1 /* 2 * File...........: linux/drivers/s390/block/dasd_3990_erp.c 3 * Author(s)......: Horst Hummel <Horst.Hummel@de.ibm.com> 4 * Holger Smolinski <Holger.Smolinski@de.ibm.com> 5 * Bugreports.to..: <Linux390@de.ibm.com> 6 * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 2000, 2001 7 * 8 */ 9 10 #define KMSG_COMPONENT "dasd-eckd" 11 12 #include <linux/timer.h> 13 #include <asm/idals.h> 14 15 #define PRINTK_HEADER "dasd_erp(3990): " 16 17 #include "dasd_int.h" 18 #include "dasd_eckd.h" 19 20 21 struct DCTL_data { 22 unsigned char subcommand; /* e.g Inhibit Write, Enable Write,... */ 23 unsigned char modifier; /* Subcommand modifier */ 24 unsigned short res; /* reserved */ 25 } __attribute__ ((packed)); 26 27 /* 28 ***************************************************************************** 29 * SECTION ERP HANDLING 30 ***************************************************************************** 31 */ 32 /* 33 ***************************************************************************** 34 * 24 and 32 byte sense ERP functions 35 ***************************************************************************** 36 */ 37 38 /* 39 * DASD_3990_ERP_CLEANUP 40 * 41 * DESCRIPTION 42 * Removes the already build but not necessary ERP request and sets 43 * the status of the original cqr / erp to the given (final) status 44 * 45 * PARAMETER 46 * erp request to be blocked 47 * final_status either DASD_CQR_DONE or DASD_CQR_FAILED 48 * 49 * RETURN VALUES 50 * cqr original cqr 51 */ 52 static struct dasd_ccw_req * 53 dasd_3990_erp_cleanup(struct dasd_ccw_req * erp, char final_status) 54 { 55 struct dasd_ccw_req *cqr = erp->refers; 56 57 dasd_free_erp_request(erp, erp->memdev); 58 cqr->status = final_status; 59 return cqr; 60 61 } /* end dasd_3990_erp_cleanup */ 62 63 /* 64 * DASD_3990_ERP_BLOCK_QUEUE 65 * 66 * DESCRIPTION 67 * Block the given device request queue to prevent from further 68 * processing until the started timer has expired or an related 69 * interrupt was received. 70 */ 71 static void dasd_3990_erp_block_queue(struct dasd_ccw_req *erp, int expires) 72 { 73 74 struct dasd_device *device = erp->startdev; 75 unsigned long flags; 76 77 DBF_DEV_EVENT(DBF_INFO, device, 78 "blocking request queue for %is", expires/HZ); 79 80 spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags); 81 dasd_device_set_stop_bits(device, DASD_STOPPED_PENDING); 82 spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags); 83 erp->status = DASD_CQR_FILLED; 84 if (erp->block) 85 dasd_block_set_timer(erp->block, expires); 86 else 87 dasd_device_set_timer(device, expires); 88 } 89 90 /* 91 * DASD_3990_ERP_INT_REQ 92 * 93 * DESCRIPTION 94 * Handles 'Intervention Required' error. 95 * This means either device offline or not installed. 96 * 97 * PARAMETER 98 * erp current erp 99 * RETURN VALUES 100 * erp modified erp 101 */ 102 static struct dasd_ccw_req * 103 dasd_3990_erp_int_req(struct dasd_ccw_req * erp) 104 { 105 106 struct dasd_device *device = erp->startdev; 107 108 /* first time set initial retry counter and erp_function */ 109 /* and retry once without blocking queue */ 110 /* (this enables easier enqueing of the cqr) */ 111 if (erp->function != dasd_3990_erp_int_req) { 112 113 erp->retries = 256; 114 erp->function = dasd_3990_erp_int_req; 115 116 } else { 117 118 /* issue a message and wait for 'device ready' interrupt */ 119 dev_err(&device->cdev->dev, 120 "is offline or not installed - " 121 "INTERVENTION REQUIRED!!\n"); 122 123 dasd_3990_erp_block_queue(erp, 60*HZ); 124 } 125 126 return erp; 127 128 } /* end dasd_3990_erp_int_req */ 129 130 /* 131 * DASD_3990_ERP_ALTERNATE_PATH 132 * 133 * DESCRIPTION 134 * Repeat the operation on a different channel path. 135 * If all alternate paths have been tried, the request is posted with a 136 * permanent error. 137 * 138 * PARAMETER 139 * erp pointer to the current ERP 140 * 141 * RETURN VALUES 142 * erp modified pointer to the ERP 143 */ 144 static void 145 dasd_3990_erp_alternate_path(struct dasd_ccw_req * erp) 146 { 147 struct dasd_device *device = erp->startdev; 148 __u8 opm; 149 unsigned long flags; 150 151 /* try alternate valid path */ 152 spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags); 153 opm = ccw_device_get_path_mask(device->cdev); 154 spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags); 155 if (erp->lpm == 0) 156 erp->lpm = device->path_data.opm & 157 ~(erp->irb.esw.esw0.sublog.lpum); 158 else 159 erp->lpm &= ~(erp->irb.esw.esw0.sublog.lpum); 160 161 if ((erp->lpm & opm) != 0x00) { 162 163 DBF_DEV_EVENT(DBF_WARNING, device, 164 "try alternate lpm=%x (lpum=%x / opm=%x)", 165 erp->lpm, erp->irb.esw.esw0.sublog.lpum, opm); 166 167 /* reset status to submit the request again... */ 168 erp->status = DASD_CQR_FILLED; 169 erp->retries = 10; 170 } else { 171 dev_err(&device->cdev->dev, 172 "The DASD cannot be reached on any path (lpum=%x" 173 "/opm=%x)\n", erp->irb.esw.esw0.sublog.lpum, opm); 174 175 /* post request with permanent error */ 176 erp->status = DASD_CQR_FAILED; 177 } 178 } /* end dasd_3990_erp_alternate_path */ 179 180 /* 181 * DASD_3990_ERP_DCTL 182 * 183 * DESCRIPTION 184 * Setup cqr to do the Diagnostic Control (DCTL) command with an 185 * Inhibit Write subcommand (0x20) and the given modifier. 186 * 187 * PARAMETER 188 * erp pointer to the current (failed) ERP 189 * modifier subcommand modifier 190 * 191 * RETURN VALUES 192 * dctl_cqr pointer to NEW dctl_cqr 193 * 194 */ 195 static struct dasd_ccw_req * 196 dasd_3990_erp_DCTL(struct dasd_ccw_req * erp, char modifier) 197 { 198 199 struct dasd_device *device = erp->startdev; 200 struct DCTL_data *DCTL_data; 201 struct ccw1 *ccw; 202 struct dasd_ccw_req *dctl_cqr; 203 204 dctl_cqr = dasd_alloc_erp_request((char *) &erp->magic, 1, 205 sizeof(struct DCTL_data), 206 device); 207 if (IS_ERR(dctl_cqr)) { 208 dev_err(&device->cdev->dev, 209 "Unable to allocate DCTL-CQR\n"); 210 erp->status = DASD_CQR_FAILED; 211 return erp; 212 } 213 214 DCTL_data = dctl_cqr->data; 215 216 DCTL_data->subcommand = 0x02; /* Inhibit Write */ 217 DCTL_data->modifier = modifier; 218 219 ccw = dctl_cqr->cpaddr; 220 memset(ccw, 0, sizeof(struct ccw1)); 221 ccw->cmd_code = CCW_CMD_DCTL; 222 ccw->count = 4; 223 ccw->cda = (__u32)(addr_t) DCTL_data; 224 dctl_cqr->flags = erp->flags; 225 dctl_cqr->function = dasd_3990_erp_DCTL; 226 dctl_cqr->refers = erp; 227 dctl_cqr->startdev = device; 228 dctl_cqr->memdev = device; 229 dctl_cqr->magic = erp->magic; 230 dctl_cqr->expires = 5 * 60 * HZ; 231 dctl_cqr->retries = 2; 232 233 dctl_cqr->buildclk = get_clock(); 234 235 dctl_cqr->status = DASD_CQR_FILLED; 236 237 return dctl_cqr; 238 239 } /* end dasd_3990_erp_DCTL */ 240 241 /* 242 * DASD_3990_ERP_ACTION_1 243 * 244 * DESCRIPTION 245 * Setup ERP to do the ERP action 1 (see Reference manual). 246 * Repeat the operation on a different channel path. 247 * As deviation from the recommended recovery action, we reset the path mask 248 * after we have tried each path and go through all paths a second time. 249 * This will cover situations where only one path at a time is actually down, 250 * but all paths fail and recover just with the same sequence and timing as 251 * we try to use them (flapping links). 252 * If all alternate paths have been tried twice, the request is posted with 253 * a permanent error. 254 * 255 * PARAMETER 256 * erp pointer to the current ERP 257 * 258 * RETURN VALUES 259 * erp pointer to the ERP 260 * 261 */ 262 static struct dasd_ccw_req *dasd_3990_erp_action_1_sec(struct dasd_ccw_req *erp) 263 { 264 erp->function = dasd_3990_erp_action_1_sec; 265 dasd_3990_erp_alternate_path(erp); 266 return erp; 267 } 268 269 static struct dasd_ccw_req *dasd_3990_erp_action_1(struct dasd_ccw_req *erp) 270 { 271 erp->function = dasd_3990_erp_action_1; 272 dasd_3990_erp_alternate_path(erp); 273 if (erp->status == DASD_CQR_FAILED && 274 !test_bit(DASD_CQR_VERIFY_PATH, &erp->flags)) { 275 erp->status = DASD_CQR_FILLED; 276 erp->retries = 10; 277 erp->lpm = erp->startdev->path_data.opm; 278 erp->function = dasd_3990_erp_action_1_sec; 279 } 280 return erp; 281 } /* end dasd_3990_erp_action_1(b) */ 282 283 /* 284 * DASD_3990_ERP_ACTION_4 285 * 286 * DESCRIPTION 287 * Setup ERP to do the ERP action 4 (see Reference manual). 288 * Set the current request to PENDING to block the CQR queue for that device 289 * until the state change interrupt appears. 290 * Use a timer (20 seconds) to retry the cqr if the interrupt is still 291 * missing. 292 * 293 * PARAMETER 294 * sense sense data of the actual error 295 * erp pointer to the current ERP 296 * 297 * RETURN VALUES 298 * erp pointer to the ERP 299 * 300 */ 301 static struct dasd_ccw_req * 302 dasd_3990_erp_action_4(struct dasd_ccw_req * erp, char *sense) 303 { 304 305 struct dasd_device *device = erp->startdev; 306 307 /* first time set initial retry counter and erp_function */ 308 /* and retry once without waiting for state change pending */ 309 /* interrupt (this enables easier enqueing of the cqr) */ 310 if (erp->function != dasd_3990_erp_action_4) { 311 312 DBF_DEV_EVENT(DBF_INFO, device, "%s", 313 "dasd_3990_erp_action_4: first time retry"); 314 315 erp->retries = 256; 316 erp->function = dasd_3990_erp_action_4; 317 318 } else { 319 if (sense && (sense[25] == 0x1D)) { /* state change pending */ 320 321 DBF_DEV_EVENT(DBF_INFO, device, 322 "waiting for state change pending " 323 "interrupt, %d retries left", 324 erp->retries); 325 326 dasd_3990_erp_block_queue(erp, 30*HZ); 327 328 } else if (sense && (sense[25] == 0x1E)) { /* busy */ 329 DBF_DEV_EVENT(DBF_INFO, device, 330 "busy - redriving request later, " 331 "%d retries left", 332 erp->retries); 333 dasd_3990_erp_block_queue(erp, HZ); 334 } else { 335 /* no state change pending - retry */ 336 DBF_DEV_EVENT(DBF_INFO, device, 337 "redriving request immediately, " 338 "%d retries left", 339 erp->retries); 340 erp->status = DASD_CQR_FILLED; 341 } 342 } 343 344 return erp; 345 346 } /* end dasd_3990_erp_action_4 */ 347 348 /* 349 ***************************************************************************** 350 * 24 byte sense ERP functions (only) 351 ***************************************************************************** 352 */ 353 354 /* 355 * DASD_3990_ERP_ACTION_5 356 * 357 * DESCRIPTION 358 * Setup ERP to do the ERP action 5 (see Reference manual). 