xref: /openbmc/linux/drivers/s390/scsi/zfcp_ccw.c (revision 545e4006)
1 /*
2  * zfcp device driver
3  *
4  * Registration and callback for the s390 common I/O layer.
5  *
6  * Copyright IBM Corporation 2002, 2008
7  */
8 
9 #include "zfcp_ext.h"
10 
11 /**
12  * zfcp_ccw_probe - probe function of zfcp driver
13  * @ccw_device: pointer to belonging ccw device
14  *
15  * This function gets called by the common i/o layer and sets up the initial
16  * data structures for each fcp adapter, which was detected by the system.
17  * Also the sysfs files for this adapter will be created by this function.
18  * In addition the nameserver port will be added to the ports of the adapter
19  * and its sysfs representation will be created too.
20  */
21 static int zfcp_ccw_probe(struct ccw_device *ccw_device)
22 {
23 	int retval = 0;
24 
25 	down(&zfcp_data.config_sema);
26 	if (zfcp_adapter_enqueue(ccw_device)) {
27 		dev_err(&ccw_device->dev,
28 			"Setup of data structures failed.\n");
29 		retval = -EINVAL;
30 	}
31 	up(&zfcp_data.config_sema);
32 	return retval;
33 }
34 
35 /**
36  * zfcp_ccw_remove - remove function of zfcp driver
37  * @ccw_device: pointer to belonging ccw device
38  *
39  * This function gets called by the common i/o layer and removes an adapter
40  * from the system. Task of this function is to get rid of all units and
41  * ports that belong to this adapter. And in addition all resources of this
42  * adapter will be freed too.
43  */
44 static void zfcp_ccw_remove(struct ccw_device *ccw_device)
45 {
46 	struct zfcp_adapter *adapter;
47 	struct zfcp_port *port, *p;
48 	struct zfcp_unit *unit, *u;
49 
50 	ccw_device_set_offline(ccw_device);
51 	down(&zfcp_data.config_sema);
52 	adapter = dev_get_drvdata(&ccw_device->dev);
53 
54 	write_lock_irq(&zfcp_data.config_lock);
55 	list_for_each_entry_safe(port, p, &adapter->port_list_head, list) {
56 		list_for_each_entry_safe(unit, u, &port->unit_list_head, list) {
57 			list_move(&unit->list, &port->unit_remove_lh);
58 			atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE,
59 					&unit->status);
60 		}
61 		list_move(&port->list, &adapter->port_remove_lh);
62 		atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE, &port->status);
63 	}
64 	atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE, &adapter->status);
65 	write_unlock_irq(&zfcp_data.config_lock);
66 
67 	list_for_each_entry_safe(port, p, &adapter->port_remove_lh, list) {
68 		list_for_each_entry_safe(unit, u, &port->unit_remove_lh, list) {
69 			if (atomic_test_mask(ZFCP_STATUS_UNIT_REGISTERED,
70 				&unit->status))
71 				scsi_remove_device(unit->device);
72 			zfcp_unit_dequeue(unit);
73 		}
74 		zfcp_port_dequeue(port);
75 	}
76 	zfcp_adapter_wait(adapter);
77 	zfcp_adapter_dequeue(adapter);
78 
79 	up(&zfcp_data.config_sema);
80 }
81 
82 /**
83  * zfcp_ccw_set_online - set_online function of zfcp driver
84  * @ccw_device: pointer to belonging ccw device
85  *
86  * This function gets called by the common i/o layer and sets an adapter
87  * into state online. Setting an fcp device online means that it will be
88  * registered with the SCSI stack, that the QDIO queues will be set up
89  * and that the adapter will be opened (asynchronously).
90  */
91 static int zfcp_ccw_set_online(struct ccw_device *ccw_device)
92 {
93 	struct zfcp_adapter *adapter;
94 	int retval;
95 
96 	down(&zfcp_data.config_sema);
97 	adapter = dev_get_drvdata(&ccw_device->dev);
98 
99 	retval = zfcp_erp_thread_setup(adapter);
100 	if (retval)
101 		goto out;
102 
103 	retval = zfcp_adapter_scsi_register(adapter);
104 	if (retval)
105 		goto out_scsi_register;
106 
107 	/* initialize request counter */
108 	BUG_ON(!zfcp_reqlist_isempty(adapter));
109 	adapter->req_no = 0;
110 
111 	zfcp_erp_modify_adapter_status(adapter, 10, NULL,
112 				       ZFCP_STATUS_COMMON_RUNNING, ZFCP_SET);
113 	zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED, 85,
114 				NULL);
115 	zfcp_erp_wait(adapter);
116 	goto out;
117 
118  out_scsi_register:
119 	zfcp_erp_thread_kill(adapter);
120  out:
121 	up(&zfcp_data.config_sema);
122 	return retval;
123 }
124 
125 /**
126  * zfcp_ccw_set_offline - set_offline function of zfcp driver
127  * @ccw_device: pointer to belonging ccw device
128  *
129  * This function gets called by the common i/o layer and sets an adapter
130  * into state offline.
