1 /* 2 3w-xxxx.c -- 3ware Storage Controller device driver for Linux. 3 4 Written By: Adam Radford <aradford@gmail.com> 5 Modifications By: Joel Jacobson <linux@3ware.com> 6 Arnaldo Carvalho de Melo <acme@conectiva.com.br> 7 Brad Strand <linux@3ware.com> 8 9 Copyright (C) 1999-2010 3ware Inc. 10 11 Kernel compatibility By: Andre Hedrick <andre@suse.com> 12 Non-Copyright (C) 2000 Andre Hedrick <andre@suse.com> 13 14 Further tiny build fixes and trivial hoovering Alan Cox 15 16 This program is free software; you can redistribute it and/or modify 17 it under the terms of the GNU General Public License as published by 18 the Free Software Foundation; version 2 of the License. 19 20 This program is distributed in the hope that it will be useful, 21 but WITHOUT ANY WARRANTY; without even the implied warranty of 22 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 23 GNU General Public License for more details. 24 25 NO WARRANTY 26 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR 27 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT 28 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, 29 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is 30 solely responsible for determining the appropriateness of using and 31 distributing the Program and assumes all risks associated with its 32 exercise of rights under this Agreement, including but not limited to 33 the risks and costs of program errors, damage to or loss of data, 34 programs or equipment, and unavailability or interruption of operations. 35 36 DISCLAIMER OF LIABILITY 37 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY 38 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 39 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND 40 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR 41 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE 42 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED 43 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES 44 45 You should have received a copy of the GNU General Public License 46 along with this program; if not, write to the Free Software 47 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 48 49 Bugs/Comments/Suggestions should be mailed to: 50 51 aradford@gmail.com 52 53 54 History 55 ------- 56 0.1.000 - Initial release. 57 0.4.000 - Added support for Asynchronous Event Notification through 58 ioctls for 3DM. 59 1.0.000 - Added DPO & FUA bit support for WRITE_10 & WRITE_6 cdb 60 to disable drive write-cache before writes. 61 1.1.000 - Fixed performance bug with DPO & FUA not existing for WRITE_6. 62 1.2.000 - Added support for clean shutdown notification/feature table. 63 1.02.00.001 - Added support for full command packet posts through ioctls 64 for 3DM. 65 Bug fix so hot spare drives don't show up. 66 1.02.00.002 - Fix bug with tw_setfeature() call that caused oops on some 67 systems. 68 08/21/00 - release previously allocated resources on failure at 69 tw_allocate_memory (acme) 70 1.02.00.003 - Fix tw_interrupt() to report error to scsi layer when 71 controller status is non-zero. 72 Added handling of request_sense opcode. 73 Fix possible null pointer dereference in 74 tw_reset_device_extension() 75 1.02.00.004 - Add support for device id of 3ware 7000 series controllers. 76 Make tw_setfeature() call with interrupts disabled. 77 Register interrupt handler before enabling interrupts. 78 Clear attention interrupt before draining aen queue. 79 1.02.00.005 - Allocate bounce buffers and custom queue depth for raid5 for 80 6000 and 5000 series controllers. 81 Reduce polling mdelays causing problems on some systems. 82 Fix use_sg = 1 calculation bug. 83 Check for scsi_register returning NULL. 84 Add aen count to /proc/scsi/3w-xxxx. 85 Remove aen code unit masking in tw_aen_complete(). 86 1.02.00.006 - Remove unit from printk in tw_scsi_eh_abort(), causing 87 possible oops. 88 Fix possible null pointer dereference in tw_scsi_queue() 89 if done function pointer was invalid. 90 1.02.00.007 - Fix possible null pointer dereferences in tw_ioctl(). 91 Remove check for invalid done function pointer from 92 tw_scsi_queue(). 93 1.02.00.008 - Set max sectors per io to TW_MAX_SECTORS in tw_findcards(). 94 Add tw_decode_error() for printing readable error messages. 95 Print some useful information on certain aen codes. 96 Add tw_decode_bits() for interpreting status register output. 97 Make scsi_set_pci_device() for kernels >= 2.4.4 98 Fix bug where aen's could be lost before a reset. 99 Re-add spinlocks in tw_scsi_detect(). 100 Fix possible null pointer dereference in tw_aen_drain_queue() 101 during initialization. 102 Clear pci parity errors during initialization and during io. 103 1.02.00.009 - Remove redundant increment in tw_state_request_start(). 104 Add ioctl support for direct ATA command passthru. 105 Add entire aen code string list. 106 1.02.00.010 - Cleanup queueing code, fix jbod thoughput. 107 Fix get_param for specific units. 108 1.02.00.011 - Fix bug in tw_aen_complete() where aen's could be lost. 109 Fix tw_aen_drain_queue() to display useful info at init. 110 Set tw_host->max_id for 12 port cards. 111 Add ioctl support for raw command packet post from userspace 112 with sglist fragments (parameter and io). 113 1.02.00.012 - Fix read capacity to under report by 1 sector to fix get 114 last sector ioctl. 115 1.02.00.013 - Fix bug where more AEN codes weren't coming out during 116 driver initialization. 117 Improved handling of PCI aborts. 118 1.02.00.014 - Fix bug in tw_findcards() where AEN code could be lost. 119 Increase timeout in tw_aen_drain_queue() to 30 seconds. 120 1.02.00.015 - Re-write raw command post with data ioctl method. 121 Remove raid5 bounce buffers for raid5 for 6XXX for kernel 2.5 122 Add tw_map/unmap_scsi_sg/single_data() for kernel 2.5 123 Replace io_request_lock with host_lock for kernel 2.5 124 Set max_cmd_len to 16 for 3dm for kernel 2.5 125 1.02.00.016 - Set host->max_sectors back up to 256. 126 1.02.00.017 - Modified pci parity error handling/clearing from config space 127 during initialization. 128 1.02.00.018 - Better handling of request sense opcode and sense information 129 for failed commands. Add tw_decode_sense(). 130 Replace all mdelay()'s with scsi_sleep(). 131 1.02.00.019 - Revert mdelay's and scsi_sleep's, this caused problems on 132 some SMP systems. 133 1.02.00.020 - Add pci_set_dma_mask(), rewrite kmalloc()/virt_to_bus() to 134 pci_alloc/free_consistent(). 135 Better alignment checking in tw_allocate_memory(). 136 Cleanup tw_initialize_device_extension(). 137 1.02.00.021 - Bump cmd_per_lun in SHT to 255 for better jbod performance. 138 Improve handling of errors in tw_interrupt(). 139 Add handling/clearing of controller queue error. 140 Empty stale responses before draining aen queue. 141 Fix tw_scsi_eh_abort() to not reset on every io abort. 142 Set can_queue in SHT to 255 to prevent hang from AEN. 143 1.02.00.022 - Fix possible null pointer dereference in tw_scsi_release(). 144 1.02.00.023 - Fix bug in tw_aen_drain_queue() where unit # was always zero. 145 1.02.00.024 - Add severity levels to AEN strings. 146 1.02.00.025 - Fix command interrupt spurious error messages. 147 Fix bug in raw command post with data ioctl method. 148 Fix bug where rollcall sometimes failed with cable errors. 149 Print unit # on all command timeouts. 150 1.02.00.026 - Fix possible infinite retry bug with power glitch induced 151 drive timeouts. 152 Cleanup some AEN severity levels. 153 1.02.00.027 - Add drive not supported AEN code for SATA controllers. 154 Remove spurious unknown ioctl error message. 155 1.02.00.028 - Fix bug where multiple controllers with no units were the 156 same card number. 157 Fix bug where cards were being shut down more than once. 158 1.02.00.029 - Add missing pci_free_consistent() in tw_allocate_memory(). 159 Replace pci_map_single() with pci_map_page() for highmem. 160 Check for tw_setfeature() failure. 161 1.02.00.030 - Make driver 64-bit clean. 162 1.02.00.031 - Cleanup polling timeouts/routines in several places. 163 Add support for mode sense opcode. 164 Add support for cache mode page. 165 Add support for synchronize cache opcode. 166 1.02.00.032 - Fix small multicard rollcall bug. 167 Make driver stay loaded with no units for hot add/swap. 168 Add support for "twe" character device for ioctls. 169 Clean up request_id queueing code. 170 Fix tw_scsi_queue() spinlocks. 171 1.02.00.033 - Fix tw_aen_complete() to not queue 'queue empty' AEN's. 172 Initialize queues correctly when loading with no valid units. 173 1.02.00.034 - Fix tw_decode_bits() to handle multiple errors. 174 Add support for user configurable cmd_per_lun. 175 Add support for sht->slave_configure(). 176 1.02.00.035 - Improve tw_allocate_memory() memory allocation. 177 Fix tw_chrdev_ioctl() to sleep correctly. 178 1.02.00.036 - Increase character ioctl timeout to 60 seconds. 179 1.02.00.037 - Fix tw_ioctl() to handle all non-data ATA passthru cmds 180 for 'smartmontools' support. 181 1.26.00.038 - Roll driver minor version to 26 to denote kernel 2.6. 182 Add support for cmds_per_lun module parameter. 183 1.26.00.039 - Fix bug in tw_chrdev_ioctl() polling code. 184 Fix data_buffer_length usage in tw_chrdev_ioctl(). 185 Update contact information. 186 1.26.02.000 - Convert driver to pci_driver format. 187 1.26.02.001 - Increase max ioctl buffer size to 512 sectors. 188 Make tw_scsi_queue() return 0 for 'Unknown scsi opcode'. 189 Fix tw_remove() to free irq handler/unregister_chrdev() 190 before shutting down card. 191 Change to new 'change_queue_depth' api. 192 Fix 'handled=1' ISR usage, remove bogus IRQ check. 193 1.26.02.002 - Free irq handler in __tw_shutdown(). 194 Turn on RCD bit for caching mode page. 195 Serialize reset code. 196 1.26.02.003 - Force 60 second timeout default. 197 */ 198 199 #include <linux/module.h> 200 #include <linux/reboot.h> 201 #include <linux/spinlock.h> 202 #include <linux/interrupt.h> 203 #include <linux/moduleparam.h> 204 #include <linux/errno.h> 205 #include <linux/types.h> 206 #include <linux/delay.h> 207 #include <linux/gfp.h> 208 #include <linux/pci.h> 209 #include <linux/time.h> 210 #include <linux/mutex.h> 211 #include <asm/io.h> 212 #include <asm/irq.h> 213 #include <linux/uaccess.h> 214 #include <scsi/scsi.h> 215 #include <scsi/scsi_host.h> 216 #include <scsi/scsi_tcq.h> 217 #include <scsi/scsi_cmnd.h> 218 #include <scsi/scsi_eh.h> 219 #include "3w-xxxx.h" 220 221 /* Globals */ 222 #define TW_DRIVER_VERSION "1.26.02.003" 223 static DEFINE_MUTEX(tw_mutex); 224 static TW_Device_Extension *tw_device_extension_list[TW_MAX_SLOT]; 225 static int tw_device_extension_count = 0; 226 static int twe_major = -1; 227 228 /* Module parameters */ 229 MODULE_AUTHOR("LSI"); 230 MODULE_DESCRIPTION("3ware Storage Controller Linux Driver"); 231 MODULE_LICENSE("GPL"); 232 MODULE_VERSION(TW_DRIVER_VERSION); 233 234 /* Function prototypes */ 235 static int tw_reset_device_extension(TW_Device_Extension *tw_dev); 236 237 /* Functions */ 238 239 /* This function will check the status register for unexpected bits */ 240 static int tw_check_bits(u32 status_reg_value) 241 { 242 if ((status_reg_value & TW_STATUS_EXPECTED_BITS) != TW_STATUS_EXPECTED_BITS) { 243 dprintk(KERN_WARNING "3w-xxxx: tw_check_bits(): No expected bits (0x%x).