xref: /openbmc/linux/drivers/scsi/aacraid/aacraid.h (revision 83146efc)
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3  *	Adaptec AAC series RAID controller driver
4  *	(c) Copyright 2001 Red Hat Inc.	<alan@redhat.com>
5  *
6  * based on the old aacraid driver that is..
7  * Adaptec aacraid device driver for Linux.
8  *
9  * Copyright (c) 2000-2010 Adaptec, Inc.
10  *               2010-2015 PMC-Sierra, Inc. (aacraid@pmc-sierra.com)
11  *		 2016-2017 Microsemi Corp. (aacraid@microsemi.com)
12  *
13  * Module Name:
14  *  aacraid.h
15  *
16  * Abstract: Contains all routines for control of the aacraid driver
17  */
18 
19 #ifndef _AACRAID_H_
20 #define _AACRAID_H_
21 #ifndef dprintk
22 # define dprintk(x)
23 #endif
24 /* eg: if (nblank(dprintk(x))) */
25 #define _nblank(x) #x
26 #define nblank(x) _nblank(x)[0]
27 
28 #include <linux/interrupt.h>
29 #include <linux/completion.h>
30 #include <linux/pci.h>
31 #include <scsi/scsi_host.h>
32 #include <scsi/scsi_cmnd.h>
33 
34 /*------------------------------------------------------------------------------
35  *              D E F I N E S
36  *----------------------------------------------------------------------------*/
37 
38 #define AAC_MAX_MSIX		32	/* vectors */
39 #define AAC_PCI_MSI_ENABLE	0x8000
40 
41 enum {
42 	AAC_ENABLE_INTERRUPT	= 0x0,
43 	AAC_DISABLE_INTERRUPT,
44 	AAC_ENABLE_MSIX,
45 	AAC_DISABLE_MSIX,
46 	AAC_CLEAR_AIF_BIT,
47 	AAC_CLEAR_SYNC_BIT,
48 	AAC_ENABLE_INTX
49 };
50 
51 #define AAC_INT_MODE_INTX		(1<<0)
52 #define AAC_INT_MODE_MSI		(1<<1)
53 #define AAC_INT_MODE_AIF		(1<<2)
54 #define AAC_INT_MODE_SYNC		(1<<3)
55 #define AAC_INT_MODE_MSIX		(1<<16)
56 
57 #define AAC_INT_ENABLE_TYPE1_INTX	0xfffffffb
58 #define AAC_INT_ENABLE_TYPE1_MSIX	0xfffffffa
59 #define AAC_INT_DISABLE_ALL		0xffffffff
60 
61 /* Bit definitions in IOA->Host Interrupt Register */
62 #define PMC_TRANSITION_TO_OPERATIONAL	(1<<31)
63 #define PMC_IOARCB_TRANSFER_FAILED	(1<<28)
64 #define PMC_IOA_UNIT_CHECK		(1<<27)
65 #define PMC_NO_HOST_RRQ_FOR_CMD_RESPONSE (1<<26)
66 #define PMC_CRITICAL_IOA_OP_IN_PROGRESS	(1<<25)
67 #define PMC_IOARRIN_LOST		(1<<4)
68 #define PMC_SYSTEM_BUS_MMIO_ERROR	(1<<3)
69 #define PMC_IOA_PROCESSOR_IN_ERROR_STATE (1<<2)
70 #define PMC_HOST_RRQ_VALID		(1<<1)
71 #define PMC_OPERATIONAL_STATUS		(1<<31)
72 #define PMC_ALLOW_MSIX_VECTOR0		(1<<0)
73 
74 #define PMC_IOA_ERROR_INTERRUPTS	(PMC_IOARCB_TRANSFER_FAILED | \
75 					 PMC_IOA_UNIT_CHECK | \
76 					 PMC_NO_HOST_RRQ_FOR_CMD_RESPONSE | \
77 					 PMC_IOARRIN_LOST | \
78 					 PMC_SYSTEM_BUS_MMIO_ERROR | \
79 					 PMC_IOA_PROCESSOR_IN_ERROR_STATE)
80 
81 #define PMC_ALL_INTERRUPT_BITS		(PMC_IOA_ERROR_INTERRUPTS | \
82 					 PMC_HOST_RRQ_VALID | \
83 					 PMC_TRANSITION_TO_OPERATIONAL | \
84 					 PMC_ALLOW_MSIX_VECTOR0)
85 #define	PMC_GLOBAL_INT_BIT2		0x00000004
86 #define	PMC_GLOBAL_INT_BIT0		0x00000001
87 
88 #ifndef AAC_DRIVER_BUILD
89 # define AAC_DRIVER_BUILD 50983
90 # define AAC_DRIVER_BRANCH "-custom"
91 #endif
92 #define MAXIMUM_NUM_CONTAINERS	32
93 
94 #define AAC_NUM_MGT_FIB         8
95 #define AAC_NUM_IO_FIB		(1024 - AAC_NUM_MGT_FIB)
96 #define AAC_NUM_FIB		(AAC_NUM_IO_FIB + AAC_NUM_MGT_FIB)
97 
98 #define AAC_MAX_LUN		256
99 
100 #define AAC_MAX_HOSTPHYSMEMPAGES (0xfffff)
101 #define AAC_MAX_32BIT_SGBCOUNT	((unsigned short)256)
102 
103 #define AAC_DEBUG_INSTRUMENT_AIF_DELETE
104 
105 #define AAC_MAX_NATIVE_TARGETS		1024
106 /* Thor: 5 phys. buses: #0: empty, 1-4: 256 targets each */
107 #define AAC_MAX_BUSES			5
108 #define AAC_MAX_TARGETS		256
109 #define AAC_BUS_TARGET_LOOP		(AAC_MAX_BUSES * AAC_MAX_TARGETS)
110 #define AAC_MAX_NATIVE_SIZE		2048
111 #define FW_ERROR_BUFFER_SIZE		512
112 #define AAC_SA_TIMEOUT			180
113 #define AAC_ARC_TIMEOUT			60
114 
115 #define get_bus_number(x)	(x/AAC_MAX_TARGETS)
116 #define get_target_number(x)	(x%AAC_MAX_TARGETS)
117 
118 /* Thor AIF events */
119 #define SA_AIF_HOTPLUG			(1<<1)
120 #define SA_AIF_HARDWARE		(1<<2)
121 #define SA_AIF_PDEV_CHANGE		(1<<4)
122 #define SA_AIF_LDEV_CHANGE		(1<<5)
123 #define SA_AIF_BPSTAT_CHANGE		(1<<30)
124 #define SA_AIF_BPCFG_CHANGE		(1U<<31)
125 
126 #define HBA_MAX_SG_EMBEDDED		28
127 #define HBA_MAX_SG_SEPARATE		90
128 #define HBA_SENSE_DATA_LEN_MAX		32
129 #define HBA_REQUEST_TAG_ERROR_FLAG	0x00000002
130 #define HBA_SGL_FLAGS_EXT		0x80000000UL
131 
132 struct aac_hba_sgl {
133 	u32		addr_lo; /* Lower 32-bits of SGL element address */
134 	u32		addr_hi; /* Upper 32-bits of SGL element address */
135 	u32		len;	/* Length of SGL element in bytes */
136 	u32		flags;	/* SGL element flags */
137 };
138 
139 enum {
140 	HBA_IU_TYPE_SCSI_CMD_REQ		= 0x40,
141 	HBA_IU_TYPE_SCSI_TM_REQ			= 0x41,
142 	HBA_IU_TYPE_SATA_REQ			= 0x42,
143 	HBA_IU_TYPE_RESP			= 0x60,
144 	HBA_IU_TYPE_COALESCED_RESP		= 0x61,
145 	HBA_IU_TYPE_INT_COALESCING_CFG_REQ	= 0x70
146 };
147 
148 enum {
149 	HBA_CMD_BYTE1_DATA_DIR_IN		= 0x1,
150 	HBA_CMD_BYTE1_DATA_DIR_OUT		= 0x2,
151 	HBA_CMD_BYTE1_DATA_TYPE_DDR		= 0x4,
152 	HBA_CMD_BYTE1_CRYPTO_ENABLE		= 0x8
153 };
154 
155 enum {
156 	HBA_CMD_BYTE1_BITOFF_DATA_DIR_IN	= 0x0,
157 	HBA_CMD_BYTE1_BITOFF_DATA_DIR_OUT,
158 	HBA_CMD_BYTE1_BITOFF_DATA_TYPE_DDR,
159 	HBA_CMD_BYTE1_BITOFF_CRYPTO_ENABLE
160 };
161 
162 enum {
163 	HBA_RESP_DATAPRES_NO_DATA		= 0x0,
164 	HBA_RESP_DATAPRES_RESPONSE_DATA,
165 	HBA_RESP_DATAPRES_SENSE_DATA
166 };
167 
168 enum {
169 	HBA_RESP_SVCRES_TASK_COMPLETE		= 0x0,
170 	HBA_RESP_SVCRES_FAILURE,
171 	HBA_RESP_SVCRES_TMF_COMPLETE,
172 	HBA_RESP_SVCRES_TMF_SUCCEEDED,
173 	HBA_RESP_SVCRES_TMF_REJECTED,
174 	HBA_RESP_SVCRES_TMF_LUN_INVALID
175 };
176 
177 enum {
178 	HBA_RESP_STAT_IO_ERROR			= 0x1,
179 	HBA_RESP_STAT_IO_ABORTED,
180 	HBA_RESP_STAT_NO_PATH_TO_DEVICE,
181 	HBA_RESP_STAT_INVALID_DEVICE,
182 	HBA_RESP_STAT_HBAMODE_DISABLED		= 0xE,
183 	HBA_RESP_STAT_UNDERRUN			= 0x51,
184 	HBA_RESP_STAT_OVERRUN			= 0x75
185 };
186 
187 struct aac_hba_cmd_req {
188 	u8	iu_type;	/* HBA information unit type */
189 	/*
190 	 * byte1:
191 	 * [1:0] DIR - 0=No data, 0x1 = IN, 0x2 = OUT
192 	 * [2]   TYPE - 0=PCI, 1=DDR
193 	 * [3]   CRYPTO_ENABLE - 0=Crypto disabled, 1=Crypto enabled
194 	 */
195 	u8	byte1;
196 	u8	reply_qid;	/* Host reply queue to post response to */
197 	u8	reserved1;
198 	__le32	it_nexus;	/* Device handle for the request */
199 	__le32	request_id;	/* Sender context */
200 	/* Lower 32-bits of tweak value for crypto enabled IOs */
201 	__le32	tweak_value_lo;
202 	u8	cdb[16];	/* SCSI CDB of the command */
203 	u8	lun[8];		/* SCSI LUN of the command */
204 
205 	/* Total data length in bytes to be read/written (if any) */
206 	__le32	data_length;
207 
208 	/* [2:0] Task Attribute, [6:3] Command Priority */
209 	u8	attr_prio;
210 
211 	/* Number of SGL elements embedded in the HBA req */
212 	u8	emb_data_desc_count;
213 
214 	__le16	dek_index;	/* DEK index for crypto enabled IOs */
215 
216 	/* Lower 32-bits of reserved error data target location on the host */
217 	__le32	error_ptr_lo;
218 
219 	/* Upper 32-bits of reserved error data target location on the host */
220 	__le32	error_ptr_hi;
221 
222 	/* Length of reserved error data area on the host in bytes */
223 	__le32	error_length;
224 
225 	/* Upper 32-bits of tweak value for crypto enabled IOs */
226 	__le32	tweak_value_hi;
227 
228 	struct aac_hba_sgl sge[HBA_MAX_SG_SEPARATE+2]; /* SG list space */
229 
230 	/*
231 	 * structure must not exceed
232 	 * AAC_MAX_NATIVE_SIZE-FW_ERROR_BUFFER_SIZE
233 	 */
234 };
235 
236 /* Task Management Functions (TMF) */
237 #define HBA_TMF_ABORT_TASK	0x01
238 #define HBA_TMF_LUN_RESET	0x08
239 
240 struct aac_hba_tm_req {
241 	u8	iu_type;	/* HBA information unit type */
242 	u8	reply_qid;	/* Host reply queue to post response to */
243 	u8	tmf;		/* Task management function */
244 	u8	reserved1;
245 
246 	__le32	it_nexus;	/* Device handle for the command */
247 
248 	u8	lun[8];		/* SCSI LUN */
249 
250 	/* Used to hold sender context. */
251 	__le32	request_id;	/* Sender context */
252 	__le32	reserved2;
253 
254 	/* Request identifier of managed task */
255 	__le32	managed_request_id;	/* Sender context being managed */
256 	__le32	reserved3;
257 
258 	/* Lower 32-bits of reserved error data target location on the host */
259 	__le32	error_ptr_lo;
260 	/* Upper 32-bits of reserved error data target location on the host */
261 	__le32	error_ptr_hi;
262 	/* Length of reserved error data area on the host in bytes */
263 	__le32	error_length;
264 };
265 
266 struct aac_hba_reset_req {
267 	u8	iu_type;	/* HBA information unit type */
268 	/* 0 - reset specified device, 1 - reset all devices */
269 	u8	reset_type;
270 	u8	reply_qid;	/* Host reply queue to post response to */
271 	u8	reserved1;
272 
273 	__le32	it_nexus;	/* Device handle for the command */
274 	__le32	request_id;	/* Sender context */
275 	/* Lower 32-bits of reserved error data target location on the host */
276 	__le32	error_ptr_lo;
277 	/* Upper 32-bits of reserved error data target location on the host */
278 	__le32	error_ptr_hi;
279 	/* Length of reserved error data area on the host in bytes */
280 	__le32	error_length;
281 };
282 
283 struct aac_hba_resp {
284 	u8	iu_type;		/* HBA information unit type */
285 	u8	reserved1[3];
286 	__le32	request_identifier;	/* sender context */
287 	__le32	reserved2;
288 	u8	service_response;	/* SCSI service response */
289 	u8	status;			/* SCSI status */
290 	u8	datapres;	/* [1:0] - data present, [7:2] - reserved */
291 	u8	sense_response_data_len;	/* Sense/response data length */
292 	__le32	residual_count;		/* Residual data length in bytes */
293 	/* Sense/response data */
294 	u8	sense_response_buf[HBA_SENSE_DATA_LEN_MAX];
295 };
296 
297 struct aac_native_hba {
298 	union {
299 		struct aac_hba_cmd_req cmd;
300 		struct aac_hba_tm_req tmr;
301 		u8 cmd_bytes[AAC_MAX_NATIVE_SIZE-FW_ERROR_BUFFER_SIZE];
302 	} cmd;
303 	union {
304 		struct aac_hba_resp err;
305 		u8 resp_bytes[FW_ERROR_BUFFER_SIZE];
306 	} resp;
307 };
308 
309 #define CISS_REPORT_PHYSICAL_LUNS	0xc3
310 #define WRITE_HOST_WELLNESS		0xa5
311 #define CISS_IDENTIFY_PHYSICAL_DEVICE	0x15
312 #define BMIC_IN			0x26
313 #define BMIC_OUT			0x27
314 
315 struct aac_ciss_phys_luns_resp {
316 	u8	list_length[4];		/* LUN list length (N-7, big endian) */
317 	u8	resp_flag;		/* extended response_flag */
318 	u8	reserved[3];
319 	struct _ciss_lun {
320 		u8	tid[3];		/* Target ID */
321 		u8	bus;		/* Bus, flag (bits 6,7) */
322 		u8	level3[2];
323 		u8	level2[2];
324 		u8	node_ident[16];	/* phys. node identifier */
325 	} lun[1];			/* List of phys. devices */
326 };
327 
328 /*
329  * Interrupts
330  */
331 #define AAC_MAX_HRRQ		64
332 
333 struct aac_ciss_identify_pd {
334 	u8 scsi_bus;			/* SCSI Bus number on controller */
335 	u8 scsi_id;			/* SCSI ID on this bus */
336 	u16 block_size;			/* sector size in bytes */
337 	u32 total_blocks;		/* number for sectors on drive */
338 	u32 reserved_blocks;		/* controller reserved (RIS) */
339 	u8 model[40];			/* Physical Drive Model */
340 	u8 serial_number[40];		/* Drive Serial Number */
