1menu "SCSI device support" 2 3config SCSI_MOD 4 tristate 5 default y if SCSI=n || SCSI=y 6 default m if SCSI=m 7 8config RAID_ATTRS 9 tristate "RAID Transport Class" 10 default n 11 depends on BLOCK 12 depends on SCSI_MOD 13 ---help--- 14 Provides RAID 15 16config SCSI 17 tristate "SCSI device support" 18 depends on BLOCK 19 select SCSI_DMA if HAS_DMA 20 select SG_POOL 21 select BLK_SCSI_REQUEST 22 ---help--- 23 If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or 24 any other SCSI device under Linux, say Y and make sure that you know 25 the name of your SCSI host adapter (the card inside your computer 26 that "speaks" the SCSI protocol, also called SCSI controller), 27 because you will be asked for it. 28 29 You also need to say Y here if you have a device which speaks 30 the SCSI protocol. Examples of this include the parallel port 31 version of the IOMEGA ZIP drive, USB storage devices, Fibre 32 Channel, and FireWire storage. 33 34 To compile this driver as a module, choose M here and read 35 <file:Documentation/scsi/scsi.txt>. 36 The module will be called scsi_mod. 37 38 However, do not compile this as a module if your root file system 39 (the one containing the directory /) is located on a SCSI device. 40 41config SCSI_DMA 42 bool 43 default n 44 45config SCSI_NETLINK 46 bool 47 default n 48 depends on NET 49 50config SCSI_MQ_DEFAULT 51 bool "SCSI: use blk-mq I/O path by default" 52 depends on SCSI 53 ---help--- 54 This option enables the new blk-mq based I/O path for SCSI 55 devices by default. With the option the scsi_mod.use_blk_mq 56 module/boot option defaults to Y, without it to N, but it can 57 still be overridden either way. 58 59 If unsure say N. 60 61config SCSI_PROC_FS 62 bool "legacy /proc/scsi/ support" 63 depends on SCSI && PROC_FS 64 default y 65 ---help--- 66 This option enables support for the various files in 67 /proc/scsi. In Linux 2.6 this has been superseded by 68 files in sysfs but many legacy applications rely on this. 69 70 If unsure say Y. 71 72comment "SCSI support type (disk, tape, CD-ROM)" 73 depends on SCSI 74 75config BLK_DEV_SD 76 tristate "SCSI disk support" 77 depends on SCSI 78 ---help--- 79 If you want to use SCSI hard disks, Fibre Channel disks, 80 Serial ATA (SATA) or Parallel ATA (PATA) hard disks, 81 USB storage or the SCSI or parallel port version of 82 the IOMEGA ZIP drive, say Y and read the SCSI-HOWTO, 83 the Disk-HOWTO and the Multi-Disk-HOWTO, available from 84 <http://www.tldp.org/docs.html#howto>. This is NOT for SCSI 85 CD-ROMs. 86 87 To compile this driver as a module, choose M here and read 88 <file:Documentation/scsi/scsi.txt>. 89 The module will be called sd_mod. 90 91 Do not compile this driver as a module if your root file system 92 (the one containing the directory /) is located on a SCSI disk. 93 In this case, do not compile the driver for your SCSI host adapter 94 (below) as a module either. 95 96config CHR_DEV_ST 97 tristate "SCSI tape support" 98 depends on SCSI 99 ---help--- 100 If you want to use a SCSI tape drive under Linux, say Y and read the 101 SCSI-HOWTO, available from 102 <http://www.tldp.org/docs.html#howto>, and 103 <file:Documentation/scsi/st.txt> in the kernel source. This is NOT 104 for SCSI CD-ROMs. 105 106 To compile this driver as a module, choose M here and read 107 <file:Documentation/scsi/scsi.txt>. The module will be called st. 108 109config CHR_DEV_OSST 110 tristate "SCSI OnStream SC-x0 tape support" 111 depends on SCSI 112 ---help--- 113 The OnStream SC-x0 SCSI tape drives cannot be driven by the 114 standard st driver, but instead need this special osst driver and 115 use the /dev/osstX char device nodes (major 206). Via usb-storage, 116 you may be able to drive the USB-x0 and DI-x0 drives as well. 117 Note that there is also a second generation of OnStream 118 tape drives (ADR-x0) that supports the standard SCSI-2 commands for 119 tapes (QIC-157) and can be driven by the standard driver st. 120 For more information, you may have a look at the SCSI-HOWTO 121 <http://www.tldp.org/docs.html#howto> and 122 <file:Documentation/scsi/osst.txt> in the kernel source. 123 More info on the OnStream driver may be found on 124 <http://sourceforge.net/projects/osst/> 125 Please also have a look at the standard st docu, as most of it 126 applies to osst as well. 127 128 To compile this driver as a module, choose M here and read 129 <file:Documentation/scsi/scsi.txt>. The module will be called osst. 130 131config BLK_DEV_SR 132 tristate "SCSI CDROM support" 133 depends on SCSI 134 ---help--- 135 If you want to use a CD or DVD drive attached to your computer 136 by SCSI, FireWire, USB or ATAPI, say Y and read the SCSI-HOWTO 137 and the CDROM-HOWTO at <http://www.tldp.org/docs.html#howto>. 138 139 Make sure to say Y or M to "ISO 9660 CD-ROM file system support". 140 141 To compile this driver as a module, choose M here and read 142 <file:Documentation/scsi/scsi.txt>. 143 The module will be called sr_mod. 144 145config BLK_DEV_SR_VENDOR 146 bool "Enable vendor-specific extensions (for SCSI CDROM)" 147 depends on BLK_DEV_SR 148 help 149 This enables the usage of vendor specific SCSI commands. This is 150 required to support multisession CDs with old NEC/TOSHIBA cdrom 151 drives (and HP Writers). If you have such a drive and get the first 152 session only, try saying Y here; everybody else says N. 153 154config CHR_DEV_SG 155 tristate "SCSI generic support" 156 depends on SCSI 157 ---help--- 158 If you want to use SCSI scanners, synthesizers or CD-writers or just 159 about anything having "SCSI" in its name other than hard disks, 160 CD-ROMs or tapes, say Y here. These won't be supported by the kernel 161 directly, so you need some additional software which knows how to 162 talk to these devices using the SCSI protocol: 163 164 For scanners, look at SANE (<http://www.sane-project.org/>). For CD 165 writer software look at Cdrtools 166 (<http://cdrecord.berlios.de/private/cdrecord.html>) 167 and for burning a "disk at once": CDRDAO 168 (<http://cdrdao.sourceforge.net/>). Cdparanoia is a high 169 quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>). 170 For other devices, it's possible that you'll have to write the 171 driver software yourself. Please read the file 172 <file:Documentation/scsi/scsi-generic.txt> for more information. 173 174 To compile this driver as a module, choose M here and read 175 <file:Documentation/scsi/scsi.txt>. The module will be called sg. 176 177 If unsure, say N. 178 179config CHR_DEV_SCH 180 tristate "SCSI media changer support" 181 depends on SCSI 182 ---help--- 183 This is a driver for SCSI media changers. Most common devices are 184 tape libraries and MOD/CDROM jukeboxes. *Real* jukeboxes, you 185 don't need this for those tiny 6-slot cdrom changers. Media 186 changers are listed as "Type: Medium Changer" in /proc/scsi/scsi. 187 If you have such hardware and want to use it with linux, say Y 188 here. Check <file:Documentation/scsi/scsi-changer.txt> for details. 189 190 If you want to compile this as a module ( = code which can be 191 inserted in and removed from the running kernel whenever you want), 192 say M here and read <file:Documentation/kbuild/modules.txt> and 193 <file:Documentation/scsi/scsi.txt>. The module will be called ch.o. 194 If unsure, say N. 195 196config SCSI_ENCLOSURE 197 tristate "SCSI Enclosure Support" 198 depends on SCSI && ENCLOSURE_SERVICES 199 depends on m || SCSI_SAS_ATTRS != m 200 help 201 Enclosures are devices sitting on or in SCSI backplanes that 202 manage devices. If you have a disk cage, the chances are that 203 it has an enclosure device. Selecting this option will just allow 204 certain enclosure conditions to be reported and is not required. 