1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * An I2C driver for Ricoh RS5C372, R2025S/D and RV5C38[67] RTCs 4 * 5 * Copyright (C) 2005 Pavel Mironchik <pmironchik@optifacio.net> 6 * Copyright (C) 2006 Tower Technologies 7 * Copyright (C) 2008 Paul Mundt 8 */ 9 10 #include <linux/i2c.h> 11 #include <linux/rtc.h> 12 #include <linux/bcd.h> 13 #include <linux/slab.h> 14 #include <linux/module.h> 15 #include <linux/of_device.h> 16 17 /* 18 * Ricoh has a family of I2C based RTCs, which differ only slightly from 19 * each other. Differences center on pinout (e.g. how many interrupts, 20 * output clock, etc) and how the control registers are used. The '372 21 * is significant only because that's the one this driver first supported. 22 */ 23 #define RS5C372_REG_SECS 0 24 #define RS5C372_REG_MINS 1 25 #define RS5C372_REG_HOURS 2 26 #define RS5C372_REG_WDAY 3 27 #define RS5C372_REG_DAY 4 28 #define RS5C372_REG_MONTH 5 29 #define RS5C372_REG_YEAR 6 30 #define RS5C372_REG_TRIM 7 31 # define RS5C372_TRIM_XSL 0x80 32 # define RS5C372_TRIM_MASK 0x7F 33 34 #define RS5C_REG_ALARM_A_MIN 8 /* or ALARM_W */ 35 #define RS5C_REG_ALARM_A_HOURS 9 36 #define RS5C_REG_ALARM_A_WDAY 10 37 38 #define RS5C_REG_ALARM_B_MIN 11 /* or ALARM_D */ 39 #define RS5C_REG_ALARM_B_HOURS 12 40 #define RS5C_REG_ALARM_B_WDAY 13 /* (ALARM_B only) */ 41 42 #define RS5C_REG_CTRL1 14 43 # define RS5C_CTRL1_AALE (1 << 7) /* or WALE */ 44 # define RS5C_CTRL1_BALE (1 << 6) /* or DALE */ 45 # define RV5C387_CTRL1_24 (1 << 5) 46 # define RS5C372A_CTRL1_SL1 (1 << 5) 47 # define RS5C_CTRL1_CT_MASK (7 << 0) 48 # define RS5C_CTRL1_CT0 (0 << 0) /* no periodic irq */ 49 # define RS5C_CTRL1_CT4 (4 << 0) /* 1 Hz level irq */ 50 #define RS5C_REG_CTRL2 15 51 # define RS5C372_CTRL2_24 (1 << 5) 52 # define RS5C_CTRL2_XSTP (1 << 4) /* only if !R2x2x */ 53 # define R2x2x_CTRL2_VDET (1 << 6) /* only if R2x2x */ 54 # define R2x2x_CTRL2_XSTP (1 << 5) /* only if R2x2x */ 55 # define R2x2x_CTRL2_PON (1 << 4) /* only if R2x2x */ 56 # define RS5C_CTRL2_CTFG (1 << 2) 57 # define RS5C_CTRL2_AAFG (1 << 1) /* or WAFG */ 58 # define RS5C_CTRL2_BAFG (1 << 0) /* or DAFG */ 59 60 61 /* to read (style 1) or write registers starting at R */ 62 #define RS5C_ADDR(R) (((R) << 4) | 0) 63 64 65 enum rtc_type { 66 rtc_undef = 0, 67 rtc_r2025sd, 68 rtc_r2221tl, 69 rtc_rs5c372a, 70 rtc_rs5c372b, 71 rtc_rv5c386, 72 rtc_rv5c387a, 73 }; 74 75 static const struct i2c_device_id rs5c372_id[] = { 76 { "r2025sd", rtc_r2025sd }, 77 { "r2221tl", rtc_r2221tl }, 78 { "rs5c372a", rtc_rs5c372a }, 79 { "rs5c372b", rtc_rs5c372b }, 80 { "rv5c386", rtc_rv5c386 }, 81 { "rv5c387a", rtc_rv5c387a }, 82 { } 83 }; 84 MODULE_DEVICE_TABLE(i2c, rs5c372_id); 85 86 static const struct of_device_id rs5c372_of_match[] = { 87 { 88 .compatible = "ricoh,r2025sd", 89 .data = (void *)rtc_r2025sd 90 }, 91 { 92 .compatible = "ricoh,r2221tl", 93 .data = (void *)rtc_r2221tl 94 }, 95 { 96 .compatible = "ricoh,rs5c372a", 97 .data = (void *)rtc_rs5c372a 98 }, 99 { 100 .compatible = "ricoh,rs5c372b", 101 .data = (void *)rtc_rs5c372b 102 }, 103 { 104 .compatible = "ricoh,rv5c386", 105 .data = (void *)rtc_rv5c386 106 }, 107 { 108 .compatible = "ricoh,rv5c387a", 109 .data = (void *)rtc_rv5c387a 110 }, 111 { } 112 }; 113 MODULE_DEVICE_TABLE(of, rs5c372_of_match); 114 115 /* REVISIT: this assumes that: 116 * - we're in the 21st century, so it's safe to ignore the century 117 * bit for rv5c38[67] (REG_MONTH bit 7); 118 * - we should use ALARM_A not ALARM_B (may be wrong on some boards) 119 */ 120 struct rs5c372 { 121 struct i2c_client *client; 122 struct rtc_device *rtc; 123 enum rtc_type type; 124 unsigned time24:1; 125 unsigned has_irq:1; 126 unsigned smbus:1; 127 char buf[17]; 128 char *regs; 129 }; 130 131 static int rs5c_get_regs(struct rs5c372 *rs5c) 132 { 133 struct i2c_client *client = rs5c->client; 134 struct i2c_msg msgs[] = { 135 { 136 .addr = client->addr, 137 .flags = I2C_M_RD, 138 .len = sizeof(rs5c->buf), 139 .buf = rs5c->buf 140 }, 141 }; 142 143 /* This implements the third reading method from the datasheet, using 144 * an internal address that's reset after each transaction (by STOP) 145 * to 0x0f ... so we read extra registers, and skip the first one. 146 * 147 * The first method doesn't work with the iop3xx adapter driver, on at 148 * least 80219 chips; this works around that bug. 149 * 150 * The third method on the other hand doesn't work for the SMBus-only 151 * configurations, so we use the the first method there, stripping off 152 * the extra register in the process. 153 */ 154 if (rs5c->smbus) { 155 int addr = RS5C_ADDR(RS5C372_REG_SECS); 156 int size = sizeof(rs5c->buf) - 1; 157 158 if (i2c_smbus_read_i2c_block_data(client, addr, size, 159 rs5c->buf + 1) != size) { 160 dev_warn(&client->dev, "can't read registers\n"); 161 return -EIO; 162 } 163 } else { 164 if ((i2c_transfer(client->adapter, msgs, 1)) != 1) { 165 dev_warn(&client->dev, "can't read registers\n"); 166 return -EIO; 167 } 168 } 169 170 dev_dbg(&client->dev, 171 "%3ph (%02x) %3ph (%02x), %3ph, %3ph; %02x %02x\n", 172 rs5c->regs + 0, rs5c->regs[3], 173 rs5c->regs + 4, rs5c->regs[7], 174 rs5c->regs + 8, rs5c->regs + 11, 175 rs5c->regs[14], rs5c->regs[15]); 176 177 return 0; 178 } 179 180 static unsigned rs5c_reg2hr(struct rs5c372 *rs5c, unsigned reg) 181 { 182 unsigned hour; 183 184 if (rs5c->time24) 185 return bcd2bin(reg & 0x3f); 186 187 hour = bcd2bin(reg & 0x1f); 188 if (hour == 12) 189 hour = 0; 190 if (reg & 0x20) 191 hour += 12; 192 return hour; 193 } 194 195 static unsigned rs5c_hr2reg(struct rs5c372 *rs5c, unsigned hour) 196 { 197 if (rs5c->time24) 198 return bin2bcd(hour); 199 200 if (hour > 12) 201 return 0x20 | bin2bcd(hour - 12); 202 if (hour == 12) 203 return 0x20 | bin2bcd(12); 204 if (hour == 0) 205 return bin2bcd(12); 206 return bin2bcd(hour); 207 } 208 209 static int rs5c372_rtc_read_time(struct device *dev, struct rtc_time *tm) 210 { 211 struct i2c_client *client = to_i2c_client(dev); 212 struct rs5c372 *rs5c = i2c_get_clientdata(client); 213 int status = rs5c_get_regs(rs5c); 214 unsigned char ctrl2 = rs5c->regs[RS5C_REG_CTRL2]; 215 216 if (status < 0) 217 return status; 218 219 switch (rs5c->type) { 220 case rtc_r2025sd: 221 case rtc_r2221tl: 222 if ((rs5c->type == rtc_r2025sd && !