1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * An I2C driver for Ricoh RS5C372, R2025S/D and RV5C38[67] RTCs 4 * 5 * Copyright (C) 2005 Pavel Mironchik <pmironchik@optifacio.net> 6 * Copyright (C) 2006 Tower Technologies 7 * Copyright (C) 2008 Paul Mundt 8 */ 9 10 #include <linux/i2c.h> 11 #include <linux/rtc.h> 12 #include <linux/bcd.h> 13 #include <linux/slab.h> 14 #include <linux/module.h> 15 #include <linux/of_device.h> 16 17 /* 18 * Ricoh has a family of I2C based RTCs, which differ only slightly from 19 * each other. Differences center on pinout (e.g. how many interrupts, 20 * output clock, etc) and how the control registers are used. The '372 21 * is significant only because that's the one this driver first supported. 22 */ 23 #define RS5C372_REG_SECS 0 24 #define RS5C372_REG_MINS 1 25 #define RS5C372_REG_HOURS 2 26 #define RS5C372_REG_WDAY 3 27 #define RS5C372_REG_DAY 4 28 #define RS5C372_REG_MONTH 5 29 #define RS5C372_REG_YEAR 6 30 #define RS5C372_REG_TRIM 7 31 # define RS5C372_TRIM_XSL 0x80 /* only if RS5C372[a|b] */ 32 # define RS5C372_TRIM_MASK 0x7F 33 # define R2221TL_TRIM_DEV (1 << 7) /* only if R2221TL */ 34 # define RS5C372_TRIM_DECR (1 << 6) 35 36 #define RS5C_REG_ALARM_A_MIN 8 /* or ALARM_W */ 37 #define RS5C_REG_ALARM_A_HOURS 9 38 #define RS5C_REG_ALARM_A_WDAY 10 39 40 #define RS5C_REG_ALARM_B_MIN 11 /* or ALARM_D */ 41 #define RS5C_REG_ALARM_B_HOURS 12 42 #define RS5C_REG_ALARM_B_WDAY 13 /* (ALARM_B only) */ 43 44 #define RS5C_REG_CTRL1 14 45 # define RS5C_CTRL1_AALE (1 << 7) /* or WALE */ 46 # define RS5C_CTRL1_BALE (1 << 6) /* or DALE */ 47 # define RV5C387_CTRL1_24 (1 << 5) 48 # define RS5C372A_CTRL1_SL1 (1 << 5) 49 # define RS5C_CTRL1_CT_MASK (7 << 0) 50 # define RS5C_CTRL1_CT0 (0 << 0) /* no periodic irq */ 51 # define RS5C_CTRL1_CT4 (4 << 0) /* 1 Hz level irq */ 52 #define RS5C_REG_CTRL2 15 53 # define RS5C372_CTRL2_24 (1 << 5) 54 # define RS5C_CTRL2_XSTP (1 << 4) /* only if !R2x2x */ 55 # define R2x2x_CTRL2_VDET (1 << 6) /* only if R2x2x */ 56 # define R2x2x_CTRL2_XSTP (1 << 5) /* only if R2x2x */ 57 # define R2x2x_CTRL2_PON (1 << 4) /* only if R2x2x */ 58 # define RS5C_CTRL2_CTFG (1 << 2) 59 # define RS5C_CTRL2_AAFG (1 << 1) /* or WAFG */ 60 # define RS5C_CTRL2_BAFG (1 << 0) /* or DAFG */ 61 62 63 /* to read (style 1) or write registers starting at R */ 64 #define RS5C_ADDR(R) (((R) << 4) | 0) 65 66 67 enum rtc_type { 68 rtc_undef = 0, 69 rtc_r2025sd, 70 rtc_r2221tl, 71 rtc_rs5c372a, 72 rtc_rs5c372b, 73 rtc_rv5c386, 74 rtc_rv5c387a, 75 }; 76 77 static const struct i2c_device_id rs5c372_id[] = { 78 { "r2025sd", rtc_r2025sd }, 79 { "r2221tl", rtc_r2221tl }, 80 { "rs5c372a", rtc_rs5c372a }, 81 { "rs5c372b", rtc_rs5c372b }, 82 { "rv5c386", rtc_rv5c386 }, 83 { "rv5c387a", rtc_rv5c387a }, 84 { } 85 }; 86 MODULE_DEVICE_TABLE(i2c, rs5c372_id); 87 88 static const __maybe_unused struct of_device_id rs5c372_of_match[] = { 89 { 90 .compatible = "ricoh,r2025sd", 91 .data = (void *)rtc_r2025sd 92 }, 93 { 94 .compatible = "ricoh,r2221tl", 95 .data = (void *)rtc_r2221tl 96 }, 97 { 98 .compatible = "ricoh,rs5c372a", 99 .data = (void *)rtc_rs5c372a 100 }, 101 { 102 .compatible = "ricoh,rs5c372b", 103 .data = (void *)rtc_rs5c372b 104 }, 105 { 106 .compatible = "ricoh,rv5c386", 107 .data = (void *)rtc_rv5c386 108 }, 109 { 110 .compatible = "ricoh,rv5c387a", 111 .data = (void *)rtc_rv5c387a 112 }, 113 { } 114 }; 115 MODULE_DEVICE_TABLE(of, rs5c372_of_match); 116 117 /* REVISIT: this assumes that: 118 * - we're in the 21st century, so it's safe to ignore the century 119 * bit for rv5c38[67] (REG_MONTH bit 7); 120 * - we should use ALARM_A not ALARM_B (may be wrong on some boards) 121 */ 122 struct rs5c372 { 123 struct i2c_client *client; 124 struct rtc_device *rtc; 125 enum rtc_type type; 126 unsigned time24:1; 127 unsigned has_irq:1; 128 unsigned smbus:1; 129 char buf[17]; 130 char *regs; 131 }; 132 133 static int rs5c_get_regs(struct rs5c372 *rs5c) 134 { 135 struct i2c_client *client = rs5c->client; 136 struct i2c_msg msgs[] = { 137 { 138 .addr = client->addr, 139 .flags = I2C_M_RD, 140 .len = sizeof(rs5c->buf), 141 .buf = rs5c->buf 142 }, 143 }; 144 145 /* This implements the third reading method from the datasheet, using 146 * an internal address that's reset after each transaction (by STOP) 147 * to 0x0f ... so we read extra registers, and skip the first one. 148 * 149 * The first method doesn't work with the iop3xx adapter driver, on at 150 * least 80219 chips; this works around that bug. 151 * 152 * The third method on the other hand doesn't work for the SMBus-only 153 * configurations, so we use the first method there, stripping off 154 * the extra register in the process. 155 */ 156 if (rs5c->smbus) { 157 int addr = RS5C_ADDR(RS5C372_REG_SECS); 158 int size = sizeof(rs5c->buf) - 1; 159 160 if (i2c_smbus_read_i2c_block_data(client, addr, size, 161 rs5c->buf + 1) != size) { 162 dev_warn(&client->dev, "can't read registers\n"); 163 return -EIO; 164 } 165 } else { 166 if ((i2c_transfer(client->adapter, msgs, 1)) != 1) { 167 dev_warn(&client->dev, "can't read registers\n"); 168 return -EIO; 169 } 170 } 171 172 dev_dbg(&client->dev, 173 "%3ph (%02x) %3ph (%02x), %3ph, %3ph; %02x %02x\n", 174 rs5c->regs + 0, rs5c->regs[3], 175 rs5c->regs + 4, rs5c->regs[7], 176 rs5c->regs + 8, rs5c->regs + 11, 177 rs5c->regs[14], rs5c->regs[15]); 178 179 return 0; 180 } 181 182 static unsigned rs5c_reg2hr(struct rs5c372 *rs5c, unsigned reg) 183 { 184 unsigned hour; 185 186 if (rs5c->time24) 187 return bcd2bin(reg & 0x3f); 188 189 hour = bcd2bin(reg & 0x1f); 190 if (hour == 12) 191 hour = 0; 192 if (reg & 0x20) 193 hour += 12; 194 return hour; 195 } 196 197 static unsigned rs5c_hr2reg(struct rs5c372 *rs5c, unsigned hour) 198 { 199 if (rs5c->time24) 200 return bin2bcd(hour); 201 202 if (hour > 12) 203 return 0x20 | bin2bcd(hour - 12); 204 if (hour == 12) 205 return 0x20 | bin2bcd(12); 206 if (hour == 0) 207 return bin2bcd(12); 208 return bin2bcd(hour); 209 } 210 211 static int rs5c372_rtc_read_time(struct device *dev, struct rtc_time *tm) 212 { 213 struct i2c_client *client = to_i2c_client(dev); 214 struct rs5c372 *rs5c = i2c_get_clientdata(client); 215 int status = rs5c_get_regs(rs5c); 216 unsigned char ctrl2 = rs5c->regs[RS5C_REG_CTRL2]; 217 218 if (status < 0) 219 return status; 220 221 switch (rs5c->type) { 222 case rtc_r2025sd: 223 case rtc_r2221tl: 224 if ((rs5c->type == rtc_r2025sd && !