1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* -*- mode: c; c-basic-offset: 8 -*- */ 3 4 /* Driver for 53c700 and 53c700-66 chips from NCR and Symbios 5 * 6 * Copyright (C) 2001 by James.Bottomley@HansenPartnership.com 7 */ 8 9 #ifndef _53C700_H 10 #define _53C700_H 11 12 #include <linux/interrupt.h> 13 #include <asm/io.h> 14 15 #include <scsi/scsi_device.h> 16 #include <scsi/scsi_cmnd.h> 17 18 /* Turn on for general debugging---too verbose for normal use */ 19 #undef NCR_700_DEBUG 20 /* Debug the tag queues, checking hash queue allocation and deallocation 21 * and search for duplicate tags */ 22 #undef NCR_700_TAG_DEBUG 23 24 #ifdef NCR_700_DEBUG 25 #define DEBUG(x) printk x 26 #define DDEBUG(prefix, sdev, fmt, a...) \ 27 sdev_printk(prefix, sdev, fmt, ##a) 28 #define CDEBUG(prefix, scmd, fmt, a...) \ 29 scmd_printk(prefix, scmd, fmt, ##a) 30 #else 31 #define DEBUG(x) do {} while (0) 32 #define DDEBUG(prefix, scmd, fmt, a...) do {} while (0) 33 #define CDEBUG(prefix, scmd, fmt, a...) do {} while (0) 34 #endif 35 36 /* The number of available command slots */ 37 #define NCR_700_COMMAND_SLOTS_PER_HOST 64 38 /* The maximum number of Scatter Gathers we allow */ 39 #define NCR_700_SG_SEGMENTS 32 40 /* The maximum number of luns (make this of the form 2^n) */ 41 #define NCR_700_MAX_LUNS 32 42 #define NCR_700_LUN_MASK (NCR_700_MAX_LUNS - 1) 43 /* Maximum number of tags the driver ever allows per device */ 44 #define NCR_700_MAX_TAGS 16 45 /* Tag depth the driver starts out with (can be altered in sysfs) */ 46 #define NCR_700_DEFAULT_TAGS 4 47 /* This is the default number of commands per LUN in the untagged case. 48 * two is a good value because it means we can have one command active and 49 * one command fully prepared and waiting 50 */ 51 #define NCR_700_CMD_PER_LUN 2 52 /* magic byte identifying an internally generated REQUEST_SENSE command */ 53 #define NCR_700_INTERNAL_SENSE_MAGIC 0x42 54 55 struct NCR_700_Host_Parameters; 56 57 /* These are the externally used routines */ 58 struct Scsi_Host *NCR_700_detect(struct scsi_host_template *, 59 struct NCR_700_Host_Parameters *, struct device *); 60 int NCR_700_release(struct Scsi_Host *host); 61 irqreturn_t NCR_700_intr(int, void *); 62 63 64 enum NCR_700_Host_State { 65 NCR_700_HOST_BUSY, 66 NCR_700_HOST_FREE, 67 }; 68 69 struct NCR_700_SG_List { 70 /* The following is a script fragment to move the buffer onto the 71 * bus and then link the next fragment or return */ 72 #define SCRIPT_MOVE_DATA_IN 0x09000000 73 #define SCRIPT_MOVE_DATA_OUT 0x08000000 74 __u32 ins; 75 __u32 pAddr; 76 #define SCRIPT_NOP 0x80000000 77 #define SCRIPT_RETURN 0x90080000 78 }; 79 80 struct NCR_700_Device_Parameters { 81 /* space for creating a request sense command. Really, except 82 * for the annoying SCSI-2 requirement for LUN information in 83 * cmnd[1], this could be in static storage */ 84 unsigned char cmnd[MAX_COMMAND_SIZE]; 85 __u8 depth; 86 