1 /* 2 * Copyright (C) 2012 Avionic Design GmbH 3 * 4 * This program is free software; you can redistribute it and/or modify 5 * it under the terms of the GNU General Public License version 2 as 6 * published by the Free Software Foundation. 7 */ 8 9 #include <linux/bcd.h> 10 #include <linux/i2c.h> 11 #include <linux/module.h> 12 #include <linux/rtc.h> 13 #include <linux/of.h> 14 15 #define DRIVER_NAME "rtc-pcf8523" 16 17 #define REG_CONTROL1 0x00 18 #define REG_CONTROL1_CAP_SEL (1 << 7) 19 #define REG_CONTROL1_STOP (1 << 5) 20 21 #define REG_CONTROL3 0x02 22 #define REG_CONTROL3_PM_BLD (1 << 7) /* battery low detection disabled */ 23 #define REG_CONTROL3_PM_VDD (1 << 6) /* switch-over disabled */ 24 #define REG_CONTROL3_PM_DSM (1 << 5) /* direct switching mode */ 25 #define REG_CONTROL3_PM_MASK 0xe0 26 #define REG_CONTROL3_BLF (1 << 2) /* battery low bit, read-only */ 27 28 #define REG_SECONDS 0x03 29 #define REG_SECONDS_OS (1 << 7) 30 31 #define REG_MINUTES 0x04 32 #define REG_HOURS 0x05 33 #define REG_DAYS 0x06 34 #define REG_WEEKDAYS 0x07 35 #define REG_MONTHS 0x08 36 #define REG_YEARS 0x09 37 38 #define REG_OFFSET 0x0e 39 #define REG_OFFSET_MODE BIT(7) 40 41 struct pcf8523 { 42 struct rtc_device *rtc; 43 }; 44 45 static int pcf8523_read(struct i2c_client *client, u8 reg, u8 *valuep) 46 { 47 struct i2c_msg msgs[2]; 48 u8 value = 0; 49 int err; 50 51 msgs[0].addr = client->addr; 52 msgs[0].flags = 0; 53 msgs[0].len = sizeof(reg); 54 msgs[0].buf = ® 55 56 msgs[1].addr = client->addr; 57 msgs[1].flags = I2C_M_RD; 58 msgs[1].len = sizeof(value); 59 msgs[1].buf = &value; 60 61 err = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); 62 if (err < 0) 63 return err; 64 65 *valuep = value; 66 67 return 0; 68 } 69 70 static int pcf8523_write(struct i2c_client *client, u8 reg, u8 value) 71 { 72 u8 buffer[2] = { reg, value }; 73 struct i2c_msg msg; 74 int err; 75 76 msg.addr = client->addr; 77 msg.flags = 0; 78 msg.len = sizeof(buffer); 79 msg.buf = buffer; 80 81 err = i2c_transfer(client->adapter, &msg, 1); 82 if (err < 0) 83 return err; 84 85 return 0; 86 } 87 88 static int pcf8523_select_capacitance(struct i2c_client *client, bool high) 89 { 90 u8 value; 91 int err; 92 93 err = pcf8523_read(client, REG_CONTROL1, &value); 94 if (err < 0) 95 return err; 96 97 if (!high) 98 value &= ~REG_CONTROL1_CAP_SEL; 99 else 100 value |= REG_CONTROL1_CAP_SEL; 101 102 err = pcf8523_write(client, REG_CONTROL1, value); 103 if (err < 0) 104 return err; 105 106 return err; 107 } 108 109 static int pcf8523_set_pm(struct i2c_client *client, u8 pm) 110 { 111 u8 value; 112 int err; 113 114 err = pcf8523_read(client, REG_CONTROL3, &value); 115 if (err < 0) 116 return err; 117 118 value = (value & ~REG_CONTROL3_PM_MASK) | pm; 119 120 err = pcf8523_write(client, REG_CONTROL3, value); 121 if (err < 0) 122 return err; 123 124 return 0; 125 } 126 127 static int pcf8523_stop_rtc(struct i2c_client *client) 128 { 129 u8 value; 130 int err; 131 132 err = pcf8523_read(client, REG_CONTROL1, &value); 133 if (err < 0) 134 return err; 135 136 value |= REG_CONTROL1_STOP; 137 138 err = pcf8523_write(client, REG_CONTROL1, value); 139 if (err < 0) 140 return err; 141 142 return 0; 143 } 144 145 static int pcf8523_start_rtc(struct i2c_client *client) 146 { 147 u8 value; 148 int err; 149 150 err = pcf8523_read(client, REG_CONTROL1, &value); 151 if (err < 0) 152 return err; 153 154 value &= ~REG_CONTROL1_STOP; 155 156 err = pcf8523_write(client, REG_CONTROL1, value); 157 if (err < 0) 158 return err; 159 160 return 0; 161 } 162 163 static int pcf8523_rtc_read_time(struct device *dev, struct rtc_time *tm) 164 { 165 struct i2c_client *client = to_i2c_client(dev); 166 u8 start = REG_SECONDS, regs[7]; 167 struct i2c_msg msgs[2]; 168 int err; 169 170 msgs[0].addr = client->addr; 171 msgs[0].flags = 0; 172 msgs[0].len = 1; 173 msgs[0].buf = &start; 174 175 msgs[1].addr = client->addr; 176 msgs[1].flags = I2C_M_RD; 177 msgs[1].len = sizeof(regs); 178 msgs[1].buf = regs; 179 180 err = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); 181 if (err < 0) 182 return err; 183 184 if (regs[0] & REG_SECONDS_OS) 185 return -EINVAL; 186 187 tm->tm_sec = bcd2bin(regs[0] & 0x7f); 188 tm->tm_min = bcd2bin(regs[1] & 0x7f); 189 tm->tm_hour = bcd2bin(regs[2] & 0x3f); 190 tm->tm_mday = bcd2bin(regs[3] & 0x3f); 191 tm->tm_wday = regs[4] & 0x7; 192 tm->tm_mon = bcd2bin(regs[5] & 0x1f) - 1; 193 tm->tm_year = bcd2bin(regs[6]) + 100; 194 195 return rtc_valid_tm(tm); 196 } 197 198 static int pcf8523_rtc_set_time(struct device *dev, struct rtc_time *tm) 199 { 200 struct i2c_client *client = to_i2c_client(dev); 201 struct i2c_msg msg; 202 u8 regs[8]; 203 int err; 204 205 /* 206 * The hardware can only store values between 0 and 99 in it's YEAR 207 * register (with 99 overflowing to 0 on increment). 208 * After 2100-02-28 we could start interpreting the year to be in the 209 * interval [2100, 2199], but there is no path to switch in a smooth way 210 * because the chip handles YEAR=0x00 (and the out-of-spec 211 * YEAR=0xa0) as a leap year, but 2100 isn't. 212 */ 213 if (tm->tm_year < 100 || tm->tm_year >= 200) 214 return -EINVAL; 215 216 err = pcf8523_stop_rtc(client); 217 if (err < 0) 218 return err; 219 220 regs[0] = REG_SECONDS; 221 /* This will purposely overwrite REG_SECONDS_OS */ 222 regs[1] = bin2bcd(tm->tm_sec); 223 regs[2] = bin2bcd(tm->tm_min); 224 regs[3] = bin2bcd(tm->tm_hour); 225 regs[4] = bin2bcd(tm->tm_mday); 226 regs[5] = tm->tm_wday; 227 regs[6] = bin2bcd(tm->tm_mon + 1); 228 regs[7] = bin2bcd(tm->tm_year - 100); 229 230 msg.addr = client->addr; 231 msg.flags = 0; 232 msg.len = sizeof(regs); 233 msg.buf = regs; 234 235 err = i2c_transfer(client->adapter, &msg, 1); 236 if (err < 0) { 237 /* 238 * If the time cannot be set, restart the RTC anyway. Note 239 * that errors are ignored if the RTC cannot be started so 240 * that we have a chance to propagate the original error. 