(ctrl2 & R2x2x_CTRL2_XSTP)) || 225 (rs5c->type == rtc_r2221tl && (ctrl2 & R2x2x_CTRL2_XSTP))) { 226 dev_warn(&client->dev, "rtc oscillator interruption detected. Please reset the rtc clock.\n"); 227 return -EINVAL; 228 } 229 break; 230 default: 231 if (ctrl2 & RS5C_CTRL2_XSTP) { 232 dev_warn(&client->dev, "rtc oscillator interruption detected. Please reset the rtc clock.\n"); 233 return -EINVAL; 234 } 235 } 236 237 tm->tm_sec = bcd2bin(rs5c->regs[RS5C372_REG_SECS] & 0x7f); 238 tm->tm_min = bcd2bin(rs5c->regs[RS5C372_REG_MINS] & 0x7f); 239 tm->tm_hour = rs5c_reg2hr(rs5c, rs5c->regs[RS5C372_REG_HOURS]); 240 241 tm->tm_wday = bcd2bin(rs5c->regs[RS5C372_REG_WDAY] & 0x07); 242 tm->tm_mday = bcd2bin(rs5c->regs[RS5C372_REG_DAY] & 0x3f); 243 244 /* tm->tm_mon is zero-based */ 245 tm->tm_mon = bcd2bin(rs5c->regs[RS5C372_REG_MONTH] & 0x1f) - 1; 246 247 /* year is 1900 + tm->tm_year */ 248 tm->tm_year = bcd2bin(rs5c->regs[RS5C372_REG_YEAR]) + 100; 249 250 dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " 251 "mday=%d, mon=%d, year=%d, wday=%d\n", 252 __func__, 253 tm->tm_sec, tm->tm_min, tm->tm_hour, 254 tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); 255 256 return 0; 257 } 258 259 static int rs5c372_rtc_set_time(struct device *dev, struct rtc_time *tm) 260 { 261 struct i2c_client *client = to_i2c_client(dev); 262 struct rs5c372 *rs5c = i2c_get_clientdata(client); 263 unsigned char buf[7]; 264 unsigned char ctrl2; 265 int addr; 266 267 dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d " 268 "mday=%d, mon=%d, year=%d, wday=%d\n", 269 __func__, 270 tm->tm_sec, tm->tm_min, tm->tm_hour, 271 tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); 272 273 addr = RS5C_ADDR(RS5C372_REG_SECS); 274 buf[0] = bin2bcd(tm->tm_sec); 275 buf[1] = bin2bcd(tm->tm_min); 276 buf[2] = rs5c_hr2reg(rs5c, tm->tm_hour); 277 buf[3] = bin2bcd(tm->tm_wday); 278 buf[4] = bin2bcd(tm->tm_mday); 279 buf[5] = bin2bcd(tm->tm_mon + 1); 280 buf[6] = bin2bcd(tm->tm_year - 100); 281 282 if (i2c_smbus_write_i2c_block_data(client, addr, sizeof(buf), buf) < 0) { 283 dev_dbg(&client->dev, "%s: write error in line %i\n", 284 __func__, __LINE__); 285 return -EIO; 286 } 287 288 addr = RS5C_ADDR(RS5C_REG_CTRL2); 289 ctrl2 = i2c_smbus_read_byte_data(client, addr); 290 291 /* clear rtc warning bits */ 292 switch (rs5c->type) { 293 case rtc_r2025sd: 294 case rtc_r2221tl: 295 ctrl2 &= ~(R2x2x_CTRL2_VDET | R2x2x_CTRL2_PON); 296 if (rs5c->type == rtc_r2025sd) 297 ctrl2 |= R2x2x_CTRL2_XSTP; 298 else 299 ctrl2 &= ~R2x2x_CTRL2_XSTP; 300 break; 301 default: 302 ctrl2 &= ~RS5C_CTRL2_XSTP; 303 break; 304 } 305 306 if (i2c_smbus_write_byte_data(client, addr, ctrl2) < 0) { 307 dev_dbg(&client->dev, "%s: write error in line %i\n", 308 __func__, __LINE__); 309 return -EIO; 310 } 311 312 return 0; 313 } 314 315 #if IS_ENABLED(CONFIG_RTC_INTF_PROC) 316 #define NEED_TRIM 317 #endif 318 319 #if IS_ENABLED(CONFIG_RTC_INTF_SYSFS) 320 #define NEED_TRIM 321 #endif 322 323 #ifdef NEED_TRIM 324 static int rs5c372_get_trim(struct i2c_client *client, int *osc, int *trim) 325 { 326 struct rs5c372 *rs5c372 = i2c_get_clientdata(client); 327 u8 tmp = rs5c372->regs[RS5C372_REG_TRIM]; 328 329 if (osc) { 330 if (rs5c372->type == rtc_rs5c372a || rs5c372->type == rtc_rs5c372b) 331 *osc = (tmp & RS5C372_TRIM_XSL) ? 