struct scsi_cmnd *current_cmnd; /* currently active command */ 87 }; 88 89 90 /* The SYNC negotiation sequence looks like: 91 * 92 * If DEV_NEGOTIATED_SYNC not set, tack and SDTR message on to the 93 * initial identify for the device and set DEV_BEGIN_SYNC_NEGOTATION 94 * If we get an SDTR reply, work out the SXFER parameters, squirrel 95 * them away here, clear DEV_BEGIN_SYNC_NEGOTIATION and set 96 * DEV_NEGOTIATED_SYNC. If we get a REJECT msg, squirrel 97 * 98 * 99 * 0:7 SXFER_REG negotiated value for this device 100 * 8:15 Current queue depth 101 * 16 negotiated SYNC flag 102 * 17 begin SYNC negotiation flag 103 * 18 device supports tag queueing */ 104 #define NCR_700_DEV_NEGOTIATED_SYNC (1<<16) 105 #define NCR_700_DEV_BEGIN_SYNC_NEGOTIATION (1<<17) 106 #define NCR_700_DEV_PRINT_SYNC_NEGOTIATION (1<<19) 107 108 static inline char *NCR_700_get_sense_cmnd(struct scsi_device *SDp) 109 { 110 struct NCR_700_Device_Parameters *hostdata = SDp->hostdata; 111 112 return hostdata->cmnd; 113 } 114 115 static inline void 116 NCR_700_set_depth(struct scsi_device *SDp, __u8 depth) 117 { 118 struct NCR_700_Device_Parameters *hostdata = SDp->hostdata; 119 120 hostdata->depth = depth; 121 } 122 static inline __u8 123 NCR_700_get_depth(struct scsi_device *SDp) 124 { 125 struct NCR_700_Device_Parameters *hostdata = SDp->hostdata; 126 127 return hostdata->depth; 128 } 129 static inline int 130 NCR_700_is_flag_set(struct scsi_device *SDp, __u32 flag) 131 { 132 return (spi_flags(SDp->sdev_target) & flag) == flag; 133 } 134 static inline int 135 NCR_700_is_flag_clear(struct scsi_device *SDp, __u32 flag) 136 { 137 return (spi_flags(SDp->sdev_target) & flag) == 0; 138 } 139 static inline void 140 NCR_700_set_flag(struct scsi_device *SDp, __u32 flag) 141 { 142 spi_flags(SDp->sdev_target) |= flag; 143 } 144 static inline void 145 NCR_700_clear_flag(struct scsi_device *SDp, __u32 flag) 146 { 147 spi_flags(SDp->sdev_target) &= ~flag; 148 } 149 150 enum NCR_700_tag_neg_state { 151 NCR_700_START_TAG_NEGOTIATION = 0, 152 NCR_700_DURING_TAG_NEGOTIATION = 1, 153 NCR_700_FINISHED_TAG_NEGOTIATION = 2, 154 }; 155 156 static inline enum NCR_700_tag_neg_state 157 NCR_700_get_tag_neg_state(struct scsi_device *SDp) 158 { 159 return (enum NCR_700_tag_neg_state)((spi_flags(SDp->sdev_target)>>20) & 0x3); 160 } 161 162 static inline void 163 NCR_700_set_tag_neg_state(struct scsi_device *SDp, 164 enum NCR_700_tag_neg_state state) 165 { 166 /* clear the slot */ 167 spi_flags(SDp->sdev_target) &= ~(0x3 << 20); 168 spi_flags(SDp->sdev_target) |= ((__u32)state) << 20; 169 } 170 171 struct NCR_700_command_slot { 172 struct NCR_700_SG_List SG[NCR_700_SG_SEGMENTS+1]; 173 struct NCR_700_SG_List *pSG; 174 #define NCR_700_SLOT_MASK 0xFC 175 #define NCR_700_SLOT_MAGIC 0xb8 176 #define NCR_700_SLOT_FREE (0|NCR_700_SLOT_MAGIC) /* slot may be used */ 177 #define NCR_700_SLOT_BUSY (1|NCR_700_SLOT_MAGIC) /* slot has command active on HA */ 178 #define NCR_700_SLOT_QUEUED (2|NCR_700_SLOT_MAGIC) /* slot has command to be made active on HA */ 179 __u8 state; 180 #define NCR_700_FLAG_AUTOSENSE 0x01 181 __u8 flags; 182 __u8 pad1[2]; /* Needed for m68k where min alignment is 2 bytes */ 183 int tag; 184 __u32 resume_offset; 185 struct scsi_cmnd *cmnd; 186 /* The pci_mapped address of the actual command in cmnd */ 187 dma_addr_t pCmd; 188 __u32 temp; 189 /* if this command is a pci_single mapping, holds the dma address 190 * for later unmapping in the done routine */ 191 dma_addr_t dma_handle; 192 /* historical remnant, now used to link free commands */ 193 struct NCR_700_command_slot *ITL_forw; 194 }; 195 196 struct NCR_700_Host_Parameters { 197 /* These must be filled in by the calling driver */ 198 int clock; /* board clock speed in MHz */ 199 void __iomem *base; /* the base for the port (copied to host) */ 200 struct device *dev; 201 __u32 dmode_extra; /* adjustable bus settings */ 202 __u32 dcntl_extra; /* adjustable bus settings */ 203 __u32 ctest7_extra; /* adjustable bus settings */ 204 __u32 differential:1; /* if we are differential */ 205 #ifdef CONFIG_53C700_LE_ON_BE 206 /* This option is for HP only. Set it if your chip is wired for 207 * little endian on this platform (which is big endian) */ 208 __u32 force_le_on_be:1; 209 #endif 210 __u32 chip710:1; /* set if really a 710 not 700 */ 211 __u32 burst_length:4; /* set to 0 to disable 710 bursting */ 212 213 /* NOTHING BELOW HERE NEEDS ALTERING */ 214 __u32 fast:1; /* if we can alter the SCSI bus clock 215 speed (so can negiotiate sync) */ 216 int sync_clock; /* The speed of the SYNC core */ 217 218 __u32 *script; /* pointer to script location */ 219 __u32 pScript; /* physical mem addr of script */ 220 221 enum NCR_700_Host_State state; /* protected by state lock */ 222 struct scsi_cmnd *cmd; 223 /* Note: pScript contains the single consistent block of 224 * memory. All the msgin, msgout and status are allocated in 225 * this memory too (at separate cache lines). TOTAL_MEM_SIZE 226 * represents the total size of this area */ 227 #define MSG_ARRAY_SIZE 8 228 #define MSGOUT_OFFSET (L1_CACHE_ALIGN(sizeof(SCRIPT))) 229 __u8 *msgout; 230 #define MSGIN_OFFSET (MSGOUT_OFFSET + L1_CACHE_ALIGN(MSG_ARRAY_SIZE)) 231 __u8 *msgin; 232 #define STATUS_OFFSET (MSGIN_OFFSET + L1_CACHE_ALIGN(MSG_ARRAY_SIZE)) 233 __u8 *status; 234 #define SLOTS_OFFSET (STATUS_OFFSET + L1_CACHE_ALIGN(MSG_ARRAY_SIZE)) 235 struct NCR_700_command_slot *slots; 236 #define TOTAL_MEM_SIZE (SLOTS_OFFSET + L1_CACHE_ALIGN(sizeof(struct NCR_700_command_slot) * NCR_700_COMMAND_SLOTS_PER_HOST)) 237 int saved_slot_position; 238 int command_slot_count; /* protected by state lock */ 239 __u8 tag_negotiated; 240 __u8 rev; 241 __u8 reselection_id; 242 __u8 min_period; 243 244 /* Free list, singly linked by ITL_forw elements */ 245 struct NCR_700_command_slot *free_list; 246 /* Completion for waited for ops, like reset, abort or 247 * device reset. 