1 /* 2 * rtc-ab-b5ze-s3 - Driver for Abracon AB-RTCMC-32.768Khz-B5ZE-S3 3 * I2C RTC / Alarm chip 4 * 5 * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org> 6 * 7 * Detailed datasheet of the chip is available here: 8 * 9 * http://www.abracon.com/realtimeclock/AB-RTCMC-32.768kHz-B5ZE-S3-Application-Manual.pdf 10 * 11 * This work is based on ISL12057 driver (drivers/rtc/rtc-isl12057.c). 12 * 13 * This program is free software; you can redistribute it and/or modify 14 * it under the terms of the GNU General Public License as published by 15 * the Free Software Foundation; either version 2 of the License, or 16 * (at your option) any later version. 17 * 18 * This program is distributed in the hope that it will be useful, 19 * but WITHOUT ANY WARRANTY; without even the implied warranty of 20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 21 * GNU General Public License for more details. 22 */ 23 24 #include <linux/module.h> 25 #include <linux/mutex.h> 26 #include <linux/rtc.h> 27 #include <linux/i2c.h> 28 #include <linux/bcd.h> 29 #include <linux/of.h> 30 #include <linux/regmap.h> 31 #include <linux/interrupt.h> 32 33 #define DRV_NAME "rtc-ab-b5ze-s3" 34 35 /* Control section */ 36 #define ABB5ZES3_REG_CTRL1 0x00 /* Control 1 register */ 37 #define ABB5ZES3_REG_CTRL1_CIE BIT(0) /* Pulse interrupt enable */ 38 #define ABB5ZES3_REG_CTRL1_AIE BIT(1) /* Alarm interrupt enable */ 39 #define ABB5ZES3_REG_CTRL1_SIE BIT(2) /* Second interrupt enable */ 40 #define ABB5ZES3_REG_CTRL1_PM BIT(3) /* 24h/12h mode */ 41 #define ABB5ZES3_REG_CTRL1_SR BIT(4) /* Software reset */ 42 #define ABB5ZES3_REG_CTRL1_STOP BIT(5) /* RTC circuit enable */ 43 #define ABB5ZES3_REG_CTRL1_CAP BIT(7) 44 45 #define ABB5ZES3_REG_CTRL2 0x01 /* Control 2 register */ 46 #define ABB5ZES3_REG_CTRL2_CTBIE BIT(0) /* Countdown timer B int. enable */ 47 #define ABB5ZES3_REG_CTRL2_CTAIE BIT(1) /* Countdown timer A int. enable */ 48 #define ABB5ZES3_REG_CTRL2_WTAIE BIT(2) /* Watchdog timer A int. enable */ 49 #define ABB5ZES3_REG_CTRL2_AF BIT(3) /* Alarm interrupt status */ 50 #define ABB5ZES3_REG_CTRL2_SF BIT(4) /* Second interrupt status */ 51 #define ABB5ZES3_REG_CTRL2_CTBF BIT(5) /* Countdown timer B int. status */ 52 #define ABB5ZES3_REG_CTRL2_CTAF BIT(6) /* Countdown timer A int. status */ 53 #define ABB5ZES3_REG_CTRL2_WTAF BIT(7) /* Watchdog timer A int. status */ 54 55 #define ABB5ZES3_REG_CTRL3 0x02 /* Control 3 register */ 56 #define ABB5ZES3_REG_CTRL3_PM2 BIT(7) /* Power Management bit 2 */ 57 #define ABB5ZES3_REG_CTRL3_PM1 BIT(6) /* Power Management bit 1 */ 58 #define ABB5ZES3_REG_CTRL3_PM0 BIT(5) /* Power Management bit 0 */ 59 #define ABB5ZES3_REG_CTRL3_BSF BIT(3) /* Battery switchover int. status */ 60 #define ABB5ZES3_REG_CTRL3_BLF BIT(2) /* Battery low int. status */ 61 #define ABB5ZES3_REG_CTRL3_BSIE BIT(1) /* Battery switchover int. enable */ 62 #define ABB5ZES3_REG_CTRL3_BLIE BIT(0) /* Battery low int. enable */ 63 64 #define ABB5ZES3_CTRL_SEC_LEN 3 65 66 /* RTC section */ 67 #define ABB5ZES3_REG_RTC_SC 0x03 /* RTC Seconds register */ 68 #define ABB5ZES3_REG_RTC_SC_OSC BIT(7) /* Clock integrity status */ 69 #define ABB5ZES3_REG_RTC_MN 0x04 /* RTC Minutes register */ 70 #define ABB5ZES3_REG_RTC_HR 0x05 /* RTC Hours register */ 71 #define ABB5ZES3_REG_RTC_HR_PM BIT(5) /* RTC Hours PM bit */ 72 #define ABB5ZES3_REG_RTC_DT 0x06 /* RTC Date register */ 73 #define ABB5ZES3_REG_RTC_DW 0x07 /* RTC Day of the week register */ 74 #define ABB5ZES3_REG_RTC_MO 0x08 /* RTC Month register */ 75 #define ABB5ZES3_REG_RTC_YR 0x09 /* RTC Year register */ 76 77 #define ABB5ZES3_RTC_SEC_LEN 7 78 79 /* Alarm section (enable bits are all active low) */ 80 #define ABB5ZES3_REG_ALRM_MN 0x0A /* Alarm - minute register */ 81 #define ABB5ZES3_REG_ALRM_MN_AE BIT(7) /* Minute enable */ 82 #define ABB5ZES3_REG_ALRM_HR 0x0B /* Alarm - hours register */ 83 #define ABB5ZES3_REG_ALRM_HR_AE BIT(7) /* Hour enable */ 84 #define ABB5ZES3_REG_ALRM_DT 0x0C /* Alarm - date register */ 85 #define ABB5ZES3_REG_ALRM_DT_AE BIT(7) /* Date (day of the month) enable */ 86 #define ABB5ZES3_REG_ALRM_DW 0x0D /* Alarm - day of the week