1# SPDX-License-Identifier: GPL-2.0-only 2config ARCH_HAS_RESET_CONTROLLER 3 bool 4 5menuconfig RESET_CONTROLLER 6 bool "Reset Controller Support" 7 default y if ARCH_HAS_RESET_CONTROLLER 8 help 9 Generic Reset Controller support. 10 11 This framework is designed to abstract reset handling of devices 12 via GPIOs or SoC-internal reset controller modules. 13 14 If unsure, say no. 15 16if RESET_CONTROLLER 17 18config RESET_A10SR 19 tristate "Altera Arria10 System Resource Reset" 20 depends on MFD_ALTERA_A10SR 21 help 22 This option enables support for the external reset functions for 23 peripheral PHYs on the Altera Arria10 System Resource Chip. 24 25config RESET_ATH79 26 bool "AR71xx Reset Driver" if COMPILE_TEST 27 default ATH79 28 help 29 This enables the ATH79 reset controller driver that supports the 30 AR71xx SoC reset controller. 31 32config RESET_AXS10X 33 bool "AXS10x Reset Driver" if COMPILE_TEST 34 default ARC_PLAT_AXS10X 35 help 36 This enables the reset controller driver for AXS10x. 37 38config RESET_BCM6345 39 bool "BCM6345 Reset Controller" 40 depends on BMIPS_GENERIC || COMPILE_TEST 41 default BMIPS_GENERIC 42 help 43 This enables the reset controller driver for BCM6345 SoCs. 44 45config RESET_BERLIN 46 tristate "Berlin Reset Driver" 47 depends on ARCH_BERLIN || COMPILE_TEST 48 default m if ARCH_BERLIN 49 help 50 This enables the reset controller driver for Marvell Berlin SoCs. 51 52config RESET_BRCMSTB 53 tristate "Broadcom STB reset controller" 54 depends on ARCH_BRCMSTB || COMPILE_TEST 55 default ARCH_BRCMSTB 56 help 57 This enables the reset controller driver for Broadcom STB SoCs using 58 a SUN_TOP_CTRL_SW_INIT style controller. 59 60config RESET_BRCMSTB_RESCAL 61 tristate "Broadcom STB RESCAL reset controller" 62 depends on HAS_IOMEM 63 depends on ARCH_BRCMSTB || COMPILE_TEST 64 default ARCH_BRCMSTB 65 help 66 This enables the RESCAL reset controller for SATA, PCIe0, or PCIe1 on 67 BCM7216. 68 69config RESET_HSDK 70 bool "Synopsys HSDK Reset Driver" 71 depends on HAS_IOMEM 72 depends on ARC_SOC_HSDK || COMPILE_TEST 73 help 74 This enables the reset controller driver for HSDK board. 75 76config RESET_IMX7 77 tristate "i.MX7/8 Reset Driver" 78 depends on HAS_IOMEM 79 depends on SOC_IMX7D || (ARM64 && ARCH_MXC) || COMPILE_TEST 80 default y if SOC_IMX7D 81 select MFD_SYSCON 82 help 83 This enables the reset controller driver for i.MX7 SoCs. 84 85config RESET_INTEL_GW 86 bool "Intel Reset Controller Driver" 87 depends on X86 || COMPILE_TEST 88 depends on OF && HAS_IOMEM 89 select REGMAP_MMIO 90 help 91 This enables the reset controller driver for Intel Gateway SoCs. 92 Say Y to control the reset signals provided by reset controller. 93 Otherwise, say N. 94 95config RESET_K210 96 bool "Reset controller driver for Canaan Kendryte K210 SoC" 97 depends on (SOC_CANAAN || COMPILE_TEST) && OF 98 select MFD_SYSCON 99 default SOC_CANAAN 100 help 101 Support for the Canaan Kendryte K210 RISC-V SoC reset controller. 102 Say Y if you want to control reset signals provided by this 103 controller. 104 105config RESET_LANTIQ 106 bool "Lantiq XWAY Reset Driver" if COMPILE_TEST 107 default SOC_TYPE_XWAY 108 help 109 This enables the reset controller driver for Lantiq / Intel XWAY SoCs. 110 111config RESET_LPC18XX 112 bool "LPC18xx/43xx Reset Driver" if COMPILE_TEST 113 default ARCH_LPC18XX 114 help 115 This enables the reset controller driver for NXP LPC18xx/43xx SoCs. 116 117config RESET_MCHP_SPARX5 118 bool "Microchip Sparx5 reset driver" 119 depends on ARCH_SPARX5 || SOC_LAN966 || COMPILE_TEST 120 default y if SPARX5_SWITCH 121 select MFD_SYSCON 122 help 123 This driver supports switch core reset for the Microchip Sparx5 SoC. 124 125config RESET_MESON 126 tristate "Meson Reset Driver" 127 depends on ARCH_MESON || COMPILE_TEST 128 default ARCH_MESON 129 help 130 This enables the reset driver for Amlogic Meson SoCs. 131 132config RESET_MESON_AUDIO_ARB 133 tristate "Meson Audio Memory Arbiter Reset Driver" 134 depends on ARCH_MESON || COMPILE_TEST 135 help 136 This enables the reset driver for Audio Memory Arbiter of 137 Amlogic's A113 based SoCs 138 139config RESET_NPCM 140 bool "NPCM BMC Reset Driver" if COMPILE_TEST 141 default ARCH_NPCM 142 help 143 This enables the reset controller driver for Nuvoton NPCM 144 BMC SoCs. 145 146config RESET_OXNAS 147 bool 148 149config RESET_PISTACHIO 150 bool "Pistachio Reset Driver" 151 depends on MIPS || COMPILE_TEST 152 help 153 This enables the reset driver for ImgTec Pistachio SoCs. 154 155config RESET_QCOM_AOSS 156 tristate "Qcom AOSS Reset Driver" 157 depends on ARCH_QCOM || COMPILE_TEST 158 help 159 This enables