359 * NOTE: Further handling is done in xxx_further_erp after the retries. 360 * 361 * PARAMETER 362 * erp pointer to the current ERP 363 * 364 * RETURN VALUES 365 * erp pointer to the ERP 366 * 367 */ 368 static struct dasd_ccw_req * 369 dasd_3990_erp_action_5(struct dasd_ccw_req * erp) 370 { 371 372 /* first of all retry */ 373 erp->retries = 10; 374 erp->function = dasd_3990_erp_action_5; 375 376 return erp; 377 378 } /* end dasd_3990_erp_action_5 */ 379 380 /* 381 * DASD_3990_HANDLE_ENV_DATA 382 * 383 * DESCRIPTION 384 * Handles 24 byte 'Environmental data present'. 385 * Does a analysis of the sense data (message Format) 386 * and prints the error messages. 387 * 388 * PARAMETER 389 * sense current sense data 390 * 391 * RETURN VALUES 392 * void 393 */ 394 static void 395 dasd_3990_handle_env_data(struct dasd_ccw_req * erp, char *sense) 396 { 397 398 struct dasd_device *device = erp->startdev; 399 char msg_format = (sense[7] & 0xF0); 400 char msg_no = (sense[7] & 0x0F); 401 char errorstring[ERRORLENGTH]; 402 403 switch (msg_format) { 404 case 0x00: /* Format 0 - Program or System Checks */ 405 406 if (sense[1] & 0x10) { /* check message to operator bit */ 407 408 switch (msg_no) { 409 case 0x00: /* No Message */ 410 break; 411 case 0x01: 412 dev_warn(&device->cdev->dev, 413 "FORMAT 0 - Invalid Command\n"); 414 break; 415 case 0x02: 416 dev_warn(&device->cdev->dev, 417 "FORMAT 0 - Invalid Command " 418 "Sequence\n"); 419 break; 420 case 0x03: 421 dev_warn(&device->cdev->dev, 422 "FORMAT 0 - CCW Count less than " 423 "required\n"); 424 break; 425 case 0x04: 426 dev_warn(&device->cdev->dev, 427 "FORMAT 0 - Invalid Parameter\n"); 428 break; 429 case 0x05: 430 dev_warn(&device->cdev->dev, 431 "FORMAT 0 - Diagnostic of Special" 432 " Command Violates File Mask\n"); 433 break; 434 case 0x07: 435 dev_warn(&device->cdev->dev, 436 "FORMAT 0 - Channel Returned with " 437 "Incorrect retry CCW\n"); 438 break; 439 case 0x08: 440 dev_warn(&device->cdev->dev, 441 "FORMAT 0 - Reset Notification\n"); 442 break; 443 case 0x09: 444 dev_warn(&device->cdev->dev, 445 "FORMAT 0 - Storage Path Restart\n"); 446 break; 447 case 0x0A: 448 dev_warn(&device->cdev->dev, 449 "FORMAT 0 - Channel requested " 450 "... %02x\n", sense[8]); 451 break; 452 case 0x0B: 453 dev_warn(&device->cdev->dev, 454 "FORMAT 0 - Invalid Defective/" 455 "Alternate Track Pointer\n"); 456 break; 457 case 0x0C: 458 dev_warn(&device->cdev->dev, 459 "FORMAT 0 - DPS Installation " 460 "Check\n"); 461 break; 462 case 0x0E: 463 dev_warn(&device->cdev->dev, 464 "FORMAT 0 - Command Invalid on " 465 "Secondary Address\n"); 466 break; 467 case 0x0F: 468 dev_warn(&device->cdev->dev, 469 "FORMAT 0 - Status Not As " 470 "Required: reason %02x\n", 471 sense[8]); 472 break; 473 default: 474 dev_warn(&device->cdev->dev, 475 "FORMAT 0 - Reserved\n"); 476 } 477 } else { 478 switch (msg_no) { 479 case 0x00: /* No Message */ 480 break; 481 case 0x01: 482 dev_warn(&device->cdev->dev, 483 "FORMAT 0 - Device Error " 484 "Source\n"); 485 break; 486 case 0x02: 487 dev_warn(&device->cdev->dev, 488 "FORMAT 0 - Reserved\n"); 489 break; 490 case 0x03: 491 dev_warn(&device->cdev->dev, 492 "FORMAT 0 - Device Fenced - " 493 "device = %02x\n", sense[4]); 494 break; 495 case 0x04: 496 dev_warn(&device->cdev->dev, 497 "FORMAT 0 - Data Pinned for " 498 "Device\n"); 499 break; 500 default: 501 dev_warn(&device->cdev->dev, 502 "FORMAT 0 - Reserved\n"); 503 } 504 } 505 break; 506 507 case 0x10: /* Format 1 - Device Equipment Checks */ 508 switch (msg_no) { 509 case 0x00: /* No Message */ 510 break; 511 case 0x01: 512 dev_warn(&device->cdev->dev, 513 "FORMAT 1 - Device Status 1 not as " 514 "expected\n"); 515 break; 516 case 0x03: 517 dev_warn(&device->cdev->dev, 518 "FORMAT 1 - Index missing\n"); 519 break; 520 case 0x04: 521 dev_warn(&device->cdev->dev, 522 "FORMAT 1 - Interruption cannot be " 523 "reset\n"); 524 break; 525 case 0x05: 526 dev_warn(&device->cdev->dev, 527 "FORMAT 1 - Device did not respond to " 528 "selection\n"); 529 break; 530 case 0x06: 531 dev_warn(&device->cdev->dev, 532 "FORMAT 1 - Device check-2 error or Set " 533 "Sector is not complete\n"); 534 break; 535 case 0x07: 536 dev_warn(&device->cdev->dev, 537 "FORMAT 1 - Head address does not " 538 "compare\n"); 539 break; 540 case 0x08: 541 dev_warn(&device->cdev->dev, 542 "FORMAT 1 - Device status 1 not valid\n"); 543 break; 544 case 0x09: 545 dev_warn(&device->cdev->dev, 546 "FORMAT 1 - Device not ready\n"); 547 break; 548 case 0x0A: 549 dev_warn(&device->cdev->dev, 550 "FORMAT 1 - Track physical address did " 551 "not compare\n"); 552 break; 553 case 0x0B: 554 dev_warn(&device->cdev->dev, 555 "FORMAT 1 - Missing device address bit\n"); 556 break; 557 case 0x0C: 558 dev_warn(&device->cdev->dev, 559 "FORMAT 1 - Drive motor switch is off\n"); 560 break; 561 case 0x0D: 562 dev_warn(&device->cdev->dev, 563 "FORMAT 1 - Seek incomplete\n"); 564 break; 565 case 0x0E: 566 dev_warn(&device->cdev->dev, 567 "FORMAT 1 - Cylinder address did not " 568 "compare\n"); 569 break; 570 case 0x0F: 571 dev_warn(&device->cdev->dev, 572 "FORMAT 1 - Offset active cannot be " 573 "reset\n"); 574 break; 575 default: 576 dev_warn(&device->cdev->dev, 577 "FORMAT 1 - Reserved\n"); 578 } 579 break; 580 581 case 0x20: /* Format 2 - 3990 Equipment Checks */ 582 switch (msg_no) { 583 case 0x08: 584 dev_warn(&device->cdev->dev, 585 "FORMAT 2 - 3990 check-2 error\n"); 586 break; 587 case 0x0E: 588 dev_warn(&device->cdev->dev, 589 "FORMAT 2 - Support facility errors\n"); 590 break; 591 case 0x0F: 592 dev_warn(&device->cdev->dev, 593 "FORMAT 2 - Microcode detected error " 594 "%02x\n", 595 sense[8]); 596 break; 597 default: 598 dev_warn(&device->cdev->dev, 599 "FORMAT 2 - Reserved\n"); 600 } 601 break; 602 603 case 0x30: /* Format 3 - 3990 Control Checks */ 604 switch (msg_no) { 605 case 0x0F: 606 dev_warn(&device->cdev->dev, 607 "FORMAT 3 - Allegiance terminated\n"); 608 break; 609 default: 610 dev_warn(&device->cdev->dev, 611 "FORMAT 3 - Reserved\n"); 612 } 613 break; 614 615 case 0x40: /* Format 4 - Data Checks */ 616 switch (msg_no) { 617 case 0x00: 618 dev_warn(&device->cdev->dev, 619 "FORMAT 4 - Home address area error\n"); 620 break; 621 case 0x01: 622 dev_warn(&device->cdev->dev, 623 "FORMAT 4 - Count area error\n"); 624 break; 625 case 0x02: 626 dev_warn(&device->cdev->dev, 627 "FORMAT 4 - Key area error\n"); 628 break; 629 case 0x03: 630 dev_warn(&device->cdev->dev, 631 "FORMAT 4 - Data area error\n"); 632 break; 633 case 0x04: 634 dev_warn(&device->cdev->dev, 635 "FORMAT 4 - No sync byte in home address " 636 "area\n"); 637 break; 638 case 0x05: 639 dev_warn(&device->cdev->dev, 640 "FORMAT 4 - No sync byte in count address " 641 "area\n"); 642 break; 643 case 0x06: 644 dev_warn(&device->cdev->dev, 645 "FORMAT 4 - No sync byte in key area\n"); 646 break; 647 case 0x07: 648 dev_warn(&device->cdev->dev, 649 "FORMAT 4 - No sync byte in data area\n"); 650 break; 651 case 0x08: 652 dev_warn(&device->cdev->dev, 653 "FORMAT 4 - Home address area error; " 654 "offset active\n"); 655 break; 656 case 0x09: 657 dev_warn(&device->cdev->dev, 658 "FORMAT 4 - Count area error; offset " 659 "active\n"); 660 break; 661 case 0x0A: 662 dev_warn(&device->cdev->dev, 663 "FORMAT 4 - Key area error; offset " 664 "active\n"); 665 break; 666 case 0x0B: 667 dev_warn(&device->cdev->dev, 668 "FORMAT 4 - Data area error; " 669 "offset active\n"); 670 break; 671 case 0x0C: 672 dev_warn(&device->cdev->dev, 673 "FORMAT 4 - No sync byte in home " 674 "address area; offset active\n"); 675 break; 676 case 0x0D: 677 dev_warn(&device->cdev->dev, 678 "FORMAT 4 - No syn byte in count " 679 "address area; offset active\n"); 680 break; 681 case 0x0E: 682 dev_warn(&device->cdev->dev, 683 "FORMAT 4 - No sync byte in key area; " 684 "offset active\n"); 685 break; 686 case 0x0F: 687 dev_warn(&device->cdev->dev, 688 "FORMAT 4 - No syn byte in data area; " 689 "offset active\n"); 690 break; 691 default: 692 dev_warn(&device->cdev->dev, 693 "FORMAT 4 - Reserved\n"); 694 } 695 break; 696 697 case 0x50: /* Format 5 - Data Check with displacement information */ 698 switch (msg_no) { 699 case 0x00: 700 dev_warn(&device->cdev->dev, 701 "FORMAT 5 - Data Check in the " 702 "home address area\n"); 703 break; 704 case 0x01: 705 dev_warn(&device->cdev->dev, 706 "FORMAT 5 - Data Check in the count " 707 "area\n"); 708 break; 709 case 0x02: 710 dev_warn(&device->cdev->dev, 711 "FORMAT 5 - Data Check in the key area\n"); 712 break; 713 case 0x03: 714 dev_warn(&device->cdev->dev, 715 "FORMAT 5 - Data Check in the data " 716 "area\n"); 717 break; 718 case 0x08: 719 dev_warn(&device->cdev->dev, 720 "FORMAT 5 - Data Check in the " 721 "home address area; offset active\n"); 722 break; 723 case 0x09: 724 