reg. */ 87 #define ABB5ZES3_REG_ALRM_DW_AE BIT(7) /* Day of the week enable */ 88 89 #define ABB5ZES3_ALRM_SEC_LEN 4 90 91 /* Frequency offset section */ 92 #define ABB5ZES3_REG_FREQ_OF 0x0E /* Frequency offset register */ 93 #define ABB5ZES3_REG_FREQ_OF_MODE 0x0E /* Offset mode: 2 hours / minute */ 94 95 /* CLOCKOUT section */ 96 #define ABB5ZES3_REG_TIM_CLK 0x0F /* Timer & Clockout register */ 97 #define ABB5ZES3_REG_TIM_CLK_TAM BIT(7) /* Permanent/pulsed timer A/int. 2 */ 98 #define ABB5ZES3_REG_TIM_CLK_TBM BIT(6) /* Permanent/pulsed timer B */ 99 #define ABB5ZES3_REG_TIM_CLK_COF2 BIT(5) /* Clkout Freq bit 2 */ 100 #define ABB5ZES3_REG_TIM_CLK_COF1 BIT(4) /* Clkout Freq bit 1 */ 101 #define ABB5ZES3_REG_TIM_CLK_COF0 BIT(3) /* Clkout Freq bit 0 */ 102 #define ABB5ZES3_REG_TIM_CLK_TAC1 BIT(2) /* Timer A: - 01 : countdown */ 103 #define ABB5ZES3_REG_TIM_CLK_TAC0 BIT(1) /* - 10 : timer */ 104 #define ABB5ZES3_REG_TIM_CLK_TBC BIT(0) /* Timer B enable */ 105 106 /* Timer A Section */ 107 #define ABB5ZES3_REG_TIMA_CLK 0x10 /* Timer A clock register */ 108 #define ABB5ZES3_REG_TIMA_CLK_TAQ2 BIT(2) /* Freq bit 2 */ 109 #define ABB5ZES3_REG_TIMA_CLK_TAQ1 BIT(1) /* Freq bit 1 */ 110 #define ABB5ZES3_REG_TIMA_CLK_TAQ0 BIT(0) /* Freq bit 0 */ 111 #define ABB5ZES3_REG_TIMA 0x11 /* Timer A register */ 112 113 #define ABB5ZES3_TIMA_SEC_LEN 2 114 115 /* Timer B Section */ 116 #define ABB5ZES3_REG_TIMB_CLK 0x12 /* Timer B clock register */ 117 #define ABB5ZES3_REG_TIMB_CLK_TBW2 BIT(6) 118 #define ABB5ZES3_REG_TIMB_CLK_TBW1 BIT(5) 119 #define ABB5ZES3_REG_TIMB_CLK_TBW0 BIT(4) 120 #define ABB5ZES3_REG_TIMB_CLK_TAQ2 BIT(2) 121 #define ABB5ZES3_REG_TIMB_CLK_TAQ1 BIT(1) 122 #define ABB5ZES3_REG_TIMB_CLK_TAQ0 BIT(0) 123 #define ABB5ZES3_REG_TIMB 0x13 /* Timer B register */ 124 #define ABB5ZES3_TIMB_SEC_LEN 2 125 126 #define ABB5ZES3_MEM_MAP_LEN 0x14 127 128 struct abb5zes3_rtc_data { 129 struct rtc_device *rtc; 130 struct regmap *regmap; 131 struct mutex lock; 132 133 int irq; 134 135 bool battery_low; 136 bool timer_alarm; /* current alarm is via timer A */ 137 }; 138 139 /* 140 * Try and match register bits w/ fixed null values to see whether we 141 * are dealing with an ABB5ZES3. Note: this function is called early 142 * during init and hence does need mutex protection. 143 */ 144 static int abb5zes3_i2c_validate_chip(struct regmap *regmap) 145 { 146 u8 regs[ABB5ZES3_MEM_MAP_LEN]; 147 static const u8 mask[ABB5ZES3_MEM_MAP_LEN] = { 0x00, 0x00, 0x10, 0x00, 148 0x80, 0xc0, 0xc0, 0xf8, 149 0xe0, 0x00, 0x00, 0x40, 150 0x40, 0x78, 0x00, 0x00, 151 0xf8, 0x00, 0x88, 0x00 }; 152 int ret, i; 153 154 ret = regmap_bulk_read(regmap, 0, regs, ABB5ZES3_MEM_MAP_LEN); 155 if (ret) 156 return ret; 157 158 for (i = 0; i < ABB5ZES3_MEM_MAP_LEN; ++i) { 159 if (regs[i] & mask[i]) /* check if bits are cleared */ 160 return -ENODEV; 161 } 162 163 return 0; 164 } 165 166 /* Clear alarm status bit. */ 167 static int _abb5zes3_rtc_clear_alarm(struct device *dev) 168 { 169 struct abb5zes3_rtc_data *data = dev_get_drvdata(dev); 170 int ret; 171 172 ret = regmap_update_bits(data->regmap, ABB5ZES3_REG_CTRL2, 173 ABB5ZES3_REG_CTRL2_AF, 0); 174 if (ret) 175 dev_err(dev, "%s: clearing alarm failed (%d)\n", __func__, ret); 176 177 return ret; 178 } 179 180 /* Enable or disable alarm (i.e. alarm interrupt generation) */ 181 static int _abb5zes3_rtc_update_alarm(struct device *dev, bool enable) 182 { 183 struct abb5zes3_rtc_data *data = dev_get_drvdata(dev); 184 int ret; 185 186 ret = regmap_update_bits(data->regmap, ABB5ZES3_REG_CTRL1, 187 ABB5ZES3_REG_CTRL1_AIE, 188 enable ? ABB5ZES3_REG_CTRL1_AIE : 0); 189 if (ret) 190 dev_err(dev, "%s: writing alarm INT failed (%d)\n", 191 __func__, ret); 192 193 return ret; 194 } 195 196 /* Enable or disable timer (watchdog timer A interrupt generation) */ 197 static int _abb5zes3_rtc_update_timer(struct device *dev, bool enable) 198 { 199 struct abb5zes3_rtc_data *data = dev_get_drvdata(dev); 200 int ret; 201 202 ret = regmap_update_bits(data->regmap, ABB5ZES3_REG_CTRL2, 203 ABB5ZES3_REG_CTRL2_WTAIE, 204 enable ? ABB5ZES3_REG_CTRL2_WTAIE : 0); 205 if (ret) 206 dev_err(dev, "%s: writing timer INT failed (%d)\n", 207 __func__, ret); 208 209 return ret; 210 } 211 212 /* 213 * Note: we only read, so regmap inner lock protection is sufficient, i.e. 214 * we do not need driver's main lock protection. 