xref: /openbmc/linux/drivers/rtc/rtc-opal.c (revision 8dde5715)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * IBM OPAL RTC driver
4  * Copyright (C) 2014 IBM
5  */
6 
7 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
8 
9 #define DRVNAME		"rtc-opal"
10 
11 #include <linux/module.h>
12 #include <linux/err.h>
13 #include <linux/rtc.h>
14 #include <linux/delay.h>
15 #include <linux/bcd.h>
16 #include <linux/platform_device.h>
17 #include <linux/of.h>
18 #include <asm/opal.h>
19 #include <asm/firmware.h>
20 
21 static void opal_to_tm(u32 y_m_d, u64 h_m_s_ms, struct rtc_time *tm)
22 {
23 	tm->tm_year = ((bcd2bin(y_m_d >> 24) * 100) +
24 		       bcd2bin((y_m_d >> 16) & 0xff)) - 1900;
25 	tm->tm_mon  = bcd2bin((y_m_d >> 8) & 0xff) - 1;
26 	tm->tm_mday = bcd2bin(y_m_d & 0xff);
27 	tm->tm_hour = bcd2bin((h_m_s_ms >> 56) & 0xff);
28 	tm->tm_min  = bcd2bin((h_m_s_ms >> 48) & 0xff);
29 	tm->tm_sec  = bcd2bin((h_m_s_ms >> 40) & 0xff);
30 
31 	tm->tm_wday = -1;
32 }
33 
34 static void tm_to_opal(struct rtc_time *tm, u32 *y_m_d, u64 *h_m_s_ms)
35 {
36 	*y_m_d |= ((u32)bin2bcd((tm->tm_year + 1900) / 100)) << 24;
37 	*y_m_d |= ((u32)bin2bcd((tm->tm_year + 1900) % 100)) << 16;
38 	*y_m_d |= ((u32)bin2bcd((tm->tm_mon + 1))) << 8;
39 	*y_m_d |= ((u32)bin2bcd(tm->tm_mday));
40 
41 	*h_m_s_ms |= ((u64)bin2bcd(tm->tm_hour)) << 56;
42 	*h_m_s_ms |= ((u64)bin2bcd(tm->tm_min)) << 48;
43 	*h_m_s_ms |= ((u64)bin2bcd(tm->tm_sec)) << 40;
44 }
45 
46 static int opal_get_rtc_time(struct device *dev, struct rtc_time *tm)
47 {
48 	s64 rc = OPAL_BUSY;
49 	int retries = 10;
50 	u32 y_m_d;
51 	u64 h_m_s_ms;
52 	__be32 __y_m_d;
53 	__be64 __h_m_s_ms;
54 
55 	while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
56 		rc = opal_rtc_read(&__y_m_d, &__h_m_s_ms);
57 		if (rc == OPAL_BUSY_EVENT) {
58 			msleep(OPAL_BUSY_DELAY_MS);
59 			opal_poll_events(NULL);
60 		} else if (rc == OPAL_BUSY) {
61 			msleep(OPAL_BUSY_DELAY_MS);
62 		} else if (rc == OPAL_HARDWARE || rc == OPAL_INTERNAL_ERROR) {
63 			if (retries--) {
64 				msleep(10); /* Wait 10ms before retry */
65 				rc = OPAL_BUSY; /* go around again */
66 			}
67 		}
68 	}
69 
70 	if (rc != OPAL_SUCCESS)
71 		return -EIO;
72 
73 	y_m_d = be32_to_cpu(__y_m_d);
74 	h_m_s_ms = be64_to_cpu(__h_m_s_ms);
75 	opal_to_tm(y_m_d, h_m_s_ms, tm);
76 
77 	return 0;
78 }
79 
80 static int opal_set_rtc_time(struct device *dev, struct rtc_time *tm)
81 {
82 	s64 rc = OPAL_BUSY;
83 	int retries = 10;
84 	u32 y_m_d = 0;
85 	u64 h_m_s_ms = 0;
86 
87 	tm_to_opal(tm, &y_m_d, &h_m_s_ms);
88 
89 	while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
90 		rc = opal_rtc_write(y_m_d, h_m_s_ms);
91 		if (rc == OPAL_BUSY_EVENT) {
92 			msleep(OPAL_BUSY_DELAY_MS);
93 			opal_poll_events(NULL);
94 		} else if (rc == OPAL_BUSY) {
95 			msleep(OPAL_BUSY_DELAY_MS);
96 		} else if (rc == OPAL_HARDWARE || rc == OPAL_INTERNAL_ERROR) {
97 			if (retries--) {
98 				msleep(10); /* Wait 10ms before retry */
99 				rc = OPAL_BUSY; /* go around again */
100 			}
101 		}
102 	}
103 
104 	return rc == OPAL_SUCCESS ? 0 : -EIO;
105 }
106 
107 /*
108  * TPO	Timed Power-On
109  *
110  * TPO get/set OPAL calls care about the hour and min and to make it consistent
111  * with the rtc utility time conversion functions, we use the 'u64' to store
112  * its value and perform bit shift by 32 before use..
