xref: /openbmc/linux/drivers/rtc/rtc-m41t80.c (revision 710b797c)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * I2C client/driver for the ST M41T80 family of i2c rtc chips.
4  *
5  * Author: Alexander Bigga <ab@mycable.de>
6  *
7  * Based on m41t00.c by Mark A. Greer <mgreer@mvista.com>
8  *
9  * 2006 (c) mycable GmbH
10  */
11 
12 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
13 
14 #include <linux/bcd.h>
15 #include <linux/clk-provider.h>
16 #include <linux/i2c.h>
17 #include <linux/init.h>
18 #include <linux/kernel.h>
19 #include <linux/module.h>
20 #include <linux/of_device.h>
21 #include <linux/rtc.h>
22 #include <linux/slab.h>
23 #include <linux/mutex.h>
24 #include <linux/string.h>
25 #ifdef CONFIG_RTC_DRV_M41T80_WDT
26 #include <linux/fs.h>
27 #include <linux/ioctl.h>
28 #include <linux/miscdevice.h>
29 #include <linux/reboot.h>
30 #include <linux/watchdog.h>
31 #endif
32 
33 #define M41T80_REG_SSEC		0x00
34 #define M41T80_REG_SEC		0x01
35 #define M41T80_REG_MIN		0x02
36 #define M41T80_REG_HOUR		0x03
37 #define M41T80_REG_WDAY		0x04
38 #define M41T80_REG_DAY		0x05
39 #define M41T80_REG_MON		0x06
40 #define M41T80_REG_YEAR		0x07
41 #define M41T80_REG_ALARM_MON	0x0a
42 #define M41T80_REG_ALARM_DAY	0x0b
43 #define M41T80_REG_ALARM_HOUR	0x0c
44 #define M41T80_REG_ALARM_MIN	0x0d
45 #define M41T80_REG_ALARM_SEC	0x0e
46 #define M41T80_REG_FLAGS	0x0f
47 #define M41T80_REG_SQW		0x13
48 
49 #define M41T80_DATETIME_REG_SIZE	(M41T80_REG_YEAR + 1)
50 #define M41T80_ALARM_REG_SIZE	\
51 	(M41T80_REG_ALARM_SEC + 1 - M41T80_REG_ALARM_MON)
52 
53 #define M41T80_SQW_MAX_FREQ	32768
54 
55 #define M41T80_SEC_ST		BIT(7)	/* ST: Stop Bit */
56 #define M41T80_ALMON_AFE	BIT(7)	/* AFE: AF Enable Bit */
57 #define M41T80_ALMON_SQWE	BIT(6)	/* SQWE: SQW Enable Bit */
58 #define M41T80_ALHOUR_HT	BIT(6)	/* HT: Halt Update Bit */
59 #define M41T80_FLAGS_OF		BIT(2)	/* OF: Oscillator Failure Bit */
60 #define M41T80_FLAGS_AF		BIT(6)	/* AF: Alarm Flag Bit */
61 #define M41T80_FLAGS_BATT_LOW	BIT(4)	/* BL: Battery Low Bit */
62 #define M41T80_WATCHDOG_RB2	BIT(7)	/* RB: Watchdog resolution */
63 #define M41T80_WATCHDOG_RB1	BIT(1)	/* RB: Watchdog resolution */
64 #define M41T80_WATCHDOG_RB0	BIT(0)	/* RB: Watchdog resolution */
65 
66 #define M41T80_FEATURE_HT	BIT(0)	/* Halt feature */
67 #define M41T80_FEATURE_BL	BIT(1)	/* Battery low indicator */
68 #define M41T80_FEATURE_SQ	BIT(2)	/* Squarewave feature */
69 #define M41T80_FEATURE_WD	BIT(3)	/* Extra watchdog resolution */
70 #define M41T80_FEATURE_SQ_ALT	BIT(4)	/* RSx bits are in reg 4 */
71 
72 static const struct i2c_device_id m41t80_id[] = {
73 	{ "m41t62", M41T80_FEATURE_SQ | M41T80_FEATURE_SQ_ALT },
74 	{ "m41t65", M41T80_FEATURE_HT | M41T80_FEATURE_WD },
75 	{ "m41t80", M41T80_FEATURE_SQ },
76 	{ "m41t81", M41T80_FEATURE_HT | M41T80_FEATURE_SQ},
77 	{ "m41t81s", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
78 	{ "m41t82", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
79 	{ "m41t83", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
80 	{ "m41st84", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
81 	{ "m41st85", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
82 	{ "m41st87", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
83 	{ "rv4162", M41T80_FEATURE_SQ | M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT },
84 	{ }
85 };
86 MODULE_DEVICE_TABLE(i2c, m41t80_id);
87 
88 static const __maybe_unused struct of_device_id m41t80_of_match[] = {
89 	{
90 		.compatible = "st,m41t62",
91 		.data = (void *)(M41T80_FEATURE_SQ | M41T80_FEATURE_SQ_ALT)
92 	},
93 	{
94 		.compatible = "st,m41t65",
95 		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_WD)
96 	},
97 	{
98 		.compatible = "st,m41t80",