dev_warn(&device->cdev->dev, 725 "FORMAT 5 - Data Check in the count area; " 726 "offset active\n"); 727 break; 728 case 0x0A: 729 dev_warn(&device->cdev->dev, 730 "FORMAT 5 - Data Check in the key area; " 731 "offset active\n"); 732 break; 733 case 0x0B: 734 dev_warn(&device->cdev->dev, 735 "FORMAT 5 - Data Check in the data area; " 736 "offset active\n"); 737 break; 738 default: 739 dev_warn(&device->cdev->dev, 740 "FORMAT 5 - Reserved\n"); 741 } 742 break; 743 744 case 0x60: /* Format 6 - Usage Statistics/Overrun Errors */ 745 switch (msg_no) { 746 case 0x00: 747 dev_warn(&device->cdev->dev, 748 "FORMAT 6 - Overrun on channel A\n"); 749 break; 750 case 0x01: 751 dev_warn(&device->cdev->dev, 752 "FORMAT 6 - Overrun on channel B\n"); 753 break; 754 case 0x02: 755 dev_warn(&device->cdev->dev, 756 "FORMAT 6 - Overrun on channel C\n"); 757 break; 758 case 0x03: 759 dev_warn(&device->cdev->dev, 760 "FORMAT 6 - Overrun on channel D\n"); 761 break; 762 case 0x04: 763 dev_warn(&device->cdev->dev, 764 "FORMAT 6 - Overrun on channel E\n"); 765 break; 766 case 0x05: 767 dev_warn(&device->cdev->dev, 768 "FORMAT 6 - Overrun on channel F\n"); 769 break; 770 case 0x06: 771 dev_warn(&device->cdev->dev, 772 "FORMAT 6 - Overrun on channel G\n"); 773 break; 774 case 0x07: 775 dev_warn(&device->cdev->dev, 776 "FORMAT 6 - Overrun on channel H\n"); 777 break; 778 default: 779 dev_warn(&device->cdev->dev, 780 "FORMAT 6 - Reserved\n"); 781 } 782 break; 783 784 case 0x70: /* Format 7 - Device Connection Control Checks */ 785 switch (msg_no) { 786 case 0x00: 787 dev_warn(&device->cdev->dev, 788 "FORMAT 7 - RCC initiated by a connection " 789 "check alert\n"); 790 break; 791 case 0x01: 792 dev_warn(&device->cdev->dev, 793 "FORMAT 7 - RCC 1 sequence not " 794 "successful\n"); 795 break; 796 case 0x02: 797 dev_warn(&device->cdev->dev, 798 "FORMAT 7 - RCC 1 and RCC 2 sequences not " 799 "successful\n"); 800 break; 801 case 0x03: 802 dev_warn(&device->cdev->dev, 803 "FORMAT 7 - Invalid tag-in during " 804 "selection sequence\n"); 805 break; 806 case 0x04: 807 dev_warn(&device->cdev->dev, 808 "FORMAT 7 - extra RCC required\n"); 809 break; 810 case 0x05: 811 dev_warn(&device->cdev->dev, 812 "FORMAT 7 - Invalid DCC selection " 813 "response or timeout\n"); 814 break; 815 case 0x06: 816 dev_warn(&device->cdev->dev, 817 "FORMAT 7 - Missing end operation; device " 818 "transfer complete\n"); 819 break; 820 case 0x07: 821 dev_warn(&device->cdev->dev, 822 "FORMAT 7 - Missing end operation; device " 823 "transfer incomplete\n"); 824 break; 825 case 0x08: 826 dev_warn(&device->cdev->dev, 827 "FORMAT 7 - Invalid tag-in for an " 828 "immediate command sequence\n"); 829 break; 830 case 0x09: 831 dev_warn(&device->cdev->dev, 832 "FORMAT 7 - Invalid tag-in for an " 833 "extended command sequence\n"); 834 break; 835 case 0x0A: 836 dev_warn(&device->cdev->dev, 837 "FORMAT 7 - 3990 microcode time out when " 838 "stopping selection\n"); 839 break; 840 case 0x0B: 841 dev_warn(&device->cdev->dev, 842 "FORMAT 7 - No response to selection " 843 "after a poll interruption\n"); 844 break; 845 case 0x0C: 846 dev_warn(&device->cdev->dev, 847 "FORMAT 7 - Permanent path error (DASD " 848 "controller not available)\n"); 849 break; 850 case 0x0D: 851 dev_warn(&device->cdev->dev, 852 "FORMAT 7 - DASD controller not available" 853 " on disconnected command chain\n"); 854 break; 855 default: 856 dev_warn(&device->cdev->dev, 857 "FORMAT 7 - Reserved\n"); 858 } 859 break; 860 861 case 0x80: /* Format 8 - Additional Device Equipment Checks */ 862 switch (msg_no) { 863 case 0x00: /* No Message */ 864 case 0x01: 865 dev_warn(&device->cdev->dev, 866 "FORMAT 8 - Error correction code " 867 "hardware fault\n"); 868 break; 869 case 0x03: 870 dev_warn(&device->cdev->dev, 871 "FORMAT 8 - Unexpected end operation " 872 "response code\n"); 873 break; 874 case 0x04: 875 dev_warn(&device->cdev->dev, 876 "FORMAT 8 - End operation with transfer " 877 "count not zero\n"); 878 break; 879 case 0x05: 880 dev_warn(&device->cdev->dev, 881 "FORMAT 8 - End operation with transfer " 882 "count zero\n"); 883 break; 884 case 0x06: 885 dev_warn(&device->cdev->dev, 886 "FORMAT 8 - DPS checks after a system " 887 "reset or selective reset\n"); 888 break; 889 case 0x07: 890 dev_warn(&device->cdev->dev, 891 "FORMAT 8 - DPS cannot be filled\n"); 892 break; 893 case 0x08: 894 dev_warn(&device->cdev->dev, 895 "FORMAT 8 - Short busy time-out during " 896 "device selection\n"); 897 break; 898 case 0x09: 899 dev_warn(&device->cdev->dev, 900 "FORMAT 8 - DASD controller failed to " 901 "set or reset the long busy latch\n"); 902 break; 903 case 0x0A: 904 dev_warn(&device->cdev->dev, 905 "FORMAT 8 - No interruption from device " 906 "during a command chain\n"); 907 break; 908 default: 909 dev_warn(&device->cdev->dev, 910 "FORMAT 8 - Reserved\n"); 911 } 912 break; 913 914 case 0x90: /* Format 9 - Device Read, Write, and Seek Checks */ 915 switch (msg_no) { 916 case 0x00: 917 break; /* No Message */ 918 case 0x06: 919 dev_warn(&device->cdev->dev, 920 "FORMAT 9 - Device check-2 error\n"); 921 break; 922 case 0x07: 923 dev_warn(&device->cdev->dev, 924 "FORMAT 9 - Head address did not " 925 "compare\n"); 926 break; 927 case 0x0A: 928 dev_warn(&device->cdev->dev, 929 "FORMAT 9 - Track physical address did " 930 "not compare while oriented\n"); 931 break; 932 case 0x0E: 933 dev_warn(&device->cdev->dev, 934 "FORMAT 9 - Cylinder address did not " 935 "compare\n"); 936 break; 937 default: 938 dev_warn(&device->cdev->dev, 939 "FORMAT 9 - Reserved\n"); 940 } 941 break; 942 943 case 0xF0: /* Format F - Cache Storage Checks */ 944 switch (msg_no) { 945 case 0x00: 946 dev_warn(&device->cdev->dev, 947 "FORMAT F - Operation Terminated\n"); 948 break; 949 case 0x01: 950 dev_warn(&device->cdev->dev, 951 "FORMAT F - Subsystem Processing Error\n"); 952 break; 953 case 0x02: 954 dev_warn(&device->cdev->dev, 955 "FORMAT F - Cache or nonvolatile storage " 956 "equipment failure\n"); 957 break; 958 case 0x04: 959 dev_warn(&device->cdev->dev, 960 "FORMAT F - Caching terminated\n"); 961 break; 962 case 0x06: 963 dev_warn(&device->cdev->dev, 964 "FORMAT F - Cache fast write access not " 965 "authorized\n"); 966 break; 967 case 0x07: 968 dev_warn(&device->cdev->dev, 969 "FORMAT F - Track format incorrect\n"); 970 break; 971 case 0x09: 972 dev_warn(&device->cdev->dev, 973 "FORMAT F - Caching reinitiated\n"); 974 break; 975 case 0x0A: 976 dev_warn(&device->cdev->dev, 977 "FORMAT F - Nonvolatile storage " 978 "terminated\n"); 979 break; 980 case 0x0B: 981 dev_warn(&device->cdev->dev, 982 "FORMAT F - Volume is suspended duplex\n"); 983 /* call extended error reporting (EER) */ 984 dasd_eer_write(device, erp->refers, 985 DASD_EER_PPRCSUSPEND); 986 break; 987 case 0x0C: 988 dev_warn(&device->cdev->dev, 989 "FORMAT F - Subsystem status cannot be " 990 "determined\n"); 991 break; 992 case 0x0D: 993 dev_warn(&device->cdev->dev, 994 "FORMAT F - Caching status reset to " 995 "default\n"); 996 break; 997 case 0x0E: 998 dev_warn(&device->cdev->dev, 999 "FORMAT F - DASD Fast Write inhibited\n"); 1000 break; 1001 default: 1002 dev_warn(&device->cdev->dev, 1003 "FORMAT D - Reserved\n"); 1004 } 1005 break; 1006 1007 default: /* unknown message format - should not happen 1008 internal error 03 - unknown message format */ 1009 snprintf(errorstring, ERRORLENGTH, "03 %x02", msg_format); 1010 dev_err(&device->cdev->dev, 1011 "An error occurred in the DASD device driver, " 1012 "reason=%s\n", errorstring); 1013 break; 1014 } /* end switch message format */ 1015 1016 } /* end dasd_3990_handle_env_data */ 1017 1018 /* 1019 * DASD_3990_ERP_COM_REJ 1020 * 1021 * DESCRIPTION 1022 * Handles 24 byte 'Command Reject' error. 1023 * 1024 * PARAMETER 1025 * erp current erp_head 1026 * sense current sense data 1027 * 1028 * RETURN VALUES 1029 * erp 'new' erp_head - pointer to new ERP 1030 */ 1031 static struct dasd_ccw_req * 1032 dasd_3990_erp_com_rej(struct dasd_ccw_req * erp, char *sense) 1033 { 1034 1035 struct dasd_device *device = erp->startdev; 1036 1037 erp->function = dasd_3990_erp_com_rej; 1038 1039 /* env data present (ACTION 10 - retry should work) */ 1040 if (sense[2] & SNS2_ENV_DATA_PRESENT) { 1041 1042 DBF_DEV_EVENT(DBF_WARNING, device, "%s", 1043 "Command Reject - environmental data present"); 1044 1045 dasd_3990_handle_env_data(erp, sense); 1046 1047 erp->retries = 5; 1048 1049 } else if (sense[1] & SNS1_WRITE_INHIBITED) { 1050 dev_err(&device->cdev->dev, "An I/O request was rejected" 1051 " because writing is inhibited\n"); 1052 erp = dasd_3990_erp_cleanup(erp, DASD_CQR_FAILED); 1053 } else { 1054 /* fatal error - set status to FAILED 1055 internal error 09 - Command Reject */ 1056 dev_err(&device->cdev->dev, "An error occurred in the DASD " 1057 "device driver, reason=%s\n", "09"); 1058 1059 erp = dasd_3990_erp_cleanup(erp, DASD_CQR_FAILED); 1060 } 1061 1062 return erp; 1063 1064 } /* end dasd_3990_erp_com_rej */ 1065 1066 /* 1067 * DASD_3990_ERP_BUS_OUT 1068 * 1069 * DESCRIPTION 1070 * Handles 24 byte 'Bus Out Parity Check' error. 