xref: /openbmc/linux/drivers/rtc/rtc-m41t80.c (revision 9123e3a7)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * I2C client/driver for the ST M41T80 family of i2c rtc chips.
4  *
5  * Author: Alexander Bigga <ab@mycable.de>
6  *
7  * Based on m41t00.c by Mark A. Greer <mgreer@mvista.com>
8  *
9  * 2006 (c) mycable GmbH
10  */
11 
12 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
13 
14 #include <linux/bcd.h>
15 #include <linux/clk-provider.h>
16 #include <linux/i2c.h>
17 #include <linux/init.h>
18 #include <linux/kernel.h>
19 #include <linux/module.h>
20 #include <linux/of_device.h>
21 #include <linux/rtc.h>
22 #include <linux/slab.h>
23 #include <linux/mutex.h>
24 #include <linux/string.h>
25 #ifdef CONFIG_RTC_DRV_M41T80_WDT
26 #include <linux/fs.h>
27 #include <linux/ioctl.h>
28 #include <linux/miscdevice.h>
29 #include <linux/reboot.h>
30 #include <linux/watchdog.h>
31 #endif
32 
33 #define M41T80_REG_SSEC		0x00
34 #define M41T80_REG_SEC		0x01
35 #define M41T80_REG_MIN		0x02
36 #define M41T80_REG_HOUR		0x03
37 #define M41T80_REG_WDAY		0x04
38 #define M41T80_REG_DAY		0x05
39 #define M41T80_REG_MON		0x06
40 #define M41T80_REG_YEAR		0x07
41 #define M41T80_REG_ALARM_MON	0x0a
42 #define M41T80_REG_ALARM_DAY	0x0b
43 #define M41T80_REG_ALARM_HOUR	0x0c
44 #define M41T80_REG_ALARM_MIN	0x0d
45 #define M41T80_REG_ALARM_SEC	0x0e
46 #define M41T80_REG_FLAGS	0x0f
47 #define M41T80_REG_SQW		0x13
48 
49 #define M41T80_DATETIME_REG_SIZE	(M41T80_REG_YEAR + 1)
50 #define M41T80_ALARM_REG_SIZE	\
51 	(M41T80_REG_ALARM_SEC + 1 - M41T80_REG_ALARM_MON)
52 
53 #define M41T80_SQW_MAX_FREQ	32768
54 
55 #define M41T80_SEC_ST		BIT(7)	/* ST: Stop Bit */
56 #define M41T80_ALMON_AFE	BIT(7)	/* AFE: AF Enable Bit */
57 #define M41T80_ALMON_SQWE	BIT(6)	/* SQWE: SQW Enable Bit */
58 #define M41T80_ALHOUR_HT	BIT(6)	/* HT: Halt Update Bit */
59 #define M41T80_FLAGS_OF		BIT(2)	/* OF: Oscillator Failure Bit */
60 #define M41T80_FLAGS_AF		BIT(6)	/* AF: Alarm Flag Bit */
61 #define M41T80_FLAGS_BATT_LOW	BIT(4)	/* BL: Battery Low Bit */
62 #define M41T80_WATCHDOG_RB2	BIT(7)	/* RB: Watchdog resolution */
63 #define M41T80_WATCHDOG_RB1	BIT(1)	/* RB: Watchdog resolution */
64 #define M41T80_WATCHDOG_RB0	BIT(0)	/* RB: Watchdog resolution */
65 
66 #define M41T80_FEATURE_HT	BIT(0)	/* Halt feature */
67 #define M41T80_FEATURE_BL	BIT(1)	/* Battery low indicator */
68 #define M41T80_FEATURE_SQ	BIT(2)	/* Squarewave feature */
69 #define M41T80_FEATURE_WD	BIT(3)	/* Extra watchdog resolution */
70 #define M41T80_FEATURE_SQ_ALT	BIT(4)	/* RSx bits are in reg 4 */
71 
72 static const struct i2c_device_id m41t80_id[] = {
73 	{ "m41t62", M41T80_FEATURE_SQ | M41T80_FEATURE_SQ_ALT },
74 	{ "m41t65", M41T80_FEATURE_HT | M41T80_FEATURE_WD },
75 	{ "m41t80", M41T80_FEATURE_SQ },
76 	{ "m41t81", M41T80_FEATURE_HT | M41T80_FEATURE_SQ},
77 	{ "m41t81s", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
78 	{ "m41t82", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
79 	{ "m41t83", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
80 	{ "m41st84", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
81 	{ "m41st85", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
82 	{ "m41st87", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
83 	{ "rv4162", M41T80_FEATURE_SQ | M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT },
84 	{ }
85 };
86 MODULE_DEVICE_TABLE(i2c, m41t80_id);
87 
88 static const struct of_device_id m41t80_of_match[] = {
89 	{
90 		.compatible = "st,m41t62",
91 		.data = (void *)(M41T80_FEATURE_SQ | M41T80_FEATURE_SQ_ALT)
92 	},
93 	{
94 		.compatible = "st,m41t65",
95 		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_WD)
96 	},
97 	{
98 		.compatible = "st,m41t80",
