1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * RTC driver for the interal RTC block in the Amlogic Meson6, Meson8, 4 * Meson8b and Meson8m2 SoCs. 5 * 6 * The RTC is split in to two parts, the AHB front end and a simple serial 7 * connection to the actual registers. This driver manages both parts. 8 * 9 * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com> 10 * Copyright (c) 2015 Ben Dooks <ben.dooks@codethink.co.uk> for Codethink Ltd 11 * Based on origin by Carlo Caione <carlo@endlessm.com> 12 */ 13 14 #include <linux/bitfield.h> 15 #include <linux/delay.h> 16 #include <linux/io.h> 17 #include <linux/kernel.h> 18 #include <linux/module.h> 19 #include <linux/nvmem-provider.h> 20 #include <linux/of.h> 21 #include <linux/platform_device.h> 22 #include <linux/regmap.h> 23 #include <linux/regulator/consumer.h> 24 #include <linux/reset.h> 25 #include <linux/rtc.h> 26 27 /* registers accessed from cpu bus */ 28 #define RTC_ADDR0 0x00 29 #define RTC_ADDR0_LINE_SCLK BIT(0) 30 #define RTC_ADDR0_LINE_SEN BIT(1) 31 #define RTC_ADDR0_LINE_SDI BIT(2) 32 #define RTC_ADDR0_START_SER BIT(17) 33 #define RTC_ADDR0_WAIT_SER BIT(22) 34 #define RTC_ADDR0_DATA GENMASK(31, 24) 35 36 #define RTC_ADDR1 0x04 37 #define RTC_ADDR1_SDO BIT(0) 38 #define RTC_ADDR1_S_READY BIT(1) 39 40 #define RTC_ADDR2 0x08 41 #define RTC_ADDR3 0x0c 42 43 #define RTC_REG4 0x10 44 #define RTC_REG4_STATIC_VALUE GENMASK(7, 0) 45 46 /* rtc registers accessed via rtc-serial interface */ 47 #define RTC_COUNTER (0) 48 #define RTC_SEC_ADJ (2) 49 #define RTC_REGMEM_0 (4) 50 #define RTC_REGMEM_1 (5) 51 #define RTC_REGMEM_2 (6) 52 #define RTC_REGMEM_3 (7) 53 54 #define RTC_ADDR_BITS (3) /* number of address bits to send */ 55 #define RTC_DATA_BITS (32) /* number of data bits to tx/rx */ 56 57 #define MESON_STATIC_BIAS_CUR (0x5 << 1) 58 #define MESON_STATIC_VOLTAGE (0x3 << 11) 59 #define MESON_STATIC_DEFAULT (MESON_STATIC_BIAS_CUR | MESON_STATIC_VOLTAGE) 60 61 struct meson_rtc { 62 struct rtc_device *rtc; /* rtc device we created */ 63 struct device *dev; /* device we bound from */ 64 struct reset_control *reset; /* reset source */ 65 struct regulator *vdd; /* voltage input */ 66 struct regmap *peripheral; /* peripheral registers */ 67 struct regmap *serial; /* serial registers */ 68 }; 69 70 static const struct regmap_config meson_rtc_peripheral_regmap_config = { 71 .name = "peripheral-registers", 72 .reg_bits = 8, 73 .val_bits = 32, 74 .reg_stride = 4, 75 .max_register = RTC_REG4, 76 .fast_io = true, 77 }; 78 79 /* RTC front-end serialiser controls */ 80 81 static void meson_rtc_sclk_pulse(struct meson_rtc *rtc) 82 { 83 udelay(5); 84 regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SCLK, 0); 85 udelay(5); 86 regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SCLK, 87 RTC_ADDR0_LINE_SCLK); 88 } 89 90 static void meson_rtc_send_bit(struct meson_rtc *rtc, unsigned int bit) 91 { 92 regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SDI, 93 bit ? RTC_ADDR0_LINE_SDI : 0); 94 meson_rtc_sclk_pulse(rtc); 95 } 96 97 static void meson_rtc_send_bits(struct meson_rtc *rtc, u32 data, 98 unsigned int nr) 99 { 100 u32 bit = 1 << (nr - 1); 101 102 while (bit) { 103 meson_rtc_send_bit(rtc, data & bit); 104 bit >>= 1; 105 } 106 } 107 108 static void meson_rtc_set_dir(struct meson_rtc *rtc, u32 mode) 109 { 110 regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SEN, 0); 111 regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SDI, 0); 112 meson_rtc_send_bit(rtc, mode); 113 regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SDI, 0); 114 } 115 116 static u32 meson_rtc_get_data(struct meson_rtc *rtc) 117 { 118 u32 tmp, val = 0; 119 int bit; 120 121 for (bit = 0; bit < RTC_DATA_BITS; bit++) { 122 meson_rtc_sclk_pulse(rtc); 123 val <<= 1; 124 125 regmap_read(rtc->peripheral, RTC_ADDR1, &tmp); 126 val |= tmp & RTC_ADDR1_SDO; 127 } 