xref: /openbmc/linux/drivers/rtc/rtc-stmp3xxx.c (revision d47a97bd)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Freescale STMP37XX/STMP378X Real Time Clock driver
4  *
5  * Copyright (c) 2007 Sigmatel, Inc.
6  * Peter Hartley, <peter.hartley@sigmatel.com>
7  *
8  * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
9  * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
10  * Copyright 2011 Wolfram Sang, Pengutronix e.K.
11  */
12 #include <linux/kernel.h>
13 #include <linux/module.h>
14 #include <linux/io.h>
15 #include <linux/init.h>
16 #include <linux/platform_device.h>
17 #include <linux/interrupt.h>
18 #include <linux/delay.h>
19 #include <linux/rtc.h>
20 #include <linux/slab.h>
21 #include <linux/of_device.h>
22 #include <linux/of.h>
23 #include <linux/stmp_device.h>
24 #include <linux/stmp3xxx_rtc_wdt.h>
25 
26 #define STMP3XXX_RTC_CTRL			0x0
27 #define STMP3XXX_RTC_CTRL_ALARM_IRQ_EN		0x00000001
28 #define STMP3XXX_RTC_CTRL_ONEMSEC_IRQ_EN	0x00000002
29 #define STMP3XXX_RTC_CTRL_ALARM_IRQ		0x00000004
30 #define STMP3XXX_RTC_CTRL_WATCHDOGEN		0x00000010
31 
32 #define STMP3XXX_RTC_STAT			0x10
33 #define STMP3XXX_RTC_STAT_STALE_SHIFT		16
34 #define STMP3XXX_RTC_STAT_RTC_PRESENT		0x80000000
35 #define STMP3XXX_RTC_STAT_XTAL32000_PRESENT	0x10000000
36 #define STMP3XXX_RTC_STAT_XTAL32768_PRESENT	0x08000000
37 
38 #define STMP3XXX_RTC_SECONDS			0x30
39 
40 #define STMP3XXX_RTC_ALARM			0x40
41 
42 #define STMP3XXX_RTC_WATCHDOG			0x50
43 
44 #define STMP3XXX_RTC_PERSISTENT0		0x60
45 #define STMP3XXX_RTC_PERSISTENT0_CLOCKSOURCE		(1 << 0)
46 #define STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE_EN		(1 << 1)
47 #define STMP3XXX_RTC_PERSISTENT0_ALARM_EN		(1 << 2)
48 #define STMP3XXX_RTC_PERSISTENT0_XTAL24MHZ_PWRUP	(1 << 4)
49 #define STMP3XXX_RTC_PERSISTENT0_XTAL32KHZ_PWRUP	(1 << 5)
50 #define STMP3XXX_RTC_PERSISTENT0_XTAL32_FREQ		(1 << 6)
51 #define STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE		(1 << 7)
52 
53 #define STMP3XXX_RTC_PERSISTENT1		0x70
54 /* missing bitmask in headers */
55 #define STMP3XXX_RTC_PERSISTENT1_FORCE_UPDATER	0x80000000
56 
57 struct stmp3xxx_rtc_data {
58 	struct rtc_device *rtc;
59 	void __iomem *io;
60 	int irq_alarm;
61 };
62 
63 #if IS_ENABLED(CONFIG_STMP3XXX_RTC_WATCHDOG)
64 /**
65  * stmp3xxx_wdt_set_timeout - configure the watchdog inside the STMP3xxx RTC
66  * @dev: the parent device of the watchdog (= the RTC)
67  * @timeout: the desired value for the timeout register of the watchdog.
68  *           0 disables the watchdog
69  *
70  * The watchdog needs one register and two bits which are in the RTC domain.
71  * To handle the resource conflict, the RTC driver will create another
72  * platform_device for the watchdog driver as a child of the RTC device.
73  * The watchdog driver is passed the below accessor function via platform_data
74  * to configure the watchdog. Locking is not needed because accessing SET/CLR
75  * registers is atomic.
