xref: /openbmc/linux/drivers/rtc/rtc-pcf8523.c (revision 1c2dd16a)
1 /*
2  * Copyright (C) 2012 Avionic Design GmbH
3  *
4  * This program is free software; you can redistribute it and/or modify
5  * it under the terms of the GNU General Public License version 2 as
6  * published by the Free Software Foundation.
7  */
8 
9 #include <linux/bcd.h>
10 #include <linux/i2c.h>
11 #include <linux/module.h>
12 #include <linux/rtc.h>
13 #include <linux/of.h>
14 
15 #define DRIVER_NAME "rtc-pcf8523"
16 
17 #define REG_CONTROL1 0x00
18 #define REG_CONTROL1_CAP_SEL (1 << 7)
19 #define REG_CONTROL1_STOP    (1 << 5)
20 
21 #define REG_CONTROL3 0x02
22 #define REG_CONTROL3_PM_BLD (1 << 7) /* battery low detection disabled */
23 #define REG_CONTROL3_PM_VDD (1 << 6) /* switch-over disabled */
24 #define REG_CONTROL3_PM_DSM (1 << 5) /* direct switching mode */
25 #define REG_CONTROL3_PM_MASK 0xe0
26 #define REG_CONTROL3_BLF (1 << 2) /* battery low bit, read-only */
27 
28 #define REG_SECONDS  0x03
29 #define REG_SECONDS_OS (1 << 7)
30 
31 #define REG_MINUTES  0x04
32 #define REG_HOURS    0x05
33 #define REG_DAYS     0x06
34 #define REG_WEEKDAYS 0x07
35 #define REG_MONTHS   0x08
36 #define REG_YEARS    0x09
37 
38 struct pcf8523 {
39 	struct rtc_device *rtc;
40 };
41 
42 static int pcf8523_read(struct i2c_client *client, u8 reg, u8 *valuep)
43 {
44 	struct i2c_msg msgs[2];
45 	u8 value = 0;
46 	int err;
47 
48 	msgs[0].addr = client->addr;
49 	msgs[0].flags = 0;
50 	msgs[0].len = sizeof(reg);
51 	msgs[0].buf = &reg;
52 
53 	msgs[1].addr = client->addr;
54 	msgs[1].flags = I2C_M_RD;
55 	msgs[1].len = sizeof(value);
56 	msgs[1].buf = &value;
57 
58 	err = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
59 	if (err < 0)
60 		return err;
61 
62 	*valuep = value;
63 
64 	return 0;
65 }
66 
67 static int pcf8523_write(struct i2c_client *client, u8 reg, u8 value)
68 {
69 	u8 buffer[2] = { reg, value };
70 	struct i2c_msg msg;
71 	int err;
72 
73 	msg.addr = client->addr;
74 	msg.flags = 0;
75 	msg.len = sizeof(buffer);
76 	msg.buf = buffer;
77 
78 	err = i2c_transfer(client->adapter, &msg, 1);
79 	if (err < 0)
80 		return err;
81 
82 	return 0;
83 }
84 
85 static int pcf8523_select_capacitance(struct i2c_client *client, bool high)
86 {
87 	u8 value;
88 	int err;
89 
90 	err = pcf8523_read(client, REG_CONTROL1, &value);
91 	if (err < 0)
92 		return err;
93 
94 	if (!high)
95 		value &= ~REG_CONTROL1_CAP_SEL;
96 	else
97 		value |= REG_CONTROL1_CAP_SEL;
98 
99 	err = pcf8523_write(client, REG_CONTROL1, value);
100 	if (err < 0)
101 		return err;
102 
103 	return err;
104 }
105 
106 static int pcf8523_set_pm(struct i2c_client *client, u8 pm)
107 {
108 	u8 value;
109 	int err;
110 
111 	err = pcf8523_read(client, REG_CONTROL3, &value);
112 	if (err < 0)
113 		return err;
114 
115 	value = (value & ~REG_CONTROL3_PM_MASK) | pm;
116 
117 	err = pcf8523_write(client, REG_CONTROL3, value);
118 	if (err < 0)
119 		return err;
120 
121 	return 0;
122 }
123 
124 static int pcf8523_stop_rtc(struct i2c_client *client)
125 {
126 	u8 value;
127 	int err;
128 