99 		.data = (void *)(M41T80_FEATURE_SQ)
100 	},
101 	{
102 		.compatible = "st,m41t81",
103 		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_SQ)
104 	},
105 	{
106 		.compatible = "st,m41t81s",
107 		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
108 	},
109 	{
110 		.compatible = "st,m41t82",
111 		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
112 	},
113 	{
114 		.compatible = "st,m41t83",
115 		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
116 	},
117 	{
118 		.compatible = "st,m41t84",
119 		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
120 	},
121 	{
122 		.compatible = "st,m41t85",
123 		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
124 	},
125 	{
126 		.compatible = "st,m41t87",
127 		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
128 	},
129 	{
130 		.compatible = "microcrystal,rv4162",
131 		.data = (void *)(M41T80_FEATURE_SQ | M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT)
132 	},
133 	/* DT compatibility only, do not use compatibles below: */
134 	{
135 		.compatible = "st,rv4162",
136 		.data = (void *)(M41T80_FEATURE_SQ | M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT)
137 	},
138 	{
139 		.compatible = "rv4162",
140 		.data = (void *)(M41T80_FEATURE_SQ | M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT)
141 	},
142 	{ }
143 };
144 MODULE_DEVICE_TABLE(of, m41t80_of_match);
145 
146 struct m41t80_data {
147 	unsigned long features;
148 	struct i2c_client *client;
149 	struct rtc_device *rtc;
150 #ifdef CONFIG_COMMON_CLK
151 	struct clk_hw sqw;
152 	unsigned long freq;
153 	unsigned int sqwe;
154 #endif
155 };
156 
157 static irqreturn_t m41t80_handle_irq(int irq, void *dev_id)
158 {
159 	struct i2c_client *client = dev_id;
160 	struct m41t80_data *m41t80 = i2c_get_clientdata(client);
161 	unsigned long events = 0;
162 	int flags, flags_afe;
163 
164 	rtc_lock(m41t80->rtc);
165 
166 	flags_afe = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
167 	if (flags_afe < 0) {
168 		rtc_unlock(m41t80->rtc);
169 		return IRQ_NONE;
170 	}
171 
172 	flags = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
173 	if (flags <= 0) {
174 		rtc_unlock(m41t80->rtc);
175 		return IRQ_NONE;
176 	}
177 
178 	if (flags & M41T80_FLAGS_AF) {
179 		flags &= ~M41T80_FLAGS_AF;
180 		flags_afe &= ~M41T80_ALMON_AFE;
181 		events |= RTC_AF;
182 	}
183 
184 	if (events) {
185 		rtc_update_irq(m41t80->rtc, 1, events);
186 		i2c_smbus_write_byte_data(client, M41T80_REG_FLAGS, flags);
187 		i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
188 					  flags_afe);
189 	}
190 
191 	rtc_unlock(m41t80->rtc);
192 
193 	return IRQ_HANDLED;
194 }
195 
196 static int m41t80_rtc_read_time(struct device *dev, struct rtc_time *tm)
197 {
198 	struct i2c_client *client = to_i2c_client(dev);
199 	unsigned char buf[8];
200 	int err, flags;
201 
202 	flags = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
203 	if (flags < 0)
204 		return flags;
205 
206 	if (flags & M41T80_FLAGS_OF) {
207 		dev_err(&client->dev, "Oscillator failure, data is invalid.\n");
208 		return -EINVAL;
209 	}
210 
211 	err = i2c_smbus_read_i2c_block_data(client, M41T80_REG_SSEC,
212 					    sizeof(buf), buf);
213 	if (err < 0) {
214 		dev_err(&client->dev, "Unable to read date\n");
215 		return err;
216 	}
217 
218 	tm->tm_sec = bcd2bin(buf[M41T80_REG_SEC] & 0x7f);
219 	tm->tm_min = bcd2bin(buf[M41T80_REG_MIN] & 0x7f);
220 	tm->tm_hour = bcd2bin(buf[M41T80_REG_HOUR] & 0x3f);
221 	tm->tm_mday = bcd2bin(buf[M41T80_REG_DAY] & 0x3f);
222 	tm->tm_wday = buf[M41T80_REG_WDAY] & 0x07;
223 	tm->tm_mon = bcd2bin(buf[M41T80_REG_MON] & 0x1f) - 1;
224 
225 	/* assume 20YY not 19YY, and ignore the Century Bit */
226 	tm->tm_year = bcd2bin(buf[M41T80_REG_YEAR]) + 100;
227 	return 0;
228 }
