xref: /openbmc/linux/drivers/rtc/rtc-ds1685.c (revision e0bf6c5c)
1 /*
2  * An rtc driver for the Dallas/Maxim DS1685/DS1687 and related real-time
3  * chips.
4  *
5  * Copyright (C) 2011-2014 Joshua Kinard <kumba@gentoo.org>.
6  * Copyright (C) 2009 Matthias Fuchs <matthias.fuchs@esd-electronics.com>.
7  *
8  * References:
9  *    DS1685/DS1687 3V/5V Real-Time Clocks, 19-5215, Rev 4/10.
10  *    DS17x85/DS17x87 3V/5V Real-Time Clocks, 19-5222, Rev 4/10.
11  *    DS1689/DS1693 3V/5V Serialized Real-Time Clocks, Rev 112105.
12  *    Application Note 90, Using the Multiplex Bus RTC Extended Features.
13  *
14  * This program is free software; you can redistribute it and/or modify
15  * it under the terms of the GNU General Public License version 2 as
16  * published by the Free Software Foundation.
17  */
18 
19 #include <linux/bcd.h>
20 #include <linux/delay.h>
21 #include <linux/io.h>
22 #include <linux/module.h>
23 #include <linux/platform_device.h>
24 #include <linux/rtc.h>
25 #include <linux/workqueue.h>
26 
27 #include <linux/rtc/ds1685.h>
28 
29 #ifdef CONFIG_PROC_FS
30 #include <linux/proc_fs.h>
31 #endif
32 
33 #define DRV_VERSION	"0.42.0"
34 
35 
36 /* ----------------------------------------------------------------------- */
37 /* Standard read/write functions if platform does not provide overrides */
38 
39 /**
40  * ds1685_read - read a value from an rtc register.
41  * @rtc: pointer to the ds1685 rtc structure.
42  * @reg: the register address to read.
43  */
44 static u8
45 ds1685_read(struct ds1685_priv *rtc, int reg)
46 {
47 	return readb((u8 __iomem *)rtc->regs +
48 		     (reg * rtc->regstep));
49 }
50 
51 /**
52  * ds1685_write - write a value to an rtc register.
53  * @rtc: pointer to the ds1685 rtc structure.
54  * @reg: the register address to write.
55  * @value: value to write to the register.
56  */
57 static void
58 ds1685_write(struct ds1685_priv *rtc, int reg, u8 value)
59 {
60 	writeb(value, ((u8 __iomem *)rtc->regs +
61 		       (reg * rtc->regstep)));
62 }
63 /* ----------------------------------------------------------------------- */
64 
65 
66 /* ----------------------------------------------------------------------- */
67 /* Inlined functions */
68 
69 /**
70  * ds1685_rtc_bcd2bin - bcd2bin wrapper in case platform doesn't support BCD.
71  * @rtc: pointer to the ds1685 rtc structure.
72  * @val: u8 time value to consider converting.
73  * @bcd_mask: u8 mask value if BCD mode is used.
74  * @bin_mask: u8 mask value if BIN mode is used.
75  *
76  * Returns the value, converted to BIN if originally in BCD and bcd_mode TRUE.
77  */
78 static inline u8
79 ds1685_rtc_bcd2bin(struct ds1685_priv *rtc, u8 val, u8 bcd_mask, u8 bin_mask)
80 {
81 	if (rtc->bcd_mode)
82 		return (bcd2bin(val) & bcd_mask);
83 
84 	return (val & bin_mask);
85 }
86 
87 /**
88  * ds1685_rtc_bin2bcd - bin2bcd wrapper in case platform doesn't support BCD.
89  * @rtc: pointer to the ds1685 rtc structure.
90  * @val: u8 time value to consider converting.
91  * @bin_mask: u8 mask value if BIN mode is used.
92  * @bcd_mask: u8 mask value if BCD mode is used.
93  *
94  * Returns the value, converted to BCD if originally in BIN and bcd_mode TRUE.
95  */
96 static inline u8
97 ds1685_rtc_bin2bcd(struct ds1685_priv *rtc, u8 val, u8 bin_mask, u8 bcd_mask)
98 {
99 	if (rtc->bcd_mode)
100 		return (bin2bcd(val) & bcd_mask);
101 
102 	return (val & bin_mask);
103 }
104 
105 /**
106  * ds1685_rtc_switch_to_bank0 - switch the rtc to bank 0.
107  * @rtc: pointer to the ds1685 rtc structure.
108  */
109 static inline void
110 ds1685_rtc_switch_to_bank0(struct ds1685_priv *rtc)
111 {
112 	rtc->write(rtc, RTC_CTRL_A,
113 		   (rtc->read(rtc, RTC_CTRL_A) & ~(RTC_CTRL_A_DV0)));
114 }
115 
116 /**
117  * ds1685_rtc_switch_to_bank1 - switch the rtc to bank 1.
118  * @rtc: pointer to the ds1685 rtc structure.
119  */
120 static inline void
121 ds1685_rtc_switch_to_bank1(struct ds1685_priv *rtc)
122 {
123 	rtc->write(rtc, RTC_CTRL_A,
124 		   (rtc->read(rtc, RTC_CTRL_A) | RTC_CTRL_A_DV0));
125 }
126 
127 /**
128  * ds1685_rtc_begin_data_access - prepare the rtc for data access.
129  * @rtc: pointer to the ds1685 rtc structure.
130  *
131  * This takes several steps to prepare the rtc for access to get/set time
132  * and alarm values from the rtc registers:
133  *  - Sets the SET bit in Control Register B.
134  *  - Reads Ext Control Register 4A and checks the INCR bit.
135  *  - If INCR is active, a short delay is added before Ext Control Register 4A
136  *    is read again in a loop until INCR is inactive.
137  *  - Switches the rtc to bank 1.  This allows access to all relevant
138  *    data for normal rtc operation, as bank 0 contains only the nvram.
139  */
140 static inline void
141 ds1685_rtc_begin_data_access(struct ds1685_priv *rtc)
142 {
143 	/* Set the SET bit in Ctrl B */
144 	rtc->write(rtc, RTC_CTRL_B,
145 		   (rtc->read(rtc, RTC_CTRL_B) | RTC_CTRL_B_SET));
146 
147 	/* Read Ext Ctrl 4A and check the INCR bit to avoid a lockout. */
148 	while (rtc->read(rtc, RTC_EXT_CTRL_4A) & RTC_CTRL_4A_INCR)
149 		cpu_relax();
150 
151 	/* Switch to Bank 1 */
152 	ds1685_rtc_switch_to_bank1(rtc);
153 }
154 
155 /**
156  * ds1685_rtc_end_data_access - end data access on the rtc.
157  * @rtc: pointer to the ds1685 rtc structure.
158  *
159  * This ends what was started by ds1685_rtc_begin_data_access:
160  *  - Switches the rtc back to bank 0.
161  *  - Clears the SET bit in Control Register B.
162  */
163 static inline void
164 ds1685_rtc_end_data_access(struct ds1685_priv *rtc)
165 {
166 	/* Switch back to Bank 0 */
167 	ds1685_rtc_switch_to_bank1(rtc);
168 
169 	/* Clear the SET bit in Ctrl B */
170 	rtc->write(rtc, RTC_CTRL_B,
171 		   (rtc->read(rtc, RTC_CTRL_B) & ~(RTC_CTRL_B_SET)));
172 }
173 
174 /**
175  * ds1685_rtc_begin_ctrl_access - prepare the rtc for ctrl access.
176  * @rtc: pointer to the ds1685 rtc structure.
177  * @flags: irq flags variable for spin_lock_irqsave.
178  *
179  * This takes several steps to prepare the rtc for access to read just the
180  * control registers:
181  *  - Sets a spinlock on the rtc IRQ.
182  *  - Switches the rtc to bank 1.  This allows access to the two extended
183  *    control registers.
184  *
185  * Only use this where you are certain another lock will not be held.
186  */
187 static inline void
188 ds1685_rtc_begin_ctrl_access(struct ds1685_priv *rtc, unsigned long flags)
189 {
190 	spin_lock_irqsave(&rtc->lock, flags);
191 	ds1685_rtc_switch_to_bank1(rtc);
192 }
193 
194 /**
195  * ds1685_rtc_end_ctrl_access - end ctrl access on the rtc.
196  * @rtc: pointer to the ds1685 rtc structure.
197  * @flags: irq flags variable for spin_unlock_irqrestore.
198  *
199  * This ends what was started by ds1685_rtc_begin_ctrl_access:
200  *  - Switches the rtc back to bank 0.
201  *  - Unsets the spinlock on the rtc IRQ.
202  */
203 static inline void
204 ds1685_rtc_end_ctrl_access(struct ds1685_priv *rtc, unsigned long flags)
205 {
206 	ds1685_rtc_switch_to_bank0(rtc);
207 	spin_unlock_irqrestore(&rtc->lock, flags);
208 }
209 
210 /**
211  * ds1685_rtc_get_ssn - retrieve the silicon serial number.
212  * @rtc: pointer to the ds1685 rtc structure.
213  * @ssn: u8 array to hold the bits of the silicon serial number.
214  *
215  * This number starts at 0x40, and is 8-bytes long, ending at 0x47. The
216  * first byte is the model number, the next six bytes are the serial number
217  * digits, and the final byte is a CRC check byte.  Together, they form the
218  * silicon serial number.
219  *
220  * These values are stored in bank1, so ds1685_rtc_switch_to_bank1 must be
221  * called first before calling this function, else data will be read out of
222  * the bank0 NVRAM.  Be sure to call ds1685_rtc_switch_to_bank0 when done.
223  */
224 static inline void
225 ds1685_rtc_get_ssn(struct ds1685_priv *rtc, u8 *ssn)
226 {
227 	ssn[0] = rtc->read(rtc, RTC_BANK1_SSN_MODEL);
228 	ssn[1] = rtc->read(rtc, RTC_BANK1_SSN_BYTE_1);
229 	ssn[2] = rtc->read(rtc, RTC_BANK1_SSN_BYTE_2);
230 	ssn[3] = rtc->read(rtc, RTC_BANK1_SSN_BYTE_3);
231 	ssn[4] = rtc->read(rtc, RTC_BANK1_SSN_BYTE_4);
232 	ssn[5] = rtc->read(rtc, RTC_BANK1_SSN_BYTE_5);
233 	ssn[6] = rtc->read(rtc, RTC_BANK1_SSN_BYTE_6);
234 	ssn[7] = rtc->read(rtc, RTC_BANK1_SSN_CRC);
235 }
236 /* ----------------------------------------------------------------------- */
237 
238 
239 /* ----------------------------------------------------------------------- */
240 /* Read/Set Time & Alarm functions */
241 
242 /**
243  * ds1685_rtc_read_time - reads the time registers.
244  * @dev: pointer to device structure.
245  * @tm: pointer to rtc_time structure.
246  */
247 static int
248 ds1685_rtc_read_time(struct device *dev, struct rtc_time *tm)
249 {
250 	struct platform_device *pdev = to_platform_device(dev);
251 	struct ds1685_priv *rtc = platform_get_drvdata(pdev);
252 	u8 ctrlb, century;
253 	u8 seconds, minutes, hours, wday, mday, month, years;
254 
255 	/* Fetch the time info from the RTC registers. */
256 	ds1685_rtc_begin_data_access(rtc);
257 	seconds = rtc->read(rtc, RTC_SECS);
258 	minutes = rtc->read(rtc, RTC_MINS);
259 	hours   = rtc->read(rtc, RTC_HRS);
260 	wday    = rtc->read(rtc, RTC_WDAY);
261 	mday    = rtc->read(rtc, RTC_MDAY);
262 	month   = rtc->read(rtc, RTC_MONTH);
263 	years   = rtc->read(rtc, RTC_YEAR);
264 	century = rtc->read(rtc, RTC_CENTURY);
265 	ctrlb   = rtc->read(rtc, RTC_CTRL_B);
266 	ds1685_rtc_end_data_access(rtc);
267 
268 	/* bcd2bin if needed, perform fixups, and store to rtc_time. */
269 	years        = ds1685_rtc_bcd2bin(rtc, years, RTC_YEAR_BCD_MASK,
270 					  RTC_YEAR_BIN_MASK);
271 	century      = ds1685_rtc_bcd2bin(rtc, century, RTC_CENTURY_MASK,
272 					  RTC_CENTURY_MASK);
273 	tm->tm_sec   = ds1685_rtc_bcd2bin(rtc, seconds, RTC_SECS_BCD_MASK,
274 					  RTC_SECS_BIN_MASK);
275 	tm->tm_min   = ds1685_rtc_bcd2bin(rtc, minutes, RTC_MINS_BCD_MASK,
276 					  RTC_MINS_BIN_MASK);
277 	tm->tm_hour  = ds1685_rtc_bcd2bin(rtc, hours, RTC_HRS_24_BCD_MASK,
278 					  RTC_HRS_24_BIN_MASK);
279 	tm->tm_wday  = (ds1685_rtc_bcd2bin(rtc, wday, RTC_WDAY_MASK,
280 					   RTC_WDAY_MASK) - 1);
281 	tm->tm_mday  = ds1685_rtc_bcd2bin(rtc, mday, RTC_MDAY_BCD_MASK,
282 					  RTC_MDAY_BIN_MASK);
283 	tm->tm_mon   = (ds1685_rtc_bcd2bin(rtc, month, RTC_MONTH_BCD_MASK,
284 					   RTC_MONTH_BIN_MASK) - 1);
285 	tm->tm_year  = ((years + (century * 100)) - 1900);
286 	tm->tm_yday  = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year);
287 	tm->tm_isdst = 0; /* RTC has hardcoded timezone, so don't use. */
288 
289 	return rtc_valid_tm(tm);
290 }
291 
292 /**
293  * ds1685_rtc_set_time - sets the time registers.