215 */ 216 static int _abb5zes3_rtc_read_time(struct device *dev, struct rtc_time *tm) 217 { 218 struct abb5zes3_rtc_data *data = dev_get_drvdata(dev); 219 u8 regs[ABB5ZES3_REG_RTC_SC + ABB5ZES3_RTC_SEC_LEN]; 220 int ret; 221 222 /* 223 * As we need to read CTRL1 register anyway to access 24/12h 224 * mode bit, we do a single bulk read of both control and RTC 225 * sections (they are consecutive). This also ease indexing 226 * of register values after bulk read. 227 */ 228 ret = regmap_bulk_read(data->regmap, ABB5ZES3_REG_CTRL1, regs, 229 sizeof(regs)); 230 if (ret) { 231 dev_err(dev, "%s: reading RTC time failed (%d)\n", 232 __func__, ret); 233 goto err; 234 } 235 236 /* If clock integrity is not guaranteed, do not return a time value */ 237 if (regs[ABB5ZES3_REG_RTC_SC] & ABB5ZES3_REG_RTC_SC_OSC) { 238 ret = -ENODATA; 239 goto err; 240 } 241 242 tm->tm_sec = bcd2bin(regs[ABB5ZES3_REG_RTC_SC] & 0x7F); 243 tm->tm_min = bcd2bin(regs[ABB5ZES3_REG_RTC_MN]); 244 245 if (regs[ABB5ZES3_REG_CTRL1] & ABB5ZES3_REG_CTRL1_PM) { /* 12hr mode */ 246 tm->tm_hour = bcd2bin(regs[ABB5ZES3_REG_RTC_HR] & 0x1f); 247 if (regs[ABB5ZES3_REG_RTC_HR] & ABB5ZES3_REG_RTC_HR_PM) /* PM */ 248 tm->tm_hour += 12; 249 } else { /* 24hr mode */ 250 tm->tm_hour = bcd2bin(regs[ABB5ZES3_REG_RTC_HR]); 251 } 252 253 tm->tm_mday = bcd2bin(regs[ABB5ZES3_REG_RTC_DT]); 254 tm->tm_wday = bcd2bin(regs[ABB5ZES3_REG_RTC_DW]); 255 tm->tm_mon = bcd2bin(regs[ABB5ZES3_REG_RTC_MO]) - 1; /* starts at 1 */ 256 tm->tm_year = bcd2bin(regs[ABB5ZES3_REG_RTC_YR]) + 100; 257 258 ret = rtc_valid_tm(tm); 259 260 err: 261 return ret; 262 } 263 264 static int abb5zes3_rtc_set_time(struct device *dev, struct rtc_time *tm) 265 { 266 struct abb5zes3_rtc_data *data = dev_get_drvdata(dev); 267 u8 regs[ABB5ZES3_REG_RTC_SC + ABB5ZES3_RTC_SEC_LEN]; 268 int ret; 269 270 /* 271 * Year register is 8-bit wide and bcd-coded, i.e records values 272 * between 0 and 99. tm_year is an offset from 1900 and we are 273 * interested in the 2000-2099 range, so any value less than 100 274 * is invalid. 275 */ 276 if (tm->tm_year < 100) 277 return -EINVAL; 278 279 regs[ABB5ZES3_REG_RTC_SC] = bin2bcd(tm->tm_sec); /* MSB=0 clears OSC */ 280 regs[ABB5ZES3_REG_RTC_MN] = bin2bcd(tm->tm_min); 281 regs[ABB5ZES3_REG_RTC_HR] = bin2bcd(tm->tm_hour); /* 24-hour format */ 282 regs[ABB5ZES3_REG_RTC_DT] = bin2bcd(tm->tm_mday); 283 regs[ABB5ZES3_REG_RTC_DW] = bin2bcd(tm->tm_wday); 284 regs[ABB5ZES3_REG_RTC_MO] = bin2bcd(tm->tm_mon + 1); 285 regs[ABB5ZES3_REG_RTC_YR] = bin2bcd(tm->tm_year - 100); 286 287 mutex_lock(&data->lock); 288 ret = regmap_bulk_write(data->regmap, ABB5ZES3_REG_RTC_SC, 289 regs + ABB5ZES3_REG_RTC_SC, 290 ABB5ZES3_RTC_SEC_LEN); 291 mutex_unlock(&data->lock); 292 293 294 return ret; 295 } 296 297 /* 298 * Set provided TAQ and Timer A registers (TIMA_CLK and TIMA) based on 299 * given number of seconds. 300 */ 301 static inline void sec_to_timer_a(u8 secs, u8 *taq, u8 *timer_a) 302 { 303 *taq = ABB5ZES3_REG_TIMA_CLK_TAQ1; /* 1Hz */ 304 *timer_a = secs; 305 } 306 307 /* 308 * Return current number of seconds in Timer A. As we only use 309 * timer A with a 1Hz freq, this is what we expect to have. 310 */ 311 static inline int sec_from_timer_a(u8 *secs, u8 taq, u8 timer_a) 312 { 313 if (taq != ABB5ZES3_REG_TIMA_CLK_TAQ1) /* 1Hz */ 314 return -EINVAL; 315 316 *secs = timer_a; 317 318 return 0; 319 } 320 321 /* 322 * Read alarm currently configured via a watchdog timer using timer A. This 323 * is done by reading current RTC time and adding remaining timer time. 324 */ 325 static int _abb5zes3_rtc_read_timer(struct device *dev, 326 struct rtc_wkalrm *alarm) 327 { 328 struct abb5zes3_rtc_data *data = dev_get_drvdata(dev); 329 struct rtc_time rtc_tm, *alarm_tm = &alarm->time; 330 u8 regs[ABB5ZES3_TIMA_SEC_LEN + 1]; 331 unsigned long rtc_secs; 332 unsigned int reg; 333 u8 timer_secs; 334 int ret; 335 336 /* 337 * Instead of doing two separate calls, because they are consecutive, 338 * we grab both clockout register and Timer A section. The latter is 339 * used to decide if timer A is enabled (as a watchdog timer). 