1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Virtio-based remote processor messaging bus
4  *
5  * Copyright (C) 2011 Texas Instruments, Inc.
6  * Copyright (C) 2011 Google, Inc.
7  *
8  * Ohad Ben-Cohen <ohad@wizery.com>
9  * Brian Swetland <swetland@google.com>
10  */
11 
12 #define pr_fmt(fmt) "%s: " fmt, __func__
13 
14 #include <linux/dma-mapping.h>
15 #include <linux/idr.h>
16 #include <linux/jiffies.h>
17 #include <linux/kernel.h>
18 #include <linux/module.h>
19 #include <linux/mutex.h>
20 #include <linux/rpmsg.h>
21 #include <linux/rpmsg/byteorder.h>
22 #include <linux/rpmsg/ns.h>
23 #include <linux/scatterlist.h>
24 #include <linux/slab.h>
25 #include <linux/sched.h>
26 #include <linux/virtio.h>
27 #include <linux/virtio_ids.h>
28 #include <linux/virtio_config.h>
29 #include <linux/wait.h>
30 
31 #include "rpmsg_internal.h"
32 
33 /**
34  * struct virtproc_info - virtual remote processor state
35  * @vdev:	the virtio device
36  * @rvq:	rx virtqueue
37  * @svq:	tx virtqueue
38  * @rbufs:	kernel address of rx buffers
39  * @sbufs:	kernel address of tx buffers
40  * @num_bufs:	total number of buffers for rx and tx
41  * @buf_size:   size of one rx or tx buffer
42  * @last_sbuf:	index of last tx buffer used
43  * @bufs_dma:	dma base addr of the buffers
44  * @tx_lock:	protects svq, sbufs and sleepers, to allow concurrent senders.
45  *		sending a message might require waking up a dozing remote
46  *		processor, which involves sleeping, hence the mutex.
47  * @endpoints:	idr of local endpoints, allows fast retrieval
48  * @endpoints_lock: lock of the endpoints set
49  * @sendq:	wait queue of sending contexts waiting for a tx buffers
50  * @sleepers:	number of senders that are waiting for a tx buffer
51  *
52  * This structure stores the rpmsg state of a given virtio remote processor
53  * device (there might be several virtio proc devices for each physical
54  * remote processor).
55  */
56 struct virtproc_info {
57 	struct virtio_device *vdev;
58 	struct virtqueue *rvq, *svq;
59 	void *rbufs, *sbufs;
60 	unsigned int num_bufs;
61 	unsigned int buf_size;
62 	int last_sbuf;
63 	dma_addr_t bufs_dma;
64 	struct mutex tx_lock;
65 	struct idr endpoints;
66 	struct mutex endpoints_lock;
67 	wait_queue_head_t sendq;
68 	atomic_t sleepers;
69 };
70 
71 /* The feature bitmap for virtio rpmsg */
72 #define VIRTIO_RPMSG_F_NS	0 /* RP supports name service notifications */
73 
74 /**
75  * struct rpmsg_hdr - common header for all rpmsg messages
76  * @src: source address
77  * @dst: destination address
78  * @reserved: reserved for future use
79  * @len: length of payload (in bytes)
80  * @flags: message flags
81  * @data: @len bytes of message payload data
82  *
83  * Every message sent(/received) on the rpmsg bus begins with this header.
84  */
85 struct rpmsg_hdr {
86 	__rpmsg32 src;
87 	__rpmsg32 dst;
88 	__rpmsg32 reserved;
89 	__rpmsg16 len;
90 	__rpmsg16 flags;
91 	u8 data[];
92 } __packed;
93 
94 
95 /**
96  * struct virtio_rpmsg_channel - rpmsg channel descriptor
97  * @rpdev: the rpmsg channel device
98  * @vrp: the virtio remote processor device this channel belongs to
99  *
100  * This structure stores the channel that links the rpmsg device to the virtio
101  * remote processor device.
102  */
103 struct virtio_rpmsg_channel {
104 	struct rpmsg_device rpdev;
105 
106 	struct virtproc_info *vrp;
107 };
108 
109 #define to_virtio_rpmsg_channel(_rpdev) \
110 	container_of(_rpdev, struct virtio_rpmsg_channel, rpdev)
111 
112 /*
113  * We're allocating buffers of 512 bytes each for communications. The
114  * number of buffers will be computed from the number of buffers supported
115  * by the vring, upto a maximum of 512 buffers (256 in each direction).
116  *
117  * Each buffer will have 16 bytes for the msg header and 496 bytes for
118  * the payload.
119  *
120  * This will utilize a maximum total space of 256KB for the buffers.
121  *
122  * We might also want to add support for user-provided buffers in time.
123  * This will allow bigger buffer size flexibility, and can also be used
124  * to achieve zero-copy messaging.
125  *
126  * Note that these numbers are purely a decision of this driver - we
127  * can change this without changing anything in the firmware of the remote
128  * processor.
129  */
130 #define MAX_RPMSG_NUM_BUFS	(512)
131 #define MAX_RPMSG_BUF_SIZE	(512)
132 
133 /*
134  * Local addresses are dynamically allocated on-demand.
135  * We do not dynamically assign addresses from the low 1024 range,
136  * in order to reserve that address range for predefined services.