32000 : 32768; 332 else 333 *osc = 32768; 334 } 335 336 if (trim) { 337 dev_dbg(&client->dev, "%s: raw trim=%x\n", __func__, tmp); 338 tmp &= RS5C372_TRIM_MASK; 339 if (tmp & 0x3e) { 340 int t = tmp & 0x3f; 341 342 if (tmp & 0x40) 343 t = (~t | (s8)0xc0) + 1; 344 else 345 t = t - 1; 346 347 tmp = t * 2; 348 } else 349 tmp = 0; 350 *trim = tmp; 351 } 352 353 return 0; 354 } 355 #endif 356 357 static int rs5c_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) 358 { 359 struct i2c_client *client = to_i2c_client(dev); 360 struct rs5c372 *rs5c = i2c_get_clientdata(client); 361 unsigned char buf; 362 int status, addr; 363 364 buf = rs5c->regs[RS5C_REG_CTRL1]; 365 366 if (!rs5c->has_irq) 367 return -EINVAL; 368 369 status = rs5c_get_regs(rs5c); 370 if (status < 0) 371 return status; 372 373 addr = RS5C_ADDR(RS5C_REG_CTRL1); 374 if (enabled) 375 buf |= RS5C_CTRL1_AALE; 376 else 377 buf &= ~RS5C_CTRL1_AALE; 378 379 if (i2c_smbus_write_byte_data(client, addr, buf) < 0) { 380 dev_warn(dev, "can't update alarm\n"); 381 status = -EIO; 382 } else 383 rs5c->regs[RS5C_REG_CTRL1] = buf; 384 385 return status; 386 } 387 388 389 /* NOTE: Since RTC_WKALM_{RD,SET} were originally defined for EFI, 390 * which only exposes a polled programming interface; and since 391 * these calls map directly to those EFI requests; we don't demand 392 * we have an IRQ for this chip when we go through this API. 393 * 394 * The older x86_pc derived RTC_ALM_{READ,SET} calls require irqs 395 * though, managed through RTC_AIE_{ON,OFF} requests. 396 */ 397 398 static int rs5c_read_alarm(struct device *dev, struct rtc_wkalrm *t) 399 { 400 struct i2c_client *client = to_i2c_client(dev); 401 struct rs5c372 *rs5c = i2c_get_clientdata(client); 402 int status; 403 404 status = rs5c_get_regs(rs5c); 405 if (status < 0) 406 return status; 407 408 /* report alarm time */ 409 t->time.tm_sec = 0; 410 t->time.tm_min = bcd2bin(rs5c->regs[RS5C_REG_ALARM_A_MIN] & 0x7f); 411 t->time.tm_hour = rs5c_reg2hr(rs5c, rs5c->regs[RS5C_REG_ALARM_A_HOURS]); 412 413 /* ... and status */ 414 t->enabled = !!(rs5c->regs[RS5C_REG_CTRL1] & RS5C_CTRL1_AALE); 415 t->pending = !!(rs5c->regs[RS5C_REG_CTRL2] & RS5C_CTRL2_AAFG); 416 417 return 0; 418 } 419 420 static int rs5c_set_alarm(struct device *dev, struct rtc_wkalrm *t) 421 { 422 struct i2c_client *client = to_i2c_client(dev); 423 struct rs5c372 *rs5c = i2c_get_clientdata(client); 424 int status, addr, i; 425 unsigned char buf[3]; 426 427 /* only handle up to 24 hours in the future, like RTC_ALM_SET */ 428 if (t->time.tm_mday != -1 429 || t->time.tm_mon != -1 430 || t->time.tm_year != -1) 431 return -EINVAL; 432 433 /* REVISIT: round up tm_sec */ 434 435 /* if needed, disable irq (clears pending status) */ 436 status = rs5c_get_regs(rs5c); 437 if (status < 0) 438 return status; 439 if (rs5c->regs[RS5C_REG_CTRL1] & RS5C_CTRL1_AALE) { 440 addr = RS5C_ADDR(RS5C_REG_CTRL1); 441 buf[0] = rs5c->regs[RS5C_REG_CTRL1] & ~RS5C_CTRL1_AALE; 442 if (i2c_smbus_write_byte_data(client, addr, buf[0]) < 0) { 443 dev_dbg(dev, "can't