340 */ 341 ret = regmap_bulk_read(data->regmap, ABB5ZES3_REG_TIM_CLK, regs, 342 ABB5ZES3_TIMA_SEC_LEN + 1); 343 if (ret) { 344 dev_err(dev, "%s: reading Timer A section failed (%d)\n", 345 __func__, ret); 346 goto err; 347 } 348 349 /* get current time ... */ 350 ret = _abb5zes3_rtc_read_time(dev, &rtc_tm); 351 if (ret) 352 goto err; 353 354 /* ... convert to seconds ... */ 355 ret = rtc_tm_to_time(&rtc_tm, &rtc_secs); 356 if (ret) 357 goto err; 358 359 /* ... add remaining timer A time ... */ 360 ret = sec_from_timer_a(&timer_secs, regs[1], regs[2]); 361 if (ret) 362 goto err; 363 364 /* ... and convert back. */ 365 rtc_time_to_tm(rtc_secs + timer_secs, alarm_tm); 366 367 ret = regmap_read(data->regmap, ABB5ZES3_REG_CTRL2, ®); 368 if (ret) { 369 dev_err(dev, "%s: reading ctrl reg failed (%d)\n", 370 __func__, ret); 371 goto err; 372 } 373 374 alarm->enabled = !!(reg & ABB5ZES3_REG_CTRL2_WTAIE); 375 376 err: 377 return ret; 378 } 379 380 /* Read alarm currently configured via a RTC alarm registers. */ 381 static int _abb5zes3_rtc_read_alarm(struct device *dev, 382 struct rtc_wkalrm *alarm) 383 { 384 struct abb5zes3_rtc_data *data = dev_get_drvdata(dev); 385 struct rtc_time rtc_tm, *alarm_tm = &alarm->time; 386 unsigned long rtc_secs, alarm_secs; 387 u8 regs[ABB5ZES3_ALRM_SEC_LEN]; 388 unsigned int reg; 389 int ret; 390 391 ret = regmap_bulk_read(data->regmap, ABB5ZES3_REG_ALRM_MN, regs, 392 ABB5ZES3_ALRM_SEC_LEN); 393 if (ret) { 394 dev_err(dev, "%s: reading alarm section failed (%d)\n", 395 __func__, ret); 396 goto err; 397 } 398 399 alarm_tm->tm_sec = 0; 400 alarm_tm->tm_min = bcd2bin(regs[0] & 0x7f); 401 alarm_tm->tm_hour = bcd2bin(regs[1] & 0x3f); 402 alarm_tm->tm_mday = bcd2bin(regs[2] & 0x3f); 403 alarm_tm->tm_wday = -1; 404 405 /* 406 * The alarm section does not store year/month. We use the ones in rtc 407 * section as a basis and increment month and then year if needed to get 408 * alarm after current time. 409 */ 410 ret = _abb5zes3_rtc_read_time(dev, &rtc_tm); 411 if (ret) 412 goto err; 413 414 alarm_tm->tm_year = rtc_tm.tm_year; 415 alarm_tm->tm_mon = rtc_tm.tm_mon; 416 417 ret = rtc_tm_to_time(&rtc_tm, &rtc_secs); 418 if (ret) 419 goto err; 420 421 ret = rtc_tm_to_time(alarm_tm, &alarm_secs); 422 if (ret) 423 goto err; 424 425 if (alarm_secs < rtc_secs) { 426 if (alarm_tm->tm_mon == 11) { 427 alarm_tm->tm_mon = 0; 428 alarm_tm->tm_year += 1; 429 } else { 430 alarm_tm->tm_mon += 1; 431 } 432 } 433 434 ret = regmap_read(data->regmap, ABB5ZES3_REG_CTRL1, ®); 435 if (ret) { 436 dev_err(dev, "%s: reading ctrl reg failed (%d)\n", 437 __func__, ret); 438 goto err; 439 } 440 441 alarm->enabled = !!(reg & ABB5ZES3_REG_CTRL1_AIE); 442 443 err: 444 return ret; 445 } 446 447 /* 448 * As the Alarm mechanism supported by the chip is only accurate to the 449 * minute, we use the watchdog timer mechanism provided by timer A 450 * (up to 256 seconds w/ a second accuracy) for low alarm values (below 451 * 4 minutes). Otherwise, we use the common alarm mechanism provided 452 * by the chip. In order for that to work, we keep track of currently 453 * configured timer type via 'timer_alarm' flag in our private data 454 * structure. 455 */ 456 static int abb5zes3_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm) 457 { 458 struct abb5zes3_rtc_data *data = dev_get_drvdata(dev); 459 int ret; 460 461 mutex_lock(&data->lock); 462 if (data->timer_alarm) 463 ret = _abb5zes3_rtc_read_timer(dev, alarm); 464 else 465 ret = _abb5zes3_rtc_read_alarm(dev, alarm); 466 mutex_unlock(&data->lock); 467 468 return ret; 469 } 470 471 /* 472 * Set alarm using chip alarm mechanism. It is only accurate to the 473 * minute (not the second). The function expects alarm interrupt to 474 * be disabled. 