99 		.data = (void *)(M41T80_FEATURE_SQ)
100 	},
101 	{
102 		.compatible = "st,m41t81",
103 		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_SQ)
104 	},
105 	{
106 		.compatible = "st,m41t81s",
107 		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
108 	},
109 	{
110 		.compatible = "st,m41t82",
111 		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
112 	},
113 	{
114 		.compatible = "st,m41t83",
115 		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
116 	},
117 	{
118 		.compatible = "st,m41t84",
119 		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
120 	},
121 	{
122 		.compatible = "st,m41t85",
123 		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
124 	},
125 	{
126 		.compatible = "st,m41t87",
127 		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
128 	},
129 	{
130 		.compatible = "microcrystal,rv4162",
131 		.data = (void *)(M41T80_FEATURE_SQ | M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT)
132 	},
133 	/* DT compatibility only, do not use compatibles below: */
134 	{
135 		.compatible = "st,rv4162",
136 		.data = (void *)(M41T80_FEATURE_SQ | M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT)
137 	},
138 	{
139 		.compatible = "rv4162",
140 		.data = (void *)(M41T80_FEATURE_SQ | M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT)
141 	},
142 	{ }
143 };
144 MODULE_DEVICE_TABLE(of, m41t80_of_match);
145 
146 struct m41t80_data {
147 	unsigned long features;
148 	struct i2c_client *client;
149 	struct rtc_device *rtc;
150 #ifdef CONFIG_COMMON_CLK
151 	struct clk_hw sqw;
152 	unsigned long freq;
153 	unsigned int sqwe;
154 #endif
155 };
156 
157 static irqreturn_t m41t80_handle_irq(int irq, void *dev_id)
158 {
159 	struct i2c_client *client = dev_id;
160 	struct m41t80_data *m41t80 = i2c_get_clientdata(client);
161 	struct mutex *lock = &m41t80->rtc->ops_lock;
162 	unsigned long events = 0;
163 	int flags, flags_afe;
164 
165 	mutex_lock(lock);
166 
167 	flags_afe = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
168 	if (flags_afe < 0) {
169 		mutex_unlock(lock);
170 		return IRQ_NONE;
171 	}
172 
173 	flags = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
174 	if (flags <= 0) {
175 		mutex_unlock(lock);
176 		return IRQ_NONE;
177 	}
178 
179 	if (flags & M41T80_FLAGS_AF) {
180 		flags &= ~M41T80_FLAGS_AF;
181 		flags_afe &= ~M41T80_ALMON_AFE;
182 		events |= RTC_AF;
183 	}
184 
185 	if (events) {
186 		rtc_update_irq(m41t80->rtc, 1, events);
187 		i2c_smbus_write_byte_data(client, M41T80_REG_FLAGS, flags);
188 		i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
189 					  flags_afe);
190 	}
191 
192 	mutex_unlock(lock);
193 
194 	return IRQ_HANDLED;
195 }
196 
197 static int m41t80_rtc_read_time(struct device *dev, struct rtc_time *tm)
198 {
199 	struct i2c_client *client = to_i2c_client(dev);
200 	unsigned char buf[8];
201 	int err, flags;
202 
203 	flags = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
204 	if (flags < 0)
205 		return flags;
206 
207 	if (flags & M41T80_FLAGS_OF) {
208 		dev_err(&client->dev, "Oscillator failure, data is invalid.\n");
209 		return -EINVAL;
210 	}
211 
212 	err = i2c_smbus_read_i2c_block_data(client, M41T80_REG_SSEC,
213 					    sizeof(buf), buf);
214 	if (err < 0) {
215 		dev_err(&client->dev, "Unable to read date\n");
216 		return err;
217 	}
218 
219 	tm->tm_sec = bcd2bin(buf[M41T80_REG_SEC] & 0x7f);
220 	tm->tm_min = bcd2bin(buf[M41T80_REG_MIN] & 0x7f);
221 	tm->tm_hour = bcd2bin(buf[M41T80_REG_HOUR] & 0x3f);
222 	tm->tm_mday = bcd2bin(buf[M41T80_REG_DAY] & 0x3f);
223 	tm->tm_wday = buf[M41T80_REG_WDAY] & 0x07;
224 	tm->tm_mon = bcd2bin(buf[M41T80_REG_MON] & 0x1f) - 1;
225 
226 	/* assume 20YY not 19YY, and ignore the Century Bit */
