1 /* 2 * drivers/rtc/rtc-spear.c 3 * 4 * Copyright (C) 2010 ST Microelectronics 5 * Rajeev Kumar<rajeev-dlh.kumar@st.com> 6 * 7 * This file is licensed under the terms of the GNU General Public 8 * License version 2. This program is licensed "as is" without any 9 * warranty of any kind, whether express or implied. 10 */ 11 12 #include <linux/bcd.h> 13 #include <linux/clk.h> 14 #include <linux/delay.h> 15 #include <linux/init.h> 16 #include <linux/io.h> 17 #include <linux/irq.h> 18 #include <linux/module.h> 19 #include <linux/of.h> 20 #include <linux/platform_device.h> 21 #include <linux/rtc.h> 22 #include <linux/slab.h> 23 #include <linux/spinlock.h> 24 25 /* RTC registers */ 26 #define TIME_REG 0x00 27 #define DATE_REG 0x04 28 #define ALARM_TIME_REG 0x08 29 #define ALARM_DATE_REG 0x0C 30 #define CTRL_REG 0x10 31 #define STATUS_REG 0x14 32 33 /* TIME_REG & ALARM_TIME_REG */ 34 #define SECONDS_UNITS (0xf<<0) /* seconds units position */ 35 #define SECONDS_TENS (0x7<<4) /* seconds tens position */ 36 #define MINUTES_UNITS (0xf<<8) /* minutes units position */ 37 #define MINUTES_TENS (0x7<<12) /* minutes tens position */ 38 #define HOURS_UNITS (0xf<<16) /* hours units position */ 39 #define HOURS_TENS (0x3<<20) /* hours tens position */ 40 41 /* DATE_REG & ALARM_DATE_REG */ 42 #define DAYS_UNITS (0xf<<0) /* days units position */ 43 #define DAYS_TENS (0x3<<4) /* days tens position */ 44 #define MONTHS_UNITS (0xf<<8) /* months units position */ 45 #define MONTHS_TENS (0x1<<12) /* months tens position */ 46 #define YEARS_UNITS (0xf<<16) /* years units position */ 47 #define YEARS_TENS (0xf<<20) /* years tens position */ 48 #define YEARS_HUNDREDS (0xf<<24) /* years hundereds position */ 49 #define YEARS_MILLENIUMS (0xf<<28) /* years millenium position */ 50 51 /* MASK SHIFT TIME_REG & ALARM_TIME_REG*/ 52 #define SECOND_SHIFT 0x00 /* seconds units */ 53 #define MINUTE_SHIFT 0x08 /* minutes units position */ 54 #define HOUR_SHIFT 0x10 /* hours units position */ 55 #define MDAY_SHIFT 0x00 /* Month day shift */ 56 #define MONTH_SHIFT 0x08 /* Month shift */ 57 #define YEAR_SHIFT 0x10 /* Year shift */ 58 59 #define SECOND_MASK 0x7F 60 #define MIN_MASK 0x7F 61 #define HOUR_MASK 0x3F 62 #define DAY_MASK 0x3F 63 #define MONTH_MASK 0x7F 64 #define YEAR_MASK 0xFFFF 65 66 /* date reg equal to time reg, for debug only */ 67 #define TIME_BYP (1<<9) 68 #define INT_ENABLE (1<<31) /* interrupt enable */ 69 70 /* STATUS_REG */ 71 #define CLK_UNCONNECTED (1<<0) 72 #define PEND_WR_TIME (1<<2) 73 #define PEND_WR_DATE (1<<3) 74 #define LOST_WR_TIME (1<<4) 75 #define LOST_WR_DATE (1<<5) 76 #define RTC_INT_MASK (1<<31) 77 #define STATUS_BUSY (PEND_WR_TIME | PEND_WR_DATE) 78 #define STATUS_FAIL (LOST_WR_TIME | LOST_WR_DATE) 79 80 struct spear_rtc_config { 81 struct rtc_device *rtc; 82 struct clk *clk; 83 spinlock_t lock; 84 void __iomem *ioaddr; 85 unsigned int irq_wake; 86 }; 87 88 static inline void spear_rtc_clear_interrupt(struct spear_rtc_config *config) 89 { 90 unsigned int val; 91 unsigned long flags; 92 93 spin_lock_irqsave(&config->lock, flags); 94 val = readl(config->ioaddr + STATUS_REG); 95 val |= RTC_INT_MASK; 96 writel(val, config->ioaddr + STATUS_REG); 97 spin_unlock_irqrestore(&config->lock, flags); 98 } 99 100 static inline void spear_rtc_enable_interrupt(struct spear_rtc_config *config) 101 { 102 unsigned int val; 103 104 val = readl(config->ioaddr + CTRL_REG); 105 if (!