248 * 249 * NOTE: relies on single threading in the error handler to 250 * have only one outstanding at once */ 251 struct completion *eh_complete; 252 }; 253 254 /* 255 * 53C700 Register Interface - the offset from the Selected base 256 * I/O address */ 257 #ifdef CONFIG_53C700_LE_ON_BE 258 #define bE (hostdata->force_le_on_be ? 0 : 3) 259 #define bSWAP (hostdata->force_le_on_be) 260 #define bEBus (!hostdata->force_le_on_be) 261 #elif defined(__BIG_ENDIAN) 262 #define bE 3 263 #define bSWAP 0 264 #elif defined(__LITTLE_ENDIAN) 265 #define bE 0 266 #define bSWAP 0 267 #else 268 #error "__BIG_ENDIAN or __LITTLE_ENDIAN must be defined, did you include byteorder.h?" 269 #endif 270 #ifndef bEBus 271 #ifdef CONFIG_53C700_BE_BUS 272 #define bEBus 1 273 #else 274 #define bEBus 0 275 #endif 276 #endif 277 #define bS_to_cpu(x) (bSWAP ? le32_to_cpu(x) : (x)) 278 #define bS_to_host(x) (bSWAP ? cpu_to_le32(x) : (x)) 279 280 /* NOTE: These registers are in the LE register space only, the required byte 281 * swapping is done by the NCR_700_{read|write}[b] functions */ 282 #define SCNTL0_REG 0x00 283 #define FULL_ARBITRATION 0xc0 284 #define PARITY 0x08 285 #define ENABLE_PARITY 0x04 286 #define AUTO_ATN 0x02 287 #define SCNTL1_REG 0x01 288 #define SLOW_BUS 0x80 289 #define ENABLE_SELECT 0x20 290 #define ASSERT_RST 0x08 291 #define ASSERT_EVEN_PARITY 0x04 292 #define SDID_REG 0x02 293 #define SIEN_REG 0x03 294 #define PHASE_MM_INT 0x80 295 #define FUNC_COMP_INT 0x40 296 #define SEL_TIMEOUT_INT 0x20 297 #define SELECT_INT 0x10 298 #define GROSS_ERR_INT 0x08 299 #define UX_DISC_INT 0x04 300 #define RST_INT 0x02 301 #define PAR_ERR_INT 0x01 302 #define SCID_REG 0x04 303 #define SXFER_REG 0x05 304 #define ASYNC_OPERATION 0x00 305 #define SODL_REG 0x06 306 #define SOCL_REG 0x07 307 #define SFBR_REG 0x08 308 #define SIDL_REG 0x09 309 #define SBDL_REG 0x0A 310 #define SBCL_REG 0x0B 311 /* read bits */ 312 #define SBCL_IO 0x01 313 /*write bits */ 314 #define SYNC_DIV_AS_ASYNC 0x00 315 #define SYNC_DIV_1_0 0x01 316 #define SYNC_DIV_1_5 0x02 317 #define SYNC_DIV_2_0 0x03 318 #define DSTAT_REG 0x0C 319 #define ILGL_INST_DETECTED 0x01 320 #define WATCH_DOG_INTERRUPT 0x02 321 #define SCRIPT_INT_RECEIVED 0x04 322 #define ABORTED 0x10 323 #define SSTAT0_REG 0x0D 324 #define PARITY_ERROR 0x01 325 #define SCSI_RESET_DETECTED 0x02 326 #define UNEXPECTED_DISCONNECT 0x04 327 #define SCSI_GROSS_ERROR 0x08 328 #define SELECTED 0x10 329 #define SELECTION_TIMEOUT 0x20 330 #define FUNCTION_COMPLETE 0x40 331 #define PHASE_MISMATCH 0x80 332 #define SSTAT1_REG 0x0E 333 #define SIDL_REG_FULL 0x80 334 #define SODR_REG_FULL 0x40 335 #define SODL_REG_FULL 0x20 336 #define SSTAT2_REG 0x0F 337 #define CTEST0_REG 0x14 338 #define BTB_TIMER_DISABLE 0x40 339 #define CTEST1_REG 0x15 340 #define CTEST2_REG 0x16 341 #define CTEST3_REG 0x17 342 #define CTEST4_REG 0x18 343 #define DISABLE_FIFO 0x00 344 #define