1071 * 1072 * PARAMETER 1073 * erp current erp_head 1074 * RETURN VALUES 1075 * erp new erp_head - pointer to new ERP 1076 */ 1077 static struct dasd_ccw_req * 1078 dasd_3990_erp_bus_out(struct dasd_ccw_req * erp) 1079 { 1080 1081 struct dasd_device *device = erp->startdev; 1082 1083 /* first time set initial retry counter and erp_function */ 1084 /* and retry once without blocking queue */ 1085 /* (this enables easier enqueing of the cqr) */ 1086 if (erp->function != dasd_3990_erp_bus_out) { 1087 erp->retries = 256; 1088 erp->function = dasd_3990_erp_bus_out; 1089 1090 } else { 1091 1092 /* issue a message and wait for 'device ready' interrupt */ 1093 DBF_DEV_EVENT(DBF_WARNING, device, "%s", 1094 "bus out parity error or BOPC requested by " 1095 "channel"); 1096 1097 dasd_3990_erp_block_queue(erp, 60*HZ); 1098 1099 } 1100 1101 return erp; 1102 1103 } /* end dasd_3990_erp_bus_out */ 1104 1105 /* 1106 * DASD_3990_ERP_EQUIP_CHECK 1107 * 1108 * DESCRIPTION 1109 * Handles 24 byte 'Equipment Check' error. 1110 * 1111 * PARAMETER 1112 * erp current erp_head 1113 * RETURN VALUES 1114 * erp new erp_head - pointer to new ERP 1115 */ 1116 static struct dasd_ccw_req * 1117 dasd_3990_erp_equip_check(struct dasd_ccw_req * erp, char *sense) 1118 { 1119 1120 struct dasd_device *device = erp->startdev; 1121 1122 erp->function = dasd_3990_erp_equip_check; 1123 1124 if (sense[1] & SNS1_WRITE_INHIBITED) { 1125 dev_info(&device->cdev->dev, 1126 "Write inhibited path encountered\n"); 1127 1128 /* vary path offline 1129 internal error 04 - Path should be varied off-line.*/ 1130 dev_err(&device->cdev->dev, "An error occurred in the DASD " 1131 "device driver, reason=%s\n", "04"); 1132 1133 erp = dasd_3990_erp_action_1(erp); 1134 1135 } else if (sense[2] & SNS2_ENV_DATA_PRESENT) { 1136 1137 DBF_DEV_EVENT(DBF_WARNING, device, "%s", 1138 "Equipment Check - " "environmental data present"); 1139 1140 dasd_3990_handle_env_data(erp, sense); 1141 1142 erp = dasd_3990_erp_action_4(erp, sense); 1143 1144 } else if (sense[1] & SNS1_PERM_ERR) { 1145 1146 DBF_DEV_EVENT(DBF_WARNING, device, "%s", 1147 "Equipment Check - retry exhausted or " 1148 "undesirable"); 1149 1150 erp = dasd_3990_erp_action_1(erp); 1151 1152 } else { 1153 /* all other equipment checks - Action 5 */ 1154 /* rest is done when retries == 0 */ 1155 DBF_DEV_EVENT(DBF_WARNING, device, "%s", 1156 "Equipment check or processing error"); 1157 1158 erp = dasd_3990_erp_action_5(erp); 1159 } 1160 return erp; 1161 1162 } /* end dasd_3990_erp_equip_check */ 1163 1164 /* 1165 * DASD_3990_ERP_DATA_CHECK 1166 * 1167 * DESCRIPTION 1168 * Handles 24 byte 'Data Check' error. 1169 * 1170 * PARAMETER 1171 * erp current erp_head 1172 * RETURN VALUES 1173 * erp new erp_head - pointer to new ERP 1174 */ 1175 static struct dasd_ccw_req * 1176 dasd_3990_erp_data_check(struct dasd_ccw_req * erp, char *sense) 1177 { 1178 1179 struct dasd_device *device = erp->startdev; 1180 1181 erp->function = dasd_3990_erp_data_check; 1182 1183 if (sense[2] & SNS2_CORRECTABLE) { /* correctable data check */ 1184 1185 /* issue message that the data has been corrected */ 1186 dev_emerg(&device->cdev->dev, 1187 "Data recovered during retry with PCI " 1188 "fetch mode active\n"); 1189 1190 /* not possible to handle this situation in Linux */ 1191 panic("No way to inform application about the possibly " 1192 "incorrect data"); 1193 1194 } else if (sense[2] & SNS2_ENV_DATA_PRESENT) { 1195 1196 DBF_DEV_EVENT(DBF_WARNING, device, "%s", 1197 "Uncorrectable data check recovered secondary " 1198 "addr of duplex pair"); 1199 1200 erp = dasd_3990_erp_action_4(erp, sense); 1201 1202 } else if (sense[1] & SNS1_PERM_ERR) { 1203 1204 DBF_DEV_EVENT(DBF_WARNING, device, "%s", 1205 "Uncorrectable data check with internal " 1206 "retry exhausted"); 1207 1208 erp = dasd_3990_erp_action_1(erp); 1209 1210 } else { 1211 /* all other data checks */ 1212 DBF_DEV_EVENT(DBF_WARNING, device, "%s", 1213 "Uncorrectable data check with retry count " 1214 "exhausted..."); 1215 1216 erp = dasd_3990_erp_action_5(erp); 1217 } 1218 1219 return erp; 1220 1221 } /* end dasd_3990_erp_data_check */ 1222 1223 /* 1224 * DASD_3990_ERP_OVERRUN 1225 * 1226 * DESCRIPTION 1227 * Handles 24 byte 'Overrun' error. 1228 * 1229 * PARAMETER 1230 * erp current erp_head 1231 * RETURN VALUES 1232 * erp new erp_head - pointer to new ERP 1233 */ 1234 static struct dasd_ccw_req * 1235 dasd_3990_erp_overrun(struct dasd_ccw_req * erp, char *sense) 1236 { 1237 1238 struct dasd_device *device = erp->startdev; 1239 1240 erp->function = dasd_3990_erp_overrun; 1241 1242 DBF_DEV_EVENT(DBF_WARNING, device, "%s", 1243 "Overrun - service overrun or overrun" 1244 " error requested by channel"); 1245 1246 erp = dasd_3990_erp_action_5(erp); 1247 1248 return erp; 1249 1250 } /* end dasd_3990_erp_overrun */ 1251 1252 /* 1253 * DASD_3990_ERP_INV_FORMAT 1254 * 1255 * DESCRIPTION 1256 * Handles 24 byte 'Invalid Track Format' error. 1257 * 1258 * PARAMETER 1259 * erp current erp_head 1260 * RETURN VALUES 1261 * erp new erp_head - pointer to new ERP 1262 */ 1263 static struct dasd_ccw_req * 1264 dasd_3990_erp_inv_format(struct dasd_ccw_req * erp, char *sense) 1265 { 1266 1267 struct dasd_device *device = erp->startdev; 1268 1269 erp->function = dasd_3990_erp_inv_format; 1270 1271 if (sense[2] & SNS2_ENV_DATA_PRESENT) { 1272 1273 DBF_DEV_EVENT(DBF_WARNING, device, "%s", 1274 "Track format error when destaging or " 1275 "staging data"); 1276 1277 dasd_3990_handle_env_data(erp, sense); 1278 1279 erp = dasd_3990_erp_action_4(erp, sense); 1280 1281 } else { 1282 /* internal error 06 - The track format is not valid*/ 1283 dev_err(&device->cdev->dev, 1284 "An error occurred in the DASD device driver, " 1285 "reason=%s\n", "06"); 1286 1287 erp = dasd_3990_erp_cleanup(erp, DASD_CQR_FAILED); 1288 } 1289 1290 return erp; 1291 1292 } /* end dasd_3990_erp_inv_format */ 1293 1294 /* 1295 * DASD_3990_ERP_EOC 1296 * 1297 * DESCRIPTION 1298 * Handles 24 byte 'End-of-Cylinder' error. 1299 * 1300 * PARAMETER 1301 * erp already added default erp 1302 * RETURN VALUES 1303 * erp pointer to original (failed) cqr. 1304 */ 1305 static struct dasd_ccw_req * 1306 dasd_3990_erp_EOC(struct dasd_ccw_req * default_erp, char *sense) 1307 { 1308 1309 struct dasd_device *device = default_erp->startdev; 1310 1311 dev_err(&device->cdev->dev, 1312 "The cylinder data for accessing the DASD is inconsistent\n"); 1313 1314 /* implement action 7 - BUG */ 1315 return dasd_3990_erp_cleanup(default_erp, DASD_CQR_FAILED); 1316 1317 } /* end dasd_3990_erp_EOC */ 1318 1319 /* 1320 * DASD_3990_ERP_ENV_DATA 1321 * 1322 * DESCRIPTION 1323 * Handles 24 byte 'Environmental-Data Present' error. 1324 * 1325 * PARAMETER 1326 * erp current erp_head 1327 * RETURN VALUES 1328 * erp new erp_head - pointer to new ERP 1329 */ 1330 static struct dasd_ccw_req * 1331 dasd_3990_erp_env_data(struct dasd_ccw_req * erp, char *sense) 1332 { 1333 1334 struct dasd_device *device = erp->startdev; 1335 1336 erp->function = dasd_3990_erp_env_data; 1337 1338 DBF_DEV_EVENT(DBF_WARNING, device, "%s", "Environmental data present"); 1339 1340 dasd_3990_handle_env_data(erp, sense); 1341 1342 /* don't retry on disabled interface */ 1343 if (sense[7] != 0x0F) { 1344 erp = dasd_3990_erp_action_4(erp, sense); 1345 } else { 1346 erp->status = DASD_CQR_FILLED; 1347 } 1348 1349 return erp; 1350 1351 } /* end dasd_3990_erp_env_data */ 1352 1353 /* 1354 * DASD_3990_ERP_NO_REC 1355 * 1356 * DESCRIPTION 1357 * Handles 24 byte 'No Record Found' error. 1358 * 1359 * PARAMETER 1360 * erp already added default ERP 1361 * 1362 * RETURN VALUES 1363 * erp new erp_head - pointer to new ERP 1364 */ 1365 static struct dasd_ccw_req * 1366 dasd_3990_erp_no_rec(struct dasd_ccw_req * default_erp, char *sense) 1367 { 1368 1369 struct dasd_device *device = default_erp->startdev; 1370 1371 dev_err(&device->cdev->dev, 1372 "The specified record was not found\n"); 1373 1374 return dasd_3990_erp_cleanup(default_erp, DASD_CQR_FAILED); 1375 1376 } /* end dasd_3990_erp_no_rec */ 1377 1378 /* 1379 * DASD_3990_ERP_FILE_PROT 1380 * 1381 * DESCRIPTION 1382 * Handles 24 byte 'File Protected' error. 1383 * Note: Seek related recovery is not implemented because 1384 * wee don't use the seek command yet. 1385 * 1386 * PARAMETER 1387 * erp current erp_head 1388 * RETURN VALUES 1389 * erp new erp_head - pointer to new ERP 1390 */ 1391 static struct dasd_ccw_req * 1392 dasd_3990_erp_file_prot(struct dasd_ccw_req * erp) 1393 { 1394 1395 struct dasd_device *device = erp->startdev; 1396 1397 dev_err(&device->cdev->dev, "Accessing the DASD failed because of " 1398 "a hardware error\n"); 1399 1400 return dasd_3990_erp_cleanup(erp, DASD_CQR_FAILED); 1401 1402 } /* end dasd_3990_erp_file_prot */ 1403 1404 /* 1405 * DASD_3990_ERP_INSPECT_ALIAS 1406 * 1407 * DESCRIPTION 1408 * Checks if the original request was started on an alias device. 1409 * If yes, it modifies the original and the erp request so that 1410 * the erp request can be started on a base device. 1411 * 1412 * PARAMETER 1413 * erp pointer to the currently created default ERP 1414 * 1415 * RETURN VALUES 1416 * erp pointer to the modified ERP, or NULL 1417 */ 1418 1419 static struct dasd_ccw_req *dasd_3990_erp_inspect_alias( 1420 struct dasd_ccw_req *erp) 1421 { 1422 struct dasd_ccw_req *cqr = erp->refers; 1423 char *sense; 1424 1425 if (cqr->block && 1426 (cqr->block->base != cqr->startdev)) { 1427 1428 sense = dasd_get_sense(&erp->refers->irb); 1429 /* 1430 * dynamic pav may have changed base alias mapping 1431 */ 1432 if (!test_bit(DASD_FLAG_OFFLINE, &cqr->startdev->flags) && sense 1433 && (sense[0] == 0x10) && (sense[7] == 0x0F) 1434 && (sense[8] == 0x67)) { 1435 /* 1436 * remove device from alias handling to prevent new 1437 * requests from being scheduled on the 1438 * wrong alias device 1439 */ 1440 dasd_alias_remove_device(cqr->startdev); 1441 1442 /* schedule worker to reload device */ 1443 dasd_reload_device(cqr->startdev); 1444 } 1445 1446 if (cqr->startdev->features & DASD_FEATURE_ERPLOG) { 1447 DBF_DEV_EVENT(DBF_ERR, cqr->startdev, 1448 "ERP on alias device for request %p," 1449 " recover on base device %s", cqr, 1450 dev_name(&cqr->block->base->cdev->dev)); 1451 } 1452 dasd_eckd_reset_ccw_to_base_io(cqr); 1453 erp->startdev = cqr->block->base; 1454 erp->function = dasd_3990_erp_inspect_alias; 1455 return erp; 1456 } else 1457 return NULL; 1458 } 1459 1460 1461 /* 1462 * DASD_3990_ERP_INSPECT_24 1463 * 1464 * DESCRIPTION 1465 * Does a detailed inspection of the 24 byte sense data 1466 * and sets up a related error recovery action. 