137  */
138 #define RPMSG_RESERVED_ADDRESSES	(1024)
139 
140 static void virtio_rpmsg_destroy_ept(struct rpmsg_endpoint *ept);
141 static int virtio_rpmsg_send(struct rpmsg_endpoint *ept, void *data, int len);
142 static int virtio_rpmsg_sendto(struct rpmsg_endpoint *ept, void *data, int len,
143 			       u32 dst);
144 static int virtio_rpmsg_send_offchannel(struct rpmsg_endpoint *ept, u32 src,
145 					u32 dst, void *data, int len);
146 static int virtio_rpmsg_trysend(struct rpmsg_endpoint *ept, void *data, int len);
147 static int virtio_rpmsg_trysendto(struct rpmsg_endpoint *ept, void *data,
148 				  int len, u32 dst);
149 static int virtio_rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src,
150 					   u32 dst, void *data, int len);
151 static ssize_t virtio_rpmsg_get_mtu(struct rpmsg_endpoint *ept);
152 static struct rpmsg_device *__rpmsg_create_channel(struct virtproc_info *vrp,
153 						   struct rpmsg_channel_info *chinfo);
154 
155 static const struct rpmsg_endpoint_ops virtio_endpoint_ops = {
156 	.destroy_ept = virtio_rpmsg_destroy_ept,
157 	.send = virtio_rpmsg_send,
158 	.sendto = virtio_rpmsg_sendto,
159 	.send_offchannel = virtio_rpmsg_send_offchannel,
160 	.trysend = virtio_rpmsg_trysend,
161 	.trysendto = virtio_rpmsg_trysendto,
162 	.trysend_offchannel = virtio_rpmsg_trysend_offchannel,
163 	.get_mtu = virtio_rpmsg_get_mtu,
164 };
165 
166 /**
167  * rpmsg_sg_init - initialize scatterlist according to cpu address location
168  * @sg: scatterlist to fill
169  * @cpu_addr: virtual address of the buffer
170  * @len: buffer length
171  *
172  * An internal function filling scatterlist according to virtual address
173  * location (in vmalloc or in kernel).
174  */
175 static void
176 rpmsg_sg_init(struct scatterlist *sg, void *cpu_addr, unsigned int len)
177 {
178 	if (is_vmalloc_addr(cpu_addr)) {
179 		sg_init_table(sg, 1);
180 		sg_set_page(sg, vmalloc_to_page(cpu_addr), len,
181 			    offset_in_page(cpu_addr));
182 	} else {
183 		WARN_ON(!virt_addr_valid(cpu_addr));
184 		sg_init_one(sg, cpu_addr, len);
185 	}
186 }
187 
188 /**
189  * __ept_release() - deallocate an rpmsg endpoint
190  * @kref: the ept's reference count
191  *
192  * This function deallocates an ept, and is invoked when its @kref refcount
193  * drops to zero.
194  *
195  * Never invoke this function directly!
196  */
197 static void __ept_release(struct kref *kref)
198 {
199 	struct rpmsg_endpoint *ept = container_of(kref, struct rpmsg_endpoint,
200 						  refcount);
201 	/*
202 	 * At this point no one holds a reference to ept anymore,
203 	 * so we can directly free it
204 	 */
205 	kfree(ept);
206 }
207 
208 /* for more info, see below documentation of rpmsg_create_ept() */
209 static struct rpmsg_endpoint *__rpmsg_create_ept(struct virtproc_info *vrp,
210 						 struct rpmsg_device *rpdev,
211 						 rpmsg_rx_cb_t cb,
212 						 void *priv, u32 addr)
213 {
214 	int id_min, id_max, id;
215 	struct rpmsg_endpoint *ept;
216 	struct device *dev = rpdev ? &rpdev->dev : &vrp->vdev->dev;
217 
218 	ept = kzalloc(sizeof(*ept), GFP_KERNEL);
219 	if (!ept)
220 		return NULL;
221 
222 	kref_init(&ept->refcount);
223 	mutex_init(&ept->cb_lock);
224 
225 	ept->rpdev = rpdev;
226 	ept->cb = cb;
227 	ept->priv = priv;
228 	ept->ops = &virtio_endpoint_ops;
229 
230 	/* do we need to allocate a local address ? */
231 	if (addr == RPMSG_ADDR_ANY) {
232 		id_min = RPMSG_RESERVED_ADDRESSES;
233 		id_max = 0;
234 	} else {
235 		id_min = addr;
236 		id_max = addr + 1;
237 	}
238 
239 	mutex_lock(&vrp->endpoints_lock);
240 
241 	/* bind the endpoint to an rpmsg address (and allocate one if needed) */
242 	id = idr_alloc(&vrp->endpoints, ept, id_min, id_max, GFP_KERNEL);
243 	if (id < 0) {
244 		dev_err(dev, "idr_alloc failed: %d\n", id);
245 		goto free_ept;
246 	}
247 	ept->addr = id;
248 
249 	mutex_unlock(&vrp->endpoints_lock);
250 
251 	return ept;
252 
253 free_ept:
254 	mutex_unlock(&vrp->endpoints_lock);
255 	kref_put(&ept->refcount, __ept_release);
256 	return NULL;
257 }
258 
259 static struct rpmsg_device *virtio_rpmsg_create_channel(struct rpmsg_device *rpdev,
260 							struct rpmsg_channel_info *chinfo)
261 {
262 	struct virtio_rpmsg_channel *vch = to_virtio_rpmsg_channel(rpdev);
263 	struct virtproc_info *vrp = vch->vrp;
264 
265 	return __rpmsg_create_channel(vrp, chinfo);
266 }
267 
268 static int virtio_rpmsg_release_channel(struct rpmsg_device *rpdev,
269 					struct rpmsg_channel_info *chinfo)
270 {
271 	struct virtio_rpmsg_channel *vch = to_virtio_rpmsg_channel(rpdev);
272 	struct virtproc_info *vrp = vch->vrp;
273 
274 	return rpmsg_unregister_device(&vrp->vdev->dev, chinfo);
275 }
276 
277 static struct rpmsg_endpoint *virtio_rpmsg_create_ept(struct rpmsg_device *rpdev,
278 						      rpmsg_rx_cb_t cb,
279 						      void *priv,
280 						      struct rpmsg_channel_info chinfo)
281 {
282 	struct virtio_rpmsg_channel *vch = to_virtio_rpmsg_channel(rpdev);
283 
284 	return __rpmsg_create_ept(vch->vrp, rpdev, cb, priv, chinfo.src);
285 }
286 
287 /**
288  * __rpmsg_destroy_ept() - destroy an existing rpmsg endpoint
289  * @vrp: virtproc which owns this ept
290  * @ept: endpoing to destroy
291  *
292  * An internal function which destroy an ept without assuming it is
293  * bound to an rpmsg channel. This is needed for handling the internal
294  * name service endpoint, which isn't bound to an rpmsg channel.