294  * @dev: pointer to device structure.
295  * @tm: pointer to rtc_time structure.
296  */
297 static int
298 ds1685_rtc_set_time(struct device *dev, struct rtc_time *tm)
299 {
300 	struct platform_device *pdev = to_platform_device(dev);
301 	struct ds1685_priv *rtc = platform_get_drvdata(pdev);
302 	u8 ctrlb, seconds, minutes, hours, wday, mday, month, years, century;
303 
304 	/* Fetch the time info from rtc_time. */
305 	seconds = ds1685_rtc_bin2bcd(rtc, tm->tm_sec, RTC_SECS_BIN_MASK,
306 				     RTC_SECS_BCD_MASK);
307 	minutes = ds1685_rtc_bin2bcd(rtc, tm->tm_min, RTC_MINS_BIN_MASK,
308 				     RTC_MINS_BCD_MASK);
309 	hours   = ds1685_rtc_bin2bcd(rtc, tm->tm_hour, RTC_HRS_24_BIN_MASK,
310 				     RTC_HRS_24_BCD_MASK);
311 	wday    = ds1685_rtc_bin2bcd(rtc, (tm->tm_wday + 1), RTC_WDAY_MASK,
312 				     RTC_WDAY_MASK);
313 	mday    = ds1685_rtc_bin2bcd(rtc, tm->tm_mday, RTC_MDAY_BIN_MASK,
314 				     RTC_MDAY_BCD_MASK);
315 	month   = ds1685_rtc_bin2bcd(rtc, (tm->tm_mon + 1), RTC_MONTH_BIN_MASK,
316 				     RTC_MONTH_BCD_MASK);
317 	years   = ds1685_rtc_bin2bcd(rtc, (tm->tm_year % 100),
318 				     RTC_YEAR_BIN_MASK, RTC_YEAR_BCD_MASK);
319 	century = ds1685_rtc_bin2bcd(rtc, ((tm->tm_year + 1900) / 100),
320 				     RTC_CENTURY_MASK, RTC_CENTURY_MASK);
321 
322 	/*
323 	 * Perform Sanity Checks:
324 	 *   - Months: !> 12, Month Day != 0.
325 	 *   - Month Day !> Max days in current month.
326 	 *   - Hours !>= 24, Mins !>= 60, Secs !>= 60, & Weekday !> 7.
327 	 */
328 	if ((tm->tm_mon > 11) || (mday == 0))
329 		return -EDOM;
330 
331 	if (tm->tm_mday > rtc_month_days(tm->tm_mon, tm->tm_year))
332 		return -EDOM;
333 
334 	if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) ||
335 	    (tm->tm_sec >= 60)  || (wday > 7))
336 		return -EDOM;
337 
338 	/*
339 	 * Set the data mode to use and store the time values in the
340 	 * RTC registers.
341 	 */
342 	ds1685_rtc_begin_data_access(rtc);
343 	ctrlb = rtc->read(rtc, RTC_CTRL_B);
344 	if (rtc->bcd_mode)
345 		ctrlb &= ~(RTC_CTRL_B_DM);
346 	else
347 		ctrlb |= RTC_CTRL_B_DM;
348 	rtc->write(rtc, RTC_CTRL_B, ctrlb);
349 	rtc->write(rtc, RTC_SECS, seconds);
350 	rtc->write(rtc, RTC_MINS, minutes);
351 	rtc->write(rtc, RTC_HRS, hours);
352 	rtc->write(rtc, RTC_WDAY, wday);
353 	rtc->write(rtc, RTC_MDAY, mday);
354 	rtc->write(rtc, RTC_MONTH, month);
355 	rtc->write(rtc, RTC_YEAR, years);
356 	rtc->write(rtc, RTC_CENTURY, century);
357 	ds1685_rtc_end_data_access(rtc);
358 
359 	return 0;
360 }
361 
362 /**
363  * ds1685_rtc_read_alarm - reads the alarm registers.
364  * @dev: pointer to device structure.
365  * @alrm: pointer to rtc_wkalrm structure.
366  *
367  * There are three primary alarm registers: seconds, minutes, and hours.
368  * A fourth alarm register for the month date is also available in bank1 for
369  * kickstart/wakeup features.  The DS1685/DS1687 manual states that a
370  * "don't care" value ranging from 0xc0 to 0xff may be written into one or
371  * more of the three alarm bytes to act as a wildcard value.  The fourth
372  * byte doesn't support a "don't care" value.
373  */
374 static int
375 ds1685_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
376 {
377 	struct platform_device *pdev = to_platform_device(dev);
378 	struct ds1685_priv *rtc = platform_get_drvdata(pdev);
379 	u8 seconds, minutes, hours, mday, ctrlb, ctrlc;
380 
381 	/* Fetch the alarm info from the RTC alarm registers. */
382 	ds1685_rtc_begin_data_access(rtc);
383 	seconds	= rtc->read(rtc, RTC_SECS_ALARM);
384 	minutes	= rtc->read(rtc, RTC_MINS_ALARM);
385 	hours	= rtc->read(rtc, RTC_HRS_ALARM);
386 	mday	= rtc->read(rtc, RTC_MDAY_ALARM);
387 	ctrlb	= rtc->read(rtc, RTC_CTRL_B);
388 	ctrlc	= rtc->read(rtc, RTC_CTRL_C);
389 	ds1685_rtc_end_data_access(rtc);
390 
391 	/* Check month date. */
392 	if (!(mday >= 1) && (mday <= 31))
393 		return -EDOM;
394 
395 	/*
396 	 * Check the three alarm bytes.
397 	 *
398 	 * The Linux RTC system doesn't support the "don't care" capability
399 	 * of this RTC chip.  We check for it anyways in case support is
400 	 * added in the future.
401 	 */
402 	if (unlikely(seconds >= 0xc0))
403 		alrm->time.tm_sec = -1;
404 	else
405 		alrm->time.tm_sec = ds1685_rtc_bcd2bin(rtc, seconds,
406 						       RTC_SECS_BCD_MASK,
407 						       RTC_SECS_BIN_MASK);
408 
409 	if (unlikely(minutes >= 0xc0))
410 		alrm->time.tm_min = -1;
411 	else
412 		alrm->time.tm_min = ds1685_rtc_bcd2bin(rtc, minutes,
413 						       RTC_MINS_BCD_MASK,
414 						       RTC_MINS_BIN_MASK);
415 
416 	if (unlikely(hours >= 0xc0))
417 		alrm->time.tm_hour = -1;
418 	else
419 		alrm->time.tm_hour = ds1685_rtc_bcd2bin(rtc, hours,
420 							RTC_HRS_24_BCD_MASK,
421 							RTC_HRS_24_BIN_MASK);
422 
423 	/* Write the data to rtc_wkalrm. */
424 	alrm->time.tm_mday = ds1685_rtc_bcd2bin(rtc, mday, RTC_MDAY_BCD_MASK,
425 						RTC_MDAY_BIN_MASK);
426 	alrm->time.tm_mon = -1;
427 	alrm->time.tm_year = -1;
428 	alrm->time.tm_wday = -1;
429 	alrm->time.tm_yday = -1;
430 	alrm->time.tm_isdst = -1;
431 	alrm->enabled = !!(ctrlb & RTC_CTRL_B_AIE);
432 	alrm->pending = !!(ctrlc & RTC_CTRL_C_AF);
433 
434 	return 0;
435 }
436 
437 /**
438  * ds1685_rtc_set_alarm - sets the alarm in registers.
439  * @dev: pointer to device structure.
440  * @alrm: pointer to rtc_wkalrm structure.
441  */
442 static int
443 ds1685_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
444 {
445 	struct platform_device *pdev = to_platform_device(dev);
446 	struct ds1685_priv *rtc = platform_get_drvdata(pdev);
447 	u8 ctrlb, seconds, minutes, hours, mday;
448 
449 	/* Fetch the alarm info and convert to BCD. */
450 	seconds	= ds1685_rtc_bin2bcd(rtc, alrm->time.tm_sec,
451 				     RTC_SECS_BIN_MASK,
452 				     RTC_SECS_BCD_MASK);
453 	minutes	= ds1685_rtc_bin2bcd(rtc, alrm->time.tm_min,
454 				     RTC_MINS_BIN_MASK,
455 				     RTC_MINS_BCD_MASK);
456 	hours	= ds1685_rtc_bin2bcd(rtc, alrm->time.tm_hour,
457 				     RTC_HRS_24_BIN_MASK,
458 				     RTC_HRS_24_BCD_MASK);
459 	mday	= ds1685_rtc_bin2bcd(rtc, alrm->time.tm_mday,
460 				     RTC_MDAY_BIN_MASK,
461 				     RTC_MDAY_BCD_MASK);
462 
463 	/* Check the month date for validity. */
464 	if (!(mday >= 1) && (mday <= 31))
465 		return -EDOM;
466 
467 	/*
468 	 * Check the three alarm bytes.
469 	 *
470 	 * The Linux RTC system doesn't support the "don't care" capability
471 	 * of this RTC chip because rtc_valid_tm tries to validate every
472 	 * field, and we only support four fields.  We put the support
473 	 * here anyways for the future.
474 	 */
475 	if (unlikely(seconds >= 0xc0))
476 		seconds = 0xff;
477 
478 	if (unlikely(minutes >= 0xc0))
479 		minutes = 0xff;
480 
481 	if (unlikely(hours >= 0xc0))
482 		hours = 0xff;
483 
484 	alrm->time.tm_mon	= -1;
485 	alrm->time.tm_year	= -1;
486 	alrm->time.tm_wday	= -1;
487 	alrm->time.tm_yday	= -1;
488 	alrm->time.tm_isdst	= -1;
489 
490 	/* Disable the alarm interrupt first. */
491 	ds1685_rtc_begin_data_access(rtc);
492 	ctrlb = rtc->read(rtc, RTC_CTRL_B);
493 	rtc->write(rtc, RTC_CTRL_B, (ctrlb & ~(RTC_CTRL_B_AIE)));
494 
495 	/* Read ctrlc to clear RTC_CTRL_C_AF. */
496 	rtc->read(rtc, RTC_CTRL_C);
497 
498 	/*
499 	 * Set the data mode to use and store the time values in the
500 	 * RTC registers.
501 	 */
502 	ctrlb = rtc->read(rtc, RTC_CTRL_B);
503 	if (rtc->bcd_mode)
504 		ctrlb &= ~(RTC_CTRL_B_DM);
505 	else
506 		ctrlb |= RTC_CTRL_B_DM;
507 	rtc->write(rtc, RTC_CTRL_B, ctrlb);
508 	rtc->write(rtc, RTC_SECS_ALARM, seconds);
509 	rtc->write(rtc, RTC_MINS_ALARM, minutes);
510 	rtc->write(rtc, RTC_HRS_ALARM, hours);
511 	rtc->write(rtc, RTC_MDAY_ALARM, mday);
512 
513 	/* Re-enable the alarm if needed. */
514 	if (alrm->enabled) {
515 		ctrlb = rtc->read(rtc, RTC_CTRL_B);
516 		ctrlb |= RTC_CTRL_B_AIE;
517 		rtc->write(rtc, RTC_CTRL_B, ctrlb);
518 	}
519 
520 	/* Done! */
521 	ds1685_rtc_end_data_access(rtc);
522 
523 	return 0;
524 }
525 /* ----------------------------------------------------------------------- */
526 
527 
528 /* ----------------------------------------------------------------------- */
529 /* /dev/rtcX Interface functions */
530 
531 /**
532  * ds1685_rtc_alarm_irq_enable - replaces ioctl() RTC_AIE on/off.
533  * @dev: pointer to device structure.
534  * @enabled: flag indicating whether to enable or disable.
535  */
536 static int
537 ds1685_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
538 {
539 	struct ds1685_priv *rtc = dev_get_drvdata(dev);
540 	unsigned long flags = 0;
541 
542 	/* Enable/disable the Alarm IRQ-Enable flag. */
543 	spin_lock_irqsave(&rtc->lock, flags);
544 
545 	/* Flip the requisite interrupt-enable bit. */
546 	if (enabled)
547 		rtc->write(rtc, RTC_CTRL_B, (rtc->read(rtc, RTC_CTRL_B) |
548 					     RTC_CTRL_B_AIE));
549 	else
550 		rtc->write(rtc, RTC_CTRL_B, (rtc->read(rtc, RTC_CTRL_B) &
551 					     ~(RTC_CTRL_B_AIE)));
552 
553 	/* Read Control C to clear all the flag bits. */
554 	rtc->read(rtc, RTC_CTRL_C);
555 	spin_unlock_irqrestore(&rtc->lock, flags);
556 
557 	return 0;
558 }
559 /* ----------------------------------------------------------------------- */
560 
561 
562 /* ----------------------------------------------------------------------- */
563 /* IRQ handler & workqueue. */
564 
565 /**
566  * ds1685_rtc_irq_handler - IRQ handler.
567  * @irq: IRQ number.
568  * @dev_id: platform device pointer.