128 129 return val; 130 } 131 132 static int meson_rtc_get_bus(struct meson_rtc *rtc) 133 { 134 int ret, retries = 3; 135 u32 val; 136 137 /* prepare bus for transfers, set all lines low */ 138 val = RTC_ADDR0_LINE_SDI | RTC_ADDR0_LINE_SEN | RTC_ADDR0_LINE_SCLK; 139 regmap_update_bits(rtc->peripheral, RTC_ADDR0, val, 0); 140 141 for (retries = 0; retries < 3; retries++) { 142 /* wait for the bus to be ready */ 143 if (!regmap_read_poll_timeout(rtc->peripheral, RTC_ADDR1, val, 144 val & RTC_ADDR1_S_READY, 10, 145 10000)) 146 return 0; 147 148 dev_warn(rtc->dev, "failed to get bus, resetting RTC\n"); 149 150 ret = reset_control_reset(rtc->reset); 151 if (ret) 152 return ret; 153 } 154 155 dev_err(rtc->dev, "bus is not ready\n"); 156 return -ETIMEDOUT; 157 } 158 159 static int meson_rtc_serial_bus_reg_read(void *context, unsigned int reg, 160 unsigned int *data) 161 { 162 struct meson_rtc *rtc = context; 163 int ret; 164 165 ret = meson_rtc_get_bus(rtc); 166 if (ret) 167 return ret; 168 169 regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SEN, 170 RTC_ADDR0_LINE_SEN); 171 meson_rtc_send_bits(rtc, reg, RTC_ADDR_BITS); 172 meson_rtc_set_dir(rtc, 0); 173 *data = meson_rtc_get_data(rtc); 174 175 return 0; 176 } 177 178 static int meson_rtc_serial_bus_reg_write(void *context, unsigned int reg, 179 unsigned int data) 180 { 181 struct meson_rtc *rtc = context; 182 int ret; 183 184 ret = meson_rtc_get_bus(rtc); 185 if (ret) 186 return ret; 187 188 regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SEN, 189 RTC_ADDR0_LINE_SEN); 190 meson_rtc_send_bits(rtc, data, RTC_DATA_BITS); 191 meson_rtc_send_bits(rtc, reg, RTC_ADDR_BITS); 192 meson_rtc_set_dir(rtc, 1); 193 194 return 0; 195 } 196 197 static const struct regmap_bus meson_rtc_serial_bus = { 198 .reg_read = meson_rtc_serial_bus_reg_read, 199 .reg_write = meson_rtc_serial_bus_reg_write, 200 }; 201 202 static const struct regmap_config meson_rtc_serial_regmap_config = { 203 .name = "serial-registers", 204 .reg_bits = 4, 205 .reg_stride = 1, 206 .val_bits = 32, 207 .max_register = RTC_REGMEM_3, 208 .fast_io = false, 209 }; 210 211 static int meson_rtc_write_static(struct meson_rtc *rtc, u32 data) 212 { 213 u32 tmp; 214 215 regmap_write(rtc->peripheral, RTC_REG4, 216 FIELD_PREP(RTC_REG4_STATIC_VALUE, (data >> 8))); 217 218 /* write the static value and start the auto serializer */ 219 tmp = FIELD_PREP(RTC_ADDR0_DATA, (data & 0xff)) | RTC_ADDR0_START_SER; 220 regmap_update_bits(rtc->peripheral, RTC_ADDR0, 221 RTC_ADDR0_DATA | RTC_ADDR0_START_SER, tmp); 222 223 /* wait for the auto serializer to complete */ 224 return regmap_read_poll_timeout(rtc->peripheral, RTC_REG4, tmp, 225 !(tmp & RTC_ADDR0_WAIT_SER), 10, 226 10000); 227 } 228 229 /* RTC interface layer functions */ 230 231 static int meson_rtc_gettime(struct device *dev, struct rtc_time *tm) 232 { 233 struct meson_rtc *rtc = dev_get_drvdata(dev); 234 u32 time; 235 int ret; 236 237 ret = regmap_read(rtc->serial, RTC_COUNTER, &time); 238 if (!ret) 239 rtc_time64_to_tm(time, tm); 240 241 return ret; 242 } 243 244 static int meson_rtc_settime(struct device *dev, struct rtc_time *tm) 245 { 246 struct meson_rtc *rtc = dev_get_drvdata(dev); 247 248 return regmap_write(rtc->serial, RTC_COUNTER, rtc_tm_to_time64(tm)); 249 } 250 251 static const struct rtc_class_ops meson_rtc_ops = { 252 .read_time = meson_rtc_gettime, 253 .set_time = meson_rtc_settime, 254 }; 255 256 /* NVMEM interface layer functions */ 257 258 static int meson_rtc_regmem_read(void *context, unsigned int offset, 259 void *buf, size_t bytes) 260 { 261 struct meson_rtc *rtc = context; 262 unsigned int read_offset, read_size; 263 264 read_offset = RTC_REGMEM_0 + (offset / 4); 265 read_size = bytes / 4; 266 267 return regmap_bulk_read(rtc->serial, read_offset, buf, read_size); 268 } 269 270 static int meson_rtc_regmem_write(void *context, unsigned int offset, 271 void *buf, size_t bytes) 272 { 273 struct meson_rtc *rtc = context; 274 unsigned int write_offset, write_size; 275 276 write_offset = RTC_REGMEM_0 + (offset / 4); 277 write_size = bytes / 4; 278 279 return regmap_bulk_write(rtc->serial, write_offset, buf, write_size); 280 } 281 282 static int meson_rtc_probe(struct platform_device *pdev) 283 { 284 struct nvmem_config meson_rtc_nvmem_config = { 285 .name = "meson-rtc-regmem", 286 .type = NVMEM_TYPE_BATTERY_BACKED, 287 .word_size = 4, 288 .stride = 4, 289 .size = 4 * 4, 290 .reg_read = meson_rtc_regmem_read, 291 .reg_write = meson_rtc_regmem_write, 292 }; 293 struct device *dev = &pdev->dev; 294 struct meson_rtc *rtc; 295 struct resource *res; 296 void __iomem *base; 297 int ret; 298 u32 tm; 299 300 rtc = devm_kzalloc(dev, sizeof(struct meson_rtc), GFP_KERNEL); 301 if (!rtc) 302 return -ENOMEM; 303 304 rtc->rtc = devm_rtc_allocate_device(dev); 305 if (IS_ERR(rtc->rtc)) 306 return PTR_ERR(rtc->rtc); 307 308 platform_set_drvdata(pdev, rtc); 309 310 rtc->dev = dev; 311 312 rtc->rtc->ops = &meson_rtc_ops; 313 rtc->rtc->range_max = U32_MAX; 314 315 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 316 base = devm_ioremap_resource(dev, res); 317 if (IS_ERR(base)) 318 return PTR_ERR(base); 319 320 rtc->peripheral = devm_regmap_init_mmio(dev, base, 321 &meson_rtc_peripheral_regmap_config); 322 if (IS_ERR(rtc->peripheral)) { 323 dev_err(dev, "failed to create peripheral regmap\n"); 324 return PTR_ERR(rtc->peripheral); 325 } 326 327 rtc->reset = devm_reset_control_get(dev, NULL); 328 if (IS_ERR(rtc->reset)) { 329 dev_err(dev, "missing reset line\n"); 330 return PTR_ERR(rtc->reset); 331 } 332 333 rtc->vdd = devm_regulator_get(dev, "vdd"); 334 if (IS_ERR(rtc->vdd)) { 335 dev_err(dev, "failed to get the vdd-supply\n"); 336 return PTR_ERR(rtc->vdd); 337 } 338 339 ret = regulator_enable(rtc->vdd); 340 if (ret) { 341 dev_err(dev, "failed to enable vdd-supply\n"); 342 return ret; 343 } 344 345 ret = meson_rtc_write_static(rtc, MESON_STATIC_DEFAULT); 346 if (ret) { 347 dev_err(dev, "failed to set static values\n"); 348 goto out_disable_vdd; 349 } 350 351 rtc->serial = devm_regmap_init(dev, &meson_rtc_serial_bus, rtc, 352 &meson_rtc_serial_regmap_config); 353 if (IS_ERR(rtc->serial)) { 354 dev_err(dev, "failed to create serial regmap\n"); 355 ret = PTR_ERR(rtc->serial); 356 goto out_disable_vdd; 357 } 358 359 /* 360 * check if we can read RTC counter, if not then the RTC is probably 361 * not functional. If it isn't probably best to not bind. 362 */ 363 ret = regmap_read(rtc->serial, RTC_COUNTER, &tm); 364 if (ret) { 365 dev_err(dev, "cannot read RTC counter, RTC not functional\n"); 366 goto out_disable_vdd; 367 } 368 369 meson_rtc_nvmem_config.priv = rtc; 370 ret = rtc_nvmem_register(rtc->rtc, &meson_rtc_nvmem_config); 371 if (ret) 372 goto out_disable_vdd; 373 374 ret = rtc_register_device(rtc->rtc); 375 if (ret) 376 goto out_disable_vdd; 377 378 return 0; 379 380 out_disable_vdd: 381 regulator_disable(rtc->vdd); 382 return ret; 383 } 384 385 static const struct of_device_id meson_rtc_dt_match[] = { 386 { .compatible = "amlogic,meson6-rtc", }, 387 { .compatible = "amlogic,meson8-rtc", }, 388 { .compatible = "amlogic,meson8b-rtc", }, 389 { .compatible = "amlogic,meson8m2-rtc", }, 390 { }, 391 }; 392 MODULE_DEVICE_TABLE(of, meson_rtc_dt_match); 393 394 static struct platform_driver meson_rtc_driver = { 395 .probe = meson_rtc_probe, 396 .driver = { 397 .name = "meson-rtc", 398 .of_match_table = of_match_ptr(meson_rtc_dt_match), 399 }, 400 }; 401 module_platform_driver(meson_rtc_driver); 402 403 MODULE_DESCRIPTION("Amlogic Meson RTC Driver"); 404 MODULE_AUTHOR("Ben Dooks <ben.doosk@codethink.co.uk>"); 405 MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>"); 406 MODULE_LICENSE("GPL v2"); 407 MODULE_ALIAS("platform:meson-rtc"); 408