xref: /openbmc/linux/drivers/rtc/rtc-m41t80.c (revision b830f94f)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * I2C client/driver for the ST M41T80 family of i2c rtc chips.
4  *
5  * Author: Alexander Bigga <ab@mycable.de>
6  *
7  * Based on m41t00.c by Mark A. Greer <mgreer@mvista.com>
8  *
9  * 2006 (c) mycable GmbH
10  */
11 
12 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
13 
14 #include <linux/bcd.h>
15 #include <linux/clk-provider.h>
16 #include <linux/i2c.h>
17 #include <linux/init.h>
18 #include <linux/kernel.h>
19 #include <linux/module.h>
20 #include <linux/of_device.h>
21 #include <linux/rtc.h>
22 #include <linux/slab.h>
23 #include <linux/mutex.h>
24 #include <linux/string.h>
25 #ifdef CONFIG_RTC_DRV_M41T80_WDT
26 #include <linux/fs.h>
27 #include <linux/ioctl.h>
28 #include <linux/miscdevice.h>
29 #include <linux/reboot.h>
30 #include <linux/watchdog.h>
31 #endif
32 
33 #define M41T80_REG_SSEC		0x00
34 #define M41T80_REG_SEC		0x01
35 #define M41T80_REG_MIN		0x02
36 #define M41T80_REG_HOUR		0x03
37 #define M41T80_REG_WDAY		0x04
38 #define M41T80_REG_DAY		0x05
39 #define M41T80_REG_MON		0x06
40 #define M41T80_REG_YEAR		0x07
41 #define M41T80_REG_ALARM_MON	0x0a
42 #define M41T80_REG_ALARM_DAY	0x0b
43 #define M41T80_REG_ALARM_HOUR	0x0c
44 #define M41T80_REG_ALARM_MIN	0x0d
45 #define M41T80_REG_ALARM_SEC	0x0e
46 #define M41T80_REG_FLAGS	0x0f
47 #define M41T80_REG_SQW		0x13
48 
49 #define M41T80_DATETIME_REG_SIZE	(M41T80_REG_YEAR + 1)
50 #define M41T80_ALARM_REG_SIZE	\
51 	(M41T80_REG_ALARM_SEC + 1 - M41T80_REG_ALARM_MON)
52 
53 #define M41T80_SQW_MAX_FREQ	32768
54 
55 #define M41T80_SEC_ST		BIT(7)	/* ST: Stop Bit */
56 #define M41T80_ALMON_AFE	BIT(7)	/* AFE: AF Enable Bit */
57 #define M41T80_ALMON_SQWE	BIT(6)	/* SQWE: SQW Enable Bit */
58 #define M41T80_ALHOUR_HT	BIT(6)	/* HT: Halt Update Bit */
59 #define M41T80_FLAGS_OF		BIT(2)	/* OF: Oscillator Failure Bit */
60 #define M41T80_FLAGS_AF		BIT(6)	/* AF: Alarm Flag Bit */
61 #define M41T80_FLAGS_BATT_LOW	BIT(4)	/* BL: Battery Low Bit */
62 #define M41T80_WATCHDOG_RB2	BIT(7)	/* RB: Watchdog resolution */
63 #define M41T80_WATCHDOG_RB1	BIT(1)	/* RB: Watchdog resolution */
64 #define M41T80_WATCHDOG_RB0	BIT(0)	/* RB: Watchdog resolution */
65 
66 #define M41T80_FEATURE_HT	BIT(0)	/* Halt feature */
67 #define M41T80_FEATURE_BL	BIT(1)	/* Battery low indicator */
68 #define M41T80_FEATURE_SQ	BIT(2)	/* Squarewave feature */
69 #define M41T80_FEATURE_WD	BIT(3)	/* Extra watchdog resolution */
70 #define M41T80_FEATURE_SQ_ALT	BIT(4)	/* RSx bits are in reg 4 */
71 
72 static const struct i2c_device_id m41t80_id[] = {
73 	{ "m41t62", M41T80_FEATURE_SQ | M41T80_FEATURE_SQ_ALT },
74 	{ "m41t65", M41T80_FEATURE_HT | M41T80_FEATURE_WD },
75 	{ "m41t80", M41T80_FEATURE_SQ },
76 	{ "m41t81", M41T80_FEATURE_HT | M41T80_FEATURE_SQ},
77 	{ "m41t81s", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
78 	{ "m41t82", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
79 	{ "m41t83", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
80 	{ "m41st84", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
81 	{ "m41st85", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
82 	{ "m41st87", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
83 	{ "rv4162", M41T80_FEATURE_SQ | M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT },
84 	{ }
85 };
86 MODULE_DEVICE_TABLE(i2c, m41t80_id);
87 
88 static const struct of_device_id m41t80_of_match[] = {
89 	{
90 		.compatible = "st,m41t62",
91 		.data = (void *)(M41T80_FEATURE_SQ | M41T80_FEATURE_SQ_ALT)
92 	},
93 	{
94 		.compatible = "st,m41t65",
95 		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_WD)
96 	},
97 	{
98 		.compatible = "st,m41t80",
99 		.data = (void *)(M41T80_FEATURE_SQ)