129 	err = pcf8523_read(client, REG_CONTROL1, &value);
130 	if (err < 0)
131 		return err;
132 
133 	value |= REG_CONTROL1_STOP;
134 
135 	err = pcf8523_write(client, REG_CONTROL1, value);
136 	if (err < 0)
137 		return err;
138 
139 	return 0;
140 }
141 
142 static int pcf8523_start_rtc(struct i2c_client *client)
143 {
144 	u8 value;
145 	int err;
146 
147 	err = pcf8523_read(client, REG_CONTROL1, &value);
148 	if (err < 0)
149 		return err;
150 
151 	value &= ~REG_CONTROL1_STOP;
152 
153 	err = pcf8523_write(client, REG_CONTROL1, value);
154 	if (err < 0)
155 		return err;
156 
157 	return 0;
158 }
159 
160 static int pcf8523_rtc_read_time(struct device *dev, struct rtc_time *tm)
161 {
162 	struct i2c_client *client = to_i2c_client(dev);
163 	u8 start = REG_SECONDS, regs[7];
164 	struct i2c_msg msgs[2];
165 	int err;
166 
167 	msgs[0].addr = client->addr;
168 	msgs[0].flags = 0;
169 	msgs[0].len = 1;
170 	msgs[0].buf = &start;
171 
172 	msgs[1].addr = client->addr;
173 	msgs[1].flags = I2C_M_RD;
174 	msgs[1].len = sizeof(regs);
175 	msgs[1].buf = regs;
176 
177 	err = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
178 	if (err < 0)
179 		return err;
180 
181 	if (regs[0] & REG_SECONDS_OS)
182 		return -EINVAL;
183 
184 	tm->tm_sec = bcd2bin(regs[0] & 0x7f);
185 	tm->tm_min = bcd2bin(regs[1] & 0x7f);
186 	tm->tm_hour = bcd2bin(regs[2] & 0x3f);
187 	tm->tm_mday = bcd2bin(regs[3] & 0x3f);
188 	tm->tm_wday = regs[4] & 0x7;
189 	tm->tm_mon = bcd2bin(regs[5] & 0x1f) - 1;
190 	tm->tm_year = bcd2bin(regs[6]) + 100;
191 
192 	return rtc_valid_tm(tm);
193 }
194 
195 static int pcf8523_rtc_set_time(struct device *dev, struct rtc_time *tm)
196 {
197 	struct i2c_client *client = to_i2c_client(dev);
198 	struct i2c_msg msg;
199 	u8 regs[8];
200 	int err;
201 
202 	/*
203 	 * The hardware can only store values between 0 and 99 in it's YEAR
204 	 * register (with 99 overflowing to 0 on increment).
205 	 * After 2100-02-28 we could start interpreting the year to be in the
206 	 * interval [2100, 2199], but there is no path to switch in a smooth way
207 	 * because the chip handles YEAR=0x00 (and the out-of-spec
208 	 * YEAR=0xa0) as a leap year, but 2100 isn't.
209 	 */
210 	if (tm->tm_year < 100 || tm->tm_year >= 200)
211 		return -EINVAL;
212 
213 	err = pcf8523_stop_rtc(client);
214 	if (err < 0)
215 		return err;
216 
217 	regs[0] = REG_SECONDS;
218 	/* This will purposely overwrite REG_SECONDS_OS */
219 	regs[1] = bin2bcd(tm->tm_sec);
220 	regs[2] = bin2bcd(tm->tm_min);
221 	regs[3] = bin2bcd(tm->tm_hour);
222 	regs[4] = bin2bcd(tm->tm_mday);
223 	regs[5] = tm->tm_wday;
224 	regs[6] = bin2bcd(tm->tm_mon + 1);
225 	regs[7] = bin2bcd(tm->tm_year - 100);
226 
227 	msg.addr = client->addr;
228 	msg.flags = 0;
229 	msg.len = sizeof(regs);
230 	msg.buf = regs;
231 
232 	err = i2c_transfer(client->adapter, &msg, 1);
233 	if (err < 0) {
234 		/*
235 		 * If the time cannot be set, restart the RTC anyway. Note
236 		 * that errors are ignored if the RTC cannot be started so
237 		 * that we have a chance to propagate the original error.
