xref: /openbmc/linux/drivers/rtc/rtc-ti-k3.c (revision ac73d4bf)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Texas Instruments K3 RTC driver
4  *
5  * Copyright (C) 2021-2022 Texas Instruments Incorporated - https://www.ti.com/
6  */
7 
8 #include <linux/clk.h>
9 #include <linux/delay.h>
10 #include <linux/mod_devicetable.h>
11 #include <linux/module.h>
12 #include <linux/of_device.h>
13 #include <linux/platform_device.h>
14 #include <linux/sys_soc.h>
15 #include <linux/property.h>
16 #include <linux/regmap.h>
17 #include <linux/rtc.h>
18 
19 /* Registers */
20 #define REG_K3RTC_S_CNT_LSW		0x08
21 #define REG_K3RTC_S_CNT_MSW		0x0c
22 #define REG_K3RTC_COMP			0x10
23 #define REG_K3RTC_ON_OFF_S_CNT_LSW	0x20
24 #define REG_K3RTC_ON_OFF_S_CNT_MSW	0x24
25 #define REG_K3RTC_SCRATCH0		0x30
26 #define REG_K3RTC_SCRATCH7		0x4c
27 #define REG_K3RTC_GENERAL_CTL		0x50
28 #define REG_K3RTC_IRQSTATUS_RAW_SYS	0x54
29 #define REG_K3RTC_IRQSTATUS_SYS		0x58
30 #define REG_K3RTC_IRQENABLE_SET_SYS	0x5c
31 #define REG_K3RTC_IRQENABLE_CLR_SYS	0x60
32 #define REG_K3RTC_SYNCPEND		0x68
33 #define REG_K3RTC_KICK0			0x70
34 #define REG_K3RTC_KICK1			0x74
35 
36 /* Freeze when lsw is read and unfreeze when msw is read */
37 #define K3RTC_CNT_FMODE_S_CNT_VALUE	(0x2 << 24)
38 
39 /* Magic values for lock/unlock */
40 #define K3RTC_KICK0_UNLOCK_VALUE	0x83e70b13
41 #define K3RTC_KICK1_UNLOCK_VALUE	0x95a4f1e0
42 
43 /* Multiplier for ppb conversions */
44 #define K3RTC_PPB_MULT			(1000000000LL)
45 /* Min and max values supported with 'offset' interface (swapped sign) */
46 #define K3RTC_MIN_OFFSET		(-277761)
47 #define K3RTC_MAX_OFFSET		(277778)
48 
49 static const struct regmap_config ti_k3_rtc_regmap_config = {
50 	.name = "peripheral-registers",
51 	.reg_bits = 32,
52 	.val_bits = 32,
53 	.reg_stride = 4,
54 	.max_register = REG_K3RTC_KICK1,
55 };
56 
57 enum ti_k3_rtc_fields {
58 	K3RTC_KICK0,
59 	K3RTC_KICK1,
60 	K3RTC_S_CNT_LSW,
61 	K3RTC_S_CNT_MSW,
62 	K3RTC_O32K_OSC_DEP_EN,
63 	K3RTC_UNLOCK,
64 	K3RTC_CNT_FMODE,
65 	K3RTC_PEND,
66 	K3RTC_RELOAD_FROM_BBD,
67 	K3RTC_COMP,
68 
69 	K3RTC_ALM_S_CNT_LSW,
70 	K3RTC_ALM_S_CNT_MSW,
71 	K3RTC_IRQ_STATUS_RAW,
72 	K3RTC_IRQ_STATUS,
73 	K3RTC_IRQ_ENABLE_SET,
74 	K3RTC_IRQ_ENABLE_CLR,
75 
76 	K3RTC_IRQ_STATUS_ALT,
77 	K3RTC_IRQ_ENABLE_CLR_ALT,
78 
79 	K3_RTC_MAX_FIELDS
80 };
81 
82 static const struct reg_field ti_rtc_reg_fields[] = {
83 	[K3RTC_KICK0] = REG_FIELD(REG_K3RTC_KICK0, 0, 31),
84 	[K3RTC_KICK1] = REG_FIELD(REG_K3RTC_KICK1, 0, 31),
85 	[K3RTC_S_CNT_LSW] = REG_FIELD(REG_K3RTC_S_CNT_LSW, 0, 31),
