xref: /openbmc/linux/drivers/rtc/rtc-twl.c (revision 8c0b9ee8)
1 /*
2  * rtc-twl.c -- TWL Real Time Clock interface
3  *
4  * Copyright (C) 2007 MontaVista Software, Inc
5  * Author: Alexandre Rusev <source@mvista.com>
6  *
7  * Based on original TI driver twl4030-rtc.c
8  *   Copyright (C) 2006 Texas Instruments, Inc.
9  *
10  * Based on rtc-omap.c
11  *   Copyright (C) 2003 MontaVista Software, Inc.
12  *   Author: George G. Davis <gdavis@mvista.com> or <source@mvista.com>
13  *   Copyright (C) 2006 David Brownell
14  *
15  * This program is free software; you can redistribute it and/or
16  * modify it under the terms of the GNU General Public License
17  * as published by the Free Software Foundation; either version
18  * 2 of the License, or (at your option) any later version.
19  */
20 
21 #include <linux/kernel.h>
22 #include <linux/errno.h>
23 #include <linux/init.h>
24 #include <linux/module.h>
25 #include <linux/types.h>
26 #include <linux/rtc.h>
27 #include <linux/bcd.h>
28 #include <linux/platform_device.h>
29 #include <linux/interrupt.h>
30 #include <linux/of.h>
31 
32 #include <linux/i2c/twl.h>
33 
34 
35 /*
36  * RTC block register offsets (use TWL_MODULE_RTC)
37  */
38 enum {
39 	REG_SECONDS_REG = 0,
40 	REG_MINUTES_REG,
41 	REG_HOURS_REG,
42 	REG_DAYS_REG,
43 	REG_MONTHS_REG,
44 	REG_YEARS_REG,
45 	REG_WEEKS_REG,
46 
47 	REG_ALARM_SECONDS_REG,
48 	REG_ALARM_MINUTES_REG,
49 	REG_ALARM_HOURS_REG,
50 	REG_ALARM_DAYS_REG,
51 	REG_ALARM_MONTHS_REG,
52 	REG_ALARM_YEARS_REG,
53 
54 	REG_RTC_CTRL_REG,
55 	REG_RTC_STATUS_REG,
56 	REG_RTC_INTERRUPTS_REG,
57 
58 	REG_RTC_COMP_LSB_REG,
59 	REG_RTC_COMP_MSB_REG,
60 };
61 static const u8 twl4030_rtc_reg_map[] = {
62 	[REG_SECONDS_REG] = 0x00,
63 	[REG_MINUTES_REG] = 0x01,
64 	[REG_HOURS_REG] = 0x02,
65 	[REG_DAYS_REG] = 0x03,
66 	[REG_MONTHS_REG] = 0x04,
67 	[REG_YEARS_REG] = 0x05,
68 	[REG_WEEKS_REG] = 0x06,
69 
70 	[REG_ALARM_SECONDS_REG] = 0x07,
71 	[REG_ALARM_MINUTES_REG] = 0x08,
72 	[REG_ALARM_HOURS_REG] = 0x09,
73 	[REG_ALARM_DAYS_REG] = 0x0A,
74 	[REG_ALARM_MONTHS_REG] = 0x0B,
75 	[REG_ALARM_YEARS_REG] = 0x0C,
76 
77 	[REG_RTC_CTRL_REG] = 0x0D,
78 	[REG_RTC_STATUS_REG] = 0x0E,
79 	[REG_RTC_INTERRUPTS_REG] = 0x0F,
80 
81 	[REG_RTC_COMP_LSB_REG] = 0x10,
82 	[REG_RTC_COMP_MSB_REG] = 0x11,
83 };
84 static const u8 twl6030_rtc_reg_map[] = {
85 	[REG_SECONDS_REG] = 0x00,
86 	[REG_MINUTES_REG] = 0x01,
87 	[REG_HOURS_REG] = 0x02,
88 	[REG_DAYS_REG] = 0x03,
89 	[REG_MONTHS_REG] = 0x04,
90 	[REG_YEARS_REG] = 0x05,
91 	[REG_WEEKS_REG] = 0x06,
92 
93 	[REG_ALARM_SECONDS_REG] = 0x08,
94 	[REG_ALARM_MINUTES_REG] = 0x09,
95 	[REG_ALARM_HOURS_REG] = 0x0A,
96 	[REG_ALARM_DAYS_REG] = 0x0B,
97 	[REG_ALARM_MONTHS_REG] = 0x0C,
98 	[REG_ALARM_YEARS_REG] = 0x0D,
99 
100 	[REG_RTC_CTRL_REG] = 0x10,
101 	[REG_RTC_STATUS_REG] = 0x11,
102 	[REG_RTC_INTERRUPTS_REG] = 0x12,
103 
104 	[REG_RTC_COMP_LSB_REG] = 0x13,
