xref: /openbmc/linux/drivers/rtc/rtc-at91sam9.c (revision 82e6fdd6)
1 /*
2  * "RTT as Real Time Clock" driver for AT91SAM9 SoC family
3  *
4  * (C) 2007 Michel Benoit
5  *
6  * Based on rtc-at91rm9200.c by Rick Bronson
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License
10  * as published by the Free Software Foundation; either version
11  * 2 of the License, or (at your option) any later version.
12  */
13 
14 #include <linux/clk.h>
15 #include <linux/interrupt.h>
16 #include <linux/ioctl.h>
17 #include <linux/io.h>
18 #include <linux/kernel.h>
19 #include <linux/mfd/syscon.h>
20 #include <linux/module.h>
21 #include <linux/of.h>
22 #include <linux/platform_device.h>
23 #include <linux/regmap.h>
24 #include <linux/rtc.h>
25 #include <linux/slab.h>
26 #include <linux/suspend.h>
27 #include <linux/time.h>
28 
29 /*
30  * This driver uses two configurable hardware resources that live in the
31  * AT91SAM9 backup power domain (intended to be powered at all times)
32  * to implement the Real Time Clock interfaces
33  *
34  *  - A "Real-time Timer" (RTT) counts up in seconds from a base time.
35  *    We can't assign the counter value (CRTV) ... but we can reset it.
36  *
37  *  - One of the "General Purpose Backup Registers" (GPBRs) holds the
38  *    base time, normally an offset from the beginning of the POSIX
39  *    epoch (1970-Jan-1 00:00:00 UTC).  Some systems also include the
40  *    local timezone's offset.
41  *
42  * The RTC's value is the RTT counter plus that offset.  The RTC's alarm
43  * is likewise a base (ALMV) plus that offset.
44  *
45  * Not all RTTs will be used as RTCs; some systems have multiple RTTs to
46  * choose from, or a "real" RTC module.  All systems have multiple GPBR
47  * registers available, likewise usable for more than "RTC" support.
48  */
49 
50 #define AT91_RTT_MR		0x00			/* Real-time Mode Register */
51 #define AT91_RTT_RTPRES		(0xffff << 0)		/* Real-time Timer Prescaler Value */
52 #define AT91_RTT_ALMIEN		(1 << 16)		/* Alarm Interrupt Enable */
53 #define AT91_RTT_RTTINCIEN	(1 << 17)		/* Real Time Timer Increment Interrupt Enable */
54 #define AT91_RTT_RTTRST		(1 << 18)		/* Real Time Timer Restart */
55 
56 #define AT91_RTT_AR		0x04			/* Real-time Alarm Register */
57 #define AT91_RTT_ALMV		(0xffffffff)		/* Alarm Value */
58 
59 #define AT91_RTT_VR		0x08			/* Real-time Value Register */
60 #define AT91_RTT_CRTV		(0xffffffff)		/* Current Real-time Value */
61 
62 #define AT91_RTT_SR		0x0c			/* Real-time Status Register */
63 #define AT91_RTT_ALMS		(1 << 0)		/* Real-time Alarm Status */
64 #define AT91_RTT_RTTINC		(1 << 1)		/* Real-time Timer Increment */
65 
66 /*
67  * We store ALARM_DISABLED in ALMV to record that no alarm is set.
68  * It's also the reset value for that field.