131  */
132 static int zfcp_ccw_set_offline(struct ccw_device *ccw_device)
133 {
134 	struct zfcp_adapter *adapter;
135 
136 	down(&zfcp_data.config_sema);
137 	adapter = dev_get_drvdata(&ccw_device->dev);
138 	zfcp_erp_adapter_shutdown(adapter, 0, 86, NULL);
139 	zfcp_erp_wait(adapter);
140 	zfcp_erp_thread_kill(adapter);
141 	up(&zfcp_data.config_sema);
142 	return 0;
143 }
144 
145 /**
146  * zfcp_ccw_notify - ccw notify function
147  * @ccw_device: pointer to belonging ccw device
148  * @event: indicates if adapter was detached or attached
149  *
150  * This function gets called by the common i/o layer if an adapter has gone
151  * or reappeared.
152  */
153 static int zfcp_ccw_notify(struct ccw_device *ccw_device, int event)
154 {
155 	struct zfcp_adapter *adapter;
156 
157 	down(&zfcp_data.config_sema);
158 	adapter = dev_get_drvdata(&ccw_device->dev);
159 	switch (event) {
160 	case CIO_GONE:
161 		dev_warn(&adapter->ccw_device->dev, "device gone\n");
162 		zfcp_erp_adapter_shutdown(adapter, 0, 87, NULL);
163 		break;
164 	case CIO_NO_PATH:
165 		dev_warn(&adapter->ccw_device->dev, "no path\n");
166 		zfcp_erp_adapter_shutdown(adapter, 0, 88, NULL);
167 		break;
168 	case CIO_OPER:
169 		dev_info(&adapter->ccw_device->dev, "operational again\n");
170 		zfcp_erp_modify_adapter_status(adapter, 11, NULL,
171 					       ZFCP_STATUS_COMMON_RUNNING,
172 					       ZFCP_SET);
173 		zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED,
174 					89, NULL);
175 		break;
176 	}
177 	zfcp_erp_wait(adapter);
178 	up(&zfcp_data.config_sema);
179 	return 1;
180 }
181 
182 /**
183  * zfcp_ccw_shutdown - handle shutdown from cio
184  * @cdev: device for adapter to shutdown.
185  */
186 static void zfcp_ccw_shutdown(struct ccw_device *cdev)
187 {
188 	struct zfcp_adapter *adapter;
189 
190 	down(&zfcp_data.config_sema);
191 	adapter = dev_get_drvdata(&cdev->dev);
192 	zfcp_erp_adapter_shutdown(adapter, 0, 90, NULL);
193 	zfcp_erp_wait(adapter);
194 	up(&zfcp_data.config_sema);
195 }
196 
197 static struct ccw_device_id zfcp_ccw_device_id[] = {
198 	{ CCW_DEVICE_DEVTYPE(0x1731, 0x3, 0x1732, 0x3) },
199 	{ CCW_DEVICE_DEVTYPE(0x1731, 0x3, 0x1732, 0x4) }, /* priv. */
200 	{},
201 };
202 
203 MODULE_DEVICE_TABLE(ccw, zfcp_ccw_device_id);
204 
205 static struct ccw_driver zfcp_ccw_driver = {
206 	.owner       = THIS_MODULE,
207 	.name        = "zfcp",
208 	.ids         = zfcp_ccw_device_id,
209 	.probe       = zfcp_ccw_probe,
210 	.remove      = zfcp_ccw_remove,
211 	.set_online  = zfcp_ccw_set_online,
212 	.set_offline = zfcp_ccw_set_offline,
213 	.notify      = zfcp_ccw_notify,
214 	.shutdown    = zfcp_ccw_shutdown,
215 };
216 
217 /**
218  * zfcp_ccw_register - ccw register function
219  *
220  * Registers the driver at the common i/o layer. This function will be called
221  * at module load time/system start.
222  */
223 int __init zfcp_ccw_register(void)
224 {
225 	return ccw_driver_register(&zfcp_ccw_driver);
226 }
227