1 /* 2 * Adaptec AAC series RAID controller driver 3 * (c) Copyright 2001 Red Hat Inc. <alan@redhat.com> 4 * 5 * based on the old aacraid driver that is.. 6 * Adaptec aacraid device driver for Linux. 7 * 8 * Copyright (c) 2000-2010 Adaptec, Inc. 9 * 2010-2015 PMC-Sierra, Inc. (aacraid@pmc-sierra.com) 10 * 2016-2017 Microsemi Corp. (aacraid@microsemi.com) 11 * 12 * This program is free software; you can redistribute it and/or modify 13 * it under the terms of the GNU General Public License as published by 14 * the Free Software Foundation; either version 2, or (at your option) 15 * any later version. 16 * 17 * This program is distributed in the hope that it will be useful, 18 * but WITHOUT ANY WARRANTY; without even the implied warranty of 19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 * GNU General Public License for more details. 21 * 22 * You should have received a copy of the GNU General Public License 23 * along with this program; see the file COPYING. If not, write to 24 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. 25 * 26 * Module Name: 27 * aacraid.h 28 * 29 * Abstract: Contains all routines for control of the aacraid driver 30 * 31 */ 32 33 #ifndef _AACRAID_H_ 34 #define _AACRAID_H_ 35 #ifndef dprintk 36 # define dprintk(x) 37 #endif 38 /* eg: if (nblank(dprintk(x))) */ 39 #define _nblank(x) #x 40 #define nblank(x) _nblank(x)[0] 41 42 #include <linux/interrupt.h> 43 #include <linux/pci.h> 44 #include <scsi/scsi_host.h> 45 46 /*------------------------------------------------------------------------------ 47 * D E F I N E S 48 *----------------------------------------------------------------------------*/ 49 50 #define AAC_MAX_MSIX 32 /* vectors */ 51 #define AAC_PCI_MSI_ENABLE 0x8000 52 53 enum { 54 AAC_ENABLE_INTERRUPT = 0x0, 55 AAC_DISABLE_INTERRUPT, 56 AAC_ENABLE_MSIX, 57 AAC_DISABLE_MSIX, 58 AAC_CLEAR_AIF_BIT, 59 AAC_CLEAR_SYNC_BIT, 60 AAC_ENABLE_INTX 61 }; 62 63 #define AAC_INT_MODE_INTX (1<<0) 64 #define AAC_INT_MODE_MSI (1<<1) 65 #define AAC_INT_MODE_AIF (1<<2) 66 #define AAC_INT_MODE_SYNC (1<<3) 67 #define AAC_INT_MODE_MSIX (1<<16) 68 69 #define AAC_INT_ENABLE_TYPE1_INTX 0xfffffffb 70 #define AAC_INT_ENABLE_TYPE1_MSIX 0xfffffffa 71 #define AAC_INT_DISABLE_ALL 0xffffffff 72 73 /* Bit definitions in IOA->Host Interrupt Register */ 74 #define PMC_TRANSITION_TO_OPERATIONAL (1<<31) 75 #define PMC_IOARCB_TRANSFER_FAILED (1<<28) 76 #define PMC_IOA_UNIT_CHECK (1<<27) 77 #define PMC_NO_HOST_RRQ_FOR_CMD_RESPONSE (1<<26) 78 #define PMC_CRITICAL_IOA_OP_IN_PROGRESS (1<<25) 79 #define PMC_IOARRIN_LOST (1<<4) 80 #define PMC_SYSTEM_BUS_MMIO_ERROR (1<<3) 81 #define PMC_IOA_PROCESSOR_IN_ERROR_STATE (1<<2) 82 #define PMC_HOST_RRQ_VALID (1<<1) 83 #define PMC_OPERATIONAL_STATUS (1<<31) 84 #define PMC_ALLOW_MSIX_VECTOR0 (1<<0) 85 86 #define PMC_IOA_ERROR_INTERRUPTS (PMC_IOARCB_TRANSFER_FAILED | \ 87 PMC_IOA_UNIT_CHECK | \ 88 PMC_NO_HOST_RRQ_FOR_CMD_RESPONSE | \ 89 PMC_IOARRIN_LOST | \ 90 PMC_SYSTEM_BUS_MMIO_ERROR | \ 91 PMC_IOA_PROCESSOR_IN_ERROR_STATE) 92 93 #define PMC_ALL_INTERRUPT_BITS (PMC_IOA_ERROR_INTERRUPTS | \ 94 PMC_HOST_RRQ_VALID | \ 95 PMC_TRANSITION_TO_OPERATIONAL | \ 96 PMC_ALLOW_MSIX_VECTOR0) 97 #define PMC_GLOBAL_INT_BIT2 0x00000004 98 #define PMC_GLOBAL_INT_BIT0 0x00000001 99 100 #ifndef AAC_DRIVER_BUILD 101 # define AAC_DRIVER_BUILD 50834 102 # define AAC_DRIVER_BRANCH "-custom" 103 #endif 104 #define MAXIMUM_NUM_CONTAINERS 32 105 106 #define AAC_NUM_MGT_FIB 8 107 #define AAC_NUM_IO_FIB (1024 - AAC_NUM_MGT_FIB) 108 #define AAC_NUM_FIB (AAC_NUM_IO_FIB + AAC_NUM_MGT_FIB) 109 110 #define AAC_MAX_LUN 256 111 112 #define AAC_MAX_HOSTPHYSMEMPAGES (0xfffff) 113 #define AAC_MAX_32BIT_SGBCOUNT ((unsigned short)256) 114 115 #define AAC_DEBUG_INSTRUMENT_AIF_DELETE 116 117 #define AAC_MAX_NATIVE_TARGETS 1024 118 /* Thor: 5 phys. buses: #0: empty, 1-4: 256 targets each */ 119 #define AAC_MAX_BUSES 5 120 #define AAC_MAX_TARGETS 256 121 #define AAC_BUS_TARGET_LOOP (AAC_MAX_BUSES * AAC_MAX_TARGETS) 122 #define AAC_MAX_NATIVE_SIZE 2048 123 #define FW_ERROR_BUFFER_SIZE 512 124 125 #define get_bus_number(x) (x/AAC_MAX_TARGETS) 126 #define get_target_number(x) (x%AAC_MAX_TARGETS) 127 128 /* Thor AIF events */ 129 #define SA_AIF_HOTPLUG (1<<1) 130 #define SA_AIF_HARDWARE (1<<2) 131 #define SA_AIF_PDEV_CHANGE (1<<4) 132 #define SA_AIF_LDEV_CHANGE (1<<5) 133 #define SA_AIF_BPSTAT_CHANGE (1<<30) 134 #define SA_AIF_BPCFG_CHANGE (1<<31) 135 136 #define HBA_MAX_SG_EMBEDDED 28 137 #define HBA_MAX_SG_SEPARATE 90 138 #define HBA_SENSE_DATA_LEN_MAX 32 139 #define HBA_REQUEST_TAG_ERROR_FLAG 0x00000002 140 #define HBA_SGL_FLAGS_EXT 0x80000000UL 141 142 struct aac_hba_sgl { 143 u32 addr_lo; /* Lower 32-bits of SGL element address */ 144 u32 addr_hi; /* Upper 32-bits of SGL element address */ 145 u32 len; /* Length of SGL element in bytes */ 146 u32 flags; /* SGL element flags */ 147 }; 148 149 enum { 150 HBA_IU_TYPE_SCSI_CMD_REQ = 0x40, 151 HBA_IU_TYPE_SCSI_TM_REQ = 0x41, 152 HBA_IU_TYPE_SATA_REQ = 0x42, 153 HBA_IU_TYPE_RESP = 0x60, 154 HBA_IU_TYPE_COALESCED_RESP = 0x61, 155 HBA_IU_TYPE_INT_COALESCING_CFG_REQ = 0x70 156 }; 157 158 enum { 159 HBA_CMD_BYTE1_DATA_DIR_IN = 0x1, 160 HBA_CMD_BYTE1_DATA_DIR_OUT = 0x2, 161 HBA_CMD_BYTE1_DATA_TYPE_DDR = 0x4, 162 HBA_CMD_BYTE1_CRYPTO_ENABLE = 0x8 163 }; 164 165 enum { 166 HBA_CMD_BYTE1_BITOFF_DATA_DIR_IN = 0x0, 167 HBA_CMD_BYTE1_BITOFF_DATA_DIR_OUT, 168 HBA_CMD_BYTE1_BITOFF_DATA_TYPE_DDR, 169 HBA_CMD_BYTE1_BITOFF_CRYPTO_ENABLE 170 }; 171 172 enum { 173 HBA_RESP_DATAPRES_NO_DATA = 0x0, 174 HBA_RESP_DATAPRES_RESPONSE_DATA, 175 HBA_RESP_DATAPRES_SENSE_DATA 176 }; 177 178 enum { 179 HBA_RESP_SVCRES_TASK_COMPLETE = 0x0, 180 HBA_RESP_SVCRES_FAILURE, 181 HBA_RESP_SVCRES_TMF_COMPLETE, 182 HBA_RESP_SVCRES_TMF_SUCCEEDED, 183 HBA_RESP_SVCRES_TMF_REJECTED, 184 HBA_RESP_SVCRES_TMF_LUN_INVALID 185 }; 186 187 enum { 188 HBA_RESP_STAT_IO_ERROR = 0x1, 189 HBA_RESP_STAT_IO_ABORTED, 190 HBA_RESP_STAT_NO_PATH_TO_DEVICE, 191 HBA_RESP_STAT_INVALID_DEVICE, 192 HBA_RESP_STAT_HBAMODE_DISABLED = 0xE, 193 HBA_RESP_STAT_UNDERRUN = 0x51, 194 HBA_RESP_STAT_OVERRUN = 0x75 195 }; 196 197 struct aac_hba_cmd_req { 198 u8 iu_type; /* HBA information unit type */ 199 /* 200 * byte1: 201 * [1:0] DIR - 0=No data, 0x1 = IN, 0x2 = OUT 202 * [2] TYPE - 0=PCI, 1=DDR 203 * [3] CRYPTO_ENABLE - 0=Crypto disabled, 1=Crypto enabled 204 */ 205 u8 byte1; 206 u8 reply_qid; /* Host reply queue to post response to */ 207 u8 reserved1; 208 __le32 it_nexus; /* Device handle for the request */ 209 __le32 request_id; /* Sender context */ 210 /* Lower 32-bits of tweak value for crypto enabled IOs */ 211 __le32 tweak_value_lo; 212 u8 cdb[16]; /* SCSI CDB of the command */ 213 u8 lun[8]; /* SCSI LUN of the command */ 214 215 /* Total data length in bytes to be read/written (if any) */ 216 __le32 data_length; 217 218 /* [2:0] Task Attribute, [6:3] Command Priority */ 219 u8 attr_prio; 220 221 /* Number of SGL elements embedded in the HBA req */ 222 u8 emb_data_desc_count; 223 224 __le16 dek_index; /* DEK index for crypto enabled IOs */ 225 226 /* Lower 32-bits of reserved error data target location on the host */ 227 __le32 error_ptr_lo; 228 229 /* Upper 32-bits of reserved error data target location on the host */ 230 __le32 error_ptr_hi; 231 232 /* Length of reserved error data area on the host in bytes */ 233 __le32 error_length; 234 235 /* Upper 32-bits of tweak value for crypto enabled IOs */ 236 __le32 tweak_value_hi; 237 238 struct aac_hba_sgl sge[HBA_MAX_SG_SEPARATE+2]; /* SG list space */ 239 240 /* 241 * structure must not exceed 242 * AAC_MAX_NATIVE_SIZE-FW_ERROR_BUFFER_SIZE 243 */ 244 }; 245 246 /* Task Management Functions (TMF) */ 247 #define HBA_TMF_ABORT_TASK 0x01 248 #define HBA_TMF_LUN_RESET 0x08 249 250 struct aac_hba_tm_req { 251 u8 iu_type; /* HBA information unit type */ 252 u8 reply_qid; /* Host reply queue to post response to */ 253 u8 tmf; /* Task management function */ 254 u8 reserved1; 255 256 __le32 it_nexus; /* Device handle for the command */ 257 258 u8 lun[8]; /* SCSI LUN */ 259 260 /* Used to hold sender context. */ 261 __le32 request_id; /* Sender context */ 262 __le32 reserved2; 263 264 /* Request identifier of managed task */ 265 __le32 managed_request_id; /* Sender context being managed */ 266 __le32 reserved3; 267 268 /* Lower 32-bits of reserved error data target location on the host */ 269 __le32 error_ptr_lo; 270 /* Upper 32-bits of reserved error data target location on the host */ 271 __le32 error_ptr_hi; 272 /* Length of reserved error data area on the host in bytes */ 273 __le32 error_length; 274 }; 275 276 struct aac_hba_reset_req { 277 u8 iu_type; /* HBA information unit type */ 278 /* 0 - reset specified device, 1 - reset all devices */ 279 u8 reset_type; 280 u8 reply_qid; /* Host reply queue to post response to */ 281 u8 reserved1; 282 283 __le32 it_nexus; /* Device handle for the command */ 284 __le32 request_id; /* Sender context */ 285 /* Lower 32-bits of reserved error data target location on the host */ 286 __le32 error_ptr_lo; 287 /* Upper 32-bits of reserved error data target location on the host */ 288 __le32 error_ptr_hi; 289 /* Length of reserved error data area on the host in bytes */ 290 __le32 error_length; 291 }; 292 293 struct aac_hba_resp { 294 u8 iu_type; /* HBA information unit type */ 295 u8 reserved1[3]; 296 __le32 request_identifier; /* sender context */ 297 __le32 reserved2; 298 u8 service_response; /* SCSI service response */ 299 u8 status; /* SCSI status */ 300 u8 datapres; /* [1:0] - data present, [7:2] - reserved */ 301 u8 sense_response_data_len; /* Sense/response data length */ 302 __le32 residual_count; /* Residual data length in bytes */ 303 /* Sense/response data */ 304 u8 sense_response_buf[HBA_SENSE_DATA_LEN_MAX]; 305 }; 306 307 struct aac_native_hba { 308 union { 309 struct aac_hba_cmd_req cmd; 310 struct aac_hba_tm_req tmr; 311 u8 cmd_bytes[AAC_MAX_NATIVE_SIZE-FW_ERROR_BUFFER_SIZE]; 312 } cmd; 313 union { 314 struct aac_hba_resp err; 315 u8 resp_bytes[FW_ERROR_BUFFER_SIZE]; 316 } resp; 317 }; 318 319 #define CISS_REPORT_PHYSICAL_LUNS 0xc3 320 #define WRITE_HOST_WELLNESS 0xa5 321 #define CISS_IDENTIFY_PHYSICAL_DEVICE 0x15 322 #define BMIC_IN 0x26 323 #define BMIC_OUT 0x27 324 325 struct aac_ciss_phys_luns_resp { 326 u8 list_length[4]; /* LUN list length (N-7, big endian) */ 327 u8 resp_flag; /* extended response_flag */ 328 u8 reserved[3]; 329 struct _ciss_lun { 330 u8 tid[3]; /* Target ID */ 331 u8 bus; /* Bus, flag (bits 6,7) */ 332 u8 level3[2]; 333 u8 level2[2]; 334 u8 node_ident[16]; /* phys. node identifier */ 335 } lun[1]; /* List of phys. devices */ 336 }; 337 338 /* 339 * Interrupts 340 */ 341 #define AAC_MAX_HRRQ 64 342 343 struct aac_ciss_identify_pd { 344 u8 scsi_bus; /* SCSI Bus number on controller */ 345 u8 scsi_id; /* SCSI ID on this bus */ 346 u16 block_size; /* sector size in bytes */ 347 u32 total_blocks; /* number for sectors on drive */ 348 u32 reserved_blocks; /* controller