295  * See also __rpmsg_create_ept().
296  */
297 static void
298 __rpmsg_destroy_ept(struct virtproc_info *vrp, struct rpmsg_endpoint *ept)
299 {
300 	/* make sure new inbound messages can't find this ept anymore */
301 	mutex_lock(&vrp->endpoints_lock);
302 	idr_remove(&vrp->endpoints, ept->addr);
303 	mutex_unlock(&vrp->endpoints_lock);
304 
305 	/* make sure in-flight inbound messages won't invoke cb anymore */
306 	mutex_lock(&ept->cb_lock);
307 	ept->cb = NULL;
308 	mutex_unlock(&ept->cb_lock);
309 
310 	kref_put(&ept->refcount, __ept_release);
311 }
312 
313 static void virtio_rpmsg_destroy_ept(struct rpmsg_endpoint *ept)
314 {
315 	struct virtio_rpmsg_channel *vch = to_virtio_rpmsg_channel(ept->rpdev);
316 
317 	__rpmsg_destroy_ept(vch->vrp, ept);
318 }
319 
320 static int virtio_rpmsg_announce_create(struct rpmsg_device *rpdev)
321 {
322 	struct virtio_rpmsg_channel *vch = to_virtio_rpmsg_channel(rpdev);
323 	struct virtproc_info *vrp = vch->vrp;
324 	struct device *dev = &rpdev->dev;
325 	int err = 0;
326 
327 	/* need to tell remote processor's name service about this channel ? */
328 	if (rpdev->announce && rpdev->ept &&
329 	    virtio_has_feature(vrp->vdev, VIRTIO_RPMSG_F_NS)) {
330 		struct rpmsg_ns_msg nsm;
331 
332 		strncpy(nsm.name, rpdev->id.name, RPMSG_NAME_SIZE);
333 		nsm.addr = cpu_to_rpmsg32(rpdev, rpdev->ept->addr);
334 		nsm.flags = cpu_to_rpmsg32(rpdev, RPMSG_NS_CREATE);
335 
336 		err = rpmsg_sendto(rpdev->ept, &nsm, sizeof(nsm), RPMSG_NS_ADDR);
337 		if (err)
338 			dev_err(dev, "failed to announce service %d\n", err);
339 	}
340 
341 	return err;
342 }
343 
344 static int virtio_rpmsg_announce_destroy(struct rpmsg_device *rpdev)
345 {
346 	struct virtio_rpmsg_channel *vch = to_virtio_rpmsg_channel(rpdev);
347 	struct virtproc_info *vrp = vch->vrp;
348 	struct device *dev = &rpdev->dev;
349 	int err = 0;
350 
351 	/* tell remote processor's name service we're removing this channel */
352 	if (rpdev->announce && rpdev->ept &&
353 	    virtio_has_feature(vrp->vdev, VIRTIO_RPMSG_F_NS)) {
354 		struct rpmsg_ns_msg nsm;
355 
356 		strncpy(nsm.name, rpdev->id.name, RPMSG_NAME_SIZE);
357 		nsm.addr = cpu_to_rpmsg32(rpdev, rpdev->ept->addr);
358 		nsm.flags = cpu_to_rpmsg32(rpdev, RPMSG_NS_DESTROY);
359 
360 		err = rpmsg_sendto(rpdev->ept, &nsm, sizeof(nsm), RPMSG_NS_ADDR);
361 		if (err)
362 			dev_err(dev, "failed to announce service %d\n", err);
363 	}
364 
365 	return err;
366 }
367 
368 static const struct rpmsg_device_ops virtio_rpmsg_ops = {
369 	.create_channel = virtio_rpmsg_create_channel,
370 	.release_channel = virtio_rpmsg_release_channel,
371 	.create_ept = virtio_rpmsg_create_ept,
372 	.announce_create = virtio_rpmsg_announce_create,
373 	.announce_destroy = virtio_rpmsg_announce_destroy,
374 };
375 
376 static void virtio_rpmsg_release_device(struct device *dev)
377 {
378 	struct rpmsg_device *rpdev = to_rpmsg_device(dev);
379 	struct virtio_rpmsg_channel *vch = to_virtio_rpmsg_channel(rpdev);
380 
381 	kfree(vch);
382 }
383 
384 /*
385  * create an rpmsg channel using its name and address info.
386  * this function will be used to create both static and dynamic
387  * channels.