(val & INT_ENABLE)) { 106 spear_rtc_clear_interrupt(config); 107 val |= INT_ENABLE; 108 writel(val, config->ioaddr + CTRL_REG); 109 } 110 } 111 112 static inline void spear_rtc_disable_interrupt(struct spear_rtc_config *config) 113 { 114 unsigned int val; 115 116 val = readl(config->ioaddr + CTRL_REG); 117 if (val & INT_ENABLE) { 118 val &= ~INT_ENABLE; 119 writel(val, config->ioaddr + CTRL_REG); 120 } 121 } 122 123 static inline int is_write_complete(struct spear_rtc_config *config) 124 { 125 int ret = 0; 126 unsigned long flags; 127 128 spin_lock_irqsave(&config->lock, flags); 129 if ((readl(config->ioaddr + STATUS_REG)) & STATUS_FAIL) 130 ret = -EIO; 131 spin_unlock_irqrestore(&config->lock, flags); 132 133 return ret; 134 } 135 136 static void rtc_wait_not_busy(struct spear_rtc_config *config) 137 { 138 int status, count = 0; 139 unsigned long flags; 140 141 /* Assuming BUSY may stay active for 80 msec) */ 142 for (count = 0; count < 80; count++) { 143 spin_lock_irqsave(&config->lock, flags); 144 status = readl(config->ioaddr + STATUS_REG); 145 spin_unlock_irqrestore(&config->lock, flags); 146 if ((status & STATUS_BUSY) == 0) 147 break; 148 /* check status busy, after each msec */ 149 msleep(1); 150 } 151 } 152 153 static irqreturn_t spear_rtc_irq(int irq, void *dev_id) 154 { 155 struct spear_rtc_config *config = dev_id; 156 unsigned long flags, events = 0; 157 unsigned int irq_data; 158 159 spin_lock_irqsave(&config->lock, flags); 160 irq_data = readl(config->ioaddr + STATUS_REG); 161 spin_unlock_irqrestore(&config->lock, flags); 162 163 if ((irq_data & RTC_INT_MASK)) { 164 spear_rtc_clear_interrupt(config); 165 events = RTC_IRQF | RTC_AF; 166 rtc_update_irq(config->rtc, 1, events); 167 return IRQ_HANDLED; 168 } else 169 return IRQ_NONE; 170 171 } 172 173 static int tm2bcd(struct rtc_time *tm) 174 { 175 if (rtc_valid_tm(tm) != 0) 176 return -EINVAL; 177 tm->tm_sec = bin2bcd(tm->tm_sec); 178 tm->tm_min = bin2bcd(tm->tm_min); 179 tm->tm_hour = bin2bcd(tm->tm_hour); 180 tm->tm_mday = bin2bcd(tm->tm_mday); 181 tm->tm_mon = bin2bcd(tm->tm_mon + 1); 182 tm->tm_year = bin2bcd(tm->tm_year); 183 184 return 0; 185 } 186 187 static void bcd2tm(struct rtc_time *tm) 188 { 189 tm->tm_sec = bcd2bin(tm->tm_sec); 190 tm->tm_min = bcd2bin(tm->tm_min); 191 tm->tm_hour = bcd2bin(tm->tm_hour); 192 tm->tm_mday = bcd2bin(tm->tm_mday); 193 tm->tm_mon = bcd2bin(tm->tm_mon) - 1; 194 /* epoch == 1900 */ 195 tm->tm_year = bcd2bin(tm->tm_year); 196 } 197 198 /* 199 * spear_rtc_read_time - set the time 200 * @dev: rtc device in use 201 * @tm: holds date and time 202 * 203 * This function read time and date. On success it will return 0 204 * otherwise -ve error is returned. 