569  */
570 static irqreturn_t
571 ds1685_rtc_irq_handler(int irq, void *dev_id)
572 {
573 	struct platform_device *pdev = dev_id;
574 	struct ds1685_priv *rtc = platform_get_drvdata(pdev);
575 	u8 ctrlb, ctrlc;
576 	unsigned long events = 0;
577 	u8 num_irqs = 0;
578 
579 	/* Abort early if the device isn't ready yet (i.e., DEBUG_SHIRQ). */
580 	if (unlikely(!rtc))
581 		return IRQ_HANDLED;
582 
583 	/* Ctrlb holds the interrupt-enable bits and ctrlc the flag bits. */
584 	spin_lock(&rtc->lock);
585 	ctrlb = rtc->read(rtc, RTC_CTRL_B);
586 	ctrlc = rtc->read(rtc, RTC_CTRL_C);
587 
588 	/* Is the IRQF bit set? */
589 	if (likely(ctrlc & RTC_CTRL_C_IRQF)) {
590 		/*
591 		 * We need to determine if it was one of the standard
592 		 * events: PF, AF, or UF.  If so, we handle them and
593 		 * update the RTC core.
594 		 */
595 		if (likely(ctrlc & RTC_CTRL_B_PAU_MASK)) {
596 			events = RTC_IRQF;
597 
598 			/* Check for a periodic interrupt. */
599 			if ((ctrlb & RTC_CTRL_B_PIE) &&
600 			    (ctrlc & RTC_CTRL_C_PF)) {
601 				events |= RTC_PF;
602 				num_irqs++;
603 			}
604 
605 			/* Check for an alarm interrupt. */
606 			if ((ctrlb & RTC_CTRL_B_AIE) &&
607 			    (ctrlc & RTC_CTRL_C_AF)) {
608 				events |= RTC_AF;
609 				num_irqs++;
610 			}
611 
612 			/* Check for an update interrupt. */
613 			if ((ctrlb & RTC_CTRL_B_UIE) &&
614 			    (ctrlc & RTC_CTRL_C_UF)) {
615 				events |= RTC_UF;
616 				num_irqs++;
617 			}
618 
619 			rtc_update_irq(rtc->dev, num_irqs, events);
620 		} else {
621 			/*
622 			 * One of the "extended" interrupts was received that
623 			 * is not recognized by the RTC core.  These need to
624 			 * be handled in task context as they can call other
625 			 * functions and the time spent in irq context needs
626 			 * to be minimized.  Schedule them into a workqueue
627 			 * and inform the RTC core that the IRQs were handled.
628 			 */
629 			spin_unlock(&rtc->lock);
630 			schedule_work(&rtc->work);
631 			rtc_update_irq(rtc->dev, 0, 0);
632 			return IRQ_HANDLED;
633 		}
634 	}
635 	spin_unlock(&rtc->lock);
636 
637 	return events ? IRQ_HANDLED : IRQ_NONE;
638 }
639 
640 /**
641  * ds1685_rtc_work_queue - work queue handler.
642  * @work: work_struct containing data to work on in task context.
643  */
644 static void
645 ds1685_rtc_work_queue(struct work_struct *work)
646 {
647 	struct ds1685_priv *rtc = container_of(work,
648 					       struct ds1685_priv, work);
649 	struct platform_device *pdev = to_platform_device(&rtc->dev->dev);
650 	struct mutex *rtc_mutex = &rtc->dev->ops_lock;
651 	u8 ctrl4a, ctrl4b;
652 
653 	mutex_lock(rtc_mutex);
654 
655 	ds1685_rtc_switch_to_bank1(rtc);
656 	ctrl4a = rtc->read(rtc, RTC_EXT_CTRL_4A);
657 	ctrl4b = rtc->read(rtc, RTC_EXT_CTRL_4B);
658 
659 	/*
660 	 * Check for a kickstart interrupt. With Vcc applied, this
661 	 * typically means that the power button was pressed, so we
662 	 * begin the shutdown sequence.
663 	 */
664 	if ((ctrl4b & RTC_CTRL_4B_KSE) && (ctrl4a & RTC_CTRL_4A_KF)) {
665 		/* Briefly disable kickstarts to debounce button presses. */
666 		rtc->write(rtc, RTC_EXT_CTRL_4B,
667 			   (rtc->read(rtc, RTC_EXT_CTRL_4B) &
668 			    ~(RTC_CTRL_4B_KSE)));
669 
670 		/* Clear the kickstart flag. */
671 		rtc->write(rtc, RTC_EXT_CTRL_4A,
672 			   (ctrl4a & ~(RTC_CTRL_4A_KF)));
673 
674 
675 		/*
676 		 * Sleep 500ms before re-enabling kickstarts.  This allows
677 		 * adequate time to avoid reading signal jitter as additional
678 		 * button presses.
679 		 */
680 		msleep(500);
681 		rtc->write(rtc, RTC_EXT_CTRL_4B,
682 			   (rtc->read(rtc, RTC_EXT_CTRL_4B) |
683 			    RTC_CTRL_4B_KSE));
684 
685 		/* Call the platform pre-poweroff function. Else, shutdown. */
686 		if (rtc->prepare_poweroff != NULL)
687 			rtc->prepare_poweroff();
688 		else
689 			ds1685_rtc_poweroff(pdev);
690 	}
691 
692 	/*
693 	 * Check for a wake-up interrupt.  With Vcc applied, this is
694 	 * essentially a second alarm interrupt, except it takes into
695 	 * account the 'date' register in bank1 in addition to the
696 	 * standard three alarm registers.
697 	 */
698 	if ((ctrl4b & RTC_CTRL_4B_WIE) && (ctrl4a & RTC_CTRL_4A_WF)) {
699 		rtc->write(rtc, RTC_EXT_CTRL_4A,
700 			   (ctrl4a & ~(RTC_CTRL_4A_WF)));
701 
702 		/* Call the platform wake_alarm function if defined. */
703 		if (rtc->wake_alarm != NULL)
704 			rtc->wake_alarm();
705 		else
706 			dev_warn(&pdev->dev,
707 				 "Wake Alarm IRQ just occurred!\n");
708 	}
709 
710 	/*
711 	 * Check for a ram-clear interrupt.  This happens if RIE=1 and RF=0
712 	 * when RCE=1 in 4B.  This clears all NVRAM bytes in bank0 by setting
713 	 * each byte to a logic 1.  This has no effect on any extended
714 	 * NV-SRAM that might be present, nor on the time/calendar/alarm
715 	 * registers.  After a ram-clear is completed, there is a minimum
716 	 * recovery time of ~150ms in which all reads/writes are locked out.
717 	 * NOTE: A ram-clear can still occur if RCE=1 and RIE=0.  We cannot
718 	 * catch this scenario.
719 	 */
720 	if ((ctrl4b & RTC_CTRL_4B_RIE) && (ctrl4a & RTC_CTRL_4A_RF)) {
721 		rtc->write(rtc, RTC_EXT_CTRL_4A,
722 			   (ctrl4a & ~(RTC_CTRL_4A_RF)));
723 		msleep(150);
724 
725 		/* Call the platform post_ram_clear function if defined. */
726 		if (rtc->post_ram_clear != NULL)
727 			rtc->post_ram_clear();
728 		else
729 			dev_warn(&pdev->dev,
730 				 "RAM-Clear IRQ just occurred!\n");
731 	}
732 	ds1685_rtc_switch_to_bank0(rtc);
733 
734 	mutex_unlock(rtc_mutex);
735 }
736 /* ----------------------------------------------------------------------- */
737 
738 
739 /* ----------------------------------------------------------------------- */
740 /* ProcFS interface */
741 
742 #ifdef CONFIG_PROC_FS
743 #define NUM_REGS	6	/* Num of control registers. */
744 #define NUM_BITS	8	/* Num bits per register. */
745 #define NUM_SPACES	4	/* Num spaces between each bit. */
746 
747 /*
748  * Periodic Interrupt Rates.
749  */
750 static const char *ds1685_rtc_pirq_rate[16] = {
751 	"none", "3.90625ms", "7.8125ms", "0.122070ms", "0.244141ms",
752 	"0.488281ms", "0.9765625ms", "1.953125ms", "3.90625ms", "7.8125ms",
753 	"15.625ms", "31.25ms", "62.5ms", "125ms", "250ms", "500ms"
754 };
755 
756 /*
757  * Square-Wave Output Frequencies.
758  */
759 static const char *ds1685_rtc_sqw_freq[16] = {
760 	"none", "256Hz", "128Hz", "8192Hz", "4096Hz", "2048Hz", "1024Hz",
761 	"512Hz", "256Hz", "128Hz", "64Hz", "32Hz", "16Hz", "8Hz", "4Hz", "2Hz"
762 };
763 
764 #ifdef CONFIG_RTC_DS1685_PROC_REGS
765 /**
766  * ds1685_rtc_print_regs - helper function to print register values.
767  * @hex: hex byte to convert into binary bits.
768  * @dest: destination char array.
769  *
770  * This is basically a hex->binary function, just with extra spacing between
771  * the digits.  It only works on 1-byte values (8 bits).
772  */
773 static char*
774 ds1685_rtc_print_regs(u8 hex, char *dest)
775 {
776 	u32 i, j;
777 	char *tmp = dest;
778 
779 	for (i = 0; i < NUM_BITS; i++) {
780 		*tmp++ = ((hex & 0x80) != 0 ? '1' : '0');
781 		for (j = 0; j < NUM_SPACES; j++)
782 			*tmp++ = ' ';
783 		hex <<= 1;
784 	}
785 	*tmp++ = '\0';
786 
787 	return dest;
788 }
789 #endif
790 
791 /**
792  * ds1685_rtc_proc - procfs access function.
793  * @dev: pointer to device structure.
794  * @seq: pointer to seq_file structure.
795  */
796 static int
797 ds1685_rtc_proc(struct device *dev, struct seq_file *seq)
798 {
799 	struct platform_device *pdev = to_platform_device(dev);
800 	struct ds1685_priv *rtc = platform_get_drvdata(pdev);
801 	u8 ctrla, ctrlb, ctrlc, ctrld, ctrl4a, ctrl4b, ssn[8];
802 	char *model = '\0';
803 #ifdef CONFIG_RTC_DS1685_PROC_REGS
804 	char bits[NUM_REGS][(NUM_BITS * NUM_SPACES) + NUM_BITS + 1];
805 #endif
806 
807 	/* Read all the relevant data from the control registers. */
808 	ds1685_rtc_switch_to_bank1(rtc);
809 	ds1685_rtc_get_ssn(rtc, ssn);
810 	ctrla = rtc->read(rtc, RTC_CTRL_A);
811 	ctrlb = rtc->read(rtc, RTC_CTRL_B);
812 	ctrlc = rtc->read(rtc, RTC_CTRL_C);
813 	ctrld = rtc->read(rtc, RTC_CTRL_D);
814 	ctrl4a = rtc->read(rtc, RTC_EXT_CTRL_4A);
815 	ctrl4b = rtc->read(rtc, RTC_EXT_CTRL_4B);
816 	ds1685_rtc_switch_to_bank0(rtc);
817 
818 	/* Determine the RTC model. */
819 	switch (ssn[0]) {
820 	case RTC_MODEL_DS1685:
821 		model = "DS1685/DS1687\0";
822 		break;
823 	case RTC_MODEL_DS1689:
824 		model = "DS1689/DS1693\0";
825 		break;
826 	case RTC_MODEL_DS17285:
827 		model = "DS17285/DS17287\0";
828 		break;
829 	case RTC_MODEL_DS17485:
830 		model = "DS17485/DS17487\0";
831 		break;
832 	case RTC_MODEL_DS17885:
833 		model = "DS17885/DS17887\0";
834 		break;
835 	default:
836 		model = "Unknown\0";
837 		break;
838 	}
839 
840 	/* Print out the information. */
841 	seq_printf(seq,
842 	   "Model\t\t: %s\n"
843 	   "Oscillator\t: %s\n"
844 	   "12/24hr\t\t: %s\n"
845 	   "DST\t\t: %s\n"
846 	   "Data mode\t: %s\n"
847 	   "Battery\t\t: %s\n"
848 	   "Aux batt\t: %s\n"
849 	   "Update IRQ\t: %s\n"
850 	   "Periodic IRQ\t: %s\n"
851 	   "Periodic Rate\t: %s\n"
852 	   "SQW Freq\t: %s\n"
853 #ifdef CONFIG_RTC_DS1685_PROC_REGS
854 	   "Serial #\t: %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n"
855 	   "Register Status\t:\n"
856 	   "   Ctrl A\t: UIP  DV2  DV1  DV0  RS3  RS2  RS1  RS0\n"
857 	   "\t\t:  %s\n"
858 	   "   Ctrl B\t: SET  PIE  AIE  UIE  SQWE  DM  2412 DSE\n"
859 	   "\t\t:  %s\n"
860 	   "   Ctrl C\t: IRQF  PF   AF   UF  ---  ---  ---  ---\n"
861 	   "\t\t:  %s\n"
862 	   "   Ctrl D\t: VRT  ---  ---  ---  ---  ---  ---  ---\n"
863 	   "\t\t:  %s\n"
864 #if !defined(CONFIG_RTC_DRV_DS1685) && !defined(CONFIG_RTC_DRV_DS1689)
865 	   "   Ctrl 4A\t: VRT2 INCR BME  ---  PAB   RF   WF   KF\n"
866 #else
867 	   "   Ctrl 4A\t: VRT2 INCR ---  ---  PAB   RF   WF   KF\n"
868 #endif
869 	   "\t\t:  %s\n"
870 	   "   Ctrl 4B\t: ABE  E32k  CS  RCE  PRS  RIE  WIE  KSE\n"
871 	   "\t\t:  %s\n",
872 #else
873 	   "Serial #\t: %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
874 #endif
875 	   model,
876 	   ((ctrla & RTC_CTRL_A_DV1) ? "enabled" : "disabled"),
877 	   ((ctrlb & RTC_CTRL_B_2412) ? "24-hour" : "12-hour"),
878 	   ((ctrlb & RTC_CTRL_B_DSE) ? "enabled" : "disabled"),
879 	   ((ctrlb & RTC_CTRL_B_DM) ? "binary" : "BCD"),
880 	   ((ctrld & RTC_CTRL_D_VRT) ? "ok" : "exhausted or n/a"),
881 	   ((ctrl4a & RTC_CTRL_4A_VRT2) ? "ok" : "exhausted or n/a"),
882 	   ((ctrlb & RTC_CTRL_B_UIE) ? "yes" : "no"),
883 	   ((ctrlb & RTC_CTRL_B_PIE) ? "yes" : "no"),
884 	   (!(ctrl4b & RTC_CTRL_4B_E32K) ?