76  */
77 
78 static void stmp3xxx_wdt_set_timeout(struct device *dev, u32 timeout)
79 {
80 	struct stmp3xxx_rtc_data *rtc_data = dev_get_drvdata(dev);
81 
82 	if (timeout) {
83 		writel(timeout, rtc_data->io + STMP3XXX_RTC_WATCHDOG);
84 		writel(STMP3XXX_RTC_CTRL_WATCHDOGEN,
85 		       rtc_data->io + STMP3XXX_RTC_CTRL + STMP_OFFSET_REG_SET);
86 		writel(STMP3XXX_RTC_PERSISTENT1_FORCE_UPDATER,
87 		       rtc_data->io + STMP3XXX_RTC_PERSISTENT1 + STMP_OFFSET_REG_SET);
88 	} else {
89 		writel(STMP3XXX_RTC_CTRL_WATCHDOGEN,
90 		       rtc_data->io + STMP3XXX_RTC_CTRL + STMP_OFFSET_REG_CLR);
91 		writel(STMP3XXX_RTC_PERSISTENT1_FORCE_UPDATER,
92 		       rtc_data->io + STMP3XXX_RTC_PERSISTENT1 + STMP_OFFSET_REG_CLR);
93 	}
94 }
95 
96 static struct stmp3xxx_wdt_pdata wdt_pdata = {
97 	.wdt_set_timeout = stmp3xxx_wdt_set_timeout,
98 };
99 
100 static void stmp3xxx_wdt_register(struct platform_device *rtc_pdev)
101 {
102 	int rc = -1;
103 	struct platform_device *wdt_pdev =
104 		platform_device_alloc("stmp3xxx_rtc_wdt", rtc_pdev->id);
105 
106 	if (wdt_pdev) {
107 		wdt_pdev->dev.parent = &rtc_pdev->dev;
108 		wdt_pdev->dev.platform_data = &wdt_pdata;
109 		rc = platform_device_add(wdt_pdev);
110 		if (rc)
111 			platform_device_put(wdt_pdev);
112 	}
113 
114 	if (rc)
115 		dev_err(&rtc_pdev->dev,
116 			"failed to register stmp3xxx_rtc_wdt\n");
117 }
118 #else
119 static void stmp3xxx_wdt_register(struct platform_device *rtc_pdev)
120 {
121 }
122 #endif /* CONFIG_STMP3XXX_RTC_WATCHDOG */
123 
124 static int stmp3xxx_wait_time(struct stmp3xxx_rtc_data *rtc_data)
125 {
126 	int timeout = 5000; /* 3ms according to i.MX28 Ref Manual */
127 	/*
128 	 * The i.MX28 Applications Processor Reference Manual, Rev. 1, 2010
129 	 * states:
130 	 * | The order in which registers are updated is
131 	 * | Persistent 0, 1, 2, 3, 4, 5, Alarm, Seconds.
132 	 * | (This list is in bitfield order, from LSB to MSB, as they would
133 	 * | appear in the STALE_REGS and NEW_REGS bitfields of the HW_RTC_STAT
134 	 * | register. For example, the Seconds register corresponds to
135 	 * | STALE_REGS or NEW_REGS containing 0x80.)