\n", status_reg_value); 244 return 1; 245 } 246 if ((status_reg_value & TW_STATUS_UNEXPECTED_BITS) != 0) { 247 dprintk(KERN_WARNING "3w-xxxx: tw_check_bits(): Found unexpected bits (0x%x).\n", status_reg_value); 248 return 1; 249 } 250 251 return 0; 252 } /* End tw_check_bits() */ 253 254 /* This function will print readable messages from status register errors */ 255 static int tw_decode_bits(TW_Device_Extension *tw_dev, u32 status_reg_value, int print_host) 256 { 257 char host[16]; 258 259 dprintk(KERN_WARNING "3w-xxxx: tw_decode_bits()\n"); 260 261 if (print_host) 262 sprintf(host, " scsi%d:", tw_dev->host->host_no); 263 else 264 host[0] = '\0'; 265 266 if (status_reg_value & TW_STATUS_PCI_PARITY_ERROR) { 267 printk(KERN_WARNING "3w-xxxx:%s PCI Parity Error: clearing.\n", host); 268 outl(TW_CONTROL_CLEAR_PARITY_ERROR, TW_CONTROL_REG_ADDR(tw_dev)); 269 } 270 271 if (status_reg_value & TW_STATUS_PCI_ABORT) { 272 printk(KERN_WARNING "3w-xxxx:%s PCI Abort: clearing.\n", host); 273 outl(TW_CONTROL_CLEAR_PCI_ABORT, TW_CONTROL_REG_ADDR(tw_dev)); 274 pci_write_config_word(tw_dev->tw_pci_dev, PCI_STATUS, TW_PCI_CLEAR_PCI_ABORT); 275 } 276 277 if (status_reg_value & TW_STATUS_QUEUE_ERROR) { 278 printk(KERN_WARNING "3w-xxxx:%s Controller Queue Error: clearing.\n", host); 279 outl(TW_CONTROL_CLEAR_QUEUE_ERROR, TW_CONTROL_REG_ADDR(tw_dev)); 280 } 281 282 if (status_reg_value & TW_STATUS_SBUF_WRITE_ERROR) { 283 printk(KERN_WARNING "3w-xxxx:%s SBUF Write Error: clearing.\n", host); 284 outl(TW_CONTROL_CLEAR_SBUF_WRITE_ERROR, TW_CONTROL_REG_ADDR(tw_dev)); 285 } 286 287 if (status_reg_value & TW_STATUS_MICROCONTROLLER_ERROR) { 288 if (tw_dev->reset_print == 0) { 289 printk(KERN_WARNING "3w-xxxx:%s Microcontroller Error: clearing.\n", host); 290 tw_dev->reset_print = 1; 291 } 292 return 1; 293 } 294 295 return 0; 296 } /* End tw_decode_bits() */ 297 298 /* This function will poll the status register for a flag */ 299 static int tw_poll_status(TW_Device_Extension *tw_dev, u32 flag, int seconds) 300 { 301 u32 status_reg_value; 302 unsigned long before; 303 int retval = 1; 304 305 status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev)); 306 before = jiffies; 307 308 if (tw_check_bits(status_reg_value)) 309 tw_decode_bits(tw_dev, status_reg_value, 0); 310 311 while ((status_reg_value & flag) != flag) { 312 status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev)); 313 314 if (tw_check_bits(status_reg_value)) 315 tw_decode_bits(tw_dev, status_reg_value, 0); 316 317 if (time_after(jiffies, before + HZ * seconds)) 318 goto out; 319 320 msleep(50); 321 } 322 retval = 0; 323 out: 324 return retval; 325 } /* End tw_poll_status() */ 326 327 /* This function will poll the status register for disappearance of a flag */ 328 static int tw_poll_status_gone(TW_Device_Extension *tw_dev, u32 flag, int seconds) 329 { 330 u32 status_reg_value; 331 unsigned long before; 332 int retval = 1; 333 334 status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev)); 335 before = jiffies; 336 337 if (tw_check_bits(status_reg_value)) 338 tw_decode_bits(tw_dev, status_reg_value, 0); 339 340 while ((status_reg_value & flag) != 0) { 341 status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev)); 342 343 if (tw_check_bits(status_reg_value)) 344 tw_decode_bits(tw_dev, status_reg_value, 0); 345 346 if (time_after(jiffies, before + HZ * seconds)) 347 goto out; 348 349 msleep(50); 350 } 351 retval = 0; 352 out: 353 return retval; 354 } /* End tw_poll_status_gone() */ 355 356 /* This function will attempt to post a command packet to the board */ 357 static int tw_post_command_packet(TW_Device_Extension *tw_dev, int request_id) 358 { 359 u32 status_reg_value; 360 unsigned long command_que_value; 361 362 dprintk(KERN_NOTICE "3w-xxxx: tw_post_command_packet()\n"); 363 command_que_value = tw_dev->command_packet_physical_address[request_id]; 364 status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev)); 365 366 if (tw_check_bits(status_reg_value)) { 367 dprintk(KERN_WARNING "3w-xxxx: tw_post_command_packet(): Unexpected bits.\n"); 368 tw_decode_bits(tw_dev, status_reg_value, 1); 369 } 370 371 if ((status_reg_value & TW_STATUS_COMMAND_QUEUE_FULL) == 0) { 372 /* We successfully posted the command packet */ 373 outl(command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev)); 374 tw_dev->state[request_id] = TW_S_POSTED; 375 tw_dev->posted_request_count++; 376 if (tw_dev->posted_request_count > tw_dev->max_posted_request_count) { 377 tw_dev->max_posted_request_count = tw_dev->posted_request_count; 378 } 379 } else { 380 /* Couldn't post the command packet, so we do it in the isr */ 381 if (tw_dev->state[request_id] != TW_S_PENDING) { 382 tw_dev->state[request_id] = TW_S_PENDING; 383 tw_dev->pending_request_count++; 384 if (tw_dev->pending_request_count > tw_dev->max_pending_request_count) { 385 tw_dev->max_pending_request_count = tw_dev->pending_request_count; 386 } 387 tw_dev->pending_queue[tw_dev->pending_tail] = request_id; 388 if (tw_dev->pending_tail == TW_Q_LENGTH-1) { 389 tw_dev->pending_tail = TW_Q_START; 390 } else { 391 tw_dev->pending_tail = tw_dev->pending_tail + 1; 392 } 393 } 394 TW_UNMASK_COMMAND_INTERRUPT(tw_dev); 395 return 1; 396 } 397 return 0; 398 } /* End tw_post_command_packet() */ 399 400 /* This function will return valid sense buffer information for failed cmds */ 401 static int tw_decode_sense(TW_Device_Extension *tw_dev, int request_id, int fill_sense) 402 { 403 int i; 404 TW_Command *command; 405 406 dprintk(KERN_WARNING "3w-xxxx: tw_decode_sense()\n"); 407 command = (TW_Command *)tw_dev->command_packet_virtual_address[request_id]; 408 409 printk(KERN_WARNING "3w-xxxx: scsi%d: Command failed: status = 0x%x, flags = 0x%x, unit #%d.\n", tw_dev->host->host_no, command->status, command->flags, TW_UNIT_OUT(command->unit__hostid)); 410 411 /* Attempt to return intelligent sense information */ 412 if (fill_sense) { 413 if ((command->status == 0xc7) || (command->status == 0xcb)) { 414 for (i = 0; i < ARRAY_SIZE(tw_sense_table); i++) { 415 if (command->flags == tw_sense_table[i][0]) { 416 417 /* Valid bit and 'current errors' */ 418 tw_dev->srb[request_id]->sense_buffer[0] = (0x1 << 7 | 0x70); 419 420 /* Sense key */ 421 tw_dev->srb[request_id]->sense_buffer[2] = tw_sense_table[i][1]; 422 423 /* Additional sense length */ 424 tw_dev->srb[request_id]->sense_buffer[7] = 0xa; /* 10 bytes */ 425 426 /* Additional sense code */ 427 tw_dev->srb[request_id]->sense_buffer[12] = tw_sense_table[i][2]; 428 429 /* Additional sense code qualifier */ 430 tw_dev->srb[request_id]->sense_buffer[13] = tw_sense_table[i][3]; 431 432 tw_dev->srb[request_id]->result = (DID_OK << 16) | (CHECK_CONDITION << 1); 433 return TW_ISR_DONT_RESULT; /* Special case for isr to not over-write result */ 434 } 435 } 436 } 437 438 /* If no table match, error so we get a reset */ 439 return 1; 440 } 441 442 return 0; 443 } /* End tw_decode_sense() */ 444 445 /* This function will report controller error status */ 446 static int tw_check_errors(TW_Device_Extension *tw_dev) 447 { 448 u32 status_reg_value; 449 450 status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev)); 451 452 if (TW_STATUS_ERRORS(status_reg_value) || tw_check_bits(status_reg_value)) { 453 tw_decode_bits(tw_dev, status_reg_value, 0); 454 return 1; 455 } 456 457 return 0; 458 } /* End tw_check_errors() */ 459 460 /* This function will empty the response que */ 461 static void tw_empty_response_que(TW_Device_Extension *tw_dev) 462 { 463 u32 status_reg_value, response_que_value; 464 465 status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev)); 466 467 while ((status_reg_value & TW_STATUS_RESPONSE_QUEUE_EMPTY) == 0) { 468 response_que_value = inl(TW_RESPONSE_QUEUE_REG_ADDR(tw_dev)); 469 status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev)); 470 } 471 } /* End tw_empty_response_que() */ 472 473 /* This function will free a request_id */ 474 static void tw_state_request_finish(TW_Device_Extension *tw_dev, int request_id) 475 { 476 tw_dev->free_queue[tw_dev->free_tail] = request_id; 477 tw_dev->state[request_id] = TW_S_FINISHED; 478 tw_dev->free_tail = (tw_dev->free_tail + 1) % TW_Q_LENGTH; 479 } /* End tw_state_request_finish() */ 480 481 /* This function will assign an available request_id */ 482 static void tw_state_request_start(TW_Device_Extension *tw_dev, int *request_id) 483 { 484 *request_id = tw_dev->free_queue[tw_dev->free_head]; 485 tw_dev->free_head = (tw_dev->free_head + 1) % TW_Q_LENGTH; 486 tw_dev->state[*request_id] = TW_S_STARTED; 487 } /* End tw_state_request_start() */ 488 489 /* Show some statistics about the card */ 490 static ssize_t tw_show_stats(struct device *dev, struct device_attribute *attr, 491 char *buf) 492 { 493 struct Scsi_Host *host = class_to_shost(dev); 494 TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata; 495 unsigned long flags = 0; 496 ssize_t len; 497 498 spin_lock_irqsave(tw_dev->host->host_lock, flags); 499 len = snprintf(buf, PAGE_SIZE, "3w-xxxx Driver version: %s\n" 500 "Current commands posted: %4d\n" 501 "Max commands posted: %4d\n" 502 "Current pending commands: %4d\n" 503 "Max pending commands: %4d\n" 504 "Last sgl length: %4d\n" 505 "Max sgl length: %4d\n" 506 "Last sector count: %4d\n" 507 "Max sector count: %4d\n" 508 "SCSI Host Resets: %4d\n" 509 "AEN's: %4d\n", 510 TW_DRIVER_VERSION, 511 tw_dev->posted_request_count, 512 tw_dev->max_posted_request_count, 513 tw_dev->pending_request_count, 514 tw_dev->max_pending_request_count, 515 tw_dev->sgl_entries, 516 tw_dev->max_sgl_entries, 517 tw_dev->sector_count, 518 tw_dev->max_sector_count, 519 tw_dev->num_resets, 520 tw_dev->aen_count); 521 spin_unlock_irqrestore(tw_dev->host->host_lock, flags); 522 return len; 523 } /* End tw_show_stats() */ 524 525 /* Create sysfs 'stats' entry */ 526 static struct device_attribute tw_host_stats_attr = { 527 .attr = { 528 .name = "stats", 529 .mode = S_IRUGO, 530 }, 531 .show = tw_show_stats 532 }; 533 534 /* Host attributes initializer */ 535 static struct device_attribute *tw_host_attrs[] = { 536 &tw_host_stats_attr, 537 NULL, 538 }; 539 540 /* This function will read the aen queue from the isr */ 541 static int tw_aen_read_queue(TW_Device_Extension *tw_dev, int request_id) 542 { 543 TW_Command *command_packet; 544 TW_Param *param; 545 unsigned long command_que_value; 546 u32 status_reg_value; 547 unsigned long param_value = 0; 548 549 dprintk(KERN_NOTICE "3w-xxxx: tw_aen_read_queue()\n"); 550 551 status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev)); 552 if (tw_check_bits(status_reg_value)) { 553 dprintk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Unexpected bits.\n"); 554 tw_decode_bits(tw_dev, status_reg_value, 1); 555 return 1; 556 } 557 if (tw_dev->command_packet_virtual_address[request_id] == NULL) { 558 printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad command packet virtual address.