86 	[K3RTC_S_CNT_MSW] = REG_FIELD(REG_K3RTC_S_CNT_MSW, 0, 15),
87 	[K3RTC_O32K_OSC_DEP_EN] = REG_FIELD(REG_K3RTC_GENERAL_CTL, 21, 21),
88 	[K3RTC_UNLOCK] = REG_FIELD(REG_K3RTC_GENERAL_CTL, 23, 23),
89 	[K3RTC_CNT_FMODE] = REG_FIELD(REG_K3RTC_GENERAL_CTL, 24, 25),
90 	[K3RTC_PEND] = REG_FIELD(REG_K3RTC_SYNCPEND, 0, 1),
91 	[K3RTC_RELOAD_FROM_BBD] = REG_FIELD(REG_K3RTC_SYNCPEND, 31, 31),
92 	[K3RTC_COMP] = REG_FIELD(REG_K3RTC_COMP, 0, 31),
93 
94 	/* We use on to off as alarm trigger */
95 	[K3RTC_ALM_S_CNT_LSW] = REG_FIELD(REG_K3RTC_ON_OFF_S_CNT_LSW, 0, 31),
96 	[K3RTC_ALM_S_CNT_MSW] = REG_FIELD(REG_K3RTC_ON_OFF_S_CNT_MSW, 0, 15),
97 	[K3RTC_IRQ_STATUS_RAW] = REG_FIELD(REG_K3RTC_IRQSTATUS_RAW_SYS, 0, 0),
98 	[K3RTC_IRQ_STATUS] = REG_FIELD(REG_K3RTC_IRQSTATUS_SYS, 0, 0),
99 	[K3RTC_IRQ_ENABLE_SET] = REG_FIELD(REG_K3RTC_IRQENABLE_SET_SYS, 0, 0),
100 	[K3RTC_IRQ_ENABLE_CLR] = REG_FIELD(REG_K3RTC_IRQENABLE_CLR_SYS, 0, 0),
101 	/* Off to on is alternate */
102 	[K3RTC_IRQ_STATUS_ALT] = REG_FIELD(REG_K3RTC_IRQSTATUS_SYS, 1, 1),
103 	[K3RTC_IRQ_ENABLE_CLR_ALT] = REG_FIELD(REG_K3RTC_IRQENABLE_CLR_SYS, 1, 1),
104 };
105 
106 /**
107  * struct ti_k3_rtc - Private data for ti-k3-rtc
108  * @irq:		IRQ
109  * @sync_timeout_us:	data sync timeout period in uSec
110  * @rate_32k:		32k clock rate in Hz
111  * @rtc_dev:		rtc device
112  * @regmap:		rtc mmio regmap
113  * @r_fields:		rtc register fields
114  */
115 struct ti_k3_rtc {
116 	unsigned int irq;
117 	u32 sync_timeout_us;
118 	unsigned long rate_32k;
119 	struct rtc_device *rtc_dev;
120 	struct regmap *regmap;
121 	struct regmap_field *r_fields[K3_RTC_MAX_FIELDS];
122 };
123 
124 static int k3rtc_field_read(struct ti_k3_rtc *priv, enum ti_k3_rtc_fields f)
125 {
126 	int ret;
127 	int val;
128 
129 	ret = regmap_field_read(priv->r_fields[f], &val);
130 	/*
131 	 * We shouldn't be seeing regmap fail on us for mmio reads
132 	 * This is possible if clock context fails, but that isn't the case for us
133 	 */
134 	if (WARN_ON_ONCE(ret))
135 		return ret;
136 	return val;
137 }
138 
139 static void k3rtc_field_write(struct ti_k3_rtc *priv, enum ti_k3_rtc_fields f, u32 val)
140 {
141 	regmap_field_write(priv->r_fields[f], val);
142 }
143 
144 /**
145  * k3rtc_fence  - Ensure a register sync took place between the two domains
146  * @priv:      pointer to priv data
147  *
148  * Return: 0 if the sync took place, else returns -ETIMEDOUT
149  */
150 static int k3rtc_fence(struct ti_k3_rtc *priv)
151 {
152 	int ret;
153 
154 	ret = regmap_field_read_poll_timeout(priv->r_fields[K3RTC_PEND], ret,