136 	 */
137 	do {
138 		if (!(readl(rtc_data->io + STMP3XXX_RTC_STAT) &
139 				(0x80 << STMP3XXX_RTC_STAT_STALE_SHIFT)))
140 			return 0;
141 		udelay(1);
142 	} while (--timeout > 0);
143 	return (readl(rtc_data->io + STMP3XXX_RTC_STAT) &
144 		(0x80 << STMP3XXX_RTC_STAT_STALE_SHIFT)) ? -ETIME : 0;
145 }
146 
147 /* Time read/write */
148 static int stmp3xxx_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
149 {
150 	int ret;
151 	struct stmp3xxx_rtc_data *rtc_data = dev_get_drvdata(dev);
152 
153 	ret = stmp3xxx_wait_time(rtc_data);
154 	if (ret)
155 		return ret;
156 
157 	rtc_time64_to_tm(readl(rtc_data->io + STMP3XXX_RTC_SECONDS), rtc_tm);
158 	return 0;
159 }
160 
161 static int stmp3xxx_rtc_settime(struct device *dev, struct rtc_time *rtc_tm)
162 {
163 	struct stmp3xxx_rtc_data *rtc_data = dev_get_drvdata(dev);
164 
165 	writel(rtc_tm_to_time64(rtc_tm), rtc_data->io + STMP3XXX_RTC_SECONDS);
166 	return stmp3xxx_wait_time(rtc_data);
167 }
168 
169 /* interrupt(s) handler */
170 static irqreturn_t stmp3xxx_rtc_interrupt(int irq, void *dev_id)
171 {
172 	struct stmp3xxx_rtc_data *rtc_data = dev_get_drvdata(dev_id);
173 	u32 status = readl(rtc_data->io + STMP3XXX_RTC_CTRL);
174 
175 	if (status & STMP3XXX_RTC_CTRL_ALARM_IRQ) {
176 		writel(STMP3XXX_RTC_CTRL_ALARM_IRQ,
177 			rtc_data->io + STMP3XXX_RTC_CTRL + STMP_OFFSET_REG_CLR);
178 		rtc_update_irq(rtc_data->rtc, 1, RTC_AF | RTC_IRQF);
179 		return IRQ_HANDLED;
180 	}
181 
182 	return IRQ_NONE;
183 }
184 
185 static int stmp3xxx_alarm_irq_enable(struct device *dev, unsigned int enabled)
186 {
187 	struct stmp3xxx_rtc_data *rtc_data = dev_get_drvdata(dev);
188 
189 	if (enabled) {
190 		writel(STMP3XXX_RTC_PERSISTENT0_ALARM_EN |
191 				STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE_EN,
192 			rtc_data->io + STMP3XXX_RTC_PERSISTENT0 +
193 				STMP_OFFSET_REG_SET);
194 		writel(STMP3XXX_RTC_CTRL_ALARM_IRQ_EN,
195 			rtc_data->io + STMP3XXX_RTC_CTRL + STMP_OFFSET_REG_SET);
196 	} else {
197 		writel(STMP3XXX_RTC_PERSISTENT0_ALARM_EN |
198 				STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE_EN,
199 			rtc_data->io + STMP3XXX_RTC_PERSISTENT0 +
200 				STMP_OFFSET_REG_CLR);
201 		writel(STMP3XXX_RTC_CTRL_ALARM_IRQ_EN,
202 			rtc_data->io + STMP3XXX_RTC_CTRL + STMP_OFFSET_REG_CLR);
203 	}
204 	return 0;
205 }
206 
207 static int stmp3xxx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
208 {
209 	struct stmp3xxx_rtc_data *rtc_data = dev_get_drvdata(dev);
210 
211 	rtc_time64_to_tm(readl(rtc_data->io + STMP3XXX_RTC_ALARM), &alm->time);
212 	return 0;
213 }
214 
215 static int stmp3xxx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
216 {
217 	struct stmp3xxx_rtc_data *rtc_data = dev_get_drvdata(dev);
218 
219 	writel(rtc_tm_to_time64(&alm->time), rtc_data->io + STMP3XXX_RTC_ALARM);
220 
221 	stmp3xxx_alarm_irq_enable(dev, alm->enabled);
222 
223 	return 0;
224 }
225 
226 static const struct rtc_class_ops stmp3xxx_rtc_ops = {
227 	.alarm_irq_enable =
228 			  stmp3xxx_alarm_irq_enable,
229 	.read_time	= stmp3xxx_rtc_gettime,
230 	.set_time	= stmp3xxx_rtc_settime,