\n"); 559 return 1; 560 } 561 command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id]; 562 memset(command_packet, 0, sizeof(TW_Sector)); 563 command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM); 564 command_packet->size = 4; 565 command_packet->request_id = request_id; 566 command_packet->status = 0; 567 command_packet->flags = 0; 568 command_packet->byte6.parameter_count = 1; 569 command_que_value = tw_dev->command_packet_physical_address[request_id]; 570 if (command_que_value == 0) { 571 printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad command packet physical address.\n"); 572 return 1; 573 } 574 /* Now setup the param */ 575 if (tw_dev->alignment_virtual_address[request_id] == NULL) { 576 printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad alignment virtual address.\n"); 577 return 1; 578 } 579 param = (TW_Param *)tw_dev->alignment_virtual_address[request_id]; 580 memset(param, 0, sizeof(TW_Sector)); 581 param->table_id = 0x401; /* AEN table */ 582 param->parameter_id = 2; /* Unit code */ 583 param->parameter_size_bytes = 2; 584 param_value = tw_dev->alignment_physical_address[request_id]; 585 if (param_value == 0) { 586 printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad alignment physical address.\n"); 587 return 1; 588 } 589 command_packet->byte8.param.sgl[0].address = param_value; 590 command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector); 591 592 /* Now post the command packet */ 593 if ((status_reg_value & TW_STATUS_COMMAND_QUEUE_FULL) == 0) { 594 dprintk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Post succeeded.\n"); 595 tw_dev->srb[request_id] = NULL; /* Flag internal command */ 596 tw_dev->state[request_id] = TW_S_POSTED; 597 outl(command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev)); 598 } else { 599 printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Post failed, will retry.\n"); 600 return 1; 601 } 602 603 return 0; 604 } /* End tw_aen_read_queue() */ 605 606 /* This function will complete an aen request from the isr */ 607 static int tw_aen_complete(TW_Device_Extension *tw_dev, int request_id) 608 { 609 TW_Param *param; 610 unsigned short aen; 611 int error = 0, table_max = 0; 612 613 dprintk(KERN_WARNING "3w-xxxx: tw_aen_complete()\n"); 614 if (tw_dev->alignment_virtual_address[request_id] == NULL) { 615 printk(KERN_WARNING "3w-xxxx: tw_aen_complete(): Bad alignment virtual address.\n"); 616 return 1; 617 } 618 param = (TW_Param *)tw_dev->alignment_virtual_address[request_id]; 619 aen = *(unsigned short *)(param->data); 620 dprintk(KERN_NOTICE "3w-xxxx: tw_aen_complete(): Queue'd code 0x%x\n", aen); 621 622 /* Print some useful info when certain aen codes come out */ 623 if (aen == 0x0ff) { 624 printk(KERN_WARNING "3w-xxxx: scsi%d: AEN: INFO: AEN queue overflow.\n", tw_dev->host->host_no); 625 } else { 626 table_max = ARRAY_SIZE(tw_aen_string); 627 if ((aen & 0x0ff) < table_max) { 628 if ((tw_aen_string[aen & 0xff][strlen(tw_aen_string[aen & 0xff])-1]) == '#') { 629 printk(KERN_WARNING "3w-xxxx: scsi%d: AEN: %s%d.\n", tw_dev->host->host_no, tw_aen_string[aen & 0xff], aen >> 8); 630 } else { 631 if (aen != 0x0) 632 printk(KERN_WARNING "3w-xxxx: scsi%d: AEN: %s.\n", tw_dev->host->host_no, tw_aen_string[aen & 0xff]); 633 } 634 } else { 635 printk(KERN_WARNING "3w-xxxx: scsi%d: Received AEN %d.\n", tw_dev->host->host_no, aen); 636 } 637 } 638 if (aen != TW_AEN_QUEUE_EMPTY) { 639 tw_dev->aen_count++; 640 641 /* Now queue the code */ 642 tw_dev->aen_queue[tw_dev->aen_tail] = aen; 643 if (tw_dev->aen_tail == TW_Q_LENGTH - 1) { 644 tw_dev->aen_tail = TW_Q_START; 645 } else { 646 tw_dev->aen_tail = tw_dev->aen_tail + 1; 647 } 648 if (tw_dev->aen_head == tw_dev->aen_tail) { 649 if (tw_dev->aen_head == TW_Q_LENGTH - 1) { 650 tw_dev->aen_head = TW_Q_START; 651 } else { 652 tw_dev->aen_head = tw_dev->aen_head + 1; 653 } 654 } 655 656 error = tw_aen_read_queue(tw_dev, request_id); 657 if (error) { 658 printk(KERN_WARNING "3w-xxxx: scsi%d: Error completing AEN.\n", tw_dev->host->host_no); 659 tw_dev->state[request_id] = TW_S_COMPLETED; 660 tw_state_request_finish(tw_dev, request_id); 661 } 662 } else { 663 tw_dev->state[request_id] = TW_S_COMPLETED; 664 tw_state_request_finish(tw_dev, request_id); 665 } 666 667 return 0; 668 } /* End tw_aen_complete() */ 669 670 /* This function will drain the aen queue after a soft reset */ 671 static int tw_aen_drain_queue(TW_Device_Extension *tw_dev) 672 { 673 TW_Command *command_packet; 674 TW_Param *param; 675 int request_id = 0; 676 unsigned long command_que_value; 677 unsigned long param_value; 678 TW_Response_Queue response_queue; 679 unsigned short aen; 680 unsigned short aen_code; 681 int finished = 0; 682 int first_reset = 0; 683 int queue = 0; 684 int found = 0, table_max = 0; 685 686 dprintk(KERN_NOTICE "3w-xxxx: tw_aen_drain_queue()\n"); 687 688 if (tw_poll_status(tw_dev, TW_STATUS_ATTENTION_INTERRUPT | TW_STATUS_MICROCONTROLLER_READY, 30)) { 689 dprintk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): No attention interrupt for card %d.\n", tw_device_extension_count); 690 return 1; 691 } 692 TW_CLEAR_ATTENTION_INTERRUPT(tw_dev); 693 694 /* Empty response queue */ 695 tw_empty_response_que(tw_dev); 696 697 /* Initialize command packet */ 698 if (tw_dev->command_packet_virtual_address[request_id] == NULL) { 699 printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad command packet virtual address.\n"); 700 return 1; 701 } 702 command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id]; 703 memset(command_packet, 0, sizeof(TW_Sector)); 704 command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM); 705 command_packet->size = 4; 706 command_packet->request_id = request_id; 707 command_packet->status = 0; 708 command_packet->flags = 0; 709 command_packet->byte6.parameter_count = 1; 710 command_que_value = tw_dev->command_packet_physical_address[request_id]; 711 if (command_que_value == 0) { 712 printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad command packet physical address.\n"); 713 return 1; 714 } 715 716 /* Now setup the param */ 717 if (tw_dev->alignment_virtual_address[request_id] == NULL) { 718 printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad alignment virtual address.\n"); 719 return 1; 720 } 721 param = (TW_Param *)tw_dev->alignment_virtual_address[request_id]; 722 memset(param, 0, sizeof(TW_Sector)); 723 param->table_id = 0x401; /* AEN table */ 724 param->parameter_id = 2; /* Unit code */ 725 param->parameter_size_bytes = 2; 726 param_value = tw_dev->alignment_physical_address[request_id]; 727 if (param_value == 0) { 728 printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad alignment physical address.\n"); 729 return 1; 730 } 731 command_packet->byte8.param.sgl[0].address = param_value; 732 command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector); 733 734 /* Now drain the controller's aen queue */ 735 do { 736 /* Post command packet */ 737 outl(command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev)); 738 739 /* Now poll for completion */ 740 if (tw_poll_status_gone(tw_dev, TW_STATUS_RESPONSE_QUEUE_EMPTY, 30) == 0) { 741 response_queue.value = inl(TW_RESPONSE_QUEUE_REG_ADDR(tw_dev)); 742 request_id = TW_RESID_OUT(response_queue.response_id); 743 744 if (request_id != 0) { 745 /* Unexpected request id */ 746 printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Unexpected request id.\n"); 747 return 1; 748 } 749 750 if (command_packet->status != 0) { 751 if (command_packet->flags != TW_AEN_TABLE_UNDEFINED) { 752 /* Bad response */ 753 tw_decode_sense(tw_dev, request_id, 0); 754 return 1; 755 } else { 756 /* We know this is a 3w-1x00, and doesn't support aen's */ 757 return 0; 758 } 759 } 760 761 /* Now check the aen */ 762 aen = *(unsigned short *)(param->data); 763 aen_code = (aen & 0x0ff); 764 queue = 0; 765 switch (aen_code) { 766 case TW_AEN_QUEUE_EMPTY: 767 dprintk(KERN_WARNING "3w-xxxx: AEN: %s.\n", tw_aen_string[aen & 0xff]); 768 if (first_reset != 1) { 769 return 1; 770 } else { 771 finished = 1; 772 } 773 break; 774 case TW_AEN_SOFT_RESET: 775 if (first_reset == 0) { 776 first_reset = 1; 777 } else { 778 printk(KERN_WARNING "3w-xxxx: AEN: %s.\n", tw_aen_string[aen & 0xff]); 779 tw_dev->aen_count++; 780 queue = 1; 781 } 782 break; 783 default: 784 if (aen == 0x0ff) { 785 printk(KERN_WARNING "3w-xxxx: AEN: INFO: AEN queue overflow.\n"); 786 } else { 787 table_max = ARRAY_SIZE(tw_aen_string); 788 if ((aen & 0x0ff) < table_max) { 789 if ((tw_aen_string[aen & 0xff][strlen(tw_aen_string[aen & 0xff])-1]) == '#') { 790 printk(KERN_WARNING "3w-xxxx: AEN: %s%d.\n", tw_aen_string[aen & 0xff], aen >> 8); 791 } else { 792 printk(KERN_WARNING "3w-xxxx: AEN: %s.\n", tw_aen_string[aen & 0xff]); 793 } 794 } else 795 printk(KERN_WARNING "3w-xxxx: Received AEN %d.\n", aen); 796 } 797 tw_dev->aen_count++; 798 queue = 1; 799 } 800 801 /* Now put the aen on the aen_queue */ 802 if (queue == 1) { 803 tw_dev->aen_queue[tw_dev->aen_tail] = aen; 804 if (tw_dev->aen_tail == TW_Q_LENGTH - 1) { 805 tw_dev->aen_tail = TW_Q_START; 806 } else { 807 tw_dev->aen_tail = tw_dev->aen_tail + 1; 808 } 809 if (tw_dev->aen_head == tw_dev->aen_tail) { 810 if (tw_dev->aen_head == TW_Q_LENGTH - 1) { 811 tw_dev->aen_head = TW_Q_START; 812 } else { 813 tw_dev->aen_head = tw_dev->aen_head + 1; 814 } 815 } 816 } 817 found = 1; 818 } 819 if (found == 0) { 820 printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Response never received.\n"); 821 return 1; 822 } 823 } while (finished == 0); 824 825 return 0; 826 } /* End tw_aen_drain_queue() */ 827 828 /* This function will allocate memory */ 829 static int tw_allocate_memory(TW_Device_Extension *tw_dev, int size, int which) 830 { 831 int i; 832 dma_addr_t dma_handle; 833 unsigned long *cpu_addr = NULL; 834 835 dprintk(KERN_NOTICE "3w-xxxx: tw_allocate_memory()\n"); 836 837 cpu_addr = pci_alloc_consistent(tw_dev->tw_pci_dev, size*TW_Q_LENGTH, &dma_handle); 838 if (cpu_addr == NULL) { 839 printk(KERN_WARNING "3w-xxxx: pci_alloc_consistent() failed.\n"); 840 return 1; 841 } 842 843 if ((unsigned long)cpu_addr % (tw_dev->tw_pci_dev->device == TW_DEVICE_ID ? TW_ALIGNMENT_6000 : TW_ALIGNMENT_7000)) { 844 printk(KERN_WARNING "3w-xxxx: Couldn't allocate correctly aligned memory.