885 	    ds1685_rtc_pirq_rate[(ctrla & RTC_CTRL_A_RS_MASK)] : "none"),
886 	   (!((ctrl4b & RTC_CTRL_4B_E32K)) ?
887 	    ds1685_rtc_sqw_freq[(ctrla & RTC_CTRL_A_RS_MASK)] : "32768Hz"),
888 #ifdef CONFIG_RTC_DS1685_PROC_REGS
889 	   ssn[0], ssn[1], ssn[2], ssn[3], ssn[4], ssn[5], ssn[6], ssn[7],
890 	   ds1685_rtc_print_regs(ctrla, bits[0]),
891 	   ds1685_rtc_print_regs(ctrlb, bits[1]),
892 	   ds1685_rtc_print_regs(ctrlc, bits[2]),
893 	   ds1685_rtc_print_regs(ctrld, bits[3]),
894 	   ds1685_rtc_print_regs(ctrl4a, bits[4]),
895 	   ds1685_rtc_print_regs(ctrl4b, bits[5]));
896 #else
897 	   ssn[0], ssn[1], ssn[2], ssn[3], ssn[4], ssn[5], ssn[6], ssn[7]);
898 #endif
899 	return 0;
900 }
901 #else
902 #define ds1685_rtc_proc NULL
903 #endif /* CONFIG_PROC_FS */
904 /* ----------------------------------------------------------------------- */
905 
906 
907 /* ----------------------------------------------------------------------- */
908 /* RTC Class operations */
909 
910 static const struct rtc_class_ops
911 ds1685_rtc_ops = {
912 	.proc = ds1685_rtc_proc,
913 	.read_time = ds1685_rtc_read_time,
914 	.set_time = ds1685_rtc_set_time,
915 	.read_alarm = ds1685_rtc_read_alarm,
916 	.set_alarm = ds1685_rtc_set_alarm,
917 	.alarm_irq_enable = ds1685_rtc_alarm_irq_enable,
918 };
919 /* ----------------------------------------------------------------------- */
920 
921 
922 /* ----------------------------------------------------------------------- */
923 /* SysFS interface */
924 
925 #ifdef CONFIG_SYSFS
926 /**
927  * ds1685_rtc_sysfs_nvram_read - reads rtc nvram via sysfs.
928  * @file: pointer to file structure.
929  * @kobj: pointer to kobject structure.
930  * @bin_attr: pointer to bin_attribute structure.
931  * @buf: pointer to char array to hold the output.
932  * @pos: current file position pointer.
933  * @size: size of the data to read.
934  */
935 static ssize_t
936 ds1685_rtc_sysfs_nvram_read(struct file *filp, struct kobject *kobj,
937 			    struct bin_attribute *bin_attr, char *buf,
938 			    loff_t pos, size_t size)
939 {
940 	struct platform_device *pdev =
941 		to_platform_device(container_of(kobj, struct device, kobj));
942 	struct ds1685_priv *rtc = platform_get_drvdata(pdev);
943 	ssize_t count;
944 	unsigned long flags = 0;
945 
946 	spin_lock_irqsave(&rtc->lock, flags);
947 	ds1685_rtc_switch_to_bank0(rtc);
948 
949 	/* Read NVRAM in time and bank0 registers. */
950 	for (count = 0; size > 0 && pos < NVRAM_TOTAL_SZ_BANK0;
951 	     count++, size--) {
952 		if (count < NVRAM_SZ_TIME)
953 			*buf++ = rtc->read(rtc, (NVRAM_TIME_BASE + pos++));
954 		else
955 			*buf++ = rtc->read(rtc, (NVRAM_BANK0_BASE + pos++));
956 	}
957 
958 #ifndef CONFIG_RTC_DRV_DS1689
959 	if (size > 0) {
960 		ds1685_rtc_switch_to_bank1(rtc);
961 
962 #ifndef CONFIG_RTC_DRV_DS1685
963 		/* Enable burst-mode on DS17x85/DS17x87 */
964 		rtc->write(rtc, RTC_EXT_CTRL_4A,
965 			   (rtc->read(rtc, RTC_EXT_CTRL_4A) |
966 			    RTC_CTRL_4A_BME));
967 
968 		/* We need one write to RTC_BANK1_RAM_ADDR_LSB to start
969 		 * reading with burst-mode */
970 		rtc->write(rtc, RTC_BANK1_RAM_ADDR_LSB,
971 			   (pos - NVRAM_TOTAL_SZ_BANK0));
972 #endif
973 
974 		/* Read NVRAM in bank1 registers. */
975 		for (count = 0; size > 0 && pos < NVRAM_TOTAL_SZ;
976 		     count++, size--) {
977 #ifdef CONFIG_RTC_DRV_DS1685
978 			/* DS1685/DS1687 has to write to RTC_BANK1_RAM_ADDR
979 			 * before each read. */
980 			rtc->write(rtc, RTC_BANK1_RAM_ADDR,
981 				   (pos - NVRAM_TOTAL_SZ_BANK0));
982 #endif
983 			*buf++ = rtc->read(rtc, RTC_BANK1_RAM_DATA_PORT);
984 			pos++;
985 		}
986 
987 #ifndef CONFIG_RTC_DRV_DS1685
988 		/* Disable burst-mode on DS17x85/DS17x87 */
989 		rtc->write(rtc, RTC_EXT_CTRL_4A,
990 			   (rtc->read(rtc, RTC_EXT_CTRL_4A) &
991 			    ~(RTC_CTRL_4A_BME)));
992 #endif
993 		ds1685_rtc_switch_to_bank0(rtc);
994 	}
995 #endif /* !CONFIG_RTC_DRV_DS1689 */
996 	spin_unlock_irqrestore(&rtc->lock, flags);
997 
998 	/*
999 	 * XXX: Bug? this appears to cause the function to get executed
1000 	 * several times in succession.  But it's the only way to actually get
1001 	 * data written out to a file.
1002 	 */
1003 	return count;
1004 }
1005 
1006 /**
1007  * ds1685_rtc_sysfs_nvram_write - writes rtc nvram via sysfs.
1008  * @file: pointer to file structure.
1009  * @kobj: pointer to kobject structure.
1010  * @bin_attr: pointer to bin_attribute structure.
1011  * @buf: pointer to char array to hold the input.
1012  * @pos: current file position pointer.
1013  * @size: size of the data to write.
1014  */
1015 static ssize_t
1016 ds1685_rtc_sysfs_nvram_write(struct file *filp, struct kobject *kobj,
1017 			     struct bin_attribute *bin_attr, char *buf,
1018 			     loff_t pos, size_t size)
1019 {
1020 	struct platform_device *pdev =
1021 		to_platform_device(container_of(kobj, struct device, kobj));
1022 	struct ds1685_priv *rtc = platform_get_drvdata(pdev);
1023 	ssize_t count;
1024 	unsigned long flags = 0;
1025 
1026 	spin_lock_irqsave(&rtc->lock, flags);
1027 	ds1685_rtc_switch_to_bank0(rtc);
1028 
1029 	/* Write NVRAM in time and bank0 registers. */
1030 	for (count = 0; size > 0 && pos < NVRAM_TOTAL_SZ_BANK0;
1031 	     count++, size--)
1032 		if (count < NVRAM_SZ_TIME)
1033 			rtc->write(rtc, (NVRAM_TIME_BASE + pos++),
1034 				   *buf++);
1035 		else
1036 			rtc->write(rtc, (NVRAM_BANK0_BASE), *buf++);
1037 
1038 #ifndef CONFIG_RTC_DRV_DS1689
1039 	if (size > 0) {
1040 		ds1685_rtc_switch_to_bank1(rtc);
1041 
1042 #ifndef CONFIG_RTC_DRV_DS1685
1043 		/* Enable burst-mode on DS17x85/DS17x87 */
1044 		rtc->write(rtc, RTC_EXT_CTRL_4A,
1045 			   (rtc->read(rtc, RTC_EXT_CTRL_4A) |
1046 			    RTC_CTRL_4A_BME));
1047 
1048 		/* We need one write to RTC_BANK1_RAM_ADDR_LSB to start
1049 		 * writing with burst-mode */
1050 		rtc->write(rtc, RTC_BANK1_RAM_ADDR_LSB,
1051 			   (pos - NVRAM_TOTAL_SZ_BANK0));
1052 #endif
1053 
1054 		/* Write NVRAM in bank1 registers. */
1055 		for (count = 0; size > 0 && pos < NVRAM_TOTAL_SZ;
1056 		     count++, size--) {
1057 #ifdef CONFIG_RTC_DRV_DS1685
1058 			/* DS1685/DS1687 has to write to RTC_BANK1_RAM_ADDR
1059 			 * before each read. */
1060 			rtc->write(rtc, RTC_BANK1_RAM_ADDR,
1061 				   (pos - NVRAM_TOTAL_SZ_BANK0));
1062 #endif
1063 			rtc->write(rtc, RTC_BANK1_RAM_DATA_PORT, *buf++);
1064 			pos++;
1065 		}
1066 
1067 #ifndef CONFIG_RTC_DRV_DS1685
1068 		/* Disable burst-mode on DS17x85/DS17x87 */
1069 		rtc->write(rtc, RTC_EXT_CTRL_4A,
1070 			   (rtc->read(rtc, RTC_EXT_CTRL_4A) &
1071 			    ~(RTC_CTRL_4A_BME)));
1072 #endif
1073 		ds1685_rtc_switch_to_bank0(rtc);
1074 	}
1075 #endif /* !CONFIG_RTC_DRV_DS1689 */
1076 	spin_unlock_irqrestore(&rtc->lock, flags);
1077 
1078 	return count;
1079 }
1080 
1081 /**
1082  * struct ds1685_rtc_sysfs_nvram_attr - sysfs attributes for rtc nvram.
1083  * @attr: nvram attributes.
1084  * @read: nvram read function.
1085  * @write: nvram write function.
1086  * @size: nvram total size (bank0 + extended).
1087  */
1088 static struct bin_attribute
1089 ds1685_rtc_sysfs_nvram_attr = {
1090 	.attr = {
1091 		.name = "nvram",
1092 		.mode = S_IRUGO | S_IWUSR,
1093 	},
1094 	.read = ds1685_rtc_sysfs_nvram_read,
1095 	.write = ds1685_rtc_sysfs_nvram_write,
1096 	.size = NVRAM_TOTAL_SZ
1097 };
1098 
1099 /**
1100  * ds1685_rtc_sysfs_battery_show - sysfs file for main battery status.
1101  * @dev: pointer to device structure.
1102  * @attr: pointer to device_attribute structure.
1103  * @buf: pointer to char array to hold the output.
1104  */
1105 static ssize_t
1106 ds1685_rtc_sysfs_battery_show(struct device *dev,
1107 			      struct device_attribute *attr, char *buf)
1108 {
1109 	struct platform_device *pdev = to_platform_device(dev);
1110 	struct ds1685_priv *rtc = platform_get_drvdata(pdev);
1111 	u8 ctrld;
1112 
1113 	ctrld = rtc->read(rtc, RTC_CTRL_D);
1114 
1115 	return snprintf(buf, 13, "%s\n",
1116 			(ctrld & RTC_CTRL_D_VRT) ? "ok" : "not ok or N/A");
1117 }
1118 static DEVICE_ATTR(battery, S_IRUGO, ds1685_rtc_sysfs_battery_show, NULL);
1119 
1120 /**
1121  * ds1685_rtc_sysfs_auxbatt_show - sysfs file for aux battery status.
1122  * @dev: pointer to device structure.
1123  * @attr: pointer to device_attribute structure.
1124  * @buf: pointer to char array to hold the output.
1125  */
1126 static ssize_t
1127 ds1685_rtc_sysfs_auxbatt_show(struct device *dev,
1128 			      struct device_attribute *attr, char *buf)
1129 {
1130 	struct platform_device *pdev = to_platform_device(dev);
1131 	struct ds1685_priv *rtc = platform_get_drvdata(pdev);
1132 	u8 ctrl4a;
1133 
1134 	ds1685_rtc_switch_to_bank1(rtc);
1135 	ctrl4a = rtc->read(rtc, RTC_EXT_CTRL_4A);
1136 	ds1685_rtc_switch_to_bank0(rtc);
1137 
1138 	return snprintf(buf, 13, "%s\n",
1139 			(ctrl4a & RTC_CTRL_4A_VRT2) ? "ok" : "not ok or N/A");
1140 }
1141 static DEVICE_ATTR(auxbatt, S_IRUGO, ds1685_rtc_sysfs_auxbatt_show, NULL);
1142 
1143 /**
1144  * ds1685_rtc_sysfs_serial_show - sysfs file for silicon serial number.
