xref: /openbmc/linux/drivers/rtc/rtc-at91sam9.c (revision 565d76cb)
1 /*
2  * "RTT as Real Time Clock" driver for AT91SAM9 SoC family
3  *
4  * (C) 2007 Michel Benoit
5  *
6  * Based on rtc-at91rm9200.c by Rick Bronson
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License
10  * as published by the Free Software Foundation; either version
11  * 2 of the License, or (at your option) any later version.
12  */
13 
14 #include <linux/module.h>
15 #include <linux/kernel.h>
16 #include <linux/platform_device.h>
17 #include <linux/time.h>
18 #include <linux/rtc.h>
19 #include <linux/interrupt.h>
20 #include <linux/ioctl.h>
21 #include <linux/slab.h>
22 
23 #include <mach/board.h>
24 #include <mach/at91_rtt.h>
25 #include <mach/cpu.h>
26 
27 
28 /*
29  * This driver uses two configurable hardware resources that live in the
30  * AT91SAM9 backup power domain (intended to be powered at all times)
31  * to implement the Real Time Clock interfaces
32  *
33  *  - A "Real-time Timer" (RTT) counts up in seconds from a base time.
34  *    We can't assign the counter value (CRTV) ... but we can reset it.
35  *
36  *  - One of the "General Purpose Backup Registers" (GPBRs) holds the
37  *    base time, normally an offset from the beginning of the POSIX
38  *    epoch (1970-Jan-1 00:00:00 UTC).  Some systems also include the
39  *    local timezone's offset.
40  *
41  * The RTC's value is the RTT counter plus that offset.  The RTC's alarm
42  * is likewise a base (ALMV) plus that offset.
43  *
44  * Not all RTTs will be used as RTCs; some systems have multiple RTTs to
45  * choose from, or a "real" RTC module.  All systems have multiple GPBR
46  * registers available, likewise usable for more than "RTC" support.
47  */
48 
49 /*
50  * We store ALARM_DISABLED in ALMV to record that no alarm is set.
51  * It's also the reset value for that field.
52  */
53 #define ALARM_DISABLED	((u32)~0)
54 
55 
56 struct sam9_rtc {
57 	void __iomem		*rtt;
58 	struct rtc_device	*rtcdev;
59 	u32			imr;
60 };
61 
62 #define rtt_readl(rtc, field) \
63 	__raw_readl((rtc)->rtt + AT91_RTT_ ## field)
64 #define rtt_writel(rtc, field, val) \
65 	__raw_writel((val), (rtc)->rtt + AT91_RTT_ ## field)
66 
67 #define gpbr_readl(rtc) \
68 	at91_sys_read(AT91_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR)
69 #define gpbr_writel(rtc, val) \
70 	at91_sys_write(AT91_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR, (val))
71 
72 /*
73  * Read current time and date in RTC
74  */
75 static int at91_rtc_readtime(struct device *dev, struct rtc_time *tm)
76 {
77 	struct sam9_rtc *rtc = dev_get_drvdata(dev);
78 	u32 secs, secs2;
79 	u32 offset;
80 
81 	/* read current time offset */
82 	offset = gpbr_readl(rtc);
83 	if (offset == 0)
84 		return -EILSEQ;
85 
86 	/* reread the counter to help sync the two clock domains */
87 	secs = rtt_readl(rtc, VR);
88 	secs2 = rtt_readl(rtc, VR);
89 	if (secs != secs2)
90 		secs = rtt_readl(rtc, VR);
91 
92 	rtc_time_to_tm(offset + secs, tm);
93 
94 	dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "readtime",
95 		1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
96 		tm->tm_hour, tm->tm_min, tm->tm_sec);
97 
98 	return 0;
99 }
100 
101 /*
102  * Set current time and date in RTC
103  */
104 static int at91_rtc_settime(struct device *dev, struct rtc_time *tm)
105 {
106 	struct sam9_rtc *rtc = dev_get_drvdata(dev);
107 	int err;
108 	u32 offset, alarm, mr;
109 	unsigned long secs;
110 
111 	dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "settime",
112 		1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
113 		tm->tm_hour, tm->tm_min, tm->tm_sec);
114 
115 	err = rtc_tm_to_time(tm, &secs);
116 	if (err != 0)
117 		return err;
118 
119 	mr = rtt_readl(rtc, MR);
120 
121 	/* disable interrupts */