341 	u8 firmware_revision[8];	/* drive firmware revision */
342 	u8 scsi_inquiry_bits;		/* inquiry byte 7 bits */
343 	u8 compaq_drive_stamp;		/* 0 means drive not stamped */
344 	u8 last_failure_reason;
345 
346 	u8  flags;
347 	u8  more_flags;
348 	u8  scsi_lun;			/* SCSI LUN for phys drive */
349 	u8  yet_more_flags;
350 	u8  even_more_flags;
351 	u32 spi_speed_rules;		/* SPI Speed :Ultra disable diagnose */
352 	u8  phys_connector[2];		/* connector number on controller */
353 	u8  phys_box_on_bus;		/* phys enclosure this drive resides */
354 	u8  phys_bay_in_box;		/* phys drv bay this drive resides */
355 	u32 rpm;			/* Drive rotational speed in rpm */
356 	u8  device_type;		/* type of drive */
357 	u8  sata_version;		/* only valid when drive_type is SATA */
358 	u64 big_total_block_count;
359 	u64 ris_starting_lba;
360 	u32 ris_size;
361 	u8  wwid[20];
362 	u8  controller_phy_map[32];
363 	u16 phy_count;
364 	u8  phy_connected_dev_type[256];
365 	u8  phy_to_drive_bay_num[256];
366 	u16 phy_to_attached_dev_index[256];
367 	u8  box_index;
368 	u8  spitfire_support;
369 	u16 extra_physical_drive_flags;
370 	u8  negotiated_link_rate[256];
371 	u8  phy_to_phy_map[256];
372 	u8  redundant_path_present_map;
373 	u8  redundant_path_failure_map;
374 	u8  active_path_number;
375 	u16 alternate_paths_phys_connector[8];
376 	u8  alternate_paths_phys_box_on_port[8];
377 	u8  multi_lun_device_lun_count;
378 	u8  minimum_good_fw_revision[8];
379 	u8  unique_inquiry_bytes[20];
380 	u8  current_temperature_degreesC;
381 	u8  temperature_threshold_degreesC;
382 	u8  max_temperature_degreesC;
383 	u8  logical_blocks_per_phys_block_exp;	/* phyblocksize = 512 * 2^exp */
384 	u16 current_queue_depth_limit;
385 	u8  switch_name[10];
386 	u16 switch_port;
387 	u8  alternate_paths_switch_name[40];
388 	u8  alternate_paths_switch_port[8];
389 	u16 power_on_hours;		/* valid only if gas gauge supported */
390 	u16 percent_endurance_used;	/* valid only if gas gauge supported. */
391 	u8  drive_authentication;
392 	u8  smart_carrier_authentication;
393 	u8  smart_carrier_app_fw_version;
394 	u8  smart_carrier_bootloader_fw_version;
395 	u8  SanitizeSecureEraseSupport;
396 	u8  DriveKeyFlags;
397 	u8  encryption_key_name[64];
398 	u32 misc_drive_flags;
399 	u16 dek_index;
400 	u16 drive_encryption_flags;
401 	u8  sanitize_maximum_time[6];
402 	u8  connector_info_mode;
403 	u8  connector_info_number[4];
404 	u8  long_connector_name[64];
405 	u8  device_unique_identifier[16];
406 	u8  padto_2K[17];
407 } __packed;
408 
409 /*
410  * These macros convert from physical channels to virtual channels
411  */
412 #define CONTAINER_CHANNEL		(0)
413 #define NATIVE_CHANNEL			(1)
414 #define CONTAINER_TO_CHANNEL(cont)	(CONTAINER_CHANNEL)
415 #define CONTAINER_TO_ID(cont)		(cont)
416 #define CONTAINER_TO_LUN(cont)		(0)
417 #define ENCLOSURE_CHANNEL		(3)
418 
419 #define PMC_DEVICE_S6	0x28b
420 #define PMC_DEVICE_S7	0x28c
421 #define PMC_DEVICE_S8	0x28d
422 
423 #define aac_phys_to_logical(x)  ((x)+1)
424 #define aac_logical_to_phys(x)  ((x)?(x)-1:0)
425 
426 /*
427  * These macros are for keeping track of
428  * character device state.
429  */
430 #define AAC_CHARDEV_UNREGISTERED	(-1)
431 #define AAC_CHARDEV_NEEDS_REINIT	(-2)
432 
433 /* #define AAC_DETAILED_STATUS_INFO */
434 
435 struct diskparm
436 {
437 	int heads;
438 	int sectors;
439 	int cylinders;
440 };
441 
442 
443 /*
444  *	Firmware constants
445  */
446 
447 #define		CT_NONE			0
448 #define		CT_OK			218
449 #define		FT_FILESYS	8	/* ADAPTEC's "FSA"(tm) filesystem */
450 #define		FT_DRIVE	9	/* physical disk - addressable in scsi by bus/id/lun */
451 
452 /*
453  *	Host side memory scatter gather list
454  *	Used by the adapter for read, write, and readdirplus operations
455  *	We have separate 32 and 64 bit version because even
456  *	on 64 bit systems not all cards support the 64 bit version
457  */
458 struct sgentry {
459 	__le32	addr;	/* 32-bit address. */
460 	__le32	count;	/* Length. */
461 };
462 
463 struct user_sgentry {
464 	u32	addr;	/* 32-bit address. */
465 	u32	count;	/* Length. */
466 };
467 
468 struct sgentry64 {
469 	__le32	addr[2];	/* 64-bit addr. 2 pieces for data alignment */
470 	__le32	count;	/* Length. */
471 };
472 
473 struct user_sgentry64 {
474 	u32	addr[2];	/* 64-bit addr. 2 pieces for data alignment */
475 	u32	count;	/* Length. */
476 };
477 
478 struct sgentryraw {
479 	__le32		next;	/* reserved for F/W use */
480 	__le32		prev;	/* reserved for F/W use */
481 	__le32		addr[2];
482 	__le32		count;
483 	__le32		flags;	/* reserved for F/W use */
484 };
485 
486 struct user_sgentryraw {
487 	u32		next;	/* reserved for F/W use */
488 	u32		prev;	/* reserved for F/W use */
489 	u32		addr[2];
490 	u32		count;
491 	u32		flags;	/* reserved for F/W use */
492 };
493 
494 struct sge_ieee1212 {
495 	u32	addrLow;
496 	u32	addrHigh;
497 	u32	length;
498 	u32	flags;
499 };
500 
501 /*
502  *	SGMAP
503  *
504  *	This is the SGMAP structure for all commands that use
505  *	32-bit addressing.
506  */
507 
508 struct sgmap {
509 	__le32		count;
510 	struct sgentry	sg[1];
511 };
512 
513 struct user_sgmap {
514 	u32		count;
515 	struct user_sgentry	sg[1];
516 };
517 
518 struct sgmap64 {
519 	__le32		count;
520 	struct sgentry64 sg[1];
521 };
522 
523 struct user_sgmap64 {
524 	u32		count;
525 	struct user_sgentry64 sg[1];
526 };
527 
528 struct sgmapraw {
529 	__le32		  count;
530 	struct sgentryraw sg[1];
531 };
532 
533 struct user_sgmapraw {
534 	u32		  count;
535 	struct user_sgentryraw sg[1];
536 };
537 
538 struct creation_info
539 {
540 	u8		buildnum;		/* e.g., 588 */
541 	u8		usec;			/* e.g., 588 */
542 	u8		via;			/* e.g., 1 = FSU,
543 						 *	 2 = API
544 						 */
545 	u8		year;			/* e.g., 1997 = 97 */
546 	__le32		date;			/*
547 						 * unsigned	Month		:4;	// 1 - 12
548 						 * unsigned	Day		:6;	// 1 - 32
549 						 * unsigned	Hour		:6;	// 0 - 23
550 						 * unsigned	Minute		:6;	// 0 - 60
551 						 * unsigned	Second		:6;	// 0 - 60
552 						 */
553 	__le32		serial[2];			/* e.g., 0x1DEADB0BFAFAF001 */
554 };
555 
556 
557 /*
558  *	Define all the constants needed for the communication interface
559  */
560 
561 /*
562  *	Define how many queue entries each queue will have and the total
563  *	number of entries for the entire communication interface. Also define
564  *	how many queues we support.
565  *
566  *	This has to match the controller
567  */
568 
569 #define NUMBER_OF_COMM_QUEUES  8   // 4 command; 4 response
570 #define HOST_HIGH_CMD_ENTRIES  4
571 #define HOST_NORM_CMD_ENTRIES  8
572 #define ADAP_HIGH_CMD_ENTRIES  4
573 #define ADAP_NORM_CMD_ENTRIES  512
574 #define HOST_HIGH_RESP_ENTRIES 4
575 #define HOST_NORM_RESP_ENTRIES 512
576 #define ADAP_HIGH_RESP_ENTRIES 4
577 #define ADAP_NORM_RESP_ENTRIES 8
578 
579 #define TOTAL_QUEUE_ENTRIES  \
580     (HOST_NORM_CMD_ENTRIES + HOST_HIGH_CMD_ENTRIES + ADAP_NORM_CMD_ENTRIES + ADAP_HIGH_CMD_ENTRIES + \
581 	    HOST_NORM_RESP_ENTRIES + HOST_HIGH_RESP_ENTRIES + ADAP_NORM_RESP_ENTRIES + ADAP_HIGH_RESP_ENTRIES)
582 
583 
584 /*
585  *	Set the queues on a 16 byte alignment
586  */
587 
588 #define QUEUE_ALIGNMENT		16
589 
590 /*
591  *	The queue headers define the Communication Region queues. These
592  *	are physically contiguous and accessible by both the adapter and the
593  *	host. Even though all queue headers are in the same contiguous block
594  *	they will be represented as individual units in the data structures.
595  */
596 
597 struct aac_entry {
598 	__le32 size; /* Size in bytes of Fib which this QE points to */
599 	__le32 addr; /* Receiver address of the FIB */
600 };
601 
602 /*
603  *	The adapter assumes the ProducerIndex and ConsumerIndex are grouped
604  *	adjacently and in that order.
605  */
606 
607 struct aac_qhdr {
608 	__le64 header_addr;/* Address to hand the adapter to access
609 			      to this queue head */
610 	__le32 *producer; /* The producer index for this queue (host address) */
611 	__le32 *consumer; /* The consumer index for this queue (host address) */
612 };
613 
614 /*
615  *	Define all the events which the adapter would like to notify
616  *	the host of.
617  */
618 
619 #define		HostNormCmdQue		1	/* Change in host normal priority command queue */
620 #define		HostHighCmdQue		2	/* Change in host high priority command queue */
621 #define		HostNormRespQue		3	/* Change in host normal priority response queue */
622 #define		HostHighRespQue		4	/* Change in host high priority response queue */
623 #define		AdapNormRespNotFull	5
624 #define		AdapHighRespNotFull	6
625 #define		AdapNormCmdNotFull	7
626 #define		AdapHighCmdNotFull	8
627 #define		SynchCommandComplete	9
628 #define		AdapInternalError	0xfe    /* The adapter detected an internal error shutting down */
629 
630 /*
631  *	Define all the events the host wishes to notify the
632  *	adapter of. The first four values much match the Qid the
633  *	corresponding queue.
634  */
635 
636 #define		AdapNormCmdQue		2
637 #define		AdapHighCmdQue		3
638 #define		AdapNormRespQue		6
639 #define		AdapHighRespQue		7
640 #define		HostShutdown		8
641 #define		HostPowerFail		9
642 #define		FatalCommError		10
643 #define		HostNormRespNotFull	11
644 #define		HostHighRespNotFull	12
645 #define		HostNormCmdNotFull	13
646 #define		HostHighCmdNotFull	14
647 #define		FastIo			15
648 #define		AdapPrintfDone		16
649 
650 /*
651  *	Define all the queues that the adapter and host use to communicate
652  *	Number them to match the physical queue layout.
653  */
654 
655 enum aac_queue_types {
656         HostNormCmdQueue = 0,	/* Adapter to host normal priority command traffic */
657         HostHighCmdQueue,	/* Adapter to host high priority command traffic */
658         AdapNormCmdQueue,	/* Host to adapter normal priority command traffic */
659         AdapHighCmdQueue,	/* Host to adapter high priority command traffic */
660         HostNormRespQueue,	/* Adapter to host normal priority response traffic */
661         HostHighRespQueue,	/* Adapter to host high priority response traffic */
662         AdapNormRespQueue,	/* Host to adapter normal priority response traffic */
663         AdapHighRespQueue	/* Host to adapter high priority response traffic */
664 };
665 
666 /*
667  *	Assign type values to the FSA communication data structures
668  */
669 
670 #define		FIB_MAGIC	0x0001
671 #define		FIB_MAGIC2	0x0004
672 #define		FIB_MAGIC2_64	0x0005
673 
674 /*
675  *	Define the priority levels the FSA communication routines support.
676  */
677 
678 #define		FsaNormal	1
679 
680 /* transport FIB header (PMC) */
681 struct aac_fib_xporthdr {
682 	__le64	HostAddress;	/* FIB host address w/o xport header */
683 	__le32	Size;		/* FIB size excluding xport header */
684 	__le32	Handle;		/* driver handle to reference the FIB */
685 	__le64	Reserved[2];
686 };
687 
688 #define		ALIGN32		32
689 
690 /*
691  * Define the FIB. The FIB is the where all the requested data and
692  * command information are put to the application on the FSA adapter.