1145  * @dev: pointer to device structure.
1146  * @attr: pointer to device_attribute structure.
1147  * @buf: pointer to char array to hold the output.
1148  */
1149 static ssize_t
1150 ds1685_rtc_sysfs_serial_show(struct device *dev,
1151 			     struct device_attribute *attr, char *buf)
1152 {
1153 	struct platform_device *pdev = to_platform_device(dev);
1154 	struct ds1685_priv *rtc = platform_get_drvdata(pdev);
1155 	u8 ssn[8];
1156 
1157 	ds1685_rtc_switch_to_bank1(rtc);
1158 	ds1685_rtc_get_ssn(rtc, ssn);
1159 	ds1685_rtc_switch_to_bank0(rtc);
1160 
1161 	return snprintf(buf, 24, "%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
1162 			ssn[0], ssn[1], ssn[2], ssn[3], ssn[4], ssn[5],
1163 			ssn[6], ssn[7]);
1164 
1165 	return 0;
1166 }
1167 static DEVICE_ATTR(serial, S_IRUGO, ds1685_rtc_sysfs_serial_show, NULL);
1168 
1169 /**
1170  * struct ds1685_rtc_sysfs_misc_attrs - list for misc RTC features.
1171  */
1172 static struct attribute*
1173 ds1685_rtc_sysfs_misc_attrs[] = {
1174 	&dev_attr_battery.attr,
1175 	&dev_attr_auxbatt.attr,
1176 	&dev_attr_serial.attr,
1177 	NULL,
1178 };
1179 
1180 /**
1181  * struct ds1685_rtc_sysfs_misc_grp - attr group for misc RTC features.
1182  */
1183 static const struct attribute_group
1184 ds1685_rtc_sysfs_misc_grp = {
1185 	.name = "misc",
1186 	.attrs = ds1685_rtc_sysfs_misc_attrs,
1187 };
1188 
1189 #ifdef CONFIG_RTC_DS1685_SYSFS_REGS
1190 /**
1191  * struct ds1685_rtc_ctrl_regs.
1192  * @name: char pointer for the bit name.
1193  * @reg: control register the bit is in.
1194  * @bit: the bit's offset in the register.
1195  */
1196 struct ds1685_rtc_ctrl_regs {
1197 	const char *name;
1198 	const u8 reg;
1199 	const u8 bit;
1200 };
1201 
1202 /*
1203  * Ctrl register bit lookup table.
1204  */
1205 static const struct ds1685_rtc_ctrl_regs
1206 ds1685_ctrl_regs_table[] = {
1207 	{ "uip",  RTC_CTRL_A,      RTC_CTRL_A_UIP   },
1208 	{ "dv2",  RTC_CTRL_A,      RTC_CTRL_A_DV2   },
1209 	{ "dv1",  RTC_CTRL_A,      RTC_CTRL_A_DV1   },
1210 	{ "dv0",  RTC_CTRL_A,      RTC_CTRL_A_DV0   },
1211 	{ "rs3",  RTC_CTRL_A,      RTC_CTRL_A_RS3   },
1212 	{ "rs2",  RTC_CTRL_A,      RTC_CTRL_A_RS2   },
1213 	{ "rs1",  RTC_CTRL_A,      RTC_CTRL_A_RS1   },
1214 	{ "rs0",  RTC_CTRL_A,      RTC_CTRL_A_RS0   },
1215 	{ "set",  RTC_CTRL_B,      RTC_CTRL_B_SET   },
1216 	{ "pie",  RTC_CTRL_B,      RTC_CTRL_B_PIE   },
1217 	{ "aie",  RTC_CTRL_B,      RTC_CTRL_B_AIE   },
1218 	{ "uie",  RTC_CTRL_B,      RTC_CTRL_B_UIE   },
1219 	{ "sqwe", RTC_CTRL_B,      RTC_CTRL_B_SQWE  },
1220 	{ "dm",   RTC_CTRL_B,      RTC_CTRL_B_DM    },
1221 	{ "2412", RTC_CTRL_B,      RTC_CTRL_B_2412  },
1222 	{ "dse",  RTC_CTRL_B,      RTC_CTRL_B_DSE   },
1223 	{ "irqf", RTC_CTRL_C,      RTC_CTRL_C_IRQF  },
1224 	{ "pf",   RTC_CTRL_C,      RTC_CTRL_C_PF    },
1225 	{ "af",   RTC_CTRL_C,      RTC_CTRL_C_AF    },
1226 	{ "uf",   RTC_CTRL_C,      RTC_CTRL_C_UF    },
1227 	{ "vrt",  RTC_CTRL_D,      RTC_CTRL_D_VRT   },
1228 	{ "vrt2", RTC_EXT_CTRL_4A, RTC_CTRL_4A_VRT2 },
1229 	{ "incr", RTC_EXT_CTRL_4A, RTC_CTRL_4A_INCR },
1230 	{ "pab",  RTC_EXT_CTRL_4A, RTC_CTRL_4A_PAB  },
1231 	{ "rf",   RTC_EXT_CTRL_4A, RTC_CTRL_4A_RF   },
1232 	{ "wf",   RTC_EXT_CTRL_4A, RTC_CTRL_4A_WF   },
1233 	{ "kf",   RTC_EXT_CTRL_4A, RTC_CTRL_4A_KF   },
1234 #if !defined(CONFIG_RTC_DRV_DS1685) && !defined(CONFIG_RTC_DRV_DS1689)
1235 	{ "bme",  RTC_EXT_CTRL_4A, RTC_CTRL_4A_BME  },
1236 #endif
1237 	{ "abe",  RTC_EXT_CTRL_4B, RTC_CTRL_4B_ABE  },
1238 	{ "e32k", RTC_EXT_CTRL_4B, RTC_CTRL_4B_E32K },
1239 	{ "cs",   RTC_EXT_CTRL_4B, RTC_CTRL_4B_CS   },
1240 	{ "rce",  RTC_EXT_CTRL_4B, RTC_CTRL_4B_RCE  },
1241 	{ "prs",  RTC_EXT_CTRL_4B, RTC_CTRL_4B_PRS  },
1242 	{ "rie",  RTC_EXT_CTRL_4B, RTC_CTRL_4B_RIE  },
1243 	{ "wie",  RTC_EXT_CTRL_4B, RTC_CTRL_4B_WIE  },
1244 	{ "kse",  RTC_EXT_CTRL_4B, RTC_CTRL_4B_KSE  },
1245 	{ NULL,   0,               0                },
1246 };
1247 
1248 /**
1249  * ds1685_rtc_sysfs_ctrl_regs_lookup - ctrl register bit lookup function.
1250  * @name: ctrl register bit to look up in ds1685_ctrl_regs_table.
1251  */
1252 static const struct ds1685_rtc_ctrl_regs*
1253 ds1685_rtc_sysfs_ctrl_regs_lookup(const char *name)
1254 {
1255 	const struct ds1685_rtc_ctrl_regs *p = ds1685_ctrl_regs_table;
1256 
1257 	for (; p->name != NULL; ++p)
1258 		if (strcmp(p->name, name) == 0)
1259 			return p;
1260 
1261 	return NULL;
1262 }
1263 
1264 /**
1265  * ds1685_rtc_sysfs_ctrl_regs_show - reads a ctrl register bit via sysfs.
1266  * @dev: pointer to device structure.
1267  * @attr: pointer to device_attribute structure.
1268  * @buf: pointer to char array to hold the output.
1269  */
1270 static ssize_t
1271 ds1685_rtc_sysfs_ctrl_regs_show(struct device *dev,
1272 				struct device_attribute *attr, char *buf)
1273 {
1274 	u8 tmp;
1275 	struct ds1685_priv *rtc = dev_get_drvdata(dev);
1276 	const struct ds1685_rtc_ctrl_regs *reg_info =
1277 		ds1685_rtc_sysfs_ctrl_regs_lookup(attr->attr.name);
1278 
1279 	/* Make sure we actually matched something. */
1280 	if (!reg_info)
1281 		return -EINVAL;
1282 
1283 	/* No spinlock during a read -- mutex is already held. */
1284 	ds1685_rtc_switch_to_bank1(rtc);
1285 	tmp = rtc->read(rtc, reg_info->reg) & reg_info->bit;
1286 	ds1685_rtc_switch_to_bank0(rtc);
1287 
1288 	return snprintf(buf, 2, "%d\n", (tmp ? 1 : 0));
1289 }
1290 
1291 /**
1292  * ds1685_rtc_sysfs_ctrl_regs_store - writes a ctrl register bit via sysfs.
1293  * @dev: pointer to device structure.
1294  * @attr: pointer to device_attribute structure.
1295  * @buf: pointer to char array to hold the output.
1296  * @count: number of bytes written.
1297  */
1298 static ssize_t
1299 ds1685_rtc_sysfs_ctrl_regs_store(struct device *dev,
1300 				 struct device_attribute *attr,
1301 				 const char *buf, size_t count)
1302 {
1303 	struct ds1685_priv *rtc = dev_get_drvdata(dev);
1304 	u8 reg = 0, bit = 0, tmp;
1305 	unsigned long flags = 0;
1306 	long int val = 0;
1307 	const struct ds1685_rtc_ctrl_regs *reg_info =
1308 		ds1685_rtc_sysfs_ctrl_regs_lookup(attr->attr.name);
1309 
1310 	/* We only accept numbers. */
1311 	if (kstrtol(buf, 10, &val) < 0)
1312 		return -EINVAL;
1313 
1314 	/* bits are binary, 0 or 1 only. */
1315 	if ((val != 0) && (val != 1))
1316 		return -ERANGE;
1317 
1318 	/* Make sure we actually matched something. */
1319 	if (!reg_info)
1320 		return -EINVAL;
1321 
1322 	reg = reg_info->reg;
1323 	bit = reg_info->bit;
1324 
1325 	/* Safe to spinlock during a write. */
1326 	ds1685_rtc_begin_ctrl_access(rtc, flags);
1327 	tmp = rtc->read(rtc, reg);
1328 	rtc->write(rtc, reg, (val ? (tmp | bit) : (tmp & ~(bit))));
1329 	ds1685_rtc_end_ctrl_access(rtc, flags);
1330 
1331 	return count;
1332 }
1333 
1334 /**
1335  * DS1685_RTC_SYSFS_CTRL_REG_RO - device_attribute for read-only register bit.
1336  * @bit: bit to read.
1337  */
1338 #define DS1685_RTC_SYSFS_CTRL_REG_RO(bit)				\
1339 	static DEVICE_ATTR(bit, S_IRUGO,				\
1340 	ds1685_rtc_sysfs_ctrl_regs_show, NULL)
1341 
1342 /**
1343  * DS1685_RTC_SYSFS_CTRL_REG_RW - device_attribute for read-write register bit.
1344  * @bit: bit to read or write.
1345  */
1346 #define DS1685_RTC_SYSFS_CTRL_REG_RW(bit)				\
1347 	static DEVICE_ATTR(bit, S_IRUGO | S_IWUSR,			\
1348 	ds1685_rtc_sysfs_ctrl_regs_show,				\
1349 	ds1685_rtc_sysfs_ctrl_regs_store)
1350 
1351 /*
1352  * Control Register A bits.
1353  */
1354 DS1685_RTC_SYSFS_CTRL_REG_RO(uip);
1355 DS1685_RTC_SYSFS_CTRL_REG_RW(dv2);
1356 DS1685_RTC_SYSFS_CTRL_REG_RW(dv1);
1357 DS1685_RTC_SYSFS_CTRL_REG_RO(dv0);
1358 DS1685_RTC_SYSFS_CTRL_REG_RW(rs3);
1359 DS1685_RTC_SYSFS_CTRL_REG_RW(rs2);
1360 DS1685_RTC_SYSFS_CTRL_REG_RW(rs1);
1361 DS1685_RTC_SYSFS_CTRL_REG_RW(rs0);
1362 
1363 static struct attribute*
1364 ds1685_rtc_sysfs_ctrla_attrs[] = {
1365 	&dev_attr_uip.attr,
1366 	&dev_attr_dv2.attr,
1367 	&dev_attr_dv1.attr,
1368 	&dev_attr_dv0.attr,
1369 	&dev_attr_rs3.attr,
1370 	&dev_attr_rs2.attr,
1371 	&dev_attr_rs1.attr,
1372 	&dev_attr_rs0.attr,
1373 	NULL,
1374 };
1375 
1376 static const struct attribute_group
1377 ds1685_rtc_sysfs_ctrla_grp = {
1378 	.name = "ctrla",
1379 	.attrs = ds1685_rtc_sysfs_ctrla_attrs,
1380 };
1381 
1382 
1383 /*
1384  * Control Register B bits.
1385  */
1386 DS1685_RTC_SYSFS_CTRL_REG_RO(set);
1387 DS1685_RTC_SYSFS_CTRL_REG_RW(pie);
1388 DS1685_RTC_SYSFS_CTRL_REG_RW(aie);
1389 DS1685_RTC_SYSFS_CTRL_REG_RW(uie);
1390 DS1685_RTC_SYSFS_CTRL_REG_RW(sqwe);
1391 DS1685_RTC_SYSFS_CTRL_REG_RO(dm);
1392 DS1685_RTC_SYSFS_CTRL_REG_RO(2412);
1393 DS1685_RTC_SYSFS_CTRL_REG_RO(dse);
1394 
1395 static struct attribute*
1396 ds1685_rtc_sysfs_ctrlb_attrs[] = {
1397 	&dev_attr_set.attr,
1398 	&dev_attr_pie.attr,
1399 	&dev_attr_aie.attr,
1400 	&dev_attr_uie.attr,
1401 	&dev_attr_sqwe.attr,
1402 	&dev_attr_dm.attr,
1403 	&dev_attr_2412.attr,
1404 	&dev_attr_dse.attr,
1405 	NULL,
1406 };
1407 
1408 static const struct attribute_group
1409 ds1685_rtc_sysfs_ctrlb_grp = {
1410 	.name = "ctrlb",
1411 	.attrs = ds1685_rtc_sysfs_ctrlb_attrs,
1412 };
1413 
1414 /*
1415  * Control Register C bits.