155 					     !ret, 2, priv->sync_timeout_us);
156 
157 	return ret;
158 }
159 
160 static inline int k3rtc_check_unlocked(struct ti_k3_rtc *priv)
161 {
162 	int ret;
163 
164 	ret = k3rtc_field_read(priv, K3RTC_UNLOCK);
165 	if (ret < 0)
166 		return ret;
167 
168 	return (ret) ? 0 : 1;
169 }
170 
171 static int k3rtc_unlock_rtc(struct ti_k3_rtc *priv)
172 {
173 	int ret;
174 
175 	ret = k3rtc_check_unlocked(priv);
176 	if (!ret)
177 		return ret;
178 
179 	k3rtc_field_write(priv, K3RTC_KICK0, K3RTC_KICK0_UNLOCK_VALUE);
180 	k3rtc_field_write(priv, K3RTC_KICK1, K3RTC_KICK1_UNLOCK_VALUE);
181 
182 	/* Skip fence since we are going to check the unlock bit as fence */
183 	ret = regmap_field_read_poll_timeout(priv->r_fields[K3RTC_UNLOCK], ret,
184 					     ret, 2, priv->sync_timeout_us);
185 
186 	return ret;
187 }
188 
189 /*
190  * This is the list of SoCs affected by TI's i2327 errata causing the RTC
191  * state-machine to break if not unlocked fast enough during boot. These
192  * SoCs must have the bootloader unlock this device very early in the
193  * boot-flow before we (Linux) can use this device.
194  */
195 static const struct soc_device_attribute has_erratum_i2327[] = {
196 	{ .family = "AM62X", .revision = "SR1.0" },
197 	{ /* sentinel */ }
198 };
199 
200 static int k3rtc_configure(struct device *dev)
201 {
202 	int ret;
203 	struct ti_k3_rtc *priv = dev_get_drvdata(dev);
204 
205 	/*
206 	 * HWBUG: The compare state machine is broken if the RTC module
207 	 * is NOT unlocked in under one second of boot - which is pretty long
208 	 * time from the perspective of Linux driver (module load, u-boot
209 	 * shell all can take much longer than this.
210 	 *
211 	 * In such occurrence, it is assumed that the RTC module is unusable
212 	 */
213 	if (soc_device_match(has_erratum_i2327)) {
214 		ret = k3rtc_check_unlocked(priv);
215 		/* If there is an error OR if we are locked, return error */
216 		if (ret) {
217 			dev_err(dev,
218 				HW_ERR "Erratum i2327 unlock QUIRK! Cannot operate!!\n");
219 			return -EFAULT;
220 		}
221 	} else {
222 		/* May need to explicitly unlock first time */
223 		ret = k3rtc_unlock_rtc(priv);
224 		if (ret) {
225 			dev_err(dev, "Failed to unlock(%d)!\n", ret);
226 			return ret;
227 		}
228 	}
229 
230 	/* Enable Shadow register sync on 32k clock boundary */
231 	k3rtc_field_write(priv, K3RTC_O32K_OSC_DEP_EN, 0x1);
232 
233 	/*
234 	 * Wait at least clock sync time before proceeding further programming.
235 	 * This ensures that the 32k based sync is active.