231 	.read_alarm	= stmp3xxx_rtc_read_alarm,
232 	.set_alarm	= stmp3xxx_rtc_set_alarm,
233 };
234 
235 static int stmp3xxx_rtc_remove(struct platform_device *pdev)
236 {
237 	struct stmp3xxx_rtc_data *rtc_data = platform_get_drvdata(pdev);
238 
239 	if (!rtc_data)
240 		return 0;
241 
242 	writel(STMP3XXX_RTC_CTRL_ALARM_IRQ_EN,
243 		rtc_data->io + STMP3XXX_RTC_CTRL + STMP_OFFSET_REG_CLR);
244 
245 	return 0;
246 }
247 
248 static int stmp3xxx_rtc_probe(struct platform_device *pdev)
249 {
250 	struct stmp3xxx_rtc_data *rtc_data;
251 	struct resource *r;
252 	u32 rtc_stat;
253 	u32 pers0_set, pers0_clr;
254 	u32 crystalfreq = 0;
255 	int err;
256 
257 	rtc_data = devm_kzalloc(&pdev->dev, sizeof(*rtc_data), GFP_KERNEL);
258 	if (!rtc_data)
259 		return -ENOMEM;
260 
261 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
262 	if (!r) {
263 		dev_err(&pdev->dev, "failed to get resource\n");
264 		return -ENXIO;
265 	}
266 
267 	rtc_data->io = devm_ioremap(&pdev->dev, r->start, resource_size(r));
268 	if (!rtc_data->io) {
269 		dev_err(&pdev->dev, "ioremap failed\n");
270 		return -EIO;
271 	}
272 
273 	rtc_data->irq_alarm = platform_get_irq(pdev, 0);
274 
275 	rtc_stat = readl(rtc_data->io + STMP3XXX_RTC_STAT);
276 	if (!(rtc_stat & STMP3XXX_RTC_STAT_RTC_PRESENT)) {
277 		dev_err(&pdev->dev, "no device onboard\n");
278 		return -ENODEV;
279 	}
280 
281 	platform_set_drvdata(pdev, rtc_data);
282 
283 	/*
284 	 * Resetting the rtc stops the watchdog timer that is potentially
285 	 * running. So (assuming it is running on purpose) don't reset if the
286 	 * watchdog is enabled.
287 	 */
288 	if (readl(rtc_data->io + STMP3XXX_RTC_CTRL) &
289 	    STMP3XXX_RTC_CTRL_WATCHDOGEN) {
290 		dev_info(&pdev->dev,
291 			 "Watchdog is running, skip resetting rtc\n");
292 	} else {
293 		err = stmp_reset_block(rtc_data->io);
294 		if (err) {
295 			dev_err(&pdev->dev, "stmp_reset_block failed: %d\n",
296 				err);
297 			return err;
298 		}
299 	}
300 
301 	/*
302 	 * Obviously the rtc needs a clock input to be able to run.
303 	 * This clock can be provided by an external 32k crystal. If that one is
304 	 * missing XTAL must not be disabled in suspend which consumes a
305 	 * lot of power. Normally the presence and exact frequency (supported
306 	 * are 32000 Hz and 32768 Hz) is detectable from fuses, but as reality
307 	 * proves these fuses are not blown correctly on all machines, so the
308 	 * frequency can be overridden in the device tree.
309 	 */
310 	if (rtc_stat & STMP3XXX_RTC_STAT_XTAL32000_PRESENT)
311 		crystalfreq = 32000;
312 	else if (rtc_stat & STMP3XXX_RTC_STAT_XTAL32768_PRESENT)
313 		crystalfreq = 32768;
314 
315 	of_property_read_u32(pdev->dev.of_node, "stmp,crystal-freq",
316 			     &crystalfreq);
317 
318 	switch (crystalfreq) {
319 	case 32000:
320 		/* keep 32kHz crystal running in low-power mode */
321 		pers0_set = STMP3XXX_RTC_PERSISTENT0_XTAL32_FREQ |
322 			STMP3XXX_RTC_PERSISTENT0_XTAL32KHZ_PWRUP |
323 			STMP3XXX_RTC_PERSISTENT0_CLOCKSOURCE;
324 		pers0_clr = STMP3XXX_RTC_PERSISTENT0_XTAL24MHZ_PWRUP;
325 		break;
326 	case 32768:
327 		/* keep 32.768kHz crystal running in low-power mode */
