1 /* 2 * Driver for Epson's RTC module RX-8025 SA/NB 3 * 4 * Copyright (C) 2009 Wolfgang Grandegger <wg@grandegger.com> 5 * 6 * Copyright (C) 2005 by Digi International Inc. 7 * All rights reserved. 8 * 9 * Modified by fengjh at rising.com.cn 10 * <lm-sensors@lm-sensors.org> 11 * 2006.11 12 * 13 * Code cleanup by Sergei Poselenov, <sposelenov@emcraft.com> 14 * Converted to new style by Wolfgang Grandegger <wg@grandegger.com> 15 * Alarm and periodic interrupt added by Dmitry Rakhchev <rda@emcraft.com> 16 * 17 * This program is free software; you can redistribute it and/or 18 * modify it under the terms of the GNU General Public License 19 * version 2 as published by the Free Software Foundation. 20 */ 21 #include <linux/bcd.h> 22 #include <linux/bitops.h> 23 #include <linux/i2c.h> 24 #include <linux/kernel.h> 25 #include <linux/module.h> 26 #include <linux/rtc.h> 27 28 /* Register definitions */ 29 #define RX8025_REG_SEC 0x00 30 #define RX8025_REG_MIN 0x01 31 #define RX8025_REG_HOUR 0x02 32 #define RX8025_REG_WDAY 0x03 33 #define RX8025_REG_MDAY 0x04 34 #define RX8025_REG_MONTH 0x05 35 #define RX8025_REG_YEAR 0x06 36 #define RX8025_REG_DIGOFF 0x07 37 #define RX8025_REG_ALWMIN 0x08 38 #define RX8025_REG_ALWHOUR 0x09 39 #define RX8025_REG_ALWWDAY 0x0a 40 #define RX8025_REG_ALDMIN 0x0b 41 #define RX8025_REG_ALDHOUR 0x0c 42 /* 0x0d is reserved */ 43 #define RX8025_REG_CTRL1 0x0e 44 #define RX8025_REG_CTRL2 0x0f 45 46 #define RX8025_BIT_CTRL1_CT (7 << 0) 47 /* 1 Hz periodic level irq */ 48 #define RX8025_BIT_CTRL1_CT_1HZ 4 49 #define RX8025_BIT_CTRL1_TEST BIT(3) 50 #define RX8025_BIT_CTRL1_1224 BIT(5) 51 #define RX8025_BIT_CTRL1_DALE BIT(6) 52 #define RX8025_BIT_CTRL1_WALE BIT(7) 53 54 #define RX8025_BIT_CTRL2_DAFG BIT(0) 55 #define RX8025_BIT_CTRL2_WAFG BIT(1) 56 #define RX8025_BIT_CTRL2_CTFG BIT(2) 57 #define RX8025_BIT_CTRL2_PON BIT(4) 58 #define RX8025_BIT_CTRL2_XST BIT(5) 59 #define RX8025_BIT_CTRL2_VDET BIT(6) 60 61 /* Clock precision adjustment */ 62 #define RX8025_ADJ_RESOLUTION 3050 /* in ppb */ 63 #define RX8025_ADJ_DATA_MAX 62 64 #define RX8025_ADJ_DATA_MIN -62 65 66 static const struct i2c_device_id rx8025_id[] = { 67 { "rx8025", 0 }, 68 { } 69 }; 70 MODULE_DEVICE_TABLE(i2c, rx8025_id); 71 72 struct rx8025_data { 73 struct i2c_client *client; 74 struct rtc_device *rtc; 75 u8 ctrl1; 76 }; 77 78 static s32 rx8025_read_reg(const struct i2c_client *client, u8 number) 79 { 80 return i2c_smbus_read_byte_data(client, number << 4); 81 } 82 83 static int rx8025_read_regs(const struct i2c_client *client, 84 u8 number, u8 length, u8 *values) 85 { 86 int ret = i2c_smbus_read_i2c_block_data(client, number << 4, length, 87 values); 88 if (ret != length) 89 return ret < 