xref: /openbmc/linux/drivers/rtc/rtc-pcf8563.c (revision fa0a497b)
1 /*
2  * An I2C driver for the Philips PCF8563 RTC
3  * Copyright 2005-06 Tower Technologies
4  *
5  * Author: Alessandro Zummo <a.zummo@towertech.it>
6  * Maintainers: http://www.nslu2-linux.org/
7  *
8  * based on the other drivers in this same directory.
9  *
10  * http://www.semiconductors.philips.com/acrobat/datasheets/PCF8563-04.pdf
11  *
12  * This program is free software; you can redistribute it and/or modify
13  * it under the terms of the GNU General Public License version 2 as
14  * published by the Free Software Foundation.
15  */
16 
17 #include <linux/clk-provider.h>
18 #include <linux/i2c.h>
19 #include <linux/bcd.h>
20 #include <linux/rtc.h>
21 #include <linux/slab.h>
22 #include <linux/module.h>
23 #include <linux/of.h>
24 #include <linux/err.h>
25 
26 #define DRV_VERSION "0.4.4"
27 
28 #define PCF8563_REG_ST1		0x00 /* status */
29 #define PCF8563_REG_ST2		0x01
30 #define PCF8563_BIT_AIE		(1 << 1)
31 #define PCF8563_BIT_AF		(1 << 3)
32 #define PCF8563_BITS_ST2_N	(7 << 5)
33 
34 #define PCF8563_REG_SC		0x02 /* datetime */
35 #define PCF8563_REG_MN		0x03
36 #define PCF8563_REG_HR		0x04
37 #define PCF8563_REG_DM		0x05
38 #define PCF8563_REG_DW		0x06
39 #define PCF8563_REG_MO		0x07
40 #define PCF8563_REG_YR		0x08
41 
42 #define PCF8563_REG_AMN		0x09 /* alarm */
43 
44 #define PCF8563_REG_CLKO		0x0D /* clock out */
45 #define PCF8563_REG_CLKO_FE		0x80 /* clock out enabled */
46 #define PCF8563_REG_CLKO_F_MASK		0x03 /* frequenc mask */
47 #define PCF8563_REG_CLKO_F_32768HZ	0x00
48 #define PCF8563_REG_CLKO_F_1024HZ	0x01
49 #define PCF8563_REG_CLKO_F_32HZ		0x02
50 #define PCF8563_REG_CLKO_F_1HZ		0x03
51 
52 #define PCF8563_REG_TMRC	0x0E /* timer control */
53 #define PCF8563_TMRC_ENABLE	BIT(7)
54 #define PCF8563_TMRC_4096	0
55 #define PCF8563_TMRC_64		1
56 #define PCF8563_TMRC_1		2
57 #define PCF8563_TMRC_1_60	3
58 #define PCF8563_TMRC_MASK	3
59 
60 #define PCF8563_REG_TMR		0x0F /* timer */
61 
62 #define PCF8563_SC_LV		0x80 /* low voltage */
63 #define PCF8563_MO_C		0x80 /* century */
64 
65 static struct i2c_driver pcf8563_driver;
66 
67 struct pcf8563 {
68 	struct rtc_device *rtc;
69 	/*
70 	 * The meaning of MO_C bit varies by the chip type.
71 	 * From PCF8563 datasheet: this bit is toggled when the years
72 	 * register overflows from 99 to 00
73 	 *   0 indicates the century is 20xx
74 	 *   1 indicates the century is 19xx
75 	 * From RTC8564 datasheet: this bit indicates change of
76 	 * century. When the year digit data overflows from 99 to 00,
77 	 * this bit is set. By presetting it to 0 while still in the
78 	 * 20th century, it will be set in year 2000, ...
79 	 * There seems no reliable way to know how the system use this
80 	 * bit.  So let's do it heuristically, assuming we are live in
81 	 * 1970...2069.