105 	[REG_RTC_COMP_MSB_REG] = 0x14,
106 };
107 
108 /* RTC_CTRL_REG bitfields */
109 #define BIT_RTC_CTRL_REG_STOP_RTC_M              0x01
110 #define BIT_RTC_CTRL_REG_ROUND_30S_M             0x02
111 #define BIT_RTC_CTRL_REG_AUTO_COMP_M             0x04
112 #define BIT_RTC_CTRL_REG_MODE_12_24_M            0x08
113 #define BIT_RTC_CTRL_REG_TEST_MODE_M             0x10
114 #define BIT_RTC_CTRL_REG_SET_32_COUNTER_M        0x20
115 #define BIT_RTC_CTRL_REG_GET_TIME_M              0x40
116 #define BIT_RTC_CTRL_REG_RTC_V_OPT               0x80
117 
118 /* RTC_STATUS_REG bitfields */
119 #define BIT_RTC_STATUS_REG_RUN_M                 0x02
120 #define BIT_RTC_STATUS_REG_1S_EVENT_M            0x04
121 #define BIT_RTC_STATUS_REG_1M_EVENT_M            0x08
122 #define BIT_RTC_STATUS_REG_1H_EVENT_M            0x10
123 #define BIT_RTC_STATUS_REG_1D_EVENT_M            0x20
124 #define BIT_RTC_STATUS_REG_ALARM_M               0x40
125 #define BIT_RTC_STATUS_REG_POWER_UP_M            0x80
126 
127 /* RTC_INTERRUPTS_REG bitfields */
128 #define BIT_RTC_INTERRUPTS_REG_EVERY_M           0x03
129 #define BIT_RTC_INTERRUPTS_REG_IT_TIMER_M        0x04
130 #define BIT_RTC_INTERRUPTS_REG_IT_ALARM_M        0x08
131 
132 
133 /* REG_SECONDS_REG through REG_YEARS_REG is how many registers? */
134 #define ALL_TIME_REGS		6
135 
136 /*----------------------------------------------------------------------*/
137 static u8  *rtc_reg_map;
138 
139 /*
140  * Supports 1 byte read from TWL RTC register.
141  */
142 static int twl_rtc_read_u8(u8 *data, u8 reg)
143 {
144 	int ret;
145 
146 	ret = twl_i2c_read_u8(TWL_MODULE_RTC, data, (rtc_reg_map[reg]));
147 	if (ret < 0)
148 		pr_err("twl_rtc: Could not read TWL"
149 		       "register %X - error %d\n", reg, ret);
150 	return ret;
151 }
152 
153 /*
154  * Supports 1 byte write to TWL RTC registers.
155  */
156 static int twl_rtc_write_u8(u8 data, u8 reg)
157 {
158 	int ret;
159 
160 	ret = twl_i2c_write_u8(TWL_MODULE_RTC, data, (rtc_reg_map[reg]));
161 	if (ret < 0)
162 		pr_err("twl_rtc: Could not write TWL"
163 		       "register %X - error %d\n", reg, ret);
164 	return ret;
165 }
166 
167 /*
168  * Cache the value for timer/alarm interrupts register; this is
169  * only changed by callers holding rtc ops lock (or resume).
170  */
171 static unsigned char rtc_irq_bits;
172 
173 /*
174  * Enable 1/second update and/or alarm interrupts.
175  */
176 static int set_rtc_irq_bit(unsigned char bit)
177 {
178 	unsigned char val;
179 	int ret;
180 
181 	/* if the bit is set, return from here */
182 	if (rtc_irq_bits & bit)
183 		return 0;
184 
185 	val = rtc_irq_bits | bit;
186 	val &= ~BIT_RTC_INTERRUPTS_REG_EVERY_M;
187 	ret = twl_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG);
188 	if (ret == 0)
189 		rtc_irq_bits = val;
190 
191 	return ret;
192 }
193 
194 /*
195  * Disable update and/or alarm interrupts.