\n"); 845 pci_free_consistent(tw_dev->tw_pci_dev, size*TW_Q_LENGTH, cpu_addr, dma_handle); 846 return 1; 847 } 848 849 memset(cpu_addr, 0, size*TW_Q_LENGTH); 850 851 for (i=0;i<TW_Q_LENGTH;i++) { 852 switch(which) { 853 case 0: 854 tw_dev->command_packet_physical_address[i] = dma_handle+(i*size); 855 tw_dev->command_packet_virtual_address[i] = (unsigned long *)((unsigned char *)cpu_addr + (i*size)); 856 break; 857 case 1: 858 tw_dev->alignment_physical_address[i] = dma_handle+(i*size); 859 tw_dev->alignment_virtual_address[i] = (unsigned long *)((unsigned char *)cpu_addr + (i*size)); 860 break; 861 default: 862 printk(KERN_WARNING "3w-xxxx: tw_allocate_memory(): case slip in tw_allocate_memory()\n"); 863 return 1; 864 } 865 } 866 867 return 0; 868 } /* End tw_allocate_memory() */ 869 870 /* This function handles ioctl for the character device */ 871 static long tw_chrdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg) 872 { 873 int request_id; 874 dma_addr_t dma_handle; 875 unsigned short tw_aen_code; 876 unsigned long flags; 877 unsigned int data_buffer_length = 0; 878 unsigned long data_buffer_length_adjusted = 0; 879 struct inode *inode = file_inode(file); 880 unsigned long *cpu_addr; 881 long timeout; 882 TW_New_Ioctl *tw_ioctl; 883 TW_Passthru *passthru; 884 TW_Device_Extension *tw_dev = tw_device_extension_list[iminor(inode)]; 885 int retval = -EFAULT; 886 void __user *argp = (void __user *)arg; 887 888 dprintk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl()\n"); 889 890 mutex_lock(&tw_mutex); 891 /* Only let one of these through at a time */ 892 if (mutex_lock_interruptible(&tw_dev->ioctl_lock)) { 893 mutex_unlock(&tw_mutex); 894 return -EINTR; 895 } 896 897 /* First copy down the buffer length */ 898 if (copy_from_user(&data_buffer_length, argp, sizeof(unsigned int))) 899 goto out; 900 901 /* Check size */ 902 if (data_buffer_length > TW_MAX_IOCTL_SECTORS * 512) { 903 retval = -EINVAL; 904 goto out; 905 } 906 907 /* Hardware can only do multiple of 512 byte transfers */ 908 data_buffer_length_adjusted = (data_buffer_length + 511) & ~511; 909 910 /* Now allocate ioctl buf memory */ 911 cpu_addr = dma_alloc_coherent(&tw_dev->tw_pci_dev->dev, data_buffer_length_adjusted+sizeof(TW_New_Ioctl) - 1, &dma_handle, GFP_KERNEL); 912 if (cpu_addr == NULL) { 913 retval = -ENOMEM; 914 goto out; 915 } 916 917 tw_ioctl = (TW_New_Ioctl *)cpu_addr; 918 919 /* Now copy down the entire ioctl */ 920 if (copy_from_user(tw_ioctl, argp, data_buffer_length + sizeof(TW_New_Ioctl) - 1)) 921 goto out2; 922 923 passthru = (TW_Passthru *)&tw_ioctl->firmware_command; 924 925 /* See which ioctl we are doing */ 926 switch (cmd) { 927 case TW_OP_NOP: 928 dprintk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl(): caught TW_OP_NOP.\n"); 929 break; 930 case TW_OP_AEN_LISTEN: 931 dprintk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl(): caught TW_AEN_LISTEN.\n"); 932 memset(tw_ioctl->data_buffer, 0, data_buffer_length); 933 934 spin_lock_irqsave(tw_dev->host->host_lock, flags); 935 if (tw_dev->aen_head == tw_dev->aen_tail) { 936 tw_aen_code = TW_AEN_QUEUE_EMPTY; 937 } else { 938 tw_aen_code = tw_dev->aen_queue[tw_dev->aen_head]; 939 if (tw_dev->aen_head == TW_Q_LENGTH - 1) { 940 tw_dev->aen_head = TW_Q_START; 941 } else { 942 tw_dev->aen_head = tw_dev->aen_head + 1; 943 } 944 } 945 spin_unlock_irqrestore(tw_dev->host->host_lock, flags); 946 memcpy(tw_ioctl->data_buffer, &tw_aen_code, sizeof(tw_aen_code)); 947 break; 948 case TW_CMD_PACKET_WITH_DATA: 949 dprintk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl(): caught TW_CMD_PACKET_WITH_DATA.\n"); 950 spin_lock_irqsave(tw_dev->host->host_lock, flags); 951 952 tw_state_request_start(tw_dev, &request_id); 953 954 /* Flag internal command */ 955 tw_dev->srb[request_id] = NULL; 956 957 /* Flag chrdev ioctl */ 958 tw_dev->chrdev_request_id = request_id; 959 960 tw_ioctl->firmware_command.request_id = request_id; 961 962 /* Load the sg list */ 963 switch (TW_SGL_OUT(tw_ioctl->firmware_command.opcode__sgloffset)) { 964 case 2: 965 tw_ioctl->firmware_command.byte8.param.sgl[0].address = dma_handle + sizeof(TW_New_Ioctl) - 1; 966 tw_ioctl->firmware_command.byte8.param.sgl[0].length = data_buffer_length_adjusted; 967 break; 968 case 3: 969 tw_ioctl->firmware_command.byte8.io.sgl[0].address = dma_handle + sizeof(TW_New_Ioctl) - 1; 970 tw_ioctl->firmware_command.byte8.io.sgl[0].length = data_buffer_length_adjusted; 971 break; 972 case 5: 973 passthru->sg_list[0].address = dma_handle + sizeof(TW_New_Ioctl) - 1; 974 passthru->sg_list[0].length = data_buffer_length_adjusted; 975 break; 976 } 977 978 memcpy(tw_dev->command_packet_virtual_address[request_id], &(tw_ioctl->firmware_command), sizeof(TW_Command)); 979 980 /* Now post the command packet to the controller */ 981 tw_post_command_packet(tw_dev, request_id); 982 spin_unlock_irqrestore(tw_dev->host->host_lock, flags); 983 984 timeout = TW_IOCTL_CHRDEV_TIMEOUT*HZ; 985 986 /* Now wait for the command to complete */ 987 timeout = wait_event_timeout(tw_dev->ioctl_wqueue, tw_dev->chrdev_request_id == TW_IOCTL_CHRDEV_FREE, timeout); 988 989 /* We timed out, and didn't get an interrupt */ 990 if (tw_dev->chrdev_request_id != TW_IOCTL_CHRDEV_FREE) { 991 /* Now we need to reset the board */ 992 printk(KERN_WARNING "3w-xxxx: scsi%d: Character ioctl (0x%x) timed out, resetting card.\n", tw_dev->host->host_no, cmd); 993 retval = -EIO; 994 if (tw_reset_device_extension(tw_dev)) { 995 printk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl(): Reset failed for card %d.\n", tw_dev->host->host_no); 996 } 997 goto out2; 998 } 999 1000 /* Now copy in the command packet response */ 1001 memcpy(&(tw_ioctl->firmware_command), tw_dev->command_packet_virtual_address[request_id], sizeof(TW_Command)); 1002 1003 /* Now complete the io */ 1004 spin_lock_irqsave(tw_dev->host->host_lock, flags); 1005 tw_dev->posted_request_count--; 1006 tw_dev->state[request_id] = TW_S_COMPLETED; 1007 tw_state_request_finish(tw_dev, request_id); 1008 spin_unlock_irqrestore(tw_dev->host->host_lock, flags); 1009 break; 1010 default: 1011 retval = -ENOTTY; 1012 goto out2; 1013 } 1014 1015 /* Now copy the response to userspace */ 1016 if (copy_to_user(argp, tw_ioctl, sizeof(TW_New_Ioctl) + data_buffer_length - 1)) 1017 goto out2; 1018 retval = 0; 1019 out2: 1020 /* Now free ioctl buf memory */ 1021 dma_free_coherent(&tw_dev->tw_pci_dev->dev, data_buffer_length_adjusted+sizeof(TW_New_Ioctl) - 1, cpu_addr, dma_handle); 1022 out: 1023 mutex_unlock(&tw_dev->ioctl_lock); 1024 mutex_unlock(&tw_mutex); 1025 return retval; 1026 } /* End tw_chrdev_ioctl() */ 1027 1028 /* This function handles open for the character device */ 1029 /* NOTE that this function races with remove. */ 1030 static int tw_chrdev_open(struct inode *inode, struct file *file) 1031 { 1032 unsigned int minor_number; 1033 1034 dprintk(KERN_WARNING "3w-xxxx: tw_ioctl_open()\n"); 1035 1036 minor_number = iminor(inode); 1037 if (minor_number >= tw_device_extension_count) 1038 return -ENODEV; 1039 1040 return 0; 1041 } /* End tw_chrdev_open() */ 1042 1043 /* File operations struct for character device */ 1044 static const struct file_operations tw_fops = { 1045 .owner = THIS_MODULE, 1046 .unlocked_ioctl = tw_chrdev_ioctl, 1047 #ifdef CONFIG_COMPAT 1048 .compat_ioctl = tw_chrdev_ioctl, 1049 #endif 1050 .open = tw_chrdev_open, 1051 .release = NULL, 1052 .llseek = noop_llseek, 1053 }; 1054 1055 /* This function will free up device extension resources */ 1056 static void tw_free_device_extension(TW_Device_Extension *tw_dev) 1057 { 1058 dprintk(KERN_NOTICE "3w-xxxx: tw_free_device_extension()\n"); 1059 1060 /* Free command packet and generic buffer memory */ 1061 if (tw_dev->command_packet_virtual_address[0]) 1062 pci_free_consistent(tw_dev->tw_pci_dev, sizeof(TW_Command)*TW_Q_LENGTH, tw_dev->command_packet_virtual_address[0], tw_dev->command_packet_physical_address[0]); 1063 1064 if (tw_dev->alignment_virtual_address[0]) 1065 pci_free_consistent(tw_dev->tw_pci_dev, sizeof(TW_Sector)*TW_Q_LENGTH, tw_dev->alignment_virtual_address[0], tw_dev->alignment_physical_address[0]); 1066 } /* End tw_free_device_extension() */ 1067 1068 /* This function will send an initconnection command to controller */ 1069 static int tw_initconnection(TW_Device_Extension *tw_dev, int message_credits) 1070 { 1071 unsigned long command_que_value; 1072 TW_Command *command_packet; 1073 TW_Response_Queue response_queue; 1074 int request_id = 0; 1075 1076 dprintk(KERN_NOTICE "3w-xxxx: tw_initconnection()\n"); 1077 1078 /* Initialize InitConnection command packet */ 1079 if (tw_dev->command_packet_virtual_address[request_id] == NULL) { 1080 printk(KERN_WARNING "3w-xxxx: tw_initconnection(): Bad command packet virtual address.\n"); 1081 return 1; 1082 } 1083 1084 command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id]; 1085 memset(command_packet, 0, sizeof(TW_Sector)); 1086 command_packet->opcode__sgloffset = TW_OPSGL_IN(0, TW_OP_INIT_CONNECTION); 1087 command_packet->size = TW_INIT_COMMAND_PACKET_SIZE; 1088 command_packet->request_id = request_id; 1089 command_packet->status = 0x0; 1090 command_packet->flags = 0x0; 1091 command_packet->byte6.message_credits = message_credits; 1092 command_packet->byte8.init_connection.response_queue_pointer = 0x0; 1093 command_que_value = tw_dev->command_packet_physical_address[request_id]; 1094 1095 if (command_que_value == 0) { 1096 printk(KERN_WARNING "3w-xxxx: tw_initconnection(): Bad command packet physical address.\n"); 1097 return 1; 1098 } 1099 1100 /* Send command packet to the board */ 1101 outl(command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev)); 1102 1103 /* Poll for completion */ 1104 if (tw_poll_status_gone(tw_dev, TW_STATUS_RESPONSE_QUEUE_EMPTY, 30) == 0) { 1105 response_queue.value = inl(TW_RESPONSE_QUEUE_REG_ADDR(tw_dev)); 1106 request_id = TW_RESID_OUT(response_queue.response_id); 1107 1108 if (request_id != 0) { 1109 /* unexpected request id */ 1110 printk(KERN_WARNING "3w-xxxx: tw_initconnection(): Unexpected request id.\n"); 1111 return 1; 1112 } 1113 if (command_packet->status != 0) { 1114 /* bad response */ 1115 tw_decode_sense(tw_dev, request_id, 0); 1116 return 1; 1117 } 1118 } 1119 return 0; 1120 } /* End tw_initconnection() */ 1121 1122 /* Set a value in the features table */ 1123 static int tw_setfeature(TW_Device_Extension *tw_dev, int parm, int param_size, 1124 unsigned char *val) 1125 { 1126 TW_Param *param; 1127 TW_Command *command_packet; 1128 TW_Response_Queue response_queue; 1129 int request_id = 0; 1130 unsigned long command_que_value; 1131 unsigned long param_value; 1132 1133 /* Initialize SetParam command packet */ 1134 if (tw_dev->command_packet_virtual_address[request_id] == NULL) { 1135 printk(KERN_WARNING "3w-xxxx: tw_setfeature(): Bad command packet virtual address.\n"); 1136 return 1; 1137 } 1138 command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id]; 1139 memset(command_packet, 0, sizeof(TW_Sector)); 1140 param = (TW_Param *)tw_dev->alignment_virtual_address[request_id]; 1141 1142 command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_SET_PARAM); 1143 param->table_id = 0x404; /* Features table */ 1144 param->parameter_id = parm; 1145 param->parameter_size_bytes = param_size; 1146 memcpy(param->data, val, param_size); 1147 1148 param_value = tw_dev->alignment_physical_address[request_id]; 1149 if (param_value == 0) { 1150 printk(KERN_WARNING "3w-xxxx: tw_setfeature(): Bad alignment physical address.\n"); 1151 tw_dev->state[request_id] = TW_S_COMPLETED; 1152 tw_state_request_finish(tw_dev, request_id); 1153 tw_dev->srb[request_id]->result = (DID_OK << 16); 1154 tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]); 1155 } 1156 command_packet->byte8.param.sgl[0].address = param_value; 1157 command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector); 1158 1159 command_packet->size = 4; 1160 command_packet->request_id = request_id; 1161 command_packet->byte6.parameter_count = 1; 1162 1163 command_que_value = tw_dev->command_packet_physical_address[request_id]; 1164 if (command_que_value == 0) { 1165 printk(KERN_WARNING "3w-xxxx: tw_setfeature(): Bad command packet physical address.\n"); 1166 return 1; 1167 } 1168 1169 /* Send command packet to the board */ 1170 outl(command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev)); 1171 1172 /* Poll for completion */ 1173 if (tw_poll_status_gone(tw_dev, TW_STATUS_RESPONSE_QUEUE_EMPTY, 30) == 0) { 1174 response_queue.value = inl(TW_RESPONSE_QUEUE_REG_ADDR(tw_dev)); 1175 request_id = TW_RESID_OUT(response_queue.response_id); 1176 1177 if (request_id != 0) { 1178 /* unexpected request id */ 1179 printk(KERN_WARNING "3w-xxxx: tw_setfeature(): Unexpected request id.