388  */
389 static struct rpmsg_device *__rpmsg_create_channel(struct virtproc_info *vrp,
390 						   struct rpmsg_channel_info *chinfo)
391 {
392 	struct virtio_rpmsg_channel *vch;
393 	struct rpmsg_device *rpdev;
394 	struct device *tmp, *dev = &vrp->vdev->dev;
395 	int ret;
396 
397 	/* make sure a similar channel doesn't already exist */
398 	tmp = rpmsg_find_device(dev, chinfo);
399 	if (tmp) {
400 		/* decrement the matched device's refcount back */
401 		put_device(tmp);
402 		dev_err(dev, "channel %s:%x:%x already exist\n",
403 				chinfo->name, chinfo->src, chinfo->dst);
404 		return NULL;
405 	}
406 
407 	vch = kzalloc(sizeof(*vch), GFP_KERNEL);
408 	if (!vch)
409 		return NULL;
410 
411 	/* Link the channel to our vrp */
412 	vch->vrp = vrp;
413 
414 	/* Assign public information to the rpmsg_device */
415 	rpdev = &vch->rpdev;
416 	rpdev->src = chinfo->src;
417 	rpdev->dst = chinfo->dst;
418 	rpdev->ops = &virtio_rpmsg_ops;
419 	rpdev->little_endian = virtio_is_little_endian(vrp->vdev);
420 
421 	/*
422 	 * rpmsg server channels has predefined local address (for now),
423 	 * and their existence needs to be announced remotely
424 	 */
425 	rpdev->announce = rpdev->src != RPMSG_ADDR_ANY;
426 
427 	strncpy(rpdev->id.name, chinfo->name, RPMSG_NAME_SIZE);
428 
429 	rpdev->dev.parent = &vrp->vdev->dev;
430 	rpdev->dev.release = virtio_rpmsg_release_device;
431 	ret = rpmsg_register_device(rpdev);
432 	if (ret)
433 		return NULL;
434 
435 	return rpdev;
436 }
437 
438 /* super simple buffer "allocator" that is just enough for now */
439 static void *get_a_tx_buf(struct virtproc_info *vrp)
440 {
441 	unsigned int len;
442 	void *ret;
443 
444 	/* support multiple concurrent senders */
445 	mutex_lock(&vrp->tx_lock);
446 
447 	/*
448 	 * either pick the next unused tx buffer
449 	 * (half of our buffers are used for sending messages)
450 	 */
451 	if (vrp->last_sbuf < vrp->num_bufs / 2)
452 		ret = vrp->sbufs + vrp->buf_size * vrp->last_sbuf++;
453 	/* or recycle a used one */
454 	else
455 		ret = virtqueue_get_buf(vrp->svq, &len);
456 
457 	mutex_unlock(&vrp->tx_lock);
458 
459 	return ret;
460 }
461 
462 /**
463  * rpmsg_upref_sleepers() - enable "tx-complete" interrupts, if needed
464  * @vrp: virtual remote processor state
465  *
466  * This function is called before a sender is blocked, waiting for
467  * a tx buffer to become available.
468  *
469  * If we already have blocking senders, this function merely increases
470  * the "sleepers" reference count, and exits.
471  *
472  * Otherwise, if this is the first sender to block, we also enable
473  * virtio's tx callbacks, so we'd be immediately notified when a tx
474  * buffer is consumed (we rely on virtio's tx callback in order
475  * to wake up sleeping senders as soon as a tx buffer is used by the
476  * remote processor).
477  */
478 static void rpmsg_upref_sleepers(struct virtproc_info *vrp)
479 {
480 	/* support multiple concurrent senders */
481 	mutex_lock(&vrp->tx_lock);
482 
483 	/* are we the first sleeping context waiting for tx buffers ? */
484 	if (atomic_inc_return(&vrp->sleepers) == 1)
485 		/* enable "tx-complete" interrupts before dozing off */
486 		virtqueue_enable_cb(vrp->svq);
487 
488 	mutex_unlock(&vrp->tx_lock);
489 }
490 
491 /**
492  * rpmsg_downref_sleepers() - disable "tx-complete" interrupts, if needed
493  * @vrp: virtual remote processor state
494  *
495  * This function is called after a sender, that waited for a tx buffer
496  * to become available, is unblocked.
497  *
498  * If we still have blocking senders, this function merely decreases
499  * the "sleepers" reference count, and exits.
500  *
501  * Otherwise, if there are no more blocking senders, we also disable
502  * virtio's tx callbacks, to avoid the overhead incurred with handling
503  * those (now redundant) interrupts.
504  */
505 static void rpmsg_downref_sleepers(struct virtproc_info *vrp)
506 {
507 	/* support multiple concurrent senders */
508 	mutex_lock(&vrp->tx_lock);
509 
510 	/* are we the last sleeping context waiting for tx buffers ? */
511 	if (atomic_dec_and_test(&vrp->sleepers))
512 		/* disable "tx-complete" interrupts */
513 		virtqueue_disable_cb(vrp->svq);
514 
515 	mutex_unlock(&vrp->tx_lock);
516 }
517 
518 /**
519  * rpmsg_send_offchannel_raw() - send a message across to the remote processor
520  * @rpdev: the rpmsg channel
521  * @src: source address
522  * @dst: destination address
523  * @data: payload of message
524  * @len: length of payload
525  * @wait: indicates whether caller should block in case no TX buffers available
526  *
527  * This function is the base implementation for all of the rpmsg sending API.
528  *
529  * It will send @data of length @len to @dst, and say it's from @src. The
530  * message will be sent to the remote processor which the @rpdev channel
531  * belongs to.
532  *
533  * The message is sent using one of the TX buffers that are available for
534  * communication with this remote processor.