1416  *
1417  * Reading Control C clears these bits!  Reading them individually can
1418  * possibly cause an interrupt to be missed.  Use the /proc interface
1419  * to see all the bits in this register simultaneously.
1420  */
1421 DS1685_RTC_SYSFS_CTRL_REG_RO(irqf);
1422 DS1685_RTC_SYSFS_CTRL_REG_RO(pf);
1423 DS1685_RTC_SYSFS_CTRL_REG_RO(af);
1424 DS1685_RTC_SYSFS_CTRL_REG_RO(uf);
1425 
1426 static struct attribute*
1427 ds1685_rtc_sysfs_ctrlc_attrs[] = {
1428 	&dev_attr_irqf.attr,
1429 	&dev_attr_pf.attr,
1430 	&dev_attr_af.attr,
1431 	&dev_attr_uf.attr,
1432 	NULL,
1433 };
1434 
1435 static const struct attribute_group
1436 ds1685_rtc_sysfs_ctrlc_grp = {
1437 	.name = "ctrlc",
1438 	.attrs = ds1685_rtc_sysfs_ctrlc_attrs,
1439 };
1440 
1441 /*
1442  * Control Register D bits.
1443  */
1444 DS1685_RTC_SYSFS_CTRL_REG_RO(vrt);
1445 
1446 static struct attribute*
1447 ds1685_rtc_sysfs_ctrld_attrs[] = {
1448 	&dev_attr_vrt.attr,
1449 	NULL,
1450 };
1451 
1452 static const struct attribute_group
1453 ds1685_rtc_sysfs_ctrld_grp = {
1454 	.name = "ctrld",
1455 	.attrs = ds1685_rtc_sysfs_ctrld_attrs,
1456 };
1457 
1458 /*
1459  * Control Register 4A bits.
1460  */
1461 DS1685_RTC_SYSFS_CTRL_REG_RO(vrt2);
1462 DS1685_RTC_SYSFS_CTRL_REG_RO(incr);
1463 DS1685_RTC_SYSFS_CTRL_REG_RW(pab);
1464 DS1685_RTC_SYSFS_CTRL_REG_RW(rf);
1465 DS1685_RTC_SYSFS_CTRL_REG_RW(wf);
1466 DS1685_RTC_SYSFS_CTRL_REG_RW(kf);
1467 #if !defined(CONFIG_RTC_DRV_DS1685) && !defined(CONFIG_RTC_DRV_DS1689)
1468 DS1685_RTC_SYSFS_CTRL_REG_RO(bme);
1469 #endif
1470 
1471 static struct attribute*
1472 ds1685_rtc_sysfs_ctrl4a_attrs[] = {
1473 	&dev_attr_vrt2.attr,
1474 	&dev_attr_incr.attr,
1475 	&dev_attr_pab.attr,
1476 	&dev_attr_rf.attr,
1477 	&dev_attr_wf.attr,
1478 	&dev_attr_kf.attr,
1479 #if !defined(CONFIG_RTC_DRV_DS1685) && !defined(CONFIG_RTC_DRV_DS1689)
1480 	&dev_attr_bme.attr,
1481 #endif
1482 	NULL,
1483 };
1484 
1485 static const struct attribute_group
1486 ds1685_rtc_sysfs_ctrl4a_grp = {
1487 	.name = "ctrl4a",
1488 	.attrs = ds1685_rtc_sysfs_ctrl4a_attrs,
1489 };
1490 
1491 /*
1492  * Control Register 4B bits.
1493  */
1494 DS1685_RTC_SYSFS_CTRL_REG_RW(abe);
1495 DS1685_RTC_SYSFS_CTRL_REG_RW(e32k);
1496 DS1685_RTC_SYSFS_CTRL_REG_RO(cs);
1497 DS1685_RTC_SYSFS_CTRL_REG_RW(rce);
1498 DS1685_RTC_SYSFS_CTRL_REG_RW(prs);
1499 DS1685_RTC_SYSFS_CTRL_REG_RW(rie);
1500 DS1685_RTC_SYSFS_CTRL_REG_RW(wie);
1501 DS1685_RTC_SYSFS_CTRL_REG_RW(kse);
1502 
1503 static struct attribute*
1504 ds1685_rtc_sysfs_ctrl4b_attrs[] = {
1505 	&dev_attr_abe.attr,
1506 	&dev_attr_e32k.attr,
1507 	&dev_attr_cs.attr,
1508 	&dev_attr_rce.attr,
1509 	&dev_attr_prs.attr,
1510 	&dev_attr_rie.attr,
1511 	&dev_attr_wie.attr,
1512 	&dev_attr_kse.attr,
1513 	NULL,
1514 };
1515 
1516 static const struct attribute_group
1517 ds1685_rtc_sysfs_ctrl4b_grp = {
1518 	.name = "ctrl4b",
1519 	.attrs = ds1685_rtc_sysfs_ctrl4b_attrs,
1520 };
1521 
1522 
1523 /**
1524  * struct ds1685_rtc_ctrl_regs.
1525  * @name: char pointer for the bit name.
1526  * @reg: control register the bit is in.
1527  * @bit: the bit's offset in the register.
1528  */
1529 struct ds1685_rtc_time_regs {
1530 	const char *name;
1531 	const u8 reg;
1532 	const u8 mask;
1533 	const u8 min;
1534 	const u8 max;
1535 };
1536 
1537 /*
1538  * Time/Date register lookup tables.
1539  */
1540 static const struct ds1685_rtc_time_regs
1541 ds1685_time_regs_bcd_table[] = {
1542 	{ "seconds",       RTC_SECS,       RTC_SECS_BCD_MASK,   0, 59 },
1543 	{ "minutes",       RTC_MINS,       RTC_MINS_BCD_MASK,   0, 59 },
1544 	{ "hours",         RTC_HRS,        RTC_HRS_24_BCD_MASK, 0, 23 },
1545 	{ "wday",          RTC_WDAY,       RTC_WDAY_MASK,       1,  7 },
1546 	{ "mday",          RTC_MDAY,       RTC_MDAY_BCD_MASK,   1, 31 },
1547 	{ "month",         RTC_MONTH,      RTC_MONTH_BCD_MASK,  1, 12 },
1548 	{ "year",          RTC_YEAR,       RTC_YEAR_BCD_MASK,   0, 99 },
1549 	{ "century",       RTC_CENTURY,    RTC_CENTURY_MASK,    0, 99 },
1550 	{ "alarm_seconds", RTC_SECS_ALARM, RTC_SECS_BCD_MASK,   0, 59 },
1551 	{ "alarm_minutes", RTC_MINS_ALARM, RTC_MINS_BCD_MASK,   0, 59 },
1552 	{ "alarm_hours",   RTC_HRS_ALARM,  RTC_HRS_24_BCD_MASK, 0, 23 },
1553 	{ "alarm_mday",    RTC_MDAY_ALARM, RTC_MDAY_ALARM_MASK, 1, 31 },
1554 	{ NULL,            0,              0,                   0,  0 },
1555 };
1556 
1557 static const struct ds1685_rtc_time_regs
1558 ds1685_time_regs_bin_table[] = {
1559 	{ "seconds",       RTC_SECS,       RTC_SECS_BIN_MASK,   0x00, 0x3b },
1560 	{ "minutes",       RTC_MINS,       RTC_MINS_BIN_MASK,   0x00, 0x3b },
1561 	{ "hours",         RTC_HRS,        RTC_HRS_24_BIN_MASK, 0x00, 0x17 },
1562 	{ "wday",          RTC_WDAY,       RTC_WDAY_MASK,       0x01, 0x07 },
1563 	{ "mday",          RTC_MDAY,       RTC_MDAY_BIN_MASK,   0x01, 0x1f },
1564 	{ "month",         RTC_MONTH,      RTC_MONTH_BIN_MASK,  0x01, 0x0c },
1565 	{ "year",          RTC_YEAR,       RTC_YEAR_BIN_MASK,   0x00, 0x63 },
1566 	{ "century",       RTC_CENTURY,    RTC_CENTURY_MASK,    0x00, 0x63 },
1567 	{ "alarm_seconds", RTC_SECS_ALARM, RTC_SECS_BIN_MASK,   0x00, 0x3b },
1568 	{ "alarm_minutes", RTC_MINS_ALARM, RTC_MINS_BIN_MASK,   0x00, 0x3b },
1569 	{ "alarm_hours",   RTC_HRS_ALARM,  RTC_HRS_24_BIN_MASK, 0x00, 0x17 },
1570 	{ "alarm_mday",    RTC_MDAY_ALARM, RTC_MDAY_ALARM_MASK, 0x01, 0x1f },
1571 	{ NULL,            0,              0,                   0x00, 0x00 },
1572 };
1573 
1574 /**
1575  * ds1685_rtc_sysfs_time_regs_bcd_lookup - time/date reg bit lookup function.
1576  * @name: register bit to look up in ds1685_time_regs_bcd_table.
1577  */
1578 static const struct ds1685_rtc_time_regs*
1579 ds1685_rtc_sysfs_time_regs_lookup(const char *name, bool bcd_mode)
1580 {
1581 	const struct ds1685_rtc_time_regs *p;
1582 
1583 	if (bcd_mode)
1584 		p = ds1685_time_regs_bcd_table;
1585 	else
1586 		p = ds1685_time_regs_bin_table;
1587 
1588 	for (; p->name != NULL; ++p)
1589 		if (strcmp(p->name, name) == 0)
1590 			return p;
1591 
1592 	return NULL;
1593 }
1594 
1595 /**
1596  * ds1685_rtc_sysfs_time_regs_show - reads a time/date register via sysfs.
1597  * @dev: pointer to device structure.
1598  * @attr: pointer to device_attribute structure.
1599  * @buf: pointer to char array to hold the output.
1600  */
1601 static ssize_t
1602 ds1685_rtc_sysfs_time_regs_show(struct device *dev,
1603 				struct device_attribute *attr, char *buf)
1604 {
1605 	u8 tmp;
1606 	struct ds1685_priv *rtc = dev_get_drvdata(dev);
1607 	const struct ds1685_rtc_time_regs *bcd_reg_info =
1608 		ds1685_rtc_sysfs_time_regs_lookup(attr->attr.name, true);
1609 	const struct ds1685_rtc_time_regs *bin_reg_info =
1610 		ds1685_rtc_sysfs_time_regs_lookup(attr->attr.name, false);
1611 
1612 	/* Make sure we actually matched something. */
1613 	if (!bcd_reg_info || !bin_reg_info)
1614 		return -EINVAL;
1615 
1616 	/* bcd_reg_info->reg == bin_reg_info->reg. */
1617 	ds1685_rtc_begin_data_access(rtc);
1618 	tmp = rtc->read(rtc, bcd_reg_info->reg);
1619 	ds1685_rtc_end_data_access(rtc);
1620 
1621 	tmp = ds1685_rtc_bcd2bin(rtc, tmp, bcd_reg_info->mask,
1622 				 bin_reg_info->mask);
1623 
1624 	return snprintf(buf, 4, "%d\n", tmp);
1625 }
1626 
1627 /**
1628  * ds1685_rtc_sysfs_time_regs_store - writes a time/date register via sysfs.
1629  * @dev: pointer to device structure.
1630  * @attr: pointer to device_attribute structure.
1631  * @buf: pointer to char array to hold the output.
1632  * @count: number of bytes written.
1633  */
1634 static ssize_t
1635 ds1685_rtc_sysfs_time_regs_store(struct device *dev,
1636 				 struct device_attribute *attr,
1637 				 const char *buf, size_t count)
1638 {
1639 	long int val = 0;
1640 	struct ds1685_priv *rtc = dev_get_drvdata(dev);
1641 	const struct ds1685_rtc_time_regs *bcd_reg_info =
1642 		ds1685_rtc_sysfs_time_regs_lookup(attr->attr.name, true);
1643 	const struct ds1685_rtc_time_regs *bin_reg_info =
1644 		ds1685_rtc_sysfs_time_regs_lookup(attr->attr.name, false);
1645 
1646 	/* We only accept numbers. */
1647 	if (kstrtol(buf, 10, &val) < 0)
1648 		return -EINVAL;
1649 
1650 	/* Make sure we actually matched something. */
1651 	if (!bcd_reg_info || !bin_reg_info)
1652 		return -EINVAL;
1653 
1654 	/* Check for a valid range. */
1655 	if (rtc->bcd_mode) {
1656 		if ((val < bcd_reg_info->min) || (val > bcd_reg_info->max))
1657 			return -ERANGE;
1658 	} else {
1659 		if ((val < bin_reg_info->min) || (val > bin_reg_info->max))
1660 			return -ERANGE;
1661 	}
1662 
1663 	val = ds1685_rtc_bin2bcd(rtc, val, bin_reg_info->mask,
1664 				 bcd_reg_info->mask);
1665 
1666 	/* bcd_reg_info->reg == bin_reg_info->reg. */
1667 	ds1685_rtc_begin_data_access(rtc);
1668 	rtc->write(rtc, bcd_reg_info->reg, val);
1669 	ds1685_rtc_end_data_access(rtc);
1670 
1671 	return count;
1672 }
1673 
1674 /**
1675  * DS1685_RTC_SYSFS_REG_RW - device_attribute for a read-write time register.