693  */
694 
695 struct aac_fibhdr {
696 	__le32 XferState;	/* Current transfer state for this CCB */
697 	__le16 Command;		/* Routing information for the destination */
698 	u8 StructType;		/* Type FIB */
699 	u8 Unused;		/* Unused */
700 	__le16 Size;		/* Size of this FIB in bytes */
701 	__le16 SenderSize;	/* Size of the FIB in the sender
702 				   (for response sizing) */
703 	__le32 SenderFibAddress;  /* Host defined data in the FIB */
704 	union {
705 		__le32 ReceiverFibAddress;/* Logical address of this FIB for
706 				     the adapter (old) */
707 		__le32 SenderFibAddressHigh;/* upper 32bit of phys. FIB address */
708 		__le32 TimeStamp;	/* otherwise timestamp for FW internal use */
709 	} u;
710 	__le32 Handle;		/* FIB handle used for MSGU commnunication */
711 	u32 Previous;		/* FW internal use */
712 	u32 Next;		/* FW internal use */
713 };
714 
715 struct hw_fib {
716 	struct aac_fibhdr header;
717 	u8 data[512-sizeof(struct aac_fibhdr)];	// Command specific data
718 };
719 
720 /*
721  *	FIB commands
722  */
723 
724 #define		TestCommandResponse		1
725 #define		TestAdapterCommand		2
726 /*
727  *	Lowlevel and comm commands
728  */
729 #define		LastTestCommand			100
730 #define		ReinitHostNormCommandQueue	101
731 #define		ReinitHostHighCommandQueue	102
732 #define		ReinitHostHighRespQueue		103
733 #define		ReinitHostNormRespQueue		104
734 #define		ReinitAdapNormCommandQueue	105
735 #define		ReinitAdapHighCommandQueue	107
736 #define		ReinitAdapHighRespQueue		108
737 #define		ReinitAdapNormRespQueue		109
738 #define		InterfaceShutdown		110
739 #define		DmaCommandFib			120
740 #define		StartProfile			121
741 #define		TermProfile			122
742 #define		SpeedTest			123
743 #define		TakeABreakPt			124
744 #define		RequestPerfData			125
745 #define		SetInterruptDefTimer		126
746 #define		SetInterruptDefCount		127
747 #define		GetInterruptDefStatus		128
748 #define		LastCommCommand			129
749 /*
750  *	Filesystem commands
751  */
752 #define		NuFileSystem			300
753 #define		UFS				301
754 #define		HostFileSystem			302
755 #define		LastFileSystemCommand		303
756 /*
757  *	Container Commands
758  */
759 #define		ContainerCommand		500
760 #define		ContainerCommand64		501
761 #define		ContainerRawIo			502
762 #define		ContainerRawIo2			503
763 /*
764  *	Scsi Port commands (scsi passthrough)
765  */
766 #define		ScsiPortCommand			600
767 #define		ScsiPortCommand64		601
768 /*
769  *	Misc house keeping and generic adapter initiated commands
770  */
771 #define		AifRequest			700
772 #define		CheckRevision			701
773 #define		FsaHostShutdown			702
774 #define		RequestAdapterInfo		703
775 #define		IsAdapterPaused			704
776 #define		SendHostTime			705
777 #define		RequestSupplementAdapterInfo	706
778 #define		LastMiscCommand			707
779 
780 /*
781  * Commands that will target the failover level on the FSA adapter
782  */
783 
784 enum fib_xfer_state {
785 	HostOwned			= (1<<0),
786 	AdapterOwned			= (1<<1),
787 	FibInitialized			= (1<<2),
788 	FibEmpty			= (1<<3),
789 	AllocatedFromPool		= (1<<4),
790 	SentFromHost			= (1<<5),
791 	SentFromAdapter			= (1<<6),
792 	ResponseExpected		= (1<<7),
793 	NoResponseExpected		= (1<<8),
794 	AdapterProcessed		= (1<<9),
795 	HostProcessed			= (1<<10),
796 	HighPriority			= (1<<11),
797 	NormalPriority			= (1<<12),
798 	Async				= (1<<13),
799 	AsyncIo				= (1<<13),	// rpbfix: remove with new regime
800 	PageFileIo			= (1<<14),	// rpbfix: remove with new regime
801 	ShutdownRequest			= (1<<15),
802 	LazyWrite			= (1<<16),	// rpbfix: remove with new regime
803 	AdapterMicroFib			= (1<<17),
804 	BIOSFibPath			= (1<<18),
805 	FastResponseCapable		= (1<<19),
806 	ApiFib				= (1<<20),	/* Its an API Fib */
807 	/* PMC NEW COMM: There is no more AIF data pending */
808 	NoMoreAifDataAvailable		= (1<<21)
809 };
810 
811 /*
812  *	The following defines needs to be updated any time there is an
813  *	incompatible change made to the aac_init structure.
814  */
815 
816 #define ADAPTER_INIT_STRUCT_REVISION		3
817 #define ADAPTER_INIT_STRUCT_REVISION_4		4 // rocket science
818 #define ADAPTER_INIT_STRUCT_REVISION_6		6 /* PMC src */
819 #define ADAPTER_INIT_STRUCT_REVISION_7		7 /* Denali */
820 #define ADAPTER_INIT_STRUCT_REVISION_8		8 // Thor
821 
822 union aac_init
823 {
824 	struct _r7 {
825 		__le32	init_struct_revision;
826 		__le32	no_of_msix_vectors;
827 		__le32	fsrev;
828 		__le32	comm_header_address;
829 		__le32	fast_io_comm_area_address;
830 		__le32	adapter_fibs_physical_address;
831 		__le32	adapter_fibs_virtual_address;
832 		__le32	adapter_fibs_size;
833 		__le32	adapter_fib_align;
834 		__le32	printfbuf;
835 		__le32	printfbufsiz;
836 		/* number of 4k pages of host phys. mem. */
837 		__le32	host_phys_mem_pages;
838 		/* number of seconds since 1970. */
839 		__le32	host_elapsed_seconds;
840 		/* ADAPTER_INIT_STRUCT_REVISION_4 begins here */
841 		__le32	init_flags;	/* flags for supported features */
842 #define INITFLAGS_NEW_COMM_SUPPORTED	0x00000001
843 #define INITFLAGS_DRIVER_USES_UTC_TIME	0x00000010
844 #define INITFLAGS_DRIVER_SUPPORTS_PM	0x00000020
845 #define INITFLAGS_NEW_COMM_TYPE1_SUPPORTED	0x00000040
846 #define INITFLAGS_FAST_JBOD_SUPPORTED	0x00000080
847 #define INITFLAGS_NEW_COMM_TYPE2_SUPPORTED	0x00000100
848 #define INITFLAGS_DRIVER_SUPPORTS_HBA_MODE  0x00000400
849 		__le32	max_io_commands;	/* max outstanding commands */
850 		__le32	max_io_size;	/* largest I/O command */
851 		__le32	max_fib_size;	/* largest FIB to adapter */
852 		/* ADAPTER_INIT_STRUCT_REVISION_5 begins here */
853 		__le32	max_num_aif;	/* max number of aif */
854 		/* ADAPTER_INIT_STRUCT_REVISION_6 begins here */
855 		/* Host RRQ (response queue) for SRC */
856 		__le32	host_rrq_addr_low;
857 		__le32	host_rrq_addr_high;
858 	} r7;
859 	struct _r8 {
860 		/* ADAPTER_INIT_STRUCT_REVISION_8 */
861 		__le32	init_struct_revision;
862 		__le32	rr_queue_count;
863 		__le32	host_elapsed_seconds; /* number of secs since 1970. */
864 		__le32	init_flags;
865 		__le32	max_io_size;	/* largest I/O command */
866 		__le32	max_num_aif;	/* max number of aif */
867 		__le32	reserved1;
868 		__le32	reserved2;
869 		struct _rrq {
870 			__le32	host_addr_low;
871 			__le32	host_addr_high;
872 			__le16	msix_id;
873 			__le16	element_count;
874 			__le16	comp_thresh;
875 			__le16	unused;
876 		} rrq[1];		/* up to 64 RRQ addresses */
877 	} r8;
878 };
879 
880 enum aac_log_level {
881 	LOG_AAC_INIT			= 10,
882 	LOG_AAC_INFORMATIONAL		= 20,
883 	LOG_AAC_WARNING			= 30,
884 	LOG_AAC_LOW_ERROR		= 40,
885 	LOG_AAC_MEDIUM_ERROR		= 50,
886 	LOG_AAC_HIGH_ERROR		= 60,
887 	LOG_AAC_PANIC			= 70,
888 	LOG_AAC_DEBUG			= 80,
889 	LOG_AAC_WINDBG_PRINT		= 90
890 };
891 
892 #define FSAFS_NTC_GET_ADAPTER_FIB_CONTEXT	0x030b
893 #define FSAFS_NTC_FIB_CONTEXT			0x030c
894 
895 struct aac_dev;
896 struct fib;
897 struct scsi_cmnd;
898 
899 struct adapter_ops
900 {
901 	/* Low level operations */
902 	void (*adapter_interrupt)(struct aac_dev *dev);
903 	void (*adapter_notify)(struct aac_dev *dev, u32 event);
904 	void (*adapter_disable_int)(struct aac_dev *dev);
905 	void (*adapter_enable_int)(struct aac_dev *dev);
906 	int  (*adapter_sync_cmd)(struct aac_dev *dev, u32 command, u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, u32 *status, u32 *r1, u32 *r2, u32 *r3, u32 *r4);
907 	int  (*adapter_check_health)(struct aac_dev *dev);
908 	int  (*adapter_restart)(struct aac_dev *dev, int bled, u8 reset_type);
909 	void (*adapter_start)(struct aac_dev *dev);
910 	/* Transport operations */
911 	int  (*adapter_ioremap)(struct aac_dev * dev, u32 size);
912 	irq_handler_t adapter_intr;
913 	/* Packet operations */
914 	int  (*adapter_deliver)(struct fib * fib);
915 	int  (*adapter_bounds)(struct aac_dev * dev, struct scsi_cmnd * cmd, u64 lba);
916 	int  (*adapter_read)(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count);
917 	int  (*adapter_write)(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count, int fua);
918 	int  (*adapter_scsi)(struct fib * fib, struct scsi_cmnd * cmd);
919 	/* Administrative operations */
920 	int  (*adapter_comm)(struct aac_dev * dev, int comm);
921 };
922 
923 /*
924  *	Define which interrupt handler needs to be installed
925  */
926 
927 struct aac_driver_ident
928 {
929 	int	(*init)(struct aac_dev *dev);
930 	char *	name;
931 	char *	vname;
932 	char *	model;
933 	u16	channels;
934 	int	quirks;
935 };
936 /*
937  * Some adapter firmware needs communication memory
938  * below 2gig. This tells the init function to set the
939  * dma mask such that fib memory will be allocated where the
940  * adapter firmware can get to it.
941  */
942 #define AAC_QUIRK_31BIT	0x0001
943 
944 /*
945  * Some adapter firmware, when the raid card's cache is turned off, can not
946  * split up scatter gathers in order to deal with the limits of the
947  * underlying CHIM. This limit is 34 scatter gather elements.
948  */
949 #define AAC_QUIRK_34SG	0x0002
950 
951 /*
952  * This adapter is a slave (no Firmware)
953  */
954 #define AAC_QUIRK_SLAVE 0x0004
955 
956 /*
957  * This adapter is a master.
958  */
959 #define AAC_QUIRK_MASTER 0x0008
960 
961 /*
962  * Some adapter firmware perform poorly when it must split up scatter gathers
963  * in order to deal with the limits of the underlying CHIM. This limit in this
964  * class of adapters is 17 scatter gather elements.
965  */
966 #define AAC_QUIRK_17SG	0x0010
967 
968 /*
969  *	Some adapter firmware does not support 64 bit scsi passthrough
970  * commands.
971  */
972 #define AAC_QUIRK_SCSI_32	0x0020
973 
974 /*
975  * SRC based adapters support the AifReqEvent functions
976  */
977 #define AAC_QUIRK_SRC 0x0040
978 
979 /*
980  *	The adapter interface specs all queues to be located in the same
981  *	physically contiguous block. The host structure that defines the
982  *	commuication queues will assume they are each a separate physically
983  *	contiguous memory region that will support them all being one big
984  *	contiguous block.
985  *	There is a command and response queue for each level and direction of
986  *	commuication. These regions are accessed by both the host and adapter.
