xref: /openbmc/linux/drivers/scsi/a2091.c (revision c8ec3743)
1 #include <linux/types.h>
2 #include <linux/init.h>
3 #include <linux/interrupt.h>
4 #include <linux/mm.h>
5 #include <linux/slab.h>
6 #include <linux/spinlock.h>
7 #include <linux/zorro.h>
8 #include <linux/module.h>
9 
10 #include <asm/page.h>
11 #include <asm/pgtable.h>
12 #include <asm/amigaints.h>
13 #include <asm/amigahw.h>
14 
15 #include "scsi.h"
16 #include "wd33c93.h"
17 #include "a2091.h"
18 
19 
20 struct a2091_hostdata {
21 	struct WD33C93_hostdata wh;
22 	struct a2091_scsiregs *regs;
23 };
24 
25 static irqreturn_t a2091_intr(int irq, void *data)
26 {
27 	struct Scsi_Host *instance = data;
28 	struct a2091_hostdata *hdata = shost_priv(instance);
29 	unsigned int status = hdata->regs->ISTR;
30 	unsigned long flags;
31 
32 	if (!(status & (ISTR_INT_F | ISTR_INT_P)) || !(status & ISTR_INTS))
33 		return IRQ_NONE;
34 
35 	spin_lock_irqsave(instance->host_lock, flags);
36 	wd33c93_intr(instance);
37 	spin_unlock_irqrestore(instance->host_lock, flags);
38 	return IRQ_HANDLED;
39 }
40 
41 static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
42 {
43 	struct Scsi_Host *instance = cmd->device->host;
44 	struct a2091_hostdata *hdata = shost_priv(instance);
45 	struct WD33C93_hostdata *wh = &hdata->wh;
46 	struct a2091_scsiregs *regs = hdata->regs;
47 	unsigned short cntr = CNTR_PDMD | CNTR_INTEN;
48 	unsigned long addr = virt_to_bus(cmd->SCp.ptr);
49 
50 	/* don't allow DMA if the physical address is bad */
51 	if (addr & A2091_XFER_MASK) {
52 		wh->dma_bounce_len = (cmd->SCp.this_residual + 511) & ~0x1ff;
53 		wh->dma_bounce_buffer = kmalloc(wh->dma_bounce_len,
54 						GFP_KERNEL);
55 
56 		/* can't allocate memory; use PIO */
57 		if (!wh->dma_bounce_buffer) {
58 			wh->dma_bounce_len = 0;
59 			return 1;
60 		}
61 
62 		/* get the physical address of the bounce buffer */
63 		addr = virt_to_bus(wh->dma_bounce_buffer);
64 
65 		/* the bounce buffer may not be in the first 16M of physmem */
66 		if (addr & A2091_XFER_MASK) {
67 			/* we could use chipmem... maybe later */
68 			kfree(wh->dma_bounce_buffer);
69 			wh->dma_bounce_buffer = NULL;
70 			wh->dma_bounce_len = 0;
71 			return 1;
72 		}
73 
74 		if (!dir_in) {
75 			/* copy to bounce buffer for a write */
76 			memcpy(wh->dma_bounce_buffer, cmd->SCp.ptr,
77 			       cmd->SCp.this_residual);
78 		}
79 	}
80 
81 	/* setup dma direction */
82 	if (!dir_in)
83 		cntr |= CNTR_DDIR;
84 
85 	/* remember direction */
86 	wh->dma_dir = dir_in;
87 
88 	regs->CNTR = cntr;
89 
90 	/* setup DMA *physical* address */
91 	regs->ACR = addr;
92 
93 	if (dir_in) {
94 		/* invalidate any cache */
95 		cache_clear(addr, cmd->SCp.this_residual);
96 	} else {
97 		/* push any dirty cache */
98 		cache_push(addr, cmd->SCp.this_residual);
99 	}
100 	/* start DMA */
101 	regs->ST_DMA = 1;
102 
103 	/* return success */
104 	return 0;
105 }
106 
107 static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt,
108 		     int status)
109 {
110 	struct a2091_hostdata *hdata = shost_priv(instance);
111 	struct WD33C93_hostdata *wh = &hdata->wh;
112 	struct a2091_scsiregs *regs = hdata->regs;
113 
114 	/* disable SCSI interrupts */
115 	unsigned short cntr = CNTR_PDMD;
116 
117 	if (!wh->dma_dir)
118 		cntr |= CNTR_DDIR;
119 
120 	/* disable SCSI interrupts */
121 	regs->CNTR = cntr;
122 
123 	/* flush if we were reading */
124 	if (wh->dma_dir) {
125 		regs->FLUSH = 1;
126 		while (!(regs->ISTR & ISTR_FE_FLG))
127 			;
128 	}
129 
130 	/* clear a possible interrupt */
131 	regs->CINT = 1;
132 
133 	/* stop DMA */
134 	regs->SP_DMA = 1;
135 
