xref: /openbmc/linux/drivers/rtc/rtc-mxc_v2.c (revision b38269ec)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Real Time Clock (RTC) Driver for i.MX53
4  * Copyright (c) 2004-2011 Freescale Semiconductor, Inc.
5  * Copyright (c) 2017 Beckhoff Automation GmbH & Co. KG
6  */
7 
8 #include <linux/clk.h>
9 #include <linux/io.h>
10 #include <linux/module.h>
11 #include <linux/mod_devicetable.h>
12 #include <linux/platform_device.h>
13 #include <linux/pm_wakeirq.h>
14 #include <linux/rtc.h>
15 
16 #define SRTC_LPPDR_INIT       0x41736166	/* init for glitch detect */
17 
18 #define SRTC_LPCR_EN_LP       BIT(3)	/* lp enable */
19 #define SRTC_LPCR_WAE         BIT(4)	/* lp wakeup alarm enable */
20 #define SRTC_LPCR_ALP         BIT(7)	/* lp alarm flag */
21 #define SRTC_LPCR_NSA         BIT(11)	/* lp non secure access */
22 #define SRTC_LPCR_NVE         BIT(14)	/* lp non valid state exit bit */
23 #define SRTC_LPCR_IE          BIT(15)	/* lp init state exit bit */
24 
25 #define SRTC_LPSR_ALP         BIT(3)	/* lp alarm flag */
26 #define SRTC_LPSR_NVES        BIT(14)	/* lp non-valid state exit status */
27 #define SRTC_LPSR_IES         BIT(15)	/* lp init state exit status */
28 
29 #define SRTC_LPSCMR	0x00	/* LP Secure Counter MSB Reg */
30 #define SRTC_LPSCLR	0x04	/* LP Secure Counter LSB Reg */
31 #define SRTC_LPSAR	0x08	/* LP Secure Alarm Reg */
32 #define SRTC_LPCR	0x10	/* LP Control Reg */
33 #define SRTC_LPSR	0x14	/* LP Status Reg */
34 #define SRTC_LPPDR	0x18	/* LP Power Supply Glitch Detector Reg */
35 
36 /* max. number of retries to read registers, 120 was max during test */
37 #define REG_READ_TIMEOUT 2000
38 
39 struct mxc_rtc_data {
40 	struct rtc_device *rtc;
41 	void __iomem *ioaddr;
42 	struct clk *clk;
43 	spinlock_t lock; /* protects register access */
44 	int irq;
45 };
46 
47 /*
48  * This function does write synchronization for writes to the lp srtc block.
49  * To take care of the asynchronous CKIL clock, all writes from the IP domain
50  * will be synchronized to the CKIL domain.
51  * The caller should hold the pdata->lock
52  */
53 static void mxc_rtc_sync_lp_locked(struct device *dev, void __iomem *ioaddr)
54 {
55 	unsigned int i;
56 
57 	/* Wait for 3 CKIL cycles */
58 	for (i = 0; i < 3; i++) {
59 		const u32 count = readl(ioaddr + SRTC_LPSCLR);
60 		unsigned int timeout = REG_READ_TIMEOUT;
61 
62 		while ((readl(ioaddr + SRTC_LPSCLR)) == count) {
63 			if (!--timeout) {
64 				dev_err_once(dev, "SRTC_LPSCLR stuck! Check your hw.\n");
65 				return;
66 			}
67 		}
68 	}
69 }
70 
71 /* This function is the RTC interrupt service routine. */
72 static irqreturn_t mxc_rtc_interrupt(int irq, void *dev_id)
73 {
74 	struct device *dev = dev_id;
75 	struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
76 	void __iomem *ioaddr = pdata->ioaddr;
77 	u32 lp_status;
78 	u32 lp_cr;
79 
80 	spin_lock(&pdata->lock);
81 	if (clk_enable(pdata->clk)) {
82 		spin_unlock(&pdata->lock);
83 		return IRQ_NONE;
84 	}
85 
86 	lp_status = readl(ioaddr + SRTC_LPSR);
87 	lp_cr = readl(ioaddr + SRTC_LPCR);
88 
89 	/* update irq data & counter */
90 	if (lp_status & SRTC_LPSR_ALP) {
91 		if (lp_cr & SRTC_LPCR_ALP)
92 			rtc_update_irq(pdata->rtc, 1, RTC_AF | RTC_IRQF);
93 
94 		/* disable further lp alarm interrupts */
95 		lp_cr &= ~(SRTC_LPCR_ALP | SRTC_LPCR_WAE);
96 	}
97 
98 	/* Update interrupt enables */
99 	writel(lp_cr, ioaddr + SRTC_LPCR);
100 
101 	/* clear interrupt status */
102 	writel(lp_status, ioaddr + SRTC_LPSR);
103 
104 	mxc_rtc_sync_lp_locked(dev, ioaddr);
105 	clk_disable(pdata->clk);
106 	spin_unlock(&pdata->lock);
107 	return IRQ_HANDLED;
108 }
109 
110 /*
111  * Enable clk and aquire spinlock
112  * @return  0 if successful; non-zero otherwise.