236 	 */
237 	usleep_range(priv->sync_timeout_us, priv->sync_timeout_us + 5);
238 
239 	/* We need to ensure fence here to make sure sync here */
240 	ret = k3rtc_fence(priv);
241 	if (ret) {
242 		dev_err(dev,
243 			"Failed fence osc_dep enable(%d) - is 32k clk working?!\n", ret);
244 		return ret;
245 	}
246 
247 	/*
248 	 * FMODE setting: Reading lower seconds will freeze value on higher
249 	 * seconds. This also implies that we must *ALWAYS* read lower seconds
250 	 * prior to reading higher seconds
251 	 */
252 	k3rtc_field_write(priv, K3RTC_CNT_FMODE, K3RTC_CNT_FMODE_S_CNT_VALUE);
253 
254 	/* Clear any spurious IRQ sources if any */
255 	k3rtc_field_write(priv, K3RTC_IRQ_STATUS_ALT, 0x1);
256 	k3rtc_field_write(priv, K3RTC_IRQ_STATUS, 0x1);
257 	/* Disable all IRQs */
258 	k3rtc_field_write(priv, K3RTC_IRQ_ENABLE_CLR_ALT, 0x1);
259 	k3rtc_field_write(priv, K3RTC_IRQ_ENABLE_CLR, 0x1);
260 
261 	/* And.. Let us Sync the writes in */
262 	return k3rtc_fence(priv);
263 }
264 
265 static int ti_k3_rtc_read_time(struct device *dev, struct rtc_time *tm)
266 {
267 	struct ti_k3_rtc *priv = dev_get_drvdata(dev);
268 	u32 seconds_lo, seconds_hi;
269 
270 	seconds_lo = k3rtc_field_read(priv, K3RTC_S_CNT_LSW);
271 	seconds_hi = k3rtc_field_read(priv, K3RTC_S_CNT_MSW);
272 
273 	rtc_time64_to_tm((((time64_t)seconds_hi) << 32) | (time64_t)seconds_lo, tm);
274 
275 	return 0;
276 }
277 
278 static int ti_k3_rtc_set_time(struct device *dev, struct rtc_time *tm)
279 {
280 	struct ti_k3_rtc *priv = dev_get_drvdata(dev);
281 	time64_t seconds;
282 
283 	seconds = rtc_tm_to_time64(tm);
284 
285 	/*
286 	 * Read operation on LSW will freeze the RTC, so to update
287 	 * the time, we cannot use field operations. Just write since the
288 	 * reserved bits are ignored.
289 	 */
290 	regmap_write(priv->regmap, REG_K3RTC_S_CNT_LSW, seconds);
291 	regmap_write(priv->regmap, REG_K3RTC_S_CNT_MSW, seconds >> 32);
292 
293 	return k3rtc_fence(priv);
294 }
295 
296 static int ti_k3_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
297 {
298 	struct ti_k3_rtc *priv = dev_get_drvdata(dev);
299 	u32 reg;
300 	u32 offset = enabled ? K3RTC_IRQ_ENABLE_SET : K3RTC_IRQ_ENABLE_CLR;
301 
302 	reg = k3rtc_field_read(priv, K3RTC_IRQ_ENABLE_SET);
303 	if ((enabled && reg) || (!enabled && !reg))
304 		return 0;
305 
306 	k3rtc_field_write(priv, offset, 0x1);
307 
308 	/*
309 	 * Ensure the write sync is through - NOTE: it should be OK to have
310 	 * ISR to fire as we are checking sync (which should be done in a 32k
311 	 * cycle or so).
312 	 */
313 	return k3rtc_fence(priv);
314 }
315 
316 static int ti_k3_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
317 {
318 	struct ti_k3_rtc *priv = dev_get_drvdata(dev);
319 	u32 seconds_lo, seconds_hi;
320 
321 	seconds_lo = k3rtc_field_read(priv, K3RTC_ALM_S_CNT_LSW);
322 	seconds_hi = k3rtc_field_read(priv, K3RTC_ALM_S_CNT_MSW);
323 
324 	rtc_time64_to_tm((((time64_t)seconds_hi) << 32) | (time64_t)seconds_lo, &alarm->time);
325 
326 	alarm->enabled = k3rtc_field_read(priv, K3RTC_IRQ_ENABLE_SET);
327 
328 	return 0;
329 }
330 
331 static int ti_k3_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
332 {
333 	struct ti_k3_rtc *priv = dev_get_drvdata(dev);
334 	time64_t seconds;
335 	int ret;
336 
337 	seconds = rtc_tm_to_time64(&alarm->time);
338 
339 	k3rtc_field_write(priv, K3RTC_ALM_S_CNT_LSW, seconds);
340 	k3rtc_field_write(priv, K3RTC_ALM_S_CNT_MSW, (seconds >> 32));