205 206config SCSI_CONSTANTS 207 bool "Verbose SCSI error reporting (kernel size += 36K)" 208 depends on SCSI 209 help 210 The error messages regarding your SCSI hardware will be easier to 211 understand if you say Y here; it will enlarge your kernel by about 212 36 KB. If in doubt, say Y. 213 214config SCSI_LOGGING 215 bool "SCSI logging facility" 216 depends on SCSI 217 ---help--- 218 This turns on a logging facility that can be used to debug a number 219 of SCSI related problems. 220 221 If you say Y here, no logging output will appear by default, but you 222 can enable logging by saying Y to "/proc file system support" and 223 "Sysctl support" below and executing the command 224 225 echo <bitmask> > /proc/sys/dev/scsi/logging_level 226 227 where <bitmask> is a four byte value representing the logging type 228 and logging level for each type of logging selected. 229 230 There are a number of logging types and you can find them in the 231 source at <file:drivers/scsi/scsi_logging.h>. The logging levels 232 are also described in that file and they determine the verbosity of 233 the logging for each logging type. 234 235 If you say N here, it may be harder to track down some types of SCSI 236 problems. If you say Y here your kernel will be somewhat larger, but 237 there should be no noticeable performance impact as long as you have 238 logging turned off. 239 240config SCSI_SCAN_ASYNC 241 bool "Asynchronous SCSI scanning" 242 depends on SCSI 243 help 244 The SCSI subsystem can probe for devices while the rest of the 245 system continues booting, and even probe devices on different 246 busses in parallel, leading to a significant speed-up. 247 248 You can override this choice by specifying "scsi_mod.scan=sync" 249 or async on the kernel's command line. 250 251 Note that this setting also affects whether resuming from 252 system suspend will be performed asynchronously. 253 254menu "SCSI Transports" 255 depends on SCSI 256 257config SCSI_SPI_ATTRS 258 tristate "Parallel SCSI (SPI) Transport Attributes" 259 depends on SCSI 260 help 261 If you wish to export transport-specific information about 262 each attached SCSI device to sysfs, say Y. Otherwise, say N. 263 264config SCSI_FC_ATTRS 265 tristate "FiberChannel Transport Attributes" 266 depends on SCSI && NET 267 select BLK_DEV_BSGLIB 268 select SCSI_NETLINK 269 help 270 If you wish to export transport-specific information about 271 each attached FiberChannel device to sysfs, say Y. 272 Otherwise, say N. 273 274config SCSI_ISCSI_ATTRS 275 tristate "iSCSI Transport Attributes" 276 depends on SCSI && NET 277 select BLK_DEV_BSGLIB 278 help 279 If you wish to export transport-specific information about 280 each attached iSCSI device to sysfs, say Y. 281 Otherwise, say N. 282 283config SCSI_SAS_ATTRS 284 tristate "SAS Transport Attributes" 285 depends on SCSI 286 select BLK_DEV_BSGLIB 287 help 288 If you wish to export transport-specific information about 289 each attached SAS device to sysfs, say Y. 290 291source "drivers/scsi/libsas/Kconfig" 292 293config SCSI_SRP_ATTRS 294 tristate "SRP Transport Attributes" 295 depends on SCSI 296 help 297 If you wish to export transport-specific information about 298 each attached SRP device to sysfs, say Y. 299 300endmenu 301 302menuconfig SCSI_LOWLEVEL 303 bool "SCSI low-level drivers" 304 depends on SCSI!=n 305 default y 306 307if SCSI_LOWLEVEL && SCSI 308 309config ISCSI_TCP 310 tristate "iSCSI Initiator over TCP/IP" 311 depends on SCSI && INET 312 select CRYPTO 313 select CRYPTO_MD5 314 select CRYPTO_CRC32C 315 select SCSI_ISCSI_ATTRS 316 help 317 The iSCSI Driver provides a host with the ability to access storage 318 through an IP network. The driver uses the iSCSI protocol to transport 319 SCSI requests and responses over a TCP/IP network between the host 320 (the "initiator") and "targets". Architecturally, the iSCSI driver 321 combines with the host's TCP/IP stack, network drivers, and Network 322 Interface Card (NIC) to provide the same functions as a SCSI or a 323 Fibre Channel (FC) adapter driver with a Host Bus Adapter (HBA). 324 325 To compile this driver as a module, choose M here: the 326 module will be called iscsi_tcp. 327 328 The userspace component needed to initialize the driver, documentation, 329 and sample configuration files can be found here: 330 331 http://open-iscsi.org 332 333config ISCSI_BOOT_SYSFS 334 tristate "iSCSI Boot Sysfs Interface" 335 default n 336 help 337 This option enables support for exposing iSCSI boot information 338 via sysfs to userspace. If you wish to export this information, 339 say Y. Otherwise, say N. 340 341source "drivers/scsi/cxgbi/Kconfig" 342source "drivers/scsi/bnx2i/Kconfig" 343source "drivers/scsi/bnx2fc/Kconfig" 344source "drivers/scsi/be2iscsi/Kconfig" 345source "drivers/scsi/cxlflash/Kconfig" 346 347config SGIWD93_SCSI 348 tristate "SGI WD93C93 SCSI Driver" 349 depends on SGI_HAS_WD93 && SCSI 350 help 351 If you have a Western Digital WD93 SCSI controller on 352 an SGI MIPS system, say Y. Otherwise, say N. 353 354config BLK_DEV_3W_XXXX_RAID 355 tristate "3ware 5/6/7/8xxx ATA-RAID support" 356 depends on PCI && SCSI 357 help 358 3ware is the only hardware ATA-Raid product in Linux to date. 359 This card is 2,4, or 8 channel master mode support only. 360 SCSI support required!!! 361 362 <http://www.3ware.com/> 363 364 Please read the comments at the top of 365 <file:drivers/scsi/3w-xxxx.c>. 366 367config SCSI_HPSA 368 tristate "HP Smart Array SCSI driver" 369 depends on PCI && SCSI 370 select CHECK_SIGNATURE 371 select SCSI_SAS_ATTRS 372 help 373 This driver supports HP Smart Array Controllers (circa 2009). 374 It is a SCSI alternative to the cciss driver, which is a block 375 driver. Anyone wishing to use HP Smart Array controllers who 376 would prefer the devices be presented to linux as SCSI devices, 377 rather than as generic block devices should say Y here. 378 379config SCSI_3W_9XXX 380 tristate "3ware 9xxx SATA-RAID support" 381 depends on PCI && SCSI 382 help 383 This driver supports the 9000 series 3ware SATA-RAID cards. 384 385 <http://www.amcc.com> 386 387 Please read the comments at the top of 388 <file:drivers/scsi/3w-9xxx.c>. 389 390config SCSI_3W_SAS 391 tristate "3ware 97xx SAS/SATA-RAID support" 392 depends on PCI && SCSI 393 help 394 This driver supports the LSI 3ware 9750 6Gb/s SAS/SATA-RAID cards. 395 396 <http://www.lsi.com> 397 398 Please read the comments at the top of 399 <file:drivers/scsi/3w-sas.c>. 400 401config SCSI_ACARD 402 tristate "ACARD SCSI support" 403 depends on PCI && SCSI 404 help 405 This driver supports the ACARD SCSI host adapter. 406 Support Chip <ATP870 ATP876 ATP880 ATP885> 407 To compile this driver as a module, choose M here: the 408 module will be called atp870u. 409 410config SCSI_AHA152X 411 tristate "Adaptec AHA152X/2825 support" 412 depends on ISA && SCSI 413 select SCSI_SPI_ATTRS 414 select CHECK_SIGNATURE 415 ---help--- 416 This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825 417 SCSI host adapters. It also works for the AVA-1505, but the IRQ etc. 418 must be manually specified in this case. 419 420 It is explained in section 3.3 of the SCSI-HOWTO, available from 421 <http://www.tldp.org/docs.html#howto>. You might also want to 422 read the file <file:Documentation/scsi/aha152x.txt>. 