227 	tm->tm_year = bcd2bin(buf[M41T80_REG_YEAR]) + 100;
228 	return 0;
229 }
230 
231 static int m41t80_rtc_set_time(struct device *dev, struct rtc_time *tm)
232 {
233 	struct i2c_client *client = to_i2c_client(dev);
234 	struct m41t80_data *clientdata = i2c_get_clientdata(client);
235 	unsigned char buf[8];
236 	int err, flags;
237 
238 	buf[M41T80_REG_SSEC] = 0;
239 	buf[M41T80_REG_SEC] = bin2bcd(tm->tm_sec);
240 	buf[M41T80_REG_MIN] = bin2bcd(tm->tm_min);
241 	buf[M41T80_REG_HOUR] = bin2bcd(tm->tm_hour);
242 	buf[M41T80_REG_DAY] = bin2bcd(tm->tm_mday);
243 	buf[M41T80_REG_MON] = bin2bcd(tm->tm_mon + 1);
244 	buf[M41T80_REG_YEAR] = bin2bcd(tm->tm_year - 100);
245 	buf[M41T80_REG_WDAY] = tm->tm_wday;
246 
247 	/* If the square wave output is controlled in the weekday register */
248 	if (clientdata->features & M41T80_FEATURE_SQ_ALT) {
249 		int val;
250 
251 		val = i2c_smbus_read_byte_data(client, M41T80_REG_WDAY);
252 		if (val < 0)
253 			return val;
254 
255 		buf[M41T80_REG_WDAY] |= (val & 0xf0);
256 	}
257 
258 	err = i2c_smbus_write_i2c_block_data(client, M41T80_REG_SSEC,
259 					     sizeof(buf), buf);
260 	if (err < 0) {
261 		dev_err(&client->dev, "Unable to write to date registers\n");
262 		return err;
263 	}
264 
265 	/* Clear the OF bit of Flags Register */
266 	flags = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
267 	if (flags < 0)
268 		return flags;
269 
270 	err = i2c_smbus_write_byte_data(client, M41T80_REG_FLAGS,
271 					flags & ~M41T80_FLAGS_OF);
272 	if (err < 0) {
273 		dev_err(&client->dev, "Unable to write flags register\n");
274 		return err;
275 	}
276 
277 	return err;
278 }
279 
280 static int m41t80_rtc_proc(struct device *dev, struct seq_file *seq)
281 {
282 	struct i2c_client *client = to_i2c_client(dev);
283 	struct m41t80_data *clientdata = i2c_get_clientdata(client);
284 	int reg;
285 
286 	if (clientdata->features & M41T80_FEATURE_BL) {
287 		reg = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
288 		if (reg < 0)
289 			return reg;
290 		seq_printf(seq, "battery\t\t: %s\n",
291 			   (reg & M41T80_FLAGS_BATT_LOW) ? "exhausted" : "ok");
292 	}
293 	return 0;
294 }
295 
296 static int m41t80_alarm_irq_enable(struct device *dev, unsigned int enabled)
297 {
298 	struct i2c_client *client = to_i2c_client(dev);
299 	int flags, retval;
300 
301 	flags = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
302 	if (flags < 0)
303 		return flags;
304 
305 	if (enabled)
306 		flags |= M41T80_ALMON_AFE;
307 	else
308 		flags &= ~M41T80_ALMON_AFE;
309 
310 	retval = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, flags);
311 	if (retval < 0) {
312 		dev_err(dev, "Unable to enable alarm IRQ %d\n", retval);
313 		return retval;
314 	}
315 	return 0;
316 }
317 
318 static int m41t80_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
319 {
320 	struct i2c_client *client = to_i2c_client(dev);
321 	u8 alarmvals[5];
322 	int ret, err;
323 
324 	alarmvals[0] = bin2bcd(alrm->time.tm_mon + 1);
325 	alarmvals[1] = bin2bcd(alrm->time.tm_mday);
326 	alarmvals[2] = bin2bcd(alrm->time.tm_hour);
327 	alarmvals[3] = bin2bcd(alrm->time.tm_min);
328 	alarmvals[4] = bin2bcd(alrm->time.tm_sec);
329 
330 	/* Clear AF and AFE flags */
331 	ret = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
332 	if (ret < 0)
333 		return ret;
334 	err = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
335 					ret & ~(M41T80_ALMON_AFE));
336 	if (err < 0) {
337 		dev_err(dev, "Unable to clear AFE bit\n");
338 		return err;
339 	}
340 
341 	/* Keep SQWE bit value */
342 	alarmvals[0] |= (ret & M41T80_ALMON_SQWE);
343 
344 	ret = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
345 	if (ret < 0)
346 		return ret;
347 