987  */
988 
989 struct aac_queue {
990 	u64			logical;	/*address we give the adapter */
991 	struct aac_entry	*base;		/*system virtual address */
992 	struct aac_qhdr		headers;	/*producer,consumer q headers*/
993 	u32			entries;	/*Number of queue entries */
994 	wait_queue_head_t	qfull;		/*Event to wait on if q full */
995 	wait_queue_head_t	cmdready;	/*Cmd ready from the adapter */
996 		/* This is only valid for adapter to host command queues. */
997 	spinlock_t		*lock;		/* Spinlock for this queue must take this lock before accessing the lock */
998 	spinlock_t		lockdata;	/* Actual lock (used only on one side of the lock) */
999 	struct list_head	cmdq;		/* A queue of FIBs which need to be prcessed by the FS thread. This is */
1000 						/* only valid for command queues which receive entries from the adapter. */
1001 	/* Number of entries on outstanding queue. */
1002 	atomic_t		numpending;
1003 	struct aac_dev *	dev;		/* Back pointer to adapter structure */
1004 };
1005 
1006 /*
1007  *	Message queues. The order here is important, see also the
1008  *	queue type ordering
1009  */
1010 
1011 struct aac_queue_block
1012 {
1013 	struct aac_queue queue[8];
1014 };
1015 
1016 /*
1017  *	SaP1 Message Unit Registers
1018  */
1019 
1020 struct sa_drawbridge_CSR {
1021 				/*	Offset	|  Name */
1022 	__le32	reserved[10];	/*	00h-27h |  Reserved */
1023 	u8	LUT_Offset;	/*	28h	|  Lookup Table Offset */
1024 	u8	reserved1[3];	/*	29h-2bh	|  Reserved */
1025 	__le32	LUT_Data;	/*	2ch	|  Looup Table Data */
1026 	__le32	reserved2[26];	/*	30h-97h	|  Reserved */
1027 	__le16	PRICLEARIRQ;	/*	98h	|  Primary Clear Irq */
1028 	__le16	SECCLEARIRQ;	/*	9ah	|  Secondary Clear Irq */
1029 	__le16	PRISETIRQ;	/*	9ch	|  Primary Set Irq */
1030 	__le16	SECSETIRQ;	/*	9eh	|  Secondary Set Irq */
1031 	__le16	PRICLEARIRQMASK;/*	a0h	|  Primary Clear Irq Mask */
1032 	__le16	SECCLEARIRQMASK;/*	a2h	|  Secondary Clear Irq Mask */
1033 	__le16	PRISETIRQMASK;	/*	a4h	|  Primary Set Irq Mask */
1034 	__le16	SECSETIRQMASK;	/*	a6h	|  Secondary Set Irq Mask */
1035 	__le32	MAILBOX0;	/*	a8h	|  Scratchpad 0 */
1036 	__le32	MAILBOX1;	/*	ach	|  Scratchpad 1 */
1037 	__le32	MAILBOX2;	/*	b0h	|  Scratchpad 2 */
1038 	__le32	MAILBOX3;	/*	b4h	|  Scratchpad 3 */
1039 	__le32	MAILBOX4;	/*	b8h	|  Scratchpad 4 */
1040 	__le32	MAILBOX5;	/*	bch	|  Scratchpad 5 */
1041 	__le32	MAILBOX6;	/*	c0h	|  Scratchpad 6 */
1042 	__le32	MAILBOX7;	/*	c4h	|  Scratchpad 7 */
1043 	__le32	ROM_Setup_Data;	/*	c8h	|  Rom Setup and Data */
1044 	__le32	ROM_Control_Addr;/*	cch	|  Rom Control and Address */
1045 	__le32	reserved3[12];	/*	d0h-ffh	|  reserved */
1046 	__le32	LUT[64];	/*    100h-1ffh	|  Lookup Table Entries */
1047 };
1048 
1049 #define Mailbox0	SaDbCSR.MAILBOX0
1050 #define Mailbox1	SaDbCSR.MAILBOX1
1051 #define Mailbox2	SaDbCSR.MAILBOX2
1052 #define Mailbox3	SaDbCSR.MAILBOX3
1053 #define Mailbox4	SaDbCSR.MAILBOX4
1054 #define Mailbox5	SaDbCSR.MAILBOX5
1055 #define Mailbox6	SaDbCSR.MAILBOX6
1056 #define Mailbox7	SaDbCSR.MAILBOX7
1057 
1058 #define DoorbellReg_p SaDbCSR.PRISETIRQ
1059 #define DoorbellReg_s SaDbCSR.SECSETIRQ
1060 #define DoorbellClrReg_p SaDbCSR.PRICLEARIRQ
1061 
1062 
1063 #define	DOORBELL_0	0x0001
1064 #define DOORBELL_1	0x0002
1065 #define DOORBELL_2	0x0004
1066 #define DOORBELL_3	0x0008
1067 #define DOORBELL_4	0x0010
1068 #define DOORBELL_5	0x0020
1069 #define DOORBELL_6	0x0040
1070 
1071 
1072 #define PrintfReady	DOORBELL_5
1073 #define PrintfDone	DOORBELL_5
1074 
1075 struct sa_registers {
1076 	struct sa_drawbridge_CSR	SaDbCSR;			/* 98h - c4h */
1077 };
1078 
1079 
1080 #define SA_INIT_NUM_MSIXVECTORS		1
1081 #define SA_MINIPORT_REVISION		SA_INIT_NUM_MSIXVECTORS
1082 
1083 #define sa_readw(AEP, CSR)		readl(&((AEP)->regs.sa->CSR))
1084 #define sa_readl(AEP, CSR)		readl(&((AEP)->regs.sa->CSR))
1085 #define sa_writew(AEP, CSR, value)	writew(value, &((AEP)->regs.sa->CSR))
1086 #define sa_writel(AEP, CSR, value)	writel(value, &((AEP)->regs.sa->CSR))
1087 
1088 /*
1089  *	Rx Message Unit Registers
1090  */
1091 
1092 struct rx_mu_registers {
1093 			    /*	Local  | PCI*| Name */
1094 	__le32	ARSR;	    /*	1300h  | 00h | APIC Register Select Register */
1095 	__le32	reserved0;  /*	1304h  | 04h | Reserved */
1096 	__le32	AWR;	    /*	1308h  | 08h | APIC Window Register */
1097 	__le32	reserved1;  /*	130Ch  | 0Ch | Reserved */
1098 	__le32	IMRx[2];    /*	1310h  | 10h | Inbound Message Registers */
1099 	__le32	OMRx[2];    /*	1318h  | 18h | Outbound Message Registers */
1100 	__le32	IDR;	    /*	1320h  | 20h | Inbound Doorbell Register */
1101 	__le32	IISR;	    /*	1324h  | 24h | Inbound Interrupt
1102 						Status Register */
1103 	__le32	IIMR;	    /*	1328h  | 28h | Inbound Interrupt
1104 						Mask Register */
1105 	__le32	ODR;	    /*	132Ch  | 2Ch | Outbound Doorbell Register */
1106 	__le32	OISR;	    /*	1330h  | 30h | Outbound Interrupt
1107 						Status Register */
1108 	__le32	OIMR;	    /*	1334h  | 34h | Outbound Interrupt
1109 						Mask Register */
1110 	__le32	reserved2;  /*	1338h  | 38h | Reserved */
1111 	__le32	reserved3;  /*	133Ch  | 3Ch | Reserved */
1112 	__le32	InboundQueue;/*	1340h  | 40h | Inbound Queue Port relative to firmware */
1113 	__le32	OutboundQueue;/*1344h  | 44h | Outbound Queue Port relative to firmware */
1114 			    /* * Must access through ATU Inbound
1115 				 Translation Window */
1116 };
1117 
1118 struct rx_inbound {
1119 	__le32	Mailbox[8];
1120 };
1121 
1122 #define	INBOUNDDOORBELL_0	0x00000001
1123 #define INBOUNDDOORBELL_1	0x00000002
1124 #define INBOUNDDOORBELL_2	0x00000004
1125 #define INBOUNDDOORBELL_3	0x00000008
1126 #define INBOUNDDOORBELL_4	0x00000010
1127 #define INBOUNDDOORBELL_5	0x00000020
1128 #define INBOUNDDOORBELL_6	0x00000040
1129 
1130 #define	OUTBOUNDDOORBELL_0	0x00000001
1131 #define OUTBOUNDDOORBELL_1	0x00000002
1132 #define OUTBOUNDDOORBELL_2	0x00000004
1133 #define OUTBOUNDDOORBELL_3	0x00000008
1134 #define OUTBOUNDDOORBELL_4	0x00000010
1135 
1136 #define InboundDoorbellReg	MUnit.IDR
1137 #define OutboundDoorbellReg	MUnit.ODR
1138 
1139 struct rx_registers {
1140 	struct rx_mu_registers		MUnit;		/* 1300h - 1347h */
1141 	__le32				reserved1[2];	/* 1348h - 134ch */
1142 	struct rx_inbound		IndexRegs;
1143 };
1144 
1145 #define rx_readb(AEP, CSR)		readb(&((AEP)->regs.rx->CSR))
1146 #define rx_readl(AEP, CSR)		readl(&((AEP)->regs.rx->CSR))
1147 #define rx_writeb(AEP, CSR, value)	writeb(value, &((AEP)->regs.rx->CSR))
1148 #define rx_writel(AEP, CSR, value)	writel(value, &((AEP)->regs.rx->CSR))
1149 
1150 /*
1151  *	Rkt Message Unit Registers (same as Rx, except a larger reserve region)
1152  */
1153 
1154 #define rkt_mu_registers rx_mu_registers
1155 #define rkt_inbound rx_inbound
1156 
1157 struct rkt_registers {
1158 	struct rkt_mu_registers		MUnit;		 /* 1300h - 1347h */
1159 	__le32				reserved1[1006]; /* 1348h - 22fch */
1160 	struct rkt_inbound		IndexRegs;	 /* 2300h - */
1161 };
1162 
1163 #define rkt_readb(AEP, CSR)		readb(&((AEP)->regs.rkt->CSR))
1164 #define rkt_readl(AEP, CSR)		readl(&((AEP)->regs.rkt->CSR))
1165 #define rkt_writeb(AEP, CSR, value)	writeb(value, &((AEP)->regs.rkt->CSR))
1166 #define rkt_writel(AEP, CSR, value)	writel(value, &((AEP)->regs.rkt->CSR))
1167 
1168 /*
1169  * PMC SRC message unit registers
1170  */
1171 
1172 #define src_inbound rx_inbound
1173 
1174 struct src_mu_registers {
1175 				/*  PCI*| Name */
1176 	__le32	reserved0[6];	/*  00h | Reserved */
1177 	__le32	IOAR[2];	/*  18h | IOA->host interrupt register */
1178 	__le32	IDR;		/*  20h | Inbound Doorbell Register */
1179 	__le32	IISR;		/*  24h | Inbound Int. Status Register */
1180 	__le32	reserved1[3];	/*  28h | Reserved */
1181 	__le32	OIMR;		/*  34h | Outbound Int. Mask Register */
1182 	__le32	reserved2[25];  /*  38h | Reserved */
1183 	__le32	ODR_R;		/*  9ch | Outbound Doorbell Read */
1184 	__le32	ODR_C;		/*  a0h | Outbound Doorbell Clear */
1185 	__le32	reserved3[3];	/*  a4h | Reserved */
1186 	__le32	SCR0;		/*  b0h | Scratchpad 0 */
1187 	__le32	reserved4[2];	/*  b4h | Reserved */
1188 	__le32	OMR;		/*  bch | Outbound Message Register */
1189 	__le32	IQ_L;		/*  c0h | Inbound Queue (Low address) */
1190 	__le32	IQ_H;		/*  c4h | Inbound Queue (High address) */
1191 	__le32	ODR_MSI;	/*  c8h | MSI register for sync./AIF */
1192 	__le32  reserved5;	/*  cch | Reserved */
1193 	__le32	IQN_L;		/*  d0h | Inbound (native cmd) low  */
1194 	__le32	IQN_H;		/*  d4h | Inbound (native cmd) high */
1195 };
1196 
1197 struct src_registers {
1198 	struct src_mu_registers MUnit;	/* 00h - cbh */
1199 	union {
1200 		struct {
1201 			__le32 reserved1[130786];	/* d8h - 7fc5fh */
1202 			struct src_inbound IndexRegs;	/* 7fc60h */
1203 		} tupelo;
1204 		struct {
1205 			__le32 reserved1[970];		/* d8h - fffh */
1206 			struct src_inbound IndexRegs;	/* 1000h */
1207 		} denali;
1208 	} u;
1209 };
1210 
1211 #define src_readb(AEP, CSR)		readb(&((AEP)->regs.src.bar0->CSR))
1212 #define src_readl(AEP, CSR)		readl(&((AEP)->regs.src.bar0->CSR))
1213 #define src_writeb(AEP, CSR, value)	writeb(value, \
1214 						&((AEP)->regs.src.bar0->CSR))
1215 #define src_writel(AEP, CSR, value)	writel(value, \
1216 						&((AEP)->regs.src.bar0->CSR))
1217 #if defined(writeq)
1218 #define	src_writeq(AEP, CSR, value)	writeq(value, \
1219 						&((AEP)->regs.src.bar0->CSR))
1220 #endif
1221 
1222 #define SRC_ODR_SHIFT		12
1223 #define SRC_IDR_SHIFT		9
1224 #define SRC_MSI_READ_MASK	0x1000
1225 
1226 typedef void (*fib_callback)(void *ctxt, struct fib *fibctx);
1227 
1228 struct aac_fib_context {
1229 	s16			type;		// used for verification of structure
1230 	s16			size;
1231 	u32			unique;		// unique value representing this context
1232 	ulong			jiffies;	// used for cleanup - dmb changed to ulong
1233 	struct list_head	next;		// used to link context's into a linked list
1234 	struct completion	completion;	// this is used to wait for the next fib to arrive.
1235 	int			wait;		// Set to true when thread is in WaitForSingleObject
1236 	unsigned long		count;		// total number of FIBs on FibList
1237 	struct list_head	fib_list;	// this holds fibs and their attachd hw_fibs
1238 };
1239 
1240 struct sense_data {
1241 	u8 error_code;		/* 70h (current errors), 71h(deferred errors) */
1242 	u8 valid:1;		/* A valid bit of one indicates that the information  */
1243 				/* field contains valid information as defined in the
1244 				 * SCSI-2 Standard.
1245 				 */
1246 	u8 segment_number;	/* Only used for COPY, COMPARE, or COPY AND VERIFY Commands */
1247 	u8 sense_key:4;		/* Sense Key */
1248 	u8 reserved:1;
1249 	u8 ILI:1;		/* Incorrect Length Indicator */
1250 	u8 EOM:1;		/* End Of Medium - reserved for random access devices */
1251 	u8 filemark:1;		/* Filemark - reserved for random access devices */
1252 
1253 	u8 information[4];	/* for direct-access devices, contains the unsigned
1254 				 * logical block address or residue associated with
1255 				 * the sense key
1256 				 */
1257 	u8 add_sense_len;	/* number of additional sense bytes to follow this field */
1258 	u8 cmnd_info[4];	/* not used */
1259 	u8 ASC;			/* Additional Sense Code */
1260 	u8 ASCQ;		/* Additional Sense Code Qualifier */
1261 	u8 FRUC;		/* Field Replaceable Unit Code - not used */
1262 	u8 bit_ptr:3;		/* indicates which byte of the CDB or parameter data
1263 				 * was in error
1264 				 */
1265 	u8 BPV:1;		/* bit pointer valid (BPV): 1- indicates that
1266 				 * the bit_ptr field has valid value
1267 				 */
1268 	u8 reserved2:2;
1269 	u8 CD:1;		/* command data bit: 1- illegal parameter in CDB.
1270 				 * 0- illegal parameter in data.
1271 				 */
1272 	u8 SKSV:1;
1273 	u8 field_ptr[2];	/* byte of the CDB or parameter data in error */
1274 };
1275 
1276 struct fsa_dev_info {
1277 	u64		last;
1278 	u64		size;
1279 	u32		type;
1280 	u32		config_waiting_on;
1281 	unsigned long	config_waiting_stamp;
1282 	u16		queue_depth;
1283 	u8		config_needed;
1284 	u8		valid;
1285 	u8		ro;
1286 	u8		locked;
1287 	u8		deleted;
1288 	char		devname[8];
1289 	struct sense_data sense_data;
1290 	u32		block_size;
1291 	u8		identifier[16];
1292 };
1293 
1294 struct fib {
1295 	void			*next;	/* this is used by the allocator */
1296 	s16			type;
1297 	s16			size;
1298 	/*
1299 	 *	The Adapter that this I/O is destined for.
1300 	 */
1301 	struct aac_dev		*dev;
1302 	/*
1303 	 *	This is the event the sendfib routine will wait on if the
1304 	 *	caller did not pass one and this is synch io.