100 	},
101 	{
102 		.compatible = "st,m41t81",
103 		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_SQ)
104 	},
105 	{
106 		.compatible = "st,m41t81s",
107 		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
108 	},
109 	{
110 		.compatible = "st,m41t82",
111 		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
112 	},
113 	{
114 		.compatible = "st,m41t83",
115 		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
116 	},
117 	{
118 		.compatible = "st,m41t84",
119 		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
120 	},
121 	{
122 		.compatible = "st,m41t85",
123 		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
124 	},
125 	{
126 		.compatible = "st,m41t87",
127 		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
128 	},
129 	{
130 		.compatible = "microcrystal,rv4162",
131 		.data = (void *)(M41T80_FEATURE_SQ | M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT)
132 	},
133 	/* DT compatibility only, do not use compatibles below: */
134 	{
135 		.compatible = "st,rv4162",
136 		.data = (void *)(M41T80_FEATURE_SQ | M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT)
137 	},
138 	{
139 		.compatible = "rv4162",
140 		.data = (void *)(M41T80_FEATURE_SQ | M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT)
141 	},
142 	{ }
143 };
144 MODULE_DEVICE_TABLE(of, m41t80_of_match);
145 
146 struct m41t80_data {
147 	unsigned long features;
148 	struct i2c_client *client;
149 	struct rtc_device *rtc;
150 #ifdef CONFIG_COMMON_CLK
151 	struct clk_hw sqw;
152 	unsigned long freq;
153 	unsigned int sqwe;
154 #endif
155 };
156 
157 static irqreturn_t m41t80_handle_irq(int irq, void *dev_id)
158 {
159 	struct i2c_client *client = dev_id;
160 	struct m41t80_data *m41t80 = i2c_get_clientdata(client);
161 	struct mutex *lock = &m41t80->rtc->ops_lock;
162 	unsigned long events = 0;
163 	int flags, flags_afe;
164 
165 	mutex_lock(lock);
166 
167 	flags_afe = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
168 	if (flags_afe < 0) {
169 		mutex_unlock(lock);
170 		return IRQ_NONE;
171 	}
172 
173 	flags = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
174 	if (flags <= 0) {
175 		mutex_unlock(lock);
176 		return IRQ_NONE;
177 	}
178 
179 	if (flags & M41T80_FLAGS_AF) {
180 		flags &= ~M41T80_FLAGS_AF;
181 		flags_afe &= ~M41T80_ALMON_AFE;
182 		events |= RTC_AF;
183 	}
184 
185 	if (events) {
186 		rtc_update_irq(m41t80->rtc, 1, events);
187 		i2c_smbus_write_byte_data(client, M41T80_REG_FLAGS, flags);
188 		i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
189 					  flags_afe);
190 	}
191 
192 	mutex_unlock(lock);
193 
194 	return IRQ_HANDLED;
195 }
196 
197 static int m41t80_rtc_read_time(struct device *dev, struct rtc_time *tm)
198 {
199 	struct i2c_client *client = to_i2c_client(dev);
200 	unsigned char buf[8];
201 	int err, flags;
202 
203 	flags = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
204 	if (flags < 0)
205 		return flags;
206 
207 	if (flags & M41T80_FLAGS_OF) {
208 		dev_err(&client->dev, "Oscillator failure, data is invalid.\n");
209 		return -EINVAL;
210 	}
211 
212 	err = i2c_smbus_read_i2c_block_data(client, M41T80_REG_SSEC,
213 					    sizeof(buf), buf);
214 	if (err < 0) {
215 		dev_err(&client->dev, "Unable to read date\n");
216 		return err;
217 	}
218 
219 	tm->tm_sec = bcd2bin(buf[M41T80_REG_SEC] & 0x7f);
220 	tm->tm_min = bcd2bin(buf[M41T80_REG_MIN] & 0x7f);
221 	tm->tm_hour = bcd2bin(buf[M41T80_REG_HOUR] & 0x3f);
222 	tm->tm_mday = bcd2bin(buf[M41T80_REG_DAY] & 0x3f);
223 	tm->tm_wday = buf[M41T80_REG_WDAY] & 0x07;
224 	tm->tm_mon = bcd2bin(buf[M41T80_REG_MON] & 0x1f) - 1;
225 
226 	/* assume 20YY not 19YY, and ignore the Century Bit */
227 	tm->tm_year = bcd2bin(buf[M41T80_REG_YEAR]) + 100;