122 	rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
123 
124 	/* read current time offset */
125 	offset = gpbr_readl(rtc);
126 
127 	/* store the new base time in a battery backup register */
128 	secs += 1;
129 	gpbr_writel(rtc, secs);
130 
131 	/* adjust the alarm time for the new base */
132 	alarm = rtt_readl(rtc, AR);
133 	if (alarm != ALARM_DISABLED) {
134 		if (offset > secs) {
135 			/* time jumped backwards, increase time until alarm */
136 			alarm += (offset - secs);
137 		} else if ((alarm + offset) > secs) {
138 			/* time jumped forwards, decrease time until alarm */
139 			alarm -= (secs - offset);
140 		} else {
141 			/* time jumped past the alarm, disable alarm */
142 			alarm = ALARM_DISABLED;
143 			mr &= ~AT91_RTT_ALMIEN;
144 		}
145 		rtt_writel(rtc, AR, alarm);
146 	}
147 
148 	/* reset the timer, and re-enable interrupts */
149 	rtt_writel(rtc, MR, mr | AT91_RTT_RTTRST);
150 
151 	return 0;
152 }
153 
154 static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
155 {
156 	struct sam9_rtc *rtc = dev_get_drvdata(dev);
157 	struct rtc_time *tm = &alrm->time;
158 	u32 alarm = rtt_readl(rtc, AR);
159 	u32 offset;
160 
161 	offset = gpbr_readl(rtc);
162 	if (offset == 0)
163 		return -EILSEQ;
164 
165 	memset(alrm, 0, sizeof(*alrm));
166 	if (alarm != ALARM_DISABLED && offset != 0) {
167 		rtc_time_to_tm(offset + alarm, tm);
168 
169 		dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "readalarm",
170 			1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
171 			tm->tm_hour, tm->tm_min, tm->tm_sec);
172 
173 		if (rtt_readl(rtc, MR) & AT91_RTT_ALMIEN)
174 			alrm->enabled = 1;
175 	}
176 
177 	return 0;
178 }
179 
180 static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
181 {
182 	struct sam9_rtc *rtc = dev_get_drvdata(dev);
183 	struct rtc_time *tm = &alrm->time;
184 	unsigned long secs;
185 	u32 offset;
186 	u32 mr;
187 	int err;
188 
189 	err = rtc_tm_to_time(tm, &secs);
190 	if (err != 0)
191 		return err;
192 
193 	offset = gpbr_readl(rtc);
194 	if (offset == 0) {
195 		/* time is not set */
196 		return -EILSEQ;
197 	}
198 	mr = rtt_readl(rtc, MR);
199 	rtt_writel(rtc, MR, mr & ~AT91_RTT_ALMIEN);
200 
201 	/* alarm in the past? finish and leave disabled */
202 	if (secs <= offset) {
203 		rtt_writel(rtc, AR, ALARM_DISABLED);
204 		return 0;
205 	}
206 
207 	/* else set alarm and maybe enable it */
208 	rtt_writel(rtc, AR, secs - offset);
209 	if (alrm->enabled)
210 		rtt_writel(rtc, MR, mr | AT91_RTT_ALMIEN);
211 
212 	dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "setalarm",
213 		tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_hour,
214 		tm->tm_min, tm->tm_sec);
215 
216 	return 0;
217 }
218 
219 static int at91_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
220 {
221 	struct sam9_rtc *rtc = dev_get_drvdata(dev);
222 	u32 mr = rtt_readl(rtc, MR);
223 
224 	dev_dbg(dev, "alarm_irq_enable: enabled=%08x, mr %08x\n", enabled, mr);
225 	if (enabled)
226 		rtt_writel(rtc, MR, mr | AT91_RTT_ALMIEN);
227 	else
228 		rtt_writel(rtc, MR, mr & ~AT91_RTT_ALMIEN);
229 	return 0;
230 }
231 
232 /*
233  * Provide additional RTC information in /proc/driver/rtc
234  */
235 static int at91_rtc_proc(struct device *dev, struct seq_file *seq)
236 {
237 	struct sam9_rtc *rtc = dev_get_drvdata(dev);
238 	u32 mr = mr = rtt_readl(rtc, MR);
239 
240 	seq_printf(seq, "update_IRQ\t: %s\n",
241 			(mr & AT91_RTT_RTTINCIEN) ? "yes" : "no");
242 	return 0;
243 }
244 
245 /*
246  * IRQ handler for the RTC
247  */
248 static irqreturn_t at91_rtc_interrupt(int irq, void *_rtc)
249 {
250 	struct sam9_rtc *rtc = _rtc;
251 	u32 sr, mr;
252 	unsigned long events = 0;
253 
254 	/* Shared interrupt may be for another device.  Note: reading
255 	 * SR clears it, so we must only read it in this irq handler!