\n"); 1180 return 1; 1181 } 1182 if (command_packet->status != 0) { 1183 /* bad response */ 1184 tw_decode_sense(tw_dev, request_id, 0); 1185 return 1; 1186 } 1187 } 1188 1189 return 0; 1190 } /* End tw_setfeature() */ 1191 1192 /* This function will reset a controller */ 1193 static int tw_reset_sequence(TW_Device_Extension *tw_dev) 1194 { 1195 int error = 0; 1196 int tries = 0; 1197 unsigned char c = 1; 1198 1199 /* Reset the board */ 1200 while (tries < TW_MAX_RESET_TRIES) { 1201 TW_SOFT_RESET(tw_dev); 1202 1203 error = tw_aen_drain_queue(tw_dev); 1204 if (error) { 1205 printk(KERN_WARNING "3w-xxxx: scsi%d: AEN drain failed, retrying.\n", tw_dev->host->host_no); 1206 tries++; 1207 continue; 1208 } 1209 1210 /* Check for controller errors */ 1211 if (tw_check_errors(tw_dev)) { 1212 printk(KERN_WARNING "3w-xxxx: scsi%d: Controller errors found, retrying.\n", tw_dev->host->host_no); 1213 tries++; 1214 continue; 1215 } 1216 1217 /* Now the controller is in a good state */ 1218 break; 1219 } 1220 1221 if (tries >= TW_MAX_RESET_TRIES) { 1222 printk(KERN_WARNING "3w-xxxx: scsi%d: Controller errors, card not responding, check all cabling.\n", tw_dev->host->host_no); 1223 return 1; 1224 } 1225 1226 error = tw_initconnection(tw_dev, TW_INIT_MESSAGE_CREDITS); 1227 if (error) { 1228 printk(KERN_WARNING "3w-xxxx: scsi%d: Connection initialization failed.\n", tw_dev->host->host_no); 1229 return 1; 1230 } 1231 1232 error = tw_setfeature(tw_dev, 2, 1, &c); 1233 if (error) { 1234 printk(KERN_WARNING "3w-xxxx: Unable to set features for card, probable old firmware or card.\n"); 1235 } 1236 1237 return 0; 1238 } /* End tw_reset_sequence() */ 1239 1240 /* This function will initialize the fields of a device extension */ 1241 static int tw_initialize_device_extension(TW_Device_Extension *tw_dev) 1242 { 1243 int i, error=0; 1244 1245 dprintk(KERN_NOTICE "3w-xxxx: tw_initialize_device_extension()\n"); 1246 1247 /* Initialize command packet buffers */ 1248 error = tw_allocate_memory(tw_dev, sizeof(TW_Command), 0); 1249 if (error) { 1250 printk(KERN_WARNING "3w-xxxx: Command packet memory allocation failed.\n"); 1251 return 1; 1252 } 1253 1254 /* Initialize generic buffer */ 1255 error = tw_allocate_memory(tw_dev, sizeof(TW_Sector), 1); 1256 if (error) { 1257 printk(KERN_WARNING "3w-xxxx: Generic memory allocation failed.\n"); 1258 return 1; 1259 } 1260 1261 for (i=0;i<TW_Q_LENGTH;i++) { 1262 tw_dev->free_queue[i] = i; 1263 tw_dev->state[i] = TW_S_INITIAL; 1264 } 1265 1266 tw_dev->pending_head = TW_Q_START; 1267 tw_dev->pending_tail = TW_Q_START; 1268 tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE; 1269 1270 mutex_init(&tw_dev->ioctl_lock); 1271 init_waitqueue_head(&tw_dev->ioctl_wqueue); 1272 1273 return 0; 1274 } /* End tw_initialize_device_extension() */ 1275 1276 /* This function will reset a device extension */ 1277 static int tw_reset_device_extension(TW_Device_Extension *tw_dev) 1278 { 1279 int i = 0; 1280 struct scsi_cmnd *srb; 1281 unsigned long flags = 0; 1282 1283 dprintk(KERN_NOTICE "3w-xxxx: tw_reset_device_extension()\n"); 1284 1285 set_bit(TW_IN_RESET, &tw_dev->flags); 1286 TW_DISABLE_INTERRUPTS(tw_dev); 1287 TW_MASK_COMMAND_INTERRUPT(tw_dev); 1288 spin_lock_irqsave(tw_dev->host->host_lock, flags); 1289 1290 /* Abort all requests that are in progress */ 1291 for (i=0;i<TW_Q_LENGTH;i++) { 1292 if ((tw_dev->state[i] != TW_S_FINISHED) && 1293 (tw_dev->state[i] != TW_S_INITIAL) && 1294 (tw_dev->state[i] != TW_S_COMPLETED)) { 1295 srb = tw_dev->srb[i]; 1296 if (srb != NULL) { 1297 srb->result = (DID_RESET << 16); 1298 scsi_dma_unmap(srb); 1299 srb->scsi_done(srb); 1300 } 1301 } 1302 } 1303 1304 /* Reset queues and counts */ 1305 for (i=0;i<TW_Q_LENGTH;i++) { 1306 tw_dev->free_queue[i] = i; 1307 tw_dev->state[i] = TW_S_INITIAL; 1308 } 1309 tw_dev->free_head = TW_Q_START; 1310 tw_dev->free_tail = TW_Q_START; 1311 tw_dev->posted_request_count = 0; 1312 tw_dev->pending_request_count = 0; 1313 tw_dev->pending_head = TW_Q_START; 1314 tw_dev->pending_tail = TW_Q_START; 1315 tw_dev->reset_print = 0; 1316 1317 spin_unlock_irqrestore(tw_dev->host->host_lock, flags); 1318 1319 if (tw_reset_sequence(tw_dev)) { 1320 printk(KERN_WARNING "3w-xxxx: scsi%d: Reset sequence failed.\n", tw_dev->host->host_no); 1321 return 1; 1322 } 1323 1324 TW_ENABLE_AND_CLEAR_INTERRUPTS(tw_dev); 1325 clear_bit(TW_IN_RESET, &tw_dev->flags); 1326 tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE; 1327 1328 return 0; 1329 } /* End tw_reset_device_extension() */ 1330 1331 /* This funciton returns unit geometry in cylinders/heads/sectors */ 1332 static int tw_scsi_biosparam(struct scsi_device *sdev, struct block_device *bdev, 1333 sector_t capacity, int geom[]) 1334 { 1335 int heads, sectors, cylinders; 1336 TW_Device_Extension *tw_dev; 1337 1338 dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_biosparam()\n"); 1339 tw_dev = (TW_Device_Extension *)sdev->host->hostdata; 1340 1341 heads = 64; 1342 sectors = 32; 1343 cylinders = sector_div(capacity, heads * sectors); 1344 1345 if (capacity >= 0x200000) { 1346 heads = 255; 1347 sectors = 63; 1348 cylinders = sector_div(capacity, heads * sectors); 1349 } 1350 1351 dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_biosparam(): heads = %d, sectors = %d, cylinders = %d\n", heads, sectors, cylinders); 1352 geom[0] = heads; 1353 geom[1] = sectors; 1354 geom[2] = cylinders; 1355 1356 return 0; 1357 } /* End tw_scsi_biosparam() */ 1358 1359 /* This is the new scsi eh reset function */ 1360 static int tw_scsi_eh_reset(struct scsi_cmnd *SCpnt) 1361 { 1362 TW_Device_Extension *tw_dev=NULL; 1363 int retval = FAILED; 1364 1365 tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata; 1366 1367 tw_dev->num_resets++; 1368 1369 sdev_printk(KERN_WARNING, SCpnt->device, 1370 "WARNING: Command (0x%x) timed out, resetting card.\n", 1371 SCpnt->cmnd[0]); 1372 1373 /* Make sure we are not issuing an ioctl or resetting from ioctl */ 1374 mutex_lock(&tw_dev->ioctl_lock); 1375 1376 /* Now reset the card and some of the device extension data */ 1377 if (tw_reset_device_extension(tw_dev)) { 1378 printk(KERN_WARNING "3w-xxxx: scsi%d: Reset failed.\n", tw_dev->host->host_no); 1379 goto out; 1380 } 1381 1382 retval = SUCCESS; 1383 out: 1384 mutex_unlock(&tw_dev->ioctl_lock); 1385 return retval; 1386 } /* End tw_scsi_eh_reset() */ 1387 1388 /* This function handles scsi inquiry commands */ 1389 static int tw_scsiop_inquiry(TW_Device_Extension *tw_dev, int request_id) 1390 { 1391 TW_Param *param; 1392 TW_Command *command_packet; 1393 unsigned long command_que_value; 1394 unsigned long param_value; 1395 1396 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_inquiry()\n"); 1397 1398 /* Initialize command packet */ 1399 command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id]; 1400 if (command_packet == NULL) { 1401 printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad command packet virtual address.\n"); 1402 return 1; 1403 } 1404 memset(command_packet, 0, sizeof(TW_Sector)); 1405 command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM); 1406 command_packet->size = 4; 1407 command_packet->request_id = request_id; 1408 command_packet->status = 0; 1409 command_packet->flags = 0; 1410 command_packet->byte6.parameter_count = 1; 1411 1412 /* Now setup the param */ 1413 if (tw_dev->alignment_virtual_address[request_id] == NULL) { 1414 printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad alignment virtual address.\n"); 1415 return 1; 1416 } 1417 param = (TW_Param *)tw_dev->alignment_virtual_address[request_id]; 1418 memset(param, 0, sizeof(TW_Sector)); 1419 param->table_id = 3; /* unit summary table */ 1420 param->parameter_id = 3; /* unitsstatus parameter */ 1421 param->parameter_size_bytes = TW_MAX_UNITS; 1422 param_value = tw_dev->alignment_physical_address[request_id]; 1423 if (param_value == 0) { 1424 printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad alignment physical address.\n"); 1425 return 1; 1426 } 1427 1428 command_packet->byte8.param.sgl[0].address = param_value; 1429 command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector); 1430 command_que_value = tw_dev->command_packet_physical_address[request_id]; 1431 if (command_que_value == 0) { 1432 printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad command packet physical address.\n"); 1433 return 1; 1434 } 1435 1436 /* Now try to post the command packet */ 1437 tw_post_command_packet(tw_dev, request_id); 1438 1439 return 0; 1440 } /* End tw_scsiop_inquiry() */ 1441 1442 static void tw_transfer_internal(TW_Device_Extension *tw_dev, int request_id, 1443 void *data, unsigned int len) 1444 { 1445 scsi_sg_copy_from_buffer(tw_dev->srb[request_id], data, len); 1446 } 1447 1448 /* This function is called by the isr to complete an inquiry command */ 1449 static int tw_scsiop_inquiry_complete(TW_Device_Extension *tw_dev, int request_id) 1450 { 1451 unsigned char *is_unit_present; 1452 unsigned char request_buffer[36]; 1453 TW_Param *param; 1454 1455 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_inquiry_complete()\n"); 1456 1457 memset(request_buffer, 0, sizeof(request_buffer)); 1458 request_buffer[0] = TYPE_DISK; /* Peripheral device type */ 1459 request_buffer[1] = 0; /* Device type modifier */ 1460 request_buffer[2] = 0; /* No ansi/iso compliance */ 1461 request_buffer[4] = 31; /* Additional length */ 1462 memcpy(&request_buffer[8], "3ware ", 8); /* Vendor ID */ 1463 sprintf(&request_buffer[16], "Logical Disk %-2d ", tw_dev->srb[request_id]->device->id); 1464 memcpy(&request_buffer[32], TW_DRIVER_VERSION, 3); 1465 tw_transfer_internal(tw_dev, request_id, request_buffer, 1466 sizeof(request_buffer)); 1467 1468 param = (TW_Param *)tw_dev->alignment_virtual_address[request_id]; 1469 if (param == NULL) { 1470 printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry_complete(): Bad alignment virtual address.\n"); 1471 return 1; 1472 } 1473 is_unit_present = &(param->data[0]); 1474 1475 if (is_unit_present[tw_dev->srb[request_id]->device->id] & TW_UNIT_ONLINE) { 1476 tw_dev->is_unit_present[tw_dev->srb[request_id]->device->id] = 1; 1477 } else { 1478 tw_dev->is_unit_present[tw_dev->srb[request_id]->device->id] = 0; 1479 tw_dev->srb[request_id]->result = (DID_BAD_TARGET << 16); 1480 return TW_ISR_DONT_RESULT; 1481 } 1482 1483 return 0; 1484 } /* End tw_scsiop_inquiry_complete() */ 1485 1486 /* This function handles scsi mode_sense commands */ 1487 static int tw_scsiop_mode_sense(TW_Device_Extension *tw_dev, int request_id) 1488 { 1489 TW_Param *param; 1490 TW_Command *command_packet; 1491 unsigned long command_que_value; 1492 unsigned long param_value; 1493 1494 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_mode_sense()\n"); 1495 1496 /* Only page control = 0, page code = 0x8 (cache page) supported */ 1497 if (tw_dev->srb[request_id]->cmnd[2] != 0x8) { 1498 tw_dev->state[request_id] = TW_S_COMPLETED; 1499 tw_state_request_finish(tw_dev, request_id); 1500 tw_dev->srb[request_id]->result = (DID_OK << 16); 1501 tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]); 1502 return 0; 1503 } 1504 1505 /* Now read firmware cache setting for this unit */ 1506 command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id]; 1507 if (command_packet == NULL) { 1508 printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense(): Bad command packet virtual address.