(ctrl2 & R2x2x_CTRL2_XSTP)) || 223 (rs5c->type == rtc_r2221tl && (ctrl2 & R2x2x_CTRL2_XSTP))) { 224 dev_warn(&client->dev, "rtc oscillator interruption detected. Please reset the rtc clock.\n"); 225 return -EINVAL; 226 } 227 break; 228 default: 229 if (ctrl2 & RS5C_CTRL2_XSTP) { 230 dev_warn(&client->dev, "rtc oscillator interruption detected. Please reset the rtc clock.\n"); 231 return -EINVAL; 232 } 233 } 234 235 tm->tm_sec = bcd2bin(rs5c->regs[RS5C372_REG_SECS] & 0x7f); 236 tm->tm_min = bcd2bin(rs5c->regs[RS5C372_REG_MINS] & 0x7f); 237 tm->tm_hour = rs5c_reg2hr(rs5c, rs5c->regs[RS5C372_REG_HOURS]); 238 239 tm->tm_wday = bcd2bin(rs5c->regs[RS5C372_REG_WDAY] & 0x07); 240 tm->tm_mday = bcd2bin(rs5c->regs[RS5C372_REG_DAY] & 0x3f); 241 242 /* tm->tm_mon is zero-based */ 243 tm->tm_mon = bcd2bin(rs5c->regs[RS5C372_REG_MONTH] & 0x1f) - 1; 244 245 /* year is 1900 + tm->tm_year */ 246 tm->tm_year = bcd2bin(rs5c->regs[RS5C372_REG_YEAR]) + 100; 247 248 dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " 249 "mday=%d, mon=%d, year=%d, wday=%d\n", 250 __func__, 251 tm->tm_sec, tm->tm_min, tm->tm_hour, 252 tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); 253 254 return 0; 255 } 256 257 static int rs5c372_rtc_set_time(struct device *dev, struct rtc_time *tm) 258 { 259 struct i2c_client *client = to_i2c_client(dev); 260 struct rs5c372 *rs5c = i2c_get_clientdata(client); 261 unsigned char buf[7]; 262 unsigned char ctrl2; 263 int addr; 264 265 dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d " 266 "mday=%d, mon=%d, year=%d, wday=%d\n", 267 __func__, 268 tm->tm_sec, tm->tm_min, tm->tm_hour, 269 tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); 270 271 addr = RS5C_ADDR(RS5C372_REG_SECS); 272 buf[0] = bin2bcd(tm->tm_sec); 273 buf[1] = bin2bcd(tm->tm_min); 274 buf[2] = rs5c_hr2reg(rs5c, tm->tm_hour); 275 buf[3] = bin2bcd(tm->tm_wday); 276 buf[4] = bin2bcd(tm->tm_mday); 277 buf[5] = bin2bcd(tm->tm_mon + 1); 278 buf[6] = bin2bcd(tm->tm_year - 100); 279 280 if (i2c_smbus_write_i2c_block_data(client, addr, sizeof(buf), buf) < 0) { 281 dev_dbg(&client->dev, "%s: write error in line %i\n", 282 __func__, __LINE__); 283 return -EIO; 284 } 285 286 addr = RS5C_ADDR(RS5C_REG_CTRL2); 287 ctrl2 = i2c_smbus_read_byte_data(client, addr); 288 289 /* clear rtc warning bits */ 290 switch (rs5c->type) { 291 case rtc_r2025sd: 292 case rtc_r2221tl: 293 ctrl2 &= ~(R2x2x_CTRL2_VDET | R2x2x_CTRL2_PON); 294 if (rs5c->type == rtc_r2025sd) 295 ctrl2 |= R2x2x_CTRL2_XSTP; 296 else 297 ctrl2 &= ~R2x2x_CTRL2_XSTP; 298 break; 299 default: 300 ctrl2 &= ~RS5C_CTRL2_XSTP; 301 