113  */
114 static int opal_get_tpo_time(struct device *dev, struct rtc_wkalrm *alarm)
115 {
116 	__be32 __y_m_d, __h_m;
117 	struct opal_msg msg;
118 	int rc, token;
119 	u64 h_m_s_ms;
120 	u32 y_m_d;
121 
122 	token = opal_async_get_token_interruptible();
123 	if (token < 0) {
124 		if (token != -ERESTARTSYS)
125 			pr_err("Failed to get the async token\n");
126 
127 		return token;
128 	}
129 
130 	rc = opal_tpo_read(token, &__y_m_d, &__h_m);
131 	if (rc != OPAL_ASYNC_COMPLETION) {
132 		rc = -EIO;
133 		goto exit;
134 	}
135 
136 	rc = opal_async_wait_response(token, &msg);
137 	if (rc) {
138 		rc = -EIO;
139 		goto exit;
140 	}
141 
142 	rc = opal_get_async_rc(msg);
143 	if (rc != OPAL_SUCCESS) {
144 		rc = -EIO;
145 		goto exit;
146 	}
147 
148 	y_m_d = be32_to_cpu(__y_m_d);
149 	h_m_s_ms = ((u64)be32_to_cpu(__h_m) << 32);
150 
151 	/* check if no alarm is set */
152 	if (y_m_d == 0 && h_m_s_ms == 0) {
153 		pr_debug("No alarm is set\n");
154 		rc = -ENOENT;
155 		goto exit;
156 	} else {
157 		pr_debug("Alarm set to %x %llx\n", y_m_d, h_m_s_ms);
158 	}
159 
160 	opal_to_tm(y_m_d, h_m_s_ms, &alarm->time);
161 
162 exit:
163 	opal_async_release_token(token);
164 	return rc;
165 }
166 
167 /* Set Timed Power-On */
168 static int opal_set_tpo_time(struct device *dev, struct rtc_wkalrm *alarm)
169 {
170 	u64 h_m_s_ms = 0;
171 	struct opal_msg msg;
172 	u32 y_m_d = 0;
173 	int token, rc;
174 
175 	/* if alarm is enabled */
176 	if (alarm->enabled) {
177 		tm_to_opal(&alarm->time, &y_m_d, &h_m_s_ms);
178 		pr_debug("Alarm set to %x %llx\n", y_m_d, h_m_s_ms);
179 
180 	} else {
181 		pr_debug("Alarm getting disabled\n");
182 	}
183 
184 	token = opal_async_get_token_interruptible();
185 	if (token < 0) {
186 		if (token != -ERESTARTSYS)
187 			pr_err("Failed to get the async token\n");
188 
189 		return token;
190 	}
191 
192 	/* TPO, we care about hour and minute */
193 	rc = opal_tpo_write(token, y_m_d,
194 			    (u32)((h_m_s_ms >> 32) & 0xffff0000));
195 	if (rc != OPAL_ASYNC_COMPLETION) {
196 		rc = -EIO;
197 		goto exit;
198 	}
199 
200 	rc = opal_async_wait_response(token, &msg);
201 	if (rc) {
202 		rc = -EIO;
203 		goto exit;
204 	}
205 
206 	rc = opal_get_async_rc(msg);
207 	if (rc != OPAL_SUCCESS)
208 		rc = -EIO;
209 
210 exit:
211 	opal_async_release_token(token);
212 	return rc;
213 }
214 
215 static int opal_tpo_alarm_irq_enable(struct device *dev, unsigned int enabled)
216 {
217 	struct rtc_wkalrm alarm = { .enabled = 0 };
218 
219 	/*
220 	 * TPO is automatically enabled when opal_set_tpo_time() is called with
221 	 * non-zero rtc-time. We only handle disable case which needs to be
222 	 * explicitly told to opal.