475 */ 476 static int _abb5zes3_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm) 477 { 478 struct abb5zes3_rtc_data *data = dev_get_drvdata(dev); 479 struct rtc_time *alarm_tm = &alarm->time; 480 unsigned long rtc_secs, alarm_secs; 481 u8 regs[ABB5ZES3_ALRM_SEC_LEN]; 482 struct rtc_time rtc_tm; 483 int ret, enable = 1; 484 485 ret = _abb5zes3_rtc_read_time(dev, &rtc_tm); 486 if (ret) 487 goto err; 488 489 ret = rtc_tm_to_time(&rtc_tm, &rtc_secs); 490 if (ret) 491 goto err; 492 493 ret = rtc_tm_to_time(alarm_tm, &alarm_secs); 494 if (ret) 495 goto err; 496 497 /* If alarm time is before current time, disable the alarm */ 498 if (!alarm->enabled || alarm_secs <= rtc_secs) { 499 enable = 0; 500 } else { 501 /* 502 * Chip only support alarms up to one month in the future. Let's 503 * return an error if we get something after that limit. 504 * Comparison is done by incrementing rtc_tm month field by one 505 * and checking alarm value is still below. 506 */ 507 if (rtc_tm.tm_mon == 11) { /* handle year wrapping */ 508 rtc_tm.tm_mon = 0; 509 rtc_tm.tm_year += 1; 510 } else { 511 rtc_tm.tm_mon += 1; 512 } 513 514 ret = rtc_tm_to_time(&rtc_tm, &rtc_secs); 515 if (ret) 516 goto err; 517 518 if (alarm_secs > rtc_secs) { 519 dev_err(dev, "%s: alarm maximum is one month in the " 520 "future (%d)\n", __func__, ret); 521 ret = -EINVAL; 522 goto err; 523 } 524 } 525 526 /* 527 * Program all alarm registers but DW one. For each register, setting 528 * MSB to 0 enables associated alarm. 529 */ 530 regs[0] = bin2bcd(alarm_tm->tm_min) & 0x7f; 531 regs[1] = bin2bcd(alarm_tm->tm_hour) & 0x3f; 532 regs[2] = bin2bcd(alarm_tm->tm_mday) & 0x3f; 533 regs[3] = ABB5ZES3_REG_ALRM_DW_AE; /* do not match day of the week */ 534 535 ret = regmap_bulk_write(data->regmap, ABB5ZES3_REG_ALRM_MN, regs, 536 ABB5ZES3_ALRM_SEC_LEN); 537 if (ret < 0) { 538 dev_err(dev, "%s: writing ALARM section failed (%d)\n", 539 __func__, ret); 540 goto err; 541 } 542 543 /* Record currently configured alarm is not a timer */ 544 data->timer_alarm = 0; 545 546 /* Enable or disable alarm interrupt generation */ 547 ret = _abb5zes3_rtc_update_alarm(dev, enable); 548 549 err: 550 return ret; 551 } 552 553 /* 554 * Set alarm using timer watchdog (via timer A) mechanism. The function expects 555 * timer A interrupt to be disabled. 556 */ 557 static int _abb5zes3_rtc_set_timer(struct device *dev, struct rtc_wkalrm *alarm, 558 u8 secs) 559 { 560 struct abb5zes3_rtc_data *data = dev_get_drvdata(dev); 561 u8 regs[ABB5ZES3_TIMA_SEC_LEN]; 562 u8 mask = ABB5ZES3_REG_TIM_CLK_TAC0 | ABB5ZES3_REG_TIM_CLK_TAC1; 563 int ret = 0; 564 565 /* Program given number of seconds to Timer A registers */ 566 sec_to_timer_a(secs, ®s[0], ®s[1]); 567 ret = regmap_bulk_write(data->regmap, ABB5ZES3_REG_TIMA_CLK, regs, 568 ABB5ZES3_TIMA_SEC_LEN); 569 if (ret < 0) { 570 dev_err(dev, "%s: writing timer section failed\n", __func__); 571 goto err; 572 } 573 574 /* Configure Timer A as a watchdog timer */ 575 ret = regmap_update_bits(data->regmap, ABB5ZES3_REG_TIM_CLK, 576 mask, ABB5ZES3_REG_TIM_CLK_TAC1); 577 if (ret) 578 dev_err(dev, "%s: failed to update timer\n", __func__); 579 580 /* Record currently configured alarm is a timer */ 581 data->timer_alarm = 1; 582 583 /* Enable or disable timer interrupt generation */ 584 ret = _abb5zes3_rtc_update_timer(dev, alarm->enabled); 585 586 err: 587 return ret; 588 } 589 590 /* 591 * The chip has an alarm which is only accurate to the minute. In order to 592 * handle alarms below that limit, we use the watchdog timer function of 593 * timer A. More precisely, the timer method is used for alarms below 240 594 * seconds. 595 */ 596 static int abb5zes3_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm) 597 { 598 struct abb5zes3_rtc_data *data = dev_get_drvdata(dev); 599 struct rtc_time *alarm_tm = &alarm->time; 600 unsigned long rtc_secs, alarm_secs; 601 struct rtc_time rtc_tm; 602 int ret; 603 604 mutex_lock(&data->lock); 605 ret = _abb5zes3_rtc_read_time(dev, &rtc_tm); 606 if (ret) 607 goto err; 608 609 ret = rtc_tm_to_time(&rtc_tm, &rtc_secs); 610 if (ret) 611 goto err; 612 613 ret = rtc_tm_to_time(alarm_tm, &alarm_secs); 614 if (ret) 615 goto err; 616 617 /* Let's first disable both the alarm and the timer interrupts */ 618 ret = _abb5zes3_rtc_update_alarm(dev, false); 619 if (ret < 0) { 620 dev_err(dev, "%s: unable to disable alarm (%d)\n", __func__, 621 ret); 622 goto err; 623 } 624 ret = _abb5zes3_rtc_update_timer(dev, false); 625 if (ret < 0) { 626 dev_err(dev, "%s: unable to disable timer (%d)\n", __func__, 627 ret); 628 goto err; 629 } 630 631 data->timer_alarm = 0; 632 633 /* 634 * Let's now configure the alarm; if we are expected to ring in 635 * more than 240s, then we setup an alarm. Otherwise, a timer. 