reserved (RIS) */ 349 u8 model[40]; /* Physical Drive Model */ 350 u8 serial_number[40]; /* Drive Serial Number */ 351 u8 firmware_revision[8]; /* drive firmware revision */ 352 u8 scsi_inquiry_bits; /* inquiry byte 7 bits */ 353 u8 compaq_drive_stamp; /* 0 means drive not stamped */ 354 u8 last_failure_reason; 355 356 u8 flags; 357 u8 more_flags; 358 u8 scsi_lun; /* SCSI LUN for phys drive */ 359 u8 yet_more_flags; 360 u8 even_more_flags; 361 u32 spi_speed_rules; /* SPI Speed :Ultra disable diagnose */ 362 u8 phys_connector[2]; /* connector number on controller */ 363 u8 phys_box_on_bus; /* phys enclosure this drive resides */ 364 u8 phys_bay_in_box; /* phys drv bay this drive resides */ 365 u32 rpm; /* Drive rotational speed in rpm */ 366 u8 device_type; /* type of drive */ 367 u8 sata_version; /* only valid when drive_type is SATA */ 368 u64 big_total_block_count; 369 u64 ris_starting_lba; 370 u32 ris_size; 371 u8 wwid[20]; 372 u8 controller_phy_map[32]; 373 u16 phy_count; 374 u8 phy_connected_dev_type[256]; 375 u8 phy_to_drive_bay_num[256]; 376 u16 phy_to_attached_dev_index[256]; 377 u8 box_index; 378 u8 spitfire_support; 379 u16 extra_physical_drive_flags; 380 u8 negotiated_link_rate[256]; 381 u8 phy_to_phy_map[256]; 382 u8 redundant_path_present_map; 383 u8 redundant_path_failure_map; 384 u8 active_path_number; 385 u16 alternate_paths_phys_connector[8]; 386 u8 alternate_paths_phys_box_on_port[8]; 387 u8 multi_lun_device_lun_count; 388 u8 minimum_good_fw_revision[8]; 389 u8 unique_inquiry_bytes[20]; 390 u8 current_temperature_degreesC; 391 u8 temperature_threshold_degreesC; 392 u8 max_temperature_degreesC; 393 u8 logical_blocks_per_phys_block_exp; /* phyblocksize = 512 * 2^exp */ 394 u16 current_queue_depth_limit; 395 u8 switch_name[10]; 396 u16 switch_port; 397 u8 alternate_paths_switch_name[40]; 398 u8 alternate_paths_switch_port[8]; 399 u16 power_on_hours; /* valid only if gas gauge supported */ 400 u16 percent_endurance_used; /* valid only if gas gauge supported. */ 401 u8 drive_authentication; 402 u8 smart_carrier_authentication; 403 u8 smart_carrier_app_fw_version; 404 u8 smart_carrier_bootloader_fw_version; 405 u8 SanitizeSecureEraseSupport; 406 u8 DriveKeyFlags; 407 u8 encryption_key_name[64]; 408 u32 misc_drive_flags; 409 u16 dek_index; 410 u16 drive_encryption_flags; 411 u8 sanitize_maximum_time[6]; 412 u8 connector_info_mode; 413 u8 connector_info_number[4]; 414 u8 long_connector_name[64]; 415 u8 device_unique_identifier[16]; 416 u8 padto_2K[17]; 417 } __packed; 418 419 /* 420 * These macros convert from physical channels to virtual channels 421 */ 422 #define CONTAINER_CHANNEL (0) 423 #define NATIVE_CHANNEL (1) 424 #define CONTAINER_TO_CHANNEL(cont) (CONTAINER_CHANNEL) 425 #define CONTAINER_TO_ID(cont) (cont) 426 #define CONTAINER_TO_LUN(cont) (0) 427 #define ENCLOSURE_CHANNEL (3) 428 429 #define PMC_DEVICE_S6 0x28b 430 #define PMC_DEVICE_S7 0x28c 431 #define PMC_DEVICE_S8 0x28d 432 433 #define aac_phys_to_logical(x) ((x)+1) 434 #define aac_logical_to_phys(x) ((x)?(x)-1:0) 435 436 /* 437 * These macros are for keeping track of 438 * character device state. 439 */ 440 #define AAC_CHARDEV_UNREGISTERED (-1) 441 #define AAC_CHARDEV_NEEDS_REINIT (-2) 442 443 /* #define AAC_DETAILED_STATUS_INFO */ 444 445 struct diskparm 446 { 447 int heads; 448 int sectors; 449 int cylinders; 450 }; 451 452 453 /* 454 * Firmware constants 455 */ 456 457 #define CT_NONE 0 458 #define CT_OK 218 459 #define FT_FILESYS 8 /* ADAPTEC's "FSA"(tm) filesystem */ 460 #define FT_DRIVE 9 /* physical disk - addressable in scsi by bus/id/lun */ 461 462 /* 463 * Host side memory scatter gather list 464 * Used by the adapter for read, write, and readdirplus operations 465 * We have separate 32 and 64 bit version because even 466 * on 64 bit systems not all cards support the 64 bit version 467 */ 468 struct sgentry { 469 __le32 addr; /* 32-bit address. */ 470 __le32 count; /* Length. */ 471 }; 472 473 struct user_sgentry { 474 u32 addr; /* 32-bit address. */ 475 u32 count; /* Length. */ 476 }; 477 478 struct sgentry64 { 479 __le32 addr[2]; /* 64-bit addr. 2 pieces for data alignment */ 480 __le32 count; /* Length. */ 481 }; 482 483 struct user_sgentry64 { 484 u32 addr[2]; /* 64-bit addr. 2 pieces for data alignment */ 485 u32 count; /* Length. */ 486 }; 487 488 struct sgentryraw { 489 __le32 next; /* reserved for F/W use */ 490 __le32 prev; /* reserved for F/W use */ 491 __le32 addr[2]; 492 __le32 count; 493 __le32 flags; /* reserved for F/W use */ 494 }; 495 496 struct user_sgentryraw { 497 u32 next; /* reserved for F/W use */ 498 u32 prev; /* reserved for F/W use */ 499 u32 addr[2]; 500 u32 count; 501 u32 flags; /* reserved for F/W use */ 502 }; 503 504 struct sge_ieee1212 { 505 u32 addrLow; 506 u32 addrHigh; 507 u32 length; 508 u32 flags; 509 }; 510 511 /* 512 * SGMAP 513 * 514 * This is the SGMAP structure for all commands that use 515 * 32-bit addressing. 516 */ 517 518 struct sgmap { 519 __le32 count; 520 struct sgentry sg[1]; 521 }; 522 523 struct user_sgmap { 524 u32 count; 525 struct user_sgentry sg[1]; 526 }; 527 528 struct sgmap64 { 529 __le32 count; 530 struct sgentry64 sg[1]; 531 }; 532 533 struct user_sgmap64 { 534 u32 count; 535 struct user_sgentry64 sg[1]; 536 }; 537 538 struct sgmapraw { 539 __le32 count; 540 struct sgentryraw sg[1]; 541 }; 542 543 struct user_sgmapraw { 544 u32 count; 545 struct user_sgentryraw sg[1]; 546 }; 547 548 struct creation_info 549 { 550 u8 buildnum; /* e.g., 588 */ 551 u8 usec; /* e.g., 588 */ 552 u8 via; /* e.g., 1 = FSU, 553 * 2 = API 554 */ 555 u8 year; /* e.g., 1997 = 97 */ 556 __le32 date; /* 557 * unsigned Month :4; // 1 - 12 558 * unsigned Day :6; // 1 - 32 559 * unsigned Hour :6; // 0 - 23 560 * unsigned Minute :6; // 0 - 60 561 * unsigned Second :6; // 0 - 60 562 */ 563 __le32 serial[2]; /* e.g., 0x1DEADB0BFAFAF001 */ 564 }; 565 566 567 /* 568 * Define all the constants needed for the communication interface 569 */ 570 571 /* 572 * Define how many queue entries each queue will have and the total 573 * number of entries for the entire communication interface. Also define 574 * how many queues we support. 575 * 576 * This has to match the controller 577 */ 578 579 #define NUMBER_OF_COMM_QUEUES 8 // 4 command; 4 response 580 #define HOST_HIGH_CMD_ENTRIES 4 581 #define HOST_NORM_CMD_ENTRIES 8 582 #define ADAP_HIGH_CMD_ENTRIES 4 583 #define ADAP_NORM_CMD_ENTRIES 512 584 #define HOST_HIGH_RESP_ENTRIES 4 585 #define HOST_NORM_RESP_ENTRIES 512 586 #define ADAP_HIGH_RESP_ENTRIES 4 587 #define ADAP_NORM_RESP_ENTRIES 8 588 589 #define TOTAL_QUEUE_ENTRIES \ 590 (HOST_NORM_CMD_ENTRIES + HOST_HIGH_CMD_ENTRIES + ADAP_NORM_CMD_ENTRIES + ADAP_HIGH_CMD_ENTRIES + \ 591 HOST_NORM_RESP_ENTRIES + HOST_HIGH_RESP_ENTRIES + ADAP_NORM_RESP_ENTRIES + ADAP_HIGH_RESP_ENTRIES) 592 593 594 /* 595 * Set the queues on a 16 byte alignment 596 */ 597 598 #define QUEUE_ALIGNMENT 16 599 600 /* 601 * The queue headers define the Communication Region queues. These 602 * are physically contiguous and accessible by both the adapter and the 603 * host. Even though all queue headers are in the same contiguous block 604 * they will be represented as individual units in the data structures. 605 */ 606 607 struct aac_entry { 608 __le32 size; /* Size in bytes of Fib which this QE points to */ 609 __le32 addr; /* Receiver address of the FIB */ 610 }; 611 612 /* 613 * The adapter assumes the ProducerIndex and ConsumerIndex are grouped 614 * adjacently and in that order. 615 */ 616 617 struct aac_qhdr { 618 __le64 header_addr;/* Address to hand the adapter to access 619 to this queue head */ 620 __le32 *producer; /* The producer index for this queue (host address) */ 621 __le32 *consumer; /* The consumer index for this queue (host address) */ 622 }; 623 624 /* 625 * Define all the events which the adapter would like to notify 626 * the host of. 627 */ 628 629 #define HostNormCmdQue 1 /* Change in host normal priority command queue */ 630 #define HostHighCmdQue 2 /* Change in host high priority command queue */ 631 #define HostNormRespQue 3 /* Change in host normal priority response queue */ 632 #define HostHighRespQue 4 /* Change in host high priority response queue */ 633 #define AdapNormRespNotFull 5 634 #define AdapHighRespNotFull 6 635 #define AdapNormCmdNotFull 7 636 #define AdapHighCmdNotFull 8 637 #define SynchCommandComplete 9 638 #define AdapInternalError 0xfe /* The adapter detected an internal error shutting down */ 639 640 /* 641 * Define all the events the host wishes to notify the 642 * adapter of. The first four values much match the Qid the 643 * corresponding queue. 644 */ 645 646 #define AdapNormCmdQue 2 647 #define AdapHighCmdQue 3 648 #define AdapNormRespQue 6 649 #define AdapHighRespQue 7 650 #define HostShutdown 8 651 #define HostPowerFail 9 652 #define FatalCommError 10 653 #define HostNormRespNotFull 11 654 #define HostHighRespNotFull 12 655 #define HostNormCmdNotFull 13 656 #define HostHighCmdNotFull 14 657 #define FastIo 15 658 #define AdapPrintfDone 16 659 660 /* 661 * Define all the queues that the adapter and host use to communicate 662 * Number them to match the physical queue layout. 663 */ 664 665 enum aac_queue_types { 666 HostNormCmdQueue = 0, /* Adapter to host normal priority command traffic */ 667 HostHighCmdQueue, /* Adapter to host high priority command traffic */ 668 AdapNormCmdQueue, /* Host to adapter normal priority command traffic */ 669 AdapHighCmdQueue, /* Host to adapter high priority command traffic */ 670 HostNormRespQueue, /* Adapter to host normal priority response traffic */ 671 HostHighRespQueue, /* Adapter to host high priority response traffic */ 672 AdapNormRespQueue, /* Host to adapter normal priority response traffic */ 673 AdapHighRespQueue /* Host to adapter high priority response traffic */ 674 }; 675 676 /* 677 * Assign type values to the FSA communication data structures 678 */ 679 680 #define FIB_MAGIC 0x0001 681 #define FIB_MAGIC2 0x0004 682 #define FIB_MAGIC2_64 0x0005 683 684 /* 685 * Define the priority levels the FSA communication routines support. 686 */ 687 688 #define FsaNormal 1 689 690 /* transport FIB header (PMC) */ 691 struct aac_fib_xporthdr { 692 __le64 HostAddress; /* FIB host address w/o xport header */ 693 __le32 Size; /* FIB size excluding xport header */ 694 __le32 Handle; /* driver handle to reference the FIB */ 695 __le64 Reserved[2]; 696 }; 697 698 #define ALIGN32 32 699 700 /* 701 * Define the FIB. The FIB is the where all the requested data and 702 * command information are put to the application on the FSA adapter. 