341 
342 	/* Make sure the alarm time is synced in */
343 	ret = k3rtc_fence(priv);
344 	if (ret) {
345 		dev_err(dev, "Failed to fence(%d)! Potential config issue?\n", ret);
346 		return ret;
347 	}
348 
349 	/* Alarm IRQ enable will do a sync */
350 	return ti_k3_rtc_alarm_irq_enable(dev, alarm->enabled);
351 }
352 
353 static int ti_k3_rtc_read_offset(struct device *dev, long *offset)
354 {
355 	struct ti_k3_rtc *priv = dev_get_drvdata(dev);
356 	u32 ticks_per_hr = priv->rate_32k * 3600;
357 	int comp;
358 	s64 tmp;
359 
360 	comp = k3rtc_field_read(priv, K3RTC_COMP);
361 
362 	/* Convert from RTC calibration register format to ppb format */
363 	tmp = comp * (s64)K3RTC_PPB_MULT;
364 	if (tmp < 0)
365 		tmp -= ticks_per_hr / 2LL;
366 	else
367 		tmp += ticks_per_hr / 2LL;
368 	tmp = div_s64(tmp, ticks_per_hr);
369 
370 	/* Offset value operates in negative way, so swap sign */
371 	*offset = (long)-tmp;
372 
373 	return 0;
374 }
375 
376 static int ti_k3_rtc_set_offset(struct device *dev, long offset)
377 {
378 	struct ti_k3_rtc *priv = dev_get_drvdata(dev);
379 	u32 ticks_per_hr = priv->rate_32k * 3600;
380 	int comp;
381 	s64 tmp;
382 
383 	/* Make sure offset value is within supported range */
384 	if (offset < K3RTC_MIN_OFFSET || offset > K3RTC_MAX_OFFSET)
385 		return -ERANGE;
386 
387 	/* Convert from ppb format to RTC calibration register format */
388 	tmp = offset * (s64)ticks_per_hr;
389 	if (tmp < 0)
390 		tmp -= K3RTC_PPB_MULT / 2LL;
391 	else
392 		tmp += K3RTC_PPB_MULT / 2LL;
393 	tmp = div_s64(tmp, K3RTC_PPB_MULT);
394 
395 	/* Offset value operates in negative way, so swap sign */
396 	comp = (int)-tmp;
397 
398 	k3rtc_field_write(priv, K3RTC_COMP, comp);
399 
400 	return k3rtc_fence(priv);
401 }
402 
403 static irqreturn_t ti_k3_rtc_interrupt(s32 irq, void *dev_id)
404 {
405 	struct device *dev = dev_id;
406 	struct ti_k3_rtc *priv = dev_get_drvdata(dev);
407 	u32 reg;
408 	int ret;
409 
410 	/*
411 	 * IRQ assertion can be very fast, however, the IRQ Status clear
412 	 * de-assert depends on 32k clock edge in the 32k domain
413 	 * If we clear the status prior to the first 32k clock edge,
414 	 * the status bit is cleared, but the IRQ stays re-asserted.
415 	 *
416 	 * To prevent this condition, we need to wait for clock sync time.
417 	 * We can either do that by polling the 32k observability signal for
418 	 * a toggle OR we could just sleep and let the processor do other
419 	 * stuff.
420 	 */
421 	usleep_range(priv->sync_timeout_us, priv->sync_timeout_us + 2);
422 
423 	/* Lets make sure that this is a valid interrupt */
424 	reg = k3rtc_field_read(priv, K3RTC_IRQ_STATUS);
425 
426 	if (!reg) {
427 		u32 raw = k3rtc_field_read(priv, K3RTC_IRQ_STATUS_RAW);
428 
429 		dev_err(dev,
430 			HW_ERR
431 			"Erratum i2327/IRQ trig: status: 0x%08x / 0x%08x\n", reg, raw);
432 		return IRQ_NONE;
433 	}
434 
435 	/*
436 	 * Write 1 to clear status reg
437 	 * We cannot use a field operation here due to a potential race between
438 	 * 32k domain and vbus domain.
439 	 */
440 	regmap_write(priv->regmap, REG_K3RTC_IRQSTATUS_SYS, 0x1);
441 
442 	/* Sync the write in */
443 	ret = k3rtc_fence(priv);
444 	if (ret) {
445 		dev_err(dev, "Failed to fence irq status clr(%d)!\n", ret);
446 		return IRQ_NONE;
447 	}
448 
449 	/*
450 	 * Force the 32k status to be reloaded back in to ensure status is
451 	 * reflected back correctly.