423 424 To compile this driver as a module, choose M here: the 425 module will be called aha152x. 426 427config SCSI_AHA1542 428 tristate "Adaptec AHA1542 support" 429 depends on ISA && SCSI && ISA_DMA_API 430 ---help--- 431 This is support for a SCSI host adapter. It is explained in section 432 3.4 of the SCSI-HOWTO, available from 433 <http://www.tldp.org/docs.html#howto>. Note that Trantor was 434 purchased by Adaptec, and some former Trantor products are being 435 sold under the Adaptec name. If it doesn't work out of the box, you 436 may have to change some settings in <file:drivers/scsi/aha1542.h>. 437 438 To compile this driver as a module, choose M here: the 439 module will be called aha1542. 440 441config SCSI_AHA1740 442 tristate "Adaptec AHA1740 support" 443 depends on EISA && SCSI 444 ---help--- 445 This is support for a SCSI host adapter. It is explained in section 446 3.5 of the SCSI-HOWTO, available from 447 <http://www.tldp.org/docs.html#howto>. If it doesn't work out 448 of the box, you may have to change some settings in 449 <file:drivers/scsi/aha1740.h>. 450 451 To compile this driver as a module, choose M here: the 452 module will be called aha1740. 453 454config SCSI_AACRAID 455 tristate "Adaptec AACRAID support" 456 depends on SCSI && PCI 457 help 458 This driver supports a variety of Dell, HP, Adaptec, IBM and 459 ICP storage products. For a list of supported products, refer 460 to <file:Documentation/scsi/aacraid.txt>. 461 462 To compile this driver as a module, choose M here: the module 463 will be called aacraid. 464 465 466source "drivers/scsi/aic7xxx/Kconfig.aic7xxx" 467source "drivers/scsi/aic7xxx/Kconfig.aic79xx" 468source "drivers/scsi/aic94xx/Kconfig" 469source "drivers/scsi/hisi_sas/Kconfig" 470source "drivers/scsi/mvsas/Kconfig" 471 472config SCSI_MVUMI 473 tristate "Marvell UMI driver" 474 depends on SCSI && PCI 475 help 476 Module for Marvell Universal Message Interface(UMI) driver 477 478 To compile this driver as a module, choose M here: the 479 module will be called mvumi. 480 481config SCSI_DPT_I2O 482 tristate "Adaptec I2O RAID support " 483 depends on SCSI && PCI && VIRT_TO_BUS 484 help 485 This driver supports all of Adaptec's I2O based RAID controllers as 486 well as the DPT SmartRaid V cards. This is an Adaptec maintained 487 driver by Deanna Bonds. See <file:Documentation/scsi/dpti.txt>. 488 489 To compile this driver as a module, choose M here: the 490 module will be called dpt_i2o. 491 492config SCSI_ADVANSYS 493 tristate "AdvanSys SCSI support" 494 depends on SCSI 495 depends on ISA || EISA || PCI 496 depends on ISA_DMA_API || !ISA 497 help 498 This is a driver for all SCSI host adapters manufactured by 499 AdvanSys. It is documented in the kernel source in 500 <file:drivers/scsi/advansys.c>. 501 502 To compile this driver as a module, choose M here: the 503 module will be called advansys. 504 505config SCSI_ARCMSR 506 tristate "ARECA (ARC11xx/12xx/13xx/16xx) SATA/SAS RAID Host Adapter" 507 depends on PCI && SCSI 508 help 509 This driver supports all of ARECA's SATA/SAS RAID controller cards. 510 This is an ARECA-maintained driver by Erich Chen. 511 If you have any problems, please mail to: <erich@areca.com.tw>. 512 Areca supports Linux RAID config tools. 513 Please link <http://www.areca.com.tw> 514 515 To compile this driver as a module, choose M here: the 516 module will be called arcmsr (modprobe arcmsr). 517 518source "drivers/scsi/esas2r/Kconfig" 519source "drivers/scsi/megaraid/Kconfig.megaraid" 520source "drivers/scsi/mpt3sas/Kconfig" 521source "drivers/scsi/smartpqi/Kconfig" 522source "drivers/scsi/ufs/Kconfig" 523 524config SCSI_HPTIOP 525 tristate "HighPoint RocketRAID 3xxx/4xxx Controller support" 526 depends on SCSI && PCI 527 help 528 This option enables support for HighPoint RocketRAID 3xxx/4xxx 529 controllers. 530 531 To compile this driver as a module, choose M here; the module 532 will be called hptiop. If unsure, say N. 533 534config SCSI_BUSLOGIC 535 tristate "BusLogic SCSI support" 536 depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API && VIRT_TO_BUS 537 ---help--- 538 This is support for BusLogic MultiMaster and FlashPoint SCSI Host 539 Adapters. Consult the SCSI-HOWTO, available from 540 <http://www.tldp.org/docs.html#howto>, and the files 541 <file:Documentation/scsi/BusLogic.txt> and 542 <file:Documentation/scsi/FlashPoint.txt> for more information. 543 Note that support for FlashPoint is only available for 32-bit 544 x86 configurations. 545 546 To compile this driver as a module, choose M here: the 547 module will be called BusLogic. 548 549config SCSI_FLASHPOINT 550 bool "FlashPoint support" 551 depends on SCSI_BUSLOGIC && PCI 552 help 553 This option allows you to add FlashPoint support to the 554 BusLogic SCSI driver. The FlashPoint SCCB Manager code is 555 substantial, so users of MultiMaster Host Adapters may not 556 wish to include it. 557 558config VMWARE_PVSCSI 559 tristate "VMware PVSCSI driver support" 560 depends on PCI && SCSI && X86 561 help 562 This driver supports VMware's para virtualized SCSI HBA. 563 To compile this driver as a module, choose M here: the 564 module will be called vmw_pvscsi. 565 566config XEN_SCSI_FRONTEND 567 tristate "XEN SCSI frontend driver" 568 depends on SCSI && XEN 569 select XEN_XENBUS_FRONTEND 570 help 571 The XEN SCSI frontend driver allows the kernel to access SCSI Devices 572 within another guest OS (usually Dom0). 573 Only needed if the kernel is running in a XEN guest and generic 574 SCSI access to a device is needed. 575 576config HYPERV_STORAGE 577 tristate "Microsoft Hyper-V virtual storage driver" 578 depends on SCSI && HYPERV 579 depends on m || SCSI_FC_ATTRS != m 580 default HYPERV 581 help 582 Select this option to enable the Hyper-V virtual storage driver. 583 584config LIBFC 585 tristate "LibFC module" 586 depends on SCSI_FC_ATTRS 587 select CRC32 588 ---help--- 589 Fibre Channel library module 590 591config LIBFCOE 592 tristate "LibFCoE module" 593 depends on LIBFC 594 ---help--- 595 Library for Fibre Channel over Ethernet module 596 597config FCOE 598 tristate "FCoE module" 599 depends on PCI 600 depends on LIBFCOE 601 ---help--- 602 Fibre Channel over Ethernet module 603 604config FCOE_FNIC 605 tristate "Cisco FNIC Driver" 606 depends on PCI && X86 607 depends on LIBFCOE 608 help 609 This is support for the Cisco PCI-Express FCoE HBA. 610 611 To compile this driver as a module, choose M here and read 612 <file:Documentation/scsi/scsi.txt>. 613 The module will be called fnic. 614 615config SCSI_SNIC 616 tristate "Cisco SNIC Driver" 617 depends on PCI && SCSI 618 help 619 This is support for the Cisco PCI-Express SCSI HBA. 620 621 To compile this driver as a module, choose M here and read 622 <file:Documentation/scsi/scsi.txt>. 623 The module will be called snic. 624 625config SCSI_SNIC_DEBUG_FS 626 bool "Cisco SNIC Driver Debugfs Support" 627 depends on SCSI_SNIC && DEBUG_FS 628 help 629 This enables to list debugging information from SNIC Driver 630 available via debugfs file system 631 632config SCSI_DMX3191D 633 tristate "DMX3191D SCSI support" 634 depends on PCI && SCSI 635 select SCSI_SPI_ATTRS 636 help 637 This is support for Domex DMX3191D SCSI Host Adapters. 638 639 To compile this driver as a module, choose M here: the 640 module will be called dmx3191d. 641 642config SCSI_EATA 643 tristate "EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support" 644 depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API 645 ---help--- 646 This driver supports all EATA/DMA-compliant SCSI host adapters. DPT 647 ISA and all EISA I/O addresses are probed looking for the "EATA" 648 signature. The addresses of all the PCI SCSI controllers reported 649 by the PCI subsystem are probed as well. 650 651 You want to read the start of <file:drivers/scsi/eata.c> and the 652 SCSI-HOWTO, available from 653 <http://www.tldp.org/docs.html#howto>. 