1305 	 */
1306 	struct completion	event_wait;
1307 	spinlock_t		event_lock;
1308 
1309 	u32			done;	/* gets set to 1 when fib is complete */
1310 	fib_callback		callback;
1311 	void			*callback_data;
1312 	u32			flags; // u32 dmb was ulong
1313 	/*
1314 	 *	And for the internal issue/reply queues (we may be able
1315 	 *	to merge these two)
1316 	 */
1317 	struct list_head	fiblink;
1318 	void			*data;
1319 	u32			vector_no;
1320 	struct hw_fib		*hw_fib_va;	/* also used for native */
1321 	dma_addr_t		hw_fib_pa;	/* physical address of hw_fib*/
1322 	dma_addr_t		hw_sgl_pa;	/* extra sgl for native */
1323 	dma_addr_t		hw_error_pa;	/* error buffer for native */
1324 	u32			hbacmd_size;	/* cmd size for native */
1325 };
1326 
1327 #define AAC_INIT			0
1328 #define AAC_RESCAN			1
1329 
1330 #define AAC_DEVTYPE_RAID_MEMBER	1
1331 #define AAC_DEVTYPE_ARC_RAW		2
1332 #define AAC_DEVTYPE_NATIVE_RAW		3
1333 
1334 #define AAC_RESCAN_DELAY		(10 * HZ)
1335 
1336 struct aac_hba_map_info {
1337 	__le32	rmw_nexus;		/* nexus for native HBA devices */
1338 	u8		devtype;	/* device type */
1339 	s8		reset_state;	/* 0 - no reset, 1..x - */
1340 					/* after xth TM LUN reset */
1341 	u16		qd_limit;
1342 	u32		scan_counter;
1343 	struct aac_ciss_identify_pd  *safw_identify_resp;
1344 };
1345 
1346 /*
1347  *	Adapter Information Block
1348  *
1349  *	This is returned by the RequestAdapterInfo block
1350  */
1351 
1352 struct aac_adapter_info
1353 {
1354 	__le32	platform;
1355 	__le32	cpu;
1356 	__le32	subcpu;
1357 	__le32	clock;
1358 	__le32	execmem;
1359 	__le32	buffermem;
1360 	__le32	totalmem;
1361 	__le32	kernelrev;
1362 	__le32	kernelbuild;
1363 	__le32	monitorrev;
1364 	__le32	monitorbuild;
1365 	__le32	hwrev;
1366 	__le32	hwbuild;
1367 	__le32	biosrev;
1368 	__le32	biosbuild;
1369 	__le32	cluster;
1370 	__le32	clusterchannelmask;
1371 	__le32	serial[2];
1372 	__le32	battery;
1373 	__le32	options;
1374 	__le32	OEM;
1375 };
1376 
1377 struct aac_supplement_adapter_info
1378 {
1379 	u8	adapter_type_text[17+1];
1380 	u8	pad[2];
1381 	__le32	flash_memory_byte_size;
1382 	__le32	flash_image_id;
1383 	__le32	max_number_ports;
1384 	__le32	version;
1385 	__le32	feature_bits;
1386 	u8	slot_number;
1387 	u8	reserved_pad0[3];
1388 	u8	build_date[12];
1389 	__le32	current_number_ports;
1390 	struct {
1391 		u8	assembly_pn[8];
1392 		u8	fru_pn[8];
1393 		u8	battery_fru_pn[8];
1394 		u8	ec_version_string[8];
1395 		u8	tsid[12];
1396 	}	vpd_info;
1397 	__le32	flash_firmware_revision;
1398 	__le32	flash_firmware_build;
1399 	__le32	raid_type_morph_options;
1400 	__le32	flash_firmware_boot_revision;
1401 	__le32	flash_firmware_boot_build;
1402 	u8	mfg_pcba_serial_no[12];
1403 	u8	mfg_wwn_name[8];
1404 	__le32	supported_options2;
1405 	__le32	struct_expansion;
1406 	/* StructExpansion == 1 */
1407 	__le32	feature_bits3;
1408 	__le32	supported_performance_modes;
1409 	u8	host_bus_type;		/* uses HOST_BUS_TYPE_xxx defines */
1410 	u8	host_bus_width;		/* actual width in bits or links */
1411 	u16	host_bus_speed;		/* actual bus speed/link rate in MHz */
1412 	u8	max_rrc_drives;		/* max. number of ITP-RRC drives/pool */
1413 	u8	max_disk_xtasks;	/* max. possible num of DiskX Tasks */
1414 
1415 	u8	cpld_ver_loaded;
1416 	u8	cpld_ver_in_flash;
1417 
1418 	__le64	max_rrc_capacity;
1419 	__le32	compiled_max_hist_log_level;
1420 	u8	custom_board_name[12];
1421 	u16	supported_cntlr_mode;	/* identify supported controller mode */
1422 	u16	reserved_for_future16;
1423 	__le32	supported_options3;	/* reserved for future options */
1424 
1425 	__le16	virt_device_bus;		/* virt. SCSI device for Thor */
1426 	__le16	virt_device_target;
1427 	__le16	virt_device_lun;
1428 	__le16	unused;
1429 	__le32	reserved_for_future_growth[68];
1430 
1431 };
1432 #define AAC_FEATURE_FALCON	cpu_to_le32(0x00000010)
1433 #define AAC_FEATURE_JBOD	cpu_to_le32(0x08000000)
1434 /* SupportedOptions2 */
1435 #define AAC_OPTION_MU_RESET		cpu_to_le32(0x00000001)
1436 #define AAC_OPTION_IGNORE_RESET		cpu_to_le32(0x00000002)
1437 #define AAC_OPTION_POWER_MANAGEMENT	cpu_to_le32(0x00000004)
1438 #define AAC_OPTION_DOORBELL_RESET	cpu_to_le32(0x00004000)
1439 /* 4KB sector size */
1440 #define AAC_OPTION_VARIABLE_BLOCK_SIZE	cpu_to_le32(0x00040000)
1441 /* 240 simple volume support */
1442 #define AAC_OPTION_SUPPORTED_240_VOLUMES cpu_to_le32(0x10000000)
1443 /*
1444  * Supports FIB dump sync command send prior to IOP_RESET
1445  */
1446 #define AAC_OPTION_SUPPORTED3_IOP_RESET_FIB_DUMP	cpu_to_le32(0x00004000)
1447 #define AAC_SIS_VERSION_V3	3
1448 #define AAC_SIS_SLOT_UNKNOWN	0xFF
1449 
1450 #define GetBusInfo 0x00000009
1451 struct aac_bus_info {
1452 	__le32	Command;	/* VM_Ioctl */
1453 	__le32	ObjType;	/* FT_DRIVE */
1454 	__le32	MethodId;	/* 1 = SCSI Layer */
1455 	__le32	ObjectId;	/* Handle */
1456 	__le32	CtlCmd;		/* GetBusInfo */
1457 };
1458 
1459 struct aac_bus_info_response {
1460 	__le32	Status;		/* ST_OK */
1461 	__le32	ObjType;
1462 	__le32	MethodId;	/* unused */
1463 	__le32	ObjectId;	/* unused */
1464 	__le32	CtlCmd;		/* unused */
1465 	__le32	ProbeComplete;
1466 	__le32	BusCount;
1467 	__le32	TargetsPerBus;
1468 	u8	InitiatorBusId[10];
1469 	u8	BusValid[10];
1470 };
1471 
1472 /*
1473  * Battery platforms
1474  */
1475 #define AAC_BAT_REQ_PRESENT	(1)
1476 #define AAC_BAT_REQ_NOTPRESENT	(2)
1477 #define AAC_BAT_OPT_PRESENT	(3)
1478 #define AAC_BAT_OPT_NOTPRESENT	(4)
1479 #define AAC_BAT_NOT_SUPPORTED	(5)
1480 /*
1481  * cpu types
1482  */
1483 #define AAC_CPU_SIMULATOR	(1)
1484 #define AAC_CPU_I960		(2)
1485 #define AAC_CPU_STRONGARM	(3)
1486 
1487 /*
1488  * Supported Options
1489  */
1490 #define AAC_OPT_SNAPSHOT		cpu_to_le32(1)
1491 #define AAC_OPT_CLUSTERS		cpu_to_le32(1<<1)
1492 #define AAC_OPT_WRITE_CACHE		cpu_to_le32(1<<2)
1493 #define AAC_OPT_64BIT_DATA		cpu_to_le32(1<<3)
1494 #define AAC_OPT_HOST_TIME_FIB		cpu_to_le32(1<<4)
1495 #define AAC_OPT_RAID50			cpu_to_le32(1<<5)
1496 #define AAC_OPT_4GB_WINDOW		cpu_to_le32(1<<6)
1497 #define AAC_OPT_SCSI_UPGRADEABLE	cpu_to_le32(1<<7)
1498 #define AAC_OPT_SOFT_ERR_REPORT		cpu_to_le32(1<<8)
1499 #define AAC_OPT_SUPPORTED_RECONDITION	cpu_to_le32(1<<9)
1500 #define AAC_OPT_SGMAP_HOST64		cpu_to_le32(1<<10)
1501 #define AAC_OPT_ALARM			cpu_to_le32(1<<11)
1502 #define AAC_OPT_NONDASD			cpu_to_le32(1<<12)
1503 #define AAC_OPT_SCSI_MANAGED		cpu_to_le32(1<<13)
1504 #define AAC_OPT_RAID_SCSI_MODE		cpu_to_le32(1<<14)
1505 #define AAC_OPT_SUPPLEMENT_ADAPTER_INFO	cpu_to_le32(1<<16)
1506 #define AAC_OPT_NEW_COMM		cpu_to_le32(1<<17)
1507 #define AAC_OPT_NEW_COMM_64		cpu_to_le32(1<<18)
1508 #define AAC_OPT_EXTENDED		cpu_to_le32(1<<23)
1509 #define AAC_OPT_NATIVE_HBA		cpu_to_le32(1<<25)
1510 #define AAC_OPT_NEW_COMM_TYPE1		cpu_to_le32(1<<28)
1511 #define AAC_OPT_NEW_COMM_TYPE2		cpu_to_le32(1<<29)
1512 #define AAC_OPT_NEW_COMM_TYPE3		cpu_to_le32(1<<30)
1513 #define AAC_OPT_NEW_COMM_TYPE4		cpu_to_le32(1<<31)
1514 
1515 #define AAC_COMM_PRODUCER		0
1516 #define AAC_COMM_MESSAGE		1
1517 #define AAC_COMM_MESSAGE_TYPE1		3
1518 #define AAC_COMM_MESSAGE_TYPE2		4
1519 #define AAC_COMM_MESSAGE_TYPE3		5
1520 
1521 #define AAC_EXTOPT_SA_FIRMWARE		cpu_to_le32(1<<1)
1522 #define AAC_EXTOPT_SOFT_RESET		cpu_to_le32(1<<16)
1523 
1524 /* MSIX context */
1525 struct aac_msix_ctx {
1526 	int		vector_no;
1527 	struct aac_dev	*dev;
1528 };
1529 
1530 struct aac_dev
1531 {
1532 	struct list_head	entry;
1533 	const char		*name;
1534 	int			id;
1535 
1536 	/*
1537 	 *	negotiated FIB settings
1538 	 */
1539 	unsigned int		max_fib_size;
1540 	unsigned int		sg_tablesize;
1541 	unsigned int		max_num_aif;
1542 
1543 	unsigned int		max_cmd_size;	/* max_fib_size or MAX_NATIVE */
1544 
1545 	/*
1546 	 *	Map for 128 fib objects (64k)
1547 	 */
1548 	dma_addr_t		hw_fib_pa;	/* also used for native cmd */
1549 	struct hw_fib		*hw_fib_va;	/* also used for native cmd */
1550 	struct hw_fib		*aif_base_va;
1551 	/*
1552 	 *	Fib Headers
1553 	 */
1554 	struct fib              *fibs;
1555 
1556 	struct fib		*free_fib;
1557 	spinlock_t		fib_lock;
1558 
1559 	struct mutex		ioctl_mutex;
1560 	struct mutex		scan_mutex;
1561 	struct aac_queue_block *queues;
1562 	/*
1563 	 *	The user API will use an IOCTL to register itself to receive
1564 	 *	FIBs from the adapter.  The following list is used to keep
1565 	 *	track of all the threads that have requested these FIBs.  The
1566 	 *	mutex is used to synchronize access to all data associated
1567 	 *	with the adapter fibs.
1568 	 */
1569 	struct list_head	fib_list;
1570 
1571 	struct adapter_ops	a_ops;
1572 	unsigned long		fsrev;		/* Main driver's revision number */
1573 
1574 	resource_size_t		base_start;	/* main IO base */
1575 	resource_size_t		dbg_base;	/* address of UART
1576 						 * debug buffer */
1577 
1578 	resource_size_t		base_size, dbg_size;	/* Size of
1579 							 *  mapped in region */
1580 	/*
1581 	 * Holds initialization info
1582 	 * to communicate with adapter
1583 	 */
1584 	union aac_init		*init;
1585 	dma_addr_t		init_pa;	/* Holds physical address of the init struct */
1586 	/* response queue (if AAC_COMM_MESSAGE_TYPE1) */
1587 	__le32			*host_rrq;
1588 	dma_addr_t		host_rrq_pa;	/* phys. address */
1589 	/* index into rrq buffer */
1590 	u32			host_rrq_idx[AAC_MAX_MSIX];
1591 	atomic_t		rrq_outstanding[AAC_MAX_MSIX];
1592 	u32			fibs_pushed_no;
1593 	struct pci_dev		*pdev;		/* Our PCI interface */
1594 	/* pointer to buffer used for printf's from the adapter */
1595 	void			*printfbuf;
1596 	void			*comm_addr;	/* Base address of Comm area */
1597 	dma_addr_t		comm_phys;	/* Physical Address of Comm area */
1598 	size_t			comm_size;
1599 
1600 	struct Scsi_Host	*scsi_host_ptr;
1601 	int			maximum_num_containers;
1602 	int			maximum_num_physicals;
1603 	int			maximum_num_channels;
1604 	struct fsa_dev_info	*fsa_dev;
1605 	struct task_struct	*thread;
1606 	struct delayed_work	safw_rescan_work;
1607 	struct delayed_work	src_reinit_aif_worker;
1608 	int			cardtype;
1609 	/*
1610 	 *This lock will protect the two 32-bit
1611 	 *writes to the Inbound Queue
1612 	 */
1613 	spinlock_t		iq_lock;
1614 
1615 	/*
1616 	 *	The following is the device specific extension.