452 	 */
453 	k3rtc_field_write(priv, K3RTC_RELOAD_FROM_BBD, 0x1);
454 
455 	/* Ensure the write sync is through */
456 	ret = k3rtc_fence(priv);
457 	if (ret) {
458 		dev_err(dev, "Failed to fence reload from bbd(%d)!\n", ret);
459 		return IRQ_NONE;
460 	}
461 
462 	/* Now we ensure that the status bit is cleared */
463 	ret = regmap_field_read_poll_timeout(priv->r_fields[K3RTC_IRQ_STATUS],
464 					     ret, !ret, 2, priv->sync_timeout_us);
465 	if (ret) {
466 		dev_err(dev, "Time out waiting for status clear\n");
467 		return IRQ_NONE;
468 	}
469 
470 	/* Notify RTC core on event */
471 	rtc_update_irq(priv->rtc_dev, 1, RTC_IRQF | RTC_AF);
472 
473 	return IRQ_HANDLED;
474 }
475 
476 static const struct rtc_class_ops ti_k3_rtc_ops = {
477 	.read_time = ti_k3_rtc_read_time,
478 	.set_time = ti_k3_rtc_set_time,
479 	.read_alarm = ti_k3_rtc_read_alarm,
480 	.set_alarm = ti_k3_rtc_set_alarm,
481 	.read_offset = ti_k3_rtc_read_offset,
482 	.set_offset = ti_k3_rtc_set_offset,
483 	.alarm_irq_enable = ti_k3_rtc_alarm_irq_enable,
484 };
485 
486 static int ti_k3_rtc_scratch_read(void *priv_data, unsigned int offset,
487 				  void *val, size_t bytes)
488 {
489 	struct ti_k3_rtc *priv = (struct ti_k3_rtc *)priv_data;
490 
491 	return regmap_bulk_read(priv->regmap, REG_K3RTC_SCRATCH0 + offset, val, bytes / 4);
492 }
493 
494 static int ti_k3_rtc_scratch_write(void *priv_data, unsigned int offset,
495 				   void *val, size_t bytes)
496 {
497 	struct ti_k3_rtc *priv = (struct ti_k3_rtc *)priv_data;
498 	int ret;
499 
500 	ret = regmap_bulk_write(priv->regmap, REG_K3RTC_SCRATCH0 + offset, val, bytes / 4);
501 	if (ret)
502 		return ret;
503 
504 	return k3rtc_fence(priv);
505 }
506 
507 static struct nvmem_config ti_k3_rtc_nvmem_config = {
508 	.name = "ti_k3_rtc_scratch",
509 	.word_size = 4,
510 	.stride = 4,
511 	.size = REG_K3RTC_SCRATCH7 - REG_K3RTC_SCRATCH0 + 4,
512 	.reg_read = ti_k3_rtc_scratch_read,
513 	.reg_write = ti_k3_rtc_scratch_write,
514 };
515 
516 static int k3rtc_get_32kclk(struct device *dev, struct ti_k3_rtc *priv)
517 {
518 	struct clk *clk;
519 
520 	clk = devm_clk_get_enabled(dev, "osc32k");
521 	if (IS_ERR(clk))
522 		return PTR_ERR(clk);
523 
524 	priv->rate_32k = clk_get_rate(clk);
525 
526 	/* Make sure we are exact 32k clock. Else, try to compensate delay */
527 	if (priv->rate_32k != 32768)
528 		dev_warn(dev, "Clock rate %ld is not 32768! Could misbehave!\n",
529 			 priv->rate_32k);
530 
531 	/*
532 	 * Sync timeout should be two 32k clk sync cycles = ~61uS. We double
533 	 * it to comprehend intermediate bus segment and cpu frequency
534 	 * deltas
535 	 */
536 	priv->sync_timeout_us = (u32)(DIV_ROUND_UP_ULL(1000000, priv->rate_32k) * 4);
537 
538 	return 0;
539 }
540 
541 static int k3rtc_get_vbusclk(struct device *dev, struct ti_k3_rtc *priv)
542 {
543 	struct clk *clk;
544 
545 	/* Note: VBUS isn't a context clock, it is needed for hardware operation */
546 	clk = devm_clk_get_enabled(dev, "vbus");
547 	if (IS_ERR(clk))
548 		return PTR_ERR(clk);
549 
550 	return 0;
551 }
552 
553 static int ti_k3_rtc_probe(struct platform_device *pdev)