228 	return 0;
229 }
230 
231 static int m41t80_rtc_set_time(struct device *dev, struct rtc_time *tm)
232 {
233 	struct i2c_client *client = to_i2c_client(dev);
234 	struct m41t80_data *clientdata = i2c_get_clientdata(client);
235 	unsigned char buf[8];
236 	int err, flags;
237 
238 	if (tm->tm_year < 100 || tm->tm_year > 199)
239 		return -EINVAL;
240 
241 	buf[M41T80_REG_SSEC] = 0;
242 	buf[M41T80_REG_SEC] = bin2bcd(tm->tm_sec);
243 	buf[M41T80_REG_MIN] = bin2bcd(tm->tm_min);
244 	buf[M41T80_REG_HOUR] = bin2bcd(tm->tm_hour);
245 	buf[M41T80_REG_DAY] = bin2bcd(tm->tm_mday);
246 	buf[M41T80_REG_MON] = bin2bcd(tm->tm_mon + 1);
247 	buf[M41T80_REG_YEAR] = bin2bcd(tm->tm_year - 100);
248 	buf[M41T80_REG_WDAY] = tm->tm_wday;
249 
250 	/* If the square wave output is controlled in the weekday register */
251 	if (clientdata->features & M41T80_FEATURE_SQ_ALT) {
252 		int val;
253 
254 		val = i2c_smbus_read_byte_data(client, M41T80_REG_WDAY);
255 		if (val < 0)
256 			return val;
257 
258 		buf[M41T80_REG_WDAY] |= (val & 0xf0);
259 	}
260 
261 	err = i2c_smbus_write_i2c_block_data(client, M41T80_REG_SSEC,
262 					     sizeof(buf), buf);
263 	if (err < 0) {
264 		dev_err(&client->dev, "Unable to write to date registers\n");
265 		return err;
266 	}
267 
268 	/* Clear the OF bit of Flags Register */
269 	flags = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
270 	if (flags < 0)
271 		return flags;
272 
273 	err = i2c_smbus_write_byte_data(client, M41T80_REG_FLAGS,
274 					flags & ~M41T80_FLAGS_OF);
275 	if (err < 0) {
276 		dev_err(&client->dev, "Unable to write flags register\n");
277 		return err;
278 	}
279 
280 	return err;
281 }
282 
283 static int m41t80_rtc_proc(struct device *dev, struct seq_file *seq)
284 {
285 	struct i2c_client *client = to_i2c_client(dev);
286 	struct m41t80_data *clientdata = i2c_get_clientdata(client);
287 	int reg;
288 
289 	if (clientdata->features & M41T80_FEATURE_BL) {
290 		reg = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
291 		if (reg < 0)
292 			return reg;
293 		seq_printf(seq, "battery\t\t: %s\n",
294 			   (reg & M41T80_FLAGS_BATT_LOW) ? "exhausted" : "ok");
295 	}
296 	return 0;
297 }
298 
299 static int m41t80_alarm_irq_enable(struct device *dev, unsigned int enabled)
300 {
301 	struct i2c_client *client = to_i2c_client(dev);
302 	int flags, retval;
303 
304 	flags = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
305 	if (flags < 0)
306 		return flags;
307 
308 	if (enabled)
309 		flags |= M41T80_ALMON_AFE;
310 	else
311 		flags &= ~M41T80_ALMON_AFE;
312 
313 	retval = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, flags);
314 	if (retval < 0) {
315 		dev_err(dev, "Unable to enable alarm IRQ %d\n", retval);
316 		return retval;
317 	}
318 	return 0;
319 }
320 
321 static int m41t80_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
322 {
323 	struct i2c_client *client = to_i2c_client(dev);
324 	u8 alarmvals[5];
325 	int ret, err;
326 
327 	alarmvals[0] = bin2bcd(alrm->time.tm_mon + 1);
328 	alarmvals[1] = bin2bcd(alrm->time.tm_mday);
329 	alarmvals[2] = bin2bcd(alrm->time.tm_hour);
330 	alarmvals[3] = bin2bcd(alrm->time.tm_min);
331 	alarmvals[4] = bin2bcd(alrm->time.tm_sec);
332 
333 	/* Clear AF and AFE flags */
334 	ret = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
335 	if (ret < 0)
336 		return ret;
337 	err = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
338 					ret & ~(M41T80_ALMON_AFE));
339 	if (err < 0) {
340 		dev_err(dev, "Unable to clear AFE bit\n");
341 		return err;
342 	}
343 
344 	/* Keep SQWE bit value */
345 	alarmvals[0] |= (ret & M41T80_ALMON_SQWE);
346 
347 	ret = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
348 	if (ret < 0)
349 		return ret;
350 