113  */
114 static int mxc_rtc_lock(struct mxc_rtc_data *const pdata)
115 {
116 	int ret;
117 
118 	spin_lock_irq(&pdata->lock);
119 	ret = clk_enable(pdata->clk);
120 	if (ret) {
121 		spin_unlock_irq(&pdata->lock);
122 		return ret;
123 	}
124 	return 0;
125 }
126 
127 static int mxc_rtc_unlock(struct mxc_rtc_data *const pdata)
128 {
129 	clk_disable(pdata->clk);
130 	spin_unlock_irq(&pdata->lock);
131 	return 0;
132 }
133 
134 /*
135  * This function reads the current RTC time into tm in Gregorian date.
136  *
137  * @param  tm           contains the RTC time value upon return
138  *
139  * @return  0 if successful; non-zero otherwise.
140  */
141 static int mxc_rtc_read_time(struct device *dev, struct rtc_time *tm)
142 {
143 	struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
144 	const int clk_failed = clk_enable(pdata->clk);
145 
146 	if (!clk_failed) {
147 		const time64_t now = readl(pdata->ioaddr + SRTC_LPSCMR);
148 
149 		rtc_time64_to_tm(now, tm);
150 		clk_disable(pdata->clk);
151 		return 0;
152 	}
153 	return clk_failed;
154 }
155 
156 /*
157  * This function sets the internal RTC time based on tm in Gregorian date.
158  *
159  * @param  tm           the time value to be set in the RTC
160  *
161  * @return  0 if successful; non-zero otherwise.
162  */
163 static int mxc_rtc_set_time(struct device *dev, struct rtc_time *tm)
164 {
165 	struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
166 	time64_t time = rtc_tm_to_time64(tm);
167 	int ret;
168 
169 	ret = mxc_rtc_lock(pdata);
170 	if (ret)
171 		return ret;
172 
173 	writel(time, pdata->ioaddr + SRTC_LPSCMR);
174 	mxc_rtc_sync_lp_locked(dev, pdata->ioaddr);
175 	return mxc_rtc_unlock(pdata);
176 }
177 
178 /*
179  * This function reads the current alarm value into the passed in \b alrm
180  * argument. It updates the \b alrm's pending field value based on the whether
181  * an alarm interrupt occurs or not.
182  *
183  * @param  alrm         contains the RTC alarm value upon return
184  *
185  * @return  0 if successful; non-zero otherwise.