654 655 To compile this driver as a module, choose M here: the 656 module will be called eata. 657 658config SCSI_EATA_TAGGED_QUEUE 659 bool "enable tagged command queueing" 660 depends on SCSI_EATA 661 help 662 This is a feature of SCSI-2 which improves performance: the host 663 adapter can send several SCSI commands to a device's queue even if 664 previous commands haven't finished yet. 665 This is equivalent to the "eata=tc:y" boot option. 666 667config SCSI_EATA_LINKED_COMMANDS 668 bool "enable elevator sorting" 669 depends on SCSI_EATA 670 help 671 This option enables elevator sorting for all probed SCSI disks and 672 CD-ROMs. It definitely reduces the average seek distance when doing 673 random seeks, but this does not necessarily result in a noticeable 674 performance improvement: your mileage may vary... 675 This is equivalent to the "eata=lc:y" boot option. 676 677config SCSI_EATA_MAX_TAGS 678 int "maximum number of queued commands" 679 depends on SCSI_EATA 680 default "16" 681 help 682 This specifies how many SCSI commands can be maximally queued for 683 each probed SCSI device. You should reduce the default value of 16 684 only if you have disks with buggy or limited tagged command support. 685 Minimum is 2 and maximum is 62. This value is also the window size 686 used by the elevator sorting option above. The effective value used 687 by the driver for each probed SCSI device is reported at boot time. 688 This is equivalent to the "eata=mq:8" boot option. 689 690config SCSI_EATA_PIO 691 tristate "EATA-PIO (old DPT PM2001, PM2012A) support" 692 depends on (ISA || EISA || PCI) && SCSI && BROKEN 693 ---help--- 694 This driver supports all EATA-PIO protocol compliant SCSI Host 695 Adapters like the DPT PM2001 and the PM2012A. EATA-DMA compliant 696 host adapters could also use this driver but are discouraged from 697 doing so, since this driver only supports hard disks and lacks 698 numerous features. You might want to have a look at the SCSI-HOWTO, 699 available from <http://www.tldp.org/docs.html#howto>. 700 701 To compile this driver as a module, choose M here: the 702 module will be called eata_pio. 703 704config SCSI_FUTURE_DOMAIN 705 tristate "Future Domain 16xx SCSI/AHA-2920A support" 706 depends on (ISA || PCI) && SCSI 707 select CHECK_SIGNATURE 708 ---help--- 709 This is support for Future Domain's 16-bit SCSI host adapters 710 (TMC-1660/1680, TMC-1650/1670, TMC-3260, TMC-1610M/MER/MEX) and 711 other adapters based on the Future Domain chipsets (Quantum 712 ISA-200S, ISA-250MG; Adaptec AHA-2920A; and at least one IBM board). 713 It is explained in section 3.7 of the SCSI-HOWTO, available from 714 <http://www.tldp.org/docs.html#howto>. 715 716 NOTE: Newer Adaptec AHA-2920C boards use the Adaptec AIC-7850 chip 717 and should use the aic7xxx driver ("Adaptec AIC7xxx chipset SCSI 718 controller support"). This Future Domain driver works with the older 719 Adaptec AHA-2920A boards with a Future Domain chip on them. 720 721 To compile this driver as a module, choose M here: the 722 module will be called fdomain. 723 724config SCSI_GDTH 725 tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support" 726 depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API 727 ---help--- 728 Formerly called GDT SCSI Disk Array Controller Support. 729 730 This is a driver for RAID/SCSI Disk Array Controllers (EISA/ISA/PCI) 731 manufactured by Intel Corporation/ICP vortex GmbH. It is documented 732 in the kernel source in <file:drivers/scsi/gdth.c> and 733 <file:drivers/scsi/gdth.h>. 734 735 To compile this driver as a module, choose M here: the 736 module will be called gdth. 737 738config SCSI_ISCI 739 tristate "Intel(R) C600 Series Chipset SAS Controller" 740 depends on PCI && SCSI 741 depends on X86 742 select SCSI_SAS_LIBSAS 743 ---help--- 744 This driver supports the 6Gb/s SAS capabilities of the storage 745 control unit found in the Intel(R) C600 series chipset. 746 747config SCSI_GENERIC_NCR5380 748 tristate "Generic NCR5380/53c400 SCSI ISA card support" 749 depends on ISA && SCSI && HAS_IOPORT_MAP 750 select SCSI_SPI_ATTRS 751 ---help--- 752 This is a driver for old ISA card SCSI controllers based on a 753 NCR 5380, 53C80, 53C400, 53C400A, or DTC 436 device. 754 Most boards such as the Trantor T130 fit this category, as do 755 various 8-bit and 16-bit ISA cards bundled with SCSI scanners. 756 757 To compile this driver as a module, choose M here: the 758 module will be called g_NCR5380. 759 760config SCSI_IPS 761 tristate "IBM ServeRAID support" 762 depends on PCI && SCSI 763 ---help--- 764 This is support for the IBM ServeRAID hardware RAID controllers. 765 See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html> 766 and <http://www-947.ibm.com/support/entry/portal/docdisplay?brand=5000008&lndocid=SERV-RAID> 767 for more information. If this driver does not work correctly 768 without modification please contact the author by email at 769 <ipslinux@adaptec.com>. 770 771 To compile this driver as a module, choose M here: the 772 module will be called ips. 773 774config SCSI_IBMVSCSI 775 tristate "IBM Virtual SCSI support" 776 depends on PPC_PSERIES 777 select SCSI_SRP_ATTRS 778 help 779 This is the IBM POWER Virtual SCSI Client 780 781 To compile this driver as a module, choose M here: the 782 module will be called ibmvscsi. 783 784config SCSI_IBMVSCSIS 785 tristate "IBM Virtual SCSI Server support" 786 depends on PPC_PSERIES && TARGET_CORE && SCSI && PCI 787 help 788 This is the IBM POWER Virtual SCSI Target Server 789 This driver uses the SRP protocol for communication betwen servers 790 guest and/or the host that run on the same server. 791 More information on VSCSI protocol can be found at www.power.org 792 793 The userspace configuration needed to initialize the driver can be 794 be found here: 795 796 https://github.com/powervm/ibmvscsis/wiki/Configuration 797 798 To compile this driver as a module, choose M here: the 799 module will be called ibmvscsis. 800 801config SCSI_IBMVFC 802 tristate "IBM Virtual FC support" 803 depends on PPC_PSERIES && SCSI 804 depends on SCSI_FC_ATTRS 805 help 806 This is the IBM POWER Virtual FC Client 807 808 To compile this driver as a module, choose M here: the 809 module will be called ibmvfc. 810 811config SCSI_IBMVFC_TRACE 812 bool "enable driver internal trace" 813 depends on SCSI_IBMVFC 814 default y 815 help 816 If you say Y here, the driver will trace all commands issued 817 to the adapter. Performance impact is minimal. Trace can be 818 dumped using /sys/class/scsi_host/hostXX/trace. 819 820config SCSI_INITIO 821 tristate "Initio 9100U(W) support" 822 depends on PCI && SCSI 823 help 824 This is support for the Initio 91XXU(W) SCSI host adapter. Please 825 read the SCSI-HOWTO, available from 826 <http://www.tldp.org/docs.html#howto>. 827 828 To compile this driver as a module, choose M here: the 829 module will be called initio. 830 831config SCSI_INIA100 832 tristate "Initio INI-A100U2W support" 833 depends on PCI && SCSI 834 help 835 This is support for the Initio INI-A100U2W SCSI host adapter. 836 Please read the SCSI-HOWTO, available from 837 <http://www.tldp.org/docs.html#howto>. 838 839 To compile this driver as a module, choose M here: the 840 module will be called a100u2w. 841 842config SCSI_PPA 843 tristate "IOMEGA parallel port (ppa - older drives)" 844 depends on SCSI && PARPORT_PC 845 ---help--- 846 This driver supports older versions of IOMEGA's parallel port ZIP 847 drive (a 100 MB removable media device). 