1467 * 1468 * PARAMETER 1469 * sense sense data of the actual error 1470 * erp pointer to the currently created default ERP 1471 * 1472 * RETURN VALUES 1473 * erp pointer to the (addtitional) ERP 1474 */ 1475 static struct dasd_ccw_req * 1476 dasd_3990_erp_inspect_24(struct dasd_ccw_req * erp, char *sense) 1477 { 1478 1479 struct dasd_ccw_req *erp_filled = NULL; 1480 1481 /* Check sense for .... */ 1482 /* 'Command Reject' */ 1483 if ((erp_filled == NULL) && (sense[0] & SNS0_CMD_REJECT)) { 1484 erp_filled = dasd_3990_erp_com_rej(erp, sense); 1485 } 1486 /* 'Intervention Required' */ 1487 if ((erp_filled == NULL) && (sense[0] & SNS0_INTERVENTION_REQ)) { 1488 erp_filled = dasd_3990_erp_int_req(erp); 1489 } 1490 /* 'Bus Out Parity Check' */ 1491 if ((erp_filled == NULL) && (sense[0] & SNS0_BUS_OUT_CHECK)) { 1492 erp_filled = dasd_3990_erp_bus_out(erp); 1493 } 1494 /* 'Equipment Check' */ 1495 if ((erp_filled == NULL) && (sense[0] & SNS0_EQUIPMENT_CHECK)) { 1496 erp_filled = dasd_3990_erp_equip_check(erp, sense); 1497 } 1498 /* 'Data Check' */ 1499 if ((erp_filled == NULL) && (sense[0] & SNS0_DATA_CHECK)) { 1500 erp_filled = dasd_3990_erp_data_check(erp, sense); 1501 } 1502 /* 'Overrun' */ 1503 if ((erp_filled == NULL) && (sense[0] & SNS0_OVERRUN)) { 1504 erp_filled = dasd_3990_erp_overrun(erp, sense); 1505 } 1506 /* 'Invalid Track Format' */ 1507 if ((erp_filled == NULL) && (sense[1] & SNS1_INV_TRACK_FORMAT)) { 1508 erp_filled = dasd_3990_erp_inv_format(erp, sense); 1509 } 1510 /* 'End-of-Cylinder' */ 1511 if ((erp_filled == NULL) && (sense[1] & SNS1_EOC)) { 1512 erp_filled = dasd_3990_erp_EOC(erp, sense); 1513 } 1514 /* 'Environmental Data' */ 1515 if ((erp_filled == NULL) && (sense[2] & SNS2_ENV_DATA_PRESENT)) { 1516 erp_filled = dasd_3990_erp_env_data(erp, sense); 1517 } 1518 /* 'No Record Found' */ 1519 if ((erp_filled == NULL) && (sense[1] & SNS1_NO_REC_FOUND)) { 1520 erp_filled = dasd_3990_erp_no_rec(erp, sense); 1521 } 1522 /* 'File Protected' */ 1523 if ((erp_filled == NULL) && (sense[1] & SNS1_FILE_PROTECTED)) { 1524 erp_filled = dasd_3990_erp_file_prot(erp); 1525 } 1526 /* other (unknown) error - do default ERP */ 1527 if (erp_filled == NULL) { 1528 1529 erp_filled = erp; 1530 } 1531 1532 return erp_filled; 1533 1534 } /* END dasd_3990_erp_inspect_24 */ 1535 1536 /* 1537 ***************************************************************************** 1538 * 32 byte sense ERP functions (only) 1539 ***************************************************************************** 1540 */ 1541 1542 /* 1543 * DASD_3990_ERPACTION_10_32 1544 * 1545 * DESCRIPTION 1546 * Handles 32 byte 'Action 10' of Single Program Action Codes. 1547 * Just retry and if retry doesn't work, return with error. 1548 * 1549 * PARAMETER 1550 * erp current erp_head 1551 * sense current sense data 1552 * RETURN VALUES 1553 * erp modified erp_head 1554 */ 1555 static struct dasd_ccw_req * 1556 dasd_3990_erp_action_10_32(struct dasd_ccw_req * erp, char *sense) 1557 { 1558 1559 struct dasd_device *device = erp->startdev; 1560 1561 erp->retries = 256; 1562 erp->function = dasd_3990_erp_action_10_32; 1563 1564 DBF_DEV_EVENT(DBF_WARNING, device, "%s", "Perform logging requested"); 1565 1566 return erp; 1567 1568 } /* end dasd_3990_erp_action_10_32 */ 1569 1570 /* 1571 * DASD_3990_ERP_ACTION_1B_32 1572 * 1573 * DESCRIPTION 1574 * Handles 32 byte 'Action 1B' of Single Program Action Codes. 1575 * A write operation could not be finished because of an unexpected 1576 * condition. 1577 * The already created 'default erp' is used to get the link to 1578 * the erp chain, but it can not be used for this recovery 1579 * action because it contains no DE/LO data space. 1580 * 1581 * PARAMETER 1582 * default_erp already added default erp. 1583 * sense current sense data 1584 * 1585 * RETURN VALUES 1586 * erp new erp or 1587 * default_erp in case of imprecise ending or error 1588 */ 1589 static struct dasd_ccw_req * 1590 dasd_3990_erp_action_1B_32(struct dasd_ccw_req * default_erp, char *sense) 1591 { 1592 1593 struct dasd_device *device = default_erp->startdev; 1594 __u32 cpa = 0; 1595 struct dasd_ccw_req *cqr; 1596 struct dasd_ccw_req *erp; 1597 struct DE_eckd_data *DE_data; 1598 struct PFX_eckd_data *PFX_data; 1599 char *LO_data; /* LO_eckd_data_t */ 1600 struct ccw1 *ccw, *oldccw; 1601 1602 DBF_DEV_EVENT(DBF_WARNING, device, "%s", 1603 "Write not finished because of unexpected condition"); 1604 1605 default_erp->function = dasd_3990_erp_action_1B_32; 1606 1607 /* determine the original cqr */ 1608 cqr = default_erp; 1609 1610 while (cqr->refers != NULL) { 1611 cqr = cqr->refers; 1612 } 1613 1614 if (scsw_is_tm(&cqr->irb.scsw)) { 1615 DBF_DEV_EVENT(DBF_WARNING, device, "%s", 1616 "32 bit sense, action 1B is not defined" 1617 " in transport mode - just retry"); 1618 return default_erp; 1619 } 1620 1621 /* for imprecise ending just do default erp */ 1622 if (sense[1] & 0x01) { 1623 DBF_DEV_EVENT(DBF_WARNING, device, "%s", 1624 "Imprecise ending is set - just retry"); 1625 1626 return default_erp; 1627 } 1628 1629 /* determine the address of the CCW to be restarted */ 1630 /* Imprecise ending is not set -> addr from IRB-SCSW */ 1631 cpa = default_erp->refers->irb.scsw.cmd.cpa; 1632 1633 if (cpa == 0) { 1634 DBF_DEV_EVENT(DBF_WARNING, device, "%s", 1635 "Unable to determine address of the CCW " 1636 "to be restarted"); 1637 1638 return dasd_3990_erp_cleanup(default_erp, DASD_CQR_FAILED); 1639 } 1640 1641 /* Build new ERP request including DE/LO */ 1642 erp = dasd_alloc_erp_request((char *) &cqr->magic, 1643 2 + 1,/* DE/LO + TIC */ 1644 sizeof(struct DE_eckd_data) + 1645 sizeof(struct LO_eckd_data), device); 1646 1647 if (IS_ERR(erp)) { 1648 /* internal error 01 - Unable to allocate ERP */ 1649 dev_err(&device->cdev->dev, "An error occurred in the DASD " 1650 "device driver, reason=%s\n", "01"); 1651 return dasd_3990_erp_cleanup(default_erp, DASD_CQR_FAILED); 1652 } 1653 1654 /* use original DE */ 1655 DE_data = erp->data; 1656 oldccw = cqr->cpaddr; 1657 if (oldccw->cmd_code == DASD_ECKD_CCW_PFX) { 1658 PFX_data = cqr->data; 1659 memcpy(DE_data, &PFX_data->define_extent, 1660 sizeof(struct DE_eckd_data)); 1661 } else 1662 memcpy(DE_data, cqr->data, sizeof(struct DE_eckd_data)); 1663 1664 /* create LO */ 1665 LO_data = erp->data + sizeof(struct DE_eckd_data); 1666 1667 if ((sense[3] == 0x01) && (LO_data[1] & 0x01)) { 1668 /* should not */ 1669 return dasd_3990_erp_cleanup(default_erp, DASD_CQR_FAILED); 1670 } 1671 1672 if ((sense[7] & 0x3F) == 0x01) { 1673 /* operation code is WRITE DATA -> data area orientation */ 1674 LO_data[0] = 0x81; 1675 1676 } else if ((sense[7] & 0x3F) == 0x03) { 1677 /* operation code is FORMAT WRITE -> index orientation */ 1678 LO_data[0] = 0xC3; 1679 1680 } else { 1681 LO_data[0] = sense[7]; /* operation */ 1682 } 1683 1684 LO_data[1] = sense[8]; /* auxiliary */ 1685 LO_data[2] = sense[9]; 1686 LO_data[3] = sense[3]; /* count */ 1687 LO_data[4] = sense[29]; /* seek_addr.cyl */ 1688 LO_data[5] = sense[30]; /* seek_addr.cyl 2nd byte */ 1689 LO_data[7] = sense[31]; /* seek_addr.head 2nd byte */ 1690 1691 memcpy(&(LO_data[8]), &(sense[11]), 8); 1692 1693 /* create DE ccw */ 1694 ccw = erp->cpaddr; 1695 memset(ccw, 0, sizeof(struct ccw1)); 1696 ccw->cmd_code = DASD_ECKD_CCW_DEFINE_EXTENT; 1697 ccw->flags = CCW_FLAG_CC; 1698 ccw->count = 16; 1699 ccw->cda = (__u32)(addr_t) DE_data; 1700 1701 /* create LO ccw */ 1702 ccw++; 1703 memset(ccw, 0, sizeof(struct ccw1)); 1704 ccw->cmd_code = DASD_ECKD_CCW_LOCATE_RECORD; 1705 ccw->flags = CCW_FLAG_CC; 1706 ccw->count = 16; 1707 ccw->cda = (__u32)(addr_t) LO_data; 1708 1709 /* TIC to the failed ccw */ 1710 ccw++; 1711 ccw->cmd_code = CCW_CMD_TIC; 1712 ccw->cda = cpa; 1713 1714 /* fill erp related fields */ 1715 erp->flags = default_erp->flags; 1716 erp->function = dasd_3990_erp_action_1B_32; 1717 erp->refers = default_erp->refers; 1718 erp->startdev = device; 1719 erp->memdev = device; 1720 erp->magic = default_erp->magic; 1721 erp->expires = default_erp->expires; 1722 erp->retries = 256; 1723 erp->buildclk = get_clock(); 1724 erp->status = DASD_CQR_FILLED; 1725 1726 /* remove the default erp */ 1727 dasd_free_erp_request(default_erp, device); 1728 1729 return erp; 1730 1731 } /* end dasd_3990_erp_action_1B_32 */ 1732 1733 /* 1734 * DASD_3990_UPDATE_1B 1735 * 1736 * DESCRIPTION 1737 * Handles the update to the 32 byte 'Action 1B' of Single Program 1738 * Action Codes in case the first action was not successful. 