196  */
197 static int mask_rtc_irq_bit(unsigned char bit)
198 {
199 	unsigned char val;
200 	int ret;
201 
202 	/* if the bit is clear, return from here */
203 	if (!(rtc_irq_bits & bit))
204 		return 0;
205 
206 	val = rtc_irq_bits & ~bit;
207 	ret = twl_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG);
208 	if (ret == 0)
209 		rtc_irq_bits = val;
210 
211 	return ret;
212 }
213 
214 static int twl_rtc_alarm_irq_enable(struct device *dev, unsigned enabled)
215 {
216 	struct platform_device *pdev = to_platform_device(dev);
217 	int irq = platform_get_irq(pdev, 0);
218 	static bool twl_rtc_wake_enabled;
219 	int ret;
220 
221 	if (enabled) {
222 		ret = set_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
223 		if (device_can_wakeup(dev) && !twl_rtc_wake_enabled) {
224 			enable_irq_wake(irq);
225 			twl_rtc_wake_enabled = true;
226 		}
227 	} else {
228 		ret = mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
229 		if (twl_rtc_wake_enabled) {
230 			disable_irq_wake(irq);
231 			twl_rtc_wake_enabled = false;
232 		}
233 	}
234 
235 	return ret;
236 }
237 
238 /*
239  * Gets current TWL RTC time and date parameters.
240  *
241  * The RTC's time/alarm representation is not what gmtime(3) requires
242  * Linux to use:
243  *
244  *  - Months are 1..12 vs Linux 0-11
245  *  - Years are 0..99 vs Linux 1900..N (we assume 21st century)
246  */
247 static int twl_rtc_read_time(struct device *dev, struct rtc_time *tm)
248 {
249 	unsigned char rtc_data[ALL_TIME_REGS];
250 	int ret;
251 	u8 save_control;
252 	u8 rtc_control;
253 
254 	ret = twl_rtc_read_u8(&save_control, REG_RTC_CTRL_REG);
255 	if (ret < 0) {
256 		dev_err(dev, "%s: reading CTRL_REG, error %d\n", __func__, ret);
257 		return ret;
258 	}
259 	/* for twl6030/32 make sure BIT_RTC_CTRL_REG_GET_TIME_M is clear */
260 	if (twl_class_is_6030()) {
261 		if (save_control & BIT_RTC_CTRL_REG_GET_TIME_M) {
262 			save_control &= ~BIT_RTC_CTRL_REG_GET_TIME_M;
263 			ret = twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
264 			if (ret < 0) {
265 				dev_err(dev, "%s clr GET_TIME, error %d\n",
266 					__func__, ret);
267 				return ret;
268 			}
269 		}
270 	}
271 
272 	/* Copy RTC counting registers to static registers or latches */
273 	rtc_control = save_control | BIT_RTC_CTRL_REG_GET_TIME_M;
274 
275 	/* for twl6030/32 enable read access to static shadowed registers */
276 	if (twl_class_is_6030())
277 		rtc_control |= BIT_RTC_CTRL_REG_RTC_V_OPT;
278 
279 	ret = twl_rtc_write_u8(rtc_control, REG_RTC_CTRL_REG);
280 	if (ret < 0) {
281 		dev_err(dev, "%s: writing CTRL_REG, error %d\n", __func__, ret);
282 		return ret;
283 	}
284 
285 	ret = twl_i2c_read(TWL_MODULE_RTC, rtc_data,
286 			(rtc_reg_map[REG_SECONDS_REG]), ALL_TIME_REGS);
287 
288 	if (ret < 0) {
289 		dev_err(dev, "%s: reading data, error %d\n", __func__, ret);
290 		return ret;
291 	}
292 
293 	/* for twl6030 restore original state of rtc control register */
294 	if (twl_class_is_6030()) {
295 		ret = twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
296 		if (ret < 0) {
297 			dev_err(dev, "%s: restore CTRL_REG, error %d\n",
298 				__func__, ret);
299 			return ret;
300 		}
301 	}
302 
303 	tm->tm_sec = bcd2bin(rtc_data[0]);
304 	tm->tm_min = bcd2bin(rtc_data[1]);
305 	tm->tm_hour = bcd2bin(rtc_data[2]);
306 	tm->tm_mday = bcd2bin(rtc_data[3]);
307 	tm->tm_mon = bcd2bin(rtc_data[4]) - 1;