disable alarm\n"); 444 return -EIO; 445 } 446 rs5c->regs[RS5C_REG_CTRL1] = buf[0]; 447 } 448 449 /* set alarm */ 450 buf[0] = bin2bcd(t->time.tm_min); 451 buf[1] = rs5c_hr2reg(rs5c, t->time.tm_hour); 452 buf[2] = 0x7f; /* any/all days */ 453 454 for (i = 0; i < sizeof(buf); i++) { 455 addr = RS5C_ADDR(RS5C_REG_ALARM_A_MIN + i); 456 if (i2c_smbus_write_byte_data(client, addr, buf[i]) < 0) { 457 dev_dbg(dev, "can't set alarm time\n"); 458 return -EIO; 459 } 460 } 461 462 /* ... and maybe enable its irq */ 463 if (t->enabled) { 464 addr = RS5C_ADDR(RS5C_REG_CTRL1); 465 buf[0] = rs5c->regs[RS5C_REG_CTRL1] | RS5C_CTRL1_AALE; 466 if (i2c_smbus_write_byte_data(client, addr, buf[0]) < 0) 467 dev_warn(dev, "can't enable alarm\n"); 468 rs5c->regs[RS5C_REG_CTRL1] = buf[0]; 469 } 470 471 return 0; 472 } 473 474 #if IS_ENABLED(CONFIG_RTC_INTF_PROC) 475 476 static int rs5c372_rtc_proc(struct device *dev, struct seq_file *seq) 477 { 478 int err, osc, trim; 479 480 err = rs5c372_get_trim(to_i2c_client(dev), &osc, &trim); 481 if (err == 0) { 482 seq_printf(seq, "crystal\t\t: %d.%03d KHz\n", 483 osc / 1000, osc % 1000); 484 seq_printf(seq, "trim\t\t: %d\n", trim); 485 } 486 487 return 0; 488 } 489 490 #else 491 #define rs5c372_rtc_proc NULL 492 #endif 493 494 #ifdef CONFIG_RTC_INTF_DEV 495 static int rs5c372_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) 496 { 497 struct rs5c372 *rs5c = i2c_get_clientdata(to_i2c_client(dev)); 498 unsigned char ctrl2; 499 int addr; 500 unsigned int flags; 501 502 dev_dbg(dev, "%s: cmd=%x\n", __func__, cmd); 503 504 addr = RS5C_ADDR(RS5C_REG_CTRL2); 505 ctrl2 = i2c_smbus_read_byte_data(rs5c->client, addr); 506 507 switch (cmd) { 508 case RTC_VL_READ: 509 flags = 0; 510 511 switch (rs5c->type) { 512 case rtc_r2025sd: 513 case rtc_r2221tl: 514 if ((rs5c->type == rtc_r2025sd && !(ctrl2 & R2x2x_CTRL2_XSTP)) || 515 (rs5c->type == rtc_r2221tl && (ctrl2 & R2x2x_CTRL2_XSTP))) { 516 flags |= RTC_VL_DATA_INVALID; 517 } 518 if (ctrl2 & R2x2x_CTRL2_VDET) 519 flags |= RTC_VL_BACKUP_LOW; 520 break; 521 default: 522 if (ctrl2 & RS5C_CTRL2_XSTP) 523 flags |= RTC_VL_DATA_INVALID; 524 break; 525 } 526 527 return put_user(flags, (unsigned int __user *)arg); 528 case RTC_VL_CLR: 529 /* clear VDET bit */ 530 if (rs5c->type == rtc_r2025sd || rs5c->type == rtc_r2221tl) { 531 ctrl2 &= ~R2x2x_CTRL2_VDET; 532 if (i2c_smbus_write_byte_data(rs5c->client, addr, ctrl2) < 0) { 533 dev_dbg(&rs5c->client->dev, "%s: write error in line %i\n", 534 __func__, __LINE__); 535 return -EIO; 536 } 537 } 538 return 0; 539 default: 540 return -ENOIOCTLCMD; 541 } 542 return 0; 543 } 544 #else 545 #define rs5c372_ioctl NULL 546 #endif 547 548 static int rs5c372_read_offset(struct device *dev, long *offset) 549 { 550 struct rs5c372 *rs5c = i2c_get_clientdata(to_i2c_client(dev)); 551 u8 val = rs5c->regs[RS5C372_REG_TRIM]; 552 long ppb_per_step = 0; 553 bool decr = val & RS5C372_TRIM_DECR; 554 555 switch (rs5c->type) { 556 case rtc_r2221tl: 557 ppb_per_step = val & R2221TL_TRIM_DEV ? 1017 : 3051; 558 break; 559 case rtc_rs5c372a: 560 case rtc_rs5c372b: 561 ppb_per_step = val & RS5C372_TRIM_XSL ? 