703 */ 704 705 struct aac_fibhdr { 706 __le32 XferState; /* Current transfer state for this CCB */ 707 __le16 Command; /* Routing information for the destination */ 708 u8 StructType; /* Type FIB */ 709 u8 Unused; /* Unused */ 710 __le16 Size; /* Size of this FIB in bytes */ 711 __le16 SenderSize; /* Size of the FIB in the sender 712 (for response sizing) */ 713 __le32 SenderFibAddress; /* Host defined data in the FIB */ 714 union { 715 __le32 ReceiverFibAddress;/* Logical address of this FIB for 716 the adapter (old) */ 717 __le32 SenderFibAddressHigh;/* upper 32bit of phys. FIB address */ 718 __le32 TimeStamp; /* otherwise timestamp for FW internal use */ 719 } u; 720 __le32 Handle; /* FIB handle used for MSGU commnunication */ 721 u32 Previous; /* FW internal use */ 722 u32 Next; /* FW internal use */ 723 }; 724 725 struct hw_fib { 726 struct aac_fibhdr header; 727 u8 data[512-sizeof(struct aac_fibhdr)]; // Command specific data 728 }; 729 730 /* 731 * FIB commands 732 */ 733 734 #define TestCommandResponse 1 735 #define TestAdapterCommand 2 736 /* 737 * Lowlevel and comm commands 738 */ 739 #define LastTestCommand 100 740 #define ReinitHostNormCommandQueue 101 741 #define ReinitHostHighCommandQueue 102 742 #define ReinitHostHighRespQueue 103 743 #define ReinitHostNormRespQueue 104 744 #define ReinitAdapNormCommandQueue 105 745 #define ReinitAdapHighCommandQueue 107 746 #define ReinitAdapHighRespQueue 108 747 #define ReinitAdapNormRespQueue 109 748 #define InterfaceShutdown 110 749 #define DmaCommandFib 120 750 #define StartProfile 121 751 #define TermProfile 122 752 #define SpeedTest 123 753 #define TakeABreakPt 124 754 #define RequestPerfData 125 755 #define SetInterruptDefTimer 126 756 #define SetInterruptDefCount 127 757 #define GetInterruptDefStatus 128 758 #define LastCommCommand 129 759 /* 760 * Filesystem commands 761 */ 762 #define NuFileSystem 300 763 #define UFS 301 764 #define HostFileSystem 302 765 #define LastFileSystemCommand 303 766 /* 767 * Container Commands 768 */ 769 #define ContainerCommand 500 770 #define ContainerCommand64 501 771 #define ContainerRawIo 502 772 #define ContainerRawIo2 503 773 /* 774 * Scsi Port commands (scsi passthrough) 775 */ 776 #define ScsiPortCommand 600 777 #define ScsiPortCommand64 601 778 /* 779 * Misc house keeping and generic adapter initiated commands 780 */ 781 #define AifRequest 700 782 #define CheckRevision 701 783 #define FsaHostShutdown 702 784 #define RequestAdapterInfo 703 785 #define IsAdapterPaused 704 786 #define SendHostTime 705 787 #define RequestSupplementAdapterInfo 706 788 #define LastMiscCommand 707 789 790 /* 791 * Commands that will target the failover level on the FSA adapter 792 */ 793 794 enum fib_xfer_state { 795 HostOwned = (1<<0), 796 AdapterOwned = (1<<1), 797 FibInitialized = (1<<2), 798 FibEmpty = (1<<3), 799 AllocatedFromPool = (1<<4), 800 SentFromHost = (1<<5), 801 SentFromAdapter = (1<<6), 802 ResponseExpected = (1<<7), 803 NoResponseExpected = (1<<8), 804 AdapterProcessed = (1<<9), 805 HostProcessed = (1<<10), 806 HighPriority = (1<<11), 807 NormalPriority = (1<<12), 808 Async = (1<<13), 809 AsyncIo = (1<<13), // rpbfix: remove with new regime 810 PageFileIo = (1<<14), // rpbfix: remove with new regime 811 ShutdownRequest = (1<<15), 812 LazyWrite = (1<<16), // rpbfix: remove with new regime 813 AdapterMicroFib = (1<<17), 814 BIOSFibPath = (1<<18), 815 FastResponseCapable = (1<<19), 816 ApiFib = (1<<20), /* Its an API Fib */ 817 /* PMC NEW COMM: There is no more AIF data pending */ 818 NoMoreAifDataAvailable = (1<<21) 819 }; 820 821 /* 822 * The following defines needs to be updated any time there is an 823 * incompatible change made to the aac_init structure. 824 */ 825 826 #define ADAPTER_INIT_STRUCT_REVISION 3 827 #define ADAPTER_INIT_STRUCT_REVISION_4 4 // rocket science 828 #define ADAPTER_INIT_STRUCT_REVISION_6 6 /* PMC src */ 829 #define ADAPTER_INIT_STRUCT_REVISION_7 7 /* Denali */ 830 #define ADAPTER_INIT_STRUCT_REVISION_8 8 // Thor 831 832 union aac_init 833 { 834 struct _r7 { 835 __le32 init_struct_revision; 836 __le32 no_of_msix_vectors; 837 __le32 fsrev; 838 __le32 comm_header_address; 839 __le32 fast_io_comm_area_address; 840 __le32 adapter_fibs_physical_address; 841 __le32 adapter_fibs_virtual_address; 842 __le32 adapter_fibs_size; 843 __le32 adapter_fib_align; 844 __le32 printfbuf; 845 __le32 printfbufsiz; 846 /* number of 4k pages of host phys. mem. */ 847 __le32 host_phys_mem_pages; 848 /* number of seconds since 1970. */ 849 __le32 host_elapsed_seconds; 850 /* ADAPTER_INIT_STRUCT_REVISION_4 begins here */ 851 __le32 init_flags; /* flags for supported features */ 852 #define INITFLAGS_NEW_COMM_SUPPORTED 0x00000001 853 #define INITFLAGS_DRIVER_USES_UTC_TIME 0x00000010 854 #define INITFLAGS_DRIVER_SUPPORTS_PM 0x00000020 855 #define INITFLAGS_NEW_COMM_TYPE1_SUPPORTED 0x00000040 856 #define INITFLAGS_FAST_JBOD_SUPPORTED 0x00000080 857 #define INITFLAGS_NEW_COMM_TYPE2_SUPPORTED 0x00000100 858 #define INITFLAGS_DRIVER_SUPPORTS_HBA_MODE 0x00000400 859 __le32 max_io_commands; /* max outstanding commands */ 860 __le32 max_io_size; /* largest I/O command */ 861 __le32 max_fib_size; /* largest FIB to adapter */ 862 /* ADAPTER_INIT_STRUCT_REVISION_5 begins here */ 863 __le32 max_num_aif; /* max number of aif */ 864 /* ADAPTER_INIT_STRUCT_REVISION_6 begins here */ 865 /* Host RRQ (response queue) for SRC */ 866 __le32 host_rrq_addr_low; 867 __le32 host_rrq_addr_high; 868 } r7; 869 struct _r8 { 870 /* ADAPTER_INIT_STRUCT_REVISION_8 */ 871 __le32 init_struct_revision; 872 __le32 rr_queue_count; 873 __le32 host_elapsed_seconds; /* number of secs since 1970. */ 874 __le32 init_flags; 875 __le32 max_io_size; /* largest I/O command */ 876 __le32 max_num_aif; /* max number of aif */ 877 __le32 reserved1; 878 __le32 reserved2; 879 struct _rrq { 880 __le32 host_addr_low; 881 __le32 host_addr_high; 882 __le16 msix_id; 883 __le16 element_count; 884 __le16 comp_thresh; 885 __le16 unused; 886 } rrq[1]; /* up to 64 RRQ addresses */ 887 } r8; 888 }; 889 890 enum aac_log_level { 891 LOG_AAC_INIT = 10, 892 LOG_AAC_INFORMATIONAL = 20, 893 LOG_AAC_WARNING = 30, 894 LOG_AAC_LOW_ERROR = 40, 895 LOG_AAC_MEDIUM_ERROR = 50, 896 LOG_AAC_HIGH_ERROR = 60, 897 LOG_AAC_PANIC = 70, 898 LOG_AAC_DEBUG = 80, 899 LOG_AAC_WINDBG_PRINT = 90 900 }; 901 902 #define FSAFS_NTC_GET_ADAPTER_FIB_CONTEXT 0x030b 903 #define FSAFS_NTC_FIB_CONTEXT 0x030c 904 905 struct aac_dev; 906 struct fib; 907 struct scsi_cmnd; 908 909 struct adapter_ops 910 { 911 /* Low level operations */ 912 void (*adapter_interrupt)(struct aac_dev *dev); 913 void (*adapter_notify)(struct aac_dev *dev, u32 event); 914 void (*adapter_disable_int)(struct aac_dev *dev); 915 void (*adapter_enable_int)(struct aac_dev *dev); 916 int (*adapter_sync_cmd)(struct aac_dev *dev, u32 command, u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, u32 *status, u32 *r1, u32 *r2, u32 *r3, u32 *r4); 917 int (*adapter_check_health)(struct aac_dev *dev); 918 int (*adapter_restart)(struct aac_dev *dev, int bled, u8 reset_type); 919 void (*adapter_start)(struct aac_dev *dev); 920 /* Transport operations */ 921 int (*adapter_ioremap)(struct aac_dev * dev, u32 size); 922 irq_handler_t adapter_intr; 923 /* Packet operations */ 924 int (*adapter_deliver)(struct fib * fib); 925 int (*adapter_bounds)(struct aac_dev * dev, struct scsi_cmnd * cmd, u64 lba); 926 int (*adapter_read)(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count); 927 int (*adapter_write)(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count, int fua); 928 int (*adapter_scsi)(struct fib * fib, struct scsi_cmnd * cmd); 929 /* Administrative operations */ 930 int (*adapter_comm)(struct aac_dev * dev, int comm); 931 }; 932 933 /* 934 * Define which interrupt handler needs to be installed 935 */ 936 937 struct aac_driver_ident 938 { 939 int (*init)(struct aac_dev *dev); 940 char * name; 941 char * vname; 942 char * model; 943 u16 channels; 944 int quirks; 945 }; 946 /* 947 * Some adapter firmware needs communication memory 948 * below 2gig. This tells the init function to set the 949 * dma mask such that fib memory will be allocated where the 950 * adapter firmware can get to it. 951 */ 952 #define AAC_QUIRK_31BIT 0x0001 953 954 /* 955 * Some adapter firmware, when the raid card's cache is turned off, can not 956 * split up scatter gathers in order to deal with the limits of the 957 * underlying CHIM. This limit is 34 scatter gather elements. 958 */ 959 #define AAC_QUIRK_34SG 0x0002 960 961 /* 962 * This adapter is a slave (no Firmware) 963 */ 964 #define AAC_QUIRK_SLAVE 0x0004 965 966 /* 967 * This adapter is a master. 968 */ 969 #define AAC_QUIRK_MASTER 0x0008 970 971 /* 972 * Some adapter firmware perform poorly when it must split up scatter gathers 973 * in order to deal with the limits of the underlying CHIM. This limit in this 974 * class of adapters is 17 scatter gather elements. 975 */ 976 #define AAC_QUIRK_17SG 0x0010 977 978 /* 979 * Some adapter firmware does not support 64 bit scsi passthrough 980 * commands. 981 */ 982 #define AAC_QUIRK_SCSI_32 0x0020 983 984 /* 985 * SRC based adapters support the AifReqEvent functions 986 */ 987 #define AAC_QUIRK_SRC 0x0040 988 989 /* 990 * The adapter interface specs all queues to be located in the same 991 * physically contiguous block. The host structure that defines the 992 * commuication queues will assume they are each a separate physically 993 * contiguous memory region that will support them all being one big 994 * contiguous block. 995 * There is a command and response queue for each level and direction of 996 * commuication. These regions are accessed by both the host and adapter. 997 */ 998 999 struct aac_queue { 1000 u64 logical; /*address we give the adapter */ 1001 struct aac_entry *base; /*system virtual address */ 1002 struct aac_qhdr headers; /*producer,consumer q headers*/ 1003 u32 entries; /*Number of queue entries */ 1004 wait_queue_head_t qfull; /*Event to wait on if q full */ 1005 wait_queue_head_t cmdready; /*Cmd ready from the adapter */ 1006 /* This is only valid for adapter to host command queues. */ 1007 spinlock_t *lock; /* Spinlock for this queue must take this lock before accessing the lock */ 1008 spinlock_t lockdata; /* Actual lock (used only on one side of the lock) */ 1009 struct list_head cmdq; /* A queue of FIBs which need to be prcessed by the FS thread. This is */ 1010 /* only valid for command queues which receive entries from the adapter. */ 1011 /* Number of entries on outstanding queue. */ 1012 atomic_t numpending; 1013 struct aac_dev * dev; /* Back pointer to adapter structure */ 1014 }; 1015 1016 /* 1017 * Message queues. The order here is important, see also the 1018 * queue type ordering 1019 */ 1020 1021 struct aac_queue_block 1022 { 1023 struct aac_queue queue[8]; 1024 }; 1025 1026 /* 1027 * SaP1 Message Unit Registers 1028 */ 1029 1030 struct sa_drawbridge_CSR { 1031 /* Offset | Name */ 1032 __le32 reserved[10]; /* 00h-27h | Reserved */ 1033 u8 LUT_Offset; /* 28h | Lookup Table Offset */ 1034 u8 reserved1[3]; /* 29h-2bh | Reserved */ 1035 __le32 LUT_Data; /* 2ch | Looup Table Data */ 1036 __le32 reserved2[26]; /* 30h-97h | Reserved */ 1037 __le16 PRICLEARIRQ; /* 98h | Primary Clear Irq */ 1038 __le16 SECCLEARIRQ; /* 9ah | Secondary Clear Irq */ 1039 __le16 PRISETIRQ; /* 