186  */
187 static int mxc_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
188 {
189 	struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
190 	void __iomem *ioaddr = pdata->ioaddr;
191 	int ret;
192 
193 	ret = mxc_rtc_lock(pdata);
194 	if (ret)
195 		return ret;
196 
197 	rtc_time64_to_tm(readl(ioaddr + SRTC_LPSAR), &alrm->time);
198 	alrm->pending = !!(readl(ioaddr + SRTC_LPSR) & SRTC_LPSR_ALP);
199 	return mxc_rtc_unlock(pdata);
200 }
201 
202 /*
203  * Enable/Disable alarm interrupt
204  * The caller should hold the pdata->lock
205  */
206 static void mxc_rtc_alarm_irq_enable_locked(struct mxc_rtc_data *pdata,
207 					    unsigned int enable)
208 {
209 	u32 lp_cr = readl(pdata->ioaddr + SRTC_LPCR);
210 
211 	if (enable)
212 		lp_cr |= (SRTC_LPCR_ALP | SRTC_LPCR_WAE);
213 	else
214 		lp_cr &= ~(SRTC_LPCR_ALP | SRTC_LPCR_WAE);
215 
216 	writel(lp_cr, pdata->ioaddr + SRTC_LPCR);
217 }
218 
219 static int mxc_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
220 {
221 	struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
222 	int ret = mxc_rtc_lock(pdata);
223 
224 	if (ret)
225 		return ret;
226 
227 	mxc_rtc_alarm_irq_enable_locked(pdata, enable);
228 	return mxc_rtc_unlock(pdata);
229 }
230 
231 /*
232  * This function sets the RTC alarm based on passed in alrm.
233  *
234  * @param  alrm         the alarm value to be set in the RTC
235  *
236  * @return  0 if successful; non-zero otherwise.
237  */
238 static int mxc_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
239 {
240 	const time64_t time = rtc_tm_to_time64(&alrm->time);
241 	struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
242 	int ret = mxc_rtc_lock(pdata);
243 
244 	if (ret)
245 		return ret;
246 
247 	writel((u32)time, pdata->ioaddr + SRTC_LPSAR);
248 
249 	/* clear alarm interrupt status bit */
250 	writel(SRTC_LPSR_ALP, pdata->ioaddr + SRTC_LPSR);
251 	mxc_rtc_sync_lp_locked(dev, pdata->ioaddr);
252 
253 	mxc_rtc_alarm_irq_enable_locked(pdata, alrm->enabled);
254 	mxc_rtc_sync_lp_locked(dev, pdata->ioaddr);
255 	mxc_rtc_unlock(pdata);
256 	return ret;
257 }
258 
259 static const struct rtc_class_ops mxc_rtc_ops = {
260 	.read_time = mxc_rtc_read_time,
261 	.set_time = mxc_rtc_set_time,
262 	.read_alarm = mxc_rtc_read_alarm,
263 	.set_alarm = mxc_rtc_set_alarm,
264 	.alarm_irq_enable = mxc_rtc_alarm_irq_enable,
265 };
266 
267 static int mxc_rtc_wait_for_flag(void __iomem *ioaddr, int flag)
268 {
269 	unsigned int timeout = REG_READ_TIMEOUT;
270 
271 	while (!(readl(ioaddr) & flag)) {
272 		if (!--timeout)
273 			return -EBUSY;
274 	}
275 	return 0;
276 }
277 
278 static int mxc_rtc_probe(struct platform_device *pdev)
279 {
280 	struct mxc_rtc_data *pdata;
281 	void __iomem *ioaddr;
282 	int ret = 0;
283 
284 	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
285 	if (!pdata)
286 		return -ENOMEM;
287 
288 	pdata->ioaddr = devm_platform_ioremap_resource(pdev, 0);
289 	if (IS_ERR(pdata->ioaddr))