348 	err = i2c_smbus_write_byte_data(client, M41T80_REG_FLAGS,
349 					ret & ~(M41T80_FLAGS_AF));
350 	if (err < 0) {
351 		dev_err(dev, "Unable to clear AF bit\n");
352 		return err;
353 	}
354 
355 	/* Write the alarm */
356 	err = i2c_smbus_write_i2c_block_data(client, M41T80_REG_ALARM_MON,
357 					     5, alarmvals);
358 	if (err)
359 		return err;
360 
361 	/* Enable the alarm interrupt */
362 	if (alrm->enabled) {
363 		alarmvals[0] |= M41T80_ALMON_AFE;
364 		err = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
365 						alarmvals[0]);
366 		if (err)
367 			return err;
368 	}
369 
370 	return 0;
371 }
372 
373 static int m41t80_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
374 {
375 	struct i2c_client *client = to_i2c_client(dev);
376 	u8 alarmvals[5];
377 	int flags, ret;
378 
379 	ret = i2c_smbus_read_i2c_block_data(client, M41T80_REG_ALARM_MON,
380 					    5, alarmvals);
381 	if (ret != 5)
382 		return ret < 0 ? ret : -EIO;
383 
384 	flags = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
385 	if (flags < 0)
386 		return flags;
387 
388 	alrm->time.tm_sec  = bcd2bin(alarmvals[4] & 0x7f);
389 	alrm->time.tm_min  = bcd2bin(alarmvals[3] & 0x7f);
390 	alrm->time.tm_hour = bcd2bin(alarmvals[2] & 0x3f);
391 	alrm->time.tm_mday = bcd2bin(alarmvals[1] & 0x3f);
392 	alrm->time.tm_mon  = bcd2bin(alarmvals[0] & 0x3f) - 1;
393 
394 	alrm->enabled = !!(alarmvals[0] & M41T80_ALMON_AFE);
395 	alrm->pending = (flags & M41T80_FLAGS_AF) && alrm->enabled;
396 
397 	return 0;
398 }
399 
400 static struct rtc_class_ops m41t80_rtc_ops = {
401 	.read_time = m41t80_rtc_read_time,
402 	.set_time = m41t80_rtc_set_time,
403 	.proc = m41t80_rtc_proc,
404 };
405 
406 #ifdef CONFIG_PM_SLEEP
407 static int m41t80_suspend(struct device *dev)
408 {
409 	struct i2c_client *client = to_i2c_client(dev);
410 
411 	if (client->irq >= 0 && device_may_wakeup(dev))
412 		enable_irq_wake(client->irq);
413 
414 	return 0;
415 }
416 
417 static int m41t80_resume(struct device *dev)
418 {
419 	struct i2c_client *client = to_i2c_client(dev);
420 
421 	if (client->irq >= 0 && device_may_wakeup(dev))
422 		disable_irq_wake(client->irq);
423 
424 	return 0;
425 }
426 #endif
427 
428 static SIMPLE_DEV_PM_OPS(m41t80_pm, m41t80_suspend, m41t80_resume);
429 
430 #ifdef CONFIG_COMMON_CLK
431 #define sqw_to_m41t80_data(_hw) container_of(_hw, struct m41t80_data, sqw)
432 
433 static unsigned long m41t80_decode_freq(int setting)
434 {
435 	return (setting == 0) ? 0 : (setting == 1) ? M41T80_SQW_MAX_FREQ :
436 		M41T80_SQW_MAX_FREQ >> setting;
437 }
438 
439 static unsigned long m41t80_get_freq(struct m41t80_data *m41t80)
440 {
441 	struct i2c_client *client = m41t80->client;
442 	int reg_sqw = (m41t80->features & M41T80_FEATURE_SQ_ALT) ?
443 		M41T80_REG_WDAY : M41T80_REG_SQW;
444 	int ret = i2c_smbus_read_byte_data(client, reg_sqw);
445 
446 	if (ret < 0)
447 		return 0;
448 	return m41t80_decode_freq(ret >> 4);
449 }
450 
451 static unsigned long m41t80_sqw_recalc_rate(struct clk_hw *hw,
452 					    unsigned long parent_rate)
453 {
454 	return sqw_to_m41t80_data(hw)->freq;
455 }
456 
457 static long m41t80_sqw_round_rate(struct clk_hw *hw, unsigned long rate,
458 				  unsigned long *prate)
459 {
460 	if (rate >= M41T80_SQW_MAX_FREQ)
461 		return M41T80_SQW_MAX_FREQ;
462 	if (rate >= M41T80_SQW_MAX_FREQ / 4)
463 		return M41T80_SQW_MAX_FREQ / 4;
464 	if (!rate)
465 		return 0;
466 	return 1 << ilog2(rate);
467 }
468 
469 static int m41t80_sqw_set_rate(struct clk_hw *hw, unsigned long rate,
470 			       unsigned long parent_rate)
471 {
472 	struct m41t80_data *m41t80 = sqw_to_m41t80_data(hw);
473 	struct i2c_client *client = m41t80->client;
474 	int reg_sqw = (m41t80->features & M41T80_FEATURE_SQ_ALT) ?