535  *
536  * If @wait is true, the caller will be blocked until either a TX buffer is
537  * available, or 15 seconds elapses (we don't want callers to
538  * sleep indefinitely due to misbehaving remote processors), and in that
539  * case -ERESTARTSYS is returned. The number '15' itself was picked
540  * arbitrarily; there's little point in asking drivers to provide a timeout
541  * value themselves.
542  *
543  * Otherwise, if @wait is false, and there are no TX buffers available,
544  * the function will immediately fail, and -ENOMEM will be returned.
545  *
546  * Normally drivers shouldn't use this function directly; instead, drivers
547  * should use the appropriate rpmsg_{try}send{to, _offchannel} API
548  * (see include/linux/rpmsg.h).
549  *
550  * Return: 0 on success and an appropriate error value on failure.
551  */
552 static int rpmsg_send_offchannel_raw(struct rpmsg_device *rpdev,
553 				     u32 src, u32 dst,
554 				     void *data, int len, bool wait)
555 {
556 	struct virtio_rpmsg_channel *vch = to_virtio_rpmsg_channel(rpdev);
557 	struct virtproc_info *vrp = vch->vrp;
558 	struct device *dev = &rpdev->dev;
559 	struct scatterlist sg;
560 	struct rpmsg_hdr *msg;
561 	int err;
562 
563 	/* bcasting isn't allowed */
564 	if (src == RPMSG_ADDR_ANY || dst == RPMSG_ADDR_ANY) {
565 		dev_err(dev, "invalid addr (src 0x%x, dst 0x%x)\n", src, dst);
566 		return -EINVAL;
567 	}
568 
569 	/*
570 	 * We currently use fixed-sized buffers, and therefore the payload
571 	 * length is limited.
572 	 *
573 	 * One of the possible improvements here is either to support
574 	 * user-provided buffers (and then we can also support zero-copy
575 	 * messaging), or to improve the buffer allocator, to support
576 	 * variable-length buffer sizes.
577 	 */
578 	if (len > vrp->buf_size - sizeof(struct rpmsg_hdr)) {
579 		dev_err(dev, "message is too big (%d)\n", len);
580 		return -EMSGSIZE;
581 	}
582 
583 	/* grab a buffer */
584 	msg = get_a_tx_buf(vrp);
585 	if (!msg && !wait)
586 		return -ENOMEM;
587 
588 	/* no free buffer ? wait for one (but bail after 15 seconds) */
589 	while (!msg) {
590 		/* enable "tx-complete" interrupts, if not already enabled */
591 		rpmsg_upref_sleepers(vrp);
592 
593 		/*
594 		 * sleep until a free buffer is available or 15 secs elapse.
595 		 * the timeout period is not configurable because there's
596 		 * little point in asking drivers to specify that.
597 		 * if later this happens to be required, it'd be easy to add.
598 		 */
599 		err = wait_event_interruptible_timeout(vrp->sendq,
600 					(msg = get_a_tx_buf(vrp)),
601 					msecs_to_jiffies(15000));
602 
603 		/* disable "tx-complete" interrupts if we're the last sleeper */
604 		rpmsg_downref_sleepers(vrp);
605 
606 		/* timeout ? */
607 		if (!err) {
608 			dev_err(dev, "timeout waiting for a tx buffer\n");
609 			return -ERESTARTSYS;
610 		}
611 	}
612 
613 	msg->len = cpu_to_rpmsg16(rpdev, len);
614 	msg->flags = 0;
615 	msg->src = cpu_to_rpmsg32(rpdev, src);
616 	msg->dst = cpu_to_rpmsg32(rpdev, dst);
617 	msg->reserved = 0;
618 	memcpy(msg->data, data, len);
619 
620 	dev_dbg(dev, "TX From 0x%x, To 0x%x, Len %d, Flags %d, Reserved %d\n",
621 		src, dst, len, msg->flags, msg->reserved);
622 #if defined(CONFIG_DYNAMIC_DEBUG)
623 	dynamic_hex_dump("rpmsg_virtio TX: ", DUMP_PREFIX_NONE, 16, 1,
624 			 msg, sizeof(*msg) + len, true);
625 #endif
626 
627 	rpmsg_sg_init(&sg, msg, sizeof(*msg) + len);
628 
629 	mutex_lock(&vrp->tx_lock);
630 
631 	/* add message to the remote processor's virtqueue */
632 	err = virtqueue_add_outbuf(vrp->svq, &sg, 1, msg, GFP_KERNEL);
633 	if (err) {
634 		/*
635 		 * need to reclaim the buffer here, otherwise it's lost
636 		 * (memory won't leak, but rpmsg won't use it again for TX).
637 		 * this will wait for a buffer management overhaul.
