1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Dallas DS1302 RTC Support 4 * 5 * Copyright (C) 2002 David McCullough 6 * Copyright (C) 2003 - 2007 Paul Mundt 7 */ 8 9 #include <linux/bcd.h> 10 #include <linux/init.h> 11 #include <linux/io.h> 12 #include <linux/kernel.h> 13 #include <linux/module.h> 14 #include <linux/of.h> 15 #include <linux/rtc.h> 16 #include <linux/spi/spi.h> 17 18 #define RTC_CMD_READ 0x81 /* Read command */ 19 #define RTC_CMD_WRITE 0x80 /* Write command */ 20 21 #define RTC_CMD_WRITE_ENABLE 0x00 /* Write enable */ 22 #define RTC_CMD_WRITE_DISABLE 0x80 /* Write disable */ 23 24 #define RTC_ADDR_RAM0 0x20 /* Address of RAM0 */ 25 #define RTC_ADDR_TCR 0x08 /* Address of trickle charge register */ 26 #define RTC_CLCK_BURST 0x1F /* Address of clock burst */ 27 #define RTC_CLCK_LEN 0x08 /* Size of clock burst */ 28 #define RTC_ADDR_CTRL 0x07 /* Address of control register */ 29 #define RTC_ADDR_YEAR 0x06 /* Address of year register */ 30 #define RTC_ADDR_DAY 0x05 /* Address of day of week register */ 31 #define RTC_ADDR_MON 0x04 /* Address of month register */ 32 #define RTC_ADDR_DATE 0x03 /* Address of day of month register */ 33 #define RTC_ADDR_HOUR 0x02 /* Address of hour register */ 34 #define RTC_ADDR_MIN 0x01 /* Address of minute register */ 35 #define RTC_ADDR_SEC 0x00 /* Address of second register */ 36 37 static int ds1302_rtc_set_time(struct device *dev, struct rtc_time *time) 38 { 39 struct spi_device *spi = dev_get_drvdata(dev); 40 u8 buf[1 + RTC_CLCK_LEN]; 41 u8 *bp; 42 int status; 43 44 /* Enable writing */ 45 bp = buf; 46 *bp++ = RTC_ADDR_CTRL << 1 | RTC_CMD_WRITE; 47 *bp++ = RTC_CMD_WRITE_ENABLE; 48 49 status = spi_write_then_read(spi, buf, 2, 50 NULL, 0); 51 if (status) 52 return status; 53 54 /* Write registers starting at the first time/date address. */ 55 bp = buf; 56 *bp++ = RTC_CLCK_BURST << 1 | RTC_CMD_WRITE; 57 58 *bp++ = bin2bcd(time->tm_sec); 59 *bp++ = bin2bcd(time->tm_min); 60 *bp++ = bin2bcd(time->tm_hour); 61 *bp++ = bin2bcd(time->tm_mday); 62 *bp++ = bin2bcd(time->tm_mon + 1); 63 *bp++ = time->tm_wday + 1; 64 *bp++ = bin2bcd(time->tm_year % 100); 65 *bp++ = RTC_CMD_WRITE_DISABLE; 66 67 /* use write-then-read since dma from stack is nonportable */ 68 return spi_write_then_read(spi, buf, sizeof(buf), 69 NULL, 0); 70 } 71 72 static int ds1302_rtc_get_time(struct device *dev, struct rtc_time *time) 73 { 74 struct spi_device *spi = dev_get_drvdata(dev); 75 u8 addr = RTC_CLCK_BURST << 1 | RTC_CMD_READ; 76 u8 buf[RTC_CLCK_LEN - 1]; 77 int status; 78 79 /* Use write-then-read to get all the date/time registers 80 * since dma from stack is nonportable 81 */ 82 status = spi_write_then_read(spi, &addr, sizeof(addr), 83 buf, sizeof(buf)); 84 if (status < 0) 85 return status; 86 87 /* Decode the registers */ 88 time->tm_sec = bcd2bin(buf[RTC_ADDR_SEC]); 89 time->tm_min = bcd2bin(buf[RTC_ADDR_MIN]); 90 time->tm_hour = bcd2bin(buf[RTC_ADDR_HOUR]); 91 time->tm_wday = buf[RTC_ADDR_DAY] - 1; 92 time->tm_mday = bcd2bin(buf[RTC_ADDR_DATE]); 93 time->tm_mon = bcd2bin(buf[RTC_ADDR_MON]) - 1; 94 time->tm_year = bcd2bin(buf[RTC_ADDR_YEAR]) + 100; 95 96 return 0; 97 } 98 99 static const struct rtc_class_ops ds1302_rtc_ops = { 100 .read_time = ds1302_rtc_get_time, 101 .set_time = ds1302_rtc_set_time, 102 }; 103 104 static int ds1302_probe(struct spi_device *spi) 105 { 106 struct rtc_device *rtc; 107 u8 addr; 108 u8 buf[4]; 109 u8 *bp; 110 int status; 111 112 /* Sanity check board setup data. This may be hooked up 113 * in 3wire mode, but we don't care. Note that unless 114 * there's an inverter in place, this needs SPI_CS_HIGH! 115 */ 116 if (spi->bits_per_word && (spi->bits_per_word != 8)) { 117 dev_err(&spi->dev, "bad word length\n"); 118 return -EINVAL; 119 } else if (spi->max_speed_hz > 2000000) { 120 dev_err(&spi->dev, "speed is too high\n"); 121 return -EINVAL; 122 } else if (spi->mode & SPI_CPHA) { 123 dev_err(&spi->dev, "bad mode\n"); 124 return -EINVAL; 125 } 126 127 addr = RTC_ADDR_CTRL << 1 | RTC_CMD_READ; 128 status = spi_write_then_read(spi, &addr, sizeof(addr), buf, 1); 129 if (status < 0) { 130 dev_err(&spi->dev, "control register read error %d\n", 131 status); 132 return status; 133 } 134 135 if ((buf[0] & ~RTC_CMD_WRITE_DISABLE) != 0) { 136 status = spi_write_then_read(spi, &addr, sizeof(addr), buf, 1); 137 if (status < 0) { 138 dev_err(&spi->dev, "control register read error %d\n", 139 status); 140 return status; 141 } 142 143 if ((buf[0] & ~RTC_CMD_WRITE_DISABLE) != 0) { 144 dev_err(&spi->dev, "junk in control register\n"); 145 return -ENODEV; 146 } 147 } 148 if (buf[0] == 0) { 149 bp = buf; 150 *bp++ = RTC_ADDR_CTRL << 1 | RTC_CMD_WRITE; 151 *bp++ = RTC_CMD_WRITE_DISABLE; 152 153 status = spi_write_then_read(spi, buf, 2, NULL, 0); 154 if (status < 0) { 155 dev_err(&spi->dev, "control register write error %d\n", 156 status); 157 return status; 158 } 159 160 addr = RTC_ADDR_CTRL << 1 | RTC_CMD_READ; 161 status = spi_write_then_read(spi, &addr, sizeof(addr), buf, 1); 162 if (status < 0) { 163 dev_err(&spi->dev, 164 "error %d reading control register\n", 165 status); 166 return status; 167 } 168 169 if (buf[0] != RTC_CMD_WRITE_DISABLE) { 170 dev_err(&spi->dev, "failed to detect chip\n"); 171 return -ENODEV; 172 } 173 } 174 175 spi_set_drvdata(spi, spi); 176 177 rtc = devm_rtc_device_register(&spi->dev, "ds1302", 178 &ds1302_rtc_ops, THIS_MODULE); 179 if (IS_ERR(rtc)) { 180 status = PTR_ERR(rtc); 181 dev_err(&spi->dev, "error %d registering rtc\n", status); 182 return status; 183 } 184 185 return 0; 186 } 187 188 static int ds1302_remove(struct spi_device *spi) 189 { 190 spi_set_drvdata(spi, NULL); 191 return 0; 192 } 193 194 #ifdef CONFIG_OF 195 static const struct of_device_id ds1302_dt_ids[] = { 196 { .compatible = "maxim,ds1302", }, 197 { /* sentinel */ } 198 }; 199 MODULE_DEVICE_TABLE(of, ds1302_dt_ids); 200 #endif 201 202 static const struct spi_device_id ds1302_spi_ids[] = { 203 { .name = "ds1302", }, 204 { /* sentinel */ } 205 }; 206 MODULE_DEVICE_TABLE(spi, ds1302_spi_ids); 207 208 static struct spi_driver ds1302_driver = { 209 .driver.name = "rtc-ds1302", 210 .driver.of_match_table = of_match_ptr(ds1302_dt_ids), 211 .probe = ds1302_probe, 212 .remove = ds1302_remove, 213 .id_table = ds1302_spi_ids, 214 }; 215 216 module_spi_driver(ds1302_driver); 217 218 MODULE_DESCRIPTION("Dallas DS1302 RTC driver"); 219 MODULE_AUTHOR("Paul Mundt, David McCullough"); 220 MODULE_LICENSE("GPL v2"); 221