229 
230 static int m41t80_rtc_set_time(struct device *dev, struct rtc_time *tm)
231 {
232 	struct i2c_client *client = to_i2c_client(dev);
233 	struct m41t80_data *clientdata = i2c_get_clientdata(client);
234 	unsigned char buf[8];
235 	int err, flags;
236 
237 	buf[M41T80_REG_SSEC] = 0;
238 	buf[M41T80_REG_SEC] = bin2bcd(tm->tm_sec);
239 	buf[M41T80_REG_MIN] = bin2bcd(tm->tm_min);
240 	buf[M41T80_REG_HOUR] = bin2bcd(tm->tm_hour);
241 	buf[M41T80_REG_DAY] = bin2bcd(tm->tm_mday);
242 	buf[M41T80_REG_MON] = bin2bcd(tm->tm_mon + 1);
243 	buf[M41T80_REG_YEAR] = bin2bcd(tm->tm_year - 100);
244 	buf[M41T80_REG_WDAY] = tm->tm_wday;
245 
246 	/* If the square wave output is controlled in the weekday register */
247 	if (clientdata->features & M41T80_FEATURE_SQ_ALT) {
248 		int val;
249 
250 		val = i2c_smbus_read_byte_data(client, M41T80_REG_WDAY);
251 		if (val < 0)
252 			return val;
253 
254 		buf[M41T80_REG_WDAY] |= (val & 0xf0);
255 	}
256 
257 	err = i2c_smbus_write_i2c_block_data(client, M41T80_REG_SSEC,
258 					     sizeof(buf), buf);
259 	if (err < 0) {
260 		dev_err(&client->dev, "Unable to write to date registers\n");
261 		return err;
262 	}
263 
264 	/* Clear the OF bit of Flags Register */
265 	flags = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
266 	if (flags < 0)
267 		return flags;
268 
269 	err = i2c_smbus_write_byte_data(client, M41T80_REG_FLAGS,
270 					flags & ~M41T80_FLAGS_OF);
271 	if (err < 0) {
272 		dev_err(&client->dev, "Unable to write flags register\n");
273 		return err;
274 	}
275 
276 	return err;
277 }
278 
279 static int m41t80_rtc_proc(struct device *dev, struct seq_file *seq)
280 {
281 	struct i2c_client *client = to_i2c_client(dev);
282 	struct m41t80_data *clientdata = i2c_get_clientdata(client);
283 	int reg;
284 
285 	if (clientdata->features & M41T80_FEATURE_BL) {
286 		reg = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
287 		if (reg < 0)
288 			return reg;
289 		seq_printf(seq, "battery\t\t: %s\n",
290 			   (reg & M41T80_FLAGS_BATT_LOW) ? "exhausted" : "ok");
291 	}
292 	return 0;
293 }
294 
295 static int m41t80_alarm_irq_enable(struct device *dev, unsigned int enabled)
296 {
297 	struct i2c_client *client = to_i2c_client(dev);
298 	int flags, retval;
299 
300 	flags = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
301 	if (flags < 0)
302 		return flags;
303 
304 	if (enabled)
305 		flags |= M41T80_ALMON_AFE;
306 	else
307 		flags &= ~M41T80_ALMON_AFE;
308 
309 	retval = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, flags);
310 	if (retval < 0) {
311 		dev_err(dev, "Unable to enable alarm IRQ %d\n", retval);
312 		return retval;
313 	}
314 	return 0;
315 }
316 
317 static int m41t80_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
318 {
319 	struct i2c_client *client = to_i2c_client(dev);
320 	u8 alarmvals[5];
321 	int ret, err;
322 
323 	alarmvals[0] = bin2bcd(alrm->time.tm_mon + 1);
324 	alarmvals[1] = bin2bcd(alrm->time.tm_mday);
325 	alarmvals[2] = bin2bcd(alrm->time.tm_hour);
326 	alarmvals[3] = bin2bcd(alrm->time.tm_min);
327 	alarmvals[4] = bin2bcd(alrm->time.tm_sec);
328 
329 	/* Clear AF and AFE flags */
330 	ret = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
331 	if (ret < 0)
332 		return ret;
333 	err = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
334 					ret & ~(M41T80_ALMON_AFE));
335 	if (err < 0) {
336 		dev_err(dev, "Unable to clear AFE bit\n");
337 		return err;
338 	}
339 
340 	/* Keep SQWE bit value */
341 	alarmvals[0] |= (ret & M41T80_ALMON_SQWE);
342 
343 	ret = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
344 	if (ret < 0)
345 		return ret;
346 
347 	err = i2c_smbus_write_byte_data(client, M41T80_REG_FLAGS,
348 					ret & ~(M41T80_FLAGS_AF));
349 	if (err < 0) {