break; 302 } 303 304 if (i2c_smbus_write_byte_data(client, addr, ctrl2) < 0) { 305 dev_dbg(&client->dev, "%s: write error in line %i\n", 306 __func__, __LINE__); 307 return -EIO; 308 } 309 310 return 0; 311 } 312 313 #if IS_ENABLED(CONFIG_RTC_INTF_PROC) 314 #define NEED_TRIM 315 #endif 316 317 #if IS_ENABLED(CONFIG_RTC_INTF_SYSFS) 318 #define NEED_TRIM 319 #endif 320 321 #ifdef NEED_TRIM 322 static int rs5c372_get_trim(struct i2c_client *client, int *osc, int *trim) 323 { 324 struct rs5c372 *rs5c372 = i2c_get_clientdata(client); 325 u8 tmp = rs5c372->regs[RS5C372_REG_TRIM]; 326 327 if (osc) 328 *osc = (tmp & RS5C372_TRIM_XSL) ? 32000 : 32768; 329 330 if (trim) { 331 dev_dbg(&client->dev, "%s: raw trim=%x\n", __func__, tmp); 332 tmp &= RS5C372_TRIM_MASK; 333 if (tmp & 0x3e) { 334 int t = tmp & 0x3f; 335 336 if (tmp & 0x40) 337 t = (~t | (s8)0xc0) + 1; 338 else 339 t = t - 1; 340 341 tmp = t * 2; 342 } else 343 tmp = 0; 344 *trim = tmp; 345 } 346 347 return 0; 348 } 349 #endif 350 351 static int rs5c_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) 352 { 353 struct i2c_client *client = to_i2c_client(dev); 354 struct rs5c372 *rs5c = i2c_get_clientdata(client); 355 unsigned char buf; 356 int status, addr; 357 358 buf = rs5c->regs[RS5C_REG_CTRL1]; 359 360 if (!rs5c->has_irq) 361 return -EINVAL; 362 363 status = rs5c_get_regs(rs5c); 364 if (status < 0) 365 return status; 366 367 addr = RS5C_ADDR(RS5C_REG_CTRL1); 368 if (enabled) 369 buf |= RS5C_CTRL1_AALE; 370 else 371 buf &= ~RS5C_CTRL1_AALE; 372 373 if (i2c_smbus_write_byte_data(client, addr, buf) < 0) { 374 dev_warn(dev, "can't update alarm\n"); 375 status = -EIO; 376 } else 377 rs5c->regs[RS5C_REG_CTRL1] = buf; 378 379 return status; 380 } 381 382 383 /* NOTE: Since RTC_WKALM_{RD,SET} were originally defined for EFI, 384 * which only exposes a polled programming interface; and since 385 * these calls map directly to those EFI requests; we don't demand 386 * we have an IRQ for this chip when we go through this API. 387 * 388 * The older x86_pc derived RTC_ALM_{READ,SET} calls require irqs 389 * though, managed through RTC_AIE_{ON,OFF} requests. 390 */ 391 392 static int rs5c_read_alarm(struct device *dev, struct rtc_wkalrm *t) 393 { 394 struct i2c_client *client = to_i2c_client(dev); 395 struct rs5c372 *rs5c = i2c_get_clientdata(client); 396 int status; 397 398 status = rs5c_get_regs(rs5c); 399 if (status < 0) 400 return status; 401 402 /* report alarm time */ 403 t->time.tm_sec = 0; 404 t->time.tm_min = bcd2bin(rs5c->regs[RS5C_REG_ALARM_A_MIN] & 0x7f); 405 t->time.tm_hour = rs5c_reg2hr(rs5c, rs5c->regs[RS5C_REG_ALARM_A_HOURS]); 406 407 /* ... and status */ 408 t->enabled = !!(rs5c->regs[RS5C_REG_CTRL1] & RS5C_CTRL1_AALE); 409 t->pending = !!