205 */ 206 static int spear_rtc_read_time(struct device *dev, struct rtc_time *tm) 207 { 208 struct spear_rtc_config *config = dev_get_drvdata(dev); 209 unsigned int time, date; 210 211 /* we don't report wday/yday/isdst ... */ 212 rtc_wait_not_busy(config); 213 214 time = readl(config->ioaddr + TIME_REG); 215 date = readl(config->ioaddr + DATE_REG); 216 tm->tm_sec = (time >> SECOND_SHIFT) & SECOND_MASK; 217 tm->tm_min = (time >> MINUTE_SHIFT) & MIN_MASK; 218 tm->tm_hour = (time >> HOUR_SHIFT) & HOUR_MASK; 219 tm->tm_mday = (date >> MDAY_SHIFT) & DAY_MASK; 220 tm->tm_mon = (date >> MONTH_SHIFT) & MONTH_MASK; 221 tm->tm_year = (date >> YEAR_SHIFT) & YEAR_MASK; 222 223 bcd2tm(tm); 224 return 0; 225 } 226 227 /* 228 * spear_rtc_set_time - set the time 229 * @dev: rtc device in use 230 * @tm: holds date and time 231 * 232 * This function set time and date. On success it will return 0 233 * otherwise -ve error is returned. 234 */ 235 static int spear_rtc_set_time(struct device *dev, struct rtc_time *tm) 236 { 237 struct spear_rtc_config *config = dev_get_drvdata(dev); 238 unsigned int time, date, err = 0; 239 240 if (tm2bcd(tm) < 0) 241 return -EINVAL; 242 243 rtc_wait_not_busy(config); 244 time = (tm->tm_sec << SECOND_SHIFT) | (tm->tm_min << MINUTE_SHIFT) | 245 (tm->tm_hour << HOUR_SHIFT); 246 date = (tm->tm_mday << MDAY_SHIFT) | (tm->tm_mon << MONTH_SHIFT) | 247 (tm->tm_year << YEAR_SHIFT); 248 writel(time, config->ioaddr + TIME_REG); 249 writel(date, config->ioaddr + DATE_REG); 250 err = is_write_complete(config); 251 if (err < 0) 252 return err; 253 254 return 0; 255 } 256 257 /* 258 * spear_rtc_read_alarm - read the alarm time 259 * @dev: rtc device in use 260 * @alm: holds alarm date and time 261 * 262 * This function read alarm time and date. On success it will return 0 263 * otherwise -ve error is returned. 264 */ 265 static int spear_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm) 266 { 267 struct spear_rtc_config *config = dev_get_drvdata(dev); 268 unsigned int time, date; 269 270 rtc_wait_not_busy(config); 271 272 time = readl(config->ioaddr + ALARM_TIME_REG); 273 date = readl(config->ioaddr + ALARM_DATE_REG); 274 alm->time.tm_sec = (time >> SECOND_SHIFT) & SECOND_MASK; 275 alm->time.tm_min = (time >> MINUTE_SHIFT) & MIN_MASK; 276 alm->time.tm_hour = (time >> HOUR_SHIFT) & HOUR_MASK; 277 alm->time.tm_mday = (date >> MDAY_SHIFT) & DAY_MASK; 278 alm->time.tm_mon = (date >> MONTH_SHIFT) & MONTH_MASK; 279 alm->time.tm_year = (date >> YEAR_SHIFT) & YEAR_MASK; 280 281 bcd2tm(&alm->time); 282 alm->enabled = readl(config->ioaddr + CTRL_REG) & INT_ENABLE; 283 284 return 0; 285 } 286 287 /* 288 * spear_rtc_set_alarm - set the alarm time 289 * @dev: rtc device in use 290 * @alm: holds alarm date and time 291 * 292 * This function set alarm time and date. On success it will return 0 293 * otherwise -ve error is returned. 