638 		 */
639 		dev_err(dev, "virtqueue_add_outbuf failed: %d\n", err);
640 		goto out;
641 	}
642 
643 	/* tell the remote processor it has a pending message to read */
644 	virtqueue_kick(vrp->svq);
645 out:
646 	mutex_unlock(&vrp->tx_lock);
647 	return err;
648 }
649 
650 static int virtio_rpmsg_send(struct rpmsg_endpoint *ept, void *data, int len)
651 {
652 	struct rpmsg_device *rpdev = ept->rpdev;
653 	u32 src = ept->addr, dst = rpdev->dst;
654 
655 	return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true);
656 }
657 
658 static int virtio_rpmsg_sendto(struct rpmsg_endpoint *ept, void *data, int len,
659 			       u32 dst)
660 {
661 	struct rpmsg_device *rpdev = ept->rpdev;
662 	u32 src = ept->addr;
663 
664 	return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true);
665 }
666 
667 static int virtio_rpmsg_send_offchannel(struct rpmsg_endpoint *ept, u32 src,
668 					u32 dst, void *data, int len)
669 {
670 	struct rpmsg_device *rpdev = ept->rpdev;
671 
672 	return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true);
673 }
674 
675 static int virtio_rpmsg_trysend(struct rpmsg_endpoint *ept, void *data, int len)
676 {
677 	struct rpmsg_device *rpdev = ept->rpdev;
678 	u32 src = ept->addr, dst = rpdev->dst;
679 
680 	return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false);
681 }
682 
683 static int virtio_rpmsg_trysendto(struct rpmsg_endpoint *ept, void *data,
684 				  int len, u32 dst)
685 {
686 	struct rpmsg_device *rpdev = ept->rpdev;
687 	u32 src = ept->addr;
688 
689 	return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false);
690 }
691 
692 static int virtio_rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src,
693 					   u32 dst, void *data, int len)
694 {
695 	struct rpmsg_device *rpdev = ept->rpdev;
696 
697 	return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false);
698 }
699 
700 static ssize_t virtio_rpmsg_get_mtu(struct rpmsg_endpoint *ept)
701 {
702 	struct rpmsg_device *rpdev = ept->rpdev;
703 	struct virtio_rpmsg_channel *vch = to_virtio_rpmsg_channel(rpdev);
704 
705 	return vch->vrp->buf_size - sizeof(struct rpmsg_hdr);
706 }
707 
708 static int rpmsg_recv_single(struct virtproc_info *vrp, struct device *dev,
709 			     struct rpmsg_hdr *msg, unsigned int len)
710 {
711 	struct rpmsg_endpoint *ept;
712 	struct scatterlist sg;
713 	bool little_endian = virtio_is_little_endian(vrp->vdev);
714 	unsigned int msg_len = __rpmsg16_to_cpu(little_endian, msg->len);
715 	int err;
716 
717 	dev_dbg(dev, "From: 0x%x, To: 0x%x, Len: %d, Flags: %d, Reserved: %d\n",
718 		__rpmsg32_to_cpu(little_endian, msg->src),
719 		__rpmsg32_to_cpu(little_endian, msg->dst), msg_len,
720 		__rpmsg16_to_cpu(little_endian, msg->flags),
721 		__rpmsg32_to_cpu(little_endian, msg->reserved));
722 #if defined(CONFIG_DYNAMIC_DEBUG)
723 	dynamic_hex_dump("rpmsg_virtio RX: ", DUMP_PREFIX_NONE, 16, 1,
724 			 msg, sizeof(*msg) + msg_len, true);
725 #endif
726 
727 	/*
728 	 * We currently use fixed-sized buffers, so trivially sanitize
729 	 * the reported payload length.
730 	 */
731 	if (len > vrp->buf_size ||
732 	    msg_len > (len - sizeof(struct rpmsg_hdr))) {
733 		dev_warn(dev, "inbound msg too big: (%d, %d)\n", len, msg_len);
734 		return -EINVAL;
735 	}
736 
737 	/* use the dst addr to fetch the callback of the appropriate user */
738 	mutex_lock(&vrp->endpoints_lock);
739 
740 	ept = idr_find(&vrp->endpoints, __rpmsg32_to_cpu(little_endian, msg->dst));
741 
742 	/* let's make sure no one deallocates ept while we use it */
743 	if (ept)
744 		kref_get(&ept->refcount);
745 
746 	mutex_unlock(&vrp->endpoints_lock);
747 
748 	if (ept) {
749 		/* make sure ept->cb doesn't go away while we use it */
750 		mutex_lock(&ept->cb_lock);
751 
752 		if (ept->cb)
753 			ept->cb(ept->rpdev, msg->data, msg_len, ept->priv,
754 				__rpmsg32_to_cpu(little_endian, msg->src));
755 
756 		mutex_unlock(&ept->cb_lock);
757 
758 		/* farewell, ept, we don't need you anymore */
759 		kref_put(&ept->refcount, __ept_release);
760 	} else
761 		dev_warn_ratelimited(dev, "msg received with no recipient\n");
762 
763 	/* publish the real size of the buffer */
764 	rpmsg_sg_init(&sg, msg, vrp->buf_size);
765 
766 	/* add the buffer back to the remote processor's virtqueue */
767 	err = virtqueue_add_inbuf(vrp->rvq, &sg, 1, msg, GFP_KERNEL);
768 	if (err < 0) {
769 		dev_err(dev, "failed to add a virtqueue buffer: %d\n", err);
770 		return err;
771 	}
772 
773 	return 0;
774 }
775 
776 /* called when an rx buffer is used, and it's time to digest a message */
777 static void rpmsg_recv_done(struct virtqueue *rvq)
778 {
779 	struct virtproc_info *vrp = rvq->vdev->priv;
780 	struct device *dev = &rvq->vdev->dev;
781 	struct rpmsg_hdr *msg;
782 	unsigned int len, msgs_received = 0;
783 	int err;
784 
785 	msg = virtqueue_get_buf(rvq, &len);
786 	if (!msg) {
787 		dev_err(dev, "uhm, incoming signal, but no used buffer ?\n");
788 		return;
789 	}
790 
791 	while (msg) {
792 		err = rpmsg_recv_single(vrp, dev, msg, len);
793 		if (err)
794 			break;
795 
796 		msgs_received++;
797 
798 		msg = virtqueue_get_buf(rvq, &len);
799 	}
800 
801 	dev_dbg(dev, "Received %u messages\n", msgs_received);
802 
803 	/* tell the remote processor we added another available rx buffer */
804 	if (msgs_received)
805 		virtqueue_kick(vrp->rvq);
806 }
807 
808 /*
809  * This is invoked whenever the remote processor completed processing
810  * a TX msg we just sent it, and the buffer is put back to the used ring.