82 	 */
83 	int c_polarity;	/* 0: MO_C=1 means 19xx, otherwise MO_C=1 means 20xx */
84 	int voltage_low; /* incicates if a low_voltage was detected */
85 
86 	struct i2c_client *client;
87 #ifdef CONFIG_COMMON_CLK
88 	struct clk_hw		clkout_hw;
89 #endif
90 };
91 
92 static int pcf8563_read_block_data(struct i2c_client *client, unsigned char reg,
93 				   unsigned char length, unsigned char *buf)
94 {
95 	struct i2c_msg msgs[] = {
96 		{/* setup read ptr */
97 			.addr = client->addr,
98 			.len = 1,
99 			.buf = &reg,
100 		},
101 		{
102 			.addr = client->addr,
103 			.flags = I2C_M_RD,
104 			.len = length,
105 			.buf = buf
106 		},
107 	};
108 
109 	if ((i2c_transfer(client->adapter, msgs, 2)) != 2) {
110 		dev_err(&client->dev, "%s: read error\n", __func__);
111 		return -EIO;
112 	}
113 
114 	return 0;
115 }
116 
117 static int pcf8563_write_block_data(struct i2c_client *client,
118 				   unsigned char reg, unsigned char length,
119 				   unsigned char *buf)
120 {
121 	int i, err;
122 
123 	for (i = 0; i < length; i++) {
124 		unsigned char data[2] = { reg + i, buf[i] };
125 
126 		err = i2c_master_send(client, data, sizeof(data));
127 		if (err != sizeof(data)) {
128 			dev_err(&client->dev,
129 				"%s: err=%d addr=%02x, data=%02x\n",
130 				__func__, err, data[0], data[1]);
131 			return -EIO;
132 		}
133 	}
134 
135 	return 0;
136 }
137 
138 static int pcf8563_set_alarm_mode(struct i2c_client *client, bool on)
139 {
140 	unsigned char buf;
141 	int err;
142 
143 	err = pcf8563_read_block_data(client, PCF8563_REG_ST2, 1, &buf);
144 	if (err < 0)
145 		return err;
146 
147 	if (on)
148 		buf |= PCF8563_BIT_AIE;
149 	else
150 		buf &= ~PCF8563_BIT_AIE;
151 
152 	buf &= ~(PCF8563_BIT_AF | PCF8563_BITS_ST2_N);
153 
154 	err = pcf8563_write_block_data(client, PCF8563_REG_ST2, 1, &buf);
155 	if (err < 0) {
156 		dev_err(&client->dev, "%s: write error\n", __func__);
157 		return -EIO;
158 	}
159 
160 	return 0;
161 }
162 
163 static int pcf8563_get_alarm_mode(struct i2c_client *client, unsigned char *en,
164 				  unsigned char *pen)
165 {
166 	unsigned char buf;
167 	int err;
168 
169 	err = pcf8563_read_block_data(client, PCF8563_REG_ST2, 1, &buf);
170 	if (err)
171 		return err;
172 
173 	if (en)
174 		*en = !!(buf & PCF8563_BIT_AIE);
175 	if (pen)
176 		*pen = !!(buf & PCF8563_BIT_AF);
177 
178 	return 0;
179 }
180 
181 static irqreturn_t pcf8563_irq(int irq, void *dev_id)
182 {
183 	struct pcf8563 *pcf8563 = i2c_get_clientdata(dev_id);
184 	int err;
185 	char pending;
186 
187 	err = pcf8563_get_alarm_mode(pcf8563->client, NULL, &pending);
188 	if (err)
189 		return IRQ_NONE;
190 
191 	if (pending) {
192 		rtc_update_irq(pcf8563->rtc, 1, RTC_IRQF | RTC_AF);
193 		pcf8563_set_alarm_mode(pcf8563->client, 1);
194 		return IRQ_HANDLED;
195 	}
196 
197 	return IRQ_NONE;
198 }
199 
200 /*
201  * In the routines that deal directly with the pcf8563 hardware, we use
202  * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
203  */
204 static int pcf8563_get_datetime(struct i2c_client *client, struct rtc_time *tm)
205 {
206 	struct pcf8563 *pcf8563 = i2c_get_clientdata(client);
207 	unsigned char buf[9];
208 	int err;
209 
210 	err = pcf8563_read_block_data(client, PCF8563_REG_ST1, 9, buf);
211 	if (err)
212 		return err;
213 
214 	if (buf[PCF8563_REG_SC] & PCF8563_SC_LV) {
215 		pcf8563->voltage_low = 1;
216 		dev_err(&client->dev,
217 			"low voltage detected, date/time is not reliable.\n");
218 		return -EINVAL;
219 	}
220 
221 	dev_dbg(&client->dev,
222 		"%s: raw data is st1=%02x, st2=%02x, sec=%02x, min=%02x, hr=%02x, "
223 		"mday=%02x, wday=%02x, mon=%02x, year=%02x\n",
224 		__func__,
225 		buf[0], buf[1], buf[2], buf[3],
226 		buf[4], buf[5], buf[6], buf[7],
227 		buf[8]);
228 
229 
230 	tm->tm_sec = bcd2bin(buf[PCF8563_REG_SC] & 0x7F);
231 	tm->tm_min = bcd2bin(buf[PCF8563_REG_MN] & 0x7F);
232 	tm->tm_hour = bcd2bin(buf[PCF8563_REG_HR] & 0x3F); /* rtc hr 0-23 */
233 	tm->tm_mday = bcd2bin(buf[PCF8563_REG_DM] & 0x3F);
234 	tm->tm_wday = buf[PCF8563_REG_DW] & 0x07;
235 	tm->tm_mon = bcd2bin(buf[PCF8563_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
236 	tm->tm_year = bcd2bin(buf[PCF8563_REG_YR]);
237 	if (tm->tm_year < 70)
238 		tm->tm_year += 100;	/* assume we are in 1970...2069 */
239 	/* detect the polarity heuristically. see note above. */
240 	pcf8563->c_polarity = (buf[PCF8563_REG_MO] & PCF8563_MO_C) ?