SLBE 0x10 345 #define SFWR 0x08 346 #define BYTE_LANE0 0x04 347 #define BYTE_LANE1 0x05 348 #define BYTE_LANE2 0x06 349 #define BYTE_LANE3 0x07 350 #define SCSI_ZMODE 0x20 351 #define ZMODE 0x40 352 #define CTEST5_REG 0x19 353 #define MASTER_CONTROL 0x10 354 #define DMA_DIRECTION 0x08 355 #define CTEST7_REG 0x1B 356 #define BURST_DISABLE 0x80 /* 710 only */ 357 #define SEL_TIMEOUT_DISABLE 0x10 /* 710 only */ 358 #define DFP 0x08 359 #define EVP 0x04 360 #define CTEST7_TT1 0x02 361 #define DIFF 0x01 362 #define CTEST6_REG 0x1A 363 #define TEMP_REG 0x1C 364 #define DFIFO_REG 0x20 365 #define FLUSH_DMA_FIFO 0x80 366 #define CLR_FIFO 0x40 367 #define ISTAT_REG 0x21 368 #define ABORT_OPERATION 0x80 369 #define SOFTWARE_RESET_710 0x40 370 #define DMA_INT_PENDING 0x01 371 #define SCSI_INT_PENDING 0x02 372 #define CONNECTED 0x08 373 #define CTEST8_REG 0x22 374 #define LAST_DIS_ENBL 0x01 375 #define SHORTEN_FILTERING 0x04 376 #define ENABLE_ACTIVE_NEGATION 0x10 377 #define GENERATE_RECEIVE_PARITY 0x20 378 #define CLR_FIFO_710 0x04 379 #define FLUSH_DMA_FIFO_710 0x08 380 #define CTEST9_REG 0x23 381 #define DBC_REG 0x24 382 #define DCMD_REG 0x27 383 #define DNAD_REG 0x28 384 #define DIEN_REG 0x39 385 #define BUS_FAULT 0x20 386 #define ABORT_INT 0x10 387 #define INT_INST_INT 0x04 388 #define WD_INT 0x02 389 #define ILGL_INST_INT 0x01 390 #define DCNTL_REG 0x3B 391 #define SOFTWARE_RESET 0x01 392 #define COMPAT_700_MODE 0x01 393 #define SCRPTS_16BITS 0x20 394 #define EA_710 0x20 395 #define ASYNC_DIV_2_0 0x00 396 #define ASYNC_DIV_1_5 0x40 397 #define ASYNC_DIV_1_0 0x80 398 #define ASYNC_DIV_3_0 0xc0 399 #define DMODE_710_REG 0x38 400 #define DMODE_700_REG 0x34 401 #define BURST_LENGTH_1 0x00 402 #define BURST_LENGTH_2 0x40 403 #define BURST_LENGTH_4 0x80 404 #define BURST_LENGTH_8 0xC0 405 #define DMODE_FC1 0x10 406 #define DMODE_FC2 0x20 407 #define BW16 32 408 #define MODE_286 16 409 #define IO_XFER 8 410 #define FIXED_ADDR 4 411 412 #define DSP_REG 0x2C 413 #define DSPS_REG 0x30 414 415 /* Parameters to begin SDTR negotiations. Empirically, I find that 416 * the 53c700-66 cannot handle an offset >8, so don't change this */ 417 #define NCR_700_MAX_OFFSET 8 418 /* Was hoping the max offset would be greater for the 710, but 419 * empirically it seems to be 8 also */ 420 #define NCR_710_MAX_OFFSET 8 421 #define NCR_700_MIN_XFERP 1 422 #define NCR_710_MIN_XFERP 0 423 #define NCR_700_MIN_PERIOD 25 /* for SDTR message, 100ns */ 424 425 #define script_patch_32(dev, script, symbol, value) \ 426 { \ 427 int i; \ 428 dma_addr_t da = value; \ 429 for(i=0; i< (sizeof(A_##symbol##_used) / sizeof(__u32)); i++) { \ 430 __u32 val = bS_to_cpu((script)[A_##symbol##_used[i]]) + da; \ 431 (script)[A_##symbol##_used[i]] = bS_to_host(val); \ 432 dma_cache_sync((dev), &(script)[A_##symbol##_used[i]], 4, DMA_TO_DEVICE); \ 433 DEBUG((" script, patching %s at %d to %pad\n", \ 434 #symbol, A_##symbol##_used[i], &da)); \ 