9ch | Primary Set Irq */ 1040 __le16 SECSETIRQ; /* 9eh | Secondary Set Irq */ 1041 __le16 PRICLEARIRQMASK;/* a0h | Primary Clear Irq Mask */ 1042 __le16 SECCLEARIRQMASK;/* a2h | Secondary Clear Irq Mask */ 1043 __le16 PRISETIRQMASK; /* a4h | Primary Set Irq Mask */ 1044 __le16 SECSETIRQMASK; /* a6h | Secondary Set Irq Mask */ 1045 __le32 MAILBOX0; /* a8h | Scratchpad 0 */ 1046 __le32 MAILBOX1; /* ach | Scratchpad 1 */ 1047 __le32 MAILBOX2; /* b0h | Scratchpad 2 */ 1048 __le32 MAILBOX3; /* b4h | Scratchpad 3 */ 1049 __le32 MAILBOX4; /* b8h | Scratchpad 4 */ 1050 __le32 MAILBOX5; /* bch | Scratchpad 5 */ 1051 __le32 MAILBOX6; /* c0h | Scratchpad 6 */ 1052 __le32 MAILBOX7; /* c4h | Scratchpad 7 */ 1053 __le32 ROM_Setup_Data; /* c8h | Rom Setup and Data */ 1054 __le32 ROM_Control_Addr;/* cch | Rom Control and Address */ 1055 __le32 reserved3[12]; /* d0h-ffh | reserved */ 1056 __le32 LUT[64]; /* 100h-1ffh | Lookup Table Entries */ 1057 }; 1058 1059 #define Mailbox0 SaDbCSR.MAILBOX0 1060 #define Mailbox1 SaDbCSR.MAILBOX1 1061 #define Mailbox2 SaDbCSR.MAILBOX2 1062 #define Mailbox3 SaDbCSR.MAILBOX3 1063 #define Mailbox4 SaDbCSR.MAILBOX4 1064 #define Mailbox5 SaDbCSR.MAILBOX5 1065 #define Mailbox6 SaDbCSR.MAILBOX6 1066 #define Mailbox7 SaDbCSR.MAILBOX7 1067 1068 #define DoorbellReg_p SaDbCSR.PRISETIRQ 1069 #define DoorbellReg_s SaDbCSR.SECSETIRQ 1070 #define DoorbellClrReg_p SaDbCSR.PRICLEARIRQ 1071 1072 1073 #define DOORBELL_0 0x0001 1074 #define DOORBELL_1 0x0002 1075 #define DOORBELL_2 0x0004 1076 #define DOORBELL_3 0x0008 1077 #define DOORBELL_4 0x0010 1078 #define DOORBELL_5 0x0020 1079 #define DOORBELL_6 0x0040 1080 1081 1082 #define PrintfReady DOORBELL_5 1083 #define PrintfDone DOORBELL_5 1084 1085 struct sa_registers { 1086 struct sa_drawbridge_CSR SaDbCSR; /* 98h - c4h */ 1087 }; 1088 1089 1090 #define SA_INIT_NUM_MSIXVECTORS 1 1091 #define SA_MINIPORT_REVISION SA_INIT_NUM_MSIXVECTORS 1092 1093 #define sa_readw(AEP, CSR) readl(&((AEP)->regs.sa->CSR)) 1094 #define sa_readl(AEP, CSR) readl(&((AEP)->regs.sa->CSR)) 1095 #define sa_writew(AEP, CSR, value) writew(value, &((AEP)->regs.sa->CSR)) 1096 #define sa_writel(AEP, CSR, value) writel(value, &((AEP)->regs.sa->CSR)) 1097 1098 /* 1099 * Rx Message Unit Registers 1100 */ 1101 1102 struct rx_mu_registers { 1103 /* Local | PCI*| Name */ 1104 __le32 ARSR; /* 1300h | 00h | APIC Register Select Register */ 1105 __le32 reserved0; /* 1304h | 04h | Reserved */ 1106 __le32 AWR; /* 1308h | 08h | APIC Window Register */ 1107 __le32 reserved1; /* 130Ch | 0Ch | Reserved */ 1108 __le32 IMRx[2]; /* 1310h | 10h | Inbound Message Registers */ 1109 __le32 OMRx[2]; /* 1318h | 18h | Outbound Message Registers */ 1110 __le32 IDR; /* 1320h | 20h | Inbound Doorbell Register */ 1111 __le32 IISR; /* 1324h | 24h | Inbound Interrupt 1112 Status Register */ 1113 __le32 IIMR; /* 1328h | 28h | Inbound Interrupt 1114 Mask Register */ 1115 __le32 ODR; /* 132Ch | 2Ch | Outbound Doorbell Register */ 1116 __le32 OISR; /* 1330h | 30h | Outbound Interrupt 1117 Status Register */ 1118 __le32 OIMR; /* 1334h | 34h | Outbound Interrupt 1119 Mask Register */ 1120 __le32 reserved2; /* 1338h | 38h | Reserved */ 1121 __le32 reserved3; /* 133Ch | 3Ch | Reserved */ 1122 __le32 InboundQueue;/* 1340h | 40h | Inbound Queue Port relative to firmware */ 1123 __le32 OutboundQueue;/*1344h | 44h | Outbound Queue Port relative to firmware */ 1124 /* * Must access through ATU Inbound 1125 Translation Window */ 1126 }; 1127 1128 struct rx_inbound { 1129 __le32 Mailbox[8]; 1130 }; 1131 1132 #define INBOUNDDOORBELL_0 0x00000001 1133 #define INBOUNDDOORBELL_1 0x00000002 1134 #define INBOUNDDOORBELL_2 0x00000004 1135 #define INBOUNDDOORBELL_3 0x00000008 1136 #define INBOUNDDOORBELL_4 0x00000010 1137 #define INBOUNDDOORBELL_5 0x00000020 1138 #define INBOUNDDOORBELL_6 0x00000040 1139 1140 #define OUTBOUNDDOORBELL_0 0x00000001 1141 #define OUTBOUNDDOORBELL_1 0x00000002 1142 #define OUTBOUNDDOORBELL_2 0x00000004 1143 #define OUTBOUNDDOORBELL_3 0x00000008 1144 #define OUTBOUNDDOORBELL_4 0x00000010 1145 1146 #define InboundDoorbellReg MUnit.IDR 1147 #define OutboundDoorbellReg MUnit.ODR 1148 1149 struct rx_registers { 1150 struct rx_mu_registers MUnit; /* 1300h - 1347h */ 1151 __le32 reserved1[2]; /* 1348h - 134ch */ 1152 struct rx_inbound IndexRegs; 1153 }; 1154 1155 #define rx_readb(AEP, CSR) readb(&((AEP)->regs.rx->CSR)) 1156 #define rx_readl(AEP, CSR) readl(&((AEP)->regs.rx->CSR)) 1157 #define rx_writeb(AEP, CSR, value) writeb(value, &((AEP)->regs.rx->CSR)) 1158 #define rx_writel(AEP, CSR, value) writel(value, &((AEP)->regs.rx->CSR)) 1159 1160 /* 1161 * Rkt Message Unit Registers (same as Rx, except a larger reserve region) 1162 */ 1163 1164 #define rkt_mu_registers rx_mu_registers 1165 #define rkt_inbound rx_inbound 1166 1167 struct rkt_registers { 1168 struct rkt_mu_registers MUnit; /* 1300h - 1347h */ 1169 __le32 reserved1[1006]; /* 1348h - 22fch */ 1170 struct rkt_inbound IndexRegs; /* 2300h - */ 1171 }; 1172 1173 #define rkt_readb(AEP, CSR) readb(&((AEP)->regs.rkt->CSR)) 1174 #define rkt_readl(AEP, CSR) readl(&((AEP)->regs.rkt->CSR)) 1175 #define rkt_writeb(AEP, CSR, value) writeb(value, &((AEP)->regs.rkt->CSR)) 1176 #define rkt_writel(AEP, CSR, value) writel(value, &((AEP)->regs.rkt->CSR)) 1177 1178 /* 1179 * PMC SRC message unit registers 1180 */ 1181 1182 #define src_inbound rx_inbound 1183 1184 struct src_mu_registers { 1185 /* PCI*| Name */ 1186 __le32 reserved0[6]; /* 00h | Reserved */ 1187 __le32 IOAR[2]; /* 18h | IOA->host interrupt register */ 1188 __le32 IDR; /* 20h | Inbound Doorbell Register */ 1189 __le32 IISR; /* 24h | Inbound Int. Status Register */ 1190 __le32 reserved1[3]; /* 28h | Reserved */ 1191 __le32 OIMR; /* 34h | Outbound Int. Mask Register */ 1192 __le32 reserved2[25]; /* 38h | Reserved */ 1193 __le32 ODR_R; /* 9ch | Outbound Doorbell Read */ 1194 __le32 ODR_C; /* a0h | Outbound Doorbell Clear */ 1195 __le32 reserved3[3]; /* a4h | Reserved */ 1196 __le32 SCR0; /* b0h | Scratchpad 0 */ 1197 __le32 reserved4[2]; /* b4h | Reserved */ 1198 __le32 OMR; /* bch | Outbound Message Register */ 1199 __le32 IQ_L; /* c0h | Inbound Queue (Low address) */ 1200 __le32 IQ_H; /* c4h | Inbound Queue (High address) */ 1201 __le32 ODR_MSI; /* c8h | MSI register for sync./AIF */ 1202 __le32 reserved5; /* cch | Reserved */ 1203 __le32 IQN_L; /* d0h | Inbound (native cmd) low */ 1204 __le32 IQN_H; /* d4h | Inbound (native cmd) high */ 1205 }; 1206 1207 struct src_registers { 1208 struct src_mu_registers MUnit; /* 00h - cbh */ 1209 union { 1210 struct { 1211 __le32 reserved1[130786]; /* d8h - 7fc5fh */ 1212 struct src_inbound IndexRegs; /* 7fc60h */ 1213 } tupelo; 1214 struct { 1215 __le32 reserved1[970]; /* d8h - fffh */ 1216 struct src_inbound IndexRegs; /* 1000h */ 1217 } denali; 1218 } u; 1219 }; 1220 1221 #define src_readb(AEP, CSR) readb(&((AEP)->regs.src.bar0->CSR)) 1222 #define src_readl(AEP, CSR) readl(&((AEP)->regs.src.bar0->CSR)) 1223 #define src_writeb(AEP, CSR, value) writeb(value, \ 1224 &((AEP)->regs.src.bar0->CSR)) 1225 #define src_writel(AEP, CSR, value) writel(value, \ 1226 &((AEP)->regs.src.bar0->CSR)) 1227 #if defined(writeq) 1228 #define src_writeq(AEP, CSR, value) writeq(value, \ 1229 &((AEP)->regs.src.bar0->CSR)) 1230 #endif 1231 1232 #define SRC_ODR_SHIFT 12 1233 #define SRC_IDR_SHIFT 9 1234 1235 typedef void (*fib_callback)(void *ctxt, struct fib *fibctx); 1236 1237 struct aac_fib_context { 1238 s16 type; // used for verification of structure 1239 s16 size; 1240 u32 unique; // unique value representing this context 1241 ulong jiffies; // used for cleanup - dmb changed to ulong 1242 struct list_head next; // used to link context's into a linked list 1243 struct semaphore wait_sem; // this is used to wait for the next fib to arrive. 1244 int wait; // Set to true when thread is in WaitForSingleObject 1245 unsigned long count; // total number of FIBs on FibList 1246 struct list_head fib_list; // this holds fibs and their attachd hw_fibs 1247 }; 1248 1249 struct sense_data { 1250 u8 error_code; /* 70h (current errors), 71h(deferred errors) */ 1251 u8 valid:1; /* A valid bit of one indicates that the information */ 1252 /* field contains valid information as defined in the 1253 * SCSI-2 Standard. 1254 */ 1255 u8 segment_number; /* Only used for COPY, COMPARE, or COPY AND VERIFY Commands */ 1256 u8 sense_key:4; /* Sense Key */ 1257 u8 reserved:1; 1258 u8 ILI:1; /* Incorrect Length Indicator */ 1259 u8 EOM:1; /* End Of Medium - reserved for random access devices */ 1260 u8 filemark:1; /* Filemark - reserved for random access devices */ 1261 1262 u8 information[4]; /* for direct-access devices, contains the unsigned 1263 * logical block address or residue associated with 1264 * the sense key 1265 */ 1266 u8 add_sense_len; /* number of additional sense bytes to follow this field */ 1267 u8 cmnd_info[4]; /* not used */ 1268 u8 ASC; /* Additional Sense Code */ 1269 u8 ASCQ; /* Additional Sense Code Qualifier */ 1270 u8 FRUC; /* Field Replaceable Unit Code - not used */ 1271 u8 bit_ptr:3; /* indicates which byte of the CDB or parameter data 1272 * was in error 1273 */ 1274 u8 BPV:1; /* bit pointer valid (BPV): 1- indicates that 1275 * the bit_ptr field has valid value 1276 */ 1277 u8 reserved2:2; 1278 u8 CD:1; /* command data bit: 1- illegal parameter in CDB. 1279 * 0- illegal parameter in data. 1280 */ 1281 u8 SKSV:1; 1282 u8 field_ptr[2]; /* byte of the CDB or parameter data in error */ 1283 }; 1284 1285 struct fsa_dev_info { 1286 u64 last; 1287 u64 size; 1288 u32 type; 1289 u32 config_waiting_on; 1290 unsigned long config_waiting_stamp; 1291 u16 queue_depth; 1292 u8 config_needed; 1293 u8 valid; 1294 u8 ro; 1295 u8 locked; 1296 u8 deleted; 1297 char devname[8]; 1298 struct sense_data sense_data; 1299 u32 block_size; 1300 u8 identifier[16]; 1301 }; 1302 1303 struct fib { 1304 void *next; /* this is used by the allocator */ 1305 s16 type; 1306 s16 size; 1307 /* 1308 * The Adapter that this I/O is destined for. 1309 */ 1310 struct aac_dev *dev; 1311 /* 1312 * This is the event the sendfib routine will wait on if the 1313 * caller did not pass one and this is synch io. 1314 */ 1315 struct semaphore event_wait; 1316 spinlock_t event_lock; 1317 1318 u32 done; /* gets set to 1 when fib is complete */ 1319 fib_callback callback; 1320 void *callback_data; 1321 u32 flags; // u32 dmb was ulong 1322 /* 1323 * And for the internal issue/reply queues (we may be able 1324 * to merge these two) 1325 */ 1326 struct list_head fiblink; 1327 void *data; 1328 u32 vector_no; 1329 struct hw_fib *hw_fib_va; /* also used for native */ 1330 dma_addr_t hw_fib_pa; /* physical address of hw_fib*/ 1331 dma_addr_t hw_sgl_pa; /* extra sgl for native */ 1332 dma_addr_t hw_error_pa; /* error buffer for native */ 1333 u32 hbacmd_size; /* cmd size for native */ 1334 }; 1335 1336 #define AAC_INIT 0 1337 #define AAC_RESCAN 1 1338 1339 #define AAC_DEVTYPE_RAID_MEMBER 1 1340 #define