350 		dev_err(dev, "Unable to clear AF bit\n");
351 		return err;
352 	}
353 
354 	/* Write the alarm */
355 	err = i2c_smbus_write_i2c_block_data(client, M41T80_REG_ALARM_MON,
356 					     5, alarmvals);
357 	if (err)
358 		return err;
359 
360 	/* Enable the alarm interrupt */
361 	if (alrm->enabled) {
362 		alarmvals[0] |= M41T80_ALMON_AFE;
363 		err = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
364 						alarmvals[0]);
365 		if (err)
366 			return err;
367 	}
368 
369 	return 0;
370 }
371 
372 static int m41t80_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
373 {
374 	struct i2c_client *client = to_i2c_client(dev);
375 	u8 alarmvals[5];
376 	int flags, ret;
377 
378 	ret = i2c_smbus_read_i2c_block_data(client, M41T80_REG_ALARM_MON,
379 					    5, alarmvals);
380 	if (ret != 5)
381 		return ret < 0 ? ret : -EIO;
382 
383 	flags = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
384 	if (flags < 0)
385 		return flags;
386 
387 	alrm->time.tm_sec  = bcd2bin(alarmvals[4] & 0x7f);
388 	alrm->time.tm_min  = bcd2bin(alarmvals[3] & 0x7f);
389 	alrm->time.tm_hour = bcd2bin(alarmvals[2] & 0x3f);
390 	alrm->time.tm_mday = bcd2bin(alarmvals[1] & 0x3f);
391 	alrm->time.tm_mon  = bcd2bin(alarmvals[0] & 0x3f) - 1;
392 
393 	alrm->enabled = !!(alarmvals[0] & M41T80_ALMON_AFE);
394 	alrm->pending = (flags & M41T80_FLAGS_AF) && alrm->enabled;
395 
396 	return 0;
397 }
398 
399 static const struct rtc_class_ops m41t80_rtc_ops = {
400 	.read_time = m41t80_rtc_read_time,
401 	.set_time = m41t80_rtc_set_time,
402 	.proc = m41t80_rtc_proc,
403 	.read_alarm = m41t80_read_alarm,
404 	.set_alarm = m41t80_set_alarm,
405 	.alarm_irq_enable = m41t80_alarm_irq_enable,
406 };
407 
408 #ifdef CONFIG_PM_SLEEP
409 static int m41t80_suspend(struct device *dev)
410 {
411 	struct i2c_client *client = to_i2c_client(dev);
412 
413 	if (client->irq >= 0 && device_may_wakeup(dev))
414 		enable_irq_wake(client->irq);
415 
416 	return 0;
417 }
418 
419 static int m41t80_resume(struct device *dev)
420 {
421 	struct i2c_client *client = to_i2c_client(dev);
422 
423 	if (client->irq >= 0 && device_may_wakeup(dev))
424 		disable_irq_wake(client->irq);
425 
426 	return 0;
427 }
428 #endif
429 
430 static SIMPLE_DEV_PM_OPS(m41t80_pm, m41t80_suspend, m41t80_resume);
431 
432 #ifdef CONFIG_COMMON_CLK
433 #define sqw_to_m41t80_data(_hw) container_of(_hw, struct m41t80_data, sqw)
434 
435 static unsigned long m41t80_decode_freq(int setting)
436 {
437 	return (setting == 0) ? 0 : (setting == 1) ? M41T80_SQW_MAX_FREQ :
438 		M41T80_SQW_MAX_FREQ >> setting;
439 }
440 
441 static unsigned long m41t80_get_freq(struct m41t80_data *m41t80)
442 {
443 	struct i2c_client *client = m41t80->client;
444 	int reg_sqw = (m41t80->features & M41T80_FEATURE_SQ_ALT) ?
445 		M41T80_REG_WDAY : M41T80_REG_SQW;
446 	int ret = i2c_smbus_read_byte_data(client, reg_sqw);
447 
448 	if (ret < 0)
449 		return 0;
450 	return m41t80_decode_freq(ret >> 4);
451 }
452 
453 static unsigned long m41t80_sqw_recalc_rate(struct clk_hw *hw,
454 					    unsigned long parent_rate)
455 {
456 	return sqw_to_m41t80_data(hw)->freq;
457 }
458 
459 static long m41t80_sqw_round_rate(struct clk_hw *hw, unsigned long rate,
460 				  unsigned long *prate)
461 {
462 	if (rate >= M41T80_SQW_MAX_FREQ)
463 		return M41T80_SQW_MAX_FREQ;
464 	if (rate >= M41T80_SQW_MAX_FREQ / 4)
465 		return M41T80_SQW_MAX_FREQ / 4;
466 	if (!rate)
467 		return 0;
468 	return 1 << ilog2(rate);
469 }
470 
471 static int m41t80_sqw_set_rate(struct clk_hw *hw, unsigned long rate,
472 			       unsigned long parent_rate)
473 {
474 	struct m41t80_data *m41t80 = sqw_to_m41t80_data(hw);
475 	struct i2c_client *client = m41t80->client;
476 	int reg_sqw = (m41t80->features & M41T80_FEATURE_SQ_ALT) ?