328 		pers0_set = STMP3XXX_RTC_PERSISTENT0_XTAL32KHZ_PWRUP |
329 			STMP3XXX_RTC_PERSISTENT0_CLOCKSOURCE;
330 		pers0_clr = STMP3XXX_RTC_PERSISTENT0_XTAL24MHZ_PWRUP |
331 			STMP3XXX_RTC_PERSISTENT0_XTAL32_FREQ;
332 		break;
333 	default:
334 		dev_warn(&pdev->dev,
335 			 "invalid crystal-freq specified in device-tree. Assuming no crystal\n");
336 		fallthrough;
337 	case 0:
338 		/* keep XTAL on in low-power mode */
339 		pers0_set = STMP3XXX_RTC_PERSISTENT0_XTAL24MHZ_PWRUP;
340 		pers0_clr = STMP3XXX_RTC_PERSISTENT0_XTAL32KHZ_PWRUP |
341 			STMP3XXX_RTC_PERSISTENT0_CLOCKSOURCE;
342 	}
343 
344 	writel(pers0_set, rtc_data->io + STMP3XXX_RTC_PERSISTENT0 +
345 			STMP_OFFSET_REG_SET);
346 
347 	writel(STMP3XXX_RTC_PERSISTENT0_ALARM_EN |
348 			STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE_EN |
349 			STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE | pers0_clr,
350 		rtc_data->io + STMP3XXX_RTC_PERSISTENT0 + STMP_OFFSET_REG_CLR);
351 
352 	writel(STMP3XXX_RTC_CTRL_ONEMSEC_IRQ_EN |
353 			STMP3XXX_RTC_CTRL_ALARM_IRQ_EN,
354 		rtc_data->io + STMP3XXX_RTC_CTRL + STMP_OFFSET_REG_CLR);
355 
356 	rtc_data->rtc = devm_rtc_allocate_device(&pdev->dev);
357 	if (IS_ERR(rtc_data->rtc))
358 		return PTR_ERR(rtc_data->rtc);
359 
360 	err = devm_request_irq(&pdev->dev, rtc_data->irq_alarm,
361 			stmp3xxx_rtc_interrupt, 0, "RTC alarm", &pdev->dev);
362 	if (err) {
363 		dev_err(&pdev->dev, "Cannot claim IRQ%d\n",
364 			rtc_data->irq_alarm);
365 		return err;
366 	}
367 
368 	rtc_data->rtc->ops = &stmp3xxx_rtc_ops;
369 	rtc_data->rtc->range_max = U32_MAX;
370 
371 	err = devm_rtc_register_device(rtc_data->rtc);
372 	if (err)
373 		return err;
374 
375 	stmp3xxx_wdt_register(pdev);
376 	return 0;
377 }
378 
379 #ifdef CONFIG_PM_SLEEP
380 static int stmp3xxx_rtc_suspend(struct device *dev)
381 {
382 	return 0;
383 }
384 
385 static int stmp3xxx_rtc_resume(struct device *dev)
386 {
387 	struct stmp3xxx_rtc_data *rtc_data = dev_get_drvdata(dev);
388 
389 	stmp_reset_block(rtc_data->io);
390 	writel(STMP3XXX_RTC_PERSISTENT0_ALARM_EN |
391 			STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE_EN |
392 			STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE,
393 		rtc_data->io + STMP3XXX_RTC_PERSISTENT0 + STMP_OFFSET_REG_CLR);
394 	return 0;
395 }
396 #endif
397 
398 static SIMPLE_DEV_PM_OPS(stmp3xxx_rtc_pm_ops, stmp3xxx_rtc_suspend,
399 			stmp3xxx_rtc_resume);
400 
401 static const struct of_device_id rtc_dt_ids[] = {
402 	{ .compatible = "fsl,stmp3xxx-rtc", },
403 	{ /* sentinel */ }
404 };
405 MODULE_DEVICE_TABLE(of, rtc_dt_ids);
406 
407 static struct platform_driver stmp3xxx_rtcdrv = {
408 	.probe		= stmp3xxx_rtc_probe,
409 	.remove		= stmp3xxx_rtc_remove,
410 	.driver		= {
411 		.name	= "stmp3xxx-rtc",
412 		.pm	= &stmp3xxx_rtc_pm_ops,
413 		.of_match_table = rtc_dt_ids,
414 	},
415 };
416 
417 module_platform_driver(stmp3xxx_rtcdrv);
418 
419 MODULE_DESCRIPTION("STMP3xxx RTC Driver");
420 MODULE_AUTHOR("dmitry pervushin <dpervushin@embeddedalley.com> and "
421 		"Wolfram Sang <kernel@pengutronix.de>");
422 MODULE_LICENSE("GPL");
423