AAC_DEVTYPE_ARC_RAW 2 1341 #define AAC_DEVTYPE_NATIVE_RAW 3 1342 #define AAC_EXPOSE_DISK 0 1343 #define AAC_HIDE_DISK 3 1344 1345 #define AAC_SAFW_RESCAN_DELAY 10 1346 1347 struct aac_hba_map_info { 1348 __le32 rmw_nexus; /* nexus for native HBA devices */ 1349 u8 devtype; /* device type */ 1350 u8 reset_state; /* 0 - no reset, 1..x - */ 1351 /* after xth TM LUN reset */ 1352 u16 qd_limit; 1353 u8 expose; /*checks if to expose or not*/ 1354 u32 scan_counter; 1355 struct aac_ciss_identify_pd *safw_identify_resp; 1356 }; 1357 1358 /* 1359 * Adapter Information Block 1360 * 1361 * This is returned by the RequestAdapterInfo block 1362 */ 1363 1364 struct aac_adapter_info 1365 { 1366 __le32 platform; 1367 __le32 cpu; 1368 __le32 subcpu; 1369 __le32 clock; 1370 __le32 execmem; 1371 __le32 buffermem; 1372 __le32 totalmem; 1373 __le32 kernelrev; 1374 __le32 kernelbuild; 1375 __le32 monitorrev; 1376 __le32 monitorbuild; 1377 __le32 hwrev; 1378 __le32 hwbuild; 1379 __le32 biosrev; 1380 __le32 biosbuild; 1381 __le32 cluster; 1382 __le32 clusterchannelmask; 1383 __le32 serial[2]; 1384 __le32 battery; 1385 __le32 options; 1386 __le32 OEM; 1387 }; 1388 1389 struct aac_supplement_adapter_info 1390 { 1391 u8 adapter_type_text[17+1]; 1392 u8 pad[2]; 1393 __le32 flash_memory_byte_size; 1394 __le32 flash_image_id; 1395 __le32 max_number_ports; 1396 __le32 version; 1397 __le32 feature_bits; 1398 u8 slot_number; 1399 u8 reserved_pad0[3]; 1400 u8 build_date[12]; 1401 __le32 current_number_ports; 1402 struct { 1403 u8 assembly_pn[8]; 1404 u8 fru_pn[8]; 1405 u8 battery_fru_pn[8]; 1406 u8 ec_version_string[8]; 1407 u8 tsid[12]; 1408 } vpd_info; 1409 __le32 flash_firmware_revision; 1410 __le32 flash_firmware_build; 1411 __le32 raid_type_morph_options; 1412 __le32 flash_firmware_boot_revision; 1413 __le32 flash_firmware_boot_build; 1414 u8 mfg_pcba_serial_no[12]; 1415 u8 mfg_wwn_name[8]; 1416 __le32 supported_options2; 1417 __le32 struct_expansion; 1418 /* StructExpansion == 1 */ 1419 __le32 feature_bits3; 1420 __le32 supported_performance_modes; 1421 u8 host_bus_type; /* uses HOST_BUS_TYPE_xxx defines */ 1422 u8 host_bus_width; /* actual width in bits or links */ 1423 u16 host_bus_speed; /* actual bus speed/link rate in MHz */ 1424 u8 max_rrc_drives; /* max. number of ITP-RRC drives/pool */ 1425 u8 max_disk_xtasks; /* max. possible num of DiskX Tasks */ 1426 1427 u8 cpld_ver_loaded; 1428 u8 cpld_ver_in_flash; 1429 1430 __le64 max_rrc_capacity; 1431 __le32 compiled_max_hist_log_level; 1432 u8 custom_board_name[12]; 1433 u16 supported_cntlr_mode; /* identify supported controller mode */ 1434 u16 reserved_for_future16; 1435 __le32 supported_options3; /* reserved for future options */ 1436 1437 __le16 virt_device_bus; /* virt. SCSI device for Thor */ 1438 __le16 virt_device_target; 1439 __le16 virt_device_lun; 1440 __le16 unused; 1441 __le32 reserved_for_future_growth[68]; 1442 1443 }; 1444 #define AAC_FEATURE_FALCON cpu_to_le32(0x00000010) 1445 #define AAC_FEATURE_JBOD cpu_to_le32(0x08000000) 1446 /* SupportedOptions2 */ 1447 #define AAC_OPTION_MU_RESET cpu_to_le32(0x00000001) 1448 #define AAC_OPTION_IGNORE_RESET cpu_to_le32(0x00000002) 1449 #define AAC_OPTION_POWER_MANAGEMENT cpu_to_le32(0x00000004) 1450 #define AAC_OPTION_DOORBELL_RESET cpu_to_le32(0x00004000) 1451 /* 4KB sector size */ 1452 #define AAC_OPTION_VARIABLE_BLOCK_SIZE cpu_to_le32(0x00040000) 1453 /* 240 simple volume support */ 1454 #define AAC_OPTION_SUPPORTED_240_VOLUMES cpu_to_le32(0x10000000) 1455 /* 1456 * Supports FIB dump sync command send prior to IOP_RESET 1457 */ 1458 #define AAC_OPTION_SUPPORTED3_IOP_RESET_FIB_DUMP cpu_to_le32(0x00004000) 1459 #define AAC_SIS_VERSION_V3 3 1460 #define AAC_SIS_SLOT_UNKNOWN 0xFF 1461 1462 #define GetBusInfo 0x00000009 1463 struct aac_bus_info { 1464 __le32 Command; /* VM_Ioctl */ 1465 __le32 ObjType; /* FT_DRIVE */ 1466 __le32 MethodId; /* 1 = SCSI Layer */ 1467 __le32 ObjectId; /* Handle */ 1468 __le32 CtlCmd; /* GetBusInfo */ 1469 }; 1470 1471 struct aac_bus_info_response { 1472 __le32 Status; /* ST_OK */ 1473 __le32 ObjType; 1474 __le32 MethodId; /* unused */ 1475 __le32 ObjectId; /* unused */ 1476 __le32 CtlCmd; /* unused */ 1477 __le32 ProbeComplete; 1478 __le32 BusCount; 1479 __le32 TargetsPerBus; 1480 u8 InitiatorBusId[10]; 1481 u8 BusValid[10]; 1482 }; 1483 1484 /* 1485 * Battery platforms 1486 */ 1487 #define AAC_BAT_REQ_PRESENT (1) 1488 #define AAC_BAT_REQ_NOTPRESENT (2) 1489 #define AAC_BAT_OPT_PRESENT (3) 1490 #define AAC_BAT_OPT_NOTPRESENT (4) 1491 #define AAC_BAT_NOT_SUPPORTED (5) 1492 /* 1493 * cpu types 1494 */ 1495 #define AAC_CPU_SIMULATOR (1) 1496 #define AAC_CPU_I960 (2) 1497 #define AAC_CPU_STRONGARM (3) 1498 1499 /* 1500 * Supported Options 1501 */ 1502 #define AAC_OPT_SNAPSHOT cpu_to_le32(1) 1503 #define AAC_OPT_CLUSTERS cpu_to_le32(1<<1) 1504 #define AAC_OPT_WRITE_CACHE cpu_to_le32(1<<2) 1505 #define AAC_OPT_64BIT_DATA cpu_to_le32(1<<3) 1506 #define AAC_OPT_HOST_TIME_FIB cpu_to_le32(1<<4) 1507 #define AAC_OPT_RAID50 cpu_to_le32(1<<5) 1508 #define AAC_OPT_4GB_WINDOW cpu_to_le32(1<<6) 1509 #define AAC_OPT_SCSI_UPGRADEABLE cpu_to_le32(1<<7) 1510 #define AAC_OPT_SOFT_ERR_REPORT cpu_to_le32(1<<8) 1511 #define AAC_OPT_SUPPORTED_RECONDITION cpu_to_le32(1<<9) 1512 #define AAC_OPT_SGMAP_HOST64 cpu_to_le32(1<<10) 1513 #define AAC_OPT_ALARM cpu_to_le32(1<<11) 1514 #define AAC_OPT_NONDASD cpu_to_le32(1<<12) 1515 #define AAC_OPT_SCSI_MANAGED cpu_to_le32(1<<13) 1516 #define AAC_OPT_RAID_SCSI_MODE cpu_to_le32(1<<14) 1517 #define AAC_OPT_SUPPLEMENT_ADAPTER_INFO cpu_to_le32(1<<16) 1518 #define AAC_OPT_NEW_COMM cpu_to_le32(1<<17) 1519 #define AAC_OPT_NEW_COMM_64 cpu_to_le32(1<<18) 1520 #define AAC_OPT_EXTENDED cpu_to_le32(1<<23) 1521 #define AAC_OPT_NATIVE_HBA cpu_to_le32(1<<25) 1522 #define AAC_OPT_NEW_COMM_TYPE1 cpu_to_le32(1<<28) 1523 #define AAC_OPT_NEW_COMM_TYPE2 cpu_to_le32(1<<29) 1524 #define AAC_OPT_NEW_COMM_TYPE3 cpu_to_le32(1<<30) 1525 #define AAC_OPT_NEW_COMM_TYPE4 cpu_to_le32(1<<31) 1526 1527 #define AAC_COMM_PRODUCER 0 1528 #define AAC_COMM_MESSAGE 1 1529 #define AAC_COMM_MESSAGE_TYPE1 3 1530 #define AAC_COMM_MESSAGE_TYPE2 4 1531 #define AAC_COMM_MESSAGE_TYPE3 5 1532 1533 #define AAC_EXTOPT_SA_FIRMWARE cpu_to_le32(1<<1) 1534 1535 /* MSIX context */ 1536 struct aac_msix_ctx { 1537 int vector_no; 1538 struct aac_dev *dev; 1539 }; 1540 1541 struct aac_dev 1542 { 1543 struct list_head entry; 1544 const char *name; 1545 int id; 1546 1547 /* 1548 * negotiated FIB settings 1549 */ 1550 unsigned int max_fib_size; 1551 unsigned int sg_tablesize; 1552 unsigned int max_num_aif; 1553 1554 unsigned int max_cmd_size; /* max_fib_size or MAX_NATIVE */ 1555 1556 /* 1557 * Map for 128 fib objects (64k) 1558 */ 1559 dma_addr_t hw_fib_pa; /* also used for native cmd */ 1560 struct hw_fib *hw_fib_va; /* also used for native cmd */ 1561 struct hw_fib *aif_base_va; 1562 /* 1563 * Fib Headers 1564 */ 1565 struct fib *fibs; 1566 1567 struct fib *free_fib; 1568 spinlock_t fib_lock; 1569 1570 struct mutex ioctl_mutex; 1571 struct mutex scan_mutex; 1572 struct aac_queue_block *queues; 1573 /* 1574 * The user API will use an IOCTL to register itself to receive 1575 * FIBs from the adapter. The following list is used to keep 1576 * track of all the threads that have requested these FIBs. The 1577 * mutex is used to synchronize access to all data associated 1578 * with the adapter fibs. 1579 */ 1580 struct list_head fib_list; 1581 1582 struct adapter_ops a_ops; 1583 unsigned long fsrev; /* Main driver's revision number */ 1584 1585 resource_size_t base_start; /* main IO base */ 1586 resource_size_t dbg_base; /* address of UART 1587 * debug buffer */ 1588 1589 resource_size_t base_size, dbg_size; /* Size of 1590 * mapped in region */ 1591 /* 1592 * Holds initialization info 1593 * to communicate with adapter 1594 */ 1595 union aac_init *init; 1596 dma_addr_t init_pa; /* Holds physical address of the init struct */ 1597 /* response queue (if AAC_COMM_MESSAGE_TYPE1) */ 1598 __le32 *host_rrq; 1599 dma_addr_t host_rrq_pa; /* phys. address */ 1600 /* index into rrq buffer */ 1601 u32 host_rrq_idx[AAC_MAX_MSIX]; 1602 atomic_t rrq_outstanding[AAC_MAX_MSIX]; 1603 u32 fibs_pushed_no; 1604 struct pci_dev *pdev; /* Our PCI interface */ 1605 /* pointer to buffer used for printf's from the adapter */ 1606 void *printfbuf; 1607 void *comm_addr; /* Base address of Comm area */ 1608 dma_addr_t comm_phys; /* Physical Address of Comm area */ 1609 size_t comm_size; 1610 1611 struct Scsi_Host *scsi_host_ptr; 1612 int maximum_num_containers; 1613 int maximum_num_physicals; 1614 int maximum_num_channels; 1615 struct fsa_dev_info *fsa_dev; 1616 struct task_struct *thread; 1617 struct delayed_work safw_rescan_work; 1618 int cardtype; 1619 /* 1620 *This lock will protect the two 32-bit 1621 *writes to the Inbound Queue 1622 */ 1623 spinlock_t iq_lock; 1624 1625 /* 1626 * The following is the device specific extension. 1627 */ 1628 #ifndef AAC_MIN_FOOTPRINT_SIZE 1629 # define AAC_MIN_FOOTPRINT_SIZE 8192 1630 # define AAC_MIN_SRC_BAR0_SIZE 0x400000 1631 # define AAC_MIN_SRC_BAR1_SIZE 0x800 1632 # define AAC_MIN_SRCV_BAR0_SIZE 0x100000 1633 # define AAC_MIN_SRCV_BAR1_SIZE 0x400 1634 #endif 1635 union 1636 { 1637 struct sa_registers __iomem *sa; 1638 struct rx_registers __iomem *rx; 1639 struct rkt_registers __iomem *rkt; 1640 struct { 1641 struct src_registers __iomem *bar0; 1642 char __iomem *bar1; 1643 } src; 1644 } regs; 1645 volatile void __iomem *base, *dbg_base_mapped; 1646 volatile struct rx_inbound __iomem *IndexRegs; 1647 u32 OIMR; /* Mask Register Cache */ 1648 /* 1649 * AIF thread states 1650 */ 1651 u32 aif_thread; 1652 struct aac_adapter_info adapter_info; 1653 struct aac_supplement_adapter_info supplement_adapter_info; 1654 /* These are in adapter info but they are in the io flow so 1655 * lets break them out so we don't have to do an AND to check them 1656 */ 1657 u8 nondasd_support; 1658 u8 jbod; 1659 u8 cache_protected; 1660 u8 dac_support; 1661 u8 needs_dac; 1662 u8 raid_scsi_mode; 1663 u8 comm_interface; 1664 u8 raw_io_interface; 1665 u8 raw_io_64; 1666 u8 printf_enabled; 1667 u8 in_reset; 1668 u8 msi; 1669 u8 sa_firmware; 1670 int management_fib_count; 1671 spinlock_t manage_lock; 1672 spinlock_t sync_lock; 1673 int sync_mode; 1674 struct fib *sync_fib; 1675 struct list_head sync_fib_list; 1676 u32 doorbell_mask; 1677 u32 max_msix; /* max. MSI-X vectors */ 1678 u32 vector_cap; /* MSI-X vector capab.