351 	err = i2c_smbus_write_byte_data(client, M41T80_REG_FLAGS,
352 					ret & ~(M41T80_FLAGS_AF));
353 	if (err < 0) {
354 		dev_err(dev, "Unable to clear AF bit\n");
355 		return err;
356 	}
357 
358 	/* Write the alarm */
359 	err = i2c_smbus_write_i2c_block_data(client, M41T80_REG_ALARM_MON,
360 					     5, alarmvals);
361 	if (err)
362 		return err;
363 
364 	/* Enable the alarm interrupt */
365 	if (alrm->enabled) {
366 		alarmvals[0] |= M41T80_ALMON_AFE;
367 		err = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
368 						alarmvals[0]);
369 		if (err)
370 			return err;
371 	}
372 
373 	return 0;
374 }
375 
376 static int m41t80_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
377 {
378 	struct i2c_client *client = to_i2c_client(dev);
379 	u8 alarmvals[5];
380 	int flags, ret;
381 
382 	ret = i2c_smbus_read_i2c_block_data(client, M41T80_REG_ALARM_MON,
383 					    5, alarmvals);
384 	if (ret != 5)
385 		return ret < 0 ? ret : -EIO;
386 
387 	flags = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
388 	if (flags < 0)
389 		return flags;
390 
391 	alrm->time.tm_sec  = bcd2bin(alarmvals[4] & 0x7f);
392 	alrm->time.tm_min  = bcd2bin(alarmvals[3] & 0x7f);
393 	alrm->time.tm_hour = bcd2bin(alarmvals[2] & 0x3f);
394 	alrm->time.tm_mday = bcd2bin(alarmvals[1] & 0x3f);
395 	alrm->time.tm_mon  = bcd2bin(alarmvals[0] & 0x3f) - 1;
396 
397 	alrm->enabled = !!(alarmvals[0] & M41T80_ALMON_AFE);
398 	alrm->pending = (flags & M41T80_FLAGS_AF) && alrm->enabled;
399 
400 	return 0;
401 }
402 
403 static struct rtc_class_ops m41t80_rtc_ops = {
404 	.read_time = m41t80_rtc_read_time,
405 	.set_time = m41t80_rtc_set_time,
406 	.proc = m41t80_rtc_proc,
407 };
408 
409 #ifdef CONFIG_PM_SLEEP
410 static int m41t80_suspend(struct device *dev)
411 {
412 	struct i2c_client *client = to_i2c_client(dev);
413 
414 	if (client->irq >= 0 && device_may_wakeup(dev))
415 		enable_irq_wake(client->irq);
416 
417 	return 0;
418 }
419 
420 static int m41t80_resume(struct device *dev)
421 {
422 	struct i2c_client *client = to_i2c_client(dev);
423 
424 	if (client->irq >= 0 && device_may_wakeup(dev))
425 		disable_irq_wake(client->irq);
426 
427 	return 0;
428 }
429 #endif
430 
431 static SIMPLE_DEV_PM_OPS(m41t80_pm, m41t80_suspend, m41t80_resume);
432 
433 #ifdef CONFIG_COMMON_CLK
434 #define sqw_to_m41t80_data(_hw) container_of(_hw, struct m41t80_data, sqw)
435 
436 static unsigned long m41t80_decode_freq(int setting)
437 {
438 	return (setting == 0) ? 0 : (setting == 1) ? M41T80_SQW_MAX_FREQ :
439 		M41T80_SQW_MAX_FREQ >> setting;
440 }
441 
442 static unsigned long m41t80_get_freq(struct m41t80_data *m41t80)
443 {
444 	struct i2c_client *client = m41t80->client;
445 	int reg_sqw = (m41t80->features & M41T80_FEATURE_SQ_ALT) ?
446 		M41T80_REG_WDAY : M41T80_REG_SQW;
447 	int ret = i2c_smbus_read_byte_data(client, reg_sqw);
448 
449 	if (ret < 0)
450 		return 0;
451 	return m41t80_decode_freq(ret >> 4);
452 }
453 
454 static unsigned long m41t80_sqw_recalc_rate(struct clk_hw *hw,
455 					    unsigned long parent_rate)
456 {
457 	return sqw_to_m41t80_data(hw)->freq;
458 }
459 
460 static long m41t80_sqw_round_rate(struct clk_hw *hw, unsigned long rate,
461 				  unsigned long *prate)
462 {
463 	if (rate >= M41T80_SQW_MAX_FREQ)
464 		return M41T80_SQW_MAX_FREQ;
465 	if (rate >= M41T80_SQW_MAX_FREQ / 4)
466 		return M41T80_SQW_MAX_FREQ / 4;
467 	if (!rate)
468 		return 0;
469 	return 1 << ilog2(rate);
470 }
471 
472 static int m41t80_sqw_set_rate(struct clk_hw *hw, unsigned long rate,
473 			       unsigned long parent_rate)
474 {
475 	struct m41t80_data *m41t80 = sqw_to_m41t80_data(hw);
476 	struct i2c_client *client = m41t80->client;
477 	int reg_sqw = (m41t80->features & M41T80_FEATURE_SQ_ALT) ?