241 */ 242 pcf8523_start_rtc(client); 243 return err; 244 } 245 246 return pcf8523_start_rtc(client); 247 } 248 249 #ifdef CONFIG_RTC_INTF_DEV 250 static int pcf8523_rtc_ioctl(struct device *dev, unsigned int cmd, 251 unsigned long arg) 252 { 253 struct i2c_client *client = to_i2c_client(dev); 254 u8 value; 255 int ret = 0, err; 256 257 switch (cmd) { 258 case RTC_VL_READ: 259 err = pcf8523_read(client, REG_CONTROL3, &value); 260 if (err < 0) 261 return err; 262 263 if (value & REG_CONTROL3_BLF) 264 ret = 1; 265 266 if (copy_to_user((void __user *)arg, &ret, sizeof(int))) 267 return -EFAULT; 268 269 return 0; 270 default: 271 return -ENOIOCTLCMD; 272 } 273 } 274 #else 275 #define pcf8523_rtc_ioctl NULL 276 #endif 277 278 static int pcf8523_rtc_read_offset(struct device *dev, long *offset) 279 { 280 struct i2c_client *client = to_i2c_client(dev); 281 int err; 282 u8 value; 283 s8 val; 284 285 err = pcf8523_read(client, REG_OFFSET, &value); 286 if (err < 0) 287 return err; 288 289 /* sign extend the 7-bit offset value */ 290 val = value << 1; 291 *offset = (value & REG_OFFSET_MODE ? 4069 : 4340) * (val >> 1); 292 293 return 0; 294 } 295 296 static int pcf8523_rtc_set_offset(struct device *dev, long offset) 297 { 298 struct i2c_client *client = to_i2c_client(dev); 299 long reg_m0, reg_m1; 300 u8 value; 301 302 reg_m0 = clamp(DIV_ROUND_CLOSEST(offset, 4340), -64L, 63L); 303 reg_m1 = clamp(DIV_ROUND_CLOSEST(offset, 4069), -64L, 63L); 304 305 if (abs(reg_m0 * 4340 - offset) < abs(reg_m1 * 4069 - offset)) 306 value = reg_m0 & 0x7f; 307 else 308 value = (reg_m1 & 0x7f) | REG_OFFSET_MODE; 309 310 return pcf8523_write(client, REG_OFFSET, value); 311 } 312 313 static const struct rtc_class_ops pcf8523_rtc_ops = { 314 .read_time = pcf8523_rtc_read_time, 315 .set_time = pcf8523_rtc_set_time, 316 .ioctl = pcf8523_rtc_ioctl, 317 .read_offset = pcf8523_rtc_read_offset, 318 .set_offset = pcf8523_rtc_set_offset, 319 }; 320 321 static int pcf8523_probe(struct i2c_client *client, 322 const struct i2c_device_id *id) 323 { 324 struct pcf8523 *pcf; 325 int err; 326 327 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) 328 return -ENODEV; 329 330 pcf = devm_kzalloc(&client->dev, sizeof(*pcf), GFP_KERNEL); 331 if (!pcf) 332 return -ENOMEM; 333 334 err = pcf8523_select_capacitance(client, true); 335 if (err < 0) 336 return err; 337 338 err = pcf8523_set_pm(client, 0); 339 if (err < 0) 340 return err; 341 342 pcf->rtc = devm_rtc_device_register(&client->dev, DRIVER_NAME, 343 &pcf8523_rtc_ops, THIS_MODULE); 344 if (IS_ERR(pcf->rtc)) 345 return PTR_ERR(pcf->rtc); 346 347 i2c_set_clientdata(client, pcf); 348 349 return 0; 350 } 351 352 static const struct i2c_device_id pcf8523_id[] = { 353 { "pcf8523", 0 }, 354 { } 355 }; 356 MODULE_DEVICE_TABLE(i2c, pcf8523_id); 357 358 #ifdef CONFIG_OF 359 static const struct of_device_id pcf8523_of_match[] = { 360 { .compatible = "nxp,pcf8523" }, 361 { } 362 }; 363 MODULE_DEVICE_TABLE(of, pcf8523_of_match); 364 #endif 365 366 static struct i2c_driver pcf8523_driver = { 367 .driver = { 368 .name = DRIVER_NAME, 369 .of_match_table = of_match_ptr(pcf8523_of_match), 370 }, 371 .probe = pcf8523_probe, 372 .id_table = pcf8523_id, 373 }; 374 module_i2c_driver(pcf8523_driver); 375 376 MODULE_AUTHOR("Thierry Reding <thierry.reding@avionic-design.de>"); 377 MODULE_DESCRIPTION("NXP PCF8523 RTC driver"); 378 MODULE_LICENSE("GPL v2"); 379