*/ 1679 int msi_enabled; /* MSI/MSI-X enabled */ 1680 atomic_t msix_counter; 1681 u32 scan_counter; 1682 struct msix_entry msixentry[AAC_MAX_MSIX]; 1683 struct aac_msix_ctx aac_msix[AAC_MAX_MSIX]; /* context */ 1684 struct aac_hba_map_info hba_map[AAC_MAX_BUSES][AAC_MAX_TARGETS]; 1685 struct aac_ciss_phys_luns_resp *safw_phys_luns; 1686 u8 adapter_shutdown; 1687 u32 handle_pci_error; 1688 }; 1689 1690 #define aac_adapter_interrupt(dev) \ 1691 (dev)->a_ops.adapter_interrupt(dev) 1692 1693 #define aac_adapter_notify(dev, event) \ 1694 (dev)->a_ops.adapter_notify(dev, event) 1695 1696 #define aac_adapter_disable_int(dev) \ 1697 (dev)->a_ops.adapter_disable_int(dev) 1698 1699 #define aac_adapter_enable_int(dev) \ 1700 (dev)->a_ops.adapter_enable_int(dev) 1701 1702 #define aac_adapter_sync_cmd(dev, command, p1, p2, p3, p4, p5, p6, status, r1, r2, r3, r4) \ 1703 (dev)->a_ops.adapter_sync_cmd(dev, command, p1, p2, p3, p4, p5, p6, status, r1, r2, r3, r4) 1704 1705 #define aac_adapter_restart(dev, bled, reset_type) \ 1706 ((dev)->a_ops.adapter_restart(dev, bled, reset_type)) 1707 1708 #define aac_adapter_start(dev) \ 1709 ((dev)->a_ops.adapter_start(dev)) 1710 1711 #define aac_adapter_ioremap(dev, size) \ 1712 (dev)->a_ops.adapter_ioremap(dev, size) 1713 1714 #define aac_adapter_deliver(fib) \ 1715 ((fib)->dev)->a_ops.adapter_deliver(fib) 1716 1717 #define aac_adapter_bounds(dev,cmd,lba) \ 1718 dev->a_ops.adapter_bounds(dev,cmd,lba) 1719 1720 #define aac_adapter_read(fib,cmd,lba,count) \ 1721 ((fib)->dev)->a_ops.adapter_read(fib,cmd,lba,count) 1722 1723 #define aac_adapter_write(fib,cmd,lba,count,fua) \ 1724 ((fib)->dev)->a_ops.adapter_write(fib,cmd,lba,count,fua) 1725 1726 #define aac_adapter_scsi(fib,cmd) \ 1727 ((fib)->dev)->a_ops.adapter_scsi(fib,cmd) 1728 1729 #define aac_adapter_comm(dev,comm) \ 1730 (dev)->a_ops.adapter_comm(dev, comm) 1731 1732 #define FIB_CONTEXT_FLAG_TIMED_OUT (0x00000001) 1733 #define FIB_CONTEXT_FLAG (0x00000002) 1734 #define FIB_CONTEXT_FLAG_WAIT (0x00000004) 1735 #define FIB_CONTEXT_FLAG_FASTRESP (0x00000008) 1736 #define FIB_CONTEXT_FLAG_NATIVE_HBA (0x00000010) 1737 #define FIB_CONTEXT_FLAG_NATIVE_HBA_TMF (0x00000020) 1738 #define FIB_CONTEXT_FLAG_SCSI_CMD (0x00000040) 1739 1740 /* 1741 * Define the command values 1742 */ 1743 1744 #define Null 0 1745 #define GetAttributes 1 1746 #define SetAttributes 2 1747 #define Lookup 3 1748 #define ReadLink 4 1749 #define Read 5 1750 #define Write 6 1751 #define Create 7 1752 #define MakeDirectory 8 1753 #define SymbolicLink 9 1754 #define MakeNode 10 1755 #define Removex 11 1756 #define RemoveDirectoryx 12 1757 #define Rename 13 1758 #define Link 14 1759 #define ReadDirectory 15 1760 #define ReadDirectoryPlus 16 1761 #define FileSystemStatus 17 1762 #define FileSystemInfo 18 1763 #define PathConfigure 19 1764 #define Commit 20 1765 #define Mount 21 1766 #define UnMount 22 1767 #define Newfs 23 1768 #define FsCheck 24 1769 #define FsSync 25 1770 #define SimReadWrite 26 1771 #define SetFileSystemStatus 27 1772 #define BlockRead 28 1773 #define BlockWrite 29 1774 #define NvramIoctl 30 1775 #define FsSyncWait 31 1776 #define ClearArchiveBit 32 1777 #define SetAcl 33 1778 #define GetAcl 34 1779 #define AssignAcl 35 1780 #define FaultInsertion 36 /* Fault Insertion Command */ 1781 #define CrazyCache 37 /* Crazycache */ 1782 1783 #define MAX_FSACOMMAND_NUM 38 1784 1785 1786 /* 1787 * Define the status returns. These are very unixlike although 1788 * most are not in fact used 1789 */ 1790 1791 #define ST_OK 0 1792 #define ST_PERM 1 1793 #define ST_NOENT 2 1794 #define ST_IO 5 1795 #define ST_NXIO 6 1796 #define ST_E2BIG 7 1797 #define ST_MEDERR 8 1798 #define ST_ACCES 13 1799 #define ST_EXIST 17 1800 #define ST_XDEV 18 1801 #define ST_NODEV 19 1802 #define ST_NOTDIR 20 1803 #define ST_ISDIR 21 1804 #define ST_INVAL 22 1805 #define ST_FBIG 27 1806 #define ST_NOSPC 28 1807 #define ST_ROFS 30 1808 #define ST_MLINK 31 1809 #define ST_WOULDBLOCK 35 1810 #define ST_NAMETOOLONG 63 1811 #define ST_NOTEMPTY 66 1812 #define ST_DQUOT 69 1813 #define ST_STALE 70 1814 #define ST_REMOTE 71 1815 #define ST_NOT_READY 72 1816 #define ST_BADHANDLE 10001 1817 #define ST_NOT_SYNC 10002 1818 #define ST_BAD_COOKIE 10003 1819 #define ST_NOTSUPP 10004 1820 #define ST_TOOSMALL 10005 1821 #define ST_SERVERFAULT 10006 1822 #define ST_BADTYPE 10007 1823 #define ST_JUKEBOX 10008 1824 #define ST_NOTMOUNTED 10009 1825 #define ST_MAINTMODE 10010 1826 #define ST_STALEACL 10011 1827 1828 /* 1829 * On writes how does the client want the data written. 1830 */ 1831 1832 #define CACHE_CSTABLE 1 1833 #define CACHE_UNSTABLE 2 1834 1835 /* 1836 * Lets the client know at which level the data was committed on 1837 * a write request 1838 */ 1839 1840 #define CMFILE_SYNCH_NVRAM 1 1841 #define CMDATA_SYNCH_NVRAM 2 1842 #define CMFILE_SYNCH 3 1843 #define CMDATA_SYNCH 4 1844 #define CMUNSTABLE 5 1845 1846 #define RIO_TYPE_WRITE 0x0000 1847 #define RIO_TYPE_READ 0x0001 1848 #define RIO_SUREWRITE 0x0008 1849 1850 #define RIO2_IO_TYPE 0x0003 1851 #define RIO2_IO_TYPE_WRITE 0x0000 1852 #define RIO2_IO_TYPE_READ 0x0001 1853 #define RIO2_IO_TYPE_VERIFY 0x0002 1854 #define RIO2_IO_ERROR 0x0004 1855 #define RIO2_IO_SUREWRITE 0x0008 1856 #define RIO2_SGL_CONFORMANT 0x0010 1857 #define RIO2_SG_FORMAT 0xF000 1858 #define RIO2_SG_FORMAT_ARC 0x0000 1859 #define RIO2_SG_FORMAT_SRL 0x1000 1860 #define RIO2_SG_FORMAT_IEEE1212 0x2000 1861 1862 struct aac_read 1863 { 1864 __le32 command; 1865 __le32 cid; 1866 __le32 block; 1867 __le32 count; 1868 struct sgmap sg; // Must be last in struct because it is variable 1869 }; 1870 1871 struct aac_read64 1872 { 1873 __le32 command; 1874 __le16 cid; 1875 __le16 sector_count; 1876 __le32 block; 1877 __le16 pad; 1878 __le16 flags; 1879 struct sgmap64 sg; // Must be last in struct because it is variable 1880 }; 1881 1882 struct aac_read_reply 1883 { 1884 __le32 status; 1885 __le32 count; 1886 }; 1887 1888 struct aac_write 1889 { 1890 __le32 command; 1891 __le32 cid; 1892 __le32 block; 1893 __le32 count; 1894 __le32 stable; // Not used 1895 struct sgmap sg; // Must be last in struct because it is variable 1896 }; 1897 1898 struct aac_write64 1899 { 1900 __le32 command; 1901 __le16 cid; 1902 __le16 sector_count; 1903 __le32 block; 1904 __le16 pad; 1905 __le16 flags; 1906 struct sgmap64 sg; // Must be last in struct because it is variable 1907 }; 1908 struct aac_write_reply 1909 { 1910 __le32 status; 1911 __le32 count; 1912 __le32 committed; 1913 }; 1914 1915 struct aac_raw_io 1916 { 1917 __le32 block[2]; 1918 __le32 count; 1919 __le16 cid; 1920 __le16 flags; /* 00 W, 01 R */ 1921 __le16 bpTotal; /* reserved for F/W use */ 1922 __le16 bpComplete; /* reserved for F/W use */ 1923 struct sgmapraw sg; 1924 }; 1925 1926 struct aac_raw_io2 { 1927 __le32 blockLow; 1928 __le32 blockHigh; 1929 __le32 byteCount; 1930 __le16 cid; 1931 __le16 flags; /* RIO2 flags */ 1932 __le32 sgeFirstSize; /* size of first sge el. */ 1933 __le32 sgeNominalSize; /* size of 2nd sge el. (if conformant) */ 1934 u8 sgeCnt; /* only 8 bits required */ 1935 u8 bpTotal; /* reserved for F/W use */ 1936 u8 bpComplete; /* reserved for F/W use */ 1937 u8 sgeFirstIndex; /* reserved for F/W use */ 1938 u8 unused[4]; 1939 struct sge_ieee1212 sge[1]; 1940 }; 1941 1942 #define CT_FLUSH_CACHE 129 1943 struct aac_synchronize { 1944 __le32 command; /* VM_ContainerConfig */ 1945 __le32 type; /* CT_FLUSH_CACHE */ 1946 __le32 cid; 1947 __le32 parm1; 1948 __le32 parm2; 1949 __le32 parm3; 1950 __le32 parm4; 1951 __le32 count; /* sizeof(((struct aac_synchronize_reply *)NULL)->data) */ 1952 }; 1953 1954 struct aac_synchronize_reply { 1955 __le32 dummy0; 1956 __le32 dummy1; 1957 __le32 status; /* CT_OK */ 1958 __le32 parm1; 1959 __le32 parm2; 1960 __le32 parm3; 1961 __le32 parm4; 1962 __le32 parm5; 1963 u8 data[16]; 1964 }; 1965 1966 #define CT_POWER_MANAGEMENT 245 1967 #define CT_PM_START_UNIT 2 1968 #define CT_PM_STOP_UNIT 3 1969 #define CT_PM_UNIT_IMMEDIATE 1 1970 struct aac_power_management { 1971 __le32 command; /* VM_ContainerConfig */ 1972 __le32 type; /* CT_POWER_MANAGEMENT */ 1973 __le32 sub; /* CT_PM_* */ 1974 __le32 cid; 1975 __le32 parm; /* CT_PM_sub_* */ 1976 }; 1977 1978 #define CT_PAUSE_IO 65 1979 #define CT_RELEASE_IO 66 1980 struct aac_pause { 1981 __le32 command; /* VM_ContainerConfig */ 1982 __le32 type; /* CT_PAUSE_IO */ 1983 __le32 timeout; /* 10ms ticks */ 1984 __le32 min; 1985 __le32 noRescan; 1986 __le32 parm3; 1987 __le32 parm4; 1988 __le32 count; /* sizeof(((struct aac_pause_reply *)NULL)->data) */ 1989 }; 1990 1991 struct aac_srb 1992 { 1993 __le32 function; 1994 __le32 channel; 1995 __le32 id; 1996 __le32 lun; 1997 __le32 timeout; 1998 __le32 flags; 1999 __le32 count; // Data xfer size 2000 __le32 retry_limit; 2001 __le32 cdb_size; 2002 u8 cdb[16]; 2003 struct sgmap sg; 2004 }; 2005 2006 /* 2007 * This and associated data structs are used by the 2008 * ioctl caller and are in cpu order. 2009 */ 2010 struct user_aac_srb 2011 { 2012 u32 function; 2013 u32 channel; 2014 u32 id; 2015 u32 lun; 2016 u32 timeout; 2017 u32 flags; 2018 u32 count; // Data xfer size 2019 u32 retry_limit; 2020 u32 cdb_size; 2021 u8 cdb[16]; 2022 struct user_sgmap sg; 2023 }; 2024 2025 #define AAC_SENSE_BUFFERSIZE 30 2026 2027 struct aac_srb_reply 2028 { 2029 __le32 status; 2030 __le32 srb_status; 2031 __le32 scsi_status; 2032 __le32 data_xfer_length; 2033 __le32 sense_data_size; 2034 u8 sense_data[AAC_SENSE_BUFFERSIZE]; // Can this be SCSI_SENSE_BUFFERSIZE 2035 }; 2036 2037 struct aac_srb_unit { 2038 struct aac_srb srb; 2039 struct aac_srb_reply srb_reply; 2040 }; 2041 2042 /* 2043 * SRB Flags 2044 */ 2045 #define SRB_NoDataXfer 0x0000 2046 #define SRB_DisableDisconnect 0x0004 2047 #define SRB_DisableSynchTransfer 0x0008 2048 #define SRB_BypassFrozenQueue 0x0010 2049 #define SRB_DisableAutosense 0x0020 2050 #define SRB_DataIn 0x0040 2051 #define SRB_DataOut 0x0080 2052 2053 /* 2054 * SRB Functions - set in aac_srb->function 2055 */ 2056 #define SRBF_ExecuteScsi 0x0000 2057 #define SRBF_ClaimDevice 0x0001 2058 #define SRBF_IO_Control 0x0002 2059 #define SRBF_ReceiveEvent 0x0003 2060 #define SRBF_ReleaseQueue 0x0004 2061 #define SRBF_AttachDevice 0x0005 2062 #define SRBF_ReleaseDevice 0x0006 2063 #define SRBF_Shutdown 0x0007 2064 #define SRBF_Flush 0x0008 2065 #define SRBF_AbortCommand 0x0010 2066 #define SRBF_ReleaseRecovery 0x0011 2067 #define SRBF_ResetBus 0x0012 2068 #define SRBF_ResetDevice 0x0013 2069 #define SRBF_TerminateIO 0x0014 2070 #define SRBF_FlushQueue 0x0015 2071 #define SRBF_RemoveDevice 0x0016 2072 #define SRBF_DomainValidation 0x0017 2073 2074 /* 2075 * SRB SCSI Status - set in aac_srb->scsi_status 2076 */ 2077 #define SRB_STATUS_PENDING 0x00 2078 #define SRB_STATUS_SUCCESS 0x01 2079 #define SRB_STATUS_ABORTED 0x02 2080 #define SRB_STATUS_ABORT_FAILED 0x03 2081 #define SRB_STATUS_ERROR 0x04 2082 #define SRB_STATUS_BUSY 0x05 2083 #define SRB_STATUS_INVALID_REQUEST 0x06 2084 #define SRB_STATUS_INVALID_PATH_ID 0x07 2085 #define SRB_STATUS_NO_DEVICE 0x08 2086 #define SRB_STATUS_TIMEOUT 0x09 2087 #define SRB_STATUS_SELECTION_TIMEOUT 0x0A 2088 #define SRB_STATUS_COMMAND_TIMEOUT 0x0B 2089 #define SRB_STATUS_MESSAGE_REJECTED 0x0D 2090 #define SRB_STATUS_BUS_RESET 0x0E 2091 #define SRB_STATUS_PARITY_ERROR 0x0F 2092 #define SRB_STATUS_REQUEST_SENSE_FAILED 0x10 2093 #define SRB_STATUS_NO_HBA 0x11 2094 #define SRB_STATUS_DATA_OVERRUN 0x12 2095 #define SRB_STATUS_UNEXPECTED_BUS_FREE 0x13 2096 #define SRB_STATUS_PHASE_SEQUENCE_FAILURE 0x14 2097 #define SRB_STATUS_BAD_SRB_BLOCK_LENGTH 0x15 2098 #define SRB_STATUS_REQUEST_FLUSHED 0x16 2099 #define SRB_STATUS_DELAYED_RETRY 0x17 2100 #define SRB_STATUS_INVALID_LUN 0x20 2101 #define SRB_STATUS_INVALID_TARGET_ID 0x21 2102 #define SRB_STATUS_BAD_FUNCTION 0x22 2103 #define SRB_STATUS_ERROR_RECOVERY 0x23 2104 #define SRB_STATUS_NOT_STARTED 0x24 2105 #define SRB_STATUS_NOT_IN_USE 0x30 2106 #define SRB_STATUS_FORCE_ABORT 0x31 2107 #define SRB_STATUS_DOMAIN_VALIDATION_FAIL 0x32 2108 2109 /* 2110 * Object-Server / Volume-Manager Dispatch Classes 2111 */ 2112 2113 #define VM_Null 0 2114 #define VM_NameServe 1 2115 #define VM_ContainerConfig 2 2116 #define VM_Ioctl 3 2117 #define VM_FilesystemIoctl 4 2118 #define VM_CloseAll 5 2119 #define VM_CtBlockRead 6 2120 #define VM_CtBlockWrite 7 2121 #define VM_SliceBlockRead 8 /* raw access to configured "storage objects" */ 2122 #define VM_SliceBlockWrite 9 2123 #define VM_DriveBlockRead 10 /* raw access to physical devices */ 2124 #define VM_DriveBlockWrite 11 2125 #define VM_EnclosureMgt 12 /* enclosure management */ 2126 #define VM_Unused 13 /* used to be diskset management */ 2127 #define VM_CtBlockVerify 14 2128 #define VM_CtPerf 15 /* performance test */ 2129 #define VM_CtBlockRead64 16 2130 #define VM_CtBlockWrite64 17 2131 #define VM_CtBlockVerify64 18 2132 #define VM_CtHostRead64 19 2133 #define VM_CtHostWrite64 20 2134 #define VM_DrvErrTblLog 21 2135 #define VM_NameServe64 22 2136 #define VM_NameServeAllBlk 30 2137 2138 #define MAX_VMCOMMAND_NUM 23 /* used for sizing stats array - leave last */ 2139 2140 /* 2141 * Descriptive information (eg, vital stats) 2142 * that a content manager might report. The 2143 * FileArray filesystem component is one example 2144 * of a content manager. Raw mode might be 2145 * another. 2146 */ 2147 2148 struct aac_fsinfo { 2149 __le32 fsTotalSize; /* Consumed by fs, incl. metadata */ 2150 __le32 fsBlockSize; 2151 __le32 fsFragSize; 2152 __le32 fsMaxExtendSize; 2153 __le32 fsSpaceUnits; 2154 __le32 fsMaxNumFiles; 2155 __le32 fsNumFreeFiles; 2156 __le32 fsInodeDensity; 2157 }; /* valid iff ObjType == FT_FILESYS && !(ContentState & FSCS_NOTCLEAN) */ 2158 2159 struct aac_blockdevinfo { 2160 __le32 block_size; 2161 __le32 logical_phys_map; 2162 u8 identifier[16]; 2163 }; 2164 2165 union aac_contentinfo { 2166 struct aac_fsinfo filesys; 2167 struct aac_blockdevinfo bdevinfo; 2168 }; 2169 2170 /* 2171 * Query for Container Configuration Status 2172 */ 2173 2174 #define CT_GET_CONFIG_STATUS 147 2175 struct aac_get_config_status { 2176 __le32 command; /* VM_ContainerConfig */ 2177 __le32 type; /* CT_GET_CONFIG_STATUS */ 2178 __le32 parm1; 2179 __le32 parm2; 2180 __le32 parm3; 2181 __le32 parm4; 2182 __le32 parm5; 2183 __le32 count; /* sizeof(((struct aac_get_config_status_resp *)NULL)->data) */ 2184 }; 2185 2186 #define CFACT_CONTINUE 0 2187 #define CFACT_PAUSE 1 2188 #define CFACT_ABORT 2 2189 struct aac_get_config_status_resp { 2190 __le32 response; /* ST_OK */ 2191 __le32 dummy0; 2192 __le32 status; /* CT_OK */ 2193 __le32 parm1; 2194 __le32 parm2; 2195 __le32 parm3; 2196 __le32 parm4; 2197 __le32 parm5; 2198 struct { 2199 __le32 action; /* CFACT_CONTINUE, CFACT_PAUSE or CFACT_ABORT */ 2200 __le16 flags; 2201 __le16 count; 2202 } data; 2203 }; 2204 2205 /* 2206 * Accept the configuration as-is 2207 */ 2208 2209 #define CT_COMMIT_CONFIG 152 2210 2211 struct aac_commit_config { 2212 __le32 command; /* VM_ContainerConfig */ 2213 __le32 type; /* CT_COMMIT_CONFIG */ 2214 }; 2215 2216 /* 2217 * Query for Container Configuration Status 2218 */ 2219 2220 #define CT_GET_CONTAINER_COUNT 4 2221 struct aac_get_container_count { 2222 __le32 command; /* VM_ContainerConfig */ 2223 __le32 type; /* CT_GET_CONTAINER_COUNT */ 2224 }; 2225 2226 struct aac_get_container_count_resp { 2227 __le32 response; /* ST_OK */ 2228 __le32 dummy0; 2229 __le32 MaxContainers; 2230 __le32 ContainerSwitchEntries; 2231 __le32 MaxPartitions; 2232 __le32 MaxSimpleVolumes; 2233 }; 2234 2235 2236 /* 2237 * Query for "mountable" objects, ie, objects that are typically 2238 * associated with a drive letter on the client (host) side. 2239 */ 2240 2241 struct aac_mntent { 2242 __le32 oid; 2243 u8 name[16]; /* if applicable */ 2244 struct creation_info create_info; /* if applicable */ 2245 __le32 capacity; 2246 __le32 vol; /* substrate structure */ 2247 __le32 obj; /* FT_FILESYS, etc. */ 2248 __le32 state; /* unready for mounting, 2249 readonly, etc. */ 2250 union aac_contentinfo fileinfo; /* Info specific to content 2251 manager (eg, filesystem) */ 2252 __le32 altoid; /* != oid <==> snapshot or 2253 broken mirror exists */ 2254 __le32 capacityhigh; 2255 }; 2256 2257 #define FSCS_NOTCLEAN 0x0001 /* fsck is necessary before mounting */ 2258 #define FSCS_READONLY 0x0002 /* possible result of broken mirror */ 2259 #define FSCS_HIDDEN 0x0004 /* should be ignored - set during a clear */ 2260 #define FSCS_NOT_READY 0x0008 /* Array spinning up to fulfil request */ 2261 2262 struct aac_query_mount { 2263 __le32 command; 2264 __le32 type; 2265 __le32 count; 2266 }; 2267 2268 struct aac_mount { 2269 __le32 status; 2270 __le32 type; /* should be same as that requested */ 2271 __le32 count; 2272 struct aac_mntent mnt[1]; 2273 }; 2274 2275 #define CT_READ_NAME 130 2276 struct aac_get_name { 2277 __le32 command; /* VM_ContainerConfig */ 2278 __le32 type; /* CT_READ_NAME */ 2279 __le32 cid; 2280 __le32 parm1; 2281 __le32 parm2; 2282 __le32 parm3; 2283 __le32 parm4; 2284 __le32 count; /* sizeof(((struct aac_get_name_resp *)NULL)->data) */ 2285 }; 2286 2287 struct aac_get_name_resp { 2288 __le32 dummy0; 2289 __le32 dummy1; 2290 __le32 status; /* CT_OK */ 2291 __le32 parm1; 2292 __le32 parm2; 2293 __le32 parm3; 2294 __le32 parm4; 2295 __le32 parm5; 2296 u8 data[17]; 2297 }; 2298 2299 #define CT_CID_TO_32BITS_UID 165 2300 struct aac_get_serial { 2301 __le32 command; /* VM_ContainerConfig */ 2302 __le32 type; /* CT_CID_TO_32BITS_UID */ 2303 __le32 cid; 2304 }; 2305 2306 struct aac_get_serial_resp { 2307 __le32 dummy0; 2308 __le32 dummy1; 2309 __le32 status; /* CT_OK */ 2310 __le32 uid; 2311 }; 2312 2313 /* 2314 * The following command is sent to shut down each container. 2315 */ 2316 2317 struct aac_close { 2318 __le32 command; 2319 __le32 cid; 2320 }; 2321 2322 struct aac_query_disk 2323 { 2324 s32 cnum; 2325 s32 bus; 2326 s32 id; 2327 s32 lun; 2328 u32 valid; 2329 u32 locked; 2330 u32 deleted; 2331 s32 instance; 2332 s8 name[10]; 2333 u32 unmapped; 2334 }; 2335 2336 struct aac_delete_disk { 2337 u32 disknum; 2338 u32 cnum; 2339 }; 2340 2341 struct fib_ioctl 2342 { 2343 u32 fibctx; 2344 s32 wait; 2345 char __user *fib; 2346 }; 2347 2348 struct revision 2349 { 2350 u32 compat; 2351 __le32 version; 2352 __le32 build; 2353 }; 2354 2355 2356 /* 2357 * Ugly - non Linux like ioctl coding for back compat. 2358 */ 2359 2360 #define CTL_CODE(function, method) ( \ 2361 (4<< 16) | ((function) << 2) | (method) \ 2362 ) 2363 2364 /* 2365 * Define the method codes for how buffers are passed for I/O and FS 2366 * controls 2367 */ 2368 2369 #define METHOD_BUFFERED 0 2370 #define METHOD_NEITHER 3 2371 2372 /* 2373 * Filesystem ioctls 2374 */ 2375 2376 #define FSACTL_SENDFIB CTL_CODE(2050, METHOD_BUFFERED) 2377 #define FSACTL_SEND_RAW_SRB CTL_CODE(2067, METHOD_BUFFERED) 2378 #define FSACTL_DELETE_DISK 0x163 2379 #define FSACTL_QUERY_DISK 0x173 2380 #define FSACTL_OPEN_GET_ADAPTER_FIB CTL_CODE(2100, METHOD_BUFFERED) 2381 #define FSACTL_GET_NEXT_ADAPTER_FIB CTL_CODE(2101, METHOD_BUFFERED) 2382 #define FSACTL_CLOSE_GET_ADAPTER_FIB CTL_CODE(2102, METHOD_BUFFERED) 2383 #define FSACTL_MINIPORT_REV_CHECK CTL_CODE(2107, METHOD_BUFFERED) 2384 #define FSACTL_GET_PCI_INFO CTL_CODE(2119, METHOD_BUFFERED) 2385 #define FSACTL_FORCE_DELETE_DISK CTL_CODE(2120, METHOD_NEITHER) 2386 #define FSACTL_GET_CONTAINERS 2131 2387 #define FSACTL_SEND_LARGE_FIB CTL_CODE(2138, METHOD_BUFFERED) 2388 #define FSACTL_RESET_IOP CTL_CODE(2140, METHOD_BUFFERED) 2389 #define FSACTL_GET_HBA_INFO CTL_CODE(2150, METHOD_BUFFERED) 2390 /* flags defined for IOP & HW SOFT RESET */ 2391 #define HW_IOP_RESET 0x01 2392 #define HW_SOFT_RESET 0x02 2393 #define IOP_HWSOFT_RESET (HW_IOP_RESET | HW_SOFT_RESET) 2394 /* HW Soft Reset register offset */ 2395 #define IBW_SWR_OFFSET 0x4000 2396 #define SOFT_RESET_TIME 60 2397 2398 2399 2400 struct aac_common 2401 { 2402 /* 2403 * If this value is set to 1 then interrupt moderation will occur 2404 * in the base commuication support. 2405 */ 2406 u32 irq_mod; 2407 u32 peak_fibs; 2408 u32 zero_fibs; 2409 u32 fib_timeouts; 2410 /* 2411 * Statistical counters in debug mode 2412 */ 2413 #ifdef DBG 2414 u32 FibsSent; 2415 u32 FibRecved; 2416 u32 NativeSent; 2417 u32 NativeRecved; 2418 u32 NoResponseSent; 2419 u32 NoResponseRecved; 2420 u32 AsyncSent; 2421 u32 AsyncRecved; 2422 u32 NormalSent; 2423 u32 NormalRecved; 2424 #endif 2425 }; 2426 2427 extern struct aac_common aac_config; 2428 2429 /* 2430 * This is for management ioctl purpose only. 2431 */ 2432 struct aac_hba_info { 2433 2434 u8 driver_name[50]; 2435 u8 adapter_number; 2436 u8 system_io_bus_number; 2437 u8 device_number; 2438 u32 function_number; 2439 u32 vendor_id; 2440 u32 device_id; 2441 u32 sub_vendor_id; 2442 u32 sub_system_id; 2443 u32 mapped_base_address_size; 2444 u32 base_physical_address_high_part; 2445 u32 base_physical_address_low_part; 2446 2447 u32 max_command_size; 2448 u32 max_fib_size; 2449 u32 max_scatter_gather_from_os; 2450 u32 max_scatter_gather_to_fw; 2451 u32 max_outstanding_fibs; 2452 2453 u32 queue_start_threshold; 2454 u32 queue_dump_threshold; 2455 u32 max_io_size_queued; 2456 u32 outstanding_io; 2457 2458 u32 firmware_build_number; 2459 u32 bios_build_number; 2460 u32 driver_build_number; 2461 u32 serial_number_high_part; 2462 u32 serial_number_low_part; 2463 u32 supported_options; 2464 u32 feature_bits; 2465 u32 currentnumber_ports; 2466 2467 u8 new_comm_interface:1; 2468 u8 new_commands_supported:1; 2469 u8 disable_passthrough:1; 2470 u8 expose_non_dasd:1; 2471 u8 queue_allowed:1; 2472 u8 bled_check_enabled:1; 2473 u8 reserved1:1; 2474 u8 reserted2:1; 2475 2476 u32 reserved3[10]; 2477 2478 }; 2479 2480 /* 2481 * The following macro is used when sending and receiving FIBs. It is 2482 * only used for debugging. 