478 		M41T80_REG_WDAY : M41T80_REG_SQW;
479 	int reg, ret, val = 0;
480 
481 	if (rate >= M41T80_SQW_MAX_FREQ)
482 		val = 1;
483 	else if (rate >= M41T80_SQW_MAX_FREQ / 4)
484 		val = 2;
485 	else if (rate)
486 		val = 15 - ilog2(rate);
487 
488 	reg = i2c_smbus_read_byte_data(client, reg_sqw);
489 	if (reg < 0)
490 		return reg;
491 
492 	reg = (reg & 0x0f) | (val << 4);
493 
494 	ret = i2c_smbus_write_byte_data(client, reg_sqw, reg);
495 	if (!ret)
496 		m41t80->freq = m41t80_decode_freq(val);
497 	return ret;
498 }
499 
500 static int m41t80_sqw_control(struct clk_hw *hw, bool enable)
501 {
502 	struct m41t80_data *m41t80 = sqw_to_m41t80_data(hw);
503 	struct i2c_client *client = m41t80->client;
504 	int ret = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
505 
506 	if (ret < 0)
507 		return ret;
508 
509 	if (enable)
510 		ret |= M41T80_ALMON_SQWE;
511 	else
512 		ret &= ~M41T80_ALMON_SQWE;
513 
514 	ret = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, ret);
515 	if (!ret)
516 		m41t80->sqwe = enable;
517 	return ret;
518 }
519 
520 static int m41t80_sqw_prepare(struct clk_hw *hw)
521 {
522 	return m41t80_sqw_control(hw, 1);
523 }
524 
525 static void m41t80_sqw_unprepare(struct clk_hw *hw)
526 {
527 	m41t80_sqw_control(hw, 0);
528 }
529 
530 static int m41t80_sqw_is_prepared(struct clk_hw *hw)
531 {
532 	return sqw_to_m41t80_data(hw)->sqwe;
533 }
534 
535 static const struct clk_ops m41t80_sqw_ops = {
536 	.prepare = m41t80_sqw_prepare,
537 	.unprepare = m41t80_sqw_unprepare,
538 	.is_prepared = m41t80_sqw_is_prepared,
539 	.recalc_rate = m41t80_sqw_recalc_rate,
540 	.round_rate = m41t80_sqw_round_rate,
541 	.set_rate = m41t80_sqw_set_rate,
542 };
543 
544 static struct clk *m41t80_sqw_register_clk(struct m41t80_data *m41t80)
545 {
546 	struct i2c_client *client = m41t80->client;
547 	struct device_node *node = client->dev.of_node;
548 	struct clk *clk;
549 	struct clk_init_data init;
550 	int ret;
551 
552 	/* First disable the clock */
553 	ret = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
554 	if (ret < 0)
555 		return ERR_PTR(ret);
556 	ret = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
557 					ret & ~(M41T80_ALMON_SQWE));
558 	if (ret < 0)
559 		return ERR_PTR(ret);
560 
561 	init.name = "m41t80-sqw";
562 	init.ops = &m41t80_sqw_ops;
563 	init.flags = 0;
564 	init.parent_names = NULL;
565 	init.num_parents = 0;
566 	m41t80->sqw.init = &init;
567 	m41t80->freq = m41t80_get_freq(m41t80);
568 
569 	/* optional override of the clockname */
570 	of_property_read_string(node, "clock-output-names", &init.name);
571 
572 	/* register the clock */
573 	clk = clk_register(&client->dev, &m41t80->sqw);
574 	if (!IS_ERR(clk))
575 		of_clk_add_provider(node, of_clk_src_simple_get, clk);
576 
577 	return clk;
578 }
579 #endif
580 
581 #ifdef CONFIG_RTC_DRV_M41T80_WDT
582 /*
583  *****************************************************************************
584  *
585  * Watchdog Driver
586  *
587  *****************************************************************************
588  */
589 static DEFINE_MUTEX(m41t80_rtc_mutex);
590 static struct i2c_client *save_client;
591 
592 /* Default margin */
593 #define WD_TIMO 60		/* 1..31 seconds */
594 
595 static int wdt_margin = WD_TIMO;
596 module_param(wdt_margin, int, 0);
597 MODULE_PARM_DESC(wdt_margin, "Watchdog timeout in seconds (default 60s)");
598 
599 static unsigned long wdt_is_open;
600 static int boot_flag;
601 
602 /**
603  *	wdt_ping:
604  *
605  *	Reload counter one with the watchdog timeout. We don't bother reloading
606  *	the cascade counter.