848 849 Note that you can say N here if you have the SCSI version of the ZIP 850 drive: it will be supported automatically if you said Y to the 851 generic "SCSI disk support", above. 852 853 If you have the ZIP Plus drive or a more recent parallel port ZIP 854 drive (if the supplied cable with the drive is labeled "AutoDetect") 855 then you should say N here and Y to "IOMEGA parallel port (imm - 856 newer drives)", below. 857 858 For more information about this driver and how to use it you should 859 read the file <file:Documentation/scsi/ppa.txt>. You should also read 860 the SCSI-HOWTO, which is available from 861 <http://www.tldp.org/docs.html#howto>. If you use this driver, 862 you will still be able to use the parallel port for other tasks, 863 such as a printer; it is safe to compile both drivers into the 864 kernel. 865 866 To compile this driver as a module, choose M here: the 867 module will be called ppa. 868 869config SCSI_IMM 870 tristate "IOMEGA parallel port (imm - newer drives)" 871 depends on SCSI && PARPORT_PC 872 ---help--- 873 This driver supports newer versions of IOMEGA's parallel port ZIP 874 drive (a 100 MB removable media device). 875 876 Note that you can say N here if you have the SCSI version of the ZIP 877 drive: it will be supported automatically if you said Y to the 878 generic "SCSI disk support", above. 879 880 If you have the ZIP Plus drive or a more recent parallel port ZIP 881 drive (if the supplied cable with the drive is labeled "AutoDetect") 882 then you should say Y here; if you have an older ZIP drive, say N 883 here and Y to "IOMEGA Parallel Port (ppa - older drives)", above. 884 885 For more information about this driver and how to use it you should 886 read the file <file:Documentation/scsi/ppa.txt>. You should also read 887 the SCSI-HOWTO, which is available from 888 <http://www.tldp.org/docs.html#howto>. If you use this driver, 889 you will still be able to use the parallel port for other tasks, 890 such as a printer; it is safe to compile both drivers into the 891 kernel. 892 893 To compile this driver as a module, choose M here: the 894 module will be called imm. 895 896config SCSI_IZIP_EPP16 897 bool "ppa/imm option - Use slow (but safe) EPP-16" 898 depends on SCSI_PPA || SCSI_IMM 899 ---help--- 900 EPP (Enhanced Parallel Port) is a standard for parallel ports which 901 allows them to act as expansion buses that can handle up to 64 902 peripheral devices. 903 904 Some parallel port chipsets are slower than their motherboard, and 905 so we have to control the state of the chipset's FIFO queue every 906 now and then to avoid data loss. This will be done if you say Y 907 here. 908 909 Generally, saying Y is the safe option and slows things down a bit. 910 911config SCSI_IZIP_SLOW_CTR 912 bool "ppa/imm option - Assume slow parport control register" 913 depends on SCSI_PPA || SCSI_IMM 914 help 915 Some parallel ports are known to have excessive delays between 916 changing the parallel port control register and good data being 917 available on the parallel port data/status register. This option 918 forces a small delay (1.0 usec to be exact) after changing the 919 control register to let things settle out. Enabling this option may 920 result in a big drop in performance but some very old parallel ports 921 (found in 386 vintage machines) will not work properly. 922 923 Generally, saying N is fine. 924 925config SCSI_NCR53C406A 926 tristate "NCR53c406a SCSI support" 927 depends on ISA && SCSI 928 help 929 This is support for the NCR53c406a SCSI host adapter. For user 930 configurable parameters, check out <file:drivers/scsi/NCR53c406a.c> 931 in the kernel source. Also read the SCSI-HOWTO, available from 932 <http://www.tldp.org/docs.html#howto>. 933 934 To compile this driver as a module, choose M here: the 935 module will be called NCR53c406. 936 937config SCSI_NCR_D700 938 tristate "NCR Dual 700 MCA SCSI support" 939 depends on MCA && SCSI 940 select SCSI_SPI_ATTRS 941 help 942 This is a driver for the MicroChannel Dual 700 card produced by 943 NCR and commonly used in 345x/35xx/4100 class machines. It always 944 tries to negotiate sync and uses tag command queueing. 945 946 Unless you have an NCR manufactured machine, the chances are that 947 you do not have this SCSI card, so say N. 948 949config SCSI_LASI700 950 tristate "HP Lasi SCSI support for 53c700/710" 951 depends on GSC && SCSI 952 select SCSI_SPI_ATTRS 953 help 954 This is a driver for the SCSI controller in the Lasi chip found in 955 many PA-RISC workstations & servers. If you do not know whether you 956 have a Lasi chip, it is safe to say "Y" here. 957 958config SCSI_SNI_53C710 959 tristate "SNI RM SCSI support for 53c710" 960 depends on SNI_RM && SCSI 961 select SCSI_SPI_ATTRS 962 select 53C700_LE_ON_BE 963 help 964 This is a driver for the onboard SCSI controller found in older 965 SNI RM workstations & servers. 966 967config 53C700_LE_ON_BE 968 bool 969 depends on SCSI_LASI700 970 default y 971 972config SCSI_STEX 973 tristate "Promise SuperTrak EX Series support" 974 depends on PCI && SCSI 975 ---help--- 976 This driver supports Promise SuperTrak EX series storage controllers. 977 978 Promise provides Linux RAID configuration utility for these 979 controllers. Please visit <http://www.promise.com> to download. 980 981 To compile this driver as a module, choose M here: the 982 module will be called stex. 983 984config 53C700_BE_BUS 985 bool 986 depends on SCSI_A4000T || SCSI_ZORRO7XX || MVME16x_SCSI || BVME6000_SCSI 987 default y 988 989config SCSI_SYM53C8XX_2 990 tristate "SYM53C8XX Version 2 SCSI support" 991 depends on PCI && SCSI 992 select SCSI_SPI_ATTRS 993 ---help--- 994 This driver supports the whole NCR53C8XX/SYM53C8XX family of 995 PCI-SCSI controllers. It also supports the subset of LSI53C10XX 996 Ultra-160 controllers that are based on the SYM53C8XX SCRIPTS 997 language. It does not support LSI53C10XX Ultra-320 PCI-X SCSI 998 controllers; you need to use the Fusion MPT driver for that. 999 1000 Please read <file:Documentation/scsi/sym53c8xx_2.txt> for more 1001 information. 1002 1003config SCSI_SYM53C8XX_DMA_ADDRESSING_MODE 1004 int "DMA addressing mode" 1005 depends on SCSI_SYM53C8XX_2 1006 default "1" 1007 ---help--- 1008 This option only applies to PCI-SCSI chips that are PCI DAC 1009 capable (875A, 895A, 896, 1010-33, 1010-66, 1000). 1010 1011 When set to 0, the driver will program the chip to only perform 1012 32-bit DMA. When set to 1, the chip will be able to perform DMA 1013 to addresses up to 1TB. When set to 2, the driver supports the 1014 full 64-bit DMA address range, but can only address 16 segments 1015 of 4 GB each. This limits the total addressable range to 64 GB. 1016 1017 Most machines with less than 4GB of memory should use a setting 1018 of 0 for best performance. If your machine has 4GB of memory 1019 or more, you should set this option to 1 (the default). 1020 1021 The still experimental value 2 (64 bit DMA addressing with 16 1022 x 4GB segments limitation) can be used on systems that require 1023 PCI address bits past bit 39 to be set for the addressing of 1024 memory using PCI DAC cycles. 