(rs5c->regs[RS5C_REG_CTRL2] & RS5C_CTRL2_AAFG); 410 411 return 0; 412 } 413 414 static int rs5c_set_alarm(struct device *dev, struct rtc_wkalrm *t) 415 { 416 struct i2c_client *client = to_i2c_client(dev); 417 struct rs5c372 *rs5c = i2c_get_clientdata(client); 418 int status, addr, i; 419 unsigned char buf[3]; 420 421 /* only handle up to 24 hours in the future, like RTC_ALM_SET */ 422 if (t->time.tm_mday != -1 423 || t->time.tm_mon != -1 424 || t->time.tm_year != -1) 425 return -EINVAL; 426 427 /* REVISIT: round up tm_sec */ 428 429 /* if needed, disable irq (clears pending status) */ 430 status = rs5c_get_regs(rs5c); 431 if (status < 0) 432 return status; 433 if (rs5c->regs[RS5C_REG_CTRL1] & RS5C_CTRL1_AALE) { 434 addr = RS5C_ADDR(RS5C_REG_CTRL1); 435 buf[0] = rs5c->regs[RS5C_REG_CTRL1] & ~RS5C_CTRL1_AALE; 436 if (i2c_smbus_write_byte_data(client, addr, buf[0]) < 0) { 437 dev_dbg(dev, "can't disable alarm\n"); 438 return -EIO; 439 } 440 rs5c->regs[RS5C_REG_CTRL1] = buf[0]; 441 } 442 443 /* set alarm */ 444 buf[0] = bin2bcd(t->time.tm_min); 445 buf[1] = rs5c_hr2reg(rs5c, t->time.tm_hour); 446 buf[2] = 0x7f; /* any/all days */ 447 448 for (i = 0; i < sizeof(buf); i++) { 449 addr = RS5C_ADDR(RS5C_REG_ALARM_A_MIN + i); 450 if (i2c_smbus_write_byte_data(client, addr, buf[i]) < 0) { 451 dev_dbg(dev, "can't set alarm time\n"); 452 return -EIO; 453 } 454 } 455 456 /* ... and maybe enable its irq */ 457 if (t->enabled) { 458 addr = RS5C_ADDR(RS5C_REG_CTRL1); 459 buf[0] = rs5c->regs[RS5C_REG_CTRL1] | RS5C_CTRL1_AALE; 460 if (i2c_smbus_write_byte_data(client, addr, buf[0]) < 0) 461 dev_warn(dev, "can't enable alarm\n"); 462 rs5c->regs[RS5C_REG_CTRL1] = buf[0]; 463 } 464 465 return 0; 466 } 467 468 #if IS_ENABLED(CONFIG_RTC_INTF_PROC) 469 470 static int rs5c372_rtc_proc(struct device *dev, struct seq_file *seq) 471 { 472 int err, osc, trim; 473 474 err = rs5c372_get_trim(to_i2c_client(dev), &osc, &trim); 475 if (err == 0) { 476 seq_printf(seq, "crystal\t\t: %d.%03d KHz\n", 477 osc / 1000, osc % 1000); 478 seq_printf(seq, "trim\t\t: %d\n", trim); 479 } 480 481 return 0; 482 } 483 484 #else 485 #define rs5c372_rtc_proc NULL 486 #endif 487 488 static const struct rtc_class_ops rs5c372_rtc_ops = { 489 .proc = rs5c372_rtc_proc, 490 .read_time = rs5c372_rtc_read_time, 491 .set_time = rs5c372_rtc_set_time, 492 .read_alarm = rs5c_read_alarm, 493 .set_alarm = rs5c_set_alarm, 494 .alarm_irq_enable = rs5c_rtc_alarm_irq_enable, 495 }; 496 497 #if IS_ENABLED(CONFIG_RTC_INTF_SYSFS) 498 499 static ssize_t rs5c372_sysfs_show_trim(struct device *dev, 500 struct device_attribute *attr, char *buf) 501 { 502 int err, trim; 503 504 err = rs5c372_get_trim(to_i2c_client(dev), NULL, &trim); 505 if (err) 506 return err; 507 508 return sprintf(buf, "%d\n", trim); 509 } 510 static DEVICE_ATTR(trim, S_IRUGO, rs5c372_sysfs_show_trim, NULL); 511 512 static ssize_t rs5c372_sysfs_show_osc(struct device *dev, 513 struct device_attribute *attr, char *buf) 514 { 515 int err, osc; 516 517 err = rs5c372_get_trim(to_i2c_client(dev), &osc, NULL); 518 if (err) 519 return err; 520 521 return sprintf(buf, "%d.