2483 */ 2484 2485 #ifdef DBG 2486 #define FIB_COUNTER_INCREMENT(counter) (counter)++ 2487 #else 2488 #define FIB_COUNTER_INCREMENT(counter) 2489 #endif 2490 2491 /* 2492 * Adapter direct commands 2493 * Monitor/Kernel API 2494 */ 2495 2496 #define BREAKPOINT_REQUEST 0x00000004 2497 #define INIT_STRUCT_BASE_ADDRESS 0x00000005 2498 #define READ_PERMANENT_PARAMETERS 0x0000000a 2499 #define WRITE_PERMANENT_PARAMETERS 0x0000000b 2500 #define HOST_CRASHING 0x0000000d 2501 #define SEND_SYNCHRONOUS_FIB 0x0000000c 2502 #define COMMAND_POST_RESULTS 0x00000014 2503 #define GET_ADAPTER_PROPERTIES 0x00000019 2504 #define GET_DRIVER_BUFFER_PROPERTIES 0x00000023 2505 #define RCV_TEMP_READINGS 0x00000025 2506 #define GET_COMM_PREFERRED_SETTINGS 0x00000026 2507 #define IOP_RESET_FW_FIB_DUMP 0x00000034 2508 #define IOP_RESET 0x00001000 2509 #define IOP_RESET_ALWAYS 0x00001001 2510 #define RE_INIT_ADAPTER 0x000000ee 2511 2512 #define IOP_SRC_RESET_MASK 0x00000100 2513 2514 /* 2515 * Adapter Status Register 2516 * 2517 * Phase Staus mailbox is 32bits: 2518 * <31:16> = Phase Status 2519 * <15:0> = Phase 2520 * 2521 * The adapter reports is present state through the phase. Only 2522 * a single phase should be ever be set. Each phase can have multiple 2523 * phase status bits to provide more detailed information about the 2524 * state of the board. Care should be taken to ensure that any phase 2525 * status bits that are set when changing the phase are also valid 2526 * for the new phase or be cleared out. Adapter software (monitor, 2527 * iflash, kernel) is responsible for properly maintining the phase 2528 * status mailbox when it is running. 2529 * 2530 * MONKER_API Phases 2531 * 2532 * Phases are bit oriented. It is NOT valid to have multiple bits set 2533 */ 2534 2535 #define SELF_TEST_FAILED 0x00000004 2536 #define MONITOR_PANIC 0x00000020 2537 #define KERNEL_BOOTING 0x00000040 2538 #define KERNEL_UP_AND_RUNNING 0x00000080 2539 #define KERNEL_PANIC 0x00000100 2540 #define FLASH_UPD_PENDING 0x00002000 2541 #define FLASH_UPD_SUCCESS 0x00004000 2542 #define FLASH_UPD_FAILED 0x00008000 2543 #define FWUPD_TIMEOUT (5 * 60) 2544 2545 /* 2546 * Doorbell bit defines 2547 */ 2548 2549 #define DoorBellSyncCmdAvailable (1<<0) /* Host -> Adapter */ 2550 #define DoorBellPrintfDone (1<<5) /* Host -> Adapter */ 2551 #define DoorBellAdapterNormCmdReady (1<<1) /* Adapter -> Host */ 2552 #define DoorBellAdapterNormRespReady (1<<2) /* Adapter -> Host */ 2553 #define DoorBellAdapterNormCmdNotFull (1<<3) /* Adapter -> Host */ 2554 #define DoorBellAdapterNormRespNotFull (1<<4) /* Adapter -> Host */ 2555 #define DoorBellPrintfReady (1<<5) /* Adapter -> Host */ 2556 #define DoorBellAifPending (1<<6) /* Adapter -> Host */ 2557 2558 /* PMC specific outbound doorbell bits */ 2559 #define PmDoorBellResponseSent (1<<1) /* Adapter -> Host */ 2560 2561 /* 2562 * For FIB communication, we need all of the following things 2563 * to send back to the user. 2564 */ 2565 2566 #define AifCmdEventNotify 1 /* Notify of event */ 2567 #define AifEnConfigChange 3 /* Adapter configuration change */ 2568 #define AifEnContainerChange 4 /* Container configuration change */ 2569 #define AifEnDeviceFailure 5 /* SCSI device failed */ 2570 #define AifEnEnclosureManagement 13 /* EM_DRIVE_* */ 2571 #define EM_DRIVE_INSERTION 31 2572 #define EM_DRIVE_REMOVAL 32 2573 #define EM_SES_DRIVE_INSERTION 33 2574 #define EM_SES_DRIVE_REMOVAL 26 2575 #define AifEnBatteryEvent 14 /* Change in Battery State */ 2576 #define AifEnAddContainer 15 /* A new array was created */ 2577 #define AifEnDeleteContainer 16 /* A container was deleted */ 2578 #define AifEnExpEvent 23 /* Firmware Event Log */ 2579 #define AifExeFirmwarePanic 3 /* Firmware Event Panic */ 2580 #define AifHighPriority 3 /* Highest Priority Event */ 2581 #define AifEnAddJBOD 30 /* JBOD created */ 2582 #define AifEnDeleteJBOD 31 /* JBOD deleted */ 2583 2584 #define AifBuManagerEvent 42 /* Bu management*/ 2585 #define AifBuCacheDataLoss 10 2586 #define AifBuCacheDataRecover 11 2587 2588 #define AifCmdJobProgress 2 /* Progress report */ 2589 #define AifJobCtrZero 101 /* Array Zero progress */ 2590 #define AifJobStsSuccess 1 /* Job completes */ 2591 #define AifJobStsRunning 102 /* Job running */ 2592 #define AifCmdAPIReport 3 /* Report from other user of API */ 2593 #define AifCmdDriverNotify 4 /* Notify host driver of event */ 2594 #define AifDenMorphComplete 200 /* A morph operation completed */ 2595 #define AifDenVolumeExtendComplete 201 /* A volume extend completed */ 2596 #define AifReqJobList 100 /* Gets back complete job list */ 2597 #define AifReqJobsForCtr 101 /* Gets back jobs for specific container */ 2598 #define AifReqJobsForScsi 102 /* Gets back jobs for specific SCSI device */ 2599 #define AifReqJobReport 103 /* Gets back a specific job report or list of them */ 2600 #define AifReqTerminateJob 104 /* Terminates job */ 2601 #define AifReqSuspendJob 105 /* Suspends a job */ 2602 #define AifReqResumeJob 106 /* Resumes a job */ 2603 #define AifReqSendAPIReport 107 /* API generic report requests */ 2604 #define AifReqAPIJobStart 108 /* Start a job from the API */ 2605 #define AifReqAPIJobUpdate 109 /* Update a job report from the API */ 2606 #define AifReqAPIJobFinish 110 /* Finish a job from the API */ 2607 2608 /* PMC NEW COMM: Request the event data */ 2609 #define AifReqEvent 200 2610 #define AifRawDeviceRemove 203 /* RAW device deleted */ 2611 #define AifNativeDeviceAdd 204 /* native HBA device added */ 2612 #define AifNativeDeviceRemove 205 /* native HBA device removed */ 2613 2614 2615 /* 2616 * Adapter Initiated FIB command structures. Start with the adapter 2617 * initiated FIBs that really come from the adapter, and get responded 2618 * to by the host. 2619 */ 2620 2621 struct aac_aifcmd { 2622 __le32 command; /* Tell host what type of notify this is */ 2623 __le32 seqnum; /* To allow ordering of reports (if necessary) */ 2624 u8 data[1]; /* Undefined length (from kernel viewpoint) */ 2625 }; 2626 2627 /** 2628 * Convert capacity to cylinders 2629 * accounting for the fact capacity could be a 64 bit value 2630 * 2631 */ 2632 static inline unsigned int cap_to_cyls(sector_t capacity, unsigned divisor) 2633 { 2634 sector_div(capacity, divisor); 2635 return capacity; 2636 } 2637 2638 static inline int aac_adapter_check_health(struct aac_dev *dev) 2639 { 2640 if (unlikely(pci_channel_offline(dev->pdev))) 2641 return -1; 2642 2643 return (dev)->a_ops.adapter_check_health(dev); 2644 } 2645 2646 2647 int aac_scan_host(struct aac_dev *dev); 2648 2649 static inline void aac_schedule_safw_scan_worker(struct aac_dev *dev) 2650 { 2651 schedule_delayed_work(&dev->safw_rescan_work, AAC_SAFW_RESCAN_DELAY); 2652 } 2653 2654 static inline void aac_safw_rescan_worker(struct work_struct *work) 2655 { 2656 struct aac_dev *dev = container_of(to_delayed_work(work), 2657 struct aac_dev, safw_rescan_work); 2658 2659 wait_event(dev->scsi_host_ptr->host_wait, 2660 !scsi_host_in_recovery(dev->scsi_host_ptr)); 2661 2662 aac_scan_host(dev); 2663 } 2664 2665 static inline void aac_cancel_safw_rescan_worker(struct aac_dev *dev) 2666 { 2667 if (dev->sa_firmware) 2668 cancel_delayed_work_sync(&dev->safw_rescan_work); 2669 } 2670 2671 /* SCp.phase values */ 2672 #define AAC_OWNER_MIDLEVEL 0x101 2673 #define AAC_OWNER_LOWLEVEL 0x102 2674 #define AAC_OWNER_ERROR_HANDLER 0x103 2675 #define AAC_OWNER_FIRMWARE 0x106 2676 2677 void aac_safw_rescan_worker(struct work_struct *work); 2678 int aac_acquire_irq(struct aac_dev *dev); 2679 void aac_free_irq(struct aac_dev *dev); 2680 int aac_setup_safw_adapter(struct aac_dev *dev); 2681 const char *aac_driverinfo(struct Scsi_Host *); 2682 void aac_fib_vector_assign(struct aac_dev *dev); 2683 struct fib *aac_fib_alloc(struct aac_dev *dev); 2684 struct fib *aac_fib_alloc_tag(struct aac_dev *dev, struct scsi_cmnd *scmd); 2685 int aac_fib_setup(struct aac_dev *dev); 2686 void aac_fib_map_free(struct aac_dev *dev); 2687 void aac_fib_free(struct fib * context); 2688 void aac_fib_init(struct fib * context); 2689 void aac_printf(struct aac_dev *dev, u32 val); 2690 int aac_fib_send(u16 command, struct fib * context, unsigned long size, int priority, int wait, int reply, fib_callback callback, void *ctxt); 2691 int aac_hba_send(u8 command, struct fib *context, 2692 fib_callback callback, void *ctxt); 2693 int aac_consumer_get(struct aac_dev * dev, struct aac_queue * q, struct aac_entry **entry); 2694 void aac_consumer_free(struct aac_dev * dev, struct aac_queue * q, u32 qnum); 2695 int aac_fib_complete(struct fib * context); 2696 void aac_hba_callback(void *context, struct fib *fibptr); 2697 #define fib_data(fibctx) ((void *)(fibctx)->hw_fib_va->data) 2698 struct aac_dev *aac_init_adapter(struct aac_dev *dev); 2699 void aac_src_access_devreg(struct aac_dev *dev, int mode); 2700 void aac_set_intx_mode(struct aac_dev *dev); 2701 int aac_get_config_status(struct aac_dev *dev, int commit_flag); 2702 int aac_get_containers(struct aac_dev *dev); 2703 int aac_scsi_cmd(struct scsi_cmnd *cmd); 2704 int aac_dev_ioctl(struct aac_dev *dev, int cmd, void __user *arg); 2705 #ifndef shost_to_class 2706 #define shost_to_class(shost) &shost->shost_dev 2707 #endif 2708 ssize_t aac_get_serial_number(struct device *dev, char *buf); 2709 int aac_do_ioctl(struct aac_dev * dev, int cmd, void __user *arg); 2710 int aac_rx_init(struct aac_dev *dev); 2711 int aac_rkt_init(struct aac_dev *dev); 2712 int aac_nark_init(struct aac_dev *dev); 2713 int aac_sa_init(struct aac_dev *dev); 2714 int aac_src_init(struct aac_dev *dev); 2715 int aac_srcv_init(struct aac_dev *dev); 2716 int aac_queue_get(struct aac_dev * dev, u32 * index, u32 qid, struct hw_fib * hw_fib, int wait, struct fib * fibptr, unsigned long *nonotify); 2717 void aac_define_int_mode(struct aac_dev *dev); 2718 unsigned int aac_response_normal(struct aac_queue * q); 2719 unsigned int aac_command_normal(struct aac_queue * q); 2720 unsigned int aac_intr_normal(struct aac_dev *dev, u32 Index, 2721 int isAif, int isFastResponse, 2722 struct hw_fib *aif_fib); 2723 int aac_reset_adapter(struct aac_dev *dev, int forced, u8 reset_type); 2724 int aac_check_health(struct aac_dev * dev); 2725 int aac_command_thread(void *data); 2726 int aac_close_fib_context(struct aac_dev * dev, struct aac_fib_context *fibctx); 2727 int aac_fib_adapter_complete(struct fib * fibptr, unsigned short size); 2728 struct aac_driver_ident* aac_get_driver_ident(int devtype); 2729 int aac_get_adapter_info(struct aac_dev* dev); 2730 int aac_send_shutdown(struct aac_dev *dev); 2731 int aac_probe_container(struct aac_dev *dev, int cid); 2732 int _aac_rx_init(struct aac_dev *dev); 2733 int aac_rx_select_comm(struct aac_dev *dev, int comm); 2734 int aac_rx_deliver_producer(struct fib * fib); 2735 2736 static inline int aac_is_src(struct aac_dev *dev) 2737 { 2738 u16 device = dev->pdev->device; 2739 2740 if (device == PMC_DEVICE_S6 || 2741 device == PMC_DEVICE_S7 || 2742 device == PMC_DEVICE_S8) 2743 return 1; 2744 return 0; 2745 } 2746 2747 static inline int aac_supports_2T(struct aac_dev *dev) 2748 { 2749 return (dev->adapter_info.options & AAC_OPT_NEW_COMM_64); 2750 } 2751 2752 char * get_container_type(unsigned type); 2753 extern int numacb; 2754 extern char aac_driver_version[]; 2755 extern int startup_timeout; 2756 extern int aif_timeout; 2757 extern int expose_physicals; 2758 extern int aac_reset_devices; 2759 extern int aac_msi; 2760 extern int aac_commit; 2761 extern int update_interval; 2762 extern int check_interval; 2763 extern int aac_check_reset; 2764 extern int aac_fib_dump; 2765 #endif 2766