1025 1026config SCSI_SYM53C8XX_DEFAULT_TAGS 1027 int "Default tagged command queue depth" 1028 depends on SCSI_SYM53C8XX_2 1029 default "16" 1030 help 1031 This is the default value of the command queue depth the 1032 driver will announce to the generic SCSI layer for devices 1033 that support tagged command queueing. This value can be changed 1034 from the boot command line. This is a soft limit that cannot 1035 exceed CONFIG_SCSI_SYM53C8XX_MAX_TAGS. 1036 1037config SCSI_SYM53C8XX_MAX_TAGS 1038 int "Maximum number of queued commands" 1039 depends on SCSI_SYM53C8XX_2 1040 default "64" 1041 help 1042 This option allows you to specify the maximum number of commands 1043 that can be queued to any device, when tagged command queuing is 1044 possible. The driver supports up to 256 queued commands per device. 1045 This value is used as a compiled-in hard limit. 1046 1047config SCSI_SYM53C8XX_MMIO 1048 bool "Use memory mapped IO" 1049 depends on SCSI_SYM53C8XX_2 1050 default y 1051 help 1052 Memory mapped IO is faster than Port IO. Most people should 1053 answer Y here, but some machines may have problems. If you have 1054 to answer N here, please report the problem to the maintainer. 1055 1056config SCSI_IPR 1057 tristate "IBM Power Linux RAID adapter support" 1058 depends on PCI && SCSI && ATA 1059 select FW_LOADER 1060 select IRQ_POLL 1061 ---help--- 1062 This driver supports the IBM Power Linux family RAID adapters. 1063 This includes IBM pSeries 5712, 5703, 5709, and 570A, as well 1064 as IBM iSeries 5702, 5703, 5709, and 570A. 1065 1066config SCSI_IPR_TRACE 1067 bool "enable driver internal trace" 1068 depends on SCSI_IPR 1069 default y 1070 help 1071 If you say Y here, the driver will trace all commands issued 1072 to the adapter. Performance impact is minimal. Trace can be 1073 dumped using /sys/bus/class/scsi_host/hostXX/trace. 1074 1075config SCSI_IPR_DUMP 1076 bool "enable adapter dump support" 1077 depends on SCSI_IPR 1078 default y 1079 help 1080 If you say Y here, the driver will support adapter crash dump. 1081 If you enable this support, the iprdump daemon can be used 1082 to capture adapter failure analysis information. 1083 1084config SCSI_ZALON 1085 tristate "Zalon SCSI support" 1086 depends on GSC && SCSI 1087 select SCSI_SPI_ATTRS 1088 help 1089 The Zalon is a GSC/HSC bus interface chip that sits between the 1090 PA-RISC processor and the NCR 53c720 SCSI controller on C100, 1091 C110, J200, J210 and some D, K & R-class machines. It's also 1092 used on the add-in Bluefish, Barracuda & Shrike SCSI cards. 1093 Say Y here if you have one of these machines or cards. 1094 1095config SCSI_NCR_Q720 1096 tristate "NCR Quad 720 MCA SCSI support" 1097 depends on MCA && SCSI 1098 select SCSI_SPI_ATTRS 1099 help 1100 This is a driver for the MicroChannel Quad 720 card produced by 1101 NCR and commonly used in 345x/35xx/4100 class machines. It always 1102 tries to negotiate sync and uses tag command queueing. 1103 1104 Unless you have an NCR manufactured machine, the chances are that 1105 you do not have this SCSI card, so say N. 1106 1107config SCSI_NCR53C8XX_DEFAULT_TAGS 1108 int "default tagged command queue depth" 1109 depends on SCSI_ZALON || SCSI_NCR_Q720 1110 default "8" 1111 ---help--- 1112 "Tagged command queuing" is a feature of SCSI-2 which improves 1113 performance: the host adapter can send several SCSI commands to a 1114 device's queue even if previous commands haven't finished yet. 1115 Because the device is intelligent, it can optimize its operations 1116 (like head positioning) based on its own request queue. Some SCSI 1117 devices don't implement this properly; if you want to disable this 1118 feature, enter 0 or 1 here (it doesn't matter which). 1119 1120 The default value is 8 and should be supported by most hard disks. 1121 This value can be overridden from the boot command line using the 1122 'tags' option as follows (example): 1123 'ncr53c8xx=tags:4/t2t3q16/t0u2q10' will set default queue depth to 1124 4, set queue depth to 16 for target 2 and target 3 on controller 0 1125 and set queue depth to 10 for target 0 / lun 2 on controller 1. 1126 1127 The normal answer therefore is to go with the default 8 and to use 1128 a boot command line option for devices that need to use a different 1129 command queue depth. 1130 1131 There is no safe option other than using good SCSI devices. 1132 1133config SCSI_NCR53C8XX_MAX_TAGS 1134 int "maximum number of queued commands" 1135 depends on SCSI_ZALON || SCSI_NCR_Q720 1136 default "32" 1137 ---help--- 1138 This option allows you to specify the maximum number of commands 1139 that can be queued to any device, when tagged command queuing is 1140 possible. The default value is 32. Minimum is 2, maximum is 64. 1141 Modern hard disks are able to support 64 tags and even more, but 1142 do not seem to be faster when more than 32 tags are being used. 1143 1144 So, the normal answer here is to go with the default value 32 unless 1145 you are using very large hard disks with large cache (>= 1 MB) that 1146 are able to take advantage of more than 32 tagged commands. 1147 1148 There is no safe option and the default answer is recommended. 1149 1150config SCSI_NCR53C8XX_SYNC 1151 int "synchronous transfers frequency in MHz" 1152 depends on SCSI_ZALON || SCSI_NCR_Q720 1153 default "20" 1154 ---help--- 1155 The SCSI Parallel Interface-2 Standard defines 5 classes of transfer 1156 rates: FAST-5, FAST-10, FAST-20, FAST-40 and FAST-80. The numbers 1157 are respectively the maximum data transfer rates in mega-transfers 1158 per second for each class. For example, a FAST-20 Wide 16 device is 1159 able to transfer data at 20 million 16 bit packets per second for a 1160 total rate of 40 MB/s. 1161 1162 You may specify 0 if you want to only use asynchronous data 1163 transfers. This is the safest and slowest option. Otherwise, specify 1164 a value between 5 and 80, depending on the capability of your SCSI 1165 controller. The higher the number, the faster the data transfer. 1166 Note that 80 should normally be ok since the driver decreases the 1167 value automatically according to the controller's capabilities. 1168 1169 Your answer to this question is ignored for controllers with NVRAM, 1170 since the driver will get this information from the user set-up. It 1171 also can be overridden using a boot setup option, as follows 1172 (example): 'ncr53c8xx=sync:12' will allow the driver to negotiate 1173 for FAST-20 synchronous data transfer (20 mega-transfers per 1174 second). 1175 1176 The normal answer therefore is not to go with the default but to 1177 select the maximum value 80 allowing the driver to use the maximum 1178 value supported by each controller. If this causes problems with 1179 your SCSI devices, you should come back and decrease the value. 1180 1181 There is no safe option other than using good cabling, right 1182 terminations and SCSI conformant devices. 1183 1184config SCSI_NCR53C8XX_NO_DISCONNECT 1185 bool "not allow targets to disconnect" 1186 depends on (SCSI_ZALON || SCSI_NCR_Q720) && SCSI_NCR53C8XX_DEFAULT_TAGS=0 1187 help 1188 This option is only provided for safety if you suspect some SCSI 1189 device of yours to not support properly the target-disconnect 1190 feature. In that case, you would say Y here. In general however, to 1191 not allow targets to disconnect is not reasonable if there is more 1192 than 1 device on a SCSI bus. The normal answer therefore is N. 1193 1194config SCSI_QLOGIC_FAS 1195 tristate "Qlogic FAS SCSI support" 1196 depends on ISA && SCSI 1197 ---help--- 1198 This is a driver for the ISA, VLB, and PCMCIA versions of the Qlogic 1199 FastSCSI! cards as well as any other card based on the FASXX chip 1200 (including the Control Concepts SCSI/IDE/SIO/PIO/FDC cards). 1201 1202 This driver does NOT support the PCI versions of these cards. The 1203 PCI versions are supported by the Qlogic ISP driver ("Qlogic ISP 1204 SCSI support"), below. 