTL_CODE(2050, METHOD_BUFFERED) 1917 #define FSACTL_SEND_RAW_SRB CTL_CODE(2067, METHOD_BUFFERED) 1918 #define FSACTL_DELETE_DISK 0x163 1919 #define FSACTL_QUERY_DISK 0x173 1920 #define FSACTL_OPEN_GET_ADAPTER_FIB CTL_CODE(2100, METHOD_BUFFERED) 1921 #define FSACTL_GET_NEXT_ADAPTER_FIB CTL_CODE(2101, METHOD_BUFFERED) 1922 #define FSACTL_CLOSE_GET_ADAPTER_FIB CTL_CODE(2102, METHOD_BUFFERED) 1923 #define FSACTL_MINIPORT_REV_CHECK CTL_CODE(2107, METHOD_BUFFERED) 1924 #define FSACTL_GET_PCI_INFO CTL_CODE(2119, METHOD_BUFFERED) 1925 #define FSACTL_FORCE_DELETE_DISK CTL_CODE(2120, METHOD_NEITHER) 1926 #define FSACTL_GET_CONTAINERS 2131 1927 #define FSACTL_SEND_LARGE_FIB CTL_CODE(2138, METHOD_BUFFERED) 1928 1929 1930 struct aac_common 1931 { 1932 /* 1933 * If this value is set to 1 then interrupt moderation will occur 1934 * in the base commuication support. 1935 */ 1936 u32 irq_mod; 1937 u32 peak_fibs; 1938 u32 zero_fibs; 1939 u32 fib_timeouts; 1940 /* 1941 * Statistical counters in debug mode 1942 */ 1943 #ifdef DBG 1944 u32 FibsSent; 1945 u32 FibRecved; 1946 u32 NoResponseSent; 1947 u32 NoResponseRecved; 1948 u32 AsyncSent; 1949 u32 AsyncRecved; 1950 u32 NormalSent; 1951 u32 NormalRecved; 1952 #endif 1953 }; 1954 1955 extern struct aac_common aac_config; 1956 1957 1958 /* 1959 * The following macro is used when sending and receiving FIBs. It is 1960 * only used for debugging. 1961 */ 1962 1963 #ifdef DBG 1964 #define FIB_COUNTER_INCREMENT(counter) (counter)++ 1965 #else 1966 #define FIB_COUNTER_INCREMENT(counter) 1967 #endif 1968 1969 /* 1970 * Adapter direct commands 1971 * Monitor/Kernel API 1972 */ 1973 1974 #define BREAKPOINT_REQUEST 0x00000004 1975 #define INIT_STRUCT_BASE_ADDRESS 0x00000005 1976 #define READ_PERMANENT_PARAMETERS 0x0000000a 1977 #define WRITE_PERMANENT_PARAMETERS 0x0000000b 1978 #define HOST_CRASHING 0x0000000d 1979 #define SEND_SYNCHRONOUS_FIB 0x0000000c 1980 #define COMMAND_POST_RESULTS 0x00000014 1981 #define GET_ADAPTER_PROPERTIES 0x00000019 1982 #define GET_DRIVER_BUFFER_PROPERTIES 0x00000023 1983 #define RCV_TEMP_READINGS 0x00000025 1984 #define GET_COMM_PREFERRED_SETTINGS 0x00000026 1985 #define IOP_RESET 0x00001000 1986 #define IOP_RESET_ALWAYS 0x00001001 1987 #define RE_INIT_ADAPTER 0x000000ee 1988 1989 /* 1990 * Adapter Status Register 1991 * 1992 * Phase Staus mailbox is 32bits: 1993 * <31:16> = Phase Status 1994 * <15:0> = Phase 1995 * 1996 * The adapter reports is present state through the phase. Only 1997 * a single phase should be ever be set. Each phase can have multiple 1998 * phase status bits to provide more detailed information about the 1999 * state of the board. Care should be taken to ensure that any phase 2000 * status bits that are set when changing the phase are also valid 2001 * for the new phase or be cleared out. Adapter software (monitor, 2002 * iflash, kernel) is responsible for properly maintining the phase 2003 * status mailbox when it is running. 2004 * 2005 * MONKER_API Phases 2006 * 2007 * Phases are bit oriented. It is NOT valid to have multiple bits set 2008 */ 2009 2010 #define SELF_TEST_FAILED 0x00000004 2011 #define MONITOR_PANIC 0x00000020 2012 #define KERNEL_UP_AND_RUNNING 0x00000080 2013 #define KERNEL_PANIC 0x00000100 2014 #define FLASH_UPD_PENDING 0x00002000 2015 #define FLASH_UPD_SUCCESS 0x00004000 2016 #define FLASH_UPD_FAILED 0x00008000 2017 #define FWUPD_TIMEOUT (5 * 60) 2018 2019 /* 2020 * Doorbell bit defines 2021 */ 2022 2023 #define DoorBellSyncCmdAvailable (1<<0) /* Host -> Adapter */ 2024 #define DoorBellPrintfDone (1<<5) /* Host -> Adapter */ 2025 #define