256 	 */
257 	mr = rtt_readl(rtc, MR) & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
258 	sr = rtt_readl(rtc, SR) & (mr >> 16);
259 	if (!sr)
260 		return IRQ_NONE;
261 
262 	/* alarm status */
263 	if (sr & AT91_RTT_ALMS)
264 		events |= (RTC_AF | RTC_IRQF);
265 
266 	/* timer update/increment */
267 	if (sr & AT91_RTT_RTTINC)
268 		events |= (RTC_UF | RTC_IRQF);
269 
270 	rtc_update_irq(rtc->rtcdev, 1, events);
271 
272 	pr_debug("%s: num=%ld, events=0x%02lx\n", __func__,
273 		events >> 8, events & 0x000000FF);
274 
275 	return IRQ_HANDLED;
276 }
277 
278 static const struct rtc_class_ops at91_rtc_ops = {
279 	.read_time	= at91_rtc_readtime,
280 	.set_time	= at91_rtc_settime,
281 	.read_alarm	= at91_rtc_readalarm,
282 	.set_alarm	= at91_rtc_setalarm,
283 	.proc		= at91_rtc_proc,
284 	.alarm_irq_enable = at91_rtc_alarm_irq_enable,
285 };
286 
287 /*
288  * Initialize and install RTC driver
289  */
290 static int __init at91_rtc_probe(struct platform_device *pdev)
291 {
292 	struct resource	*r;
293 	struct sam9_rtc	*rtc;
294 	int		ret;
295 	u32		mr;
296 
297 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
298 	if (!r)
299 		return -ENODEV;
300 
301 	rtc = kzalloc(sizeof *rtc, GFP_KERNEL);
302 	if (!rtc)
303 		return -ENOMEM;
304 
305 	/* platform setup code should have handled this; sigh */
306 	if (!device_can_wakeup(&pdev->dev))
307 		device_init_wakeup(&pdev->dev, 1);
308 
309 	platform_set_drvdata(pdev, rtc);
310 	rtc->rtt = (void __force __iomem *) (AT91_VA_BASE_SYS - AT91_BASE_SYS);
311 	rtc->rtt += r->start;
312 
313 	mr = rtt_readl(rtc, MR);
314 
315 	/* unless RTT is counting at 1 Hz, re-initialize it */
316 	if ((mr & AT91_RTT_RTPRES) != AT91_SLOW_CLOCK) {
317 		mr = AT91_RTT_RTTRST | (AT91_SLOW_CLOCK & AT91_RTT_RTPRES);
318 		gpbr_writel(rtc, 0);
319 	}
320 
321 	/* disable all interrupts (same as on shutdown path) */
322 	mr &= ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
323 	rtt_writel(rtc, MR, mr);
324 
325 	rtc->rtcdev = rtc_device_register(pdev->name, &pdev->dev,
326 				&at91_rtc_ops, THIS_MODULE);
327 	if (IS_ERR(rtc->rtcdev)) {
328 		ret = PTR_ERR(rtc->rtcdev);
329 		goto fail;
330 	}
331 
332 	/* register irq handler after we know what name we'll use */
333 	ret = request_irq(AT91_ID_SYS, at91_rtc_interrupt,
334 				IRQF_DISABLED | IRQF_SHARED,
335 				dev_name(&rtc->rtcdev->dev), rtc);
336 	if (ret) {
337 		dev_dbg(&pdev->dev, "can't share IRQ %d?\n", AT91_ID_SYS);
338 		rtc_device_unregister(rtc->rtcdev);
339 		goto fail;
340 	}
341 
342 	/* NOTE:  sam9260 rev A silicon has a ROM bug which resets the
343 	 * RTT on at least some reboots.  If you have that chip, you must
344 	 * initialize the time from some external source like a GPS, wall
345 	 * clock, discrete RTC, etc
346 	 */
347 
348 	if (gpbr_readl(rtc) == 0)
349 		dev_warn(&pdev->dev, "%s: SET TIME!\n",
350 				dev_name(&rtc->rtcdev->dev));
351 
352 	return 0;
353 
354 fail:
355 	platform_set_drvdata(pdev, NULL);
356 	kfree(rtc);
357 	return ret;
358 }
359 
360 /*
361  * Disable and remove the RTC driver
362  */
363 static int __exit at91_rtc_remove(struct platform_device *pdev)
364 {
365 	struct sam9_rtc	*rtc = platform_get_drvdata(pdev);
366 	u32		mr = rtt_readl(rtc, MR);
367 
368 	/* disable all interrupts */
369 	rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
370 	free_irq(AT91_ID_SYS, rtc);
371 
372 	rtc_device_unregister(rtc->rtcdev);
373 
374 	platform_set_drvdata(pdev, NULL);
375 	kfree(rtc);
376 	return 0;
377 }
378 
379 static void at91_rtc_shutdown(struct platform_device *pdev)
380 {
381 	struct sam9_rtc	*rtc = platform_get_drvdata(pdev);
382 	u32		mr = rtt_readl(rtc, MR);
383 
384 	rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
385 	rtt_writel(rtc, MR, mr & ~rtc->imr);
386 }
387 
388 #ifdef CONFIG_PM
389 
390 /* AT91SAM9 RTC Power management control */
391 
392 static int at91_rtc_suspend(struct platform_device *pdev,
393 					pm_message_t state)
394 {
395 	struct sam9_rtc	*rtc = platform_get_drvdata(pdev);
396 	u32		mr = rtt_readl(rtc, MR);
397 
398 	/*
399 	 * This IRQ is shared with DBGU and other hardware which isn't
400 	 * necessarily a wakeup event source.