69  */
70 #define ALARM_DISABLED	((u32)~0)
71 
72 
73 struct sam9_rtc {
74 	void __iomem		*rtt;
75 	struct rtc_device	*rtcdev;
76 	u32			imr;
77 	struct regmap		*gpbr;
78 	unsigned int		gpbr_offset;
79 	int 			irq;
80 	struct clk		*sclk;
81 	bool			suspended;
82 	unsigned long		events;
83 	spinlock_t		lock;
84 };
85 
86 #define rtt_readl(rtc, field) \
87 	readl((rtc)->rtt + AT91_RTT_ ## field)
88 #define rtt_writel(rtc, field, val) \
89 	writel((val), (rtc)->rtt + AT91_RTT_ ## field)
90 
91 static inline unsigned int gpbr_readl(struct sam9_rtc *rtc)
92 {
93 	unsigned int val;
94 
95 	regmap_read(rtc->gpbr, rtc->gpbr_offset, &val);
96 
97 	return val;
98 }
99 
100 static inline void gpbr_writel(struct sam9_rtc *rtc, unsigned int val)
101 {
102 	regmap_write(rtc->gpbr, rtc->gpbr_offset, val);
103 }
104 
105 /*
106  * Read current time and date in RTC
107  */
108 static int at91_rtc_readtime(struct device *dev, struct rtc_time *tm)
109 {
110 	struct sam9_rtc *rtc = dev_get_drvdata(dev);
111 	u32 secs, secs2;
112 	u32 offset;
113 
114 	/* read current time offset */
115 	offset = gpbr_readl(rtc);
116 	if (offset == 0)
117 		return -EILSEQ;
118 
119 	/* reread the counter to help sync the two clock domains */
120 	secs = rtt_readl(rtc, VR);
121 	secs2 = rtt_readl(rtc, VR);
122 	if (secs != secs2)
123 		secs = rtt_readl(rtc, VR);
124 
125 	rtc_time_to_tm(offset + secs, tm);
126 
127 	dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "readtime",
128 		1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
129 		tm->tm_hour, tm->tm_min, tm->tm_sec);
130 
131 	return 0;
132 }
133 
134 /*
135  * Set current time and date in RTC
136  */
137 static int at91_rtc_settime(struct device *dev, struct rtc_time *tm)
138 {
139 	struct sam9_rtc *rtc = dev_get_drvdata(dev);
140 	int err;
141 	u32 offset, alarm, mr;
142 	unsigned long secs;
143 
144 	dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "settime",
145 		1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
146 		tm->tm_hour, tm->tm_min, tm->tm_sec);
147 
148 	err = rtc_tm_to_time(tm, &secs);
149 	if (err != 0)
150 		return err;
151 
152 	mr = rtt_readl(rtc, MR);
153 
154 	/* disable interrupts */
155 	rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
156 
157 	/* read current time offset */
158 	offset = gpbr_readl(rtc);
159 
160 	/* store the new base time in a battery backup register */
161 	secs += 1;
162 	gpbr_writel(rtc, secs);
163 
164 	/* adjust the alarm time for the new base */
165 	alarm = rtt_readl(rtc, AR);
166 	if (alarm != ALARM_DISABLED) {
167 		if (offset > secs) {
168 			/* time jumped backwards, increase time until alarm */
169 			alarm += (offset - secs);
170 		} else if ((alarm + offset) > secs) {
171 			/* time jumped forwards, decrease time until alarm */
172 			alarm -= (secs - offset);
173 		} else {
174 			/* time jumped past the alarm, disable alarm */
175 			alarm = ALARM_DISABLED;
176 			mr &= ~AT91_RTT_ALMIEN;
177 		}
178 		rtt_writel(rtc, AR, alarm);
179 	}
180 
181 	/* reset the timer, and re-enable interrupts */
182 	rtt_writel(rtc, MR, mr | AT91_RTT_RTTRST);
183 
184 	return 0;
185 }
186 
187 static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
188 {
189 	struct sam9_rtc *rtc = dev_get_drvdata(dev);
190 	struct rtc_time *tm = &alrm->time;
191 	u32 alarm = rtt_readl(rtc, AR);
192 	u32 offset;
193 
194 	offset = gpbr_readl(rtc);
195 	if (offset == 0)
196 		return -EILSEQ;
197 
198 	memset(alrm, 0, sizeof(*alrm));
199 	if (alarm != ALARM_DISABLED && offset != 0) {
200 		rtc_time_to_tm(offset + alarm, tm);
201 
202 		dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "readalarm",
203 			1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
204 			tm->tm_hour, tm->tm_min, tm->tm_sec);
205 
206 		if (rtt_readl(rtc, MR) & AT91_RTT_ALMIEN)
207 			alrm->enabled = 1;
208 	}
209 
210 	return 0;
211 }
212 
213 static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
214 {
215 	struct sam9_rtc *rtc = dev_get_drvdata(dev);
216 	struct rtc_time *tm = &alrm->time;
217 	unsigned long secs;
218 	u32 offset;
219 	u32 mr;
220 	int err;
221 
222 	err = rtc_tm_to_time(tm, &secs);
223 	if (err != 0)
224 		return err;
225 
226 	offset = gpbr_readl(rtc);
227 	if (offset == 0) {
228 		/* time is not set */
229 		return -EILSEQ;
230 	}
231 	mr = rtt_readl(rtc, MR);
232 	rtt_writel(rtc, MR, mr & ~AT91_RTT_ALMIEN);
233 
234 	/* alarm in the past? finish and leave disabled */