241 		(tm->tm_year >= 100) : (tm->tm_year < 100);
242 
243 	dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
244 		"mday=%d, mon=%d, year=%d, wday=%d\n",
245 		__func__,
246 		tm->tm_sec, tm->tm_min, tm->tm_hour,
247 		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
248 
249 	return 0;
250 }
251 
252 static int pcf8563_set_datetime(struct i2c_client *client, struct rtc_time *tm)
253 {
254 	struct pcf8563 *pcf8563 = i2c_get_clientdata(client);
255 	unsigned char buf[9];
256 
257 	dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
258 		"mday=%d, mon=%d, year=%d, wday=%d\n",
259 		__func__,
260 		tm->tm_sec, tm->tm_min, tm->tm_hour,
261 		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
262 
263 	/* hours, minutes and seconds */
264 	buf[PCF8563_REG_SC] = bin2bcd(tm->tm_sec);
265 	buf[PCF8563_REG_MN] = bin2bcd(tm->tm_min);
266 	buf[PCF8563_REG_HR] = bin2bcd(tm->tm_hour);
267 
268 	buf[PCF8563_REG_DM] = bin2bcd(tm->tm_mday);
269 
270 	/* month, 1 - 12 */
271 	buf[PCF8563_REG_MO] = bin2bcd(tm->tm_mon + 1);
272 
273 	/* year and century */
274 	buf[PCF8563_REG_YR] = bin2bcd(tm->tm_year % 100);
275 	if (pcf8563->c_polarity ? (tm->tm_year >= 100) : (tm->tm_year < 100))
276 		buf[PCF8563_REG_MO] |= PCF8563_MO_C;
277 
278 	buf[PCF8563_REG_DW] = tm->tm_wday & 0x07;
279 
280 	return pcf8563_write_block_data(client, PCF8563_REG_SC,
281 				9 - PCF8563_REG_SC, buf + PCF8563_REG_SC);
282 }
283 
284 #ifdef CONFIG_RTC_INTF_DEV
285 static int pcf8563_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
286 {
287 	struct pcf8563 *pcf8563 = i2c_get_clientdata(to_i2c_client(dev));
288 	struct rtc_time tm;
289 
290 	switch (cmd) {
291 	case RTC_VL_READ:
292 		if (pcf8563->voltage_low)
293 			dev_info(dev, "low voltage detected, date/time is not reliable.\n");
294 
295 		if (copy_to_user((void __user *)arg, &pcf8563->voltage_low,
296 					sizeof(int)))
297 			return -EFAULT;
298 		return 0;
299 	case RTC_VL_CLR:
300 		/*
301 		 * Clear the VL bit in the seconds register in case
302 		 * the time has not been set already (which would
303 		 * have cleared it). This does not really matter
304 		 * because of the cached voltage_low value but do it
305 		 * anyway for consistency.