1739 * The already created 'previous_erp' is the currently not successful 1740 * ERP. 1741 * 1742 * PARAMETER 1743 * previous_erp already created previous erp. 1744 * sense current sense data 1745 * RETURN VALUES 1746 * erp modified erp 1747 */ 1748 static struct dasd_ccw_req * 1749 dasd_3990_update_1B(struct dasd_ccw_req * previous_erp, char *sense) 1750 { 1751 1752 struct dasd_device *device = previous_erp->startdev; 1753 __u32 cpa = 0; 1754 struct dasd_ccw_req *cqr; 1755 struct dasd_ccw_req *erp; 1756 char *LO_data; /* struct LO_eckd_data */ 1757 struct ccw1 *ccw; 1758 1759 DBF_DEV_EVENT(DBF_WARNING, device, "%s", 1760 "Write not finished because of unexpected condition" 1761 " - follow on"); 1762 1763 /* determine the original cqr */ 1764 cqr = previous_erp; 1765 1766 while (cqr->refers != NULL) { 1767 cqr = cqr->refers; 1768 } 1769 1770 if (scsw_is_tm(&cqr->irb.scsw)) { 1771 DBF_DEV_EVENT(DBF_WARNING, device, "%s", 1772 "32 bit sense, action 1B, update," 1773 " in transport mode - just retry"); 1774 return previous_erp; 1775 } 1776 1777 /* for imprecise ending just do default erp */ 1778 if (sense[1] & 0x01) { 1779 DBF_DEV_EVENT(DBF_WARNING, device, "%s", 1780 "Imprecise ending is set - just retry"); 1781 1782 previous_erp->status = DASD_CQR_FILLED; 1783 1784 return previous_erp; 1785 } 1786 1787 /* determine the address of the CCW to be restarted */ 1788 /* Imprecise ending is not set -> addr from IRB-SCSW */ 1789 cpa = previous_erp->irb.scsw.cmd.cpa; 1790 1791 if (cpa == 0) { 1792 /* internal error 02 - 1793 Unable to determine address of the CCW to be restarted */ 1794 dev_err(&device->cdev->dev, "An error occurred in the DASD " 1795 "device driver, reason=%s\n", "02"); 1796 1797 previous_erp->status = DASD_CQR_FAILED; 1798 1799 return previous_erp; 1800 } 1801 1802 erp = previous_erp; 1803 1804 /* update the LO with the new returned sense data */ 1805 LO_data = erp->data + sizeof(struct DE_eckd_data); 1806 1807 if ((sense[3] == 0x01) && (LO_data[1] & 0x01)) { 1808 /* should not happen */ 1809 previous_erp->status = DASD_CQR_FAILED; 1810 1811 return previous_erp; 1812 } 1813 1814 if ((sense[7] & 0x3F) == 0x01) { 1815 /* operation code is WRITE DATA -> data area orientation */ 1816 LO_data[0] = 0x81; 1817 1818 } else if ((sense[7] & 0x3F) == 0x03) { 1819 /* operation code is FORMAT WRITE -> index orientation */ 1820 LO_data[0] = 0xC3; 1821 1822 } else { 1823 LO_data[0] = sense[7]; /* operation */ 1824 } 1825 1826 LO_data[1] = sense[8]; /* auxiliary */ 1827 LO_data[2] = sense[9]; 1828 LO_data[3] = sense[3]; /* count */ 1829 LO_data[4] = sense[29]; /* seek_addr.cyl */ 1830 LO_data[5] = sense[30]; /* seek_addr.cyl 2nd byte */ 1831 LO_data[7] = sense[31]; /* seek_addr.head 2nd byte */ 1832 1833 memcpy(&(LO_data[8]), &(sense[11]), 8); 1834 1835 /* TIC to the failed ccw */ 1836 ccw = erp->cpaddr; /* addr of DE ccw */ 1837 ccw++; /* addr of LE ccw */ 1838 ccw++; /* addr of TIC ccw */ 1839 ccw->cda = cpa; 1840 1841 erp->status = DASD_CQR_FILLED; 1842 1843 return erp; 1844 1845 } /* end dasd_3990_update_1B */ 1846 1847 /* 1848 * DASD_3990_ERP_COMPOUND_RETRY 1849 * 1850 * DESCRIPTION 1851 * Handles the compound ERP action retry code. 1852 * NOTE: At least one retry is done even if zero is specified 1853 * by the sense data. This makes enqueueing of the request 1854 * easier. 1855 * 1856 * PARAMETER 1857 * sense sense data of the actual error 1858 * erp pointer to the currently created ERP 1859 * 1860 * RETURN VALUES 1861 * erp modified ERP pointer 1862 * 1863 */ 1864 static void 1865 dasd_3990_erp_compound_retry(struct dasd_ccw_req * erp, char *sense) 1866 { 1867 1868 switch (sense[25] & 0x03) { 1869 case 0x00: /* no not retry */ 1870 erp->retries = 1; 1871 break; 1872 1873 case 0x01: /* retry 2 times */ 1874 erp->retries = 2; 1875 break; 1876 1877 case 0x02: /* retry 10 times */ 1878 erp->retries = 10; 1879 break; 1880 1881 case 0x03: /* retry 256 times */ 1882 erp->retries = 256; 1883 break; 1884 1885 default: 1886 BUG(); 1887 } 1888 1889 erp->function = dasd_3990_erp_compound_retry; 1890 1891 } /* end dasd_3990_erp_compound_retry */ 1892 1893 /* 1894 * DASD_3990_ERP_COMPOUND_PATH 1895 * 1896 * DESCRIPTION 1897 * Handles the compound ERP action for retry on alternate 1898 * channel path. 1899 * 1900 * PARAMETER 1901 * sense sense data of the actual error 1902 * erp pointer to the currently created ERP 1903 * 1904 * RETURN VALUES 1905 * erp modified ERP pointer 1906 * 1907 */ 1908 static void 1909 dasd_3990_erp_compound_path(struct dasd_ccw_req * erp, char *sense) 1910 { 1911 if (sense[25] & DASD_SENSE_BIT_3) { 1912 dasd_3990_erp_alternate_path(erp); 1913 1914 if (erp->status == DASD_CQR_FAILED && 1915 !test_bit(DASD_CQR_VERIFY_PATH, &erp->flags)) { 1916 /* reset the lpm and the status to be able to 1917 * try further actions. */ 1918 erp->lpm = erp->startdev->path_data.opm; 1919 erp->status = DASD_CQR_NEED_ERP; 1920 } 1921 } 1922 1923 erp->function = dasd_3990_erp_compound_path; 1924 1925 } /* end dasd_3990_erp_compound_path */ 1926 1927 /* 1928 * DASD_3990_ERP_COMPOUND_CODE 1929 * 1930 * DESCRIPTION 1931 * Handles the compound ERP action for retry code. 1932 * 1933 * PARAMETER 1934 * sense sense data of the actual error 1935 * erp pointer to the currently created ERP 1936 * 1937 * RETURN VALUES 1938 * erp NEW ERP pointer 1939 * 1940 */ 1941 static struct dasd_ccw_req * 1942 dasd_3990_erp_compound_code(struct dasd_ccw_req * erp, char *sense) 1943 { 1944 1945 if (sense[25] & DASD_SENSE_BIT_2) { 1946 1947 switch (sense[28]) { 1948 case 0x17: 1949 /* issue a Diagnostic Control command with an 1950 * Inhibit Write subcommand and controller modifier */ 1951 erp = dasd_3990_erp_DCTL(erp, 0x20); 1952 break; 1953 1954 case 0x25: 1955 /* wait for 5 seconds and retry again */ 1956 erp->retries = 1; 1957 1958 dasd_3990_erp_block_queue (erp, 5*HZ); 1959 break; 1960 1961 default: 1962 /* should not happen - continue */ 1963 break; 1964 } 1965 } 1966 1967 erp->function = dasd_3990_erp_compound_code; 1968 1969 return erp; 1970 1971 } /* end dasd_3990_erp_compound_code */ 1972 1973 /* 1974 * DASD_3990_ERP_COMPOUND_CONFIG 1975 * 1976 * DESCRIPTION 1977 * Handles the compound ERP action for configruation 1978 * dependent error. 1979 * Note: duplex handling is not implemented (yet). 1980 * 1981 * PARAMETER 1982 * sense sense data of the actual error 1983 * erp pointer to the currently created ERP 1984 * 1985 * RETURN VALUES 1986 * erp modified ERP pointer 1987 * 1988 */ 1989 static void 1990 dasd_3990_erp_compound_config(struct dasd_ccw_req * erp, char *sense) 1991 { 1992 1993 if ((sense[25] & DASD_SENSE_BIT_1) && (sense[26] & DASD_SENSE_BIT_2)) { 1994 1995 /* set to suspended duplex state then restart 1996 internal error 05 - Set device to suspended duplex state 1997 should be done */ 1998 struct dasd_device *device = erp->startdev; 1999 dev_err(&device->cdev->dev, 2000 "An error occurred in the DASD device driver, " 2001 "reason=%s\n", "05"); 2002 2003 } 2004 2005 erp->function = dasd_3990_erp_compound_config; 2006 2007 } /* end dasd_3990_erp_compound_config */ 2008 2009 /* 2010 * DASD_3990_ERP_COMPOUND 2011 * 2012 * DESCRIPTION 2013 * Does the further compound program action if 2014 * compound retry was not successful. 2015 * 2016 * PARAMETER 2017 * sense sense data of the actual error 2018 * erp pointer to the current (failed) ERP 2019 * 2020 * RETURN VALUES 2021 * erp (additional) ERP pointer 2022 * 2023 */ 2024 static struct dasd_ccw_req * 2025 dasd_3990_erp_compound(struct dasd_ccw_req * erp, char *sense) 2026 { 2027 2028 if ((erp->function == dasd_3990_erp_compound_retry) && 2029 (erp->status == DASD_CQR_NEED_ERP)) { 2030 2031 dasd_3990_erp_compound_path(erp, sense); 2032 } 2033 2034 if ((erp->function == dasd_3990_erp_compound_path) && 2035 (erp->status == DASD_CQR_NEED_ERP)) { 2036 2037 erp = dasd_3990_erp_compound_code(erp, sense); 2038 } 2039 2040 if ((erp->function == dasd_3990_erp_compound_code) && 2041 (erp->status == DASD_CQR_NEED_ERP)) { 2042 2043 dasd_3990_erp_compound_config(erp, sense); 2044 } 2045 2046 /* if no compound action ERP specified, the request failed */ 2047 if (erp->status == DASD_CQR_NEED_ERP) 2048 erp->status = DASD_CQR_FAILED; 2049 2050 return erp; 2051 2052 } /* end dasd_3990_erp_compound */ 2053 2054 /* 2055 *DASD_3990_ERP_HANDLE_SIM 2056 * 2057 *DESCRIPTION 2058 * inspects the SIM SENSE data and starts an appropriate action 2059 * 2060 * PARAMETER 2061 * sense sense data of the actual error 2062 * 2063 * RETURN VALUES 2064 * none 2065 */ 2066 void 2067 dasd_3990_erp_handle_sim(struct dasd_device *device, char *sense) 2068 { 2069 /* print message according to log or message to operator mode */ 2070 if ((sense[24] & DASD_SIM_MSG_TO_OP) || (sense[1] & 0x10)) { 2071 /* print SIM SRC from RefCode */ 2072 dev_err(&device->cdev->dev, "SIM - SRC: " 2073 "%02x%02x%02x%02x\n", sense[22], 2074 sense[23], sense[11], sense[12]); 2075 } else if (sense[24] & DASD_SIM_LOG) { 2076 /* print SIM SRC Refcode */ 2077 dev_warn(&device->cdev->dev, "log SIM - SRC: " 2078 "%02x%02x%02x%02x\n", sense[22], 2079 sense[23], sense[11], sense[12]); 2080 } 2081 } 2082 2083 /* 2084 * DASD_3990_ERP_INSPECT_32 2085 * 2086 * DESCRIPTION 2087 * Does a detailed inspection of the 32 byte sense data 2088 * and sets up a related error recovery action. 