235 	if (secs <= offset) {
236 		rtt_writel(rtc, AR, ALARM_DISABLED);
237 		return 0;
238 	}
239 
240 	/* else set alarm and maybe enable it */
241 	rtt_writel(rtc, AR, secs - offset);
242 	if (alrm->enabled)
243 		rtt_writel(rtc, MR, mr | AT91_RTT_ALMIEN);
244 
245 	dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "setalarm",
246 		tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_hour,
247 		tm->tm_min, tm->tm_sec);
248 
249 	return 0;
250 }
251 
252 static int at91_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
253 {
254 	struct sam9_rtc *rtc = dev_get_drvdata(dev);
255 	u32 mr = rtt_readl(rtc, MR);
256 
257 	dev_dbg(dev, "alarm_irq_enable: enabled=%08x, mr %08x\n", enabled, mr);
258 	if (enabled)
259 		rtt_writel(rtc, MR, mr | AT91_RTT_ALMIEN);
260 	else
261 		rtt_writel(rtc, MR, mr & ~AT91_RTT_ALMIEN);
262 	return 0;
263 }
264 
265 /*
266  * Provide additional RTC information in /proc/driver/rtc
267  */
268 static int at91_rtc_proc(struct device *dev, struct seq_file *seq)
269 {
270 	struct sam9_rtc *rtc = dev_get_drvdata(dev);
271 	u32 mr = rtt_readl(rtc, MR);
272 
273 	seq_printf(seq, "update_IRQ\t: %s\n",
274 			(mr & AT91_RTT_RTTINCIEN) ? "yes" : "no");
275 	return 0;
276 }
277 
278 static irqreturn_t at91_rtc_cache_events(struct sam9_rtc *rtc)
279 {
280 	u32 sr, mr;
281 
282 	/* Shared interrupt may be for another device.  Note: reading
283 	 * SR clears it, so we must only read it in this irq handler!
284 	 */
285 	mr = rtt_readl(rtc, MR) & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
286 	sr = rtt_readl(rtc, SR) & (mr >> 16);
287 	if (!sr)
288 		return IRQ_NONE;
289 
290 	/* alarm status */
291 	if (sr & AT91_RTT_ALMS)
292 		rtc->events |= (RTC_AF | RTC_IRQF);
293 
294 	/* timer update/increment */
295 	if (sr & AT91_RTT_RTTINC)
296 		rtc->events |= (RTC_UF | RTC_IRQF);
297 
298 	return IRQ_HANDLED;
299 }
300 
301 static void at91_rtc_flush_events(struct sam9_rtc *rtc)
302 {
303 	if (!rtc->events)
304 		return;
305 
306 	rtc_update_irq(rtc->rtcdev, 1, rtc->events);
307 	rtc->events = 0;
308 
309 	pr_debug("%s: num=%ld, events=0x%02lx\n", __func__,
310 		rtc->events >> 8, rtc->events & 0x000000FF);
311 }
312 
313 /*
314  * IRQ handler for the RTC
315  */
316 static irqreturn_t at91_rtc_interrupt(int irq, void *_rtc)
317 {
318 	struct sam9_rtc *rtc = _rtc;
319 	int ret;
320 
321 	spin_lock(&rtc->lock);
322 
323 	ret = at91_rtc_cache_events(rtc);
324 
325 	/* We're called in suspended state */
326 	if (rtc->suspended) {
327 		/* Mask irqs coming from this peripheral */
328 		rtt_writel(rtc, MR,
329 			   rtt_readl(rtc, MR) &
330 			   ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
331 		/* Trigger a system wakeup */
332 		pm_system_wakeup();
333 	} else {
334 		at91_rtc_flush_events(rtc);
335 	}
336 
337 	spin_unlock(&rtc->lock);
338 
339 	return ret;
340 }
341 
342 static const struct rtc_class_ops at91_rtc_ops = {
343 	.read_time	= at91_rtc_readtime,
344 	.set_time	= at91_rtc_settime,
345 	.read_alarm	= at91_rtc_readalarm,
346 	.set_alarm	= at91_rtc_setalarm,
347 	.proc		= at91_rtc_proc,
348 	.alarm_irq_enable = at91_rtc_alarm_irq_enable,
349 };
350 
351 static const struct regmap_config gpbr_regmap_config = {
352 	.reg_bits = 32,
353 	.val_bits = 32,
354 	.reg_stride = 4,
355 };
356 
357 /*
358  * Initialize and install RTC driver
359  */
360 static int at91_rtc_probe(struct platform_device *pdev)
361 {
362 	struct resource	*r;
363 	struct sam9_rtc	*rtc;
364 	int		ret, irq;
365 	u32		mr;
366 	unsigned int	sclk_rate;
367 
368 	irq = platform_get_irq(pdev, 0);
369 	if (irq < 0) {
370 		dev_err(&pdev->dev, "failed to get interrupt resource\n");
371 		return irq;
372 	}
373 
374 	rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
375 	if (!rtc)
376 		return -ENOMEM;
377 
378 	spin_lock_init(&rtc->lock);
379 	rtc->irq = irq;
380 
381 	/* platform setup code should have handled this; sigh */
382 	if (!device_can_wakeup(&pdev->dev))
383 		device_init_wakeup(&pdev->dev, 1);
384 
385 	platform_set_drvdata(pdev, rtc);
386 
387 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
388 	rtc->rtt = devm_ioremap_resource(&pdev->dev, r);
389 	if (IS_ERR(rtc->rtt))
390 		return PTR_ERR(rtc->rtt);
391 
392 	if (!pdev->dev.of_node) {
393 		/*
394 		 * TODO: Remove this code chunk when removing non DT board
395 		 * support. Remember to remove the gpbr_regmap_config
396 		 * variable too.