636 */ 637 if ((alarm_secs > rtc_secs) && ((alarm_secs - rtc_secs) <= 240)) 638 ret = _abb5zes3_rtc_set_timer(dev, alarm, 639 alarm_secs - rtc_secs); 640 else 641 ret = _abb5zes3_rtc_set_alarm(dev, alarm); 642 643 err: 644 mutex_unlock(&data->lock); 645 646 if (ret) 647 dev_err(dev, "%s: unable to configure alarm (%d)\n", __func__, 648 ret); 649 650 return ret; 651 } 652 653 /* Enable or disable battery low irq generation */ 654 static inline int _abb5zes3_rtc_battery_low_irq_enable(struct regmap *regmap, 655 bool enable) 656 { 657 return regmap_update_bits(regmap, ABB5ZES3_REG_CTRL3, 658 ABB5ZES3_REG_CTRL3_BLIE, 659 enable ? ABB5ZES3_REG_CTRL3_BLIE : 0); 660 } 661 662 /* 663 * Check current RTC status and enable/disable what needs to be. Return 0 if 664 * everything went ok and a negative value upon error. Note: this function 665 * is called early during init and hence does need mutex protection. 666 */ 667 static int abb5zes3_rtc_check_setup(struct device *dev) 668 { 669 struct abb5zes3_rtc_data *data = dev_get_drvdata(dev); 670 struct regmap *regmap = data->regmap; 671 unsigned int reg; 672 int ret; 673 u8 mask; 674 675 /* 676 * By default, the devices generates a 32.768KHz signal on IRQ#1 pin. It 677 * is disabled here to prevent polluting the interrupt line and 678 * uselessly triggering the IRQ handler we install for alarm and battery 679 * low events. Note: this is done before clearing int. status below 680 * in this function. 681 * We also disable all timers and set timer interrupt to permanent (not 682 * pulsed). 683 */ 684 mask = (ABB5ZES3_REG_TIM_CLK_TBC | ABB5ZES3_REG_TIM_CLK_TAC0 | 685 ABB5ZES3_REG_TIM_CLK_TAC1 | ABB5ZES3_REG_TIM_CLK_COF0 | 686 ABB5ZES3_REG_TIM_CLK_COF1 | ABB5ZES3_REG_TIM_CLK_COF2 | 687 ABB5ZES3_REG_TIM_CLK_TBM | ABB5ZES3_REG_TIM_CLK_TAM); 688 ret = regmap_update_bits(regmap, ABB5ZES3_REG_TIM_CLK, mask, 689 ABB5ZES3_REG_TIM_CLK_COF0 | ABB5ZES3_REG_TIM_CLK_COF1 | 690 ABB5ZES3_REG_TIM_CLK_COF2); 691 if (ret < 0) { 692 dev_err(dev, "%s: unable to initialize clkout register (%d)\n", 693 __func__, ret); 694 return ret; 695 } 696 697 /* 698 * Each component of the alarm (MN, HR, DT, DW) can be enabled/disabled 699 * individually by clearing/setting MSB of each associated register. So, 700 * we set all alarm enable bits to disable current alarm setting. 701 */ 702 mask = (ABB5ZES3_REG_ALRM_MN_AE | ABB5ZES3_REG_ALRM_HR_AE | 703 ABB5ZES3_REG_ALRM_DT_AE | ABB5ZES3_REG_ALRM_DW_AE); 704 ret = regmap_update_bits(regmap, ABB5ZES3_REG_CTRL2, mask, mask); 705 if (ret < 0) { 706 dev_err(dev, "%s: unable to disable alarm setting (%d)\n", 707 __func__, ret); 708 return ret; 709 } 710 711 /* Set Control 1 register (RTC enabled, 24hr mode, all int. disabled) */ 712 mask = (ABB5ZES3_REG_CTRL1_CIE | ABB5ZES3_REG_CTRL1_AIE | 713 ABB5ZES3_REG_CTRL1_SIE | ABB5ZES3_REG_CTRL1_PM | 714 ABB5ZES3_REG_CTRL1_CAP | ABB5ZES3_REG_CTRL1_STOP); 715 ret = regmap_update_bits(regmap, ABB5ZES3_REG_CTRL1, mask, 0); 716 if (ret < 0) { 717 dev_err(dev, "%s: unable to initialize CTRL1 register (%d)\n", 718 __func__, ret); 719 return ret; 720 } 721 722 /* 723 * Set Control 2 register (timer int. disabled, alarm status cleared). 724 * WTAF is read-only and cleared automatically by reading the register. 725 */ 726 mask = (ABB5ZES3_REG_CTRL2_CTBIE | ABB5ZES3_REG_CTRL2_CTAIE | 727 ABB5ZES3_REG_CTRL2_WTAIE | ABB5ZES3_REG_CTRL2_AF | 728 ABB5ZES3_REG_CTRL2_SF | ABB5ZES3_REG_CTRL2_CTBF | 729 ABB5ZES3_REG_CTRL2_CTAF); 730 ret = regmap_update_bits(regmap, ABB5ZES3_REG_CTRL2, mask, 0); 731 if (ret < 0) { 732 dev_err(dev, "%s: unable to initialize CTRL2 register (%d)\n", 733 __func__, ret); 734 return ret; 735 } 736 737 /* 738 * Enable battery low detection function and battery switchover function 739 * (standard mode). Disable associated interrupts. Clear battery 740 * switchover flag but not battery low flag. The latter is checked 741 * later below. 