308 	tm->tm_year = bcd2bin(rtc_data[5]) + 100;
309 
310 	return ret;
311 }
312 
313 static int twl_rtc_set_time(struct device *dev, struct rtc_time *tm)
314 {
315 	unsigned char save_control;
316 	unsigned char rtc_data[ALL_TIME_REGS];
317 	int ret;
318 
319 	rtc_data[0] = bin2bcd(tm->tm_sec);
320 	rtc_data[1] = bin2bcd(tm->tm_min);
321 	rtc_data[2] = bin2bcd(tm->tm_hour);
322 	rtc_data[3] = bin2bcd(tm->tm_mday);
323 	rtc_data[4] = bin2bcd(tm->tm_mon + 1);
324 	rtc_data[5] = bin2bcd(tm->tm_year - 100);
325 
326 	/* Stop RTC while updating the TC registers */
327 	ret = twl_rtc_read_u8(&save_control, REG_RTC_CTRL_REG);
328 	if (ret < 0)
329 		goto out;
330 
331 	save_control &= ~BIT_RTC_CTRL_REG_STOP_RTC_M;
332 	ret = twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
333 	if (ret < 0)
334 		goto out;
335 
336 	/* update all the time registers in one shot */
337 	ret = twl_i2c_write(TWL_MODULE_RTC, rtc_data,
338 		(rtc_reg_map[REG_SECONDS_REG]), ALL_TIME_REGS);
339 	if (ret < 0) {
340 		dev_err(dev, "rtc_set_time error %d\n", ret);
341 		goto out;
342 	}
343 
344 	/* Start back RTC */
345 	save_control |= BIT_RTC_CTRL_REG_STOP_RTC_M;
346 	ret = twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
347 
348 out:
349 	return ret;
350 }
351 
352 /*
353  * Gets current TWL RTC alarm time.
354  */
355 static int twl_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
356 {
357 	unsigned char rtc_data[ALL_TIME_REGS];
358 	int ret;
359 
360 	ret = twl_i2c_read(TWL_MODULE_RTC, rtc_data,
361 			(rtc_reg_map[REG_ALARM_SECONDS_REG]), ALL_TIME_REGS);
362 	if (ret < 0) {
363 		dev_err(dev, "rtc_read_alarm error %d\n", ret);
364 		return ret;
365 	}
366 
367 	/* some of these fields may be wildcard/"match all" */
368 	alm->time.tm_sec = bcd2bin(rtc_data[0]);
369 	alm->time.tm_min = bcd2bin(rtc_data[1]);
370 	alm->time.tm_hour = bcd2bin(rtc_data[2]);
371 	alm->time.tm_mday = bcd2bin(rtc_data[3]);
372 	alm->time.tm_mon = bcd2bin(rtc_data[4]) - 1;
373 	alm->time.tm_year = bcd2bin(rtc_data[5]) + 100;
374 
375 	/* report cached alarm enable state */
376 	if (rtc_irq_bits & BIT_RTC_INTERRUPTS_REG_IT_ALARM_M)
377 		alm->enabled = 1;
378 
379 	return ret;
380 }
381 
382 static int twl_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
383 {
384 	unsigned char alarm_data[ALL_TIME_REGS];
385 	int ret;
386 
387 	ret = twl_rtc_alarm_irq_enable(dev, 0);
388 	if (ret)
389 		goto out;
390 
391 	alarm_data[0] = bin2bcd(alm->time.tm_sec);
392 	alarm_data[1] = bin2bcd(alm->time.tm_min);
393 	alarm_data[2] = bin2bcd(alm->time.tm_hour);
394 	alarm_data[3] = bin2bcd(alm->time.tm_mday);
395 	alarm_data[4] = bin2bcd(alm->time.tm_mon + 1);
396 	alarm_data[5] = bin2bcd(alm->time.tm_year - 100);
397 
398 	/* update all the alarm registers in one shot */
399 	ret = twl_i2c_write(TWL_MODULE_RTC, alarm_data,
400 		(rtc_reg_map[REG_ALARM_SECONDS_REG]), ALL_TIME_REGS);
401 	if (ret) {
402 		dev_err(dev, "rtc_set_alarm error %d\n", ret);
403 		goto out;
404 	}
405 
406 	if (alm->enabled)
407 		ret = twl_rtc_alarm_irq_enable(dev, 1);
408 out:
409 	return ret;
410 }
411 
412 static irqreturn_t twl_rtc_interrupt(int irq, void *rtc)
413 {
414 	unsigned long events;
415 	int ret = IRQ_NONE;
416 	int res;
417 	u8 rd_reg;
418 
419 	res = twl_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG);
420 	if (res)
421 		goto out;
422 	/*
423 	 * Figure out source of interrupt: ALARM or TIMER in RTC_STATUS_REG.