397 		 */
398 		void __iomem *gpbr;
399 
400 		r = platform_get_resource(pdev, IORESOURCE_MEM, 1);
401 		gpbr = devm_ioremap_resource(&pdev->dev, r);
402 		if (IS_ERR(gpbr))
403 			return PTR_ERR(gpbr);
404 
405 		rtc->gpbr = regmap_init_mmio(NULL, gpbr,
406 					     &gpbr_regmap_config);
407 	} else {
408 		struct of_phandle_args args;
409 
410 		ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node,
411 						"atmel,rtt-rtc-time-reg", 1, 0,
412 						&args);
413 		if (ret)
414 			return ret;
415 
416 		rtc->gpbr = syscon_node_to_regmap(args.np);
417 		rtc->gpbr_offset = args.args[0];
418 	}
419 
420 	if (IS_ERR(rtc->gpbr)) {
421 		dev_err(&pdev->dev, "failed to retrieve gpbr regmap, aborting.\n");
422 		return -ENOMEM;
423 	}
424 
425 	rtc->sclk = devm_clk_get(&pdev->dev, NULL);
426 	if (IS_ERR(rtc->sclk))
427 		return PTR_ERR(rtc->sclk);
428 
429 	ret = clk_prepare_enable(rtc->sclk);
430 	if (ret) {
431 		dev_err(&pdev->dev, "Could not enable slow clock\n");
432 		return ret;
433 	}
434 
435 	sclk_rate = clk_get_rate(rtc->sclk);
436 	if (!sclk_rate || sclk_rate > AT91_RTT_RTPRES) {
437 		dev_err(&pdev->dev, "Invalid slow clock rate\n");
438 		ret = -EINVAL;
439 		goto err_clk;
440 	}
441 
442 	mr = rtt_readl(rtc, MR);
443 
444 	/* unless RTT is counting at 1 Hz, re-initialize it */
445 	if ((mr & AT91_RTT_RTPRES) != sclk_rate) {
446 		mr = AT91_RTT_RTTRST | (sclk_rate & AT91_RTT_RTPRES);
447 		gpbr_writel(rtc, 0);
448 	}
449 
450 	/* disable all interrupts (same as on shutdown path) */
451 	mr &= ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
452 	rtt_writel(rtc, MR, mr);
453 
454 	rtc->rtcdev = devm_rtc_device_register(&pdev->dev, pdev->name,
455 					&at91_rtc_ops, THIS_MODULE);
456 	if (IS_ERR(rtc->rtcdev)) {
457 		ret = PTR_ERR(rtc->rtcdev);
458 		goto err_clk;
459 	}
460 
461 	/* register irq handler after we know what name we'll use */
462 	ret = devm_request_irq(&pdev->dev, rtc->irq, at91_rtc_interrupt,
463 			       IRQF_SHARED | IRQF_COND_SUSPEND,
464 			       dev_name(&rtc->rtcdev->dev), rtc);
465 	if (ret) {
466 		dev_dbg(&pdev->dev, "can't share IRQ %d?\n", rtc->irq);
467 		goto err_clk;
468 	}
469 
470 	/* NOTE:  sam9260 rev A silicon has a ROM bug which resets the
471 	 * RTT on at least some reboots.  If you have that chip, you must
472 	 * initialize the time from some external source like a GPS, wall
473 	 * clock, discrete RTC, etc
474 	 */
475 
476 	if (gpbr_readl(rtc) == 0)
477 		dev_warn(&pdev->dev, "%s: SET TIME!\n",
478 				dev_name(&rtc->rtcdev->dev));
479 
480 	return 0;
481 
482 err_clk:
483 	clk_disable_unprepare(rtc->sclk);
484 
485 	return ret;
486 }
487 
488 /*
489  * Disable and remove the RTC driver
490  */
491 static int at91_rtc_remove(struct platform_device *pdev)
492 {