1205 1206 Information about this driver is contained in 1207 <file:Documentation/scsi/qlogicfas.txt>. You should also read the 1208 SCSI-HOWTO, available from 1209 <http://www.tldp.org/docs.html#howto>. 1210 1211 To compile this driver as a module, choose M here: the 1212 module will be called qlogicfas. 1213 1214config SCSI_QLOGIC_1280 1215 tristate "Qlogic QLA 1240/1x80/1x160 SCSI support" 1216 depends on PCI && SCSI 1217 help 1218 Say Y if you have a QLogic ISP1240/1x80/1x160 SCSI host adapter. 1219 1220 To compile this driver as a module, choose M here: the 1221 module will be called qla1280. 1222 1223config SCSI_QLOGICPTI 1224 tristate "PTI Qlogic, ISP Driver" 1225 depends on SBUS && SCSI 1226 help 1227 This driver supports SBUS SCSI controllers from PTI or QLogic. These 1228 controllers are known under Solaris as qpti and in the openprom as 1229 PTI,ptisp or QLGC,isp. Note that PCI QLogic SCSI controllers are 1230 driven by a different driver. 1231 1232 To compile this driver as a module, choose M here: the 1233 module will be called qlogicpti. 1234 1235source "drivers/scsi/qla2xxx/Kconfig" 1236source "drivers/scsi/qla4xxx/Kconfig" 1237source "drivers/scsi/qedi/Kconfig" 1238source "drivers/scsi/qedf/Kconfig" 1239 1240config SCSI_LPFC 1241 tristate "Emulex LightPulse Fibre Channel Support" 1242 depends on PCI && SCSI 1243 depends on SCSI_FC_ATTRS 1244 depends on NVME_TARGET_FC || NVME_TARGET_FC=n 1245 depends on NVME_FC || NVME_FC=n 1246 select CRC_T10DIF 1247 ---help--- 1248 This lpfc driver supports the Emulex LightPulse 1249 Family of Fibre Channel PCI host adapters. 1250 1251config SCSI_LPFC_DEBUG_FS 1252 bool "Emulex LightPulse Fibre Channel debugfs Support" 1253 depends on SCSI_LPFC && DEBUG_FS 1254 ---help--- 1255 This makes debugging information from the lpfc driver 1256 available via the debugfs filesystem. 1257 1258config SCSI_SIM710 1259 tristate "Simple 53c710 SCSI support (Compaq, NCR machines)" 1260 depends on (EISA || MCA) && SCSI 1261 select SCSI_SPI_ATTRS 1262 ---help--- 1263 This driver is for NCR53c710 based SCSI host adapters. 1264 1265 It currently supports Compaq EISA cards and NCR MCA cards 1266 1267config SCSI_SYM53C416 1268 tristate "Symbios 53c416 SCSI support" 1269 depends on ISA && SCSI 1270 ---help--- 1271 This is support for the sym53c416 SCSI host adapter, the SCSI 1272 adapter that comes with some HP scanners. This driver requires that 1273 the sym53c416 is configured first using some sort of PnP 1274 configuration program (e.g. isapnp) or by a PnP aware BIOS. If you 1275 are using isapnp then you need to compile this driver as a module 1276 and then load it using insmod after isapnp has run. The parameters 1277 of the configured card(s) should be passed to the driver. The format 1278 is: 1279 1280 insmod sym53c416 sym53c416=<base>,<irq> [sym53c416_1=<base>,<irq>] 1281 1282 To compile this driver as a module, choose M here: the 1283 module will be called sym53c416. 1284 1285config SCSI_DC395x 1286 tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support" 1287 depends on PCI && SCSI 1288 ---help--- 1289 This driver supports PCI SCSI host adapters based on the ASIC 1290 TRM-S1040 chip, e.g Tekram DC395(U/UW/F) and DC315(U) variants. 1291 1292 This driver works, but is still in experimental status. So better 1293 have a bootable disk and a backup in case of emergency. 1294 1295 Documentation can be found in <file:Documentation/scsi/dc395x.txt>. 1296 1297 To compile this driver as a module, choose M here: the 1298 module will be called dc395x. 1299 1300config SCSI_AM53C974 1301 tristate "Tekram DC390(T) and Am53/79C974 SCSI support (new driver)" 1302 depends on PCI && SCSI 1303 select SCSI_SPI_ATTRS 1304 ---help--- 1305 This driver supports PCI SCSI host adapters based on the Am53C974A 1306 chip, e.g. Tekram DC390(T), DawiControl 2974 and some onboard 1307 PCscsi/PCnet (Am53/79C974) solutions. 1308 This is a new implementation base on the generic esp_scsi driver. 1309 1310 Documentation can be found in <file:Documentation/scsi/tmscsim.txt>. 1311 1312 Note that this driver does NOT support Tekram DC390W/U/F, which are 1313 based on NCR/Symbios chips. Use "NCR53C8XX SCSI support" for those. 1314 1315 To compile this driver as a module, choose M here: the 1316 module will be called am53c974. 1317 1318config SCSI_NSP32 1319 tristate "Workbit NinjaSCSI-32Bi/UDE support" 1320 depends on PCI && SCSI && !64BIT 1321 help 1322 This is support for the Workbit NinjaSCSI-32Bi/UDE PCI/Cardbus 1323 SCSI host adapter. Please read the SCSI-HOWTO, available from 1324 <http://www.tldp.org/docs.html#howto>. 1325 1326 To compile this driver as a module, choose M here: the 1327 module will be called nsp32. 1328 1329config SCSI_WD719X 1330 tristate "Western Digital WD7193/7197/7296 support" 1331 depends on PCI && SCSI 1332 select EEPROM_93CX6 1333 ---help--- 1334 This is a driver for Western Digital WD7193, WD7197 and WD7296 PCI 1335 SCSI controllers (based on WD33C296A chip). 1336 1337config SCSI_DEBUG 1338 tristate "SCSI debugging host and device simulator" 1339 depends on SCSI 1340 select CRC_T10DIF 1341 help 1342 This pseudo driver simulates one or more hosts (SCSI initiators), 1343 each with one or more targets, each with one or more logical units. 1344 Defaults to one of each, creating a small RAM disk device. Many 1345 parameters found in the /sys/bus/pseudo/drivers/scsi_debug 1346 directory can be tweaked at run time. 1347 See <http://sg.danny.cz/sg/sdebug26.html> for more information. 1348 Mainly used for testing and best as a module. If unsure, say N. 1349 1350config SCSI_MESH 1351 tristate "MESH (Power Mac internal SCSI) support" 1352 depends on PPC32 && PPC_PMAC && SCSI 1353 help 1354 Many Power Macintoshes and clones have a MESH (Macintosh Enhanced 1355 SCSI Hardware) SCSI bus adaptor (the 7200 doesn't, but all of the 1356 other Power Macintoshes do). Say Y to include support for this SCSI 1357 adaptor. 1358 1359 To compile this driver as a module, choose M here: the 1360 module will be called mesh. 1361 1362config SCSI_MESH_SYNC_RATE 1363 int "maximum synchronous transfer rate (MB/s) (0 = async)" 1364 depends on SCSI_MESH 1365 default "5" 1366 help 1367 On Power Macintoshes (and clones) where the MESH SCSI bus adaptor 1368 drives a bus which is entirely internal to the machine (such as the 1369 7500, 7600, 8500, etc.), the MESH is capable of synchronous 1370 operation at up to 10 MB/s. On machines where the SCSI bus 1371 controlled by the MESH can have external devices connected, it is 1372 usually rated at 5 MB/s. 5 is a safe value here unless you know the 1373 MESH SCSI bus is internal only; in that case you can say 10. Say 0 1374 to disable synchronous operation. 1375 1376config SCSI_MESH_RESET_DELAY_MS 1377 int "initial bus reset delay (ms) (0 = no reset)" 1378 depends on SCSI_MESH 1379 default "4000" 1380 1381config SCSI_MAC53C94 1382 tristate "53C94 (Power Mac external SCSI) support" 1383 depends on PPC32 && PPC_PMAC && SCSI 1384 help 1385 On Power Macintoshes (and clones) with two SCSI buses, the external 1386 SCSI bus is usually controlled by a 53C94 SCSI bus adaptor. Older 1387 machines which only have one SCSI bus, such as the 7200, also use 1388 the 53C94. Say Y to include support for the 53C94. 1389 1390 To compile this driver as a module, choose M here: the 1391 module will be called mac53c94. 1392 1393source "drivers/scsi/arm/Kconfig" 1394 1395config JAZZ_ESP 1396 bool "MIPS JAZZ FAS216 SCSI support" 1397 depends on MACH_JAZZ && SCSI 1398 select SCSI_SPI_ATTRS 1399 help 1400 This is the driver for the onboard SCSI host adapter of MIPS Magnum 1401 4000, Acer PICA, Olivetti M700-10 and a few other identical OEM 1402 systems. 