811  *
812  * Normally, though, we suppress this "tx complete" interrupt in order to
813  * avoid the incurred overhead.
814  */
815 static void rpmsg_xmit_done(struct virtqueue *svq)
816 {
817 	struct virtproc_info *vrp = svq->vdev->priv;
818 
819 	dev_dbg(&svq->vdev->dev, "%s\n", __func__);
820 
821 	/* wake up potential senders that are waiting for a tx buffer */
822 	wake_up_interruptible(&vrp->sendq);
823 }
824 
825 /*
826  * Called to expose to user a /dev/rpmsg_ctrlX interface allowing to
827  * create endpoint-to-endpoint communication without associated RPMsg channel.
828  * The endpoints are rattached to the ctrldev RPMsg device.
829  */
830 static struct rpmsg_device *rpmsg_virtio_add_ctrl_dev(struct virtio_device *vdev)
831 {
832 	struct virtproc_info *vrp = vdev->priv;
833 	struct virtio_rpmsg_channel *vch;
834 	struct rpmsg_device *rpdev_ctrl;
835 	int err = 0;
836 
837 	vch = kzalloc(sizeof(*vch), GFP_KERNEL);
838 	if (!vch)
839 		return ERR_PTR(-ENOMEM);
840 
841 	/* Link the channel to the vrp */
842 	vch->vrp = vrp;
843 
844 	/* Assign public information to the rpmsg_device */
845 	rpdev_ctrl = &vch->rpdev;
846 	rpdev_ctrl->ops = &virtio_rpmsg_ops;
847 
848 	rpdev_ctrl->dev.parent = &vrp->vdev->dev;
849 	rpdev_ctrl->dev.release = virtio_rpmsg_release_device;
850 	rpdev_ctrl->little_endian = virtio_is_little_endian(vrp->vdev);
851 
852 	err = rpmsg_chrdev_register_device(rpdev_ctrl);
853 	if (err) {
854 		kfree(vch);
855 		return ERR_PTR(err);
856 	}
857 
858 	return rpdev_ctrl;
859 }
860 
861 static void rpmsg_virtio_del_ctrl_dev(struct rpmsg_device *rpdev_ctrl)
862 {
863 	if (!rpdev_ctrl)
864 		return;
865 	kfree(to_virtio_rpmsg_channel(rpdev_ctrl));
866 }
867 
868 static int rpmsg_probe(struct virtio_device *vdev)
869 {
870 	vq_callback_t *vq_cbs[] = { rpmsg_recv_done, rpmsg_xmit_done };
871 	static const char * const names[] = { "input", "output" };
872 	struct virtqueue *vqs[2];
873 	struct virtproc_info *vrp;
874 	struct virtio_rpmsg_channel *vch = NULL;
875 	struct rpmsg_device *rpdev_ns, *rpdev_ctrl;
876 	void *bufs_va;
877 	int err = 0, i;
878 	size_t total_buf_space;
879 	bool notify;
880 
881 	vrp = kzalloc(sizeof(*vrp), GFP_KERNEL);
882 	if (!vrp)
883 		return -ENOMEM;
884 
885 	vrp->vdev = vdev;
886 
887 	idr_init(&vrp->endpoints);
888 	mutex_init(&vrp->endpoints_lock);
889 	mutex_init(&vrp->tx_lock);
890 	init_waitqueue_head(&vrp->sendq);
891 
892 	/* We expect two virtqueues, rx and tx (and in this order) */
893 	err = virtio_find_vqs(vdev, 2, vqs, vq_cbs, names, NULL);
894 	if (err)
895 		goto free_vrp;
896 
897 	vrp->rvq = vqs[0];
898 	vrp->svq = vqs[1];
899 
900 	/* we expect symmetric tx/rx vrings */
901 	WARN_ON(virtqueue_get_vring_size(vrp->rvq) !=
902 		virtqueue_get_vring_size(vrp->svq));
903 
904 	/* we need less buffers if vrings are small */
905 	if (virtqueue_get_vring_size(vrp->rvq) < MAX_RPMSG_NUM_BUFS / 2)
906 		vrp->num_bufs = virtqueue_get_vring_size(vrp->rvq) * 2;
907 	else
908 		vrp->num_bufs = MAX_RPMSG_NUM_BUFS;
909 
910 	vrp->buf_size = MAX_RPMSG_BUF_SIZE;
911 
912 	total_buf_space = vrp->num_bufs * vrp->buf_size;
913 
914 	/* allocate coherent memory for the buffers */
915 	bufs_va = dma_alloc_coherent(vdev->dev.parent,
916 				     total_buf_space, &vrp->bufs_dma,
917 				     GFP_KERNEL);
918 	if (!bufs_va) {
919 		err = -ENOMEM;
920 		goto vqs_del;
921 	}
922 
923 	dev_dbg(&vdev->dev, "buffers: va %pK, dma %pad\n",
924 		bufs_va, &vrp->bufs_dma);
925 
926 	/* half of the buffers is dedicated for RX */
927 	vrp->rbufs = bufs_va;
928 
929 	/* and half is dedicated for TX */
930 	vrp->sbufs = bufs_va + total_buf_space / 2;
931 
932 	/* set up the receive buffers */
933 	for (i = 0; i < vrp->num_bufs / 2; i++) {
934 		struct scatterlist sg;
935 		void *cpu_addr = vrp->rbufs + i * vrp->buf_size;
936 
937 		rpmsg_sg_init(&sg, cpu_addr, vrp->buf_size);
938 