the AOSS (always on subsystem) reset driver 160 for Qualcomm SDM845 SoCs. Say Y if you want to control 161 reset signals provided by AOSS for Modem, Venus, ADSP, 162 GPU, Camera, Wireless, Display subsystem. Otherwise, say N. 163 164config RESET_QCOM_PDC 165 tristate "Qualcomm PDC Reset Driver" 166 depends on ARCH_QCOM || COMPILE_TEST 167 help 168 This enables the PDC (Power Domain Controller) reset driver 169 for Qualcomm Technologies Inc SDM845 SoCs. Say Y if you want 170 to control reset signals provided by PDC for Modem, Compute, 171 Display, GPU, Debug, AOP, Sensors, Audio, SP and APPS. 172 173config RESET_RASPBERRYPI 174 tristate "Raspberry Pi 4 Firmware Reset Driver" 175 depends on RASPBERRYPI_FIRMWARE || (RASPBERRYPI_FIRMWARE=n && COMPILE_TEST) 176 default USB_XHCI_PCI 177 help 178 Raspberry Pi 4's co-processor controls some of the board's HW 179 initialization process, but it's up to Linux to trigger it when 180 relevant. This driver provides a reset controller capable of 181 interfacing with RPi4's co-processor and model these firmware 182 initialization routines as reset lines. 183 184config RESET_RZG2L_USBPHY_CTRL 185 tristate "Renesas RZ/G2L USBPHY control driver" 186 depends on ARCH_R9A07G044 || COMPILE_TEST 187 help 188 Support for USBPHY Control found on RZ/G2L family. It mainly 189 controls reset and power down of the USB/PHY. 190 191config RESET_SCMI 192 tristate "Reset driver controlled via ARM SCMI interface" 193 depends on ARM_SCMI_PROTOCOL || COMPILE_TEST 194 default ARM_SCMI_PROTOCOL 195 help 196 This driver provides support for reset signal/domains that are 197 controlled by firmware that implements the SCMI interface. 198 199 This driver uses SCMI Message Protocol to interact with the 200 firmware controlling all the reset signals. 201 202config RESET_SIMPLE 203 bool "Simple Reset Controller Driver" if COMPILE_TEST 204 default ARCH_ASPEED || ARCH_BCM4908 || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC 205 help 206 This enables a simple reset controller driver for reset lines that 207 that can be asserted and deasserted by toggling bits in a contiguous, 208 exclusive register space. 209 210 Currently this driver supports: 211 - Altera SoCFPGAs 212 - ASPEED BMC SoCs 213 - Bitmain BM1880 SoC 214 - Realtek SoCs 215 - RCC reset controller in STM32 MCUs 216 - Allwinner SoCs 217 - SiFive FU740 SoCs 218 219config RESET_SOCFPGA 220 bool "SoCFPGA Reset Driver" if COMPILE_TEST && (!ARM || !ARCH_INTEL_SOCFPGA) 221 default ARM && ARCH_INTEL_SOCFPGA 222 select RESET_SIMPLE 223 help 224 This enables the reset driver for the SoCFPGA ARMv7 platforms. This 225 driver gets initialized early during platform init calls. 226 227config RESET_SUNXI 228 bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI 229 default ARCH_SUNXI 230 select RESET_SIMPLE 231 help 232 This enables the reset driver for Allwinner SoCs. 233 234config RESET_TI_SCI 235 tristate "TI System Control Interface (TI-SCI) reset driver" 236 depends on TI_SCI_PROTOCOL 237 help 238 This enables the reset driver support over TI System Control Interface 239 available on some new TI's SoCs. If you wish to use reset resources 240 managed by the TI System Controller, say Y here. Otherwise, say N. 241 242config RESET_TI_SYSCON 243 tristate "TI SYSCON Reset Driver" 244 depends on HAS_IOMEM 245 select MFD_SYSCON 246 help 247 This enables the reset driver support for TI devices with 248 memory-mapped reset registers as part of a syscon device node. If 249 you wish to use the reset framework for such memory-mapped devices, 250 say Y here. Otherwise, say N. 251 252config RESET_UNIPHIER 253 tristate "Reset controller driver for UniPhier SoCs" 254 depends on ARCH_UNIPHIER || COMPILE_TEST 255 depends on OF && MFD_SYSCON 256 default ARCH_UNIPHIER 257 help 258 Support for reset controllers on UniPhier SoCs. 259 Say Y if you want to control reset signals provided by System Control 260 block, Media I/O block, Peripheral Block. 261 262config RESET_UNIPHIER_GLUE 263 tristate "Reset driver in glue layer for UniPhier SoCs" 264 depends on (ARCH_UNIPHIER || COMPILE_TEST) && OF 265 default ARCH_UNIPHIER 266 select RESET_SIMPLE 267 help 268 Support for peripheral core reset included in its own glue layer 269 on UniPhier SoCs. Say Y if you want to control reset signals 270 provided by the glue layer. 271 272config RESET_ZYNQ 273 bool "ZYNQ Reset Driver" if COMPILE_TEST 274 default ARCH_ZYNQ 275 help 276 This enables the reset controller driver for Xilinx Zynq SoCs. 277 278source "drivers/reset/sti/Kconfig" 279source "drivers/reset/hisilicon/Kconfig" 280source "drivers/reset/tegra/Kconfig" 281 282endif 283