\n"); 1509 return 1; 1510 } 1511 1512 /* Setup the command packet */ 1513 memset(command_packet, 0, sizeof(TW_Sector)); 1514 command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM); 1515 command_packet->size = 4; 1516 command_packet->request_id = request_id; 1517 command_packet->status = 0; 1518 command_packet->flags = 0; 1519 command_packet->byte6.parameter_count = 1; 1520 1521 /* Setup the param */ 1522 if (tw_dev->alignment_virtual_address[request_id] == NULL) { 1523 printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense(): Bad alignment virtual address.\n"); 1524 return 1; 1525 } 1526 1527 param = (TW_Param *)tw_dev->alignment_virtual_address[request_id]; 1528 memset(param, 0, sizeof(TW_Sector)); 1529 param->table_id = TW_UNIT_INFORMATION_TABLE_BASE + tw_dev->srb[request_id]->device->id; 1530 param->parameter_id = 7; /* unit flags */ 1531 param->parameter_size_bytes = 1; 1532 param_value = tw_dev->alignment_physical_address[request_id]; 1533 if (param_value == 0) { 1534 printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense(): Bad alignment physical address.\n"); 1535 return 1; 1536 } 1537 1538 command_packet->byte8.param.sgl[0].address = param_value; 1539 command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector); 1540 command_que_value = tw_dev->command_packet_physical_address[request_id]; 1541 if (command_que_value == 0) { 1542 printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense(): Bad command packet physical address.\n"); 1543 return 1; 1544 } 1545 1546 /* Now try to post the command packet */ 1547 tw_post_command_packet(tw_dev, request_id); 1548 1549 return 0; 1550 } /* End tw_scsiop_mode_sense() */ 1551 1552 /* This function is called by the isr to complete a mode sense command */ 1553 static int tw_scsiop_mode_sense_complete(TW_Device_Extension *tw_dev, int request_id) 1554 { 1555 TW_Param *param; 1556 unsigned char *flags; 1557 unsigned char request_buffer[8]; 1558 1559 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_mode_sense_complete()\n"); 1560 1561 param = (TW_Param *)tw_dev->alignment_virtual_address[request_id]; 1562 if (param == NULL) { 1563 printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense_complete(): Bad alignment virtual address.\n"); 1564 return 1; 1565 } 1566 flags = (char *)&(param->data[0]); 1567 memset(request_buffer, 0, sizeof(request_buffer)); 1568 1569 request_buffer[0] = 0xf; /* mode data length */ 1570 request_buffer[1] = 0; /* default medium type */ 1571 request_buffer[2] = 0x10; /* dpo/fua support on */ 1572 request_buffer[3] = 0; /* no block descriptors */ 1573 request_buffer[4] = 0x8; /* caching page */ 1574 request_buffer[5] = 0xa; /* page length */ 1575 if (*flags & 0x1) 1576 request_buffer[6] = 0x5; /* WCE on, RCD on */ 1577 else 1578 request_buffer[6] = 0x1; /* WCE off, RCD on */ 1579 tw_transfer_internal(tw_dev, request_id, request_buffer, 1580 sizeof(request_buffer)); 1581 1582 return 0; 1583 } /* End tw_scsiop_mode_sense_complete() */ 1584 1585 /* This function handles scsi read_capacity commands */ 1586 static int tw_scsiop_read_capacity(TW_Device_Extension *tw_dev, int request_id) 1587 { 1588 TW_Param *param; 1589 TW_Command *command_packet; 1590 unsigned long command_que_value; 1591 unsigned long param_value; 1592 1593 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity()\n"); 1594 1595 /* Initialize command packet */ 1596 command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id]; 1597 1598 if (command_packet == NULL) { 1599 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity(): Bad command packet virtual address.\n"); 1600 return 1; 1601 } 1602 memset(command_packet, 0, sizeof(TW_Sector)); 1603 command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM); 1604 command_packet->size = 4; 1605 command_packet->request_id = request_id; 1606 command_packet->unit__hostid = TW_UNITHOST_IN(0, tw_dev->srb[request_id]->device->id); 1607 command_packet->status = 0; 1608 command_packet->flags = 0; 1609 command_packet->byte6.block_count = 1; 1610 1611 /* Now setup the param */ 1612 if (tw_dev->alignment_virtual_address[request_id] == NULL) { 1613 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity(): Bad alignment virtual address.\n"); 1614 return 1; 1615 } 1616 param = (TW_Param *)tw_dev->alignment_virtual_address[request_id]; 1617 memset(param, 0, sizeof(TW_Sector)); 1618 param->table_id = TW_UNIT_INFORMATION_TABLE_BASE + 1619 tw_dev->srb[request_id]->device->id; 1620 param->parameter_id = 4; /* unitcapacity parameter */ 1621 param->parameter_size_bytes = 4; 1622 param_value = tw_dev->alignment_physical_address[request_id]; 1623 if (param_value == 0) { 1624 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity(): Bad alignment physical address.\n"); 1625 return 1; 1626 } 1627 1628 command_packet->byte8.param.sgl[0].address = param_value; 1629 command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector); 1630 command_que_value = tw_dev->command_packet_physical_address[request_id]; 1631 if (command_que_value == 0) { 1632 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity(): Bad command packet physical address.\n"); 1633 return 1; 1634 } 1635 1636 /* Now try to post the command to the board */ 1637 tw_post_command_packet(tw_dev, request_id); 1638 1639 return 0; 1640 } /* End tw_scsiop_read_capacity() */ 1641 1642 /* This function is called by the isr to complete a readcapacity command */ 1643 static int tw_scsiop_read_capacity_complete(TW_Device_Extension *tw_dev, int request_id) 1644 { 1645 unsigned char *param_data; 1646 u32 capacity; 1647 char buff[8]; 1648 TW_Param *param; 1649 1650 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity_complete()\n"); 1651 1652 memset(buff, 0, sizeof(buff)); 1653 param = (TW_Param *)tw_dev->alignment_virtual_address[request_id]; 1654 if (param == NULL) { 1655 printk(KERN_WARNING "3w-xxxx: tw_scsiop_read_capacity_complete(): Bad alignment virtual address.\n"); 1656 return 1; 1657 } 1658 param_data = &(param->data[0]); 1659 1660 capacity = (param_data[3] << 24) | (param_data[2] << 16) | 1661 (param_data[1] << 8) | param_data[0]; 1662 1663 /* Subtract one sector to fix get last sector ioctl */ 1664 capacity -= 1; 1665 1666 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity_complete(): Capacity = 0x%x.\n", capacity); 1667 1668 /* Number of LBA's */ 1669 buff[0] = (capacity >> 24); 1670 buff[1] = (capacity >> 16) & 0xff; 1671 buff[2] = (capacity >> 8) & 0xff; 1672 buff[3] = capacity & 0xff; 1673 1674 /* Block size in bytes (512) */ 1675 buff[4] = (TW_BLOCK_SIZE >> 24); 1676 buff[5] = (TW_BLOCK_SIZE >> 16) & 0xff; 1677 buff[6] = (TW_BLOCK_SIZE >> 8) & 0xff; 1678 buff[7] = TW_BLOCK_SIZE & 0xff; 1679 1680 tw_transfer_internal(tw_dev, request_id, buff, sizeof(buff)); 1681 1682 return 0; 1683 } /* End tw_scsiop_read_capacity_complete() */ 1684 1685 /* This function handles scsi read or write commands */ 1686 static int tw_scsiop_read_write(TW_Device_Extension *tw_dev, int request_id) 1687 { 1688 TW_Command *command_packet; 1689 unsigned long command_que_value; 1690 u32 lba = 0x0, num_sectors = 0x0; 1691 int i, use_sg; 1692 struct scsi_cmnd *srb; 1693 struct scatterlist *sglist, *sg; 1694 1695 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_write()\n"); 1696 1697 srb = tw_dev->srb[request_id]; 1698 1699 sglist = scsi_sglist(srb); 1700 if (!sglist) { 1701 printk(KERN_WARNING "3w-xxxx: tw_scsiop_read_write(): Request buffer NULL.\n"); 1702 return 1; 1703 } 1704 1705 /* Initialize command packet */ 1706 command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id]; 1707 if (command_packet == NULL) { 1708 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_write(): Bad command packet virtual address.\n"); 1709 return 1; 1710 } 1711 1712 if (srb->cmnd[0] == READ_6 || srb->cmnd[0] == READ_10) { 1713 command_packet->opcode__sgloffset = TW_OPSGL_IN(3, TW_OP_READ); 1714 } else { 1715 command_packet->opcode__sgloffset = TW_OPSGL_IN(3, TW_OP_WRITE); 1716 } 1717 1718 command_packet->size = 3; 1719 command_packet->request_id = request_id; 1720 command_packet->unit__hostid = TW_UNITHOST_IN(0, srb->device->id); 1721 command_packet->status = 0; 1722 command_packet->flags = 0; 1723 1724 if (srb->cmnd[0] == WRITE_10) { 1725 if ((srb->cmnd[1] & 0x8) || (srb->cmnd[1] & 0x10)) 1726 command_packet->flags = 1; 1727 } 1728 1729 if (srb->cmnd[0] == READ_6 || srb->cmnd[0] == WRITE_6) { 1730 lba = ((u32)srb->cmnd[1] << 16) | ((u32)srb->cmnd[2] << 8) | (u32)srb->cmnd[3]; 1731 num_sectors = (u32)srb->cmnd[4]; 1732 } else { 1733 lba = ((u32)srb->cmnd[2] << 24) | ((u32)srb->cmnd[3] << 16) | ((u32)srb->cmnd[4] << 8) | (u32)srb->cmnd[5]; 1734 num_sectors = (u32)srb->cmnd[8] | ((u32)srb->cmnd[7] << 8); 1735 } 1736 1737 /* Update sector statistic */ 1738 tw_dev->sector_count = num_sectors; 1739 if (tw_dev->sector_count > tw_dev->max_sector_count) 1740 tw_dev->max_sector_count = tw_dev->sector_count; 1741 1742 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_write(): lba = 0x%x num_sectors = 0x%x\n", lba, num_sectors); 1743 command_packet->byte8.io.lba = lba; 1744 command_packet->byte6.block_count = num_sectors; 1745 1746 use_sg = scsi_dma_map(srb); 1747 if (use_sg <= 0) 1748 return 1; 1749 1750 scsi_for_each_sg(tw_dev->srb[request_id], sg, use_sg, i) { 1751 command_packet->byte8.io.sgl[i].address = sg_dma_address(sg); 1752 command_packet->byte8.io.sgl[i].length = sg_dma_len(sg); 1753 command_packet->size+=2; 1754 } 1755 1756 /* Update SG statistics */ 1757 tw_dev->sgl_entries = scsi_sg_count(tw_dev->srb[request_id]); 1758 if (tw_dev->sgl_entries > tw_dev->max_sgl_entries) 1759 tw_dev->max_sgl_entries = tw_dev->sgl_entries; 1760 1761 command_que_value = tw_dev->command_packet_physical_address[request_id]; 1762 if (command_que_value == 0) { 1763 dprintk(KERN_WARNING "3w-xxxx: tw_scsiop_read_write(): Bad command packet physical address.\n"); 1764 return 1; 1765 } 1766 1767 /* Now try to post the command to the board */ 1768 tw_post_command_packet(tw_dev, request_id); 1769 1770 return 0; 1771 } /* End tw_scsiop_read_write() */ 1772 1773 /* This function will handle the request sense scsi command */ 1774 static int tw_scsiop_request_sense(TW_Device_Extension *tw_dev, int request_id) 1775 { 1776 char request_buffer[18]; 1777 1778 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_request_sense()\n"); 1779 1780 memset(request_buffer, 0, sizeof(request_buffer)); 1781 request_buffer[0] = 0x70; /* Immediate fixed format */ 1782 request_buffer[7] = 10; /* minimum size per SPC: 18 bytes */ 1783 /* leave all other fields zero, giving effectively NO_SENSE return */ 1784 tw_transfer_internal(tw_dev, request_id, request_buffer, 1785 sizeof(request_buffer)); 1786 1787 tw_dev->state[request_id] = TW_S_COMPLETED; 1788 tw_state_request_finish(tw_dev, request_id); 1789 1790 /* If we got a request_sense, we probably want a reset, return error */ 1791 tw_dev->srb[request_id]->result = (DID_ERROR << 16); 1792 tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]); 1793 1794 return 0; 1795 } /* End tw_scsiop_request_sense() */ 1796 1797 /* This function will handle synchronize cache scsi command */ 1798 static int tw_scsiop_synchronize_cache(TW_Device_Extension *tw_dev, int request_id) 1799 { 1800 TW_Command *command_packet; 1801 unsigned long command_que_value; 1802 1803 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_synchronize_cache()\n"); 1804 1805 /* Send firmware flush command for this unit */ 1806 command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id]; 1807 if (command_packet == NULL) { 1808 printk(KERN_WARNING "3w-xxxx: tw_scsiop_synchronize_cache(): Bad command packet virtual address.