1403 1404config A3000_SCSI 1405 tristate "A3000 WD33C93A support" 1406 depends on AMIGA && SCSI 1407 help 1408 If you have an Amiga 3000 and have SCSI devices connected to the 1409 built-in SCSI controller, say Y. Otherwise, say N. 1410 1411 To compile this driver as a module, choose M here: the 1412 module will be called a3000. 1413 1414config A2091_SCSI 1415 tristate "A2091/A590 WD33C93A support" 1416 depends on ZORRO && SCSI 1417 help 1418 If you have a Commodore A2091 SCSI controller, say Y. Otherwise, 1419 say N. 1420 1421 To compile this driver as a module, choose M here: the 1422 module will be called a2091. 1423 1424config GVP11_SCSI 1425 tristate "GVP Series II WD33C93A support" 1426 depends on ZORRO && SCSI 1427 ---help--- 1428 If you have a Great Valley Products Series II SCSI controller, 1429 answer Y. Also say Y if you have a later model of GVP SCSI 1430 controller (such as the GVP A4008 or a Combo board). Otherwise, 1431 answer N. This driver does NOT work for the T-Rex series of 1432 accelerators from TekMagic and GVP-M. 1433 1434 To compile this driver as a module, choose M here: the 1435 module will be called gvp11. 1436 1437config SCSI_A4000T 1438 tristate "A4000T NCR53c710 SCSI support" 1439 depends on AMIGA && SCSI 1440 select SCSI_SPI_ATTRS 1441 help 1442 If you have an Amiga 4000T and have SCSI devices connected to the 1443 built-in SCSI controller, say Y. Otherwise, say N. 1444 1445 To compile this driver as a module, choose M here: the 1446 module will be called a4000t. 1447 1448config SCSI_ZORRO7XX 1449 tristate "Zorro NCR53c710 SCSI support" 1450 depends on ZORRO && SCSI 1451 select SCSI_SPI_ATTRS 1452 help 1453 Support for various NCR53c710-based SCSI controllers on Zorro 1454 expansion boards for the Amiga. 1455 This includes: 1456 - the Amiga 4091 Zorro III SCSI-2 controller, 1457 - the MacroSystem Development's WarpEngine Amiga SCSI-2 controller 1458 (info at 1459 <http://www.lysator.liu.se/amiga/ar/guide/ar310.guide?FEATURE5>), 1460 - the SCSI controller on the Phase5 Blizzard PowerUP 603e+ 1461 accelerator card for the Amiga 1200, 1462 - the SCSI controller on the GVP Turbo 040/060 accelerator. 1463 1464config ATARI_SCSI 1465 tristate "Atari native SCSI support" 1466 depends on ATARI && SCSI 1467 select SCSI_SPI_ATTRS 1468 select NVRAM 1469 ---help--- 1470 If you have an Atari with built-in NCR5380 SCSI controller (TT, 1471 Falcon, ...) say Y to get it supported. Of course also, if you have 1472 a compatible SCSI controller (e.g. for Medusa). 1473 1474 To compile this driver as a module, choose M here: the 1475 module will be called atari_scsi. 1476 1477 This driver supports both styles of NCR integration into the 1478 system: the TT style (separate DMA), and the Falcon style (via 1479 ST-DMA, replacing ACSI). It does NOT support other schemes, like 1480 in the Hades (without DMA). 1481 1482config MAC_SCSI 1483 tristate "Macintosh NCR5380 SCSI" 1484 depends on MAC && SCSI 1485 select SCSI_SPI_ATTRS 1486 help 1487 This is the NCR 5380 SCSI controller included on most of the 68030 1488 based Macintoshes. If you have one of these say Y and read the 1489 SCSI-HOWTO, available from 1490 <http://www.tldp.org/docs.html#howto>. 1491 1492config SCSI_MAC_ESP 1493 tristate "Macintosh NCR53c9[46] SCSI" 1494 depends on MAC && SCSI 1495 select SCSI_SPI_ATTRS 1496 help 1497 This is the NCR 53c9x SCSI controller found on most of the 68040 1498 based Macintoshes. 1499 1500 To compile this driver as a module, choose M here: the module 1501 will be called mac_esp. 1502 1503config MVME147_SCSI 1504 bool "WD33C93 SCSI driver for MVME147" 1505 depends on MVME147 && SCSI=y 1506 select SCSI_SPI_ATTRS 1507 help 1508 Support for the on-board SCSI controller on the Motorola MVME147 1509 single-board computer. 1510 1511config MVME16x_SCSI 1512 tristate "NCR53C710 SCSI driver for MVME16x" 1513 depends on MVME16x && SCSI 1514 select SCSI_SPI_ATTRS 1515 help 1516 The Motorola MVME162, 166, 167, 172 and 177 boards use the NCR53C710 1517 SCSI controller chip. Almost everyone using one of these boards 1518 will want to say Y to this question. 1519 1520config BVME6000_SCSI 1521 tristate "NCR53C710 SCSI driver for BVME6000" 1522 depends on BVME6000 && SCSI 1523 select SCSI_SPI_ATTRS 1524 help 1525 The BVME4000 and BVME6000 boards from BVM Ltd use the NCR53C710 1526 SCSI controller chip. Almost everyone using one of these boards 1527 will want to say Y to this question. 1528 1529config SUN3_SCSI 1530 tristate "Sun3 NCR5380 SCSI" 1531 depends on SUN3 && SCSI 1532 select SCSI_SPI_ATTRS 1533 help 1534 This option will enable support for the OBIO (onboard io) NCR5380 1535 SCSI controller found in the Sun 3/50 and 3/60, as well as for 1536 "Sun3" type VME scsi controllers also based on the NCR5380. 1537 General Linux information on the Sun 3 series (now discontinued) 1538 is at <http://www.angelfire.com/ca2/tech68k/sun3.html>. 1539 1540config SUN3X_ESP 1541 bool "Sun3x ESP SCSI" 1542 depends on SUN3X && SCSI=y 1543 select SCSI_SPI_ATTRS 1544 help 1545 The ESP was an on-board SCSI controller used on Sun 3/80 1546 machines. Say Y here to compile in support for it. 1547 1548config SCSI_SUNESP 1549 tristate "Sparc ESP Scsi Driver" 1550 depends on SBUS && SCSI 1551 select SCSI_SPI_ATTRS 1552 help 1553 This is the driver for the Sun ESP SCSI host adapter. The ESP 1554 chipset is present in most SPARC SBUS-based computers and 1555 supports the Emulex family of ESP SCSI chips (esp100, esp100A, 1556 esp236, fas101, fas236) as well as the Qlogic fas366 SCSI chip. 1557 1558 To compile this driver as a module, choose M here: the 1559 module will be called sun_esp. 1560 1561config ZFCP 1562 tristate "FCP host bus adapter driver for IBM eServer zSeries" 1563 depends on S390 && QDIO && SCSI 1564 depends on SCSI_FC_ATTRS 1565 help 1566 If you want to access SCSI devices attached to your IBM eServer 1567 zSeries by means of Fibre Channel interfaces say Y. 1568 For details please refer to the documentation provided by IBM at 1569 <http://oss.software.ibm.com/developerworks/opensource/linux390> 1570 1571 This driver is also available as a module. This module will be 1572 called zfcp. If you want to compile it as a module, say M here 1573 and read <file:Documentation/kbuild/modules.txt>. 1574 1575config SCSI_PMCRAID 1576 tristate "PMC SIERRA Linux MaxRAID adapter support" 1577 depends on PCI && SCSI && NET 1578 ---help--- 1579 This driver supports the PMC SIERRA MaxRAID adapters. 1580 1581config SCSI_PM8001 1582 tristate "PMC-Sierra SPC 8001 SAS/SATA Based Host Adapter driver" 1583 depends on PCI && SCSI 1584 select SCSI_SAS_LIBSAS 1585 help 1586 This driver supports PMC-Sierra PCIE SAS/SATA 8x6G SPC 8001 chip 1587 based host adapters. 1588 1589config SCSI_BFA_FC 1590 tristate "Brocade BFA Fibre Channel Support" 1591 depends on PCI && SCSI 1592 depends on SCSI_FC_ATTRS 1593 help 1594 This bfa driver supports all Brocade PCIe FC/FCOE host adapters. 1595 1596 To compile this driver as a module, choose M here. The module will 1597 be called bfa. 1598 1599config SCSI_VIRTIO 1600 tristate "virtio-scsi support" 1601 depends on VIRTIO 1602 help 1603 This is the virtual HBA driver for virtio. If the kernel will 1604 be used in a virtual machine, say Y or M. 1605 1606source "drivers/scsi/csiostor/Kconfig" 1607 1608endif # SCSI_LOWLEVEL 1609 1610source "drivers/scsi/pcmcia/Kconfig" 1611 1612source "drivers/scsi/device_handler/Kconfig" 1613 1614source "drivers/scsi/osd/Kconfig" 1615 1616endmenu 1617