223 	 */
224 	return enabled ? 0 : opal_set_tpo_time(dev, &alarm);
225 }
226 
227 static struct rtc_class_ops opal_rtc_ops = {
228 	.read_time	= opal_get_rtc_time,
229 	.set_time	= opal_set_rtc_time,
230 };
231 
232 static int opal_rtc_probe(struct platform_device *pdev)
233 {
234 	struct rtc_device *rtc;
235 
236 	if (pdev->dev.of_node &&
237 	    (of_property_read_bool(pdev->dev.of_node, "wakeup-source") ||
238 	     of_property_read_bool(pdev->dev.of_node, "has-tpo")/* legacy */)) {
239 		device_set_wakeup_capable(&pdev->dev, true);
240 		opal_rtc_ops.read_alarm	= opal_get_tpo_time;
241 		opal_rtc_ops.set_alarm = opal_set_tpo_time;
242 		opal_rtc_ops.alarm_irq_enable = opal_tpo_alarm_irq_enable;
243 	}
244 
245 	rtc = devm_rtc_device_register(&pdev->dev, DRVNAME, &opal_rtc_ops,
246 				       THIS_MODULE);
247 	if (IS_ERR(rtc))
248 		return PTR_ERR(rtc);
249 
250 	rtc->uie_unsupported = 1;
251 
252 	return 0;
253 }
254 
255 static const struct of_device_id opal_rtc_match[] = {
256 	{
257 		.compatible	= "ibm,opal-rtc",
258 	},
259 	{ }
260 };
261 MODULE_DEVICE_TABLE(of, opal_rtc_match);
262 
263 static const struct platform_device_id opal_rtc_driver_ids[] = {
264 	{
265 		.name		= "opal-rtc",
266 	},
267 	{ }
268 };
269 MODULE_DEVICE_TABLE(platform, opal_rtc_driver_ids);
270 
271 static struct platform_driver opal_rtc_driver = {
272 	.probe		= opal_rtc_probe,
273 	.id_table	= opal_rtc_driver_ids,
274 	.driver		= {
275 		.name		= DRVNAME,
276 		.of_match_table	= opal_rtc_match,
277 	},
278 };
279 
280 static int __init opal_rtc_init(void)
281 {
282 	if (!firmware_has_feature(FW_FEATURE_OPAL))
283 		return -ENODEV;
284 
285 	return platform_driver_register(&opal_rtc_driver);
286 }
287 
288 static void __exit opal_rtc_exit(void)
289 {
290 	platform_driver_unregister(&opal_rtc_driver);
291 }
292 
293 MODULE_AUTHOR("Neelesh Gupta <neelegup@linux.vnet.ibm.com>");
294 MODULE_DESCRIPTION("IBM OPAL RTC driver");
295 MODULE_LICENSE("GPL");
296 
297 module_init(opal_rtc_init);
298 module_exit(opal_rtc_exit);
299