3125 : 3051; 562 break; 563 default: 564 ppb_per_step = 3051; 565 break; 566 } 567 568 /* Only bits[0:5] repsents the time counts */ 569 val &= 0x3F; 570 571 /* If bits[1:5] are all 0, it means no increment or decrement */ 572 if (!(val & 0x3E)) { 573 *offset = 0; 574 } else { 575 if (decr) 576 *offset = -(((~val) & 0x3F) + 1) * ppb_per_step; 577 else 578 *offset = (val - 1) * ppb_per_step; 579 } 580 581 return 0; 582 } 583 584 static int rs5c372_set_offset(struct device *dev, long offset) 585 { 586 struct rs5c372 *rs5c = i2c_get_clientdata(to_i2c_client(dev)); 587 int addr = RS5C_ADDR(RS5C372_REG_TRIM); 588 u8 val = 0; 589 u8 tmp = 0; 590 long ppb_per_step = 3051; 591 long steps = LONG_MIN; 592 593 switch (rs5c->type) { 594 case rtc_rs5c372a: 595 case rtc_rs5c372b: 596 tmp = rs5c->regs[RS5C372_REG_TRIM]; 597 if (tmp & RS5C372_TRIM_XSL) { 598 ppb_per_step = 3125; 599 val |= RS5C372_TRIM_XSL; 600 } 601 break; 602 case rtc_r2221tl: 603 /* 604 * Check if it is possible to use high resolution mode (DEV=1). 605 * In this mode, the minimum resolution is 2 / (32768 * 20 * 3), 606 * which is about 1017 ppb. 607 */ 608 steps = DIV_ROUND_CLOSEST(offset, 1017); 609 if (steps >= -0x3E && steps <= 0x3E) { 610 ppb_per_step = 1017; 611 val |= R2221TL_TRIM_DEV; 612 } else { 613 /* 614 * offset is out of the range of high resolution mode. 615 * Try to use low resolution mode (DEV=0). In this mode, 616 * the minimum resolution is 2 / (32768 * 20), which is 617 * about 3051 ppb. 618 */ 619 steps = LONG_MIN; 620 } 621 break; 622 default: 623 break; 624 } 625 626 if (steps == LONG_MIN) { 627 steps = DIV_ROUND_CLOSEST(offset, ppb_per_step); 628 if (steps > 0x3E || steps < -0x3E) 629 return -ERANGE; 630 } 631 632 if (steps > 0) { 633 val |= steps + 1; 634 } else { 635 val |= RS5C372_TRIM_DECR; 636 val |= (~(-steps - 1)) & 0x3F; 637 } 638 639 if (!steps || !(val & 0x3E)) { 640 /* 641 * if offset is too small, set oscillation adjustment register 642 * or time trimming register with its default value whic means 643 * no increment or decrement. But for rs5c372[a|b], the XSL bit 644 * should be kept unchanged. 645 */ 646 if (rs5c->type == rtc_rs5c372a || rs5c->type == rtc_rs5c372b) 647 val &= RS5C372_TRIM_XSL; 648 else 649 val = 0; 650 } 651 652 dev_dbg(&rs5c->client->dev, "write 0x%x for offset %ld\n", val, offset); 653 654 if (i2c_smbus_write_byte_data(rs5c->client, addr, val) < 0) { 655 dev_err(&rs5c->client->dev, "failed to write 0x%x to reg %d\n", val, addr); 656 return -EIO; 657 } 658 659 rs5c->regs[RS5C372_REG_TRIM] = val; 660 661 return 0; 662 } 663 664 static const struct rtc_class_ops rs5c372_rtc_ops = { 665 .proc = rs5c372_rtc_proc, 666 .read_time = rs5c372_rtc_read_time, 667 .set_time = rs5c372_rtc_set_time, 668 .read_alarm = rs5c_read_alarm, 669 .set_alarm = rs5c_set_alarm, 670 .alarm_irq_enable = rs5c_rtc_alarm_irq_enable, 671 .ioctl = rs5c372_ioctl, 672 .read_offset = rs5c372_read_offset, 673 .set_offset = rs5c372_set_offset, 674 }; 675 676 #if IS_ENABLED(CONFIG_RTC_INTF_SYSFS) 677 678 static ssize_t rs5c372_sysfs_show_trim(struct device *dev, 679 struct device_attribute *attr, char *buf) 680 { 681 int err, trim; 682 683 err = rs5c372_get_trim(to_i2c_client(dev), NULL, &trim); 684 if (err) 685 return err; 686 687 return sprintf(buf, "%d\n", trim); 688 } 689 static DEVICE_ATTR(trim, S_IRUGO, rs5c372_sysfs_show_trim, NULL); 690 691 static ssize_t rs5c372_sysfs_show_osc(struct device *dev, 692 struct device_attribute *attr, char *buf) 693 { 694 int err, osc; 695 696 err = rs5c372_get_trim(to_i2c_client(dev), &osc, NULL); 697 if (err) 698 return err; 699 700 return sprintf(buf, "%d.