477 		M41T80_REG_WDAY : M41T80_REG_SQW;
478 	int reg, ret, val = 0;
479 
480 	if (rate >= M41T80_SQW_MAX_FREQ)
481 		val = 1;
482 	else if (rate >= M41T80_SQW_MAX_FREQ / 4)
483 		val = 2;
484 	else if (rate)
485 		val = 15 - ilog2(rate);
486 
487 	reg = i2c_smbus_read_byte_data(client, reg_sqw);
488 	if (reg < 0)
489 		return reg;
490 
491 	reg = (reg & 0x0f) | (val << 4);
492 
493 	ret = i2c_smbus_write_byte_data(client, reg_sqw, reg);
494 	if (!ret)
495 		m41t80->freq = m41t80_decode_freq(val);
496 	return ret;
497 }
498 
499 static int m41t80_sqw_control(struct clk_hw *hw, bool enable)
500 {
501 	struct m41t80_data *m41t80 = sqw_to_m41t80_data(hw);
502 	struct i2c_client *client = m41t80->client;
503 	int ret = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
504 
505 	if (ret < 0)
506 		return ret;
507 
508 	if (enable)
509 		ret |= M41T80_ALMON_SQWE;
510 	else
511 		ret &= ~M41T80_ALMON_SQWE;
512 
513 	ret = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, ret);
514 	if (!ret)
515 		m41t80->sqwe = enable;
516 	return ret;
517 }
518 
519 static int m41t80_sqw_prepare(struct clk_hw *hw)
520 {
521 	return m41t80_sqw_control(hw, 1);
522 }
523 
524 static void m41t80_sqw_unprepare(struct clk_hw *hw)
525 {
526 	m41t80_sqw_control(hw, 0);
527 }
528 
529 static int m41t80_sqw_is_prepared(struct clk_hw *hw)
530 {
531 	return sqw_to_m41t80_data(hw)->sqwe;
532 }
533 
534 static const struct clk_ops m41t80_sqw_ops = {
535 	.prepare = m41t80_sqw_prepare,
536 	.unprepare = m41t80_sqw_unprepare,
537 	.is_prepared = m41t80_sqw_is_prepared,
538 	.recalc_rate = m41t80_sqw_recalc_rate,
539 	.round_rate = m41t80_sqw_round_rate,
540 	.set_rate = m41t80_sqw_set_rate,
541 };
542 
543 static struct clk *m41t80_sqw_register_clk(struct m41t80_data *m41t80)
544 {
545 	struct i2c_client *client = m41t80->client;
546 	struct device_node *node = client->dev.of_node;
547 	struct clk *clk;
548 	struct clk_init_data init;
549 	int ret;
550 
551 	/* First disable the clock */
552 	ret = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
553 	if (ret < 0)
554 		return ERR_PTR(ret);
555 	ret = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
556 					ret & ~(M41T80_ALMON_SQWE));
557 	if (ret < 0)
558 		return ERR_PTR(ret);
559 
560 	init.name = "m41t80-sqw";
561 	init.ops = &m41t80_sqw_ops;
562 	init.flags = 0;
563 	init.parent_names = NULL;
564 	init.num_parents = 0;
565 	m41t80->sqw.init = &init;
566 	m41t80->freq = m41t80_get_freq(m41t80);
567 
568 	/* optional override of the clockname */
569 	of_property_read_string(node, "clock-output-names", &init.name);
570 
571 	/* register the clock */
572 	clk = clk_register(&client->dev, &m41t80->sqw);
573 	if (!IS_ERR(clk))
574 		of_clk_add_provider(node, of_clk_src_simple_get, clk);
575 
576 	return clk;
577 }
578 #endif
579 
580 #ifdef CONFIG_RTC_DRV_M41T80_WDT
581 /*
582  *****************************************************************************
583  *
584  * Watchdog Driver
585  *
586  *****************************************************************************
587  */
588 static DEFINE_MUTEX(m41t80_rtc_mutex);
589 static struct i2c_client *save_client;
590 
591 /* Default margin */
592 #define WD_TIMO 60		/* 1..31 seconds */
593 
594 static int wdt_margin = WD_TIMO;
595 module_param(wdt_margin, int, 0);
596 MODULE_PARM_DESC(wdt_margin, "Watchdog timeout in seconds (default 60s)");
597 
598 static unsigned long wdt_is_open;
599 static int boot_flag;
600 
601 /**
602  *	wdt_ping:
603  *
604  *	Reload counter one with the watchdog timeout. We don't bother reloading
605  *	the cascade counter.