2089 * 2090 * PARAMETER 2091 * sense sense data of the actual error 2092 * erp pointer to the currently created default ERP 2093 * 2094 * RETURN VALUES 2095 * erp_filled pointer to the ERP 2096 * 2097 */ 2098 static struct dasd_ccw_req * 2099 dasd_3990_erp_inspect_32(struct dasd_ccw_req * erp, char *sense) 2100 { 2101 2102 struct dasd_device *device = erp->startdev; 2103 2104 erp->function = dasd_3990_erp_inspect_32; 2105 2106 /* check for SIM sense data */ 2107 if ((sense[6] & DASD_SIM_SENSE) == DASD_SIM_SENSE) 2108 dasd_3990_erp_handle_sim(device, sense); 2109 2110 if (sense[25] & DASD_SENSE_BIT_0) { 2111 2112 /* compound program action codes (byte25 bit 0 == '1') */ 2113 dasd_3990_erp_compound_retry(erp, sense); 2114 2115 } else { 2116 2117 /* single program action codes (byte25 bit 0 == '0') */ 2118 switch (sense[25]) { 2119 2120 case 0x00: /* success - use default ERP for retries */ 2121 DBF_DEV_EVENT(DBF_DEBUG, device, "%s", 2122 "ERP called for successful request" 2123 " - just retry"); 2124 break; 2125 2126 case 0x01: /* fatal error */ 2127 dev_err(&device->cdev->dev, 2128 "ERP failed for the DASD\n"); 2129 2130 erp = dasd_3990_erp_cleanup(erp, DASD_CQR_FAILED); 2131 break; 2132 2133 case 0x02: /* intervention required */ 2134 case 0x03: /* intervention required during dual copy */ 2135 erp = dasd_3990_erp_int_req(erp); 2136 break; 2137 2138 case 0x0F: /* length mismatch during update write command 2139 internal error 08 - update write command error*/ 2140 dev_err(&device->cdev->dev, "An error occurred in the " 2141 "DASD device driver, reason=%s\n", "08"); 2142 2143 erp = dasd_3990_erp_cleanup(erp, DASD_CQR_FAILED); 2144 break; 2145 2146 case 0x10: /* logging required for other channel program */ 2147 erp = dasd_3990_erp_action_10_32(erp, sense); 2148 break; 2149 2150 case 0x15: /* next track outside defined extend 2151 internal error 07 - The next track is not 2152 within the defined storage extent */ 2153 dev_err(&device->cdev->dev, 2154 "An error occurred in the DASD device driver, " 2155 "reason=%s\n", "07"); 2156 2157 erp = dasd_3990_erp_cleanup(erp, DASD_CQR_FAILED); 2158 break; 2159 2160 case 0x1B: /* unexpected condition during write */ 2161 2162 erp = dasd_3990_erp_action_1B_32(erp, sense); 2163 break; 2164 2165 case 0x1C: /* invalid data */ 2166 dev_emerg(&device->cdev->dev, 2167 "Data recovered during retry with PCI " 2168 "fetch mode active\n"); 2169 2170 /* not possible to handle this situation in Linux */ 2171 panic 2172 ("Invalid data - No way to inform application " 2173 "about the possibly incorrect data"); 2174 break; 2175 2176 case 0x1D: /* state-change pending */ 2177 DBF_DEV_EVENT(DBF_WARNING, device, "%s", 2178 "A State change pending condition exists " 2179 "for the subsystem or device"); 2180 2181 erp = dasd_3990_erp_action_4(erp, sense); 2182 break; 2183 2184 case 0x1E: /* busy */ 2185 DBF_DEV_EVENT(DBF_WARNING, device, "%s", 2186 "Busy condition exists " 2187 "for the subsystem or device"); 2188 erp = dasd_3990_erp_action_4(erp, sense); 2189 break; 2190 2191 default: /* all others errors - default erp */ 2192 break; 2193 } 2194 } 2195 2196 return erp; 2197 2198 } /* end dasd_3990_erp_inspect_32 */ 2199 2200 /* 2201 ***************************************************************************** 2202 * main ERP control functions (24 and 32 byte sense) 2203 ***************************************************************************** 2204 */ 2205 2206 /* 2207 * DASD_3990_ERP_CONTROL_CHECK 2208 * 2209 * DESCRIPTION 2210 * Does a generic inspection if a control check occurred and sets up 2211 * the related error recovery procedure 2212 * 2213 * PARAMETER 2214 * erp pointer to the currently created default ERP 2215 * 2216 * RETURN VALUES 2217 * erp_filled pointer to the erp 2218 */ 2219 2220 static struct dasd_ccw_req * 2221 dasd_3990_erp_control_check(struct dasd_ccw_req *erp) 2222 { 2223 struct dasd_device *device = erp->startdev; 2224 2225 if (scsw_cstat(&erp->refers->irb.scsw) & (SCHN_STAT_INTF_CTRL_CHK 2226 | SCHN_STAT_CHN_CTRL_CHK)) { 2227 DBF_DEV_EVENT(DBF_WARNING, device, "%s", 2228 "channel or interface control check"); 2229 erp = dasd_3990_erp_action_4(erp, NULL); 2230 } 2231 return erp; 2232 } 2233 2234 /* 2235 * DASD_3990_ERP_INSPECT 2236 * 2237 * DESCRIPTION 2238 * Does a detailed inspection for sense data by calling either 2239 * the 24-byte or the 32-byte inspection routine. 2240 * 2241 * PARAMETER 2242 * erp pointer to the currently created default ERP 2243 * RETURN VALUES 2244 * erp_new contens was possibly modified 2245 */ 2246 static struct dasd_ccw_req * 2247 dasd_3990_erp_inspect(struct dasd_ccw_req *erp) 2248 { 2249 2250 struct dasd_ccw_req *erp_new = NULL; 2251 char *sense; 2252 2253 /* if this problem occurred on an alias retry on base */ 2254 erp_new = dasd_3990_erp_inspect_alias(erp); 2255 if (erp_new) 2256 return erp_new; 2257 2258 /* sense data are located in the refers record of the 2259 * already set up new ERP ! 2260 * check if concurrent sens is available 2261 */ 2262 sense = dasd_get_sense(&erp->refers->irb); 2263 if (!sense) 2264 erp_new = dasd_3990_erp_control_check(erp); 2265 /* distinguish between 24 and 32 byte sense data */ 2266 else if (sense[27] & DASD_SENSE_BIT_0) { 2267 2268 /* inspect the 24 byte sense data */ 2269 erp_new = dasd_3990_erp_inspect_24(erp, sense); 2270 2271 } else { 2272 2273 /* inspect the 32 byte sense data */ 2274 erp_new = dasd_3990_erp_inspect_32(erp, sense); 2275 2276 } /* end distinguish between 24 and 32 byte sense data */ 2277 2278 return erp_new; 2279 } 2280 2281 /* 2282 * DASD_3990_ERP_ADD_ERP 2283 * 2284 * DESCRIPTION 2285 * This function adds an additional request block (ERP) to the head of 2286 * the given cqr (or erp). 2287 * For a command mode cqr the erp is initialized as an default erp 2288 * (retry TIC). 2289 * For transport mode we make a copy of the original TCW (points to 2290 * the original TCCB, TIDALs, etc.) but give it a fresh 2291 * TSB so the original sense data will not be changed. 2292 * 2293 * PARAMETER 2294 * cqr head of the current ERP-chain (or single cqr if 2295 * first error) 2296 * RETURN VALUES 2297 * erp pointer to new ERP-chain head 2298 */ 2299 static struct dasd_ccw_req *dasd_3990_erp_add_erp(struct dasd_ccw_req *cqr) 2300 { 2301 2302 struct dasd_device *device = cqr->startdev; 2303 struct ccw1 *ccw; 2304 struct dasd_ccw_req *erp; 2305 int cplength, datasize; 2306 struct tcw *tcw; 2307 struct tsb *tsb; 2308 2309 if (cqr->cpmode == 1) { 2310 cplength = 0; 2311 /* TCW needs to be 64 byte aligned, so leave enough room */ 2312 datasize = 64 + sizeof(struct tcw) + sizeof(struct tsb); 2313 } else { 2314 cplength = 2; 2315 datasize = 0; 2316 } 2317 2318 /* allocate additional request block */ 2319 erp = dasd_alloc_erp_request((char *) &cqr->magic, 2320 cplength, datasize, device); 2321 if (IS_ERR(erp)) { 2322 if (cqr->retries <= 0) { 2323 DBF_DEV_EVENT(DBF_ERR, device, "%s", 2324 "Unable to allocate ERP request"); 2325 cqr->status = DASD_CQR_FAILED; 2326 cqr->stopclk = get_clock (); 2327 } else { 2328 DBF_DEV_EVENT(DBF_ERR, device, 2329 "Unable to allocate ERP request " 2330 "(%i retries left)", 2331 cqr->retries); 2332 dasd_block_set_timer(device->block, (HZ << 3)); 2333 } 2334 return erp; 2335 } 2336 2337 ccw = cqr->cpaddr; 2338 if (cqr->cpmode == 1) { 2339 /* make a shallow copy of the original tcw but set new tsb */ 2340 erp->cpmode = 1; 2341 erp->cpaddr = PTR_ALIGN(erp->data, 64); 2342 tcw = erp->cpaddr; 2343 tsb = (struct tsb *) &tcw[1]; 2344 *tcw = *((struct tcw *)cqr->cpaddr); 2345 tcw->tsb = (long)tsb; 2346 } else if (ccw->cmd_code == DASD_ECKD_CCW_PSF) { 2347 /* PSF cannot be chained from NOOP/TIC */ 2348 erp->cpaddr = cqr->cpaddr; 2349 } else { 2350 /* initialize request with default TIC to current ERP/CQR */ 2351 ccw = erp->cpaddr; 2352 ccw->cmd_code = CCW_CMD_NOOP; 2353 ccw->flags = CCW_FLAG_CC; 2354 ccw++; 2355 ccw->cmd_code = CCW_CMD_TIC; 2356 ccw->cda = (long)(cqr->cpaddr); 2357 } 2358 2359 erp->flags = cqr->flags; 2360 erp->function = dasd_3990_erp_add_erp; 2361 erp->refers = cqr; 2362 erp->startdev = device; 2363 erp->memdev = device; 2364 erp->block = cqr->block; 2365 erp->magic = cqr->magic; 2366 erp->expires = cqr->expires; 2367 erp->retries = 256; 2368 erp->buildclk = get_clock(); 2369 erp->status = DASD_CQR_FILLED; 2370 2371 return erp; 2372 } 2373 2374 /* 2375 * DASD_3990_ERP_ADDITIONAL_ERP 2376 * 2377 * DESCRIPTION 2378 * An additional ERP is needed to handle the current error. 2379 * Add ERP to the head of the ERP-chain containing the ERP processing 2380 * determined based on the sense data. 2381 * 2382 * PARAMETER 2383 * cqr head of the current ERP-chain (or single cqr if 2384 * first error) 2385 * 2386 * RETURN VALUES 2387 * erp pointer to new ERP-chain head 2388 */ 2389 static struct dasd_ccw_req * 2390 dasd_3990_erp_additional_erp(struct dasd_ccw_req * cqr) 2391 { 2392 2393 struct dasd_ccw_req *erp = NULL; 2394 2395 /* add erp and initialize with default TIC */ 2396 erp = dasd_3990_erp_add_erp(cqr); 2397 2398 if (IS_ERR(erp)) 2399 return erp; 2400 2401 /* inspect sense, determine specific ERP if possible */ 2402 if (erp != cqr) { 2403 2404 erp = dasd_3990_erp_inspect(erp); 2405 } 2406 2407 return erp; 2408 2409 } /* end dasd_3990_erp_additional_erp */ 2410 2411 /* 2412 * DASD_3990_ERP_ERROR_MATCH 2413 * 2414 * DESCRIPTION 2415 * Check if the device status of the given cqr is the same. 2416 * This means that the failed CCW and the relevant sense data 2417 * must match. 2418 * I don't distinguish between 24 and 32 byte sense because in case of 2419 * 24 byte sense byte 25 and 27 is set as well. 2420 * 2421 * PARAMETER 2422 * cqr1 first cqr, which will be compared with the 2423 * cqr2 second cqr. 2424 * 2425 * RETURN VALUES 2426 * match 'boolean' for match found 2427 * returns 1 if match found, otherwise 0. 2428 */ 2429 static int dasd_3990_erp_error_match(struct dasd_ccw_req *cqr1, 2430 struct dasd_ccw_req *cqr2) 2431 { 2432 char *sense1, *sense2; 2433 2434 if (cqr1->startdev != cqr2->startdev) 2435 return 0; 2436 2437 sense1 = dasd_get_sense(&cqr1->irb); 2438 sense2 = dasd_get_sense(&cqr2->irb); 2439 2440 /* one request has sense data, the other not -> no match, return 0 */ 2441 if (!sense1 != !sense2) 2442 return 0; 2443 /* no sense data in both cases -> check cstat for IFCC */ 2444 if (!sense1 && !sense2) { 2445 if ((scsw_cstat(&cqr1->irb.scsw) & (SCHN_STAT_INTF_CTRL_CHK | 2446 SCHN_STAT_CHN_CTRL_CHK)) == 2447 (scsw_cstat(&cqr2->irb.scsw) & (SCHN_STAT_INTF_CTRL_CHK | 2448 SCHN_STAT_CHN_CTRL_CHK))) 2449 return 1; /* match with ifcc*/ 2450 } 2451 /* check sense data; byte 0-2,25,27 */ 2452 if (!