607  */
608 static void wdt_ping(void)
609 {
610 	unsigned char i2c_data[2];
611 	struct i2c_msg msgs1[1] = {
612 		{
613 			.addr	= save_client->addr,
614 			.flags	= 0,
615 			.len	= 2,
616 			.buf	= i2c_data,
617 		},
618 	};
619 	struct m41t80_data *clientdata = i2c_get_clientdata(save_client);
620 
621 	i2c_data[0] = 0x09;		/* watchdog register */
622 
623 	if (wdt_margin > 31)
624 		i2c_data[1] = (wdt_margin & 0xFC) | 0x83; /* resolution = 4s */
625 	else
626 		/*
627 		 * WDS = 1 (0x80), mulitplier = WD_TIMO, resolution = 1s (0x02)
628 		 */
629 		i2c_data[1] = wdt_margin << 2 | 0x82;
630 
631 	/*
632 	 * M41T65 has three bits for watchdog resolution.  Don't set bit 7, as
633 	 * that would be an invalid resolution.
634 	 */
635 	if (clientdata->features & M41T80_FEATURE_WD)
636 		i2c_data[1] &= ~M41T80_WATCHDOG_RB2;
637 
638 	i2c_transfer(save_client->adapter, msgs1, 1);
639 }
640 
641 /**
642  *	wdt_disable:
643  *
644  *	disables watchdog.
645  */
646 static void wdt_disable(void)
647 {
648 	unsigned char i2c_data[2], i2c_buf[0x10];
649 	struct i2c_msg msgs0[2] = {
650 		{
651 			.addr	= save_client->addr,
652 			.flags	= 0,
653 			.len	= 1,
654 			.buf	= i2c_data,
655 		},
656 		{
657 			.addr	= save_client->addr,
658 			.flags	= I2C_M_RD,
659 			.len	= 1,
660 			.buf	= i2c_buf,
661 		},
662 	};
663 	struct i2c_msg msgs1[1] = {
664 		{
665 			.addr	= save_client->addr,
666 			.flags	= 0,
667 			.len	= 2,
668 			.buf	= i2c_data,
669 		},
670 	};
671 
672 	i2c_data[0] = 0x09;
673 	i2c_transfer(save_client->adapter, msgs0, 2);
674 
675 	i2c_data[0] = 0x09;
676 	i2c_data[1] = 0x00;
677 	i2c_transfer(save_client->adapter, msgs1, 1);
678 }
679 
680 /**
681  *	wdt_write:
682  *	@file: file handle to the watchdog
683  *	@buf: buffer to write (unused as data does not matter here
684  *	@count: count of bytes
685  *	@ppos: pointer to the position to write. No seeks allowed
686  *
687  *	A write to a watchdog device is defined as a keepalive signal. Any
688  *	write of data will do, as we we don't define content meaning.
689  */
690 static ssize_t wdt_write(struct file *file, const char __user *buf,
691 			 size_t count, loff_t *ppos)
692 {
693 	if (count) {
694 		wdt_ping();
695 		return 1;
696 	}
697 	return 0;
698 }
699 
700 static ssize_t wdt_read(struct file *file, char __user *buf,
701 			size_t count, loff_t *ppos)
702 {
703 	return 0;
704 }
705 
706 /**
707  *	wdt_ioctl:
708  *	@inode: inode of the device
709  *	@file: file handle to the device
710  *	@cmd: watchdog command
711  *	@arg: argument pointer
712  *
713  *	The watchdog API defines a common set of functions for all watchdogs
714  *	according to their available features. We only actually usefully support
715  *	querying capabilities and current status.
716  */
717 static int wdt_ioctl(struct file *file, unsigned int cmd,
718 		     unsigned long arg)
719 {
720 	int new_margin, rv;
721 	static struct watchdog_info ident = {
722 		.options = WDIOF_POWERUNDER | WDIOF_KEEPALIVEPING |
723 			WDIOF_SETTIMEOUT,
724 		.firmware_version = 1,
725 		.identity = "M41T80 WTD"
726 	};
727 
728 	switch (cmd) {
729 	case WDIOC_GETSUPPORT:
730 		return copy_to_user((struct watchdog_info __user *)arg, &ident,
731 				    sizeof(ident)) ? -EFAULT : 0;
732 
733 	case WDIOC_GETSTATUS:
734 	case WDIOC_GETBOOTSTATUS:
735 		return put_user(boot_flag, (int __user *)arg);
736 	case WDIOC_KEEPALIVE:
737 		wdt_ping();
738 		return 0;
739 	case WDIOC_SETTIMEOUT:
740 		if (get_user(new_margin, (int __user *)arg))
741 			return -EFAULT;
742 		/* Arbitrary, can't find the card's limits */
743 		if (new_margin < 1 || new_margin > 124)
744 			return -EINVAL;
745 		wdt_margin = new_margin;
746 		wdt_ping();
747 		/* Fall through */
748 	case WDIOC_GETTIMEOUT:
749 		return put_user(wdt_margin, (int __user *)arg);