306 		 */
307 		if (pcf8563_get_datetime(to_i2c_client(dev), &tm))
308 			pcf8563_set_datetime(to_i2c_client(dev), &tm);
309 
310 		/* Clear the cached value. */
311 		pcf8563->voltage_low = 0;
312 
313 		return 0;
314 	default:
315 		return -ENOIOCTLCMD;
316 	}
317 }
318 #else
319 #define pcf8563_rtc_ioctl NULL
320 #endif
321 
322 static int pcf8563_rtc_read_time(struct device *dev, struct rtc_time *tm)
323 {
324 	return pcf8563_get_datetime(to_i2c_client(dev), tm);
325 }
326 
327 static int pcf8563_rtc_set_time(struct device *dev, struct rtc_time *tm)
328 {
329 	return pcf8563_set_datetime(to_i2c_client(dev), tm);
330 }
331 
332 static int pcf8563_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *tm)
333 {
334 	struct i2c_client *client = to_i2c_client(dev);
335 	unsigned char buf[4];
336 	int err;
337 
338 	err = pcf8563_read_block_data(client, PCF8563_REG_AMN, 4, buf);
339 	if (err)
340 		return err;
341 
342 	dev_dbg(&client->dev,
343 		"%s: raw data is min=%02x, hr=%02x, mday=%02x, wday=%02x\n",
344 		__func__, buf[0], buf[1], buf[2], buf[3]);
345 
346 	tm->time.tm_min = bcd2bin(buf[0] & 0x7F);
347 	tm->time.tm_hour = bcd2bin(buf[1] & 0x3F);
348 	tm->time.tm_mday = bcd2bin(buf[2] & 0x3F);
349 	tm->time.tm_wday = bcd2bin(buf[3] & 0x7);
350 	tm->time.tm_mon = -1;
351 	tm->time.tm_year = -1;
352 	tm->time.tm_yday = -1;
353 	tm->time.tm_isdst = -1;
354 
355 	err = pcf8563_get_alarm_mode(client, &tm->enabled, &tm->pending);
356 	if (err < 0)
357 		return err;
358 
359 	dev_dbg(&client->dev, "%s: tm is mins=%d, hours=%d, mday=%d, wday=%d,"
360 		" enabled=%d, pending=%d\n", __func__, tm->time.tm_min,
361 		tm->time.tm_hour, tm->time.tm_mday, tm->time.tm_wday,
362 		tm->enabled, tm->pending);
363 
364 	return 0;
365 }
366 
367 static int pcf8563_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *tm)
368 {
369 	struct i2c_client *client = to_i2c_client(dev);
370 	unsigned char buf[4];
371 	int err;
372 
373 	/* The alarm has no seconds, round up to nearest minute */
374 	if (tm->time.tm_sec) {
375 		time64_t alarm_time = rtc_tm_to_time64(&tm->time);
376 
377 		alarm_time += 60 - tm->time.tm_sec;
378 		rtc_time64_to_tm(alarm_time, &tm->time);
379 	}
380 
381 	dev_dbg(dev, "%s, min=%d hour=%d wday=%d mday=%d "
382 		"enabled=%d pending=%d\n", __func__,
383 		tm->time.tm_min, tm->time.tm_hour, tm->time.tm_wday,
384 		tm->time.tm_mday, tm->enabled, tm->pending);
385 
386 	buf[0] = bin2bcd(tm->time.tm_min);
387 	buf[1] = bin2bcd(tm->time.tm_hour);
388 	buf[2] = bin2bcd(tm->time.tm_mday);
389 	buf[3] = tm->time.tm_wday & 0x07;
390 
391 	err = pcf8563_write_block_data(client, PCF8563_REG_AMN, 4, buf);
392 	if (err)
393 		return err;
394 
395 	return pcf8563_set_alarm_mode(client, 1);
396 }
397 
398 static int pcf8563_irq_enable(struct device *dev, unsigned int enabled)
399 {
400 	dev_dbg(dev, "%s: en=%d\n", __func__, enabled);
401 	return pcf8563_set_alarm_mode(to_i2c_client(dev), !!enabled);
402 }
403 
404 #ifdef CONFIG_COMMON_CLK
405 /*
406  * Handling of the clkout
407  */
408 
409 #define clkout_hw_to_pcf8563(_hw) container_of(_hw, struct pcf8563, clkout_hw)
410 
411 static int clkout_rates[] = {
412 	32768,
413 	1024,
414 	32,
415 	1,
416 };
417 
418 static unsigned long pcf8563_clkout_recalc_rate(struct clk_hw *hw,
419 						unsigned long parent_rate)
420 {
421 	struct pcf8563 *pcf8563 = clkout_hw_to_pcf8563(hw);
422 	struct i2c_client *client = pcf8563->client;