0 ? ret : -EIO; 90 91 return 0; 92 } 93 94 static s32 rx8025_write_reg(const struct i2c_client *client, u8 number, 95 u8 value) 96 { 97 return i2c_smbus_write_byte_data(client, number << 4, value); 98 } 99 100 static s32 rx8025_write_regs(const struct i2c_client *client, 101 u8 number, u8 length, const u8 *values) 102 { 103 return i2c_smbus_write_i2c_block_data(client, number << 4, 104 length, values); 105 } 106 107 static int rx8025_check_validity(struct device *dev) 108 { 109 struct rx8025_data *rx8025 = dev_get_drvdata(dev); 110 int ctrl2; 111 112 ctrl2 = rx8025_read_reg(rx8025->client, RX8025_REG_CTRL2); 113 if (ctrl2 < 0) 114 return ctrl2; 115 116 if (ctrl2 & RX8025_BIT_CTRL2_VDET) 117 dev_warn(dev, "power voltage drop detected\n"); 118 119 if (ctrl2 & RX8025_BIT_CTRL2_PON) { 120 dev_warn(dev, "power-on reset detected, date is invalid\n"); 121 return -EINVAL; 122 } 123 124 if (!(ctrl2 & RX8025_BIT_CTRL2_XST)) { 125 dev_warn(dev, "crystal stopped, date is invalid\n"); 126 return -EINVAL; 127 } 128 129 return 0; 130 } 131 132 static int rx8025_reset_validity(struct i2c_client *client) 133 { 134 int ctrl2 = rx8025_read_reg(client, RX8025_REG_CTRL2); 135 136 if (ctrl2 < 0) 137 return ctrl2; 138 139 ctrl2 &= ~(RX8025_BIT_CTRL2_PON | RX8025_BIT_CTRL2_VDET); 140 141 return rx8025_write_reg(client, RX8025_REG_CTRL2, 142 ctrl2 | RX8025_BIT_CTRL2_XST); 143 } 144 145 static irqreturn_t rx8025_handle_irq(int irq, void *dev_id) 146 { 147 struct i2c_client *client = dev_id; 148 struct rx8025_data *rx8025 = i2c_get_clientdata(client); 149 struct mutex *lock = &rx8025->rtc->ops_lock; 150 int status; 151 152 mutex_lock(lock); 153 status = rx8025_read_reg(client, RX8025_REG_CTRL2); 154 if (status < 0) 155 goto out; 156 157 if (!(status & RX8025_BIT_CTRL2_XST)) 158 dev_warn(&client->dev, "Oscillation stop was detected," 159 "you may have to readjust the clock\n"); 160 161 if (status & RX8025_BIT_CTRL2_CTFG) { 162 /* periodic */ 163 status &= ~RX8025_BIT_CTRL2_CTFG; 164 rtc_update_irq(rx8025->rtc, 1, RTC_PF | RTC_IRQF); 165 } 166 167 if (status & RX8025_BIT_CTRL2_DAFG) { 168 /* alarm */ 169 status &= RX8025_BIT_CTRL2_DAFG; 170 if (rx8025_write_reg(client, RX8025_REG_CTRL1, 171 rx8025->ctrl1 & ~RX8025_BIT_CTRL1_DALE)) 172 goto out; 173 rtc_update_irq(rx8025->rtc, 1, RTC_AF | RTC_IRQF); 174 } 175 176 out: 177 mutex_unlock(lock); 178 179 return IRQ_HANDLED; 180 } 181 182 static int rx8025_get_time(struct device *dev, struct rtc_time *dt) 183 { 184 struct rx8025_data *rx8025 = dev_get_drvdata(dev); 185 u8 date[7]; 186 int err; 187 188 err = rx8025_check_validity(dev); 189 if (err) 190 return err; 191 192 err = rx8025_read_regs(rx8025->client, RX8025_REG_SEC, 7, date); 193 if (err) 