424 	 * only one (ALARM or RTC) interrupt source may be enabled
425 	 * at time, we also could check our results
426 	 * by reading RTS_INTERRUPTS_REGISTER[IT_TIMER,IT_ALARM]
427 	 */
428 	if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M)
429 		events = RTC_IRQF | RTC_AF;
430 	else
431 		events = RTC_IRQF | RTC_PF;
432 
433 	res = twl_rtc_write_u8(BIT_RTC_STATUS_REG_ALARM_M,
434 				   REG_RTC_STATUS_REG);
435 	if (res)
436 		goto out;
437 
438 	if (twl_class_is_4030()) {
439 		/* Clear on Read enabled. RTC_IT bit of TWL4030_INT_PWR_ISR1
440 		 * needs 2 reads to clear the interrupt. One read is done in
441 		 * do_twl_pwrirq(). Doing the second read, to clear
442 		 * the bit.
443 		 *
444 		 * FIXME the reason PWR_ISR1 needs an extra read is that
445 		 * RTC_IF retriggered until we cleared REG_ALARM_M above.
446 		 * But re-reading like this is a bad hack; by doing so we
447 		 * risk wrongly clearing status for some other IRQ (losing
448 		 * the interrupt).  Be smarter about handling RTC_UF ...
449 		 */
450 		res = twl_i2c_read_u8(TWL4030_MODULE_INT,
451 			&rd_reg, TWL4030_INT_PWR_ISR1);
452 		if (res)
453 			goto out;
454 	}
455 
456 	/* Notify RTC core on event */
457 	rtc_update_irq(rtc, 1, events);
458 
459 	ret = IRQ_HANDLED;
460 out:
461 	return ret;
462 }
463 
464 static struct rtc_class_ops twl_rtc_ops = {
465 	.read_time	= twl_rtc_read_time,
466 	.set_time	= twl_rtc_set_time,
467 	.read_alarm	= twl_rtc_read_alarm,
468 	.set_alarm	= twl_rtc_set_alarm,
469 	.alarm_irq_enable = twl_rtc_alarm_irq_enable,
470 };
471 
472 /*----------------------------------------------------------------------*/
473 
474 static int twl_rtc_probe(struct platform_device *pdev)
475 {
476 	struct rtc_device *rtc;
477 	int ret = -EINVAL;
478 	int irq = platform_get_irq(pdev, 0);
479 	u8 rd_reg;
480 
481 	if (irq <= 0)
482 		return ret;
483 
484 	/* Initialize the register map */
485 	if (twl_class_is_4030())
486 		rtc_reg_map = (u8 *)twl4030_rtc_reg_map;
487 	else
488 		rtc_reg_map = (u8 *)twl6030_rtc_reg_map;
489 
490 	ret = twl_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG);
491 	if (ret < 0)
492 		return ret;
493 
494 	if (rd_reg & BIT_RTC_STATUS_REG_POWER_UP_M)
495 		dev_warn(&pdev->dev, "Power up reset detected.\n");
496 
497 	if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M)
498 		dev_warn(&pdev->dev, "Pending Alarm interrupt detected.\n");
499 
500 	/* Clear RTC Power up reset and pending alarm interrupts */
501 	ret = twl_rtc_write_u8(rd_reg, REG_RTC_STATUS_REG);
502 	if (ret < 0)
503 		return ret;
504 
505 	if (twl_class_is_6030()) {
506 		twl6030_interrupt_unmask(TWL6030_RTC_INT_MASK,
507 			REG_INT_MSK_LINE_A);
508 		twl6030_interrupt_unmask(TWL6030_RTC_INT_MASK,
509 			REG_INT_MSK_STS_A);
510 	}
511 
512 	dev_info(&pdev->dev, "Enabling TWL-RTC\n");
513 	ret = twl_rtc_write_u8(BIT_RTC_CTRL_REG_STOP_RTC_M, REG_RTC_CTRL_REG);
514 	if (ret < 0)
515 		return ret;
516 