1617 	 */
1618 #ifndef AAC_MIN_FOOTPRINT_SIZE
1619 #	define AAC_MIN_FOOTPRINT_SIZE 8192
1620 #	define AAC_MIN_SRC_BAR0_SIZE 0x400000
1621 #	define AAC_MIN_SRC_BAR1_SIZE 0x800
1622 #	define AAC_MIN_SRCV_BAR0_SIZE 0x100000
1623 #	define AAC_MIN_SRCV_BAR1_SIZE 0x400
1624 #endif
1625 	union
1626 	{
1627 		struct sa_registers __iomem *sa;
1628 		struct rx_registers __iomem *rx;
1629 		struct rkt_registers __iomem *rkt;
1630 		struct {
1631 			struct src_registers __iomem *bar0;
1632 			char __iomem *bar1;
1633 		} src;
1634 	} regs;
1635 	volatile void __iomem *base, *dbg_base_mapped;
1636 	volatile struct rx_inbound __iomem *IndexRegs;
1637 	u32			OIMR; /* Mask Register Cache */
1638 	/*
1639 	 *	AIF thread states
1640 	 */
1641 	u32			aif_thread;
1642 	struct aac_adapter_info adapter_info;
1643 	struct aac_supplement_adapter_info supplement_adapter_info;
1644 	/* These are in adapter info but they are in the io flow so
1645 	 * lets break them out so we don't have to do an AND to check them
1646 	 */
1647 	u8			nondasd_support;
1648 	u8			jbod;
1649 	u8			cache_protected;
1650 	u8			dac_support;
1651 	u8			needs_dac;
1652 	u8			raid_scsi_mode;
1653 	u8			comm_interface;
1654 	u8			raw_io_interface;
1655 	u8			raw_io_64;
1656 	u8			printf_enabled;
1657 	u8			in_reset;
1658 	u8			in_soft_reset;
1659 	u8			msi;
1660 	u8			sa_firmware;
1661 	int			management_fib_count;
1662 	spinlock_t		manage_lock;
1663 	spinlock_t		sync_lock;
1664 	int			sync_mode;
1665 	struct fib		*sync_fib;
1666 	struct list_head	sync_fib_list;
1667 	u32			doorbell_mask;
1668 	u32			max_msix;	/* max. MSI-X vectors */
1669 	u32			vector_cap;	/* MSI-X vector capab.*/
1670 	int			msi_enabled;	/* MSI/MSI-X enabled */
1671 	atomic_t		msix_counter;
1672 	u32			scan_counter;
1673 	struct msix_entry	msixentry[AAC_MAX_MSIX];
1674 	struct aac_msix_ctx	aac_msix[AAC_MAX_MSIX]; /* context */
1675 	struct aac_hba_map_info	hba_map[AAC_MAX_BUSES][AAC_MAX_TARGETS];
1676 	struct aac_ciss_phys_luns_resp *safw_phys_luns;
1677 	u8			adapter_shutdown;
1678 	u32			handle_pci_error;
1679 	bool			init_reset;
1680 	u8			soft_reset_support;
1681 };
1682 
1683 #define aac_adapter_interrupt(dev) \
1684 	(dev)->a_ops.adapter_interrupt(dev)
1685 
1686 #define aac_adapter_notify(dev, event) \
1687 	(dev)->a_ops.adapter_notify(dev, event)
1688 
1689 #define aac_adapter_disable_int(dev) \
1690 	(dev)->a_ops.adapter_disable_int(dev)
1691 
1692 #define aac_adapter_enable_int(dev) \
1693 	(dev)->a_ops.adapter_enable_int(dev)
1694 
1695 #define aac_adapter_sync_cmd(dev, command, p1, p2, p3, p4, p5, p6, status, r1, r2, r3, r4) \
1696 	(dev)->a_ops.adapter_sync_cmd(dev, command, p1, p2, p3, p4, p5, p6, status, r1, r2, r3, r4)
1697 
1698 #define aac_adapter_restart(dev, bled, reset_type) \
1699 	((dev)->a_ops.adapter_restart(dev, bled, reset_type))
1700 
1701 #define aac_adapter_start(dev) \
1702 	((dev)->a_ops.adapter_start(dev))
1703 
1704 #define aac_adapter_ioremap(dev, size) \
1705 	(dev)->a_ops.adapter_ioremap(dev, size)
1706 
1707 #define aac_adapter_deliver(fib) \
1708 	((fib)->dev)->a_ops.adapter_deliver(fib)
1709 
1710 #define aac_adapter_bounds(dev,cmd,lba) \
1711 	dev->a_ops.adapter_bounds(dev,cmd,lba)
1712 
1713 #define aac_adapter_read(fib,cmd,lba,count) \
1714 	((fib)->dev)->a_ops.adapter_read(fib,cmd,lba,count)
1715 
1716 #define aac_adapter_write(fib,cmd,lba,count,fua) \
1717 	((fib)->dev)->a_ops.adapter_write(fib,cmd,lba,count,fua)
1718 
1719 #define aac_adapter_scsi(fib,cmd) \
1720 	((fib)->dev)->a_ops.adapter_scsi(fib,cmd)
1721 
1722 #define aac_adapter_comm(dev,comm) \
1723 	(dev)->a_ops.adapter_comm(dev, comm)
1724 
1725 #define FIB_CONTEXT_FLAG_TIMED_OUT		(0x00000001)
1726 #define FIB_CONTEXT_FLAG			(0x00000002)
1727 #define FIB_CONTEXT_FLAG_WAIT			(0x00000004)
1728 #define FIB_CONTEXT_FLAG_FASTRESP		(0x00000008)
1729 #define FIB_CONTEXT_FLAG_NATIVE_HBA		(0x00000010)
1730 #define FIB_CONTEXT_FLAG_NATIVE_HBA_TMF	(0x00000020)
1731 #define FIB_CONTEXT_FLAG_SCSI_CMD	(0x00000040)
1732 #define FIB_CONTEXT_FLAG_EH_RESET	(0x00000080)
1733 
1734 /*
1735  *	Define the command values
1736  */
1737 
1738 #define		Null			0
1739 #define		GetAttributes		1
1740 #define		SetAttributes		2
1741 #define		Lookup			3
1742 #define		ReadLink		4
1743 #define		Read			5
1744 #define		Write			6
1745 #define		Create			7
1746 #define		MakeDirectory		8
1747 #define		SymbolicLink		9
1748 #define		MakeNode		10
1749 #define		Removex			11
1750 #define		RemoveDirectoryx	12
1751 #define		Rename			13
1752 #define		Link			14
1753 #define		ReadDirectory		15
1754 #define		ReadDirectoryPlus	16
1755 #define		FileSystemStatus	17
1756 #define		FileSystemInfo		18
1757 #define		PathConfigure		19
1758 #define		Commit			20
1759 #define		Mount			21
1760 #define		UnMount			22
1761 #define		Newfs			23
1762 #define		FsCheck			24
1763 #define		FsSync			25
1764 #define		SimReadWrite		26
1765 #define		SetFileSystemStatus	27
1766 #define		BlockRead		28
1767 #define		BlockWrite		29
1768 #define		NvramIoctl		30
1769 #define		FsSyncWait		31
1770 #define		ClearArchiveBit		32
1771 #define		SetAcl			33
1772 #define		GetAcl			34
1773 #define		AssignAcl		35
1774 #define		FaultInsertion		36	/* Fault Insertion Command */
1775 #define		CrazyCache		37	/* Crazycache */
1776 
1777 #define		MAX_FSACOMMAND_NUM	38
1778 
1779 
1780 /*
1781  *	Define the status returns. These are very unixlike although
1782  *	most are not in fact used
1783  */
1784 
1785 #define		ST_OK		0
1786 #define		ST_PERM		1
1787 #define		ST_NOENT	2
1788 #define		ST_IO		5
1789 #define		ST_NXIO		6
1790 #define		ST_E2BIG	7
1791 #define		ST_MEDERR	8
1792 #define		ST_ACCES	13
1793 #define		ST_EXIST	17
1794 #define		ST_XDEV		18
1795 #define		ST_NODEV	19
1796 #define		ST_NOTDIR	20
1797 #define		ST_ISDIR	21
1798 #define		ST_INVAL	22
1799 #define		ST_FBIG		27
1800 #define		ST_NOSPC	28
1801 #define		ST_ROFS		30
1802 #define		ST_MLINK	31
1803 #define		ST_WOULDBLOCK	35
1804 #define		ST_NAMETOOLONG	63
1805 #define		ST_NOTEMPTY	66
1806 #define		ST_DQUOT	69
1807 #define		ST_STALE	70
1808 #define		ST_REMOTE	71
1809 #define		ST_NOT_READY	72
1810 #define		ST_BADHANDLE	10001
1811 #define		ST_NOT_SYNC	10002
1812 #define		ST_BAD_COOKIE	10003
1813 #define		ST_NOTSUPP	10004
1814 #define		ST_TOOSMALL	10005
1815 #define		ST_SERVERFAULT	10006
1816 #define		ST_BADTYPE	10007
1817 #define		ST_JUKEBOX	10008
1818 #define		ST_NOTMOUNTED	10009
1819 #define		ST_MAINTMODE	10010
1820 #define		ST_STALEACL	10011
1821 
1822 /*
1823  *	On writes how does the client want the data written.
1824  */
1825 
1826 #define	CACHE_CSTABLE		1
1827 #define CACHE_UNSTABLE		2
1828 
1829 /*
1830  *	Lets the client know at which level the data was committed on
1831  *	a write request
1832  */
1833 
1834 #define	CMFILE_SYNCH_NVRAM	1
1835 #define	CMDATA_SYNCH_NVRAM	2
1836 #define	CMFILE_SYNCH		3
1837 #define CMDATA_SYNCH		4
1838 #define CMUNSTABLE		5
1839 
1840 #define	RIO_TYPE_WRITE 			0x0000
1841 #define	RIO_TYPE_READ			0x0001
1842 #define	RIO_SUREWRITE			0x0008
1843 
1844 #define RIO2_IO_TYPE			0x0003
1845 #define RIO2_IO_TYPE_WRITE		0x0000
1846 #define RIO2_IO_TYPE_READ		0x0001
1847 #define RIO2_IO_TYPE_VERIFY		0x0002
1848 #define RIO2_IO_ERROR			0x0004
1849 #define RIO2_IO_SUREWRITE		0x0008
1850 #define RIO2_SGL_CONFORMANT		0x0010
1851 #define RIO2_SG_FORMAT			0xF000
1852 #define RIO2_SG_FORMAT_ARC		0x0000
1853 #define RIO2_SG_FORMAT_SRL		0x1000
1854 #define RIO2_SG_FORMAT_IEEE1212		0x2000
1855 
1856 struct aac_read
1857 {
1858 	__le32		command;
1859 	__le32		cid;
1860 	__le32		block;
1861 	__le32		count;
1862 	struct sgmap	sg;	// Must be last in struct because it is variable
1863 };
1864 
1865 struct aac_read64
1866 {
1867 	__le32		command;
1868 	__le16		cid;
1869 	__le16		sector_count;
1870 	__le32		block;
1871 	__le16		pad;
1872 	__le16		flags;
1873 	struct sgmap64	sg;	// Must be last in struct because it is variable
1874 };
1875 
1876 struct aac_read_reply
1877 {
1878 	__le32		status;
1879 	__le32		count;
1880 };
1881 
1882 struct aac_write
1883 {
1884 	__le32		command;
1885 	__le32		cid;
1886 	__le32		block;
1887 	__le32		count;
1888 	__le32		stable;	// Not used
1889 	struct sgmap	sg;	// Must be last in struct because it is variable
1890 };
1891 
1892 struct aac_write64
1893 {
1894 	__le32		command;
1895 	__le16		cid;
1896 	__le16		sector_count;
1897 	__le32		block;
1898 	__le16		pad;
1899 	__le16		flags;
1900 	struct sgmap64	sg;	// Must be last in struct because it is variable
1901 };
1902 struct aac_write_reply
1903 {
1904 	__le32		status;
1905 	__le32		count;
1906 	__le32		committed;
1907 };
1908 
1909 struct aac_raw_io
1910 {
1911 	__le32		block[2];
1912 	__le32		count;
1913 	__le16		cid;
1914 	__le16		flags;		/* 00 W, 01 R */
1915 	__le16		bpTotal;	/* reserved for F/W use */
1916 	__le16		bpComplete;	/* reserved for F/W use */
1917 	struct sgmapraw	sg;
1918 };
1919 
1920 struct aac_raw_io2 {
1921 	__le32		blockLow;
1922 	__le32		blockHigh;
1923 	__le32		byteCount;
1924 	__le16		cid;
1925 	__le16		flags;		/* RIO2 flags */
1926 	__le32		sgeFirstSize;	/* size of first sge el. */
1927 	__le32		sgeNominalSize;	/* size of 2nd sge el. (if conformant) */
1928 	u8		sgeCnt;		/* only 8 bits required */
1929 	u8		bpTotal;	/* reserved for F/W use */
1930 	u8		bpComplete;	/* reserved for F/W use */
1931 	u8		sgeFirstIndex;	/* reserved for F/W use */
1932 	u8		unused[4];
1933 	struct sge_ieee1212	sge[];
1934 };
1935 
1936 #define CT_FLUSH_CACHE 129
1937 struct aac_synchronize {
1938 	__le32		command;	/* VM_ContainerConfig */
1939 	__le32		type;		/* CT_FLUSH_CACHE */
1940 	__le32		cid;
1941 	__le32		parm1;
1942 	__le32		parm2;
1943 	__le32		parm3;
1944 	__le32		parm4;
1945 	__le32		count;	/* sizeof(((struct aac_synchronize_reply *)NULL)->data) */
1946 };
1947 
1948 struct aac_synchronize_reply {
1949 	__le32		dummy0;
1950 	__le32		dummy1;
1951 	__le32		status;	/* CT_OK */
1952 	__le32		parm1;
1953 	__le32		parm2;
1954 	__le32		parm3;
1955 	__le32		parm4;
1956 	__le32		parm5;
1957 	u8		data[16];
1958 };
1959 
1960 #define CT_POWER_MANAGEMENT	245
1961 #define CT_PM_START_UNIT	2
1962 #define CT_PM_STOP_UNIT		3
1963 #define CT_PM_UNIT_IMMEDIATE	1
1964 struct aac_power_management {
1965 	__le32		command;	/* VM_ContainerConfig */
1966 	__le32		type;		/* CT_POWER_MANAGEMENT */
1967 	__le32		sub;		/* CT_PM_* */
1968 	__le32		cid;
1969 	__le32		parm;		/* CT_PM_sub_* */
1970 };
1971 
1972 #define CT_PAUSE_IO    65
1973 #define CT_RELEASE_IO  66
1974 struct aac_pause {
1975 	__le32		command;	/* VM_ContainerConfig */
1976 	__le32		type;		/* CT_PAUSE_IO */
1977 	__le32		timeout;	/* 10ms ticks */
1978 	__le32		min;
1979 	__le32		noRescan;
1980 	__le32		parm3;
1981 	__le32		parm4;
1982 	__le32		count;	/* sizeof(((struct aac_pause_reply *)NULL)->data) */
1983 };
1984 
1985 struct aac_srb
1986 {
1987 	__le32		function;
1988 	__le32		channel;
1989 	__le32		id;
1990 	__le32		lun;
1991 	__le32		timeout;
1992 	__le32		flags;
1993 	__le32		count;		// Data xfer size
1994 	__le32		retry_limit;
1995 	__le32		cdb_size;
1996 	u8		cdb[16];
1997 	struct	sgmap	sg;
1998 };
1999 
2000 /*
2001  * This and associated data structs are used by the
2002  * ioctl caller and are in cpu order.
2003  */
2004 struct user_aac_srb
2005 {
2006 	u32		function;
2007 	u32		channel;
2008 	u32		id;
2009 	u32		lun;
2010 	u32		timeout;
2011 	u32		flags;
2012 	u32		count;		// Data xfer size
2013 	u32		retry_limit;
2014 	u32		cdb_size;
2015 	u8		cdb[16];
2016 	struct	user_sgmap	sg;
2017 };
2018 
2019 #define		AAC_SENSE_BUFFERSIZE	 30
2020 
2021 struct aac_srb_reply
2022 {
2023 	__le32		status;
2024 	__le32		srb_status;
2025 	__le32		scsi_status;
2026 	__le32		data_xfer_length;
2027 	__le32		sense_data_size;
2028 	u8		sense_data[AAC_SENSE_BUFFERSIZE]; // Can this be SCSI_SENSE_BUFFERSIZE
2029 };
2030 
2031 struct aac_srb_unit {
2032 	struct aac_srb		srb;
2033 	struct aac_srb_reply	srb_reply;
2034 };
2035 
2036 /*
2037  * SRB Flags
2038  */
2039 #define		SRB_NoDataXfer		 0x0000
2040 #define		SRB_DisableDisconnect	 0x0004
2041 #define		SRB_DisableSynchTransfer 0x0008
2042 #define		SRB_BypassFrozenQueue	 0x0010
2043 #define		SRB_DisableAutosense	 0x0020
2044 #define		SRB_DataIn		 0x0040
2045 #define		SRB_DataOut		 0x0080
2046 
2047 /*
2048  * SRB Functions - set in aac_srb->function
2049  */
2050 #define	SRBF_ExecuteScsi	0x0000
2051 #define	SRBF_ClaimDevice	0x0001
2052 #define	SRBF_IO_Control		0x0002
2053 #define	SRBF_ReceiveEvent	0x0003
2054 #define	SRBF_ReleaseQueue	0x0004
2055 #define	SRBF_AttachDevice	0x0005
2056 #define	SRBF_ReleaseDevice	0x0006
2057 #define	SRBF_Shutdown		0x0007
2058 #define	SRBF_Flush		0x0008
2059 #define	SRBF_AbortCommand	0x0010
2060 #define	SRBF_ReleaseRecovery	0x0011
2061 #define	SRBF_ResetBus		0x0012
2062 #define	SRBF_ResetDevice	0x0013
2063 #define	SRBF_TerminateIO	0x0014
2064 #define	SRBF_FlushQueue		0x0015
2065 #define	SRBF_RemoveDevice	0x0016
2066 #define	SRBF_DomainValidation	0x0017
2067 
2068 /*
2069  * SRB SCSI Status - set in aac_srb->scsi_status
2070  */
2071 #define SRB_STATUS_PENDING                  0x00
2072 #define SRB_STATUS_SUCCESS                  0x01
2073 #define SRB_STATUS_ABORTED                  0x02
2074 #define SRB_STATUS_ABORT_FAILED             0x03
2075 #define SRB_STATUS_ERROR                    0x04
2076 #define SRB_STATUS_BUSY                     0x05
2077 #define SRB_STATUS_INVALID_REQUEST          0x06
2078 #define SRB_STATUS_INVALID_PATH_ID          0x07
2079 #define SRB_STATUS_NO_DEVICE                0x08
2080 #define SRB_STATUS_TIMEOUT                  0x09
2081 #define SRB_STATUS_SELECTION_TIMEOUT        0x0A
2082 #define SRB_STATUS_COMMAND_TIMEOUT          0x0B
2083 #define SRB_STATUS_MESSAGE_REJECTED         0x0D
2084 #define SRB_STATUS_BUS_RESET                0x0E
2085 #define SRB_STATUS_PARITY_ERROR             0x0F
2086 #define SRB_STATUS_REQUEST_SENSE_FAILED     0x10
2087 #define SRB_STATUS_NO_HBA                   0x11
2088 #define SRB_STATUS_DATA_OVERRUN             0x12
2089 #define SRB_STATUS_UNEXPECTED_BUS_FREE      0x13
2090 #define SRB_STATUS_PHASE_SEQUENCE_FAILURE   0x14
2091 #define SRB_STATUS_BAD_SRB_BLOCK_LENGTH     0x15
2092 #define SRB_STATUS_REQUEST_FLUSHED          0x16
2093 #define SRB_STATUS_DELAYED_RETRY	    0x17
2094 #define SRB_STATUS_INVALID_LUN              0x20
2095 #define SRB_STATUS_INVALID_TARGET_ID        0x21
2096 #define SRB_STATUS_BAD_FUNCTION             0x22
2097 #define SRB_STATUS_ERROR_RECOVERY           0x23
2098 #define SRB_STATUS_NOT_STARTED		    0x24
2099 #define SRB_STATUS_NOT_IN_USE		    0x30
2100 #define SRB_STATUS_FORCE_ABORT		    0x31
2101 #define SRB_STATUS_DOMAIN_VALIDATION_FAIL   0x32
2102 
2103 /*
2104  * Object-Server / Volume-Manager Dispatch Classes
2105  */
2106 
2107 #define		VM_Null			0
2108 #define		VM_NameServe		1
2109 #define		VM_ContainerConfig	2
2110 #define		VM_Ioctl		3
2111 #define		VM_FilesystemIoctl	4
2112 #define		VM_CloseAll		5
2113 #define		VM_CtBlockRead		6
2114 #define		VM_CtBlockWrite		7
2115 #define		VM_SliceBlockRead	8	/* raw access to configured "storage objects" */
2116 #define		VM_SliceBlockWrite	9
2117 #define		VM_DriveBlockRead	10	/* raw access to physical devices */
2118 #define		VM_DriveBlockWrite	11
2119 #define		VM_EnclosureMgt		12	/* enclosure management */
2120 #define		VM_Unused		13	/* used to be diskset management */
2121 #define		VM_CtBlockVerify	14
2122 #define		VM_CtPerf		15	/* performance test */
2123 #define		VM_CtBlockRead64	16
2124 #define		VM_CtBlockWrite64	17
2125 #define		VM_CtBlockVerify64	18
2126 #define		VM_CtHostRead64		19
2127 #define		VM_CtHostWrite64	20
2128 #define		VM_DrvErrTblLog		21
2129 #define		VM_NameServe64		22
2130 #define		VM_NameServeAllBlk	30
2131 
2132 #define		MAX_VMCOMMAND_NUM	23	/* used for sizing stats array - leave last */
2133 
2134 /*
2135  *	Descriptive information (eg, vital stats)
2136  *	that a content manager might report.  The
2137  *	FileArray filesystem component is one example
2138  *	of a content manager.  Raw mode might be
2139  *	another.