DoorBellAdapterNormCmdReady (1<<1) /* Adapter -> Host */ 2026 #define DoorBellAdapterNormRespReady (1<<2) /* Adapter -> Host */ 2027 #define DoorBellAdapterNormCmdNotFull (1<<3) /* Adapter -> Host */ 2028 #define DoorBellAdapterNormRespNotFull (1<<4) /* Adapter -> Host */ 2029 #define DoorBellPrintfReady (1<<5) /* Adapter -> Host */ 2030 #define DoorBellAifPending (1<<6) /* Adapter -> Host */ 2031 2032 /* PMC specific outbound doorbell bits */ 2033 #define PmDoorBellResponseSent (1<<1) /* Adapter -> Host */ 2034 2035 /* 2036 * For FIB communication, we need all of the following things 2037 * to send back to the user. 2038 */ 2039 2040 #define AifCmdEventNotify 1 /* Notify of event */ 2041 #define AifEnConfigChange 3 /* Adapter configuration change */ 2042 #define AifEnContainerChange 4 /* Container configuration change */ 2043 #define AifEnDeviceFailure 5 /* SCSI device failed */ 2044 #define AifEnEnclosureManagement 13 /* EM_DRIVE_* */ 2045 #define EM_DRIVE_INSERTION 31 2046 #define EM_DRIVE_REMOVAL 32 2047 #define EM_SES_DRIVE_INSERTION 33 2048 #define EM_SES_DRIVE_REMOVAL 26 2049 #define AifEnBatteryEvent 14 /* Change in Battery State */ 2050 #define AifEnAddContainer 15 /* A new array was created */ 2051 #define AifEnDeleteContainer 16 /* A container was deleted */ 2052 #define AifEnExpEvent 23 /* Firmware Event Log */ 2053 #define AifExeFirmwarePanic 3 /* Firmware Event Panic */ 2054 #define AifHighPriority 3 /* Highest Priority Event */ 2055 #define AifEnAddJBOD 30 /* JBOD created */ 2056 #define AifEnDeleteJBOD 31 /* JBOD deleted */ 2057 2058 #define AifCmdJobProgress 2 /* Progress report */ 2059 #define AifJobCtrZero 101 /* Array Zero progress */ 2060 #define AifJobStsSuccess 1 /* Job completes */ 2061 #define AifJobStsRunning 102 /* Job running */ 2062 #define AifCmdAPIReport 3 /* Report from other user of API */ 2063 #define AifCmdDriverNotify 4 /* Notify host driver of event */ 2064 #define AifDenMorphComplete 200 /* A morph operation completed */ 2065 #define AifDenVolumeExtendComplete 201 /* A volume extend completed */ 2066 #define AifReqJobList 100 /* Gets back complete job list */ 2067 #define AifReqJobsForCtr 101 /* Gets back jobs for specific container */ 2068 #define AifReqJobsForScsi 102 /* Gets back jobs for specific SCSI device */ 2069 #define AifReqJobReport 103 /* Gets back a specific job report or list of them */ 2070 #define AifReqTerminateJob 104 /* Terminates job */ 2071 #define AifReqSuspendJob 105 /* Suspends a job */ 2072 #define AifReqResumeJob 106 /* Resumes a job */ 2073 #define AifReqSendAPIReport 107 /* API generic report requests */ 2074 #define AifReqAPIJobStart 108 /* Start a job from the API */ 2075 #define AifReqAPIJobUpdate 109 /* Update a job report from the API */ 2076 #define AifReqAPIJobFinish 110 /* Finish a job from the API */ 2077 2078 /* PMC NEW COMM: Request the event data */ 2079 #define AifReqEvent 200 2080 2081 /* RAW device deleted */ 2082 #define AifRawDeviceRemove 203 2083 2084 /* 2085 * Adapter Initiated FIB command structures. Start with the adapter 2086 * initiated FIBs that really come from the adapter, and get responded 2087 * to by the host. 2088 */ 2089 2090 struct aac_aifcmd { 2091 __le32 command; /* Tell host what type of notify this is */ 2092 __le32 seqnum; /* To allow ordering of reports (if necessary) */ 2093 u8 data[1]; /* Undefined length (from kernel viewpoint) */ 2094 }; 2095 2096 /** 2097 * Convert capacity to cylinders 2098 * accounting for the fact capacity could be a 64 bit value 2099 * 2100 */ 2101 static inline unsigned int cap_to_cyls(sector_t