194 return err; 195 196 dev_dbg(dev, "%s: read 0x%02x 0x%02x " 197 "0x%02x 0x%02x 0x%02x 0x%02x 0x%02x\n", __func__, 198 date[0], date[1], date[2], date[3], date[4], 199 date[5], date[6]); 200 201 dt->tm_sec = bcd2bin(date[RX8025_REG_SEC] & 0x7f); 202 dt->tm_min = bcd2bin(date[RX8025_REG_MIN] & 0x7f); 203 if (rx8025->ctrl1 & RX8025_BIT_CTRL1_1224) 204 dt->tm_hour = bcd2bin(date[RX8025_REG_HOUR] & 0x3f); 205 else 206 dt->tm_hour = bcd2bin(date[RX8025_REG_HOUR] & 0x1f) % 12 207 + (date[RX8025_REG_HOUR] & 0x20 ? 12 : 0); 208 209 dt->tm_mday = bcd2bin(date[RX8025_REG_MDAY] & 0x3f); 210 dt->tm_mon = bcd2bin(date[RX8025_REG_MONTH] & 0x1f) - 1; 211 dt->tm_year = bcd2bin(date[RX8025_REG_YEAR]) + 100; 212 213 dev_dbg(dev, "%s: date %ds %dm %dh %dmd %dm %dy\n", __func__, 214 dt->tm_sec, dt->tm_min, dt->tm_hour, 215 dt->tm_mday, dt->tm_mon, dt->tm_year); 216 217 return 0; 218 } 219 220 static int rx8025_set_time(struct device *dev, struct rtc_time *dt) 221 { 222 struct rx8025_data *rx8025 = dev_get_drvdata(dev); 223 u8 date[7]; 224 int ret; 225 226 if ((dt->tm_year < 100) || (dt->tm_year > 199)) 227 return -EINVAL; 228 229 /* 230 * Here the read-only bits are written as "0". I'm not sure if that 231 * is sound. 232 */ 233 date[RX8025_REG_SEC] = bin2bcd(dt->tm_sec); 234 date[RX8025_REG_MIN] = bin2bcd(dt->tm_min); 235 if (rx8025->ctrl1 & RX8025_BIT_CTRL1_1224) 236 date[RX8025_REG_HOUR] = bin2bcd(dt->tm_hour); 237 else 238 date[RX8025_REG_HOUR] = (dt->tm_hour >= 12 ? 0x20 : 0) 239 | bin2bcd((dt->tm_hour + 11) % 12 + 1); 240 241 date[RX8025_REG_WDAY] = bin2bcd(dt->tm_wday); 242 date[RX8025_REG_MDAY] = bin2bcd(dt->tm_mday); 243 date[RX8025_REG_MONTH] = bin2bcd(dt->tm_mon + 1); 244 date[RX8025_REG_YEAR] = bin2bcd(dt->tm_year - 100); 245 246 dev_dbg(dev, 247 "%s: write 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x\n", 248 __func__, 249 date[0], date[1], date[2], date[3], date[4], date[5], date[6]); 250 251 ret = rx8025_write_regs(rx8025->client, RX8025_REG_SEC, 7, date); 252 if (ret < 0) 253 return ret; 254 255 return rx8025_reset_validity(rx8025->client); 256 } 257 258 static int rx8025_init_client(struct i2c_client *client) 259 { 260 struct rx8025_data *rx8025 = i2c_get_clientdata(client); 261 u8 ctrl[2], ctrl2; 262 int need_clear = 0; 263 int err; 264 265 err = rx8025_read_regs(rx8025->client, RX8025_REG_CTRL1, 2, ctrl); 266 if (err) 267 goto out; 268 269 /* Keep test bit zero ! */ 270 rx8025->ctrl1 = ctrl[0] & ~RX8025_BIT_CTRL1_TEST; 271 272 if (ctrl[1] & (RX8025_BIT_CTRL2_DAFG | RX8025_BIT_CTRL2_WAFG)) { 273 dev_warn(&client->dev, "Alarm was detected\n"); 274 need_clear = 1; 275 } 276 277 if (ctrl[1] & RX8025_BIT_CTRL2_CTFG) 278 need_clear = 1; 279 280 if (need_clear) { 