294 */ 295 static int spear_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) 296 { 297 struct spear_rtc_config *config = dev_get_drvdata(dev); 298 unsigned int time, date, err = 0; 299 300 if (tm2bcd(&alm->time) < 0) 301 return -EINVAL; 302 303 rtc_wait_not_busy(config); 304 305 time = (alm->time.tm_sec << SECOND_SHIFT) | (alm->time.tm_min << 306 MINUTE_SHIFT) | (alm->time.tm_hour << HOUR_SHIFT); 307 date = (alm->time.tm_mday << MDAY_SHIFT) | (alm->time.tm_mon << 308 MONTH_SHIFT) | (alm->time.tm_year << YEAR_SHIFT); 309 310 writel(time, config->ioaddr + ALARM_TIME_REG); 311 writel(date, config->ioaddr + ALARM_DATE_REG); 312 err = is_write_complete(config); 313 if (err < 0) 314 return err; 315 316 if (alm->enabled) 317 spear_rtc_enable_interrupt(config); 318 else 319 spear_rtc_disable_interrupt(config); 320 321 return 0; 322 } 323 324 static int spear_alarm_irq_enable(struct device *dev, unsigned int enabled) 325 { 326 struct spear_rtc_config *config = dev_get_drvdata(dev); 327 int ret = 0; 328 329 spear_rtc_clear_interrupt(config); 330 331 switch (enabled) { 332 case 0: 333 /* alarm off */ 334 spear_rtc_disable_interrupt(config); 335 break; 336 case 1: 337 /* alarm on */ 338 spear_rtc_enable_interrupt(config); 339 break; 340 default: 341 ret = -EINVAL; 342 break; 343 } 344 345 return ret; 346 } 347 348 static struct rtc_class_ops spear_rtc_ops = { 349 .read_time = spear_rtc_read_time, 350 .set_time = spear_rtc_set_time, 351 .read_alarm = spear_rtc_read_alarm, 352 .set_alarm = spear_rtc_set_alarm, 353 .alarm_irq_enable = spear_alarm_irq_enable, 354 }; 355 356 static int __devinit spear_rtc_probe(struct platform_device *pdev) 357 { 358 struct resource *res; 359 struct spear_rtc_config *config; 360 unsigned int status = 0; 361 int irq; 362 363 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 364 if (!res) { 365 dev_err(&pdev->dev, "no resource defined\n"); 366 return -EBUSY; 367 } 368 if (!request_mem_region(res->start, resource_size(res), pdev->name)) { 369 dev_err(&pdev->dev, "rtc region already claimed\n"); 370 return -EBUSY; 371 } 372 373 config = kzalloc(sizeof(*config), GFP_KERNEL); 374 if (!config) { 375 dev_err(&pdev->dev, "out of memory\n"); 376 status = -ENOMEM; 377 goto err_release_region; 378 } 379 380 config->clk = clk_get(&pdev->dev, NULL); 381 if (IS_ERR(config->clk)) { 382 status = PTR_ERR(config->clk); 383 goto err_kfree; 384 } 385 386 status = clk_enable(config->clk); 387 if (status < 0) 388 goto err_clk_put; 389 390 config->ioaddr = ioremap(res->start, resource_size(res)); 391 if (!config->ioaddr) { 392 dev_err(&pdev->dev, "ioremap fail\n"); 393 status = -ENOMEM; 394 goto err_disable_clock; 395 } 396 397 spin_lock_init(&config->lock); 398 platform_set_drvdata(pdev, config); 399 400 config->rtc = rtc_device_register(pdev->name, &pdev->dev, 401 &spear_rtc_ops, THIS_MODULE); 402 if (IS_ERR(config->rtc)) { 403 dev_err(&pdev->dev, "can't register RTC device, err %ld\n", 404 PTR_ERR(config->rtc)); 405 status = PTR_ERR(config->rtc); 406 goto err_iounmap; 407 } 408 409 /* alarm irqs */ 410 irq = platform_get_irq(pdev, 0); 411 if (irq < 0) { 412 dev_err(&pdev->dev, "no update irq?