%03d KHz\n", osc / 1000, osc % 1000); 701 } 702 static DEVICE_ATTR(osc, S_IRUGO, rs5c372_sysfs_show_osc, NULL); 703 704 static int rs5c_sysfs_register(struct device *dev) 705 { 706 int err; 707 708 err = device_create_file(dev, &dev_attr_trim); 709 if (err) 710 return err; 711 err = device_create_file(dev, &dev_attr_osc); 712 if (err) 713 device_remove_file(dev, &dev_attr_trim); 714 715 return err; 716 } 717 718 static void rs5c_sysfs_unregister(struct device *dev) 719 { 720 device_remove_file(dev, &dev_attr_trim); 721 device_remove_file(dev, &dev_attr_osc); 722 } 723 724 #else 725 static int rs5c_sysfs_register(struct device *dev) 726 { 727 return 0; 728 } 729 730 static void rs5c_sysfs_unregister(struct device *dev) 731 { 732 /* nothing */ 733 } 734 #endif /* SYSFS */ 735 736 static struct i2c_driver rs5c372_driver; 737 738 static int rs5c_oscillator_setup(struct rs5c372 *rs5c372) 739 { 740 unsigned char buf[2]; 741 int addr, i, ret = 0; 742 743 addr = RS5C_ADDR(RS5C_REG_CTRL1); 744 buf[0] = rs5c372->regs[RS5C_REG_CTRL1]; 745 buf[1] = rs5c372->regs[RS5C_REG_CTRL2]; 746 747 switch (rs5c372->type) { 748 case rtc_r2025sd: 749 if (buf[1] & R2x2x_CTRL2_XSTP) 750 return ret; 751 break; 752 case rtc_r2221tl: 753 if (!(buf[1] & R2x2x_CTRL2_XSTP)) 754 return ret; 755 break; 756 default: 757 if (!(buf[1] & RS5C_CTRL2_XSTP)) 758 return ret; 759 break; 760 } 761 762 /* use 24hr mode */ 763 switch (rs5c372->type) { 764 case rtc_rs5c372a: 765 case rtc_rs5c372b: 766 buf[1] |= RS5C372_CTRL2_24; 767 rs5c372->time24 = 1; 768 break; 769 case rtc_r2025sd: 770 case rtc_r2221tl: 771 case rtc_rv5c386: 772 case rtc_rv5c387a: 773 buf[0] |= RV5C387_CTRL1_24; 774 rs5c372->time24 = 1; 775 break; 776 default: 777 /* impossible */ 778 break; 779 } 780 781 for (i = 0; i < sizeof(buf); i++) { 782 addr = RS5C_ADDR(RS5C_REG_CTRL1 + i); 783 ret = i2c_smbus_write_byte_data(rs5c372->client, addr, buf[i]); 784 if (unlikely(ret < 0)) 785 return ret; 786 } 787 788 rs5c372->regs[RS5C_REG_CTRL1] = buf[0]; 789 rs5c372->regs[RS5C_REG_CTRL2] = buf[1]; 790 791 return 0; 792 } 793 794 static int rs5c372_probe(struct i2c_client *client) 795 { 796 int err = 0; 797 int smbus_mode = 0; 798 struct rs5c372 *rs5c372; 799 800 dev_dbg(&client->dev, "%s\n", __func__); 801 802 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C | 803 I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_I2C_BLOCK)) { 804 /* 805 * If we don't have any master mode adapter, try breaking 806 * it down in to the barest of capabilities. 