281 ctrl2 = ctrl[1]; 282 ctrl2 &= ~(RX8025_BIT_CTRL2_CTFG | RX8025_BIT_CTRL2_WAFG | 283 RX8025_BIT_CTRL2_DAFG); 284 285 err = rx8025_write_reg(client, RX8025_REG_CTRL2, ctrl2); 286 } 287 out: 288 return err; 289 } 290 291 /* Alarm support */ 292 static int rx8025_read_alarm(struct device *dev, struct rtc_wkalrm *t) 293 { 294 struct rx8025_data *rx8025 = dev_get_drvdata(dev); 295 struct i2c_client *client = rx8025->client; 296 u8 ald[2]; 297 int ctrl2, err; 298 299 if (client->irq <= 0) 300 return -EINVAL; 301 302 err = rx8025_read_regs(client, RX8025_REG_ALDMIN, 2, ald); 303 if (err) 304 return err; 305 306 ctrl2 = rx8025_read_reg(client, RX8025_REG_CTRL2); 307 if (ctrl2 < 0) 308 return ctrl2; 309 310 dev_dbg(dev, "%s: read alarm 0x%02x 0x%02x ctrl2 %02x\n", 311 __func__, ald[0], ald[1], ctrl2); 312 313 /* Hardware alarms precision is 1 minute! */ 314 t->time.tm_sec = 0; 315 t->time.tm_min = bcd2bin(ald[0] & 0x7f); 316 if (rx8025->ctrl1 & RX8025_BIT_CTRL1_1224) 317 t->time.tm_hour = bcd2bin(ald[1] & 0x3f); 318 else 319 t->time.tm_hour = bcd2bin(ald[1] & 0x1f) % 12 320 + (ald[1] & 0x20 ? 12 : 0); 321 322 dev_dbg(dev, "%s: date: %ds %dm %dh %dmd %dm %dy\n", 323 __func__, 324 t->time.tm_sec, t->time.tm_min, t->time.tm_hour, 325 t->time.tm_mday, t->time.tm_mon, t->time.tm_year); 326 t->enabled = !!(rx8025->ctrl1 & RX8025_BIT_CTRL1_DALE); 327 t->pending = (ctrl2 & RX8025_BIT_CTRL2_DAFG) && t->enabled; 328 329 return err; 330 } 331 332 static int rx8025_set_alarm(struct device *dev, struct rtc_wkalrm *t) 333 { 334 struct i2c_client *client = to_i2c_client(dev); 335 struct rx8025_data *rx8025 = dev_get_drvdata(dev); 336 u8 ald[2]; 337 int err; 338 339 if (client->irq <= 0) 340 return -EINVAL; 341 342 /* 343 * Hardware alarm precision is 1 minute! 344 * round up to nearest minute 345 */ 346 if (t->time.tm_sec) { 347 time64_t alarm_time = rtc_tm_to_time64(&t->time); 348 349 alarm_time += 60 - t->time.tm_sec; 350 rtc_time64_to_tm(alarm_time, &t->time); 351 } 352 353 ald[0] = bin2bcd(t->time.tm_min); 354 if (rx8025->ctrl1 & RX8025_BIT_CTRL1_1224) 355 ald[1] = bin2bcd(t->time.tm_hour); 356 else 357 ald[1] = (t->time.tm_hour >= 12 ? 0x20 : 0) 358 | bin2bcd((t->time.tm_hour + 11) % 12 + 1); 359 360 dev_dbg(dev, "%s: write 0x%02x 0x%02x\n", __func__, ald[0], ald[1]); 361 362 if (rx8025->ctrl1 & RX8025_BIT_CTRL1_DALE) { 363 rx8025->ctrl1 &= ~RX8025_BIT_CTRL1_DALE; 364 err = rx8025_write_reg(rx8025->client, RX8025_REG_CTRL1, 365 rx8025->ctrl1); 366 if (err) 367 return err; 368 } 369 err = rx8025_write_regs(rx8025->client, RX8025_REG_ALDMIN, 2, ald); 370 if (err) 371 return err; 372 373 if (t->enabled) { 374 rx8025->ctrl1 |= RX8025_BIT_CTRL1_DALE; 375 err = rx8025_write_reg(rx8025->client, RX8025_REG_CTRL1, 376 rx8025->ctrl1); 377 if (err) 378 return err; 379 } 380 381 return 0; 382 } 383 384 static int rx8025_alarm_irq_enable(struct device *dev, unsigned int enabled) 385 { 386 struct rx8025_data *rx8025 = dev_get_drvdata(dev); 387 u8 ctrl1; 388 int err; 389 390 ctrl1 = rx8025->ctrl1; 391 if (enabled) 392 ctrl1 |= RX8025_BIT_CTRL1_DALE; 393 else 394 ctrl1 &= ~RX8025_BIT_CTRL1_DALE; 395 396 if (ctrl1 != rx8025->ctrl1) { 397 rx8025->ctrl1 = ctrl1; 398 err = rx8025_write_reg(rx8025->client, RX8025_REG_CTRL1, 399 rx8025->ctrl1); 400 if (err) 401 return err; 402 } 403 return 0; 404 } 405 406 static const struct rtc_class_ops rx8025_rtc_ops = { 407 .read_time = rx8025_get_time, 408 .set_time = rx8025_set_time, 409 .read_alarm = rx8025_read_alarm, 410 .set_alarm = rx8025_set_alarm, 411 .alarm_irq_enable = rx8025_alarm_irq_enable, 412 }; 413 414 /* 415 * Clock precision adjustment support 416 * 417 * According to the RX8025 SA/NB application manual the frequency and 418 * temperature characteristics can be approximated using the following 419 * equation: 420 * 421 * df = a * (ut - t)**2 422 * 423 * df: Frequency deviation in any temperature 424 * a : Coefficient = (-35 +-5) * 10**-9 425 * ut: Ultimate temperature in degree = +25 +-5 degree 426 * t : Any temperature in degree 427 * 428 * Note that the clock adjustment in ppb must be entered (which is 429 * the negative value of the deviation). 430 */ 431 static int rx8025_get_clock_adjust(struct device *dev, int *adj) 432 { 433 struct i2c_client *client = to_i2c_client(dev); 434 int digoff; 435 436 digoff = rx8025_read_reg(client, RX8025_REG_DIGOFF); 437 if (digoff < 0) 438 return digoff; 439 440 *adj = digoff >= 64 ? digoff - 128 : digoff; 441 if (*adj > 0) 442 (*adj)--; 443 *adj *= -RX8025_ADJ_RESOLUTION; 444 445 return 0; 446 } 447 448 static int rx8025_set_clock_adjust(struct device *dev, int adj) 449 { 450 struct i2c_client *client = to_i2c_client(dev); 451 u8 digoff; 452 int err; 453 454 adj /= -RX8025_ADJ_RESOLUTION; 455 if (adj > RX8025_ADJ_DATA_MAX) 456 adj = RX8025_ADJ_DATA_MAX; 457 else if (adj < RX8025_ADJ_DATA_MIN) 458 adj = RX8025_ADJ_DATA_MIN; 459 else if (adj > 0) 460 adj++; 461 else if (adj < 0) 462 adj += 128; 463 digoff = adj; 464 465 err = rx8025_write_reg(client, RX8025_REG_DIGOFF, digoff); 466 if (err) 467 return err; 468 469 dev_dbg(dev, "%s: write 0x%02x\n", __func__, digoff); 470 471 return 0; 472 } 473 474 static ssize_t rx8025_sysfs_show_clock_adjust(struct device *dev, 475 struct device_attribute *attr, 476 char *buf) 477 { 478 int err, adj; 479 480 err = rx8025_get_clock_adjust(dev, &adj); 481 if (err) 482 return err; 483 484 return sprintf(buf, "%d\n", adj); 485 } 