1676  * @reg: time/date register to read or write.
1677  */
1678 #define DS1685_RTC_SYSFS_TIME_REG_RW(reg)				\
1679 	static DEVICE_ATTR(reg, S_IRUGO | S_IWUSR,			\
1680 	ds1685_rtc_sysfs_time_regs_show,				\
1681 	ds1685_rtc_sysfs_time_regs_store)
1682 
1683 /*
1684  * Time/Date Register bits.
1685  */
1686 DS1685_RTC_SYSFS_TIME_REG_RW(seconds);
1687 DS1685_RTC_SYSFS_TIME_REG_RW(minutes);
1688 DS1685_RTC_SYSFS_TIME_REG_RW(hours);
1689 DS1685_RTC_SYSFS_TIME_REG_RW(wday);
1690 DS1685_RTC_SYSFS_TIME_REG_RW(mday);
1691 DS1685_RTC_SYSFS_TIME_REG_RW(month);
1692 DS1685_RTC_SYSFS_TIME_REG_RW(year);
1693 DS1685_RTC_SYSFS_TIME_REG_RW(century);
1694 DS1685_RTC_SYSFS_TIME_REG_RW(alarm_seconds);
1695 DS1685_RTC_SYSFS_TIME_REG_RW(alarm_minutes);
1696 DS1685_RTC_SYSFS_TIME_REG_RW(alarm_hours);
1697 DS1685_RTC_SYSFS_TIME_REG_RW(alarm_mday);
1698 
1699 static struct attribute*
1700 ds1685_rtc_sysfs_time_attrs[] = {
1701 	&dev_attr_seconds.attr,
1702 	&dev_attr_minutes.attr,
1703 	&dev_attr_hours.attr,
1704 	&dev_attr_wday.attr,
1705 	&dev_attr_mday.attr,
1706 	&dev_attr_month.attr,
1707 	&dev_attr_year.attr,
1708 	&dev_attr_century.attr,
1709 	NULL,
1710 };
1711 
1712 static const struct attribute_group
1713 ds1685_rtc_sysfs_time_grp = {
1714 	.name = "datetime",
1715 	.attrs = ds1685_rtc_sysfs_time_attrs,
1716 };
1717 
1718 static struct attribute*
1719 ds1685_rtc_sysfs_alarm_attrs[] = {
1720 	&dev_attr_alarm_seconds.attr,
1721 	&dev_attr_alarm_minutes.attr,
1722 	&dev_attr_alarm_hours.attr,
1723 	&dev_attr_alarm_mday.attr,
1724 	NULL,
1725 };
1726 
1727 static const struct attribute_group
1728 ds1685_rtc_sysfs_alarm_grp = {
1729 	.name = "alarm",
1730 	.attrs = ds1685_rtc_sysfs_alarm_attrs,
1731 };
1732 #endif /* CONFIG_RTC_DS1685_SYSFS_REGS */
1733 
1734 
1735 /**
1736  * ds1685_rtc_sysfs_register - register sysfs files.
1737  * @dev: pointer to device structure.
1738  */
1739 static int
1740 ds1685_rtc_sysfs_register(struct device *dev)
1741 {
1742 	int ret = 0;
1743 
1744 	sysfs_bin_attr_init(&ds1685_rtc_sysfs_nvram_attr);
1745 	ret = sysfs_create_bin_file(&dev->kobj, &ds1685_rtc_sysfs_nvram_attr);
1746 	if (ret)
1747 		return ret;
1748 
1749 	ret = sysfs_create_group(&dev->kobj, &ds1685_rtc_sysfs_misc_grp);
1750 	if (ret)
1751 		return ret;
1752 
1753 #ifdef CONFIG_RTC_DS1685_SYSFS_REGS
1754 	ret = sysfs_create_group(&dev->kobj, &ds1685_rtc_sysfs_ctrla_grp);
1755 	if (ret)
1756 		return ret;
1757 
1758 	ret = sysfs_create_group(&dev->kobj, &ds1685_rtc_sysfs_ctrlb_grp);
1759 	if (ret)
1760 		return ret;
1761 
1762 	ret = sysfs_create_group(&dev->kobj, &ds1685_rtc_sysfs_ctrlc_grp);
1763 	if (ret)
1764 		return ret;
1765 
1766 	ret = sysfs_create_group(&dev->kobj, &ds1685_rtc_sysfs_ctrld_grp);
1767 	if (ret)
1768 		return ret;
1769 
1770 	ret = sysfs_create_group(&dev->kobj, &ds1685_rtc_sysfs_ctrl4a_grp);
1771 	if (ret)
1772 		return ret;
1773 
1774 	ret = sysfs_create_group(&dev->kobj, &ds1685_rtc_sysfs_ctrl4b_grp);
1775 	if (ret)
1776 		return ret;
1777 
1778 	ret = sysfs_create_group(&dev->kobj, &ds1685_rtc_sysfs_time_grp);
1779 	if (ret)
1780 		return ret;
1781 
1782 	ret = sysfs_create_group(&dev->kobj, &ds1685_rtc_sysfs_alarm_grp);
1783 	if (ret)
1784 		return ret;
1785 #endif
1786 	return 0;
1787 }
1788 
1789 /**
1790  * ds1685_rtc_sysfs_unregister - unregister sysfs files.
1791  * @dev: pointer to device structure.
1792  */
1793 static int
1794 ds1685_rtc_sysfs_unregister(struct device *dev)
1795 {
1796 	sysfs_remove_bin_file(&dev->kobj, &ds1685_rtc_sysfs_nvram_attr);
1797 	sysfs_remove_group(&dev->kobj, &ds1685_rtc_sysfs_misc_grp);
1798 
1799 #ifdef CONFIG_RTC_DS1685_SYSFS_REGS
1800 	sysfs_remove_group(&dev->kobj, &ds1685_rtc_sysfs_ctrla_grp);
1801 	sysfs_remove_group(&dev->kobj, &ds1685_rtc_sysfs_ctrlb_grp);
1802 	sysfs_remove_group(&dev->kobj, &ds1685_rtc_sysfs_ctrlc_grp);
1803 	sysfs_remove_group(&dev->kobj, &ds1685_rtc_sysfs_ctrld_grp);
1804 	sysfs_remove_group(&dev->kobj, &ds1685_rtc_sysfs_ctrl4a_grp);
1805 	sysfs_remove_group(&dev->kobj, &ds1685_rtc_sysfs_ctrl4b_grp);
1806 	sysfs_remove_group(&dev->kobj, &ds1685_rtc_sysfs_time_grp);
1807 	sysfs_remove_group(&dev->kobj, &ds1685_rtc_sysfs_alarm_grp);
1808 #endif
1809 
1810 	return 0;
1811 }
1812 #endif /* CONFIG_SYSFS */
1813 
1814 
1815 
1816 /* ----------------------------------------------------------------------- */
1817 /* Driver Probe/Removal */
1818 
1819 /**
1820  * ds1685_rtc_probe - initializes rtc driver.
1821  * @pdev: pointer to platform_device structure.
1822  */
1823 static int
1824 ds1685_rtc_probe(struct platform_device *pdev)
1825 {
1826 	struct rtc_device *rtc_dev;
1827 	struct resource *res;
1828 	struct ds1685_priv *rtc;
1829 	struct ds1685_rtc_platform_data *pdata;
1830 	u8 ctrla, ctrlb, hours;
1831 	unsigned char am_pm;
1832 	int ret = 0;
1833 
1834 	/* Get the platform data. */
1835 	pdata = (struct ds1685_rtc_platform_data *) pdev->dev.platform_data;
1836 	if (!pdata)
1837 		return -ENODEV;
1838 
1839 	/* Allocate memory for the rtc device. */
1840 	rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
1841 	if (!rtc)
1842 		return -ENOMEM;
1843 
1844 	/*
1845 	 * Allocate/setup any IORESOURCE_MEM resources, if required.  Not all
1846 	 * platforms put the RTC in an easy-access place.  Like the SGI Octane,
1847 	 * which attaches the RTC to a "ByteBus", hooked to a SuperIO chip
1848 	 * that sits behind the IOC3 PCI metadevice.
1849 	 */
1850 	if (pdata->alloc_io_resources) {
1851 		/* Get the platform resources. */
1852 		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1853 		if (!res)
1854 			return -ENXIO;
1855 		rtc->size = resource_size(res);
1856 
1857 		/* Request a memory region. */
1858 		/* XXX: mmio-only for now. */
1859 		if (!devm_request_mem_region(&pdev->dev, res->start, rtc->size,
1860 					     pdev->name))
1861 			return -EBUSY;
1862 
1863 		/*
1864 		 * Set the base address for the rtc, and ioremap its
1865 		 * registers.
1866 		 */
1867 		rtc->baseaddr = res->start;
1868 		rtc->regs = devm_ioremap(&pdev->dev, res->start, rtc->size);
1869 		if (!rtc->regs)
1870 			return -ENOMEM;
1871 	}
1872 	rtc->alloc_io_resources = pdata->alloc_io_resources;
1873 
1874 	/* Get the register step size. */
1875 	if (pdata->regstep > 0)
1876 		rtc->regstep = pdata->regstep;
1877 	else
1878 		rtc->regstep = 1;
1879 
1880 	/* Platform read function, else default if mmio setup */
1881 	if (pdata->plat_read)
1882 		rtc->read = pdata->plat_read;
1883 	else
1884 		if (pdata->alloc_io_resources)
1885 			rtc->read = ds1685_read;
1886 		else
1887 			return -ENXIO;
1888 
1889 	/* Platform write function, else default if mmio setup */
1890 	if (pdata->plat_write)
1891 		rtc->write = pdata->plat_write;
1892 	else
1893 		if (pdata->alloc_io_resources)
1894 			rtc->write = ds1685_write;
1895 		else
1896 			return -ENXIO;
1897 
1898 	/* Platform pre-shutdown function, if defined. */
1899 	if (pdata->plat_prepare_poweroff)
1900 		rtc->prepare_poweroff = pdata->plat_prepare_poweroff;
1901 
1902 	/* Platform wake_alarm function, if defined. */
1903 	if (pdata->plat_wake_alarm)
1904 		rtc->wake_alarm = pdata->plat_wake_alarm;
1905 
1906 	/* Platform post_ram_clear function, if defined. */
1907 	if (pdata->plat_post_ram_clear)
1908 		rtc->post_ram_clear = pdata->plat_post_ram_clear;
1909 
1910 	/* Init the spinlock, workqueue, & set the driver data. */
1911 	spin_lock_init(&rtc->lock);
1912 	INIT_WORK(&rtc->work, ds1685_rtc_work_queue);
1913 	platform_set_drvdata(pdev, rtc);
1914 
1915 	/* Turn the oscillator on if is not already on (DV1 = 1). */
1916 	ctrla = rtc->read(rtc, RTC_CTRL_A);
1917 	if (!(ctrla & RTC_CTRL_A_DV1))
1918 		ctrla |= RTC_CTRL_A_DV1;
1919 
1920 	/* Enable the countdown chain (DV2 = 0) */
1921 	ctrla &= ~(RTC_CTRL_A_DV2);
1922 
1923 	/* Clear RS3-RS0 in Control A. */
1924 	ctrla &= ~(RTC_CTRL_A_RS_MASK);
1925 
1926 	/*
1927 	 * All done with Control A.  Switch to Bank 1 for the remainder of
1928 	 * the RTC setup so we have access to the extended functions.
1929 	 */
1930 	ctrla |= RTC_CTRL_A_DV0;
1931 	rtc->write(rtc, RTC_CTRL_A, ctrla);
1932 
1933 	/* Default to 32768kHz output. */
1934 	rtc->write(rtc, RTC_EXT_CTRL_4B,
1935 		   (rtc->read(rtc, RTC_EXT_CTRL_4B) | RTC_CTRL_4B_E32K));
1936 
1937 	/* Set the SET bit in Control B so we can do some housekeeping. */
1938 	rtc->write(rtc, RTC_CTRL_B,
1939 		   (rtc->read(rtc, RTC_CTRL_B) | RTC_CTRL_B_SET));
1940 
1941 	/* Read Ext Ctrl 4A and check the INCR bit to avoid a lockout. */
1942 	while (rtc->read(rtc, RTC_EXT_CTRL_4A) & RTC_CTRL_4A_INCR)
1943 		cpu_relax();
1944 
1945 	/*
1946 	 * If the platform supports BCD mode, then set DM=0 in Control B.
1947 	 * Otherwise, set DM=1 for BIN mode.
1948 	 */
1949 	ctrlb = rtc->read(rtc, RTC_CTRL_B);
1950 	if (pdata->bcd_mode)
1951 		ctrlb &= ~(RTC_CTRL_B_DM);
1952 	else
1953 		ctrlb |= RTC_CTRL_B_DM;
1954 	rtc->bcd_mode = pdata->bcd_mode;
1955 
1956 	/*
1957 	 * Disable Daylight Savings Time (DSE = 0).
1958 	 * The RTC has hardcoded timezone information that is rendered
1959 	 * obselete.  We'll let the OS deal with DST settings instead.