517 	/* ensure interrupts are disabled, bootloaders can be strange */
518 	ret = twl_rtc_write_u8(0, REG_RTC_INTERRUPTS_REG);
519 	if (ret < 0)
520 		dev_warn(&pdev->dev, "unable to disable interrupt\n");
521 
522 	/* init cached IRQ enable bits */
523 	ret = twl_rtc_read_u8(&rtc_irq_bits, REG_RTC_INTERRUPTS_REG);
524 	if (ret < 0)
525 		return ret;
526 
527 	device_init_wakeup(&pdev->dev, 1);
528 
529 	rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
530 					&twl_rtc_ops, THIS_MODULE);
531 	if (IS_ERR(rtc)) {
532 		dev_err(&pdev->dev, "can't register RTC device, err %ld\n",
533 			PTR_ERR(rtc));
534 		return PTR_ERR(rtc);
535 	}
536 
537 	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
538 					twl_rtc_interrupt,
539 					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
540 					dev_name(&rtc->dev), rtc);
541 	if (ret < 0) {
542 		dev_err(&pdev->dev, "IRQ is not free.\n");
543 		return ret;
544 	}
545 
546 	platform_set_drvdata(pdev, rtc);
547 	return 0;
548 }
549 
550 /*
551  * Disable all TWL RTC module interrupts.
552  * Sets status flag to free.
553  */
554 static int twl_rtc_remove(struct platform_device *pdev)
555 {
556 	/* leave rtc running, but disable irqs */
557 	mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
558 	mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
559 	if (twl_class_is_6030()) {
560 		twl6030_interrupt_mask(TWL6030_RTC_INT_MASK,
561 			REG_INT_MSK_LINE_A);
562 		twl6030_interrupt_mask(TWL6030_RTC_INT_MASK,
563 			REG_INT_MSK_STS_A);
564 	}
565 
566 	return 0;
567 }
568 
569 static void twl_rtc_shutdown(struct platform_device *pdev)
570 {
571 	/* mask timer interrupts, but leave alarm interrupts on to enable
572 	   power-on when alarm is triggered */
573 	mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
574 }
575 
576 #ifdef CONFIG_PM_SLEEP
577 static unsigned char irqstat;
578 
579 static int twl_rtc_suspend(struct device *dev)
580 {
581 	irqstat = rtc_irq_bits;
582 
583 	mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
584 	return 0;
585 }
586 
587 static int twl_rtc_resume(struct device *dev)
588 {
589 	set_rtc_irq_bit(irqstat);
590 	return 0;
591 }
592 #endif
593 
594 static SIMPLE_DEV_PM_OPS(twl_rtc_pm_ops, twl_rtc_suspend, twl_rtc_resume);
595 
596 #ifdef CONFIG_OF
597 static const struct of_device_id twl_rtc_of_match[] = {
598 	{.compatible = "ti,twl4030-rtc", },
599 	{ },
600 };
601 MODULE_DEVICE_TABLE(of, twl_rtc_of_match);
602 #endif
603 
604 MODULE_ALIAS("platform:twl_rtc");
605 
606 static struct platform_driver twl4030rtc_driver = {
607 	.probe		= twl_rtc_probe,
608 	.remove		= twl_rtc_remove,
609 	.shutdown	= twl_rtc_shutdown,
610 	.driver		= {
611 		.name		= "twl_rtc",
612 		.pm		= &twl_rtc_pm_ops,
613 		.of_match_table = of_match_ptr(twl_rtc_of_match),
614 	},
615 };
616 
617 module_platform_driver(twl4030rtc_driver);
618 
619 MODULE_AUTHOR("Texas Instruments, MontaVista Software");
620 MODULE_LICENSE("GPL");
621