750 
751 	case WDIOC_SETOPTIONS:
752 		if (copy_from_user(&rv, (int __user *)arg, sizeof(int)))
753 			return -EFAULT;
754 
755 		if (rv & WDIOS_DISABLECARD) {
756 			pr_info("disable watchdog\n");
757 			wdt_disable();
758 		}
759 
760 		if (rv & WDIOS_ENABLECARD) {
761 			pr_info("enable watchdog\n");
762 			wdt_ping();
763 		}
764 
765 		return -EINVAL;
766 	}
767 	return -ENOTTY;
768 }
769 
770 static long wdt_unlocked_ioctl(struct file *file, unsigned int cmd,
771 			       unsigned long arg)
772 {
773 	int ret;
774 
775 	mutex_lock(&m41t80_rtc_mutex);
776 	ret = wdt_ioctl(file, cmd, arg);
777 	mutex_unlock(&m41t80_rtc_mutex);
778 
779 	return ret;
780 }
781 
782 /**
783  *	wdt_open:
784  *	@inode: inode of device
785  *	@file: file handle to device
786  *
787  */
788 static int wdt_open(struct inode *inode, struct file *file)
789 {
790 	if (MINOR(inode->i_rdev) == WATCHDOG_MINOR) {
791 		mutex_lock(&m41t80_rtc_mutex);
792 		if (test_and_set_bit(0, &wdt_is_open)) {
793 			mutex_unlock(&m41t80_rtc_mutex);
794 			return -EBUSY;
795 		}
796 		/*
797 		 *	Activate
798 		 */
799 		wdt_is_open = 1;
800 		mutex_unlock(&m41t80_rtc_mutex);
801 		return stream_open(inode, file);
802 	}
803 	return -ENODEV;
804 }
805 
806 /**
807  *	wdt_close:
808  *	@inode: inode to board
809  *	@file: file handle to board
810  *
811  */
812 static int wdt_release(struct inode *inode, struct file *file)
813 {
814 	if (MINOR(inode->i_rdev) == WATCHDOG_MINOR)
815 		clear_bit(0, &wdt_is_open);
816 	return 0;
817 }
818 
819 /**
820  *	notify_sys:
821  *	@this: our notifier block
822  *	@code: the event being reported
823  *	@unused: unused
824  *
825  *	Our notifier is called on system shutdowns. We want to turn the card
826  *	off at reboot otherwise the machine will reboot again during memory
827  *	test or worse yet during the following fsck. This would suck, in fact
828  *	trust me - if it happens it does suck.
829  */
830 static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
831 			  void *unused)
832 {
833 	if (code == SYS_DOWN || code == SYS_HALT)
834 		/* Disable Watchdog */
835 		wdt_disable();
836 	return NOTIFY_DONE;
837 }
838 
839 static const struct file_operations wdt_fops = {
840 	.owner	= THIS_MODULE,
841 	.read	= wdt_read,
842 	.unlocked_ioctl = wdt_unlocked_ioctl,
843 	.write	= wdt_write,
844 	.open	= wdt_open,
845 	.release = wdt_release,
846 	.llseek = no_llseek,
847 };
848 
849 static struct miscdevice wdt_dev = {
850 	.minor = WATCHDOG_MINOR,
851 	.name = "watchdog",
852 	.fops = &wdt_fops,
853 };
854 
855 /*
856  *	The WDT card needs to learn about soft shutdowns in order to
857  *	turn the timebomb registers off.
858  */
859 static struct notifier_block wdt_notifier = {
860 	.notifier_call = wdt_notify_sys,
861 };
862 #endif /* CONFIG_RTC_DRV_M41T80_WDT */
863 
864 /*
865  *****************************************************************************
866  *
867  *	Driver Interface
868  *
869  *****************************************************************************
870  */
871 
872 static int m41t80_probe(struct i2c_client *client,
873 			const struct i2c_device_id *id)
874 {
875 	struct i2c_adapter *adapter = client->adapter;
876 	int rc = 0;
877 	struct rtc_time tm;
878 	struct m41t80_data *m41t80_data = NULL;
879 	bool wakeup_source = false;
880 
881 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK |
882 				     I2C_FUNC_SMBUS_BYTE_DATA)) {
883 		dev_err(&adapter->dev, "doesn't support I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_I2C_BLOCK\n");
884 		return -ENODEV;
885 	}
886 
887 	m41t80_data = devm_kzalloc(&client->dev, sizeof(*m41t80_data),
888 				   GFP_KERNEL);
889 	if (!m41t80_data)
890 		return -ENOMEM;
891 
892 	m41t80_data->client = client;
893 	if (client->dev.of_node)