%03d KHz\n", osc / 1000, osc % 1000); 522 } 523 static DEVICE_ATTR(osc, S_IRUGO, rs5c372_sysfs_show_osc, NULL); 524 525 static int rs5c_sysfs_register(struct device *dev) 526 { 527 int err; 528 529 err = device_create_file(dev, &dev_attr_trim); 530 if (err) 531 return err; 532 err = device_create_file(dev, &dev_attr_osc); 533 if (err) 534 device_remove_file(dev, &dev_attr_trim); 535 536 return err; 537 } 538 539 static void rs5c_sysfs_unregister(struct device *dev) 540 { 541 device_remove_file(dev, &dev_attr_trim); 542 device_remove_file(dev, &dev_attr_osc); 543 } 544 545 #else 546 static int rs5c_sysfs_register(struct device *dev) 547 { 548 return 0; 549 } 550 551 static void rs5c_sysfs_unregister(struct device *dev) 552 { 553 /* nothing */ 554 } 555 #endif /* SYSFS */ 556 557 static struct i2c_driver rs5c372_driver; 558 559 static int rs5c_oscillator_setup(struct rs5c372 *rs5c372) 560 { 561 unsigned char buf[2]; 562 int addr, i, ret = 0; 563 564 addr = RS5C_ADDR(RS5C_REG_CTRL1); 565 buf[0] = rs5c372->regs[RS5C_REG_CTRL1]; 566 buf[1] = rs5c372->regs[RS5C_REG_CTRL2]; 567 568 switch (rs5c372->type) { 569 case rtc_r2025sd: 570 if (buf[1] & R2x2x_CTRL2_XSTP) 571 return ret; 572 break; 573 case rtc_r2221tl: 574 if (!(buf[1] & R2x2x_CTRL2_XSTP)) 575 return ret; 576 break; 577 default: 578 if (!(buf[1] & RS5C_CTRL2_XSTP)) 579 return ret; 580 break; 581 } 582 583 /* use 24hr mode */ 584 switch (rs5c372->type) { 585 case rtc_rs5c372a: 586 case rtc_rs5c372b: 587 buf[1] |= RS5C372_CTRL2_24; 588 rs5c372->time24 = 1; 589 break; 590 case rtc_r2025sd: 591 case rtc_r2221tl: 592 case rtc_rv5c386: 593 case rtc_rv5c387a: 594 buf[0] |= RV5C387_CTRL1_24; 595 rs5c372->time24 = 1; 596 break; 597 default: 598 /* impossible */ 599 break; 600 } 601 602 for (i = 0; i < sizeof(buf); i++) { 603 addr = RS5C_ADDR(RS5C_REG_CTRL1 + i); 604 ret = i2c_smbus_write_byte_data(rs5c372->client, addr, buf[i]); 605 if (unlikely(ret < 0)) 606 return ret; 607 } 608 609 rs5c372->regs[RS5C_REG_CTRL1] = buf[0]; 610 rs5c372->regs[RS5C_REG_CTRL2] = buf[1]; 611 612 return 0; 613 } 614 615 static int rs5c372_probe(struct i2c_client *client, 616 const struct i2c_device_id *id) 617 { 618 int err = 0; 619 int smbus_mode = 0; 620 struct rs5c372 *rs5c372; 621 622 dev_dbg(&client->dev, "%s\n", __func__); 623 624 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C | 625 I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_I2C_BLOCK)) { 626 /* 627 * If we don't have any master mode adapter, try breaking 628 * it down in to the barest of capabilities. 629 */ 630 if (i2c_check_functionality(client->adapter, 631 I2C_FUNC_SMBUS_BYTE_DATA | 632 I2C_FUNC_SMBUS_I2C_BLOCK)) 633 smbus_mode = 1; 634 else { 635 /* Still no good, give up */ 636 err = -ENODEV; 637 goto exit; 638 } 639 } 640 641 rs5c372 = devm_kzalloc(&client->dev, sizeof(struct rs5c372), 642 GFP_KERNEL); 643 if (!rs5c372) { 644 err = -ENOMEM; 645 goto exit; 646 } 647 648 rs5c372->client = client; 649 i2c_set_clientdata(client, rs5c372); 650 if (client->dev.of_node) 651 rs5c372->type = (enum rtc_type) 652 of_device_get_match_data(&client->dev); 653 else 654 rs5c372->type = id->driver_data; 655 656 /* we read registers 0x0f then 0x00-0x0f; skip the first one */ 657 rs5c372->regs = &rs5c372->buf[1]; 658 rs5c372->smbus = smbus_mode; 659 660 err = rs5c_get_regs(rs5c372); 661 if (err < 0) 662 goto exit; 663 664 /* clock may be set for am/pm or 24 hr time */ 665 switch (rs5c372->type) { 666 case rtc_rs5c372a: 667 case rtc_rs5c372b: 668 /* alarm uses ALARM_A; and nINTRA on 372a, nINTR on 372b. 669 * so does periodic irq, except some 327a modes. 670 */ 671 if (rs5c372->regs[RS5C_REG_CTRL2] & RS5C372_CTRL2_24) 672 rs5c372->time24 = 1; 673 break; 674 case rtc_r2025sd: 675 case rtc_r2221tl: 676 case rtc_rv5c386: 677 case rtc_rv5c387a: 678 if (rs5c372->regs[RS5C_REG_CTRL1] & RV5C387_CTRL1_24) 679 rs5c372->time24 = 1; 680 /* alarm uses ALARM_W; and nINTRB for alarm and periodic 681 * irq, on both 386 and 387 682 */ 683 break; 684 default: 685 dev_err(&client->dev, "unknown RTC type\n"); 686 goto exit; 687 } 688 689 /* if the oscillator lost power and no other software (like 690 * the bootloader) set it up, do it here. 691 * 692 * The R2025S/D does this a little differently than the other 693 * parts, so we special case that.. 694 */ 695 err = rs5c_oscillator_setup(rs5c372); 696 if (unlikely(err < 0)) { 697 dev_err(&client->dev, "setup error\n"); 698 goto exit; 699 } 700 701 dev_info(&client->dev, "%s found, %s\n", 702 ({ char *s; switch (rs5c372->type) { 703 case rtc_r2025sd: s = "r2025sd"; break; 704 case rtc_r2221tl: s = "r2221tl"; break; 705 case rtc_rs5c372a: s = "rs5c372a"; break; 706 case rtc_rs5c372b: s = "rs5c372b"; break; 707 case rtc_rv5c386: s = "rv5c386"; break; 708 case rtc_rv5c387a: s = "rv5c387a"; break; 709 default: s = "chip"; break; 710 }; s;}), 711 rs5c372->time24 ? "24hr" : "am/pm" 712 ); 713 714 /* REVISIT use client->irq to register alarm irq ... */ 715 rs5c372->rtc = devm_rtc_device_register(&client->dev, 716 rs5c372_driver.driver.name, 717 &rs5c372_rtc_ops, THIS_MODULE); 718 719 if (IS_ERR(rs5c372->rtc)) { 720 err = PTR_ERR(rs5c372->rtc); 721 goto exit; 722 } 723 724 err = rs5c_sysfs_register(&client->dev); 725 if (err) 726 goto exit; 727 728 return 0; 729 730 exit: 731 return err; 732 } 733 734 static int rs5c372_remove(struct i2c_client *client) 735 { 736 rs5c_sysfs_unregister(&client->dev); 737 return 0; 738 } 739 740 static struct i2c_driver rs5c372_driver = { 741 .driver = { 742 .name = "rtc-rs5c372", 743 .of_match_table = of_match_ptr(rs5c372_of_match), 744 }, 745 .probe = rs5c372_probe, 746 .remove = rs5c372_remove, 747 .id_table = rs5c372_id, 748 }; 749 750 module_i2c_driver(rs5c372_driver); 751 752 MODULE_AUTHOR( 753 "Pavel Mironchik <pmironchik@optifacio.net>, " 754 "Alessandro Zummo <a.zummo@towertech.it>, " 755 "Paul Mundt <lethal@linux-sh.org>"); 756 MODULE_DESCRIPTION("Ricoh RS5C372 RTC driver"); 757 MODULE_LICENSE("GPL"); 758