2140  */
2141 
2142 struct aac_fsinfo {
2143 	__le32  fsTotalSize;	/* Consumed by fs, incl. metadata */
2144 	__le32  fsBlockSize;
2145 	__le32  fsFragSize;
2146 	__le32  fsMaxExtendSize;
2147 	__le32  fsSpaceUnits;
2148 	__le32  fsMaxNumFiles;
2149 	__le32  fsNumFreeFiles;
2150 	__le32  fsInodeDensity;
2151 };	/* valid iff ObjType == FT_FILESYS && !(ContentState & FSCS_NOTCLEAN) */
2152 
2153 struct  aac_blockdevinfo {
2154 	__le32	block_size;
2155 	__le32  logical_phys_map;
2156 	u8	identifier[16];
2157 };
2158 
2159 union aac_contentinfo {
2160 	struct	aac_fsinfo		filesys;
2161 	struct	aac_blockdevinfo	bdevinfo;
2162 };
2163 
2164 /*
2165  *	Query for Container Configuration Status
2166  */
2167 
2168 #define CT_GET_CONFIG_STATUS 147
2169 struct aac_get_config_status {
2170 	__le32		command;	/* VM_ContainerConfig */
2171 	__le32		type;		/* CT_GET_CONFIG_STATUS */
2172 	__le32		parm1;
2173 	__le32		parm2;
2174 	__le32		parm3;
2175 	__le32		parm4;
2176 	__le32		parm5;
2177 	__le32		count;	/* sizeof(((struct aac_get_config_status_resp *)NULL)->data) */
2178 };
2179 
2180 #define CFACT_CONTINUE 0
2181 #define CFACT_PAUSE    1
2182 #define CFACT_ABORT    2
2183 struct aac_get_config_status_resp {
2184 	__le32		response; /* ST_OK */
2185 	__le32		dummy0;
2186 	__le32		status;	/* CT_OK */
2187 	__le32		parm1;
2188 	__le32		parm2;
2189 	__le32		parm3;
2190 	__le32		parm4;
2191 	__le32		parm5;
2192 	struct {
2193 		__le32	action; /* CFACT_CONTINUE, CFACT_PAUSE or CFACT_ABORT */
2194 		__le16	flags;
2195 		__le16	count;
2196 	}		data;
2197 };
2198 
2199 /*
2200  *	Accept the configuration as-is
2201  */
2202 
2203 #define CT_COMMIT_CONFIG 152
2204 
2205 struct aac_commit_config {
2206 	__le32		command;	/* VM_ContainerConfig */
2207 	__le32		type;		/* CT_COMMIT_CONFIG */
2208 };
2209 
2210 /*
2211  *	Query for Container Configuration Status
2212  */
2213 
2214 #define CT_GET_CONTAINER_COUNT 4
2215 struct aac_get_container_count {
2216 	__le32		command;	/* VM_ContainerConfig */
2217 	__le32		type;		/* CT_GET_CONTAINER_COUNT */
2218 };
2219 
2220 struct aac_get_container_count_resp {
2221 	__le32		response; /* ST_OK */
2222 	__le32		dummy0;
2223 	__le32		MaxContainers;
2224 	__le32		ContainerSwitchEntries;
2225 	__le32		MaxPartitions;
2226 	__le32		MaxSimpleVolumes;
2227 };
2228 
2229 
2230 /*
2231  *	Query for "mountable" objects, ie, objects that are typically
2232  *	associated with a drive letter on the client (host) side.
2233  */
2234 
2235 struct aac_mntent {
2236 	__le32			oid;
2237 	u8			name[16];	/* if applicable */
2238 	struct creation_info	create_info;	/* if applicable */
2239 	__le32			capacity;
2240 	__le32			vol;		/* substrate structure */
2241 	__le32			obj;		/* FT_FILESYS, etc. */
2242 	__le32			state;		/* unready for mounting,
2243 						   readonly, etc. */
2244 	union aac_contentinfo	fileinfo;	/* Info specific to content
2245 						   manager (eg, filesystem) */
2246 	__le32			altoid;		/* != oid <==> snapshot or
2247 						   broken mirror exists */
2248 	__le32			capacityhigh;
2249 };
2250 
2251 #define FSCS_NOTCLEAN	0x0001  /* fsck is necessary before mounting */
2252 #define FSCS_READONLY	0x0002	/* possible result of broken mirror */
2253 #define FSCS_HIDDEN	0x0004	/* should be ignored - set during a clear */
2254 #define FSCS_NOT_READY	0x0008	/* Array spinning up to fulfil request */
2255 
2256 struct aac_query_mount {
2257 	__le32		command;
2258 	__le32		type;
2259 	__le32		count;
2260 };
2261 
2262 struct aac_mount {
2263 	__le32		status;
2264 	__le32		type;           /* should be same as that requested */
2265 	__le32		count;
2266 	struct aac_mntent mnt[1];
2267 };
2268 
2269 #define CT_READ_NAME 130
2270 struct aac_get_name {
2271 	__le32		command;	/* VM_ContainerConfig */
2272 	__le32		type;		/* CT_READ_NAME */
2273 	__le32		cid;
2274 	__le32		parm1;
2275 	__le32		parm2;
2276 	__le32		parm3;
2277 	__le32		parm4;
2278 	__le32		count;	/* sizeof(((struct aac_get_name_resp *)NULL)->data) */
2279 };
2280 
2281 struct aac_get_name_resp {
2282 	__le32		dummy0;
2283 	__le32		dummy1;
2284 	__le32		status;	/* CT_OK */
2285 	__le32		parm1;
2286 	__le32		parm2;
2287 	__le32		parm3;
2288 	__le32		parm4;
2289 	__le32		parm5;
2290 	u8		data[17];
2291 };
2292 
2293 #define CT_CID_TO_32BITS_UID 165
2294 struct aac_get_serial {
2295 	__le32		command;	/* VM_ContainerConfig */
2296 	__le32		type;		/* CT_CID_TO_32BITS_UID */
2297 	__le32		cid;
2298 };
2299 
2300 struct aac_get_serial_resp {
2301 	__le32		dummy0;
2302 	__le32		dummy1;
2303 	__le32		status;	/* CT_OK */
2304 	__le32		uid;
2305 };
2306 
2307 /*
2308  * The following command is sent to shut down each container.
2309  */
2310 
2311 struct aac_close {
2312 	__le32	command;
2313 	__le32	cid;
2314 };
2315 
2316 struct aac_query_disk
2317 {
2318 	s32	cnum;
2319 	s32	bus;
2320 	s32	id;
2321 	s32	lun;
2322 	u32	valid;
2323 	u32	locked;
2324 	u32	deleted;
2325 	s32	instance;
2326 	s8	name[10];
2327 	u32	unmapped;
2328 };
2329 
2330 struct aac_delete_disk {
2331 	u32	disknum;
2332 	u32	cnum;
2333 };
2334 
2335 struct fib_ioctl
2336 {
2337 	u32	fibctx;
2338 	s32	wait;
2339 	char	__user *fib;
2340 };
2341 
2342 struct revision
2343 {
2344 	u32 compat;
2345 	__le32 version;
2346 	__le32 build;
2347 };
2348 
2349 
2350 /*
2351  *	Ugly - non Linux like ioctl coding for back compat.
2352  */
2353 
2354 #define CTL_CODE(function, method) (                 \
2355     (4<< 16) | ((function) << 2) | (method) \
2356 )
2357 
2358 /*
2359  *	Define the method codes for how buffers are passed for I/O and FS
2360  *	controls
2361  */
2362 
2363 #define METHOD_BUFFERED                 0
2364 #define METHOD_NEITHER                  3
2365 
2366 /*
2367  *	Filesystem ioctls
2368  */
2369 
2370 #define FSACTL_SENDFIB				CTL_CODE(2050, METHOD_BUFFERED)
2371 #define FSACTL_SEND_RAW_SRB			CTL_CODE(2067, METHOD_BUFFERED)
2372 #define FSACTL_DELETE_DISK			0x163
2373 #define FSACTL_QUERY_DISK			0x173
2374 #define FSACTL_OPEN_GET_ADAPTER_FIB		CTL_CODE(2100, METHOD_BUFFERED)
2375 #define FSACTL_GET_NEXT_ADAPTER_FIB		CTL_CODE(2101, METHOD_BUFFERED)
2376 #define FSACTL_CLOSE_GET_ADAPTER_FIB		CTL_CODE(2102, METHOD_BUFFERED)
2377 #define FSACTL_MINIPORT_REV_CHECK               CTL_CODE(2107, METHOD_BUFFERED)
2378 #define FSACTL_GET_PCI_INFO			CTL_CODE(2119, METHOD_BUFFERED)
2379 #define FSACTL_FORCE_DELETE_DISK		CTL_CODE(2120, METHOD_NEITHER)
2380 #define FSACTL_GET_CONTAINERS			2131
2381 #define FSACTL_SEND_LARGE_FIB			CTL_CODE(2138, METHOD_BUFFERED)
2382 #define FSACTL_RESET_IOP			CTL_CODE(2140, METHOD_BUFFERED)
2383 #define FSACTL_GET_HBA_INFO			CTL_CODE(2150, METHOD_BUFFERED)
2384 /* flags defined for IOP & HW SOFT RESET */
2385 #define HW_IOP_RESET				0x01
2386 #define HW_SOFT_RESET				0x02
2387 #define IOP_HWSOFT_RESET			(HW_IOP_RESET | HW_SOFT_RESET)
2388 /* HW Soft Reset register offset */
2389 #define IBW_SWR_OFFSET				0x4000
2390 #define SOFT_RESET_TIME			60
2391 
2392 
2393 
2394 struct aac_common
2395 {
2396 	/*
2397 	 *	If this value is set to 1 then interrupt moderation will occur
2398 	 *	in the base commuication support.
2399 	 */
2400 	u32 irq_mod;
2401 	u32 peak_fibs;
2402 	u32 zero_fibs;
2403 	u32 fib_timeouts;
2404 	/*
2405 	 *	Statistical counters in debug mode
2406 	 */
2407 #ifdef DBG
2408 	u32 FibsSent;
2409 	u32 FibRecved;
2410 	u32 NativeSent;
2411 	u32 NativeRecved;
2412 	u32 NoResponseSent;
2413 	u32 NoResponseRecved;
2414 	u32 AsyncSent;
2415 	u32 AsyncRecved;
2416 	u32 NormalSent;
2417 	u32 NormalRecved;
2418 #endif
2419 };
2420 
2421 extern struct aac_common aac_config;
2422 
2423 /*
2424  * This is for management ioctl purpose only.
2425  */
2426 struct aac_hba_info {
2427 
2428 	u8	driver_name[50];
2429 	u8	adapter_number;
2430 	u8	system_io_bus_number;
2431 	u8	device_number;
2432 	u32	function_number;
2433 	u32	vendor_id;
2434 	u32	device_id;
2435 	u32	sub_vendor_id;
2436 	u32	sub_system_id;
2437 	u32	mapped_base_address_size;
2438 	u32	base_physical_address_high_part;
2439 	u32	base_physical_address_low_part;
2440 
2441 	u32	max_command_size;
2442 	u32	max_fib_size;
2443 	u32	max_scatter_gather_from_os;
2444 	u32	max_scatter_gather_to_fw;
2445 	u32	max_outstanding_fibs;
2446 
2447 	u32	queue_start_threshold;
2448 	u32	queue_dump_threshold;
2449 	u32	max_io_size_queued;
2450 	u32	outstanding_io;
2451 
2452 	u32	firmware_build_number;
2453 	u32	bios_build_number;
2454 	u32	driver_build_number;
2455 	u32	serial_number_high_part;
2456 	u32	serial_number_low_part;
2457 	u32	supported_options;
2458 	u32	feature_bits;
2459 	u32	currentnumber_ports;
2460 
2461 	u8	new_comm_interface:1;
2462 	u8	new_commands_supported:1;
2463 	u8	disable_passthrough:1;
2464 	u8	expose_non_dasd:1;
2465 	u8	queue_allowed:1;
2466 	u8	bled_check_enabled:1;
2467 	u8	reserved1:1;
2468 	u8	reserted2:1;
2469 
2470 	u32	reserved3[10];
2471 
2472 };
2473 
2474 /*
2475  *	The following macro is used when sending and receiving FIBs. It is
2476  *	only used for debugging.