\n"); 413 status = irq; 414 goto err_clear_platdata; 415 } 416 417 status = request_irq(irq, spear_rtc_irq, 0, pdev->name, config); 418 if (status) { 419 dev_err(&pdev->dev, "Alarm interrupt IRQ%d already \ 420 claimed\n", irq); 421 goto err_clear_platdata; 422 } 423 424 if (!device_can_wakeup(&pdev->dev)) 425 device_init_wakeup(&pdev->dev, 1); 426 427 return 0; 428 429 err_clear_platdata: 430 platform_set_drvdata(pdev, NULL); 431 rtc_device_unregister(config->rtc); 432 err_iounmap: 433 iounmap(config->ioaddr); 434 err_disable_clock: 435 clk_disable(config->clk); 436 err_clk_put: 437 clk_put(config->clk); 438 err_kfree: 439 kfree(config); 440 err_release_region: 441 release_mem_region(res->start, resource_size(res)); 442 443 return status; 444 } 445 446 static int __devexit spear_rtc_remove(struct platform_device *pdev) 447 { 448 struct spear_rtc_config *config = platform_get_drvdata(pdev); 449 int irq; 450 struct resource *res; 451 452 /* leave rtc running, but disable irqs */ 453 spear_rtc_disable_interrupt(config); 454 device_init_wakeup(&pdev->dev, 0); 455 irq = platform_get_irq(pdev, 0); 456 if (irq) 457 free_irq(irq, pdev); 458 clk_disable(config->clk); 459 clk_put(config->clk); 460 iounmap(config->ioaddr); 461 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 462 if (res) 463 release_mem_region(res->start, resource_size(res)); 464 platform_set_drvdata(pdev, NULL); 465 rtc_device_unregister(config->rtc); 466 kfree(config); 467 468 return 0; 469 } 470 471 #ifdef CONFIG_PM 472 473 static int spear_rtc_suspend(struct platform_device *pdev, pm_message_t state) 474 { 475 struct spear_rtc_config *config = platform_get_drvdata(pdev); 476 int irq; 477 478 irq = platform_get_irq(pdev, 0); 479 if (device_may_wakeup(&pdev->dev)) { 480 if (!enable_irq_wake(irq)) 481 config->irq_wake = 1; 482 } else { 483 spear_rtc_disable_interrupt(config); 484 clk_disable(config->clk); 485 } 486 487 return 0; 488 } 489 490 static int spear_rtc_resume(struct platform_device *pdev) 491 { 492 struct spear_rtc_config *config = platform_get_drvdata(pdev); 493 int irq; 494 495 irq = platform_get_irq(pdev, 0); 496 497 if (device_may_wakeup(&pdev->dev)) { 498 if (config->irq_wake) { 499 disable_irq_wake(irq); 500 config->irq_wake = 0; 501 } 502 } else { 503 clk_enable(config->clk); 504 spear_rtc_enable_interrupt(config); 505 } 506 507 return 0; 508 } 509 510 #else 511 #define spear_rtc_suspend NULL 512 #define spear_rtc_resume NULL 513 #endif 514 515 static void spear_rtc_shutdown(struct platform_device *pdev) 516 { 517 struct spear_rtc_config *config = platform_get_drvdata(pdev); 518 519 spear_rtc_disable_interrupt(config); 520 clk_disable(config->clk); 521 } 522 523 #ifdef CONFIG_OF 524 static const struct of_device_id spear_rtc_id_table[] = { 525 { .compatible = "st,spear600-rtc" }, 526 {} 527 }; 528 MODULE_DEVICE_TABLE(of, spear_rtc_id_table); 529 #endif 530 531 static struct platform_driver spear_rtc_driver = { 532 .probe = spear_rtc_probe, 533 .remove = __devexit_p(spear_rtc_remove), 534 .suspend = spear_rtc_suspend, 535 .resume = spear_rtc_resume, 536 .shutdown = spear_rtc_shutdown, 537 .driver = { 538 .name = "rtc-spear", 539 .of_match_table = of_match_ptr(spear_rtc_id_table), 540 }, 541 }; 542 543 module_platform_driver(spear_rtc_driver); 544 545 MODULE_ALIAS("platform:rtc-spear"); 546 MODULE_AUTHOR("Rajeev Kumar <rajeev-dlh.kumar@st.com>"); 547 MODULE_DESCRIPTION("ST SPEAr Realtime Clock Driver (RTC)"); 548 MODULE_LICENSE("GPL"); 549