475 		M41T80_REG_WDAY : M41T80_REG_SQW;
476 	int reg, ret, val = 0;
477 
478 	if (rate >= M41T80_SQW_MAX_FREQ)
479 		val = 1;
480 	else if (rate >= M41T80_SQW_MAX_FREQ / 4)
481 		val = 2;
482 	else if (rate)
483 		val = 15 - ilog2(rate);
484 
485 	reg = i2c_smbus_read_byte_data(client, reg_sqw);
486 	if (reg < 0)
487 		return reg;
488 
489 	reg = (reg & 0x0f) | (val << 4);
490 
491 	ret = i2c_smbus_write_byte_data(client, reg_sqw, reg);
492 	if (!ret)
493 		m41t80->freq = m41t80_decode_freq(val);
494 	return ret;
495 }
496 
497 static int m41t80_sqw_control(struct clk_hw *hw, bool enable)
498 {
499 	struct m41t80_data *m41t80 = sqw_to_m41t80_data(hw);
500 	struct i2c_client *client = m41t80->client;
501 	int ret = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
502 
503 	if (ret < 0)
504 		return ret;
505 
506 	if (enable)
507 		ret |= M41T80_ALMON_SQWE;
508 	else
509 		ret &= ~M41T80_ALMON_SQWE;
510 
511 	ret = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, ret);
512 	if (!ret)
513 		m41t80->sqwe = enable;
514 	return ret;
515 }
516 
517 static int m41t80_sqw_prepare(struct clk_hw *hw)
518 {
519 	return m41t80_sqw_control(hw, 1);
520 }
521 
522 static void m41t80_sqw_unprepare(struct clk_hw *hw)
523 {
524 	m41t80_sqw_control(hw, 0);
525 }
526 
527 static int m41t80_sqw_is_prepared(struct clk_hw *hw)
528 {
529 	return sqw_to_m41t80_data(hw)->sqwe;
530 }
531 
532 static const struct clk_ops m41t80_sqw_ops = {
533 	.prepare = m41t80_sqw_prepare,
534 	.unprepare = m41t80_sqw_unprepare,
535 	.is_prepared = m41t80_sqw_is_prepared,
536 	.recalc_rate = m41t80_sqw_recalc_rate,
537 	.round_rate = m41t80_sqw_round_rate,
538 	.set_rate = m41t80_sqw_set_rate,
539 };
540 
541 static struct clk *m41t80_sqw_register_clk(struct m41t80_data *m41t80)
542 {
543 	struct i2c_client *client = m41t80->client;
544 	struct device_node *node = client->dev.of_node;
545 	struct clk *clk;
546 	struct clk_init_data init;
547 	int ret;
548 
549 	/* First disable the clock */
550 	ret = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
551 	if (ret < 0)
552 		return ERR_PTR(ret);
553 	ret = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
554 					ret & ~(M41T80_ALMON_SQWE));
555 	if (ret < 0)
556 		return ERR_PTR(ret);
557 
558 	init.name = "m41t80-sqw";
559 	init.ops = &m41t80_sqw_ops;
560 	init.flags = 0;
561 	init.parent_names = NULL;
562 	init.num_parents = 0;
563 	m41t80->sqw.init = &init;
564 	m41t80->freq = m41t80_get_freq(m41t80);
565 
566 	/* optional override of the clockname */
567 	of_property_read_string(node, "clock-output-names", &init.name);
568 
569 	/* register the clock */
570 	clk = clk_register(&client->dev, &m41t80->sqw);
571 	if (!IS_ERR(clk))
572 		of_clk_add_provider(node, of_clk_src_simple_get, clk);
573 
574 	return clk;
575 }
576 #endif
577 
578 #ifdef CONFIG_RTC_DRV_M41T80_WDT
579 /*
580  *****************************************************************************
581  *
582  * Watchdog Driver
583  *
584  *****************************************************************************
585  */
586 static DEFINE_MUTEX(m41t80_rtc_mutex);
587 static struct i2c_client *save_client;
588 
589 /* Default margin */
590 #define WD_TIMO 60		/* 1..31 seconds */
591 
592 static int wdt_margin = WD_TIMO;
593 module_param(wdt_margin, int, 0);
594 MODULE_PARM_DESC(wdt_margin, "Watchdog timeout in seconds (default 60s)");
595 
596 static unsigned long wdt_is_open;
597 static int boot_flag;
598 
599 /**
600  *	wdt_ping:
601  *
602  *	Reload counter one with the watchdog timeout. We don't bother reloading
603  *	the cascade counter.