238 		 */
239 		pcf8523_start_rtc(client);
240 		return err;
241 	}
242 
243 	return pcf8523_start_rtc(client);
244 }
245 
246 #ifdef CONFIG_RTC_INTF_DEV
247 static int pcf8523_rtc_ioctl(struct device *dev, unsigned int cmd,
248 			     unsigned long arg)
249 {
250 	struct i2c_client *client = to_i2c_client(dev);
251 	u8 value;
252 	int ret = 0, err;
253 
254 	switch (cmd) {
255 	case RTC_VL_READ:
256 		err = pcf8523_read(client, REG_CONTROL3, &value);
257 		if (err < 0)
258 			return err;
259 
260 		if (value & REG_CONTROL3_BLF)
261 			ret = 1;
262 
263 		if (copy_to_user((void __user *)arg, &ret, sizeof(int)))
264 			return -EFAULT;
265 
266 		return 0;
267 	default:
268 		return -ENOIOCTLCMD;
269 	}
270 }
271 #else
272 #define pcf8523_rtc_ioctl NULL
273 #endif
274 
275 static const struct rtc_class_ops pcf8523_rtc_ops = {
276 	.read_time = pcf8523_rtc_read_time,
277 	.set_time = pcf8523_rtc_set_time,
278 	.ioctl = pcf8523_rtc_ioctl,
279 };
280 
281 static int pcf8523_probe(struct i2c_client *client,
282 			 const struct i2c_device_id *id)
283 {
284 	struct pcf8523 *pcf;
285 	int err;
286 
287 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
288 		return -ENODEV;
289 
290 	pcf = devm_kzalloc(&client->dev, sizeof(*pcf), GFP_KERNEL);
291 	if (!pcf)
292 		return -ENOMEM;
293 
294 	err = pcf8523_select_capacitance(client, true);
295 	if (err < 0)
296 		return err;
297 
298 	err = pcf8523_set_pm(client, 0);
299 	if (err < 0)
300 		return err;
301 
302 	pcf->rtc = devm_rtc_device_register(&client->dev, DRIVER_NAME,
303 				       &pcf8523_rtc_ops, THIS_MODULE);
304 	if (IS_ERR(pcf->rtc))
305 		return PTR_ERR(pcf->rtc);
306 
307 	i2c_set_clientdata(client, pcf);
308 
309 	return 0;
310 }
311 
312 static const struct i2c_device_id pcf8523_id[] = {
313 	{ "pcf8523", 0 },
314 	{ }
315 };
316 MODULE_DEVICE_TABLE(i2c, pcf8523_id);
317 
318 #ifdef CONFIG_OF
319 static const struct of_device_id pcf8523_of_match[] = {
320 	{ .compatible = "nxp,pcf8523" },
321 	{ }
322 };
323 MODULE_DEVICE_TABLE(of, pcf8523_of_match);
324 #endif
325 
326 static struct i2c_driver pcf8523_driver = {
327 	.driver = {
328 		.name = DRIVER_NAME,
329 		.of_match_table = of_match_ptr(pcf8523_of_match),
330 	},
331 	.probe = pcf8523_probe,
332 	.id_table = pcf8523_id,
333 };
334 module_i2c_driver(pcf8523_driver);
335 
336 MODULE_AUTHOR("Thierry Reding <thierry.reding@avionic-design.de>");
337 MODULE_DESCRIPTION("NXP PCF8523 RTC driver");
338 MODULE_LICENSE("GPL v2");
339