423 	unsigned char buf;
424 	int ret = pcf8563_read_block_data(client, PCF8563_REG_CLKO, 1, &buf);
425 
426 	if (ret < 0)
427 		return 0;
428 
429 	buf &= PCF8563_REG_CLKO_F_MASK;
430 	return clkout_rates[ret];
431 }
432 
433 static long pcf8563_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
434 				      unsigned long *prate)
435 {
436 	int i;
437 
438 	for (i = 0; i < ARRAY_SIZE(clkout_rates); i++)
439 		if (clkout_rates[i] <= rate)
440 			return clkout_rates[i];
441 
442 	return 0;
443 }
444 
445 static int pcf8563_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
446 				   unsigned long parent_rate)
447 {
448 	struct pcf8563 *pcf8563 = clkout_hw_to_pcf8563(hw);
449 	struct i2c_client *client = pcf8563->client;
450 	unsigned char buf;
451 	int ret = pcf8563_read_block_data(client, PCF8563_REG_CLKO, 1, &buf);
452 	int i;
453 
454 	if (ret < 0)
455 		return ret;
456 
457 	for (i = 0; i < ARRAY_SIZE(clkout_rates); i++)
458 		if (clkout_rates[i] == rate) {
459 			buf &= ~PCF8563_REG_CLKO_F_MASK;
460 			buf |= i;
461 			ret = pcf8563_write_block_data(client,
462 						       PCF8563_REG_CLKO, 1,
463 						       &buf);
464 			return ret;
465 		}
466 
467 	return -EINVAL;
468 }
469 
470 static int pcf8563_clkout_control(struct clk_hw *hw, bool enable)
471 {
472 	struct pcf8563 *pcf8563 = clkout_hw_to_pcf8563(hw);
473 	struct i2c_client *client = pcf8563->client;
474 	unsigned char buf;
475 	int ret = pcf8563_read_block_data(client, PCF8563_REG_CLKO, 1, &buf);
476 
477 	if (ret < 0)
478 		return ret;
479 
480 	if (enable)
481 		buf |= PCF8563_REG_CLKO_FE;
482 	else
483 		buf &= ~PCF8563_REG_CLKO_FE;
484 
485 	ret = pcf8563_write_block_data(client, PCF8563_REG_CLKO, 1, &buf);
486 	return ret;
487 }
488 
489 static int pcf8563_clkout_prepare(struct clk_hw *hw)
490 {
491 	return pcf8563_clkout_control(hw, 1);
492 }
493 
494 static void pcf8563_clkout_unprepare(struct clk_hw *hw)
495 {
496 	pcf8563_clkout_control(hw, 0);
497 }
498 
499 static int pcf8563_clkout_is_prepared(struct clk_hw *hw)
500 {
501 	struct pcf8563 *pcf8563 = clkout_hw_to_pcf8563(hw);
502 	struct i2c_client *client = pcf8563->client;
503 	unsigned char buf;
504 	int ret = pcf8563_read_block_data(client, PCF8563_REG_CLKO, 1, &buf);
505 
506 	if (ret < 0)
507 		return ret;
508 
509 	return !!(buf & PCF8563_REG_CLKO_FE);
510 }
511 
512 static const struct clk_ops pcf8563_clkout_ops = {
513 	.prepare = pcf8563_clkout_prepare,
514 	.unprepare = pcf8563_clkout_unprepare,
515 	.is_prepared = pcf8563_clkout_is_prepared,
516 	.recalc_rate = pcf8563_clkout_recalc_rate,
517 	.round_rate = pcf8563_clkout_round_rate,
518 	.set_rate = pcf8563_clkout_set_rate,
519 };
520 
521 static struct clk *pcf8563_clkout_register_clk(struct pcf8563 *pcf8563)
522 {
523 	struct i2c_client *client = pcf8563->client;
524 	struct device_node *node = client->dev.of_node;
525 	struct clk *clk;
526 	struct clk_init_data init;
527 	int ret;
528 	unsigned char buf;
529 
530 	/* disable the clkout output */
531 	buf = 0;
532 	ret = pcf8563_write_block_data(client, PCF8563_REG_CLKO, 1, &buf);
533 	if (ret < 0)
534 		return ERR_PTR(ret);
535 
536 	init.name = "pcf8563-clkout";
537 	init.ops = &pcf8563_clkout_ops;
538 	init.flags = CLK_IS_ROOT;
539 	init.parent_names = NULL;
540 	init.num_parents = 0;
541 	pcf8563->clkout_hw.init = &init;
542 
543 	/* optional override of the clockname */
544 	of_property_read_string(node, "clock-output-names", &init.name);