939 		err = virtqueue_add_inbuf(vrp->rvq, &sg, 1, cpu_addr,
940 					  GFP_KERNEL);
941 		WARN_ON(err); /* sanity check; this can't really happen */
942 	}
943 
944 	/* suppress "tx-complete" interrupts */
945 	virtqueue_disable_cb(vrp->svq);
946 
947 	vdev->priv = vrp;
948 
949 	rpdev_ctrl = rpmsg_virtio_add_ctrl_dev(vdev);
950 	if (IS_ERR(rpdev_ctrl)) {
951 		err = PTR_ERR(rpdev_ctrl);
952 		goto free_coherent;
953 	}
954 
955 	/* if supported by the remote processor, enable the name service */
956 	if (virtio_has_feature(vdev, VIRTIO_RPMSG_F_NS)) {
957 		vch = kzalloc(sizeof(*vch), GFP_KERNEL);
958 		if (!vch) {
959 			err = -ENOMEM;
960 			goto free_ctrldev;
961 		}
962 
963 		/* Link the channel to our vrp */
964 		vch->vrp = vrp;
965 
966 		/* Assign public information to the rpmsg_device */
967 		rpdev_ns = &vch->rpdev;
968 		rpdev_ns->ops = &virtio_rpmsg_ops;
969 		rpdev_ns->little_endian = virtio_is_little_endian(vrp->vdev);
970 
971 		rpdev_ns->dev.parent = &vrp->vdev->dev;
972 		rpdev_ns->dev.release = virtio_rpmsg_release_device;
973 
974 		err = rpmsg_ns_register_device(rpdev_ns);
975 		if (err)
976 			goto free_vch;
977 	}
978 
979 	/*
980 	 * Prepare to kick but don't notify yet - we can't do this before
981 	 * device is ready.
982 	 */
983 	notify = virtqueue_kick_prepare(vrp->rvq);
984 
985 	/* From this point on, we can notify and get callbacks. */
986 	virtio_device_ready(vdev);
987 
988 	/* tell the remote processor it can start sending messages */
989 	/*
990 	 * this might be concurrent with callbacks, but we are only
991 	 * doing notify, not a full kick here, so that's ok.
992 	 */
993 	if (notify)
994 		virtqueue_notify(vrp->rvq);
995 
996 	dev_info(&vdev->dev, "rpmsg host is online\n");
997 
998 	return 0;
999 
1000 free_vch:
1001 	kfree(vch);
1002 free_ctrldev:
1003 	rpmsg_virtio_del_ctrl_dev(rpdev_ctrl);
1004 free_coherent:
1005 	dma_free_coherent(vdev->dev.parent, total_buf_space,
1006 			  bufs_va, vrp->bufs_dma);
1007 vqs_del:
1008 	vdev->config->del_vqs(vrp->vdev);
1009 free_vrp:
1010 	kfree(vrp);
1011 	return err;
1012 }
1013 
1014 static int rpmsg_remove_device(struct device *dev, void *data)
1015 {
1016 	device_unregister(dev);
1017 
1018 	return 0;
1019 }
1020 
1021 static void rpmsg_remove(struct virtio_device *vdev)
1022 {
1023 	struct virtproc_info *vrp = vdev->priv;
1024 	size_t total_buf_space = vrp->num_bufs * vrp->buf_size;
1025 	int ret;
1026 
1027 	virtio_reset_device(vdev);
1028 
1029 	ret = device_for_each_child(&vdev->dev, NULL, rpmsg_remove_device);
1030 	if (ret)
1031 		dev_warn(&vdev->dev, "can't remove rpmsg device: %d\n", ret);
1032 
1033 	idr_destroy(&vrp->endpoints);
1034 
1035 	vdev->config->del_vqs(vrp->vdev);
1036 
1037 	dma_free_coherent(vdev->dev.parent, total_buf_space,
1038 			  vrp->rbufs, vrp->bufs_dma);
1039 
1040 	kfree(vrp);
1041 }
1042 
1043 static struct virtio_device_id id_table[] = {
1044 	{ VIRTIO_ID_RPMSG, VIRTIO_DEV_ANY_ID },
1045 	{ 0 },
1046 };
1047 
1048 static unsigned int features[] = {
1049 	VIRTIO_RPMSG_F_NS,
1050 };
1051 
1052 static struct virtio_driver virtio_ipc_driver = {
1053 	.feature_table	= features,
1054 	.feature_table_size = ARRAY_SIZE(features),
1055 	.driver.name	= KBUILD_MODNAME,
1056 	.driver.owner	= THIS_MODULE,
1057 	.id_table	= id_table,
1058 	.probe		= rpmsg_probe,
1059 	.remove		= rpmsg_remove,
1060 };
1061 
1062 static int __init rpmsg_init(void)
1063 {
1064 	int ret;
1065 
1066 	ret = register_virtio_driver(&virtio_ipc_driver);
1067 	if (ret)
1068 		pr_err("failed to register virtio driver: %d\n", ret);
1069 
1070 	return ret;
1071 }
1072 subsys_initcall(rpmsg_init);
1073 
1074 static void __exit rpmsg_fini(void)
1075 {
1076 	unregister_virtio_driver(&virtio_ipc_driver);
1077 }
1078 module_exit(rpmsg_fini);
1079 
1080 MODULE_DEVICE_TABLE(virtio, id_table);
1081 MODULE_DESCRIPTION("Virtio-based remote processor messaging bus");
1082 MODULE_LICENSE("GPL v2");
1083