\n"); 1809 return 1; 1810 } 1811 1812 /* Setup the command packet */ 1813 memset(command_packet, 0, sizeof(TW_Sector)); 1814 command_packet->opcode__sgloffset = TW_OPSGL_IN(0, TW_OP_FLUSH_CACHE); 1815 command_packet->size = 2; 1816 command_packet->request_id = request_id; 1817 command_packet->unit__hostid = TW_UNITHOST_IN(0, tw_dev->srb[request_id]->device->id); 1818 command_packet->status = 0; 1819 command_packet->flags = 0; 1820 command_packet->byte6.parameter_count = 1; 1821 command_que_value = tw_dev->command_packet_physical_address[request_id]; 1822 if (command_que_value == 0) { 1823 printk(KERN_WARNING "3w-xxxx: tw_scsiop_synchronize_cache(): Bad command packet physical address.\n"); 1824 return 1; 1825 } 1826 1827 /* Now try to post the command packet */ 1828 tw_post_command_packet(tw_dev, request_id); 1829 1830 return 0; 1831 } /* End tw_scsiop_synchronize_cache() */ 1832 1833 /* This function will handle test unit ready scsi command */ 1834 static int tw_scsiop_test_unit_ready(TW_Device_Extension *tw_dev, int request_id) 1835 { 1836 TW_Param *param; 1837 TW_Command *command_packet; 1838 unsigned long command_que_value; 1839 unsigned long param_value; 1840 1841 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_test_unit_ready()\n"); 1842 1843 /* Initialize command packet */ 1844 command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id]; 1845 if (command_packet == NULL) { 1846 printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready(): Bad command packet virtual address.\n"); 1847 return 1; 1848 } 1849 memset(command_packet, 0, sizeof(TW_Sector)); 1850 command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM); 1851 command_packet->size = 4; 1852 command_packet->request_id = request_id; 1853 command_packet->status = 0; 1854 command_packet->flags = 0; 1855 command_packet->byte6.parameter_count = 1; 1856 1857 /* Now setup the param */ 1858 if (tw_dev->alignment_virtual_address[request_id] == NULL) { 1859 printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready(): Bad alignment virtual address.\n"); 1860 return 1; 1861 } 1862 param = (TW_Param *)tw_dev->alignment_virtual_address[request_id]; 1863 memset(param, 0, sizeof(TW_Sector)); 1864 param->table_id = 3; /* unit summary table */ 1865 param->parameter_id = 3; /* unitsstatus parameter */ 1866 param->parameter_size_bytes = TW_MAX_UNITS; 1867 param_value = tw_dev->alignment_physical_address[request_id]; 1868 if (param_value == 0) { 1869 printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready(): Bad alignment physical address.\n"); 1870 return 1; 1871 } 1872 1873 command_packet->byte8.param.sgl[0].address = param_value; 1874 command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector); 1875 command_que_value = tw_dev->command_packet_physical_address[request_id]; 1876 if (command_que_value == 0) { 1877 printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready(): Bad command packet physical address.\n"); 1878 return 1; 1879 } 1880 1881 /* Now try to post the command packet */ 1882 tw_post_command_packet(tw_dev, request_id); 1883 1884 return 0; 1885 } /* End tw_scsiop_test_unit_ready() */ 1886 1887 /* This function is called by the isr to complete a testunitready command */ 1888 static int tw_scsiop_test_unit_ready_complete(TW_Device_Extension *tw_dev, int request_id) 1889 { 1890 unsigned char *is_unit_present; 1891 TW_Param *param; 1892 1893 dprintk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready_complete()\n"); 1894 1895 param = (TW_Param *)tw_dev->alignment_virtual_address[request_id]; 1896 if (param == NULL) { 1897 printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready_complete(): Bad alignment virtual address.\n"); 1898 return 1; 1899 } 1900 is_unit_present = &(param->data[0]); 1901 1902 if (is_unit_present[tw_dev->srb[request_id]->device->id] & TW_UNIT_ONLINE) { 1903 tw_dev->is_unit_present[tw_dev->srb[request_id]->device->id] = 1; 1904 } else { 1905 tw_dev->is_unit_present[tw_dev->srb[request_id]->device->id] = 0; 1906 tw_dev->srb[request_id]->result = (DID_BAD_TARGET << 16); 1907 return TW_ISR_DONT_RESULT; 1908 } 1909 1910 return 0; 1911 } /* End tw_scsiop_test_unit_ready_complete() */ 1912 1913 /* This is the main scsi queue function to handle scsi opcodes */ 1914 static int tw_scsi_queue_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) 1915 { 1916 unsigned char *command = SCpnt->cmnd; 1917 int request_id = 0; 1918 int retval = 1; 1919 TW_Device_Extension *tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata; 1920 1921 /* If we are resetting due to timed out ioctl, report as busy */ 1922 if (test_bit(TW_IN_RESET, &tw_dev->flags)) 1923 return SCSI_MLQUEUE_HOST_BUSY; 1924 1925 /* Save done function into Scsi_Cmnd struct */ 1926 SCpnt->scsi_done = done; 1927 1928 /* Queue the command and get a request id */ 1929 tw_state_request_start(tw_dev, &request_id); 1930 1931 /* Save the scsi command for use by the ISR */ 1932 tw_dev->srb[request_id] = SCpnt; 1933 1934 switch (*command) { 1935 case READ_10: 1936 case READ_6: 1937 case WRITE_10: 1938 case WRITE_6: 1939 dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught READ/WRITE.\n"); 1940 retval = tw_scsiop_read_write(tw_dev, request_id); 1941 break; 1942 case TEST_UNIT_READY: 1943 dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught TEST_UNIT_READY.\n"); 1944 retval = tw_scsiop_test_unit_ready(tw_dev, request_id); 1945 break; 1946 case INQUIRY: 1947 dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught INQUIRY.\n"); 1948 retval = tw_scsiop_inquiry(tw_dev, request_id); 1949 break; 1950 case READ_CAPACITY: 1951 dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught READ_CAPACITY.\n"); 1952 retval = tw_scsiop_read_capacity(tw_dev, request_id); 1953 break; 1954 case REQUEST_SENSE: 1955 dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught REQUEST_SENSE.\n"); 1956 retval = tw_scsiop_request_sense(tw_dev, request_id); 1957 break; 1958 case MODE_SENSE: 1959 dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught MODE_SENSE.\n"); 1960 retval = tw_scsiop_mode_sense(tw_dev, request_id); 1961 break; 1962 case SYNCHRONIZE_CACHE: 1963 dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught SYNCHRONIZE_CACHE.\n"); 1964 retval = tw_scsiop_synchronize_cache(tw_dev, request_id); 1965 break; 1966 case TW_IOCTL: 1967 printk(KERN_WARNING "3w-xxxx: SCSI_IOCTL_SEND_COMMAND deprecated, please update your 3ware tools.\n"); 1968 break; 1969 default: 1970 printk(KERN_NOTICE "3w-xxxx: scsi%d: Unknown scsi opcode: 0x%x\n", tw_dev->host->host_no, *command); 1971 tw_dev->state[request_id] = TW_S_COMPLETED; 1972 tw_state_request_finish(tw_dev, request_id); 1973 SCpnt->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; 1974 scsi_build_sense_buffer(1, SCpnt->sense_buffer, ILLEGAL_REQUEST, 0x20, 0); 1975 done(SCpnt); 1976 retval = 0; 1977 } 1978 if (retval) { 1979 tw_dev->state[request_id] = TW_S_COMPLETED; 1980 tw_state_request_finish(tw_dev, request_id); 1981 SCpnt->result = (DID_ERROR << 16); 1982 done(SCpnt); 1983 retval = 0; 1984 } 1985 return retval; 1986 } /* End tw_scsi_queue() */ 1987 1988 static DEF_SCSI_QCMD(tw_scsi_queue) 1989 1990 /* This function is the interrupt service routine */ 1991 static irqreturn_t tw_interrupt(int irq, void *dev_instance) 1992 { 1993 int request_id; 1994 u32 status_reg_value; 1995 TW_Device_Extension *tw_dev = (TW_Device_Extension *)dev_instance; 1996 TW_Response_Queue response_que; 1997 int error = 0, retval = 0; 1998 TW_Command *command_packet; 1999 int handled = 0; 2000 2001 /* Get the host lock for io completions */ 2002 spin_lock(tw_dev->host->host_lock); 2003 2004 /* Read the registers */ 2005 status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev)); 2006 2007 /* Check if this is our interrupt, otherwise bail */ 2008 if (!(status_reg_value & TW_STATUS_VALID_INTERRUPT)) 2009 goto tw_interrupt_bail; 2010 2011 handled = 1; 2012 2013 /* If we are resetting, bail */ 2014 if (test_bit(TW_IN_RESET, &tw_dev->flags)) 2015 goto tw_interrupt_bail; 2016 2017 /* Check controller for errors */ 2018 if (tw_check_bits(status_reg_value)) { 2019 dprintk(KERN_WARNING "3w-xxxx: tw_interrupt(): Unexpected bits.\n"); 2020 if (tw_decode_bits(tw_dev, status_reg_value, 1)) { 2021 TW_CLEAR_ALL_INTERRUPTS(tw_dev); 2022 goto tw_interrupt_bail; 2023 } 2024 } 2025 2026 /* Handle host interrupt */ 2027 if (status_reg_value & TW_STATUS_HOST_INTERRUPT) { 2028 dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): Received host interrupt.\n"); 2029 TW_CLEAR_HOST_INTERRUPT(tw_dev); 2030 } 2031 2032 /* Handle attention interrupt */ 2033 if (status_reg_value & TW_STATUS_ATTENTION_INTERRUPT) { 2034 dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): Received attention interrupt.\n"); 2035 TW_CLEAR_ATTENTION_INTERRUPT(tw_dev); 2036 tw_state_request_start(tw_dev, &request_id); 2037 error = tw_aen_read_queue(tw_dev, request_id); 2038 if (error) { 2039 printk(KERN_WARNING "3w-xxxx: scsi%d: Error reading aen queue.\n", tw_dev->host->host_no); 2040 tw_dev->state[request_id] = TW_S_COMPLETED; 2041 tw_state_request_finish(tw_dev, request_id); 2042 } 2043 } 2044 2045 /* Handle command interrupt */ 2046 if (status_reg_value & TW_STATUS_COMMAND_INTERRUPT) { 2047 /* Drain as many pending commands as we can */ 2048 while (tw_dev->pending_request_count > 0) { 2049 request_id = tw_dev->pending_queue[tw_dev->pending_head]; 2050 if (tw_dev->state[request_id] != TW_S_PENDING) { 2051 printk(KERN_WARNING "3w-xxxx: scsi%d: Found request id that wasn't pending.\n", tw_dev->host->host_no); 2052 break; 2053 } 2054 if (tw_post_command_packet(tw_dev, request_id)==0) { 2055 if (tw_dev->pending_head == TW_Q_LENGTH-1) { 2056 tw_dev->pending_head = TW_Q_START; 2057 } else { 2058 tw_dev->pending_head = tw_dev->pending_head + 1; 2059 } 2060 tw_dev->pending_request_count--; 2061 } else { 2062 /* If we get here, we will continue re-posting on the next command interrupt */ 2063 break; 2064 } 2065 } 2066 /* If there are no more pending requests, we mask command interrupt */ 2067 if (tw_dev->pending_request_count == 0) 2068 TW_MASK_COMMAND_INTERRUPT(tw_dev); 2069 } 2070 2071 /* Handle response interrupt */ 2072 if (status_reg_value & TW_STATUS_RESPONSE_INTERRUPT) { 2073 /* Drain the response queue from the board */ 2074 while ((status_reg_value & TW_STATUS_RESPONSE_QUEUE_EMPTY) == 0) { 2075 /* Read response queue register */ 2076 response_que.value = inl(TW_RESPONSE_QUEUE_REG_ADDR(tw_dev)); 2077 request_id = TW_RESID_OUT(response_que.response_id); 2078 command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id]; 2079 error = 0; 2080 2081 /* Check for bad response */ 2082 if (command_packet->status != 0) { 2083 /* If internal command, don't error, don't fill sense */ 2084 if (tw_dev->srb[request_id] == NULL) { 2085 tw_decode_sense(tw_dev, request_id, 0); 2086 } else { 2087 error = tw_decode_sense(tw_dev, request_id, 1); 2088 } 2089 } 2090 2091 /* Check for correct state */ 2092 if (tw_dev->state[request_id] != TW_S_POSTED) { 2093 if (tw_dev->srb[request_id] != NULL) { 2094 printk(KERN_WARNING "3w-xxxx: scsi%d: Received a request id that wasn't posted.