742 */ 743 mask = (ABB5ZES3_REG_CTRL3_PM0 | ABB5ZES3_REG_CTRL3_PM1 | 744 ABB5ZES3_REG_CTRL3_PM2 | ABB5ZES3_REG_CTRL3_BLIE | 745 ABB5ZES3_REG_CTRL3_BSIE| ABB5ZES3_REG_CTRL3_BSF); 746 ret = regmap_update_bits(regmap, ABB5ZES3_REG_CTRL3, mask, 0); 747 if (ret < 0) { 748 dev_err(dev, "%s: unable to initialize CTRL3 register (%d)\n", 749 __func__, ret); 750 return ret; 751 } 752 753 /* Check oscillator integrity flag */ 754 ret = regmap_read(regmap, ABB5ZES3_REG_RTC_SC, ®); 755 if (ret < 0) { 756 dev_err(dev, "%s: unable to read osc. integrity flag (%d)\n", 757 __func__, ret); 758 return ret; 759 } 760 761 if (reg & ABB5ZES3_REG_RTC_SC_OSC) { 762 dev_err(dev, "clock integrity not guaranteed. Osc. has stopped " 763 "or has been interrupted.\n"); 764 dev_err(dev, "change battery (if not already done) and " 765 "then set time to reset osc. failure flag.\n"); 766 } 767 768 /* 769 * Check battery low flag at startup: this allows reporting battery 770 * is low at startup when IRQ line is not connected. Note: we record 771 * current status to avoid reenabling this interrupt later in probe 772 * function if battery is low. 773 */ 774 ret = regmap_read(regmap, ABB5ZES3_REG_CTRL3, ®); 775 if (ret < 0) { 776 dev_err(dev, "%s: unable to read battery low flag (%d)\n", 777 __func__, ret); 778 return ret; 779 } 780 781 data->battery_low = reg & ABB5ZES3_REG_CTRL3_BLF; 782 if (data->battery_low) { 783 dev_err(dev, "RTC battery is low; please, consider " 784 "changing it!\n"); 785 786 ret = _abb5zes3_rtc_battery_low_irq_enable(regmap, false); 787 if (ret) 788 dev_err(dev, "%s: disabling battery low interrupt " 789 "generation failed (%d)\n", __func__, ret); 790 } 791 792 return ret; 793 } 794 795 static int abb5zes3_rtc_alarm_irq_enable(struct device *dev, 796 unsigned int enable) 797 { 798 struct abb5zes3_rtc_data *rtc_data = dev_get_drvdata(dev); 799 int ret = 0; 800 801 if (rtc_data->irq) { 802 mutex_lock(&rtc_data->lock); 803 if (rtc_data->timer_alarm) 804 ret = _abb5zes3_rtc_update_timer(dev, enable); 805 else 806 ret = _abb5zes3_rtc_update_alarm(dev, enable); 807 mutex_unlock(&rtc_data->lock); 808 } 809 810 return ret; 811 } 812 813 static irqreturn_t _abb5zes3_rtc_interrupt(int irq, void *data) 814 { 815 struct i2c_client *client = data; 816 struct device *dev = &client->dev; 817 struct abb5zes3_rtc_data *rtc_data = dev_get_drvdata(dev); 818 struct rtc_device *rtc = rtc_data->rtc; 819 u8 regs[ABB5ZES3_CTRL_SEC_LEN]; 820 int ret, handled = IRQ_NONE; 821 822 ret = regmap_bulk_read(rtc_data->regmap, 0, regs, 823 ABB5ZES3_CTRL_SEC_LEN); 824 if (ret) { 825 dev_err(dev, "%s: unable to read control section (%d)!\n", 826 __func__, ret); 827 return handled; 828 } 829 830 /* 831 * Check battery low detection flag and disable battery low interrupt 832 * generation if flag is set (interrupt can only be cleared when 833 * battery is replaced). 834 */ 835 if (regs[ABB5ZES3_REG_CTRL3] & ABB5ZES3_REG_CTRL3_BLF) { 836 dev_err(dev, "RTC battery is low; please change it!\n"); 837 838 _abb5zes3_rtc_battery_low_irq_enable(rtc_data->regmap, false); 839 840 handled = IRQ_HANDLED; 841 } 842 843 /* Check alarm flag */ 844 if (regs[ABB5ZES3_REG_CTRL2] & ABB5ZES3_REG_CTRL2_AF) { 845 dev_dbg(dev, "RTC alarm!\n"); 846 847 rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF); 848 849 /* Acknowledge and disable the alarm */ 850 _abb5zes3_rtc_clear_alarm(dev); 851 _abb5zes3_rtc_update_alarm(dev, 0); 852 853 handled = IRQ_HANDLED; 854 } 855 856 /* Check watchdog Timer A flag */ 857 if (regs[ABB5ZES3_REG_CTRL2] & ABB5ZES3_REG_CTRL2_WTAF) { 858 dev_dbg(dev, "RTC timer!