290 		return PTR_ERR(pdata->ioaddr);
291 
292 	ioaddr = pdata->ioaddr;
293 
294 	pdata->clk = devm_clk_get(&pdev->dev, NULL);
295 	if (IS_ERR(pdata->clk)) {
296 		dev_err(&pdev->dev, "unable to get rtc clock!\n");
297 		return PTR_ERR(pdata->clk);
298 	}
299 
300 	spin_lock_init(&pdata->lock);
301 	pdata->irq = platform_get_irq(pdev, 0);
302 	if (pdata->irq < 0)
303 		return pdata->irq;
304 
305 	device_init_wakeup(&pdev->dev, 1);
306 	ret = dev_pm_set_wake_irq(&pdev->dev, pdata->irq);
307 	if (ret)
308 		dev_err(&pdev->dev, "failed to enable irq wake\n");
309 
310 	ret = clk_prepare_enable(pdata->clk);
311 	if (ret)
312 		return ret;
313 	/* initialize glitch detect */
314 	writel(SRTC_LPPDR_INIT, ioaddr + SRTC_LPPDR);
315 
316 	/* clear lp interrupt status */
317 	writel(0xFFFFFFFF, ioaddr + SRTC_LPSR);
318 
319 	/* move out of init state */
320 	writel((SRTC_LPCR_IE | SRTC_LPCR_NSA), ioaddr + SRTC_LPCR);
321 	ret = mxc_rtc_wait_for_flag(ioaddr + SRTC_LPSR, SRTC_LPSR_IES);
322 	if (ret) {
323 		dev_err(&pdev->dev, "Timeout waiting for SRTC_LPSR_IES\n");
324 		clk_disable_unprepare(pdata->clk);
325 		return ret;
326 	}
327 
328 	/* move out of non-valid state */
329 	writel((SRTC_LPCR_IE | SRTC_LPCR_NVE | SRTC_LPCR_NSA |
330 		SRTC_LPCR_EN_LP), ioaddr + SRTC_LPCR);
331 	ret = mxc_rtc_wait_for_flag(ioaddr + SRTC_LPSR, SRTC_LPSR_NVES);
332 	if (ret) {
333 		dev_err(&pdev->dev, "Timeout waiting for SRTC_LPSR_NVES\n");
334 		clk_disable_unprepare(pdata->clk);
335 		return ret;
336 	}
337 
338 	pdata->rtc = devm_rtc_allocate_device(&pdev->dev);
339 	if (IS_ERR(pdata->rtc))
340 		return PTR_ERR(pdata->rtc);
341 
342 	pdata->rtc->ops = &mxc_rtc_ops;
343 	pdata->rtc->range_max = U32_MAX;
344 
345 	clk_disable(pdata->clk);
346 	platform_set_drvdata(pdev, pdata);
347 	ret =
348 	    devm_request_irq(&pdev->dev, pdata->irq, mxc_rtc_interrupt, 0,
349 			     pdev->name, &pdev->dev);
350 	if (ret < 0) {
351 		dev_err(&pdev->dev, "interrupt not available.\n");
352 		clk_unprepare(pdata->clk);
353 		return ret;
354 	}
355 
356 	ret = devm_rtc_register_device(pdata->rtc);
357 	if (ret < 0)
358 		clk_unprepare(pdata->clk);
359 
360 	return ret;
361 }
362 
363 static int mxc_rtc_remove(struct platform_device *pdev)
364 {
365 	struct mxc_rtc_data *pdata = platform_get_drvdata(pdev);
366 
367 	clk_disable_unprepare(pdata->clk);
368 	return 0;
369 }
370 
371 static const struct of_device_id mxc_ids[] = {
372 	{ .compatible = "fsl,imx53-rtc", },
373 	{}
374 };
375 MODULE_DEVICE_TABLE(of, mxc_ids);
376 
377 static struct platform_driver mxc_rtc_driver = {
378 	.driver = {
379 		.name = "mxc_rtc_v2",
380 		.of_match_table = mxc_ids,
381 	},
382 	.probe = mxc_rtc_probe,
383 	.remove = mxc_rtc_remove,
384 };
385 
386 module_platform_driver(mxc_rtc_driver);
387 
388 MODULE_AUTHOR("Freescale Semiconductor, Inc.");
389 MODULE_DESCRIPTION("Real Time Clock (RTC) Driver for i.MX53");
390 MODULE_LICENSE("GPL");
391