894 		m41t80_data->features = (unsigned long)
895 			of_device_get_match_data(&client->dev);
896 	else
897 		m41t80_data->features = id->driver_data;
898 	i2c_set_clientdata(client, m41t80_data);
899 
900 	m41t80_data->rtc =  devm_rtc_allocate_device(&client->dev);
901 	if (IS_ERR(m41t80_data->rtc))
902 		return PTR_ERR(m41t80_data->rtc);
903 
904 #ifdef CONFIG_OF
905 	wakeup_source = of_property_read_bool(client->dev.of_node,
906 					      "wakeup-source");
907 #endif
908 	if (client->irq > 0) {
909 		rc = devm_request_threaded_irq(&client->dev, client->irq,
910 					       NULL, m41t80_handle_irq,
911 					       IRQF_TRIGGER_LOW | IRQF_ONESHOT,
912 					       "m41t80", client);
913 		if (rc) {
914 			dev_warn(&client->dev, "unable to request IRQ, alarms disabled\n");
915 			client->irq = 0;
916 			wakeup_source = false;
917 		}
918 	}
919 	if (client->irq > 0 || wakeup_source) {
920 		m41t80_rtc_ops.read_alarm = m41t80_read_alarm;
921 		m41t80_rtc_ops.set_alarm = m41t80_set_alarm;
922 		m41t80_rtc_ops.alarm_irq_enable = m41t80_alarm_irq_enable;
923 		/* Enable the wakealarm */
924 		device_init_wakeup(&client->dev, true);
925 	}
926 
927 	m41t80_data->rtc->ops = &m41t80_rtc_ops;
928 
929 	if (client->irq <= 0) {
930 		/* We cannot support UIE mode if we do not have an IRQ line */
931 		m41t80_data->rtc->uie_unsupported = 1;
932 	}
933 
934 	/* Make sure HT (Halt Update) bit is cleared */
935 	rc = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_HOUR);
936 
937 	if (rc >= 0 && rc & M41T80_ALHOUR_HT) {
938 		if (m41t80_data->features & M41T80_FEATURE_HT) {
939 			m41t80_rtc_read_time(&client->dev, &tm);
940 			dev_info(&client->dev, "HT bit was set!\n");
941 			dev_info(&client->dev, "Power Down at %ptR\n", &tm);
942 		}
943 		rc = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_HOUR,
944 					       rc & ~M41T80_ALHOUR_HT);
945 	}
946 
947 	if (rc < 0) {
948 		dev_err(&client->dev, "Can't clear HT bit\n");
949 		return rc;
950 	}
951 
952 	/* Make sure ST (stop) bit is cleared */
953 	rc = i2c_smbus_read_byte_data(client, M41T80_REG_SEC);
954 
955 	if (rc >= 0 && rc & M41T80_SEC_ST)
956 		rc = i2c_smbus_write_byte_data(client, M41T80_REG_SEC,
957 					       rc & ~M41T80_SEC_ST);
958 	if (rc < 0) {
959 		dev_err(&client->dev, "Can't clear ST bit\n");
960 		return rc;
961 	}
962 
963 #ifdef CONFIG_RTC_DRV_M41T80_WDT
964 	if (m41t80_data->features & M41T80_FEATURE_HT) {
965 		save_client = client;
966 		rc = misc_register(&wdt_dev);
967 		if (rc)
968 			return rc;
969 		rc = register_reboot_notifier(&wdt_notifier);
970 		if (rc) {
971 			misc_deregister(&wdt_dev);
972 			return rc;
973 		}
974 	}
975 #endif
976 #ifdef CONFIG_COMMON_CLK
977 	if (m41t80_data->features & M41T80_FEATURE_SQ)
978 		m41t80_sqw_register_clk(m41t80_data);
979 #endif
980 
981 	rc = rtc_register_device(m41t80_data->rtc);
982 	if (rc)
983 		return rc;
984 
985 	return 0;
986 }
987 
988 static int m41t80_remove(struct i2c_client *client)
989 {
990 #ifdef CONFIG_RTC_DRV_M41T80_WDT
991 	struct m41t80_data *clientdata = i2c_get_clientdata(client);
992 
993 	if (clientdata->features & M41T80_FEATURE_HT) {
994 		misc_deregister(&wdt_dev);
995 		unregister_reboot_notifier(&wdt_notifier);
996 	}
997 #endif
998 
999 	return 0;
1000 }
1001 
1002 static struct i2c_driver m41t80_driver = {
1003 	.driver = {
1004 		.name = "rtc-m41t80",
1005 		.of_match_table = of_match_ptr(m41t80_of_match),
1006 		.pm = &m41t80_pm,
1007 	},
1008 	.probe = m41t80_probe,
1009 	.remove = m41t80_remove,
1010 	.id_table = m41t80_id,
1011 };
1012 
1013 module_i2c_driver(m41t80_driver);
1014 
1015 MODULE_AUTHOR("Alexander Bigga <ab@mycable.de>");
1016 MODULE_DESCRIPTION("ST Microelectronics M41T80 series RTC I2C Client Driver");
1017 MODULE_LICENSE("GPL");
1018