\n"); 859 860 rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF); 861 862 /* 863 * Acknowledge and disable the alarm. Note: WTAF 864 * flag had been cleared when reading CTRL2 865 */ 866 _abb5zes3_rtc_update_timer(dev, 0); 867 868 rtc_data->timer_alarm = 0; 869 870 handled = IRQ_HANDLED; 871 } 872 873 return handled; 874 } 875 876 static const struct rtc_class_ops rtc_ops = { 877 .read_time = _abb5zes3_rtc_read_time, 878 .set_time = abb5zes3_rtc_set_time, 879 .read_alarm = abb5zes3_rtc_read_alarm, 880 .set_alarm = abb5zes3_rtc_set_alarm, 881 .alarm_irq_enable = abb5zes3_rtc_alarm_irq_enable, 882 }; 883 884 static struct regmap_config abb5zes3_rtc_regmap_config = { 885 .reg_bits = 8, 886 .val_bits = 8, 887 }; 888 889 static int abb5zes3_probe(struct i2c_client *client, 890 const struct i2c_device_id *id) 891 { 892 struct abb5zes3_rtc_data *data = NULL; 893 struct device *dev = &client->dev; 894 struct regmap *regmap; 895 int ret; 896 897 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C | 898 I2C_FUNC_SMBUS_BYTE_DATA | 899 I2C_FUNC_SMBUS_I2C_BLOCK)) { 900 ret = -ENODEV; 901 goto err; 902 } 903 904 regmap = devm_regmap_init_i2c(client, &abb5zes3_rtc_regmap_config); 905 if (IS_ERR(regmap)) { 906 ret = PTR_ERR(regmap); 907 dev_err(dev, "%s: regmap allocation failed: %d\n", 908 __func__, ret); 909 goto err; 910 } 911 912 ret = abb5zes3_i2c_validate_chip(regmap); 913 if (ret) 914 goto err; 915 916 data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); 917 if (!data) { 918 ret = -ENOMEM; 919 goto err; 920 } 921 922 mutex_init(&data->lock); 923 data->regmap = regmap; 924 dev_set_drvdata(dev, data); 925 926 ret = abb5zes3_rtc_check_setup(dev); 927 if (ret) 928 goto err; 929 930 if (client->irq > 0) { 931 ret = devm_request_threaded_irq(dev, client->irq, NULL, 932 _abb5zes3_rtc_interrupt, 933 IRQF_SHARED|IRQF_ONESHOT, 934 DRV_NAME, client); 935 if (!ret) { 936 device_init_wakeup(dev, true); 937 data->irq = client->irq; 938 dev_dbg(dev, "%s: irq %d used by RTC\n", __func__, 939 client->irq); 940 } else { 941 dev_err(dev, "%s: irq %d unavailable (%d)\n", 942 __func__, client->irq, ret); 943 goto err; 944 } 945 } 946 947 data->rtc = devm_rtc_device_register(dev, DRV_NAME, &rtc_ops, 948 THIS_MODULE); 949 ret = PTR_ERR_OR_ZERO(data->rtc); 950 if (ret) { 951 dev_err(dev, "%s: unable to register RTC device (%d)\n", 952 __func__, ret); 953 goto err; 954 } 955 956 /* Enable battery low detection interrupt if battery not already low */ 957 if (!data->battery_low && data->irq) { 958 ret = _abb5zes3_rtc_battery_low_irq_enable(regmap, true); 959 if (ret) { 960 dev_err(dev, "%s: enabling battery low interrupt " 961 "generation failed (%d)\n", __func__, ret); 962 goto err; 963 } 964 } 965 966 err: 967 if (ret && data && data->irq) 968 device_init_wakeup(dev, false); 969 return ret; 970 } 971 972 static int abb5zes3_remove(struct i2c_client *client) 973 { 974 struct abb5zes3_rtc_data *rtc_data = dev_get_drvdata(&client->dev); 975 976 if (rtc_data->irq > 0) 977 device_init_wakeup(&client->dev, false); 978 979 return 0; 980 } 981 982 #ifdef CONFIG_PM_SLEEP 983 static int abb5zes3_rtc_suspend(struct device *dev) 984 { 985 struct abb5zes3_rtc_data *rtc_data = dev_get_drvdata(dev); 986 987 if (device_may_wakeup(dev)) 988 return enable_irq_wake(rtc_data->irq); 989 990 return 0; 991 } 992 993 static int abb5zes3_rtc_resume(struct device *dev) 994 { 995 struct abb5zes3_rtc_data *rtc_data = dev_get_drvdata(dev); 996 997 if (device_may_wakeup(dev)) 998 return disable_irq_wake(rtc_data->irq); 999 1000 return 0; 1001 } 1002 #endif 1003 1004 static SIMPLE_DEV_PM_OPS(abb5zes3_rtc_pm_ops, abb5zes3_rtc_suspend, 1005 abb5zes3_rtc_resume); 1006 1007 #ifdef CONFIG_OF 1008 static const struct of_device_id abb5zes3_dt_match[] = { 1009 { .compatible = "abracon,abb5zes3" }, 1010 { }, 1011 }; 1012 #endif 1013 1014 static const struct i2c_device_id abb5zes3_id[] = { 1015 { "abb5zes3", 0 }, 1016 { } 1017 }; 1018 MODULE_DEVICE_TABLE(i2c, abb5zes3_id); 1019 1020 static struct i2c_driver abb5zes3_driver = { 1021 .driver = { 1022 .name = DRV_NAME, 1023 .owner = THIS_MODULE, 1024 .pm = &abb5zes3_rtc_pm_ops, 1025 .of_match_table = of_match_ptr(abb5zes3_dt_match), 1026 }, 1027 .probe = abb5zes3_probe, 1028 .remove = abb5zes3_remove, 1029 .id_table = abb5zes3_id, 1030 }; 1031 module_i2c_driver(abb5zes3_driver); 1032 1033 MODULE_AUTHOR("Arnaud EBALARD <arno@natisbad.org>"); 1034 MODULE_DESCRIPTION("Abracon AB-RTCMC-32.768kHz-B5ZE-S3 RTC/Alarm driver"); 1035 MODULE_LICENSE("GPL"); 1036