(sense1 && sense2 && 2453 (memcmp(sense1, sense2, 3) == 0) && 2454 (sense1[27] == sense2[27]) && 2455 (sense1[25] == sense2[25]))) { 2456 2457 return 0; /* sense doesn't match */ 2458 } 2459 2460 return 1; /* match */ 2461 2462 } /* end dasd_3990_erp_error_match */ 2463 2464 /* 2465 * DASD_3990_ERP_IN_ERP 2466 * 2467 * DESCRIPTION 2468 * check if the current error already happened before. 2469 * quick exit if current cqr is not an ERP (cqr->refers=NULL) 2470 * 2471 * PARAMETER 2472 * cqr failed cqr (either original cqr or already an erp) 2473 * 2474 * RETURN VALUES 2475 * erp erp-pointer to the already defined error 2476 * recovery procedure OR 2477 * NULL if a 'new' error occurred. 2478 */ 2479 static struct dasd_ccw_req * 2480 dasd_3990_erp_in_erp(struct dasd_ccw_req *cqr) 2481 { 2482 2483 struct dasd_ccw_req *erp_head = cqr, /* save erp chain head */ 2484 *erp_match = NULL; /* save erp chain head */ 2485 int match = 0; /* 'boolean' for matching error found */ 2486 2487 if (cqr->refers == NULL) { /* return if not in erp */ 2488 return NULL; 2489 } 2490 2491 /* check the erp/cqr chain for current error */ 2492 do { 2493 match = dasd_3990_erp_error_match(erp_head, cqr->refers); 2494 erp_match = cqr; /* save possible matching erp */ 2495 cqr = cqr->refers; /* check next erp/cqr in queue */ 2496 2497 } while ((cqr->refers != NULL) && (!match)); 2498 2499 if (!match) { 2500 return NULL; /* no match was found */ 2501 } 2502 2503 return erp_match; /* return address of matching erp */ 2504 2505 } /* END dasd_3990_erp_in_erp */ 2506 2507 /* 2508 * DASD_3990_ERP_FURTHER_ERP (24 & 32 byte sense) 2509 * 2510 * DESCRIPTION 2511 * No retry is left for the current ERP. Check what has to be done 2512 * with the ERP. 2513 * - do further defined ERP action or 2514 * - wait for interrupt or 2515 * - exit with permanent error 2516 * 2517 * PARAMETER 2518 * erp ERP which is in progress with no retry left 2519 * 2520 * RETURN VALUES 2521 * erp modified/additional ERP 2522 */ 2523 static struct dasd_ccw_req * 2524 dasd_3990_erp_further_erp(struct dasd_ccw_req *erp) 2525 { 2526 2527 struct dasd_device *device = erp->startdev; 2528 char *sense = dasd_get_sense(&erp->irb); 2529 2530 /* check for 24 byte sense ERP */ 2531 if ((erp->function == dasd_3990_erp_bus_out) || 2532 (erp->function == dasd_3990_erp_action_1) || 2533 (erp->function == dasd_3990_erp_action_4)) { 2534 2535 erp = dasd_3990_erp_action_1(erp); 2536 2537 } else if (erp->function == dasd_3990_erp_action_1_sec) { 2538 erp = dasd_3990_erp_action_1_sec(erp); 2539 } else if (erp->function == dasd_3990_erp_action_5) { 2540 2541 /* retries have not been successful */ 2542 /* prepare erp for retry on different channel path */ 2543 erp = dasd_3990_erp_action_1(erp); 2544 2545 if (sense && !(sense[2] & DASD_SENSE_BIT_0)) { 2546 2547 /* issue a Diagnostic Control command with an 2548 * Inhibit Write subcommand */ 2549 2550 switch (sense[25]) { 2551 case 0x17: 2552 case 0x57:{ /* controller */ 2553 erp = dasd_3990_erp_DCTL(erp, 0x20); 2554 break; 2555 } 2556 case 0x18: 2557 case 0x58:{ /* channel path */ 2558 erp = dasd_3990_erp_DCTL(erp, 0x40); 2559 break; 2560 } 2561 case 0x19: 2562 case 0x59:{ /* storage director */ 2563 erp = dasd_3990_erp_DCTL(erp, 0x80); 2564 break; 2565 } 2566 default: 2567 DBF_DEV_EVENT(DBF_WARNING, device, 2568 "invalid subcommand modifier 0x%x " 2569 "for Diagnostic Control Command", 2570 sense[25]); 2571 } 2572 } 2573 2574 /* check for 32 byte sense ERP */ 2575 } else if (sense && 2576 ((erp->function == dasd_3990_erp_compound_retry) || 2577 (erp->function == dasd_3990_erp_compound_path) || 2578 (erp->function == dasd_3990_erp_compound_code) || 2579 (erp->function == dasd_3990_erp_compound_config))) { 2580 2581 erp = dasd_3990_erp_compound(erp, sense); 2582 2583 } else { 2584 /* 2585 * No retry left and no additional special handling 2586 * necessary 2587 */ 2588 dev_err(&device->cdev->dev, 2589 "ERP %p has run out of retries and failed\n", erp); 2590 2591 erp->status = DASD_CQR_FAILED; 2592 } 2593 2594 return erp; 2595 2596 } /* end dasd_3990_erp_further_erp */ 2597 2598 /* 2599 * DASD_3990_ERP_HANDLE_MATCH_ERP 2600 * 2601 * DESCRIPTION 2602 * An error occurred again and an ERP has been detected which is already 2603 * used to handle this error (e.g. retries). 2604 * All prior ERP's are asumed to be successful and therefore removed 2605 * from queue. 2606 * If retry counter of matching erp is already 0, it is checked if further 2607 * action is needed (besides retry) or if the ERP has failed. 2608 * 2609 * PARAMETER 2610 * erp_head first ERP in ERP-chain 2611 * erp ERP that handles the actual error. 2612 * (matching erp) 2613 * 2614 * RETURN VALUES 2615 * erp modified/additional ERP 2616 */ 2617 static struct dasd_ccw_req * 2618 dasd_3990_erp_handle_match_erp(struct dasd_ccw_req *erp_head, 2619 struct dasd_ccw_req *erp) 2620 { 2621 2622 struct dasd_device *device = erp_head->startdev; 2623 struct dasd_ccw_req *erp_done = erp_head; /* finished req */ 2624 struct dasd_ccw_req *erp_free = NULL; /* req to be freed */ 2625 2626 /* loop over successful ERPs and remove them from chanq */ 2627 while (erp_done != erp) { 2628 2629 if (erp_done == NULL) /* end of chain reached */ 2630 panic(PRINTK_HEADER "Programming error in ERP! The " 2631 "original request was lost\n"); 2632 2633 /* remove the request from the device queue */ 2634 list_del(&erp_done->blocklist); 2635 2636 erp_free = erp_done; 2637 erp_done = erp_done->refers; 2638 2639 /* free the finished erp request */ 2640 dasd_free_erp_request(erp_free, erp_free->memdev); 2641 2642 } /* end while */ 2643 2644 if (erp->retries > 0) { 2645 2646 char *sense = dasd_get_sense(&erp->refers->irb); 2647 2648 /* check for special retries */ 2649 if (sense && erp->function == dasd_3990_erp_action_4) { 2650 2651 erp = dasd_3990_erp_action_4(erp, sense); 2652 2653 } else if (sense && 2654 erp->function == dasd_3990_erp_action_1B_32) { 2655 2656 erp = dasd_3990_update_1B(erp, sense); 2657 2658 } else if (sense && erp->function == dasd_3990_erp_int_req) { 2659 2660 erp = dasd_3990_erp_int_req(erp); 2661 2662 } else { 2663 /* simple retry */ 2664 DBF_DEV_EVENT(DBF_DEBUG, device, 2665 "%i retries left for erp %p", 2666 erp->retries, erp); 2667 2668 /* handle the request again... */ 2669 erp->status = DASD_CQR_FILLED; 2670 } 2671 2672 } else { 2673 /* no retry left - check for further necessary action */ 2674 /* if no further actions, handle rest as permanent error */ 2675 erp = dasd_3990_erp_further_erp(erp); 2676 } 2677 2678 return erp; 2679 2680 } /* end dasd_3990_erp_handle_match_erp */ 2681 2682 /* 2683 * DASD_3990_ERP_ACTION 2684 * 2685 * DESCRIPTION 2686 * control routine for 3990 erp actions. 2687 * Has to be called with the queue lock (namely the s390_irq_lock) acquired. 2688 * 2689 * PARAMETER 2690 * cqr failed cqr (either original cqr or already an erp) 2691 * 2692 * RETURN VALUES 2693 * erp erp-pointer to the head of the ERP action chain. 2694 * This means: 2695 * - either a ptr to an additional ERP cqr or 2696 * - the original given cqr (which's status might 2697 * be modified) 2698 */ 2699 struct dasd_ccw_req * 2700 dasd_3990_erp_action(struct dasd_ccw_req * cqr) 2701 { 2702 struct dasd_ccw_req *erp = NULL; 2703 struct dasd_device *device = cqr->startdev; 2704 struct dasd_ccw_req *temp_erp = NULL; 2705 2706 if (device->features & DASD_FEATURE_ERPLOG) { 2707 /* print current erp_chain */ 2708 dev_err(&device->cdev->dev, 2709 "ERP chain at BEGINNING of ERP-ACTION\n"); 2710 for (temp_erp = cqr; 2711 temp_erp != NULL; temp_erp = temp_erp->refers) { 2712 2713 dev_err(&device->cdev->dev, 2714 "ERP %p (%02x) refers to %p\n", 2715 temp_erp, temp_erp->status, 2716 temp_erp->refers); 2717 } 2718 } 2719 2720 /* double-check if current erp/cqr was successful */ 2721 if ((scsw_cstat(&cqr->irb.scsw) == 0x00) && 2722 (scsw_dstat(&cqr->irb.scsw) == 2723 (DEV_STAT_CHN_END | DEV_STAT_DEV_END))) { 2724 2725 DBF_DEV_EVENT(DBF_DEBUG, device, 2726 "ERP called for successful request %p" 2727 " - NO ERP necessary", cqr); 2728 2729 cqr->status = DASD_CQR_DONE; 2730 2731 return cqr; 2732 } 2733 2734 /* check if error happened before */ 2735 erp = dasd_3990_erp_in_erp(cqr); 2736 2737 if (erp == NULL) { 2738 /* no matching erp found - set up erp */ 2739 erp = dasd_3990_erp_additional_erp(cqr); 2740 if (IS_ERR(erp)) 2741 return erp; 2742 } else { 2743 /* matching erp found - set all leading erp's to DONE */ 2744 erp = dasd_3990_erp_handle_match_erp(cqr, erp); 2745 } 2746 2747 if (device->features & DASD_FEATURE_ERPLOG) { 2748 /* print current erp_chain */ 2749 dev_err(&device->cdev->dev, 2750 "ERP chain at END of ERP-ACTION\n"); 2751 for (temp_erp = erp; 2752 temp_erp != NULL; temp_erp = temp_erp->refers) { 2753 2754 dev_err(&device->cdev->dev, 2755 "ERP %p (%02x) refers to %p\n", 2756 temp_erp, temp_erp->status, 2757 temp_erp->refers); 2758 } 2759 } 2760 2761 /* enqueue ERP request if it's a new one */ 2762 if (list_empty(&erp->blocklist)) { 2763 cqr->status = DASD_CQR_IN_ERP; 2764 /* add erp request before the cqr */ 2765 list_add_tail(&erp->blocklist, &cqr->blocklist); 2766 } 2767 2768 2769 2770 return erp; 2771 2772 } /* end dasd_3990_erp_action */ 2773