545 
546 	/* register the clock */
547 	clk = devm_clk_register(&client->dev, &pcf8563->clkout_hw);
548 
549 	if (!IS_ERR(clk))
550 		of_clk_add_provider(node, of_clk_src_simple_get, clk);
551 
552 	return clk;
553 }
554 #endif
555 
556 static const struct rtc_class_ops pcf8563_rtc_ops = {
557 	.ioctl		= pcf8563_rtc_ioctl,
558 	.read_time	= pcf8563_rtc_read_time,
559 	.set_time	= pcf8563_rtc_set_time,
560 	.read_alarm	= pcf8563_rtc_read_alarm,
561 	.set_alarm	= pcf8563_rtc_set_alarm,
562 	.alarm_irq_enable = pcf8563_irq_enable,
563 };
564 
565 static int pcf8563_probe(struct i2c_client *client,
566 				const struct i2c_device_id *id)
567 {
568 	struct pcf8563 *pcf8563;
569 	int err;
570 	unsigned char buf;
571 	unsigned char alm_pending;
572 
573 	dev_dbg(&client->dev, "%s\n", __func__);
574 
575 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
576 		return -ENODEV;
577 
578 	pcf8563 = devm_kzalloc(&client->dev, sizeof(struct pcf8563),
579 				GFP_KERNEL);
580 	if (!pcf8563)
581 		return -ENOMEM;
582 
583 	dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
584 
585 	i2c_set_clientdata(client, pcf8563);
586 	pcf8563->client = client;
587 	device_set_wakeup_capable(&client->dev, 1);
588 
589 	/* Set timer to lowest frequency to save power (ref Haoyu datasheet) */
590 	buf = PCF8563_TMRC_1_60;
591 	err = pcf8563_write_block_data(client, PCF8563_REG_TMRC, 1, &buf);
592 	if (err < 0) {
593 		dev_err(&client->dev, "%s: write error\n", __func__);
594 		return err;
595 	}
596 
597 	err = pcf8563_get_alarm_mode(client, NULL, &alm_pending);
598 	if (err) {
599 		dev_err(&client->dev, "%s: read error\n", __func__);
600 		return err;
601 	}
602 	if (alm_pending)
603 		pcf8563_set_alarm_mode(client, 0);
604 
605 	pcf8563->rtc = devm_rtc_device_register(&client->dev,
606 				pcf8563_driver.driver.name,
607 				&pcf8563_rtc_ops, THIS_MODULE);
608 
609 	if (IS_ERR(pcf8563->rtc))
610 		return PTR_ERR(pcf8563->rtc);
611 
612 	if (client->irq > 0) {
613 		err = devm_request_threaded_irq(&client->dev, client->irq,
614 				NULL, pcf8563_irq,
615 				IRQF_SHARED|IRQF_ONESHOT|IRQF_TRIGGER_FALLING,
616 				pcf8563->rtc->name, client);
617 		if (err) {
618 			dev_err(&client->dev, "unable to request IRQ %d\n",
619 								client->irq);
620 			return err;
621 		}
622 
623 	}
624 
625 #ifdef CONFIG_COMMON_CLK
626 	/* register clk in common clk framework */
627 	pcf8563_clkout_register_clk(pcf8563);
628 #endif
629 
630 	/* the pcf8563 alarm only supports a minute accuracy */
631 	pcf8563->rtc->uie_unsupported = 1;
632 
633 	return 0;
634 }
635 
636 static const struct i2c_device_id pcf8563_id[] = {
637 	{ "pcf8563", 0 },
638 	{ "rtc8564", 0 },
639 	{ }
640 };
641 MODULE_DEVICE_TABLE(i2c, pcf8563_id);
642 
643 #ifdef CONFIG_OF
644 static const struct of_device_id pcf8563_of_match[] = {
645 	{ .compatible = "nxp,pcf8563" },
646 	{}
647 };
648 MODULE_DEVICE_TABLE(of, pcf8563_of_match);
649 #endif
650 
651 static struct i2c_driver pcf8563_driver = {
652 	.driver		= {
653 		.name	= "rtc-pcf8563",
654 		.of_match_table = of_match_ptr(pcf8563_of_match),
655 	},
656 	.probe		= pcf8563_probe,
657 	.id_table	= pcf8563_id,
658 };
659 
660 module_i2c_driver(pcf8563_driver);
661 
662 MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
663 MODULE_DESCRIPTION("Philips PCF8563/Epson RTC8564 RTC driver");
664 MODULE_LICENSE("GPL");
665 MODULE_VERSION(DRV_VERSION);
666