1960 	 */
1961 	if (ctrlb & RTC_CTRL_B_DSE)
1962 		ctrlb &= ~(RTC_CTRL_B_DSE);
1963 
1964 	/* Force 24-hour mode (2412 = 1). */
1965 	if (!(ctrlb & RTC_CTRL_B_2412)) {
1966 		/* Reinitialize the time hours. */
1967 		hours = rtc->read(rtc, RTC_HRS);
1968 		am_pm = hours & RTC_HRS_AMPM_MASK;
1969 		hours = ds1685_rtc_bcd2bin(rtc, hours, RTC_HRS_12_BCD_MASK,
1970 					   RTC_HRS_12_BIN_MASK);
1971 		hours = ((hours == 12) ? 0 : ((am_pm) ? hours + 12 : hours));
1972 
1973 		/* Enable 24-hour mode. */
1974 		ctrlb |= RTC_CTRL_B_2412;
1975 
1976 		/* Write back to Control B, including DM & DSE bits. */
1977 		rtc->write(rtc, RTC_CTRL_B, ctrlb);
1978 
1979 		/* Write the time hours back. */
1980 		rtc->write(rtc, RTC_HRS,
1981 			   ds1685_rtc_bin2bcd(rtc, hours,
1982 					      RTC_HRS_24_BIN_MASK,
1983 					      RTC_HRS_24_BCD_MASK));
1984 
1985 		/* Reinitialize the alarm hours. */
1986 		hours = rtc->read(rtc, RTC_HRS_ALARM);
1987 		am_pm = hours & RTC_HRS_AMPM_MASK;
1988 		hours = ds1685_rtc_bcd2bin(rtc, hours, RTC_HRS_12_BCD_MASK,
1989 					   RTC_HRS_12_BIN_MASK);
1990 		hours = ((hours == 12) ? 0 : ((am_pm) ? hours + 12 : hours));
1991 
1992 		/* Write the alarm hours back. */
1993 		rtc->write(rtc, RTC_HRS_ALARM,
1994 			   ds1685_rtc_bin2bcd(rtc, hours,
1995 					      RTC_HRS_24_BIN_MASK,
1996 					      RTC_HRS_24_BCD_MASK));
1997 	} else {
1998 		/* 24-hour mode is already set, so write Control B back. */
1999 		rtc->write(rtc, RTC_CTRL_B, ctrlb);
2000 	}
2001 
2002 	/* Unset the SET bit in Control B so the RTC can update. */
2003 	rtc->write(rtc, RTC_CTRL_B,
2004 		   (rtc->read(rtc, RTC_CTRL_B) & ~(RTC_CTRL_B_SET)));
2005 
2006 	/* Check the main battery. */
2007 	if (!(rtc->read(rtc, RTC_CTRL_D) & RTC_CTRL_D_VRT))
2008 		dev_warn(&pdev->dev,
2009 			 "Main battery is exhausted! RTC may be invalid!\n");
2010 
2011 	/* Check the auxillary battery.  It is optional. */
2012 	if (!(rtc->read(rtc, RTC_EXT_CTRL_4A) & RTC_CTRL_4A_VRT2))
2013 		dev_warn(&pdev->dev,
2014 			 "Aux battery is exhausted or not available.\n");
2015 
2016 	/* Read Ctrl B and clear PIE/AIE/UIE. */
2017 	rtc->write(rtc, RTC_CTRL_B,
2018 		   (rtc->read(rtc, RTC_CTRL_B) & ~(RTC_CTRL_B_PAU_MASK)));
2019 
2020 	/* Reading Ctrl C auto-clears PF/AF/UF. */
2021 	rtc->read(rtc, RTC_CTRL_C);
2022 
2023 	/* Read Ctrl 4B and clear RIE/WIE/KSE. */
2024 	rtc->write(rtc, RTC_EXT_CTRL_4B,
2025 		   (rtc->read(rtc, RTC_EXT_CTRL_4B) & ~(RTC_CTRL_4B_RWK_MASK)));
2026 
2027 	/* Clear RF/WF/KF in Ctrl 4A. */
2028 	rtc->write(rtc, RTC_EXT_CTRL_4A,
2029 		   (rtc->read(rtc, RTC_EXT_CTRL_4A) & ~(RTC_CTRL_4A_RWK_MASK)));
2030 
2031 	/*
2032 	 * Re-enable KSE to handle power button events.  We do not enable
2033 	 * WIE or RIE by default.
2034 	 */
2035 	rtc->write(rtc, RTC_EXT_CTRL_4B,
2036 		   (rtc->read(rtc, RTC_EXT_CTRL_4B) | RTC_CTRL_4B_KSE));
2037 
2038 	/*
2039 	 * Fetch the IRQ and setup the interrupt handler.
2040 	 *
2041 	 * Not all platforms have the IRQF pin tied to something.  If not, the
2042 	 * RTC will still set the *IE / *F flags and raise IRQF in ctrlc, but
2043 	 * there won't be an automatic way of notifying the kernel about it,
2044 	 * unless ctrlc is explicitly polled.
2045 	 */
2046 	if (!pdata->no_irq) {
2047 		ret = platform_get_irq(pdev, 0);
2048 		if (ret > 0) {
2049 			rtc->irq_num = ret;
2050 
2051 			/* Request an IRQ. */
2052 			ret = devm_request_irq(&pdev->dev, rtc->irq_num,
2053 					       ds1685_rtc_irq_handler,
2054 					       IRQF_SHARED, pdev->name, pdev);
2055 
2056 			/* Check to see if something came back. */
2057 			if (unlikely(ret)) {
2058 				dev_warn(&pdev->dev,
2059 					 "RTC interrupt not available\n");
2060 				rtc->irq_num = 0;
2061 			}
2062 		} else
2063 			return ret;
2064 	}
2065 	rtc->no_irq = pdata->no_irq;
2066 
2067 	/* Setup complete. */
2068 	ds1685_rtc_switch_to_bank0(rtc);
2069 
2070 	/* Register the device as an RTC. */
2071 	rtc_dev = rtc_device_register(pdev->name, &pdev->dev,
2072 				      &ds1685_rtc_ops, THIS_MODULE);
2073 
2074 	/* Success? */
2075 	if (IS_ERR(rtc_dev))
2076 		return PTR_ERR(rtc_dev);
2077 
2078 	/* Maximum periodic rate is 8192Hz (0.122070ms). */
2079 	rtc_dev->max_user_freq = RTC_MAX_USER_FREQ;
2080 
2081 	/* See if the platform doesn't support UIE. */
2082 	if (pdata->uie_unsupported)
2083 		rtc_dev->uie_unsupported = 1;
2084 	rtc->uie_unsupported = pdata->uie_unsupported;
2085 
2086 	rtc->dev = rtc_dev;
2087 
2088 #ifdef CONFIG_SYSFS
2089 	ret = ds1685_rtc_sysfs_register(&pdev->dev);
2090 	if (ret)
2091 		rtc_device_unregister(rtc->dev);
2092 #endif
2093 
2094 	/* Done! */
2095 	return ret;
2096 }
2097 
2098 /**
2099  * ds1685_rtc_remove - removes rtc driver.
2100  * @pdev: pointer to platform_device structure.
2101  */
2102 static int
2103 ds1685_rtc_remove(struct platform_device *pdev)
2104 {
2105 	struct ds1685_priv *rtc = platform_get_drvdata(pdev);
2106 
2107 #ifdef CONFIG_SYSFS
2108 	ds1685_rtc_sysfs_unregister(&pdev->dev);
2109 #endif
2110 
2111 	rtc_device_unregister(rtc->dev);
2112 
2113 	/* Read Ctrl B and clear PIE/AIE/UIE. */
2114 	rtc->write(rtc, RTC_CTRL_B,
2115 		   (rtc->read(rtc, RTC_CTRL_B) &
2116 		    ~(RTC_CTRL_B_PAU_MASK)));
2117 
2118 	/* Reading Ctrl C auto-clears PF/AF/UF. */
2119 	rtc->read(rtc, RTC_CTRL_C);
2120 
2121 	/* Read Ctrl 4B and clear RIE/WIE/KSE. */
2122 	rtc->write(rtc, RTC_EXT_CTRL_4B,
2123 		   (rtc->read(rtc, RTC_EXT_CTRL_4B) &
2124 		    ~(RTC_CTRL_4B_RWK_MASK)));
2125 
2126 	/* Manually clear RF/WF/KF in Ctrl 4A. */
2127 	rtc->write(rtc, RTC_EXT_CTRL_4A,
2128 		   (rtc->read(rtc, RTC_EXT_CTRL_4A) &
2129 		    ~(RTC_CTRL_4A_RWK_MASK)));
2130 
2131 	cancel_work_sync(&rtc->work);
2132 
2133 	return 0;
2134 }
2135 
2136 /**
2137  * ds1685_rtc_driver - rtc driver properties.
2138  */
2139 static struct platform_driver ds1685_rtc_driver = {
2140 	.driver		= {
2141 		.name	= "rtc-ds1685",
2142 		.owner	= THIS_MODULE,
2143 	},
2144 	.probe		= ds1685_rtc_probe,
2145 	.remove		= ds1685_rtc_remove,
2146 };
2147 
2148 /**
2149  * ds1685_rtc_init - rtc module init.
2150  */
2151 static int __init
2152 ds1685_rtc_init(void)
2153 {
2154 	return platform_driver_register(&ds1685_rtc_driver);
2155 }
2156 
2157 /**
2158  * ds1685_rtc_exit - rtc module exit.
2159  */
2160 static void __exit
2161 ds1685_rtc_exit(void)
2162 {
2163 	platform_driver_unregister(&ds1685_rtc_driver);
2164 }
2165 
2166 module_init(ds1685_rtc_init);
2167 module_exit(ds1685_rtc_exit);
2168 /* ----------------------------------------------------------------------- */
2169 
2170 
2171 /* ----------------------------------------------------------------------- */
2172 /* Poweroff function */
2173 
2174 /**
2175  * ds1685_rtc_poweroff - uses the RTC chip to power the system off.
2176  * @pdev: pointer to platform_device structure.
2177  */
2178 extern void __noreturn
2179 ds1685_rtc_poweroff(struct platform_device *pdev)
2180 {
2181 	u8 ctrla, ctrl4a, ctrl4b;
2182 	struct ds1685_priv *rtc;
2183 
2184 	/* Check for valid RTC data, else, spin forever. */
2185 	if (unlikely(!pdev)) {
2186 		pr_emerg("rtc-ds1685: platform device data not available, spinning forever ...\n");
2187 		unreachable();
2188 	} else {
2189 		/* Get the rtc data. */
2190 		rtc = platform_get_drvdata(pdev);
2191 
2192 		/*
2193 		 * Disable our IRQ.  We're powering down, so we're not
2194 		 * going to worry about cleaning up.  Most of that should
2195 		 * have been taken care of by the shutdown scripts and this
2196 		 * is the final function call.
2197 		 */
2198 		if (!rtc->no_irq)
2199 			disable_irq_nosync(rtc->irq_num);
2200 
2201 		/* Oscillator must be on and the countdown chain enabled. */
2202 		ctrla = rtc->read(rtc, RTC_CTRL_A);
2203 		ctrla |= RTC_CTRL_A_DV1;
2204 		ctrla &= ~(RTC_CTRL_A_DV2);
2205 		rtc->write(rtc, RTC_CTRL_A, ctrla);
2206 
2207 		/*
2208 		 * Read Control 4A and check the status of the auxillary
2209 		 * battery.  This must be present and working (VRT2 = 1)
2210 		 * for wakeup and kickstart functionality to be useful.
2211 		 */
2212 		ds1685_rtc_switch_to_bank1(rtc);
2213 		ctrl4a = rtc->read(rtc, RTC_EXT_CTRL_4A);
2214 		if (ctrl4a & RTC_CTRL_4A_VRT2) {
2215 			/* Clear all of the interrupt flags on Control 4A. */
2216 			ctrl4a &= ~(RTC_CTRL_4A_RWK_MASK);
2217 			rtc->write(rtc, RTC_EXT_CTRL_4A, ctrl4a);
2218 
2219 			/*
2220 			 * The auxillary battery is present and working.
2221 			 * Enable extended functions (ABE=1), enable
2222 			 * wake-up (WIE=1), and enable kickstart (KSE=1)
2223 			 * in Control 4B.
2224 			 */
2225 			ctrl4b = rtc->read(rtc, RTC_EXT_CTRL_4B);
2226 			ctrl4b |= (RTC_CTRL_4B_ABE | RTC_CTRL_4B_WIE |
2227 				   RTC_CTRL_4B_KSE);
2228 			rtc->write(rtc, RTC_EXT_CTRL_4B, ctrl4b);
2229 		}
2230 
2231 		/* Set PAB to 1 in Control 4A to power the system down. */
2232 		dev_warn(&pdev->dev, "Powerdown.\n");
2233 		msleep(20);
2234 		rtc->write(rtc, RTC_EXT_CTRL_4A,
2235 			   (ctrl4a | RTC_CTRL_4A_PAB));
2236 
2237 		/* Spin ... we do not switch back to bank0. */
2238 		unreachable();
2239 	}
2240 }
2241 EXPORT_SYMBOL(ds1685_rtc_poweroff);
2242 /* ----------------------------------------------------------------------- */
2243 
2244 
2245 MODULE_AUTHOR("Joshua Kinard <kumba@gentoo.org>");
2246 MODULE_AUTHOR("Matthias Fuchs <matthias.fuchs@esd-electronics.com>");
2247 MODULE_DESCRIPTION("Dallas/Maxim DS1685/DS1687-series RTC driver");
2248 MODULE_LICENSE("GPL");
2249 MODULE_VERSION(DRV_VERSION);
2250 MODULE_ALIAS("platform:rtc-ds1685");
2251