401 	 */
402 	rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
403 	if (rtc->imr) {
404 		if (device_may_wakeup(&pdev->dev) && (mr & AT91_RTT_ALMIEN)) {
405 			enable_irq_wake(AT91_ID_SYS);
406 			/* don't let RTTINC cause wakeups */
407 			if (mr & AT91_RTT_RTTINCIEN)
408 				rtt_writel(rtc, MR, mr & ~AT91_RTT_RTTINCIEN);
409 		} else
410 			rtt_writel(rtc, MR, mr & ~rtc->imr);
411 	}
412 
413 	return 0;
414 }
415 
416 static int at91_rtc_resume(struct platform_device *pdev)
417 {
418 	struct sam9_rtc	*rtc = platform_get_drvdata(pdev);
419 	u32		mr;
420 
421 	if (rtc->imr) {
422 		if (device_may_wakeup(&pdev->dev))
423 			disable_irq_wake(AT91_ID_SYS);
424 		mr = rtt_readl(rtc, MR);
425 		rtt_writel(rtc, MR, mr | rtc->imr);
426 	}
427 
428 	return 0;
429 }
430 #else
431 #define at91_rtc_suspend	NULL
432 #define at91_rtc_resume		NULL
433 #endif
434 
435 static struct platform_driver at91_rtc_driver = {
436 	.driver.name	= "rtc-at91sam9",
437 	.driver.owner	= THIS_MODULE,
438 	.remove		= __exit_p(at91_rtc_remove),
439 	.shutdown	= at91_rtc_shutdown,
440 	.suspend	= at91_rtc_suspend,
441 	.resume		= at91_rtc_resume,
442 };
443 
444 /* Chips can have more than one RTT module, and they can be used for more
445  * than just RTCs.  So we can't just register as "the" RTT driver.
446  *
447  * A normal approach in such cases is to create a library to allocate and
448  * free the modules.  Here we just use bus_find_device() as like such a
449  * library, binding directly ... no runtime "library" footprint is needed.
450  */
451 static int __init at91_rtc_match(struct device *dev, void *v)
452 {
453 	struct platform_device *pdev = to_platform_device(dev);
454 	int ret;
455 
456 	/* continue searching if this isn't the RTT we need */
457 	if (strcmp("at91_rtt", pdev->name) != 0
458 			|| pdev->id != CONFIG_RTC_DRV_AT91SAM9_RTT)
459 		goto fail;
460 
461 	/* else we found it ... but fail unless we can bind to the RTC driver */
462 	if (dev->driver) {
463 		dev_dbg(dev, "busy, can't use as RTC!\n");
464 		goto fail;
465 	}
466 	dev->driver = &at91_rtc_driver.driver;
467 	if (device_attach(dev) == 0) {
468 		dev_dbg(dev, "can't attach RTC!\n");
469 		goto fail;
470 	}
471 	ret = at91_rtc_probe(pdev);
472 	if (ret == 0)
473 		return true;
474 
475 	dev_dbg(dev, "RTC probe err %d!\n", ret);
476 fail:
477 	return false;
478 }
479 
480 static int __init at91_rtc_init(void)
481 {
482 	int status;
483 	struct device *rtc;
484 
485 	status = platform_driver_register(&at91_rtc_driver);
486 	if (status)
487 		return status;
488 	rtc = bus_find_device(&platform_bus_type, NULL,
489 			NULL, at91_rtc_match);
490 	if (!rtc)
491 		platform_driver_unregister(&at91_rtc_driver);
492 	return rtc ? 0 : -ENODEV;
493 }
494 module_init(at91_rtc_init);
495 
496 static void __exit at91_rtc_exit(void)
497 {
498 	platform_driver_unregister(&at91_rtc_driver);
499 }
500 module_exit(at91_rtc_exit);
501 
502 
503 MODULE_AUTHOR("Michel Benoit");
504 MODULE_DESCRIPTION("RTC driver for Atmel AT91SAM9x");
505 MODULE_LICENSE("GPL");
506