554 {
555 	struct device *dev = &pdev->dev;
556 	struct ti_k3_rtc *priv;
557 	void __iomem *rtc_base;
558 	int ret;
559 
560 	priv = devm_kzalloc(dev, sizeof(struct ti_k3_rtc), GFP_KERNEL);
561 	if (!priv)
562 		return -ENOMEM;
563 
564 	rtc_base = devm_platform_ioremap_resource(pdev, 0);
565 	if (IS_ERR(rtc_base))
566 		return PTR_ERR(rtc_base);
567 
568 	priv->regmap = devm_regmap_init_mmio(dev, rtc_base, &ti_k3_rtc_regmap_config);
569 	if (IS_ERR(priv->regmap))
570 		return PTR_ERR(priv->regmap);
571 
572 	ret = devm_regmap_field_bulk_alloc(dev, priv->regmap, priv->r_fields,
573 					   ti_rtc_reg_fields, K3_RTC_MAX_FIELDS);
574 	if (ret)
575 		return ret;
576 
577 	ret = k3rtc_get_32kclk(dev, priv);
578 	if (ret)
579 		return ret;
580 	ret = k3rtc_get_vbusclk(dev, priv);
581 	if (ret)
582 		return ret;
583 
584 	ret = platform_get_irq(pdev, 0);
585 	if (ret < 0)
586 		return ret;
587 	priv->irq = (unsigned int)ret;
588 
589 	priv->rtc_dev = devm_rtc_allocate_device(dev);
590 	if (IS_ERR(priv->rtc_dev))
591 		return PTR_ERR(priv->rtc_dev);
592 
593 	priv->rtc_dev->ops = &ti_k3_rtc_ops;
594 	priv->rtc_dev->range_max = (1ULL << 48) - 1;	/* 48Bit seconds */
595 	ti_k3_rtc_nvmem_config.priv = priv;
596 
597 	ret = devm_request_threaded_irq(dev, priv->irq, NULL,
598 					ti_k3_rtc_interrupt,
599 					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
600 					dev_name(dev), dev);
601 	if (ret) {
602 		dev_err(dev, "Could not request IRQ: %d\n", ret);
603 		return ret;
604 	}
605 
606 	platform_set_drvdata(pdev, priv);
607 
608 	ret = k3rtc_configure(dev);
609 	if (ret)
610 		return ret;
611 
612 	if (device_property_present(dev, "wakeup-source"))
613 		device_init_wakeup(dev, true);
614 	else
615 		device_set_wakeup_capable(dev, true);
616 
617 	ret = devm_rtc_register_device(priv->rtc_dev);
618 	if (ret)
619 		return ret;
620 
621 	return devm_rtc_nvmem_register(priv->rtc_dev, &ti_k3_rtc_nvmem_config);
622 }
623 
624 static const struct of_device_id ti_k3_rtc_of_match_table[] = {
625 	{.compatible = "ti,am62-rtc" },
626 	{}
627 };
628 MODULE_DEVICE_TABLE(of, ti_k3_rtc_of_match_table);
629 
630 static int __maybe_unused ti_k3_rtc_suspend(struct device *dev)
631 {
632 	struct ti_k3_rtc *priv = dev_get_drvdata(dev);
633 
634 	if (device_may_wakeup(dev))
635 		enable_irq_wake(priv->irq);
636 	return 0;
637 }
638 
639 static int __maybe_unused ti_k3_rtc_resume(struct device *dev)
640 {
641 	struct ti_k3_rtc *priv = dev_get_drvdata(dev);
642 
643 	if (device_may_wakeup(dev))
644 		disable_irq_wake(priv->irq);
645 	return 0;
646 }
647 
648 static SIMPLE_DEV_PM_OPS(ti_k3_rtc_pm_ops, ti_k3_rtc_suspend, ti_k3_rtc_resume);
649 
650 static struct platform_driver ti_k3_rtc_driver = {
651 	.probe = ti_k3_rtc_probe,
652 	.driver = {
653 		   .name = "rtc-ti-k3",
654 		   .of_match_table = ti_k3_rtc_of_match_table,
655 		   .pm = &ti_k3_rtc_pm_ops,
656 	},
657 };
658 module_platform_driver(ti_k3_rtc_driver);
659 
660 MODULE_LICENSE("GPL");
661 MODULE_DESCRIPTION("TI K3 RTC driver");
662 MODULE_AUTHOR("Nishanth Menon");
663