\n", tw_dev->host->host_no); 2095 error = 1; 2096 } 2097 } 2098 2099 dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): Response queue request id: %d.\n", request_id); 2100 2101 /* Check for internal command completion */ 2102 if (tw_dev->srb[request_id] == NULL) { 2103 dprintk(KERN_WARNING "3w-xxxx: tw_interrupt(): Found internally posted command.\n"); 2104 /* Check for chrdev ioctl completion */ 2105 if (request_id != tw_dev->chrdev_request_id) { 2106 retval = tw_aen_complete(tw_dev, request_id); 2107 if (retval) { 2108 printk(KERN_WARNING "3w-xxxx: scsi%d: Error completing aen.\n", tw_dev->host->host_no); 2109 } 2110 } else { 2111 tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE; 2112 wake_up(&tw_dev->ioctl_wqueue); 2113 } 2114 } else { 2115 switch (tw_dev->srb[request_id]->cmnd[0]) { 2116 case READ_10: 2117 case READ_6: 2118 dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught READ_10/READ_6\n"); 2119 break; 2120 case WRITE_10: 2121 case WRITE_6: 2122 dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught WRITE_10/WRITE_6\n"); 2123 break; 2124 case TEST_UNIT_READY: 2125 dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught TEST_UNIT_READY\n"); 2126 error = tw_scsiop_test_unit_ready_complete(tw_dev, request_id); 2127 break; 2128 case INQUIRY: 2129 dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught INQUIRY\n"); 2130 error = tw_scsiop_inquiry_complete(tw_dev, request_id); 2131 break; 2132 case READ_CAPACITY: 2133 dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught READ_CAPACITY\n"); 2134 error = tw_scsiop_read_capacity_complete(tw_dev, request_id); 2135 break; 2136 case MODE_SENSE: 2137 dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught MODE_SENSE\n"); 2138 error = tw_scsiop_mode_sense_complete(tw_dev, request_id); 2139 break; 2140 case SYNCHRONIZE_CACHE: 2141 dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught SYNCHRONIZE_CACHE\n"); 2142 break; 2143 default: 2144 printk(KERN_WARNING "3w-xxxx: case slip in tw_interrupt()\n"); 2145 error = 1; 2146 } 2147 2148 /* If no error command was a success */ 2149 if (error == 0) { 2150 tw_dev->srb[request_id]->result = (DID_OK << 16); 2151 } 2152 2153 /* If error, command failed */ 2154 if (error == 1) { 2155 /* Ask for a host reset */ 2156 tw_dev->srb[request_id]->result = (DID_OK << 16) | (CHECK_CONDITION << 1); 2157 } 2158 2159 /* Now complete the io */ 2160 if ((error != TW_ISR_DONT_COMPLETE)) { 2161 scsi_dma_unmap(tw_dev->srb[request_id]); 2162 tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]); 2163 tw_dev->state[request_id] = TW_S_COMPLETED; 2164 tw_state_request_finish(tw_dev, request_id); 2165 tw_dev->posted_request_count--; 2166 } 2167 } 2168 2169 /* Check for valid status after each drain */ 2170 status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev)); 2171 if (tw_check_bits(status_reg_value)) { 2172 dprintk(KERN_WARNING "3w-xxxx: tw_interrupt(): Unexpected bits.\n"); 2173 if (tw_decode_bits(tw_dev, status_reg_value, 1)) { 2174 TW_CLEAR_ALL_INTERRUPTS(tw_dev); 2175 goto tw_interrupt_bail; 2176 } 2177 } 2178 } 2179 } 2180 2181 tw_interrupt_bail: 2182 spin_unlock(tw_dev->host->host_lock); 2183 return IRQ_RETVAL(handled); 2184 } /* End tw_interrupt() */ 2185 2186 /* This function tells the controller to shut down */ 2187 static void __tw_shutdown(TW_Device_Extension *tw_dev) 2188 { 2189 /* Disable interrupts */ 2190 TW_DISABLE_INTERRUPTS(tw_dev); 2191 2192 /* Free up the IRQ */ 2193 free_irq(tw_dev->tw_pci_dev->irq, tw_dev); 2194 2195 printk(KERN_WARNING "3w-xxxx: Shutting down host %d.\n", tw_dev->host->host_no); 2196 2197 /* Tell the card we are shutting down */ 2198 if (tw_initconnection(tw_dev, 1)) { 2199 printk(KERN_WARNING "3w-xxxx: Connection shutdown failed.\n"); 2200 } else { 2201 printk(KERN_WARNING "3w-xxxx: Shutdown complete.\n"); 2202 } 2203 2204 /* Clear all interrupts just before exit */ 2205 TW_ENABLE_AND_CLEAR_INTERRUPTS(tw_dev); 2206 } /* End __tw_shutdown() */ 2207 2208 /* Wrapper for __tw_shutdown */ 2209 static void tw_shutdown(struct pci_dev *pdev) 2210 { 2211 struct Scsi_Host *host = pci_get_drvdata(pdev); 2212 TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata; 2213 2214 __tw_shutdown(tw_dev); 2215 } /* End tw_shutdown() */ 2216 2217 /* This function gets called when a disk is coming online */ 2218 static int tw_slave_configure(struct scsi_device *sdev) 2219 { 2220 /* Force 60 second timeout */ 2221 blk_queue_rq_timeout(sdev->request_queue, 60 * HZ); 2222 2223 return 0; 2224 } /* End tw_slave_configure() */ 2225 2226 static struct scsi_host_template driver_template = { 2227 .module = THIS_MODULE, 2228 .name = "3ware Storage Controller", 2229 .queuecommand = tw_scsi_queue, 2230 .eh_host_reset_handler = tw_scsi_eh_reset, 2231 .bios_param = tw_scsi_biosparam, 2232 .change_queue_depth = scsi_change_queue_depth, 2233 .can_queue = TW_Q_LENGTH-2, 2234 .slave_configure = tw_slave_configure, 2235 .this_id = -1, 2236 .sg_tablesize = TW_MAX_SGL_LENGTH, 2237 .max_sectors = TW_MAX_SECTORS, 2238 .cmd_per_lun = TW_MAX_CMDS_PER_LUN, 2239 .use_clustering = ENABLE_CLUSTERING, 2240 .shost_attrs = tw_host_attrs, 2241 .emulated = 1, 2242 .no_write_same = 1, 2243 }; 2244 2245 /* This function will probe and initialize a card */ 2246 static int tw_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id) 2247 { 2248 struct Scsi_Host *host = NULL; 2249 TW_Device_Extension *tw_dev; 2250 int retval = -ENODEV; 2251 2252 retval = pci_enable_device(pdev); 2253 if (retval) { 2254 printk(KERN_WARNING "3w-xxxx: Failed to enable pci device."); 2255 goto out_disable_device; 2256 } 2257 2258 pci_set_master(pdev); 2259 2260 retval = pci_set_dma_mask(pdev, TW_DMA_MASK); 2261 if (retval) { 2262 printk(KERN_WARNING "3w-xxxx: Failed to set dma mask."); 2263 goto out_disable_device; 2264 } 2265 2266 host = scsi_host_alloc(&driver_template, sizeof(TW_Device_Extension)); 2267 if (!host) { 2268 printk(KERN_WARNING "3w-xxxx: Failed to allocate memory for device extension."); 2269 retval = -ENOMEM; 2270 goto out_disable_device; 2271 } 2272 tw_dev = (TW_Device_Extension *)host->hostdata; 2273 2274 /* Save values to device extension */ 2275 tw_dev->host = host; 2276 tw_dev->tw_pci_dev = pdev; 2277 2278 if (tw_initialize_device_extension(tw_dev)) { 2279 printk(KERN_WARNING "3w-xxxx: Failed to initialize device extension."); 2280 goto out_free_device_extension; 2281 } 2282 2283 /* Request IO regions */ 2284 retval = pci_request_regions(pdev, "3w-xxxx"); 2285 if (retval) { 2286 printk(KERN_WARNING "3w-xxxx: Failed to get mem region."); 2287 goto out_free_device_extension; 2288 } 2289 2290 /* Save base address */ 2291 tw_dev->base_addr = pci_resource_start(pdev, 0); 2292 if (!tw_dev->base_addr) { 2293 printk(KERN_WARNING "3w-xxxx: Failed to get io address."); 2294 goto out_release_mem_region; 2295 } 2296 2297 /* Disable interrupts on the card */ 2298 TW_DISABLE_INTERRUPTS(tw_dev); 2299 2300 /* Initialize the card */ 2301 if (tw_reset_sequence(tw_dev)) 2302 goto out_release_mem_region; 2303 2304 /* Set host specific parameters */ 2305 host->max_id = TW_MAX_UNITS; 2306 host->max_cmd_len = TW_MAX_CDB_LEN; 2307 2308 /* Luns and channels aren't supported by adapter */ 2309 host->max_lun = 0; 2310 host->max_channel = 0; 2311 2312 /* Register the card with the kernel SCSI layer */ 2313 retval = scsi_add_host(host, &pdev->dev); 2314 if (retval) { 2315 printk(KERN_WARNING "3w-xxxx: scsi add host failed"); 2316 goto out_release_mem_region; 2317 } 2318 2319 pci_set_drvdata(pdev, host); 2320 2321 printk(KERN_WARNING "3w-xxxx: scsi%d: Found a 3ware Storage Controller at 0x%x, IRQ: %d.\n", host->host_no, tw_dev->base_addr, pdev->irq); 2322 2323 /* Now setup the interrupt handler */ 2324 retval = request_irq(pdev->irq, tw_interrupt, IRQF_SHARED, "3w-xxxx", tw_dev); 2325 if (retval) { 2326 printk(KERN_WARNING "3w-xxxx: Error requesting IRQ."); 2327 goto out_remove_host; 2328 } 2329 2330 tw_device_extension_list[tw_device_extension_count] = tw_dev; 2331 tw_device_extension_count++; 2332 2333 /* Re-enable interrupts on the card */ 2334 TW_ENABLE_AND_CLEAR_INTERRUPTS(tw_dev); 2335 2336 /* Finally, scan the host */ 2337 scsi_scan_host(host); 2338 2339 if (twe_major == -1) { 2340 if ((twe_major = register_chrdev (0, "twe", &tw_fops)) < 0) 2341 printk(KERN_WARNING "3w-xxxx: Failed to register character device."); 2342 } 2343 return 0; 2344 2345 out_remove_host: 2346 scsi_remove_host(host); 2347 out_release_mem_region: 2348 pci_release_regions(pdev); 2349 out_free_device_extension: 2350 tw_free_device_extension(tw_dev); 2351 scsi_host_put(host); 2352 out_disable_device: 2353 pci_disable_device(pdev); 2354 2355 return retval; 2356 } /* End tw_probe() */ 2357 2358 /* This function is called to remove a device */ 2359 static void tw_remove(struct pci_dev *pdev) 2360 { 2361 struct Scsi_Host *host = pci_get_drvdata(pdev); 2362 TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata; 2363 2364 scsi_remove_host(tw_dev->host); 2365 2366 /* Unregister character device */ 2367 if (twe_major >= 0) { 2368 unregister_chrdev(twe_major, "twe"); 2369 twe_major = -1; 2370 } 2371 2372 /* Shutdown the card */ 2373 __tw_shutdown(tw_dev); 2374 2375 /* Free up the mem region */ 2376 pci_release_regions(pdev); 2377 2378 /* Free up device extension resources */ 2379 tw_free_device_extension(tw_dev); 2380 2381 scsi_host_put(tw_dev->host); 2382 pci_disable_device(pdev); 2383 tw_device_extension_count--; 2384 } /* End tw_remove() */ 2385 2386 /* PCI Devices supported by this driver */ 2387 static struct pci_device_id tw_pci_tbl[] = { 2388 { PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_1000, 2389 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, 2390 { PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_7000, 2391 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, 2392 { } 2393 }; 2394 MODULE_DEVICE_TABLE(pci, tw_pci_tbl); 2395 2396 /* pci_driver initializer */ 2397 static struct pci_driver tw_driver = { 2398 .name = "3w-xxxx", 2399 .id_table = tw_pci_tbl, 2400 .probe = tw_probe, 2401 .remove = tw_remove, 2402 .shutdown = tw_shutdown, 2403 }; 2404 2405 /* This function is called on driver initialization */ 2406 static int __init tw_init(void) 2407 { 2408 printk(KERN_WARNING "3ware Storage Controller device driver for Linux v%s.\n", TW_DRIVER_VERSION); 2409 2410 return pci_register_driver(&tw_driver); 2411 } /* End tw_init() */ 2412 2413 /* This function is called on driver exit */ 2414 static void __exit tw_exit(void) 2415 { 2416 pci_unregister_driver(&tw_driver); 2417 } /* End tw_exit() */ 2418 2419 module_init(tw_init); 2420 module_exit(tw_exit); 2421 2422