604  */
605 static void wdt_ping(void)
606 {
607 	unsigned char i2c_data[2];
608 	struct i2c_msg msgs1[1] = {
609 		{
610 			.addr	= save_client->addr,
611 			.flags	= 0,
612 			.len	= 2,
613 			.buf	= i2c_data,
614 		},
615 	};
616 	struct m41t80_data *clientdata = i2c_get_clientdata(save_client);
617 
618 	i2c_data[0] = 0x09;		/* watchdog register */
619 
620 	if (wdt_margin > 31)
621 		i2c_data[1] = (wdt_margin & 0xFC) | 0x83; /* resolution = 4s */
622 	else
623 		/*
624 		 * WDS = 1 (0x80), mulitplier = WD_TIMO, resolution = 1s (0x02)
625 		 */
626 		i2c_data[1] = wdt_margin << 2 | 0x82;
627 
628 	/*
629 	 * M41T65 has three bits for watchdog resolution.  Don't set bit 7, as
630 	 * that would be an invalid resolution.
631 	 */
632 	if (clientdata->features & M41T80_FEATURE_WD)
633 		i2c_data[1] &= ~M41T80_WATCHDOG_RB2;
634 
635 	i2c_transfer(save_client->adapter, msgs1, 1);
636 }
637 
638 /**
639  *	wdt_disable:
640  *
641  *	disables watchdog.
642  */
643 static void wdt_disable(void)
644 {
645 	unsigned char i2c_data[2], i2c_buf[0x10];
646 	struct i2c_msg msgs0[2] = {
647 		{
648 			.addr	= save_client->addr,
649 			.flags	= 0,
650 			.len	= 1,
651 			.buf	= i2c_data,
652 		},
653 		{
654 			.addr	= save_client->addr,
655 			.flags	= I2C_M_RD,
656 			.len	= 1,
657 			.buf	= i2c_buf,
658 		},
659 	};
660 	struct i2c_msg msgs1[1] = {
661 		{
662 			.addr	= save_client->addr,
663 			.flags	= 0,
664 			.len	= 2,
665 			.buf	= i2c_data,
666 		},
667 	};
668 
669 	i2c_data[0] = 0x09;
670 	i2c_transfer(save_client->adapter, msgs0, 2);
671 
672 	i2c_data[0] = 0x09;
673 	i2c_data[1] = 0x00;
674 	i2c_transfer(save_client->adapter, msgs1, 1);
675 }
676 
677 /**
678  *	wdt_write:
679  *	@file: file handle to the watchdog
680  *	@buf: buffer to write (unused as data does not matter here
681  *	@count: count of bytes
682  *	@ppos: pointer to the position to write. No seeks allowed
683  *
684  *	A write to a watchdog device is defined as a keepalive signal. Any
685  *	write of data will do, as we we don't define content meaning.
686  */
687 static ssize_t wdt_write(struct file *file, const char __user *buf,
688 			 size_t count, loff_t *ppos)
689 {
690 	if (count) {
691 		wdt_ping();
692 		return 1;
693 	}
694 	return 0;
695 }
696 
697 static ssize_t wdt_read(struct file *file, char __user *buf,
698 			size_t count, loff_t *ppos)
699 {
700 	return 0;
701 }
702 
703 /**
704  *	wdt_ioctl:
705  *	@file: file handle to the device
706  *	@cmd: watchdog command
707  *	@arg: argument pointer
708  *
709  *	The watchdog API defines a common set of functions for all watchdogs
710  *	according to their available features. We only actually usefully support
711  *	querying capabilities and current status.
712  */
713 static int wdt_ioctl(struct file *file, unsigned int cmd,
714 		     unsigned long arg)
715 {
716 	int new_margin, rv;
717 	static struct watchdog_info ident = {
718 		.options = WDIOF_POWERUNDER | WDIOF_KEEPALIVEPING |
719 			WDIOF_SETTIMEOUT,
720 		.firmware_version = 1,
721 		.identity = "M41T80 WTD"
722 	};
723 
724 	switch (cmd) {
725 	case WDIOC_GETSUPPORT:
726 		return copy_to_user((struct watchdog_info __user *)arg, &ident,
727 				    sizeof(ident)) ? -EFAULT : 0;
728 
729 	case WDIOC_GETSTATUS:
730 	case WDIOC_GETBOOTSTATUS:
731 		return put_user(boot_flag, (int __user *)arg);
732 	case WDIOC_KEEPALIVE:
733 		wdt_ping();
734 		return 0;
735 	case WDIOC_SETTIMEOUT:
736 		if (get_user(new_margin, (int __user *)arg))
737 			return -EFAULT;
738 		/* Arbitrary, can't find the card's limits */
739 		if (new_margin < 1 || new_margin > 124)
740 			return -EINVAL;
741 		wdt_margin = new_margin;
742 		wdt_ping();
743 		/* Fall through */
744 	case WDIOC_GETTIMEOUT:
745 		return put_user(wdt_margin, (int __user *)arg);
746 
747 	case WDIOC_SETOPTIONS:
748 		if (copy_from_user(&rv, (int __user *)arg, sizeof(int)))
749 			return -EFAULT;
750 
751 		if (rv & WDIOS_DISABLECARD) {
752 			pr_info("disable watchdog\n");
753 			wdt_disable();
754 		}
755 
756 		if (rv & WDIOS_ENABLECARD) {
757 			pr_info("enable watchdog\n");
758 			wdt_ping();
759 		}
760 
761 		return -EINVAL;
762 	}
763 	return -ENOTTY;
764 }
765 
766 static long wdt_unlocked_ioctl(struct file *file, unsigned int cmd,
767 			       unsigned long arg)
768 {
769 	int ret;
770 
771 	mutex_lock(&m41t80_rtc_mutex);
772 	ret = wdt_ioctl(file, cmd, arg);
773 	mutex_unlock(&m41t80_rtc_mutex);
774 
775 	return ret;
776 }
777 
778 /**
779  *	wdt_open:
780  *	@inode: inode of device
781  *	@file: file handle to device
782  *
783  */
784 static int wdt_open(struct inode *inode, struct file *file)
785 {
786 	if (MINOR(inode->i_rdev) == WATCHDOG_MINOR) {
787 		mutex_lock(&m41t80_rtc_mutex);
788 		if (test_and_set_bit(0, &wdt_is_open)) {
789 			mutex_unlock(&m41t80_rtc_mutex);
790 			return -EBUSY;
791 		}
792 		/*
793 		 *	Activate
794 		 */
795 		wdt_is_open = 1;
796 		mutex_unlock(&m41t80_rtc_mutex);
797 		return stream_open(inode, file);
798 	}
799 	return -ENODEV;
800 }
801 
802 /**
803  *	wdt_close:
804  *	@inode: inode to board
805  *	@file: file handle to board
806  *
807  */
808 static int wdt_release(struct inode *inode, struct file *file)
809 {
810 	if (MINOR(inode->i_rdev) == WATCHDOG_MINOR)
811 		clear_bit(0, &wdt_is_open);
812 	return 0;
813 }
814 
815 /**
816  *	notify_sys:
817  *	@this: our notifier block
818  *	@code: the event being reported
819  *	@unused: unused
820  *
821  *	Our notifier is called on system shutdowns. We want to turn the card
822  *	off at reboot otherwise the machine will reboot again during memory
823  *	test or worse yet during the following fsck. This would suck, in fact
824  *	trust me - if it happens it does suck.
825  */
826 static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
827 			  void *unused)
828 {
829 	if (code == SYS_DOWN || code == SYS_HALT)
830 		/* Disable Watchdog */
831 		wdt_disable();
832 	return NOTIFY_DONE;
833 }
834 
835 static const struct file_operations wdt_fops = {
836 	.owner	= THIS_MODULE,
837 	.read	= wdt_read,
838 	.unlocked_ioctl = wdt_unlocked_ioctl,
839 	.compat_ioctl = compat_ptr_ioctl,
840 	.write	= wdt_write,
841 	.open	= wdt_open,
842 	.release = wdt_release,
843 	.llseek = no_llseek,
844 };
845 
846 static struct miscdevice wdt_dev = {
847 	.minor = WATCHDOG_MINOR,
848 	.name = "watchdog",
849 	.fops = &wdt_fops,
850 };
851 
852 /*
853  *	The WDT card needs to learn about soft shutdowns in order to
854  *	turn the timebomb registers off.
855  */
856 static struct notifier_block wdt_notifier = {
857 	.notifier_call = wdt_notify_sys,
858 };
859 #endif /* CONFIG_RTC_DRV_M41T80_WDT */
860 
861 /*
862  *****************************************************************************
863  *
864  *	Driver Interface
865  *
866  *****************************************************************************
867  */
868 
869 static int m41t80_probe(struct i2c_client *client,
870 			const struct i2c_device_id *id)
871 {
872 	struct i2c_adapter *adapter = client->adapter;
873 	int rc = 0;
874 	struct rtc_time tm;
875 	struct m41t80_data *m41t80_data = NULL;
876 	bool wakeup_source = false;
877 
878 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK |
879 				     I2C_FUNC_SMBUS_BYTE_DATA)) {
880 		dev_err(&adapter->dev, "doesn't support I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_I2C_BLOCK\n");
881 		return -ENODEV;
882 	}
883 
884 	m41t80_data = devm_kzalloc(&client->dev, sizeof(*m41t80_data),
885 				   GFP_KERNEL);
886 	if (!m41t80_data)
887 		return -ENOMEM;
888 
889 	m41t80_data->client = client;
890 	if (client->dev.of_node)
891 		m41t80_data->features = (unsigned long)
892 			of_device_get_match_data(&client->dev);