606  */
607 static void wdt_ping(void)
608 {
609 	unsigned char i2c_data[2];
610 	struct i2c_msg msgs1[1] = {
611 		{
612 			.addr	= save_client->addr,
613 			.flags	= 0,
614 			.len	= 2,
615 			.buf	= i2c_data,
616 		},
617 	};
618 	struct m41t80_data *clientdata = i2c_get_clientdata(save_client);
619 
620 	i2c_data[0] = 0x09;		/* watchdog register */
621 
622 	if (wdt_margin > 31)
623 		i2c_data[1] = (wdt_margin & 0xFC) | 0x83; /* resolution = 4s */
624 	else
625 		/*
626 		 * WDS = 1 (0x80), mulitplier = WD_TIMO, resolution = 1s (0x02)
627 		 */
628 		i2c_data[1] = wdt_margin << 2 | 0x82;
629 
630 	/*
631 	 * M41T65 has three bits for watchdog resolution.  Don't set bit 7, as
632 	 * that would be an invalid resolution.
633 	 */
634 	if (clientdata->features & M41T80_FEATURE_WD)
635 		i2c_data[1] &= ~M41T80_WATCHDOG_RB2;
636 
637 	i2c_transfer(save_client->adapter, msgs1, 1);
638 }
639 
640 /**
641  *	wdt_disable:
642  *
643  *	disables watchdog.
644  */
645 static void wdt_disable(void)
646 {
647 	unsigned char i2c_data[2], i2c_buf[0x10];
648 	struct i2c_msg msgs0[2] = {
649 		{
650 			.addr	= save_client->addr,
651 			.flags	= 0,
652 			.len	= 1,
653 			.buf	= i2c_data,
654 		},
655 		{
656 			.addr	= save_client->addr,
657 			.flags	= I2C_M_RD,
658 			.len	= 1,
659 			.buf	= i2c_buf,
660 		},
661 	};
662 	struct i2c_msg msgs1[1] = {
663 		{
664 			.addr	= save_client->addr,
665 			.flags	= 0,
666 			.len	= 2,
667 			.buf	= i2c_data,
668 		},
669 	};
670 
671 	i2c_data[0] = 0x09;
672 	i2c_transfer(save_client->adapter, msgs0, 2);
673 
674 	i2c_data[0] = 0x09;
675 	i2c_data[1] = 0x00;
676 	i2c_transfer(save_client->adapter, msgs1, 1);
677 }
678 
679 /**
680  *	wdt_write:
681  *	@file: file handle to the watchdog
682  *	@buf: buffer to write (unused as data does not matter here
683  *	@count: count of bytes
684  *	@ppos: pointer to the position to write. No seeks allowed
685  *
686  *	A write to a watchdog device is defined as a keepalive signal. Any
687  *	write of data will do, as we we don't define content meaning.
688  */
689 static ssize_t wdt_write(struct file *file, const char __user *buf,
690 			 size_t count, loff_t *ppos)
691 {
692 	if (count) {
693 		wdt_ping();
694 		return 1;
695 	}
696 	return 0;
697 }
698 
699 static ssize_t wdt_read(struct file *file, char __user *buf,
700 			size_t count, loff_t *ppos)
701 {
702 	return 0;
703 }
704 
705 /**
706  *	wdt_ioctl:
707  *	@file: file handle to the device
708  *	@cmd: watchdog command
709  *	@arg: argument pointer
710  *
711  *	The watchdog API defines a common set of functions for all watchdogs
712  *	according to their available features. We only actually usefully support
713  *	querying capabilities and current status.
714  */
715 static int wdt_ioctl(struct file *file, unsigned int cmd,
716 		     unsigned long arg)
717 {
718 	int new_margin, rv;
719 	static struct watchdog_info ident = {
720 		.options = WDIOF_POWERUNDER | WDIOF_KEEPALIVEPING |
721 			WDIOF_SETTIMEOUT,
722 		.firmware_version = 1,
723 		.identity = "M41T80 WTD"
724 	};
725 
726 	switch (cmd) {
727 	case WDIOC_GETSUPPORT:
728 		return copy_to_user((struct watchdog_info __user *)arg, &ident,
729 				    sizeof(ident)) ? -EFAULT : 0;
730 