136 	/* restore the CONTROL bits (minus the direction flag) */
137 	regs->CNTR = CNTR_PDMD | CNTR_INTEN;
138 
139 	/* copy from a bounce buffer, if necessary */
140 	if (status && wh->dma_bounce_buffer) {
141 		if (wh->dma_dir)
142 			memcpy(SCpnt->SCp.ptr, wh->dma_bounce_buffer,
143 			       SCpnt->SCp.this_residual);
144 		kfree(wh->dma_bounce_buffer);
145 		wh->dma_bounce_buffer = NULL;
146 		wh->dma_bounce_len = 0;
147 	}
148 }
149 
150 static struct scsi_host_template a2091_scsi_template = {
151 	.module			= THIS_MODULE,
152 	.name			= "Commodore A2091/A590 SCSI",
153 	.show_info		= wd33c93_show_info,
154 	.write_info		= wd33c93_write_info,
155 	.proc_name		= "A2901",
156 	.queuecommand		= wd33c93_queuecommand,
157 	.eh_abort_handler	= wd33c93_abort,
158 	.eh_host_reset_handler	= wd33c93_host_reset,
159 	.can_queue		= CAN_QUEUE,
160 	.this_id		= 7,
161 	.sg_tablesize		= SG_ALL,
162 	.cmd_per_lun		= CMD_PER_LUN,
163 	.dma_boundary		= PAGE_SIZE - 1,
164 };
165 
166 static int a2091_probe(struct zorro_dev *z, const struct zorro_device_id *ent)
167 {
168 	struct Scsi_Host *instance;
169 	int error;
170 	struct a2091_scsiregs *regs;
171 	wd33c93_regs wdregs;
172 	struct a2091_hostdata *hdata;
173 
174 	if (!request_mem_region(z->resource.start, 256, "wd33c93"))
175 		return -EBUSY;
176 
177 	instance = scsi_host_alloc(&a2091_scsi_template,
178 				   sizeof(struct a2091_hostdata));
179 	if (!instance) {
180 		error = -ENOMEM;
181 		goto fail_alloc;
182 	}
183 
184 	instance->irq = IRQ_AMIGA_PORTS;
185 	instance->unique_id = z->slotaddr;
186 
187 	regs = ZTWO_VADDR(z->resource.start);
188 	regs->DAWR = DAWR_A2091;
189 
190 	wdregs.SASR = &regs->SASR;
191 	wdregs.SCMD = &regs->SCMD;
192 
193 	hdata = shost_priv(instance);
194 	hdata->wh.no_sync = 0xff;
195 	hdata->wh.fast = 0;
196 	hdata->wh.dma_mode = CTRL_DMA;
197 	hdata->regs = regs;
198 
199 	wd33c93_init(instance, wdregs, dma_setup, dma_stop, WD33C93_FS_8_10);
200 	error = request_irq(IRQ_AMIGA_PORTS, a2091_intr, IRQF_SHARED,
201 			    "A2091 SCSI", instance);
202 	if (error)
203 		goto fail_irq;
204 
205 	regs->CNTR = CNTR_PDMD | CNTR_INTEN;
206 
207 	error = scsi_add_host(instance, NULL);
208 	if (error)
209 		goto fail_host;
210 
211 	zorro_set_drvdata(z, instance);
212 
213 	scsi_scan_host(instance);
214 	return 0;
215 
216 fail_host:
217 	free_irq(IRQ_AMIGA_PORTS, instance);
218 fail_irq:
219 	scsi_host_put(instance);
220 fail_alloc:
221 	release_mem_region(z->resource.start, 256);
222 	return error;
223 }
224 
225 static void a2091_remove(struct zorro_dev *z)
226 {
227 	struct Scsi_Host *instance = zorro_get_drvdata(z);
228 	struct a2091_hostdata *hdata = shost_priv(instance);
229 
230 	hdata->regs->CNTR = 0;
231 	scsi_remove_host(instance);
232 	free_irq(IRQ_AMIGA_PORTS, instance);
233 	scsi_host_put(instance);
234 	release_mem_region(z->resource.start, 256);
235 }
236 
237 static struct zorro_device_id a2091_zorro_tbl[] = {
238 	{ ZORRO_PROD_CBM_A590_A2091_1 },
239 	{ ZORRO_PROD_CBM_A590_A2091_2 },
240 	{ 0 }
241 };
242 MODULE_DEVICE_TABLE(zorro, a2091_zorro_tbl);
243 
244 static struct zorro_driver a2091_driver = {
245 	.name		= "a2091",
246 	.id_table	= a2091_zorro_tbl,
247 	.probe		= a2091_probe,
248 	.remove		= a2091_remove,
249 };
250 
251 static int __init a2091_init(void)
252 {
253 	return zorro_register_driver(&a2091_driver);
254 }
255 module_init(a2091_init);
256 
257 static void __exit a2091_exit(void)
258 {
259 	zorro_unregister_driver(&a2091_driver);
260 }
261 module_exit(a2091_exit);
262 
263 MODULE_DESCRIPTION("Commodore A2091/A590 SCSI");
264 MODULE_LICENSE("GPL");
265