893 	else
894 		m41t80_data->features = id->driver_data;
895 	i2c_set_clientdata(client, m41t80_data);
896 
897 	m41t80_data->rtc =  devm_rtc_allocate_device(&client->dev);
898 	if (IS_ERR(m41t80_data->rtc))
899 		return PTR_ERR(m41t80_data->rtc);
900 
901 #ifdef CONFIG_OF
902 	wakeup_source = of_property_read_bool(client->dev.of_node,
903 					      "wakeup-source");
904 #endif
905 	if (client->irq > 0) {
906 		rc = devm_request_threaded_irq(&client->dev, client->irq,
907 					       NULL, m41t80_handle_irq,
908 					       IRQF_TRIGGER_LOW | IRQF_ONESHOT,
909 					       "m41t80", client);
910 		if (rc) {
911 			dev_warn(&client->dev, "unable to request IRQ, alarms disabled\n");
912 			client->irq = 0;
913 			wakeup_source = false;
914 		}
915 	}
916 	if (client->irq > 0 || wakeup_source) {
917 		m41t80_rtc_ops.read_alarm = m41t80_read_alarm;
918 		m41t80_rtc_ops.set_alarm = m41t80_set_alarm;
919 		m41t80_rtc_ops.alarm_irq_enable = m41t80_alarm_irq_enable;
920 		/* Enable the wakealarm */
921 		device_init_wakeup(&client->dev, true);
922 	}
923 
924 	m41t80_data->rtc->ops = &m41t80_rtc_ops;
925 	m41t80_data->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
926 	m41t80_data->rtc->range_max = RTC_TIMESTAMP_END_2099;
927 
928 	if (client->irq <= 0) {
929 		/* We cannot support UIE mode if we do not have an IRQ line */
930 		m41t80_data->rtc->uie_unsupported = 1;
931 	}
932 
933 	/* Make sure HT (Halt Update) bit is cleared */
934 	rc = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_HOUR);
935 
936 	if (rc >= 0 && rc & M41T80_ALHOUR_HT) {
937 		if (m41t80_data->features & M41T80_FEATURE_HT) {
938 			m41t80_rtc_read_time(&client->dev, &tm);
939 			dev_info(&client->dev, "HT bit was set!\n");
940 			dev_info(&client->dev, "Power Down at %ptR\n", &tm);
941 		}
942 		rc = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_HOUR,
943 					       rc & ~M41T80_ALHOUR_HT);
944 	}
945 
946 	if (rc < 0) {
947 		dev_err(&client->dev, "Can't clear HT bit\n");
948 		return rc;
949 	}
950 
951 	/* Make sure ST (stop) bit is cleared */
952 	rc = i2c_smbus_read_byte_data(client, M41T80_REG_SEC);
953 
954 	if (rc >= 0 && rc & M41T80_SEC_ST)
955 		rc = i2c_smbus_write_byte_data(client, M41T80_REG_SEC,
956 					       rc & ~M41T80_SEC_ST);
957 	if (rc < 0) {
958 		dev_err(&client->dev, "Can't clear ST bit\n");
959 		return rc;
960 	}
961 
962 #ifdef CONFIG_RTC_DRV_M41T80_WDT
963 	if (m41t80_data->features & M41T80_FEATURE_HT) {
964 		save_client = client;
965 		rc = misc_register(&wdt_dev);
966 		if (rc)
967 			return rc;
968 		rc = register_reboot_notifier(&wdt_notifier);
969 		if (rc) {
970 			misc_deregister(&wdt_dev);
971 			return rc;
972 		}
973 	}
974 #endif
975 #ifdef CONFIG_COMMON_CLK
976 	if (m41t80_data->features & M41T80_FEATURE_SQ)
977 		m41t80_sqw_register_clk(m41t80_data);
978 #endif
979 
980 	rc = rtc_register_device(m41t80_data->rtc);
981 	if (rc)
982 		return rc;
983 
984 	return 0;
985 }
986 
987 static int m41t80_remove(struct i2c_client *client)
988 {
989 #ifdef CONFIG_RTC_DRV_M41T80_WDT
990 	struct m41t80_data *clientdata = i2c_get_clientdata(client);
991 
992 	if (clientdata->features & M41T80_FEATURE_HT) {
993 		misc_deregister(&wdt_dev);
994 		unregister_reboot_notifier(&wdt_notifier);
995 	}
996 #endif
997 
998 	return 0;
999 }
1000 
1001 static struct i2c_driver m41t80_driver = {
1002 	.driver = {
1003 		.name = "rtc-m41t80",
1004 		.of_match_table = of_match_ptr(m41t80_of_match),
1005 		.pm = &m41t80_pm,
1006 	},
1007 	.probe = m41t80_probe,
1008 	.remove = m41t80_remove,
1009 	.id_table = m41t80_id,
1010 };
1011 
1012 module_i2c_driver(m41t80_driver);
1013 
1014 MODULE_AUTHOR("Alexander Bigga <ab@mycable.de>");
1015 MODULE_DESCRIPTION("ST Microelectronics M41T80 series RTC I2C Client Driver");
1016 MODULE_LICENSE("GPL");
1017