731 	case WDIOC_GETSTATUS:
732 	case WDIOC_GETBOOTSTATUS:
733 		return put_user(boot_flag, (int __user *)arg);
734 	case WDIOC_KEEPALIVE:
735 		wdt_ping();
736 		return 0;
737 	case WDIOC_SETTIMEOUT:
738 		if (get_user(new_margin, (int __user *)arg))
739 			return -EFAULT;
740 		/* Arbitrary, can't find the card's limits */
741 		if (new_margin < 1 || new_margin > 124)
742 			return -EINVAL;
743 		wdt_margin = new_margin;
744 		wdt_ping();
745 		fallthrough;
746 	case WDIOC_GETTIMEOUT:
747 		return put_user(wdt_margin, (int __user *)arg);
748 
749 	case WDIOC_SETOPTIONS:
750 		if (copy_from_user(&rv, (int __user *)arg, sizeof(int)))
751 			return -EFAULT;
752 
753 		if (rv & WDIOS_DISABLECARD) {
754 			pr_info("disable watchdog\n");
755 			wdt_disable();
756 		}
757 
758 		if (rv & WDIOS_ENABLECARD) {
759 			pr_info("enable watchdog\n");
760 			wdt_ping();
761 		}
762 
763 		return -EINVAL;
764 	}
765 	return -ENOTTY;
766 }
767 
768 static long wdt_unlocked_ioctl(struct file *file, unsigned int cmd,
769 			       unsigned long arg)
770 {
771 	int ret;
772 
773 	mutex_lock(&m41t80_rtc_mutex);
774 	ret = wdt_ioctl(file, cmd, arg);
775 	mutex_unlock(&m41t80_rtc_mutex);
776 
777 	return ret;
778 }
779 
780 /**
781  *	wdt_open:
782  *	@inode: inode of device
783  *	@file: file handle to device
784  *
785  */
786 static int wdt_open(struct inode *inode, struct file *file)
787 {
788 	if (iminor(inode) == WATCHDOG_MINOR) {
789 		mutex_lock(&m41t80_rtc_mutex);
790 		if (test_and_set_bit(0, &wdt_is_open)) {
791 			mutex_unlock(&m41t80_rtc_mutex);
792 			return -EBUSY;
793 		}
794 		/*
795 		 *	Activate
796 		 */
797 		wdt_is_open = 1;
798 		mutex_unlock(&m41t80_rtc_mutex);
799 		return stream_open(inode, file);
800 	}
801 	return -ENODEV;
802 }
803 
804 /**
805  *	wdt_close:
806  *	@inode: inode to board
807  *	@file: file handle to board
808  *
809  */
810 static int wdt_release(struct inode *inode, struct file *file)
811 {
812 	if (iminor(inode) == WATCHDOG_MINOR)
813 		clear_bit(0, &wdt_is_open);
814 	return 0;
815 }
816 
817 /**
818  *	notify_sys:
819  *	@this: our notifier block
820  *	@code: the event being reported
821  *	@unused: unused
822  *
823  *	Our notifier is called on system shutdowns. We want to turn the card
824  *	off at reboot otherwise the machine will reboot again during memory
825  *	test or worse yet during the following fsck. This would suck, in fact
826  *	trust me - if it happens it does suck.
827  */
828 static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
829 			  void *unused)
830 {
831 	if (code == SYS_DOWN || code == SYS_HALT)
832 		/* Disable Watchdog */
833 		wdt_disable();
834 	return NOTIFY_DONE;
835 }
836 
837 static const struct file_operations wdt_fops = {
838 	.owner	= THIS_MODULE,
839 	.read	= wdt_read,
840 	.unlocked_ioctl = wdt_unlocked_ioctl,
841 	.compat_ioctl = compat_ptr_ioctl,
842 	.write	= wdt_write,
843 	.open	= wdt_open,
844 	.release = wdt_release,
845 	.llseek = no_llseek,
846 };
847 
848 static struct miscdevice wdt_dev = {
849 	.minor = WATCHDOG_MINOR,
850 	.name = "watchdog",
851 	.fops = &wdt_fops,
852 };
853 
854 /*
855  *	The WDT card needs to learn about soft shutdowns in order to
856  *	turn the timebomb registers off.