2477  */
2478 
2479 #ifdef DBG
2480 #define	FIB_COUNTER_INCREMENT(counter)		(counter)++
2481 #else
2482 #define	FIB_COUNTER_INCREMENT(counter)
2483 #endif
2484 
2485 /*
2486  *	Adapter direct commands
2487  *	Monitor/Kernel API
2488  */
2489 
2490 #define	BREAKPOINT_REQUEST		0x00000004
2491 #define	INIT_STRUCT_BASE_ADDRESS	0x00000005
2492 #define READ_PERMANENT_PARAMETERS	0x0000000a
2493 #define WRITE_PERMANENT_PARAMETERS	0x0000000b
2494 #define HOST_CRASHING			0x0000000d
2495 #define	SEND_SYNCHRONOUS_FIB		0x0000000c
2496 #define COMMAND_POST_RESULTS		0x00000014
2497 #define GET_ADAPTER_PROPERTIES		0x00000019
2498 #define GET_DRIVER_BUFFER_PROPERTIES	0x00000023
2499 #define RCV_TEMP_READINGS		0x00000025
2500 #define GET_COMM_PREFERRED_SETTINGS	0x00000026
2501 #define IOP_RESET_FW_FIB_DUMP		0x00000034
2502 #define DROP_IO			0x00000035
2503 #define IOP_RESET			0x00001000
2504 #define IOP_RESET_ALWAYS		0x00001001
2505 #define RE_INIT_ADAPTER		0x000000ee
2506 
2507 #define IOP_SRC_RESET_MASK		0x00000100
2508 
2509 /*
2510  *	Adapter Status Register
2511  *
2512  *  Phase Staus mailbox is 32bits:
2513  *	<31:16> = Phase Status
2514  *	<15:0>  = Phase
2515  *
2516  *	The adapter reports is present state through the phase.  Only
2517  *	a single phase should be ever be set.  Each phase can have multiple
2518  *	phase status bits to provide more detailed information about the
2519  *	state of the board.  Care should be taken to ensure that any phase
2520  *	status bits that are set when changing the phase are also valid
2521  *	for the new phase or be cleared out.  Adapter software (monitor,
2522  *	iflash, kernel) is responsible for properly maintining the phase
2523  *	status mailbox when it is running.
2524  *
2525  *	MONKER_API Phases
2526  *
2527  *	Phases are bit oriented.  It is NOT valid  to have multiple bits set
2528  */
2529 
2530 #define	SELF_TEST_FAILED		0x00000004
2531 #define	MONITOR_PANIC			0x00000020
2532 #define	KERNEL_BOOTING			0x00000040
2533 #define	KERNEL_UP_AND_RUNNING		0x00000080
2534 #define	KERNEL_PANIC			0x00000100
2535 #define	FLASH_UPD_PENDING		0x00002000
2536 #define	FLASH_UPD_SUCCESS		0x00004000
2537 #define	FLASH_UPD_FAILED		0x00008000
2538 #define	INVALID_OMR			0xffffffff
2539 #define	FWUPD_TIMEOUT			(5 * 60)
2540 
2541 /*
2542  *	Doorbell bit defines
2543  */
2544 
2545 #define DoorBellSyncCmdAvailable	(1<<0)	/* Host -> Adapter */
2546 #define DoorBellPrintfDone		(1<<5)	/* Host -> Adapter */
2547 #define DoorBellAdapterNormCmdReady	(1<<1)	/* Adapter -> Host */
2548 #define DoorBellAdapterNormRespReady	(1<<2)	/* Adapter -> Host */
2549 #define DoorBellAdapterNormCmdNotFull	(1<<3)	/* Adapter -> Host */
2550 #define DoorBellAdapterNormRespNotFull	(1<<4)	/* Adapter -> Host */
2551 #define DoorBellPrintfReady		(1<<5)	/* Adapter -> Host */
2552 #define DoorBellAifPending		(1<<6)	/* Adapter -> Host */
2553 
2554 /* PMC specific outbound doorbell bits */
2555 #define PmDoorBellResponseSent		(1<<1)	/* Adapter -> Host */
2556 
2557 /*
2558  *	For FIB communication, we need all of the following things
2559  *	to send back to the user.
2560  */
2561 
2562 #define		AifCmdEventNotify	1	/* Notify of event */
2563 #define			AifEnConfigChange	3	/* Adapter configuration change */
2564 #define			AifEnContainerChange	4	/* Container configuration change */
2565 #define			AifEnDeviceFailure	5	/* SCSI device failed */
2566 #define			AifEnEnclosureManagement 13	/* EM_DRIVE_* */
2567 #define				EM_DRIVE_INSERTION	31
2568 #define				EM_DRIVE_REMOVAL	32
2569 #define			EM_SES_DRIVE_INSERTION	33
2570 #define			EM_SES_DRIVE_REMOVAL	26
2571 #define			AifEnBatteryEvent	14	/* Change in Battery State */
2572 #define			AifEnAddContainer	15	/* A new array was created */
2573 #define			AifEnDeleteContainer	16	/* A container was deleted */
2574 #define			AifEnExpEvent		23	/* Firmware Event Log */
2575 #define			AifExeFirmwarePanic	3	/* Firmware Event Panic */
2576 #define			AifHighPriority		3	/* Highest Priority Event */
2577 #define			AifEnAddJBOD		30	/* JBOD created */
2578 #define			AifEnDeleteJBOD		31	/* JBOD deleted */
2579 
2580 #define			AifBuManagerEvent		42 /* Bu management*/
2581 #define			AifBuCacheDataLoss		10
2582 #define			AifBuCacheDataRecover	11
2583 
2584 #define		AifCmdJobProgress	2	/* Progress report */
2585 #define			AifJobCtrZero	101	/* Array Zero progress */
2586 #define			AifJobStsSuccess 1	/* Job completes */
2587 #define			AifJobStsRunning 102	/* Job running */
2588 #define		AifCmdAPIReport		3	/* Report from other user of API */
2589 #define		AifCmdDriverNotify	4	/* Notify host driver of event */
2590 #define			AifDenMorphComplete 200	/* A morph operation completed */
2591 #define			AifDenVolumeExtendComplete 201 /* A volume extend completed */
2592 #define		AifReqJobList		100	/* Gets back complete job list */
2593 #define		AifReqJobsForCtr	101	/* Gets back jobs for specific container */
2594 #define		AifReqJobsForScsi	102	/* Gets back jobs for specific SCSI device */
2595 #define		AifReqJobReport		103	/* Gets back a specific job report or list of them */
2596 #define		AifReqTerminateJob	104	/* Terminates job */
2597 #define		AifReqSuspendJob	105	/* Suspends a job */
2598 #define		AifReqResumeJob		106	/* Resumes a job */
2599 #define		AifReqSendAPIReport	107	/* API generic report requests */
2600 #define		AifReqAPIJobStart	108	/* Start a job from the API */
2601 #define		AifReqAPIJobUpdate	109	/* Update a job report from the API */
2602 #define		AifReqAPIJobFinish	110	/* Finish a job from the API */
2603 
2604 /* PMC NEW COMM: Request the event data */
2605 #define		AifReqEvent		200
2606 #define		AifRawDeviceRemove	203	/* RAW device deleted */
2607 #define		AifNativeDeviceAdd	204	/* native HBA device added */
2608 #define		AifNativeDeviceRemove	205	/* native HBA device removed */
2609 
2610 
2611 /*
2612  *	Adapter Initiated FIB command structures. Start with the adapter
2613  *	initiated FIBs that really come from the adapter, and get responded
2614  *	to by the host.
2615  */
2616 
2617 struct aac_aifcmd {
2618 	__le32 command;		/* Tell host what type of notify this is */
2619 	__le32 seqnum;		/* To allow ordering of reports (if necessary) */
2620 	u8 data[];		/* Undefined length (from kernel viewpoint) */
2621 };
2622 
2623 /**
2624  *	Convert capacity to cylinders
2625  *	accounting for the fact capacity could be a 64 bit value
2626  *
2627  */
2628 static inline unsigned int cap_to_cyls(sector_t capacity, unsigned divisor)
2629 {
2630 	sector_div(capacity, divisor);
2631 	return capacity;
2632 }
2633 
2634 static inline int aac_pci_offline(struct aac_dev *dev)
2635 {
2636 	return pci_channel_offline(dev->pdev) || dev->handle_pci_error;
2637 }
2638 
2639 static inline int aac_adapter_check_health(struct aac_dev *dev)
2640 {
2641 	if (unlikely(aac_pci_offline(dev)))
2642 		return -1;
2643 
2644 	return (dev)->a_ops.adapter_check_health(dev);
2645 }
2646 
2647 
2648 int aac_scan_host(struct aac_dev *dev);
2649 
2650 static inline void aac_schedule_safw_scan_worker(struct aac_dev *dev)
2651 {
2652 	schedule_delayed_work(&dev->safw_rescan_work, AAC_RESCAN_DELAY);
2653 }
2654 
2655 static inline void aac_schedule_src_reinit_aif_worker(struct aac_dev *dev)
2656 {
2657 	schedule_delayed_work(&dev->src_reinit_aif_worker, AAC_RESCAN_DELAY);
2658 }
2659 
2660 static inline void aac_safw_rescan_worker(struct work_struct *work)
2661 {
2662 	struct aac_dev *dev = container_of(to_delayed_work(work),
2663 		struct aac_dev, safw_rescan_work);
2664 
2665 	wait_event(dev->scsi_host_ptr->host_wait,
2666 		!scsi_host_in_recovery(dev->scsi_host_ptr));
2667 
2668 	aac_scan_host(dev);
2669 }
2670 
2671 static inline void aac_cancel_rescan_worker(struct aac_dev *dev)
2672 {
2673 	cancel_delayed_work_sync(&dev->safw_rescan_work);
2674 	cancel_delayed_work_sync(&dev->src_reinit_aif_worker);
2675 }
2676 
2677 enum aac_cmd_owner {
2678 	AAC_OWNER_MIDLEVEL	= 0x101,
2679 	AAC_OWNER_LOWLEVEL	= 0x102,
2680 	AAC_OWNER_ERROR_HANDLER	= 0x103,
2681 	AAC_OWNER_FIRMWARE	= 0x106,
2682 };
2683 
2684 struct aac_cmd_priv {
2685 	int			(*callback)(struct scsi_cmnd *);
2686 	int			status;
2687 	enum aac_cmd_owner	owner;
2688 	bool			sent_command;
2689 };
2690 
2691 static inline struct aac_cmd_priv *aac_priv(struct scsi_cmnd *cmd)
2692 {
2693 	return scsi_cmd_priv(cmd);
2694 }
2695 
2696 void aac_safw_rescan_worker(struct work_struct *work);
2697 void aac_src_reinit_aif_worker(struct work_struct *work);
2698 int aac_acquire_irq(struct aac_dev *dev);
2699 void aac_free_irq(struct aac_dev *dev);
2700 int aac_setup_safw_adapter(struct aac_dev *dev);
2701 const char *aac_driverinfo(struct Scsi_Host *);
2702 void aac_fib_vector_assign(struct aac_dev *dev);
2703 struct fib *aac_fib_alloc(struct aac_dev *dev);
2704 struct fib *aac_fib_alloc_tag(struct aac_dev *dev, struct scsi_cmnd *scmd);
2705 int aac_fib_setup(struct aac_dev *dev);
2706 void aac_fib_map_free(struct aac_dev *dev);
2707 void aac_fib_free(struct fib * context);
2708 void aac_fib_init(struct fib * context);
2709 void aac_printf(struct aac_dev *dev, u32 val);
2710 int aac_fib_send(u16 command, struct fib * context, unsigned long size, int priority, int wait, int reply, fib_callback callback, void *ctxt);
2711 int aac_hba_send(u8 command, struct fib *context,
2712 		fib_callback callback, void *ctxt);
2713 int aac_consumer_get(struct aac_dev * dev, struct aac_queue * q, struct aac_entry **entry);
2714 void aac_consumer_free(struct aac_dev * dev, struct aac_queue * q, u32 qnum);
2715 int aac_fib_complete(struct fib * context);
2716 void aac_hba_callback(void *context, struct fib *fibptr);
2717 #define fib_data(fibctx) ((void *)(fibctx)->hw_fib_va->data)
2718 struct aac_dev *aac_init_adapter(struct aac_dev *dev);
2719 void aac_src_access_devreg(struct aac_dev *dev, int mode);
2720 void aac_set_intx_mode(struct aac_dev *dev);
2721 int aac_get_config_status(struct aac_dev *dev, int commit_flag);
2722 int aac_get_containers(struct aac_dev *dev);
2723 int aac_scsi_cmd(struct scsi_cmnd *cmd);
2724 int aac_dev_ioctl(struct aac_dev *dev, unsigned int cmd, void __user *arg);
2725 #ifndef shost_to_class
2726 #define shost_to_class(shost) &shost->shost_dev
2727 #endif
2728 ssize_t aac_get_serial_number(struct device *dev, char *buf);
2729 int aac_do_ioctl(struct aac_dev *dev, unsigned int cmd, void __user *arg);
2730 int aac_rx_init(struct aac_dev *dev);
2731 int aac_rkt_init(struct aac_dev *dev);
2732 int aac_nark_init(struct aac_dev *dev);
2733 int aac_sa_init(struct aac_dev *dev);
2734 int aac_src_init(struct aac_dev *dev);
2735 int aac_srcv_init(struct aac_dev *dev);
2736 int aac_queue_get(struct aac_dev * dev, u32 * index, u32 qid, struct hw_fib * hw_fib, int wait, struct fib * fibptr, unsigned long *nonotify);
2737 void aac_define_int_mode(struct aac_dev *dev);
2738 unsigned int aac_response_normal(struct aac_queue * q);
2739 unsigned int aac_command_normal(struct aac_queue * q);
2740 unsigned int aac_intr_normal(struct aac_dev *dev, u32 Index,
2741 			int isAif, int isFastResponse,
2742 			struct hw_fib *aif_fib);
2743 int aac_reset_adapter(struct aac_dev *dev, int forced, u8 reset_type);
2744 int aac_check_health(struct aac_dev * dev);
2745 int aac_command_thread(void *data);
2746 int aac_close_fib_context(struct aac_dev * dev, struct aac_fib_context *fibctx);
2747 int aac_fib_adapter_complete(struct fib * fibptr, unsigned short size);
2748 struct aac_driver_ident* aac_get_driver_ident(int devtype);
2749 int aac_get_adapter_info(struct aac_dev* dev);
2750 int aac_send_shutdown(struct aac_dev *dev);
2751 int aac_probe_container(struct aac_dev *dev, int cid);
2752 int _aac_rx_init(struct aac_dev *dev);
2753 int aac_rx_select_comm(struct aac_dev *dev, int comm);
2754 int aac_rx_deliver_producer(struct fib * fib);
2755 void aac_reinit_aif(struct aac_dev *aac, unsigned int index);
2756 
2757 static inline int aac_is_src(struct aac_dev *dev)
2758 {
2759 	u16 device = dev->pdev->device;
2760 
2761 	if (device == PMC_DEVICE_S6 ||
2762 		device == PMC_DEVICE_S7 ||
2763 		device == PMC_DEVICE_S8)
2764 		return 1;
2765 	return 0;
2766 }
2767 
2768 static inline int aac_supports_2T(struct aac_dev *dev)
2769 {
2770 	return (dev->adapter_info.options & AAC_OPT_NEW_COMM_64);
2771 }
2772 
2773 char * get_container_type(unsigned type);
2774 extern int numacb;
2775 extern char aac_driver_version[];
2776 extern int startup_timeout;
2777 extern int aif_timeout;
2778 extern int expose_physicals;
2779 extern int aac_reset_devices;
2780 extern int aac_msi;
2781 extern int aac_commit;
2782 extern int update_interval;
2783 extern int check_interval;
2784 extern int aac_check_reset;
2785 extern int aac_fib_dump;
2786 #endif
2787