807 */ 808 if (i2c_check_functionality(client->adapter, 809 I2C_FUNC_SMBUS_BYTE_DATA | 810 I2C_FUNC_SMBUS_I2C_BLOCK)) 811 smbus_mode = 1; 812 else { 813 /* Still no good, give up */ 814 err = -ENODEV; 815 goto exit; 816 } 817 } 818 819 rs5c372 = devm_kzalloc(&client->dev, sizeof(struct rs5c372), 820 GFP_KERNEL); 821 if (!rs5c372) { 822 err = -ENOMEM; 823 goto exit; 824 } 825 826 rs5c372->client = client; 827 i2c_set_clientdata(client, rs5c372); 828 if (client->dev.of_node) { 829 rs5c372->type = (enum rtc_type) 830 of_device_get_match_data(&client->dev); 831 } else { 832 const struct i2c_device_id *id = i2c_match_id(rs5c372_id, client); 833 rs5c372->type = id->driver_data; 834 } 835 836 /* we read registers 0x0f then 0x00-0x0f; skip the first one */ 837 rs5c372->regs = &rs5c372->buf[1]; 838 rs5c372->smbus = smbus_mode; 839 840 err = rs5c_get_regs(rs5c372); 841 if (err < 0) 842 goto exit; 843 844 /* clock may be set for am/pm or 24 hr time */ 845 switch (rs5c372->type) { 846 case rtc_rs5c372a: 847 case rtc_rs5c372b: 848 /* alarm uses ALARM_A; and nINTRA on 372a, nINTR on 372b. 849 * so does periodic irq, except some 327a modes. 850 */ 851 if (rs5c372->regs[RS5C_REG_CTRL2] & RS5C372_CTRL2_24) 852 rs5c372->time24 = 1; 853 break; 854 case rtc_r2025sd: 855 case rtc_r2221tl: 856 case rtc_rv5c386: 857 case rtc_rv5c387a: 858 if (rs5c372->regs[RS5C_REG_CTRL1] & RV5C387_CTRL1_24) 859 rs5c372->time24 = 1; 860 /* alarm uses ALARM_W; and nINTRB for alarm and periodic 861 * irq, on both 386 and 387 862 */ 863 break; 864 default: 865 dev_err(&client->dev, "unknown RTC type\n"); 866 goto exit; 867 } 868 869 /* if the oscillator lost power and no other software (like 870 * the bootloader) set it up, do it here. 871 * 872 * The R2025S/D does this a little differently than the other 873 * parts, so we special case that.. 874 */ 875 err = rs5c_oscillator_setup(rs5c372); 876 if (unlikely(err < 0)) { 877 dev_err(&client->dev, "setup error\n"); 878 goto exit; 879 } 880 881 dev_info(&client->dev, "%s found, %s\n", 882 ({ char *s; switch (rs5c372->type) { 883 case rtc_r2025sd: s = "r2025sd"; break; 884 case rtc_r2221tl: s = "r2221tl"; break; 885 case rtc_rs5c372a: s = "rs5c372a"; break; 886 case rtc_rs5c372b: s = "rs5c372b"; break; 887 case rtc_rv5c386: s = "rv5c386"; break; 888 case rtc_rv5c387a: s = "rv5c387a"; break; 889 default: s = "chip"; break; 890 }; s;}), 891 rs5c372->time24 ? "24hr" : "am/pm" 892 ); 893 894 /* REVISIT use client->irq to register alarm irq ... */ 895 rs5c372->rtc = devm_rtc_device_register(&client->dev, 896 rs5c372_driver.driver.name, 897 &rs5c372_rtc_ops, THIS_MODULE); 898 899 if (IS_ERR(rs5c372->rtc)) { 900 err = PTR_ERR(rs5c372->rtc); 901 goto exit; 902 } 903 904 err = rs5c_sysfs_register(&client->dev); 905 if (err) 906 goto exit; 907 908 return 0; 909 910 exit: 911 return err; 912 } 913 914 static void rs5c372_remove(struct i2c_client *client) 915 { 916 rs5c_sysfs_unregister(&client->dev); 917 } 918 919 static struct i2c_driver rs5c372_driver = { 920 .driver = { 921 .name = "rtc-rs5c372", 922 .of_match_table = of_match_ptr(rs5c372_of_match), 923 }, 924 .probe = rs5c372_probe, 925 .remove = rs5c372_remove, 926 .id_table = rs5c372_id, 927 }; 928 929 module_i2c_driver(rs5c372_driver); 930 931 MODULE_AUTHOR( 932 "Pavel Mironchik <pmironchik@optifacio.net>, " 933 "Alessandro Zummo <a.zummo@towertech.it>, " 934 "Paul Mundt <lethal@linux-sh.org>"); 935 MODULE_DESCRIPTION("Ricoh RS5C372 RTC driver"); 936 MODULE_LICENSE("GPL"); 937