493 	struct sam9_rtc	*rtc = platform_get_drvdata(pdev);
494 	u32		mr = rtt_readl(rtc, MR);
495 
496 	/* disable all interrupts */
497 	rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
498 
499 	clk_disable_unprepare(rtc->sclk);
500 
501 	return 0;
502 }
503 
504 static void at91_rtc_shutdown(struct platform_device *pdev)
505 {
506 	struct sam9_rtc	*rtc = platform_get_drvdata(pdev);
507 	u32		mr = rtt_readl(rtc, MR);
508 
509 	rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
510 	rtt_writel(rtc, MR, mr & ~rtc->imr);
511 }
512 
513 #ifdef CONFIG_PM_SLEEP
514 
515 /* AT91SAM9 RTC Power management control */
516 
517 static int at91_rtc_suspend(struct device *dev)
518 {
519 	struct sam9_rtc	*rtc = dev_get_drvdata(dev);
520 	u32		mr = rtt_readl(rtc, MR);
521 
522 	/*
523 	 * This IRQ is shared with DBGU and other hardware which isn't
524 	 * necessarily a wakeup event source.
525 	 */
526 	rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
527 	if (rtc->imr) {
528 		if (device_may_wakeup(dev) && (mr & AT91_RTT_ALMIEN)) {
529 			unsigned long flags;
530 
531 			enable_irq_wake(rtc->irq);
532 			spin_lock_irqsave(&rtc->lock, flags);
533 			rtc->suspended = true;
534 			spin_unlock_irqrestore(&rtc->lock, flags);
535 			/* don't let RTTINC cause wakeups */
536 			if (mr & AT91_RTT_RTTINCIEN)
537 				rtt_writel(rtc, MR, mr & ~AT91_RTT_RTTINCIEN);
538 		} else
539 			rtt_writel(rtc, MR, mr & ~rtc->imr);
540 	}
541 
542 	return 0;
543 }
544 
545 static int at91_rtc_resume(struct device *dev)
546 {
547 	struct sam9_rtc	*rtc = dev_get_drvdata(dev);
548 	u32		mr;
549 
550 	if (rtc->imr) {
551 		unsigned long flags;
552 
553 		if (device_may_wakeup(dev))
554 			disable_irq_wake(rtc->irq);
555 		mr = rtt_readl(rtc, MR);
556 		rtt_writel(rtc, MR, mr | rtc->imr);
557 
558 		spin_lock_irqsave(&rtc->lock, flags);
559 		rtc->suspended = false;
560 		at91_rtc_cache_events(rtc);
561 		at91_rtc_flush_events(rtc);
562 		spin_unlock_irqrestore(&rtc->lock, flags);
563 	}
564 
565 	return 0;
566 }
567 #endif
568 
569 static SIMPLE_DEV_PM_OPS(at91_rtc_pm_ops, at91_rtc_suspend, at91_rtc_resume);
570 
571 #ifdef CONFIG_OF
572 static const struct of_device_id at91_rtc_dt_ids[] = {
573 	{ .compatible = "atmel,at91sam9260-rtt" },
574 	{ /* sentinel */ }
575 };
576 MODULE_DEVICE_TABLE(of, at91_rtc_dt_ids);
577 #endif
578 
579 static struct platform_driver at91_rtc_driver = {
580 	.probe		= at91_rtc_probe,
581 	.remove		= at91_rtc_remove,
582 	.shutdown	= at91_rtc_shutdown,
583 	.driver		= {
584 		.name	= "rtc-at91sam9",
585 		.pm	= &at91_rtc_pm_ops,
586 		.of_match_table = of_match_ptr(at91_rtc_dt_ids),
587 	},
588 };
589 
590 module_platform_driver(at91_rtc_driver);
591 
592 MODULE_AUTHOR("Michel Benoit");
593 MODULE_DESCRIPTION("RTC driver for Atmel AT91SAM9x");
594 MODULE_LICENSE("GPL");
595