857  */
858 static struct notifier_block wdt_notifier = {
859 	.notifier_call = wdt_notify_sys,
860 };
861 #endif /* CONFIG_RTC_DRV_M41T80_WDT */
862 
863 /*
864  *****************************************************************************
865  *
866  *	Driver Interface
867  *
868  *****************************************************************************
869  */
870 
871 static int m41t80_probe(struct i2c_client *client,
872 			const struct i2c_device_id *id)
873 {
874 	struct i2c_adapter *adapter = client->adapter;
875 	int rc = 0;
876 	struct rtc_time tm;
877 	struct m41t80_data *m41t80_data = NULL;
878 	bool wakeup_source = false;
879 
880 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK |
881 				     I2C_FUNC_SMBUS_BYTE_DATA)) {
882 		dev_err(&adapter->dev, "doesn't support I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_I2C_BLOCK\n");
883 		return -ENODEV;
884 	}
885 
886 	m41t80_data = devm_kzalloc(&client->dev, sizeof(*m41t80_data),
887 				   GFP_KERNEL);
888 	if (!m41t80_data)
889 		return -ENOMEM;
890 
891 	m41t80_data->client = client;
892 	if (client->dev.of_node)
893 		m41t80_data->features = (unsigned long)
894 			of_device_get_match_data(&client->dev);
895 	else
896 		m41t80_data->features = id->driver_data;
897 	i2c_set_clientdata(client, m41t80_data);
898 
899 	m41t80_data->rtc =  devm_rtc_allocate_device(&client->dev);
900 	if (IS_ERR(m41t80_data->rtc))
901 		return PTR_ERR(m41t80_data->rtc);
902 
903 #ifdef CONFIG_OF
904 	wakeup_source = of_property_read_bool(client->dev.of_node,
905 					      "wakeup-source");
906 #endif
907 	if (client->irq > 0) {
908 		rc = devm_request_threaded_irq(&client->dev, client->irq,
909 					       NULL, m41t80_handle_irq,
910 					       IRQF_TRIGGER_LOW | IRQF_ONESHOT,
911 					       "m41t80", client);
912 		if (rc) {
913 			dev_warn(&client->dev, "unable to request IRQ, alarms disabled\n");
914 			client->irq = 0;
915 			wakeup_source = false;
916 		}
917 	}
918 	if (client->irq > 0 || wakeup_source)
919 		device_init_wakeup(&client->dev, true);
920 	else
921 		clear_bit(RTC_FEATURE_ALARM, m41t80_data->rtc->features);
922 
923 	m41t80_data->rtc->ops = &m41t80_rtc_ops;
924 	m41t80_data->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
925 	m41t80_data->rtc->range_max = RTC_TIMESTAMP_END_2099;
926 
927 	if (client->irq <= 0) {
928 		/* We cannot support UIE mode if we do not have an IRQ line */
929 		m41t80_data->rtc->uie_unsupported = 1;
930 	}
931 
932 	/* Make sure HT (Halt Update) bit is cleared */
933 	rc = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_HOUR);
934 
935 	if (rc >= 0 && rc & M41T80_ALHOUR_HT) {
936 		if (m41t80_data->features & M41T80_FEATURE_HT) {
937 			m41t80_rtc_read_time(&client->dev, &tm);
938 			dev_info(&client->dev, "HT bit was set!\n");
939 			dev_info(&client->dev, "Power Down at %ptR\n", &tm);
940 		}
941 		rc = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_HOUR,
942 					       rc & ~M41T80_ALHOUR_HT);
943 	}
944 
945 	if (rc < 0) {
946 		dev_err(&client->dev, "Can't clear HT bit\n");
947 		return rc;
948 	}
949 
950 	/* Make sure ST (stop) bit is cleared */
951 	rc = i2c_smbus_read_byte_data(client, M41T80_REG_SEC);
952 
953 	if (rc >= 0 && rc & M41T80_SEC_ST)
954 		rc = i2c_smbus_write_byte_data(client, M41T80_REG_SEC,
955 					       rc & ~M41T80_SEC_ST);
956 	if (rc < 0) {
957 		dev_err(&client->dev, "Can't clear ST bit\n");
958 		return rc;
959 	}
960 
961 #ifdef CONFIG_RTC_DRV_M41T80_WDT
962 	if (m41t80_data->features & M41T80_FEATURE_HT) {
963 		save_client = client;
964 		rc = misc_register(&wdt_dev);
965 		if (rc)
966 			return rc;
967 		rc = register_reboot_notifier(&wdt_notifier);
968 		if (rc) {
969 			misc_deregister(&wdt_dev);
970 			return rc;
971 		}
972 	}
973 #endif
974 #ifdef CONFIG_COMMON_CLK
975 	if (m41t80_data->features & M41T80_FEATURE_SQ)
976 		m41t80_sqw_register_clk(m41t80_data);
977 #endif
978 
979 	rc = devm_rtc_register_device(m41t80_data->rtc);
980 	if (rc)
981 		return rc;
982 
983 	return 0;
984 }
985 
986 static int m41t80_remove(struct i2c_client *client)
987 {
988 #ifdef CONFIG_RTC_DRV_M41T80_WDT
989 	struct m41t80_data *clientdata = i2c_get_clientdata(client);
990 
991 	if (clientdata->features & M41T80_FEATURE_HT) {
992 		misc_deregister(&wdt_dev);
993 		unregister_reboot_notifier(&wdt_notifier);
994 	}
995 #endif
996 
997 	return 0;
998 }
999 
1000 static struct i2c_driver m41t80_driver = {
1001 	.driver = {
1002 		.name = "rtc-m41t80",
1003 		.of_match_table = of_match_ptr(m41t80_of_match),
1004 		.pm = &m41t80_pm,
1005 	},
1006 	.probe = m41t80_probe,
1007 	.remove = m41t80_remove,
1008 	.id_table = m41t80_id,
1009 };
1010 
1011 module_i2c_driver(m41t80_driver);
1012 
1013 MODULE_AUTHOR("Alexander Bigga <ab@mycable.de>");
1014 MODULE_DESCRIPTION("ST Microelectronics M41T80 series RTC I2C Client Driver");
1015 MODULE_LICENSE("GPL");
1016