486 487 static ssize_t rx8025_sysfs_store_clock_adjust(struct device *dev, 488 struct device_attribute *attr, 489 const char *buf, size_t count) 490 { 491 int adj, err; 492 493 if (sscanf(buf, "%i", &adj) != 1) 494 return -EINVAL; 495 496 err = rx8025_set_clock_adjust(dev, adj); 497 498 return err ? err : count; 499 } 500 501 static DEVICE_ATTR(clock_adjust_ppb, S_IRUGO | S_IWUSR, 502 rx8025_sysfs_show_clock_adjust, 503 rx8025_sysfs_store_clock_adjust); 504 505 static int rx8025_sysfs_register(struct device *dev) 506 { 507 return device_create_file(dev, &dev_attr_clock_adjust_ppb); 508 } 509 510 static void rx8025_sysfs_unregister(struct device *dev) 511 { 512 device_remove_file(dev, &dev_attr_clock_adjust_ppb); 513 } 514 515 static int rx8025_probe(struct i2c_client *client, 516 const struct i2c_device_id *id) 517 { 518 struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); 519 struct rx8025_data *rx8025; 520 int err = 0; 521 522 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA 523 | I2C_FUNC_SMBUS_I2C_BLOCK)) { 524 dev_err(&adapter->dev, 525 "doesn't support required functionality\n"); 526 return -EIO; 527 } 528 529 rx8025 = devm_kzalloc(&client->dev, sizeof(*rx8025), GFP_KERNEL); 530 if (!rx8025) 531 return -ENOMEM; 532 533 rx8025->client = client; 534 i2c_set_clientdata(client, rx8025); 535 536 err = rx8025_init_client(client); 537 if (err) 538 return err; 539 540 rx8025->rtc = devm_rtc_device_register(&client->dev, client->name, 541 &rx8025_rtc_ops, THIS_MODULE); 542 if (IS_ERR(rx8025->rtc)) { 543 dev_err(&client->dev, "unable to register the class device\n"); 544 return PTR_ERR(rx8025->rtc); 545 } 546 547 if (client->irq > 0) { 548 dev_info(&client->dev, "IRQ %d supplied\n", client->irq); 549 err = devm_request_threaded_irq(&client->dev, client->irq, NULL, 550 rx8025_handle_irq, 551 IRQF_ONESHOT, 552 "rx8025", client); 553 if (err) { 554 dev_err(&client->dev, "unable to request IRQ, alarms disabled\n"); 555 client->irq = 0; 556 } 557 } 558 559 rx8025->rtc->max_user_freq = 1; 560 561 /* the rx8025 alarm only supports a minute accuracy */ 562 rx8025->rtc->uie_unsupported = 1; 563 564 err = rx8025_sysfs_register(&client->dev); 565 return err; 566 } 567 568 static int rx8025_remove(struct i2c_client *client) 569 { 570 rx8025_sysfs_unregister(&client->dev); 571 return 0; 572 } 573 574 static struct i2c_driver rx8025_driver = { 575 .driver = { 576 .name = "rtc-rx8025", 577 }, 578 .probe = rx8025_probe, 579 .remove = rx8025_remove, 580 .id_table = rx8025_id, 581 }; 582 583 module_i2c_driver(rx8025_driver); 584 585 MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>"); 586 MODULE_DESCRIPTION("RX-8025 SA/NB RTC driver"); 587 MODULE_LICENSE("GPL"); 588