capacity, unsigned divisor) 2102 { 2103 sector_div(capacity, divisor); 2104 return capacity; 2105 } 2106 2107 /* SCp.phase values */ 2108 #define AAC_OWNER_MIDLEVEL 0x101 2109 #define AAC_OWNER_LOWLEVEL 0x102 2110 #define AAC_OWNER_ERROR_HANDLER 0x103 2111 #define AAC_OWNER_FIRMWARE 0x106 2112 2113 int aac_acquire_irq(struct aac_dev *dev); 2114 void aac_free_irq(struct aac_dev *dev); 2115 const char *aac_driverinfo(struct Scsi_Host *); 2116 struct fib *aac_fib_alloc(struct aac_dev *dev); 2117 int aac_fib_setup(struct aac_dev *dev); 2118 void aac_fib_map_free(struct aac_dev *dev); 2119 void aac_fib_free(struct fib * context); 2120 void aac_fib_init(struct fib * context); 2121 void aac_printf(struct aac_dev *dev, u32 val); 2122 int aac_fib_send(u16 command, struct fib * context, unsigned long size, int priority, int wait, int reply, fib_callback callback, void *ctxt); 2123 int aac_consumer_get(struct aac_dev * dev, struct aac_queue * q, struct aac_entry **entry); 2124 void aac_consumer_free(struct aac_dev * dev, struct aac_queue * q, u32 qnum); 2125 int aac_fib_complete(struct fib * context); 2126 #define fib_data(fibctx) ((void *)(fibctx)->hw_fib_va->data) 2127 struct aac_dev *aac_init_adapter(struct aac_dev *dev); 2128 void aac_src_access_devreg(struct aac_dev *dev, int mode); 2129 int aac_get_config_status(struct aac_dev *dev, int commit_flag); 2130 int aac_get_containers(struct aac_dev *dev); 2131 int aac_scsi_cmd(struct scsi_cmnd *cmd); 2132 int aac_dev_ioctl(struct aac_dev *dev, int cmd, void __user *arg); 2133 #ifndef shost_to_class 2134 #define shost_to_class(shost) &shost->shost_dev 2135 #endif 2136 ssize_t aac_get_serial_number(struct device *dev, char *buf); 2137 int aac_do_ioctl(struct aac_dev * dev, int cmd, void __user *arg); 2138 int aac_rx_init(struct aac_dev *dev); 2139 int aac_rkt_init(struct aac_dev *dev); 2140 int aac_nark_init(struct aac_dev *dev); 2141 int aac_sa_init(struct aac_dev *dev); 2142 int aac_src_init(struct aac_dev *dev); 2143 int aac_srcv_init(struct aac_dev *dev); 2144 int aac_queue_get(struct aac_dev * dev, u32 * index, u32 qid, struct hw_fib * hw_fib, int wait, struct fib * fibptr, unsigned long *nonotify); 2145 void aac_define_int_mode(struct aac_dev *dev); 2146 unsigned int aac_response_normal(struct aac_queue * q); 2147 unsigned int aac_command_normal(struct aac_queue * q); 2148 unsigned int aac_intr_normal(struct aac_dev *dev, u32 Index, 2149 int isAif, int isFastResponse, 2150 struct hw_fib *aif_fib); 2151 int aac_reset_adapter(struct aac_dev * dev, int forced); 2152 int aac_check_health(struct aac_dev * dev); 2153 int aac_command_thread(void *data); 2154 int aac_close_fib_context(struct aac_dev * dev, struct aac_fib_context *fibctx); 2155 int aac_fib_adapter_complete(struct fib * fibptr, unsigned short size); 2156 struct aac_driver_ident* aac_get_driver_ident(int devtype); 2157 int aac_get_adapter_info(struct aac_dev* dev); 2158 int aac_send_shutdown(struct aac_dev *dev); 2159 int aac_probe_container(struct aac_dev *dev, int cid); 2160 int _aac_rx_init(struct aac_dev *dev); 2161 int aac_rx_select_comm(struct aac_dev *dev, int comm); 2162 int aac_rx_deliver_producer(struct fib * fib); 2163 char * get_container_type(unsigned type); 2164 extern int numacb; 2165 extern int acbsize; 2166 extern char aac_driver_version[]; 2167 extern int startup_timeout; 2168 extern int aif_timeout; 2169 extern int expose_physicals; 2170 extern int aac_reset_devices; 2171 extern int aac_msi; 2172 extern int aac_commit; 2173 extern int update_interval; 2174 extern int check_interval; 2175 extern int aac_check_reset; 2176