435 } \ 436 } 437 438 #define script_patch_32_abs(dev, script, symbol, value) \ 439 { \ 440 int i; \ 441 dma_addr_t da = value; \ 442 for(i=0; i< (sizeof(A_##symbol##_used) / sizeof(__u32)); i++) { \ 443 (script)[A_##symbol##_used[i]] = bS_to_host(da); \ 444 dma_cache_sync((dev), &(script)[A_##symbol##_used[i]], 4, DMA_TO_DEVICE); \ 445 DEBUG((" script, patching %s at %d to %pad\n", \ 446 #symbol, A_##symbol##_used[i], &da)); \ 447 } \ 448 } 449 450 /* Used for patching the SCSI ID in the SELECT instruction */ 451 #define script_patch_ID(dev, script, symbol, value) \ 452 { \ 453 int i; \ 454 for(i=0; i< (sizeof(A_##symbol##_used) / sizeof(__u32)); i++) { \ 455 __u32 val = bS_to_cpu((script)[A_##symbol##_used[i]]); \ 456 val &= 0xff00ffff; \ 457 val |= ((value) & 0xff) << 16; \ 458 (script)[A_##symbol##_used[i]] = bS_to_host(val); \ 459 dma_cache_sync((dev), &(script)[A_##symbol##_used[i]], 4, DMA_TO_DEVICE); \ 460 DEBUG((" script, patching ID field %s at %d to 0x%x\n", \ 461 #symbol, A_##symbol##_used[i], val)); \ 462 } \ 463 } 464 465 #define script_patch_16(dev, script, symbol, value) \ 466 { \ 467 int i; \ 468 for(i=0; i< (sizeof(A_##symbol##_used) / sizeof(__u32)); i++) { \ 469 __u32 val = bS_to_cpu((script)[A_##symbol##_used[i]]); \ 470 val &= 0xffff0000; \ 471 val |= ((value) & 0xffff); \ 472 (script)[A_##symbol##_used[i]] = bS_to_host(val); \ 473 dma_cache_sync((dev), &(script)[A_##symbol##_used[i]], 4, DMA_TO_DEVICE); \ 474 DEBUG((" script, patching short field %s at %d to 0x%x\n", \ 475 #symbol, A_##symbol##_used[i], val)); \ 476 } \ 477 } 478 479 480 static inline __u8 481 NCR_700_readb(struct Scsi_Host *host, __u32 reg) 482 { 483 const struct NCR_700_Host_Parameters *hostdata 484 = (struct NCR_700_Host_Parameters *)host->hostdata[0]; 485 486 return ioread8(hostdata->base + (reg^bE)); 487 } 488 489 static inline __u32 490 NCR_700_readl(struct Scsi_Host *host, __u32 reg) 491 { 492 const struct NCR_700_Host_Parameters *hostdata 493 = (struct NCR_700_Host_Parameters *)host->hostdata[0]; 494 __u32 value = bEBus ? ioread32be(hostdata->base + reg) : 495 ioread32(hostdata->base + reg); 496 #if 1 497 /* sanity check the register */ 498 BUG_ON((reg & 0x3) != 0); 499 #endif 500 501 return value; 502 } 503 504 static inline void 505 NCR_700_writeb(__u8 value, struct Scsi_Host *host, __u32 reg) 506 { 507 const struct NCR_700_Host_Parameters *hostdata 508 = (struct NCR_700_Host_Parameters *)host->hostdata[0]; 509 510 iowrite8(value, hostdata->base + (reg^bE)); 511 } 512 513 static inline void 514 NCR_700_writel(__u32 value, struct Scsi_Host *host, __u32 reg) 515 { 516 const struct NCR_700_Host_Parameters *hostdata 517 = (struct NCR_700_Host_Parameters *)host->hostdata[0]; 518 519 #if 1 520 /* sanity check the register */ 521 BUG_ON((reg & 0x3) != 0); 522 #endif 523 524 bEBus ? iowrite32be(value, hostdata->base + reg): 525 iowrite32(value, hostdata->base + reg); 526 } 527 528 #endif 529